diff --git a/.gitignore b/.gitignore index fd3a355..a36edcc 100644 --- a/.gitignore +++ b/.gitignore @@ -112,3 +112,7 @@ all.config # Kdevelop4 *.kdev4 + +# dtb objects +*.dtb +*.dtbo diff --git b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr new file mode 100644 index 0000000..e2df613 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr @@ -0,0 +1,63 @@ +What: /sys/devices/platform/bone_capemgr/slots +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: + READ: + Describe the state of all the slots of the beaglebone capemgr. + Each line of the output describes a slot: + The slot format is as following: + : [P-][F-][O-][l-][L-][D-] \ + ,, + , + + Where the flags are: + P: Slot has been probed + F: Slot has failed probing (i.e. no EEPROM detected) + O: Slot has been overridden by the user + l: Slot is current loading + L: Slot has completed loading and is ready + D: Slot has been disabled + + Example: + 0: P---L- -1 BeagleBone RS232 CAPE,00A1,Beagleboardtoys,BB-BONE-SERL-03 + 1: PF---- -1 + 2: PF---- -1 + 3: PF---- -1 + + WRITE: + Writing a string of the form [:version] issues a request to + load a firmware blob containing an overlay. The name of the firmware blob + is -[version|00A0].dtbo. This act is defined as a slot override. + + Writing a negative slot id removes the slot if it was an overridden one, or + unloads a slot that was probed. + +What: /sys/devices/platform/bone_capemgr/baseboard/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed base board EEPROM field; one of: + board-name - board-name as stored in cape EEPROM + dc-supplied - whether the cape draws or supplies DC + eeprom-format-revision - EEPROM format rev, only 00A0 supported + header - header; should be 'aa 55 33 ee' + manufacturer - manufacturer string + part-number - part-number of the cape + serial-number - serial number of the cape + version - version of the cape, i.e. 00A0 + number-of-pins - displayed but ignored + pin-usage - displayed but ignored + sys-5v - displayed but ignored + vdd-3v3exp - displayed but ignored + vdd-5v - displayed but ignored +What: /sys/devices/platform/bone_capemgr/slot-/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed cape's EEPROM field; the field is one of: + board-name - baseboard name i.e. A335BNLT + header - header; should be 'aa 55 33 ee' + revision - baseboard revision + serial-number - baseboard serial number + config-option - displayed but ignored diff --git b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays new file mode 100644 index 0000000..88d1549 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays @@ -0,0 +1,52 @@ +What: /sys/firmware/devicetree/overlays/ +Date: October 2015 +Contact: Pantelis Antoniou +Description: + This directory contains the applied device tree overlays of + the running system, as directories of the overlay id. + +What: /sys/firmware/devicetree/overlays/enable +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The master enable switch, by default is 1, and when + set to 0 it cannot be re-enabled for security reasons. + + The discussion about this switch takes place in: + http://comments.gmane.org/gmane.linux.drivers.devicetree/101871 + + Kees Cook: + "Coming from the perspective of drawing a bright line between + kernel and the root user (which tends to start with disabling + kernel module loading), I would say that there at least needs + to be a high-level one-way "off" switch for the interface so + that systems that have this interface can choose to turn it off + during initial boot, etc." + +What: /sys/firmware/devicetree/overlays/ +Date: October 2015 +Contact: Pantelis Antoniou +Description: + Each directory represents an applied overlay, containing + the following attribute files. + +What: /sys/firmware/devicetree/overlays//can_remove +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The attribute set to 1 means that the overlay can be removed, + while 0 means that the overlay is being overlapped therefore + removal is prohibited. + +What: /sys/firmware/devicetree/overlays/// +Date: October 2015 +Contact: Pantelis Antoniou +Description: + Each of these directories contain information about of the + particular overlay fragment. + +What: /sys/firmware/devicetree/overlays///target +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The full-path of the target of the fragment diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 66422d6..635ddc5 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -24,6 +24,8 @@ Optional properties: - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init - ti,no-idle: When present, the module is never allowed to idle. +- ti,deassert-hard-reset: list of hwmod and hardware reset line name pairs + (ascii strings) to be deasserted upon device instantiation. Example: diff --git b/Documentation/devicetree/bindings/misc/bone_capemgr.txt b/Documentation/devicetree/bindings/misc/bone_capemgr.txt new file mode 100644 index 0000000..7e4fbc9 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/bone_capemgr.txt @@ -0,0 +1,111 @@ +* Beaglebone cape manager driver + +Required properties: +- compatible: "ti,bone-capemgr" +- eeprom: phandle to the EEPROM baseboard. + The EEPROM framework interface is use to obtain the data. + +Required children nodes: + +- baseboardmaps: Contains nodes, which each of the them defines a mapping from + the baseboard EEPROM board-name ID to a DT friendly compatible + string. + + - board-name: The baseboard EEPROM board name, i.e. A335BONE for the + original beaglebone white. + - compatible-name: The DT friendly compatible string to be used for matching + compatible capes, i.e. "ti,beaglebone" + + + - nvmem-cells: Defines the phandles of the nvmem cells of the baseboard and the + slots. + - nvmem-cells: Defines the names of the nvmem cells. Required to have at + least a baseboard cell name. + + - #slots: Defines how many slots are there. + +- Example of a beaglebone cape-manager: + +bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cell = <&baseboard_data + &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; +}; + +The format of the cape to be loaded is in a standard overlay format with +the following root properties that are interpreted by the cape manager: + +Required properties: + - compatible: Should be compatible to the baseboard according to the + baseboard map value, i.e. "ti,beaglebone". + - part-numer: Should contain the part-number as stored in the EEPROM. + - version: Should contain a list of all the version that are supported + by the single cape dtbo, i.e. "00A1". + +Optional properties: + - exclusive-use: A string list which state the resources this cape requires. + No processing or matching to anything regarding the internal + kernel state is performed; it's purpose is to guard against + conflicts with other capes. + - priority: A priority to be assigned when loading a cape. A lower value + has higher priority. The purpose of the priority is to control + which cape is loaded first in case of a conflict. + +- Example of a serial cape: + +/dts-v1/; +/plugin/; +/ { + compatible = "ti,beaglebone", "ti,beaglebone-black"; + + /* identification */ + part-number = "BB-BONE-SERL-03"; + version = "00A1"; + + /* state the resources this cape uses */ + exclusive-use = + /* the pin header uses */ + "P9.21", /* uart2_txd */ + "P9.22", /* uart2_rxd */ + /* the hardware ip uses */ + "uart2"; + + fragment@0 { + target = <&am33xx_pinmux>; + __overlay__ { + bb_uart2_pins: pinmux_bb_uart2_pins { + pinctrl-single,pins = < + 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ + 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ + >; + }; + }; + }; + + fragment@1 { + target = <&uart2>; + __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&bb_uart2_pins>; + }; + }; +}; diff --git b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt new file mode 100644 index 0000000..e12f4e5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt @@ -0,0 +1,86 @@ +Texas Instruments I/O Delay module configuration pinctrl definition + +Used in conjunction with Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt + +Required Properties: +- compatible: Should be: + "ti,dra7-iodelay" - I/O delay configuration for DRA7 +- reg - must be the register address range of IODelay module +- #address-cells = <1>; +- #size-cells = <0>; + +Important note: Use of "ti,dra7-iodelay" compatible definition need to be +carefully evaluated due to the expectation of glitch during configuration. + +Example: + +dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; +}; + +Configuration definition follows similar model as the pinctrl-single: +The groups of pin configuration are defined under "pinctrl-single,pins" + +&dra7_iodelay_core { + mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf { + pinctrl-single,pins = < + 0x18c (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A19_IN */ + 0x1a4 (A_DELAY(265) | G_DELAY(360)) /* CFG_GPMC_A20_IN */ + 0x1b0 (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A21_IN */ + 0x1bc (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A22_IN */ + 0x1c8 (A_DELAY(287) | G_DELAY(420)) /* CFG_GPMC_A23_IN */ + 0x1d4 (A_DELAY(144) | G_DELAY(240)) /* CFG_GPMC_A24_IN */ + 0x1e0 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_A25_IN */ + 0x1ec (A_DELAY(120) | G_DELAY(0)) /* CFG_GPMC_A26_IN */ + 0x1f8 (A_DELAY(120) | G_DELAY(180)) /* CFG_GPMC_A27_IN */ + 0x360 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_CS1_IN */ + >; + }; +}; + +Usage in conjunction with pinctrl single: + +For a complete description of the pins both the regular muxing as well as the +iodelay configuration is necessary. For example: + +&dra7_pmx_core { + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + 0x9c (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + 0xb0 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + 0xa0 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + 0xa4 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + 0xa8 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + 0xac (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + 0x8c (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + 0x90 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + 0x94 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + 0x98 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; + +&dra7_iodelay_core { + mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf { + pinctrl-single,pins = < + 0x18c (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A19_IN */ + 0x1a4 (A_DELAY(265) | G_DELAY(360)) /* CFG_GPMC_A20_IN */ + 0x1b0 (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A21_IN */ + 0x1bc (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A22_IN */ + 0x1c8 (A_DELAY(287) | G_DELAY(420)) /* CFG_GPMC_A23_IN */ + 0x1d4 (A_DELAY(144) | G_DELAY(240)) /* CFG_GPMC_A24_IN */ + 0x1e0 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_A25_IN */ + 0x1ec (A_DELAY(120) | G_DELAY(0)) /* CFG_GPMC_A26_IN */ + 0x1f8 (A_DELAY(120) | G_DELAY(180)) /* CFG_GPMC_A27_IN */ + 0x360 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_CS1_IN */ + >; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default &mmc2_iodelay_3v3_conf>; +}; diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 936ab5b..f5561ac 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -42,6 +42,9 @@ Optional properties: - auto-flow-control: one way to enable automatic flow control support. The driver is allowed to detect support for the capability even without this property. +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD + line respectively. It will use specified GPIO instead of the peripheral + function pin for the UART feature. If unsure, don't specify this property. Note: * fsl,ns16550: @@ -63,3 +66,19 @@ Example: interrupts = <10>; reg-shift = <2>; }; + +Example for OMAP UART using GPIO-based modem control signals: + + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git b/Documentation/devicetree/bindings/usb/generic-onboard-device.txt b/Documentation/devicetree/bindings/usb/generic-onboard-device.txt new file mode 100644 index 0000000..4dd7bca --- /dev/null +++ b/Documentation/devicetree/bindings/usb/generic-onboard-device.txt @@ -0,0 +1,31 @@ +Generic Onboard USB Device + +The node should be located at USB host controller's node or +any USB HUB's node. + +Required properties: +- compatible: should be "generic-onboard-device" + +Optional properties: +- clocks: the input clock for USB device. +- clock-frequency: the frequency for device's clock. +- reset-gpios: Should specify the GPIO for reset. +- reset-duration-us: the duration for assert reset signal, the time unit + is microsecond. + +Example: + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + hub: usb2415@01 { + compatible = "generic-onboard-device"; + reg = <0x01>; + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <10>; + }; +}; diff --git b/Documentation/devicetree/configfs-overlays.txt b/Documentation/devicetree/configfs-overlays.txt new file mode 100644 index 0000000..5fa43e0 --- /dev/null +++ b/Documentation/devicetree/configfs-overlays.txt @@ -0,0 +1,31 @@ +Howto use the configfs overlay interface. + +A device-tree configfs entry is created in /config/device-tree/overlays +and and it is manipulated using standard file system I/O. +Note that this is a debug level interface, for use by developers and +not necessarily something accessed by normal users due to the +security implications of having direct access to the kernel's device tree. + +* To create an overlay you mkdir the directory: + + # mkdir /config/device-tree/overlays/foo + +* Either you echo the overlay firmware file to the path property file. + + # echo foo.dtbo >/config/device-tree/overlays/foo/path + +* Or you cat the contents of the overlay to the dtbo file + + # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo + +The overlay file will be applied, and devices will be created/destroyed +as required. + +To remove it simply rmdir the directory. + + # rmdir /config/device-tree/overlays/foo + +The rationalle of the dual interface (firmware & direct copy) is that each is +better suited to different use patterns. The firmware interface is what's +intended to be used by hardware managers in the kernel, while the copy interface +make sense for developers (since it avoids problems with namespaces). diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index d418a6c..00ede57 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -100,6 +100,14 @@ Finally, if you need to remove all overlays in one-go, just call of_overlay_destroy_all() which will remove every single one in the correct order. +If your board has multiple slots/places where a single overlay can work +and each slot is defined by a node, you can use the of_overlay_create_indirect() +method to select the target. + +For overlays on probeable busses, use the of_overlay_create_target_root() method +in which you supply a device node as a target root, and which all target +references in the overlay are performed relative to that node. + Overlay DTS Format ------------------ @@ -113,6 +121,11 @@ The DTS of an overlay should have the following format: target=; /* phandle target of the overlay */ or target-path="/path"; /* target path of the overlay */ + or + target-indirect { /* indirect target selector */ + foo { target|target-path ... }; + bar { .... }; + }; __overlay__ { property-a; /* add property-a to the target */ @@ -131,3 +144,11 @@ Using the non-phandle based target method allows one to use a base DT which does not contain a __symbols__ node, i.e. it was not compiled with the -@ option. The __symbols__ node is only required for the target= method, since it contains the information required to map from a phandle to a tree location. + +The indirect target requires the use of a selector target on the call to +of_overlay_create_indirect(). I.e. passing the "foo" id will select the target +in the foo node, "bar" in bar node, etc. + +Note that when using the target root create method all target references must +lie under the target root node. I.e. the overlay is not allowed to 'break' out +of the root. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 21e4b48..590d928 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -90,6 +90,7 @@ parameter is applicable: NET Appropriate network support is enabled. NUMA NUMA support is enabled. NFS Appropriate NFS support is enabled. + OF Open Firmware support (device tree) is enabled. OSS OSS sound support is enabled. PV_OPS A paravirtualized kernel is enabled. PARIDE The ParIDE (parallel port IDE) subsystem is enabled. @@ -2674,6 +2675,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. This can be set from sysctl after boot. See Documentation/sysctl/vm.txt for details. + of_overlay_disable [OF] Disable device tree overlays at boot time. + ohci1394_dma=early [HW] enable debugging via the ohci1394 driver. See Documentation/debugging-via-ohci1394.txt for more info. diff --git b/Documentation/misc-devices/bone_capemgr.txt b/Documentation/misc-devices/bone_capemgr.txt new file mode 100644 index 0000000..2a8c766 --- /dev/null +++ b/Documentation/misc-devices/bone_capemgr.txt @@ -0,0 +1,63 @@ +--------------------------- + Beaglebone Cape-Manager +--------------------------- + +The beaglebone cape manager driver allows the automatic use of external +peripheral capes to be automatically supported by Linux without any manual +setup required by the user. + +Each beaglebone cape should contain an EEPROM that describes +it in a fixed I2C address on the i2c2 bus of the baseboard. +The format of the EEPROM is defined in the beaglebone reference +manual at: +http://beagleboard.org/static/beaglebone/latest/Docs/Hardware/BONE_SRM.pdf + +Reading the part number and revision information the manager +requests a firmware file formatted as a device tree overlay blob. + +Applying the overlay the devices are instantiated and the cape is +ready to be used. + +For instance if the part-number is BB-BONE-SERL-03 and the version is 00A1 +the firmware file requested will be BB-BONE-SERL-03-00A1-00A1.dtbo +It will be located by the in-kernel firmware +loader in the usual place, i.e. /lib/firmware/`uname -r`, /lib/firmware etc. + +The driver supports the following parameters (either as part of the kernel +command line or supplied at module insertion time). + +disable_partno: A comma delimited list of PART-NUMBER[:REV] of + disabled capes. +enable_partno: A comma delimited list of PART-NUMBER[:REV[:PRIO]] of + enabled capes. +boot_scan_period: The boot scan period in ms. When the cape manager is built-in + the kernel image, the firmware loader cannot find the files + before the rootfs is mounted. This parameter controls the + period with which the boot state is checked in that case. + +There's a sysfs control interface which is defined at the ABI documentation +area. + +Theory of operation: +-------------------- + +On driver probe the I2C EEPROM of the baseboard is read and information about +the current baseboard is retrieved. This information includes the mapping from +baseboard board name to DT friendly compatible string. I.e. the "A335BONE" board +name from EEPROM is mapped to the "ti,beaglebone" compatible string which should +be present in the dtbo to be loaded. + +Afterwards the EEPROMs declared in each slot are probed, and the EEPROMs found +are decoded keeping track the cape part-number and version data. + +Using the part-number and version a firmware file is requested (the firmware +file requested is -.dtbo). + +The dtbo is unflattend and the resulting device tree is matched against a +compatible baseboard, and in case of multiple parallel loading capes the +priorities defined are honored. That means that when there are multiple capes +being loaded in parallel the ones with the lowest priority number are loaded +first. + +Applying the device tree overlay makes the cape operational, as if it was part +of the kernel's booting device tree. diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 5d1128b..1993652 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -306,10 +306,49 @@ Network device features: Passed by reference. +Command from struct task_struct + + %pT ls + + For printing executable name excluding path from struct + task_struct. + + Passed by reference. + +Device tree nodes: + + %pO[fnpPcCFr] + + For printing device tree nodes. The optional arguments are: + f device node full_name + n device node name + p device node phandle + P device node path spec (name + @unit) + F device node flags + c major compatible string + C full compatible string + r node reference count + Without any arguments prints full_name (same as %pOf) + The separator when using multiple arguments is '|' + + Examples: + + %pO /foo/bar@0 - Node full name + %pOf /foo/bar@0 - Same as above + %pOfp /foo/bar@0|10 - Node full name + phandle + %pOfcF /foo/bar@0|foo,device|--P- - Node full name + + major compatible string + + node flags + D - dynamic + d - detached + P - Populated + B - Populated bus + + Passed by reference + If you add other %p extensions, please extend lib/test_printf.c with one or more test cases, if at all feasible. - Thank you for your cooperation and attention. diff --git a/MAINTAINERS b/MAINTAINERS index 5a389bc..96aee2b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2184,6 +2184,14 @@ W: https://linuxtv.org S: Supported F: drivers/media/platform/sti/bdisp +BEAGLEBONE CAPEMANAGER +M: Pantelis Antoniou +S: Maintained +F: drivers/misc/beaglebone-capemgr.c +F: Documentation/misc-devices/bone_capemgr.txt +F: Documentation/devicetree/bindings/misc/bone_capemgr.txt +F: Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr + BEFS FILE SYSTEM S: Orphan F: Documentation/filesystems/befs.txt @@ -11395,6 +11403,13 @@ S: Maintained F: Documentation/usb/ohci.txt F: drivers/usb/host/ohci* +USB Generic Onboard Device Driver +M: Peter Chen +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/misc/generic_onboard_device.c + USB OTG FSM (Finite State Machine) M: Peter Chen T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9eca7ae..d4273d4 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -27,6 +27,10 @@ export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70..40df46b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,9 +1,15 @@ ifeq ($(CONFIG_OF),y) +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb + dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb + # Keep at91 dtb files sorted alphabetically for each SoC dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91rm9200ek.dtb \ @@ -311,6 +317,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-sabresd-wl1835.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6u-801x.dtb \ imx6dl-tx6u-811x.dtb \ @@ -320,6 +327,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ + imx6q-ccimx6sbc.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-dmo-edmqmx6.dtb \ @@ -340,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ + imx6q-sabresd-wl1835.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-tx6q-1010.dtb \ @@ -352,6 +361,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard-revb1.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ + imx6sl-evk-wl1835.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ @@ -472,6 +482,23 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-sancloud-bbe.dtb \ + am335x-boneblack-audio.dtb \ + am335x-boneblack-bbb-exp-r.dtb \ + am335x-boneblack-bbb-exp-c.dtb \ + am335x-boneblack-bbbmini.dtb \ + am335x-boneblack-wl1835mod.dtb \ + am335x-boneblack-cape-bone-argus.dtb \ + am335x-bone-cape-bone-argus.dtb \ + am335x-arduino-tre.dtb \ + am335x-bonegreen-wireless.dtb \ + am335x-olimex-som.dtb \ + am335x-abbbi.dtb \ + am335x-bonegreen-overlay.dtb \ + am335x-boneblack-overlay.dtb \ + am335x-boneblack-nhdmi-overlay.dtb \ + am335x-boneblack-hdmi-overlay.dtb \ + am335x-boneblack-emmc-overlay.dtb \ am335x-bonegreen.dtb \ am335x-chiliboard.dtb \ am335x-cm-t335.dtb \ @@ -489,6 +516,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ + omap4-panda-es-b3.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ diff --git b/arch/arm/boot/dts/am335x-abbbi.dts b/arch/arm/boot/dts/am335x-abbbi.dts new file mode 100644 index 0000000..5fa9349 --- /dev/null +++ b/arch/arm/boot/dts/am335x-abbbi.dts @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright 2015 Konsulko Group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "Arrow BeagleBone Black Industrial"; + compatible = "arrow,am335x-abbbi", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + adi_hdmi_bbbi_pins: adi_hdmi_bbbi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + adi_hdmi_bbbi_off_pins: adi_hdmi_bbbi_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; + + mcasp0_pins_sleep: mcasp0_pins_sleep { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + adv7511w { + compatible = "adi,adv7511w"; + reg = <0x39>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&adi_hdmi_bbbi_pins>; + pinctrl-1 = <&adi_hdmi_bbbi_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; + +&mcasp0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp0_pins>; + pinctrl-1 = <&mcasp0_pins_sleep>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + hdmi_audio: hdmi_audio@0 { + compatible = "linux,hdmi-audio"; + status = "okay"; + }; + + sound { + compatible = "ti,beaglebone-black-audio"; + ti,model = "TI BeagleBone Black"; + ti,audio-codec = <&hdmi_audio>; + ti,mcasp-controller = <&mcasp0>; + ti,audio-routing = + "HDMI Out", "TX"; + clocks = <&clk_mcasp0>; + clock-names = "mclk"; + }; +}; + +&rtc { + system-power-controller; +}; diff --git b/arch/arm/boot/dts/am335x-arduino-tre.dts b/arch/arm/boot/dts/am335x-arduino-tre.dts new file mode 100644 index 0000000..0e6b364 --- /dev/null +++ b/arch/arm/boot/dts/am335x-arduino-tre.dts @@ -0,0 +1,577 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" + +/ { + model = "TI AM335x Arduino Tre"; + compatible = "ti,am335x-arduino-tre", "ti,am335x-boneblack", "ti,am335x-bone", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 512 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "arduino_tre:yel:usr0"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@1 { + label = "arduino_tre:red:usr1"; + gpios = <&gpio1 22 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@2 { + label = "arduino_tre:blu:usr2"; + gpios = <&gpio1 23 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@3 { + label = "arduino_tre:grn:usr3"; + gpios = <&gpio1 24 0>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + }; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE2L", "Line In", + "LINE2R", "Line In"; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + + can_bus_pins: pinmux_can_bus_pins { + pinctrl-single,pins = < + 0x120 0x31 /* DCAN0_RX MODE1 */ + 0x11c 0x01 /* DCAN0_TX MODE1 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emac_rmii1_pins: pinmux_emac_rmii1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 0x70 /* i2c0_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + 0x18c 0x70 /* i2c0_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 0x72 /*spi0_d1-i2c1_sda,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + 0x15c 0x72 /*spi0_cs0-i2c1_scl,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x150 0x72 /*spi0_scl.i2c2_sda,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + 0x154 0x72 /*spi0_d0.i2c2_scl,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0FC (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1A0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + tre_ehrpwm1_pins: pinmux_tre_ehrpwm1_pins { + pinctrl-single,pins = < + 0x48 0x06 /* PWM1A ~102 MODE6 */ + 0x4c 0x06 /* PWM1B ~103 MODE6 */ + >; + }; + + tre_ehrpwm2_pins: pinmux_tre_ehrpwm2_pins { + pinctrl-single,pins = < + 0x20 0x04 /* PWM2A ~100 MODE4 */ + 0x24 0x04 /* PWM2B ~101 MODE4 */ + >; + }; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + tre_audio_pins: pinmux_tre_audio_pins { + pinctrl-single,pins = < + 0x1ac 0x00 /*mcasp0_ahclkx (AUD_MCLK)->12MHz, INPUT | MODE0*/ + 0x190 0x20 /* mcasp0_aclkx (AUD_BCLK)->, INPUT | MODE0*/ + 0x194 0x20 /* mcasp0_fsx (AUD_FSX)-> , INPUT | MODE0*/ + 0x198 0x20 /* mcasp0_axr0 (AUD_DIN)<-, INPUT | MODE0*/ + 0x19c 0x22 /* mcasp0_ahclkr-_axr2 (AUD_DOUT)->, | MODE2*/ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x168 0x14 /* MOSI1 OUTPUT_PULLUP | MODE0 */ + 0x16c 0x34 /* MISO1 INPUT_PULLUP | MODE0 */ + 0x108 0x12 /* SCK1 OUTPUT_PULLUP | MODE0 */ + 0x164 0x12 /* SS1 OUTPUT_PULLUP | MODE0 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x180 0x30 /* UART1_rxd PULL_UP | MODE0 */ + 0x184 0x00 /* UART1_txd MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x12c 0x31 /* UART2_rxd PULL_UP | MODE1 */ + 0x130 0x01 /* UART2_txd MODE1 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x70 0x36 /* UART4_rxd PULL_UP | MODE6 */ + 0x74 0x06 /* UART4_txd MODE6 */ + >; + }; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&can_bus_pins>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + tps: tps@24 { + reg = <0x24>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + + tlv320aic3x: tlv320aic3x@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + status = "okay"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + +&epwmss1 { + status = "okay"; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm1_pins>; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm2_pins>; +}; + +&lcdc { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; + + control@44e10620 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@47402000 { + status = "okay"; + }; +}; + +&tps { + compatible = "ti,tps65217"; + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-always-on; + }; + + rtc@44e3e000 { + ti,system-power-controller; + }; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&tre_audio_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 2 0 1 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_rmii1_pins>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-bone-argus.dtsi b/arch/arm/boot/dts/am335x-bone-argus.dtsi new file mode 100644 index 0000000..21afad3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-argus.dtsi @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/ { + ocp { + P8_07_pinmux { + /* gpio2[2] */ + status = "disabled"; + }; + P8_08_pinmux { + /* gpio2[3] */ + status = "disabled"; + }; + P8_09_pinmux { + /* gpio2[5] */ + status = "disabled"; + }; + P8_10_pinmux { + /* gpio2[4] */ + status = "disabled"; + }; + P9_11_pinmux { + /* gpio0[30] */ + status = "disabled"; + }; + P9_17_pinmux { + /* gpio0[5] */ + status = "disabled"; + }; + P9_18_pinmux { + /* gpio0[4] */ + status = "disabled"; + }; + P9_41_pinmux { + /* gpio0[20] */ + status = "disabled"; + }; + P9_42_pinmux { + /* gpio0[7] */ + status = "disabled"; + }; + }; +}; + +/ { + argus-ups { + compatible = "argus-ups"; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&argus_ups_pins>; /* Refer to previous label */ + /* This section communicates the gpio numbers to the driver module */ + /* Note that gpio controllers appear to be numbered from 1-n here rather than 0-(n-1)????? */ + gpios = <&gpio0 30 0>, /* Request */ + <&gpio0 5 0>, /* Acknowledge */ + <&gpio0 4 0>, /* Watchdog */ + <&gpio2 2 0>, /* LED 1 Green */ + <&gpio2 3 0>, /* LED 1 Red */ + <&gpio2 5 0>, /* LED 2 Green */ + <&gpio2 4 0>, /* LED 2 Red */ + <&gpio0 20 0>, /* General Output #1 */ + <&gpio0 7 0>; /* General Output #2 */ + debug = <1>; + shutdown = <1>; + }; +}; + +&am33xx_pinmux { + argus_ups_pins: pinmux_argus_ups_pins { /* Set up pinmux */ + pinctrl-single,pins = < + 0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_d1.gpio0_4 */ + 0x090 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_advn_ale.gpio_2 */ + 0x094 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + 0x09c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + 0x098 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_gpmc_wen.gpio2_4 */ + 0x1b4 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0_20 */ + 0x164 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts new file mode 100644 index 0000000..82218f5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; + +#include "am335x-bone-argus.dtsi" diff --git b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi new file mode 100644 index 0000000..fa5311f --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi @@ -0,0 +1,344 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi new file mode 100644 index 0000000..781e33f --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi @@ -0,0 +1,2052 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + /* P8_02 GND */ + /* P8_03 (ZCZ ball R9 ) emmc */ + /* P8_04 (ZCZ ball T9 ) emmc */ + /* P8_05 (ZCZ ball R8 ) emmc */ + /* P8_06 (ZCZ ball T8 ) emmc */ + + /* P8_07 (ZCZ ball R7 ) */ + P8_07_default_pin: pinmux_P8_07_default_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { + pinctrl-single,pins = <0x090 0x2F>; }; /* Mode 7, RxActive */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { + pinctrl-single,pins = <0x090 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { + pinctrl-single,pins = <0x090 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_08 (ZCZ ball T7 ) */ + P8_08_default_pin: pinmux_P8_08_default_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { + pinctrl-single,pins = <0x094 0x2F>; }; /* Mode 7, RxActive */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { + pinctrl-single,pins = <0x094 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { + pinctrl-single,pins = <0x094 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_09 (ZCZ ball T6 ) */ + P8_09_default_pin: pinmux_P8_09_default_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { + pinctrl-single,pins = <0x09c 0x2F>; }; /* Mode 7, RxActive */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { + pinctrl-single,pins = <0x09c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { + pinctrl-single,pins = <0x09c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_10 (ZCZ ball U6 ) */ + P8_10_default_pin: pinmux_P8_10_default_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { + pinctrl-single,pins = <0x098 0x2F>; }; /* Mode 7, RxActive */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { + pinctrl-single,pins = <0x098 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { + pinctrl-single,pins = <0x098 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_11 (ZCZ ball R12) */ + P8_11_default_pin: pinmux_P8_11_default_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { + pinctrl-single,pins = <0x034 0x2F>; }; /* Mode 7, RxActive */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { + pinctrl-single,pins = <0x034 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { + pinctrl-single,pins = <0x034 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { + pinctrl-single,pins = <0x034 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_12 (ZCZ ball T12) */ + P8_12_default_pin: pinmux_P8_12_default_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { + pinctrl-single,pins = <0x030 0x2F>; }; /* Mode 7, RxActive */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { + pinctrl-single,pins = <0x030 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { + pinctrl-single,pins = <0x030 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { + pinctrl-single,pins = <0x030 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_13 (ZCZ ball T10) */ + P8_13_default_pin: pinmux_P8_13_default_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { + pinctrl-single,pins = <0x024 0x2F>; }; /* Mode 7, RxActive */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { + pinctrl-single,pins = <0x024 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { + pinctrl-single,pins = <0x024 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_14 (ZCZ ball T11) */ + P8_14_default_pin: pinmux_P8_14_default_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_gpio_pin: pinmux_P8_14_gpio_pin { + pinctrl-single,pins = <0x028 0x2F>; }; /* Mode 7, RxActive */ + P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { + pinctrl-single,pins = <0x028 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_pwm_pin: pinmux_P8_14_pwm_pin { + pinctrl-single,pins = <0x028 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_15 (ZCZ ball U13) */ + P8_15_default_pin: pinmux_P8_15_default_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { + pinctrl-single,pins = <0x03c 0x2F>; }; /* Mode 7, RxActive */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { + pinctrl-single,pins = <0x03c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { + pinctrl-single,pins = <0x03c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { + pinctrl-single,pins = <0x03c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_16 (ZCZ ball V13) */ + P8_16_default_pin: pinmux_P8_16_default_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { + pinctrl-single,pins = <0x038 0x2F>; }; /* Mode 7, RxActive */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { + pinctrl-single,pins = <0x038 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { + pinctrl-single,pins = <0x038 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { + pinctrl-single,pins = <0x038 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_17 (ZCZ ball U12) */ + P8_17_default_pin: pinmux_P8_17_default_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_gpio_pin: pinmux_P8_17_gpio_pin { + pinctrl-single,pins = <0x02c 0x2F>; }; /* Mode 7, RxActive */ + P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { + pinctrl-single,pins = <0x02c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_pwm_pin: pinmux_P8_17_pwm_pin { + pinctrl-single,pins = <0x02c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_18 (ZCZ ball V12) */ + P8_18_default_pin: pinmux_P8_18_default_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { + pinctrl-single,pins = <0x08c 0x2F>; }; /* Mode 7, RxActive */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { + pinctrl-single,pins = <0x08c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_19 (ZCZ ball U10) */ + P8_19_default_pin: pinmux_P8_19_default_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { + pinctrl-single,pins = <0x020 0x2F>; }; /* Mode 7, RxActive */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { + pinctrl-single,pins = <0x020 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { + pinctrl-single,pins = <0x020 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_20 (ZCZ ball V9 ) emmc */ + /* P8_21 (ZCZ ball U9 ) emmc */ + /* P8_22 (ZCZ ball V8 ) emmc */ + /* P8_23 (ZCZ ball U8 ) emmc */ + /* P8_24 (ZCZ ball V7 ) emmc */ + /* P8_25 (ZCZ ball U7 ) emmc */ + + /* P8_26 (ZCZ ball V6 ) */ + P8_26_default_pin: pinmux_P8_26_default_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pin: pinmux_P8_26_gpio_pin { + pinctrl-single,pins = <0x07c 0x2F>; }; /* Mode 7, RxActive */ + P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { + pinctrl-single,pins = <0x07c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_27 (ZCZ ball U5 ) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { + pinctrl-single,pins = <0x0e0 0x2F>; }; /* Mode 7, RxActive */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { + pinctrl-single,pins = <0x0e0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { + pinctrl-single,pins = <0x0e0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { + pinctrl-single,pins = <0x0e0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_27_hdmi_pin: pinmux_P8_27_hdmi_pin { + pinctrl-single,pins = <0x0e0 0x00>; }; /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_28 (ZCZ ball V5 ) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { + pinctrl-single,pins = <0x0e8 0x2F>; }; /* Mode 7, RxActive */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { + pinctrl-single,pins = <0x0e8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { + pinctrl-single,pins = <0x0e8 0x05>; }; /* Mode 5, Pull-Down */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { + pinctrl-single,pins = <0x0e8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_28_hdmi_pin: pinmux_P8_28_hdmi_pin { + pinctrl-single,pins = <0x0e8 0x00>; }; /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_29 (ZCZ ball R5 ) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { + pinctrl-single,pins = <0x0e4 0x2F>; }; /* Mode 7, RxActive */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { + pinctrl-single,pins = <0x0e4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { + pinctrl-single,pins = <0x0e4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { + pinctrl-single,pins = <0x0e4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_29_hdmi_pin: pinmux_P8_29_hdmi_pin { + pinctrl-single,pins = <0x0e4 0x00>; }; /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_30 (ZCZ ball R6 ) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { + pinctrl-single,pins = <0x0ec 0x2F>; }; /* Mode 7, RxActive */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { + pinctrl-single,pins = <0x0ec 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { + pinctrl-single,pins = <0x0ec 0x05>; }; /* Mode 5, Pull-Down*/ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { + pinctrl-single,pins = <0x0ec 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_30_hdmi_pin: pinmux_P8_30_hdmi_pin { + pinctrl-single,pins = <0x0ec 0x00>; }; /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_31 (ZCZ ball V4 ) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { + pinctrl-single,pins = <0x0d8 0x2F>; }; /* Mode 7, RxActive */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { + pinctrl-single,pins = <0x0d8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { + pinctrl-single,pins = <0x0d8 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_31_hdmi_pin: pinmux_P8_31_hdmi_pin { + pinctrl-single,pins = <0x0d8 0x08>; }; /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_32 (ZCZ ball T5 ) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { + pinctrl-single,pins = <0x0dc 0x2F>; }; /* Mode 7, RxActive */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { + pinctrl-single,pins = <0x0dc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_uart_pin: pinmux_P8_32_uart_pin { + pinctrl-single,pins = <0x0dc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_32_hdmi_pin: pinmux_P8_32_hdmi_pin { + pinctrl-single,pins = <0x0dc 0x08>; }; /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_33 (ZCZ ball V3 ) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { + pinctrl-single,pins = <0x0d4 0x2F>; }; /* Mode 7, RxActive */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { + pinctrl-single,pins = <0x0d4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_hdmi_pin: pinmux_P8_33_hdmi_pin { + pinctrl-single,pins = <0x0d4 0x08>; }; /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_34 (ZCZ ball U4 ) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { + pinctrl-single,pins = <0x0cc 0x2F>; }; /* Mode 7, RxActive */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { + pinctrl-single,pins = <0x0cc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { + pinctrl-single,pins = <0x0cc 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_34_hdmi_pin: pinmux_P8_34_hdmi_pin { + pinctrl-single,pins = <0x0cc 0x08>; }; /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_35 (ZCZ ball V2 ) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { + pinctrl-single,pins = <0x0d0 0x2F>; }; /* Mode 7, RxActive */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { + pinctrl-single,pins = <0x0d0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_hdmi_pin: pinmux_P8_35_hdmi_pin { + pinctrl-single,pins = <0x0d0 0x08>; }; /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_36 (ZCZ ball U3 ) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { + pinctrl-single,pins = <0x0c8 0x2F>; }; /* Mode 7, RxActive */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { + pinctrl-single,pins = <0x0c8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { + pinctrl-single,pins = <0x0c8 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_36_hdmi_pin: pinmux_P8_36_hdmi_pin { + pinctrl-single,pins = <0x0c8 0x08>; }; /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_37 (ZCZ ball U1 ) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { + pinctrl-single,pins = <0x0c0 0x2F>; }; /* Mode 7, RxActive */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { + pinctrl-single,pins = <0x0c0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { + pinctrl-single,pins = <0x0c0 0x04>; }; /* Mode 4, Pull-Down*/ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { + pinctrl-single,pins = <0x0c0 0x02>; }; /* Mode 2, Pull-Down*/ + P8_37_hdmi_pin: pinmux_P8_37_hdmi_pin { + pinctrl-single,pins = <0x0c0 0x08>; }; /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_38 (ZCZ ball U2 ) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { + pinctrl-single,pins = <0x0c4 0x2F>; }; /* Mode 7, RxActive */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { + pinctrl-single,pins = <0x0c4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { + pinctrl-single,pins = <0x0c4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { + pinctrl-single,pins = <0x0c4 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_38_hdmi_pin: pinmux_P8_38_hdmi_pin { + pinctrl-single,pins = <0x0c4 0x08>; }; /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_39 (ZCZ ball T3 ) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { + pinctrl-single,pins = <0x0b8 0x2F>; }; /* Mode 7, RxActive */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { + pinctrl-single,pins = <0x0b8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { + pinctrl-single,pins = <0x0b8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { + pinctrl-single,pins = <0x0b8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_39_hdmi_pin: pinmux_P8_39_hdmi_pin { + pinctrl-single,pins = <0x0b8 0x08>; }; /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_40 (ZCZ ball T4 ) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { + pinctrl-single,pins = <0x0bc 0x2F>; }; /* Mode 7, RxActive */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { + pinctrl-single,pins = <0x0bc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { + pinctrl-single,pins = <0x0bc 0x05>; }; /* Mode 5, Pull-Down*/ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { + pinctrl-single,pins = <0x0bc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_40_hdmi_pin: pinmux_P8_40_hdmi_pin { + pinctrl-single,pins = <0x0bc 0x08>; }; /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_41 (ZCZ ball T1 ) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { + pinctrl-single,pins = <0x0b0 0x2F>; }; /* Mode 7, RxActive */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { + pinctrl-single,pins = <0x0b0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { + pinctrl-single,pins = <0x0b0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { + pinctrl-single,pins = <0x0b0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_41_hdmi_pin: pinmux_P8_41_hdmi_pin { + pinctrl-single,pins = <0x0b0 0x08>; }; /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_42 (ZCZ ball T2 ) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { + pinctrl-single,pins = <0x0b4 0x2F>; }; /* Mode 7, RxActive */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { + pinctrl-single,pins = <0x0b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { + pinctrl-single,pins = <0x0b4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { + pinctrl-single,pins = <0x0b4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_42_hdmi_pin: pinmux_P8_42_hdmi_pin { + pinctrl-single,pins = <0x0b4 0x08>; }; /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_43 (ZCZ ball R3 ) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { + pinctrl-single,pins = <0x0a8 0x2F>; }; /* Mode 7, RxActive */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { + pinctrl-single,pins = <0x0a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { + pinctrl-single,pins = <0x0a8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { + pinctrl-single,pins = <0x0a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { + pinctrl-single,pins = <0x0a8 0x03>; }; /* Mode 3, Pull-Down */ + P8_43_hdmi_pin: pinmux_P8_43_hdmi_pin { + pinctrl-single,pins = <0x0a8 0x08>; }; /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_44 (ZCZ ball R4 ) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { + pinctrl-single,pins = <0x0ac 0x2F>; }; /* Mode 7, RxActive */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { + pinctrl-single,pins = <0x0ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { + pinctrl-single,pins = <0x0ac 0x05>; }; /* Mode 5, Pull-Down*/ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { + pinctrl-single,pins = <0x0ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { + pinctrl-single,pins = <0x0ac 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P8_44_hdmi_pin: pinmux_P8_44_hdmi_pin { + pinctrl-single,pins = <0x0ac 0x08>; }; /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_45 (ZCZ ball R1 ) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { + pinctrl-single,pins = <0x0a0 0x2F>; }; /* Mode 7, RxActive */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { + pinctrl-single,pins = <0x0a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { + pinctrl-single,pins = <0x0a0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { + pinctrl-single,pins = <0x0a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { + pinctrl-single,pins = <0x0a0 0x03>; }; /* Mode 3, Pull-Down*/ + P8_45_hdmi_pin: pinmux_P8_45_hdmi_pin { + pinctrl-single,pins = <0x0a0 0x08>; }; /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_46 (ZCZ ball R2 ) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { + pinctrl-single,pins = <0x0a4 0x2F>; }; /* Mode 7, RxActive */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { + pinctrl-single,pins = <0x0a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { + pinctrl-single,pins = <0x0a4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { + pinctrl-single,pins = <0x0a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { + pinctrl-single,pins = <0x0a4 0x03>; }; /* Mode 3, Pull-Down*/ + P8_46_hdmi_pin: pinmux_P8_46_hdmi_pin { + pinctrl-single,pins = <0x0a4 0x08>; }; /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + /* P9_02 GND */ + /* P9_03 3.3V */ + /* P9_04 3.3V */ + /* P9_05 VDD_5V */ + /* P9_06 VDD_5V */ + /* P9_07 SYS_5V */ + /* P9_08 SYS_5V */ + /* P9_09 PWR_BUT */ + /* P9_10 (ZCZ ball A10) RESETn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_12 (ZCZ ball U18) */ + P9_12_default_pin: pinmux_P9_12_default_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { + pinctrl-single,pins = <0x078 0x2F>; }; /* Mode 7, RxActive */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { + pinctrl-single,pins = <0x078 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P9_13 (ZCZ ball U17) */ + P9_13_default_pin: pinmux_P9_13_default_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { + pinctrl-single,pins = <0x074 0x2F>; }; /* Mode 7, RxActive */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { + pinctrl-single,pins = <0x074 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { + pinctrl-single,pins = <0x074 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_14 (ZCZ ball U14) */ + P9_14_default_pin: pinmux_P9_14_default_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { + pinctrl-single,pins = <0x048 0x2F>; }; /* Mode 7, RxActive */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { + pinctrl-single,pins = <0x048 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { + pinctrl-single,pins = <0x048 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_15 (ZCZ ball R13) */ + P9_15_default_pin: pinmux_P9_15_default_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { + pinctrl-single,pins = <0x040 0x2F>; }; /* Mode 7, RxActive */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { + pinctrl-single,pins = <0x040 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { + pinctrl-single,pins = <0x040 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_16 (ZCZ ball T14) */ + P9_16_default_pin: pinmux_P9_16_default_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { + pinctrl-single,pins = <0x04c 0x2F>; }; /* Mode 7, RxActive */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { + pinctrl-single,pins = <0x04c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { + pinctrl-single,pins = <0x04c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_17 (ZCZ ball A16) */ + P9_17_default_pin: pinmux_P9_17_default_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { + pinctrl-single,pins = <0x15c 0x2F>; }; /* Mode 7, RxActive */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { + pinctrl-single,pins = <0x15c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_17_spi_pin: pinmux_P9_17_spi_pin { + pinctrl-single,pins = <0x15c 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { + pinctrl-single,pins = <0x15c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { + pinctrl-single,pins = <0x15c 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_18 (ZCZ ball B16) */ + P9_18_default_pin: pinmux_P9_18_default_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { + pinctrl-single,pins = <0x158 0x2F>; }; /* Mode 7, RxActive */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { + pinctrl-single,pins = <0x158 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { + pinctrl-single,pins = <0x158 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { + pinctrl-single,pins = <0x158 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { + pinctrl-single,pins = <0x158 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_19 (ZCZ ball D17) */ + P9_19_default_pin: pinmux_P9_19_default_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { + pinctrl-single,pins = <0x17c 0x2F>; }; /* Mode 7, RxActive */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { + pinctrl-single,pins = <0x17c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_19_can_pin: pinmux_P9_19_can_pin { + pinctrl-single,pins = <0x17c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { + pinctrl-single,pins = <0x17c 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_20 (ZCZ ball D18) */ + P9_20_default_pin: pinmux_P9_20_default_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { + pinctrl-single,pins = <0x178 0x2F>; }; /* Mode 7, RxActive */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { + pinctrl-single,pins = <0x178 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_20_can_pin: pinmux_P9_20_can_pin { + pinctrl-single,pins = <0x178 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { + pinctrl-single,pins = <0x178 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_21 (ZCZ ball B17) */ + P9_21_default_pin: pinmux_P9_21_default_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { + pinctrl-single,pins = <0x154 0x2F>; }; /* Mode 7, RxActive */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { + pinctrl-single,pins = <0x154 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { + pinctrl-single,pins = <0x154 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { + pinctrl-single,pins = <0x154 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { + pinctrl-single,pins = <0x154 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { + pinctrl-single,pins = <0x154 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_22 (ZCZ ball A17) */ + P9_22_default_pin: pinmux_P9_22_default_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { + pinctrl-single,pins = <0x150 0x2F>; }; /* Mode 7, RxActive */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { + pinctrl-single,pins = <0x150 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_22_spi_pin: pinmux_P9_22_spi_pin { + pinctrl-single,pins = <0x150 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { + pinctrl-single,pins = <0x150 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { + pinctrl-single,pins = <0x150 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { + pinctrl-single,pins = <0x150 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_23 (ZCZ ball V14) */ + P9_23_default_pin: pinmux_P9_23_default_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { + pinctrl-single,pins = <0x044 0x2F>; }; /* Mode 7, RxActive */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { + pinctrl-single,pins = <0x044 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { + pinctrl-single,pins = <0x044 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_24 (ZCZ ball D15) */ + P9_24_default_pin: pinmux_P9_24_default_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { + pinctrl-single,pins = <0x184 0x2F>; }; /* Mode 7, RxActive */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { + pinctrl-single,pins = <0x184 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { + pinctrl-single,pins = <0x184 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_24_can_pin: pinmux_P9_24_can_pin { + pinctrl-single,pins = <0x184 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { + pinctrl-single,pins = <0x184 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { + pinctrl-single,pins = <0x184 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_25 (ZCZ ball A14) Audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { + pinctrl-single,pins = <0x1ac 0x2F>; }; /* Mode 7, RxActive */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { + pinctrl-single,pins = <0x1ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { + pinctrl-single,pins = <0x1ac 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { + pinctrl-single,pins = <0x1ac 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { + pinctrl-single,pins = <0x1ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_25_audio_pin: pinmux_P9_25_audio_pin { + pinctrl-single,pins = <0x1ac (PIN_INPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_ahclkx.mcasp0_ahclkx */ + + /* P9_26 (ZCZ ball D16) */ + P9_26_default_pin: pinmux_P9_26_default_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { + pinctrl-single,pins = <0x180 0x2F>; }; /* Mode 7, RxActive */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { + pinctrl-single,pins = <0x180 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { + pinctrl-single,pins = <0x180 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_26_can_pin: pinmux_P9_26_can_pin { + pinctrl-single,pins = <0x180 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { + pinctrl-single,pins = <0x180 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { + pinctrl-single,pins = <0x180 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_27 (ZCZ ball C13) */ + P9_27_default_pin: pinmux_P9_27_default_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { + pinctrl-single,pins = <0x1a4 0x2F>; }; /* Mode 7, RxActive */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { + pinctrl-single,pins = <0x1a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { + pinctrl-single,pins = <0x1a4 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { + pinctrl-single,pins = <0x1a4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { + pinctrl-single,pins = <0x1a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_28 (ZCZ ball C12) Audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { + pinctrl-single,pins = <0x19c 0x2F>; }; /* Mode 7, RxActive */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { + pinctrl-single,pins = <0x19c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { + pinctrl-single,pins = <0x19c 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_28_spi_pin: pinmux_P9_28_spi_pin { + pinctrl-single,pins = <0x19c 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { + pinctrl-single,pins = <0x19c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { + pinctrl-single,pins = <0x19c 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { + pinctrl-single,pins = <0x19c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_28_audio_pin: pinmux_P9_28_audio_pin { + pinctrl-single,pins = <0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)>; }; /* mcasp0_ahclkr.mcasp0_axr2 */ + + /* P9_29 (ZCZ ball B13) Audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { + pinctrl-single,pins = <0x194 0x2F>; }; /* Mode 7, RxActive */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { + pinctrl-single,pins = <0x194 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { + pinctrl-single,pins = <0x194 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { + pinctrl-single,pins = <0x194 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { + pinctrl-single,pins = <0x194 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { + pinctrl-single,pins = <0x194 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_29_audio_pin: pinmux_P9_29_audio_pin { + pinctrl-single,pins = <0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_fsx.mcasp0_fsx */ + + /* P9_30 (ZCZ ball D12) */ + P9_30_default_pin: pinmux_P9_30_default_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_gpio_pin: pinmux_P9_30_gpio_pin { + pinctrl-single,pins = <0x198 0x2F>; }; /* Mode 7, RxActive */ + P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { + pinctrl-single,pins = <0x198 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_pwm_pin: pinmux_P9_30_pwm_pin { + pinctrl-single,pins = <0x198 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_30_spi_pin: pinmux_P9_30_spi_pin { + pinctrl-single,pins = <0x198 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_30_pruout_pin: pinmux_P9_30_pruout_pin { + pinctrl-single,pins = <0x198 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_30_pruin_pin: pinmux_P9_30_pruin_pin { + pinctrl-single,pins = <0x198 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_31 (ZCZ ball A13) Audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { + pinctrl-single,pins = <0x190 0x2F>; }; /* Mode 7, RxActive */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { + pinctrl-single,pins = <0x190 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { + pinctrl-single,pins = <0x190 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_31_spi_pin: pinmux_P9_31_spi_pin { + pinctrl-single,pins = <0x190 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { + pinctrl-single,pins = <0x190 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { + pinctrl-single,pins = <0x190 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_31_audio_pin: pinmux_P9_31_audio_pin { + pinctrl-single,pins = <0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)>; }; /* mcasp0_aclkx.mcasp0_aclkx */ + + /* P9_32 VADC */ + /* P9_33 (ZCZ ball C8 ) AIN4 */ + /* P9_34 AGND */ + /* P9_35 (ZCZ ball A8 ) AIN6 */ + /* P9_36 (ZCZ ball B8 ) AIN5 */ + /* P9_37 (ZCZ ball B7 ) AIN2 */ + /* P9_38 (ZCZ ball A7 ) AIN3 */ + /* P9_39 (ZCZ ball B6 ) AIN0 */ + /* P9_40 (ZCZ ball C7 ) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_default_pin: pinmux_P9_41_default_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { + pinctrl-single,pins = <0x1b4 0x2F>; }; /* Mode 7, RxActive */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { + pinctrl-single,pins = <0x1b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { + pinctrl-single,pins = <0x1b4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { + pinctrl-single,pins = <0x1b4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_default_pin: pinmux_P9_91_default_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { + pinctrl-single,pins = <0x1a8 0x2F>; }; /* Mode 7, RxActive */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { + pinctrl-single,pins = <0x1a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { + pinctrl-single,pins = <0x1a8 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { + pinctrl-single,pins = <0x1a8 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { + pinctrl-single,pins = <0x1a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_42 (ZCZ ball C18) */ + P9_42_default_pin: pinmux_P9_42_default_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { + pinctrl-single,pins = <0x164 0x2F>; }; /* Mode 7, RxActive */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { + pinctrl-single,pins = <0x164 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { + pinctrl-single,pins = <0x164 0x20>; }; /* Mode 0, Pull-Down, RxActive */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { + pinctrl-single,pins = <0x164 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_42_spics_pin: pinmux_P9_42_spics_pin { + pinctrl-single,pins = <0x164 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P9_42_spiclk_pin: pinmux_P9_42_spiclk_pin { + pinctrl-single,pins = <0x164 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_default_pin: pinmux_P9_92_default_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { + pinctrl-single,pins = <0x1a0 0x2F>; }; /* Mode 7, RxActive */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { + pinctrl-single,pins = <0x1a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { + pinctrl-single,pins = <0x1a0 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { + pinctrl-single,pins = <0x1a0 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { + pinctrl-single,pins = <0x1a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_43 GND */ + /* P9_44 GND */ + /* P9_45 GND */ + /* P9_46 GND */ +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_timer_pin>; + }; + + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_timer_pin>; + }; + + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_timer_pin>; + }; + + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_timer_pin>; + }; + + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_pruout_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + }; + + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_pruout_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + }; + + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_pwm_pin>; + }; + + P8_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_14_default_pin>; + pinctrl-1 = <&P8_14_gpio_pin>; + pinctrl-2 = <&P8_14_gpio_pu_pin>; + pinctrl-3 = <&P8_14_gpio_pd_pin>; + pinctrl-4 = <&P8_14_pwm_pin>; + }; + + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_pruin_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + }; + + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_pruin_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + }; + + P8_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_17_default_pin>; + pinctrl-1 = <&P8_17_gpio_pin>; + pinctrl-2 = <&P8_17_gpio_pu_pin>; + pinctrl-3 = <&P8_17_gpio_pd_pin>; + pinctrl-4 = <&P8_17_pwm_pin>; + }; + + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + }; + + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_pwm_pin>; + }; + + P8_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_26_default_pin>; + pinctrl-1 = <&P8_26_gpio_pin>; + pinctrl-2 = <&P8_26_gpio_pu_pin>; + pinctrl-3 = <&P8_26_gpio_pd_pin>; + }; + + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_pruout_pin>; + pinctrl-5 = <&P8_27_pruin_pin>; + pinctrl-6 = <&P8_27_hdmi_pin>; + }; + + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_pruout_pin>; + pinctrl-5 = <&P8_28_pruin_pin>; + pinctrl-6 = <&P8_28_hdmi_pin>; + }; + + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_pruout_pin>; + pinctrl-5 = <&P8_29_pruin_pin>; + pinctrl-6 = <&P8_29_hdmi_pin>; + }; + + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_pruout_pin>; + pinctrl-5 = <&P8_30_pruin_pin>; + pinctrl-6 = <&P8_30_hdmi_pin>; + }; + + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart", "hdmi"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_uart_pin>; + pinctrl-5 = <&P8_31_hdmi_pin>; + }; + + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_hdmi_pin>; + }; + + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_hdmi_pin>; + }; + + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_pwm_pin>; + pinctrl-5 = <&P8_34_hdmi_pin>; + }; + + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_hdmi_pin>; + }; + + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_pwm_pin>; + pinctrl-5 = <&P8_36_hdmi_pin>; + }; + + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_uart_pin>; + pinctrl-5 = <&P8_37_pwm_pin>; + pinctrl-6 = <&P8_37_hdmi_pin>; + }; + + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_uart_pin>; + pinctrl-5 = <&P8_38_pwm_pin>; + pinctrl-6 = <&P8_38_hdmi_pin>; + }; + + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_pruout_pin>; + pinctrl-5 = <&P8_39_pruin_pin>; + pinctrl-6 = <&P8_39_hdmi_pin>; + }; + + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_pruout_pin>; + pinctrl-5 = <&P8_40_pruin_pin>; + pinctrl-6 = <&P8_40_hdmi_pin>; + }; + + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_pruout_pin>; + pinctrl-5 = <&P8_41_pruin_pin>; + pinctrl-6 = <&P8_41_hdmi_pin>; + }; + + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_pruout_pin>; + pinctrl-5 = <&P8_42_pruin_pin>; + pinctrl-6 = <&P8_42_hdmi_pin>; + }; + + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_pruout_pin>; + pinctrl-5 = <&P8_43_pruin_pin>; + pinctrl-6 = <&P8_43_pwm_pin>; + pinctrl-7 = <&P8_43_hdmi_pin>; + }; + + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_pruout_pin>; + pinctrl-5 = <&P8_44_pruin_pin>; + pinctrl-6 = <&P8_44_pwm_pin>; + pinctrl-7 = <&P8_44_hdmi_pin>; + }; + + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_pruout_pin>; + pinctrl-5 = <&P8_45_pruin_pin>; + pinctrl-6 = <&P8_45_pwm_pin>; + pinctrl-7 = <&P8_45_hdmi_pin>; + }; + + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_pruout_pin>; + pinctrl-5 = <&P8_46_pruin_pin>; + pinctrl-6 = <&P8_46_pwm_pin>; + pinctrl-7 = <&P8_46_hdmi_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_uart_pin>; + }; + + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + }; + + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_uart_pin>; + }; + + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_pwm_pin>; + }; + + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_pwm_pin>; + }; + + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_pwm_pin>; + }; + + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_spi_pin>; + pinctrl-5 = <&P9_17_i2c_pin>; + pinctrl-6 = <&P9_17_pwm_pin>; + }; + + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_spi_pin>; + pinctrl-5 = <&P9_18_i2c_pin>; + pinctrl-6 = <&P9_18_pwm_pin>; + }; + + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_can_pin>; + pinctrl-5 = <&P9_19_i2c_pin>; + }; + + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_can_pin>; + pinctrl-5 = <&P9_20_i2c_pin>; + }; + + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_spi_pin>; + pinctrl-5 = <&P9_21_uart_pin>; + pinctrl-6 = <&P9_21_i2c_pin>; + pinctrl-7 = <&P9_21_pwm_pin>; + }; + + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_spi_pin>; + pinctrl-5 = <&P9_22_uart_pin>; + pinctrl-6 = <&P9_22_i2c_pin>; + pinctrl-7 = <&P9_22_pwm_pin>; + }; + + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_pwm_pin>; + }; + + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_uart_pin>; + pinctrl-5 = <&P9_24_can_pin>; + pinctrl-6 = <&P9_24_i2c_pin>; + pinctrl-7 = <&P9_24_pruin_pin>; + }; + + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_qep_pin>; + pinctrl-5 = <&P9_25_pruout_pin>; + pinctrl-6 = <&P9_25_pruin_pin>; + pinctrl-7 = <&P9_25_audio_pin>; + }; + + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_uart_pin>; + pinctrl-5 = <&P9_26_can_pin>; + pinctrl-6 = <&P9_26_i2c_pin>; + pinctrl-7 = <&P9_26_pruin_pin>; + }; + + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_qep_pin>; + pinctrl-5 = <&P9_27_pruout_pin>; + pinctrl-6 = <&P9_27_pruin_pin>; + }; + + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pwm2", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_pwm_pin>; + pinctrl-5 = <&P9_28_spi_pin>; + pinctrl-6 = <&P9_28_pwm2_pin>; + pinctrl-7 = <&P9_28_pruout_pin>; + pinctrl-8 = <&P9_28_pruin_pin>; + pinctrl-9 = <&P9_28_audio_pin>; + }; + + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_pwm_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pruout_pin>; + pinctrl-7 = <&P9_29_pruin_pin>; + pinctrl-8 = <&P9_29_audio_pin>; + }; + + P9_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin"; + pinctrl-0 = <&P9_30_default_pin>; + pinctrl-1 = <&P9_30_gpio_pin>; + pinctrl-2 = <&P9_30_gpio_pu_pin>; + pinctrl-3 = <&P9_30_gpio_pd_pin>; + pinctrl-4 = <&P9_30_pwm_pin>; + pinctrl-5 = <&P9_30_spi_pin>; + pinctrl-6 = <&P9_30_pruout_pin>; + pinctrl-7 = <&P9_30_pruin_pin>; + }; + + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_pwm_pin>; + pinctrl-5 = <&P9_31_spi_pin>; + pinctrl-6 = <&P9_31_pruout_pin>; + pinctrl-7 = <&P9_31_pruin_pin>; + pinctrl-8 = <&P9_31_audio_pin>; + }; + + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_timer_pin>; + pinctrl-5 = <&P9_41_pruin_pin>; + }; + + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_qep_pin>; + pinctrl-5 = <&P9_91_pruout_pin>; + pinctrl-6 = <&P9_91_pruin_pin>; + }; + + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "uart", "spics", "spiclk"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_pwm_pin>; + pinctrl-5 = <&P9_42_uart_pin>; + pinctrl-6 = <&P9_42_spics_pin>; + pinctrl-7 = <&P9_42_spiclk_pin>; + }; + + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_qep_pin>; + pinctrl-5 = <&P9_92_pruout_pin>; + pinctrl-6 = <&P9_92_pruin_pin>; + }; + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + P8_14 { + gpio-name = "P8_14"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + P8_17 { + gpio-name = "P8_17"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_26 { + gpio-name = "P8_26"; + gpio = <&gpio1 29 0>; + input; + dir-changeable; + }; + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + P9_30 { + gpio-name = "P9_30"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 0cc150b..b34f3bb 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -25,14 +25,14 @@ compatible = "gpio-leds"; led@2 { - label = "beaglebone:green:heartbeat"; + label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { - label = "beaglebone:green:mmc0"; + label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -62,9 +62,6 @@ }; &am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - user_leds_s0: user_leds_s0 { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -95,15 +92,11 @@ >; }; - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ @@ -123,6 +116,8 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -308,6 +303,9 @@ */ ti,pmic-shutdown-controller; + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + regulators { dcdc1_reg: regulator@0 { regulator-name = "vdds_dpr"; @@ -359,15 +357,11 @@ phy-mode = "mii"; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; -}; - &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; status = "okay"; }; @@ -393,3 +387,32 @@ &sham { status = "okay"; }; + +&rtc { + system-power-controller; +}; + +/* the cape manager */ +/ { + bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cells = <&baseboard_data &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi new file mode 100644 index 0000000..7d8f673 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* standard */ + +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-jtag.dtsi b/arch/arm/boot/dts/am335x-bone-jtag.dtsi new file mode 100644 index 0000000..a92db8e --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-jtag.dtsi @@ -0,0 +1,20 @@ +/* + * Device Tree Source for bone jtag + * + * Copyright (C) 2015 Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi new file mode 100644 index 0000000..0961216 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "can"; + * }; + * P9_20_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.d_can0_tx */ + BONE_P9_20 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_19: uart1_rtsn.d_can0_rx */ + BONE_P9_19 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan0 { + pinctrl-0 = <&dcan0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi new file mode 100644 index 0000000..9e26413 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "can"; + * }; + * P9_26_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan1 { + pinctrl-0 = <&dcan1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi new file mode 100644 index 0000000..22cf462 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* lsblk */ + +#include +#include "am335x-peripheral-emmc.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_21_pinmux { + * state = "disabled"; + * }; + * P8_20_pinmux { + * state = "disabled"; + * }; + * P8_25_pinmux { + * state = "disabled"; + * }; + * P8_24_pinmux { + * state = "disabled"; + * }; + * P8_05_pinmux { + * state = "disabled"; + * }; + * P8_06_pinmux { + * state = "disabled"; + * }; + * P8_23_pinmux { + * state = "disabled"; + * }; + * P8_22_pinmux { + * state = "disabled"; + * }; + * P8_03_pinmux { + * state = "disabled"; + * }; + * P8_04_pinmux { + * state = "disabled"; + * }; + *}; + * + *&mmc2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + /* P8_21: gpmc_csn1.mmc1_clk */ + BONE_P8_21 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_20: gpmc_csn2.mmc1_cmd */ + BONE_P8_20 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_25: gpmc_ad0.mmc1_dat0 */ + BONE_P8_25 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_24: gpmc_ad1.mmc1_dat1 */ + BONE_P8_24 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_05: gpmc_ad2.mmc1_dat2 */ + BONE_P8_05 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_06: gpmc_ad3.mmc1_dat3 */ + BONE_P8_06 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_23: gpmc_ad4.mmc1_dat4 */ + BONE_P8_23 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_22: gpmc_ad5.mmc1_dat5 */ + BONE_P8_22 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_03: gpmc_ad6.mmc1_dat6 */ + BONE_P8_03 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_04: gpmc_ad7.mmc1_dat7 */ + BONE_P8_04 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&mmc2 { + pinctrl-0 = <&emmc_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi new file mode 100644 index 0000000..abf3b57 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-i2c2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "i2c"; + * }; + * P9_20_pinmux { + * mode = "i2c"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.i2c2_sda */ + BONE_P9_20 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + /* P9_19: uart1_rtsn.i2c2_scl */ + BONE_P9_19 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi new file mode 100644 index 0000000..5205fa0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi @@ -0,0 +1,120 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-peripheral-nxp-hdmi.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_off_pins: nxp_hdmi_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&i2c0 { + tda19988 { + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..65e5fbb --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + lcd_24bit_pins: pinmux_lcd_24bit_pins { + pinctrl-single,pins = < + + /* P8_45: lcd_data0.lcd_data0 */ + BONE_P8_45 (PIN_OUTPUT | MUX_MODE0) + /* P8_46: lcd_data1.lcd_data1 */ + BONE_P8_46 (PIN_OUTPUT | MUX_MODE0) + /* P8_43: lcd_data2.lcd_data2 */ + BONE_P8_43 (PIN_OUTPUT | MUX_MODE0) + /* P8_44: lcd_data3.lcd_data3 */ + BONE_P8_44 (PIN_OUTPUT | MUX_MODE0) + /* P8_41: lcd_data4.lcd_data4 */ + BONE_P8_41 (PIN_OUTPUT | MUX_MODE0) + /* P8_42: lcd_data5.lcd_data5 */ + BONE_P8_42 (PIN_OUTPUT | MUX_MODE0) + /* P8_39: lcd_data6.lcd_data6 */ + BONE_P8_39 (PIN_OUTPUT | MUX_MODE0) + /* P8_40: lcd_data7.lcd_data7 */ + BONE_P8_40 (PIN_OUTPUT | MUX_MODE0) + /* P8_37: lcd_data8.lcd_data8 */ + BONE_P8_37 (PIN_OUTPUT | MUX_MODE0) + /* P8_38: lcd_data9.lcd_data9 */ + BONE_P8_38 (PIN_OUTPUT | MUX_MODE0) + /* P8_36: lcd_data10.lcd_data10 */ + BONE_P8_36 (PIN_OUTPUT | MUX_MODE0) + /* P8_34: lcd_data11.lcd_data11 */ + BONE_P8_34 (PIN_OUTPUT | MUX_MODE0) + /* P8_35: lcd_data12.lcd_data12 */ + BONE_P8_35 (PIN_OUTPUT | MUX_MODE0) + /* P8_33: lcd_data13.lcd_data13 */ + BONE_P8_33 (PIN_OUTPUT | MUX_MODE0) + /* P8_31: lcd_data14.lcd_data14 */ + BONE_P8_31 (PIN_OUTPUT | MUX_MODE0) + /* P8_32: lcd_data15.lcd_data15 */ + BONE_P8_32 (PIN_OUTPUT | MUX_MODE0) + + /* gpmc_ad15.lcd_data16 */ + BONE_P8_15 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + BONE_P8_16 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + BONE_P8_11 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + BONE_P8_12 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + BONE_P8_17 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + BONE_P8_14 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + BONE_P8_13 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad8.lcd_data23 */ + BONE_P8_19 (PIN_OUTPUT | MUX_MODE1) + + /* P8_27: lcd_vsync.lcd_vsync */ + BONE_P8_27 (PIN_OUTPUT | MUX_MODE0) + /* P8_29: lcd_hsync.lcd_hsync */ + BONE_P8_29 (PIN_OUTPUT | MUX_MODE0) + /* P8_28: lcd_pclk.lcd_pclk*/ + BONE_P8_28 (PIN_OUTPUT | MUX_MODE0) + /* P8_30: lcd_ac_bias_en.lcd_ac_bias_en */ + BONE_P8_30 (PIN_OUTPUT | MUX_MODE0) + >; + }; +}; + +/ { + panel { + pinctrl-0 = <&lcd_24bit_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi new file mode 100644 index 0000000..354e66a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_17_pinmux { + * status = "disabled"; + * }; + * P9_18_pinmux { + * status = "disabled"; + * }; + * P9_21_pinmux { + * status = "disabled"; + * }; + * P9_22_pinmux { + * status = "disabled"; + * }; + *}; + * + *&spi0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + >; + }; +}; + +&spi0 { + pinctrl-0 = <&spi0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi new file mode 100644 index 0000000..bff7f8d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x190 0x33 /* mcasp0_aclkx.spi1_sclk, INPUT_PULLUP | MODE3 */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */ + // 0x164 0x12 /* eCAP0_in_PWM0_out.spi1_cs1 OUTPUT_PULLUP | MODE2 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi new file mode 100644 index 0000000..62874c8 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1a_pins: pinmux_spi1a_pins { + pinctrl-single,pins = < + 0x164 0x34 /* eCAP0_in_PWM0_out.spi1_sclk, INPUT_PULLUP | MODE4 */ + /* NOTE: P9.42 is connected to two pads */ + // 0x1A0 0x27 /* set the other pad to gpio input */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x178 0x14 /* uart1_ctsn.spi1_cs0, OUTPUT_PULLUP | MODE4 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1a_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi new file mode 100644 index 0000000..ae5b813 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS1 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "uart"; + * }; + * P9_26_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* P9_24: uart1_txd.uart1_txd */ + BONE_P9_24 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P9_26: uart1_rxd.uart1_rxd */ + BONE_P9_26 (PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi new file mode 100644 index 0000000..5fa593a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS2 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_21_pinmux { + * mode = "uart"; + * }; + * P9_22_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* P9_21: spi0_d0.uart2_txd */ + BONE_P9_21 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + /* P9_22: spi0_sclk.uart2_rxd */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi new file mode 100644 index 0000000..1d22a95 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS4 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS4.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_11_pinmux { + * mode = "uart"; + * }; + * P9_13_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart4 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; +}; + +&uart4 { + pinctrl-0 = <&uart4_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi new file mode 100644 index 0000000..01d0aec --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS5 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS5.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_37_pinmux { + * mode = "uart"; + * }; + * P8_38_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart5 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&uart5 { + pinctrl-0 = <&uart5_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 6b84937..b195b9e 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -9,6 +9,7 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" / { model = "TI AM335x BeagleBone"; diff --git b/arch/arm/boot/dts/am335x-boneblack-audio.dts b/arch/arm/boot/dts/am335x-boneblack-audio.dts new file mode 100644 index 0000000..1c5299c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-audio.dts @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts new file mode 100644 index 0000000..f5ec278 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +#include "am335x-cape-bbb-exp-c.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts new file mode 100644 index 0000000..27b3b72 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +#include "am335x-cape-bbb-exp-r.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts new file mode 100644 index 0000000..8e41afc --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Modified by Mirko Denecke + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" + +#include +#include + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + pru_pins: pinmux_pru_pins { + pinctrl-single,pins = < + 0x03c 0x35 /* ecap0_in_pwm0_out.pr1_ecap0_ecap_capin, MODE5 | INPUT_PULLUP | PRU, PPM-sum, SBUS, DSM */ + + 0x0e8 0x25 /* lcd_pclk.pr1_pru1_pru_r30_10, MODE5 | OUTPUT | PRU, CH_1 */ + 0x0e0 0x25 /* lcd_vsync.pr1_pru1_pru_r30_8, MODE5 | OUTPUT | PRU, CH_2 */ + 0x0ec 0x25 /* lcd_ac_bias_en.pr1_pru1_pru_r30_11, MODE5 | OUTPUT | PRU, CH_3 */ + 0x0e4 0x25 /* lcd_hsync.pr1_pru1_pru_r30_9, MODE5 | OUTPUT | PRU, CH_4 */ + 0x0bc 0x25 /* lcd_data7.pr1_pru1_pru_r30_7, MODE5 | OUTPUT | PRU, CH_5 */ + 0x0b8 0x25 /* lcd_data6.pr1_pru1_pru_r30_6, MODE5 | OUTPUT | PRU, CH_6 */ + 0x0b4 0x25 /* lcd_data5.pr1_pru1_pru_r30_5, MODE5 | OUTPUT | PRU, CH_7 */ + 0x0b0 0x25 /* lcd_data4.pr1_pru1_pru_r30_4, MODE5 | OUTPUT | PRU, CH_8 */ + 0x0ac 0x25 /* lcd_data3.pr1_pru1_pru_r30_3, MODE5 | OUTPUT | PRU, CH_9 */ + 0x0a8 0x25 /* lcd_data2.pr1_pru1_pru_r30_2, MODE5 | OUTPUT | PRU, CH_10 */ + 0x0a4 0x25 /* lcd_data1.pr1_pru1_pru_r30_1, MODE5 | OUTPUT | PRU, CH_11 */ + 0x0a0 0x25 /* lcd_data0.pr1_pru1_pru_r30_0, MODE5 | OUTPUT | PRU, CH_12 */ + + BONE_P8_12 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 TRIG */ + BONE_P8_16 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 ECHO */ + + BONE_P9_25 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* MPU9250 INT */ + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + /* P9_22: spi0_sclk.spi0_sclk */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_21: spi0_d0.spi0_d0 */ + BONE_P9_21 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_18: spi0_d1.spi0_d1 */ + BONE_P9_18 (PIN_OUTPUT_PULLUP | MUX_MODE0) + /* P9_17: spi0_cs0.spi0_cs0 */ + BONE_P9_17 (PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + /* P9_31: mcasp0_aclkx.spi1_sclk */ + BONE_P9_31 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_29: mcasp0_fsx.spi1_d0 */ + BONE_P9_29 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_30: mcasp0_axr0.spi1_d1 */ + BONE_P9_30 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_28: mcasp0_ahclkr.spi1_cs0 */ + BONE_P9_28 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_19: uart1_rtsn.spi1_cs1 */ +/* BONE_P9_19 (PIN_OUTPUT_PULLUP | MUX_MODE4)*/ + + /* P9_42: ecap0_in_pwm0_out.spi1_cs1 */ + BONE_P9_42A (PIN_OUTPUT_PULLUP | MUX_MODE2) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi0_0 { + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <24000000>; + reg = <0>; + compatible = "spidev"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi1_0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + }; + + spi1_1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + }; +}; + +&tscadc { + adc { + ti,adc-channels = <0 1>; + }; +}; + +&pruss { + pinctrl-names = "default"; + pinctrl-0 = <&pru_pins>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts new file mode 100644 index 0000000..6f16d4c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; + +#include "am335x-bone-argus.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts new file mode 100644 index 0000000..68ae67c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts new file mode 100644 index 0000000..6d419f7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts new file mode 100644 index 0000000..6d419f7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-overlay.dts new file mode 100644 index 0000000..d8051b6 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-overlay.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi new file mode 100644 index 0000000..94caa22 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <44>; /* Bank1, pin12 */ + dev_name = "/dev/ttyO4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + mmc2_pins_sleep: pinmux_mmc2_pins_sleep { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + uart4_pins_default: pinmux_uart4_pins_default { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT | MUX_MODE6) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + uart4_pins_sleep: pinmux_uart4_pins_sleep { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wpn.uart4_txd */ + >; + }; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc2_pins &wlan_pins>; + pinctrl-1 = <&mmc2_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart4_pins_default>; + pinctrl-1 = <&uart4_pins_sleep>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts new file mode 100644 index 0000000..ec953a9 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +#include "am335x-boneblack-wl1835mod-cape.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 55c0e95..11e4a16 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -8,7 +8,10 @@ /dts-v1/; #include "am33xx.dtsi" +#include "am33xx-es2.dtsi" #include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Black"; @@ -90,7 +93,3 @@ }; }; }; - -&rtc { - system-power-controller; -}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts new file mode 100644 index 0000000..c4bb320 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts new file mode 100644 index 0000000..44c872d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-wl1835.dtsi" + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&mmc3 { + status = "okay"; +}; + +&mac { + status = "disabled"; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi new file mode 100644 index 0000000..f26b22f --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi @@ -0,0 +1,125 @@ + +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + tibt { + compatible = "tibt"; + nshutdown_gpio = <60>; + dev_name = "/dev/ttyS3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x78 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN*/ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x8c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio2_1 gpmc_clk.mmc2_clk */ + 0x88 ( PIN_INPUT_PULLUP | MUX_MODE3) /* gpio2_0 gpmc_csn3.mmc2_cmd */ + 0x30 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_12 gpmc_ad12.mmc2_dat0 */ + 0x34 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_13 gpmc_ad13.mmc2_dat1 */ + 0x38 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_14 gpmc_ad14.mmc2_dat2 */ + 0x3c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_15 gpmc_ad15.mmc2_dat3 */ + >; + }; + + mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio2_1 gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio2_0 gpmc_csn3.mmc2_cmd */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_12 gpmc_ad12.mmc2_dat0 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_13 gpmc_ad13.mmc2_dat1 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_14 gpmc_ad14.mmc2_dat2 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_15 gpmc_ad15.mmc2_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/ + >; + }; + + uart3_pins_default: pinmux_uart3_pins_default { + pinctrl-single,pins = < + 0x134 ( PIN_INPUT_PULLUP | MUX_MODE1 ) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 ( PIN_OUTPUT_PULLDOWN | MUX_MODE1 ) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 ( PIN_INPUT | MUX_MODE3 ) /* (M17) mdio_data.uart3_ctsn */ + 0x14c ( PIN_OUTPUT_PULLDOWN | MUX_MODE3 ) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; + + uart3_pins_sleep: pinmux_uart3_pins_sleep { + pinctrl-single,pins = < + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (M17) mdio_data.uart3_ctsn */ + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc3_pins &wlan_pins>; + pinctrl-1 = <&mmc3_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart3 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart3_pins_default>; + pinctrl-1 = <&uart3_pins_sleep>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index dce3c86..ef2e6cd 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -8,7 +8,9 @@ /dts-v1/; #include "am33xx.dtsi" +#include "am33xx-es2.dtsi" #include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" / { model = "TI AM335x BeagleBone Green"; @@ -32,22 +34,3 @@ bus-width = <8>; status = "okay"; }; - -&am33xx_pinmux { - uart2_pins: uart2_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ - >; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&rtc { - system-power-controller; -}; diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi new file mode 100644 index 0000000..01f9cde --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + edt_ft5306_ts_pins: pinmux_edt_ft5306_ts_pins { + pinctrl-single,pins = < + /* CAP_TSC gpmc_a1.gpio1_17, INPUT | MODE7 */ + BONE_P9_23 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi new file mode 100644 index 0000000..539409c --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi new file mode 100644 index 0000000..bce6ac5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-olimex-som.dts b/arch/arm/boot/dts/am335x-olimex-som.dts new file mode 100644 index 0000000..2b00ad2 --- /dev/null +++ b/arch/arm/boot/dts/am335x-olimex-som.dts @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-som-common.dtsi" + +/ { + model = "Olimex AM335x SOM"; + compatible = "olimex,am335x-olimex-som", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&am33xx_pinmux { + lcd_pins_default: lcd_pins_default { + pinctrl-single,pins = < + 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ + 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ + 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ + 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ + 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ + 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ + 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ + 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ + 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ + 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ + 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ + 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ + 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ + 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ + 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ + 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ + 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ + 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ + 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ + 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ + 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ + 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ + 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ + 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + >; + }; + + lcd_pins_sleep: lcd_pins_sleep { + pinctrl-single,pins = < + 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data16 */ + 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data17 */ + 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data18 */ + 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data19 */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data20 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data21 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data22 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data23 */ + 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ + 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ + 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ + 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ + 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ + 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ + 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ + 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ + 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ + 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ + 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ + 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ + 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ + 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ + 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ + 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ + /* lcd_vsync.lcd_vsync,OUTPUT | MODE0 */ + 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ + /* lcd_ac_bias_en.lcd_ac_bias_en */ + 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + +}; + +&lcdc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default>; + pinctrl-1 = <&lcd_pins_sleep>; + status = "okay"; + /* display-timings { + 480x272 { + hactive = <480>; + vactive = <272>; + hback-porch = <43>; + hfront-porch = <8>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + };*/ + + display-timings { + native-mode = <&vga1024x768>; + lcd4: 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <40>; + vback-porch = <8>; + vfront-porch = <7>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + }; + lcd7: 800x480 { + clock-frequency = <33300000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <40>; + vback-porch = <23>; + vfront-porch = <20>; + hsync-len = <6>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + }; + lcd10: 1024x600 { + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <160>; + hback-porch = <140>; + vback-porch = <20>; + vfront-porch = <12>; + hsync-len = <20>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + }; + + vga800x600: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hfront-porch = <40>; + hback-porch = <88>; + vfront-porch = <1>; + vback-porch = <23>; + hsync-len = <128>; + vsync-len = <4>; + hsync-active = <0>; + vsync-active = <0>; + }; + vga1024x768: 1024x768 { + clock-frequency = <65000000>; + hactive = <1024>; + hfront-porch = <24>; + hback-porch = <160>; + hsync-len = <136>; + vactive = <768>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi new file mode 100644 index 0000000..4335e39 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi new file mode 100644 index 0000000..02b5bd1 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi new file mode 100644 index 0000000..603f34e --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + + bus-width = <8>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi new file mode 100644 index 0000000..ed9a0b5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&i2c2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi new file mode 100644 index 0000000..1dfd26a --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..74ddc12 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; +}; + +/ { + panel { + status = "okay"; + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <0>; + raster-order = <1>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 1024x600 { + clock-frequency = <36000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <1>; + hback-porch = <45>; + hsync-len = <30>; + vback-porch = <22>; + vfront-porch = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi new file mode 100644 index 0000000..969e352 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi new file mode 100644 index 0000000..f59fa4c --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi new file mode 100644 index 0000000..a25d6cf --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi new file mode 100644 index 0000000..adc89f0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart4 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi new file mode 100644 index 0000000..8b42fb0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart5 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts new file mode 100644 index 0000000..1212a53 --- /dev/null +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" +#include + +/ { + model = "SanCloud BeagleBone Enhanced"; + compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; + ti,vcc-aux-disable-is-sleep; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&usb_hub_ctrl>; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + usb_hub_ctrl: usb_hub_ctrl { + pinctrl-single,pins = < + 0x144 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + >; + }; + + mpu6050_pins: pinmux_mpu6050_pins { + pinctrl-single,pins = < + 0x168 (PIN_INPUT | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + >; + }; + + lps3331ap_pins: pinmux_lps3331ap_pins { + pinctrl-single,pins = < + 0x6C (PIN_INPUT | MUX_MODE7) /* conf_gpmc_a11.gpio1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + + lps331ap: lps331ap@5C { + compatible = "st,lps331ap"; + st,drdy-int-pin = <1>; + reg = <0x5C>; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + }; + + mpu6050: mpu6050@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + //orientation = <0xff 0 0 0 1 0 0 0 0xff>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-som-common.dtsi b/arch/arm/boot/dts/am335x-som-common.dtsi new file mode 100644 index 0000000..fb4399b --- /dev/null +++ b/arch/arm/boot/dts/am335x-som-common.dtsi @@ -0,0 +1,465 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_fixed>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + ocp { + uart0: serial@44e09000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; + }; + uart1: serial@48022000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + + }; + uart4: serial@481a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; + }; + + epwmss0: epwmss@48300000 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ecap0_pins_default>; + pinctrl-1 = <&ecap0_pins_sleep>; + }; + }; + + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + + i2c0: i2c@44e0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + + tps: tps@24 { + reg = <0x24>; + }; + }; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + dcdc2_fixed: fixedregulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */ + compatible = "regulator-fixed"; + regulator-name = "dcdc2_fixed"; + + regulator-min-microvolt = <1378000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "led1:green:heartbeat"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + label = "led2:red:heartbeat"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@3 { + label = "led3:yello:heartbeat"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@4 { + label = "bkl"; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 500000 1>; + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <50>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* xdma_event_intr0.gpio0_19 */ + 0x198 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_axr0.gpio3_20 */ + 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_axr1.gpio3_21 */ + 0x1a4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_fsr.gpio3[19], INPUT_PULLDOWN | MODE7 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x168 (PIN_INPUT_PULLUP | MUX_MODE1) + 0x16c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + + 0x040 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a0.gmii2_txen, OUTPUT_PULLDOWN | MODE1 */ + 0x044 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a1.gmii2_rxdv, INPUT_PULLDOWN | MODE1 */ + 0x048 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a2.gmii2_txd3, OUTPUT_PULLDOWN | MODE1 */ + 0x04c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a3.gmii2_txd2, OUTPUT_PULLDOWN | MODE1 */ + 0x050 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a4.gmii2_txd1, OUTPUT_PULLDOWN | MODE1 */ + 0x054 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a5.gmii2_txd0, OUTPUT_PULLDOWN | MODE1 */ + 0x058 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a6.gmii2_txclk, INPUT_PULLDOWN | MODE1 */ + 0x05c (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a7.gmii2_rxclk, INPUT_PULLDOWN | MODE1 */ + 0x060 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a8.gmii2_rxd3, INPUT_PULLDOWN | MODE1 */ + 0x064 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a9.gmii2_rxd2, INPUT_PULLDOWN | MODE1 */ + 0x068 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a10.gmii2_rxd1, INPUT_PULLDOWN | MODE1 */ + 0x06c (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a11.gmii2_rxd0, INPUT_PULLDOWN | MODE1 */ + 0x070 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_wait0.gmii2_crs, INPUT_PULLUP | MODE1 */ + 0x074 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_wpn.gmii2_rxer, INPUT_PULLUP | MODE1 */ + 0x078 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_ben1.gmii2_col, INPUT_PULLUP | MODE1 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x074 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x078 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0FC (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1A0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; + + ecap0_pins_default: backlight_pins { + pinctrl-single,pins = < + 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + >; + }; + + ecap0_pins_sleep: ecap0_pins_sleep { + pinctrl-single,pins = < + 0x164 (PULL_DISABLE | MUX_MODE7) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + >; + }; + dcan0_default: dcan0_default_pins { + pinctrl-single,pins = < + 0x178 0x0a /* uart1_ctsn.dcan0_tx_mux2, OUTPUT | MODE2 */ + 0x17c 0x2a /* uart1_rtsn.dcan0_rx_mux2, INPUT | MODE2 */ + >; + }; + }; + +&tps { + compatible = "ti,tps65217"; + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + slaves = <2>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; +}; + +&dcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_default>; + status = "okay"; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <0 1 2 3>; + }; +}; diff --git b/arch/arm/boot/dts/am33xx-es2.dtsi b/arch/arm/boot/dts/am33xx-es2.dtsi new file mode 100644 index 0000000..6e252d4 --- /dev/null +++ b/arch/arm/boot/dts/am33xx-es2.dtsi @@ -0,0 +1,34 @@ +/* + * Device Tree Source for AM33XX SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + cpus { + cpu@0 { + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 1000000 1325000 + 800000 1300000 + 600000 1112000 + 300000 969000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; +}; diff --git b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi new file mode 100644 index 0000000..88c8d04 --- /dev/null +++ b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for AM33xx Overlay EDMA fixes + * + * Copyright (C) 2015 Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&mcasp0 { + status = "okay"; +}; + +&mcasp1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index be095d4..1829185 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -90,7 +90,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -499,6 +499,17 @@ ti,timer-pwm; }; + pruss: pruss@4a300000 { + compatible = "ti,pruss-v2"; + ti,hwmods = "pruss"; + ti,deassert-hard-reset = "pruss", "pruss"; + reg = <0x4a300000 0x080000>; + ti,pintc-offset = <0x20000>; + interrupt-parent = <&intc>; + status = "disabled"; + interrupts = <20 21 22 23 24 25 26 27>; + }; + rtc: rtc@44e3e000 { compatible = "ti,am3352-rtc", "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; @@ -695,6 +706,15 @@ ti,hwmods = "ehrpwm0"; status = "disabled"; }; + + eqep0: eqep@0x48300180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48300180 0x80>; + interrupt-parent = <&intc>; + interrupts = <79>; + ti,hwmods = "eqep0"; + status = "disabled"; + }; }; epwmss1: epwmss@48302000 { @@ -725,6 +745,15 @@ ti,hwmods = "ehrpwm1"; status = "disabled"; }; + + eqep1: eqep@0x48302180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48302180 0x80>; + interrupt-parent = <&intc>; + interrupts = <88>; + ti,hwmods = "eqep1"; + status = "disabled"; + }; }; epwmss2: epwmss@48304000 { @@ -755,6 +784,15 @@ ti,hwmods = "ehrpwm2"; status = "disabled"; }; + + eqep2: eqep@0x48304180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48304180 0x80>; + interrupt-parent = <&intc>; + interrupts = <89>; + ti,hwmods = "eqep2"; + status = "disabled"; + }; }; mac: ethernet@4a100000 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index f82aa44..e5b34b8 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -298,6 +298,13 @@ reg = <0x40d00000 0x100>; }; + dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; diff --git b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts new file mode 100644 index 0000000..37721c1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sabresd-wl1835.dtsi" + +/ { + model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; + compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; +}; diff --git b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts new file mode 100644 index 0000000..d249240 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2015 Robert Nelson (robertcnelson@gmail.com) + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include + +/ { + model = "Digi ConnectCore-i.MX6 SBC Board"; + compatible = "digi,connectcore/q", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_reset: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usbh1_reset"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <17 0x8>; /* active-low GPIO0_17 */ + + regulators { + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-ccimx6sbc { + pinctrl_hog: hoggrp { + fsl,pins = < + /* da9063*/ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* need to force low for hub reset */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x10b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_reset>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + broken-cd; /* cd & wp, is not wired up on this board */ + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts new file mode 100644 index 0000000..d88d9e2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts @@ -0,0 +1,25 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sabresd-wl1835.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Smart Device Board"; + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi new file mode 100644 index 0000000..862dfbd --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi @@ -0,0 +1,646 @@ +/* Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include + +/ { + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_audio: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply"; + gpio = <&gpio4 10 0>; + enable-active-high; + }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; + + wlan_en_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO for this board – Bank4, pin7 */ + gpio = <&gpio4 7 0>; + enable-active-high; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + }; + + sound { + compatible = "fsl,imx6q-sabresd-wm8962", + "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + +/* red_led gpio gpio1_2 is used for bt_enable + red { + gpios = <&gpio1 2 0>; + default-state = "on"; + }; +*/ + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <2>; + dev_name = "/dev/ttymxc4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +/* +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 9 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; +*/ + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 0>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio6>; + interrupts = <7 2>; + wakeup-gpios = <&gpio6 7 0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-sabresd { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x13059 // reserve two pins wl8 gpio, this is pulled low at reset for WL_EN + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x13059 // this is for WL_IRQ which driver will configure as an input with a pull down + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x1b0b1 + MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 0>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { + compatible = "fsl,imx21-uart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + /* enable rts/cts usage on uart5 */ + fsl,uart-has-rtscts; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; +/* cd-gpios = <&gpio2 2 0>; */ + wp-gpios = <&gpio2 3 0>; + no-1-8-v; + vmmc-supply = <&wlan_en_reg>; + non-removable; /* non-removable is not a variable, the fact it is */ + /* listed is all that is used by driver */ + cap-power-off-card; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 1211da8..e8fc7d8 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -9,6 +9,8 @@ * */ +#include + / { chosen { stdout-path = &uart2; @@ -17,23 +19,6 @@ memory { reg = <0x10000000 0x40000000>; }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_h1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; - }; }; &fec { @@ -55,8 +40,57 @@ status = "okay"; }; +&i2c3 { // CSI camera (CN11) and LVDS 7 inches touch panel (CN13) + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + ov5640_mipi: ov5640_mipi@3c { + compatible = "ovti,ov5640_mipi"; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "csi_mclk"; + pwn-gpios = <&gpio6 4 GPIO_ACTIVE_LOW>; + rst-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; + csi_id = <0>; + mclk = <24000000>; + mclk_source = <0>; + }; +}; + &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + imx6q-udoo { + pinctrl_hog: hoggrp { + fsl,pins = < + // Internal GPIOs + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x80000000 // 5v enable + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 // Vtt enable + + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x80000000 // Debug UART (J18) + + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 // USB hub reset + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 // USB hub clock + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0xb0b1 // USB OTG select + + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 // SD card power + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 // SD card detect + + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0xb0b1 // SAM3X OTG vbus_en + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x80000000 // SAM3X usb host + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x30b1 // Arduino pinout pin 12 + + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 // LVDS panel on (CN13) + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 // LVDS backlight on (CN13) + + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x1f071 // CSI camera enable (CN11) + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x1f071 // CSI camera reset (CN11) + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x130b0 // CSI master clock (CN11) + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -85,6 +119,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 @@ -92,6 +133,13 @@ >; }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + pinctrl_usbh: usbhgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 @@ -118,12 +166,26 @@ status = "okay"; }; -&usbh1 { +&uart4 { // iMX6-Arduino internal serial port - ttymxc3 pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks 201>; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + hub: usb2415@01 { + compatible = "generic-onboard-device"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh>; + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <2>; + }; }; &usdhc3 { @@ -132,3 +194,11 @@ non-removable; status = "okay"; }; + +&mipi_csi { + status = "okay"; + ipu_id = <0>; + csi_id = <0>; + v_channel = <0>; + lanes = <2>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index ef7fa62..b5d0f58 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio3 13 0>; + bluetooth-wake = <&gpio3 14 0>; + bluetooth-host-wake = <&gpio3 15 0>; + + wifi-ref-on = <&gpio2 29 0>; + wifi-rst-n = <&gpio5 2 0>; + wifi-reg-on = <&gpio1 26 0>; + wifi-host-wake = <&gpio1 29 0>; + wifi-wake = <&gpio1 30 0>; + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; @@ -37,6 +55,5 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 8d893a7..b2097ef 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio5 21 0>; + bluetooth-wake = <&gpio5 30 0>; + bluetooth-host-wake = <&gpio5 20 0>; + + wifi-ref-on = <&gpio5 31 0>; /* Wifi Power Enable */ + wifi-rst-n = <&gpio6 0 0>; /* WIFI_ON reset */ + wifi-reg-on = <&gpio1 26 0>; /* WL_REG_ON */ + wifi-host-wake = <&gpio1 29 0>; /* WL_HOST_WAKE */ + wifi-wake = <&gpio1 30 0>; /* WL_WAKE */ + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; diff --git b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts new file mode 100644 index 0000000..e5853f3 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts @@ -0,0 +1,633 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sl.dtsi" + +/ { + model = "Freescale i.MX6 SoloLite EVK Board"; + compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_aud3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; + + wlan_en_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO for this board – Bank5, pin13 */ + gpio = <&gpio5 13 0>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <134>; // GPIO5_6 The wl8 driver expects gpio to be an integer, so gpio5_6 is (5-1)*32+6=134 + dev_name = "/dev/ttymxc3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 11 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6sl-evk { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 + MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 + MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x13059 // reserve two pins from sd1 for wl8 gpio, this is pulled low at reset for WL_EN + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x13059 // this is for wl_irq which driver will configure as an input with a pull down + >; + }; + + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 + MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 + MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 + MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 + MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 + MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 + >; + }; + + pinctrl_fec_sleep: fecgrp-sleep { + fsl,pins = < + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 + MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010 + MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0 + MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0 + MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0 + MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x13059 // used for HOST_HCI_RX + MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x13059 // used for HOST_HCI_TX + MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x13059 // used for HOST_HCI_RTS, note reversed to TI nomenclature + MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x13059 // used for HOST_HCI_CTS + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x13059 // used for BT_EN + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) /* ROW0, COL0 */ + MATRIX_KEY(0x0, 0x1, KEY_DOWN) /* ROW0, COL1 */ + MATRIX_KEY(0x0, 0x2, KEY_ENTER) /* ROW0, COL2 */ + MATRIX_KEY(0x1, 0x0, KEY_HOME) /* ROW1, COL0 */ + MATRIX_KEY(0x1, 0x1, KEY_RIGHT) /* ROW1, COL1 */ + MATRIX_KEY(0x1, 0x2, KEY_LEFT) /* ROW1, COL2 */ + MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */ + MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */ + >; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + compatible = "fsl,imx21-uart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; + + /* enable rts/cts usage on uart4 */ + fsl,uart-has-rtscts; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio5 0 0>; + wp-gpios = <&gpio4 29 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&wlan_en_reg>; + non-removable; // non-removable is not a variable, the fact it is listed is all that is used by driver + cap-power-off-card; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 01e1e2d..1f02dbd 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -205,6 +205,25 @@ >; }; + spi3_pins: pinmux_spi3_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT | MUX_MODE1) /* sdmmc2_clk.mcspi3_clk gpio_130 */ + 0x12a (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_cmd.mcspi3_simo gpio_131 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0.mcspi3_somi gpio_132 */ + 0x130 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat2.mcspi3_cs1 gpio_134 */ + 0x132 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat3.mcspi3_cs0 gpio_135 */ + >; + }; + + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT | MUX_MODE1) /* mcbsp1_clkr.mcspi4_clk gpio_156 */ + 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_dx.mcspi4_simo gpio_158 */ + 0x162 (PIN_INPUT_PULLUP | MUX_MODE1) /* mcbsp1_dr.mcspi4_somi gpio_159 */ + 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_fsx.mcspi4_cs0 gpio_161 */ + >; + }; + hsusb2_pins: pinmux_hsusb2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ @@ -310,6 +329,36 @@ status = "disabled"; }; +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <48000000>; + }; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + status = "okay"; + + spidev2: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; +}; + &twl_gpio { ti,use-leds; /* pullups: BIT(1) */ diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 8ba465d..2c33a10 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -271,9 +271,18 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; }; }; +&i2c2 { + clock-frequency = <400000>; +}; + #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 78d3631..67ee5b4 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -10,6 +10,18 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index df2e356..cf16679 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -460,16 +460,6 @@ }; }; -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - &mcbsp1 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; diff --git b/arch/arm/boot/dts/omap4-panda-es-b3.dts b/arch/arm/boot/dts/omap4-panda-es-b3.dts new file mode 100644 index 0000000..2f1dabc --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-es-b3.dts @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4460.dtsi" +#include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; +}; + +&omap4_pmx_core { + led_gpio_pins: gpio_led_pmx { + pinctrl-single,pins = < + 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + >; + }; +}; + +&led_wkgpio_pins { + pinctrl-single,pins = < + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; +}; + +&leds { + pinctrl-0 = < + &led_gpio_pins + &led_wkgpio_pins + >; + + heartbeat { + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + }; + mmc { + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&gpio1 { + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 119f8e6..5c54ccf 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -15,6 +15,18 @@ compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; }; +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES"; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index a0e28b2..3ee41ef 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -14,3 +14,15 @@ model = "TI OMAP4 PandaBoard"; compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index aae5132..45df556 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -501,11 +501,13 @@ &emif1 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &emif2 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &keypad { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2bd9c83..daa22ab 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -691,6 +691,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; emif2: emif@4d000000 { @@ -703,6 +704,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; ocp2scp@4a0ad000 { diff --git b/arch/arm/configs/rcn-ee_defconfig b/arch/arm/configs/rcn-ee_defconfig new file mode 100644 index 0000000..2bdb6a9 --- /dev/null +++ b/arch/arm/configs/rcn-ee_defconfig @@ -0,0 +1,2942 @@ +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_XZ=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_BLK_CGROUP=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_NAMESPACES=y +CONFIG_USER_NS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_BPF_SYSCALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_CC_STACKPROTECTOR_STRONG=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_BLK_DEV_THROTTLING=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_KARMA_PARTITION=y +CONFIG_CFQ_GROUP_IOSCHED=y +CONFIG_ARCH_MXC=y +CONFIG_SOC_IMX50=y +CONFIG_SOC_IMX51=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SX=y +CONFIG_SOC_IMX6UL=y +CONFIG_SOC_IMX7D=y +CONFIG_SOC_LS1021A=y +CONFIG_SOC_VF610=y +CONFIG_WAND_RFKILL=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_NOKIA_RX51 is not set +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_430973=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_REALLOC_ENABLE_AUTO=y +CONFIG_PCI_STUB=m +CONFIG_PCI_IMX6=y +CONFIG_PCI_TEGRA=y +CONFIG_PCIEAER_INJECT=m +CONFIG_SMP=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_HZ_250=y +CONFIG_KSM=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_ZSWAP=y +CONFIG_ZBUD=y +CONFIG_ZSMALLOC=m +CONFIG_SECCOMP=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_KEXEC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPUFREQ_DT=y +CONFIG_ARM_IMX6Q_CPUFREQ=y +# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set +CONFIG_QORIQ_CPUFREQ=y +CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_BINFMT_MISC=m +CONFIG_HIBERNATION=y +CONFIG_PM_AUTOSLEEP=y +CONFIG_PM_WAKELOCKS=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +CONFIG_APM_EMULATION=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_NET_IPVTI=m +CONFIG_NET_FOU_IP_TUNNELS=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +CONFIG_TCP_CONG_CDG=m +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETLABEL=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_GLUE_CT=y +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_INET=m +CONFIG_NF_TABLES_NETDEV=m +CONFIG_NFT_EXTHDR=m +CONFIG_NFT_META=m +CONFIG_NFT_CT=m +CONFIG_NFT_RBTREE=m +CONFIG_NFT_HASH=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_COMPAT=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_OVF=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_PE_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_DUP_IPV4=m +CONFIG_NF_TABLES_ARP=m +CONFIG_NF_LOG_ARP=m +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_NET_DCCPPROBE=m +CONFIG_NET_SCTPPROBE=m +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +CONFIG_TIPC=m +CONFIG_TIPC_MEDIA_IB=y +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +CONFIG_LLC2=m +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_PHONET=m +CONFIG_6LOWPAN=m +CONFIG_IEEE802154=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_MAC802154=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=m +CONFIG_NET_CLS_BPF=m +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_EMATCH_CANID=m +CONFIG_NET_EMATCH_IPSET=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +CONFIG_NET_ACT_CONNMARK=m +CONFIG_NET_CLS_IND=y +CONFIG_DCB=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y +CONFIG_OPENVSWITCH=m +CONFIG_NETLINK_MMAP=y +CONFIG_NETLINK_DIAG=m +CONFIG_NET_MPLS_GSO=y +CONFIG_MPLS_ROUTING=m +CONFIG_MPLS_IPTUNNEL=m +CONFIG_NET_L3_MASTER_DEV=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_BPF_JIT=y +CONFIG_NET_PKTGEN=m +CONFIG_NET_DROP_MONITOR=m +CONFIG_CAN=m +CONFIG_CAN_VCAN=m +CONFIG_CAN_SLCAN=m +CONFIG_CAN_SUN4I=m +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_ISA=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_PEAK_PCI=m +CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_CAN_MCP251X=m +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_GS_USB=m +CONFIG_CAN_KVASER_USB=m +CONFIG_CAN_PEAK_USB=m +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_SOFTING=m +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_6LOWPAN=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIUART_QCA=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +CONFIG_BT_WILINK=m +CONFIG_RXKAD=m +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_MAC80211_MESH=y +CONFIG_WIMAX=m +CONFIG_RFKILL_INPUT=y +CONFIG_NET_9P=m +CONFIG_NET_9P_VIRTIO=m +CONFIG_NET_9P_RDMA=m +CONFIG_NFC=m +CONFIG_NFC_DIGITAL=m +CONFIG_NFC_NCI=m +CONFIG_NFC_NCI_SPI=m +CONFIG_NFC_HCI=m +CONFIG_NFC_SHDLC=y +CONFIG_NFC_PN533=m +CONFIG_NFC_WILINK=m +CONFIG_NFC_SIM=m +CONFIG_NFC_PORT100=m +CONFIG_NFC_PN544_I2C=m +CONFIG_NFC_MICROREAD_I2C=m +CONFIG_LWTUNNEL=y +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_EXTRA_FIRMWARE="am335x-bone-scale-data.bin am335x-evm-scale-data.bin am43x-evm-scale-data.bin" +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=24 +CONFIG_OMAP_OCP2SCP=y +CONFIG_VEXPRESS_CONFIG=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=m +CONFIG_MTD_AR7_PARTS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +CONFIG_RFD_FTL=m +CONFIG_SSFDC=m +CONFIG_MTD_OOPS=m +CONFIG_MTD_SWAP=m +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_INTEL_VR_NOR=m +CONFIG_MTD_PLATRAM=m +CONFIG_MTD_DATAFLASH=m +CONFIG_MTD_M25P80=m +CONFIG_MTD_SST25L=m +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC_BCH=y +CONFIG_MTD_NAND_OMAP2=m +CONFIG_MTD_NAND_RICOH=m +CONFIG_MTD_NAND_CAFE=m +CONFIG_MTD_NAND_NANDSIM=m +CONFIG_MTD_NAND_GPMI_NAND=m +CONFIG_MTD_NAND_MXC=m +CONFIG_MTD_NAND_SUNXI=m +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_OMAP2=m +CONFIG_MTD_ONENAND_2X_PROGRAM=y +CONFIG_MTD_LPDDR=m +CONFIG_MTD_SPI_NOR=m +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_BLOCK=y +CONFIG_OF_CONFIGFS=y +CONFIG_BLK_DEV_NULL_BLK=m +CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m +CONFIG_ZRAM=m +CONFIG_ZRAM_LZ4_COMPRESS=y +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_DRBD=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=m +CONFIG_BLK_DEV_RBD=m +CONFIG_BLK_DEV_NVME=m +CONFIG_AD525X_DPOT=m +CONFIG_AD525X_DPOT_I2C=m +CONFIG_AD525X_DPOT_SPI=m +CONFIG_SGI_IOC4=m +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1780=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +CONFIG_HMC6352=m +CONFIG_DS1682=m +CONFIG_TI_DAC7512=m +CONFIG_BONE_CAPEMGR=y +CONFIG_TIEQEP=m +CONFIG_C2PORT=m +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93XX46=m +CONFIG_TI_ST=m +CONFIG_SENSORS_LIS3_SPI=m +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_CAPE_BONE_ARGUS=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_ISCSI_TCP=m +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2X_FCOE=m +CONFIG_BE2ISCSI=m +CONFIG_SCSI_HPSA=m +CONFIG_SCSI_3W_SAS=m +CONFIG_SCSI_ACARD=m +CONFIG_SCSI_MVSAS=m +# CONFIG_SCSI_MVSAS_DEBUG is not set +CONFIG_SCSI_MVUMI=m +CONFIG_SCSI_ADVANSYS=m +CONFIG_SCSI_ESAS2R=m +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_UFSHCD=m +CONFIG_SCSI_UFSHCD_PCI=m +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +CONFIG_FCOE=m +CONFIG_SCSI_SNIC=m +CONFIG_SCSI_DMX3191D=m +CONFIG_SCSI_STEX=m +CONFIG_SCSI_LPFC=m +CONFIG_SCSI_AM53C974=m +CONFIG_SCSI_WD719X=m +CONFIG_SCSI_PMCRAID=m +CONFIG_SCSI_PM8001=m +CONFIG_SCSI_BFA_FC=m +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_CHELSIO_FCOE=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_ATA=y +CONFIG_SATA_AHCI=m +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_IMX=y +CONFIG_AHCI_SUNXI=y +CONFIG_AHCI_TEGRA=y +CONFIG_AHCI_QORIQ=y +CONFIG_SATA_ACARD_AHCI=m +CONFIG_SATA_SIL24=m +CONFIG_PDC_ADMA=m +CONFIG_SATA_QSTOR=m +CONFIG_SATA_SX4=m +CONFIG_ATA_PIIX=m +CONFIG_SATA_MV=m +CONFIG_SATA_NV=m +CONFIG_SATA_PROMISE=m +CONFIG_SATA_SIL=m +CONFIG_SATA_SIS=m +CONFIG_SATA_SVW=m +CONFIG_SATA_ULI=m +CONFIG_SATA_VIA=m +CONFIG_SATA_VITESSE=m +CONFIG_PATA_ARTOP=m +CONFIG_PATA_ATP867X=m +CONFIG_PATA_CMD64X=m +CONFIG_PATA_IMX=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_IT821X=m +CONFIG_PATA_JMICRON=m +CONFIG_PATA_MARVELL=m +CONFIG_PATA_NINJA32=m +CONFIG_PATA_RDC=m +CONFIG_PATA_SCH=m +CONFIG_PATA_TOSHIBA=m +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +CONFIG_ATA_GENERIC=m +CONFIG_MD=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BCACHE=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +CONFIG_DM_LOG_WRITES=m +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +CONFIG_TCM_USER2=m +CONFIG_LOOPBACK_TARGET=m +CONFIG_TCM_FC=m +CONFIG_ISCSI_TARGET=m +CONFIG_SBP_TARGET=m +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +CONFIG_FUSION_SAS=m +CONFIG_FUSION_CTL=m +CONFIG_FIREWIRE=m +CONFIG_FIREWIRE_OHCI=m +CONFIG_FIREWIRE_SBP2=m +CONFIG_FIREWIRE_NET=m +CONFIG_FIREWIRE_NOSY=m +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_IPVLAN=m +CONFIG_VXLAN=m +CONFIG_GENEVE=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_NET_VRF=m +CONFIG_ATM_DUMMY=m +CONFIG_ATM_NICSTAR=m +CONFIG_ATM_NICSTAR_USE_SUNI=y +CONFIG_ATM_NICSTAR_USE_IDT77105=y +CONFIG_ATM_IA=m +CONFIG_ATM_FORE200E=m +CONFIG_ATM_SOLOS=m +CONFIG_TYPHOON=m +CONFIG_ADAPTEC_STARFIRE=m +CONFIG_ET131X=m +CONFIG_SUN4I_EMAC=y +CONFIG_ACENIC=m +CONFIG_PCNET32=m +# CONFIG_NET_VENDOR_ARC is not set +CONFIG_ATL2=m +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_ALX=m +CONFIG_TIGON3=m +CONFIG_BNX2X=m +CONFIG_BNX2X_VXLAN=y +CONFIG_BNXT=m +CONFIG_BNA=m +CONFIG_CHELSIO_T1=m +CONFIG_CHELSIO_T1_1G=y +CONFIG_CHELSIO_T4_DCB=y +CONFIG_CHELSIO_T4VF=m +CONFIG_ENIC=m +CONFIG_NET_TULIP=y +CONFIG_DE2104X=m +CONFIG_TULIP=m +CONFIG_TULIP_NAPI=y +CONFIG_TULIP_NAPI_HW_MITIGATION=y +CONFIG_WINBOND_840=m +CONFIG_DM9102=m +CONFIG_ULI526X=m +CONFIG_DL2K=m +CONFIG_SUNDANCE=m +CONFIG_S2IO=m +CONFIG_VXGE=m +CONFIG_E100=m +CONFIG_E1000=m +CONFIG_E1000E=m +CONFIG_IGB=m +CONFIG_IGBVF=m +CONFIG_IXGB=m +CONFIG_IXGBE=m +CONFIG_IXGBE_VXLAN=y +CONFIG_IXGBE_DCB=y +CONFIG_IXGBEVF=m +CONFIG_I40E=m +CONFIG_I40E_VXLAN=y +CONFIG_I40E_DCB=y +CONFIG_I40E_FCOE=y +CONFIG_I40EVF=m +CONFIG_JME=m +CONFIG_SKGE=m +CONFIG_SKGE_GENESIS=y +CONFIG_SKY2=m +CONFIG_MLX4_EN=m +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y +CONFIG_KS8851=m +CONFIG_KSZ884X_PCI=m +CONFIG_ENC28J60=m +CONFIG_ENCX24J600=m +CONFIG_MYRI10GE=m +CONFIG_FEALNX=m +CONFIG_NATSEMI=m +CONFIG_NS83820=m +CONFIG_NE2K_PCI=m +CONFIG_HAMACHI=m +CONFIG_YELLOWFIN=m +CONFIG_QLA3XXX=m +CONFIG_QLCNIC=m +CONFIG_QLCNIC_VXLAN=y +CONFIG_QLGE=m +CONFIG_NETXEN_NIC=m +CONFIG_QED=m +CONFIG_QEDE=m +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_TUNE_TWISTER=y +CONFIG_8139TOO_8129=y +CONFIG_R8169=m +CONFIG_R6040=m +CONFIG_SC92031=m +CONFIG_SIS190=m +CONFIG_SFC=m +CONFIG_SMC91X=m +CONFIG_EPIC100=m +CONFIG_SMC911X=m +CONFIG_SMSC911X=m +CONFIG_SMSC9420=m +CONFIG_STMMAC_ETH=y +CONFIG_CASSINI=m +CONFIG_NIU=m +CONFIG_TEHUTI=m +CONFIG_TI_DAVINCI_EMAC=y +CONFIG_TI_CPSW=y +CONFIG_TI_CPTS=y +CONFIG_TLAN=m +CONFIG_VIA_VELOCITY=m +CONFIG_FDDI=y +CONFIG_DEFXX=m +CONFIG_SKFP=m +CONFIG_AQUANTIA_PHY=m +CONFIG_AT803X_PHY=m +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_TERANETICS_PHY=m +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=m +CONFIG_BCM87XX_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=y +CONFIG_DP83848_PHY=y +CONFIG_DP83867_PHY=m +CONFIG_FIXED_PHY=m +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_NET_DRIVERS=m +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9700=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_USB_NET_CH9200=m +CONFIG_ADM8211=m +CONFIG_ATH5K=m +CONFIG_ATH9K=m +CONFIG_ATH9K_HTC=m +CONFIG_CARL9170=m +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m +CONFIG_ATH6KL_USB=m +CONFIG_AR5523=m +CONFIG_WIL6210=m +CONFIG_ATH10K=m +CONFIG_ATH10K_PCI=m +CONFIG_AT76C50X_USB=m +CONFIG_B43=m +CONFIG_B43_SDIO=y +CONFIG_B43LEGACY=m +CONFIG_BRCMSMAC=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_USB=y +CONFIG_BRCMFMAC_PCIE=y +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW2200_PROMISCUOUS=y +CONFIG_IPW2200_QOS=y +CONFIG_IWL4965=m +CONFIG_IWL3945=m +CONFIG_IWLWIFI=m +CONFIG_IWLDVM=m +CONFIG_IWLMVM=m +# CONFIG_IWLWIFI_DEVICE_TRACING is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_PCI=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_LIBERTAS_MESH=y +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m +CONFIG_MWL8K=m +CONFIG_MT7601U=m +CONFIG_RT2X00=m +CONFIG_RT2400PCI=m +CONFIG_RT2500PCI=m +CONFIG_RT61PCI=m +CONFIG_RT2800PCI=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RTL8180=m +CONFIG_RTL8187=m +CONFIG_RTL8192CE=m +CONFIG_RTL8192SE=m +CONFIG_RTL8192DE=m +CONFIG_RTL8723AE=m +CONFIG_RTL8723BE=m +CONFIG_RTL8188EE=m +CONFIG_RTL8192EE=m +CONFIG_RTL8821AE=m +CONFIG_RTL8192CU=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8XXXU=m +CONFIG_RSI_91X=m +# CONFIG_RSI_SDIO is not set +CONFIG_WL1251=m +CONFIG_WL1251_SPI=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_USB_ZD1201=m +CONFIG_ZD1211RW=m +CONFIG_MAC80211_HWSIM=m +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_WIMAX_I2400M_USB=m +CONFIG_IEEE802154_FAKELB=m +CONFIG_IEEE802154_AT86RF230=m +CONFIG_IEEE802154_MRF24J40=m +CONFIG_IEEE802154_CC2520=m +CONFIG_IEEE802154_ATUSB=m +CONFIG_INPUT_SPARSEKMAP=m +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=m +CONFIG_KEYBOARD_ADP5588=m +CONFIG_KEYBOARD_ADP5589=m +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_LKKBD=m +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_GPIO_POLLED=m +CONFIG_KEYBOARD_TCA6416=m +CONFIG_KEYBOARD_TCA8418=m +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_LM8333=m +CONFIG_KEYBOARD_MAX7359=m +CONFIG_KEYBOARD_MCS=m +CONFIG_KEYBOARD_MPR121=m +CONFIG_KEYBOARD_SNVS_PWRKEY=m +CONFIG_KEYBOARD_IMX=m +CONFIG_KEYBOARD_NEWTON=m +CONFIG_KEYBOARD_TEGRA=m +CONFIG_KEYBOARD_OPENCORES=m +CONFIG_KEYBOARD_SAMSUNG=m +CONFIG_KEYBOARD_STOWAWAY=m +CONFIG_KEYBOARD_SUNKBD=m +CONFIG_KEYBOARD_SUN4I_LRADC=m +CONFIG_KEYBOARD_OMAP4=m +CONFIG_KEYBOARD_TWL4030=m +CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_CAP11XX=m +CONFIG_KEYBOARD_BCM=m +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_VSXXXAA=m +CONFIG_MOUSE_GPIO=m +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +CONFIG_JOYSTICK_IFORCE_USB=y +CONFIG_JOYSTICK_IFORCE_232=y +CONFIG_JOYSTICK_WARRIOR=m +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_AS5011=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_SERIAL_WACOM4=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_AD7877=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_AD7879_I2C=m +CONFIG_TOUCHSCREEN_AD7879_SPI=m +CONFIG_TOUCHSCREEN_AR1021_I2C=m +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_AUO_PIXCIR=m +CONFIG_TOUCHSCREEN_BU21013=m +CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m +CONFIG_TOUCHSCREEN_CY8CTMG110=m +CONFIG_TOUCHSCREEN_CYTTSP_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP_I2C=m +CONFIG_TOUCHSCREEN_CYTTSP_SPI=m +CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m +CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m +CONFIG_TOUCHSCREEN_DA9052=m +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_HAMPSHIRE=m +CONFIG_TOUCHSCREEN_EETI=m +CONFIG_TOUCHSCREEN_EGALAX=m +CONFIG_TOUCHSCREEN_FT6236=m +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_GOODIX=m +CONFIG_TOUCHSCREEN_ILI210X=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELAN=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_WACOM_I2C=m +CONFIG_TOUCHSCREEN_MAX11801=m +CONFIG_TOUCHSCREEN_MCS5000=m +CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_IMX6UL_TSC=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m +CONFIG_TOUCHSCREEN_PIXCIR=m +CONFIG_TOUCHSCREEN_WDT87XX_I2C=m +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_MC13783=m +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_TSC_SERIO=m +CONFIG_TOUCHSCREEN_TSC2004=m +CONFIG_TOUCHSCREEN_TSC2005=m +CONFIG_TOUCHSCREEN_TSC2007=m +CONFIG_TOUCHSCREEN_ST1232=m +CONFIG_TOUCHSCREEN_SUN4I=m +CONFIG_TOUCHSCREEN_SUR40=m +CONFIG_TOUCHSCREEN_SX8654=m +CONFIG_TOUCHSCREEN_TPS6507X=m +CONFIG_TOUCHSCREEN_ZFORCE=m +CONFIG_TOUCHSCREEN_ROHM_BU21023=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AD714X=m +CONFIG_INPUT_BMA150=m +CONFIG_INPUT_E3X0_BUTTON=m +CONFIG_INPUT_MC13783_PWRBUTTON=m +CONFIG_INPUT_MMA8450=m +CONFIG_INPUT_MPU3050=m +CONFIG_INPUT_GP2A=m +CONFIG_INPUT_GPIO_TILT_POLLED=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_KXTJ9=m +CONFIG_INPUT_KXTJ9_POLLED_MODE=y +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_REGULATOR_HAPTIC=m +CONFIG_INPUT_TPS65218_PWRBUTTON=y +CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_TWL4030_VIBRA=y +CONFIG_INPUT_TWL6040_VIBRA=y +CONFIG_INPUT_UINPUT=y +CONFIG_INPUT_PALMAS_PWRBUTTON=y +CONFIG_INPUT_PCF8574=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +CONFIG_INPUT_DA9052_ONKEY=m +CONFIG_INPUT_DA9055_ONKEY=m +CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_IMS_PCU=m +CONFIG_INPUT_CMA3000=m +CONFIG_INPUT_CMA3000_I2C=m +CONFIG_INPUT_DRV260X_HAPTICS=m +CONFIG_INPUT_DRV2667_HAPTICS=m +CONFIG_SERIO_AMBAKMI=m +CONFIG_SERIO_ALTERA_PS2=m +CONFIG_SERIO_SUN4I_PS2=m +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_NOZOMI=m +CONFIG_N_GSM=m +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_OMAP=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_RP2=m +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_TCG_TPM=m +CONFIG_TCG_TIS_I2C_ATMEL=m +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=m +CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_MUX_PINCTRL=y +CONFIG_I2C_ISCH=m +CONFIG_I2C_GPIO=y +CONFIG_I2C_IMX=y +CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OCORES=m +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_RK3X=y +CONFIG_I2C_SIMTEC=m +CONFIG_I2C_SUN6I_P2WI=y +CONFIG_I2C_TEGRA=y +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_DLN2=m +CONFIG_I2C_ROBOTFUZZ_OSIF=m +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m +CONFIG_SPI=y +CONFIG_SPI_DLN2=m +CONFIG_SPI_GPIO=m +CONFIG_SPI_IMX=m +CONFIG_SPI_OMAP24XX=m +CONFIG_SPI_TI_QSPI=m +CONFIG_SPI_PL022=m +CONFIG_SPI_ROCKCHIP=m +CONFIG_SPI_SUN4I=m +CONFIG_SPI_SUN6I=m +CONFIG_SPI_TEGRA114=m +CONFIG_SPI_TEGRA20_SFLASH=m +CONFIG_SPI_TEGRA20_SLINK=m +CONFIG_SPI_SPIDEV=m +CONFIG_HSI=m +CONFIG_OMAP_SSI=m +CONFIG_NOKIA_MODEM=m +CONFIG_CMT_SPEECH=m +CONFIG_SSI_PROTOCOL=m +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_GPIO=m +CONFIG_PINCTRL_AS3722=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_TI_IODELAY=y +CONFIG_PINCTRL_PALMAS=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_SYSCON=y +CONFIG_GPIO_ADP5588=m +CONFIG_GPIO_ADNP=m +CONFIG_GPIO_MAX7300=m +CONFIG_GPIO_MAX732X=m +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_SX150X=y +CONFIG_GPIO_DA9052=y +CONFIG_GPIO_DA9055=y +CONFIG_GPIO_DLN2=m +CONFIG_GPIO_PALMAS=y +CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_TWL6040=y +CONFIG_GPIO_74X164=m +CONFIG_GPIO_MAX7301=m +CONFIG_GPIO_MC33880=m +CONFIG_GPIO_MCP23S08=m +CONFIG_GPIO_VIPERBOARD=m +CONFIG_W1=m +CONFIG_W1_MASTER_MATROX=m +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +CONFIG_W1_MASTER_MXC=m +CONFIG_W1_MASTER_DS1WM=m +CONFIG_W1_MASTER_GPIO=m +CONFIG_HDQ_MASTER_OMAP=m +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2408=m +CONFIG_W1_SLAVE_DS2413=m +CONFIG_W1_SLAVE_DS2406=m +CONFIG_W1_SLAVE_DS2423=m +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +CONFIG_W1_SLAVE_DS2433_CRC=y +CONFIG_W1_SLAVE_DS2760=m +CONFIG_W1_SLAVE_DS2780=m +CONFIG_W1_SLAVE_DS2781=m +CONFIG_W1_SLAVE_DS28E04=m +CONFIG_W1_SLAVE_BQ27000=m +CONFIG_GENERIC_ADC_BATTERY=m +CONFIG_BATTERY_BQ27XXX=m +CONFIG_BATTERY_DA9052=m +CONFIG_AXP288_FUEL_GAUGE=m +CONFIG_BATTERY_RX51=m +CONFIG_CHARGER_ISP1704=m +CONFIG_CHARGER_GPIO=m +CONFIG_CHARGER_BQ2415X=m +CONFIG_CHARGER_TPS65217=m +CONFIG_AXP20X_POWER=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_AS3722=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_IMX=y +CONFIG_POWER_RESET_RESTART=y +CONFIG_POWER_RESET_VEXPRESS=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y +CONFIG_POWER_AVS=y +CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_SENSORS_AD7314=m +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7310=m +CONFIG_SENSORS_ADT7410=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_DA9052_ADC=m +CONFIG_SENSORS_DA9055=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_MC13783_ADC=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_G762=m +CONFIG_SENSORS_GPIO_FAN=y +CONFIG_SENSORS_HIH6130=m +CONFIG_SENSORS_IIO_HWMON=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_POWR1220=m +CONFIG_SENSORS_LINEAGE=m +CONFIG_SENSORS_LTC2945=m +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4222=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LTC4260=m +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_MAX1111=m +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX197=m +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_MAX6697=m +CONFIG_SENSORS_MAX31790=m +CONFIG_SENSORS_MCP3021=m +CONFIG_SENSORS_ADCXX=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM70=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LM95234=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m +CONFIG_SENSORS_NCT6775=m +CONFIG_SENSORS_NCT7802=m +CONFIG_SENSORS_NCT7904=m +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +CONFIG_SENSORS_LTC2978_REGULATOR=y +CONFIG_SENSORS_MAX16064=m +CONFIG_SENSORS_MAX20751=m +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +CONFIG_SENSORS_TPS40422=m +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_PWM_FAN=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHTC1=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +CONFIG_SENSORS_EMC2103=m +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +CONFIG_SENSORS_SMM665=m +CONFIG_SENSORS_ADC128D818=m +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_ADS7871=m +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_INA209=m +CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_TMP103=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_TWL4030_MADC=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +CONFIG_THERMAL=y +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_BANG_BANG=y +CONFIG_CPU_THERMAL=y +CONFIG_CLOCK_THERMAL=y +CONFIG_DEVFREQ_THERMAL=y +CONFIG_IMX_THERMAL=y +CONFIG_ROCKCHIP_THERMAL=y +CONFIG_TEGRA_SOCTHERM=y +CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y +CONFIG_OMAP3_THERMAL=y +CONFIG_OMAP4_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_DA9052_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=m +CONFIG_DW_WATCHDOG=y +CONFIG_OMAP_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y +CONFIG_IMX2_WDT=y +CONFIG_TEGRA_WATCHDOG=y +CONFIG_MFD_AS3722=y +CONFIG_MFD_AXP20X=y +CONFIG_MFD_DA9052_SPI=y +CONFIG_MFD_DA9052_I2C=y +CONFIG_MFD_DA9055=y +CONFIG_MFD_DA9063=y +CONFIG_MFD_DLN2=y +CONFIG_MFD_MC13XXX_SPI=m +CONFIG_MFD_MC13XXX_I2C=m +CONFIG_MFD_VIPERBOARD=m +CONFIG_MFD_RTSX_PCI=m +CONFIG_MFD_RTSX_USB=m +CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_TI_AM335X_TSCADC=m +CONFIG_MFD_PALMAS=y +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65218=y +CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y +CONFIG_MFD_WL1273_CORE=m +CONFIG_REGULATOR_USERSPACE_CONSUMER=y +CONFIG_REGULATOR_ACT8865=m +CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_DA9052=y +CONFIG_REGULATOR_DA9063=y +CONFIG_REGULATOR_FAN53555=m +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MC13783=m +CONFIG_REGULATOR_MC13892=m +CONFIG_REGULATOR_MT6311=y +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_PBIAS=y +CONFIG_REGULATOR_PFUZE100=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_S2MPA01=m +CONFIG_REGULATOR_S2MPS11=m +CONFIG_REGULATOR_S5M8767=m +CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65218=y +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_VEXPRESS=m +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y +CONFIG_MEDIA_RC_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_DVB_DYNAMIC_MINORS=y +CONFIG_RC_MAP=m +CONFIG_LIRC=m +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +CONFIG_IR_SHARP_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m +CONFIG_IR_XMP_DECODER=m +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +CONFIG_IR_IMON=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_IGORPLUGUSB=m +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +CONFIG_RC_LOOPBACK=m +CONFIG_IR_GPIO_CIR=m +CONFIG_IR_SUNXI=m +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STK1135=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TOUPTEK=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +CONFIG_VIDEO_CPIA2=m +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_VIDEO_USBTV=m +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_STK1160_COMMON=m +CONFIG_VIDEO_STK1160_AC97=y +CONFIG_VIDEO_GO7007=m +CONFIG_VIDEO_GO7007_USB=m +CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_RC=y +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_DVB_USB=m +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +CONFIG_DVB_USB_DVBSKY=m +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +CONFIG_DVB_AS102=m +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_V4L2=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_USB_AIRSPY=m +CONFIG_USB_HACKRF=m +CONFIG_USB_MSI2500=m +CONFIG_MEDIA_PCI_SUPPORT=y +CONFIG_VIDEO_SOLO6X10=m +CONFIG_VIDEO_TW68=m +CONFIG_VIDEO_IVTV=m +CONFIG_VIDEO_IVTV_ALSA=m +CONFIG_VIDEO_FB_IVTV=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_DT3155=m +CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_CX18_ALSA=m +CONFIG_VIDEO_CX23885=m +CONFIG_MEDIA_ALTERA_CI=m +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_CX88_ALSA=m +CONFIG_VIDEO_CX88_BLACKBIRD=m +CONFIG_VIDEO_CX88_DVB=m +CONFIG_VIDEO_BT848=m +CONFIG_DVB_BT8XX=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_SAA7134_ALSA=m +CONFIG_VIDEO_SAA7134_DVB=m +CONFIG_VIDEO_SAA7164=m +CONFIG_DVB_AV7110=m +CONFIG_DVB_BUDGET_CORE=m +CONFIG_DVB_BUDGET=m +CONFIG_DVB_BUDGET_CI=m +CONFIG_DVB_BUDGET_AV=m +CONFIG_DVB_BUDGET_PATCH=m +CONFIG_DVB_B2C2_FLEXCOP_PCI=m +CONFIG_DVB_PLUTO2=m +CONFIG_DVB_DM1105=m +CONFIG_DVB_PT1=m +CONFIG_DVB_PT3=m +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m +CONFIG_DVB_NGENE=m +CONFIG_DVB_DDBRIDGE=m +CONFIG_DVB_SMIPCIE=m +CONFIG_DVB_NETUP_UNIDVB=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_CAFE_CCIC=m +CONFIG_VIDEO_OMAP3=m +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_AM437X_VPFE=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y +CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m +CONFIG_VIDEO_TI_VPE=m +CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m +CONFIG_DVB_PLATFORM_DRIVERS=y +CONFIG_DVB_C8SECTPFE=m +CONFIG_SMS_SDIO_DRV=m +CONFIG_RADIO_SI470X=y +CONFIG_USB_SI470X=m +CONFIG_RADIO_SI4713=m +CONFIG_I2C_SI4713=m +CONFIG_USB_MR800=m +CONFIG_RADIO_SHARK=m +CONFIG_RADIO_SHARK2=m +CONFIG_USB_KEENE=m +CONFIG_USB_RAREMONO=m +CONFIG_USB_MA901=m +CONFIG_RADIO_WL128X=m +CONFIG_DVB_FIREDTV=m +CONFIG_SOC_CAMERA_IMX074=m +CONFIG_SOC_CAMERA_MT9M001=m +CONFIG_SOC_CAMERA_MT9M111=m +CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9T112=m +CONFIG_SOC_CAMERA_MT9V022=m +CONFIG_SOC_CAMERA_OV2640=m +CONFIG_SOC_CAMERA_OV5642=m +CONFIG_SOC_CAMERA_OV6650=m +CONFIG_SOC_CAMERA_OV772X=m +CONFIG_SOC_CAMERA_OV9640=m +CONFIG_SOC_CAMERA_OV9740=m +CONFIG_SOC_CAMERA_RJ54N1=m +CONFIG_SOC_CAMERA_TW9910=m +CONFIG_IMX_IPUV3_CORE=y +CONFIG_DRM=y +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_VIA=m +CONFIG_DRM_SAVAGE=m +CONFIG_DRM_VGEM=m +CONFIG_DRM_ROCKCHIP=m +CONFIG_ROCKCHIP_DW_HDMI=m +CONFIG_DRM_UDL=m +CONFIG_DRM_CIRRUS_QEMU=m +CONFIG_DRM_OMAP=y +CONFIG_OMAP5_DSS_HDMI=y +CONFIG_OMAP2_DSS_SDI=y +CONFIG_DISPLAY_ENCODER_OPA362=y +CONFIG_DISPLAY_ENCODER_TFP410=y +CONFIG_DISPLAY_ENCODER_TPD12S015=y +CONFIG_DISPLAY_CONNECTOR_DVI=y +CONFIG_DISPLAY_CONNECTOR_HDMI=y +CONFIG_DISPLAY_PANEL_DPI=y +CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m +CONFIG_DRM_TILCDC=y +CONFIG_DRM_QXL=m +CONFIG_DRM_BOCHS=m +CONFIG_DRM_VIRTIO_GPU=m +CONFIG_DRM_TEGRA=m +CONFIG_DRM_DW_HDMI_AHB_AUDIO=m +CONFIG_DRM_IMX=y +CONFIG_DRM_IMX_PARALLEL_DISPLAY=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_LDB=y +CONFIG_DRM_IMX_HDMI=y +CONFIG_DRM_ETNAVIV=m +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_ARMCLCD=y +CONFIG_FB_S3=m +CONFIG_FB_3DFX=m +CONFIG_FB_VT8623=m +CONFIG_FB_ARK=m +CONFIG_FB_PM3=m +CONFIG_FB_SMSCUFX=m +CONFIG_FB_UDL=m +CONFIG_FB_MB862XX=m +# CONFIG_FB_MX3 is not set +CONFIG_FB_SIMPLE=y +CONFIG_FB_SSD1307=y +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_GPIO=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SND=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_HRTIMER=m +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_ALOOP=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AD1889=m +CONFIG_SND_OXYGEN=m +CONFIG_SND_CTXFI=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +CONFIG_SND_HDSPM=m +CONFIG_SND_LOLA=m +CONFIG_SND_PCXHR=m +CONFIG_SND_RIPTIDE=m +CONFIG_SND_VIRTUOSO=m +CONFIG_SND_HDA_TEGRA=m +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_INPUT_BEEP=y +CONFIG_SND_HDA_PATCH_LOADER=y +CONFIG_SND_HDA_CODEC_REALTEK=m +CONFIG_SND_HDA_CODEC_ANALOG=m +CONFIG_SND_HDA_CODEC_SIGMATEL=m +CONFIG_SND_HDA_CODEC_VIA=m +CONFIG_SND_HDA_CODEC_HDMI=m +CONFIG_SND_HDA_CODEC_CIRRUS=m +CONFIG_SND_HDA_CODEC_CONEXANT=m +CONFIG_SND_HDA_CODEC_CA0110=m +CONFIG_SND_HDA_CODEC_CA0132=m +CONFIG_SND_HDA_CODEC_CA0132_DSP=y +CONFIG_SND_HDA_CODEC_CMEDIA=m +CONFIG_SND_HDA_CODEC_SI3054=m +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m +CONFIG_SND_DICE=m +CONFIG_SND_OXFW=m +CONFIG_SND_ISIGHT=m +CONFIG_SND_FIREWORKS=m +CONFIG_SND_BEBOB=m +CONFIG_SND_FIREWIRE_DIGI00X=m +CONFIG_SND_FIREWIRE_TASCAM=m +CONFIG_SND_SOC=m +CONFIG_SND_EDMA_SOC=m +CONFIG_SND_AM33XX_SOC_EVM=m +CONFIG_SND_IMX_SOC=m +CONFIG_SND_SOC_EUKREA_TLV320=m +CONFIG_SND_SOC_IMX_SGTL5000=m +CONFIG_SND_SOC_IMX_SPDIF=m +CONFIG_SND_SOC_IMX_MC13783=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m +CONFIG_SND_OMAP_SOC_RX51=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +CONFIG_SND_SOC_ROCKCHIP=m +CONFIG_SND_SOC_ROCKCHIP_SPDIF=m +CONFIG_SND_SOC_ROCKCHIP_MAX98090=m +CONFIG_SND_SOC_ROCKCHIP_RT5645=m +CONFIG_SND_SUN4I_CODEC=m +CONFIG_SND_SOC_TEGRA=m +CONFIG_SND_SOC_TLV320AIC31XX=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=y +CONFIG_HID_A4TECH=m +CONFIG_HID_ACRUX=m +CONFIG_HID_ACRUX_FF=y +CONFIG_HID_APPLE=m +CONFIG_HID_APPLEIR=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CORSAIR=m +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CP2112=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GEMBIRD=m +CONFIG_HID_GFRM=m +CONFIG_HID_HOLTEK=m +CONFIG_HOLTEK_FF=y +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LCPOWER=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=y +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=m +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_CUSTOM_SENSOR=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_OTG=y +CONFIG_USB_MON=m +CONFIG_USB_WUSB_CBAF=m +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=m +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_U132_HCD=m +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m +CONFIG_USB_PRINTER=m +CONFIG_USB_TMC=m +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USBIP_CORE=m +CONFIG_USBIP_VHCI_HCD=m +CONFIG_USBIP_HOST=m +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_TUSB6010=y +CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_MUSB_AM35X=y +CONFIG_USB_MUSB_DSPS=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_OMAP=m +# CONFIG_USB_DWC3_PCI is not set +CONFIG_USB_DWC2=m +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_F81232=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_METRO=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +CONFIG_USB_SERIAL_WISHBONE=m +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_DEBUG=m +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +CONFIG_USB_HSIC_USB3503=m +CONFIG_USB_CHAOSKEY=m +CONFIG_USB_ONBOARD_DEVICE=y +CONFIG_AM335X_PHY_USB=y +CONFIG_TWL6030_USB=y +CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_MXS_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_NET2280=m +CONFIG_USB_ETH=y +CONFIG_USB_LED_TRIG=y +CONFIG_UWB=m +CONFIG_UWB_I1480U=m +CONFIG_MMC=y +CONFIG_SDIO_UART=m +CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_TIFM_SD=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +CONFIG_MMC_DW=y +CONFIG_MMC_DW_EXYNOS=m +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +CONFIG_MMC_REALTEK_PCI=m +CONFIG_MMC_REALTEK_USB=m +CONFIG_MMC_SUNXI=y +CONFIG_MMC_TOSHIBA_PCI=m +CONFIG_MEMSTICK=m +CONFIG_MSPRO_BLOCK=m +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_MEMSTICK_REALTEK_PCI=m +CONFIG_MEMSTICK_REALTEK_USB=m +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3530=m +CONFIG_LEDS_LM3642=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_PCA9532_GPIO=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_LP5562=m +CONFIG_LEDS_LP8501=m +CONFIG_LEDS_LP8860=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_PCA963X=m +CONFIG_LEDS_DA9052=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_REGULATOR=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_LT3593=m +CONFIG_LEDS_MC13783=m +CONFIG_LEDS_TCA6507=m +CONFIG_LEDS_TLC591XX=m +CONFIG_LEDS_LM355x=m +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_CXGB3=m +CONFIG_INFINIBAND_CXGB4=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m +CONFIG_INFINIBAND_NES=m +CONFIG_INFINIBAND_OCRDMA=m +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_SRPT=m +CONFIG_INFINIBAND_ISER=m +CONFIG_INFINIBAND_ISERT=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1374_WDT=y +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_HYM8563=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_ISL12057=y +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PALMAS=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_PCF8523=y +CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_PCF85063=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_TPS65910=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_RV8803=m +CONFIG_RTC_DRV_S5M=y +CONFIG_RTC_DRV_M41T93=m +CONFIG_RTC_DRV_M41T94=m +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1343=m +CONFIG_RTC_DRV_DS1347=m +CONFIG_RTC_DRV_DS1390=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_DS3234=m +CONFIG_RTC_DRV_PCF2123=m +CONFIG_RTC_DRV_RX4581=m +CONFIG_RTC_DRV_MCP795=m +CONFIG_RTC_DRV_CMOS=m +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1685_FAMILY=m +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_DA9052=y +CONFIG_RTC_DRV_DA9055=m +CONFIG_RTC_DRV_DA9063=m +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m +CONFIG_RTC_DRV_IMXDI=y +CONFIG_RTC_DRV_OMAP=y +CONFIG_RTC_DRV_PL030=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +CONFIG_RTC_DRV_SUNXI=y +CONFIG_RTC_DRV_MC13XXX=m +CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_MXC=y +CONFIG_RTC_DRV_SNVS=y +CONFIG_RTC_DRV_HID_SENSOR_TIME=m +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_AXI_DMAC=y +CONFIG_DMA_OMAP=y +CONFIG_DMA_SUN6I=y +CONFIG_FSL_EDMA=y +CONFIG_IMX_DMA=y +CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y +CONFIG_PL330_DMA=y +CONFIG_TEGRA20_APB_DMA=y +CONFIG_TI_CPPI41=y +CONFIG_TI_EDMA=y +CONFIG_DW_DMAC=y +CONFIG_ASYNC_TX_DMA=y +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_DMEM_GENIRQ=m +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +CONFIG_UIO_NETX=m +CONFIG_UIO_PRUSS=m +CONFIG_UIO_MF624=m +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO_PCI=m +CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_INPUT=m +CONFIG_VIRTIO_MMIO=m +CONFIG_STAGING=y +CONFIG_RTLLIB=m +CONFIG_R8712U=m +CONFIG_R8188EU=m +CONFIG_ADIS16201=m +CONFIG_ADIS16203=m +CONFIG_ADIS16204=m +CONFIG_ADIS16209=m +CONFIG_ADIS16220=m +CONFIG_ADIS16240=m +CONFIG_LIS3L02DQ=m +CONFIG_SCA3000=m +CONFIG_AD7606=m +CONFIG_AD7606_IFACE_SPI=m +CONFIG_AD7780=m +CONFIG_AD7816=m +CONFIG_AD7192=m +CONFIG_AD7280=m +CONFIG_ADT7316=m +CONFIG_ADT7316_I2C=m +CONFIG_AD7150=m +CONFIG_AD7152=m +CONFIG_AD7746=m +CONFIG_AD9832=m +CONFIG_AD9834=m +CONFIG_ADIS16060=m +CONFIG_AD5933=m +CONFIG_SENSORS_ISL29018=m +CONFIG_SENSORS_ISL29028=m +CONFIG_TSL2583=m +CONFIG_TSL2x7x=m +CONFIG_ADE7753=m +CONFIG_ADE7754=m +CONFIG_ADE7758=m +CONFIG_ADE7759=m +CONFIG_ADE7854=m +CONFIG_AD2S90=m +CONFIG_AD2S1200=m +CONFIG_AD2S1210=m +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +CONFIG_ASHMEM=y +CONFIG_ANDROID_TIMED_GPIO=m +CONFIG_SYNC=y +CONFIG_ION=y +CONFIG_FB_TFT=m +CONFIG_FB_TFT_AGM1264K_FL=m +CONFIG_FB_TFT_BD663474=m +CONFIG_FB_TFT_HX8340BN=m +CONFIG_FB_TFT_HX8347D=m +CONFIG_FB_TFT_HX8353D=m +CONFIG_FB_TFT_HX8357D=m +CONFIG_FB_TFT_ILI9163=m +CONFIG_FB_TFT_ILI9320=m +CONFIG_FB_TFT_ILI9325=m +CONFIG_FB_TFT_ILI9340=m +CONFIG_FB_TFT_ILI9341=m +CONFIG_FB_TFT_ILI9481=m +CONFIG_FB_TFT_ILI9486=m +CONFIG_FB_TFT_PCD8544=m +CONFIG_FB_TFT_RA8875=m +CONFIG_FB_TFT_S6D02A1=m +CONFIG_FB_TFT_S6D1121=m +CONFIG_FB_TFT_SSD1289=m +CONFIG_FB_TFT_SSD1306=m +CONFIG_FB_TFT_SSD1331=m +CONFIG_FB_TFT_SSD1351=m +CONFIG_FB_TFT_ST7735R=m +CONFIG_FB_TFT_ST7789V=m +CONFIG_FB_TFT_TINYLCD=m +CONFIG_FB_TFT_TLS8204=m +CONFIG_FB_TFT_UC1611=m +CONFIG_FB_TFT_UC1701=m +CONFIG_FB_TFT_UPD161704=m +CONFIG_FB_TFT_WATTEROTT=m +CONFIG_FB_FLEX=m +CONFIG_FB_TFT_FBTFT_DEVICE=m +CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_CLK_TWL6040=y +CONFIG_COMMON_CLK_PALMAS=y +CONFIG_HWSPINLOCK_OMAP=y +CONFIG_ARM_TIMER_SP804=y +CONFIG_PL320_MBOX=y +CONFIG_OMAP_IOMMU=y +CONFIG_ROCKCHIP_IOMMU=y +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_ARM_SMMU=y +CONFIG_OMAP_REMOTEPROC=y +CONFIG_WKUP_M3_RPROC=y +CONFIG_ROCKCHIP_PM_DOMAINS=y +CONFIG_ARCH_TEGRA_124_SOC=y +CONFIG_SOC_TI=y +CONFIG_WKUP_M3_IPC=y +CONFIG_DEVFREQ_GOV_PERFORMANCE=y +CONFIG_DEVFREQ_GOV_POWERSAVE=y +CONFIG_DEVFREQ_GOV_USERSPACE=y +CONFIG_ARM_TEGRA_DEVFREQ=y +CONFIG_EXTCON_GPIO=y +CONFIG_EXTCON_PALMAS=y +CONFIG_EXTCON_USB_GPIO=y +CONFIG_TI_EMIF=y +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_CONFIGFS=m +CONFIG_BMA180=m +CONFIG_BMC150_ACCEL=m +CONFIG_HID_SENSOR_ACCEL_3D=m +CONFIG_IIO_ST_ACCEL_3AXIS=m +CONFIG_KXSD9=m +CONFIG_KXCJK1013=m +CONFIG_MMA7455_I2C=m +CONFIG_MMA7455_SPI=m +CONFIG_MMA8452=m +CONFIG_MMA9551=m +CONFIG_MMA9553=m +CONFIG_MXC4005=m +CONFIG_MXC6255=m +CONFIG_STK8312=m +CONFIG_STK8BA50=m +CONFIG_AD7266=m +CONFIG_AD7291=m +CONFIG_AD7298=m +CONFIG_AD7476=m +CONFIG_AD7791=m +CONFIG_AD7793=m +CONFIG_AD7887=m +CONFIG_AD7923=m +CONFIG_AD799X=m +CONFIG_AXP288_ADC=m +CONFIG_CC10001_ADC=m +CONFIG_HI8435=m +CONFIG_INA2XX_ADC=m +CONFIG_IMX7D_ADC=m +CONFIG_MAX1027=m +CONFIG_MAX1363=m +CONFIG_MCP320X=m +CONFIG_MCP3422=m +CONFIG_NAU7802=m +CONFIG_PALMAS_GPADC=m +CONFIG_ROCKCHIP_SARADC=m +CONFIG_TI_ADC081C=m +CONFIG_TI_ADC0832=m +CONFIG_TI_ADC128S052=m +CONFIG_TI_ADS1015=m +CONFIG_TI_ADS8688=m +CONFIG_TI_AM335X_ADC=m +CONFIG_TWL4030_MADC=m +CONFIG_TWL6030_GPADC=m +CONFIG_VF610_ADC=m +CONFIG_VIPERBOARD_ADC=m +CONFIG_AD8366=m +CONFIG_ATLAS_PH_SENSOR=m +CONFIG_IAQCORE=m +CONFIG_VZ89X=m +CONFIG_AD5064=m +CONFIG_AD5360=m +CONFIG_AD5380=m +CONFIG_AD5421=m +CONFIG_AD5446=m +CONFIG_AD5449=m +CONFIG_AD5504=m +CONFIG_AD5624R_SPI=m +CONFIG_AD5686=m +CONFIG_AD5755=m +CONFIG_AD5761=m +CONFIG_AD5764=m +CONFIG_AD5791=m +CONFIG_AD7303=m +CONFIG_M62332=m +CONFIG_MAX517=m +CONFIG_MAX5821=m +CONFIG_MCP4725=m +CONFIG_MCP4922=m +CONFIG_VF610_DAC=m +CONFIG_AD9523=m +CONFIG_ADF4350=m +CONFIG_ADIS16080=m +CONFIG_ADIS16130=m +CONFIG_ADIS16136=m +CONFIG_ADIS16260=m +CONFIG_ADXRS450=m +CONFIG_BMG160=m +CONFIG_HID_SENSOR_GYRO_3D=m +CONFIG_IIO_ST_GYRO_3AXIS=m +CONFIG_ITG3200=m +CONFIG_AFE4403=m +CONFIG_AFE4404=m +CONFIG_MAX30100=m +CONFIG_DHT11=m +CONFIG_HDC100X=m +CONFIG_HTU21=m +CONFIG_SI7005=m +CONFIG_SI7020=m +CONFIG_ADIS16400=m +CONFIG_ADIS16480=m +CONFIG_KMX61=m +CONFIG_INV_MPU6050_I2C=m +CONFIG_INV_MPU6050_SPI=m +CONFIG_ADJD_S311=m +CONFIG_AL3320A=m +CONFIG_APDS9300=m +CONFIG_APDS9960=m +CONFIG_BH1750=m +CONFIG_CM32181=m +CONFIG_CM3232=m +CONFIG_CM3323=m +CONFIG_CM36651=m +CONFIG_GP2AP020A00F=m +CONFIG_ISL29125=m +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +CONFIG_JSA1212=m +CONFIG_RPR0521=m +CONFIG_LTR501=m +CONFIG_OPT3001=m +CONFIG_PA12203001=m +CONFIG_STK3310=m +CONFIG_TCS3414=m +CONFIG_TCS3472=m +CONFIG_SENSORS_TSL2563=m +CONFIG_TSL4531=m +CONFIG_US5182D=m +CONFIG_VCNL4000=m +CONFIG_AK09911=m +CONFIG_BMC150_MAGN=m +CONFIG_MAG3110=m +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +CONFIG_MMC35240=m +CONFIG_IIO_ST_MAGN_3AXIS=m +CONFIG_SENSORS_HMC5843_I2C=m +CONFIG_SENSORS_HMC5843_SPI=m +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m +CONFIG_IIO_INTERRUPT_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m +CONFIG_MCP4531=m +CONFIG_TPL0102=m +CONFIG_BMP280=m +CONFIG_HID_SENSOR_PRESS=m +CONFIG_MPL115_I2C=m +CONFIG_MPL115_SPI=m +CONFIG_MPL3115=m +CONFIG_MS5611=m +CONFIG_MS5611_I2C=m +CONFIG_MS5611_SPI=m +CONFIG_MS5637=m +CONFIG_IIO_ST_PRESS=m +CONFIG_T5403=m +CONFIG_AS3935=m +CONFIG_LIDAR_LITE_V2=m +CONFIG_SX9500=m +CONFIG_MLX90614=m +CONFIG_TMP006=m +CONFIG_TSYS01=m +CONFIG_TSYS02D=m +CONFIG_PWM_IMX=m +CONFIG_PWM_OMAP_DMTIMER=m +CONFIG_PWM_PCA9685=m +CONFIG_PWM_ROCKCHIP=m +CONFIG_PWM_SUN4I=m +CONFIG_PWM_TEGRA=m +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m +CONFIG_PWM_TWL=m +CONFIG_PWM_TWL_LED=m +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=m +CONFIG_TWL4030_USB=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y +CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_PHY_ROCKCHIP_USB=y +CONFIG_ANDROID=y +CONFIG_ANDROID_BINDER_IPC=y +CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_ROCKCHIP_EFUSE=y +CONFIG_NVMEM_SUNXI_SID=y +CONFIG_NVMEM_VF610_OCOTP=y +CONFIG_FPGA=m +CONFIG_FPGA_MGR_SOCFPGA=m +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ENCRYPTION=y +CONFIG_REISERFS_FS=m +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +CONFIG_XFS_FS=y +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_BTRFS_FS=y +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_F2FS_FS=y +CONFIG_F2FS_FS_SECURITY=y +CONFIG_F2FS_FS_ENCRYPTION=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=y +CONFIG_FSCACHE_STATS=y +CONFIG_CACHEFILES=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_NTFS_RW=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_ADFS_FS=m +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_LOGFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZ4=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BOTH=y +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_EXOFS_FS=m +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_PNFS=y +CONFIG_NFSD_V4_SECURITY_LABEL=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_CEPH_FS=m +CONFIG_CEPH_FSCACHE=y +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_SMB2=y +CONFIG_CIFS_FSCACHE=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +CONFIG_AFS_FSCACHE=y +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y +CONFIG_9P_FS_SECURITY=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y +CONFIG_PRINTK_TIME=y +CONFIG_BOOT_PRINTK_DELAY=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_SCHEDSTATS=y +CONFIG_SCHED_STACK_END_CHECK=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_LIST=y +CONFIG_NOTIFIER_ERROR_INJECTION=m +CONFIG_CPU_NOTIFIER_ERROR_INJECT=m +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_UPROBE_EVENT=y +CONFIG_TEST_USER_COPY=m +CONFIG_TEST_BPF=m +CONFIG_TEST_FIRMWARE=m +CONFIG_TEST_STATIC_KEYS=m +CONFIG_KGDB=y +CONFIG_KGDB_KDB=y +CONFIG_KDB_KEYBOARD=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +CONFIG_SECURITY_TOMOYO=y +CONFIG_SECURITY_APPARMOR=y +CONFIG_SECURITY_YAMA=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_DEV_FSL_CAAM=m +CONFIG_CRYPTO_DEV_OMAP_SHAM=m +CONFIG_CRYPTO_DEV_OMAP_AES=m +CONFIG_CRYPTO_DEV_OMAP_DES=m +CONFIG_CRYPTO_DEV_SAHARA=m +CONFIG_CRYPTO_DEV_SUN4I_SS=m +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +# CONFIG_XZ_DEC_X86 is not set +# CONFIG_XZ_DEC_POWERPC is not set +# CONFIG_XZ_DEC_IA64 is not set +# CONFIG_XZ_DEC_SPARC is not set diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index de1316b..62ebac5 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum) static void mityomapl138_cpufreq_init(const char *partnum) { } #endif -static void read_factory_config(struct memory_accessor *a, void *context) +static void read_factory_config(struct nvmem_device *nvmem, void *context) { int ret; const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; - ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); + ret = nvmem_device_read(nvmem, 0, sizeof(factory_config), + &factory_config); if (ret != sizeof(struct factory_config)) { pr_warn("Read Factory Config Failed: %d\n", ret); goto bad_config; diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index a794f6d..f55ef2e 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info); void __iomem *davinci_intc_base; int davinci_intc_type; -void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) { char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; off_t offset = (off_t)context; /* Read MAC addr from EEPROM */ - if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); } diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 3a55298..aa16f7e 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -72,3 +72,9 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool + +config WAND_RFKILL + tristate "Wandboard RF Kill support" + depends on SOC_IMX6Q + default m + select RFKILL diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index e5cf587..eee36d9 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o +obj-$(CONFIG_WAND_RFKILL) += wand-rfkill.o diff --git b/arch/arm/mach-imx/devices/wand-rfkill.c b/arch/arm/mach-imx/devices/wand-rfkill.c new file mode 100644 index 0000000..da7ef9f --- /dev/null +++ b/arch/arm/mach-imx/devices/wand-rfkill.c @@ -0,0 +1,290 @@ +/* + * arch/arm/mach-imx/devices/wand-rfkill.c + * + * Copyright (C) 2013 Vladimir Ermakov + * + * based on net/rfkill/rfkill-gpio.c + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +struct wand_rfkill_data { + struct rfkill *rfkill_dev; + int shutdown_gpio; + const char *shutdown_name; +}; + +static int wand_rfkill_set_block(void *data, bool blocked) +{ + struct wand_rfkill_data *rfkill = data; + + pr_debug("wandboard-rfkill: set block %d\n", blocked); + + if (blocked) { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 0); + } else { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 1); + } + + return 0; +} + +static const struct rfkill_ops wand_rfkill_ops = { + .set_block = wand_rfkill_set_block, +}; + +static int wand_rfkill_wifi_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int wl_ref_on, wl_rst_n, wl_reg_on, wl_wake, wl_host_wake; + + wl_ref_on = of_get_named_gpio(np, "wifi-ref-on", 0); + wl_rst_n = of_get_named_gpio(np, "wifi-rst-n", 0); + wl_reg_on = of_get_named_gpio(np, "wifi-reg-on", 0); + wl_wake = of_get_named_gpio(np, "wifi-wake", 0); + wl_host_wake = of_get_named_gpio(np, "wifi-host-wake", 0); + + if (!gpio_is_valid(wl_rst_n) || !gpio_is_valid(wl_ref_on) || + !gpio_is_valid(wl_reg_on) || !gpio_is_valid(wl_wake) || + !gpio_is_valid(wl_host_wake)) { + + dev_err(dev, "incorrect wifi gpios (%d %d %d %d %d)\n", + wl_rst_n, wl_ref_on, wl_reg_on, wl_wake, wl_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize wifi chip\n"); + + gpio_request(wl_rst_n, "wl_rst_n"); + gpio_direction_output(wl_rst_n, 0); + msleep(11); + gpio_set_value(wl_rst_n, 1); + + gpio_request(wl_ref_on, "wl_ref_on"); + gpio_direction_output(wl_ref_on, 1); + + gpio_request(wl_reg_on, "wl_reg_on"); + gpio_direction_output(wl_reg_on, 1); + + gpio_request(wl_wake, "wl_wake"); + gpio_direction_output(wl_wake, 1); + + gpio_request(wl_host_wake, "wl_host_wake"); + gpio_direction_input(wl_host_wake); + + rfkill->shutdown_name = "wifi_shutdown"; + rfkill->shutdown_gpio = wl_wake; + + rfkill->rfkill_dev = rfkill_alloc("wifi-rfkill", dev, RFKILL_TYPE_WLAN, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto wifi_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto wifi_fail_unregister; + + dev_info(dev, "wifi-rfkill registered.\n"); + + return 0; + +wifi_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +wifi_fail_free_gpio: + if (gpio_is_valid(wl_rst_n)) gpio_free(wl_rst_n); + if (gpio_is_valid(wl_ref_on)) gpio_free(wl_ref_on); + if (gpio_is_valid(wl_reg_on)) gpio_free(wl_reg_on); + if (gpio_is_valid(wl_wake)) gpio_free(wl_wake); + if (gpio_is_valid(wl_host_wake)) gpio_free(wl_host_wake); + + return ret; +} + +static int wand_rfkill_bt_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int bt_on, bt_wake, bt_host_wake; + + bt_on = of_get_named_gpio(np, "bluetooth-on", 0); + bt_wake = of_get_named_gpio(np, "bluetooth-wake", 0); + bt_host_wake = of_get_named_gpio(np, "bluetooth-host-wake", 0); + + if (!gpio_is_valid(bt_on) || !gpio_is_valid(bt_wake) || + !gpio_is_valid(bt_host_wake)) { + + dev_err(dev, "incorrect bt gpios (%d %d %d)\n", + bt_on, bt_wake, bt_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize bluetooth chip\n"); + + gpio_request(bt_on, "bt_on"); + gpio_direction_output(bt_on, 0); + msleep(11); + gpio_set_value(bt_on, 1); + + gpio_request(bt_wake, "bt_wake"); + gpio_direction_output(bt_wake, 1); + + gpio_request(bt_host_wake, "bt_host_wake"); + gpio_direction_input(bt_host_wake); + + rfkill->shutdown_name = "bluetooth_shutdown"; + rfkill->shutdown_gpio = bt_wake; + + rfkill->rfkill_dev = rfkill_alloc("bluetooth-rfkill", dev, RFKILL_TYPE_BLUETOOTH, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto bt_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto bt_fail_unregister; + + dev_info(dev, "bluetooth-rfkill registered.\n"); + + return 0; + +bt_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +bt_fail_free_gpio: + if (gpio_is_valid(bt_on)) gpio_free(bt_on); + if (gpio_is_valid(bt_wake)) gpio_free(bt_wake); + if (gpio_is_valid(bt_host_wake)) gpio_free(bt_host_wake); + + return ret; +} + +static int wand_rfkill_probe(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill; + struct pinctrl *pinctrl; + int ret; + + dev_info(&pdev->dev, "Wandboard rfkill initialization\n"); + + if (!pdev->dev.of_node) { + dev_err(&pdev->dev, "no device tree node\n"); + return -ENODEV; + } + + rfkill = kzalloc(sizeof(*rfkill) * 2, GFP_KERNEL); + if (!rfkill) + return -ENOMEM; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + int ret = PTR_ERR(pinctrl); + dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret); + return ret; + } + + /* setup WiFi */ + ret = wand_rfkill_wifi_probe(&pdev->dev, pdev->dev.of_node, &rfkill[0]); + if (ret < 0) + goto fail_free_rfkill; + + /* setup bluetooth */ + ret = wand_rfkill_bt_probe(&pdev->dev, pdev->dev.of_node, &rfkill[1]); + if (ret < 0) + goto fail_unregister_wifi; + + platform_set_drvdata(pdev, rfkill); + + return 0; + +fail_unregister_wifi: + if (rfkill[1].rfkill_dev) { + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + } + + /* TODO free gpio */ + +fail_free_rfkill: + kfree(rfkill); + + return ret; +} + +static int wand_rfkill_remove(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill = platform_get_drvdata(pdev); + + dev_info(&pdev->dev, "Module unloading\n"); + + if (!rfkill) + return 0; + + /* WiFi */ + if (gpio_is_valid(rfkill[0].shutdown_gpio)) + gpio_free(rfkill[0].shutdown_gpio); + + rfkill_unregister(rfkill[0].rfkill_dev); + rfkill_destroy(rfkill[0].rfkill_dev); + + /* Bt */ + if (gpio_is_valid(rfkill[1].shutdown_gpio)) + gpio_free(rfkill[1].shutdown_gpio); + + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + + kfree(rfkill); + + return 0; +} + +static struct of_device_id wand_rfkill_match[] = { + { .compatible = "wand,imx6q-wandboard-rfkill", }, + { .compatible = "wand,imx6dl-wandboard-rfkill", }, + { .compatible = "wand,imx6qdl-wandboard-rfkill", }, + {} +}; + +static struct platform_driver wand_rfkill_driver = { + .driver = { + .name = "wandboard-rfkill", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(wand_rfkill_match), + }, + .probe = wand_rfkill_probe, + .remove = wand_rfkill_remove +}; + +module_platform_driver(wand_rfkill_driver); + +MODULE_AUTHOR("Vladimir Ermakov "); +MODULE_DESCRIPTION("Wandboard rfkill driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index f7ff3b9..efcce61 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -123,8 +123,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct omap_device *od; struct omap_hwmod *oh; struct device_node *node = pdev->dev.of_node; - const char *oh_name; - int oh_cnt, i, ret = 0; + const char *oh_name, *rst_name; + int oh_cnt, dstr_cnt, i, ret = 0; bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); @@ -175,6 +175,26 @@ static int omap_device_build_from_dt(struct platform_device *pdev) omap_device_enable(pdev); pm_runtime_set_active(&pdev->dev); } + dstr_cnt = + of_property_count_strings(node, "ti,deassert-hard-reset"); + if (dstr_cnt > 0) { + for (i = 0; i < dstr_cnt; i += 2) { + of_property_read_string_index( + node, "ti,deassert-hard-reset", i, + &oh_name); + of_property_read_string_index( + node, "ti,deassert-hard-reset", i+1, + &rst_name); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + dev_warn(&pdev->dev, + "Cannot parse deassert property for '%s'\n", + oh_name); + break; + } + omap_hwmod_deassert_hardreset(oh, rst_name); + } + } odbfd_exit1: kfree(hwmods); @@ -191,12 +211,21 @@ static int _omap_device_notifier_call(struct notifier_block *nb, { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od; - int err; + int i, err; switch (event) { case BUS_NOTIFY_DEL_DEVICE: - if (pdev->archdata.od) - omap_device_delete(pdev->archdata.od); + od = to_omap_device(pdev); + if (!od) + break; + + for (i = 0; i < od->hwmods_cnt; i++) { + /* shutdown hwmods */ + omap_hwmod_shutdown(od->hwmods[i]); + /* we don't remove clocks cause there's no API to do so */ + /* no harm done, since they will not be created next time */ + } + omap_device_delete(od); break; case BUS_NOTIFY_UNBOUND_DRIVER: od = to_omap_device(pdev); @@ -770,6 +799,8 @@ int omap_device_idle(struct platform_device *pdev) struct omap_device *od; od = to_omap_device(pdev); + if (!od) + return 0; if (od->_state != OMAP_DEVICE_STATE_ENABLED) { dev_warn(&pdev->dev, diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index c88dd24..e96ce25 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -85,6 +85,20 @@ config GPIO_SYSFS Kernel drivers may also request that a particular GPIO be exported to userspace; this can be useful when debugging. +config GPIO_OF_HELPER + bool "GPIO OF helper device (EXPERIMENTAL)" + depends on OF_GPIO + help + Say Y here to add an GPIO OF helper driver + + Allows you specify a GPIO helper based on OF + which allows simple export of GPIO functionality + in user-space. + + Features include, value set/get, direction control, + interrupt/value change poll support, event counting + and others. + config GPIO_GENERIC tristate diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index ece7d7c..895c942 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o obj-$(CONFIG_OF_GPIO) += gpiolib-of.o obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o +obj-$(CONFIG_GPIO_OF_HELPER) += gpio-of-helper.o # Device drivers. Generally keep list sorted alphabetically obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o diff --git b/drivers/gpio/gpio-of-helper.c b/drivers/gpio/gpio-of-helper.c new file mode 100644 index 0000000..a9f260b --- /dev/null +++ b/drivers/gpio/gpio-of-helper.c @@ -0,0 +1,429 @@ +/* + * GPIO OF based helper + * + * A simple DT based driver to provide access to GPIO functionality + * to user-space via sysfs. + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* fwd decl. */ +struct gpio_of_helper_info; + +enum gpio_type { + GPIO_TYPE_INPUT = 0, + GPIO_TYPE_OUTPUT = 1, +}; + +struct gpio_of_entry { + int id; + struct gpio_of_helper_info *info; + struct device_node *node; + enum gpio_type type; + int gpio; + enum of_gpio_flags gpio_flags; + int irq; + const char *name; + atomic64_t counter; + unsigned int count_flags; +#define COUNT_RISING_EDGE (1 << 0) +#define COUNT_FALLING_EDGE (1 << 1) +}; + +struct gpio_of_helper_info { + struct platform_device *pdev; + struct idr idr; +}; + +static const struct of_device_id gpio_of_helper_of_match[] = { + { + .compatible = "gpio-of-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_of_helper_of_match); + +static ssize_t gpio_of_helper_show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + char *p, *e; + int id, n; + + p = buf; + e = p + PAGE_SIZE; + n = 0; + idr_for_each_entry(&info->idr, entry, id) { + switch (entry->type) { + case GPIO_TYPE_INPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s %llu\n", + entry->id, entry->name, entry->gpio, "IN", + (unsigned long long) + atomic64_read(&entry->counter)); + break; + case GPIO_TYPE_OUTPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s\n", + entry->id, entry->name, entry->gpio, "OUT"); + break; + } + p += n; + } + + return p - buf; +} + +static DEVICE_ATTR(status, S_IRUGO, + gpio_of_helper_show_status, NULL); + +static irqreturn_t gpio_of_helper_handler(int irq, void *ptr) +{ + struct gpio_of_entry *entry = ptr; + + /* caution - low speed interfaces only! */ + atomic64_inc(&entry->counter); + + return IRQ_HANDLED; +} + +static struct gpio_of_entry * +gpio_of_entry_create(struct gpio_of_helper_info *info, + struct device_node *node) +{ + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + struct gpio_of_entry *entry; + int err, gpio, irq; + unsigned int req_flags, count_flags, irq_flags; + enum gpio_type type; + enum of_gpio_flags gpio_flags; + const char *name; + + /* get the type of the node first */ + if (of_property_read_bool(node, "input")) + type = GPIO_TYPE_INPUT; + else if (of_property_read_bool(node, "output")) + type = GPIO_TYPE_OUTPUT; + else { + dev_err(dev, "Not valid gpio node type\n"); + err = -EINVAL; + goto err_bad_node; + } + + /* get the name */ + err = of_property_read_string(node, "gpio-name", &name); + if (err != 0) { + dev_err(dev, "Failed to get name property\n"); + goto err_bad_node; + } + + err = of_get_named_gpio_flags(node, "gpio", 0, &gpio_flags); + if (IS_ERR_VALUE(err)) { + dev_err(dev, "Failed to get gpio property of '%s'\n", name); + goto err_bad_node; + } + gpio = err; + + req_flags = 0; + count_flags = 0; + + /* set the request flags */ + switch (type) { + case GPIO_TYPE_INPUT: + req_flags = GPIOF_DIR_IN | GPIOF_EXPORT; + if (of_property_read_bool(node, "count-falling-edge")) + count_flags |= COUNT_FALLING_EDGE; + if (of_property_read_bool(node, "count-rising-edge")) + count_flags |= COUNT_RISING_EDGE; + break; + case GPIO_TYPE_OUTPUT: + req_flags = GPIOF_DIR_OUT | GPIOF_EXPORT; + if (of_property_read_bool(node, "init-high")) + req_flags |= GPIOF_OUT_INIT_HIGH; + else if (of_property_read_bool(node, "init-low")) + req_flags |= GPIOF_OUT_INIT_LOW; + break; + } + if (of_property_read_bool(node, "dir-changeable")) + req_flags |= GPIOF_EXPORT_CHANGEABLE; + + /* request the gpio */ + err = devm_gpio_request_one(dev, gpio, req_flags, name); + if (err != 0) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + irq = -1; + irq_flags = 0; + + /* counter mode requested - need an interrupt */ + if (count_flags != 0) { + irq = gpio_to_irq(gpio); + if (IS_ERR_VALUE(irq)) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + if (count_flags & COUNT_RISING_EDGE) + irq_flags |= IRQF_TRIGGER_RISING; + if (count_flags & COUNT_FALLING_EDGE) + irq_flags |= IRQF_TRIGGER_FALLING; + } + +// if (!idr_pre_get(&info->idr, GFP_KERNEL)) { +// dev_err(dev, "Failed on idr_pre_get of '%s'\n", name); +// err = -ENOMEM; +// goto err_no_mem; +// } + + idr_preload(GFP_KERNEL); + + entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL); + if (entry == NULL) { + dev_err(dev, "Failed to allocate gpio entry of '%s'\n", name); + err = -ENOMEM; + goto err_no_mem; + } + + entry->id = -1; + entry->info = info; + entry->node = of_node_get(node); /* get node reference */ + entry->type = type; + entry->gpio = gpio; + entry->gpio_flags = gpio_flags; + entry->irq = irq; + entry->name = name; + + /* interrupt enable is last thing done */ + if (irq >= 0) { + atomic64_set(&entry->counter, 0); + entry->count_flags = count_flags; + err = devm_request_irq(dev, irq, gpio_of_helper_handler, + irq_flags, name, entry); + if (err != 0) { + dev_err(dev, "Failed to request irq of '%s'\n", name); + goto err_no_irq; + } + } + + /* all done; insert */ +// err = idr_get_new(&info->idr, entry, &entry->id); +// if (IS_ERR_VALUE(err)) { +// dev_err(dev, "Failed to idr_get_new of '%s'\n", name); +// goto err_fail_idr; +// } + + err = idr_alloc(&info->idr, entry, 0, 0, GFP_NOWAIT); + if (err >= 0) + entry->id = err; + + idr_preload_end(); + + if (err < 0) { + dev_err(dev, "Failed to idr_get_new of '%s'\n", name); + goto err_fail_idr; + } + + dev_info(dev, "Allocated GPIO id=%d\n", entry->id); + + return entry; + +err_fail_idr: + /* nothing to do */ +err_no_irq: + /* release node ref */ + of_node_put(node); + /* nothing else needs to be done, devres handles it */ +err_no_mem: +err_bad_node: + return ERR_PTR(err); +} + +static int gpio_of_entry_destroy(struct gpio_of_entry *entry) +{ + struct gpio_of_helper_info *info = entry->info; + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + + dev_info(dev, "Destroying GPIO id=%d\n", entry->id); + + /* remove from the IDR */ + idr_remove(&info->idr, entry->id); + + /* remove node ref */ + of_node_put(entry->node); + + /* free gpio */ + devm_gpio_free(dev, entry->gpio); + + /* gree irq */ + if (entry->irq >= 0) + devm_free_irq(dev, entry->irq, entry); + + /* and free */ + devm_kfree(dev, entry); + + return 0; +} + +static int gpio_of_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_of_helper_info *info; + struct gpio_of_entry *entry; + struct device_node *pnode = pdev->dev.of_node; + struct device_node *cnode; + struct pinctrl *pinctrl; + int err; + + /* we only support OF */ + if (pnode == NULL) { + dev_err(&pdev->dev, "No platform of_node!\n"); + return -ENODEV; + } + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + /* special handling for probe defer */ + if (PTR_ERR(pinctrl) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + } + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (info == NULL) { + dev_err(&pdev->dev, "Failed to allocate info\n"); + err = -ENOMEM; + goto err_no_mem; + } + platform_set_drvdata(pdev, info); + info->pdev = pdev; + + idr_init(&info->idr); + + err = device_create_file(dev, &dev_attr_status); + if (err != 0) { + dev_err(dev, "Failed to create status sysfs attribute\n"); + goto err_no_sysfs; + } + + for_each_child_of_node(pnode, cnode) { + + entry = gpio_of_entry_create(info, cnode); + if (IS_ERR_OR_NULL(entry)) { + dev_err(dev, "Failed to create gpio entry\n"); + err = PTR_ERR(entry); + goto err_fail_entry; + } + } + + dev_info(&pdev->dev, "ready\n"); + + return 0; +err_fail_entry: + device_remove_file(&pdev->dev, &dev_attr_status); +err_no_sysfs: +err_no_mem: + return err; +} + +static int gpio_of_helper_remove(struct platform_device *pdev) +{ + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + int id; + + dev_info(&pdev->dev, "removing\n"); + + device_remove_file(&pdev->dev, &dev_attr_status); + + id = 0; + idr_for_each_entry(&info->idr, entry, id) { + /* destroy each and every one */ + gpio_of_entry_destroy(entry); + } + + return 0; +} + +#ifdef CONFIG_PM +//#ifdef CONFIG_PM_RUNTIME +static int gpio_of_helper_runtime_suspend(struct device *dev) +{ + /* place holder */ + return 0; +} + +static int gpio_of_helper_runtime_resume(struct device *dev) +{ + /* place holder */ + return 0; +} +//#endif /* CONFIG_PM_RUNTIME */ + +static struct dev_pm_ops gpio_of_helper_pm_ops = { + SET_RUNTIME_PM_OPS(gpio_of_helper_runtime_suspend, + gpio_of_helper_runtime_resume, NULL) +}; +#define GPIO_OF_HELPER_PM_OPS (&gpio_of_helper_pm_ops) +#else +#define GPIO_OF_HELPER_PM_OPS NULL +#endif /* CONFIG_PM */ + +struct platform_driver gpio_of_helper_driver = { + .probe = gpio_of_helper_probe, + .remove = gpio_of_helper_remove, + .driver = { + .name = "gpio-of-helper", + .owner = THIS_MODULE, + .pm = GPIO_OF_HELPER_PM_OPS, + .of_match_table = gpio_of_helper_of_match, + }, +}; + +module_platform_driver(gpio_of_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou "); +MODULE_DESCRIPTION("GPIO OF Helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-of-helper"); diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig index 22c7ed6..d19bd80 100644 --- a/drivers/gpu/drm/i2c/Kconfig +++ b/drivers/gpu/drm/i2c/Kconfig @@ -7,6 +7,12 @@ config DRM_I2C_ADV7511 help Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders. +config DRM_I2C_ADIHDMI + tristate "ADI HDMI encoder" + default m if DRM_TILCDC + help + Support for ADI HDMI encoder. + config DRM_I2C_CH7006 tristate "Chrontel ch7006 TV encoder" default m if DRM_NOUVEAU diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile index 2c72eb5..5a509ae 100644 --- a/drivers/gpu/drm/i2c/Makefile +++ b/drivers/gpu/drm/i2c/Makefile @@ -10,3 +10,6 @@ obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o tda998x-y := tda998x_drv.o obj-$(CONFIG_DRM_I2C_NXP_TDA998X) += tda998x.o + +adihdmi-y := adihdmi_drv.o +obj-$(CONFIG_DRM_I2C_ADIHDMI) += adihdmi.o diff --git b/drivers/gpu/drm/i2c/adihdmi.h b/drivers/gpu/drm/i2c/adihdmi.h new file mode 100644 index 0000000..58d9a2b --- /dev/null +++ b/drivers/gpu/drm/i2c/adihdmi.h @@ -0,0 +1,289 @@ +/* + * Analog Devices ADIHDMI HDMI transmitter driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __DRM_I2C_ADIHDMI_H__ +#define __DRM_I2C_ADIHDMI_H__ + +#include + +#define ADIHDMI_REG_CHIP_REVISION 0x00 +#define ADIHDMI_REG_N0 0x01 +#define ADIHDMI_REG_N1 0x02 +#define ADIHDMI_REG_N2 0x03 +#define ADIHDMI_REG_SPDIF_FREQ 0x04 +#define ADIHDMI_REG_CTS_AUTOMATIC1 0x05 +#define ADIHDMI_REG_CTS_AUTOMATIC2 0x06 +#define ADIHDMI_REG_CTS_MANUAL0 0x07 +#define ADIHDMI_REG_CTS_MANUAL1 0x08 +#define ADIHDMI_REG_CTS_MANUAL2 0x09 +#define ADIHDMI_REG_AUDIO_SOURCE 0x0a +#define ADIHDMI_REG_AUDIO_CONFIG 0x0b +#define ADIHDMI_REG_I2S_CONFIG 0x0c +#define ADIHDMI_REG_I2S_WIDTH 0x0d +#define ADIHDMI_REG_AUDIO_SUB_SRC0 0x0e +#define ADIHDMI_REG_AUDIO_SUB_SRC1 0x0f +#define ADIHDMI_REG_AUDIO_SUB_SRC2 0x10 +#define ADIHDMI_REG_AUDIO_SUB_SRC3 0x11 +#define ADIHDMI_REG_AUDIO_CFG1 0x12 +#define ADIHDMI_REG_AUDIO_CFG2 0x13 +#define ADIHDMI_REG_AUDIO_CFG3 0x14 +#define ADIHDMI_REG_I2C_FREQ_ID_CFG 0x15 +#define ADIHDMI_REG_VIDEO_INPUT_CFG1 0x16 +#define ADIHDMI_REG_CSC_UPPER(x) (0x18 + (x) * 2) +#define ADIHDMI_REG_CSC_LOWER(x) (0x19 + (x) * 2) +#define ADIHDMI_REG_SYNC_DECODER(x) (0x30 + (x)) +#define ADIHDMI_REG_DE_GENERATOR (0x35 + (x)) +#define ADIHDMI_REG_PIXEL_REPETITION 0x3b +#define ADIHDMI_REG_VIC_MANUAL 0x3c +#define ADIHDMI_REG_VIC_SEND 0x3d +#define ADIHDMI_REG_VIC_DETECTED 0x3e +#define ADIHDMI_REG_AUX_VIC_DETECTED 0x3f +#define ADIHDMI_REG_PACKET_ENABLE0 0x40 +#define ADIHDMI_REG_POWER 0x41 +#define ADIHDMI_REG_STATUS 0x42 +#define ADIHDMI_REG_EDID_I2C_ADDR 0x43 +#define ADIHDMI_REG_PACKET_ENABLE1 0x44 +#define ADIHDMI_REG_PACKET_I2C_ADDR 0x45 +#define ADIHDMI_REG_DSD_ENABLE 0x46 +#define ADIHDMI_REG_VIDEO_INPUT_CFG2 0x48 +#define ADIHDMI_REG_INFOFRAME_UPDATE 0x4a +#define ADIHDMI_REG_GC(x) (0x4b + (x)) /* 0x4b - 0x51 */ +#define ADIHDMI_REG_AVI_INFOFRAME_VERSION 0x52 +#define ADIHDMI_REG_AVI_INFOFRAME_LENGTH 0x53 +#define ADIHDMI_REG_AVI_INFOFRAME_CHECKSUM 0x54 +#define ADIHDMI_REG_AVI_INFOFRAME(x) (0x55 + (x)) /* 0x55 - 0x6f */ +#define ADIHDMI_REG_AUDIO_INFOFRAME_VERSION 0x70 +#define ADIHDMI_REG_AUDIO_INFOFRAME_LENGTH 0x71 +#define ADIHDMI_REG_AUDIO_INFOFRAME_CHECKSUM 0x72 +#define ADIHDMI_REG_AUDIO_INFOFRAME(x) (0x73 + (x)) /* 0x73 - 0x7c */ +#define ADIHDMI_REG_INT_ENABLE(x) (0x94 + (x)) +#define ADIHDMI_REG_INT(x) (0x96 + (x)) +#define ADIHDMI_REG_INPUT_CLK_DIV 0x9d +#define ADIHDMI_REG_PLL_STATUS 0x9e +#define ADIHDMI_REG_HDMI_POWER 0xa1 +#define ADIHDMI_REG_HDCP_HDMI_CFG 0xaf +#define ADIHDMI_REG_AN(x) (0xb0 + (x)) /* 0xb0 - 0xb7 */ +#define ADIHDMI_REG_HDCP_STATUS 0xb8 +#define ADIHDMI_REG_BCAPS 0xbe +#define ADIHDMI_REG_BKSV(x) (0xc0 + (x)) /* 0xc0 - 0xc3 */ +#define ADIHDMI_REG_EDID_SEGMENT 0xc4 +#define ADIHDMI_REG_DDC_STATUS 0xc8 +#define ADIHDMI_REG_EDID_READ_CTRL 0xc9 +#define ADIHDMI_REG_BSTATUS(x) (0xca + (x)) /* 0xca - 0xcb */ +#define ADIHDMI_REG_TIMING_GEN_SEQ 0xd0 +#define ADIHDMI_REG_POWER2 0xd6 +#define ADIHDMI_REG_HSYNC_PLACEMENT_MSB 0xfa + +#define ADIHDMI_REG_SYNC_ADJUSTMENT(x) (0xd7 + (x)) /* 0xd7 - 0xdc */ +#define ADIHDMI_REG_TMDS_CLOCK_INV 0xde +#define ADIHDMI_REG_ARC_CTRL 0xdf +#define ADIHDMI_REG_CEC_I2C_ADDR 0xe1 +#define ADIHDMI_REG_CEC_CTRL 0xe2 +#define ADIHDMI_REG_CHIP_ID_HIGH 0xf5 +#define ADIHDMI_REG_CHIP_ID_LOW 0xf6 + +#define ADIHDMI_CSC_ENABLE BIT(7) +#define ADIHDMI_CSC_UPDATE_MODE BIT(5) + +#define ADIHDMI_INT0_HDP BIT(7) +#define ADIHDMI_INT0_VSYNC BIT(5) +#define ADIHDMI_INT0_AUDIO_FIFO_FULL BIT(4) +#define ADIHDMI_INT0_EDID_READY BIT(2) +#define ADIHDMI_INT0_HDCP_AUTHENTICATED BIT(1) + +#define ADIHDMI_INT1_DDC_ERROR BIT(7) +#define ADIHDMI_INT1_BKSV BIT(6) +#define ADIHDMI_INT1_CEC_TX_READY BIT(5) +#define ADIHDMI_INT1_CEC_TX_ARBIT_LOST BIT(4) +#define ADIHDMI_INT1_CEC_TX_RETRY_TIMEOUT BIT(3) +#define ADIHDMI_INT1_CEC_RX_READY3 BIT(2) +#define ADIHDMI_INT1_CEC_RX_READY2 BIT(1) +#define ADIHDMI_INT1_CEC_RX_READY1 BIT(0) + +#define ADIHDMI_ARC_CTRL_POWER_DOWN BIT(0) + +#define ADIHDMI_CEC_CTRL_POWER_DOWN BIT(0) + +#define ADIHDMI_POWER_POWER_DOWN BIT(6) + +#define ADIHDMI_HDMI_CFG_MODE_MASK 0x2 +#define ADIHDMI_HDMI_CFG_MODE_DVI 0x0 +#define ADIHDMI_HDMI_CFG_MODE_HDMI 0x2 + +#define ADIHDMI_AUDIO_SELECT_I2C 0x0 +#define ADIHDMI_AUDIO_SELECT_SPDIF 0x1 +#define ADIHDMI_AUDIO_SELECT_DSD 0x2 +#define ADIHDMI_AUDIO_SELECT_HBR 0x3 +#define ADIHDMI_AUDIO_SELECT_DST 0x4 + +#define ADIHDMI_I2S_SAMPLE_LEN_16 0x2 +#define ADIHDMI_I2S_SAMPLE_LEN_20 0x3 +#define ADIHDMI_I2S_SAMPLE_LEN_18 0x4 +#define ADIHDMI_I2S_SAMPLE_LEN_22 0x5 +#define ADIHDMI_I2S_SAMPLE_LEN_19 0x8 +#define ADIHDMI_I2S_SAMPLE_LEN_23 0x9 +#define ADIHDMI_I2S_SAMPLE_LEN_24 0xb +#define ADIHDMI_I2S_SAMPLE_LEN_17 0xc +#define ADIHDMI_I2S_SAMPLE_LEN_21 0xd + +#define ADIHDMI_SAMPLE_FREQ_44100 0x0 +#define ADIHDMI_SAMPLE_FREQ_48000 0x2 +#define ADIHDMI_SAMPLE_FREQ_32000 0x3 +#define ADIHDMI_SAMPLE_FREQ_88200 0x8 +#define ADIHDMI_SAMPLE_FREQ_96000 0xa +#define ADIHDMI_SAMPLE_FREQ_176400 0xc +#define ADIHDMI_SAMPLE_FREQ_192000 0xe + +#define ADIHDMI_STATUS_POWER_DOWN_POLARITY BIT(7) +#define ADIHDMI_STATUS_HPD BIT(6) +#define ADIHDMI_STATUS_MONITOR_SENSE BIT(5) +#define ADIHDMI_STATUS_I2S_32BIT_MODE BIT(3) + +#define ADIHDMI_PACKET_ENABLE_N_CTS BIT(8+6) +#define ADIHDMI_PACKET_ENABLE_AUDIO_SAMPLE BIT(8+5) +#define ADIHDMI_PACKET_ENABLE_AVI_INFOFRAME BIT(8+4) +#define ADIHDMI_PACKET_ENABLE_AUDIO_INFOFRAME BIT(8+3) +#define ADIHDMI_PACKET_ENABLE_GC BIT(7) +#define ADIHDMI_PACKET_ENABLE_SPD BIT(6) +#define ADIHDMI_PACKET_ENABLE_MPEG BIT(5) +#define ADIHDMI_PACKET_ENABLE_ACP BIT(4) +#define ADIHDMI_PACKET_ENABLE_ISRC BIT(3) +#define ADIHDMI_PACKET_ENABLE_GM BIT(2) +#define ADIHDMI_PACKET_ENABLE_SPARE2 BIT(1) +#define ADIHDMI_PACKET_ENABLE_SPARE1 BIT(0) + +#define ADIHDMI_REG_POWER2_HDP_SRC_MASK 0xc0 +#define ADIHDMI_REG_POWER2_HDP_SRC_BOTH 0x00 +#define ADIHDMI_REG_POWER2_HDP_SRC_HDP 0x40 +#define ADIHDMI_REG_POWER2_HDP_SRC_CEC 0x80 +#define ADIHDMI_REG_POWER2_HDP_SRC_NONE 0xc0 +#define ADIHDMI_REG_POWER2_TDMS_ENABLE BIT(4) +#define ADIHDMI_REG_POWER2_GATE_INPUT_CLK BIT(0) + +#define ADIHDMI_LOW_REFRESH_RATE_NONE 0x0 +#define ADIHDMI_LOW_REFRESH_RATE_24HZ 0x1 +#define ADIHDMI_LOW_REFRESH_RATE_25HZ 0x2 +#define ADIHDMI_LOW_REFRESH_RATE_30HZ 0x3 + +#define ADIHDMI_AUDIO_CFG3_LEN_MASK 0x0f +#define ADIHDMI_I2C_FREQ_ID_CFG_RATE_MASK 0xf0 + +#define ADIHDMI_AUDIO_SOURCE_I2S 0 +#define ADIHDMI_AUDIO_SOURCE_SPDIF 1 + +#define ADIHDMI_I2S_FORMAT_I2S 0 +#define ADIHDMI_I2S_FORMAT_RIGHT_J 1 +#define ADIHDMI_I2S_FORMAT_LEFT_J 2 + +#define ADIHDMI_PACKET(p, x) ((p) * 0x20 + (x)) +#define ADIHDMI_PACKET_SDP(x) ADIHDMI_PACKET(0, x) +#define ADIHDMI_PACKET_MPEG(x) ADIHDMI_PACKET(1, x) +#define ADIHDMI_PACKET_ACP(x) ADIHDMI_PACKET(2, x) +#define ADIHDMI_PACKET_ISRC1(x) ADIHDMI_PACKET(3, x) +#define ADIHDMI_PACKET_ISRC2(x) ADIHDMI_PACKET(4, x) +#define ADIHDMI_PACKET_GM(x) ADIHDMI_PACKET(5, x) +#define ADIHDMI_PACKET_SPARE(x) ADIHDMI_PACKET(6, x) + +enum adihdmi_input_clock { + ADIHDMI_INPUT_CLOCK_1X, + ADIHDMI_INPUT_CLOCK_2X, + ADIHDMI_INPUT_CLOCK_DDR, +}; + +enum adihdmi_input_justification { + ADIHDMI_INPUT_JUSTIFICATION_EVENLY = 0, + ADIHDMI_INPUT_JUSTIFICATION_RIGHT = 1, + ADIHDMI_INPUT_JUSTIFICATION_LEFT = 2, +}; + +enum adihdmi_input_sync_pulse { + ADIHDMI_INPUT_SYNC_PULSE_DE = 0, + ADIHDMI_INPUT_SYNC_PULSE_HSYNC = 1, + ADIHDMI_INPUT_SYNC_PULSE_VSYNC = 2, + ADIHDMI_INPUT_SYNC_PULSE_NONE = 3, +}; + +/** + * enum adihdmi_sync_polarity - Polarity for the input sync signals + * @ADIHDMI_SYNC_POLARITY_PASSTHROUGH: Sync polarity matches that of + * the currently configured mode. + * @ADIHDMI_SYNC_POLARITY_LOW: Sync polarity is low + * @ADIHDMI_SYNC_POLARITY_HIGH: Sync polarity is high + * + * If the polarity is set to either LOW or HIGH the driver will configure the + * ADIHDMI to internally invert the sync signal if required to match the sync + * polarity setting for the currently selected output mode. + * + * If the polarity is set to PASSTHROUGH, the ADIHDMI will route the signal + * unchanged. This is used when the upstream graphics core already generates + * the sync signals with the correct polarity. + */ +enum adihdmi_sync_polarity { + ADIHDMI_SYNC_POLARITY_PASSTHROUGH, + ADIHDMI_SYNC_POLARITY_LOW, + ADIHDMI_SYNC_POLARITY_HIGH, +}; + +/** + * struct adihdmi_link_config - Describes adihdmi hardware configuration + * @input_color_depth: Number of bits per color component (8, 10 or 12) + * @input_colorspace: The input colorspace (RGB, YUV444, YUV422) + * @input_clock: The input video clock style (1x, 2x, DDR) + * @input_style: The input component arrangement variant + * @input_justification: Video input format bit justification + * @clock_delay: Clock delay for the input clock (in ps) + * @embedded_sync: Video input uses BT.656-style embedded sync + * @sync_pulse: Select the sync pulse + * @vsync_polarity: vsync input signal configuration + * @hsync_polarity: hsync input signal configuration + */ +struct adihdmi_link_config { + unsigned int input_color_depth; + enum hdmi_colorspace input_colorspace; + enum adihdmi_input_clock input_clock; + unsigned int input_style; + enum adihdmi_input_justification input_justification; + + int clock_delay; + + bool embedded_sync; + enum adihdmi_input_sync_pulse sync_pulse; + enum adihdmi_sync_polarity vsync_polarity; + enum adihdmi_sync_polarity hsync_polarity; +}; + +/** + * enum adihdmi_csc_scaling - Scaling factor for the ADIHDMI CSC + * @ADIHDMI_CSC_SCALING_1: CSC results are not scaled + * @ADIHDMI_CSC_SCALING_2: CSC results are scaled by a factor of two + * @ADIHDMI_CSC_SCALING_4: CSC results are scalled by a factor of four + */ +enum adihdmi_csc_scaling { + ADIHDMI_CSC_SCALING_1 = 0, + ADIHDMI_CSC_SCALING_2 = 1, + ADIHDMI_CSC_SCALING_4 = 2, +}; + +/** + * struct adihdmi_video_config - Describes adihdmi hardware configuration + * @csc_enable: Whether to enable color space conversion + * @csc_scaling_factor: Color space conversion scaling factor + * @csc_coefficents: Color space conversion coefficents + * @hdmi_mode: Whether to use HDMI or DVI output mode + * @avi_infoframe: HDMI infoframe + */ +struct adihdmi_video_config { + bool csc_enable; + enum adihdmi_csc_scaling csc_scaling_factor; + const uint16_t *csc_coefficents; + + bool hdmi_mode; + struct hdmi_avi_infoframe avi_infoframe; +}; + +#endif /* __DRM_I2C_ADIHDMI_H__ */ diff --git b/drivers/gpu/drm/i2c/adihdmi_drv.c b/drivers/gpu/drm/i2c/adihdmi_drv.c new file mode 100644 index 0000000..6792224 --- /dev/null +++ b/drivers/gpu/drm/i2c/adihdmi_drv.c @@ -0,0 +1,1268 @@ +/* + * Analog Devices ADIHDMI HDMI transmitter driver + * + * Copyright 2012 Analog Devices Inc. + * Copyright 2015 Konsulko Group + * + * Licensed under the GPL-2. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "adihdmi.h" + +#define ADIHDMI_INFOFRAME_PACKETS (0x7900) + +struct adihdmi { + struct i2c_client *i2c_main; + struct i2c_client *i2c_edid; + + struct regmap *regmap; + struct regmap *packet_memory_regmap; + enum drm_connector_status status; + bool powered; + + unsigned int f_tmds; + + unsigned int current_edid_segment; + uint8_t edid_buf[256]; + bool edid_read; + + wait_queue_head_t wq; + struct drm_encoder *encoder; + + bool embedded_sync; + enum adihdmi_sync_polarity vsync_polarity; + enum adihdmi_sync_polarity hsync_polarity; + bool rgb; + + struct edid *edid; + + struct gpio_desc *gpio_pd; +}; + +struct adihdmi2 { + struct adihdmi base; + struct drm_encoder encoder; + struct drm_connector connector; +}; + +/* ADI recommended values for proper operation. */ +static const struct reg_sequence adihdmi_fixed_registers[] = { + { 0x98, 0x03 }, + { 0x9a, 0xe0 }, + { 0x9c, 0x30 }, + { 0x9d, 0x61 }, + { 0xa2, 0xa4 }, + { 0xa3, 0xa4 }, + { 0xe0, 0xd0 }, + { 0xf9, 0x00 }, + { 0x55, 0x02 }, +}; + +/* ----------------------------------------------------------------------------- + * Register access + */ + +static const uint8_t adihdmi_register_defaults[] = { + 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */ + 0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13, + 0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */ + 0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84, + 0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */ + 0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */ + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0, + 0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */ + 0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */ + 0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00, + 0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */ + 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */ + 0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04, + 0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01, + 0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */ + 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static bool adihdmi_register_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ADIHDMI_REG_CHIP_REVISION: + case ADIHDMI_REG_SPDIF_FREQ: + case ADIHDMI_REG_CTS_AUTOMATIC1: + case ADIHDMI_REG_CTS_AUTOMATIC2: + case ADIHDMI_REG_VIC_DETECTED: + case ADIHDMI_REG_VIC_SEND: + case ADIHDMI_REG_AUX_VIC_DETECTED: + case ADIHDMI_REG_STATUS: + case ADIHDMI_REG_GC(1): + case ADIHDMI_REG_INT(0): + case ADIHDMI_REG_INT(1): + case ADIHDMI_REG_PLL_STATUS: + case ADIHDMI_REG_AN(0): + case ADIHDMI_REG_AN(1): + case ADIHDMI_REG_AN(2): + case ADIHDMI_REG_AN(3): + case ADIHDMI_REG_AN(4): + case ADIHDMI_REG_AN(5): + case ADIHDMI_REG_AN(6): + case ADIHDMI_REG_AN(7): + case ADIHDMI_REG_HDCP_STATUS: + case ADIHDMI_REG_BCAPS: + case ADIHDMI_REG_BKSV(0): + case ADIHDMI_REG_BKSV(1): + case ADIHDMI_REG_BKSV(2): + case ADIHDMI_REG_BKSV(3): + case ADIHDMI_REG_BKSV(4): + case ADIHDMI_REG_DDC_STATUS: + case ADIHDMI_REG_BSTATUS(0): + case ADIHDMI_REG_BSTATUS(1): + case ADIHDMI_REG_CHIP_ID_HIGH: + case ADIHDMI_REG_CHIP_ID_LOW: + return true; + } + + return false; +} + +static const struct regmap_config adihdmi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0xff, + .cache_type = REGCACHE_RBTREE, + .reg_defaults_raw = adihdmi_register_defaults, + .num_reg_defaults_raw = ARRAY_SIZE(adihdmi_register_defaults), + + .volatile_reg = adihdmi_register_volatile, +}; + +/* ----------------------------------------------------------------------------- + * Hardware configuration + */ + + static void adihdmi_audio_setup(struct adihdmi * adihdmi) +{ + /* Select I2S. */ + regmap_write(adihdmi->regmap, ADIHDMI_REG_AUDIO_SOURCE, 0x01); + regmap_write(adihdmi->regmap, ADIHDMI_REG_I2S_CONFIG, 0x84); + + /* Setup clocks for 48KHz. */ + regmap_write(adihdmi->regmap, ADIHDMI_REG_N0, 0x00); + regmap_write(adihdmi->regmap, ADIHDMI_REG_N1, 0x18); + regmap_write(adihdmi->regmap, ADIHDMI_REG_N2, 0x00); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_I2C_FREQ_ID_CFG, 0xF0, 0x20); + + /* Set audio word length to 24 bits. */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_AUDIO_CFG3, 0x0F, 0x0B); + + /* Update audio infoframe. */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_INFOFRAME_UPDATE, 0x20, 0x20); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_AUDIO_INFOFRAME(0), 0x07, 0x01); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_AUDIO_INFOFRAME(3), 0x1F, 0x00); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_INFOFRAME_UPDATE, 0x20, 0x00); +} + +static void adihdmi_set_colormap(struct adihdmi *adihdmi, bool enable, + const uint16_t *coeff, + unsigned int scaling_factor) +{ + unsigned int i; + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_CSC_UPPER(1), + ADIHDMI_CSC_UPDATE_MODE, ADIHDMI_CSC_UPDATE_MODE); + + if (enable) { + for (i = 0; i < 12; ++i) { + regmap_update_bits(adihdmi->regmap, + ADIHDMI_REG_CSC_UPPER(i), + 0x1f, coeff[i] >> 8); + regmap_write(adihdmi->regmap, + ADIHDMI_REG_CSC_LOWER(i), + coeff[i] & 0xff); + } + } + + if (enable) + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_CSC_UPPER(0), + 0xe0, 0x80 | (scaling_factor << 5)); + else + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_CSC_UPPER(0), + 0x80, 0x00); + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_CSC_UPPER(1), + ADIHDMI_CSC_UPDATE_MODE, 0); +} + +static int adihdmi_packet_enable(struct adihdmi *adihdmi, unsigned int packet) +{ + if (packet & 0xff) + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_PACKET_ENABLE0, + packet, 0xff); + + if (packet & 0xff00) { + packet >>= 8; + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_PACKET_ENABLE1, + packet, 0xff); + } + + return 0; +} + +static int adihdmi_packet_disable(struct adihdmi *adihdmi, unsigned int packet) +{ + if (packet & 0xff) + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_PACKET_ENABLE0, + packet, 0x00); + + if (packet & 0xff00) { + packet >>= 8; + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_PACKET_ENABLE1, + packet, 0x00); + } + + return 0; +} + +/* Coefficients for adihdmi color space conversion */ +static const uint16_t adihdmi_csc_ycbcr_to_rgb[] = { + 0x0734, 0x04ad, 0x0000, 0x1c1b, + 0x1ddc, 0x04ad, 0x1f24, 0x0135, + 0x0000, 0x04ad, 0x087c, 0x1b77, +}; + +static void adihdmi_set_config_csc(struct adihdmi *adihdmi, + struct drm_connector *connector, + bool rgb) +{ + struct adihdmi_video_config config; + bool output_format_422, output_format_ycbcr; + unsigned int mode; + uint8_t infoframe[17]; + + if (adihdmi->edid) + config.hdmi_mode = drm_detect_hdmi_monitor(adihdmi->edid); + else + config.hdmi_mode = false; + + hdmi_avi_infoframe_init(&config.avi_infoframe); + + config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN; + + if (rgb) { + config.csc_enable = false; + config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB; + } else { + config.csc_scaling_factor = ADIHDMI_CSC_SCALING_4; + config.csc_coefficents = adihdmi_csc_ycbcr_to_rgb; + + if ((connector->display_info.color_formats & + DRM_COLOR_FORMAT_YCRCB422) && + config.hdmi_mode) { + config.csc_enable = false; + config.avi_infoframe.colorspace = + HDMI_COLORSPACE_YUV422; + } else { + config.csc_enable = true; + config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB; + } + } + + if (config.hdmi_mode) { + mode = ADIHDMI_HDMI_CFG_MODE_HDMI; + + switch (config.avi_infoframe.colorspace) { + case HDMI_COLORSPACE_YUV444: + output_format_422 = false; + output_format_ycbcr = true; + break; + case HDMI_COLORSPACE_YUV422: + output_format_422 = true; + output_format_ycbcr = true; + break; + default: + output_format_422 = false; + output_format_ycbcr = false; + break; + } + } else { + mode = ADIHDMI_HDMI_CFG_MODE_DVI; + output_format_422 = false; + output_format_ycbcr = false; + } + + adihdmi_packet_disable(adihdmi, ADIHDMI_INFOFRAME_PACKETS); + + adihdmi_set_colormap(adihdmi, config.csc_enable, + config.csc_coefficents, + config.csc_scaling_factor); + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_VIDEO_INPUT_CFG1, 0x81, + (output_format_422 << 7) | output_format_ycbcr); + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_HDCP_HDMI_CFG, + ADIHDMI_HDMI_CFG_MODE_MASK, mode); + + hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe, + sizeof(infoframe)); + + /* The AVI infoframe id is not configurable */ + regmap_bulk_write(adihdmi->regmap, ADIHDMI_REG_AVI_INFOFRAME_VERSION, + infoframe + 1, sizeof(infoframe) - 1); + + adihdmi_packet_enable(adihdmi, ADIHDMI_INFOFRAME_PACKETS); +} + +static void adihdmi_set_link_config(struct adihdmi *adihdmi, + const struct adihdmi_link_config *config) +{ + /* + * The input style values documented in the datasheet don't match the + * hardware register field values :-( + */ + static const unsigned int input_styles[4] = { 0, 2, 1, 3 }; + + unsigned int clock_delay; + unsigned int color_depth; + unsigned int input_id; + + clock_delay = (config->clock_delay + 1200) / 400; + color_depth = config->input_color_depth == 8 ? 3 + : (config->input_color_depth == 10 ? 1 : 2); + + /* TODO Support input ID 6 */ + if (config->input_colorspace != HDMI_COLORSPACE_YUV422) + input_id = config->input_clock == ADIHDMI_INPUT_CLOCK_DDR + ? 5 : 0; + else if (config->input_clock == ADIHDMI_INPUT_CLOCK_DDR) + input_id = config->embedded_sync ? 8 : 7; + else if (config->input_clock == ADIHDMI_INPUT_CLOCK_2X) + input_id = config->embedded_sync ? 4 : 3; + else + input_id = config->embedded_sync ? 2 : 1; + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_I2C_FREQ_ID_CFG, 0xf, + input_id); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_VIDEO_INPUT_CFG1, 0x7e, + (color_depth << 4) | + (input_styles[config->input_style] << 2)); + regmap_write(adihdmi->regmap, ADIHDMI_REG_VIDEO_INPUT_CFG2, + config->input_justification << 3); + regmap_write(adihdmi->regmap, ADIHDMI_REG_TIMING_GEN_SEQ, + config->sync_pulse << 2); + + regmap_write(adihdmi->regmap, 0xba, clock_delay << 5); + + adihdmi->embedded_sync = config->embedded_sync; + adihdmi->hsync_polarity = config->hsync_polarity; + adihdmi->vsync_polarity = config->vsync_polarity; + adihdmi->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB; +} + +static void adihdmi_power_on(struct adihdmi *adihdmi) +{ + adihdmi->current_edid_segment = -1; + + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(0), + ADIHDMI_INT0_EDID_READY); + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(1), + ADIHDMI_INT1_DDC_ERROR); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER, + ADIHDMI_POWER_POWER_DOWN, 0); + + /* + * Per spec it is allowed to pulse the HDP signal to indicate that the + * EDID information has changed. Some monitors do this when they wakeup + * from standby or are enabled. When the HDP goes low the adihdmi is + * reset and the outputs are disabled which might cause the monitor to + * go to standby again. To avoid this we ignore the HDP pin for the + * first few seconds after enabling the output. + */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER2, + ADIHDMI_REG_POWER2_HDP_SRC_MASK, + ADIHDMI_REG_POWER2_HDP_SRC_NONE); + + /* + * Most of the registers are reset during power down or when HPD is low. + */ + regcache_sync(adihdmi->regmap); + + adihdmi->powered = true; +} + +static void adihdmi_power_off(struct adihdmi *adihdmi) +{ + /* TODO: setup additional power down modes */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER, + ADIHDMI_POWER_POWER_DOWN, + ADIHDMI_POWER_POWER_DOWN); + regcache_mark_dirty(adihdmi->regmap); + + adihdmi->powered = false; +} + +/* ----------------------------------------------------------------------------- + * Interrupt and hotplug detection + */ + +static bool adihdmi_hpd(struct adihdmi *adihdmi) +{ + unsigned int irq0; + int ret; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_INT(0), &irq0); + if (ret < 0) + return false; + + if (irq0 & ADIHDMI_INT0_HDP) { + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(0), + ADIHDMI_INT0_HDP); + return true; + } + + return false; +} + +static int adihdmi_irq_process(struct adihdmi *adihdmi) +{ + unsigned int irq0, irq1; + int ret; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_INT(0), &irq0); + if (ret < 0) + return ret; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_INT(1), &irq1); + if (ret < 0) + return ret; + + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(0), irq0); + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(1), irq1); + + if (irq0 & ADIHDMI_INT0_HDP) + drm_helper_hpd_irq_event(adihdmi->encoder->dev); + + if (irq0 & ADIHDMI_INT0_EDID_READY || irq1 & ADIHDMI_INT1_DDC_ERROR) { + adihdmi->edid_read = true; + + if (adihdmi->i2c_main->irq) + wake_up_all(&adihdmi->wq); + } + + return 0; +} + +static irqreturn_t adihdmi_irq_handler(int irq, void *devid) +{ + struct adihdmi *adihdmi = devid; + int ret; + + ret = adihdmi_irq_process(adihdmi); + return ret < 0 ? IRQ_NONE : IRQ_HANDLED; +} + +/* ----------------------------------------------------------------------------- + * EDID retrieval + */ + +static int adihdmi_wait_for_edid(struct adihdmi *adihdmi, int timeout) +{ + int ret; + + if (adihdmi->i2c_main->irq) { + ret = wait_event_interruptible_timeout(adihdmi->wq, + adihdmi->edid_read, msecs_to_jiffies(timeout)); + } else { + for (; timeout > 0; timeout -= 25) { + ret = adihdmi_irq_process(adihdmi); + if (ret < 0) + break; + + if (adihdmi->edid_read) + break; + + msleep(25); + } + } + + return adihdmi->edid_read ? 0 : -EIO; +} + +static int adihdmi_get_edid_block(void *data, u8 *buf, unsigned int block, + size_t len) +{ + struct adihdmi *adihdmi = data; + struct i2c_msg xfer[2]; + uint8_t offset; + unsigned int i; + int ret; + + if (len > 128) + return -EINVAL; + + if (adihdmi->current_edid_segment != block / 2) { + unsigned int status; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_DDC_STATUS, + &status); + if (ret < 0) + return ret; + + if (status != 2) { + adihdmi->edid_read = false; + regmap_write(adihdmi->regmap, ADIHDMI_REG_EDID_SEGMENT, + block); + ret = adihdmi_wait_for_edid(adihdmi, 200); + if (ret < 0) + return ret; + } + + /* Break this apart, hopefully more I2C controllers will + * support 64 byte transfers than 256 byte transfers + */ + + xfer[0].addr = adihdmi->i2c_edid->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = &offset; + xfer[1].addr = adihdmi->i2c_edid->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = 64; + xfer[1].buf = adihdmi->edid_buf; + + offset = 0; + + for (i = 0; i < 4; ++i) { + ret = i2c_transfer(adihdmi->i2c_edid->adapter, xfer, + ARRAY_SIZE(xfer)); + if (ret < 0) + return ret; + else if (ret != 2) + return -EIO; + + xfer[1].buf += 64; + offset += 64; + } + + adihdmi->current_edid_segment = block / 2; + } + + if (block % 2 == 0) + memcpy(buf, adihdmi->edid_buf, len); + else + memcpy(buf, adihdmi->edid_buf + 128, len); + + return 0; +} + +static int adihdmi_mode_valid(struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +/* ----------------------------------------------------------------------------- + * DT and private structure operations + */ + +#define conn_to_adihdmi2(x) \ + container_of(x, struct adihdmi2, connector); + +#define enc_to_adihdmi2(x) \ + container_of(x, struct adihdmi2, encoder); + +#define enc_to_adihdmi(x) \ + (&(container_of(x, struct adihdmi2, encoder)->base)) + +static int adihdmi_parse_dt(struct device_node *np, + struct adihdmi_link_config *config) +{ + memset(config, 0, sizeof(*config)); + + config->input_color_depth = 8; + + config->input_colorspace = HDMI_COLORSPACE_RGB; + //config->input_colorspace = HDMI_COLORSPACE_YUV422; + //config->input_colorspace = HDMI_COLORSPACE_YUV444; + + config->input_clock = ADIHDMI_INPUT_CLOCK_1X; + //config->input_clock = ADIHDMI_INPUT_CLOCK_2X; + //config->input_clock = ADIHDMI_INPUT_CLOCK_DDR; + + if (config->input_colorspace == HDMI_COLORSPACE_YUV422 || + config->input_clock != ADIHDMI_INPUT_CLOCK_1X) { + + config->input_style = 1; + //config->input_justification = ADIHDMI_INPUT_JUSTIFICATION_LEFT; + config->input_justification = ADIHDMI_INPUT_JUSTIFICATION_EVENLY; + //config->input_justification = ADIHDMI_INPUT_JUSTIFICATION_RIGHT; + + } else { + config->input_style = 1; + config->input_justification = ADIHDMI_INPUT_JUSTIFICATION_LEFT; + } + + config->clock_delay = 0; + config->embedded_sync = 0; + + /* Hardcode the sync pulse configurations for now. */ + config->sync_pulse = ADIHDMI_INPUT_SYNC_PULSE_NONE; + config->vsync_polarity = ADIHDMI_SYNC_POLARITY_PASSTHROUGH; + config->hsync_polarity = ADIHDMI_SYNC_POLARITY_PASSTHROUGH; + + return 0; +} + +static const int edid_i2c_addr = 0x7e; +static const int packet_i2c_addr = 0x70; +static const int cec_i2c_addr = 0x78; + +static int adihdmi_create(struct i2c_client *i2c, struct adihdmi *adihdmi) +{ + struct adihdmi_link_config link_config; + struct device *dev = &i2c->dev; + unsigned int val; + int ret; + + adihdmi->powered = false; + adihdmi->status = connector_status_disconnected; + + ret = adihdmi_parse_dt(NULL, &link_config); + if (ret) + { + pr_err("%s - %d - Bad parse\n", __FUNCTION__, __LINE__); + return -EINVAL; + } + + /* + * The power down GPIO is optional. If present, toggle it from active to + * inactive to wake up the encoder. + */ + adihdmi->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH); + if (IS_ERR(adihdmi->gpio_pd)) + { + pr_err("%s - %d - Bad PD GPIO\n", __FUNCTION__, __LINE__); + return PTR_ERR(adihdmi->gpio_pd); + } + + if (adihdmi->gpio_pd) { + mdelay(5); + gpiod_set_value_cansleep(adihdmi->gpio_pd, 0); + } + + adihdmi->regmap = devm_regmap_init_i2c(i2c, &adihdmi_regmap_config); + if (IS_ERR(adihdmi->regmap)) + { + pr_err("%s - %d - Bad reg map init\n", __FUNCTION__, __LINE__); + return PTR_ERR(adihdmi->regmap); + } + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_CHIP_REVISION, &val); + if (ret) + { + pr_err("%s - %d - Bad reg map read\n", __FUNCTION__, __LINE__); + return ret; + } + dev_dbg(dev, "Rev. %d\n", val); + + ret = regmap_register_patch(adihdmi->regmap, adihdmi_fixed_registers, + ARRAY_SIZE(adihdmi_fixed_registers)); + if (ret) + { + pr_err("%s - %d - Bad reg map patch\n", __FUNCTION__, __LINE__); + return ret; + } + + regmap_write(adihdmi->regmap, ADIHDMI_REG_EDID_I2C_ADDR, edid_i2c_addr); + regmap_write(adihdmi->regmap, ADIHDMI_REG_PACKET_I2C_ADDR, + packet_i2c_addr); + regmap_write(adihdmi->regmap, ADIHDMI_REG_CEC_I2C_ADDR, cec_i2c_addr); + adihdmi_packet_disable(adihdmi, 0xffff); + + adihdmi->i2c_main = i2c; + adihdmi->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1); + if (!adihdmi->i2c_edid) + { + pr_err("%s - %d - No mem for EDID\n", __FUNCTION__, __LINE__); + return -ENOMEM; + } + + if (i2c->irq) { + init_waitqueue_head(&adihdmi->wq); + + ret = devm_request_threaded_irq(dev, i2c->irq, NULL, + adihdmi_irq_handler, + IRQF_ONESHOT, dev_name(dev), + adihdmi); + if (ret) + { + pr_err("%s - %d - Bad IRQ thread request\n", __FUNCTION__, __LINE__); + goto err_i2c_unregister_device; + } + } + + /* CEC is unused for now */ + regmap_write(adihdmi->regmap, ADIHDMI_REG_CEC_CTRL, + ADIHDMI_CEC_CTRL_POWER_DOWN); + + adihdmi_power_off(adihdmi); + + adihdmi_set_link_config(adihdmi, &link_config); + + adihdmi_audio_setup(adihdmi); + + return 0; + +err_i2c_unregister_device: + i2c_unregister_device(adihdmi->i2c_edid); + + return ret; +} + +static void adihdmi_destroy(struct adihdmi *priv) +{ + i2c_unregister_device(priv->i2c_edid); +} + +/* ----------------------------------------------------------------------------- + * Encoder operations + */ + +static int adihdmi_encoder_get_modes(struct adihdmi *adihdmi, + struct drm_connector *connector) +{ + struct edid *edid; + unsigned int count; + + /* Reading the EDID only works if the device is powered */ + if (!adihdmi->powered) { + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(0), + ADIHDMI_INT0_EDID_READY); + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(1), + ADIHDMI_INT1_DDC_ERROR); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER, + ADIHDMI_POWER_POWER_DOWN, 0); + adihdmi->current_edid_segment = -1; + } + + edid = drm_do_get_edid(connector, adihdmi_get_edid_block, adihdmi); + + if (!adihdmi->powered) + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER, + ADIHDMI_POWER_POWER_DOWN, + ADIHDMI_POWER_POWER_DOWN); + + kfree(adihdmi->edid); + adihdmi->edid = edid; + if (!edid) + { + pr_err("%s - %d - No EDID\n", __FUNCTION__, __LINE__); + return 0; + } + + drm_mode_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + + adihdmi_set_config_csc(adihdmi, connector, adihdmi->rgb); + + return count; +} + +static void adihdmi_encoder_dpms(struct drm_encoder *encoder, int mode) +{ + struct adihdmi2 *priv2 = enc_to_adihdmi2(encoder); + + if (mode == DRM_MODE_DPMS_ON) + adihdmi_power_on(&priv2->base); + else + adihdmi_power_off(&priv2->base); +} + + static enum drm_connector_status +adihdmi_encoder_detect(struct adihdmi *adihdmi, + struct drm_connector *connector) +{ + enum drm_connector_status status; + unsigned int val; + bool hpd; + int ret; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_STATUS, &val); + if (ret < 0) + { + pr_err("%s - %d - Disconnected\n", __FUNCTION__, __LINE__); + return connector_status_disconnected; + } + + if (val & ADIHDMI_STATUS_HPD) + status = connector_status_connected; + else + status = connector_status_disconnected; + + hpd = adihdmi_hpd(adihdmi); + + /* The chip resets itself when the cable is disconnected, so in case + * there is a pending HPD interrupt and the cable is connected there was + * at least one transition from disconnected to connected and the chip + * has to be reinitialized. */ + if (status == connector_status_connected && hpd && adihdmi->powered) { + regcache_mark_dirty(adihdmi->regmap); + adihdmi_power_on(adihdmi); + adihdmi_encoder_get_modes(adihdmi, connector); + if (adihdmi->status == connector_status_connected) + status = connector_status_disconnected; + } else { + /* Renable HDP sensing */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER2, + ADIHDMI_REG_POWER2_HDP_SRC_MASK, + ADIHDMI_REG_POWER2_HDP_SRC_BOTH); + } + + adihdmi->status = status; + return status; +} + +static bool adihdmi_encoder_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static int adihdmi_encoder_mode_valid(struct drm_encoder *encoder, struct drm_display_mode *mode) +{ + return adihdmi_mode_valid(mode); +} + +static void adihdmi_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + unsigned int low_refresh_rate; + unsigned int hsync_polarity = 0; + unsigned int vsync_polarity = 0; + struct adihdmi *adihdmi = enc_to_adihdmi(encoder); + + if (adihdmi->embedded_sync) { + unsigned int hsync_offset, hsync_len; + unsigned int vsync_offset, vsync_len; + + hsync_offset = adj_mode->crtc_hsync_start - + adj_mode->crtc_hdisplay; + vsync_offset = adj_mode->crtc_vsync_start - + adj_mode->crtc_vdisplay; + hsync_len = adj_mode->crtc_hsync_end - + adj_mode->crtc_hsync_start; + vsync_len = adj_mode->crtc_vsync_end - + adj_mode->crtc_vsync_start; + + /* The hardware vsync generator has a off-by-one bug */ + vsync_offset += 1; + + regmap_write(adihdmi->regmap, ADIHDMI_REG_HSYNC_PLACEMENT_MSB, + ((hsync_offset >> 10) & 0x7) << 5); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(0), + (hsync_offset >> 2) & 0xff); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(1), + ((hsync_offset & 0x3) << 6) | + ((hsync_len >> 4) & 0x3f)); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(2), + ((hsync_len & 0xf) << 4) | + ((vsync_offset >> 6) & 0xf)); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(3), + ((vsync_offset & 0x3f) << 2) | + ((vsync_len >> 8) & 0x3)); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(4), + vsync_len & 0xff); + + hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC); + vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC); + } else { + enum adihdmi_sync_polarity mode_hsync_polarity; + enum adihdmi_sync_polarity mode_vsync_polarity; + + /** + * If the input signal is always low or always high we want to + * invert or let it passthrough depending on the polarity of the + * current mode. + **/ + if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC) + mode_hsync_polarity = ADIHDMI_SYNC_POLARITY_LOW; + else + mode_hsync_polarity = ADIHDMI_SYNC_POLARITY_HIGH; + + if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC) + mode_vsync_polarity = ADIHDMI_SYNC_POLARITY_LOW; + else + mode_vsync_polarity = ADIHDMI_SYNC_POLARITY_HIGH; + + if (adihdmi->hsync_polarity != mode_hsync_polarity && + adihdmi->hsync_polarity != + ADIHDMI_SYNC_POLARITY_PASSTHROUGH) + hsync_polarity = 1; + + if (adihdmi->vsync_polarity != mode_vsync_polarity && + adihdmi->vsync_polarity != + ADIHDMI_SYNC_POLARITY_PASSTHROUGH) + vsync_polarity = 1; + } + + if (mode->vrefresh <= 24000) + low_refresh_rate = ADIHDMI_LOW_REFRESH_RATE_24HZ; + else if (mode->vrefresh <= 25000) + low_refresh_rate = ADIHDMI_LOW_REFRESH_RATE_25HZ; + else if (mode->vrefresh <= 30000) + low_refresh_rate = ADIHDMI_LOW_REFRESH_RATE_30HZ; + else + low_refresh_rate = ADIHDMI_LOW_REFRESH_RATE_NONE; + + regmap_update_bits(adihdmi->regmap, 0xfb, + 0x6, low_refresh_rate << 1); + regmap_update_bits(adihdmi->regmap, 0x17, + 0x60, (vsync_polarity << 6) | (hsync_polarity << 5)); + + /* + * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is + * supposed to give better results. + */ + + adihdmi->f_tmds = mode->clock; +} + +static void adihdmi_encoder_prepare(struct drm_encoder *encoder) +{ + adihdmi_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); +} + +static void adihdmi_encoder_commit(struct drm_encoder *encoder) +{ + adihdmi_encoder_dpms(encoder, DRM_MODE_DPMS_ON); +} + +static struct drm_encoder_helper_funcs adihdmi_encoder_helper_funcs = { + .dpms = adihdmi_encoder_dpms, + .mode_fixup = adihdmi_encoder_mode_fixup, + .prepare = adihdmi_encoder_prepare, + .commit = adihdmi_encoder_commit, + .mode_set = adihdmi_encoder_mode_set, +}; + +static void adihdmi_encoder_destroy(struct drm_encoder *encoder) +{ + struct adihdmi2 *priv = enc_to_adihdmi2(encoder); + + adihdmi_destroy(&priv->base); + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs adihdmi_encoder_funcs = { + .destroy = adihdmi_encoder_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Slave operations + */ + +static int adihdmi_encoder_slave_create_resources(struct drm_encoder *encoder, struct drm_connector *connector) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); + return 0; +} + +static void adihdmi_encoder_slave_destroy(struct drm_encoder *encoder) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); +} + + static enum drm_connector_status +adihdmi_encoder_slave_detect(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + return adihdmi_encoder_detect(enc_to_adihdmi(encoder), + connector); +} + +static int adihdmi_encoder_slave_get_modes(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + return adihdmi_encoder_get_modes(enc_to_adihdmi(encoder), + connector); +} + + +static void adihdmi_encoder_slave_set_config(struct drm_encoder *encoder, void *params) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); +} + +static int adihdmi_encoder_set_property(struct drm_encoder *encoder, struct drm_connector *connector, struct drm_property *property, uint64_t val) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); + return 0; +} + +static struct drm_encoder_slave_funcs adihdmi_encoder_slave_funcs = { + .create_resources = adihdmi_encoder_slave_create_resources, + .destroy = adihdmi_encoder_slave_destroy, + .detect = adihdmi_encoder_slave_detect, + .dpms = adihdmi_encoder_dpms, + .get_modes = adihdmi_encoder_slave_get_modes, + .mode_fixup = adihdmi_encoder_mode_fixup, + .mode_set = adihdmi_encoder_mode_set, + .mode_valid = adihdmi_encoder_mode_valid, + .set_config = adihdmi_encoder_slave_set_config, + .set_property = adihdmi_encoder_set_property, +}; + +/* ----------------------------------------------------------------------------- + * Connector operations + */ + +static int adihdmi_connector_get_modes(struct drm_connector *connector) +{ + struct adihdmi2 *priv = conn_to_adihdmi2(connector); + + return adihdmi_encoder_get_modes(&priv->base, connector); +} + +static int adihdmi_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + return adihdmi_mode_valid(mode); +} + + static struct drm_encoder * +adihdmi_connector_best_encoder(struct drm_connector *connector) +{ + struct adihdmi2 *priv = conn_to_adihdmi2(connector); + + return &priv->encoder; +} + +static struct drm_connector_helper_funcs adihdmi_connector_helper_funcs = { + .get_modes = adihdmi_connector_get_modes, + .mode_valid = adihdmi_connector_mode_valid, + .best_encoder = adihdmi_connector_best_encoder, +}; + + static enum drm_connector_status +adihdmi_connector_detect(struct drm_connector *connector, bool force) +{ + struct adihdmi2 *priv = conn_to_adihdmi2(connector); + + return adihdmi_encoder_detect(&priv->base, connector); +} + +static void adihdmi_connector_destroy(struct drm_connector *connector) +{ + drm_connector_unregister(connector); + drm_connector_cleanup(connector); +} + +static struct drm_connector_funcs adihdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .fill_modes = drm_helper_probe_single_connector_modes, + .detect = adihdmi_connector_detect, + .destroy = adihdmi_connector_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Component operations + */ + +static int adihdmi_bind(struct device *dev, struct device *master, void *data) +{ + struct i2c_client *client = to_i2c_client(dev); + struct drm_device *drm = data; + struct adihdmi2 *priv; + uint32_t crtcs = 0; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + { + pr_err("%s - %d - No memory for ADIHDMI\n", __FUNCTION__, __LINE__); + return -ENOMEM; + } + + dev_set_drvdata(dev, priv); + + if (dev->of_node) + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); + + /* If no CRTCs were found, fall back to our old behaviour */ + if (crtcs == 0) { + dev_warn(dev, "Falling back to first CRTC\n"); + crtcs = 1 << 0; + } + + priv->base.encoder = &priv->encoder; + priv->connector.interlace_allowed = 1; + priv->encoder.possible_crtcs = crtcs; + + ret = adihdmi_create(client, &priv->base); + if (ret) + return ret; + + drm_encoder_helper_add(&priv->encoder, &adihdmi_encoder_helper_funcs); + ret = drm_encoder_init(drm, &priv->encoder, &adihdmi_encoder_funcs, + DRM_MODE_ENCODER_TMDS, NULL); + if (ret) + goto err_encoder; + + drm_connector_helper_add(&priv->connector, + &adihdmi_connector_helper_funcs); + ret = drm_connector_init(drm, &priv->connector, + &adihdmi_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); + if (ret) + goto err_connector; + + ret = drm_connector_register(&priv->connector); + if (ret) + goto err_sysfs; + + priv->connector.encoder = &priv->encoder; + drm_mode_connector_attach_encoder(&priv->connector, &priv->encoder); + + return 0; + +err_sysfs: + drm_connector_cleanup(&priv->connector); +err_connector: + drm_encoder_cleanup(&priv->encoder); +err_encoder: + adihdmi_destroy(&priv->base); + return ret; + + +} + +static void adihdmi_unbind(struct device *dev, struct device *master, void *data) +{ + struct adihdmi2 *priv = dev_get_drvdata(dev); + + drm_connector_cleanup(&priv->connector); + drm_encoder_cleanup(&priv->encoder); + adihdmi_destroy(&priv->base); +} + +static const struct component_ops adihdmi_ops = +{ + .bind = adihdmi_bind, + .unbind = adihdmi_unbind, +}; + +/* ----------------------------------------------------------------------------- + * Init operations + */ + +static int adihdmi_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + return component_add(&i2c->dev, &adihdmi_ops); +} + +static int adihdmi_remove(struct i2c_client *i2c) +{ + component_del(&i2c->dev, &adihdmi_ops); + + return 0; +} + +static int adihdmi_encoder_init(struct i2c_client *i2c, struct drm_device *dev, + struct drm_encoder_slave *encoder_slave) +{ + + struct adihdmi *adihdmi; + int ret; + + adihdmi = kzalloc(sizeof(*adihdmi), GFP_KERNEL); + if (!adihdmi) + return -ENOMEM; + + adihdmi->encoder = &encoder_slave->base; + + ret = adihdmi_create(i2c, adihdmi); + if (ret) { + kfree(adihdmi); + return ret; + } + + encoder_slave->slave_priv = adihdmi; + encoder_slave->slave_funcs = &adihdmi_encoder_slave_funcs; + + return 0; +} + +static const struct i2c_device_id adihdmi_i2c_ids[] = { + { "adv7511", 0 }, + { "adv7511w", 0 }, + { "adv7513", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adihdmi_i2c_ids); + +static const struct of_device_id adihdmi_of_ids[] = { + { .compatible = "adi,adv7511", }, + { .compatible = "adi,adv7511w", }, + { .compatible = "adi,adv7513", }, + { } +}; +MODULE_DEVICE_TABLE(of, adihdmi_of_ids); + +static struct drm_i2c_encoder_driver adihdmi_driver = { + .i2c_driver = { + .driver = { + .name = "adihdmi", + .of_match_table = adihdmi_of_ids, + }, + .id_table = adihdmi_i2c_ids, + .probe = adihdmi_probe, + .remove = adihdmi_remove, + }, + + .encoder_init = adihdmi_encoder_init, +}; + +static int __init adihdmi_init(void) +{ + return drm_i2c_encoder_register(THIS_MODULE, &adihdmi_driver); +} +module_init(adihdmi_init); + +static void __exit adihdmi_exit(void) +{ + drm_i2c_encoder_unregister(&adihdmi_driver); +} +module_exit(adihdmi_exit); + +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_DESCRIPTION("ADIHDMI HDMI transmitter driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 7d07733..a3aadad 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -21,25 +21,32 @@ #include "tilcdc_drv.h" #include "tilcdc_regs.h" +#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000 + struct tilcdc_crtc { struct drm_crtc base; const struct tilcdc_panel_info *info; - uint32_t dirty; - dma_addr_t start, end; struct drm_pending_vblank_event *event; int dpms; wait_queue_head_t frame_done_wq; bool frame_done; + spinlock_t irq_lock; - /* fb currently set to scanout 0/1: */ - struct drm_framebuffer *scanout[2]; + ktime_t last_vblank; + + struct drm_framebuffer *curr_fb; + struct drm_framebuffer *next_fb; /* for deferred fb unref's: */ struct drm_flip_work unref_work; /* Only set if an external encoder is connected */ bool simulate_vesa_sync; + + int sync_lost_count; + bool frame_intact; + struct work_struct recover_work; }; #define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base) @@ -54,101 +61,127 @@ static void unref_worker(struct drm_flip_work *work, void *val) mutex_unlock(&dev->mode_config.mutex); } -static void set_scanout(struct drm_crtc *crtc, int n) -{ - static const uint32_t base_reg[] = { - LCDC_DMA_FB_BASE_ADDR_0_REG, - LCDC_DMA_FB_BASE_ADDR_1_REG, - }; - static const uint32_t ceil_reg[] = { - LCDC_DMA_FB_CEILING_ADDR_0_REG, - LCDC_DMA_FB_CEILING_ADDR_1_REG, - }; - static const uint32_t stat[] = { - LCDC_END_OF_FRAME0, LCDC_END_OF_FRAME1, - }; - struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); - struct drm_device *dev = crtc->dev; - struct tilcdc_drm_private *priv = dev->dev_private; - - pm_runtime_get_sync(dev->dev); - tilcdc_write(dev, base_reg[n], tilcdc_crtc->start); - tilcdc_write(dev, ceil_reg[n], tilcdc_crtc->end); - if (tilcdc_crtc->scanout[n]) { - drm_flip_work_queue(&tilcdc_crtc->unref_work, tilcdc_crtc->scanout[n]); - drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq); - } - tilcdc_crtc->scanout[n] = crtc->primary->fb; - drm_framebuffer_reference(tilcdc_crtc->scanout[n]); - tilcdc_crtc->dirty &= ~stat[n]; - pm_runtime_put_sync(dev->dev); -} - -static void update_scanout(struct drm_crtc *crtc) +static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb) { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; - struct drm_framebuffer *fb = crtc->primary->fb; struct drm_gem_cma_object *gem; unsigned int depth, bpp; + dma_addr_t start, end; drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp); gem = drm_fb_cma_get_gem_obj(fb, 0); - tilcdc_crtc->start = gem->paddr + fb->offsets[0] + - (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8); + start = gem->paddr + fb->offsets[0] + + crtc->y * fb->pitches[0] + + crtc->x * bpp / 8; - tilcdc_crtc->end = tilcdc_crtc->start + - (crtc->mode.vdisplay * fb->pitches[0]); + end = start + (crtc->mode.vdisplay * fb->pitches[0]); - if (tilcdc_crtc->dpms == DRM_MODE_DPMS_ON) { - /* already enabled, so just mark the frames that need - * updating and they will be updated on vblank: - */ - tilcdc_crtc->dirty |= LCDC_END_OF_FRAME0 | LCDC_END_OF_FRAME1; - drm_vblank_get(dev, 0); - } else { - /* not enabled yet, so update registers immediately: */ - set_scanout(crtc, 0); - set_scanout(crtc, 1); - } + tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, start); + tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG, end); + + if (tilcdc_crtc->curr_fb) + drm_flip_work_queue(&tilcdc_crtc->unref_work, + tilcdc_crtc->curr_fb); + + tilcdc_crtc->curr_fb = fb; } -static void start(struct drm_crtc *crtc) +static void reset(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct tilcdc_drm_private *priv = dev->dev_private; - if (priv->rev == 2) { - tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); - msleep(1); - tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); - msleep(1); - } + if (priv->rev != 2) + return; + + tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); + usleep_range(250, 1000); + tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); +} + +static void start(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + + reset(crtc); - tilcdc_set(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); + tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY)); tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); } static void stop(struct drm_crtc *crtc) { + struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; + struct tilcdc_drm_private *priv = dev->dev_private; + tilcdc_crtc->frame_done = false; tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); + + /* + * if necessary wait for framedone irq which will still come + * before putting things to sleep.. + */ + if (priv->rev == 2) { + int ret = wait_event_timeout(tilcdc_crtc->frame_done_wq, + tilcdc_crtc->frame_done, + msecs_to_jiffies(50)); + if (ret == 0) + dev_err(dev->dev, "%s: timeout waiting for framedone\n", + __func__); + } +} + +static void tilcdc_crtc_recover_work(struct work_struct *work) +{ + struct tilcdc_crtc *tilcdc_crtc = + container_of(work, struct tilcdc_crtc, recover_work); + struct drm_crtc *crtc = &tilcdc_crtc->base; + struct drm_device *dev = crtc->dev; + + dev_info(crtc->dev->dev, "%s: Reset CRTC", __func__); + + drm_modeset_lock_crtc(crtc, NULL); + + if (tilcdc_crtc->dpms == DRM_MODE_DPMS_OFF) + goto out; + + tilcdc_crtc->frame_done = false; + stop(crtc); + tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_SYNC_LOST); + start(crtc); +out: + drm_modeset_unlock_crtc(crtc); } -static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode); static void tilcdc_crtc_destroy(struct drm_crtc *crtc) { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); + of_node_put(crtc->port); drm_crtc_cleanup(crtc); drm_flip_work_cleanup(&tilcdc_crtc->unref_work); +} + +static int tilcdc_verify_fb(struct drm_crtc *crtc, struct drm_framebuffer *fb) +{ + struct drm_device *dev = crtc->dev; + unsigned int depth, bpp; - kfree(tilcdc_crtc); + drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp); + + if (fb->pitches[0] != crtc->mode.hdisplay * bpp / 8) { + dev_err(dev->dev, + "Invalid pitch: fb and crtc widths must be the same"); + return -EINVAL; + } + + return 0; } static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, @@ -158,20 +191,48 @@ static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; + int r; + unsigned long flags; + s64 tdiff; + ktime_t next_vblank; + + r = tilcdc_verify_fb(crtc, fb); + if (r) + return r; if (tilcdc_crtc->event) { dev_err(dev->dev, "already pending page flip!\n"); return -EBUSY; } + drm_framebuffer_reference(fb); + crtc->primary->fb = fb; + + pm_runtime_get_sync(dev->dev); + + spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags); + + next_vblank = ktime_add_us(tilcdc_crtc->last_vblank, + 1000000 / crtc->hwmode.vrefresh); + + tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get())); + + if (tdiff >= TILCDC_VBLANK_SAFETY_THRESHOLD_US) + set_scanout(crtc, fb); + else + tilcdc_crtc->next_fb = fb; + tilcdc_crtc->event = event; - update_scanout(crtc); + + spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags); + + pm_runtime_put_sync(dev->dev); return 0; } -static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) +void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; @@ -186,31 +247,27 @@ static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) tilcdc_crtc->dpms = mode; - pm_runtime_get_sync(dev->dev); - if (mode == DRM_MODE_DPMS_ON) { - pm_runtime_forbid(dev->dev); + pm_runtime_get_sync(dev->dev); start(crtc); } else { - tilcdc_crtc->frame_done = false; stop(crtc); + pm_runtime_put_sync(dev->dev); - /* - * if necessary wait for framedone irq which will still come - * before putting things to sleep.. - */ - if (priv->rev == 2) { - int ret = wait_event_timeout( - tilcdc_crtc->frame_done_wq, - tilcdc_crtc->frame_done, - msecs_to_jiffies(50)); - if (ret == 0) - dev_err(dev->dev, "timeout waiting for framedone\n"); + if (tilcdc_crtc->next_fb) { + drm_flip_work_queue(&tilcdc_crtc->unref_work, + tilcdc_crtc->next_fb); + tilcdc_crtc->next_fb = NULL; } - pm_runtime_allow(dev->dev); - } - pm_runtime_put_sync(dev->dev); + if (tilcdc_crtc->curr_fb) { + drm_flip_work_queue(&tilcdc_crtc->unref_work, + tilcdc_crtc->curr_fb); + tilcdc_crtc->curr_fb = NULL; + } + + drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq); + } } static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc, @@ -272,6 +329,10 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, if (WARN_ON(!info)) return -EINVAL; + ret = tilcdc_verify_fb(crtc, crtc->primary->fb); + if (ret) + return ret; + pm_runtime_get_sync(dev->dev); /* Configure the Burst Size and fifo threshold of DMA: */ @@ -419,8 +480,10 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, else tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); + drm_framebuffer_reference(crtc->primary->fb); + + set_scanout(crtc, crtc->primary->fb); - update_scanout(crtc); tilcdc_crtc_update_clk(crtc); pm_runtime_put_sync(dev->dev); @@ -431,7 +494,21 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { - update_scanout(crtc); + struct drm_device *dev = crtc->dev; + int r; + + r = tilcdc_verify_fb(crtc, crtc->primary->fb); + if (r) + return r; + + drm_framebuffer_reference(crtc->primary->fb); + + pm_runtime_get_sync(dev->dev); + + set_scanout(crtc, crtc->primary->fb); + + pm_runtime_put_sync(dev->dev); + return 0; } @@ -573,7 +650,8 @@ void tilcdc_crtc_update_clk(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct tilcdc_drm_private *priv = dev->dev_private; int dpms = tilcdc_crtc->dpms; - unsigned int lcd_clk, div; + unsigned long lcd_clk; + const unsigned clkdiv = 2; /* using a fixed divider of 2 */ int ret; pm_runtime_get_sync(dev->dev); @@ -581,22 +659,21 @@ void tilcdc_crtc_update_clk(struct drm_crtc *crtc) if (dpms == DRM_MODE_DPMS_ON) tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); - /* in raster mode, minimum divisor is 2: */ - ret = clk_set_rate(priv->disp_clk, crtc->mode.clock * 1000 * 2); - if (ret) { + /* mode.clock is in KHz, set_rate wants parameter in Hz */ + ret = clk_set_rate(priv->clk, crtc->mode.clock * 1000 * clkdiv); + if (ret < 0) { dev_err(dev->dev, "failed to set display clock rate to: %d\n", crtc->mode.clock); goto out; } lcd_clk = clk_get_rate(priv->clk); - div = lcd_clk / (crtc->mode.clock * 1000); - DBG("lcd_clk=%u, mode clock=%d, div=%u", lcd_clk, crtc->mode.clock, div); - DBG("fck=%lu, dpll_disp_ck=%lu", clk_get_rate(priv->clk), clk_get_rate(priv->disp_clk)); + DBG("lcd_clk=%lu, mode clock=%d, div=%u", + lcd_clk, crtc->mode.clock, clkdiv); /* Configure the LCD clock divisor. */ - tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(div) | + tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) | LCDC_RASTER_MODE); if (priv->rev == 2) @@ -611,54 +688,93 @@ out: pm_runtime_put_sync(dev->dev); } +#define SYNC_LOST_COUNT_LIMIT 50 + irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; struct tilcdc_drm_private *priv = dev->dev_private; - uint32_t stat = tilcdc_read_irqstatus(dev); + uint32_t stat; - if ((stat & LCDC_SYNC_LOST) && (stat & LCDC_FIFO_UNDERFLOW)) { - stop(crtc); - dev_err(dev->dev, "error: %08x\n", stat); - tilcdc_clear_irqstatus(dev, stat); - start(crtc); - } else if (stat & LCDC_PL_LOAD_DONE) { - tilcdc_clear_irqstatus(dev, stat); - } else { - struct drm_pending_vblank_event *event; + stat = tilcdc_read_irqstatus(dev); + tilcdc_clear_irqstatus(dev, stat); + + if (stat & LCDC_END_OF_FRAME0) { unsigned long flags; - uint32_t dirty = tilcdc_crtc->dirty & stat; + bool skip_event = false; + ktime_t now; + + now = ktime_get(); + + drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq); + + spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags); - tilcdc_clear_irqstatus(dev, stat); + tilcdc_crtc->last_vblank = now; - if (dirty & LCDC_END_OF_FRAME0) - set_scanout(crtc, 0); + if (tilcdc_crtc->next_fb) { + set_scanout(crtc, tilcdc_crtc->next_fb); + tilcdc_crtc->next_fb = NULL; + skip_event = true; + } - if (dirty & LCDC_END_OF_FRAME1) - set_scanout(crtc, 1); + spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags); drm_handle_vblank(dev, 0); - spin_lock_irqsave(&dev->event_lock, flags); - event = tilcdc_crtc->event; - tilcdc_crtc->event = NULL; - if (event) - drm_send_vblank_event(dev, 0, event); - spin_unlock_irqrestore(&dev->event_lock, flags); + if (!skip_event) { + struct drm_pending_vblank_event *event; + + spin_lock_irqsave(&dev->event_lock, flags); + + event = tilcdc_crtc->event; + tilcdc_crtc->event = NULL; + if (event) + drm_send_vblank_event(dev, 0, event); + + spin_unlock_irqrestore(&dev->event_lock, flags); + } - if (dirty && !tilcdc_crtc->dirty) - drm_vblank_put(dev, 0); + if (tilcdc_crtc->frame_intact) + tilcdc_crtc->sync_lost_count = 0; + else + tilcdc_crtc->frame_intact = true; } - if (priv->rev == 2) { - if (stat & LCDC_FRAME_DONE) { - tilcdc_crtc->frame_done = true; - wake_up(&tilcdc_crtc->frame_done_wq); + if (priv->rev == 1) + return IRQ_HANDLED; + /* The rest is for revision 2 only */ + + if (stat & LCDC_FRAME_DONE) { + tilcdc_crtc->frame_done = true; + wake_up(&tilcdc_crtc->frame_done_wq); + } + + if (stat & LCDC_FIFO_UNDERFLOW) + dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow", + __func__, stat); + + if (stat & LCDC_SYNC_LOST) { + dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost", + __func__, stat); + tilcdc_crtc->frame_intact = false; + if (tilcdc_crtc->sync_lost_count++ > SYNC_LOST_COUNT_LIMIT) { + dev_err(dev->dev, + "%s(0x%08x): Sync lost flood detected, recovering", + __func__, stat); + queue_work(system_wq, &tilcdc_crtc->recover_work); + tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, + LCDC_SYNC_LOST); + tilcdc_crtc->sync_lost_count = 0; } - tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0); } + /* Indicate to LCDC that the interrupt service routine has + * completed, see 13.3.6.1.6 in AM335x TRM. + */ + tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0); + return IRQ_HANDLED; } @@ -684,11 +800,12 @@ void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev) { + struct tilcdc_drm_private *priv = dev->dev_private; struct tilcdc_crtc *tilcdc_crtc; struct drm_crtc *crtc; int ret; - tilcdc_crtc = kzalloc(sizeof(*tilcdc_crtc), GFP_KERNEL); + tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL); if (!tilcdc_crtc) { dev_err(dev->dev, "allocation failed\n"); return NULL; @@ -702,12 +819,33 @@ struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev) drm_flip_work_init(&tilcdc_crtc->unref_work, "unref", unref_worker); + spin_lock_init(&tilcdc_crtc->irq_lock); + INIT_WORK(&tilcdc_crtc->recover_work, tilcdc_crtc_recover_work); + ret = drm_crtc_init(dev, crtc, &tilcdc_crtc_funcs); if (ret < 0) goto fail; drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs); + if (priv->is_componentized) { + struct device_node *ports = + of_get_child_by_name(dev->dev->of_node, "ports"); + + if (ports) { + crtc->port = of_get_child_by_name(ports, "port"); + of_node_put(ports); + } else { + crtc->port = + of_get_child_by_name(dev->dev->of_node, "port"); + } + if (!crtc->port) { /* This should never happen */ + dev_err(dev->dev, "Port node not found in %s\n", + dev->dev->of_node->full_name); + goto fail; + } + } + return crtc; fail: diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index d7f5b89..a964135 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -18,6 +18,8 @@ /* LCDC DRM driver, based on da8xx-fb */ #include +#include +#include #include "tilcdc_drv.h" #include "tilcdc_regs.h" @@ -110,6 +112,8 @@ static int tilcdc_unload(struct drm_device *dev) { struct tilcdc_drm_private *priv = dev->dev_private; + tilcdc_crtc_dpms(priv->crtc, DRM_MODE_DPMS_OFF); + tilcdc_remove_external_encoders(dev); drm_fbdev_cma_fini(priv->fbdev); @@ -139,11 +143,11 @@ static int tilcdc_unload(struct drm_device *dev) pm_runtime_disable(dev->dev); - kfree(priv); - return 0; } +static size_t tilcdc_num_regs(void); + static int tilcdc_load(struct drm_device *dev, unsigned long flags) { struct platform_device *pdev = dev->platformdev; @@ -154,8 +158,12 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) u32 bpp = 0; int ret; - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { + priv = devm_kzalloc(dev->dev, sizeof(*priv), GFP_KERNEL); + if (priv) + priv->saved_register = + devm_kcalloc(dev->dev, tilcdc_num_regs(), + sizeof(*priv->saved_register), GFP_KERNEL); + if (!priv || !priv->saved_register) { dev_err(dev->dev, "failed to allocate private data\n"); return -ENOMEM; } @@ -168,7 +176,7 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) priv->wq = alloc_ordered_workqueue("tilcdc", 0); if (!priv->wq) { ret = -ENOMEM; - goto fail_free_priv; + goto fail_unset_priv; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -192,13 +200,6 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) goto fail_iounmap; } - priv->disp_clk = clk_get(dev->dev, "dpll_disp_ck"); - if (IS_ERR(priv->clk)) { - dev_err(dev->dev, "failed to get display clock\n"); - ret = -ENODEV; - goto fail_put_clk; - } - #ifdef CONFIG_CPU_FREQ priv->lcd_fck_rate = clk_get_rate(priv->clk); priv->freq_transition.notifier_call = cpufreq_transition; @@ -206,7 +207,7 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) CPUFREQ_TRANSITION_NOTIFIER); if (ret) { dev_err(dev->dev, "failed to register cpufreq notifier\n"); - goto fail_put_disp_clk; + goto fail_put_clk; } #endif @@ -227,7 +228,6 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock); pm_runtime_enable(dev->dev); - pm_runtime_irq_safe(dev->dev); /* Determine LCD IP Version */ pm_runtime_get_sync(dev->dev); @@ -330,11 +330,9 @@ fail_cpufreq_unregister: #ifdef CONFIG_CPU_FREQ cpufreq_unregister_notifier(&priv->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); -fail_put_disp_clk: - clk_put(priv->disp_clk); -#endif fail_put_clk: +#endif clk_put(priv->clk); fail_iounmap: @@ -344,9 +342,9 @@ fail_free_wq: flush_workqueue(priv->wq); destroy_workqueue(priv->wq); -fail_free_priv: +fail_unset_priv: dev->dev_private = NULL; - kfree(priv); + return ret; } @@ -380,10 +378,14 @@ static int tilcdc_irq_postinstall(struct drm_device *dev) struct tilcdc_drm_private *priv = dev->dev_private; /* enable FIFO underflow irq: */ - if (priv->rev == 1) + if (priv->rev == 1) { tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_UNDERFLOW_INT_ENA); - else - tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_UNDERFLOW_INT_ENA); + } else { + tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, + LCDC_V2_UNDERFLOW_INT_ENA | + LCDC_V2_END_OF_FRAME0_INT_ENA | + LCDC_FRAME_DONE | LCDC_SYNC_LOST); + } return 0; } @@ -398,43 +400,21 @@ static void tilcdc_irq_uninstall(struct drm_device *dev) LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA); tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_V1_END_OF_FRAME_INT_ENA); } else { - tilcdc_clear(dev, LCDC_INT_ENABLE_SET_REG, + tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA | - LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_V2_END_OF_FRAME1_INT_ENA | - LCDC_FRAME_DONE); - } - -} - -static void enable_vblank(struct drm_device *dev, bool enable) -{ - struct tilcdc_drm_private *priv = dev->dev_private; - u32 reg, mask; - - if (priv->rev == 1) { - reg = LCDC_DMA_CTRL_REG; - mask = LCDC_V1_END_OF_FRAME_INT_ENA; - } else { - reg = LCDC_INT_ENABLE_SET_REG; - mask = LCDC_V2_END_OF_FRAME0_INT_ENA | - LCDC_V2_END_OF_FRAME1_INT_ENA | LCDC_FRAME_DONE; + LCDC_V2_END_OF_FRAME0_INT_ENA | + LCDC_FRAME_DONE | LCDC_SYNC_LOST); } - - if (enable) - tilcdc_set(dev, reg, mask); - else - tilcdc_clear(dev, reg, mask); } static int tilcdc_enable_vblank(struct drm_device *dev, unsigned int pipe) { - enable_vblank(dev, true); return 0; } static void tilcdc_disable_vblank(struct drm_device *dev, unsigned int pipe) { - enable_vblank(dev, false); + return; } #if defined(CONFIG_DEBUG_FS) || defined(CONFIG_PM_SLEEP) @@ -461,13 +441,22 @@ static const struct { /* new in revision 2: */ REG(2, false, LCDC_RAW_STAT_REG), REG(2, false, LCDC_MASKED_STAT_REG), - REG(2, false, LCDC_INT_ENABLE_SET_REG), + REG(2, true, LCDC_INT_ENABLE_SET_REG), REG(2, false, LCDC_INT_ENABLE_CLR_REG), REG(2, false, LCDC_END_OF_INT_IND_REG), REG(2, true, LCDC_CLK_ENABLE_REG), - REG(2, true, LCDC_INT_ENABLE_SET_REG), #undef REG }; + +static size_t tilcdc_num_regs(void) +{ + return ARRAY_SIZE(registers); +} +#else +static size_t tilcdc_num_regs(void) +{ + return 0; +} #endif #ifdef CONFIG_DEBUG_FS @@ -554,7 +543,8 @@ static const struct file_operations fops = { }; static struct drm_driver tilcdc_driver = { - .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET, + .driver_features = (DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET | + DRIVER_PRIME), .load = tilcdc_load, .unload = tilcdc_unload, .preclose = tilcdc_preclose, @@ -572,6 +562,16 @@ static struct drm_driver tilcdc_driver = { .dumb_create = drm_gem_cma_dumb_create, .dumb_map_offset = drm_gem_cma_dumb_map_offset, .dumb_destroy = drm_gem_dumb_destroy, + + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_import = drm_gem_prime_import, + .gem_prime_export = drm_gem_prime_export, + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, + .gem_prime_vmap = drm_gem_cma_prime_vmap, + .gem_prime_vunmap = drm_gem_cma_prime_vunmap, + .gem_prime_mmap = drm_gem_cma_prime_mmap, #ifdef CONFIG_DEBUG_FS .debugfs_init = tilcdc_debugfs_init, .debugfs_cleanup = tilcdc_debugfs_cleanup, @@ -597,11 +597,24 @@ static int tilcdc_pm_suspend(struct device *dev) drm_kms_helper_poll_disable(ddev); + /* Select sleep pin state */ + pinctrl_pm_select_sleep_state(dev); + + if (pm_runtime_suspended(dev)) { + priv->ctx_valid = false; + return 0; + } + + /* Disable the LCDC controller, to avoid locking up the PRCM */ + tilcdc_crtc_dpms(priv->crtc, DRM_MODE_DPMS_OFF); + /* Save register state: */ for (i = 0; i < ARRAY_SIZE(registers); i++) if (registers[i].save && (priv->rev >= registers[i].rev)) priv->saved_register[n++] = tilcdc_read(ddev, registers[i].reg); + priv->ctx_valid = true; + return 0; } @@ -611,10 +624,17 @@ static int tilcdc_pm_resume(struct device *dev) struct tilcdc_drm_private *priv = ddev->dev_private; unsigned i, n = 0; - /* Restore register state: */ - for (i = 0; i < ARRAY_SIZE(registers); i++) - if (registers[i].save && (priv->rev >= registers[i].rev)) - tilcdc_write(ddev, registers[i].reg, priv->saved_register[n++]); + /* Select default pin state */ + pinctrl_pm_select_default_state(dev); + + if (priv->ctx_valid == true) { + /* Restore register state: */ + for (i = 0; i < ARRAY_SIZE(registers); i++) + if (registers[i].save && + (priv->rev >= registers[i].rev)) + tilcdc_write(ddev, registers[i].reg, + priv->saved_register[n++]); + } drm_kms_helper_poll_enable(ddev); diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h index e863ad0..80badad 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h @@ -49,7 +49,6 @@ struct tilcdc_drm_private { void __iomem *mmio; - struct clk *disp_clk; /* display dpll */ struct clk *clk; /* functional clock */ int rev; /* IP revision */ @@ -67,7 +66,8 @@ struct tilcdc_drm_private { uint32_t max_width; /* register contents saved across suspend/resume: */ - u32 saved_register[12]; + u32 *saved_register; + bool ctx_valid; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; @@ -172,5 +172,6 @@ void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc, bool simulate_vesa_sync); int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode); int tilcdc_crtc_max_width(struct drm_crtc *crtc); +void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode); #endif /* __TILCDC_DRV_H__ */ diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c index 4dda6e2..cd19dc8 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c @@ -45,14 +45,6 @@ struct panel_encoder { }; #define to_panel_encoder(x) container_of(x, struct panel_encoder, base) - -static void panel_encoder_destroy(struct drm_encoder *encoder) -{ - struct panel_encoder *panel_encoder = to_panel_encoder(encoder); - drm_encoder_cleanup(encoder); - kfree(panel_encoder); -} - static void panel_encoder_dpms(struct drm_encoder *encoder, int mode) { struct panel_encoder *panel_encoder = to_panel_encoder(encoder); @@ -98,7 +90,7 @@ static void panel_encoder_mode_set(struct drm_encoder *encoder, } static const struct drm_encoder_funcs panel_encoder_funcs = { - .destroy = panel_encoder_destroy, + .destroy = drm_encoder_cleanup, }; static const struct drm_encoder_helper_funcs panel_encoder_helper_funcs = { @@ -116,7 +108,8 @@ static struct drm_encoder *panel_encoder_create(struct drm_device *dev, struct drm_encoder *encoder; int ret; - panel_encoder = kzalloc(sizeof(*panel_encoder), GFP_KERNEL); + panel_encoder = devm_kzalloc(dev->dev, sizeof(*panel_encoder), + GFP_KERNEL); if (!panel_encoder) { dev_err(dev->dev, "allocation failed\n"); return NULL; @@ -137,7 +130,7 @@ static struct drm_encoder *panel_encoder_create(struct drm_device *dev, return encoder; fail: - panel_encoder_destroy(encoder); + drm_encoder_cleanup(encoder); return NULL; } @@ -156,10 +149,8 @@ struct panel_connector { static void panel_connector_destroy(struct drm_connector *connector) { - struct panel_connector *panel_connector = to_panel_connector(connector); drm_connector_unregister(connector); drm_connector_cleanup(connector); - kfree(panel_connector); } static enum drm_connector_status panel_connector_detect( @@ -232,7 +223,8 @@ static struct drm_connector *panel_connector_create(struct drm_device *dev, struct drm_connector *connector; int ret; - panel_connector = kzalloc(sizeof(*panel_connector), GFP_KERNEL); + panel_connector = devm_kzalloc(dev->dev, sizeof(*panel_connector), + GFP_KERNEL); if (!panel_connector) { dev_err(dev->dev, "allocation failed\n"); return NULL; diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c index 5052a8a..f83579f 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c @@ -54,14 +54,6 @@ struct tfp410_encoder { }; #define to_tfp410_encoder(x) container_of(x, struct tfp410_encoder, base) - -static void tfp410_encoder_destroy(struct drm_encoder *encoder) -{ - struct tfp410_encoder *tfp410_encoder = to_tfp410_encoder(encoder); - drm_encoder_cleanup(encoder); - kfree(tfp410_encoder); -} - static void tfp410_encoder_dpms(struct drm_encoder *encoder, int mode) { struct tfp410_encoder *tfp410_encoder = to_tfp410_encoder(encoder); @@ -107,7 +99,7 @@ static void tfp410_encoder_mode_set(struct drm_encoder *encoder, } static const struct drm_encoder_funcs tfp410_encoder_funcs = { - .destroy = tfp410_encoder_destroy, + .destroy = drm_encoder_cleanup, }; static const struct drm_encoder_helper_funcs tfp410_encoder_helper_funcs = { @@ -125,7 +117,8 @@ static struct drm_encoder *tfp410_encoder_create(struct drm_device *dev, struct drm_encoder *encoder; int ret; - tfp410_encoder = kzalloc(sizeof(*tfp410_encoder), GFP_KERNEL); + tfp410_encoder = devm_kzalloc(dev->dev, sizeof(*tfp410_encoder), + GFP_KERNEL); if (!tfp410_encoder) { dev_err(dev->dev, "allocation failed\n"); return NULL; @@ -147,7 +140,7 @@ static struct drm_encoder *tfp410_encoder_create(struct drm_device *dev, return encoder; fail: - tfp410_encoder_destroy(encoder); + drm_encoder_cleanup(encoder); return NULL; } @@ -166,10 +159,8 @@ struct tfp410_connector { static void tfp410_connector_destroy(struct drm_connector *connector) { - struct tfp410_connector *tfp410_connector = to_tfp410_connector(connector); drm_connector_unregister(connector); drm_connector_cleanup(connector); - kfree(tfp410_connector); } static enum drm_connector_status tfp410_connector_detect( @@ -237,7 +228,8 @@ static struct drm_connector *tfp410_connector_create(struct drm_device *dev, struct drm_connector *connector; int ret; - tfp410_connector = kzalloc(sizeof(*tfp410_connector), GFP_KERNEL); + tfp410_connector = devm_kzalloc(dev->dev, sizeof(*tfp410_connector), + GFP_KERNEL); if (!tfp410_connector) { dev_err(dev->dev, "allocation failed\n"); return NULL; @@ -322,7 +314,7 @@ static int tfp410_probe(struct platform_device *pdev) return -ENXIO; } - tfp410_mod = kzalloc(sizeof(*tfp410_mod), GFP_KERNEL); + tfp410_mod = devm_kzalloc(&pdev->dev, sizeof(*tfp410_mod), GFP_KERNEL); if (!tfp410_mod) return -ENOMEM; @@ -375,7 +367,6 @@ fail_adapter: i2c_put_adapter(tfp410_mod->i2c); fail: - kfree(tfp410_mod); tilcdc_module_cleanup(mod); return ret; } @@ -389,7 +380,6 @@ static int tfp410_remove(struct platform_device *pdev) gpio_free(tfp410_mod->gpio); tilcdc_module_cleanup(mod); - kfree(tfp410_mod); return 0; } diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 833ea9d..b0d3ecf 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -143,7 +143,7 @@ config MMA8452 select IIO_TRIGGERED_BUFFER help Say yes here to build support for the following Freescale 3-axis - accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. + accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. To compile this driver as a module, choose M here: the module will be called mma8452. diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index ccc632a..7f4994f 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1,6 +1,7 @@ /* * mma8452.c - Support for following Freescale 3-axis accelerometers: * + * MMA8451Q (14 bit) * MMA8452Q (12 bit) * MMA8453Q (10 bit) * MMA8652FC (12 bit) @@ -15,7 +16,7 @@ * * 7-bit I2C slave address 0x1c/0x1d (pin selectable) * - * TODO: orientation / freefall events, autosleep + * TODO: orientation events, autosleep */ #include @@ -85,8 +86,9 @@ #define MMA8452_INT_FF_MT BIT(2) #define MMA8452_INT_TRANS BIT(5) -#define MMA8452_DEVICE_ID 0x2a -#define MMA8453_DEVICE_ID 0x3a +#define MMA8451_DEVICE_ID 0x1a +#define MMA8452_DEVICE_ID 0x2a +#define MMA8453_DEVICE_ID 0x3a #define MMA8652_DEVICE_ID 0x4a #define MMA8653_DEVICE_ID 0x5a @@ -416,6 +418,51 @@ fail: return ret; } +/* returns >0 if in freefall mode, 0 if not or <0 if an error occured */ +static int mma8452_freefall_mode_enabled(struct mma8452_data *data) +{ + int val; + const struct mma_chip_info *chip = data->chip_info; + + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + return !(val & MMA8452_FF_MT_CFG_OAE); +} + +static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state) +{ + int val; + const struct mma_chip_info *chip = data->chip_info; + + if ((state && mma8452_freefall_mode_enabled(data)) || + (!state && !(mma8452_freefall_mode_enabled(data)))) + return 0; + + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + if (state) { + val |= BIT(idx_x + chip->ev_cfg_chan_shift); + val |= BIT(idx_y + chip->ev_cfg_chan_shift); + val |= BIT(idx_z + chip->ev_cfg_chan_shift); + val &= ~MMA8452_FF_MT_CFG_OAE; + } else { + val &= ~BIT(idx_x + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_y + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_z + chip->ev_cfg_chan_shift); + val |= MMA8452_FF_MT_CFG_OAE; + } + + val = mma8452_change_config(data, chip->ev_cfg, val); + if (val) + return val; + + return 0; +} + static int mma8452_set_hp_filter_frequency(struct mma8452_data *data, int val, int val2) { @@ -609,12 +656,22 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev, const struct mma_chip_info *chip = data->chip_info; int ret; - ret = i2c_smbus_read_byte_data(data->client, - data->chip_info->ev_cfg); - if (ret < 0) - return ret; + switch (dir) { + case IIO_EV_DIR_FALLING: + return mma8452_freefall_mode_enabled(data); + case IIO_EV_DIR_RISING: + if (mma8452_freefall_mode_enabled(data)) + return 0; + + ret = i2c_smbus_read_byte_data(data->client, + data->chip_info->ev_cfg); + if (ret < 0) + return ret; - return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift)); + return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift)); + default: + return -EINVAL; + } } static int mma8452_write_event_config(struct iio_dev *indio_dev, @@ -627,19 +684,35 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev, const struct mma_chip_info *chip = data->chip_info; int val; - val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); - if (val < 0) - return val; + switch (dir) { + case IIO_EV_DIR_FALLING: + return mma8452_set_freefall_mode(data, state); + case IIO_EV_DIR_RISING: + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + if (state) { + if (mma8452_freefall_mode_enabled(data)) { + val &= ~BIT(idx_x + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_y + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_z + chip->ev_cfg_chan_shift); + val |= MMA8452_FF_MT_CFG_OAE; + } + val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift); + } else { + if (mma8452_freefall_mode_enabled(data)) + return 0; - if (state) - val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift); - else - val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift); + val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift); + } - val |= chip->ev_cfg_ele; - val |= MMA8452_FF_MT_CFG_OAE; + val |= chip->ev_cfg_ele; - return mma8452_change_config(data, chip->ev_cfg, val); + return mma8452_change_config(data, chip->ev_cfg, val); + default: + return -EINVAL; + } } static void mma8452_transient_interrupt(struct iio_dev *indio_dev) @@ -652,6 +725,16 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev) if (src < 0) return; + if (mma8452_freefall_mode_enabled(data)) { + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_AND_Y_AND_Z, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_FALLING), + ts); + return; + } + if (src & data->chip_info->ev_src_xe) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, @@ -745,6 +828,27 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, return 0; } +static const struct iio_event_spec mma8452_freefall_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) | + BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB) + }, +}; + +static const struct iio_event_spec mma8652_freefall_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) + }, +}; + static const struct iio_event_spec mma8452_transient_event[] = { { .type = IIO_EV_TYPE_MAG, @@ -781,6 +885,24 @@ static struct attribute_group mma8452_event_attribute_group = { .attrs = mma8452_event_attributes, }; +#define MMA8452_FREEFALL_CHANNEL(modifier) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = modifier, \ + .scan_index = -1, \ + .event_spec = mma8452_freefall_event, \ + .num_event_specs = ARRAY_SIZE(mma8452_freefall_event), \ +} + +#define MMA8652_FREEFALL_CHANNEL(modifier) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = modifier, \ + .scan_index = -1, \ + .event_spec = mma8652_freefall_event, \ + .num_event_specs = ARRAY_SIZE(mma8652_freefall_event), \ +} + #define MMA8452_CHANNEL(axis, idx, bits) { \ .type = IIO_ACCEL, \ .modified = 1, \ @@ -822,11 +944,20 @@ static struct attribute_group mma8452_event_attribute_group = { .num_event_specs = ARRAY_SIZE(mma8452_motion_event), \ } +static const struct iio_chan_spec mma8451_channels[] = { + MMA8452_CHANNEL(X, idx_x, 14), + MMA8452_CHANNEL(Y, idx_y, 14), + MMA8452_CHANNEL(Z, idx_z, 14), + IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), +}; + static const struct iio_chan_spec mma8452_channels[] = { MMA8452_CHANNEL(X, idx_x, 12), MMA8452_CHANNEL(Y, idx_y, 12), MMA8452_CHANNEL(Z, idx_z, 12), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8453_channels[] = { @@ -834,6 +965,7 @@ static const struct iio_chan_spec mma8453_channels[] = { MMA8452_CHANNEL(Y, idx_y, 10), MMA8452_CHANNEL(Z, idx_z, 10), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8652_channels[] = { @@ -841,6 +973,7 @@ static const struct iio_chan_spec mma8652_channels[] = { MMA8652_CHANNEL(Y, idx_y, 12), MMA8652_CHANNEL(Z, idx_z, 12), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8653_channels[] = { @@ -848,9 +981,11 @@ static const struct iio_chan_spec mma8653_channels[] = { MMA8652_CHANNEL(Y, idx_y, 10), MMA8652_CHANNEL(Z, idx_z, 10), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; enum { + mma8451, mma8452, mma8453, mma8652, @@ -858,17 +993,34 @@ enum { }; static const struct mma_chip_info mma_chip_info_table[] = { - [mma8452] = { - .chip_id = MMA8452_DEVICE_ID, - .channels = mma8452_channels, - .num_channels = ARRAY_SIZE(mma8452_channels), + [mma8451] = { + .chip_id = MMA8451_DEVICE_ID, + .channels = mma8451_channels, + .num_channels = ARRAY_SIZE(mma8451_channels), /* * Hardware has fullscale of -2G, -4G, -8G corresponding to - * raw value -2048 for 12 bit or -512 for 10 bit. + * raw value -8192 for 14 bit, -2048 for 12 bit or -512 for 10 + * bit. * The userspace interface uses m/s^2 and we declare micro units * So scale factor for 12 bit here is given by: - * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 + * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 */ + .mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} }, + .ev_cfg = MMA8452_TRANSIENT_CFG, + .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, + .ev_cfg_chan_shift = 1, + .ev_src = MMA8452_TRANSIENT_SRC, + .ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE, + .ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE, + .ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE, + .ev_ths = MMA8452_TRANSIENT_THS, + .ev_ths_mask = MMA8452_TRANSIENT_THS_MASK, + .ev_count = MMA8452_TRANSIENT_COUNT, + }, + [mma8452] = { + .chip_id = MMA8452_DEVICE_ID, + .channels = mma8452_channels, + .num_channels = ARRAY_SIZE(mma8452_channels), .mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} }, .ev_cfg = MMA8452_TRANSIENT_CFG, .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, @@ -1049,6 +1201,7 @@ static int mma8452_reset(struct i2c_client *client) } static const struct of_device_id mma8452_dt_ids[] = { + { .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] }, { .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] }, { .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] }, { .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] }, @@ -1085,6 +1238,7 @@ static int mma8452_probe(struct i2c_client *client, return ret; switch (ret) { + case MMA8451_DEVICE_ID: case MMA8452_DEVICE_ID: case MMA8453_DEVICE_ID: case MMA8652_DEVICE_ID: @@ -1190,6 +1344,10 @@ static int mma8452_probe(struct i2c_client *client, if (ret < 0) goto buffer_cleanup; + ret = mma8452_set_freefall_mode(data, false); + if (ret) + return ret; + return 0; buffer_cleanup: diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 70f0427..a03a141 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -67,6 +67,8 @@ #define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10 #define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08 +#define ST_ACCEL_1_IHL_IRQ_ADDR 0x25 +#define ST_ACCEL_1_IHL_IRQ_MASK 0x02 #define ST_ACCEL_1_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 2 */ @@ -92,6 +94,8 @@ #define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02 #define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10 +#define ST_ACCEL_2_IHL_IRQ_ADDR 0x22 +#define ST_ACCEL_2_IHL_IRQ_MASK 0x80 #define ST_ACCEL_2_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 3 */ @@ -125,6 +129,8 @@ #define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23 #define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80 #define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00 +#define ST_ACCEL_3_IHL_IRQ_ADDR 0x23 +#define ST_ACCEL_3_IHL_IRQ_MASK 0x40 #define ST_ACCEL_3_IG1_EN_ADDR 0x23 #define ST_ACCEL_3_IG1_EN_MASK 0x08 #define ST_ACCEL_3_MULTIREAD_BIT false @@ -169,6 +175,8 @@ #define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04 #define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20 +#define ST_ACCEL_5_IHL_IRQ_ADDR 0x22 +#define ST_ACCEL_5_IHL_IRQ_MASK 0x80 #define ST_ACCEL_5_IG1_EN_ADDR 0x21 #define ST_ACCEL_5_IG1_EN_MASK 0x08 #define ST_ACCEL_5_MULTIREAD_BIT false @@ -292,6 +300,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_1_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT, .bootime = 2, @@ -355,6 +365,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_2_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT, .bootime = 2, @@ -430,6 +442,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_3_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK, .ig1 = { .en_addr = ST_ACCEL_3_IG1_EN_ADDR, .en_mask = ST_ACCEL_3_IG1_EN_MASK, @@ -537,6 +551,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_5_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT, .bootime = 2, /* guess */ diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 283ded7..82c718c 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -131,6 +131,17 @@ config AT91_ADC To compile this driver as a module, choose M here: the module will be called at91_adc. +config AT91_SAMA5D2_ADC + tristate "Atmel AT91 SAMA5D2 ADC" + depends on ARCH_AT91 || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for Atmel SAMA5D2 ADC which is + available on SAMA5D2 SoC family. + + To compile this driver as a module, choose M here: the module will be + called at91-sama5d2_adc. + config AXP288_ADC tristate "X-Powers AXP288 ADC driver" depends on MFD_AXP20X @@ -184,6 +195,13 @@ config EXYNOS_ADC To compile this driver as a module, choose M here: the module will be called exynos_adc. +config FSL_MX25_ADC + tristate "Freescale MX25 ADC driver" + depends on MFD_MX25_TSADC + help + Generic Conversion Queue driver used for general purpose ADC in the + MX25. This driver supports single measurements using the MX25 ADC. + config HI8435 tristate "Holt Integrated Circuits HI-8435 threshold detector" select IIO_TRIGGERED_EVENT @@ -267,11 +285,11 @@ config MCP320X called mcp320x. config MCP3422 - tristate "Microchip Technology MCP3422/3/4/6/7/8 driver" + tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver" depends on I2C help - Say yes here to build support for Microchip Technology's - MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428 + Say yes here to build support for Microchip Technology's MCP3421 + MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428 analog to digital converters. This driver can also be built as a module. If so, the module will be @@ -287,6 +305,20 @@ config MEN_Z188_ADC This driver can also be built as a module. If so, the module will be called men_z188_adc. +config MXS_LRADC + tristate "Freescale i.MX23/i.MX28 LRADC" + depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM + depends on INPUT + select STMP_DEVICE + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for i.MX23/i.MX28 LRADC convertor + built into these chips. + + To compile this driver as a module, choose M here: the + module will be called mxs-lradc. + config NAU7802 tristate "Nuvoton NAU7802 ADC driver" depends on I2C @@ -352,6 +384,16 @@ config TI_ADC081C This driver can also be built as a module. If so, the module will be called ti-adc081c. +config TI_ADC0832 + tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838" + depends on SPI + help + If you say yes here you get support for Texas Instruments ADC0831, + ADC0832, ADC0834, ADC0838 ADC chips. + + This driver can also be built as a module. If so, the module will be + called ti-adc0832. + config TI_ADC128S052 tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" depends on SPI @@ -362,6 +404,19 @@ config TI_ADC128S052 This driver can also be built as a module. If so, the module will be called ti-adc128s052. +config TI_ADS1015 + tristate "Texas Instruments ADS1015 ADC" + depends on I2C && !SENSORS_ADS1015 + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for Texas Instruments ADS1015 + ADC chip. + + This driver can also be built as a module. If so, the module will be + called ti-ads1015. + config TI_ADS8688 tristate "Texas Instruments ADS8688" depends on SPI && OF diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 6435780..0cb7921 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -14,11 +14,13 @@ obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AD799X) += ad799x.o obj-$(CONFIG_AT91_ADC) += at91_adc.o +obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o obj-$(CONFIG_AXP288_ADC) += axp288_adc.o obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o +obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o obj-$(CONFIG_HI8435) += hi8435.o obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o @@ -28,13 +30,16 @@ obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_MCP320X) += mcp320x.o obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o +obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o +obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o +obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o diff --git b/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c new file mode 100644 index 0000000..dbee13a --- /dev/null +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -0,0 +1,508 @@ +/* + * Atmel ADC driver for SAMA5D2 devices and compatible. + * + * Copyright (C) 2015 Atmel, + * 2015 Ludovic Desroches + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Control Register */ +#define AT91_SAMA5D2_CR 0x00 +/* Software Reset */ +#define AT91_SAMA5D2_CR_SWRST BIT(0) +/* Start Conversion */ +#define AT91_SAMA5D2_CR_START BIT(1) +/* Touchscreen Calibration */ +#define AT91_SAMA5D2_CR_TSCALIB BIT(2) +/* Comparison Restart */ +#define AT91_SAMA5D2_CR_CMPRST BIT(4) + +/* Mode Register */ +#define AT91_SAMA5D2_MR 0x04 +/* Trigger Selection */ +#define AT91_SAMA5D2_MR_TRGSEL(v) ((v) << 1) +/* ADTRG */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG0 0 +/* TIOA0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG1 1 +/* TIOA1 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG2 2 +/* TIOA2 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG3 3 +/* PWM event line 0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG4 4 +/* PWM event line 1 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG5 5 +/* TIOA3 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG6 6 +/* RTCOUT0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG7 7 +/* Sleep Mode */ +#define AT91_SAMA5D2_MR_SLEEP BIT(5) +/* Fast Wake Up */ +#define AT91_SAMA5D2_MR_FWUP BIT(6) +/* Prescaler Rate Selection */ +#define AT91_SAMA5D2_MR_PRESCAL(v) ((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET) +#define AT91_SAMA5D2_MR_PRESCAL_OFFSET 8 +#define AT91_SAMA5D2_MR_PRESCAL_MAX 0xff +/* Startup Time */ +#define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16) +/* Analog Change */ +#define AT91_SAMA5D2_MR_ANACH BIT(23) +/* Tracking Time */ +#define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24) +#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff +/* Transfer Time */ +#define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28) +#define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3 +/* Use Sequence Enable */ +#define AT91_SAMA5D2_MR_USEQ BIT(31) + +/* Channel Sequence Register 1 */ +#define AT91_SAMA5D2_SEQR1 0x08 +/* Channel Sequence Register 2 */ +#define AT91_SAMA5D2_SEQR2 0x0c +/* Channel Enable Register */ +#define AT91_SAMA5D2_CHER 0x10 +/* Channel Disable Register */ +#define AT91_SAMA5D2_CHDR 0x14 +/* Channel Status Register */ +#define AT91_SAMA5D2_CHSR 0x18 +/* Last Converted Data Register */ +#define AT91_SAMA5D2_LCDR 0x20 +/* Interrupt Enable Register */ +#define AT91_SAMA5D2_IER 0x24 +/* Interrupt Disable Register */ +#define AT91_SAMA5D2_IDR 0x28 +/* Interrupt Mask Register */ +#define AT91_SAMA5D2_IMR 0x2c +/* Interrupt Status Register */ +#define AT91_SAMA5D2_ISR 0x30 +/* Last Channel Trigger Mode Register */ +#define AT91_SAMA5D2_LCTMR 0x34 +/* Last Channel Compare Window Register */ +#define AT91_SAMA5D2_LCCWR 0x38 +/* Overrun Status Register */ +#define AT91_SAMA5D2_OVER 0x3c +/* Extended Mode Register */ +#define AT91_SAMA5D2_EMR 0x40 +/* Compare Window Register */ +#define AT91_SAMA5D2_CWR 0x44 +/* Channel Gain Register */ +#define AT91_SAMA5D2_CGR 0x48 +/* Channel Offset Register */ +#define AT91_SAMA5D2_COR 0x4c +/* Channel Data Register 0 */ +#define AT91_SAMA5D2_CDR0 0x50 +/* Analog Control Register */ +#define AT91_SAMA5D2_ACR 0x94 +/* Touchscreen Mode Register */ +#define AT91_SAMA5D2_TSMR 0xb0 +/* Touchscreen X Position Register */ +#define AT91_SAMA5D2_XPOSR 0xb4 +/* Touchscreen Y Position Register */ +#define AT91_SAMA5D2_YPOSR 0xb8 +/* Touchscreen Pressure Register */ +#define AT91_SAMA5D2_PRESSR 0xbc +/* Trigger Register */ +#define AT91_SAMA5D2_TRGR 0xc0 +/* Correction Select Register */ +#define AT91_SAMA5D2_COSR 0xd0 +/* Correction Value Register */ +#define AT91_SAMA5D2_CVR 0xd4 +/* Channel Error Correction Register */ +#define AT91_SAMA5D2_CECR 0xd8 +/* Write Protection Mode Register */ +#define AT91_SAMA5D2_WPMR 0xe4 +/* Write Protection Status Register */ +#define AT91_SAMA5D2_WPSR 0xe8 +/* Version Register */ +#define AT91_SAMA5D2_VERSION 0xfc + +#define AT91_AT91_SAMA5D2_CHAN(num, addr) \ + { \ + .type = IIO_VOLTAGE, \ + .channel = num, \ + .address = addr, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + }, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ + .datasheet_name = "CH"#num, \ + .indexed = 1, \ + } + +#define at91_adc_readl(st, reg) readl_relaxed(st->base + reg) +#define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg) + +struct at91_adc_soc_info { + unsigned startup_time; + unsigned min_sample_rate; + unsigned max_sample_rate; +}; + +struct at91_adc_state { + void __iomem *base; + int irq; + struct clk *per_clk; + struct regulator *reg; + struct regulator *vref; + int vref_uv; + const struct iio_chan_spec *chan; + bool conversion_done; + u32 conversion_value; + struct at91_adc_soc_info soc_info; + wait_queue_head_t wq_data_available; + /* + * lock to prevent concurrent 'single conversion' requests through + * sysfs. + */ + struct mutex lock; +}; + +static const struct iio_chan_spec at91_adc_channels[] = { + AT91_AT91_SAMA5D2_CHAN(0, 0x50), + AT91_AT91_SAMA5D2_CHAN(1, 0x54), + AT91_AT91_SAMA5D2_CHAN(2, 0x58), + AT91_AT91_SAMA5D2_CHAN(3, 0x5c), + AT91_AT91_SAMA5D2_CHAN(4, 0x60), + AT91_AT91_SAMA5D2_CHAN(5, 0x64), + AT91_AT91_SAMA5D2_CHAN(6, 0x68), + AT91_AT91_SAMA5D2_CHAN(7, 0x6c), + AT91_AT91_SAMA5D2_CHAN(8, 0x70), + AT91_AT91_SAMA5D2_CHAN(9, 0x74), + AT91_AT91_SAMA5D2_CHAN(10, 0x78), + AT91_AT91_SAMA5D2_CHAN(11, 0x7c), +}; + +static unsigned at91_adc_startup_time(unsigned startup_time_min, + unsigned adc_clk_khz) +{ + const unsigned startup_lookup[] = { + 0, 8, 16, 24, + 64, 80, 96, 112, + 512, 576, 640, 704, + 768, 832, 896, 960 + }; + unsigned ticks_min, i; + + /* + * Since the adc frequency is checked before, there is no reason + * to not meet the startup time constraint. + */ + + ticks_min = startup_time_min * adc_clk_khz / 1000; + for (i = 0; i < ARRAY_SIZE(startup_lookup); i++) + if (startup_lookup[i] > ticks_min) + break; + + return i; +} + +static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq) +{ + struct iio_dev *indio_dev = iio_priv_to_dev(st); + unsigned f_per, prescal, startup; + + f_per = clk_get_rate(st->per_clk); + prescal = (f_per / (2 * freq)) - 1; + + startup = at91_adc_startup_time(st->soc_info.startup_time, + freq / 1000); + + at91_adc_writel(st, AT91_SAMA5D2_MR, + AT91_SAMA5D2_MR_TRANSFER(2) + | AT91_SAMA5D2_MR_STARTUP(startup) + | AT91_SAMA5D2_MR_PRESCAL(prescal)); + + dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", + freq, startup, prescal); +} + +static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st) +{ + unsigned f_adc, f_per = clk_get_rate(st->per_clk); + unsigned mr, prescal; + + mr = at91_adc_readl(st, AT91_SAMA5D2_MR); + prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET) + & AT91_SAMA5D2_MR_PRESCAL_MAX; + f_adc = f_per / (2 * (prescal + 1)); + + return f_adc; +} + +static irqreturn_t at91_adc_interrupt(int irq, void *private) +{ + struct iio_dev *indio = private; + struct at91_adc_state *st = iio_priv(indio); + u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR); + u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR); + + if (status & imr) { + st->conversion_value = at91_adc_readl(st, st->chan->address); + st->conversion_done = true; + wake_up_interruptible(&st->wq_data_available); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int at91_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&st->lock); + + st->chan = chan; + + at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START); + + ret = wait_event_interruptible_timeout(st->wq_data_available, + st->conversion_done, + msecs_to_jiffies(1000)); + if (ret == 0) + ret = -ETIMEDOUT; + + if (ret > 0) { + *val = st->conversion_value; + ret = IIO_VAL_INT; + st->conversion_done = false; + } + + at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel)); + + mutex_unlock(&st->lock); + return ret; + + case IIO_CHAN_INFO_SCALE: + *val = st->vref_uv / 1000; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = at91_adc_get_sample_freq(st); + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int at91_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_SAMP_FREQ) + return -EINVAL; + + if (val < st->soc_info.min_sample_rate || + val > st->soc_info.max_sample_rate) + return -EINVAL; + + at91_adc_setup_samp_freq(st, val); + + return 0; +} + +static const struct iio_info at91_adc_info = { + .read_raw = &at91_adc_read_raw, + .write_raw = &at91_adc_write_raw, + .driver_module = THIS_MODULE, +}; + +static int at91_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct at91_adc_state *st; + struct resource *res; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = dev_name(&pdev->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &at91_adc_info; + indio_dev->channels = at91_adc_channels; + indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels); + + st = iio_priv(indio_dev); + + ret = of_property_read_u32(pdev->dev.of_node, + "atmel,min-sample-rate-hz", + &st->soc_info.min_sample_rate); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,min-sample-rate-hz\n"); + return ret; + } + + ret = of_property_read_u32(pdev->dev.of_node, + "atmel,max-sample-rate-hz", + &st->soc_info.max_sample_rate); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,max-sample-rate-hz\n"); + return ret; + } + + ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms", + &st->soc_info.startup_time); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,startup-time-ms\n"); + return ret; + } + + init_waitqueue_head(&st->wq_data_available); + mutex_init(&st->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + st->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(st->base)) + return PTR_ERR(st->base); + + st->irq = platform_get_irq(pdev, 0); + if (st->irq <= 0) { + if (!st->irq) + st->irq = -ENXIO; + + return st->irq; + } + + st->per_clk = devm_clk_get(&pdev->dev, "adc_clk"); + if (IS_ERR(st->per_clk)) + return PTR_ERR(st->per_clk); + + st->reg = devm_regulator_get(&pdev->dev, "vddana"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + st->vref = devm_regulator_get(&pdev->dev, "vref"); + if (IS_ERR(st->vref)) + return PTR_ERR(st->vref); + + ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0, + pdev->dev.driver->name, indio_dev); + if (ret) + return ret; + + ret = regulator_enable(st->reg); + if (ret) + return ret; + + ret = regulator_enable(st->vref); + if (ret) + goto reg_disable; + + st->vref_uv = regulator_get_voltage(st->vref); + if (st->vref_uv <= 0) { + ret = -EINVAL; + goto vref_disable; + } + + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST); + at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff); + + at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate); + + ret = clk_prepare_enable(st->per_clk); + if (ret) + goto vref_disable; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto per_clk_disable_unprepare; + + dev_info(&pdev->dev, "version: %x\n", + readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); + + return 0; + +per_clk_disable_unprepare: + clk_disable_unprepare(st->per_clk); +vref_disable: + regulator_disable(st->vref); +reg_disable: + regulator_disable(st->reg); + return ret; +} + +static int at91_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct at91_adc_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + clk_disable_unprepare(st->per_clk); + + regulator_disable(st->vref); + regulator_disable(st->reg); + + return 0; +} + +static const struct of_device_id at91_adc_dt_match[] = { + { + .compatible = "atmel,sama5d2-adc", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, at91_adc_dt_match); + +static struct platform_driver at91_adc_driver = { + .probe = at91_adc_probe, + .remove = at91_adc_remove, + .driver = { + .name = "at91-sama5d2_adc", + .of_match_table = at91_adc_dt_match, + }, +}; +module_platform_driver(at91_adc_driver) + +MODULE_AUTHOR("Ludovic Desroches "); +MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 0c904ed..7fd2494 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -46,7 +46,7 @@ struct axp288_adc_info { struct regmap *regmap; }; -static const struct iio_chan_spec const axp288_adc_channels[] = { +static const struct iio_chan_spec axp288_adc_channels[] = { { .indexed = 1, .type = IIO_TEMP, diff --git b/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c new file mode 100644 index 0000000..72b32c1 --- /dev/null +++ b/drivers/iio/adc/fsl-imx25-gcq.c @@ -0,0 +1,417 @@ +/* + * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + * + * This is the driver for the imx25 GCQ (Generic Conversion Queue) + * connected to the imx25 ADC. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MX25_GCQ_TIMEOUT (msecs_to_jiffies(2000)) + +static const char * const driver_name = "mx25-gcq"; + +enum mx25_gcq_cfgs { + MX25_CFG_XP = 0, + MX25_CFG_YP, + MX25_CFG_XN, + MX25_CFG_YN, + MX25_CFG_WIPER, + MX25_CFG_INAUX0, + MX25_CFG_INAUX1, + MX25_CFG_INAUX2, + MX25_NUM_CFGS, +}; + +struct mx25_gcq_priv { + struct regmap *regs; + struct completion completed; + struct clk *clk; + int irq; + struct regulator *vref[4]; + u32 channel_vref_mv[MX25_NUM_CFGS]; +}; + +#define MX25_CQG_CHAN(chan, id) {\ + .type = IIO_VOLTAGE,\ + .indexed = 1,\ + .channel = chan,\ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE),\ + .datasheet_name = id,\ +} + +static const struct iio_chan_spec mx25_gcq_channels[MX25_NUM_CFGS] = { + MX25_CQG_CHAN(MX25_CFG_XP, "xp"), + MX25_CQG_CHAN(MX25_CFG_YP, "yp"), + MX25_CQG_CHAN(MX25_CFG_XN, "xn"), + MX25_CQG_CHAN(MX25_CFG_YN, "yn"), + MX25_CQG_CHAN(MX25_CFG_WIPER, "wiper"), + MX25_CQG_CHAN(MX25_CFG_INAUX0, "inaux0"), + MX25_CQG_CHAN(MX25_CFG_INAUX1, "inaux1"), + MX25_CQG_CHAN(MX25_CFG_INAUX2, "inaux2"), +}; + +static const char * const mx25_gcq_refp_names[] = { + [MX25_ADC_REFP_YP] = "yp", + [MX25_ADC_REFP_XP] = "xp", + [MX25_ADC_REFP_INT] = "int", + [MX25_ADC_REFP_EXT] = "ext", +}; + +static irqreturn_t mx25_gcq_irq(int irq, void *data) +{ + struct mx25_gcq_priv *priv = data; + u32 stats; + + regmap_read(priv->regs, MX25_ADCQ_SR, &stats); + + if (stats & MX25_ADCQ_SR_EOQ) { + regmap_update_bits(priv->regs, MX25_ADCQ_MR, + MX25_ADCQ_MR_EOQ_IRQ, MX25_ADCQ_MR_EOQ_IRQ); + complete(&priv->completed); + } + + /* Disable conversion queue run */ + regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 0); + + /* Acknowledge all possible irqs */ + regmap_write(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR | + MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR | + MX25_ADCQ_SR_EOQ | MX25_ADCQ_SR_PD); + + return IRQ_HANDLED; +} + +static int mx25_gcq_get_raw_value(struct device *dev, + struct iio_chan_spec const *chan, + struct mx25_gcq_priv *priv, + int *val) +{ + long timeout; + u32 data; + + /* Setup the configuration we want to use */ + regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0, + MX25_ADCQ_ITEM(0, chan->channel)); + + regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_EOQ_IRQ, 0); + + /* Trigger queue for one run */ + regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, + MX25_ADCQ_CR_FQS); + + timeout = wait_for_completion_interruptible_timeout( + &priv->completed, MX25_GCQ_TIMEOUT); + if (timeout < 0) { + dev_err(dev, "ADC wait for measurement failed\n"); + return timeout; + } else if (timeout == 0) { + dev_err(dev, "ADC timed out\n"); + return -ETIMEDOUT; + } + + regmap_read(priv->regs, MX25_ADCQ_FIFO, &data); + + *val = MX25_ADCQ_FIFO_DATA(data); + + return IIO_VAL_INT; +} + +static int mx25_gcq_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct mx25_gcq_priv *priv = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val); + mutex_unlock(&indio_dev->mlock); + return ret; + + case IIO_CHAN_INFO_SCALE: + *val = priv->channel_vref_mv[chan->channel]; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +static const struct iio_info mx25_gcq_iio_info = { + .read_raw = mx25_gcq_read_raw, +}; + +static const struct regmap_config mx25_gcq_regconfig = { + .max_register = 0x5c, + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int mx25_gcq_setup_cfgs(struct platform_device *pdev, + struct mx25_gcq_priv *priv) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + struct device *dev = &pdev->dev; + unsigned int refp_used[4] = {}; + int ret, i; + + /* + * Setup all configurations registers with a default conversion + * configuration for each input + */ + for (i = 0; i < MX25_NUM_CFGS; ++i) + regmap_write(priv->regs, MX25_ADCQ_CFG(i), + MX25_ADCQ_CFG_YPLL_OFF | + MX25_ADCQ_CFG_XNUR_OFF | + MX25_ADCQ_CFG_XPUL_OFF | + MX25_ADCQ_CFG_REFP_INT | + MX25_ADCQ_CFG_IN(i) | + MX25_ADCQ_CFG_REFN_NGND2); + + /* + * First get all regulators to store them in channel_vref_mv if + * necessary. Later we use that information for proper IIO scale + * information. + */ + priv->vref[MX25_ADC_REFP_INT] = NULL; + priv->vref[MX25_ADC_REFP_EXT] = + devm_regulator_get_optional(&pdev->dev, "vref-ext"); + priv->vref[MX25_ADC_REFP_XP] = + devm_regulator_get_optional(&pdev->dev, "vref-xp"); + priv->vref[MX25_ADC_REFP_YP] = + devm_regulator_get_optional(&pdev->dev, "vref-yp"); + + for_each_child_of_node(np, child) { + u32 reg; + u32 refp = MX25_ADCQ_CFG_REFP_INT; + u32 refn = MX25_ADCQ_CFG_REFN_NGND2; + + ret = of_property_read_u32(child, "reg", ®); + if (ret) { + dev_err(dev, "Failed to get reg property\n"); + return ret; + } + + if (reg >= MX25_NUM_CFGS) { + dev_err(dev, + "reg value is greater than the number of available configuration registers\n"); + return -EINVAL; + } + + of_property_read_u32(child, "fsl,adc-refp", &refp); + of_property_read_u32(child, "fsl,adc-refn", &refn); + + switch (refp) { + case MX25_ADC_REFP_EXT: + case MX25_ADC_REFP_XP: + case MX25_ADC_REFP_YP: + if (IS_ERR(priv->vref[refp])) { + dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.", + mx25_gcq_refp_names[refp]); + return PTR_ERR(priv->vref[refp]); + } + priv->channel_vref_mv[reg] = + regulator_get_voltage(priv->vref[refp]); + /* Conversion from uV to mV */ + priv->channel_vref_mv[reg] /= 1000; + break; + case MX25_ADC_REFP_INT: + priv->channel_vref_mv[reg] = 2500; + break; + default: + dev_err(dev, "Invalid positive reference %d\n", refp); + return -EINVAL; + } + + ++refp_used[refp]; + + /* + * Shift the read values to the correct positions within the + * register. + */ + refp = MX25_ADCQ_CFG_REFP(refp); + refn = MX25_ADCQ_CFG_REFN(refn); + + if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) { + dev_err(dev, "Invalid fsl,adc-refp property value\n"); + return -EINVAL; + } + if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) { + dev_err(dev, "Invalid fsl,adc-refn property value\n"); + return -EINVAL; + } + + regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg), + MX25_ADCQ_CFG_REFP_MASK | + MX25_ADCQ_CFG_REFN_MASK, + refp | refn); + } + regmap_update_bits(priv->regs, MX25_ADCQ_CR, + MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST, + MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST); + + regmap_write(priv->regs, MX25_ADCQ_CR, + MX25_ADCQ_CR_PDMSK | MX25_ADCQ_CR_QSM_FQS); + + /* Remove unused regulators */ + for (i = 0; i != 4; ++i) { + if (!refp_used[i]) { + if (!IS_ERR_OR_NULL(priv->vref[i])) + devm_regulator_put(priv->vref[i]); + priv->vref[i] = NULL; + } + } + + return 0; +} + +static int mx25_gcq_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct mx25_gcq_priv *priv; + struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *mem; + int ret; + int i; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mem = devm_ioremap_resource(dev, res); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig); + if (IS_ERR(priv->regs)) { + dev_err(dev, "Failed to initialize regmap\n"); + return PTR_ERR(priv->regs); + } + + init_completion(&priv->completed); + + ret = mx25_gcq_setup_cfgs(pdev, priv); + if (ret) + return ret; + + for (i = 0; i != 4; ++i) { + if (!priv->vref[i]) + continue; + + ret = regulator_enable(priv->vref[i]); + if (ret) + goto err_regulator_disable; + } + + priv->clk = tsadc->clk; + ret = clk_prepare_enable(priv->clk); + if (ret) { + dev_err(dev, "Failed to enable clock\n"); + goto err_vref_disable; + } + + priv->irq = platform_get_irq(pdev, 0); + if (priv->irq <= 0) { + dev_err(dev, "Failed to get IRQ\n"); + ret = priv->irq; + if (!ret) + ret = -ENXIO; + goto err_clk_unprepare; + } + + ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv); + if (ret) { + dev_err(dev, "Failed requesting IRQ\n"); + goto err_clk_unprepare; + } + + indio_dev->dev.parent = &pdev->dev; + indio_dev->channels = mx25_gcq_channels; + indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels); + indio_dev->info = &mx25_gcq_iio_info; + indio_dev->name = driver_name; + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "Failed to register iio device\n"); + goto err_irq_free; + } + + platform_set_drvdata(pdev, indio_dev); + + return 0; + +err_irq_free: + free_irq(priv->irq, priv); +err_clk_unprepare: + clk_disable_unprepare(priv->clk); +err_vref_disable: + i = 4; +err_regulator_disable: + for (; i-- > 0;) { + if (priv->vref[i]) + regulator_disable(priv->vref[i]); + } + return ret; +} + +static int mx25_gcq_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct mx25_gcq_priv *priv = iio_priv(indio_dev); + int i; + + iio_device_unregister(indio_dev); + free_irq(priv->irq, priv); + clk_disable_unprepare(priv->clk); + for (i = 4; i-- > 0;) { + if (priv->vref[i]) + regulator_disable(priv->vref[i]); + } + + return 0; +} + +static const struct of_device_id mx25_gcq_ids[] = { + { .compatible = "fsl,imx25-gcq", }, + { /* Sentinel */ } +}; + +static struct platform_driver mx25_gcq_driver = { + .driver = { + .name = "mx25-gcq", + .of_match_table = mx25_gcq_ids, + }, + .probe = mx25_gcq_probe, + .remove = mx25_gcq_remove, +}; +module_platform_driver(mx25_gcq_driver); + +MODULE_DESCRIPTION("ADC driver for Freescale mx25"); +MODULE_AUTHOR("Markus Pargmann "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c index d803e50..65909d5 100644 --- a/drivers/iio/adc/ina2xx-adc.c +++ b/drivers/iio/adc/ina2xx-adc.c @@ -19,17 +19,18 @@ * * Configurable 7-bit I2C slave address from 0x40 to 0x4F */ -#include -#include + #include +#include #include #include -#include +#include +#include #include -#include - #include +#include + /* INA2XX registers definition */ #define INA2XX_CONFIG 0x00 #define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */ @@ -38,7 +39,7 @@ #define INA2XX_CURRENT 0x04 /* readonly */ #define INA2XX_CALIBRATION 0x05 -#define INA226_ALERT_MASK 0x06 +#define INA226_ALERT_MASK GENMASK(2, 1) #define INA266_CVRF BIT(3) #define INA2XX_MAX_REGISTERS 8 @@ -113,7 +114,7 @@ struct ina2xx_chip_info { struct mutex state_lock; unsigned int shunt_resistor; int avg; - s64 prev_ns; /* track buffer capture time, check for underruns*/ + s64 prev_ns; /* track buffer capture time, check for underruns */ int int_time_vbus; /* Bus voltage integration time uS */ int int_time_vshunt; /* Shunt voltage integration time uS */ bool allow_async_readout; @@ -121,21 +122,21 @@ struct ina2xx_chip_info { static const struct ina2xx_config ina2xx_config[] = { [ina219] = { - .config_default = INA219_CONFIG_DEFAULT, - .calibration_factor = 40960000, - .shunt_div = 100, - .bus_voltage_shift = 3, - .bus_voltage_lsb = 4000, - .power_lsb = 20000, - }, + .config_default = INA219_CONFIG_DEFAULT, + .calibration_factor = 40960000, + .shunt_div = 100, + .bus_voltage_shift = 3, + .bus_voltage_lsb = 4000, + .power_lsb = 20000, + }, [ina226] = { - .config_default = INA226_CONFIG_DEFAULT, - .calibration_factor = 5120000, - .shunt_div = 400, - .bus_voltage_shift = 0, - .bus_voltage_lsb = 1250, - .power_lsb = 25000, - }, + .config_default = INA226_CONFIG_DEFAULT, + .calibration_factor = 5120000, + .shunt_div = 400, + .bus_voltage_shift = 0, + .bus_voltage_lsb = 1250, + .power_lsb = 25000, + }, }; static int ina2xx_read_raw(struct iio_dev *indio_dev, @@ -149,7 +150,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: ret = regmap_read(chip->regmap, chan->address, ®val); - if (ret < 0) + if (ret) return ret; if (is_signed_reg(chan->address)) @@ -251,7 +252,7 @@ static int ina226_set_int_time_vbus(struct ina2xx_chip_info *chip, return -EINVAL; bits = find_closest(val_us, ina226_conv_time_tab, - ARRAY_SIZE(ina226_conv_time_tab)); + ARRAY_SIZE(ina226_conv_time_tab)); chip->int_time_vbus = ina226_conv_time_tab[bits]; @@ -270,7 +271,7 @@ static int ina226_set_int_time_vshunt(struct ina2xx_chip_info *chip, return -EINVAL; bits = find_closest(val_us, ina226_conv_time_tab, - ARRAY_SIZE(ina226_conv_time_tab)); + ARRAY_SIZE(ina226_conv_time_tab)); chip->int_time_vshunt = ina226_conv_time_tab[bits]; @@ -285,8 +286,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct ina2xx_chip_info *chip = iio_priv(indio_dev); - int ret; unsigned int config, tmp; + int ret; if (iio_buffer_enabled(indio_dev)) return -EBUSY; @@ -294,8 +295,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev, mutex_lock(&chip->state_lock); ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config); - if (ret < 0) - goto _err; + if (ret) + goto err; tmp = config; @@ -310,19 +311,19 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev, else ret = ina226_set_int_time_vbus(chip, val2, &tmp); break; + default: ret = -EINVAL; } if (!ret && (tmp != config)) ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp); -_err: +err: mutex_unlock(&chip->state_lock); return ret; } - static ssize_t ina2xx_allow_async_readout_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -355,6 +356,7 @@ static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val) return -EINVAL; chip->shunt_resistor = val; + return 0; } @@ -438,7 +440,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev) struct ina2xx_chip_info *chip = iio_priv(indio_dev); unsigned short data[8]; int bit, ret, i = 0; - unsigned long buffer_us, elapsed_us; s64 time_a, time_b; unsigned int alert; @@ -462,8 +463,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev) return ret; alert &= INA266_CVRF; - trace_printk("Conversion ready: %d\n", !!alert); - } while (!alert); /* @@ -488,19 +487,14 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev) iio_push_to_buffers_with_timestamp(indio_dev, (unsigned int *)data, time_a); - buffer_us = (unsigned long)(time_b - time_a) / 1000; - elapsed_us = (unsigned long)(time_a - chip->prev_ns) / 1000; - - trace_printk("uS: elapsed: %lu, buf: %lu\n", elapsed_us, buffer_us); - chip->prev_ns = time_a; - return buffer_us; + return (unsigned long)(time_b - time_a) / 1000; }; static int ina2xx_capture_thread(void *data) { - struct iio_dev *indio_dev = (struct iio_dev *)data; + struct iio_dev *indio_dev = data; struct ina2xx_chip_info *chip = iio_priv(indio_dev); unsigned int sampling_us = SAMPLING_PERIOD(chip); int buffer_us; @@ -530,12 +524,13 @@ static int ina2xx_buffer_enable(struct iio_dev *indio_dev) struct ina2xx_chip_info *chip = iio_priv(indio_dev); unsigned int sampling_us = SAMPLING_PERIOD(chip); - trace_printk("Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n", - (unsigned int)(*indio_dev->active_scan_mask), - 1000000/sampling_us, chip->avg); + dev_dbg(&indio_dev->dev, "Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n", + (unsigned int)(*indio_dev->active_scan_mask), + 1000000 / sampling_us, chip->avg); - trace_printk("Expected work period: %u us\n", sampling_us); - trace_printk("Async readout mode: %d\n", chip->allow_async_readout); + dev_dbg(&indio_dev->dev, "Expected work period: %u us\n", sampling_us); + dev_dbg(&indio_dev->dev, "Async readout mode: %d\n", + chip->allow_async_readout); chip->prev_ns = iio_get_time_ns(); @@ -575,8 +570,7 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev, } /* Possible integration times for vshunt and vbus */ -static IIO_CONST_ATTR_INT_TIME_AVAIL \ - ("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244"); +static IIO_CONST_ATTR_INT_TIME_AVAIL("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244"); static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR, ina2xx_allow_async_readout_show, @@ -598,21 +592,23 @@ static const struct attribute_group ina2xx_attribute_group = { }; static const struct iio_info ina2xx_info = { - .debugfs_reg_access = &ina2xx_debug_reg, - .read_raw = &ina2xx_read_raw, - .write_raw = &ina2xx_write_raw, - .attrs = &ina2xx_attribute_group, .driver_module = THIS_MODULE, + .attrs = &ina2xx_attribute_group, + .read_raw = ina2xx_read_raw, + .write_raw = ina2xx_write_raw, + .debugfs_reg_access = ina2xx_debug_reg, }; /* Initialize the configuration and calibration registers. */ static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config) { u16 regval; - int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config); + int ret; - if (ret < 0) + ret = regmap_write(chip->regmap, INA2XX_CONFIG, config); + if (ret) return ret; + /* * Set current LSB to 1mA, shunt is in uOhms * (equation 13 in datasheet). We hardcode a Current_LSB @@ -621,7 +617,7 @@ static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config) * to the user for now. */ regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor, - chip->shunt_resistor); + chip->shunt_resistor); return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval); } @@ -632,8 +628,8 @@ static int ina2xx_probe(struct i2c_client *client, struct ina2xx_chip_info *chip; struct iio_dev *indio_dev; struct iio_buffer *buffer; - int ret; unsigned int val; + int ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); if (!indio_dev) @@ -641,8 +637,19 @@ static int ina2xx_probe(struct i2c_client *client, chip = iio_priv(indio_dev); + /* This is only used for device removal purposes. */ + i2c_set_clientdata(client, indio_dev); + + chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config); + if (IS_ERR(chip->regmap)) { + dev_err(&client->dev, "failed to allocate register map\n"); + return PTR_ERR(chip->regmap); + } + chip->config = &ina2xx_config[id->driver_data]; + mutex_init(&chip->state_lock); + if (of_property_read_u32(client->dev.of_node, "shunt-resistor", &val) < 0) { struct ina2xx_platform_data *pdata = @@ -658,25 +665,6 @@ static int ina2xx_probe(struct i2c_client *client, if (ret) return ret; - mutex_init(&chip->state_lock); - - /* This is only used for device removal purposes. */ - i2c_set_clientdata(client, indio_dev); - - indio_dev->name = id->name; - indio_dev->channels = ina2xx_channels; - indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels); - - indio_dev->dev.parent = &client->dev; - indio_dev->info = &ina2xx_info; - indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; - - chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config); - if (IS_ERR(chip->regmap)) { - dev_err(&client->dev, "failed to allocate register map\n"); - return PTR_ERR(chip->regmap); - } - /* Patch the current config register with default. */ val = chip->config->config_default; @@ -687,24 +675,28 @@ static int ina2xx_probe(struct i2c_client *client, } ret = ina2xx_init(chip, val); - if (ret < 0) { - dev_err(&client->dev, "error configuring the device: %d\n", - ret); - return -ENODEV; + if (ret) { + dev_err(&client->dev, "error configuring the device\n"); + return ret; } + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + indio_dev->dev.parent = &client->dev; + indio_dev->channels = ina2xx_channels; + indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels); + indio_dev->name = id->name; + indio_dev->info = &ina2xx_info; + indio_dev->setup_ops = &ina2xx_setup_ops; + buffer = devm_iio_kfifo_allocate(&indio_dev->dev); if (!buffer) return -ENOMEM; - indio_dev->setup_ops = &ina2xx_setup_ops; - iio_device_attach_buffer(indio_dev, buffer); return iio_device_register(indio_dev); } - static int ina2xx_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); @@ -717,7 +709,6 @@ static int ina2xx_remove(struct i2c_client *client) INA2XX_MODE_MASK, 0); } - static const struct i2c_device_id ina2xx_id[] = { {"ina219", ina219}, {"ina220", ina219}, @@ -726,7 +717,6 @@ static const struct i2c_device_id ina2xx_id[] = { {"ina231", ina226}, {} }; - MODULE_DEVICE_TABLE(i2c, ina2xx_id); static struct i2c_driver ina2xx_driver = { @@ -737,7 +727,6 @@ static struct i2c_driver ina2xx_driver = { .remove = ina2xx_remove, .id_table = ina2xx_id, }; - module_i2c_driver(ina2xx_driver); MODULE_AUTHOR("Marc Titinger "); diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 929508e..998dc3c 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -1386,7 +1386,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11644] = { .bits = 12, - .int_vref_mv = 2048, + .int_vref_mv = 4096, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1396,7 +1396,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11645] = { .bits = 12, - .int_vref_mv = 4096, + .int_vref_mv = 2048, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1406,7 +1406,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11646] = { .bits = 10, - .int_vref_mv = 2048, + .int_vref_mv = 4096, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1416,7 +1416,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11647] = { .bits = 10, - .int_vref_mv = 4096, + .int_vref_mv = 2048, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1680,6 +1680,10 @@ static const struct i2c_device_id max1363_id[] = { { "max11615", max11615 }, { "max11616", max11616 }, { "max11617", max11617 }, + { "max11644", max11644 }, + { "max11645", max11645 }, + { "max11646", max11646 }, + { "max11647", max11647 }, {} }; diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index d1c05f6..a850ca7 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -187,26 +187,27 @@ out: .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } -#define MCP320X_VOLTAGE_CHANNEL_DIFF(num) \ +#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ - .channel = (num * 2), \ - .channel2 = (num * 2 + 1), \ - .address = (num * 2), \ + .channel = (chan1), \ + .channel2 = (chan2), \ + .address = (chan1), \ .differential = 1, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } static const struct iio_chan_spec mcp3201_channels[] = { - MCP320X_VOLTAGE_CHANNEL_DIFF(0), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), }; static const struct iio_chan_spec mcp3202_channels[] = { MCP320X_VOLTAGE_CHANNEL(0), MCP320X_VOLTAGE_CHANNEL(1), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), }; static const struct iio_chan_spec mcp3204_channels[] = { @@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = { MCP320X_VOLTAGE_CHANNEL(1), MCP320X_VOLTAGE_CHANNEL(2), MCP320X_VOLTAGE_CHANNEL(3), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), - MCP320X_VOLTAGE_CHANNEL_DIFF(1), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), }; static const struct iio_chan_spec mcp3208_channels[] = { @@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = { MCP320X_VOLTAGE_CHANNEL(5), MCP320X_VOLTAGE_CHANNEL(6), MCP320X_VOLTAGE_CHANNEL(7), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), - MCP320X_VOLTAGE_CHANNEL_DIFF(1), - MCP320X_VOLTAGE_CHANNEL_DIFF(2), - MCP320X_VOLTAGE_CHANNEL_DIFF(3), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), + MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5), + MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4), + MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7), + MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6), }; static const struct iio_info mcp320x_info = { diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index 6eca7ae..d7b36ef 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -1,11 +1,12 @@ /* - * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family + * mcp3422.c - driver for the Microchip mcp3421/2/3/4/5/6/7/8 chip family * * Copyright (C) 2013, Angelo Compagnucci * Author: Angelo Compagnucci * * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf * http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf + * http://ww1.microchip.com/downloads/en/DeviceDoc/22072b.pdf * * This driver exports the value of analog input voltage to sysfs, the * voltage unit is nV. @@ -338,7 +339,7 @@ static int mcp3422_probe(struct i2c_client *client, u8 config; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!indio_dev) @@ -357,6 +358,7 @@ static int mcp3422_probe(struct i2c_client *client, switch (adc->id) { case 1: + case 5: indio_dev->channels = mcp3421_channels; indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels); break; @@ -395,6 +397,7 @@ static const struct i2c_device_id mcp3422_id[] = { { "mcp3422", 2 }, { "mcp3423", 3 }, { "mcp3424", 4 }, + { "mcp3425", 5 }, { "mcp3426", 6 }, { "mcp3427", 7 }, { "mcp3428", 8 }, @@ -421,5 +424,5 @@ static struct i2c_driver mcp3422_driver = { module_i2c_driver(mcp3422_driver); MODULE_AUTHOR("Angelo Compagnucci "); -MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver"); +MODULE_DESCRIPTION("Microchip mcp3421/2/3/4/5/6/7/8 driver"); MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c new file mode 100644 index 0000000..33051b8 --- /dev/null +++ b/drivers/iio/adc/mxs-lradc.c @@ -0,0 +1,1775 @@ +/* + * Freescale MXS LRADC driver + * + * Copyright (c) 2012 DENX Software Engineering, GmbH. + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "mxs-lradc" + +#define LRADC_MAX_DELAY_CHANS 4 +#define LRADC_MAX_MAPPED_CHANS 8 +#define LRADC_MAX_TOTAL_CHANS 16 + +#define LRADC_DELAY_TIMER_HZ 2000 + +/* + * Make this runtime configurable if necessary. Currently, if the buffered mode + * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before + * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) + * seconds. The result is that the samples arrive every 500mS. + */ +#define LRADC_DELAY_TIMER_PER 200 +#define LRADC_DELAY_TIMER_LOOP 5 + +/* + * Once the pen touches the touchscreen, the touchscreen switches from + * IRQ-driven mode to polling mode to prevent interrupt storm. The polling + * is realized by worker thread, which is called every 20 or so milliseconds. + * This gives the touchscreen enough fluency and does not strain the system + * too much. + */ +#define LRADC_TS_SAMPLE_DELAY_MS 5 + +/* + * The LRADC reads the following amount of samples from each touchscreen + * channel and the driver then computes average of these. + */ +#define LRADC_TS_SAMPLE_AMOUNT 4 + +enum mxs_lradc_id { + IMX23_LRADC, + IMX28_LRADC, +}; + +static const char * const mx23_lradc_irq_names[] = { + "mxs-lradc-touchscreen", + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", + "mxs-lradc-channel6", + "mxs-lradc-channel7", +}; + +static const char * const mx28_lradc_irq_names[] = { + "mxs-lradc-touchscreen", + "mxs-lradc-thresh0", + "mxs-lradc-thresh1", + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", + "mxs-lradc-channel6", + "mxs-lradc-channel7", + "mxs-lradc-button0", + "mxs-lradc-button1", +}; + +struct mxs_lradc_of_config { + const int irq_count; + const char * const *irq_name; + const u32 *vref_mv; +}; + +#define VREF_MV_BASE 1850 + +static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = { + VREF_MV_BASE, /* CH0 */ + VREF_MV_BASE, /* CH1 */ + VREF_MV_BASE, /* CH2 */ + VREF_MV_BASE, /* CH3 */ + VREF_MV_BASE, /* CH4 */ + VREF_MV_BASE, /* CH5 */ + VREF_MV_BASE * 2, /* CH6 VDDIO */ + VREF_MV_BASE * 4, /* CH7 VBATT */ + VREF_MV_BASE, /* CH8 Temp sense 0 */ + VREF_MV_BASE, /* CH9 Temp sense 1 */ + VREF_MV_BASE, /* CH10 */ + VREF_MV_BASE, /* CH11 */ + VREF_MV_BASE, /* CH12 USB_DP */ + VREF_MV_BASE, /* CH13 USB_DN */ + VREF_MV_BASE, /* CH14 VBG */ + VREF_MV_BASE * 4, /* CH15 VDD5V */ +}; + +static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = { + VREF_MV_BASE, /* CH0 */ + VREF_MV_BASE, /* CH1 */ + VREF_MV_BASE, /* CH2 */ + VREF_MV_BASE, /* CH3 */ + VREF_MV_BASE, /* CH4 */ + VREF_MV_BASE, /* CH5 */ + VREF_MV_BASE, /* CH6 */ + VREF_MV_BASE * 4, /* CH7 VBATT */ + VREF_MV_BASE, /* CH8 Temp sense 0 */ + VREF_MV_BASE, /* CH9 Temp sense 1 */ + VREF_MV_BASE * 2, /* CH10 VDDIO */ + VREF_MV_BASE, /* CH11 VTH */ + VREF_MV_BASE * 2, /* CH12 VDDA */ + VREF_MV_BASE, /* CH13 VDDD */ + VREF_MV_BASE, /* CH14 VBG */ + VREF_MV_BASE * 4, /* CH15 VDD5V */ +}; + +static const struct mxs_lradc_of_config mxs_lradc_of_config[] = { + [IMX23_LRADC] = { + .irq_count = ARRAY_SIZE(mx23_lradc_irq_names), + .irq_name = mx23_lradc_irq_names, + .vref_mv = mx23_vref_mv, + }, + [IMX28_LRADC] = { + .irq_count = ARRAY_SIZE(mx28_lradc_irq_names), + .irq_name = mx28_lradc_irq_names, + .vref_mv = mx28_vref_mv, + }, +}; + +enum mxs_lradc_ts { + MXS_LRADC_TOUCHSCREEN_NONE = 0, + MXS_LRADC_TOUCHSCREEN_4WIRE, + MXS_LRADC_TOUCHSCREEN_5WIRE, +}; + +/* + * Touchscreen handling + */ +enum lradc_ts_plate { + LRADC_TOUCH = 0, + LRADC_SAMPLE_X, + LRADC_SAMPLE_Y, + LRADC_SAMPLE_PRESSURE, + LRADC_SAMPLE_VALID, +}; + +enum mxs_lradc_divbytwo { + MXS_LRADC_DIV_DISABLED = 0, + MXS_LRADC_DIV_ENABLED, +}; + +struct mxs_lradc_scale { + unsigned int integer; + unsigned int nano; +}; + +struct mxs_lradc { + struct device *dev; + void __iomem *base; + int irq[13]; + + struct clk *clk; + + u32 *buffer; + struct iio_trigger *trig; + + struct mutex lock; + + struct completion completion; + + const u32 *vref_mv; + struct mxs_lradc_scale scale_avail[LRADC_MAX_TOTAL_CHANS][2]; + unsigned long is_divided; + + /* + * When the touchscreen is enabled, we give it two private virtual + * channels: #6 and #7. This means that only 6 virtual channels (instead + * of 8) will be available for buffered capture. + */ +#define TOUCHSCREEN_VCHANNEL1 7 +#define TOUCHSCREEN_VCHANNEL2 6 +#define BUFFER_VCHANS_LIMITED 0x3f +#define BUFFER_VCHANS_ALL 0xff + u8 buffer_vchans; + + /* + * Furthermore, certain LRADC channels are shared between touchscreen + * and/or touch-buttons and generic LRADC block. Therefore when using + * either of these, these channels are not available for the regular + * sampling. The shared channels are as follows: + * + * CH0 -- Touch button #0 + * CH1 -- Touch button #1 + * CH2 -- Touch screen XPUL + * CH3 -- Touch screen YPLL + * CH4 -- Touch screen XNUL + * CH5 -- Touch screen YNLR + * CH6 -- Touch screen WIPER (5-wire only) + * + * The bit fields below represents which parts of the LRADC block are + * switched into special mode of operation. These channels can not + * be sampled as regular LRADC channels. The driver will refuse any + * attempt to sample these channels. + */ +#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0)) +#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) +#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) + enum mxs_lradc_ts use_touchscreen; + bool use_touchbutton; + + struct input_dev *ts_input; + + enum mxs_lradc_id soc; + enum lradc_ts_plate cur_plate; /* state machine */ + bool ts_valid; + unsigned ts_x_pos; + unsigned ts_y_pos; + unsigned ts_pressure; + + /* handle touchscreen's physical behaviour */ + /* samples per coordinate */ + unsigned over_sample_cnt; + /* time clocks between samples */ + unsigned over_sample_delay; + /* time in clocks to wait after the plates where switched */ + unsigned settling_delay; +}; + +#define LRADC_CTRL0 0x00 +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23) +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22) +# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21) +# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20) +# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19) +# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18) +# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17) +# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16) + +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20) +# define LRADC_CTRL0_MX23_YM BIT(19) +# define LRADC_CTRL0_MX23_XM BIT(18) +# define LRADC_CTRL0_MX23_YP BIT(17) +# define LRADC_CTRL0_MX23_XP BIT(16) + +# define LRADC_CTRL0_MX28_PLATE_MASK \ + (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \ + LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \ + LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \ + LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW) + +# define LRADC_CTRL0_MX23_PLATE_MASK \ + (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \ + LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \ + LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP) + +#define LRADC_CTRL1 0x10 +#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24) +#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) +#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) +#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16) +#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 +#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8) +#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) +#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff +#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff +#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0 + +#define LRADC_CTRL2 0x20 +#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24 +#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15) + +#define LRADC_STATUS 0x40 +#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0) + +#define LRADC_CH(n) (0x50 + (0x10 * (n))) +#define LRADC_CH_ACCUMULATE BIT(29) +#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) +#define LRADC_CH_NUM_SAMPLES_OFFSET 24 +#define LRADC_CH_NUM_SAMPLES(x) \ + ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) +#define LRADC_CH_VALUE_MASK 0x3ffff +#define LRADC_CH_VALUE_OFFSET 0 + +#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) +#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24) +#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 +#define LRADC_DELAY_TRIGGER(x) \ + (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ + LRADC_DELAY_TRIGGER_LRADCS_MASK) +#define LRADC_DELAY_KICK BIT(20) +#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) +#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 +#define LRADC_DELAY_TRIGGER_DELAYS(x) \ + (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ + LRADC_DELAY_TRIGGER_DELAYS_MASK) +#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) +#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 +#define LRADC_DELAY_LOOP(x) \ + (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ + LRADC_DELAY_LOOP_COUNT_MASK) +#define LRADC_DELAY_DELAY_MASK 0x7ff +#define LRADC_DELAY_DELAY_OFFSET 0 +#define LRADC_DELAY_DELAY(x) \ + (((x) << LRADC_DELAY_DELAY_OFFSET) & \ + LRADC_DELAY_DELAY_MASK) + +#define LRADC_CTRL4 0x140 +#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) +#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) +#define LRADC_CTRL4_LRADCSELECT(n, x) \ + (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ + LRADC_CTRL4_LRADCSELECT_MASK(n)) + +#define LRADC_RESOLUTION 12 +#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) + +static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg + STMP_OFFSET_REG_SET); +} + +static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR); +} + +static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg); +} + +static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_PLATE_MASK; + return LRADC_CTRL0_MX28_PLATE_MASK; +} + +static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK; + return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK; +} + +static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL1_MX23_LRADC_IRQ_MASK; + return LRADC_CTRL1_MX28_LRADC_IRQ_MASK; +} + +static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE; + return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE; +} + +static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM; + return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW; +} + +static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM; + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW; +} + +static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM; + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW; +} + +static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc) +{ + return !!(readl(lradc->base + LRADC_STATUS) & + LRADC_STATUS_TOUCH_DETECT_RAW); +} + +static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch, + unsigned ch) +{ + mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch), + LRADC_CTRL4); + mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4); +} + +static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) +{ + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1), + LRADC_CH(ch)); + + /* + * from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch)); + + /* + * prepare the delay/loop unit according to the oversampling count + * + * from the datasheet: + * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1, + * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise, + * the LRADC will not trigger the delay group." + */ + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) | + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1); + + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(lradc->settling_delay), + LRADC_DELAY(2)); +} + +/* + * Pressure detection is special: + * We want to do both required measurements for the pressure detection in + * one turn. Use the hardware features to chain both conversions and let the + * hardware report one interrupt if both conversions are done + */ +static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1, + unsigned ch2) +{ + u32 reg; + + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + reg = LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1); + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1)); + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2)); + + /* + * from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1)); + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2)); + + /* prepare the delay/loop unit according to the oversampling count */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(1 << ch1) | + LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */ + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1); + + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2)); +} + +static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc, + unsigned channel) +{ + u32 reg; + unsigned num_samples, val; + + reg = readl(lradc->base + LRADC_CH(channel)); + if (reg & LRADC_CH_ACCUMULATE) + num_samples = lradc->over_sample_cnt; + else + num_samples = 1; + + val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET; + return val / num_samples; +} + +static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc, + unsigned ch1, unsigned ch2) +{ + u32 reg, mask; + unsigned pressure, m1, m2; + + mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2); + reg = readl(lradc->base + LRADC_CTRL1) & mask; + + while (reg != mask) { + reg = readl(lradc->base + LRADC_CTRL1) & mask; + dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg); + } + + m1 = mxs_lradc_read_raw_channel(lradc, ch1); + m2 = mxs_lradc_read_raw_channel(lradc, ch2); + + if (m2 == 0) { + dev_warn(lradc->dev, "Cannot calculate pressure\n"); + return 1 << (LRADC_RESOLUTION - 1); + } + + /* simply scale the value from 0 ... max ADC resolution */ + pressure = m1; + pressure *= (1 << LRADC_RESOLUTION); + pressure /= m2; + + dev_dbg(lradc->dev, "Pressure = %u\n", pressure); + return pressure; +} + +#define TS_CH_XP 2 +#define TS_CH_YP 3 +#define TS_CH_XM 4 +#define TS_CH_YM 5 + +/* + * YP(open)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(weak+) XM(open) + * + * "weak+" means 200k Ohm VDDIO + * (-) means GND + */ +static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc) +{ + /* + * In order to detect a touch event the 'touch detect enable' bit + * enables: + * - a weak pullup to the X+ connector + * - a strong ground at the Y- connector + */ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc), + LRADC_CTRL0); +} + +/* + * YP(meas)--+-------------+ + * | |--+ + * | | | + * YM(open)--+-------------+ | + * +--------------+ + * | | + * XP(+) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_X; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP); + mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(open) XM(meas) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_Y; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM); + mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(meas)--+-------------+ | + * +--------------+ + * | | + * XP(meas) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_PRESSURE; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM); + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP); + mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); +} + +static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) +{ + mxs_lradc_setup_touch_detection(lradc); + + lradc->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); +} + +static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, + LRADC_CTRL1); + mxs_lradc_reg_set(lradc, + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), + LRADC_CTRL1); + /* + * start with the Y-pos, because it uses nearly the same plate + * settings like the touch detection + */ + mxs_lradc_prepare_y_pos(lradc); +} + +static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc) +{ + input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos); + input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos); + input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure); + input_report_key(lradc->ts_input, BTN_TOUCH, 1); + input_sync(lradc->ts_input); +} + +static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc) +{ + mxs_lradc_setup_touch_detection(lradc); + lradc->cur_plate = LRADC_SAMPLE_VALID; + /* + * start a dummy conversion to burn time to settle the signals + * note: we are not interested in the conversion's value + */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1)); + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), + LRADC_CTRL1); + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) | + LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ + LRADC_DELAY(2)); +} + +/* + * in order to avoid false measurements, report only samples where + * the surface is still touched after the position measurement + */ +static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) +{ + /* if it is still touched, report the sample */ + if (valid && mxs_lradc_check_touch_event(lradc)) { + lradc->ts_valid = true; + mxs_lradc_report_ts_event(lradc); + } + + /* if it is even still touched, continue with the next measurement */ + if (mxs_lradc_check_touch_event(lradc)) { + mxs_lradc_prepare_y_pos(lradc); + return; + } + + if (lradc->ts_valid) { + /* signal the release */ + lradc->ts_valid = false; + input_report_key(lradc->ts_input, BTN_TOUCH, 0); + input_sync(lradc->ts_input); + } + + /* if it is released, wait for the next touch via IRQ */ + lradc->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), + LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); +} + +/* touchscreen's state machine */ +static void mxs_lradc_handle_touch(struct mxs_lradc *lradc) +{ + switch (lradc->cur_plate) { + case LRADC_TOUCH: + if (mxs_lradc_check_touch_event(lradc)) + mxs_lradc_start_touch_event(lradc); + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, + LRADC_CTRL1); + return; + + case LRADC_SAMPLE_Y: + lradc->ts_y_pos = + mxs_lradc_read_raw_channel(lradc, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_prepare_x_pos(lradc); + return; + + case LRADC_SAMPLE_X: + lradc->ts_x_pos = + mxs_lradc_read_raw_channel(lradc, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_prepare_pressure(lradc); + return; + + case LRADC_SAMPLE_PRESSURE: + lradc->ts_pressure = + mxs_lradc_read_ts_pressure(lradc, + TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_complete_touch_event(lradc); + return; + + case LRADC_SAMPLE_VALID: + mxs_lradc_finish_touch_event(lradc, 1); + break; + } +} + +/* + * Raw I/O operations + */ +static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + int ret; + + /* + * See if there is no buffered operation in progress. If there is, simply + * bail out. This can be improved to support both buffered and raw IO at + * the same time, yet the code becomes horribly complicated. Therefore I + * applied KISS principle here. + */ + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + reinit_completion(&lradc->completion); + + /* + * No buffered operation in progress, map the channel and trigger it. + * Virtual channel 0 is always used here as the others are always not + * used if doing raw sampling. + */ + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), + LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0); + + /* Enable / disable the divider per requirement */ + if (test_bit(chan, &lradc->is_divided)) + mxs_lradc_reg_set(lradc, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + else + mxs_lradc_reg_clear(lradc, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + + /* Clean the slot's previous content, then set new one. */ + mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), + LRADC_CTRL4); + mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4); + + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0)); + + /* Enable the IRQ and start sampling the channel. */ + mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); + mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0); + + /* Wait for completion on the channel, 1 second max. */ + ret = wait_for_completion_killable_timeout(&lradc->completion, HZ); + if (!ret) + ret = -ETIMEDOUT; + if (ret < 0) + goto err; + + /* Read the data. */ + *val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; + ret = IIO_VAL_INT; + +err: + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); + + mutex_unlock(&lradc->lock); + + return ret; +} + +static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val) +{ + int ret, min, max; + + ret = mxs_lradc_read_single(iio_dev, 8, &min); + if (ret != IIO_VAL_INT) + return ret; + + ret = mxs_lradc_read_single(iio_dev, 9, &max); + if (ret != IIO_VAL_INT) + return ret; + + *val = max - min; + + return IIO_VAL_INT; +} + +static int mxs_lradc_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long m) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + if (chan->type == IIO_TEMP) + return mxs_lradc_read_temp(iio_dev, val); + + return mxs_lradc_read_single(iio_dev, chan->channel, val); + + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_TEMP) { + /* + * From the datasheet, we have to multiply by 1.012 and + * divide by 4 + */ + *val = 0; + *val2 = 253000; + return IIO_VAL_INT_PLUS_MICRO; + } + + *val = lradc->vref_mv[chan->channel]; + *val2 = chan->scan_type.realbits - + test_bit(chan->channel, &lradc->is_divided); + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_OFFSET: + if (chan->type == IIO_TEMP) { + /* + * The calculated value from the ADC is in Kelvin, we + * want Celsius for hwmon so the offset is -273.15 + * The offset is applied before scaling so it is + * actually -213.15 * 4 / 1.012 = -1079.644268 + */ + *val = -1079; + *val2 = 644268; + + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; + + default: + break; + } + + return -EINVAL; +} + +static int mxs_lradc_write_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long m) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + struct mxs_lradc_scale *scale_avail = + lradc->scale_avail[chan->channel]; + int ret; + + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + switch (m) { + case IIO_CHAN_INFO_SCALE: + ret = -EINVAL; + if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && + val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { + /* divider by two disabled */ + clear_bit(chan->channel, &lradc->is_divided); + ret = 0; + } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && + val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { + /* divider by two enabled */ + set_bit(chan->channel, &lradc->is_divided); + ret = 0; + } + + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&lradc->lock); + + return ret; +} + +static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + long m) +{ + return IIO_VAL_INT_PLUS_NANO; +} + +static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev, + struct device_attribute *attr, + char *buf, + int ch) +{ + struct iio_dev *iio = dev_to_iio_dev(dev); + struct mxs_lradc *lradc = iio_priv(iio); + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++) + len += sprintf(buf + len, "%u.%09u ", + lradc->scale_avail[ch][i].integer, + lradc->scale_avail[ch][i].nano); + + len += sprintf(buf + len, "\n"); + + return len; +} + +static ssize_t mxs_lradc_show_scale_available(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); + + return mxs_lradc_show_scale_available_ch(dev, attr, buf, + iio_attr->address); +} + +#define SHOW_SCALE_AVAILABLE_ATTR(ch) \ +static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO, \ + mxs_lradc_show_scale_available, NULL, ch) + +SHOW_SCALE_AVAILABLE_ATTR(0); +SHOW_SCALE_AVAILABLE_ATTR(1); +SHOW_SCALE_AVAILABLE_ATTR(2); +SHOW_SCALE_AVAILABLE_ATTR(3); +SHOW_SCALE_AVAILABLE_ATTR(4); +SHOW_SCALE_AVAILABLE_ATTR(5); +SHOW_SCALE_AVAILABLE_ATTR(6); +SHOW_SCALE_AVAILABLE_ATTR(7); +SHOW_SCALE_AVAILABLE_ATTR(10); +SHOW_SCALE_AVAILABLE_ATTR(11); +SHOW_SCALE_AVAILABLE_ATTR(12); +SHOW_SCALE_AVAILABLE_ATTR(13); +SHOW_SCALE_AVAILABLE_ATTR(14); +SHOW_SCALE_AVAILABLE_ATTR(15); + +static struct attribute *mxs_lradc_attributes[] = { + &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage2_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage3_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage4_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage5_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage6_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage7_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage10_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage11_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage12_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage13_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage14_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage15_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group mxs_lradc_attribute_group = { + .attrs = mxs_lradc_attributes, +}; + +static const struct iio_info mxs_lradc_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = mxs_lradc_read_raw, + .write_raw = mxs_lradc_write_raw, + .write_raw_get_fmt = mxs_lradc_write_raw_get_fmt, + .attrs = &mxs_lradc_attribute_group, +}; + +static int mxs_lradc_ts_open(struct input_dev *dev) +{ + struct mxs_lradc *lradc = input_get_drvdata(dev); + + /* Enable the touch-detect circuitry. */ + mxs_lradc_enable_touch_detection(lradc); + + return 0; +} + +static void mxs_lradc_disable_ts(struct mxs_lradc *lradc) +{ + /* stop all interrupts from firing */ + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); + + /* Power-down touchscreen touch-detect circuitry. */ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); +} + +static void mxs_lradc_ts_close(struct input_dev *dev) +{ + struct mxs_lradc *lradc = input_get_drvdata(dev); + + mxs_lradc_disable_ts(lradc); +} + +static int mxs_lradc_ts_register(struct mxs_lradc *lradc) +{ + struct input_dev *input; + struct device *dev = lradc->dev; + int ret; + + if (!lradc->use_touchscreen) + return 0; + + input = input_allocate_device(); + if (!input) + return -ENOMEM; + + input->name = DRIVER_NAME; + input->id.bustype = BUS_HOST; + input->dev.parent = dev; + input->open = mxs_lradc_ts_open; + input->close = mxs_lradc_ts_close; + + __set_bit(EV_ABS, input->evbit); + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); + input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, + 0, 0); + + lradc->ts_input = input; + input_set_drvdata(input, lradc); + ret = input_register_device(input); + if (ret) + input_free_device(lradc->ts_input); + + return ret; +} + +static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc) +{ + if (!lradc->use_touchscreen) + return; + + mxs_lradc_disable_ts(lradc); + input_unregister_device(lradc->ts_input); +} + +/* + * IRQ Handling + */ +static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) +{ + struct iio_dev *iio = data; + struct mxs_lradc *lradc = iio_priv(iio); + unsigned long reg = readl(lradc->base + LRADC_CTRL1); + u32 clr_irq = mxs_lradc_irq_mask(lradc); + const u32 ts_irq_mask = + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2); + + if (!(reg & mxs_lradc_irq_mask(lradc))) + return IRQ_NONE; + + if (lradc->use_touchscreen && (reg & ts_irq_mask)) { + mxs_lradc_handle_touch(lradc); + + /* Make sure we don't clear the next conversion's interrupt. */ + clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); + } + + if (iio_buffer_enabled(iio)) { + if (reg & lradc->buffer_vchans) + iio_trigger_poll(iio->trig); + } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { + complete(&lradc->completion); + } + + mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1); + + return IRQ_HANDLED; +} + +/* + * Trigger handling + */ +static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *iio = pf->indio_dev; + struct mxs_lradc *lradc = iio_priv(iio); + const u32 chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + unsigned int i, j = 0; + + for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { + lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); + mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j)); + lradc->buffer[j] &= LRADC_CH_VALUE_MASK; + lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; + j++; + } + + iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp); + + iio_trigger_notify_done(iio->trig); + + return IRQ_HANDLED; +} + +static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state) +{ + struct iio_dev *iio = iio_trigger_get_drvdata(trig); + struct mxs_lradc *lradc = iio_priv(iio); + const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; + + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st); + + return 0; +} + +static const struct iio_trigger_ops mxs_lradc_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = &mxs_lradc_configure_trigger, +}; + +static int mxs_lradc_trigger_init(struct iio_dev *iio) +{ + int ret; + struct iio_trigger *trig; + struct mxs_lradc *lradc = iio_priv(iio); + + trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id); + if (!trig) + return -ENOMEM; + + trig->dev.parent = lradc->dev; + iio_trigger_set_drvdata(trig, iio); + trig->ops = &mxs_lradc_trigger_ops; + + ret = iio_trigger_register(trig); + if (ret) { + iio_trigger_free(trig); + return ret; + } + + lradc->trig = trig; + + return 0; +} + +static void mxs_lradc_trigger_remove(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + + iio_trigger_unregister(lradc->trig); + iio_trigger_free(lradc->trig); +} + +static int mxs_lradc_buffer_preenable(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + int ret = 0, chan, ofs = 0; + unsigned long enable = 0; + u32 ctrl4_set = 0; + u32 ctrl4_clr = 0; + u32 ctrl1_irq = 0; + const u32 chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + const int len = bitmap_weight(iio->active_scan_mask, + LRADC_MAX_TOTAL_CHANS); + + if (!len) + return -EINVAL; + + /* + * Lock the driver so raw access can not be done during buffered + * operation. This simplifies the code a lot. + */ + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL); + if (!lradc->buffer) { + ret = -ENOMEM; + goto err_mem; + } + + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear( + lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); + + for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { + ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); + ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); + ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); + mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs)); + bitmap_set(&enable, ofs, 1); + ofs++; + } + + mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | + LRADC_DELAY_KICK, LRADC_DELAY(0)); + mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4); + mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4); + mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1); + mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, + LRADC_DELAY(0)); + + return 0; + +err_mem: + mutex_unlock(&lradc->lock); + return ret; +} + +static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + + mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | + LRADC_DELAY_KICK, LRADC_DELAY(0)); + + mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear( + lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + + kfree(lradc->buffer); + mutex_unlock(&lradc->lock); + + return 0; +} + +static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio, + const unsigned long *mask) +{ + struct mxs_lradc *lradc = iio_priv(iio); + const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS); + int rsvd_chans = 0; + unsigned long rsvd_mask = 0; + + if (lradc->use_touchbutton) + rsvd_mask |= CHAN_MASK_TOUCHBUTTON; + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE) + rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE; + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) + rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE; + + if (lradc->use_touchbutton) + rsvd_chans++; + if (lradc->use_touchscreen) + rsvd_chans += 2; + + /* Test for attempts to map channels with special mode of operation. */ + if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) + return false; + + /* Test for attempts to map more channels then available slots. */ + if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS) + return false; + + return true; +} + +static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = { + .preenable = &mxs_lradc_buffer_preenable, + .postenable = &iio_triggered_buffer_postenable, + .predisable = &iio_triggered_buffer_predisable, + .postdisable = &mxs_lradc_buffer_postdisable, + .validate_scan_mask = &mxs_lradc_validate_scan_mask, +}; + +/* + * Driver initialization + */ + +#define MXS_ADC_CHAN(idx, chan_type, name) { \ + .type = (chan_type), \ + .indexed = 1, \ + .scan_index = (idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .channel = (idx), \ + .address = (idx), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = LRADC_RESOLUTION, \ + .storagebits = 32, \ + }, \ + .datasheet_name = (name), \ +} + +static const struct iio_chan_spec mx23_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), + MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), + MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), + MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), + MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), + MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), + MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"), + MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), + /* Combined Temperature sensors */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = 8, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = 8, + .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, + .datasheet_name = "TEMP_DIE", + }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, + MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL), + MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL), + MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"), + MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"), + MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), + MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), +}; + +static const struct iio_chan_spec mx28_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), + MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), + MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), + MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), + MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), + MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), + MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"), + MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), + /* Combined Temperature sensors */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = 8, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = 8, + .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, + .datasheet_name = "TEMP_DIE", + }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, + MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"), + MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"), + MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"), + MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"), + MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), + MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), +}; + +static int mxs_lradc_hw_init(struct mxs_lradc *lradc) +{ + /* The ADC always uses DELAY CHANNEL 0. */ + const u32 adc_cfg = + (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | + (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); + + int ret = stmp_reset_block(lradc->base); + + if (ret) + return ret; + + /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ + mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0)); + + /* Disable remaining DELAY CHANNELs */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); + + /* Configure the touchscreen type */ + if (lradc->soc == IMX28_LRADC) { + mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) + mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + } + + /* Start internal temperature sensing. */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2); + + return 0; +} + +static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) +{ + int i; + + mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1); + + for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i)); +} + +static const struct of_device_id mxs_lradc_dt_ids[] = { + { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, }, + { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); + +static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc, + struct device_node *lradc_node) +{ + int ret; + u32 ts_wires = 0, adapt; + + ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires", + &ts_wires); + if (ret) + return -ENODEV; /* touchscreen feature disabled */ + + switch (ts_wires) { + case 4: + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE; + break; + case 5: + if (lradc->soc == IMX28_LRADC) { + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE; + break; + } + /* fall through an error message for i.MX23 */ + default: + dev_err(lradc->dev, + "Unsupported number of touchscreen wires (%d)\n", + ts_wires); + return -EINVAL; + } + + if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) { + lradc->over_sample_cnt = 4; + } else { + if (adapt < 1 || adapt > 32) { + dev_err(lradc->dev, "Invalid sample count (%u)\n", + adapt); + return -EINVAL; + } + lradc->over_sample_cnt = adapt; + } + + if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) { + lradc->over_sample_delay = 2; + } else { + if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) { + dev_err(lradc->dev, "Invalid sample delay (%u)\n", + adapt); + return -EINVAL; + } + lradc->over_sample_delay = adapt; + } + + if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) { + lradc->settling_delay = 10; + } else { + if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) { + dev_err(lradc->dev, "Invalid settling delay (%u)\n", + adapt); + return -EINVAL; + } + lradc->settling_delay = adapt; + } + + return 0; +} + +static int mxs_lradc_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(mxs_lradc_dt_ids, &pdev->dev); + const struct mxs_lradc_of_config *of_cfg = + &mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data]; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct mxs_lradc *lradc; + struct iio_dev *iio; + struct resource *iores; + int ret = 0, touch_ret; + int i, s; + u64 scale_uv; + + /* Allocate the IIO device. */ + iio = devm_iio_device_alloc(dev, sizeof(*lradc)); + if (!iio) { + dev_err(dev, "Failed to allocate IIO device\n"); + return -ENOMEM; + } + + lradc = iio_priv(iio); + lradc->soc = (enum mxs_lradc_id)of_id->data; + + /* Grab the memory area */ + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + lradc->dev = &pdev->dev; + lradc->base = devm_ioremap_resource(dev, iores); + if (IS_ERR(lradc->base)) + return PTR_ERR(lradc->base); + + lradc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(lradc->clk)) { + dev_err(dev, "Failed to get the delay unit clock\n"); + return PTR_ERR(lradc->clk); + } + ret = clk_prepare_enable(lradc->clk); + if (ret != 0) { + dev_err(dev, "Failed to enable the delay unit clock\n"); + return ret; + } + + touch_ret = mxs_lradc_probe_touchscreen(lradc, node); + + if (touch_ret == 0) + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; + else + lradc->buffer_vchans = BUFFER_VCHANS_ALL; + + /* Grab all IRQ sources */ + for (i = 0; i < of_cfg->irq_count; i++) { + lradc->irq[i] = platform_get_irq(pdev, i); + if (lradc->irq[i] < 0) { + ret = lradc->irq[i]; + goto err_clk; + } + + ret = devm_request_irq(dev, lradc->irq[i], + mxs_lradc_handle_irq, 0, + of_cfg->irq_name[i], iio); + if (ret) + goto err_clk; + } + + lradc->vref_mv = of_cfg->vref_mv; + + platform_set_drvdata(pdev, iio); + + init_completion(&lradc->completion); + mutex_init(&lradc->lock); + + iio->name = pdev->name; + iio->dev.parent = &pdev->dev; + iio->info = &mxs_lradc_iio_info; + iio->modes = INDIO_DIRECT_MODE; + iio->masklength = LRADC_MAX_TOTAL_CHANS; + + if (lradc->soc == IMX23_LRADC) { + iio->channels = mx23_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec); + } else { + iio->channels = mx28_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec); + } + + ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, + &mxs_lradc_trigger_handler, + &mxs_lradc_buffer_ops); + if (ret) + goto err_clk; + + ret = mxs_lradc_trigger_init(iio); + if (ret) + goto err_trig; + + /* Populate available ADC input ranges */ + for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) { + for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) { + /* + * [s=0] = optional divider by two disabled (default) + * [s=1] = optional divider by two enabled + * + * The scale is calculated by doing: + * Vref >> (realbits - s) + * which multiplies by two on the second component + * of the array. + */ + scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >> + (LRADC_RESOLUTION - s); + lradc->scale_avail[i][s].nano = + do_div(scale_uv, 100000000) * 10; + lradc->scale_avail[i][s].integer = scale_uv; + } + } + + /* Configure the hardware. */ + ret = mxs_lradc_hw_init(lradc); + if (ret) + goto err_dev; + + /* Register the touchscreen input device. */ + if (touch_ret == 0) { + ret = mxs_lradc_ts_register(lradc); + if (ret) + goto err_ts_register; + } + + /* Register IIO device. */ + ret = iio_device_register(iio); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_ts; + } + + return 0; + +err_ts: + mxs_lradc_ts_unregister(lradc); +err_ts_register: + mxs_lradc_hw_stop(lradc); +err_dev: + mxs_lradc_trigger_remove(iio); +err_trig: + iio_triggered_buffer_cleanup(iio); +err_clk: + clk_disable_unprepare(lradc->clk); + return ret; +} + +static int mxs_lradc_remove(struct platform_device *pdev) +{ + struct iio_dev *iio = platform_get_drvdata(pdev); + struct mxs_lradc *lradc = iio_priv(iio); + + iio_device_unregister(iio); + mxs_lradc_ts_unregister(lradc); + mxs_lradc_hw_stop(lradc); + mxs_lradc_trigger_remove(iio); + iio_triggered_buffer_cleanup(iio); + + clk_disable_unprepare(lradc->clk); + + return 0; +} + +static struct platform_driver mxs_lradc_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = mxs_lradc_dt_ids, + }, + .probe = mxs_lradc_probe, + .remove = mxs_lradc_remove, +}; + +module_platform_driver(mxs_lradc_driver); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("Freescale MXS LRADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index f42eb8a..2bbf0c5 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -534,7 +534,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev) } ret = request_threaded_irq(adc->irq, NULL, palmas_gpadc_irq, - IRQF_ONESHOT | IRQF_EARLY_RESUME, dev_name(adc->dev), + IRQF_ONESHOT, dev_name(adc->dev), adc); if (ret < 0) { dev_err(adc->dev, @@ -549,7 +549,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev) adc->irq_auto_0 = platform_get_irq(pdev, 1); ret = request_threaded_irq(adc->irq_auto_0, NULL, palmas_gpadc_irq_auto, - IRQF_ONESHOT | IRQF_EARLY_RESUME, + IRQF_ONESHOT, "palmas-adc-auto-0", adc); if (ret < 0) { dev_err(adc->dev, "request auto0 irq %d failed: %d\n", @@ -565,7 +565,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev) adc->irq_auto_1 = platform_get_irq(pdev, 2); ret = request_threaded_irq(adc->irq_auto_1, NULL, palmas_gpadc_irq_auto, - IRQF_ONESHOT | IRQF_EARLY_RESUME, + IRQF_ONESHOT, "palmas-adc-auto-1", adc); if (ret < 0) { dev_err(adc->dev, "request auto1 irq %d failed: %d\n", diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index 2c8374f..ecbc121 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -73,7 +73,7 @@ static int adc081c_probe(struct i2c_client *client, int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; iio = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!iio) diff --git b/drivers/iio/adc/ti-adc0832.c b/drivers/iio/adc/ti-adc0832.c new file mode 100644 index 0000000..0afeac0 --- /dev/null +++ b/drivers/iio/adc/ti-adc0832.c @@ -0,0 +1,288 @@ +/* + * ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver + * + * Copyright (c) 2016 Akinobu Mita + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Datasheet: http://www.ti.com/lit/ds/symlink/adc0832-n.pdf + */ + +#include +#include +#include +#include + +enum { + adc0831, + adc0832, + adc0834, + adc0838, +}; + +struct adc0832 { + struct spi_device *spi; + struct regulator *reg; + struct mutex lock; + u8 mux_bits; + + u8 tx_buf[2] ____cacheline_aligned; + u8 rx_buf[2]; +}; + +#define ADC0832_VOLTAGE_CHANNEL(chan) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + } + +#define ADC0832_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (chan1), \ + .channel2 = (chan2), \ + .differential = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + } + +static const struct iio_chan_spec adc0831_channels[] = { + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), +}; + +static const struct iio_chan_spec adc0832_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), +}; + +static const struct iio_chan_spec adc0834_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL(2), + ADC0832_VOLTAGE_CHANNEL(3), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), + ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3), + ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2), +}; + +static const struct iio_chan_spec adc0838_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL(2), + ADC0832_VOLTAGE_CHANNEL(3), + ADC0832_VOLTAGE_CHANNEL(4), + ADC0832_VOLTAGE_CHANNEL(5), + ADC0832_VOLTAGE_CHANNEL(6), + ADC0832_VOLTAGE_CHANNEL(7), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), + ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3), + ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2), + ADC0832_VOLTAGE_CHANNEL_DIFF(4, 5), + ADC0832_VOLTAGE_CHANNEL_DIFF(5, 4), + ADC0832_VOLTAGE_CHANNEL_DIFF(6, 7), + ADC0832_VOLTAGE_CHANNEL_DIFF(7, 6), +}; + +static int adc0831_adc_conversion(struct adc0832 *adc) +{ + struct spi_device *spi = adc->spi; + int ret; + + ret = spi_read(spi, &adc->rx_buf, 2); + if (ret) + return ret; + + /* + * Skip TRI-STATE and a leading zero + */ + return (adc->rx_buf[0] << 2 & 0xff) | (adc->rx_buf[1] >> 6); +} + +static int adc0832_adc_conversion(struct adc0832 *adc, int channel, + bool differential) +{ + struct spi_device *spi = adc->spi; + struct spi_transfer xfer = { + .tx_buf = adc->tx_buf, + .rx_buf = adc->rx_buf, + .len = 2, + }; + int ret; + + if (!adc->mux_bits) + return adc0831_adc_conversion(adc); + + /* start bit */ + adc->tx_buf[0] = 1 << (adc->mux_bits + 1); + /* single-ended or differential */ + adc->tx_buf[0] |= differential ? 0 : (1 << adc->mux_bits); + /* odd / sign */ + adc->tx_buf[0] |= (channel % 2) << (adc->mux_bits - 1); + /* select */ + if (adc->mux_bits > 1) + adc->tx_buf[0] |= channel / 2; + + /* align Data output BIT7 (MSB) to 8-bit boundary */ + adc->tx_buf[0] <<= 1; + + ret = spi_sync_transfer(spi, &xfer, 1); + if (ret) + return ret; + + return adc->rx_buf[1]; +} + +static int adc0832_read_raw(struct iio_dev *iio, + struct iio_chan_spec const *channel, int *value, + int *shift, long mask) +{ + struct adc0832 *adc = iio_priv(iio); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&adc->lock); + *value = adc0832_adc_conversion(adc, channel->channel, + channel->differential); + mutex_unlock(&adc->lock); + if (*value < 0) + return *value; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *value = regulator_get_voltage(adc->reg); + if (*value < 0) + return *value; + + /* convert regulator output voltage to mV */ + *value /= 1000; + *shift = 8; + + return IIO_VAL_FRACTIONAL_LOG2; + } + + return -EINVAL; +} + +static const struct iio_info adc0832_info = { + .read_raw = adc0832_read_raw, + .driver_module = THIS_MODULE, +}; + +static int adc0832_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adc0832 *adc; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + + adc = iio_priv(indio_dev); + adc->spi = spi; + mutex_init(&adc->lock); + + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adc0832_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + switch (spi_get_device_id(spi)->driver_data) { + case adc0831: + adc->mux_bits = 0; + indio_dev->channels = adc0831_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0831_channels); + break; + case adc0832: + adc->mux_bits = 1; + indio_dev->channels = adc0832_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0832_channels); + break; + case adc0834: + adc->mux_bits = 2; + indio_dev->channels = adc0834_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0834_channels); + break; + case adc0838: + adc->mux_bits = 3; + indio_dev->channels = adc0838_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0838_channels); + break; + default: + return -EINVAL; + } + + adc->reg = devm_regulator_get(&spi->dev, "vref"); + if (IS_ERR(adc->reg)) + return PTR_ERR(adc->reg); + + ret = regulator_enable(adc->reg); + if (ret) + return ret; + + spi_set_drvdata(spi, indio_dev); + + ret = iio_device_register(indio_dev); + if (ret) + regulator_disable(adc->reg); + + return ret; +} + +static int adc0832_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adc0832 *adc = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + regulator_disable(adc->reg); + + return 0; +} + +#ifdef CONFIG_OF + +static const struct of_device_id adc0832_dt_ids[] = { + { .compatible = "ti,adc0831", }, + { .compatible = "ti,adc0832", }, + { .compatible = "ti,adc0834", }, + { .compatible = "ti,adc0838", }, + {} +}; +MODULE_DEVICE_TABLE(of, adc0832_dt_ids); + +#endif + +static const struct spi_device_id adc0832_id[] = { + { "adc0831", adc0831 }, + { "adc0832", adc0832 }, + { "adc0834", adc0834 }, + { "adc0838", adc0838 }, + {} +}; +MODULE_DEVICE_TABLE(spi, adc0832_id); + +static struct spi_driver adc0832_driver = { + .driver = { + .name = "adc0832", + .of_match_table = of_match_ptr(adc0832_dt_ids), + }, + .probe = adc0832_probe, + .remove = adc0832_remove, + .id_table = adc0832_id, +}; +module_spi_driver(adc0832_driver); + +MODULE_AUTHOR("Akinobu Mita "); +MODULE_DESCRIPTION("ADC0831/ADC0832/ADC0834/ADC0838 driver"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c new file mode 100644 index 0000000..73cbf0b --- /dev/null +++ b/drivers/iio/adc/ti-ads1015.c @@ -0,0 +1,612 @@ +/* + * ADS1015 - Texas Instruments Analog-to-Digital Converter + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for ADS1015 ADC 7-bit I2C slave address: + * * 0x48 - ADDR connected to Ground + * * 0x49 - ADDR connected to Vdd + * * 0x4A - ADDR connected to SDA + * * 0x4B - ADDR connected to SCL + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include + +#define ADS1015_DRV_NAME "ads1015" + +#define ADS1015_CONV_REG 0x00 +#define ADS1015_CFG_REG 0x01 + +#define ADS1015_CFG_DR_SHIFT 5 +#define ADS1015_CFG_MOD_SHIFT 8 +#define ADS1015_CFG_PGA_SHIFT 9 +#define ADS1015_CFG_MUX_SHIFT 12 + +#define ADS1015_CFG_DR_MASK GENMASK(7, 5) +#define ADS1015_CFG_MOD_MASK BIT(8) +#define ADS1015_CFG_PGA_MASK GENMASK(11, 9) +#define ADS1015_CFG_MUX_MASK GENMASK(14, 12) + +/* device operating modes */ +#define ADS1015_CONTINUOUS 0 +#define ADS1015_SINGLESHOT 1 + +#define ADS1015_SLEEP_DELAY_MS 2000 +#define ADS1015_DEFAULT_PGA 2 +#define ADS1015_DEFAULT_DATA_RATE 4 +#define ADS1015_DEFAULT_CHAN 0 + +enum ads1015_channels { + ADS1015_AIN0_AIN1 = 0, + ADS1015_AIN0_AIN3, + ADS1015_AIN1_AIN3, + ADS1015_AIN2_AIN3, + ADS1015_AIN0, + ADS1015_AIN1, + ADS1015_AIN2, + ADS1015_AIN3, + ADS1015_TIMESTAMP, +}; + +static const unsigned int ads1015_data_rate[] = { + 128, 250, 490, 920, 1600, 2400, 3300, 3300 +}; + +static const struct { + int scale; + int uscale; +} ads1015_scale[] = { + {3, 0}, + {2, 0}, + {1, 0}, + {0, 500000}, + {0, 250000}, + {0, 125000}, + {0, 125000}, + {0, 125000}, +}; + +#define ADS1015_V_CHAN(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +#define ADS1015_V_DIFF_CHAN(_chan, _chan2, _addr) { \ + .type = IIO_VOLTAGE, \ + .differential = 1, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .channel2 = _chan2, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +struct ads1015_data { + struct regmap *regmap; + /* + * Protects ADC ops, e.g: concurrent sysfs/buffered + * data reads, configuration updates + */ + struct mutex lock; + struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; +}; + +static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return (reg == ADS1015_CFG_REG); +} + +static const struct regmap_config ads1015_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ADS1015_CFG_REG, + .writeable_reg = ads1015_is_writeable_reg, +}; + +static const struct iio_chan_spec ads1015_channels[] = { + ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1), + ADS1015_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3), + ADS1015_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3), + ADS1015_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3), + ADS1015_V_CHAN(0, ADS1015_AIN0), + ADS1015_V_CHAN(1, ADS1015_AIN1), + ADS1015_V_CHAN(2, ADS1015_AIN2), + ADS1015_V_CHAN(3, ADS1015_AIN3), + IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), +}; + +static int ads1015_set_power_state(struct ads1015_data *data, bool on) +{ + int ret; + struct device *dev = regmap_get_device(data->regmap); + + if (on) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + pm_runtime_put_noidle(dev); + } else { + pm_runtime_mark_last_busy(dev); + ret = pm_runtime_put_autosuspend(dev); + } + + return ret; +} + +static +int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) +{ + int ret, pga, dr, conv_time; + bool change; + + if (chan < 0 || chan >= ADS1015_CHANNELS) + return -EINVAL; + + pga = data->channel_data[chan].pga; + dr = data->channel_data[chan].data_rate; + + ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MUX_MASK | + ADS1015_CFG_PGA_MASK, + chan << ADS1015_CFG_MUX_SHIFT | + pga << ADS1015_CFG_PGA_SHIFT, + &change); + if (ret < 0) + return ret; + + if (change) { + conv_time = DIV_ROUND_UP(USEC_PER_SEC, ads1015_data_rate[dr]); + usleep_range(conv_time, conv_time + 1); + } + + return regmap_read(data->regmap, ADS1015_CONV_REG, val); +} + +static irqreturn_t ads1015_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ads1015_data *data = iio_priv(indio_dev); + s16 buf[8]; /* 1x s16 ADC val + 3x s16 padding + 4x s16 timestamp */ + int chan, ret, res; + + memset(buf, 0, sizeof(buf)); + + mutex_lock(&data->lock); + chan = find_first_bit(indio_dev->active_scan_mask, + indio_dev->masklength); + ret = ads1015_get_adc_result(data, chan, &res); + if (ret < 0) { + mutex_unlock(&data->lock); + goto err; + } + + buf[0] = res; + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int ads1015_set_scale(struct ads1015_data *data, int chan, + int scale, int uscale) +{ + int i, ret, rindex = -1; + + for (i = 0; i < ARRAY_SIZE(ads1015_scale); i++) + if (ads1015_scale[i].scale == scale && + ads1015_scale[i].uscale == uscale) { + rindex = i; + break; + } + if (rindex < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_PGA_MASK, + rindex << ADS1015_CFG_PGA_SHIFT); + if (ret < 0) + return ret; + + data->channel_data[chan].pga = rindex; + + return 0; +} + +static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate) +{ + int i, ret, rindex = -1; + + for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) + if (ads1015_data_rate[i] == rate) { + rindex = i; + break; + } + if (rindex < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_DR_MASK, + rindex << ADS1015_CFG_DR_SHIFT); + if (ret < 0) + return ret; + + data->channel_data[chan].data_rate = rindex; + + return 0; +} + +static int ads1015_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret, idx; + struct ads1015_data *data = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + mutex_lock(&data->lock); + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) { + ret = -EBUSY; + break; + } + + ret = ads1015_set_power_state(data, true); + if (ret < 0) + break; + + ret = ads1015_get_adc_result(data, chan->address, val); + if (ret < 0) { + ads1015_set_power_state(data, false); + break; + } + + /* 12 bit res, D0 is bit 4 in conversion register */ + *val = sign_extend32(*val >> 4, 11); + + ret = ads1015_set_power_state(data, false); + if (ret < 0) + break; + + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + idx = data->channel_data[chan->address].pga; + *val = ads1015_scale[idx].scale; + *val2 = ads1015_scale[idx].uscale; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + idx = data->channel_data[chan->address].data_rate; + *val = ads1015_data_rate[idx]; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int ads1015_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ads1015_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->lock); + switch (mask) { + case IIO_CHAN_INFO_SCALE: + ret = ads1015_set_scale(data, chan->address, val, val2); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = ads1015_set_data_rate(data, chan->address, val); + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + + return ret; +} + +static int ads1015_buffer_preenable(struct iio_dev *indio_dev) +{ + return ads1015_set_power_state(iio_priv(indio_dev), true); +} + +static int ads1015_buffer_postdisable(struct iio_dev *indio_dev) +{ + return ads1015_set_power_state(iio_priv(indio_dev), false); +} + +static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = { + .preenable = ads1015_buffer_preenable, + .postenable = iio_triggered_buffer_postenable, + .predisable = iio_triggered_buffer_predisable, + .postdisable = ads1015_buffer_postdisable, + .validate_scan_mask = &iio_validate_scan_mask_onehot, +}; + +static IIO_CONST_ATTR(scale_available, "3 2 1 0.5 0.25 0.125"); +static IIO_CONST_ATTR(sampling_frequency_available, + "128 250 490 920 1600 2400 3300"); + +static struct attribute *ads1015_attributes[] = { + &iio_const_attr_scale_available.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ads1015_attribute_group = { + .attrs = ads1015_attributes, +}; + +static const struct iio_info ads1015_info = { + .driver_module = THIS_MODULE, + .read_raw = ads1015_read_raw, + .write_raw = ads1015_write_raw, + .attrs = &ads1015_attribute_group, +}; + +#ifdef CONFIG_OF +static int ads1015_get_channels_config_of(struct i2c_client *client) +{ + struct ads1015_data *data = i2c_get_clientdata(client); + struct device_node *node; + + if (!client->dev.of_node || + !of_get_next_child(client->dev.of_node, NULL)) + return -EINVAL; + + for_each_child_of_node(client->dev.of_node, node) { + u32 pval; + unsigned int channel; + unsigned int pga = ADS1015_DEFAULT_PGA; + unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE; + + if (of_property_read_u32(node, "reg", &pval)) { + dev_err(&client->dev, "invalid reg on %s\n", + node->full_name); + continue; + } + + channel = pval; + if (channel >= ADS1015_CHANNELS) { + dev_err(&client->dev, + "invalid channel index %d on %s\n", + channel, node->full_name); + continue; + } + + if (!of_property_read_u32(node, "ti,gain", &pval)) { + pga = pval; + if (pga > 6) { + dev_err(&client->dev, "invalid gain on %s\n", + node->full_name); + return -EINVAL; + } + } + + if (!of_property_read_u32(node, "ti,datarate", &pval)) { + data_rate = pval; + if (data_rate > 7) { + dev_err(&client->dev, + "invalid data_rate on %s\n", + node->full_name); + return -EINVAL; + } + } + + data->channel_data[channel].pga = pga; + data->channel_data[channel].data_rate = data_rate; + } + + return 0; +} +#endif + +static void ads1015_get_channels_config(struct i2c_client *client) +{ + unsigned int k; + + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ads1015_data *data = iio_priv(indio_dev); + struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev); + + /* prefer platform data */ + if (pdata) { + memcpy(data->channel_data, pdata->channel_data, + sizeof(data->channel_data)); + return; + } + +#ifdef CONFIG_OF + if (!ads1015_get_channels_config_of(client)) + return; +#endif + /* fallback on default configuration */ + for (k = 0; k < ADS1015_CHANNELS; ++k) { + data->channel_data[k].pga = ADS1015_DEFAULT_PGA; + data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE; + } +} + +static int ads1015_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ads1015_data *data; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &ads1015_info; + indio_dev->name = ADS1015_DRV_NAME; + indio_dev->channels = ads1015_channels; + indio_dev->num_channels = ARRAY_SIZE(ads1015_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + /* we need to keep this ABI the same as used by hwmon ADS1015 driver */ + ads1015_get_channels_config(client); + + data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "Failed to allocate register map\n"); + return PTR_ERR(data->regmap); + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + ads1015_trigger_handler, + &ads1015_buffer_setup_ops); + if (ret < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + return ret; + } + ret = pm_runtime_set_active(&client->dev); + if (ret) + goto err_buffer_cleanup; + pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_enable(&client->dev); + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "Failed to register IIO device\n"); + goto err_buffer_cleanup; + } + + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + + return ret; +} + +static int ads1015_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ads1015_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + + iio_triggered_buffer_cleanup(indio_dev); + + /* power down single shot mode */ + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT); +} + +#ifdef CONFIG_PM +static int ads1015_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ads1015_data *data = iio_priv(indio_dev); + + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT); +} + +static int ads1015_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ads1015_data *data = iio_priv(indio_dev); + + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT); +} +#endif + +static const struct dev_pm_ops ads1015_pm_ops = { + SET_RUNTIME_PM_OPS(ads1015_runtime_suspend, + ads1015_runtime_resume, NULL) +}; + +static const struct i2c_device_id ads1015_id[] = { + {"ads1015", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ads1015_id); + +static struct i2c_driver ads1015_driver = { + .driver = { + .name = ADS1015_DRV_NAME, + .pm = &ads1015_pm_ops, + }, + .probe = ads1015_probe, + .remove = ads1015_remove, + .id_table = ads1015_id, +}; + +module_i2c_driver(ads1015_driver); + +MODULE_AUTHOR("Daniel Baluta "); +MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c index ebdb838..9fabed4 100644 --- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c +++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c @@ -93,12 +93,7 @@ static void iio_dmaengine_buffer_abort(struct iio_dma_buffer_queue *queue) struct dmaengine_buffer *dmaengine_buffer = iio_buffer_to_dmaengine_buffer(&queue->buffer); - dmaengine_terminate_all(dmaengine_buffer->chan); - /* FIXME: There is a slight chance of a race condition here. - * dmaengine_terminate_all() does not guarantee that all transfer - * callbacks have finished running. Need to introduce a - * dmaengine_terminate_all_sync(). - */ + dmaengine_terminate_sync(dmaengine_buffer->chan); iio_dma_buffer_block_list_abort(queue, &dmaengine_buffer->active); } diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index f16de61..f73290f 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -4,6 +4,20 @@ menu "Chemical Sensors" +config ATLAS_PH_SENSOR + tristate "Atlas Scientific OEM pH-SM sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IRQ_WORK + help + Say Y here to build I2C interface support for the Atlas + Scientific OEM pH-SM sensor. + + To compile this driver as module, choose M here: the + module will be called atlas-ph-sensor. + config IAQCORE tristate "AMS iAQ-Core VOC sensors" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 167861f..b02202b 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -3,5 +3,6 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-ph-sensor.o obj-$(CONFIG_IAQCORE) += ams-iaq-core.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git b/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c new file mode 100644 index 0000000..62b37cd --- /dev/null +++ b/drivers/iio/chemical/atlas-ph-sensor.c @@ -0,0 +1,509 @@ +/* + * atlas-ph-sensor.c - Support for Atlas Scientific OEM pH-SM sensor + * + * Copyright (C) 2015 Matt Ranostay + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ATLAS_REGMAP_NAME "atlas_ph_regmap" +#define ATLAS_DRV_NAME "atlas_ph" + +#define ATLAS_REG_DEV_TYPE 0x00 +#define ATLAS_REG_DEV_VERSION 0x01 + +#define ATLAS_REG_INT_CONTROL 0x04 +#define ATLAS_REG_INT_CONTROL_EN BIT(3) + +#define ATLAS_REG_PWR_CONTROL 0x06 + +#define ATLAS_REG_CALIB_STATUS 0x0d +#define ATLAS_REG_CALIB_STATUS_MASK 0x07 +#define ATLAS_REG_CALIB_STATUS_LOW BIT(0) +#define ATLAS_REG_CALIB_STATUS_MID BIT(1) +#define ATLAS_REG_CALIB_STATUS_HIGH BIT(2) + +#define ATLAS_REG_TEMP_DATA 0x0e +#define ATLAS_REG_PH_DATA 0x16 + +#define ATLAS_PH_INT_TIME_IN_US 450000 + +struct atlas_data { + struct i2c_client *client; + struct iio_trigger *trig; + struct regmap *regmap; + struct irq_work work; + + __be32 buffer[4]; /* 32-bit pH data + 32-bit pad + 64-bit timestamp */ +}; + +static const struct regmap_range atlas_volatile_ranges[] = { + regmap_reg_range(ATLAS_REG_INT_CONTROL, ATLAS_REG_INT_CONTROL), + regmap_reg_range(ATLAS_REG_PH_DATA, ATLAS_REG_PH_DATA + 4), +}; + +static const struct regmap_access_table atlas_volatile_table = { + .yes_ranges = atlas_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(atlas_volatile_ranges), +}; + +static const struct regmap_config atlas_regmap_config = { + .name = ATLAS_REGMAP_NAME, + + .reg_bits = 8, + .val_bits = 8, + + .volatile_table = &atlas_volatile_table, + .max_register = ATLAS_REG_PH_DATA + 4, + .cache_type = REGCACHE_RBTREE, +}; + +static const struct iio_chan_spec atlas_channels[] = { + { + .type = IIO_PH, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), + { + .type = IIO_TEMP, + .address = ATLAS_REG_TEMP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .output = 1, + .scan_index = -1 + }, +}; + +static int atlas_set_powermode(struct atlas_data *data, int on) +{ + return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on); +} + +static int atlas_set_interrupt(struct atlas_data *data, bool state) +{ + return regmap_update_bits(data->regmap, ATLAS_REG_INT_CONTROL, + ATLAS_REG_INT_CONTROL_EN, + state ? ATLAS_REG_INT_CONTROL_EN : 0); +} + +static int atlas_buffer_postenable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = iio_triggered_buffer_postenable(indio_dev); + if (ret) + return ret; + + ret = pm_runtime_get_sync(&data->client->dev); + if (ret < 0) { + pm_runtime_put_noidle(&data->client->dev); + return ret; + } + + return atlas_set_interrupt(data, true); +} + +static int atlas_buffer_predisable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = iio_triggered_buffer_predisable(indio_dev); + if (ret) + return ret; + + ret = atlas_set_interrupt(data, false); + if (ret) + return ret; + + pm_runtime_mark_last_busy(&data->client->dev); + return pm_runtime_put_autosuspend(&data->client->dev); +} + +static const struct iio_trigger_ops atlas_interrupt_trigger_ops = { + .owner = THIS_MODULE, +}; + +static const struct iio_buffer_setup_ops atlas_buffer_setup_ops = { + .postenable = atlas_buffer_postenable, + .predisable = atlas_buffer_predisable, +}; + +static void atlas_work_handler(struct irq_work *work) +{ + struct atlas_data *data = container_of(work, struct atlas_data, work); + + iio_trigger_poll(data->trig); +} + +static irqreturn_t atlas_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, + (u8 *) &data->buffer, sizeof(data->buffer[0])); + + if (!ret) + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns()); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t atlas_interrupt_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct atlas_data *data = iio_priv(indio_dev); + + irq_work_queue(&data->work); + + return IRQ_HANDLED; +} + +static int atlas_read_ph_measurement(struct atlas_data *data, __be32 *val) +{ + struct device *dev = &data->client->dev; + int suspended = pm_runtime_suspended(dev); + int ret; + + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } + + if (suspended) + usleep_range(ATLAS_PH_INT_TIME_IN_US, + ATLAS_PH_INT_TIME_IN_US + 100000); + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, + (u8 *) val, sizeof(*val)); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static int atlas_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + int ret; + __be32 reg; + + switch (chan->type) { + case IIO_TEMP: + ret = regmap_bulk_read(data->regmap, chan->address, + (u8 *) ®, sizeof(reg)); + break; + case IIO_PH: + mutex_lock(&indio_dev->mlock); + + if (iio_buffer_enabled(indio_dev)) + ret = -EBUSY; + else + ret = atlas_read_ph_measurement(data, ®); + + mutex_unlock(&indio_dev->mlock); + break; + default: + ret = -EINVAL; + } + + if (!ret) { + *val = be32_to_cpu(reg); + ret = IIO_VAL_INT; + } + return ret; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 1; /* 0.01 */ + *val2 = 100; + break; + case IIO_PH: + *val = 1; /* 0.001 */ + *val2 = 1000; + break; + default: + return -EINVAL; + } + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int atlas_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + __be32 reg = cpu_to_be32(val); + + if (val2 != 0 || val < 0 || val > 20000) + return -EINVAL; + + if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_TEMP) + return -EINVAL; + + return regmap_bulk_write(data->regmap, chan->address, + ®, sizeof(reg)); +} + +static const struct iio_info atlas_info = { + .driver_module = THIS_MODULE, + .read_raw = atlas_read_raw, + .write_raw = atlas_write_raw, +}; + +static int atlas_check_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, ATLAS_REG_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_CALIB_STATUS_LOW)) + dev_warn(dev, "device missing low point calibration\n"); + + if (!(val & ATLAS_REG_CALIB_STATUS_MID)) + dev_warn(dev, "device missing mid point calibration\n"); + + if (!(val & ATLAS_REG_CALIB_STATUS_HIGH)) + dev_warn(dev, "device missing high point calibration\n"); + + return 0; +}; + +static int atlas_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atlas_data *data; + struct iio_trigger *trig; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + indio_dev->info = &atlas_info; + indio_dev->name = ATLAS_DRV_NAME; + indio_dev->channels = atlas_channels; + indio_dev->num_channels = ARRAY_SIZE(atlas_channels); + indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE; + indio_dev->dev.parent = &client->dev; + + trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + + if (!trig) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + data->trig = trig; + trig->dev.parent = indio_dev->dev.parent; + trig->ops = &atlas_interrupt_trigger_ops; + iio_trigger_set_drvdata(trig, indio_dev); + + i2c_set_clientdata(client, indio_dev); + + data->regmap = devm_regmap_init_i2c(client, &atlas_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap initialization failed\n"); + return PTR_ERR(data->regmap); + } + + ret = pm_runtime_set_active(&client->dev); + if (ret) + return ret; + + if (client->irq <= 0) { + dev_err(&client->dev, "no valid irq defined\n"); + return -EINVAL; + } + + ret = atlas_check_calibration(data); + if (ret) + return ret; + + ret = iio_trigger_register(trig); + if (ret) { + dev_err(&client->dev, "failed to register trigger\n"); + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &atlas_trigger_handler, &atlas_buffer_setup_ops); + if (ret) { + dev_err(&client->dev, "cannot setup iio trigger\n"); + goto unregister_trigger; + } + + init_irq_work(&data->work, atlas_work_handler); + + /* interrupt pin toggles on new conversion */ + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, atlas_interrupt_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "atlas_irq", + indio_dev); + if (ret) { + dev_err(&client->dev, "request irq (%d) failed\n", client->irq); + goto unregister_buffer; + } + + ret = atlas_set_powermode(data, 1); + if (ret) { + dev_err(&client->dev, "cannot power device on"); + goto unregister_buffer; + } + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, 2500); + pm_runtime_use_autosuspend(&client->dev); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&client->dev, "unable to register device\n"); + goto unregister_pm; + } + + return 0; + +unregister_pm: + pm_runtime_disable(&client->dev); + atlas_set_powermode(data, 0); + +unregister_buffer: + iio_triggered_buffer_cleanup(indio_dev); + +unregister_trigger: + iio_trigger_unregister(data->trig); + + return ret; +} + +static int atlas_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct atlas_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + iio_trigger_unregister(data->trig); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + + return atlas_set_powermode(data, 0); +} + +#ifdef CONFIG_PM +static int atlas_runtime_suspend(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 0); +} + +static int atlas_runtime_resume(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 1); +} +#endif + +static const struct dev_pm_ops atlas_pm_ops = { + SET_RUNTIME_PM_OPS(atlas_runtime_suspend, + atlas_runtime_resume, NULL) +}; + +static const struct i2c_device_id atlas_id[] = { + { "atlas-ph-sm", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, atlas_id); + +static const struct of_device_id atlas_dt_ids[] = { + { .compatible = "atlas,ph-sm" }, + { } +}; +MODULE_DEVICE_TABLE(of, atlas_dt_ids); + +static struct i2c_driver atlas_driver = { + .driver = { + .name = ATLAS_DRV_NAME, + .of_match_table = of_match_ptr(atlas_dt_ids), + .pm = &atlas_pm_ops, + }, + .probe = atlas_probe, + .remove = atlas_remove, + .id_table = atlas_id, +}; +module_i2c_driver(atlas_driver); + +MODULE_AUTHOR("Matt Ranostay "); +MODULE_DESCRIPTION("Atlas Scientific pH-SM sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c index b8b8049..652649d 100644 --- a/drivers/iio/chemical/vz89x.c +++ b/drivers/iio/chemical/vz89x.c @@ -249,7 +249,7 @@ static int vz89x_probe(struct i2c_client *client, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) data->xfer = vz89x_smbus_xfer; else - return -ENOTSUPP; + return -EOPNOTSUPP; i2c_set_clientdata(client, indio_dev); data->client = client; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 8447c31..f5a2d44 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -18,13 +18,15 @@ #include #include +#include "st_sensors_core.h" + static inline u32 st_sensors_get_unaligned_le24(const u8 *p) { return (s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8; } -static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, - u8 reg_addr, u8 mask, u8 data) +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data) { int err; u8 new_data; diff --git b/drivers/iio/common/st_sensors/st_sensors_core.h b/drivers/iio/common/st_sensors/st_sensors_core.h new file mode 100644 index 0000000..cd88098 --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_core.h @@ -0,0 +1,8 @@ +/* + * Local functions in the ST Sensors core + */ +#ifndef __ST_SENSORS_CORE_H +#define __ST_SENSORS_CORE_H +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data); +#endif diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 3e90704..6a8c983 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -14,32 +14,65 @@ #include #include #include - #include - +#include "st_sensors_core.h" int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) { - int err; + int err, irq; struct st_sensor_data *sdata = iio_priv(indio_dev); + unsigned long irq_trig; sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name); if (sdata->trig == NULL) { - err = -ENOMEM; dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n"); - goto iio_trigger_alloc_error; + return -ENOMEM; } - err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), + irq = sdata->get_irq_data_ready(indio_dev); + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + /* + * If the IRQ is triggered on falling edge, we need to mark the + * interrupt as active low, if the hardware supports this. + */ + if (irq_trig == IRQF_TRIGGER_FALLING) { + if (!sdata->sensor_settings->drdy_irq.addr_ihl) { + dev_err(&indio_dev->dev, + "falling edge specified for IRQ but hardware " + "only support rising edge, will request " + "rising edge\n"); + irq_trig = IRQF_TRIGGER_RISING; + } else { + /* Set up INT active low i.e. falling edge */ + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor_settings->drdy_irq.addr_ihl, + sdata->sensor_settings->drdy_irq.mask_ihl, 1); + if (err < 0) + goto iio_trigger_free; + dev_info(&indio_dev->dev, + "interrupts on the falling edge\n"); + } + } else if (irq_trig == IRQF_TRIGGER_RISING) { + dev_info(&indio_dev->dev, + "interrupts on the rising edge\n"); + + } else { + dev_err(&indio_dev->dev, + "unsupported IRQ trigger specified (%lx), only " + "rising and falling edges supported, enforce " + "rising edge\n", irq_trig); + irq_trig = IRQF_TRIGGER_RISING; + } + err = request_threaded_irq(irq, iio_trigger_generic_data_rdy_poll, NULL, - IRQF_TRIGGER_RISING, + irq_trig, sdata->trig->name, sdata->trig); if (err) { dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n"); - goto request_irq_error; + goto iio_trigger_free; } iio_trigger_set_drvdata(sdata->trig, indio_dev); @@ -57,9 +90,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, iio_trigger_register_error: free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig); -request_irq_error: +iio_trigger_free: iio_trigger_free(sdata->trig); -iio_trigger_alloc_error: return err; } EXPORT_SYMBOL(st_sensors_allocate_trigger); diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index e701e28..a995139 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -10,8 +10,10 @@ config AD5064 depends on (SPI_MASTER && I2C!=m) || I2C help Say yes here to build support for Analog Devices AD5024, AD5025, AD5044, - AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, AD5648, AD5666, AD5668, - AD5669R Digital to Analog Converter. + AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, AD5627, AD5627R, + AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, AD5666, + AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616, + LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to Analog Converter. To compile this driver as a module, choose M here: the module will be called ad5064. @@ -111,6 +113,16 @@ config AD5755 To compile this driver as a module, choose M here: the module will be called ad5755. +config AD5761 + tristate "Analog Devices AD5761/61R/21/21R DAC driver" + depends on SPI_MASTER + help + Say yes here to build support for Analog Devices AD5761, AD5761R, AD5721, + AD5721R Digital to Analog Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5761. + config AD5764 tristate "Analog Devices AD5764/64R/44/44R DAC driver" depends on SPI_MASTER @@ -176,11 +188,11 @@ config MAX5821 10 bits DAC. config MCP4725 - tristate "MCP4725 DAC driver" + tristate "MCP4725/6 DAC driver" depends on I2C ---help--- Say Y here if you want to build a driver for the Microchip - MCP 4725 12-bit digital-to-analog converter (DAC) with I2C + MCP 4725/6 12-bit digital-to-analog converter (DAC) with I2C interface. To compile this driver as a module, choose M here: the module @@ -196,4 +208,23 @@ config MCP4922 To compile this driver as a module, choose M here: the module will be called mcp4922. +config STX104 + tristate "Apex Embedded Systems STX104 DAC driver" + depends on ISA + help + Say yes here to build support for the 2-channel DAC on the Apex + Embedded Systems STX104 integrated analog PC/104 card. The base port + addresses for the devices may be configured via the "base" module + parameter array. + +config VF610_DAC + tristate "Vybrid vf610 DAC driver" + depends on OF + depends on HAS_IOMEM + help + Say yes here to support Vybrid board digital-to-analog converter. + + This driver can also be built as a module. If so, the module will + be called vf610_dac. + endmenu diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 63ae056..67b4842 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_AD5504) += ad5504.o obj-$(CONFIG_AD5446) += ad5446.o obj-$(CONFIG_AD5449) += ad5449.o obj-$(CONFIG_AD5755) += ad5755.o +obj-$(CONFIG_AD5761) += ad5761.o obj-$(CONFIG_AD5764) += ad5764.o obj-$(CONFIG_AD5791) += ad5791.o obj-$(CONFIG_AD5686) += ad5686.o @@ -21,3 +22,5 @@ obj-$(CONFIG_MAX517) += max517.o obj-$(CONFIG_MAX5821) += max5821.o obj-$(CONFIG_MCP4725) += mcp4725.o obj-$(CONFIG_MCP4922) += mcp4922.o +obj-$(CONFIG_STX104) += stx104.o +obj-$(CONFIG_VF610_DAC) += vf610_dac.o diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c index 81ca008..6803e4a 100644 --- a/drivers/iio/dac/ad5064.c +++ b/drivers/iio/dac/ad5064.c @@ -1,6 +1,9 @@ /* - * AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, - * AD5648, AD5666, AD5668, AD5669R Digital to analog converters driver + * AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, + * AD5627, AD5627R, AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, + * AD5666, AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616, + * LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to analog converters + * driver * * Copyright 2011 Analog Devices Inc. * @@ -39,6 +42,9 @@ #define AD5064_CMD_RESET 0x7 #define AD5064_CMD_CONFIG 0x8 +#define AD5064_CMD_RESET_V2 0x5 +#define AD5064_CMD_CONFIG_V2 0x7 + #define AD5064_CONFIG_DAISY_CHAIN_ENABLE BIT(1) #define AD5064_CONFIG_INT_VREF_ENABLE BIT(0) @@ -48,12 +54,25 @@ #define AD5064_LDAC_PWRDN_3STATE 0x3 /** + * enum ad5064_regmap_type - Register layout variant + * @AD5064_REGMAP_ADI: Old Analog Devices register map layout + * @AD5064_REGMAP_ADI2: New Analog Devices register map layout + * @AD5064_REGMAP_LTC: LTC register map layout + */ +enum ad5064_regmap_type { + AD5064_REGMAP_ADI, + AD5064_REGMAP_ADI2, + AD5064_REGMAP_LTC, +}; + +/** * struct ad5064_chip_info - chip specific information * @shared_vref: whether the vref supply is shared between channels - * @internal_vref: internal reference voltage. 0 if the chip has no internal - * vref. + * @internal_vref: internal reference voltage. 0 if the chip has no + internal vref. * @channel: channel specification * @num_channels: number of channels + * @regmap_type: register map layout variant */ struct ad5064_chip_info { @@ -61,6 +80,7 @@ struct ad5064_chip_info { unsigned long internal_vref; const struct iio_chan_spec *channels; unsigned int num_channels; + enum ad5064_regmap_type regmap_type; }; struct ad5064_state; @@ -111,18 +131,43 @@ enum ad5064_type { ID_AD5064, ID_AD5064_1, ID_AD5065, + ID_AD5625, + ID_AD5625R_1V25, + ID_AD5625R_2V5, + ID_AD5627, + ID_AD5627R_1V25, + ID_AD5627R_2V5, ID_AD5628_1, ID_AD5628_2, ID_AD5629_1, ID_AD5629_2, + ID_AD5645R_1V25, + ID_AD5645R_2V5, + ID_AD5647R_1V25, + ID_AD5647R_2V5, ID_AD5648_1, ID_AD5648_2, + ID_AD5665, + ID_AD5665R_1V25, + ID_AD5665R_2V5, ID_AD5666_1, ID_AD5666_2, + ID_AD5667, + ID_AD5667R_1V25, + ID_AD5667R_2V5, ID_AD5668_1, ID_AD5668_2, ID_AD5669_1, ID_AD5669_2, + ID_LTC2606, + ID_LTC2607, + ID_LTC2609, + ID_LTC2616, + ID_LTC2617, + ID_LTC2619, + ID_LTC2626, + ID_LTC2627, + ID_LTC2629, }; static int ad5064_write(struct ad5064_state *st, unsigned int cmd, @@ -136,15 +181,27 @@ static int ad5064_write(struct ad5064_state *st, unsigned int cmd, static int ad5064_sync_powerdown_mode(struct ad5064_state *st, const struct iio_chan_spec *chan) { - unsigned int val; + unsigned int val, address; + unsigned int shift; int ret; - val = (0x1 << chan->address); + if (st->chip_info->regmap_type == AD5064_REGMAP_LTC) { + val = 0; + address = chan->address; + } else { + if (st->chip_info->regmap_type == AD5064_REGMAP_ADI2) + shift = 4; + else + shift = 8; + + val = (0x1 << chan->address); + address = 0; - if (st->pwr_down[chan->channel]) - val |= st->pwr_down_mode[chan->channel] << 8; + if (st->pwr_down[chan->channel]) + val |= st->pwr_down_mode[chan->channel] << shift; + } - ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, 0, val, 0); + ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, address, val, 0); return ret; } @@ -155,6 +212,10 @@ static const char * const ad5064_powerdown_modes[] = { "three_state", }; +static const char * const ltc2617_powerdown_modes[] = { + "90kohm_to_gnd", +}; + static int ad5064_get_powerdown_mode(struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { @@ -185,6 +246,13 @@ static const struct iio_enum ad5064_powerdown_mode_enum = { .set = ad5064_set_powerdown_mode, }; +static const struct iio_enum ltc2617_powerdown_mode_enum = { + .items = ltc2617_powerdown_modes, + .num_items = ARRAY_SIZE(ltc2617_powerdown_modes), + .get = ad5064_get_powerdown_mode, + .set = ad5064_set_powerdown_mode, +}; + static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev, uintptr_t private, const struct iio_chan_spec *chan, char *buf) { @@ -295,7 +363,19 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = { { }, }; -#define AD5064_CHANNEL(chan, addr, bits, _shift) { \ +static const struct iio_chan_spec_ext_info ltc2617_ext_info[] = { + { + .name = "powerdown", + .read = ad5064_read_dac_powerdown, + .write = ad5064_write_dac_powerdown, + .shared = IIO_SEPARATE, + }, + IIO_ENUM("powerdown_mode", IIO_SEPARATE, <c2617_powerdown_mode_enum), + IIO_ENUM_AVAILABLE("powerdown_mode", <c2617_powerdown_mode_enum), + { }, +}; + +#define AD5064_CHANNEL(chan, addr, bits, _shift, _ext_info) { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .output = 1, \ @@ -309,145 +389,340 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = { .storagebits = 16, \ .shift = (_shift), \ }, \ - .ext_info = ad5064_ext_info, \ + .ext_info = (_ext_info), \ } -#define DECLARE_AD5064_CHANNELS(name, bits, shift) \ +#define DECLARE_AD5064_CHANNELS(name, bits, shift, ext_info) \ const struct iio_chan_spec name[] = { \ - AD5064_CHANNEL(0, 0, bits, shift), \ - AD5064_CHANNEL(1, 1, bits, shift), \ - AD5064_CHANNEL(2, 2, bits, shift), \ - AD5064_CHANNEL(3, 3, bits, shift), \ - AD5064_CHANNEL(4, 4, bits, shift), \ - AD5064_CHANNEL(5, 5, bits, shift), \ - AD5064_CHANNEL(6, 6, bits, shift), \ - AD5064_CHANNEL(7, 7, bits, shift), \ + AD5064_CHANNEL(0, 0, bits, shift, ext_info), \ + AD5064_CHANNEL(1, 1, bits, shift, ext_info), \ + AD5064_CHANNEL(2, 2, bits, shift, ext_info), \ + AD5064_CHANNEL(3, 3, bits, shift, ext_info), \ + AD5064_CHANNEL(4, 4, bits, shift, ext_info), \ + AD5064_CHANNEL(5, 5, bits, shift, ext_info), \ + AD5064_CHANNEL(6, 6, bits, shift, ext_info), \ + AD5064_CHANNEL(7, 7, bits, shift, ext_info), \ } -#define DECLARE_AD5065_CHANNELS(name, bits, shift) \ +#define DECLARE_AD5065_CHANNELS(name, bits, shift, ext_info) \ const struct iio_chan_spec name[] = { \ - AD5064_CHANNEL(0, 0, bits, shift), \ - AD5064_CHANNEL(1, 3, bits, shift), \ + AD5064_CHANNEL(0, 0, bits, shift, ext_info), \ + AD5064_CHANNEL(1, 3, bits, shift, ext_info), \ } -static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8); -static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6); -static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4); +static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4, ad5064_ext_info); + +static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8, ad5064_ext_info); +static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6, ad5064_ext_info); +static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4, ad5064_ext_info); -static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8); -static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6); -static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4); +static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5645_channels, 14, 2, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0, ad5064_ext_info); -static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4); -static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0); +static DECLARE_AD5064_CHANNELS(ltc2607_channels, 16, 0, ltc2617_ext_info); +static DECLARE_AD5064_CHANNELS(ltc2617_channels, 14, 2, ltc2617_ext_info); +static DECLARE_AD5064_CHANNELS(ltc2627_channels, 12, 4, ltc2617_ext_info); static const struct ad5064_chip_info ad5064_chip_info_tbl[] = { [ID_AD5024] = { .shared_vref = false, .channels = ad5024_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5025] = { .shared_vref = false, .channels = ad5025_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5044] = { .shared_vref = false, .channels = ad5044_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5045] = { .shared_vref = false, .channels = ad5045_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5064] = { .shared_vref = false, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5064_1] = { .shared_vref = true, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5065] = { .shared_vref = false, .channels = ad5065_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5625] = { + .shared_vref = true, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5625R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5625R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627] = { + .shared_vref = true, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5628_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5024_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5628_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5024_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5629_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5629_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5629_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5629_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5645R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5645_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5645R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5645_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5647R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5645_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5647R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5645_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5648_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5044_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5648_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5044_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5665] = { + .shared_vref = true, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5665R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5665R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5666_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5666_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5667] = { + .shared_vref = true, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5667R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5667R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5668_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5064_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5668_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5064_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5669_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5669_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5669_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5669_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_LTC2606] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2607] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2609] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2616] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2617] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2619] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2626] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2627] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2629] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, }, }; @@ -469,6 +744,22 @@ static const char * const ad5064_vref_name(struct ad5064_state *st, return st->chip_info->shared_vref ? "vref" : ad5064_vref_names[vref]; } +static int ad5064_set_config(struct ad5064_state *st, unsigned int val) +{ + unsigned int cmd; + + switch (st->chip_info->regmap_type) { + case AD5064_REGMAP_ADI2: + cmd = AD5064_CMD_CONFIG_V2; + break; + default: + cmd = AD5064_CMD_CONFIG; + break; + } + + return ad5064_write(st, cmd, 0, val, 0); +} + static int ad5064_probe(struct device *dev, enum ad5064_type type, const char *name, ad5064_write_func write) { @@ -498,8 +789,7 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type, if (!st->chip_info->internal_vref) return ret; st->use_internal_vref = true; - ret = ad5064_write(st, AD5064_CMD_CONFIG, 0, - AD5064_CONFIG_INT_VREF_ENABLE, 0); + ret = ad5064_set_config(st, AD5064_CONFIG_INT_VREF_ENABLE); if (ret) { dev_err(dev, "Failed to enable internal vref: %d\n", ret); @@ -628,9 +918,19 @@ static int ad5064_i2c_write(struct ad5064_state *st, unsigned int cmd, unsigned int addr, unsigned int val) { struct i2c_client *i2c = to_i2c_client(st->dev); + unsigned int cmd_shift; int ret; - st->data.i2c[0] = (cmd << 4) | addr; + switch (st->chip_info->regmap_type) { + case AD5064_REGMAP_ADI2: + cmd_shift = 3; + break; + default: + cmd_shift = 4; + break; + } + + st->data.i2c[0] = (cmd << cmd_shift) | addr; put_unaligned_be16(val, &st->data.i2c[1]); ret = i2c_master_send(i2c, st->data.i2c, 3); @@ -653,12 +953,35 @@ static int ad5064_i2c_remove(struct i2c_client *i2c) } static const struct i2c_device_id ad5064_i2c_ids[] = { + {"ad5625", ID_AD5625 }, + {"ad5625r-1v25", ID_AD5625R_1V25 }, + {"ad5625r-2v5", ID_AD5625R_2V5 }, + {"ad5627", ID_AD5627 }, + {"ad5627r-1v25", ID_AD5627R_1V25 }, + {"ad5627r-2v5", ID_AD5627R_2V5 }, {"ad5629-1", ID_AD5629_1}, {"ad5629-2", ID_AD5629_2}, {"ad5629-3", ID_AD5629_2}, /* similar enough to ad5629-2 */ + {"ad5645r-1v25", ID_AD5645R_1V25 }, + {"ad5645r-2v5", ID_AD5645R_2V5 }, + {"ad5665", ID_AD5665 }, + {"ad5665r-1v25", ID_AD5665R_1V25 }, + {"ad5665r-2v5", ID_AD5665R_2V5 }, + {"ad5667", ID_AD5667 }, + {"ad5667r-1v25", ID_AD5667R_1V25 }, + {"ad5667r-2v5", ID_AD5667R_2V5 }, {"ad5669-1", ID_AD5669_1}, {"ad5669-2", ID_AD5669_2}, {"ad5669-3", ID_AD5669_2}, /* similar enough to ad5669-2 */ + {"ltc2606", ID_LTC2606}, + {"ltc2607", ID_LTC2607}, + {"ltc2609", ID_LTC2609}, + {"ltc2616", ID_LTC2616}, + {"ltc2617", ID_LTC2617}, + {"ltc2619", ID_LTC2619}, + {"ltc2626", ID_LTC2626}, + {"ltc2627", ID_LTC2627}, + {"ltc2629", ID_LTC2629}, {} }; MODULE_DEVICE_TABLE(i2c, ad5064_i2c_ids); diff --git b/drivers/iio/dac/ad5761.c b/drivers/iio/dac/ad5761.c new file mode 100644 index 0000000..d6510d6 --- /dev/null +++ b/drivers/iio/dac/ad5761.c @@ -0,0 +1,430 @@ +/* + * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter + * + * Copyright 2016 Qtechnology A/S + * 2016 Ricardo Ribalda + * + * Licensed under the GPL-2. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define AD5761_ADDR(addr) ((addr & 0xf) << 16) +#define AD5761_ADDR_NOOP 0x0 +#define AD5761_ADDR_DAC_WRITE 0x3 +#define AD5761_ADDR_CTRL_WRITE_REG 0x4 +#define AD5761_ADDR_SW_DATA_RESET 0x7 +#define AD5761_ADDR_DAC_READ 0xb +#define AD5761_ADDR_CTRL_READ_REG 0xc +#define AD5761_ADDR_SW_FULL_RESET 0xf + +#define AD5761_CTRL_USE_INTVREF BIT(5) +#define AD5761_CTRL_ETS BIT(6) + +/** + * struct ad5761_chip_info - chip specific information + * @int_vref: Value of the internal reference voltage in mV - 0 if external + * reference voltage is used + * @channel: channel specification +*/ + +struct ad5761_chip_info { + unsigned long int_vref; + const struct iio_chan_spec channel; +}; + +struct ad5761_range_params { + int m; + int c; +}; + +enum ad5761_supported_device_ids { + ID_AD5721, + ID_AD5721R, + ID_AD5761, + ID_AD5761R, +}; + +/** + * struct ad5761_state - driver instance specific data + * @spi: spi_device + * @vref_reg: reference voltage regulator + * @use_intref: true when the internal voltage reference is used + * @vref: actual voltage reference in mVolts + * @range: output range mode used + * @data: cache aligned spi buffer + */ +struct ad5761_state { + struct spi_device *spi; + struct regulator *vref_reg; + + bool use_intref; + int vref; + enum ad5761_voltage_range range; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + union { + __be32 d32; + u8 d8[4]; + } data[3] ____cacheline_aligned; +}; + +static const struct ad5761_range_params ad5761_range_params[] = { + [AD5761_VOLTAGE_RANGE_M10V_10V] = { + .m = 80, + .c = 40, + }, + [AD5761_VOLTAGE_RANGE_0V_10V] = { + .m = 40, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_M5V_5V] = { + .m = 40, + .c = 20, + }, + [AD5761_VOLTAGE_RANGE_0V_5V] = { + .m = 20, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_M2V5_7V5] = { + .m = 40, + .c = 10, + }, + [AD5761_VOLTAGE_RANGE_M3V_3V] = { + .m = 24, + .c = 12, + }, + [AD5761_VOLTAGE_RANGE_0V_16V] = { + .m = 64, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_0V_20V] = { + .m = 80, + .c = 0, + }, +}; + +static int _ad5761_spi_write(struct ad5761_state *st, u8 addr, u16 val) +{ + st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr) | val); + + return spi_write(st->spi, &st->data[0].d8[1], 3); +} + +static int ad5761_spi_write(struct iio_dev *indio_dev, u8 addr, u16 val) +{ + struct ad5761_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = _ad5761_spi_write(st, addr, val); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int _ad5761_spi_read(struct ad5761_state *st, u8 addr, u16 *val) +{ + int ret; + struct spi_transfer xfers[] = { + { + .tx_buf = &st->data[0].d8[1], + .bits_per_word = 8, + .len = 3, + .cs_change = true, + }, { + .tx_buf = &st->data[1].d8[1], + .rx_buf = &st->data[2].d8[1], + .bits_per_word = 8, + .len = 3, + }, + }; + + st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr)); + st->data[1].d32 = cpu_to_be32(AD5761_ADDR(AD5761_ADDR_NOOP)); + + ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers)); + + *val = be32_to_cpu(st->data[2].d32); + + return ret; +} + +static int ad5761_spi_read(struct iio_dev *indio_dev, u8 addr, u16 *val) +{ + struct ad5761_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = _ad5761_spi_read(st, addr, val); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int ad5761_spi_set_range(struct ad5761_state *st, + enum ad5761_voltage_range range) +{ + u16 aux; + int ret; + + aux = (range & 0x7) | AD5761_CTRL_ETS; + + if (st->use_intref) + aux |= AD5761_CTRL_USE_INTVREF; + + ret = _ad5761_spi_write(st, AD5761_ADDR_SW_FULL_RESET, 0); + if (ret) + return ret; + + ret = _ad5761_spi_write(st, AD5761_ADDR_CTRL_WRITE_REG, aux); + if (ret) + return ret; + + st->range = range; + + return 0; +} + +static int ad5761_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct ad5761_state *st; + int ret; + u16 aux; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = ad5761_spi_read(indio_dev, AD5761_ADDR_DAC_READ, &aux); + if (ret) + return ret; + *val = aux >> chan->scan_type.shift; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + st = iio_priv(indio_dev); + *val = st->vref * ad5761_range_params[st->range].m; + *val /= 10; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_OFFSET: + st = iio_priv(indio_dev); + *val = -(1 << chan->scan_type.realbits); + *val *= ad5761_range_params[st->range].c; + *val /= ad5761_range_params[st->range].m; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ad5761_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + u16 aux; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if (val2 || (val << chan->scan_type.shift) > 0xffff || val < 0) + return -EINVAL; + + aux = val << chan->scan_type.shift; + + return ad5761_spi_write(indio_dev, AD5761_ADDR_DAC_WRITE, aux); +} + +static const struct iio_info ad5761_info = { + .read_raw = &ad5761_read_raw, + .write_raw = &ad5761_write_raw, + .driver_module = THIS_MODULE, +}; + +#define AD5761_CHAN(_bits) { \ + .type = IIO_VOLTAGE, \ + .output = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (_bits), \ + .storagebits = 16, \ + .shift = 16 - (_bits), \ + }, \ +} + +static const struct ad5761_chip_info ad5761_chip_infos[] = { + [ID_AD5721] = { + .int_vref = 0, + .channel = AD5761_CHAN(12), + }, + [ID_AD5721R] = { + .int_vref = 2500, + .channel = AD5761_CHAN(12), + }, + [ID_AD5761] = { + .int_vref = 0, + .channel = AD5761_CHAN(16), + }, + [ID_AD5761R] = { + .int_vref = 2500, + .channel = AD5761_CHAN(16), + }, +}; + +static int ad5761_get_vref(struct ad5761_state *st, + const struct ad5761_chip_info *chip_info) +{ + int ret; + + st->vref_reg = devm_regulator_get_optional(&st->spi->dev, "vref"); + if (PTR_ERR(st->vref_reg) == -ENODEV) { + /* Use Internal regulator */ + if (!chip_info->int_vref) { + dev_err(&st->spi->dev, + "Voltage reference not found\n"); + return -EIO; + } + + st->use_intref = true; + st->vref = chip_info->int_vref; + return 0; + } + + if (IS_ERR(st->vref_reg)) { + dev_err(&st->spi->dev, + "Error getting voltage reference regulator\n"); + return PTR_ERR(st->vref_reg); + } + + ret = regulator_enable(st->vref_reg); + if (ret) { + dev_err(&st->spi->dev, + "Failed to enable voltage reference\n"); + return ret; + } + + ret = regulator_get_voltage(st->vref_reg); + if (ret < 0) { + dev_err(&st->spi->dev, + "Failed to get voltage reference value\n"); + goto disable_regulator_vref; + } + + if (ret < 2000000 || ret > 3000000) { + dev_warn(&st->spi->dev, + "Invalid external voltage ref. value %d uV\n", ret); + ret = -EIO; + goto disable_regulator_vref; + } + + st->vref = ret / 1000; + st->use_intref = false; + + return 0; + +disable_regulator_vref: + regulator_disable(st->vref_reg); + st->vref_reg = NULL; + return ret; +} + +static int ad5761_probe(struct spi_device *spi) +{ + struct iio_dev *iio_dev; + struct ad5761_state *st; + int ret; + const struct ad5761_chip_info *chip_info = + &ad5761_chip_infos[spi_get_device_id(spi)->driver_data]; + enum ad5761_voltage_range voltage_range = AD5761_VOLTAGE_RANGE_0V_5V; + struct ad5761_platform_data *pdata = dev_get_platdata(&spi->dev); + + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!iio_dev) + return -ENOMEM; + + st = iio_priv(iio_dev); + + st->spi = spi; + spi_set_drvdata(spi, iio_dev); + + ret = ad5761_get_vref(st, chip_info); + if (ret) + return ret; + + if (pdata) + voltage_range = pdata->voltage_range; + + ret = ad5761_spi_set_range(st, voltage_range); + if (ret) + goto disable_regulator_err; + + iio_dev->dev.parent = &spi->dev; + iio_dev->info = &ad5761_info; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = &chip_info->channel; + iio_dev->num_channels = 1; + iio_dev->name = spi_get_device_id(st->spi)->name; + ret = iio_device_register(iio_dev); + if (ret) + goto disable_regulator_err; + + return 0; + +disable_regulator_err: + if (!IS_ERR_OR_NULL(st->vref_reg)) + regulator_disable(st->vref_reg); + + return ret; +} + +static int ad5761_remove(struct spi_device *spi) +{ + struct iio_dev *iio_dev = spi_get_drvdata(spi); + struct ad5761_state *st = iio_priv(iio_dev); + + iio_device_unregister(iio_dev); + + if (!IS_ERR_OR_NULL(st->vref_reg)) + regulator_disable(st->vref_reg); + + return 0; +} + +static const struct spi_device_id ad5761_id[] = { + {"ad5721", ID_AD5721}, + {"ad5721r", ID_AD5721R}, + {"ad5761", ID_AD5761}, + {"ad5761r", ID_AD5761R}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad5761_id); + +static struct spi_driver ad5761_driver = { + .driver = { + .name = "ad5761", + }, + .probe = ad5761_probe, + .remove = ad5761_remove, + .id_table = ad5761_id, +}; +module_spi_driver(ad5761_driver); + +MODULE_AUTHOR("Ricardo Ribalda "); +MODULE_DESCRIPTION("Analog Devices AD5721, AD5721R, AD5761, AD5761R driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c index b4dde83..cca935c 100644 --- a/drivers/iio/dac/mcp4725.c +++ b/drivers/iio/dac/mcp4725.c @@ -1,5 +1,5 @@ /* - * mcp4725.c - Support for Microchip MCP4725 + * mcp4725.c - Support for Microchip MCP4725/6 * * Copyright (C) 2012 Peter Meerwald * @@ -134,6 +134,12 @@ static const char * const mcp4725_powerdown_modes[] = { "500kohm_to_gnd" }; +static const char * const mcp4726_powerdown_modes[] = { + "1kohm_to_gnd", + "125kohm_to_gnd", + "640kohm_to_gnd" +}; + static int mcp4725_get_powerdown_mode(struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { @@ -182,11 +188,24 @@ static ssize_t mcp4725_write_powerdown(struct iio_dev *indio_dev, return len; } -static const struct iio_enum mcp4725_powerdown_mode_enum = { - .items = mcp4725_powerdown_modes, - .num_items = ARRAY_SIZE(mcp4725_powerdown_modes), - .get = mcp4725_get_powerdown_mode, - .set = mcp4725_set_powerdown_mode, +enum { + MCP4725, + MCP4726, +}; + +static const struct iio_enum mcp472x_powerdown_mode_enum[] = { + [MCP4725] = { + .items = mcp4725_powerdown_modes, + .num_items = ARRAY_SIZE(mcp4725_powerdown_modes), + .get = mcp4725_get_powerdown_mode, + .set = mcp4725_set_powerdown_mode, + }, + [MCP4726] = { + .items = mcp4726_powerdown_modes, + .num_items = ARRAY_SIZE(mcp4726_powerdown_modes), + .get = mcp4725_get_powerdown_mode, + .set = mcp4725_set_powerdown_mode, + }, }; static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = { @@ -196,19 +215,46 @@ static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = { .write = mcp4725_write_powerdown, .shared = IIO_SEPARATE, }, - IIO_ENUM("powerdown_mode", IIO_SEPARATE, &mcp4725_powerdown_mode_enum), - IIO_ENUM_AVAILABLE("powerdown_mode", &mcp4725_powerdown_mode_enum), + IIO_ENUM("powerdown_mode", IIO_SEPARATE, + &mcp472x_powerdown_mode_enum[MCP4725]), + IIO_ENUM_AVAILABLE("powerdown_mode", + &mcp472x_powerdown_mode_enum[MCP4725]), + { }, +}; + +static const struct iio_chan_spec_ext_info mcp4726_ext_info[] = { + { + .name = "powerdown", + .read = mcp4725_read_powerdown, + .write = mcp4725_write_powerdown, + .shared = IIO_SEPARATE, + }, + IIO_ENUM("powerdown_mode", IIO_SEPARATE, + &mcp472x_powerdown_mode_enum[MCP4726]), + IIO_ENUM_AVAILABLE("powerdown_mode", + &mcp472x_powerdown_mode_enum[MCP4726]), { }, }; -static const struct iio_chan_spec mcp4725_channel = { - .type = IIO_VOLTAGE, - .indexed = 1, - .output = 1, - .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), - .ext_info = mcp4725_ext_info, +static const struct iio_chan_spec mcp472x_channel[] = { + [MCP4725] = { + .type = IIO_VOLTAGE, + .indexed = 1, + .output = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .ext_info = mcp4725_ext_info, + }, + [MCP4726] = { + .type = IIO_VOLTAGE, + .indexed = 1, + .output = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .ext_info = mcp4726_ext_info, + }, }; static int mcp4725_set_value(struct iio_dev *indio_dev, int val) @@ -302,7 +348,7 @@ static int mcp4725_probe(struct i2c_client *client, indio_dev->dev.parent = &client->dev; indio_dev->name = id->name; indio_dev->info = &mcp4725_info; - indio_dev->channels = &mcp4725_channel; + indio_dev->channels = &mcp472x_channel[id->driver_data]; indio_dev->num_channels = 1; indio_dev->modes = INDIO_DIRECT_MODE; @@ -316,7 +362,7 @@ static int mcp4725_probe(struct i2c_client *client, } pd = (inbuf[0] >> 1) & 0x3; data->powerdown = pd > 0 ? true : false; - data->powerdown_mode = pd ? pd-1 : 2; /* 500kohm_to_gnd */ + data->powerdown_mode = pd ? pd - 1 : 2; /* largest register to gnd */ data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4); return iio_device_register(indio_dev); @@ -329,7 +375,8 @@ static int mcp4725_remove(struct i2c_client *client) } static const struct i2c_device_id mcp4725_id[] = { - { "mcp4725", 0 }, + { "mcp4725", MCP4725 }, + { "mcp4726", MCP4726 }, { } }; MODULE_DEVICE_TABLE(i2c, mcp4725_id); @@ -346,5 +393,5 @@ static struct i2c_driver mcp4725_driver = { module_i2c_driver(mcp4725_driver); MODULE_AUTHOR("Peter Meerwald "); -MODULE_DESCRIPTION("MCP4725 12-bit DAC"); +MODULE_DESCRIPTION("MCP4725/6 12-bit DAC"); MODULE_LICENSE("GPL"); diff --git b/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c new file mode 100644 index 0000000..174f4b7 --- /dev/null +++ b/drivers/iio/dac/stx104.c @@ -0,0 +1,152 @@ +/* + * DAC driver for the Apex Embedded Systems STX104 + * Copyright (C) 2016 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STX104_NUM_CHAN 2 + +#define STX104_CHAN(chan) { \ + .type = IIO_VOLTAGE, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .indexed = 1, \ + .output = 1 \ +} + +#define STX104_EXTENT 16 +/** + * The highest base address possible for an ISA device is 0x3FF; this results in + * 1024 possible base addresses. Dividing the number of possible base addresses + * by the address extent taken by each device results in the maximum number of + * devices on a system. + */ +#define MAX_NUM_STX104 (1024 / STX104_EXTENT) + +static unsigned base[MAX_NUM_STX104]; +static unsigned num_stx104; +module_param_array(base, uint, &num_stx104, 0); +MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); + +/** + * struct stx104_iio - IIO device private data structure + * @chan_out_states: channels' output states + * @base: base port address of the IIO device + */ +struct stx104_iio { + unsigned chan_out_states[STX104_NUM_CHAN]; + unsigned base; +}; + +static int stx104_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + *val = priv->chan_out_states[chan->channel]; + + return IIO_VAL_INT; +} + +static int stx104_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + const unsigned chan_addr_offset = 2 * chan->channel; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + priv->chan_out_states[chan->channel] = val; + outw(val, priv->base + 4 + chan_addr_offset); + + return 0; +} + +static const struct iio_info stx104_info = { + .driver_module = THIS_MODULE, + .read_raw = stx104_read_raw, + .write_raw = stx104_write_raw +}; + +static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = { + STX104_CHAN(0), + STX104_CHAN(1) +}; + +static int stx104_probe(struct device *dev, unsigned int id) +{ + struct iio_dev *indio_dev; + struct stx104_iio *priv; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], STX104_EXTENT, + dev_name(dev))) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + STX104_EXTENT); + return -EBUSY; + } + + indio_dev->info = &stx104_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = stx104_channels; + indio_dev->num_channels = STX104_NUM_CHAN; + indio_dev->name = dev_name(dev); + + priv = iio_priv(indio_dev); + priv->base = base[id]; + + /* initialize DAC output to 0V */ + outw(0, base[id] + 4); + outw(0, base[id] + 6); + + return devm_iio_device_register(dev, indio_dev); +} + +static struct isa_driver stx104_driver = { + .probe = stx104_probe, + .driver = { + .name = "stx104" + } +}; + +static void __exit stx104_exit(void) +{ + isa_unregister_driver(&stx104_driver); +} + +static int __init stx104_init(void) +{ + return isa_register_driver(&stx104_driver, num_stx104); +} + +module_init(stx104_init); +module_exit(stx104_exit); + +MODULE_AUTHOR("William Breathitt Gray "); +MODULE_DESCRIPTION("Apex Embedded Systems STX104 DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/dac/vf610_dac.c b/drivers/iio/dac/vf610_dac.c new file mode 100644 index 0000000..c4ec777 --- /dev/null +++ b/drivers/iio/dac/vf610_dac.c @@ -0,0 +1,298 @@ +/* + * Freescale Vybrid vf610 DAC driver + * + * Copyright 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define VF610_DACx_STATCTRL 0x20 + +#define VF610_DAC_DACEN BIT(15) +#define VF610_DAC_DACRFS BIT(14) +#define VF610_DAC_LPEN BIT(11) + +#define VF610_DAC_DAT0(x) ((x) & 0xFFF) + +enum vf610_conversion_mode_sel { + VF610_DAC_CONV_HIGH_POWER, + VF610_DAC_CONV_LOW_POWER, +}; + +struct vf610_dac { + struct clk *clk; + struct device *dev; + enum vf610_conversion_mode_sel conv_mode; + void __iomem *regs; +}; + +static void vf610_dac_init(struct vf610_dac *info) +{ + int val; + + info->conv_mode = VF610_DAC_CONV_LOW_POWER; + val = VF610_DAC_DACEN | VF610_DAC_DACRFS | + VF610_DAC_LPEN; + writel(val, info->regs + VF610_DACx_STATCTRL); +} + +static void vf610_dac_exit(struct vf610_dac *info) +{ + int val; + + val = readl(info->regs + VF610_DACx_STATCTRL); + val &= ~VF610_DAC_DACEN; + writel(val, info->regs + VF610_DACx_STATCTRL); +} + +static int vf610_set_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct vf610_dac *info = iio_priv(indio_dev); + int val; + + mutex_lock(&indio_dev->mlock); + info->conv_mode = mode; + val = readl(info->regs + VF610_DACx_STATCTRL); + if (mode) + val |= VF610_DAC_LPEN; + else + val &= ~VF610_DAC_LPEN; + writel(val, info->regs + VF610_DACx_STATCTRL); + mutex_unlock(&indio_dev->mlock); + + return 0; +} + +static int vf610_get_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + return info->conv_mode; +} + +static const char * const vf610_conv_modes[] = { "high-power", "low-power" }; + +static const struct iio_enum vf610_conversion_mode = { + .items = vf610_conv_modes, + .num_items = ARRAY_SIZE(vf610_conv_modes), + .get = vf610_get_conversion_mode, + .set = vf610_set_conversion_mode, +}; + +static const struct iio_chan_spec_ext_info vf610_ext_info[] = { + IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, + &vf610_conversion_mode), + {}, +}; + +#define VF610_DAC_CHAN(_chan_type) { \ + .type = (_chan_type), \ + .output = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = vf610_ext_info, \ +} + +static const struct iio_chan_spec vf610_dac_iio_channels[] = { + VF610_DAC_CHAN(IIO_VOLTAGE), +}; + +static int vf610_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + *val = VF610_DAC_DAT0(readl(info->regs)); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* + * DACRFS is always 1 for valid reference and typical + * reference voltage as per Vybrid datasheet is 3.3V + * from section 9.1.2.1 of Vybrid datasheet + */ + *val = 3300 /* mV */; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +static int vf610_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, + long mask) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + writel(VF610_DAC_DAT0(val), info->regs); + mutex_unlock(&indio_dev->mlock); + return 0; + + default: + return -EINVAL; + } +} + +static const struct iio_info vf610_dac_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = &vf610_read_raw, + .write_raw = &vf610_write_raw, +}; + +static const struct of_device_id vf610_dac_match[] = { + { .compatible = "fsl,vf610-dac", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, vf610_dac_match); + +static int vf610_dac_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct vf610_dac *info; + struct resource *mem; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct vf610_dac)); + if (!indio_dev) { + dev_err(&pdev->dev, "Failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + info->dev = &pdev->dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + info->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + info->clk = devm_clk_get(&pdev->dev, "dac"); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "Failed getting clock, err = %ld\n", + PTR_ERR(info->clk)); + return PTR_ERR(info->clk); + } + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->dev.of_node = pdev->dev.of_node; + indio_dev->info = &vf610_dac_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = vf610_dac_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(vf610_dac_iio_channels); + + ret = clk_prepare_enable(info->clk); + if (ret) { + dev_err(&pdev->dev, + "Could not prepare or enable the clock\n"); + return ret; + } + + vf610_dac_init(info); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "Couldn't register the device\n"); + goto error_iio_device_register; + } + + return 0; + +error_iio_device_register: + clk_disable_unprepare(info->clk); + + return ret; +} + +static int vf610_dac_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct vf610_dac *info = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + vf610_dac_exit(info); + clk_disable_unprepare(info->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int vf610_dac_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct vf610_dac *info = iio_priv(indio_dev); + + vf610_dac_exit(info); + clk_disable_unprepare(info->clk); + + return 0; +} + +static int vf610_dac_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct vf610_dac *info = iio_priv(indio_dev); + int ret; + + ret = clk_prepare_enable(info->clk); + if (ret) + return ret; + + vf610_dac_init(info); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(vf610_dac_pm_ops, vf610_dac_suspend, vf610_dac_resume); + +static struct platform_driver vf610_dac_driver = { + .probe = vf610_dac_probe, + .remove = vf610_dac_remove, + .driver = { + .name = "vf610-dac", + .of_match_table = vf610_dac_match, + .pm = &vf610_dac_pm_ops, + }, +}; +module_platform_driver(vf610_dac_driver); + +MODULE_AUTHOR("Sanchayan Maity "); +MODULE_DESCRIPTION("Freescale VF610 DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 02eddce..110f95b 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -185,6 +185,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_1_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT, .bootime = 2, @@ -248,6 +253,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_2_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT, .bootime = 2, @@ -307,6 +317,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_3_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/health/Kconfig b/drivers/iio/health/Kconfig index a647679..c5f004a 100644 --- a/drivers/iio/health/Kconfig +++ b/drivers/iio/health/Kconfig @@ -3,7 +3,35 @@ # # When adding new entries keep the list in alphabetical order -menu "Health sensors" +menu "Health Sensors" + +menu "Heart Rate Monitors" + +config AFE4403 + tristate "TI AFE4403 Heart Rate Monitor" + depends on SPI_MASTER + select REGMAP_SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes to choose the Texas Instruments AFE4403 + heart rate monitor and low-cost pulse oximeter. + + To compile this driver as a module, choose M here: the + module will be called afe4403. + +config AFE4404 + tristate "TI AFE4404 heart rate and pulse oximeter sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes to choose the Texas Instruments AFE4404 + heart rate monitor and low-cost pulse oximeter. + + To compile this driver as a module, choose M here: the + module will be called afe4404. config MAX30100 tristate "MAX30100 heart rate and pulse oximeter sensor" @@ -19,3 +47,5 @@ config MAX30100 module will be called max30100. endmenu + +endmenu diff --git a/drivers/iio/health/Makefile b/drivers/iio/health/Makefile index 7c475d7..9955a2a 100644 --- a/drivers/iio/health/Makefile +++ b/drivers/iio/health/Makefile @@ -4,4 +4,6 @@ # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_AFE4403) += afe4403.o +obj-$(CONFIG_AFE4404) += afe4404.o obj-$(CONFIG_MAX30100) += max30100.o diff --git b/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c new file mode 100644 index 0000000..88e43f8 --- /dev/null +++ b/drivers/iio/health/afe4403.c @@ -0,0 +1,708 @@ +/* + * AFE4403 Heart Rate Monitors and Low-Cost Pulse Oximeters + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "afe440x.h" + +#define AFE4403_DRIVER_NAME "afe4403" + +/* AFE4403 Registers */ +#define AFE4403_TIAGAIN 0x20 +#define AFE4403_TIA_AMB_GAIN 0x21 + +/* AFE4403 GAIN register fields */ +#define AFE4403_TIAGAIN_RES_MASK GENMASK(2, 0) +#define AFE4403_TIAGAIN_RES_SHIFT 0 +#define AFE4403_TIAGAIN_CAP_MASK GENMASK(7, 3) +#define AFE4403_TIAGAIN_CAP_SHIFT 3 + +/* AFE4403 LEDCNTRL register fields */ +#define AFE440X_LEDCNTRL_LED1_MASK GENMASK(15, 8) +#define AFE440X_LEDCNTRL_LED1_SHIFT 8 +#define AFE440X_LEDCNTRL_LED2_MASK GENMASK(7, 0) +#define AFE440X_LEDCNTRL_LED2_SHIFT 0 +#define AFE440X_LEDCNTRL_LED_RANGE_MASK GENMASK(17, 16) +#define AFE440X_LEDCNTRL_LED_RANGE_SHIFT 16 + +/* AFE4403 CONTROL2 register fields */ +#define AFE440X_CONTROL2_PWR_DWN_TX BIT(2) +#define AFE440X_CONTROL2_EN_SLOW_DIAG BIT(8) +#define AFE440X_CONTROL2_DIAG_OUT_TRI BIT(10) +#define AFE440X_CONTROL2_TX_BRDG_MOD BIT(11) +#define AFE440X_CONTROL2_TX_REF_MASK GENMASK(18, 17) +#define AFE440X_CONTROL2_TX_REF_SHIFT 17 + +/* AFE4404 NULL fields */ +#define NULL_MASK 0 +#define NULL_SHIFT 0 + +/* AFE4403 LEDCNTRL values */ +#define AFE440X_LEDCNTRL_RANGE_TX_HALF 0x1 +#define AFE440X_LEDCNTRL_RANGE_TX_FULL 0x2 +#define AFE440X_LEDCNTRL_RANGE_TX_OFF 0x3 + +/* AFE4403 CONTROL2 values */ +#define AFE440X_CONTROL2_TX_REF_025 0x0 +#define AFE440X_CONTROL2_TX_REF_050 0x1 +#define AFE440X_CONTROL2_TX_REF_100 0x2 +#define AFE440X_CONTROL2_TX_REF_075 0x3 + +/* AFE4403 CONTROL3 values */ +#define AFE440X_CONTROL3_CLK_DIV_2 0x0 +#define AFE440X_CONTROL3_CLK_DIV_4 0x2 +#define AFE440X_CONTROL3_CLK_DIV_6 0x3 +#define AFE440X_CONTROL3_CLK_DIV_8 0x4 +#define AFE440X_CONTROL3_CLK_DIV_12 0x5 +#define AFE440X_CONTROL3_CLK_DIV_1 0x7 + +/* AFE4403 TIAGAIN_CAP values */ +#define AFE4403_TIAGAIN_CAP_5_P 0x0 +#define AFE4403_TIAGAIN_CAP_10_P 0x1 +#define AFE4403_TIAGAIN_CAP_20_P 0x2 +#define AFE4403_TIAGAIN_CAP_30_P 0x3 +#define AFE4403_TIAGAIN_CAP_55_P 0x8 +#define AFE4403_TIAGAIN_CAP_155_P 0x10 + +/* AFE4403 TIAGAIN_RES values */ +#define AFE4403_TIAGAIN_RES_500_K 0x0 +#define AFE4403_TIAGAIN_RES_250_K 0x1 +#define AFE4403_TIAGAIN_RES_100_K 0x2 +#define AFE4403_TIAGAIN_RES_50_K 0x3 +#define AFE4403_TIAGAIN_RES_25_K 0x4 +#define AFE4403_TIAGAIN_RES_10_K 0x5 +#define AFE4403_TIAGAIN_RES_1_M 0x6 +#define AFE4403_TIAGAIN_RES_NONE 0x7 + +/** + * struct afe4403_data + * @dev - Device structure + * @spi - SPI device handle + * @regmap - Register map of the device + * @regulator - Pointer to the regulator for the IC + * @trig - IIO trigger for this device + * @irq - ADC_RDY line interrupt number + */ +struct afe4403_data { + struct device *dev; + struct spi_device *spi; + struct regmap *regmap; + struct regulator *regulator; + struct iio_trigger *trig; + int irq; +}; + +enum afe4403_chan_id { + LED1, + ALED1, + LED2, + ALED2, + LED1_ALED1, + LED2_ALED2, + ILED1, + ILED2, +}; + +static const struct afe440x_reg_info afe4403_reg_info[] = { + [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, 0, NULL), + [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, 0, NULL), + [LED2] = AFE440X_REG_INFO(AFE440X_LED2VAL, 0, NULL), + [ALED2] = AFE440X_REG_INFO(AFE440X_ALED2VAL, 0, NULL), + [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL), + [LED2_ALED2] = AFE440X_REG_INFO(AFE440X_LED2_ALED2VAL, 0, NULL), + [ILED1] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE440X_LEDCNTRL_LED1), + [ILED2] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE440X_LEDCNTRL_LED2), +}; + +static const struct iio_chan_spec afe4403_channels[] = { + /* ADC values */ + AFE440X_INTENSITY_CHAN(LED1, "led1", 0), + AFE440X_INTENSITY_CHAN(ALED1, "led1_ambient", 0), + AFE440X_INTENSITY_CHAN(LED2, "led2", 0), + AFE440X_INTENSITY_CHAN(ALED2, "led2_ambient", 0), + AFE440X_INTENSITY_CHAN(LED1_ALED1, "led1-led1_ambient", 0), + AFE440X_INTENSITY_CHAN(LED2_ALED2, "led2-led2_ambient", 0), + /* LED current */ + AFE440X_CURRENT_CHAN(ILED1, "led1"), + AFE440X_CURRENT_CHAN(ILED2, "led2"), +}; + +static const struct afe440x_val_table afe4403_res_table[] = { + { 500000 }, { 250000 }, { 100000 }, { 50000 }, + { 25000 }, { 10000 }, { 1000000 }, { 0 }, +}; +AFE440X_TABLE_ATTR(tia_resistance_available, afe4403_res_table); + +static const struct afe440x_val_table afe4403_cap_table[] = { + { 0, 5000 }, { 0, 10000 }, { 0, 20000 }, { 0, 25000 }, + { 0, 30000 }, { 0, 35000 }, { 0, 45000 }, { 0, 50000 }, + { 0, 55000 }, { 0, 60000 }, { 0, 70000 }, { 0, 75000 }, + { 0, 80000 }, { 0, 85000 }, { 0, 95000 }, { 0, 100000 }, + { 0, 155000 }, { 0, 160000 }, { 0, 170000 }, { 0, 175000 }, + { 0, 180000 }, { 0, 185000 }, { 0, 195000 }, { 0, 200000 }, + { 0, 205000 }, { 0, 210000 }, { 0, 220000 }, { 0, 225000 }, + { 0, 230000 }, { 0, 235000 }, { 0, 245000 }, { 0, 250000 }, +}; +AFE440X_TABLE_ATTR(tia_capacitance_available, afe4403_cap_table); + +static ssize_t afe440x_show_register(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe = iio_priv(indio_dev); + struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); + unsigned int reg_val, type; + int vals[2]; + int ret, val_len; + + ret = regmap_read(afe->regmap, afe440x_attr->reg, ®_val); + if (ret) + return ret; + + reg_val &= afe440x_attr->mask; + reg_val >>= afe440x_attr->shift; + + switch (afe440x_attr->type) { + case SIMPLE: + type = IIO_VAL_INT; + val_len = 1; + vals[0] = reg_val; + break; + case RESISTANCE: + case CAPACITANCE: + type = IIO_VAL_INT_PLUS_MICRO; + val_len = 2; + if (reg_val < afe440x_attr->table_size) { + vals[0] = afe440x_attr->val_table[reg_val].integer; + vals[1] = afe440x_attr->val_table[reg_val].fract; + break; + } + return -EINVAL; + default: + return -EINVAL; + } + + return iio_format_value(buf, type, val_len, vals); +} + +static ssize_t afe440x_store_register(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe = iio_priv(indio_dev); + struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); + int val, integer, fract, ret; + + ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract); + if (ret) + return ret; + + switch (afe440x_attr->type) { + case SIMPLE: + val = integer; + break; + case RESISTANCE: + case CAPACITANCE: + for (val = 0; val < afe440x_attr->table_size; val++) + if (afe440x_attr->val_table[val].integer == integer && + afe440x_attr->val_table[val].fract == fract) + break; + if (val == afe440x_attr->table_size) + return -EINVAL; + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(afe->regmap, afe440x_attr->reg, + afe440x_attr->mask, + (val << afe440x_attr->shift)); + if (ret) + return ret; + + return count; +} + +static AFE440X_ATTR(tia_separate_en, AFE4403_TIAGAIN, AFE440X_TIAGAIN_ENSEPGAIN, SIMPLE, NULL, 0); + +static AFE440X_ATTR(tia_resistance1, AFE4403_TIAGAIN, AFE4403_TIAGAIN_RES, RESISTANCE, afe4403_res_table, ARRAY_SIZE(afe4403_res_table)); +static AFE440X_ATTR(tia_capacitance1, AFE4403_TIAGAIN, AFE4403_TIAGAIN_CAP, CAPACITANCE, afe4403_cap_table, ARRAY_SIZE(afe4403_cap_table)); + +static AFE440X_ATTR(tia_resistance2, AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES, RESISTANCE, afe4403_res_table, ARRAY_SIZE(afe4403_res_table)); +static AFE440X_ATTR(tia_capacitance2, AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES, CAPACITANCE, afe4403_cap_table, ARRAY_SIZE(afe4403_cap_table)); + +static struct attribute *afe440x_attributes[] = { + &afe440x_attr_tia_separate_en.dev_attr.attr, + &afe440x_attr_tia_resistance1.dev_attr.attr, + &afe440x_attr_tia_capacitance1.dev_attr.attr, + &afe440x_attr_tia_resistance2.dev_attr.attr, + &afe440x_attr_tia_capacitance2.dev_attr.attr, + &dev_attr_tia_resistance_available.attr, + &dev_attr_tia_capacitance_available.attr, + NULL +}; + +static const struct attribute_group afe440x_attribute_group = { + .attrs = afe440x_attributes +}; + +static int afe4403_read(struct afe4403_data *afe, unsigned int reg, u32 *val) +{ + u8 tx[4] = {AFE440X_CONTROL0, 0x0, 0x0, AFE440X_CONTROL0_READ}; + u8 rx[3]; + int ret; + + /* Enable reading from the device */ + ret = spi_write_then_read(afe->spi, tx, 4, NULL, 0); + if (ret) + return ret; + + ret = spi_write_then_read(afe->spi, ®, 1, rx, 3); + if (ret) + return ret; + + *val = (rx[0] << 16) | + (rx[1] << 8) | + (rx[2]); + + /* Disable reading from the device */ + tx[3] = AFE440X_CONTROL0_WRITE; + ret = spi_write_then_read(afe->spi, tx, 4, NULL, 0); + if (ret) + return ret; + + return 0; +} + +static int afe4403_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct afe4403_data *afe = iio_priv(indio_dev); + const struct afe440x_reg_info reg_info = afe4403_reg_info[chan->address]; + int ret; + + switch (chan->type) { + case IIO_INTENSITY: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = afe4403_read(afe, reg_info.reg, val); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + ret = regmap_read(afe->regmap, reg_info.offreg, + val); + if (ret) + return ret; + *val &= reg_info.mask; + *val >>= reg_info.shift; + return IIO_VAL_INT; + } + break; + case IIO_CURRENT: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_read(afe->regmap, reg_info.reg, val); + if (ret) + return ret; + *val &= reg_info.mask; + *val >>= reg_info.shift; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 800000; + return IIO_VAL_INT_PLUS_MICRO; + } + break; + default: + break; + } + + return -EINVAL; +} + +static int afe4403_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct afe4403_data *afe = iio_priv(indio_dev); + const struct afe440x_reg_info reg_info = afe4403_reg_info[chan->address]; + + switch (chan->type) { + case IIO_INTENSITY: + switch (mask) { + case IIO_CHAN_INFO_OFFSET: + return regmap_update_bits(afe->regmap, + reg_info.offreg, + reg_info.mask, + (val << reg_info.shift)); + } + break; + case IIO_CURRENT: + switch (mask) { + case IIO_CHAN_INFO_RAW: + return regmap_update_bits(afe->regmap, + reg_info.reg, + reg_info.mask, + (val << reg_info.shift)); + } + break; + default: + break; + } + + return -EINVAL; +} + +static const struct iio_info afe4403_iio_info = { + .attrs = &afe440x_attribute_group, + .read_raw = afe4403_read_raw, + .write_raw = afe4403_write_raw, + .driver_module = THIS_MODULE, +}; + +static irqreturn_t afe4403_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct afe4403_data *afe = iio_priv(indio_dev); + int ret, bit, i = 0; + s32 buffer[8]; + u8 tx[4] = {AFE440X_CONTROL0, 0x0, 0x0, AFE440X_CONTROL0_READ}; + u8 rx[3]; + + /* Enable reading from the device */ + ret = spi_write_then_read(afe->spi, tx, 4, NULL, 0); + if (ret) + goto err; + + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = spi_write_then_read(afe->spi, + &afe4403_reg_info[bit].reg, 1, + rx, 3); + if (ret) + goto err; + + buffer[i++] = (rx[0] << 16) | + (rx[1] << 8) | + (rx[2]); + } + + /* Disable reading from the device */ + tx[3] = AFE440X_CONTROL0_WRITE; + ret = spi_write_then_read(afe->spi, tx, 4, NULL, 0); + if (ret) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_trigger_ops afe4403_trigger_ops = { + .owner = THIS_MODULE, +}; + +#define AFE4403_TIMING_PAIRS \ + { AFE440X_LED2STC, 0x000050 }, \ + { AFE440X_LED2ENDC, 0x0003e7 }, \ + { AFE440X_LED1LEDSTC, 0x0007d0 }, \ + { AFE440X_LED1LEDENDC, 0x000bb7 }, \ + { AFE440X_ALED2STC, 0x000438 }, \ + { AFE440X_ALED2ENDC, 0x0007cf }, \ + { AFE440X_LED1STC, 0x000820 }, \ + { AFE440X_LED1ENDC, 0x000bb7 }, \ + { AFE440X_LED2LEDSTC, 0x000000 }, \ + { AFE440X_LED2LEDENDC, 0x0003e7 }, \ + { AFE440X_ALED1STC, 0x000c08 }, \ + { AFE440X_ALED1ENDC, 0x000f9f }, \ + { AFE440X_LED2CONVST, 0x0003ef }, \ + { AFE440X_LED2CONVEND, 0x0007cf }, \ + { AFE440X_ALED2CONVST, 0x0007d7 }, \ + { AFE440X_ALED2CONVEND, 0x000bb7 }, \ + { AFE440X_LED1CONVST, 0x000bbf }, \ + { AFE440X_LED1CONVEND, 0x009c3f }, \ + { AFE440X_ALED1CONVST, 0x000fa7 }, \ + { AFE440X_ALED1CONVEND, 0x001387 }, \ + { AFE440X_ADCRSTSTCT0, 0x0003e8 }, \ + { AFE440X_ADCRSTENDCT0, 0x0003eb }, \ + { AFE440X_ADCRSTSTCT1, 0x0007d0 }, \ + { AFE440X_ADCRSTENDCT1, 0x0007d3 }, \ + { AFE440X_ADCRSTSTCT2, 0x000bb8 }, \ + { AFE440X_ADCRSTENDCT2, 0x000bbb }, \ + { AFE440X_ADCRSTSTCT3, 0x000fa0 }, \ + { AFE440X_ADCRSTENDCT3, 0x000fa3 }, \ + { AFE440X_PRPCOUNT, 0x009c3f }, \ + { AFE440X_PDNCYCLESTC, 0x001518 }, \ + { AFE440X_PDNCYCLEENDC, 0x00991f } + +static const struct reg_sequence afe4403_reg_sequences[] = { + AFE4403_TIMING_PAIRS, + { AFE440X_CONTROL1, AFE440X_CONTROL1_TIMEREN | 0x000007}, + { AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES_1_M }, + { AFE440X_LEDCNTRL, (0x14 << AFE440X_LEDCNTRL_LED1_SHIFT) | + (0x14 << AFE440X_LEDCNTRL_LED2_SHIFT) }, + { AFE440X_CONTROL2, AFE440X_CONTROL2_TX_REF_050 << + AFE440X_CONTROL2_TX_REF_SHIFT }, +}; + +static const struct regmap_range afe4403_yes_ranges[] = { + regmap_reg_range(AFE440X_LED2VAL, AFE440X_LED1_ALED1VAL), +}; + +static const struct regmap_access_table afe4403_volatile_table = { + .yes_ranges = afe4403_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(afe4403_yes_ranges), +}; + +static const struct regmap_config afe4403_regmap_config = { + .reg_bits = 8, + .val_bits = 24, + + .max_register = AFE440X_PDNCYCLEENDC, + .cache_type = REGCACHE_RBTREE, + .volatile_table = &afe4403_volatile_table, +}; + +#ifdef CONFIG_OF +static const struct of_device_id afe4403_of_match[] = { + { .compatible = "ti,afe4403", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, afe4403_of_match); +#endif + +static int __maybe_unused afe4403_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe = iio_priv(indio_dev); + int ret; + + ret = regmap_update_bits(afe->regmap, AFE440X_CONTROL2, + AFE440X_CONTROL2_PDN_AFE, + AFE440X_CONTROL2_PDN_AFE); + if (ret) + return ret; + + ret = regulator_disable(afe->regulator); + if (ret) { + dev_err(dev, "Unable to disable regulator\n"); + return ret; + } + + return 0; +} + +static int __maybe_unused afe4403_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(afe->regulator); + if (ret) { + dev_err(dev, "Unable to enable regulator\n"); + return ret; + } + + ret = regmap_update_bits(afe->regmap, AFE440X_CONTROL2, + AFE440X_CONTROL2_PDN_AFE, 0); + if (ret) + return ret; + + return 0; +} + +static SIMPLE_DEV_PM_OPS(afe4403_pm_ops, afe4403_suspend, afe4403_resume); + +static int afe4403_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct afe4403_data *afe; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*afe)); + if (!indio_dev) + return -ENOMEM; + + afe = iio_priv(indio_dev); + spi_set_drvdata(spi, indio_dev); + + afe->dev = &spi->dev; + afe->spi = spi; + afe->irq = spi->irq; + + afe->regmap = devm_regmap_init_spi(spi, &afe4403_regmap_config); + if (IS_ERR(afe->regmap)) { + dev_err(afe->dev, "Unable to allocate register map\n"); + return PTR_ERR(afe->regmap); + } + + afe->regulator = devm_regulator_get(afe->dev, "tx_sup"); + if (IS_ERR(afe->regulator)) { + dev_err(afe->dev, "Unable to get regulator\n"); + return PTR_ERR(afe->regulator); + } + ret = regulator_enable(afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to enable regulator\n"); + return ret; + } + + ret = regmap_write(afe->regmap, AFE440X_CONTROL0, + AFE440X_CONTROL0_SW_RESET); + if (ret) { + dev_err(afe->dev, "Unable to reset device\n"); + goto err_disable_reg; + } + + ret = regmap_multi_reg_write(afe->regmap, afe4403_reg_sequences, + ARRAY_SIZE(afe4403_reg_sequences)); + if (ret) { + dev_err(afe->dev, "Unable to set register defaults\n"); + goto err_disable_reg; + } + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->dev.parent = afe->dev; + indio_dev->channels = afe4403_channels; + indio_dev->num_channels = ARRAY_SIZE(afe4403_channels); + indio_dev->name = AFE4403_DRIVER_NAME; + indio_dev->info = &afe4403_iio_info; + + if (afe->irq > 0) { + afe->trig = devm_iio_trigger_alloc(afe->dev, + "%s-dev%d", + indio_dev->name, + indio_dev->id); + if (!afe->trig) { + dev_err(afe->dev, "Unable to allocate IIO trigger\n"); + ret = -ENOMEM; + goto err_disable_reg; + } + + iio_trigger_set_drvdata(afe->trig, indio_dev); + + afe->trig->ops = &afe4403_trigger_ops; + afe->trig->dev.parent = afe->dev; + + ret = iio_trigger_register(afe->trig); + if (ret) { + dev_err(afe->dev, "Unable to register IIO trigger\n"); + goto err_disable_reg; + } + + ret = devm_request_threaded_irq(afe->dev, afe->irq, + iio_trigger_generic_data_rdy_poll, + NULL, IRQF_ONESHOT, + AFE4403_DRIVER_NAME, + afe->trig); + if (ret) { + dev_err(afe->dev, "Unable to request IRQ\n"); + goto err_trig; + } + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + afe4403_trigger_handler, NULL); + if (ret) { + dev_err(afe->dev, "Unable to setup buffer\n"); + goto err_trig; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(afe->dev, "Unable to register IIO device\n"); + goto err_buff; + } + + return 0; + +err_buff: + iio_triggered_buffer_cleanup(indio_dev); +err_trig: + if (afe->irq > 0) + iio_trigger_unregister(afe->trig); +err_disable_reg: + regulator_disable(afe->regulator); + + return ret; +} + +static int afe4403_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct afe4403_data *afe = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + + iio_triggered_buffer_cleanup(indio_dev); + + if (afe->irq > 0) + iio_trigger_unregister(afe->trig); + + ret = regulator_disable(afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to disable regulator\n"); + return ret; + } + + return 0; +} + +static const struct spi_device_id afe4403_ids[] = { + { "afe4403", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(spi, afe4403_ids); + +static struct spi_driver afe4403_spi_driver = { + .driver = { + .name = AFE4403_DRIVER_NAME, + .of_match_table = of_match_ptr(afe4403_of_match), + .pm = &afe4403_pm_ops, + }, + .probe = afe4403_probe, + .remove = afe4403_remove, + .id_table = afe4403_ids, +}; +module_spi_driver(afe4403_spi_driver); + +MODULE_AUTHOR("Andrew F. Davis "); +MODULE_DESCRIPTION("TI AFE4403 Heart Rate and Pulse Oximeter"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c new file mode 100644 index 0000000..5096a46 --- /dev/null +++ b/drivers/iio/health/afe4404.c @@ -0,0 +1,679 @@ +/* + * AFE4404 Heart Rate Monitors and Low-Cost Pulse Oximeters + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "afe440x.h" + +#define AFE4404_DRIVER_NAME "afe4404" + +/* AFE4404 registers */ +#define AFE4404_TIA_GAIN_SEP 0x20 +#define AFE4404_TIA_GAIN 0x21 +#define AFE4404_PROG_TG_STC 0x34 +#define AFE4404_PROG_TG_ENDC 0x35 +#define AFE4404_LED3LEDSTC 0x36 +#define AFE4404_LED3LEDENDC 0x37 +#define AFE4404_CLKDIV_PRF 0x39 +#define AFE4404_OFFDAC 0x3a +#define AFE4404_DEC 0x3d +#define AFE4404_AVG_LED2_ALED2VAL 0x3f +#define AFE4404_AVG_LED1_ALED1VAL 0x40 + +/* AFE4404 GAIN register fields */ +#define AFE4404_TIA_GAIN_RES_MASK GENMASK(2, 0) +#define AFE4404_TIA_GAIN_RES_SHIFT 0 +#define AFE4404_TIA_GAIN_CAP_MASK GENMASK(5, 3) +#define AFE4404_TIA_GAIN_CAP_SHIFT 3 + +/* AFE4404 LEDCNTRL register fields */ +#define AFE4404_LEDCNTRL_ILED1_MASK GENMASK(5, 0) +#define AFE4404_LEDCNTRL_ILED1_SHIFT 0 +#define AFE4404_LEDCNTRL_ILED2_MASK GENMASK(11, 6) +#define AFE4404_LEDCNTRL_ILED2_SHIFT 6 +#define AFE4404_LEDCNTRL_ILED3_MASK GENMASK(17, 12) +#define AFE4404_LEDCNTRL_ILED3_SHIFT 12 + +/* AFE4404 CONTROL2 register fields */ +#define AFE440X_CONTROL2_ILED_2X_MASK BIT(17) +#define AFE440X_CONTROL2_ILED_2X_SHIFT 17 + +/* AFE4404 CONTROL3 register fields */ +#define AFE440X_CONTROL3_OSC_ENABLE BIT(9) + +/* AFE4404 OFFDAC register current fields */ +#define AFE4404_OFFDAC_CURR_LED1_MASK GENMASK(9, 5) +#define AFE4404_OFFDAC_CURR_LED1_SHIFT 5 +#define AFE4404_OFFDAC_CURR_LED2_MASK GENMASK(19, 15) +#define AFE4404_OFFDAC_CURR_LED2_SHIFT 15 +#define AFE4404_OFFDAC_CURR_LED3_MASK GENMASK(4, 0) +#define AFE4404_OFFDAC_CURR_LED3_SHIFT 0 +#define AFE4404_OFFDAC_CURR_ALED1_MASK GENMASK(14, 10) +#define AFE4404_OFFDAC_CURR_ALED1_SHIFT 10 +#define AFE4404_OFFDAC_CURR_ALED2_MASK GENMASK(4, 0) +#define AFE4404_OFFDAC_CURR_ALED2_SHIFT 0 + +/* AFE4404 NULL fields */ +#define NULL_MASK 0 +#define NULL_SHIFT 0 + +/* AFE4404 TIA_GAIN_CAP values */ +#define AFE4404_TIA_GAIN_CAP_5_P 0x0 +#define AFE4404_TIA_GAIN_CAP_2_5_P 0x1 +#define AFE4404_TIA_GAIN_CAP_10_P 0x2 +#define AFE4404_TIA_GAIN_CAP_7_5_P 0x3 +#define AFE4404_TIA_GAIN_CAP_20_P 0x4 +#define AFE4404_TIA_GAIN_CAP_17_5_P 0x5 +#define AFE4404_TIA_GAIN_CAP_25_P 0x6 +#define AFE4404_TIA_GAIN_CAP_22_5_P 0x7 + +/* AFE4404 TIA_GAIN_RES values */ +#define AFE4404_TIA_GAIN_RES_500_K 0x0 +#define AFE4404_TIA_GAIN_RES_250_K 0x1 +#define AFE4404_TIA_GAIN_RES_100_K 0x2 +#define AFE4404_TIA_GAIN_RES_50_K 0x3 +#define AFE4404_TIA_GAIN_RES_25_K 0x4 +#define AFE4404_TIA_GAIN_RES_10_K 0x5 +#define AFE4404_TIA_GAIN_RES_1_M 0x6 +#define AFE4404_TIA_GAIN_RES_2_M 0x7 + +/** + * struct afe4404_data + * @dev - Device structure + * @regmap - Register map of the device + * @regulator - Pointer to the regulator for the IC + * @trig - IIO trigger for this device + * @irq - ADC_RDY line interrupt number + */ +struct afe4404_data { + struct device *dev; + struct regmap *regmap; + struct regulator *regulator; + struct iio_trigger *trig; + int irq; +}; + +enum afe4404_chan_id { + LED1, + ALED1, + LED2, + ALED2, + LED3, + LED1_ALED1, + LED2_ALED2, + ILED1, + ILED2, + ILED3, +}; + +static const struct afe440x_reg_info afe4404_reg_info[] = { + [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED1), + [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED1), + [LED2] = AFE440X_REG_INFO(AFE440X_LED2VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED2), + [ALED2] = AFE440X_REG_INFO(AFE440X_ALED2VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED2), + [LED3] = AFE440X_REG_INFO(AFE440X_ALED2VAL, 0, NULL), + [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL), + [LED2_ALED2] = AFE440X_REG_INFO(AFE440X_LED2_ALED2VAL, 0, NULL), + [ILED1] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED1), + [ILED2] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED2), + [ILED3] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED3), +}; + +static const struct iio_chan_spec afe4404_channels[] = { + /* ADC values */ + AFE440X_INTENSITY_CHAN(LED1, "led1", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(ALED1, "led1_ambient", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(LED2, "led2", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(ALED2, "led2_ambient", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(LED3, "led3", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(LED1_ALED1, "led1-led1_ambient", 0), + AFE440X_INTENSITY_CHAN(LED2_ALED2, "led2-led2_ambient", 0), + /* LED current */ + AFE440X_CURRENT_CHAN(ILED1, "led1"), + AFE440X_CURRENT_CHAN(ILED2, "led2"), + AFE440X_CURRENT_CHAN(ILED3, "led3"), +}; + +static const struct afe440x_val_table afe4404_res_table[] = { + { .integer = 500000, .fract = 0 }, + { .integer = 250000, .fract = 0 }, + { .integer = 100000, .fract = 0 }, + { .integer = 50000, .fract = 0 }, + { .integer = 25000, .fract = 0 }, + { .integer = 10000, .fract = 0 }, + { .integer = 1000000, .fract = 0 }, + { .integer = 2000000, .fract = 0 }, +}; +AFE440X_TABLE_ATTR(tia_resistance_available, afe4404_res_table); + +static const struct afe440x_val_table afe4404_cap_table[] = { + { .integer = 0, .fract = 5000 }, + { .integer = 0, .fract = 2500 }, + { .integer = 0, .fract = 10000 }, + { .integer = 0, .fract = 7500 }, + { .integer = 0, .fract = 20000 }, + { .integer = 0, .fract = 17500 }, + { .integer = 0, .fract = 25000 }, + { .integer = 0, .fract = 22500 }, +}; +AFE440X_TABLE_ATTR(tia_capacitance_available, afe4404_cap_table); + +static ssize_t afe440x_show_register(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4404_data *afe = iio_priv(indio_dev); + struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); + unsigned int reg_val, type; + int vals[2]; + int ret, val_len; + + ret = regmap_read(afe->regmap, afe440x_attr->reg, ®_val); + if (ret) + return ret; + + reg_val &= afe440x_attr->mask; + reg_val >>= afe440x_attr->shift; + + switch (afe440x_attr->type) { + case SIMPLE: + type = IIO_VAL_INT; + val_len = 1; + vals[0] = reg_val; + break; + case RESISTANCE: + case CAPACITANCE: + type = IIO_VAL_INT_PLUS_MICRO; + val_len = 2; + if (reg_val < afe440x_attr->table_size) { + vals[0] = afe440x_attr->val_table[reg_val].integer; + vals[1] = afe440x_attr->val_table[reg_val].fract; + break; + } + return -EINVAL; + default: + return -EINVAL; + } + + return iio_format_value(buf, type, val_len, vals); +} + +static ssize_t afe440x_store_register(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4404_data *afe = iio_priv(indio_dev); + struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); + int val, integer, fract, ret; + + ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract); + if (ret) + return ret; + + switch (afe440x_attr->type) { + case SIMPLE: + val = integer; + break; + case RESISTANCE: + case CAPACITANCE: + for (val = 0; val < afe440x_attr->table_size; val++) + if (afe440x_attr->val_table[val].integer == integer && + afe440x_attr->val_table[val].fract == fract) + break; + if (val == afe440x_attr->table_size) + return -EINVAL; + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(afe->regmap, afe440x_attr->reg, + afe440x_attr->mask, + (val << afe440x_attr->shift)); + if (ret) + return ret; + + return count; +} + +static AFE440X_ATTR(tia_separate_en, AFE4404_TIA_GAIN_SEP, AFE440X_TIAGAIN_ENSEPGAIN, SIMPLE, NULL, 0); + +static AFE440X_ATTR(tia_resistance1, AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_RES, RESISTANCE, afe4404_res_table, ARRAY_SIZE(afe4404_res_table)); +static AFE440X_ATTR(tia_capacitance1, AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_CAP, CAPACITANCE, afe4404_cap_table, ARRAY_SIZE(afe4404_cap_table)); + +static AFE440X_ATTR(tia_resistance2, AFE4404_TIA_GAIN_SEP, AFE4404_TIA_GAIN_RES, RESISTANCE, afe4404_res_table, ARRAY_SIZE(afe4404_res_table)); +static AFE440X_ATTR(tia_capacitance2, AFE4404_TIA_GAIN_SEP, AFE4404_TIA_GAIN_CAP, CAPACITANCE, afe4404_cap_table, ARRAY_SIZE(afe4404_cap_table)); + +static struct attribute *afe440x_attributes[] = { + &afe440x_attr_tia_separate_en.dev_attr.attr, + &afe440x_attr_tia_resistance1.dev_attr.attr, + &afe440x_attr_tia_capacitance1.dev_attr.attr, + &afe440x_attr_tia_resistance2.dev_attr.attr, + &afe440x_attr_tia_capacitance2.dev_attr.attr, + &dev_attr_tia_resistance_available.attr, + &dev_attr_tia_capacitance_available.attr, + NULL +}; + +static const struct attribute_group afe440x_attribute_group = { + .attrs = afe440x_attributes +}; + +static int afe4404_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct afe4404_data *afe = iio_priv(indio_dev); + const struct afe440x_reg_info reg_info = afe4404_reg_info[chan->address]; + int ret; + + switch (chan->type) { + case IIO_INTENSITY: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_read(afe->regmap, reg_info.reg, val); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + ret = regmap_read(afe->regmap, reg_info.offreg, + val); + if (ret) + return ret; + *val &= reg_info.mask; + *val >>= reg_info.shift; + return IIO_VAL_INT; + } + break; + case IIO_CURRENT: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_read(afe->regmap, reg_info.reg, val); + if (ret) + return ret; + *val &= reg_info.mask; + *val >>= reg_info.shift; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 800000; + return IIO_VAL_INT_PLUS_MICRO; + } + break; + default: + break; + } + + return -EINVAL; +} + +static int afe4404_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct afe4404_data *afe = iio_priv(indio_dev); + const struct afe440x_reg_info reg_info = afe4404_reg_info[chan->address]; + + switch (chan->type) { + case IIO_INTENSITY: + switch (mask) { + case IIO_CHAN_INFO_OFFSET: + return regmap_update_bits(afe->regmap, + reg_info.offreg, + reg_info.mask, + (val << reg_info.shift)); + } + break; + case IIO_CURRENT: + switch (mask) { + case IIO_CHAN_INFO_RAW: + return regmap_update_bits(afe->regmap, + reg_info.reg, + reg_info.mask, + (val << reg_info.shift)); + } + break; + default: + break; + } + + return -EINVAL; +} + +static const struct iio_info afe4404_iio_info = { + .attrs = &afe440x_attribute_group, + .read_raw = afe4404_read_raw, + .write_raw = afe4404_write_raw, + .driver_module = THIS_MODULE, +}; + +static irqreturn_t afe4404_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct afe4404_data *afe = iio_priv(indio_dev); + int ret, bit, i = 0; + s32 buffer[10]; + + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = regmap_read(afe->regmap, afe4404_reg_info[bit].reg, + &buffer[i++]); + if (ret) + goto err; + } + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_trigger_ops afe4404_trigger_ops = { + .owner = THIS_MODULE, +}; + +/* Default timings from data-sheet */ +#define AFE4404_TIMING_PAIRS \ + { AFE440X_PRPCOUNT, 39999 }, \ + { AFE440X_LED2LEDSTC, 0 }, \ + { AFE440X_LED2LEDENDC, 398 }, \ + { AFE440X_LED2STC, 80 }, \ + { AFE440X_LED2ENDC, 398 }, \ + { AFE440X_ADCRSTSTCT0, 5600 }, \ + { AFE440X_ADCRSTENDCT0, 5606 }, \ + { AFE440X_LED2CONVST, 5607 }, \ + { AFE440X_LED2CONVEND, 6066 }, \ + { AFE4404_LED3LEDSTC, 400 }, \ + { AFE4404_LED3LEDENDC, 798 }, \ + { AFE440X_ALED2STC, 480 }, \ + { AFE440X_ALED2ENDC, 798 }, \ + { AFE440X_ADCRSTSTCT1, 6068 }, \ + { AFE440X_ADCRSTENDCT1, 6074 }, \ + { AFE440X_ALED2CONVST, 6075 }, \ + { AFE440X_ALED2CONVEND, 6534 }, \ + { AFE440X_LED1LEDSTC, 800 }, \ + { AFE440X_LED1LEDENDC, 1198 }, \ + { AFE440X_LED1STC, 880 }, \ + { AFE440X_LED1ENDC, 1198 }, \ + { AFE440X_ADCRSTSTCT2, 6536 }, \ + { AFE440X_ADCRSTENDCT2, 6542 }, \ + { AFE440X_LED1CONVST, 6543 }, \ + { AFE440X_LED1CONVEND, 7003 }, \ + { AFE440X_ALED1STC, 1280 }, \ + { AFE440X_ALED1ENDC, 1598 }, \ + { AFE440X_ADCRSTSTCT3, 7005 }, \ + { AFE440X_ADCRSTENDCT3, 7011 }, \ + { AFE440X_ALED1CONVST, 7012 }, \ + { AFE440X_ALED1CONVEND, 7471 }, \ + { AFE440X_PDNCYCLESTC, 7671 }, \ + { AFE440X_PDNCYCLEENDC, 39199 } + +static const struct reg_sequence afe4404_reg_sequences[] = { + AFE4404_TIMING_PAIRS, + { AFE440X_CONTROL1, AFE440X_CONTROL1_TIMEREN }, + { AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_RES_50_K }, + { AFE440X_LEDCNTRL, (0xf << AFE4404_LEDCNTRL_ILED1_SHIFT) | + (0x3 << AFE4404_LEDCNTRL_ILED2_SHIFT) | + (0x3 << AFE4404_LEDCNTRL_ILED3_SHIFT) }, + { AFE440X_CONTROL2, AFE440X_CONTROL3_OSC_ENABLE }, +}; + +static const struct regmap_range afe4404_yes_ranges[] = { + regmap_reg_range(AFE440X_LED2VAL, AFE440X_LED1_ALED1VAL), + regmap_reg_range(AFE4404_AVG_LED2_ALED2VAL, AFE4404_AVG_LED1_ALED1VAL), +}; + +static const struct regmap_access_table afe4404_volatile_table = { + .yes_ranges = afe4404_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(afe4404_yes_ranges), +}; + +static const struct regmap_config afe4404_regmap_config = { + .reg_bits = 8, + .val_bits = 24, + + .max_register = AFE4404_AVG_LED1_ALED1VAL, + .cache_type = REGCACHE_RBTREE, + .volatile_table = &afe4404_volatile_table, +}; + +#ifdef CONFIG_OF +static const struct of_device_id afe4404_of_match[] = { + { .compatible = "ti,afe4404", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, afe4404_of_match); +#endif + +static int __maybe_unused afe4404_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4404_data *afe = iio_priv(indio_dev); + int ret; + + ret = regmap_update_bits(afe->regmap, AFE440X_CONTROL2, + AFE440X_CONTROL2_PDN_AFE, + AFE440X_CONTROL2_PDN_AFE); + if (ret) + return ret; + + ret = regulator_disable(afe->regulator); + if (ret) { + dev_err(dev, "Unable to disable regulator\n"); + return ret; + } + + return 0; +} + +static int __maybe_unused afe4404_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4404_data *afe = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(afe->regulator); + if (ret) { + dev_err(dev, "Unable to enable regulator\n"); + return ret; + } + + ret = regmap_update_bits(afe->regmap, AFE440X_CONTROL2, + AFE440X_CONTROL2_PDN_AFE, 0); + if (ret) + return ret; + + return 0; +} + +static SIMPLE_DEV_PM_OPS(afe4404_pm_ops, afe4404_suspend, afe4404_resume); + +static int afe4404_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct afe4404_data *afe; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*afe)); + if (!indio_dev) + return -ENOMEM; + + afe = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + + afe->dev = &client->dev; + afe->irq = client->irq; + + afe->regmap = devm_regmap_init_i2c(client, &afe4404_regmap_config); + if (IS_ERR(afe->regmap)) { + dev_err(afe->dev, "Unable to allocate register map\n"); + return PTR_ERR(afe->regmap); + } + + afe->regulator = devm_regulator_get(afe->dev, "tx_sup"); + if (IS_ERR(afe->regulator)) { + dev_err(afe->dev, "Unable to get regulator\n"); + return PTR_ERR(afe->regulator); + } + ret = regulator_enable(afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to enable regulator\n"); + return ret; + } + + ret = regmap_write(afe->regmap, AFE440X_CONTROL0, + AFE440X_CONTROL0_SW_RESET); + if (ret) { + dev_err(afe->dev, "Unable to reset device\n"); + goto disable_reg; + } + + ret = regmap_multi_reg_write(afe->regmap, afe4404_reg_sequences, + ARRAY_SIZE(afe4404_reg_sequences)); + if (ret) { + dev_err(afe->dev, "Unable to set register defaults\n"); + goto disable_reg; + } + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->dev.parent = afe->dev; + indio_dev->channels = afe4404_channels; + indio_dev->num_channels = ARRAY_SIZE(afe4404_channels); + indio_dev->name = AFE4404_DRIVER_NAME; + indio_dev->info = &afe4404_iio_info; + + if (afe->irq > 0) { + afe->trig = devm_iio_trigger_alloc(afe->dev, + "%s-dev%d", + indio_dev->name, + indio_dev->id); + if (!afe->trig) { + dev_err(afe->dev, "Unable to allocate IIO trigger\n"); + ret = -ENOMEM; + goto disable_reg; + } + + iio_trigger_set_drvdata(afe->trig, indio_dev); + + afe->trig->ops = &afe4404_trigger_ops; + afe->trig->dev.parent = afe->dev; + + ret = iio_trigger_register(afe->trig); + if (ret) { + dev_err(afe->dev, "Unable to register IIO trigger\n"); + goto disable_reg; + } + + ret = devm_request_threaded_irq(afe->dev, afe->irq, + iio_trigger_generic_data_rdy_poll, + NULL, IRQF_ONESHOT, + AFE4404_DRIVER_NAME, + afe->trig); + if (ret) { + dev_err(afe->dev, "Unable to request IRQ\n"); + goto disable_reg; + } + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + afe4404_trigger_handler, NULL); + if (ret) { + dev_err(afe->dev, "Unable to setup buffer\n"); + goto unregister_trigger; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(afe->dev, "Unable to register IIO device\n"); + goto unregister_triggered_buffer; + } + + return 0; + +unregister_triggered_buffer: + iio_triggered_buffer_cleanup(indio_dev); +unregister_trigger: + if (afe->irq > 0) + iio_trigger_unregister(afe->trig); +disable_reg: + regulator_disable(afe->regulator); + + return ret; +} + +static int afe4404_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct afe4404_data *afe = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + + iio_triggered_buffer_cleanup(indio_dev); + + if (afe->irq > 0) + iio_trigger_unregister(afe->trig); + + ret = regulator_disable(afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to disable regulator\n"); + return ret; + } + + return 0; +} + +static const struct i2c_device_id afe4404_ids[] = { + { "afe4404", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, afe4404_ids); + +static struct i2c_driver afe4404_i2c_driver = { + .driver = { + .name = AFE4404_DRIVER_NAME, + .of_match_table = of_match_ptr(afe4404_of_match), + .pm = &afe4404_pm_ops, + }, + .probe = afe4404_probe, + .remove = afe4404_remove, + .id_table = afe4404_ids, +}; +module_i2c_driver(afe4404_i2c_driver); + +MODULE_AUTHOR("Andrew F. Davis "); +MODULE_DESCRIPTION("TI AFE4404 Heart Rate and Pulse Oximeter"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/health/afe440x.h b/drivers/iio/health/afe440x.h new file mode 100644 index 0000000..c671ab7 --- /dev/null +++ b/drivers/iio/health/afe440x.h @@ -0,0 +1,191 @@ +/* + * AFE440X Heart Rate Monitors and Low-Cost Pulse Oximeters + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _AFE440X_H +#define _AFE440X_H + +/* AFE440X registers */ +#define AFE440X_CONTROL0 0x00 +#define AFE440X_LED2STC 0x01 +#define AFE440X_LED2ENDC 0x02 +#define AFE440X_LED1LEDSTC 0x03 +#define AFE440X_LED1LEDENDC 0x04 +#define AFE440X_ALED2STC 0x05 +#define AFE440X_ALED2ENDC 0x06 +#define AFE440X_LED1STC 0x07 +#define AFE440X_LED1ENDC 0x08 +#define AFE440X_LED2LEDSTC 0x09 +#define AFE440X_LED2LEDENDC 0x0a +#define AFE440X_ALED1STC 0x0b +#define AFE440X_ALED1ENDC 0x0c +#define AFE440X_LED2CONVST 0x0d +#define AFE440X_LED2CONVEND 0x0e +#define AFE440X_ALED2CONVST 0x0f +#define AFE440X_ALED2CONVEND 0x10 +#define AFE440X_LED1CONVST 0x11 +#define AFE440X_LED1CONVEND 0x12 +#define AFE440X_ALED1CONVST 0x13 +#define AFE440X_ALED1CONVEND 0x14 +#define AFE440X_ADCRSTSTCT0 0x15 +#define AFE440X_ADCRSTENDCT0 0x16 +#define AFE440X_ADCRSTSTCT1 0x17 +#define AFE440X_ADCRSTENDCT1 0x18 +#define AFE440X_ADCRSTSTCT2 0x19 +#define AFE440X_ADCRSTENDCT2 0x1a +#define AFE440X_ADCRSTSTCT3 0x1b +#define AFE440X_ADCRSTENDCT3 0x1c +#define AFE440X_PRPCOUNT 0x1d +#define AFE440X_CONTROL1 0x1e +#define AFE440X_LEDCNTRL 0x22 +#define AFE440X_CONTROL2 0x23 +#define AFE440X_ALARM 0x29 +#define AFE440X_LED2VAL 0x2a +#define AFE440X_ALED2VAL 0x2b +#define AFE440X_LED1VAL 0x2c +#define AFE440X_ALED1VAL 0x2d +#define AFE440X_LED2_ALED2VAL 0x2e +#define AFE440X_LED1_ALED1VAL 0x2f +#define AFE440X_CONTROL3 0x31 +#define AFE440X_PDNCYCLESTC 0x32 +#define AFE440X_PDNCYCLEENDC 0x33 + +/* CONTROL0 register fields */ +#define AFE440X_CONTROL0_REG_READ BIT(0) +#define AFE440X_CONTROL0_TM_COUNT_RST BIT(1) +#define AFE440X_CONTROL0_SW_RESET BIT(3) + +/* CONTROL1 register fields */ +#define AFE440X_CONTROL1_TIMEREN BIT(8) + +/* TIAGAIN register fields */ +#define AFE440X_TIAGAIN_ENSEPGAIN_MASK BIT(15) +#define AFE440X_TIAGAIN_ENSEPGAIN_SHIFT 15 + +/* CONTROL2 register fields */ +#define AFE440X_CONTROL2_PDN_AFE BIT(0) +#define AFE440X_CONTROL2_PDN_RX BIT(1) +#define AFE440X_CONTROL2_DYNAMIC4 BIT(3) +#define AFE440X_CONTROL2_DYNAMIC3 BIT(4) +#define AFE440X_CONTROL2_DYNAMIC2 BIT(14) +#define AFE440X_CONTROL2_DYNAMIC1 BIT(20) + +/* CONTROL3 register fields */ +#define AFE440X_CONTROL3_CLKDIV GENMASK(2, 0) + +/* CONTROL0 values */ +#define AFE440X_CONTROL0_WRITE 0x0 +#define AFE440X_CONTROL0_READ 0x1 + +struct afe440x_reg_info { + unsigned int reg; + unsigned int offreg; + unsigned int shift; + unsigned int mask; +}; + +#define AFE440X_REG_INFO(_reg, _offreg, _sm) \ + { \ + .reg = _reg, \ + .offreg = _offreg, \ + .shift = _sm ## _SHIFT, \ + .mask = _sm ## _MASK, \ + } + +#define AFE440X_INTENSITY_CHAN(_index, _name, _mask) \ + { \ + .type = IIO_INTENSITY, \ + .channel = _index, \ + .address = _index, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 24, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ + .extend_name = _name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + _mask, \ + } + +#define AFE440X_CURRENT_CHAN(_index, _name) \ + { \ + .type = IIO_CURRENT, \ + .channel = _index, \ + .address = _index, \ + .scan_index = _index, \ + .extend_name = _name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .output = true, \ + } + +enum afe440x_reg_type { + SIMPLE, + RESISTANCE, + CAPACITANCE, +}; + +struct afe440x_val_table { + int integer; + int fract; +}; + +#define AFE440X_TABLE_ATTR(_name, _table) \ +static ssize_t _name ## _show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(_table); i++) \ + len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ", \ + _table[i].integer, \ + _table[i].fract); \ + \ + buf[len - 1] = '\n'; \ + \ + return len; \ +} \ +static DEVICE_ATTR_RO(_name) + +struct afe440x_attr { + struct device_attribute dev_attr; + unsigned int reg; + unsigned int shift; + unsigned int mask; + enum afe440x_reg_type type; + const struct afe440x_val_table *val_table; + unsigned int table_size; +}; + +#define to_afe440x_attr(_dev_attr) \ + container_of(_dev_attr, struct afe440x_attr, dev_attr) + +#define AFE440X_ATTR(_name, _reg, _field, _type, _table, _size) \ + struct afe440x_attr afe440x_attr_##_name = { \ + .dev_attr = __ATTR(_name, (S_IRUGO | S_IWUSR), \ + afe440x_show_register, \ + afe440x_store_register), \ + .reg = _reg, \ + .shift = _field ## _SHIFT, \ + .mask = _field ## _MASK, \ + .type = _type, \ + .val_table = _table, \ + .table_size = _size, \ + } + +#endif /* _AFE440X_H */ diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c index 9d1c81f..90ab8a2 100644 --- a/drivers/iio/health/max30100.c +++ b/drivers/iio/health/max30100.c @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * TODO: allow LED current and pulse length controls via device tree properties + * TODO: enable pulse length controls via device tree properties */ #include @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -65,6 +66,7 @@ #define MAX30100_REG_SPO2_CONFIG_1600US 0x3 #define MAX30100_REG_LED_CONFIG 0x09 +#define MAX30100_REG_LED_CONFIG_LED_MASK 0x0f #define MAX30100_REG_LED_CONFIG_RED_LED_SHIFT 4 #define MAX30100_REG_LED_CONFIG_24MA 0x07 @@ -111,6 +113,12 @@ static const struct regmap_config max30100_regmap_config = { .volatile_reg = max30100_is_volatile_reg, }; +static const unsigned int max30100_led_current_mapping[] = { + 4400, 7600, 11000, 14200, 17400, + 20800, 24000, 27100, 30600, 33800, + 37000, 40200, 43600, 46800, 50000 +}; + static const unsigned long max30100_scan_masks[] = {0x3, 0}; static const struct iio_chan_spec max30100_channels[] = { @@ -230,12 +238,13 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private) mutex_lock(&data->lock); - while (cnt-- || (cnt = max30100_fifo_count(data) > 0)) { + while (cnt || (cnt = max30100_fifo_count(data) > 0)) { ret = max30100_read_measurement(data); if (ret) break; iio_push_to_buffers(data->indio_dev, data->buffer); + cnt--; } mutex_unlock(&data->lock); @@ -243,15 +252,76 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private) return IRQ_HANDLED; } +static int max30100_get_current_idx(unsigned int val, int *reg) +{ + int idx; + + /* LED turned off */ + if (val == 0) { + *reg = 0; + return 0; + } + + for (idx = 0; idx < ARRAY_SIZE(max30100_led_current_mapping); idx++) { + if (max30100_led_current_mapping[idx] == val) { + *reg = idx + 1; + return 0; + } + } + + return -EINVAL; +} + +static int max30100_led_init(struct max30100_data *data) +{ + struct device *dev = &data->client->dev; + struct device_node *np = dev->of_node; + unsigned int val[2]; + int reg, ret; + + ret = of_property_read_u32_array(np, "maxim,led-current-microamp", + (unsigned int *) &val, 2); + if (ret) { + /* Default to 24 mA RED LED, 50 mA IR LED */ + reg = (MAX30100_REG_LED_CONFIG_24MA << + MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) | + MAX30100_REG_LED_CONFIG_50MA; + dev_warn(dev, "no led-current-microamp set"); + + return regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, reg); + } + + /* RED LED current */ + ret = max30100_get_current_idx(val[0], ®); + if (ret) { + dev_err(dev, "invalid RED current setting %d", val[0]); + return ret; + } + + ret = regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG, + MAX30100_REG_LED_CONFIG_LED_MASK << + MAX30100_REG_LED_CONFIG_RED_LED_SHIFT, + reg << MAX30100_REG_LED_CONFIG_RED_LED_SHIFT); + if (ret) + return ret; + + /* IR LED current */ + ret = max30100_get_current_idx(val[1], ®); + if (ret) { + dev_err(dev, "invalid IR current setting %d", val[1]); + return ret; + } + + return regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG, + MAX30100_REG_LED_CONFIG_LED_MASK, reg); +} + static int max30100_chip_init(struct max30100_data *data) { int ret; - /* RED IR LED = 24mA, IR LED = 50mA */ - ret = regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, - (MAX30100_REG_LED_CONFIG_24MA << - MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) | - MAX30100_REG_LED_CONFIG_50MA); + /* setup LED current settings */ + ret = max30100_led_init(data); if (ret) return ret; diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 6a23698..866dda1 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -43,14 +43,16 @@ config SI7005 humidity and temperature sensor. To compile this driver as a module, choose M here: the module - will be called si7005. + will be called si7005. This driver also + supports Hoperf TH02 Humidity and Temperature Sensor. config SI7020 tristate "Si7013/20/21 Relative Humidity and Temperature Sensors" depends on I2C help Say yes here to build support for the Silicon Labs Si7013/20/21 - Relative Humidity and Temperature Sensors. + Relative Humidity and Temperature Sensors. This driver also + supports Hoperf TH06 Humidity and Temperature Sensor. To compile this driver as a module, choose M here: the module will be called si7020. diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index cfc5a05..20b500d 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -50,12 +50,32 @@ #define DHT11_EDGES_PER_READ (2 * DHT11_BITS_PER_READ + \ DHT11_EDGES_PREAMBLE + 1) -/* Data transmission timing (nano seconds) */ +/* + * Data transmission timing: + * Data bits are encoded as pulse length (high time) on the data line. + * 0-bit: 22-30uS -- typically 26uS (AM2302) + * 1-bit: 68-75uS -- typically 70uS (AM2302) + * The acutal timings also depend on the properties of the cable, with + * longer cables typically making pulses shorter. + * + * Our decoding depends on the time resolution of the system: + * timeres > 34uS ... don't know what a 1-tick pulse is + * 34uS > timeres > 30uS ... no problem (30kHz and 32kHz clocks) + * 30uS > timeres > 23uS ... don't know what a 2-tick pulse is + * timeres < 23uS ... no problem + * + * Luckily clocks in the 33-44kHz range are quite uncommon, so we can + * support most systems if the threshold for decoding a pulse as 1-bit + * is chosen carefully. If somebody really wants to support clocks around + * 40kHz, where this driver is most unreliable, there are two options. + * a) select an implementation using busy loop polling on those systems + * b) use the checksum to do some probabilistic decoding + */ #define DHT11_START_TRANSMISSION 18 /* ms */ -#define DHT11_SENSOR_RESPONSE 80000 -#define DHT11_START_BIT 50000 -#define DHT11_DATA_BIT_LOW 27000 -#define DHT11_DATA_BIT_HIGH 70000 +#define DHT11_MIN_TIMERES 34000 /* ns */ +#define DHT11_THRESHOLD 49000 /* ns */ +#define DHT11_AMBIG_LOW 23000 /* ns */ +#define DHT11_AMBIG_HIGH 30000 /* ns */ struct dht11 { struct device *dev; @@ -76,43 +96,39 @@ struct dht11 { struct {s64 ts; int value; } edges[DHT11_EDGES_PER_READ]; }; -static unsigned char dht11_decode_byte(int *timing, int threshold) +static unsigned char dht11_decode_byte(char *bits) { unsigned char ret = 0; int i; for (i = 0; i < 8; ++i) { ret <<= 1; - if (timing[i] >= threshold) + if (bits[i]) ++ret; } return ret; } -static int dht11_decode(struct dht11 *dht11, int offset, int timeres) +static int dht11_decode(struct dht11 *dht11, int offset) { - int i, t, timing[DHT11_BITS_PER_READ], threshold; + int i, t; + char bits[DHT11_BITS_PER_READ]; unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum; - threshold = DHT11_DATA_BIT_HIGH / timeres; - if (DHT11_DATA_BIT_LOW / timeres + 1 >= threshold) - pr_err("dht11: WARNING: decoding ambiguous\n"); - - /* scale down with timeres and check validity */ for (i = 0; i < DHT11_BITS_PER_READ; ++i) { t = dht11->edges[offset + 2 * i + 2].ts - dht11->edges[offset + 2 * i + 1].ts; if (!dht11->edges[offset + 2 * i + 1].value) return -EIO; /* lost synchronisation */ - timing[i] = t / timeres; + bits[i] = t > DHT11_THRESHOLD; } - hum_int = dht11_decode_byte(timing, threshold); - hum_dec = dht11_decode_byte(&timing[8], threshold); - temp_int = dht11_decode_byte(&timing[16], threshold); - temp_dec = dht11_decode_byte(&timing[24], threshold); - checksum = dht11_decode_byte(&timing[32], threshold); + hum_int = dht11_decode_byte(bits); + hum_dec = dht11_decode_byte(&bits[8]); + temp_int = dht11_decode_byte(&bits[16]); + temp_dec = dht11_decode_byte(&bits[24]); + checksum = dht11_decode_byte(&bits[32]); if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum) return -EIO; @@ -161,12 +177,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev, int *val, int *val2, long m) { struct dht11 *dht11 = iio_priv(iio_dev); - int ret, timeres; + int ret, timeres, offset; mutex_lock(&dht11->lock); if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_boot_ns()) { timeres = ktime_get_resolution_ns(); - if (DHT11_DATA_BIT_HIGH < 2 * timeres) { + if (timeres > DHT11_MIN_TIMERES) { dev_err(dht11->dev, "timeresolution %dns too low\n", timeres); /* In theory a better clock could become available @@ -176,6 +192,10 @@ static int dht11_read_raw(struct iio_dev *iio_dev, ret = -EAGAIN; goto err; } + if (timeres > DHT11_AMBIG_LOW && timeres < DHT11_AMBIG_HIGH) + dev_warn(dht11->dev, + "timeresolution: %dns - decoding ambiguous\n", + timeres); reinit_completion(&dht11->completion); @@ -208,11 +228,14 @@ static int dht11_read_raw(struct iio_dev *iio_dev, if (ret < 0) goto err; - ret = dht11_decode(dht11, - dht11->num_edges == DHT11_EDGES_PER_READ ? - DHT11_EDGES_PREAMBLE : - DHT11_EDGES_PREAMBLE - 2, - timeres); + offset = DHT11_EDGES_PREAMBLE + + dht11->num_edges - DHT11_EDGES_PER_READ; + for (; offset >= 0; --offset) { + ret = dht11_decode(dht11, offset); + if (!ret) + break; + } + if (ret) goto err; } diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index a7f61e8..fa47676 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -274,7 +274,7 @@ static int hdc100x_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) diff --git a/drivers/iio/humidity/htu21.c b/drivers/iio/humidity/htu21.c index d1636a7..11cbc38 100644 --- a/drivers/iio/humidity/htu21.c +++ b/drivers/iio/humidity/htu21.c @@ -192,7 +192,7 @@ static int htu21_probe(struct i2c_client *client, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { dev_err(&client->dev, "Adapter does not support some i2c transaction\n"); - return -ENODEV; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c index 91972cc..6297766 100644 --- a/drivers/iio/humidity/si7005.c +++ b/drivers/iio/humidity/si7005.c @@ -135,7 +135,7 @@ static int si7005_probe(struct i2c_client *client, int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) @@ -170,6 +170,7 @@ static int si7005_probe(struct i2c_client *client, static const struct i2c_device_id si7005_id[] = { { "si7005", 0 }, + { "th02", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, si7005_id); diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c index 71991b5..ffc2ccf 100644 --- a/drivers/iio/humidity/si7020.c +++ b/drivers/iio/humidity/si7020.c @@ -121,7 +121,7 @@ static int si7020_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE | I2C_FUNC_SMBUS_READ_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; /* Reset device, loads default settings. */ ret = i2c_smbus_write_byte(client, SI7020CMD_RESET); @@ -149,6 +149,7 @@ static int si7020_probe(struct i2c_client *client, static const struct i2c_device_id si7020_id[] = { { "si7020", 0 }, + { "th06", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, si7020_id); diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 8f8d137..847455a 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -3,15 +3,30 @@ # config INV_MPU6050_IIO - tristate "Invensense MPU6050 devices" - depends on I2C && SYSFS - depends on I2C_MUX + tristate select IIO_BUFFER select IIO_TRIGGERED_BUFFER + +config INV_MPU6050_I2C + tristate "Invensense MPU6050 devices (I2C)" + depends on I2C_MUX + select INV_MPU6050_IIO + select REGMAP_I2C help This driver supports the Invensense MPU6050 devices. This driver can also support MPU6500 in MPU6050 compatibility mode and also in MPU6500 mode with some limitations. It is a gyroscope/accelerometer combo device. This driver can be built as a module. The module will be called - inv-mpu6050. + inv-mpu6050-i2c. + +config INV_MPU6050_SPI + tristate "Invensense MPU6050 devices (SPI)" + depends on SPI_MASTER + select INV_MPU6050_IIO + select REGMAP_SPI + help + This driver supports the Invensense MPU6050 devices. + It is a gyroscope/accelerometer combo device. + This driver can be built as a module. The module will be called + inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile index f566f6a..734af5e 100644 --- a/drivers/iio/imu/inv_mpu6050/Makefile +++ b/drivers/iio/imu/inv_mpu6050/Makefile @@ -3,4 +3,10 @@ # obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o -inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o inv_mpu_acpi.o +inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o + +obj-$(CONFIG_INV_MPU6050_I2C) += inv-mpu6050-i2c.o +inv-mpu6050-i2c-objs := inv_mpu_i2c.o inv_mpu_acpi.o + +obj-$(CONFIG_INV_MPU6050_SPI) += inv-mpu6050-spi.o +inv-mpu6050-spi-objs := inv_mpu_spi.o diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c index 1c982a5..2771106 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c @@ -66,11 +66,11 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, union acpi_object *elem; int j; - elem = &(cpm->package.elements[i]); + elem = &cpm->package.elements[i]; for (j = 0; j < elem->package.count; ++j) { union acpi_object *sub_elem; - sub_elem = &(elem->package.elements[j]); + sub_elem = &elem->package.elements[j]; if (sub_elem->type == ACPI_TYPE_STRING) strlcpy(info->type, sub_elem->string.pointer, sizeof(info->type)); @@ -139,22 +139,23 @@ static int inv_mpu_process_acpi_config(struct i2c_client *client, return 0; } -int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) +int inv_mpu_acpi_create_mux_client(struct i2c_client *client) { + struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev)); st->mux_client = NULL; - if (ACPI_HANDLE(&st->client->dev)) { + if (ACPI_HANDLE(&client->dev)) { struct i2c_board_info info; struct acpi_device *adev; int ret = -1; - adev = ACPI_COMPANION(&st->client->dev); + adev = ACPI_COMPANION(&client->dev); memset(&info, 0, sizeof(info)); dmi_check_system(inv_mpu_dev_list); switch (matched_product_name) { case INV_MPU_ASUS_T100TA: - ret = asus_acpi_get_sensor_info(adev, st->client, + ret = asus_acpi_get_sensor_info(adev, client, &info); break; /* Add more matched product processing here */ @@ -166,7 +167,7 @@ int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) /* No matching DMI, so create device on INV6XX type */ unsigned short primary, secondary; - ret = inv_mpu_process_acpi_config(st->client, &primary, + ret = inv_mpu_process_acpi_config(client, &primary, &secondary); if (!ret && secondary) { char *name; @@ -185,14 +186,15 @@ int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) st->mux_client = i2c_new_device(st->mux_adapter, &info); if (!st->mux_client) return -ENODEV; - } return 0; } -void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st) +void inv_mpu_acpi_delete_mux_client(struct i2c_client *client) { + struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev)); + if (st->mux_client) i2c_unregister_device(st->mux_client); } @@ -200,12 +202,12 @@ void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st) #include "inv_mpu_iio.h" -int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) +int inv_mpu_acpi_create_mux_client(struct i2c_client *client) { return 0; } -void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st) +void inv_mpu_acpi_delete_mux_client(struct i2c_client *client) { } #endif diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index f0e0609..d192953 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -39,6 +39,26 @@ static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724}; */ static const int accel_scale[] = {598, 1196, 2392, 4785}; +static const struct inv_mpu6050_reg_map reg_set_6500 = { + .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, + .lpf = INV_MPU6050_REG_CONFIG, + .user_ctrl = INV_MPU6050_REG_USER_CTRL, + .fifo_en = INV_MPU6050_REG_FIFO_EN, + .gyro_config = INV_MPU6050_REG_GYRO_CONFIG, + .accl_config = INV_MPU6050_REG_ACCEL_CONFIG, + .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H, + .fifo_r_w = INV_MPU6050_REG_FIFO_R_W, + .raw_gyro = INV_MPU6050_REG_RAW_GYRO, + .raw_accl = INV_MPU6050_REG_RAW_ACCEL, + .temperature = INV_MPU6050_REG_TEMPERATURE, + .int_enable = INV_MPU6050_REG_INT_ENABLE, + .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, + .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, + .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, + .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET, + .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, +}; + static const struct inv_mpu6050_reg_map reg_set_6050 = { .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, .lpf = INV_MPU6050_REG_CONFIG, @@ -55,6 +75,8 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = { .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, + .accl_offset = INV_MPU6050_REG_ACCEL_OFFSET, + .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, }; static const struct inv_mpu6050_chip_config chip_config_6050 = { @@ -66,7 +88,13 @@ static const struct inv_mpu6050_chip_config chip_config_6050 = { .accl_fs = INV_MPU6050_FS_02G, }; -static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = { +static const struct inv_mpu6050_hw hw_info[] = { + { + .num_reg = 117, + .name = "MPU6500", + .reg = ®_set_6500, + .config = &chip_config_6050, + }, { .num_reg = 117, .name = "MPU6050", @@ -75,134 +103,53 @@ static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = { }, }; -int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d) -{ - return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d); -} - -/* - * The i2c read/write needs to happen in unlocked mode. As the parent - * adapter is common. If we use locked versions, it will fail as - * the mux adapter will lock the parent i2c adapter, while calling - * select/deselect functions. - */ -static int inv_mpu6050_write_reg_unlocked(struct inv_mpu6050_state *st, - u8 reg, u8 d) -{ - int ret; - u8 buf[2]; - struct i2c_msg msg[1] = { - { - .addr = st->client->addr, - .flags = 0, - .len = sizeof(buf), - .buf = buf, - } - }; - - buf[0] = reg; - buf[1] = d; - ret = __i2c_transfer(st->client->adapter, msg, 1); - if (ret != 1) - return ret; - - return 0; -} - -static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv, - u32 chan_id) -{ - struct iio_dev *indio_dev = mux_priv; - struct inv_mpu6050_state *st = iio_priv(indio_dev); - int ret = 0; - - /* Use the same mutex which was used everywhere to protect power-op */ - mutex_lock(&indio_dev->mlock); - if (!st->powerup_count) { - ret = inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1, - 0); - if (ret) - goto write_error; - - msleep(INV_MPU6050_REG_UP_TIME); - } - if (!ret) { - st->powerup_count++; - ret = inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg, - st->client->irq | - INV_MPU6050_BIT_BYPASS_EN); - } -write_error: - mutex_unlock(&indio_dev->mlock); - - return ret; -} - -static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap, - void *mux_priv, u32 chan_id) -{ - struct iio_dev *indio_dev = mux_priv; - struct inv_mpu6050_state *st = iio_priv(indio_dev); - - mutex_lock(&indio_dev->mlock); - /* It doesn't really mattter, if any of the calls fails */ - inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg, - st->client->irq); - st->powerup_count--; - if (!st->powerup_count) - inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_SLEEP); - mutex_unlock(&indio_dev->mlock); - - return 0; -} - int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) { - u8 d, mgmt_1; + unsigned int d, mgmt_1; int result; - - /* switch clock needs to be careful. Only when gyro is on, can - clock source be switched to gyro. Otherwise, it must be set to - internal clock */ - if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->pwr_mgmt_1, 1, &mgmt_1); - if (result != 1) + /* + * switch clock needs to be careful. Only when gyro is on, can + * clock source be switched to gyro. Otherwise, it must be set to + * internal clock + */ + if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) { + result = regmap_read(st->map, st->reg->pwr_mgmt_1, &mgmt_1); + if (result) return result; mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK; } - if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) { - /* turning off gyro requires switch to internal clock first. - Then turn off gyro engine */ + if ((mask == INV_MPU6050_BIT_PWR_GYRO_STBY) && (!en)) { + /* + * turning off gyro requires switch to internal clock first. + * Then turn off gyro engine + */ mgmt_1 |= INV_CLK_INTERNAL; - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, mgmt_1); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, mgmt_1); if (result) return result; } - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->pwr_mgmt_2, 1, &d); - if (result != 1) + result = regmap_read(st->map, st->reg->pwr_mgmt_2, &d); + if (result) return result; if (en) d &= ~mask; else d |= mask; - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_2, d); + result = regmap_write(st->map, st->reg->pwr_mgmt_2, d); if (result) return result; if (en) { /* Wait for output stabilize */ msleep(INV_MPU6050_TEMP_UP_TIME); - if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { + if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) { /* switch internal clock to PLL */ mgmt_1 |= INV_CLK_PLL; - result = inv_mpu6050_write_reg(st, - st->reg->pwr_mgmt_1, mgmt_1); + result = regmap_write(st->map, + st->reg->pwr_mgmt_1, mgmt_1); if (result) return result; } @@ -218,25 +165,26 @@ int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on) if (power_on) { /* Already under indio-dev->mlock mutex */ if (!st->powerup_count) - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - 0); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, 0); if (!result) st->powerup_count++; } else { st->powerup_count--; if (!st->powerup_count) - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_SLEEP); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_SLEEP); } if (result) return result; if (power_on) - msleep(INV_MPU6050_REG_UP_TIME); + usleep_range(INV_MPU6050_REG_UP_TIME_MIN, + INV_MPU6050_REG_UP_TIME_MAX); return 0; } +EXPORT_SYMBOL_GPL(inv_mpu6050_set_power_itg); /** * inv_mpu6050_init_config() - Initialize hardware, disable FIFO. @@ -257,59 +205,73 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev) if (result) return result; d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d); + result = regmap_write(st->map, st->reg->gyro_config, d); if (result) return result; d = INV_MPU6050_FILTER_20HZ; - result = inv_mpu6050_write_reg(st, st->reg->lpf, d); + result = regmap_write(st->map, st->reg->lpf, d); if (result) return result; d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1; - result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + result = regmap_write(st->map, st->reg->sample_rate_div, d); if (result) return result; d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->accl_config, d); + result = regmap_write(st->map, st->reg->accl_config, d); if (result) return result; memcpy(&st->chip_config, hw_info[st->chip_type].config, - sizeof(struct inv_mpu6050_chip_config)); + sizeof(struct inv_mpu6050_chip_config)); result = inv_mpu6050_set_power_itg(st, false); return result; } +static int inv_mpu6050_sensor_set(struct inv_mpu6050_state *st, int reg, + int axis, int val) +{ + int ind, result; + __be16 d = cpu_to_be16(val); + + ind = (axis - IIO_MOD_X) * 2; + result = regmap_bulk_write(st->map, reg + ind, (u8 *)&d, 2); + if (result) + return -EINVAL; + + return 0; +} + static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg, - int axis, int *val) + int axis, int *val) { int ind, result; __be16 d; ind = (axis - IIO_MOD_X) * 2; - result = i2c_smbus_read_i2c_block_data(st->client, reg + ind, 2, - (u8 *)&d); - if (result != 2) + result = regmap_bulk_read(st->map, reg + ind, (u8 *)&d, 2); + if (result) return -EINVAL; *val = (short)be16_to_cpup(&d); return IIO_VAL_INT; } -static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask) { +static int +inv_mpu6050_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ struct inv_mpu6050_state *st = iio_priv(indio_dev); + int ret = 0; switch (mask) { case IIO_CHAN_INFO_RAW: { - int ret, result; + int result; ret = IIO_VAL_INT; result = 0; @@ -323,16 +285,16 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_ANGL_VEL: if (!st->chip_config.gyro_fifo_enable || - !st->chip_config.enable) { + !st->chip_config.enable) { result = inv_mpu6050_switch_engine(st, true, INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) goto error_read_raw; } - ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro, - chan->channel2, val); + ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro, + chan->channel2, val); if (!st->chip_config.gyro_fifo_enable || - !st->chip_config.enable) { + !st->chip_config.enable) { result = inv_mpu6050_switch_engine(st, false, INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) @@ -341,16 +303,16 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, break; case IIO_ACCEL: if (!st->chip_config.accl_fifo_enable || - !st->chip_config.enable) { + !st->chip_config.enable) { result = inv_mpu6050_switch_engine(st, true, INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) goto error_read_raw; } ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl, - chan->channel2, val); + chan->channel2, val); if (!st->chip_config.accl_fifo_enable || - !st->chip_config.enable) { + !st->chip_config.enable) { result = inv_mpu6050_switch_engine(st, false, INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) @@ -360,8 +322,8 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, case IIO_TEMP: /* wait for stablization */ msleep(INV_MPU6050_SENSOR_UP_TIME); - inv_mpu6050_sensor_show(st, st->reg->temperature, - IIO_MOD_X, val); + ret = inv_mpu6050_sensor_show(st, st->reg->temperature, + IIO_MOD_X, val); break; default: ret = -EINVAL; @@ -405,6 +367,20 @@ error_read_raw: default: return -EINVAL; } + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ANGL_VEL: + ret = inv_mpu6050_sensor_show(st, st->reg->gyro_offset, + chan->channel2, val); + return IIO_VAL_INT; + case IIO_ACCEL: + ret = inv_mpu6050_sensor_show(st, st->reg->accl_offset, + chan->channel2, val); + return IIO_VAL_INT; + + default: + return -EINVAL; + } default: return -EINVAL; } @@ -418,8 +394,7 @@ static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val) for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) { if (gyro_scale_6050[i] == val) { d = (i << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, - st->reg->gyro_config, d); + result = regmap_write(st->map, st->reg->gyro_config, d); if (result) return result; @@ -448,6 +423,7 @@ static int inv_write_raw_get_fmt(struct iio_dev *indio_dev, return -EINVAL; } + static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) { int result, i; @@ -456,8 +432,7 @@ static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) { if (accel_scale[i] == val) { d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, - st->reg->accl_config, d); + result = regmap_write(st->map, st->reg->accl_config, d); if (result) return result; @@ -470,16 +445,17 @@ static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) } static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) { + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ struct inv_mpu6050_state *st = iio_priv(indio_dev); int result; mutex_lock(&indio_dev->mlock); - /* we should only update scale when the chip is disabled, i.e., - not running */ + /* + * we should only update scale when the chip is disabled, i.e. + * not running + */ if (st->chip_config.enable) { result = -EBUSY; goto error_write_raw; @@ -502,6 +478,21 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, break; } break; + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ANGL_VEL: + result = inv_mpu6050_sensor_set(st, + st->reg->gyro_offset, + chan->channel2, val); + break; + case IIO_ACCEL: + result = inv_mpu6050_sensor_set(st, + st->reg->accl_offset, + chan->channel2, val); + break; + default: + result = -EINVAL; + } default: result = -EINVAL; break; @@ -537,7 +528,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1)) i++; data = d[i]; - result = inv_mpu6050_write_reg(st, st->reg->lpf, data); + result = regmap_write(st->map, st->reg->lpf, data); if (result) return result; st->chip_config.lpf = data; @@ -548,8 +539,9 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) /** * inv_mpu6050_fifo_rate_store() - Set fifo rate. */ -static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t +inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { s32 fifo_rate; u8 d; @@ -560,7 +552,7 @@ static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, if (kstrtoint(buf, 10, &fifo_rate)) return -EINVAL; if (fifo_rate < INV_MPU6050_MIN_FIFO_RATE || - fifo_rate > INV_MPU6050_MAX_FIFO_RATE) + fifo_rate > INV_MPU6050_MAX_FIFO_RATE) return -EINVAL; if (fifo_rate == st->chip_config.fifo_rate) return count; @@ -575,7 +567,7 @@ static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, goto fifo_rate_fail; d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1; - result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + result = regmap_write(st->map, st->reg->sample_rate_div, d); if (result) goto fifo_rate_fail; st->chip_config.fifo_rate = fifo_rate; @@ -596,8 +588,9 @@ fifo_rate_fail: /** * inv_fifo_rate_show() - Get the current sampling rate. */ -static ssize_t inv_fifo_rate_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t +inv_fifo_rate_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev)); @@ -608,16 +601,18 @@ static ssize_t inv_fifo_rate_show(struct device *dev, * inv_attr_show() - calling this function will show current * parameters. */ -static ssize_t inv_attr_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t inv_attr_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev)); struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); s8 *m; switch (this_attr->address) { - /* In MPU6050, the two matrix are the same because gyro and accel - are integrated in one chip */ + /* + * In MPU6050, the two matrix are the same because gyro and accel + * are integrated in one chip + */ case ATTR_GYRO_MATRIX: case ATTR_ACCL_MATRIX: m = st->plat_data.orientation; @@ -654,14 +649,15 @@ static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev, .type = _type, \ .modified = 1, \ .channel2 = _channel2, \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS), \ .scan_index = _index, \ .scan_type = { \ .sign = 's', \ .realbits = 16, \ .storagebits = 16, \ - .shift = 0 , \ + .shift = 0, \ .endianness = IIO_BE, \ }, \ } @@ -674,7 +670,7 @@ static const struct iio_chan_spec inv_mpu_channels[] = { */ { .type = IIO_TEMP, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), .scan_index = -1, @@ -727,25 +723,25 @@ static const struct iio_info mpu_info = { /** * inv_check_and_setup_chip() - check and setup chip. */ -static int inv_check_and_setup_chip(struct inv_mpu6050_state *st, - const struct i2c_device_id *id) +static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) { int result; - st->chip_type = INV_MPU6050; st->hw = &hw_info[st->chip_type]; st->reg = hw_info[st->chip_type].reg; /* reset to make sure previous state are not there */ - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_H_RESET); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_H_RESET); if (result) return result; msleep(INV_MPU6050_POWER_UP_TIME); - /* toggle power state. After reset, the sleep bit could be on - or off depending on the OTP settings. Toggling power would - make it in a definite state as well as making the hardware - state align with the software state */ + /* + * toggle power state. After reset, the sleep bit could be on + * or off depending on the OTP settings. Toggling power would + * make it in a definite state as well as making the hardware + * state align with the software state + */ result = inv_mpu6050_set_power_itg(st, false); if (result) return result; @@ -754,65 +750,59 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st, return result; result = inv_mpu6050_switch_engine(st, false, - INV_MPU6050_BIT_PWR_ACCL_STBY); + INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) return result; result = inv_mpu6050_switch_engine(st, false, - INV_MPU6050_BIT_PWR_GYRO_STBY); + INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) return result; return 0; } -/** - * inv_mpu_probe() - probe function. - * @client: i2c client. - * @id: i2c device id. - * - * Returns 0 on success, a negative error code otherwise. - */ -static int inv_mpu_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, + int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type) { struct inv_mpu6050_state *st; struct iio_dev *indio_dev; struct inv_mpu6050_platform_data *pdata; + struct device *dev = regmap_get_device(regmap); int result; - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_I2C_BLOCK)) - return -ENOSYS; - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); if (!indio_dev) return -ENOMEM; st = iio_priv(indio_dev); - st->client = client; + st->chip_type = chip_type; st->powerup_count = 0; - pdata = dev_get_platdata(&client->dev); + st->irq = irq; + st->map = regmap; + pdata = dev_get_platdata(dev); if (pdata) st->plat_data = *pdata; /* power is turned on inside check chip type*/ - result = inv_check_and_setup_chip(st, id); + result = inv_check_and_setup_chip(st); if (result) return result; + if (inv_mpu_bus_setup) + inv_mpu_bus_setup(indio_dev); + result = inv_mpu6050_init_config(indio_dev); if (result) { - dev_err(&client->dev, - "Could not initialize device.\n"); + dev_err(dev, "Could not initialize device.\n"); return result; } - i2c_set_clientdata(client, indio_dev); - indio_dev->dev.parent = &client->dev; - /* id will be NULL when enumerated via ACPI */ - if (id) - indio_dev->name = (char *)id->name; + dev_set_drvdata(dev, indio_dev); + indio_dev->dev.parent = dev; + /* name will be NULL when enumerated via ACPI */ + if (name) + indio_dev->name = name; else - indio_dev->name = (char *)dev_name(&client->dev); + indio_dev->name = dev_name(dev); indio_dev->channels = inv_mpu_channels; indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels); @@ -824,13 +814,12 @@ static int inv_mpu_probe(struct i2c_client *client, inv_mpu6050_read_fifo, NULL); if (result) { - dev_err(&st->client->dev, "configure buffer fail %d\n", - result); + dev_err(dev, "configure buffer fail %d\n", result); return result; } result = inv_mpu6050_probe_trigger(indio_dev); if (result) { - dev_err(&st->client->dev, "trigger probe fail %d\n", result); + dev_err(dev, "trigger probe fail %d\n", result); goto out_unreg_ring; } @@ -838,102 +827,47 @@ static int inv_mpu_probe(struct i2c_client *client, spin_lock_init(&st->time_stamp_lock); result = iio_device_register(indio_dev); if (result) { - dev_err(&st->client->dev, "IIO register fail %d\n", result); + dev_err(dev, "IIO register fail %d\n", result); goto out_remove_trigger; } - st->mux_adapter = i2c_add_mux_adapter(client->adapter, - &client->dev, - indio_dev, - 0, 0, 0, - inv_mpu6050_select_bypass, - inv_mpu6050_deselect_bypass); - if (!st->mux_adapter) { - result = -ENODEV; - goto out_unreg_device; - } - - result = inv_mpu_acpi_create_mux_client(st); - if (result) - goto out_del_mux; - return 0; -out_del_mux: - i2c_del_mux_adapter(st->mux_adapter); -out_unreg_device: - iio_device_unregister(indio_dev); out_remove_trigger: inv_mpu6050_remove_trigger(st); out_unreg_ring: iio_triggered_buffer_cleanup(indio_dev); return result; } +EXPORT_SYMBOL_GPL(inv_mpu_core_probe); -static int inv_mpu_remove(struct i2c_client *client) +int inv_mpu_core_remove(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(client); - struct inv_mpu6050_state *st = iio_priv(indio_dev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); - inv_mpu_acpi_delete_mux_client(st); - i2c_del_mux_adapter(st->mux_adapter); iio_device_unregister(indio_dev); - inv_mpu6050_remove_trigger(st); + inv_mpu6050_remove_trigger(iio_priv(indio_dev)); iio_triggered_buffer_cleanup(indio_dev); return 0; } +EXPORT_SYMBOL_GPL(inv_mpu_core_remove); + #ifdef CONFIG_PM_SLEEP static int inv_mpu_resume(struct device *dev) { - return inv_mpu6050_set_power_itg( - iio_priv(i2c_get_clientdata(to_i2c_client(dev))), true); + return inv_mpu6050_set_power_itg(iio_priv(dev_get_drvdata(dev)), true); } static int inv_mpu_suspend(struct device *dev) { - return inv_mpu6050_set_power_itg( - iio_priv(i2c_get_clientdata(to_i2c_client(dev))), false); + return inv_mpu6050_set_power_itg(iio_priv(dev_get_drvdata(dev)), false); } -static SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume); - -#define INV_MPU6050_PMOPS (&inv_mpu_pmops) -#else -#define INV_MPU6050_PMOPS NULL #endif /* CONFIG_PM_SLEEP */ -/* - * device id table is used to identify what device can be - * supported by this driver - */ -static const struct i2c_device_id inv_mpu_id[] = { - {"mpu6050", INV_MPU6050}, - {"mpu6500", INV_MPU6500}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, inv_mpu_id); - -static const struct acpi_device_id inv_acpi_match[] = { - {"INVN6500", 0}, - { }, -}; - -MODULE_DEVICE_TABLE(acpi, inv_acpi_match); - -static struct i2c_driver inv_mpu_driver = { - .probe = inv_mpu_probe, - .remove = inv_mpu_remove, - .id_table = inv_mpu_id, - .driver = { - .name = "inv-mpu6050", - .pm = INV_MPU6050_PMOPS, - .acpi_match_table = ACPI_PTR(inv_acpi_match), - }, -}; - -module_i2c_driver(inv_mpu_driver); +SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume); +EXPORT_SYMBOL_GPL(inv_mpu_pmops); MODULE_AUTHOR("Invensense Corporation"); MODULE_DESCRIPTION("Invensense device MPU6050 driver"); diff --git b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c new file mode 100644 index 0000000..f581256 --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -0,0 +1,208 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include "inv_mpu_iio.h" + +static const struct regmap_config inv_mpu_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +/* + * The i2c read/write needs to happen in unlocked mode. As the parent + * adapter is common. If we use locked versions, it will fail as + * the mux adapter will lock the parent i2c adapter, while calling + * select/deselect functions. + */ +static int inv_mpu6050_write_reg_unlocked(struct i2c_client *client, + u8 reg, u8 d) +{ + int ret; + u8 buf[2] = {reg, d}; + struct i2c_msg msg[1] = { + { + .addr = client->addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + ret = __i2c_transfer(client->adapter, msg, 1); + if (ret != 1) + return ret; + + return 0; +} + +static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv, + u32 chan_id) +{ + struct i2c_client *client = mux_priv; + struct iio_dev *indio_dev = dev_get_drvdata(&client->dev); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int ret = 0; + + /* Use the same mutex which was used everywhere to protect power-op */ + mutex_lock(&indio_dev->mlock); + if (!st->powerup_count) { + ret = inv_mpu6050_write_reg_unlocked(client, + st->reg->pwr_mgmt_1, 0); + if (ret) + goto write_error; + + usleep_range(INV_MPU6050_REG_UP_TIME_MIN, + INV_MPU6050_REG_UP_TIME_MAX); + } + if (!ret) { + st->powerup_count++; + ret = inv_mpu6050_write_reg_unlocked(client, + st->reg->int_pin_cfg, + INV_MPU6050_INT_PIN_CFG | + INV_MPU6050_BIT_BYPASS_EN); + } +write_error: + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap, + void *mux_priv, u32 chan_id) +{ + struct i2c_client *client = mux_priv; + struct iio_dev *indio_dev = dev_get_drvdata(&client->dev); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + /* It doesn't really mattter, if any of the calls fails */ + inv_mpu6050_write_reg_unlocked(client, st->reg->int_pin_cfg, + INV_MPU6050_INT_PIN_CFG); + st->powerup_count--; + if (!st->powerup_count) + inv_mpu6050_write_reg_unlocked(client, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_SLEEP); + mutex_unlock(&indio_dev->mlock); + + return 0; +} + +/** + * inv_mpu_probe() - probe function. + * @client: i2c client. + * @id: i2c device id. + * + * Returns 0 on success, a negative error code otherwise. + */ +static int inv_mpu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct inv_mpu6050_state *st; + int result; + const char *name = id ? id->name : NULL; + struct regmap *regmap; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_I2C_BLOCK)) + return -EOPNOTSUPP; + + regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to register i2c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + result = inv_mpu_core_probe(regmap, client->irq, name, + NULL, id->driver_data); + if (result < 0) + return result; + + st = iio_priv(dev_get_drvdata(&client->dev)); + st->mux_adapter = i2c_add_mux_adapter(client->adapter, + &client->dev, + client, + 0, 0, 0, + inv_mpu6050_select_bypass, + inv_mpu6050_deselect_bypass); + if (!st->mux_adapter) { + result = -ENODEV; + goto out_unreg_device; + } + + result = inv_mpu_acpi_create_mux_client(client); + if (result) + goto out_del_mux; + + return 0; + +out_del_mux: + i2c_del_mux_adapter(st->mux_adapter); +out_unreg_device: + inv_mpu_core_remove(&client->dev); + return result; +} + +static int inv_mpu_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + inv_mpu_acpi_delete_mux_client(client); + i2c_del_mux_adapter(st->mux_adapter); + + return inv_mpu_core_remove(&client->dev); +} + +/* + * device id table is used to identify what device can be + * supported by this driver + */ +static const struct i2c_device_id inv_mpu_id[] = { + {"mpu6050", INV_MPU6050}, + {"mpu6500", INV_MPU6500}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, inv_mpu_id); + +static const struct acpi_device_id inv_acpi_match[] = { + {"INVN6500", 0}, + { }, +}; + +MODULE_DEVICE_TABLE(acpi, inv_acpi_match); + +static struct i2c_driver inv_mpu_driver = { + .probe = inv_mpu_probe, + .remove = inv_mpu_remove, + .id_table = inv_mpu_id, + .driver = { + .acpi_match_table = ACPI_PTR(inv_acpi_match), + .name = "inv-mpu6050-i2c", + .pm = &inv_mpu_pmops, + }, +}; + +module_i2c_driver(inv_mpu_driver); + +MODULE_AUTHOR("Invensense Corporation"); +MODULE_DESCRIPTION("Invensense device MPU6050 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index db0a4a2..e302a49 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -38,6 +39,9 @@ * @int_enable: Interrupt enable register. * @pwr_mgmt_1: Controls chip's power state and clock source. * @pwr_mgmt_2: Controls power state of individual sensors. + * @int_pin_cfg; Controls interrupt pin configuration. + * @accl_offset: Controls the accelerometer calibration offset. + * @gyro_offset: Controls the gyroscope calibration offset. */ struct inv_mpu6050_reg_map { u8 sample_rate_div; @@ -55,12 +59,15 @@ struct inv_mpu6050_reg_map { u8 pwr_mgmt_1; u8 pwr_mgmt_2; u8 int_pin_cfg; + u8 accl_offset; + u8 gyro_offset; }; /*device enum */ enum inv_devices { INV_MPU6050, INV_MPU6500, + INV_MPU6000, INV_NUM_PARTS }; @@ -107,9 +114,10 @@ struct inv_mpu6050_hw { * @hw: Other hardware-specific information. * @chip_type: chip type. * @time_stamp_lock: spin lock to time stamp. - * @client: i2c client handle. * @plat_data: platform data. * @timestamps: kfifo queue to store time stamp. + * @map regmap pointer. + * @irq interrupt number. */ struct inv_mpu6050_state { #define TIMESTAMP_FIFO_SIZE 16 @@ -119,15 +127,19 @@ struct inv_mpu6050_state { const struct inv_mpu6050_hw *hw; enum inv_devices chip_type; spinlock_t time_stamp_lock; - struct i2c_client *client; struct i2c_adapter *mux_adapter; struct i2c_client *mux_client; unsigned int powerup_count; struct inv_mpu6050_platform_data plat_data; DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); + struct regmap *map; + int irq; }; /*register and associated bit definition*/ +#define INV_MPU6050_REG_ACCEL_OFFSET 0x06 +#define INV_MPU6050_REG_GYRO_OFFSET 0x13 + #define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19 #define INV_MPU6050_REG_CONFIG 0x1A #define INV_MPU6050_REG_GYRO_CONFIG 0x1B @@ -151,6 +163,7 @@ struct inv_mpu6050_state { #define INV_MPU6050_BIT_I2C_MST_EN 0x20 #define INV_MPU6050_BIT_FIFO_EN 0x40 #define INV_MPU6050_BIT_DMP_EN 0x80 +#define INV_MPU6050_BIT_I2C_IF_DIS 0x10 #define INV_MPU6050_REG_PWR_MGMT_1 0x6B #define INV_MPU6050_BIT_H_RESET 0x80 @@ -167,10 +180,18 @@ struct inv_mpu6050_state { #define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6 #define INV_MPU6050_FIFO_COUNT_BYTE 2 #define INV_MPU6050_FIFO_THRESHOLD 500 + +/* mpu6500 registers */ +#define INV_MPU6500_REG_ACCEL_OFFSET 0x77 + +/* delay time in milliseconds */ #define INV_MPU6050_POWER_UP_TIME 100 #define INV_MPU6050_TEMP_UP_TIME 100 #define INV_MPU6050_SENSOR_UP_TIME 30 -#define INV_MPU6050_REG_UP_TIME 5 + +/* delay time in microseconds */ +#define INV_MPU6050_REG_UP_TIME_MIN 5000 +#define INV_MPU6050_REG_UP_TIME_MAX 10000 #define INV_MPU6050_TEMP_OFFSET 12421 #define INV_MPU6050_TEMP_SCALE 2941 @@ -185,6 +206,7 @@ struct inv_mpu6050_state { #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_BIT_BYPASS_EN 0x2 +#define INV_MPU6050_INT_PIN_CFG 0 /* init parameters */ #define INV_MPU6050_INIT_FIFO_RATE 50 @@ -252,5 +274,10 @@ int inv_reset_fifo(struct iio_dev *indio_dev); int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask); int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on); -int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st); -void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st); +int inv_mpu_acpi_create_mux_client(struct i2c_client *client); +void inv_mpu_acpi_delete_mux_client(struct i2c_client *client); +int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, + int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type); +int inv_mpu_core_remove(struct device *dev); +int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on); +extern const struct dev_pm_ops inv_mpu_pmops; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index ba27e27..d070062 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -13,7 +13,6 @@ #include #include -#include #include #include #include @@ -41,23 +40,24 @@ int inv_reset_fifo(struct iio_dev *indio_dev) struct inv_mpu6050_state *st = iio_priv(indio_dev); /* disable interrupt */ - result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0); + result = regmap_write(st->map, st->reg->int_enable, 0); if (result) { - dev_err(&st->client->dev, "int_enable failed %d\n", result); + dev_err(regmap_get_device(st->map), "int_enable failed %d\n", + result); return result; } /* disable the sensor output to FIFO */ - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0); + result = regmap_write(st->map, st->reg->fifo_en, 0); if (result) goto reset_fifo_fail; /* disable fifo reading */ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0); + result = regmap_write(st->map, st->reg->user_ctrl, 0); if (result) goto reset_fifo_fail; /* reset FIFO*/ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, - INV_MPU6050_BIT_FIFO_RST); + result = regmap_write(st->map, st->reg->user_ctrl, + INV_MPU6050_BIT_FIFO_RST); if (result) goto reset_fifo_fail; @@ -67,14 +67,14 @@ int inv_reset_fifo(struct iio_dev *indio_dev) /* enable interrupt */ if (st->chip_config.accl_fifo_enable || st->chip_config.gyro_fifo_enable) { - result = inv_mpu6050_write_reg(st, st->reg->int_enable, - INV_MPU6050_BIT_DATA_RDY_EN); + result = regmap_write(st->map, st->reg->int_enable, + INV_MPU6050_BIT_DATA_RDY_EN); if (result) return result; } /* enable FIFO reading and I2C master interface*/ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, - INV_MPU6050_BIT_FIFO_EN); + result = regmap_write(st->map, st->reg->user_ctrl, + INV_MPU6050_BIT_FIFO_EN); if (result) goto reset_fifo_fail; /* enable sensor output to FIFO */ @@ -83,16 +83,16 @@ int inv_reset_fifo(struct iio_dev *indio_dev) d |= INV_MPU6050_BITS_GYRO_OUT; if (st->chip_config.accl_fifo_enable) d |= INV_MPU6050_BIT_ACCEL_OUT; - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, d); + result = regmap_write(st->map, st->reg->fifo_en, d); if (result) goto reset_fifo_fail; return 0; reset_fifo_fail: - dev_err(&st->client->dev, "reset fifo failed %d\n", result); - result = inv_mpu6050_write_reg(st, st->reg->int_enable, - INV_MPU6050_BIT_DATA_RDY_EN); + dev_err(regmap_get_device(st->map), "reset fifo failed %d\n", result); + result = regmap_write(st->map, st->reg->int_enable, + INV_MPU6050_BIT_DATA_RDY_EN); return result; } @@ -109,7 +109,7 @@ irqreturn_t inv_mpu6050_irq_handler(int irq, void *p) timestamp = iio_get_time_ns(); kfifo_in_spinlocked(&st->timestamps, ×tamp, 1, - &st->time_stamp_lock); + &st->time_stamp_lock); return IRQ_WAKE_THREAD; } @@ -143,10 +143,9 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) * read fifo_count register to know how many bytes inside FIFO * right now */ - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->fifo_count_h, - INV_MPU6050_FIFO_COUNT_BYTE, data); - if (result != INV_MPU6050_FIFO_COUNT_BYTE) + result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, + INV_MPU6050_FIFO_COUNT_BYTE); + if (result) goto end_session; fifo_count = be16_to_cpup((__be16 *)(&data[0])); if (fifo_count < bytes_per_datum) @@ -158,22 +157,21 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) goto flush_fifo; /* Timestamp mismatch. */ if (kfifo_len(&st->timestamps) > - fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR) - goto flush_fifo; + fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR) + goto flush_fifo; while (fifo_count >= bytes_per_datum) { - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->fifo_r_w, - bytes_per_datum, data); - if (result != bytes_per_datum) + result = regmap_bulk_read(st->map, st->reg->fifo_r_w, + data, bytes_per_datum); + if (result) goto flush_fifo; result = kfifo_out(&st->timestamps, ×tamp, 1); /* when there is no timestamp, put timestamp as 0 */ - if (0 == result) + if (result == 0) timestamp = 0; result = iio_push_to_buffers_with_timestamp(indio_dev, data, - timestamp); + timestamp); if (result) goto flush_fifo; fifo_count -= bytes_per_datum; diff --git b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c new file mode 100644 index 0000000..dea6c43 --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -0,0 +1,98 @@ +/* +* Copyright (C) 2015 Intel Corporation Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ +#include +#include +#include +#include +#include +#include "inv_mpu_iio.h" + +static const struct regmap_config inv_mpu_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int inv_mpu_i2c_disable(struct iio_dev *indio_dev) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int ret = 0; + + ret = inv_mpu6050_set_power_itg(st, true); + if (ret) + return ret; + + ret = regmap_write(st->map, INV_MPU6050_REG_USER_CTRL, + INV_MPU6050_BIT_I2C_IF_DIS); + if (ret) { + inv_mpu6050_set_power_itg(st, false); + return ret; + } + + return inv_mpu6050_set_power_itg(st, false); +} + +static int inv_mpu_probe(struct spi_device *spi) +{ + struct regmap *regmap; + const struct spi_device_id *id = spi_get_device_id(spi); + const char *name = id ? id->name : NULL; + + regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return inv_mpu_core_probe(regmap, spi->irq, name, + inv_mpu_i2c_disable, id->driver_data); +} + +static int inv_mpu_remove(struct spi_device *spi) +{ + return inv_mpu_core_remove(&spi->dev); +} + +/* + * device id table is used to identify what device can be + * supported by this driver + */ +static const struct spi_device_id inv_mpu_id[] = { + {"mpu6000", INV_MPU6000}, + {} +}; + +MODULE_DEVICE_TABLE(spi, inv_mpu_id); + +static const struct acpi_device_id inv_acpi_match[] = { + {"INVN6000", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, inv_acpi_match); + +static struct spi_driver inv_mpu_driver = { + .probe = inv_mpu_probe, + .remove = inv_mpu_remove, + .id_table = inv_mpu_id, + .driver = { + .acpi_match_table = ACPI_PTR(inv_acpi_match), + .name = "inv-mpu6000-spi", + .pm = &inv_mpu_pmops, + }, +}; + +module_spi_driver(inv_mpu_driver); + +MODULE_AUTHOR("Adriana Reus "); +MODULE_DESCRIPTION("Invensense device MPU6000 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c index 844610c..e8818d4 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -19,19 +19,19 @@ static void inv_scan_query(struct iio_dev *indio_dev) st->chip_config.gyro_fifo_enable = test_bit(INV_MPU6050_SCAN_GYRO_X, - indio_dev->active_scan_mask) || - test_bit(INV_MPU6050_SCAN_GYRO_Y, - indio_dev->active_scan_mask) || - test_bit(INV_MPU6050_SCAN_GYRO_Z, - indio_dev->active_scan_mask); + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_GYRO_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_GYRO_Z, + indio_dev->active_scan_mask); st->chip_config.accl_fifo_enable = test_bit(INV_MPU6050_SCAN_ACCL_X, - indio_dev->active_scan_mask) || - test_bit(INV_MPU6050_SCAN_ACCL_Y, - indio_dev->active_scan_mask) || - test_bit(INV_MPU6050_SCAN_ACCL_Z, - indio_dev->active_scan_mask); + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_ACCL_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_ACCL_Z, + indio_dev->active_scan_mask); } /** @@ -65,15 +65,15 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable) if (result) return result; } else { - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0); + result = regmap_write(st->map, st->reg->fifo_en, 0); if (result) return result; - result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0); + result = regmap_write(st->map, st->reg->int_enable, 0); if (result) return result; - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0); + result = regmap_write(st->map, st->reg->user_ctrl, 0); if (result) return result; @@ -101,7 +101,7 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable) * @state: Desired trigger state */ static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig, - bool state) + bool state) { return inv_mpu6050_set_enable(iio_trigger_get_drvdata(trig), state); } @@ -123,7 +123,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) if (!st->trig) return -ENOMEM; - ret = devm_request_irq(&indio_dev->dev, st->client->irq, + ret = devm_request_irq(&indio_dev->dev, st->irq, &iio_trigger_generic_data_rdy_poll, IRQF_TRIGGER_RISING, "inv_mpu", @@ -131,7 +131,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) if (ret) return ret; - st->trig->dev.parent = &st->client->dev; + st->trig->dev.parent = regmap_get_device(st->map); st->trig->ops = &inv_mpu_trigger_ops; iio_trigger_set_drvdata(st->trig, indio_dev); diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 5b6abc5..90462fc 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -512,33 +512,41 @@ static ssize_t iio_buffer_show_enable(struct device *dev, return sprintf(buf, "%d\n", iio_buffer_is_active(indio_dev->buffer)); } +static unsigned int iio_storage_bytes_for_si(struct iio_dev *indio_dev, + unsigned int scan_index) +{ + const struct iio_chan_spec *ch; + unsigned int bytes; + + ch = iio_find_channel_from_si(indio_dev, scan_index); + bytes = ch->scan_type.storagebits / 8; + if (ch->scan_type.repeat > 1) + bytes *= ch->scan_type.repeat; + return bytes; +} + +static unsigned int iio_storage_bytes_for_timestamp(struct iio_dev *indio_dev) +{ + return iio_storage_bytes_for_si(indio_dev, + indio_dev->scan_index_timestamp); +} + static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const unsigned long *mask, bool timestamp) { - const struct iio_chan_spec *ch; unsigned bytes = 0; int length, i; /* How much space will the demuxed element take? */ for_each_set_bit(i, mask, indio_dev->masklength) { - ch = iio_find_channel_from_si(indio_dev, i); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_si(indio_dev, i); bytes = ALIGN(bytes, length); bytes += length; } + if (timestamp) { - ch = iio_find_channel_from_si(indio_dev, - indio_dev->scan_index_timestamp); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_timestamp(indio_dev); bytes = ALIGN(bytes, length); bytes += length; } @@ -1289,7 +1297,6 @@ static int iio_buffer_add_demux(struct iio_buffer *buffer, static int iio_buffer_update_demux(struct iio_dev *indio_dev, struct iio_buffer *buffer) { - const struct iio_chan_spec *ch; int ret, in_ind = -1, out_ind, length; unsigned in_loc = 0, out_loc = 0; struct iio_demux_table *p = NULL; @@ -1316,21 +1323,11 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev, in_ind = find_next_bit(indio_dev->active_scan_mask, indio_dev->masklength, in_ind + 1); - ch = iio_find_channel_from_si(indio_dev, in_ind); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_si(indio_dev, in_ind); /* Make sure we are aligned */ in_loc = roundup(in_loc, length) + length; } - ch = iio_find_channel_from_si(indio_dev, in_ind); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_si(indio_dev, in_ind); out_loc = roundup(out_loc, length); in_loc = roundup(in_loc, length); ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length); @@ -1341,13 +1338,7 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev, } /* Relies on scan_timestamp being last */ if (buffer->scan_timestamp) { - ch = iio_find_channel_from_si(indio_dev, - indio_dev->scan_index_timestamp); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_timestamp(indio_dev); out_loc = roundup(out_loc, length); in_loc = roundup(in_loc, length); ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length); diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index af7cc1e..70cb7eb 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -77,6 +77,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_VELOCITY] = "velocity", [IIO_CONCENTRATION] = "concentration", [IIO_RESISTANCE] = "resistance", + [IIO_PH] = "ph", }; static const char * const iio_modifier_names[] = { diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c index f6a07dc..a6af56a 100644 --- a/drivers/iio/light/apds9960.c +++ b/drivers/iio/light/apds9960.c @@ -769,7 +769,7 @@ static void apds9960_read_gesture_fifo(struct apds9960_data *data) mutex_lock(&data->lock); data->gesture_mode_running = 1; - while (cnt-- || (cnt = apds9660_fifo_is_empty(data) > 0)) { + while (cnt || (cnt = apds9660_fifo_is_empty(data) > 0)) { ret = regmap_bulk_read(data->regmap, APDS9960_REG_GFIFO_BASE, &data->buffer, 4); @@ -777,6 +777,7 @@ static void apds9960_read_gesture_fifo(struct apds9960_data *data) goto err_read; iio_push_to_buffers(data->indio_dev, data->buffer); + cnt--; } err_read: diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c index 8b41643..b059466 100644 --- a/drivers/iio/light/bh1750.c +++ b/drivers/iio/light/bh1750.c @@ -241,7 +241,7 @@ static int bh1750_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c index c4e8c6b..99a6281 100644 --- a/drivers/iio/light/jsa1212.c +++ b/drivers/iio/light/jsa1212.c @@ -326,7 +326,7 @@ static int jsa1212_probe(struct i2c_client *client, int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c index 01e111e..b776c8e 100644 --- a/drivers/iio/light/opt3001.c +++ b/drivers/iio/light/opt3001.c @@ -65,19 +65,25 @@ #define OPT3001_REG_EXPONENT(n) ((n) >> 12) #define OPT3001_REG_MANTISSA(n) ((n) & 0xfff) +#define OPT3001_INT_TIME_LONG 800000 +#define OPT3001_INT_TIME_SHORT 100000 + /* * Time to wait for conversion result to be ready. The device datasheet - * worst-case max value is 880ms. Add some slack to be on the safe side. + * sect. 6.5 states results are ready after total integration time plus 3ms. + * This results in worst-case max values of 113ms or 883ms, respectively. + * Add some slack to be on the safe side. */ -#define OPT3001_RESULT_READY_TIMEOUT msecs_to_jiffies(1000) +#define OPT3001_RESULT_READY_SHORT 150 +#define OPT3001_RESULT_READY_LONG 1000 struct opt3001 { struct i2c_client *client; struct device *dev; struct mutex lock; - u16 ok_to_ignore_lock:1; - u16 result_ready:1; + bool ok_to_ignore_lock; + bool result_ready; wait_queue_head_t result_ready_queue; u16 result; @@ -89,6 +95,8 @@ struct opt3001 { u8 high_thresh_exp; u8 low_thresh_exp; + + bool use_irq; }; struct opt3001_scale { @@ -227,26 +235,30 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2) u16 reg; u8 exponent; u16 value; + long timeout; - /* - * Enable the end-of-conversion interrupt mechanism. Note that doing - * so will overwrite the low-level limit value however we will restore - * this value later on. - */ - ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT, - OPT3001_LOW_LIMIT_EOC_ENABLE); - if (ret < 0) { - dev_err(opt->dev, "failed to write register %02x\n", - OPT3001_LOW_LIMIT); - return ret; + if (opt->use_irq) { + /* + * Enable the end-of-conversion interrupt mechanism. Note that + * doing so will overwrite the low-level limit value however we + * will restore this value later on. + */ + ret = i2c_smbus_write_word_swapped(opt->client, + OPT3001_LOW_LIMIT, + OPT3001_LOW_LIMIT_EOC_ENABLE); + if (ret < 0) { + dev_err(opt->dev, "failed to write register %02x\n", + OPT3001_LOW_LIMIT); + return ret; + } + + /* Allow IRQ to access the device despite lock being set */ + opt->ok_to_ignore_lock = true; } - /* Reset data-ready indicator flag (will be set in the IRQ routine) */ + /* Reset data-ready indicator flag */ opt->result_ready = false; - /* Allow IRQ to access the device despite lock being set */ - opt->ok_to_ignore_lock = true; - /* Configure for single-conversion mode and start a new conversion */ ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION); if (ret < 0) { @@ -266,32 +278,69 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2) goto err; } - /* Wait for the IRQ to indicate the conversion is complete */ - ret = wait_event_timeout(opt->result_ready_queue, opt->result_ready, - OPT3001_RESULT_READY_TIMEOUT); + if (opt->use_irq) { + /* Wait for the IRQ to indicate the conversion is complete */ + ret = wait_event_timeout(opt->result_ready_queue, + opt->result_ready, + msecs_to_jiffies(OPT3001_RESULT_READY_LONG)); + } else { + /* Sleep for result ready time */ + timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ? + OPT3001_RESULT_READY_SHORT : OPT3001_RESULT_READY_LONG; + msleep(timeout); + + /* Check result ready flag */ + ret = i2c_smbus_read_word_swapped(opt->client, + OPT3001_CONFIGURATION); + if (ret < 0) { + dev_err(opt->dev, "failed to read register %02x\n", + OPT3001_CONFIGURATION); + goto err; + } + + if (!(ret & OPT3001_CONFIGURATION_CRF)) { + ret = -ETIMEDOUT; + goto err; + } + + /* Obtain value */ + ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT); + if (ret < 0) { + dev_err(opt->dev, "failed to read register %02x\n", + OPT3001_RESULT); + goto err; + } + opt->result = ret; + opt->result_ready = true; + } err: - /* Disallow IRQ to access the device while lock is active */ - opt->ok_to_ignore_lock = false; + if (opt->use_irq) + /* Disallow IRQ to access the device while lock is active */ + opt->ok_to_ignore_lock = false; if (ret == 0) return -ETIMEDOUT; else if (ret < 0) return ret; - /* - * Disable the end-of-conversion interrupt mechanism by restoring the - * low-level limit value (clearing OPT3001_LOW_LIMIT_EOC_ENABLE). Note - * that selectively clearing those enable bits would affect the actual - * limit value due to bit-overlap and therefore can't be done. - */ - value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa; - ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT, - value); - if (ret < 0) { - dev_err(opt->dev, "failed to write register %02x\n", - OPT3001_LOW_LIMIT); - return ret; + if (opt->use_irq) { + /* + * Disable the end-of-conversion interrupt mechanism by + * restoring the low-level limit value (clearing + * OPT3001_LOW_LIMIT_EOC_ENABLE). Note that selectively clearing + * those enable bits would affect the actual limit value due to + * bit-overlap and therefore can't be done. + */ + value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa; + ret = i2c_smbus_write_word_swapped(opt->client, + OPT3001_LOW_LIMIT, + value); + if (ret < 0) { + dev_err(opt->dev, "failed to write register %02x\n", + OPT3001_LOW_LIMIT); + return ret; + } } exponent = OPT3001_REG_EXPONENT(opt->result); @@ -325,13 +374,13 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time) reg = ret; switch (time) { - case 100000: + case OPT3001_INT_TIME_SHORT: reg &= ~OPT3001_CONFIGURATION_CT; - opt->int_time = 100000; + opt->int_time = OPT3001_INT_TIME_SHORT; break; - case 800000: + case OPT3001_INT_TIME_LONG: reg |= OPT3001_CONFIGURATION_CT; - opt->int_time = 800000; + opt->int_time = OPT3001_INT_TIME_LONG; break; default: return -EINVAL; @@ -597,9 +646,9 @@ static int opt3001_configure(struct opt3001 *opt) /* Reflect status of the device's integration time setting */ if (reg & OPT3001_CONFIGURATION_CT) - opt->int_time = 800000; + opt->int_time = OPT3001_INT_TIME_LONG; else - opt->int_time = 100000; + opt->int_time = OPT3001_INT_TIME_SHORT; /* Ensure device is in shutdown initially */ opt3001_set_mode(opt, ®, OPT3001_CONFIGURATION_M_SHUTDOWN); @@ -733,12 +782,18 @@ static int opt3001_probe(struct i2c_client *client, return ret; } - ret = request_threaded_irq(irq, NULL, opt3001_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "opt3001", iio); - if (ret) { - dev_err(dev, "failed to request IRQ #%d\n", irq); - return ret; + /* Make use of INT pin only if valid IRQ no. is given */ + if (irq > 0) { + ret = request_threaded_irq(irq, NULL, opt3001_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "opt3001", iio); + if (ret) { + dev_err(dev, "failed to request IRQ #%d\n", irq); + return ret; + } + opt->use_irq = true; + } else { + dev_dbg(opt->dev, "enabling interrupt-less operation\n"); } return 0; @@ -751,7 +806,8 @@ static int opt3001_remove(struct i2c_client *client) int ret; u16 reg; - free_irq(client->irq, iio); + if (opt->use_irq) + free_irq(client->irq, iio); ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION); if (ret < 0) { diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 868abad..021dc53 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -105,4 +105,37 @@ config IIO_ST_MAGN_SPI_3AXIS depends on IIO_ST_MAGN_3AXIS depends on IIO_ST_SENSORS_SPI +config SENSORS_HMC5843 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config SENSORS_HMC5843_I2C + tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" + depends on I2C + select SENSORS_HMC5843 + select REGMAP_I2C + help + Say Y here to add support for the Honeywell HMC5843, HMC5883 and + HMC5883L 3-Axis Magnetometer (digital compass). + + This driver can also be compiled as a set of modules. + If so, these modules will be created: + - hmc5843_core (core functions) + - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) + +config SENSORS_HMC5843_SPI + tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" + depends on SPI_MASTER + select SENSORS_HMC5843 + select REGMAP_SPI + help + Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer + (digital compass). + + This driver can also be compiled as a set of modules. + If so, these modules will be created: + - hmc5843_core (core functions) + - hmc5843_spi (support for HMC5983) + endmenu diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index 2c72df4..dd03fe5 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -15,3 +15,7 @@ st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o + +obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o +obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o +obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index b13936d..9c5c9ef 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -252,7 +252,7 @@ struct ak_def { u8 data_regs[3]; }; -static struct ak_def ak_def_array[AK_MAX_TYPE] = { +static const struct ak_def ak_def_array[AK_MAX_TYPE] = { { .type = AK8975, .raw_to_gauss = ak8975_raw_to_gauss, @@ -360,7 +360,7 @@ static struct ak_def ak_def_array[AK_MAX_TYPE] = { */ struct ak8975_data { struct i2c_client *client; - struct ak_def *def; + const struct ak_def *def; struct attribute_group attrs; struct mutex lock; u8 asa[3]; diff --git b/drivers/iio/magnetometer/hmc5843.h b/drivers/iio/magnetometer/hmc5843.h new file mode 100644 index 0000000..76a5d74 --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843.h @@ -0,0 +1,65 @@ +/* + * Header file for hmc5843 driver + * + * Split from hmc5843.c + * Copyright (C) Josef Gajdusek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef HMC5843_CORE_H +#define HMC5843_CORE_H + +#include +#include + +#define HMC5843_CONFIG_REG_A 0x00 +#define HMC5843_CONFIG_REG_B 0x01 +#define HMC5843_MODE_REG 0x02 +#define HMC5843_DATA_OUT_MSB_REGS 0x03 +#define HMC5843_STATUS_REG 0x09 +#define HMC5843_ID_REG 0x0a +#define HMC5843_ID_END 0x0c + +enum hmc5843_ids { + HMC5843_ID, + HMC5883_ID, + HMC5883L_ID, + HMC5983_ID, +}; + +/** + * struct hcm5843_data - device specific data + * @dev: actual device + * @lock: update and read regmap data + * @regmap: hardware access register maps + * @variant: describe chip variants + * @buffer: 3x 16-bit channels + padding + 64-bit timestamp + */ +struct hmc5843_data { + struct device *dev; + struct mutex lock; + struct regmap *regmap; + const struct hmc5843_chip_info *variant; + __be16 buffer[8]; +}; + +int hmc5843_common_probe(struct device *dev, struct regmap *regmap, + enum hmc5843_ids id, const char *name); +int hmc5843_common_remove(struct device *dev); + +int hmc5843_common_suspend(struct device *dev); +int hmc5843_common_resume(struct device *dev); + +#ifdef CONFIG_PM_SLEEP +static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, + hmc5843_common_suspend, + hmc5843_common_resume); +#define HMC5843_PM_OPS (&hmc5843_pm_ops) +#else +#define HMC5843_PM_OPS NULL +#endif + +#endif /* HMC5843_CORE_H */ diff --git b/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c new file mode 100644 index 0000000..77882b4 --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_core.c @@ -0,0 +1,686 @@ +/* + * Device driver for the the HMC5843 multi-chip module designed + * for low field magnetic sensing. + * + * Copyright (C) 2010 Texas Instruments + * + * Author: Shubhrajyoti Datta + * Acknowledgment: Jonathan Cameron for valuable inputs. + * Support for HMC5883 and HMC5883L by Peter Meerwald . + * Split to multiple files by Josef Gajdusek - 2014 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hmc5843.h" + +/* + * Range gain settings in (+-)Ga + * Beware: HMC5843 and HMC5883 have different recommended sensor field + * ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively + */ +#define HMC5843_RANGE_GAIN_OFFSET 0x05 +#define HMC5843_RANGE_GAIN_DEFAULT 0x01 +#define HMC5843_RANGE_GAIN_MASK 0xe0 + +/* Device status */ +#define HMC5843_DATA_READY 0x01 +#define HMC5843_DATA_OUTPUT_LOCK 0x02 + +/* Mode register configuration */ +#define HMC5843_MODE_CONVERSION_CONTINUOUS 0x00 +#define HMC5843_MODE_CONVERSION_SINGLE 0x01 +#define HMC5843_MODE_IDLE 0x02 +#define HMC5843_MODE_SLEEP 0x03 +#define HMC5843_MODE_MASK 0x03 + +/* + * HMC5843: Minimum data output rate + * HMC5883: Typical data output rate + */ +#define HMC5843_RATE_OFFSET 0x02 +#define HMC5843_RATE_DEFAULT 0x04 +#define HMC5843_RATE_MASK 0x1c + +/* Device measurement configuration */ +#define HMC5843_MEAS_CONF_NORMAL 0x00 +#define HMC5843_MEAS_CONF_POSITIVE_BIAS 0x01 +#define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02 +#define HMC5843_MEAS_CONF_MASK 0x03 + +/* + * API for setting the measurement configuration to + * Normal, Positive bias and Negative bias + * + * From the datasheet: + * 0 - Normal measurement configuration (default): In normal measurement + * configuration the device follows normal measurement flow. Pins BP + * and BN are left floating and high impedance. + * + * 1 - Positive bias configuration: In positive bias configuration, a + * positive current is forced across the resistive load on pins BP + * and BN. + * + * 2 - Negative bias configuration. In negative bias configuration, a + * negative current is forced across the resistive load on pins BP + * and BN. + * + * 3 - Only available on HMC5983. Magnetic sensor is disabled. + * Temperature sensor is enabled. + */ + +static const char *const hmc5843_meas_conf_modes[] = {"normal", "positivebias", + "negativebias"}; + +static const char *const hmc5983_meas_conf_modes[] = {"normal", "positivebias", + "negativebias", + "disabled"}; +/* Scaling factors: 10000000/Gain */ +static const int hmc5843_regval_to_nanoscale[] = { + 6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714 +}; + +static const int hmc5883_regval_to_nanoscale[] = { + 7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662 +}; + +static const int hmc5883l_regval_to_nanoscale[] = { + 7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478 +}; + +/* + * From the datasheet: + * Value | HMC5843 | HMC5883/HMC5883L + * | Data output rate (Hz) | Data output rate (Hz) + * 0 | 0.5 | 0.75 + * 1 | 1 | 1.5 + * 2 | 2 | 3 + * 3 | 5 | 7.5 + * 4 | 10 (default) | 15 + * 5 | 20 | 30 + * 6 | 50 | 75 + * 7 | Not used | Not used + */ +static const int hmc5843_regval_to_samp_freq[][2] = { + {0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0} +}; + +static const int hmc5883_regval_to_samp_freq[][2] = { + {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0}, + {75, 0} +}; + +static const int hmc5983_regval_to_samp_freq[][2] = { + {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0}, + {75, 0}, {220, 0} +}; + +/* Describe chip variants */ +struct hmc5843_chip_info { + const struct iio_chan_spec *channels; + const int (*regval_to_samp_freq)[2]; + const int n_regval_to_samp_freq; + const int *regval_to_nanoscale; + const int n_regval_to_nanoscale; +}; + +/* The lower two bits contain the current conversion mode */ +static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_MODE_REG, + HMC5843_MODE_MASK, operating_mode); + mutex_unlock(&data->lock); + + return ret; +} + +static int hmc5843_wait_measurement(struct hmc5843_data *data) +{ + int tries = 150; + unsigned int val; + int ret; + + while (tries-- > 0) { + ret = regmap_read(data->regmap, HMC5843_STATUS_REG, &val); + if (ret < 0) + return ret; + if (val & HMC5843_DATA_READY) + break; + msleep(20); + } + + if (tries < 0) { + dev_err(data->dev, "data not ready\n"); + return -EIO; + } + + return 0; +} + +/* Return the measurement value from the specified channel */ +static int hmc5843_read_measurement(struct hmc5843_data *data, + int idx, int *val) +{ + __be16 values[3]; + int ret; + + mutex_lock(&data->lock); + ret = hmc5843_wait_measurement(data); + if (ret < 0) { + mutex_unlock(&data->lock); + return ret; + } + ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, + values, sizeof(values)); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + + *val = sign_extend32(be16_to_cpu(values[idx]), 15); + return IIO_VAL_INT; +} + +static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, + HMC5843_MEAS_CONF_MASK, meas_conf); + mutex_unlock(&data->lock); + + return ret; +} + +static +int hmc5843_show_measurement_configuration(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val); + if (ret) + return ret; + + return val & HMC5843_MEAS_CONF_MASK; +} + +static +int hmc5843_set_measurement_configuration(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int meas_conf) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + + return hmc5843_set_meas_conf(data, meas_conf); +} + +static const struct iio_enum hmc5843_meas_conf_enum = { + .items = hmc5843_meas_conf_modes, + .num_items = ARRAY_SIZE(hmc5843_meas_conf_modes), + .get = hmc5843_show_measurement_configuration, + .set = hmc5843_set_measurement_configuration, +}; + +static const struct iio_chan_spec_ext_info hmc5843_ext_info[] = { + IIO_ENUM("meas_conf", true, &hmc5843_meas_conf_enum), + IIO_ENUM_AVAILABLE("meas_conf", &hmc5843_meas_conf_enum), + { }, +}; + +static const struct iio_enum hmc5983_meas_conf_enum = { + .items = hmc5983_meas_conf_modes, + .num_items = ARRAY_SIZE(hmc5983_meas_conf_modes), + .get = hmc5843_show_measurement_configuration, + .set = hmc5843_set_measurement_configuration, +}; + +static const struct iio_chan_spec_ext_info hmc5983_ext_info[] = { + IIO_ENUM("meas_conf", true, &hmc5983_meas_conf_enum), + IIO_ENUM_AVAILABLE("meas_conf", &hmc5983_meas_conf_enum), + { }, +}; + +static +ssize_t hmc5843_show_samp_freq_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); + size_t len = 0; + int i; + + for (i = 0; i < data->variant->n_regval_to_samp_freq; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "%d.%d ", data->variant->regval_to_samp_freq[i][0], + data->variant->regval_to_samp_freq[i][1]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail); + +static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, + HMC5843_RATE_MASK, + rate << HMC5843_RATE_OFFSET); + mutex_unlock(&data->lock); + + return ret; +} + +static int hmc5843_get_samp_freq_index(struct hmc5843_data *data, + int val, int val2) +{ + int i; + + for (i = 0; i < data->variant->n_regval_to_samp_freq; i++) + if (val == data->variant->regval_to_samp_freq[i][0] && + val2 == data->variant->regval_to_samp_freq[i][1]) + return i; + + return -EINVAL; +} + +static int hmc5843_set_range_gain(struct hmc5843_data *data, u8 range) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_B, + HMC5843_RANGE_GAIN_MASK, + range << HMC5843_RANGE_GAIN_OFFSET); + mutex_unlock(&data->lock); + + return ret; +} + +static ssize_t hmc5843_show_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); + + size_t len = 0; + int i; + + for (i = 0; i < data->variant->n_regval_to_nanoscale; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "0.%09d ", data->variant->regval_to_nanoscale[i]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEVICE_ATTR(scale_available, S_IRUGO, + hmc5843_show_scale_avail, NULL, 0); + +static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2) +{ + int i; + + if (val) + return -EINVAL; + + for (i = 0; i < data->variant->n_regval_to_nanoscale; i++) + if (val2 == data->variant->regval_to_nanoscale[i]) + return i; + + return -EINVAL; +} + +static int hmc5843_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + unsigned int rval; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return hmc5843_read_measurement(data, chan->scan_index, val); + case IIO_CHAN_INFO_SCALE: + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_B, &rval); + if (ret < 0) + return ret; + rval >>= HMC5843_RANGE_GAIN_OFFSET; + *val = 0; + *val2 = data->variant->regval_to_nanoscale[rval]; + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &rval); + if (ret < 0) + return ret; + rval >>= HMC5843_RATE_OFFSET; + *val = data->variant->regval_to_samp_freq[rval][0]; + *val2 = data->variant->regval_to_samp_freq[rval][1]; + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static int hmc5843_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + int rate, range; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + rate = hmc5843_get_samp_freq_index(data, val, val2); + if (rate < 0) + return -EINVAL; + + return hmc5843_set_samp_freq(data, rate); + case IIO_CHAN_INFO_SCALE: + range = hmc5843_get_scale_index(data, val, val2); + if (range < 0) + return -EINVAL; + + return hmc5843_set_range_gain(data, range); + default: + return -EINVAL; + } +} + +static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static irqreturn_t hmc5843_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct hmc5843_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->lock); + ret = hmc5843_wait_measurement(data); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + + ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, + data->buffer, 3 * sizeof(__be16)); + + mutex_unlock(&data->lock); + if (ret < 0) + goto done; + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns()); + +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +#define HMC5843_CHANNEL(axis, idx) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + .ext_info = hmc5843_ext_info, \ + } + +#define HMC5983_CHANNEL(axis, idx) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + .ext_info = hmc5983_ext_info, \ + } + +static const struct iio_chan_spec hmc5843_channels[] = { + HMC5843_CHANNEL(X, 0), + HMC5843_CHANNEL(Y, 1), + HMC5843_CHANNEL(Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +/* Beware: Y and Z are exchanged on HMC5883 and 5983 */ +static const struct iio_chan_spec hmc5883_channels[] = { + HMC5843_CHANNEL(X, 0), + HMC5843_CHANNEL(Z, 1), + HMC5843_CHANNEL(Y, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_chan_spec hmc5983_channels[] = { + HMC5983_CHANNEL(X, 0), + HMC5983_CHANNEL(Z, 1), + HMC5983_CHANNEL(Y, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static struct attribute *hmc5843_attributes[] = { + &iio_dev_attr_scale_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group hmc5843_group = { + .attrs = hmc5843_attributes, +}; + +static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = { + [HMC5843_ID] = { + .channels = hmc5843_channels, + .regval_to_samp_freq = hmc5843_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5843_regval_to_samp_freq), + .regval_to_nanoscale = hmc5843_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5843_regval_to_nanoscale), + }, + [HMC5883_ID] = { + .channels = hmc5883_channels, + .regval_to_samp_freq = hmc5883_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5883_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883_regval_to_nanoscale), + }, + [HMC5883L_ID] = { + .channels = hmc5883_channels, + .regval_to_samp_freq = hmc5883_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5883_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883l_regval_to_nanoscale), + }, + [HMC5983_ID] = { + .channels = hmc5983_channels, + .regval_to_samp_freq = hmc5983_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5983_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883l_regval_to_nanoscale), + } +}; + +static int hmc5843_init(struct hmc5843_data *data) +{ + int ret; + u8 id[3]; + + ret = regmap_bulk_read(data->regmap, HMC5843_ID_REG, + id, ARRAY_SIZE(id)); + if (ret < 0) + return ret; + if (id[0] != 'H' || id[1] != '4' || id[2] != '3') { + dev_err(data->dev, "no HMC5843/5883/5883L/5983 sensor\n"); + return -ENODEV; + } + + ret = hmc5843_set_meas_conf(data, HMC5843_MEAS_CONF_NORMAL); + if (ret < 0) + return ret; + ret = hmc5843_set_samp_freq(data, HMC5843_RATE_DEFAULT); + if (ret < 0) + return ret; + ret = hmc5843_set_range_gain(data, HMC5843_RANGE_GAIN_DEFAULT); + if (ret < 0) + return ret; + return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS); +} + +static const struct iio_info hmc5843_info = { + .attrs = &hmc5843_group, + .read_raw = &hmc5843_read_raw, + .write_raw = &hmc5843_write_raw, + .write_raw_get_fmt = &hmc5843_write_raw_get_fmt, + .driver_module = THIS_MODULE, +}; + +static const unsigned long hmc5843_scan_masks[] = {0x7, 0}; + +int hmc5843_common_suspend(struct device *dev) +{ + return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), + HMC5843_MODE_SLEEP); +} +EXPORT_SYMBOL(hmc5843_common_suspend); + +int hmc5843_common_resume(struct device *dev) +{ + return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), + HMC5843_MODE_CONVERSION_CONTINUOUS); +} +EXPORT_SYMBOL(hmc5843_common_resume); + +int hmc5843_common_probe(struct device *dev, struct regmap *regmap, + enum hmc5843_ids id, const char *name) +{ + struct hmc5843_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + dev_set_drvdata(dev, indio_dev); + + /* default settings at probe */ + data = iio_priv(indio_dev); + data->dev = dev; + data->regmap = regmap; + data->variant = &hmc5843_chip_info_tbl[id]; + mutex_init(&data->lock); + + indio_dev->dev.parent = dev; + indio_dev->name = name; + indio_dev->info = &hmc5843_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = data->variant->channels; + indio_dev->num_channels = 4; + indio_dev->available_scan_masks = hmc5843_scan_masks; + + ret = hmc5843_init(data); + if (ret < 0) + return ret; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + hmc5843_trigger_handler, NULL); + if (ret < 0) + goto buffer_setup_err; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + + return 0; + +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +buffer_setup_err: + hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP); + return ret; +} +EXPORT_SYMBOL(hmc5843_common_probe); + +int hmc5843_common_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + /* sleep mode to save power */ + hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP); + + return 0; +} +EXPORT_SYMBOL(hmc5843_common_remove); + +MODULE_AUTHOR("Shubhrajyoti Datta "); +MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 core driver"); +MODULE_LICENSE("GPL"); diff --git b/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c new file mode 100644 index 0000000..3de7f44 --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_i2c.c @@ -0,0 +1,103 @@ +/* + * i2c driver for hmc5843/5843/5883/5883l/5983 + * + * Split from hmc5843.c + * Copyright (C) Josef Gajdusek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include "hmc5843.h" + +static const struct regmap_range hmc5843_readable_ranges[] = { + regmap_reg_range(0, HMC5843_ID_END), +}; + +static const struct regmap_access_table hmc5843_readable_table = { + .yes_ranges = hmc5843_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), +}; + +static const struct regmap_range hmc5843_writable_ranges[] = { + regmap_reg_range(0, HMC5843_MODE_REG), +}; + +static const struct regmap_access_table hmc5843_writable_table = { + .yes_ranges = hmc5843_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), +}; + +static const struct regmap_range hmc5843_volatile_ranges[] = { + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), +}; + +static const struct regmap_access_table hmc5843_volatile_table = { + .yes_ranges = hmc5843_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), +}; + +static const struct regmap_config hmc5843_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .rd_table = &hmc5843_readable_table, + .wr_table = &hmc5843_writable_table, + .volatile_table = &hmc5843_volatile_table, + + .cache_type = REGCACHE_RBTREE, +}; + +static int hmc5843_i2c_probe(struct i2c_client *cli, + const struct i2c_device_id *id) +{ + return hmc5843_common_probe(&cli->dev, + devm_regmap_init_i2c(cli, &hmc5843_i2c_regmap_config), + id->driver_data, id->name); +} + +static int hmc5843_i2c_remove(struct i2c_client *client) +{ + return hmc5843_common_remove(&client->dev); +} + +static const struct i2c_device_id hmc5843_id[] = { + { "hmc5843", HMC5843_ID }, + { "hmc5883", HMC5883_ID }, + { "hmc5883l", HMC5883L_ID }, + { "hmc5983", HMC5983_ID }, + { } +}; +MODULE_DEVICE_TABLE(i2c, hmc5843_id); + +static const struct of_device_id hmc5843_of_match[] = { + { .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID }, + { .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID }, + { .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID }, + { .compatible = "honeywell,hmc5983", .data = (void *)HMC5983_ID }, + {} +}; +MODULE_DEVICE_TABLE(of, hmc5843_of_match); + +static struct i2c_driver hmc5843_driver = { + .driver = { + .name = "hmc5843", + .pm = HMC5843_PM_OPS, + .of_match_table = hmc5843_of_match, + }, + .id_table = hmc5843_id, + .probe = hmc5843_i2c_probe, + .remove = hmc5843_i2c_remove, +}; +module_i2c_driver(hmc5843_driver); + +MODULE_AUTHOR("Josef Gajdusek "); +MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 i2c driver"); +MODULE_LICENSE("GPL"); diff --git b/drivers/iio/magnetometer/hmc5843_spi.c b/drivers/iio/magnetometer/hmc5843_spi.c new file mode 100644 index 0000000..535f03a --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_spi.c @@ -0,0 +1,100 @@ +/* + * SPI driver for hmc5983 + * + * Copyright (C) Josef Gajdusek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include "hmc5843.h" + +static const struct regmap_range hmc5843_readable_ranges[] = { + regmap_reg_range(0, HMC5843_ID_END), +}; + +static const struct regmap_access_table hmc5843_readable_table = { + .yes_ranges = hmc5843_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), +}; + +static const struct regmap_range hmc5843_writable_ranges[] = { + regmap_reg_range(0, HMC5843_MODE_REG), +}; + +static const struct regmap_access_table hmc5843_writable_table = { + .yes_ranges = hmc5843_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), +}; + +static const struct regmap_range hmc5843_volatile_ranges[] = { + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), +}; + +static const struct regmap_access_table hmc5843_volatile_table = { + .yes_ranges = hmc5843_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), +}; + +static const struct regmap_config hmc5843_spi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .rd_table = &hmc5843_readable_table, + .wr_table = &hmc5843_writable_table, + .volatile_table = &hmc5843_volatile_table, + + /* Autoincrement address pointer */ + .read_flag_mask = 0xc0, + + .cache_type = REGCACHE_RBTREE, +}; + +static int hmc5843_spi_probe(struct spi_device *spi) +{ + int ret; + const struct spi_device_id *id = spi_get_device_id(spi); + + spi->mode = SPI_MODE_3; + spi->max_speed_hz = 8000000; + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret) + return ret; + + return hmc5843_common_probe(&spi->dev, + devm_regmap_init_spi(spi, &hmc5843_spi_regmap_config), + id->driver_data, id->name); +} + +static int hmc5843_spi_remove(struct spi_device *spi) +{ + return hmc5843_common_remove(&spi->dev); +} + +static const struct spi_device_id hmc5843_id[] = { + { "hmc5983", HMC5983_ID }, + { } +}; +MODULE_DEVICE_TABLE(spi, hmc5843_id); + +static struct spi_driver hmc5843_driver = { + .driver = { + .name = "hmc5843", + .pm = HMC5843_PM_OPS, + }, + .id_table = hmc5843_id, + .probe = hmc5843_spi_probe, + .remove = hmc5843_spi_remove, +}; + +module_spi_driver(hmc5843_driver); + +MODULE_AUTHOR("Josef Gajdusek "); +MODULE_DESCRIPTION("HMC5983 SPI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index b27f014..501f858 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -175,6 +175,8 @@ #define ST_MAGN_3_BDU_MASK 0x10 #define ST_MAGN_3_DRDY_IRQ_ADDR 0x62 #define ST_MAGN_3_DRDY_INT_MASK 0x01 +#define ST_MAGN_3_IHL_IRQ_ADDR 0x63 +#define ST_MAGN_3_IHL_IRQ_MASK 0x04 #define ST_MAGN_3_FS_AVL_15000_GAIN 1500 #define ST_MAGN_3_MULTIREAD_BIT false #define ST_MAGN_3_OUT_X_L_ADDR 0x68 @@ -480,6 +482,8 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .drdy_irq = { .addr = ST_MAGN_3_DRDY_IRQ_ADDR, .mask_int1 = ST_MAGN_3_DRDY_INT_MASK, + .addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR, + .mask_ihl = ST_MAGN_3_IHL_IRQ_MASK, }, .multi_read_bit = ST_MAGN_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig index fd75db7..ffc735c 100644 --- a/drivers/iio/potentiometer/Kconfig +++ b/drivers/iio/potentiometer/Kconfig @@ -17,4 +17,16 @@ config MCP4531 To compile this driver as a module, choose M here: the module will be called mcp4531. +config TPL0102 + tristate "Texas Instruments digital potentiometer driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for the Texas Instruments + TPL0102, TPL0402 + digital potentiometer chips. + + To compile this driver as a module, choose M here: the + module will be called tpl0102. + endmenu diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile index 8afe492..b563b49 100644 --- a/drivers/iio/potentiometer/Makefile +++ b/drivers/iio/potentiometer/Makefile @@ -4,3 +4,4 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_MCP4531) += mcp4531.o +obj-$(CONFIG_TPL0102) += tpl0102.o diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c index a3f6687..0db67fe 100644 --- a/drivers/iio/potentiometer/mcp4531.c +++ b/drivers/iio/potentiometer/mcp4531.c @@ -159,7 +159,7 @@ static int mcp4531_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) { dev_err(dev, "SMBUS Word Data not supported\n"); - return -EIO; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); diff --git b/drivers/iio/potentiometer/tpl0102.c b/drivers/iio/potentiometer/tpl0102.c new file mode 100644 index 0000000..313124b --- /dev/null +++ b/drivers/iio/potentiometer/tpl0102.c @@ -0,0 +1,166 @@ +/* + * tpl0102.c - Support for Texas Instruments digital potentiometers + * + * Copyright (C) 2016 Matt Ranostay + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * TODO: enable/disable hi-z output control + */ + +#include +#include +#include +#include + +struct tpl0102_cfg { + int wipers; + int max_pos; + int kohms; +}; + +enum tpl0102_type { + CAT5140_503, + CAT5140_104, + TPL0102_104, + TPL0401_103, +}; + +static const struct tpl0102_cfg tpl0102_cfg[] = { + /* on-semiconductor parts */ + [CAT5140_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, }, + [CAT5140_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, }, + /* ti parts */ + [TPL0102_104] = { .wipers = 2, .max_pos = 256, .kohms = 100 }, + [TPL0401_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, }, +}; + +struct tpl0102_data { + struct regmap *regmap; + unsigned long devid; +}; + +static const struct regmap_config tpl0102_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +#define TPL0102_CHANNEL(ch) { \ + .type = IIO_RESISTANCE, \ + .indexed = 1, \ + .output = 1, \ + .channel = (ch), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec tpl0102_channels[] = { + TPL0102_CHANNEL(0), + TPL0102_CHANNEL(1), +}; + +static int tpl0102_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct tpl0102_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + int ret = regmap_read(data->regmap, chan->channel, val); + + return ret ? ret : IIO_VAL_INT; + } + case IIO_CHAN_INFO_SCALE: + *val = 1000 * tpl0102_cfg[data->devid].kohms; + *val2 = tpl0102_cfg[data->devid].max_pos; + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int tpl0102_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct tpl0102_data *data = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if (val >= tpl0102_cfg[data->devid].max_pos || val < 0) + return -EINVAL; + + return regmap_write(data->regmap, chan->channel, val); +} + +static const struct iio_info tpl0102_info = { + .read_raw = tpl0102_read_raw, + .write_raw = tpl0102_write_raw, + .driver_module = THIS_MODULE, +}; + +static int tpl0102_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct tpl0102_data *data; + struct iio_dev *indio_dev; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENOTSUPP; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + + data->devid = id->driver_data; + data->regmap = devm_regmap_init_i2c(client, &tpl0102_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(dev, "regmap initialization failed\n"); + return PTR_ERR(data->regmap); + } + + indio_dev->dev.parent = dev; + indio_dev->info = &tpl0102_info; + indio_dev->channels = tpl0102_channels; + indio_dev->num_channels = tpl0102_cfg[data->devid].wipers; + indio_dev->name = client->name; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct i2c_device_id tpl0102_id[] = { + { "cat5140-503", CAT5140_503 }, + { "cat5140-104", CAT5140_104 }, + { "tpl0102-104", TPL0102_104 }, + { "tpl0401-103", TPL0401_103 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, tpl0102_id); + +static struct i2c_driver tpl0102_driver = { + .driver = { + .name = "tpl0102", + }, + .probe = tpl0102_probe, + .id_table = tpl0102_id, +}; + +module_i2c_driver(tpl0102_driver); + +MODULE_AUTHOR("Matt Ranostay "); +MODULE_DESCRIPTION("TPL0102 digital potentiometer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 6f2e7c9..31c0e1f 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -10,11 +10,11 @@ config BMP280 depends on I2C select REGMAP_I2C help - Say yes here to build support for Bosch Sensortec BMP280 - pressure and temperature sensor. + Say yes here to build support for Bosch Sensortec BMP280 + pressure and temperature sensor. - To compile this driver as a module, choose M here: the module - will be called bmp280. + To compile this driver as a module, choose M here: the module + will be called bmp280. config HID_SENSOR_PRESS depends on HID_SENSOR_HUB @@ -27,18 +27,33 @@ config HID_SENSOR_PRESS Say yes here to build support for the HID SENSOR Pressure driver - To compile this driver as a module, choose M here: the module - will be called hid-sensor-press. + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. config MPL115 + tristate + +config MPL115_I2C tristate "Freescale MPL115A2 pressure sensor driver" depends on I2C + select MPL115 help Say yes here to build support for the Freescale MPL115A2 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called mpl115. + To compile this driver as a module, choose M here: the module + will be called mpl115_i2c. + +config MPL115_SPI + tristate "Freescale MPL115A1 pressure sensor driver" + depends on SPI_MASTER + select MPL115 + help + Say yes here to build support for the Freescale MPL115A1 + pressure sensor connected via SPI. + + To compile this driver as a module, choose M here: the module + will be called mpl115_spi. config MPL3115 tristate "Freescale MPL3115A2 pressure sensor driver" @@ -49,11 +64,13 @@ config MPL3115 Say yes here to build support for the Freescale MPL3115A2 pressure sensor / altimeter. - To compile this driver as a module, choose M here: the module - will be called mpl3115. + To compile this driver as a module, choose M here: the module + will be called mpl3115. config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Measurement Specialties MS5611, MS5607 pressure and temperature sensors. @@ -82,7 +99,7 @@ config MS5611_SPI config MS5637 tristate "Measurement Specialties MS5637 pressure & temperature sensor" depends on I2C - select IIO_MS_SENSORS_I2C + select IIO_MS_SENSORS_I2C help If you say yes here you get support for the Measurement Specialties MS5637 pressure and temperature sensor. @@ -128,7 +145,7 @@ config T5403 Say yes here to build support for the EPCOS T5403 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called t5403. + To compile this driver as a module, choose M here: the module + will be called t5403. endmenu diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 46571c9..d336af1 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -6,6 +6,8 @@ obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_MPL115) += mpl115.o +obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o +obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_MS5611) += ms5611_core.o obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c index a0d7dee..73f2f0c 100644 --- a/drivers/iio/pressure/mpl115.c +++ b/drivers/iio/pressure/mpl115.c @@ -1,5 +1,5 @@ /* - * mpl115.c - Support for Freescale MPL115A2 pressure/temperature sensor + * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor * * Copyright (c) 2014 Peter Meerwald * @@ -7,17 +7,16 @@ * the GNU General Public License. See the file COPYING in the main * directory of this archive for more details. * - * (7-bit I2C slave address 0x60) - * * TODO: shutdown pin * */ #include -#include #include #include +#include "mpl115.h" + #define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */ #define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */ #define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */ @@ -27,16 +26,18 @@ #define MPL115_CONVERT 0x12 /* convert temperature and pressure */ struct mpl115_data { - struct i2c_client *client; + struct device *dev; struct mutex lock; s16 a0; s16 b1, b2; s16 c12; + const struct mpl115_ops *ops; }; static int mpl115_request(struct mpl115_data *data) { - int ret = i2c_smbus_write_byte_data(data->client, MPL115_CONVERT, 0); + int ret = data->ops->write(data->dev, MPL115_CONVERT, 0); + if (ret < 0) return ret; @@ -57,12 +58,12 @@ static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2) if (ret < 0) goto done; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_PADC); + ret = data->ops->read(data->dev, MPL115_PADC); if (ret < 0) goto done; padc = ret >> 6; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC); + ret = data->ops->read(data->dev, MPL115_TADC); if (ret < 0) goto done; tadc = ret >> 6; @@ -90,7 +91,7 @@ static int mpl115_read_temp(struct mpl115_data *data) ret = mpl115_request(data); if (ret < 0) goto done; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC); + ret = data->ops->read(data->dev, MPL115_TADC); done: mutex_unlock(&data->lock); return ret; @@ -145,66 +146,53 @@ static const struct iio_info mpl115_info = { .driver_module = THIS_MODULE, }; -static int mpl115_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops) { struct mpl115_data *data; struct iio_dev *indio_dev; int ret; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); - data->client = client; + data->dev = dev; + data->ops = ops; mutex_init(&data->lock); - i2c_set_clientdata(client, indio_dev); indio_dev->info = &mpl115_info; - indio_dev->name = id->name; - indio_dev->dev.parent = &client->dev; + indio_dev->name = name; + indio_dev->dev.parent = dev; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = mpl115_channels; indio_dev->num_channels = ARRAY_SIZE(mpl115_channels); - ret = i2c_smbus_read_word_swapped(data->client, MPL115_A0); + ret = data->ops->init(data->dev); + if (ret) + return ret; + + ret = data->ops->read(data->dev, MPL115_A0); if (ret < 0) return ret; data->a0 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_B1); + ret = data->ops->read(data->dev, MPL115_B1); if (ret < 0) return ret; data->b1 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_B2); + ret = data->ops->read(data->dev, MPL115_B2); if (ret < 0) return ret; data->b2 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_C12); + ret = data->ops->read(data->dev, MPL115_C12); if (ret < 0) return ret; data->c12 = ret; - return devm_iio_device_register(&client->dev, indio_dev); + return devm_iio_device_register(dev, indio_dev); } - -static const struct i2c_device_id mpl115_id[] = { - { "mpl115", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mpl115_id); - -static struct i2c_driver mpl115_driver = { - .driver = { - .name = "mpl115", - }, - .probe = mpl115_probe, - .id_table = mpl115_id, -}; -module_i2c_driver(mpl115_driver); +EXPORT_SYMBOL_GPL(mpl115_probe); MODULE_AUTHOR("Peter Meerwald "); MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver"); diff --git b/drivers/iio/pressure/mpl115.h b/drivers/iio/pressure/mpl115.h new file mode 100644 index 0000000..01b6527 --- /dev/null +++ b/drivers/iio/pressure/mpl115.h @@ -0,0 +1,24 @@ +/* + * Freescale MPL115A pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald + * Copyright (c) 2016 Akinobu Mita + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ + +#ifndef _MPL115_H_ +#define _MPL115_H_ + +struct mpl115_ops { + int (*init)(struct device *); + int (*read)(struct device *, u8); + int (*write)(struct device *, u8, u8); +}; + +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops); + +#endif diff --git b/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c new file mode 100644 index 0000000..1a29be4 --- /dev/null +++ b/drivers/iio/pressure/mpl115_i2c.c @@ -0,0 +1,67 @@ +/* + * Freescale MPL115A2 pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * (7-bit I2C slave address 0x60) + * + * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A2.pdf + */ + +#include +#include + +#include "mpl115.h" + +static int mpl115_i2c_init(struct device *dev) +{ + return 0; +} + +static int mpl115_i2c_read(struct device *dev, u8 address) +{ + return i2c_smbus_read_word_swapped(to_i2c_client(dev), address); +} + +static int mpl115_i2c_write(struct device *dev, u8 address, u8 value) +{ + return i2c_smbus_write_byte_data(to_i2c_client(dev), address, value); +} + +static const struct mpl115_ops mpl115_i2c_ops = { + .init = mpl115_i2c_init, + .read = mpl115_i2c_read, + .write = mpl115_i2c_write, +}; + +static int mpl115_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops); +} + +static const struct i2c_device_id mpl115_i2c_id[] = { + { "mpl115", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpl115_i2c_id); + +static struct i2c_driver mpl115_i2c_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_i2c_probe, + .id_table = mpl115_i2c_id, +}; +module_i2c_driver(mpl115_i2c_driver); + +MODULE_AUTHOR("Peter Meerwald "); +MODULE_DESCRIPTION("Freescale MPL115A2 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git b/drivers/iio/pressure/mpl115_spi.c b/drivers/iio/pressure/mpl115_spi.c new file mode 100644 index 0000000..9ebf55f --- /dev/null +++ b/drivers/iio/pressure/mpl115_spi.c @@ -0,0 +1,106 @@ +/* + * Freescale MPL115A1 pressure/temperature sensor + * + * Copyright (c) 2016 Akinobu Mita + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A1.pdf + */ + +#include +#include + +#include "mpl115.h" + +#define MPL115_SPI_WRITE(address) ((address) << 1) +#define MPL115_SPI_READ(address) (0x80 | (address) << 1) + +struct mpl115_spi_buf { + u8 tx[4]; + u8 rx[4]; +}; + +static int mpl115_spi_init(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf; + + buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_set_drvdata(spi, buf); + + return 0; +} + +static int mpl115_spi_read(struct device *dev, u8 address) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer = { + .tx_buf = buf->tx, + .rx_buf = buf->rx, + .len = 4, + }; + int ret; + + buf->tx[0] = MPL115_SPI_READ(address); + buf->tx[2] = MPL115_SPI_READ(address + 1); + + ret = spi_sync_transfer(spi, &xfer, 1); + if (ret) + return ret; + + return (buf->rx[1] << 8) | buf->rx[3]; +} + +static int mpl115_spi_write(struct device *dev, u8 address, u8 value) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer = { + .tx_buf = buf->tx, + .len = 2, + }; + + buf->tx[0] = MPL115_SPI_WRITE(address); + buf->tx[1] = value; + + return spi_sync_transfer(spi, &xfer, 1); +} + +static const struct mpl115_ops mpl115_spi_ops = { + .init = mpl115_spi_init, + .read = mpl115_spi_read, + .write = mpl115_spi_write, +}; + +static int mpl115_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return mpl115_probe(&spi->dev, id->name, &mpl115_spi_ops); +} + +static const struct spi_device_id mpl115_spi_ids[] = { + { "mpl115", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, mpl115_spi_ids); + +static struct spi_driver mpl115_spi_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_spi_probe, + .id_table = mpl115_spi_ids, +}; +module_spi_driver(mpl115_spi_driver); + +MODULE_AUTHOR("Akinobu Mita "); +MODULE_DESCRIPTION("Freescale MPL115A1 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h index 23b93c7..8b08e4b 100644 --- a/drivers/iio/pressure/ms5611.h +++ b/drivers/iio/pressure/ms5611.h @@ -51,6 +51,8 @@ struct ms5611_state { struct ms5611_chip_info *chip_info; }; -int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type); +int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, + const char* name, int type); +int ms5611_remove(struct iio_dev *indio_dev); #endif /* _MS5611_H */ diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c index 2f3d9b4..992ad8d 100644 --- a/drivers/iio/pressure/ms5611_core.c +++ b/drivers/iio/pressure/ms5611_core.c @@ -16,7 +16,11 @@ #include #include #include +#include +#include +#include +#include #include "ms5611.h" static bool ms5611_prom_is_valid(u16 *prom, size_t len) @@ -133,17 +137,17 @@ static int ms5607_temp_and_pressure_compensate(struct ms5611_chip_info *chip_inf t = 2000 + ((chip_info->prom[6] * dt) >> 23); if (t < 2000) { - s64 off2, sens2, t2; + s64 off2, sens2, t2, tmp; t2 = (dt * dt) >> 31; - off2 = (61 * (t - 2000) * (t - 2000)) >> 4; - sens2 = off2 << 1; + tmp = (t - 2000) * (t - 2000); + off2 = (61 * tmp) >> 4; + sens2 = tmp << 1; if (t < -1500) { - s64 tmp = (t + 1500) * (t + 1500); - + tmp = (t + 1500) * (t + 1500); off2 += 15 * tmp; - sens2 += (8 * tmp); + sens2 += 8 * tmp; } t -= t2; @@ -173,6 +177,28 @@ static int ms5611_reset(struct iio_dev *indio_dev) return 0; } +static irqreturn_t ms5611_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ms5611_state *st = iio_priv(indio_dev); + s32 buf[4]; /* s32 (pressure) + s32 (temp) + 2 * s32 (timestamp) */ + int ret; + + mutex_lock(&st->lock); + ret = ms5611_read_temp_and_pressure(indio_dev, &buf[1], &buf[0]); + mutex_unlock(&st->lock); + if (ret < 0) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + static int ms5611_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) @@ -201,11 +227,25 @@ static int ms5611_read_raw(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 10; + return IIO_VAL_INT; + case IIO_PRESSURE: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } } return -EINVAL; } +static const unsigned long ms5611_scan_masks[] = {0x3, 0}; + static struct ms5611_chip_info chip_info_tbl[] = { [MS5611] = { .temp_and_pressure_compensate = ms5611_temp_and_pressure_compensate, @@ -218,12 +258,29 @@ static struct ms5611_chip_info chip_info_tbl[] = { static const struct iio_chan_spec ms5611_channels[] = { { .type = IIO_PRESSURE, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, }, { .type = IIO_TEMP, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - } + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), }; static const struct iio_info ms5611_info = { @@ -234,6 +291,18 @@ static const struct iio_info ms5611_info = { static int ms5611_init(struct iio_dev *indio_dev) { int ret; + struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent, + "vdd"); + + /* Enable attached regulator if any. */ + if (!IS_ERR(vdd)) { + ret = regulator_enable(vdd); + if (ret) { + dev_err(indio_dev->dev.parent, + "failed to enable Vdd supply: %d\n", ret); + return ret; + } + } ret = ms5611_reset(indio_dev); if (ret < 0) @@ -242,7 +311,8 @@ static int ms5611_init(struct iio_dev *indio_dev) return ms5611_read_prom(indio_dev); } -int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type) +int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, + const char *name, int type) { int ret; struct ms5611_state *st = iio_priv(indio_dev); @@ -250,20 +320,48 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type) mutex_init(&st->lock); st->chip_info = &chip_info_tbl[type]; indio_dev->dev.parent = dev; - indio_dev->name = dev->driver->name; + indio_dev->name = name; indio_dev->info = &ms5611_info; indio_dev->channels = ms5611_channels; indio_dev->num_channels = ARRAY_SIZE(ms5611_channels); indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = ms5611_scan_masks; ret = ms5611_init(indio_dev); if (ret < 0) return ret; - return devm_iio_device_register(dev, indio_dev); + ret = iio_triggered_buffer_setup(indio_dev, NULL, + ms5611_trigger_handler, NULL); + if (ret < 0) { + dev_err(dev, "iio triggered buffer setup failed\n"); + return ret; + } + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(dev, "unable to register iio device\n"); + goto err_buffer_cleanup; + } + + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + + return ret; } EXPORT_SYMBOL(ms5611_probe); +int ms5611_remove(struct iio_dev *indio_dev) +{ + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + return 0; +} +EXPORT_SYMBOL(ms5611_remove); + MODULE_AUTHOR("Tomasz Duszynski "); MODULE_DESCRIPTION("MS5611 core driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c index 245797d..7f6fc8e 100644 --- a/drivers/iio/pressure/ms5611_i2c.c +++ b/drivers/iio/pressure/ms5611_i2c.c @@ -92,19 +92,25 @@ static int ms5611_i2c_probe(struct i2c_client *client, I2C_FUNC_SMBUS_WRITE_BYTE | I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_READ_I2C_BLOCK)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); if (!indio_dev) return -ENOMEM; st = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); st->reset = ms5611_i2c_reset; st->read_prom_word = ms5611_i2c_read_prom_word; st->read_adc_temp_and_pressure = ms5611_i2c_read_adc_temp_and_pressure; st->client = client; - return ms5611_probe(indio_dev, &client->dev, id->driver_data); + return ms5611_probe(indio_dev, &client->dev, id->name, id->driver_data); +} + +static int ms5611_i2c_remove(struct i2c_client *client) +{ + return ms5611_remove(i2c_get_clientdata(client)); } static const struct i2c_device_id ms5611_id[] = { @@ -120,6 +126,7 @@ static struct i2c_driver ms5611_driver = { }, .id_table = ms5611_id, .probe = ms5611_i2c_probe, + .remove = ms5611_i2c_remove, }; module_i2c_driver(ms5611_driver); diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c index aaa0c4b..5cc009e 100644 --- a/drivers/iio/pressure/ms5611_spi.c +++ b/drivers/iio/pressure/ms5611_spi.c @@ -90,6 +90,8 @@ static int ms5611_spi_probe(struct spi_device *spi) if (!indio_dev) return -ENOMEM; + spi_set_drvdata(spi, indio_dev); + spi->mode = SPI_MODE_0; spi->max_speed_hz = 20000000; spi->bits_per_word = 8; @@ -103,8 +105,13 @@ static int ms5611_spi_probe(struct spi_device *spi) st->read_adc_temp_and_pressure = ms5611_spi_read_adc_temp_and_pressure; st->client = spi; - return ms5611_probe(indio_dev, &spi->dev, - spi_get_device_id(spi)->driver_data); + return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name, + spi_get_device_id(spi)->driver_data); +} + +static int ms5611_spi_remove(struct spi_device *spi) +{ + return ms5611_remove(spi_get_drvdata(spi)); } static const struct spi_device_id ms5611_id[] = { @@ -120,6 +127,7 @@ static struct spi_driver ms5611_driver = { }, .id_table = ms5611_id, .probe = ms5611_spi_probe, + .remove = ms5611_spi_remove, }; module_spi_driver(ms5611_driver); diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c index e8d0e0d..e68052c 100644 --- a/drivers/iio/pressure/ms5637.c +++ b/drivers/iio/pressure/ms5637.c @@ -136,7 +136,7 @@ static int ms5637_probe(struct i2c_client *client, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { dev_err(&client->dev, "Adapter does not support some i2c transaction\n"); - return -ENODEV; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index b39a2fb..172393a 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -62,6 +62,8 @@ #define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20 +#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22 +#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80 #define ST_PRESS_LPS331AP_MULTIREAD_BIT true #define ST_PRESS_LPS331AP_TEMP_OFFSET 42500 @@ -100,6 +102,8 @@ #define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23 #define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01 #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10 +#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22 +#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80 #define ST_PRESS_LPS25H_MULTIREAD_BIT true #define ST_PRESS_LPS25H_TEMP_OFFSET 42500 #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 @@ -220,6 +224,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR, .mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR, + .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK, }, .multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT, .bootime = 2, @@ -304,6 +310,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR, .mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR, + .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK, }, .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/pressure/t5403.c b/drivers/iio/pressure/t5403.c index e11cd39..2667e71 100644 --- a/drivers/iio/pressure/t5403.c +++ b/drivers/iio/pressure/t5403.c @@ -221,7 +221,7 @@ static int t5403_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK)) - return -ENODEV; + return -EOPNOTSUPP; ret = i2c_smbus_read_byte_data(client, T5403_SLAVE_ADDR); if (ret < 0) diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c index db35e04..4f50238 100644 --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c @@ -278,7 +278,7 @@ static int lidar_probe(struct i2c_client *client, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) data->xfer = lidar_smbus_xfer; else - return -ENOTSUPP; + return -EOPNOTSUPP; indio_dev->info = &lidar_info; indio_dev->name = LIDAR_DRV_NAME; diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c index a570c2e..4b645fc 100644 --- a/drivers/iio/temperature/mlx90614.c +++ b/drivers/iio/temperature/mlx90614.c @@ -516,7 +516,7 @@ static int mlx90614_probe(struct i2c_client *client, int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c index e78c106..18c9b43 100644 --- a/drivers/iio/temperature/tmp006.c +++ b/drivers/iio/temperature/tmp006.c @@ -205,7 +205,7 @@ static int tmp006_probe(struct i2c_client *client, int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; if (!tmp006_check_identification(client)) { dev_err(&client->dev, "no TMP006 sensor\n"); diff --git a/drivers/iio/temperature/tsys01.c b/drivers/iio/temperature/tsys01.c index 05c1206..3e60c61 100644 --- a/drivers/iio/temperature/tsys01.c +++ b/drivers/iio/temperature/tsys01.c @@ -190,7 +190,7 @@ static int tsys01_i2c_probe(struct i2c_client *client, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { dev_err(&client->dev, "Adapter does not support some i2c transaction\n"); - return -ENODEV; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); diff --git a/drivers/iio/temperature/tsys02d.c b/drivers/iio/temperature/tsys02d.c index 4c1fbd5..ab6fe8f 100644 --- a/drivers/iio/temperature/tsys02d.c +++ b/drivers/iio/temperature/tsys02d.c @@ -137,7 +137,7 @@ static int tsys02d_probe(struct i2c_client *client, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { dev_err(&client->dev, "Adapter does not support some i2c transaction\n"); - return -ENODEV; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 23fbe38..657c7e9 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -86,8 +86,8 @@ struct edt_reg_addr { struct edt_ft5x06_ts_data { struct i2c_client *client; struct input_dev *input; - u16 num_x; - u16 num_y; + u32 num_x; + u32 num_y; struct gpio_desc *reset_gpio; struct gpio_desc *wake_gpio; @@ -110,6 +110,9 @@ struct edt_ft5x06_ts_data { struct edt_reg_addr reg_addr; enum edt_ver version; + bool invert_x; + bool invert_y; + bool swap_xy; }; struct edt_i2c_chip_data { @@ -246,8 +249,19 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) if (!down) continue; - input_report_abs(tsdata->input, ABS_MT_POSITION_X, x); - input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y); + if (tsdata->invert_x) + x = tsdata->num_x - x; + + if (tsdata->invert_y) + y = tsdata->num_y - y; + + if (tsdata->swap_xy) { + input_report_abs(tsdata->input, ABS_MT_POSITION_X, y); + input_report_abs(tsdata->input, ABS_MT_POSITION_Y, x); + } else { + input_report_abs(tsdata->input, ABS_MT_POSITION_X, x); + input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y); + } } input_mt_report_pointer_emulation(tsdata->input, true); @@ -724,8 +738,8 @@ edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata, if (!tsdata->debug_dir) return; - debugfs_create_u16("num_x", S_IRUSR, tsdata->debug_dir, &tsdata->num_x); - debugfs_create_u16("num_y", S_IRUSR, tsdata->debug_dir, &tsdata->num_y); + debugfs_create_u32("num_x", S_IRUSR, tsdata->debug_dir, &tsdata->num_x); + debugfs_create_u32("num_y", S_IRUSR, tsdata->debug_dir, &tsdata->num_y); debugfs_create_file("mode", S_IRUSR | S_IWUSR, tsdata->debug_dir, tsdata, &debugfs_mode_fops); @@ -838,6 +852,20 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev, edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, val); tsdata->offset = val; } + + if (device_property_read_u32(dev, "touchscreen-size-x", + &tsdata->num_x) || + device_property_read_u32(dev, "touchscreen-size-y", + &tsdata->num_x)) { + dev_err(dev, "touchscreen-size-x and/or -y missing\n"); + } + + tsdata->invert_x = device_property_read_bool(dev, + "touchscreen-inverted-x"); + tsdata->invert_y = device_property_read_bool(dev, + "touchscreen-inverted-y"); + tsdata->swap_xy = device_property_read_bool(dev, + "touchscreen-swapped-x-y"); } static void @@ -967,10 +995,17 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input->id.bustype = BUS_I2C; input->dev.parent = &client->dev; - input_set_abs_params(input, ABS_MT_POSITION_X, - 0, tsdata->num_x * 64 - 1, 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, - 0, tsdata->num_y * 64 - 1, 0, 0); + if (tsdata->swap_xy) { + input_set_abs_params(input, ABS_MT_POSITION_X, + 0, tsdata->num_y * 64 - 1, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + 0, tsdata->num_x * 64 - 1, 0, 0); + } else { + input_set_abs_params(input, ABS_MT_POSITION_X, + 0, tsdata->num_x * 64 - 1, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + 0, tsdata->num_y * 64 - 1, 0, 0); + } touchscreen_parse_properties(input, true); diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index d32b544..ca19130 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -24,8 +24,12 @@ #include #include #include +#include #include #include +#include +#include +#include #include #include @@ -162,6 +166,82 @@ static const struct of_device_id tps65217_of_match[] = { }; MODULE_DEVICE_TABLE(of, tps65217_of_match); +static irqreturn_t tps65217_irq(int irq, void *irq_data) +{ + struct tps65217 *tps = irq_data; + unsigned int int_reg = 0, status_reg = 0; + + tps65217_reg_read(tps, TPS65217_REG_INT, &int_reg); + tps65217_reg_read(tps, TPS65217_REG_STATUS, &status_reg); + if (status_reg) + dev_dbg(tps->dev, "status now: 0x%X\n", status_reg); + + if (!int_reg) + return IRQ_NONE; + + if (int_reg & TPS65217_INT_PBI) { + /* Handle push button */ + dev_dbg(tps->dev, "power button status change\n"); + input_report_key(tps->pwr_but, KEY_POWER, + status_reg & TPS65217_STATUS_PB); + input_sync(tps->pwr_but); + } + if (int_reg & TPS65217_INT_ACI) { + /* Handle AC power status change */ + dev_dbg(tps->dev, "AC power status change\n"); + /* Press KEY_POWER when AC not present */ + input_report_key(tps->pwr_but, KEY_POWER, + ~status_reg & TPS65217_STATUS_ACPWR); + input_sync(tps->pwr_but); + } + if (int_reg & TPS65217_INT_USBI) { + /* Handle USB power status change */ + dev_dbg(tps->dev, "USB power status change\n"); + } + + return IRQ_HANDLED; +} + +static int tps65217_probe_pwr_but(struct tps65217 *tps) +{ + int ret; + unsigned int int_reg; + + tps->pwr_but = devm_input_allocate_device(tps->dev); + if (!tps->pwr_but) { + dev_err(tps->dev, + "Failed to allocated pwr_but input device\n"); + return -ENOMEM; + } + + tps->pwr_but->evbit[0] = BIT_MASK(EV_KEY); + tps->pwr_but->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); + tps->pwr_but->name = "tps65217_pwr_but"; + ret = input_register_device(tps->pwr_but); + if (ret) { + /* NOTE: devm managed device */ + dev_err(tps->dev, "Failed to register button device\n"); + return ret; + } + ret = devm_request_threaded_irq(tps->dev, + tps->irq, NULL, tps65217_irq, IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "tps65217", tps); + if (ret != 0) { + dev_err(tps->dev, "Failed to request IRQ %d\n", tps->irq); + return ret; + } + + /* enable the power button interrupt */ + ret = tps65217_reg_read(tps, TPS65217_REG_INT, &int_reg); + if (ret < 0) { + dev_err(tps->dev, "Failed to read INT reg\n"); + return ret; + } + int_reg &= ~TPS65217_INT_PBM; + tps65217_reg_write(tps, TPS65217_REG_INT, int_reg, TPS65217_PROTECT_NONE); + return 0; +} + static int tps65217_probe(struct i2c_client *client, const struct i2c_device_id *ids) { @@ -169,10 +249,13 @@ static int tps65217_probe(struct i2c_client *client, unsigned int version; unsigned long chip_id = ids->driver_data; const struct of_device_id *match; + struct device_node *node; bool status_off = false; + int irq = -1, irq_gpio = -1; int ret; - if (client->dev.of_node) { + node = client->dev.of_node; + if (node) { match = of_match_device(tps65217_of_match, &client->dev); if (!match) { dev_err(&client->dev, @@ -180,8 +263,31 @@ static int tps65217_probe(struct i2c_client *client, return -EINVAL; } chip_id = (unsigned long)match->data; - status_off = of_property_read_bool(client->dev.of_node, + status_off = of_property_read_bool(node, "ti,pmic-shutdown-controller"); + + /* at first try to get irq via OF method */ + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) { + irq = -1; + irq_gpio = of_get_named_gpio(node, "irq-gpio", 0); + if (irq_gpio >= 0) { + /* valid gpio; convert to irq */ + ret = devm_gpio_request_one(&client->dev, + irq_gpio, GPIOF_DIR_IN, + "tps65217-gpio-irq"); + if (ret != 0) + dev_warn(&client->dev, "Failed to " + "request gpio #%d\n", irq_gpio); + irq = gpio_to_irq(irq_gpio); + if (irq <= 0) { + dev_warn(&client->dev, "Failed to " + "convert gpio #%d to irq\n", + irq_gpio); + irq = -1; + } + } + } } if (!chip_id) { @@ -205,6 +311,18 @@ static int tps65217_probe(struct i2c_client *client, return ret; } + tps->irq = irq; + tps->irq_gpio = irq_gpio; + + /* we got an irq, request it */ + if (tps->irq >= 0) { + ret = tps65217_probe_pwr_but(tps); + if (ret < 0) { + dev_err(tps->dev, "Failed to probe pwr_but\n"); + return ret; + } + } + ret = mfd_add_devices(tps->dev, -1, tps65217s, ARRAY_SIZE(tps65217s), NULL, 0, NULL); if (ret < 0) { diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 054fc10..8997680 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -526,6 +526,36 @@ config VEXPRESS_SYSCFG bus. System Configuration interface is one of the possible means of generating transactions on this bus. +config BONE_CAPEMGR + tristate "Beaglebone cape manager" + depends on ARCH_OMAP2PLUS && OF + select EEPROM + select OF_OVERLAY + help + Say Y here to include support for automatic loading of + beaglebone capes. Select M to build as a module which + will be named bone_capemgr. + +config DEV_OVERLAYMGR + tristate "Device overlay manager" + depends on OF + select OF_OVERLAY + default n + help + Say Y here to include support for the automagical dev + overlay manager. + +config TIEQEP + tristate "EQEP Hardware quadrature encoder controller" + depends on SOC_AM33XX + select PWM_TIPWMSS + help + Driver support for the EQEP quadrature encoder controller AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called tieqep. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" @@ -535,7 +565,9 @@ source "drivers/misc/altera-stapl/Kconfig" source "drivers/misc/mei/Kconfig" source "drivers/misc/vmw_vmci/Kconfig" source "drivers/misc/mic/Kconfig" +source "drivers/misc/cape_bone_argus/Kconfig" source "drivers/misc/genwqe/Kconfig" +source "drivers/misc/cape/Kconfig" source "drivers/misc/echo/Kconfig" source "drivers/misc/cxl/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 537d7f3..44d2a52 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -52,7 +52,12 @@ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o obj-$(CONFIG_SRAM) += sram.o obj-y += mic/ +obj-y += cape_bone_argus/ obj-$(CONFIG_GENWQE) += genwqe/ +obj-y += cape/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ +obj-$(CONFIG_TIEQEP) += tieqep.o +obj-$(CONFIG_BONE_CAPEMGR) += bone_capemgr.o +obj-$(CONFIG_DEV_OVERLAYMGR) += devovmgr.o diff --git b/drivers/misc/bone_capemgr.c b/drivers/misc/bone_capemgr.c new file mode 100644 index 0000000..094ea75 --- /dev/null +++ b/drivers/misc/bone_capemgr.c @@ -0,0 +1,1884 @@ +/* + * TI Beaglebone cape manager + * + * Copyright (C) 2012 Texas Instruments Inc. + * Copyright (C) 2012-2015 Konsulko Group. + * Author: Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* disabled capes */ +static char *disable_partno; +module_param(disable_partno, charp, 0444); +MODULE_PARM_DESC(disable_partno, + "Comma delimited list of PART-NUMBER[:REV] of disabled capes"); + +/* enable capes */ +static char *enable_partno; +module_param(enable_partno, charp, 0444); +MODULE_PARM_DESC(enable_partno, + "Comma delimited list of PART-NUMBER[:REV] of enabled capes"); + +/* delay to scan on boot until rootfs appears */ +static int boot_scan_period = 1000; +module_param(boot_scan_period, int, 0444); +MODULE_PARM_DESC(boot_scan_period, + "boot scan period until rootfs firmware is available"); + +struct capemgr_info; + +struct slot_ee_attribute { + struct device_attribute devattr; + unsigned int field; + struct bone_cape_slot *slot; /* this is filled when instantiated */ +}; +#define to_slot_ee_attribute(x) \ + container_of((x), struct slot_ee_attribute, devattr) + +struct bbrd_ee_attribute { + struct device_attribute devattr; + unsigned int field; +}; +#define to_bbrd_ee_attribute(x) \ + container_of((x), struct bbrd_ee_attribute, devattr) + +struct bone_cape_slot { + struct list_head node; + struct capemgr_info *info; + int slotno; + struct nvmem_cell *nvmem_cell; + + char text_id[256]; + char signature[256]; + /* quick access */ + char board_name[32+1]; + char version[4+1]; + char manufacturer[16+1]; + char part_number[16+1]; + + /* attribute group */ + char *ee_attr_name; + int ee_attrs_count; + struct slot_ee_attribute *ee_attrs; + struct attribute **ee_attrs_tab; + struct attribute_group attrgroup; + + /* state flags */ + unsigned int probed : 1; + unsigned int probe_failed : 1; + unsigned int override : 1; + unsigned int loading : 1; + unsigned int loaded : 1; + unsigned int retry_loading : 1; + unsigned int disabled : 1; + + char *dtbo; + const struct firmware *fw; + struct device_node *overlay; + int overlay_id; + + /* loader thread */ + struct task_struct *loader_thread; + + /* load priority */ + int priority; +}; + +struct bone_baseboard { + + /* from the matched boardmap node */ + char *compatible_name; + + /* filled in by reading the eeprom */ + char signature[256]; + char text_id[64+1]; + + /* quick access */ + char board_name[8+1]; + char revision[4+1]; + char serial_number[12+1]; + + /* access to the eeprom */ + struct nvmem_cell *nvmem_cell; +}; + +struct capemgr_info { + struct platform_device *pdev; + + atomic_t next_slot_nr; + struct list_head slot_list; + struct mutex slots_list_mutex; + + /* baseboard EEPROM data */ + struct bone_baseboard baseboard; + + /* wait queue for keeping the priorities straight */ + wait_queue_head_t load_wq; +}; + +static int bone_slot_fill_override(struct bone_cape_slot *slot, + const char *part_number, const char *version); +static struct bone_cape_slot *capemgr_add_slot( + struct capemgr_info *info, const char *slot_name, + const char *part_number, const char *version, int prio); +static int capemgr_remove_slot_no_lock(struct bone_cape_slot *slot); +static int capemgr_remove_slot(struct bone_cape_slot *slot); +static int capemgr_load_slot(struct bone_cape_slot *slot); +static int capemgr_unload_slot(struct bone_cape_slot *slot); + +/* baseboard EEPROM field definition */ +#define BBRD_EE_FIELD_HEADER 0 +#define BBRD_EE_FIELD_BOARD_NAME 1 +#define BBRD_EE_FIELD_REVISION 2 +#define BBRD_EE_FIELD_SERIAL_NUMBER 3 +#define BBRD_EE_FIELD_CONFIG_OPTION 4 +#define BBRD_EE_FILED_RSVD1 5 +#define BBRD_EE_FILED_RSVD2 6 +#define BBRD_EE_FILED_RSVD3 7 + +/* cape EEPROM field definitions */ +#define CAPE_EE_FIELD_HEADER 0 +#define CAPE_EE_FIELD_EEPROM_REV 1 +#define CAPE_EE_FIELD_BOARD_NAME 2 +#define CAPE_EE_FIELD_VERSION 3 +#define CAPE_EE_FIELD_MANUFACTURER 4 +#define CAPE_EE_FIELD_PART_NUMBER 5 +#define CAPE_EE_FIELD_NUMBER_OF_PINS 6 +#define CAPE_EE_FIELD_SERIAL_NUMBER 7 +#define CAPE_EE_FIELD_PIN_USAGE 8 +#define CAPE_EE_FIELD_VDD_3V3EXP 9 +#define CAPE_EE_FIELD_VDD_5V 10 +#define CAPE_EE_FIELD_SYS_5V 11 +#define CAPE_EE_FIELD_DC_SUPPLIED 12 +#define CAPE_EE_FIELD_FIELDS_NR 13 + +#define EE_FIELD_MAKE_HEADER(p) \ + ({ \ + const u8 *_p = (p); \ + (((u32)_p[0] << 24) | ((u32)_p[1] << 16) | \ + ((u32)_p[2] << 8) | (u32)_p[3]); \ + }) + +#define EE_FIELD_HEADER_VALID 0xaa5533ee + +struct ee_field { + const char *name; + int start; + int size; + unsigned int ascii : 1; + unsigned int strip_trailing_dots : 1; + const char *override; +}; + +/* baseboard EEPROM definitions */ +static const struct ee_field bbrd_sig_fields[] = { + [BBRD_EE_FIELD_HEADER] = { + .name = "header", + .start = 0, + .size = 4, + .ascii = 0, + .override = "\xaa\x55\x33\xee", /* AA 55 33 EE */ + }, + [BBRD_EE_FIELD_BOARD_NAME] = { + .name = "board-name", + .start = 4, + .size = 8, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Board Name", + }, + [BBRD_EE_FIELD_REVISION] = { + .name = "revision", + .start = 12, + .size = 4, + .ascii = 1, + .override = "00A0", + }, + [BBRD_EE_FIELD_SERIAL_NUMBER] = { + .name = "serial-number", + .start = 16, + .size = 12, + .ascii = 1, + .override = "0000000000", + }, + [BBRD_EE_FIELD_CONFIG_OPTION] = { + .name = "config-option", + .start = 28, + .size = 32, + }, +}; + +/* cape EEPROM definitions */ +static const struct ee_field cape_sig_fields[] = { + [CAPE_EE_FIELD_HEADER] = { + .name = "header", + .start = 0, + .size = 4, + .ascii = 0, + .override = "\xaa\x55\x33\xee", /* AA 55 33 EE */ + }, + [CAPE_EE_FIELD_EEPROM_REV] = { + .name = "eeprom-format-revision", + .start = 4, + .size = 2, + .ascii = 1, + .override = "A0", + }, + [CAPE_EE_FIELD_BOARD_NAME] = { + .name = "board-name", + .start = 6, + .size = 32, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Board Name", + }, + [CAPE_EE_FIELD_VERSION] = { + .name = "version", + .start = 38, + .size = 4, + .ascii = 1, + .override = "00A0", + }, + [CAPE_EE_FIELD_MANUFACTURER] = { + .name = "manufacturer", + .start = 42, + .size = 16, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Manuf", + }, + [CAPE_EE_FIELD_PART_NUMBER] = { + .name = "part-number", + .start = 58, + .size = 16, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Part#", + }, + [CAPE_EE_FIELD_NUMBER_OF_PINS] = { + .name = "number-of-pins", + .start = 74, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_SERIAL_NUMBER] = { + .name = "serial-number", + .start = 76, + .size = 12, + .ascii = 1, + .override = "0000000000", + }, + [CAPE_EE_FIELD_PIN_USAGE] = { + .name = "pin-usage", + .start = 88, + .size = 140, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_VDD_3V3EXP] = { + .name = "vdd-3v3exp", + .start = 228, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_VDD_5V] = { + .name = "vdd-5v", + .start = 230, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_SYS_5V] = { + .name = "sys-5v", + .start = 232, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_DC_SUPPLIED] = { + .name = "dc-supplied", + .start = 234, + .size = 2, + .ascii = 0, + .override = NULL, + }, +}; + +static char *ee_field_get(const struct ee_field *sig_field, + const void *data, int field, char *buf, int bufsz) +{ + int len; + + /* enough space? */ + if (bufsz < sig_field->size + sig_field->ascii) + return NULL; + + memcpy(buf, (char *)data + sig_field->start, sig_field->size); + + /* terminate ascii field */ + if (sig_field->ascii) + buf[sig_field->size] = '\0'; + + if (sig_field->strip_trailing_dots) { + len = strlen(buf); + while (len > 1 && buf[len - 1] == '.') + buf[--len] = '\0'; + } + + return buf; +} + +char *bbrd_ee_field_get(const void *data, + int field, char *buf, int bufsz) +{ + if ((unsigned int)field >= ARRAY_SIZE(bbrd_sig_fields)) + return NULL; + + return ee_field_get(&bbrd_sig_fields[field], data, field, buf, bufsz); +} + +char *cape_ee_field_get(const void *data, + int field, char *buf, int bufsz) +{ + if ((unsigned int)field >= ARRAY_SIZE(cape_sig_fields)) + return NULL; + + return ee_field_get(&cape_sig_fields[field], data, field, buf, bufsz); +} + +#ifdef CONFIG_OF +static const struct of_device_id capemgr_of_match[] = { + { + .compatible = "ti,bone-capemgr", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, capemgr_of_match); + +#endif + +static int bone_baseboard_scan(struct bone_baseboard *bbrd) +{ + struct capemgr_info *info = container_of(bbrd, + struct capemgr_info, baseboard); + const u8 *p; + int ret; + size_t len; + + p = nvmem_cell_read(bbrd->nvmem_cell, &len); + if (IS_ERR(p)) { + ret = PTR_ERR(p); + dev_err(&info->pdev->dev, + "Cannot read cell (ret=%d)\n", ret); + return ret; + } + if (len < sizeof(bbrd->signature)) { + dev_info(&info->pdev->dev, + "Short read %d (should be >= %d bytes)\n", + len, sizeof(bbrd->signature)); + return -EINVAL; + } + memcpy(bbrd->signature, p, sizeof(bbrd->signature)); + + p = bbrd->signature; + if (EE_FIELD_MAKE_HEADER(p) != EE_FIELD_HEADER_VALID) { + dev_err(&info->pdev->dev, "Invalid board signature '%08x'\n", + EE_FIELD_MAKE_HEADER(p)); + return -ENODEV; + } + + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_BOARD_NAME, + bbrd->board_name, sizeof(bbrd->board_name)); + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_REVISION, + bbrd->revision, sizeof(bbrd->revision)); + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_SERIAL_NUMBER, + bbrd->serial_number, sizeof(bbrd->serial_number)); + + /* board_name,version,manufacturer,part_number */ + snprintf(bbrd->text_id, sizeof(bbrd->text_id) - 1, + "%s,%s,%s", bbrd->board_name, bbrd->revision, + bbrd->serial_number); + + /* terminate always */ + bbrd->text_id[sizeof(bbrd->text_id) - 1] = '\0'; + + return 0; +} + +static int bone_slot_scan(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + const u8 *p; + int r; + ssize_t len; + + /* need to read EEPROM? */ + if (slot->probed) + goto slot_fail_check; + + slot->probed = 1; + + if (!slot->override) { + + p = nvmem_cell_read(slot->nvmem_cell, &len); + if (IS_ERR(p)) { + r = PTR_ERR(p); + slot->probe_failed = 1; + + /* timeout is normal when no cape is present */ + if (r != -ETIMEDOUT) + dev_err(&info->pdev->dev, + "Cannot read cell (ret=%d)\n", r); + return r; + } + if (len < sizeof(slot->signature)) { + dev_info(&info->pdev->dev, + "Short read %d (should be >= %d bytes)\n", + len, sizeof(slot->signature)); + return -EINVAL; + } + memcpy(slot->signature, p, sizeof(slot->signature)); + + } else + dev_info(&info->pdev->dev, + "Using override eeprom data at slot %d\n", + slot->slotno); + + p = slot->signature; + if (EE_FIELD_MAKE_HEADER(p) != EE_FIELD_HEADER_VALID) { + dev_err(&info->pdev->dev, + "Invalid signature '%08x' at slot %d\n", + EE_FIELD_MAKE_HEADER(p), slot->slotno); + slot->probe_failed = 1; + return -ENODEV; + } + + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_BOARD_NAME, + slot->board_name, sizeof(slot->board_name)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_VERSION, + slot->version, sizeof(slot->version)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_MANUFACTURER, + slot->manufacturer, sizeof(slot->manufacturer)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_PART_NUMBER, + slot->part_number, sizeof(slot->part_number)); + + /* board_name,version,manufacturer,part_number */ + snprintf(slot->text_id, sizeof(slot->text_id) - 1, + "%s,%s,%s,%s", slot->board_name, slot->version, + slot->manufacturer, slot->part_number); + + /* terminate always */ + slot->text_id[sizeof(slot->text_id) - 1] = '\0'; + +slot_fail_check: + /* slot has failed and we don't support hotpluging */ + if (slot->probe_failed) + return -ENODEV; + + return 0; +} + +/* return 0 if not matched,, 1 if matched */ +static int bone_match_cape(const char *match, + const char *part_number, const char *version) +{ + char *tmp_part_number, *tmp_version; + char *buf, *s, *e, *sn; + int found; + + if (match == NULL || part_number == NULL) + return 0; + + /* copy the argument to work on it */ + buf = kstrdup(match, GFP_KERNEL); + + /* no memory, too bad... */ + if (buf == NULL) + return 0; + + found = 0; + s = buf; + e = s + strlen(s); + while (s < e) { + /* find comma separator */ + sn = strchr(s, ','); + if (sn != NULL) + *sn++ = '\0'; + else + sn = e; + tmp_part_number = s; + tmp_version = strchr(tmp_part_number, ':'); + if (tmp_version != NULL) + *tmp_version++ = '\0'; + s = sn; + + /* the part names must match */ + if (strcmp(tmp_part_number, part_number) != 0) + continue; + + /* if there's no version, match any */ + if (version == NULL || tmp_version == NULL || + strcmp(version, tmp_version) == 0) { + found = 1; + break; + } + } + + kfree(buf); + + return found; +} + +/* helper method */ +static int of_multi_prop_cmp(const struct property *prop, const char *value) +{ + const char *cp; + int cplen, vlen, l; + + /* check if it's directly compatible */ + cp = prop->value; + cplen = prop->length; + vlen = strlen(value); + + while (cplen > 0) { + /* compatible? */ + if (of_compat_cmp(cp, value, vlen) == 0) + return 0; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + return -1; +} + +static ssize_t slot_ee_attr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct slot_ee_attribute *ee_attr = to_slot_ee_attribute(attr); + struct bone_cape_slot *slot = ee_attr->slot; + const struct ee_field *sig_field; + int i, len; + char *p, *s; + u16 val; + + /* add newline for ascii fields */ + sig_field = &cape_sig_fields[ee_attr->field]; + + len = sig_field->size + sig_field->ascii; + p = kmalloc(len, GFP_KERNEL); + if (p == NULL) + return -ENOMEM; + + s = cape_ee_field_get(slot->signature, ee_attr->field, p, len); + if (s == NULL) + return -EINVAL; + + /* add newline for ascii fields and return */ + if (sig_field->ascii) { + len = sprintf(buf, "%s\n", s); + goto out; + } + + /* case by case handling */ + switch (ee_attr->field) { + case CAPE_EE_FIELD_HEADER: + len = sprintf(buf, "%02x %02x %02x %02x\n", + s[0], s[1], s[2], s[3]); + break; + + /* 2 bytes */ + case CAPE_EE_FIELD_NUMBER_OF_PINS: + case CAPE_EE_FIELD_VDD_3V3EXP: + case CAPE_EE_FIELD_VDD_5V: + case CAPE_EE_FIELD_SYS_5V: + case CAPE_EE_FIELD_DC_SUPPLIED: + /* the bone is LE */ + val = s[0] & (s[1] << 8); + len = sprintf(buf, "%u\n", (unsigned int)val & 0xffff); + break; + + case CAPE_EE_FIELD_PIN_USAGE: + + len = 0; + for (i = 0; i < sig_field->size / 2; i++) { + /* the bone is LE */ + val = s[0] & (s[1] << 8); + sprintf(buf, "%04x\n", val); + buf += 5; + len += 5; + s += 2; + } + + break; + + default: + *buf = '\0'; + len = 0; + break; + } + +out: + kfree(p); + + return len; +} + +#define SLOT_EE_ATTR(_name, _field) \ + { \ + .devattr = __ATTR(_name, S_IRUGO, slot_ee_attr_show, NULL), \ + .field = CAPE_EE_FIELD_##_field, \ + .slot = NULL, \ + } + +static const struct slot_ee_attribute slot_ee_attrs[] = { + SLOT_EE_ATTR(header, HEADER), + SLOT_EE_ATTR(eeprom-format-revision, EEPROM_REV), + SLOT_EE_ATTR(board-name, BOARD_NAME), + SLOT_EE_ATTR(version, VERSION), + SLOT_EE_ATTR(manufacturer, MANUFACTURER), + SLOT_EE_ATTR(part-number, PART_NUMBER), + SLOT_EE_ATTR(number-of-pins, NUMBER_OF_PINS), + SLOT_EE_ATTR(serial-number, SERIAL_NUMBER), + SLOT_EE_ATTR(pin-usage, PIN_USAGE), + SLOT_EE_ATTR(vdd-3v3exp, VDD_3V3EXP), + SLOT_EE_ATTR(vdd-5v, VDD_5V), + SLOT_EE_ATTR(sys-5v, SYS_5V), + SLOT_EE_ATTR(dc-supplied, DC_SUPPLIED), +}; + +static int bone_cape_slot_sysfs_register(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct slot_ee_attribute *ee_attr; + struct attribute_group *attrgroup; + int i, err, sz; + + slot->ee_attr_name = kasprintf(GFP_KERNEL, "slot-%d", slot->slotno); + if (slot->ee_attr_name == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attr_name\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attr_name; + } + + slot->ee_attrs_count = ARRAY_SIZE(slot_ee_attrs); + + sz = slot->ee_attrs_count * sizeof(*slot->ee_attrs); + slot->ee_attrs = kmalloc(sz, GFP_KERNEL); + if (slot->ee_attrs == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs; + } + + attrgroup = &slot->attrgroup; + memset(attrgroup, 0, sizeof(*attrgroup)); + attrgroup->name = slot->ee_attr_name; + + sz = sizeof(*slot->ee_attrs_tab) * (slot->ee_attrs_count + 1); + attrgroup->attrs = kmalloc(sz, GFP_KERNEL); + if (attrgroup->attrs == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs_tab\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs_tab; + } + /* copy everything over */ + memcpy(slot->ee_attrs, slot_ee_attrs, sizeof(slot_ee_attrs)); + + /* bind this attr to the slot */ + for (i = 0; i < slot->ee_attrs_count; i++) { + ee_attr = &slot->ee_attrs[i]; + ee_attr->slot = slot; + attrgroup->attrs[i] = &ee_attr->devattr.attr; + } + attrgroup->attrs[i] = NULL; + + /* make lockdep happy */ + for (i = 0; i < slot->ee_attrs_count; i++) { + ee_attr = &slot->ee_attrs[i]; + sysfs_attr_init(&ee_attr->devattr.attr); + } + + err = sysfs_create_group(&dev->kobj, attrgroup); + if (err != 0) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs_tab\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs_group; + } + + return 0; + +err_fail_no_ee_attrs_group: + kfree(slot->ee_attrs_tab); +err_fail_no_ee_attrs_tab: + kfree(slot->ee_attrs); +err_fail_no_ee_attrs: + kfree(slot->ee_attr_name); +err_fail_no_ee_attr_name: + return err; +} + +static void bone_cape_slot_sysfs_unregister(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + + sysfs_remove_group(&dev->kobj, &slot->attrgroup); + kfree(slot->ee_attrs_tab); + kfree(slot->ee_attrs); + kfree(slot->ee_attr_name); +} + +static ssize_t bbrd_ee_attr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bbrd_ee_attribute *ee_attr = to_bbrd_ee_attribute(attr); + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_baseboard *bbrd = &info->baseboard; + const struct ee_field *sig_field; + u16 val; + int i, len; + char *p, *s; + + /* add newline for ascii fields */ + sig_field = &bbrd_sig_fields[ee_attr->field]; + + len = sig_field->size + sig_field->ascii; + p = kmalloc(len, GFP_KERNEL); + if (p == NULL) + return -ENOMEM; + + s = bbrd_ee_field_get(bbrd->signature, ee_attr->field, p, len); + if (s == NULL) + return -EINVAL; + + /* add newline for ascii fields and return */ + if (sig_field->ascii) { + len = sprintf(buf, "%s\n", s); + goto out; + } + + /* case by case handling */ + switch (ee_attr->field) { + case BBRD_EE_FIELD_HEADER: + len = sprintf(buf, "%02x %02x %02x %02x\n", + s[0], s[1], s[2], s[3]); + break; + + case BBRD_EE_FIELD_CONFIG_OPTION: + len = 0; + for (i = 0; i < sig_field->size / 2; i++) { + /* the bone is LE */ + val = s[0] & (s[1] << 8); + sprintf(buf, "%04x\n", val); + buf += 5; + len += 5; + s += 2; + } + break; + + default: + *buf = '\0'; + len = 0; + break; + } + +out: + kfree(p); + + return len; +} + +#define BBRD_EE_ATTR(_name, _field) \ + { \ + .devattr = __ATTR(_name, 0440, bbrd_ee_attr_show, NULL), \ + .field = BBRD_EE_FIELD_##_field, \ + } + +static struct bbrd_ee_attribute bbrd_ee_attrs[] = { + BBRD_EE_ATTR(header, HEADER), + BBRD_EE_ATTR(board-name, BOARD_NAME), + BBRD_EE_ATTR(revision, REVISION), + BBRD_EE_ATTR(serial-number, SERIAL_NUMBER), + BBRD_EE_ATTR(config-option, CONFIG_OPTION), +}; + +static struct attribute *bbrd_attrs_flat[] = { + &bbrd_ee_attrs[BBRD_EE_FIELD_HEADER].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_BOARD_NAME].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_REVISION].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_SERIAL_NUMBER].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_CONFIG_OPTION].devattr.attr, + NULL, +}; + +static const struct attribute_group bbrd_attr_group = { + .name = "baseboard", + .attrs = bbrd_attrs_flat, +}; + +static ssize_t slots_show(struct device *dev, struct device_attribute *attr, + char *buf); +static ssize_t slots_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); + +static DEVICE_ATTR(slots, 0644, slots_show, slots_store); + +static struct attribute *root_attrs_flat[] = { + &dev_attr_slots.attr, + NULL, +}; + +static const struct attribute_group root_attr_group = { + .attrs = root_attrs_flat, +}; + +static const struct attribute_group *attr_groups[] = { + &root_attr_group, + &bbrd_attr_group, + NULL, +}; + +static ssize_t slots_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_cape_slot *slot; + ssize_t len, sz; + + mutex_lock(&info->slots_list_mutex); + sz = 0; + list_for_each_entry(slot, &info->slot_list, node) { + + len = sprintf(buf, "%2d: %c%c%c%c%c%c %3d %s\n", + slot->slotno, + slot->probed ? 'P' : '-', + slot->probe_failed ? 'F' : '-', + slot->override ? 'O' : '-', + slot->loading ? 'l' : '-', + slot->loaded ? 'L' : '-', + slot->disabled ? 'D' : '-', + slot->overlay_id, slot->text_id); + + buf += len; + sz += len; + } + mutex_unlock(&info->slots_list_mutex); + + return sz; +} + +static ssize_t slots_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_cape_slot *slot; + struct device_node *pnode, *node; + char *s, *part_number, *version; + int ret; + int slotno; + + /* check for remove slot */ + if (strlen(buf) > 0 && buf[0] == '-') { + ret = kstrtoint(buf + 1, 10, &slotno); + if (ret != 0) + return ret; + + /* now load each (take lock to be sure */ + mutex_lock(&info->slots_list_mutex); + list_for_each_entry(slot, &info->slot_list, node) { + if (slotno == slot->slotno) + goto found; + } + + mutex_unlock(&info->slots_list_mutex); + return -ENODEV; +found: + /* the hardware slots just get unloaded */ + if (!slot->override) { + ret = capemgr_unload_slot(slot); + if (ret == 0) + dev_info(&pdev->dev, + "Unloaded slot #%d\n", slotno); + else + dev_err(&pdev->dev, + "Failed to unload slot #%d\n", slotno); + } else { + ret = capemgr_remove_slot_no_lock(slot); + if (ret == 0) + dev_info(&pdev->dev, + "Removed slot #%d\n", slotno); + else + dev_err(&pdev->dev, + "Failed to remove slot #%d\n", slotno); + } + mutex_unlock(&info->slots_list_mutex); + + return ret == 0 ? strlen(buf) : ret; + } + + part_number = kstrdup(buf, GFP_KERNEL); + if (part_number == NULL) + return -ENOMEM; + + /* remove trailing spaces dots and newlines */ + s = part_number + strlen(part_number); + while (s > part_number && + (isspace(s[-1]) || s[-1] == '\n' || s[-1] == '.')) + *--s = '\0'; + + version = strchr(part_number, ':'); + if (version != NULL) + *version++ = '\0'; + + dev_info(&pdev->dev, "part_number '%s', version '%s'\n", + part_number, version ? version : "N/A"); + + pnode = pdev->dev.of_node; + node = NULL; + slot = NULL; + ret = 0; + + /* no specific slot found, try immediate */ + slot = capemgr_add_slot(info, NULL, part_number, version, 0); + + if (IS_ERR_OR_NULL(slot)) { + dev_err(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr) - 1); + ret = slot ? PTR_ERR(slot) : -ENODEV; + slot = NULL; + goto err_fail; + } + + kfree(part_number); + + ret = capemgr_load_slot(slot); + if (ret != 0) + capemgr_remove_slot(slot); + + return ret == 0 ? strlen(buf) : ret; +err_fail: + of_node_put(node); + kfree(part_number); + return ret; +} + +/* verify the overlay */ +static int capemgr_verify_overlay(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct bone_baseboard *bbrd = &info->baseboard; + struct device_node *node = slot->overlay; + struct property *prop; + struct bone_cape_slot *slotn; + int err, counta, countb, i, j; + const char *ra, *rb; + + /* validate */ + if (node == NULL) { + dev_err(dev, "slot #%d: No overlay for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* check if the slot is compatible with the board */ + prop = of_find_property(node, "compatible", NULL); + + /* no compatible property? */ + if (prop == NULL) { + dev_err(dev, "slot #%d: No compatible property for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* verify that the cape is baseboard compatible */ + if (of_multi_prop_cmp(prop, bbrd->compatible_name) != 0) { + dev_err(dev, "slot #%d: Incompatible with baseboard for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* count the strings */ + counta = of_property_count_strings(node, "exclusive-use"); + /* no valid property, or no resources; no matter, it's OK */ + if (counta <= 0) + return 0; + + /* and now check if there's a resource conflict */ + err = 0; + mutex_lock(&info->slots_list_mutex); + for (i = 0; i < counta; i++) { + + ra = NULL; + err = of_property_read_string_index(node, "exclusive-use", + i, &ra); + if (err != 0) { + dev_err(dev, "slot #%d: Could not read string #%d\n", + slot->slotno, i); + break; + } + + list_for_each_entry(slotn, &info->slot_list, node) { + + /* don't check against self */ + if (slot == slotn) + continue; + + /* only check against loaded or loading slots */ + if (!slotn->loaded && !slotn->loading) + continue; + + countb = of_property_count_strings(slotn->overlay, + "exclusive-use"); + /* no valid property, or resources; it's OK */ + if (countb <= 0) + continue; + + + for (j = 0; j < countb; j++) { + + /* count the resources */ + rb = NULL; + err = of_property_read_string_index( + slotn->overlay, "exclusive-use", + j, &rb); + if (err != 0) { + /* error, but we don't care */ + err = 0; + break; + } + + /* ignore case; just in case ;) */ + if (strcasecmp(ra, rb) == 0) { + + /* resource conflict */ + err = -EEXIST; + dev_err(dev, + "slot #%d: %s conflict %s (#%d:%s)\n", + slot->slotno, + slot->part_number, ra, + slotn->slotno, + slotn->part_number); + goto out; + } + } + } + } +out: + mutex_unlock(&info->slots_list_mutex); + + return err; +} + +static int capemgr_load_slot(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + const char *dtbo; + int err; + + if (slot->probe_failed) { + dev_err(dev, "slot #%d: probe failed for '%s'\n", + slot->slotno, slot->part_number); + return -ENODEV; + } + + if (slot->loaded) { + dev_err(dev, "slot #%d: already loaded for '%s'\n", + slot->slotno, slot->part_number); + return -EAGAIN; + } + + /* make sure we don't leak this on repeated calls */ + kfree(slot->dtbo); + slot->dtbo = NULL; + + dev_dbg(dev, "slot #%d: Requesting part number/version based '%s-%s.dtbo\n", + slot->slotno, slot->part_number, slot->version); + + /* request the part number + .dtbo*/ + slot->dtbo = kasprintf(GFP_KERNEL, "%s-%s.dtbo", + slot->part_number, slot->version); + if (slot->dtbo == NULL) { + dev_err(dev, "slot #%d: Failed to get dtbo '%s'\n", + slot->slotno, dtbo); + return -ENOMEM; + } + + dev_dbg(dev, "slot #%d: Requesting firmware '%s' for board-name '%s', version '%s'%s\n", + slot->slotno, + slot->dtbo, slot->board_name, slot->version, + system_state == SYSTEM_BOOTING ? " - booting" : ""); + + err = request_firmware_direct(&slot->fw, slot->dtbo, dev); + if (err != 0) { + dev_dbg(dev, "failed to load firmware '%s'\n", slot->dtbo); + goto err_fail_no_fw; + } + + dev_dbg(dev, "slot #%d: dtbo '%s' loaded; converting to live tree\n", + slot->slotno, slot->dtbo); + + of_fdt_unflatten_tree((unsigned long *)slot->fw->data, &slot->overlay); + if (slot->overlay == NULL) { + dev_err(dev, "slot #%d: Failed to unflatten\n", + slot->slotno); + err = -EINVAL; + goto err_fail; + } + + /* mark it as detached */ + of_node_set_flag(slot->overlay, OF_DETACHED); + + /* perform resolution */ + err = of_resolve_phandles(slot->overlay); + if (err != 0) { + dev_err(dev, "slot #%d: Failed to resolve tree\n", + slot->slotno); + goto err_fail; + } + + err = capemgr_verify_overlay(slot); + if (err != 0) { + dev_err(dev, "slot #%d: Failed verification\n", + slot->slotno); + goto err_fail; + } + + err = of_overlay_create(slot->overlay); + if (err < 0) { + dev_err(dev, "slot #%d: Failed to create overlay\n", + slot->slotno); + goto err_fail; + } + slot->overlay_id = err; + + slot->loading = 0; + slot->loaded = 1; + + dev_info(dev, "slot #%d: dtbo '%s' loaded; overlay id #%d\n", + slot->slotno, slot->dtbo, slot->overlay_id); + + return 0; + +err_fail: + + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + slot->overlay = NULL; + + release_firmware(slot->fw); + slot->fw = NULL; + +err_fail_no_fw: + slot->loading = 0; + return err; +} + +static int capemgr_unload_slot(struct bone_cape_slot *slot) +{ + if (!slot->loaded || slot->overlay_id == -1) + return -EINVAL; + + of_overlay_destroy(slot->overlay_id); + slot->overlay_id = -1; + + slot->loaded = 0; + + return 0; + +} + +/* slots_list_mutex must be taken */ +static int capemgr_remove_slot_no_lock(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + int ret; + + if (slot == NULL) + return 0; + + if (slot->loaded && slot->overlay_id >= 0) { + /* unload just in case */ + ret = capemgr_unload_slot(slot); + if (ret != 0) { + dev_err(dev, "Unable to unload slot #%d\n", + slot->slotno); + return ret; + } + } + + /* if probed OK, remove the sysfs nodes */ + if (slot->probed && !slot->probe_failed) + bone_cape_slot_sysfs_unregister(slot); + + /* remove it from the list */ + list_del(&slot->node); + + if (slot->nvmem_cell) + nvmem_cell_put(slot->nvmem_cell); + devm_kfree(dev, slot); + return 0; +} + +static int capemgr_remove_slot(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + int ret; + + mutex_lock(&info->slots_list_mutex); + ret = capemgr_remove_slot_no_lock(slot); + mutex_unlock(&info->slots_list_mutex); + + return ret; +} + +static int bone_slot_fill_override(struct bone_cape_slot *slot, + const char *part_number, const char *version) +{ + const struct ee_field *sig_field; + int i, len, has_part_number; + char *p; + + slot->probe_failed = 0; + slot->probed = 0; + + /* zero out signature */ + memset(slot->signature, 0, + sizeof(slot->signature)); + + /* first, fill in all with override defaults */ + for (i = 0; i < ARRAY_SIZE(cape_sig_fields); i++) { + + sig_field = &cape_sig_fields[i]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + if (sig_field->override) + memcpy(p, sig_field->override, + sig_field->size); + else + memset(p, 0, sig_field->size); + } + + /* if a part_number is supplied use it */ + len = part_number ? strlen(part_number) : 0; + if (len > 0) { + sig_field = &cape_sig_fields[CAPE_EE_FIELD_PART_NUMBER]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + /* copy and zero out any remainder */ + if (len > sig_field->size) + len = sig_field->size; + memcpy(p, part_number, len); + if (len < sig_field->size) + memset(p + len, 0, sig_field->size - len); + + has_part_number = 1; + } + + /* if a version is supplied use it */ + len = version ? strlen(version) : 0; + if (len > 0) { + sig_field = &cape_sig_fields[CAPE_EE_FIELD_VERSION]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + /* copy and zero out any remainder */ + if (len > sig_field->size) + len = sig_field->size; + memcpy(p, version, len); + if (len < sig_field->size) + memset(p + len, 0, sig_field->size - len); + } + + /* we must have a part number */ + if (!has_part_number) + return -EINVAL; + + slot->override = 1; + + return 0; +} + +static struct bone_cape_slot * +capemgr_add_slot(struct capemgr_info *info, const char *slot_name, + const char *part_number, const char *version, int prio) +{ + struct bone_cape_slot *slot; + struct device *dev = &info->pdev->dev; + int slotno; + int ret; + + slotno = atomic_inc_return(&info->next_slot_nr) - 1; + + slot = devm_kzalloc(dev, sizeof(*slot), GFP_KERNEL); + if (slot == NULL) + return ERR_PTR(-ENOMEM); + + slot->info = info; + slot->slotno = slotno; + slot->priority = prio; + slot->overlay_id = -1; + + if (slot_name) { + slot->nvmem_cell = nvmem_cell_get(dev, slot_name); + if (IS_ERR(slot->nvmem_cell)) { + ret = PTR_ERR(slot->nvmem_cell); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to get slot eeprom cell\n"); + slot->nvmem_cell = NULL; + goto err_out; + } + } else { + dev_info(dev, "slot #%d: override\n", slotno); + + /* fill in everything with defaults first */ + ret = bone_slot_fill_override(slot, part_number, version); + if (ret != 0) { + dev_err(dev, "slot #%d: override failed\n", slotno); + goto err_out; + } + } + + ret = bone_slot_scan(slot); + if (ret != 0) { + + if (!slot->probe_failed) { + dev_err(dev, "slot #%d: scan failed\n", + slotno); + goto err_out; + } + + dev_err(dev, "slot #%d: No cape found\n", slotno); + /* but all is fine */ + } else { + + dev_info(dev, "slot #%d: '%s'\n", + slotno, slot->text_id); + + ret = bone_cape_slot_sysfs_register(slot); + if (ret != 0) { + dev_err(dev, "slot #%d: sysfs register failed\n", + slotno); + goto err_out; + } + + } + + /* add to the slot list */ + mutex_lock(&info->slots_list_mutex); + list_add_tail(&slot->node, &info->slot_list); + mutex_unlock(&info->slots_list_mutex); + + return slot; + +err_out: + if (slot->nvmem_cell) + nvmem_cell_put(slot->nvmem_cell); + devm_kfree(dev, slot); + return ERR_PTR(ret); +} + +/* return 1 if it makes sense to retry loading */ +static int retry_loading_condition(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct bone_cape_slot *slotn; + int ret; + + dev_dbg(dev, "loader: retry_loading slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + + mutex_lock(&info->slots_list_mutex); + ret = 0; + list_for_each_entry(slotn, &info->slot_list, node) { + /* if same slot or not loading skip */ + if (!slotn->loading || slotn->retry_loading) + continue; + /* at least one cape is still loading (without retrying) */ + ret = 1; + } + mutex_unlock(&info->slots_list_mutex); + return ret; +} + +/* return 1 if this slot is clear to try to load now */ +static int clear_to_load_condition(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + int my_prio = slot->priority; + struct device *dev = &info->pdev->dev; + int ret; + + dev_dbg(dev, "loader: check slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + mutex_lock(&info->slots_list_mutex); + ret = 1; + list_for_each_entry(slot, &info->slot_list, node) { + /* if any slot is loading with lowest priority */ + if (!slot->loading) + continue; + if (slot->priority < my_prio) { + ret = 0; + break; + } + } + mutex_unlock(&info->slots_list_mutex); + return ret; +} + +static int capemgr_loader(void *data) +{ + struct bone_cape_slot *slot = data; + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + int ret, done, other_loading, booting; + + done = 0; + + slot->retry_loading = 0; + + dev_dbg(dev, "loader: before slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* + * We have a basic priority based arbitration system + * Slots have priorities, so the lower priority ones + * should start loading first. So each time we end up + * here. + */ + ret = wait_event_interruptible(info->load_wq, + clear_to_load_condition(slot)); + if (ret < 0) { + dev_warn(dev, "loader, Signal pending\n"); + return ret; + } + + dev_dbg(dev, "loader: after slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* using the return value */ + ret = capemgr_load_slot(slot); + + /* wake up all just in case */ + wake_up_interruptible_all(&info->load_wq); + + if (ret == 0) + goto done; + + dev_dbg(dev, "loader: retrying slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* first attempt has failed; now try each time there's any change */ + slot->retry_loading = 1; + + for (;;) { + booting = (system_state == SYSTEM_BOOTING); + other_loading = retry_loading_condition(slot); + if (!booting && !other_loading) + break; + + /* simple wait for someone to kick us */ + if (other_loading) { + DEFINE_WAIT(__wait); + + prepare_to_wait(&info->load_wq, &__wait, + TASK_INTERRUPTIBLE); + finish_wait(&info->load_wq, &__wait); + } else { + /* always delay when booting */ + msleep(boot_scan_period); + } + + if (signal_pending(current)) { + dev_warn(dev, "loader, Signal pending\n"); + ret = -ERESTARTSYS; + goto done; + } + + /* using the return value */ + ret = capemgr_load_slot(slot); + if (ret == 0) + goto done; + + /* wake up all just in case */ + wake_up_interruptible_all(&info->load_wq); + } + +done: + slot->loading = 0; + slot->retry_loading = 0; + + if (ret == 0) { + dev_dbg(dev, "loader: done slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + } else { + dev_err(dev, "loader: failed to load slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + + /* if it's a override slot remove it */ + if (slot->override) + capemgr_remove_slot(slot); + } + + return ret; +} + +static int +capemgr_probe(struct platform_device *pdev) +{ + struct capemgr_info *info; + struct bone_baseboard *bbrd; + struct bone_cape_slot *slot; + struct device_node *pnode = pdev->dev.of_node; + struct device_node *baseboardmaps_node; + struct device_node *node; + const char *part_number; + const char *version; + const char *board_name; + const char *compatible_name; + char slot_name[16]; + u32 slots_nr; + int i, ret, len, prio; + long val; + char *wbuf, *s, *p, *e; + + /* we don't use platform_data at all; we require OF */ + if (pnode == NULL) + return -ENOTSUPP; + + info = devm_kzalloc(&pdev->dev, + sizeof(struct capemgr_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pdev = pdev; + platform_set_drvdata(pdev, info); + + atomic_set(&info->next_slot_nr, 0); + INIT_LIST_HEAD(&info->slot_list); + mutex_init(&info->slots_list_mutex); + + init_waitqueue_head(&info->load_wq); + + baseboardmaps_node = NULL; + + /* find the baseboard */ + bbrd = &info->baseboard; + + baseboardmaps_node = of_get_child_by_name(pnode, "baseboardmaps"); + if (baseboardmaps_node == NULL) { + dev_err(&pdev->dev, "Failed to get baseboardmaps node"); + ret = -ENODEV; + goto err_exit; + } + + bbrd->nvmem_cell = nvmem_cell_get(&pdev->dev, "baseboard"); + if (IS_ERR(bbrd->nvmem_cell)) { + ret = PTR_ERR(bbrd->nvmem_cell); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get baseboard eeprom cell\n"); + bbrd->nvmem_cell = NULL; + goto err_exit; + } + + ret = bone_baseboard_scan(bbrd); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to scan baseboard eeprom\n"); + goto err_exit; + } + + dev_info(&pdev->dev, "Baseboard: '%s'\n", bbrd->text_id); + + board_name = NULL; + compatible_name = NULL; + for_each_child_of_node(baseboardmaps_node, node) { + /* there must be board-name */ + if (of_property_read_string(node, "board-name", + &board_name) != 0 || + of_property_read_string(node, "compatible-name", + &compatible_name) != 0) + continue; + + if (strcmp(bbrd->board_name, board_name) == 0) + break; + } + of_node_put(baseboardmaps_node); + baseboardmaps_node = NULL; + + if (node == NULL) { + dev_err(&pdev->dev, "Failed to find compatible map for %s\n", + bbrd->board_name); + ret = -ENODEV; + goto err_exit; + } + bbrd->compatible_name = kstrdup(compatible_name, GFP_KERNEL); + if (bbrd->compatible_name == NULL) { + ret = -ENOMEM; + goto err_exit; + } + of_node_put(node); + + /* get slot number */ + ret = of_property_read_u32(pnode, "#slots", &slots_nr); + if (ret != 0) + slots_nr = 0; + + dev_info(&pdev->dev, "compatible-baseboard=%s - #slots=%d\n", + bbrd->compatible_name, slots_nr); + + for (i = 0; i < slots_nr; i++) { + snprintf(slot_name, sizeof(slot_name), "slot%d", i); + slot = capemgr_add_slot(info, slot_name, NULL, NULL, 0); + if (IS_ERR(slot)) { + dev_err(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr)); + ret = PTR_ERR(slot); + goto err_exit; + } + } + + /* iterate over enable_partno (if there) */ + if (enable_partno && strlen(enable_partno) > 0) { + + /* allocate a temporary buffer */ + wbuf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL); + if (wbuf == NULL) { + ret = -ENOMEM; + goto err_exit; + } + + /* add any enable_partno capes */ + s = enable_partno; + while (*s) { + /* form is PART[:REV[:PRIO]],PART.. */ + p = strchr(s, ','); + if (p == NULL) + e = s + strlen(s); + else + e = p; + + /* copy to temp buffer */ + len = e - s; + if (len >= PAGE_SIZE - 1) + len = PAGE_SIZE - 1; + memcpy(wbuf, s, len); + wbuf[len] = '\0'; + + /* move to the next */ + s = *e ? e + 1 : e; + + part_number = wbuf; + + /* default version is NULL & prio is 0 */ + version = NULL; + prio = 0; + + /* now split the rev & prio part */ + p = strchr(wbuf, ':'); + if (p != NULL) { + *p++ = '\0'; + if (*p != ':') + version = p; + p = strchr(p, ':'); + if (p != NULL) { + *p++ = '\0'; + ret = kstrtol(p, 10, &val); + if (ret == 0) + prio = val; + } + } + + dev_info(&pdev->dev, + "enabled_partno PARTNO '%s' VER '%s' PR '%d'\n", + part_number, + version ? version : "N/A", prio); + + /* only immediate slots are allowed here */ + slot = capemgr_add_slot(info, NULL, + part_number, version, prio); + + /* we continue even in case of an error */ + if (IS_ERR_OR_NULL(slot)) { + dev_warn(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr) - 1); + } + } + + devm_kfree(&pdev->dev, wbuf); + } + + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "Failed to pm_runtime_get_sync()\n"); + goto err_exit; + } + + pm_runtime_put(&pdev->dev); + + /* it is safe to create the attribute groups */ + ret = sysfs_create_groups(&pdev->dev.kobj, attr_groups); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to create sysfs attributes\n"); + goto err_exit; + } + /* automatically cleared by driver core now */ + pdev->dev.groups = attr_groups; + + /* now load each (take lock to be sure */ + mutex_lock(&info->slots_list_mutex); + + list_for_each_entry(slot, &info->slot_list, node) { + + /* if matches the disabled ones skip */ + if (bone_match_cape(disable_partno, slot->part_number, + slot->version)) { + dev_info(&pdev->dev, + "Skipping loading of disabled cape with part# %s\n", + slot->part_number); + slot->disabled = 1; + continue; + } + + if (!slot->probe_failed && !slot->loaded) + slot->loading = 1; + } + + /* now start the loader thread(s) (all at once) */ + list_for_each_entry(slot, &info->slot_list, node) { + + if (!slot->loading) + continue; + + slot->loader_thread = kthread_run(capemgr_loader, + slot, "capemgr-loader-%d", + slot->slotno); + if (IS_ERR(slot->loader_thread)) { + dev_warn(&pdev->dev, "slot #%d: Failed to start loader\n", + slot->slotno); + slot->loader_thread = NULL; + } + } + mutex_unlock(&info->slots_list_mutex); + + dev_info(&pdev->dev, "initialized OK.\n"); + + return 0; + +err_exit: + if (bbrd->nvmem_cell) + nvmem_cell_put(bbrd->nvmem_cell); + of_node_put(baseboardmaps_node); + platform_set_drvdata(pdev, NULL); + devm_kfree(&pdev->dev, info); + + return ret; +} + +static int capemgr_remove(struct platform_device *pdev) +{ + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_baseboard *bbrd = &info->baseboard; + struct bone_cape_slot *slot, *slotn; + int ret; + + mutex_lock(&info->slots_list_mutex); + list_for_each_entry_safe(slot, slotn, &info->slot_list, node) + capemgr_remove_slot_no_lock(slot); + mutex_unlock(&info->slots_list_mutex); + + platform_set_drvdata(pdev, NULL); + + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) + return ret; + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + if (bbrd->nvmem_cell) + nvmem_cell_put(bbrd->nvmem_cell); + devm_kfree(&pdev->dev, info); + + return 0; +} + +static struct platform_driver capemgr_driver = { + .probe = capemgr_probe, + .remove = capemgr_remove, + .driver = { + .name = "bone_capemgr", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(capemgr_of_match), + }, +}; + +module_platform_driver(capemgr_driver); + +MODULE_AUTHOR("Pantelis Antoniou"); +MODULE_DESCRIPTION("Beaglebone cape manager"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bone_capemgr"); diff --git b/drivers/misc/cape/Kconfig b/drivers/misc/cape/Kconfig new file mode 100644 index 0000000..a2ef85e --- /dev/null +++ b/drivers/misc/cape/Kconfig @@ -0,0 +1,5 @@ +# +# Capes +# + +source "drivers/misc/cape/beaglebone/Kconfig" diff --git b/drivers/misc/cape/Makefile b/drivers/misc/cape/Makefile new file mode 100644 index 0000000..7c4eb96 --- /dev/null +++ b/drivers/misc/cape/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for cape like devices +# + +obj-y += beaglebone/ diff --git b/drivers/misc/cape/beaglebone/Kconfig b/drivers/misc/cape/beaglebone/Kconfig new file mode 100644 index 0000000..eeb6782 --- /dev/null +++ b/drivers/misc/cape/beaglebone/Kconfig @@ -0,0 +1,10 @@ +# +# Beaglebone capes +# + +config BEAGLEBONE_PINMUX_HELPER + tristate "Beaglebone Pinmux Helper" + depends on ARCH_OMAP2PLUS && OF + default n + help + Say Y here to include support for the pinmux helper diff --git b/drivers/misc/cape/beaglebone/Makefile b/drivers/misc/cape/beaglebone/Makefile new file mode 100644 index 0000000..7f4617a --- /dev/null +++ b/drivers/misc/cape/beaglebone/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for beaglebone capes +# + +obj-$(CONFIG_BEAGLEBONE_PINMUX_HELPER) += bone-pinmux-helper.o diff --git b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c new file mode 100644 index 0000000..d81363a --- /dev/null +++ b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c @@ -0,0 +1,242 @@ +/* + * Pinmux helper driver + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct of_device_id bone_pinmux_helper_of_match[] = { + { + .compatible = "bone-pinmux-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, bone_pinmux_helper_of_match); + +struct pinmux_helper_data { + struct pinctrl *pinctrl; + char *selected_state_name; +}; + +static ssize_t pinmux_helper_show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + const char *name; + + name = data->selected_state_name; + if (name == NULL || strlen(name) == 0) + name = "none"; + return sprintf(buf, "%s\n", name); +} + +static ssize_t pinmux_helper_store_state(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + struct pinctrl_state *state; + char *state_name; + char *s; + int err; + + /* duplicate (as a null terminated string) */ + state_name = kmalloc(count + 1, GFP_KERNEL); + if (state_name == NULL) + return -ENOMEM; + memcpy(state_name, buf, count); + state_name[count] = '\0'; + + /* and chop off newline */ + s = strchr(state_name, '\n'); + if (s != NULL) + *s = '\0'; + + /* try to select default state at first (if it exists) */ + state = pinctrl_lookup_state(data->pinctrl, state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) + dev_err(dev, "Failed to select state %s\n", + state_name); + } else { + dev_err(dev, "Failed to find state %s\n", state_name); + err = PTR_RET(state); + } + + if (err == 0) { + kfree(data->selected_state_name); + data->selected_state_name = state_name; + } + + return err ? err : count; +} + +static DEVICE_ATTR(state, S_IWUSR | S_IRUGO, + pinmux_helper_show_state, pinmux_helper_store_state); + +static struct attribute *pinmux_helper_attributes[] = { + &dev_attr_state.attr, + NULL +}; + +static const struct attribute_group pinmux_helper_attr_group = { + .attrs = pinmux_helper_attributes, +}; + +static int bone_pinmux_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pinmux_helper_data *data; + struct pinctrl_state *state; + char *state_name; + const char *mode_name; + int mode_len; + int err; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Failed to allocate data\n"); + err = -ENOMEM; + goto err_no_mem; + } + + state_name = kmalloc(strlen(PINCTRL_STATE_DEFAULT) + 1, + GFP_KERNEL); + if (state_name == NULL) { + dev_err(dev, "Failed to allocate state name\n"); + err = -ENOMEM; + goto err_no_state_mem; + } + data->selected_state_name = state_name; + strcpy(data->selected_state_name, PINCTRL_STATE_DEFAULT); + + platform_set_drvdata(pdev, data); + + data->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(data->pinctrl)) { + dev_err(dev, "Failed to get pinctrl\n"); + err = PTR_RET(data->pinctrl); + goto err_no_pinctrl; + } + + /* See if an initial mode is specified in the device tree */ + mode_name = of_get_property(dev->of_node, "mode", &mode_len); + + err = -1; + if (mode_name != NULL ) { + state_name = kmalloc(mode_len + 1, GFP_KERNEL); + if (state_name == NULL) { + dev_err(dev, "Failed to allocate state name\n"); + err = -ENOMEM; + goto err_no_mode_mem; + } + strncpy(state_name, mode_name, mode_len); + + /* try to select requested mode */ + state = pinctrl_lookup_state(data->pinctrl, state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) { + dev_warn(dev, "Unable to select requested mode %s\n", state_name); + kfree(state_name); + } else { + kfree(data->selected_state_name); + data->selected_state_name = state_name; + dev_notice(dev, "Set initial pinmux mode to %s\n", state_name); + } + } + } + + /* try to select default state if mode_name failed */ + if ( err != 0) { + state = pinctrl_lookup_state(data->pinctrl, + data->selected_state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) { + dev_err(dev, "Failed to select default state\n"); + goto err_no_state; + } + } else { + data->selected_state_name = '\0'; + } + } + + /* Register sysfs hooks */ + err = sysfs_create_group(&dev->kobj, &pinmux_helper_attr_group); + if (err) { + dev_err(dev, "Failed to create sysfs group\n"); + goto err_no_sysfs; + } + + return 0; + +err_no_sysfs: +err_no_state: +err_no_mode_mem: + devm_pinctrl_put(data->pinctrl); +err_no_pinctrl: + devm_kfree(dev, data->selected_state_name); +err_no_state_mem: + devm_kfree(dev, data); +err_no_mem: + return err; +} + +static int bone_pinmux_helper_remove(struct platform_device *pdev) +{ + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + sysfs_remove_group(&dev->kobj, &pinmux_helper_attr_group); + kfree(data->selected_state_name); + devm_pinctrl_put(data->pinctrl); + devm_kfree(dev, data); + + return 0; +} + +struct platform_driver bone_pinmux_helper_driver = { + .probe = bone_pinmux_helper_probe, + .remove = bone_pinmux_helper_remove, + .driver = { + .name = "bone-pinmux-helper", + .owner = THIS_MODULE, + .of_match_table = bone_pinmux_helper_of_match, + }, +}; + +module_platform_driver(bone_pinmux_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou"); +MODULE_DESCRIPTION("Beaglebone pinmux helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bone-pinmux-helper"); diff --git b/drivers/misc/cape_bone_argus/Kconfig b/drivers/misc/cape_bone_argus/Kconfig new file mode 100644 index 0000000..1b39661 --- /dev/null +++ b/drivers/misc/cape_bone_argus/Kconfig @@ -0,0 +1,7 @@ +comment "Argus cape driver for beaglebone black" + +config CAPE_BONE_ARGUS + tristate "Argus Cape Driver" + default M + help + Argus Cape Driver diff --git b/drivers/misc/cape_bone_argus/Makefile b/drivers/misc/cape_bone_argus/Makefile new file mode 100644 index 0000000..5482562 --- /dev/null +++ b/drivers/misc/cape_bone_argus/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Argus cape +# + +obj-$(CONFIG_CAPE_BONE_ARGUS) += cape_bone_argus.o diff --git b/drivers/misc/cape_bone_argus/cape_bone_argus.c b/drivers/misc/cape_bone_argus/cape_bone_argus.c new file mode 100644 index 0000000..c434218 --- /dev/null +++ b/drivers/misc/cape_bone_argus/cape_bone_argus.c @@ -0,0 +1,415 @@ +/* -*- linux-c -*- */ + +/* Linux Kernel Module for Breakaway Systems UPS control. + * + * PUBLIC DOMAIN + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Module to sync file systems leaving them mounted read-only, + * then signal the UPS that it is safe to remove + * power, and finally halt the processor. + * Also to allow kicking the watchdog from user mode. + */ +#undef DEBUG_ARGUS + +#define N_GPIOS 9 /* Total number of GPIOS used */ + +#define REQ_GPIO_IDX 0 /* Indices got GPIOS */ +#define ACK_GPIO_IDX 1 +#define WDG_GPIO_IDX 2 +#define LED1_GREEN_IDX 3 +#define LED1_RED_IDX 4 +#define LED2_GREEN_IDX 5 +#define LED2_RED_IDX 6 +#define GEN_OUT1_IDX 7 +#define GEN_OUT2_IDX 8 + +static struct argus_ups_info { /* As there is only one UPS device we can make this static */ + struct fasync_struct *async_queue; /* asynchronous readers */ + struct platform_device *pdev; + struct pwm_device *pwm_dev; + struct gpio gpios[N_GPIOS]; +} info = {NULL, NULL, NULL, /* Some fields filled in by device tree, probe, etc. */ + { + {-1, GPIOF_IN, "Powerdown request"}, + {-1, GPIOF_OUT_INIT_LOW, "Powerdown acknowledge" }, + {-1, GPIOF_OUT_INIT_LOW, "Watchdog"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 1 Green"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 1 Red"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 2 Green"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 2 Red"}, + {-1, GPIOF_OUT_INIT_LOW, "General Output #1"}, + {-1, GPIOF_OUT_INIT_LOW, "General Output #2"} + }, +}; + + +static const struct of_device_id argus_ups_of_ids[] = { + { .compatible = "argus-ups" }, + { } +}; + +static int argus_ups_major; /* Major device number */ + +static struct class *argus_ups_class; /* /sys/class */ + +dev_t argus_ups_dev; /* Device number */ + +static struct cdev *argus_ups_cdev; /* Character device details */ + +static void argus_ups_function(struct work_struct *ignored); /* Work function */ + +static DECLARE_DELAYED_WORK(argus_ups_work, argus_ups_function); /* Kernel workqueue glue */ + +static struct workqueue_struct *argus_ups_workqueue; /* Kernel workqueue */ + +static int debug = 0; +module_param(debug, int, S_IRUGO); +MODULE_PARM_DESC(debug, "Debug flag"); + +static int shutdown = 1; +module_param(shutdown, int, S_IRUGO); +MODULE_PARM_DESC(shutdown, "Shutdown flag"); + +#ifdef DEBUG_ARGUS +static char* fs_type_names[] = {"vfat", "ext4"}; /* File system names that may need syncing. */ +#endif + +/* Just kick watchdog */ + +static ssize_t argus_ups_write(struct file *filp, const char __user *buf, size_t count, + loff_t *f_pos) +{ + int i; + if (debug >= 3) { + printk("Writing to watchdog - count:%d\n", count); + } + for (i = 0; i < count; i++) { + gpio_set_value(info.gpios[WDG_GPIO_IDX].gpio, 1); /* Set it */ + msleep(10); /* Wait */ + gpio_set_value(info.gpios[WDG_GPIO_IDX].gpio, 0); /* End clearing it */ + msleep(10); + } + return count; /* Always returns what we sent, regardsless */ +} + +static long argus_ups_ioctl(struct file *file, + unsigned int ioctl, + unsigned long param) +{ + if (debug >= 4) { + printk(KERN_ERR "ioctl: %d, param: %ld\n", ioctl, param); + } + switch(ioctl) { + case 10001: { + debug = param; + printk("Debug set to %d\n", debug); + break; + } + case 10002: { + unsigned char value = param & 0x0F; + unsigned char mask = (param >> 4) & 0x0F; + int i; /* Loop iterator */ + if (mask == 0) { + printk(KERN_ERR "Pointless mask of zero!\n"); + } + for (i = 0; i < 4; i++) { /* For all four LEDS */ + if (mask & (1 << i)) { /* Only masked values */ + if (value & (1 << i)) { /* On - so gpio is hi */ + if (debug >= 4) { + printk("Setting %d hi, ", + info.gpios[LED1_GREEN_IDX + i].gpio); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX + i].gpio, 1); + } + else { /* Off - so gpio is lo */ + if (debug >= 4) { + printk("Setting %d lo, ", + info.gpios[LED1_GREEN_IDX + i].gpio); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX + i].gpio, 0); + } + } + } + if (debug >= 4) { + printk("\n"); + } + break; + } + case 10003: { + gpio_set_value(info.gpios[GEN_OUT1_IDX].gpio, param & 1); + break; + } + case 10004: { + gpio_set_value(info.gpios[GEN_OUT2_IDX].gpio, param & 1); + break; + } + default: + { + printk(KERN_ERR "Invalid ioctl %d\n", ioctl); + return -1; + } + } + return 0; +} + +static int argus_ups_fasync(int fd, struct file *filp, int mode) +{ + printk(KERN_ERR "In argus_ups_fasync() fd:%d, filp:%p, mode:%d\n", fd, filp, mode); + return fasync_helper(fd, filp, mode, &info.async_queue); +} + +static struct file_operations argus_ups_fops = { /* Only file operation is to kick watchdog via a write */ + .owner = THIS_MODULE, + .llseek = NULL, + .read = NULL, + .unlocked_ioctl = argus_ups_ioctl, + .write = argus_ups_write, + .open = NULL, + .release = NULL, + .fasync = argus_ups_fasync, +}; + +#ifdef DEBUG_ARGUS +static void remount_sb(struct super_block *sb) +{ + int flags = MS_RDONLY; + int result = sb->s_op->remount_fs(sb, &flags, ""); + if (debug) { + printk("Processing superblock %p\n", sb); + printk("Remount operation returned %d\n", result); + } +} +#endif + +static void argus_ups_function(struct work_struct *ignored) +{ + static int testdata = 0; /* Data for test */ + int i; /* Iterator */ + testdata++; + if (!gpio_get_value(info.gpios[REQ_GPIO_IDX].gpio)) { + queue_delayed_work(argus_ups_workqueue, &argus_ups_work, HZ/100); /* Re-queue in 10mS*/ + return; + } + printk(KERN_ERR "Request received\n"); + if (debug) { + printk("Shutdown request received from UPS\n"); + } + if (!shutdown) { + printk("Shutdown request ignored\n"); + return; + } + + if (debug) { + printk("Sending async kill SIGIO to %p\n", info.async_queue); + } + if (info.async_queue) { /* Try and tell usermode to halt system */ + kill_fasync(&info.async_queue, SIGIO, POLL_IN); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX].gpio, 0); /* Turn off green LED1 */ + for (i = 0; i < 300; i++) { /* Toggle acknowledge at 10 Hz for 15 seconds */ + if (debug >= 2) { + printk("Waiting for first shutdown request:%d\n", i); + } + gpio_set_value(info.gpios[ACK_GPIO_IDX].gpio, i & 1); /* Toggle acknowledge */ + gpio_set_value(info.gpios[LED1_RED_IDX].gpio, i & 1); /* and LED1 red */ + msleep(50); /* Wait in 50ms increments */ + } + + { + char *argv[] = { "/sbin/halt", NULL }; + static char *envp[] = { + "HOME=/", + "TERM=linux", + "PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin", NULL }; + + call_usermodehelper( argv[0], argv, envp, UMH_WAIT_PROC ); + } + for (i = 0; i < 300; i++) { /* Toggle acknowledge at 10 Hz for 15 more seconds */ + if (debug >= 2) { + printk("Waiting for second shutdown request:%d\n", i); + } + gpio_set_value(info.gpios[ACK_GPIO_IDX].gpio, i & 1); /* Toggle acknowledge */ + gpio_set_value(info.gpios[LED1_RED_IDX].gpio, i & 1); /* and LED1 red */ + msleep(50); /* Wait in 50ms increments */ + } + printk(KERN_ERR "Usermode failed to halt system\n"); + kernel_halt(); /* Last resort - may give some oopss */ +} + + +static int argus_ups_probe(struct platform_device *pdev) /* Entry point */ +{ + struct pinctrl *pinctrl; + struct device_node *pnode = pdev->dev.of_node; + int i; + int ret; + printk("Init UPS module - debug=%d, shutdown=%d\n", + debug, shutdown); + platform_set_drvdata(pdev, &info); + info.pdev = pdev; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + return -1; + } + ret = of_property_read_u32(pnode, "debug", &debug); + if (ret != 0) { + dev_err(&pdev->dev, "Unable to read debug parameter\n"); + } + else { + printk("Debug parameter read from DT:%d\n", debug); + } + + ret = of_property_read_u32(pnode, "shutdown", &shutdown); + if (ret != 0) { + dev_err(&pdev->dev, "Unable to read shutdown parameter\n"); + } + else { + printk("Shutdown parameter read from DT:%d\n", shutdown); + } + + ret = of_gpio_count(pnode); + + if (ret != N_GPIOS) { + printk(KERN_ERR "Wrong number of gpios"); + return -1; + } + + for (i = 0; i < of_gpio_count(pnode); i++) { + ret = of_get_gpio_flags(pnode, i, NULL); + if (debug) { + printk("GPIO#%d:%d\n", i, ret); + } + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "unable to get GPIO %d\n", i); + goto err_no_gpio; + } + info.gpios[i].gpio = ret; + } + + + ret = alloc_chrdev_region(&argus_ups_dev, 0, 2, "argus_ups"); + argus_ups_major = MAJOR(argus_ups_dev); + if (ret) { + printk(KERN_ERR "Error %d adding argus_ups\n", ret); + return -1; + } + if (debug) { + printk("argus_ups major: %d\n", argus_ups_major); + } + argus_ups_cdev = cdev_alloc(); /* Make this a character device */ + argus_ups_cdev->ops = &argus_ups_fops; /* File operations */ + argus_ups_cdev->owner = THIS_MODULE; /* Top level device */ + ret = cdev_add(argus_ups_cdev, argus_ups_dev, 1); /* Add it to the kernel */ + if (ret) { + printk(KERN_ERR "cdev_add returned %d\n", ret); + unregister_chrdev_region(0, 1); + return -1; + } + ret = gpio_request_array(info.gpios, N_GPIOS); + if (ret) { + printk(KERN_ERR "Error %d requesting GPIOs\n", ret); + unregister_chrdev_region(0, 1); + return -1; + } + + argus_ups_class = class_create(THIS_MODULE, "argus_ups"); /* /sys/class entry for udev */ + if (IS_ERR(argus_ups_class)) { + printk(KERN_ERR "Error creating argus_ups_class\n"); + unregister_chrdev_region(0, 1); + return -1; + } + device_create(argus_ups_class, NULL, MKDEV(argus_ups_major, 0), NULL, "argus_ups"); + argus_ups_workqueue = create_singlethread_workqueue("argus_ups"); + INIT_DELAYED_WORK(&argus_ups_work, argus_ups_function); + queue_delayed_work(argus_ups_workqueue, &argus_ups_work, 0); /* Start work immediately */ + + return 0; +err_no_gpio: + return ret; + +} + + +static void argus_ups_cleanup(void) +{ + printk("Module cleanup called\n"); + while (cancel_delayed_work(&argus_ups_work) == 0) { + flush_workqueue(argus_ups_workqueue); /* Make sure all work is completed */ + } + destroy_workqueue(argus_ups_workqueue); + gpio_free_array(info.gpios, N_GPIOS); + device_destroy(argus_ups_class, argus_ups_dev); + class_destroy(argus_ups_class); + unregister_chrdev_region(argus_ups_dev, 1); + cdev_del(argus_ups_cdev); +} + + + +static int argus_ups_remove(struct platform_device *pdev) +{ + printk("In argus_ups_remove()\n"); + argus_ups_cleanup(); + printk("After cleanup\n"); + return 0; +} + +#define ARGUS_UPS_PM_OPS NULL + +struct platform_driver argus_ups_driver = { + .probe = argus_ups_probe, + .remove = argus_ups_remove, + .driver = { + .name = "argus-ups", + .owner = THIS_MODULE, + .pm = ARGUS_UPS_PM_OPS, + .of_match_table = argus_ups_of_ids, + }, +}; + + +static int __init argus_ups_init(void) +{ + return platform_driver_probe(&argus_ups_driver, + argus_ups_probe); +} + +static void __exit argus_ups_exit(void) +{ + platform_driver_unregister(&argus_ups_driver); + printk("After driver unregister\n"); +} + +module_init(argus_ups_init); +module_exit(argus_ups_exit); + +/* + * Get rid of taint message. + */ +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Lambert"); /* Who wrote this module? */ +MODULE_DESCRIPTION("Argus UPS control"); /* What does this module do */ +MODULE_ALIAS("platform:argus-ups"); +MODULE_DEVICE_TABLE(of, argus_ups_of_ids); diff --git b/drivers/misc/devovmgr.c b/drivers/misc/devovmgr.c new file mode 100644 index 0000000..18ea187 --- /dev/null +++ b/drivers/misc/devovmgr.c @@ -0,0 +1,1300 @@ +/* + * Device overlay manager + * + * Copyright (C) 2015 Konsulko Group + * Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +enum dovmgr_type { + ITEM_PCI, + ITEM_USB +}; + +struct dovmgr_item; + +struct dovmgr_dev_item { + struct dovmgr_item *item; + struct list_head node; + struct device *dev; + const struct firmware *fw; + struct device_node *overlay; + int overlay_id; + struct work_struct work; +}; + +struct dovmgr_item { + struct config_item item; + char *path; + bool enable; + char *overlay_name; + struct mutex dev_item_mutex; + struct list_head dev_item_list; + enum dovmgr_type type; + union { + struct pci_device_id pci; + struct usb_device_id usb; + }; +}; + +struct config_group dovmgr_pci_group; +struct config_group dovmgr_usb_group; + +static inline struct dovmgr_item *to_dovmgr_item(struct config_item *cfsitem) +{ + if (!cfsitem) + return NULL; + + return container_of(cfsitem, struct dovmgr_item, item); +} + +static int dovmgr_notifier_action(struct config_group *group, + unsigned long action, struct device *dev, + int (*do_match)(struct dovmgr_item *item, struct device *dev), + int (*do_action)(struct dovmgr_item *item, unsigned long action, + struct device *dev)) +{ + struct config_item *cfsitem; + struct dovmgr_item *item; + int ret; + + /* only handle device notifiers */ + if (action != BUS_NOTIFY_ADD_DEVICE && + action != BUS_NOTIFY_DEL_DEVICE && + action != BUS_NOTIFY_REMOVED_DEVICE) + return 0; + + ret = 0; + mutex_lock(&group->cg_subsys->su_mutex); + list_for_each_entry(cfsitem, &group->cg_children, ci_entry) { + item = to_dovmgr_item(cfsitem); + if (!item->enable || !(*do_match)(item, dev)) + continue; + + ret = (*do_action)(item, action, dev); + if (ret != 0) + break; + } + mutex_unlock(&group->cg_subsys->su_mutex); + return ret; +} + +#if IS_ENABLED(CONFIG_PCI) +/* copy of drivers/pci/pci.h */ +static inline const struct pci_device_id * +pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev) +{ + if ((id->vendor == PCI_ANY_ID || id->vendor == dev->vendor) && + (id->device == PCI_ANY_ID || id->device == dev->device) && + (id->subvendor == PCI_ANY_ID || + id->subvendor == dev->subsystem_vendor) && + (id->subdevice == PCI_ANY_ID || + id->subdevice == dev->subsystem_device) && + !((id->class ^ dev->class) & id->class_mask)) + return id; + return NULL; +} + +static int dovmgr_pci_item_match(struct dovmgr_item *item, struct device *dev) +{ + struct pci_dev *pdev; + + BUG_ON(item->type != ITEM_PCI); + pdev = to_pci_dev(dev); + + return pci_match_one_device(&item->pci, pdev) != NULL; +} +#endif + +#if IS_ENABLED(CONFIG_USB) +/* in drivers/usb/core/driver.c */ +extern int usb_match_device(struct usb_device *dev, + const struct usb_device_id *id); + +static int dovmgr_usb_item_match(struct dovmgr_item *item, struct device *dev) +{ + struct usb_device *udev; + + BUG_ON(item->type != ITEM_USB); + udev = to_usb_device(dev); + + return usb_match_device(udev, &item->usb); +} +#endif + +static struct dovmgr_dev_item *dovmgr_lookup_dev_item(struct dovmgr_item *item, + struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + list_for_each_entry(ditem, &item->dev_item_list, node) + if (ditem->dev == dev) + return ditem; + return NULL; +} + +static void dovmgr_item_work_func(struct work_struct *work) +{ + struct dovmgr_dev_item *ditem = container_of(work, + struct dovmgr_dev_item, work); + struct dovmgr_item *item = ditem->item; + struct device *dev; + struct device_node *np; + int err; + + mutex_lock(&item->dev_item_mutex); + + dev = ditem->dev; + np = dev->of_node; + if (!dev || !np || !item->overlay_name || ditem->overlay_id >= 0) + goto out_unlock; + + pr_info("%s: %s %s\n", __func__, + kobject_name(&dev->kobj), of_node_full_name(np)); + + err = request_firmware_direct(&ditem->fw, item->overlay_name, dev); + if (err != 0) { + pr_err("%s: %s failed to load firmware '%s'\n", __func__, + kobject_name(&dev->kobj), item->overlay_name); + goto out_unlock; + } + + of_fdt_unflatten_tree((void *)ditem->fw->data, &ditem->overlay); + if (ditem->overlay == NULL) { + pr_err("%s: %s failed to load firmware '%s'\n", __func__, + kobject_name(&dev->kobj), item->overlay_name); + goto out_release_fw; + } + + /* mark it as detached */ + of_node_set_flag(ditem->overlay, OF_DETACHED); + + /* perform resolution */ + err = of_resolve_phandles(ditem->overlay); + if (err != 0) { + pr_err("%s: %s failed to resolve tree\n", __func__, + kobject_name(&dev->kobj)); + goto out_release_overlay; + } + + err = of_overlay_create_target_root(ditem->overlay, np); + if (err < 0) { + pr_err("%s: %s failed to create overlay\n", __func__, + kobject_name(&dev->kobj)); + goto out_release_overlay; + } + ditem->overlay_id = err; + +out_unlock: + mutex_unlock(&item->dev_item_mutex); + return; + +out_release_overlay: + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + ditem->overlay = NULL; +out_release_fw: + release_firmware(ditem->fw); + ditem->fw = NULL; + goto out_unlock; +} + +/* dev item list mutex lock must be held */ +static int dovmgr_add_dev_item(struct dovmgr_item *item, struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + /* first make sure there's no duplicate */ + if (dovmgr_lookup_dev_item(item, dev)) + return -EEXIST; + + /* add the device item */ + ditem = kzalloc(sizeof(*ditem), GFP_KERNEL); + if (!ditem) + return -ENOMEM; + ditem->overlay_id = -1; + ditem->dev = get_device(dev); + INIT_WORK(&ditem->work, dovmgr_item_work_func); + ditem->item = item; + + list_add_tail(&ditem->node, &item->dev_item_list); + + pr_info("%s: added device %s from item's %s list\n", __func__, + kobject_name(&dev->kobj), + config_item_name(&item->item)); + + /* now schedule the overlay application */ + if (item->overlay_name) + schedule_work(&ditem->work); + + return 0; +} + +static int dovmgr_remove_dev_item(struct dovmgr_item *item, struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + /* find it */ + ditem = dovmgr_lookup_dev_item(item, dev); + if (!ditem) + return -ENODEV; + + if (work_pending(&ditem->work)) + cancel_work_sync(&ditem->work); + + if (ditem->overlay_id >= 0) { + of_overlay_destroy(ditem->overlay_id); + ditem->overlay_id = -1; + + } + + if (ditem->overlay) { + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + ditem->overlay = NULL; + } + + if (ditem->fw) { + /* TODO release_firmware(ditem->fw); */ + release_firmware(ditem->fw); + ditem->fw = NULL; + } + + put_device(ditem->dev); + list_del(&ditem->node); + + kfree(ditem); + + pr_info("%s: removed device %s from item's %s list\n", __func__, + kobject_name(&dev->kobj), + config_item_name(&item->item)); + + return 0; +} + +static int dovmgr_item_notify(struct dovmgr_item *item, + unsigned long action, struct device *dev) +{ + int ret; + + ret = 0; + mutex_lock(&item->dev_item_mutex); + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + pr_info("%s: BUS_NOTIFY_ADD_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + + ret = dovmgr_add_dev_item(item, dev); + if (ret != 0) + goto out_unlock; + + break; + + case BUS_NOTIFY_DEL_DEVICE: + pr_info("%s: BUS_NOTIFY_DEL_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + break; + + case BUS_NOTIFY_REMOVED_DEVICE: + pr_info("%s: BUS_NOTIFY_REMOVE_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + + ret = dovmgr_remove_dev_item(item, dev); + if (ret != 0) + goto out_unlock; + + break; + } + +out_unlock: + mutex_unlock(&item->dev_item_mutex); + + return ret; +} + +#if IS_ENABLED(CONFIG_PCI) +static int dovmgr_pci_add_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (!item->enable || !dovmgr_pci_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_ADD_DEVICE, dev); +} + +static int dovmgr_pci_removed_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (item->enable || !dovmgr_pci_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_REMOVED_DEVICE, dev); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static int dovmgr_usb_add_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (item->enable || !dovmgr_usb_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_ADD_DEVICE, dev); +} + +static int dovmgr_usb_removed_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (!item->enable || !dovmgr_usb_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_REMOVED_DEVICE, dev); +} +#endif + +static int dovmgr_item_set_enable(struct dovmgr_item *item, bool new_enable) +{ + int ret; + + if (new_enable == item->enable) + return 0; + + item->enable = new_enable; + switch (item->type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + ret = bus_for_each_dev(&pci_bus_type, NULL, item, + new_enable ? dovmgr_pci_add_iterator : + dovmgr_pci_removed_iterator); + if (ret != 0) + return ret; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + ret = bus_for_each_dev(&usb_bus_type, NULL, item, + new_enable ? dovmgr_usb_add_iterator : + dovmgr_usb_removed_iterator); + if (ret != 0) + return ret; + break; +#endif + default: + break; + } + return 0; +} + + +static ssize_t dovmgr_item_str_show(struct dovmgr_item *item, + char *page, char **strp) +{ + return snprintf(page, PAGE_SIZE, "%s\n", + *strp ? *strp : ""); +} + +static ssize_t dovmgr_item_str_store(struct dovmgr_item *item, + const char *page, size_t count, char **strp) +{ + const char *s; + int len; + + /* copy to path buffer (and make sure it's always zero terminated */ + len = strnlen(page, PAGE_SIZE); + if (len >= PAGE_SIZE) + return -EINVAL; + s = page + len; + while (len > 0 && *--s == '\n') + len--; + if (len == 0) + return -EINVAL; + + if (*strp) + kfree(*strp); + *strp = kmalloc(len + 1, GFP_KERNEL); + if (!*strp) + return -ENOMEM; + memcpy(*strp, page, len); + (*strp)[len + 1] = '\0'; + + return count; +} + +static ssize_t dovmgr_item_path_show(struct config_item *citem, char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return dovmgr_item_str_show(item, page, &item->path); +} + +static ssize_t dovmgr_item_path_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return dovmgr_item_str_store(item, page, count, &item->path); +} + +static ssize_t dovmgr_item_enable_show(struct config_item *citem, char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "%u\n", !!item->enable); +} + +static ssize_t dovmgr_item_enable_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + + ret = dovmgr_item_set_enable(item, !!val); + if (ret != 0) + return ret; + + return count; +} + +static ssize_t dovmgr_item_overlay_show(struct config_item *citem, char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + ssize_t ret; + + mutex_lock(&item->dev_item_mutex); + ret = snprintf(page, PAGE_SIZE, "%s\n", item->overlay_name ? + item->overlay_name : ""); + mutex_unlock(&item->dev_item_mutex); + return ret; +}; + + +static ssize_t dovmgr_item_overlay_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + ssize_t ret; + + mutex_lock(&item->dev_item_mutex); + kfree(item->overlay_name); + item->overlay_name = kstrndup(page, PAGE_SIZE, GFP_KERNEL); + if (!item->overlay_name) + ret = -ENOMEM; + else + ret = count; + mutex_unlock(&item->dev_item_mutex); + return ret; +} + +static ssize_t dovmgr_item_status_show(struct config_item *citem, char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + struct dovmgr_dev_item *ditem; + char *p, *e; + int len; + + p = page; + e = page + PAGE_SIZE; + + mutex_lock(&item->dev_item_mutex); + list_for_each_entry(ditem, &item->dev_item_list, node) { + len = snprintf(p, e - p, "%s:%s:%d\n", + kobject_name(&ditem->dev->kobj), + of_node_full_name(ditem->dev->of_node), + ditem->overlay_id); + p += len; + if (p >= e - 1) + break; + } + mutex_unlock(&item->dev_item_mutex); + + return p - page; +} + +CONFIGFS_ATTR(dovmgr_item_, path); +CONFIGFS_ATTR_RO(dovmgr_item_, status); +CONFIGFS_ATTR(dovmgr_item_, enable); +CONFIGFS_ATTR(dovmgr_item_, overlay); + +#if IS_ENABLED(CONFIG_PCI) +static ssize_t dovmgr_item_pci_device_show(struct config_item *citem, + char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.device); +} + +static ssize_t dovmgr_item_pci_device_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.device = val; + return count; +} + +static ssize_t dovmgr_item_pci_vendor_show(struct config_item *citem, + char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.vendor); +} + +static ssize_t dovmgr_item_pci_vendor_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.vendor = val; + return count; +} + +static ssize_t dovmgr_item_pci_subdevice_show(struct config_item *citem, + char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "0x%08x\n", item->pci.subdevice); +} + +static ssize_t dovmgr_item_pci_subdevice_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.subdevice = val; + return count; +} + +static ssize_t dovmgr_item_pci_subvendor_show(struct config_item *citem, + char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "0x%08x\n", item->pci.subvendor); +} + +static ssize_t dovmgr_item_pci_subvendor_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.subvendor = val; + return count; +} + +static ssize_t dovmgr_item_pci_class_show(struct config_item *citem, char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.class); +} + +static ssize_t dovmgr_item_pci_class_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.class = val; + return count; +} + +static ssize_t dovmgr_item_pci_class_mask_show(struct config_item *citem, + char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.class_mask); +} + +static ssize_t dovmgr_item_pci_class_mask_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.class_mask = val; + return count; +} + +CONFIGFS_ATTR(dovmgr_item_pci_, device); +CONFIGFS_ATTR(dovmgr_item_pci_, vendor); +CONFIGFS_ATTR(dovmgr_item_pci_, subdevice); +CONFIGFS_ATTR(dovmgr_item_pci_, subvendor); +CONFIGFS_ATTR(dovmgr_item_pci_, class); +CONFIGFS_ATTR(dovmgr_item_pci_, class_mask); +#endif + +#if IS_ENABLED(CONFIG_USB) +static ssize_t dovmgr_item_usb_idProduct_show(struct config_item *citem, + char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "0x%04x\n", + item->usb.idProduct); +} + +static ssize_t dovmgr_item_usb_idProduct_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->usb.idProduct = val; + return count; +} + +static ssize_t dovmgr_item_usb_idVendor_show(struct config_item *citem, + char *page) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + return snprintf(page, PAGE_SIZE, "0x%04x\n", + item->usb.idVendor); +} + +static ssize_t dovmgr_item_usb_idVendor_store(struct config_item *citem, + const char *page, size_t count) +{ + struct dovmgr_item *item = to_dovmgr_item(citem); + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->usb.idVendor = val; + return count; +} + +CONFIGFS_ATTR(dovmgr_item_usb_, idProduct); +CONFIGFS_ATTR(dovmgr_item_usb_, idVendor); +#endif + +#if IS_ENABLED(CONFIG_PCI) +static struct configfs_attribute *dovmgr_pci_attrs[] = { + &dovmgr_item_attr_path, + &dovmgr_item_attr_status, + &dovmgr_item_attr_enable, + &dovmgr_item_attr_overlay, + &dovmgr_item_pci_attr_device, + &dovmgr_item_pci_attr_vendor, + &dovmgr_item_pci_attr_subdevice, + &dovmgr_item_pci_attr_subvendor, + &dovmgr_item_pci_attr_class, + &dovmgr_item_pci_attr_class_mask, + NULL, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct configfs_attribute *dovmgr_usb_attrs[] = { + &dovmgr_item_attr_path, + &dovmgr_item_attr_enable, + &dovmgr_item_attr_status, + &dovmgr_item_attr_overlay, + &dovmgr_item_usb_attr_idVendor, + &dovmgr_item_usb_attr_idProduct, + NULL, +}; +#endif + +static void dovmgr_release(struct config_item *cfsitem) +{ + struct dovmgr_item *item = to_dovmgr_item(cfsitem); + + /* disable item (this removes the overlay and all) */ + dovmgr_item_set_enable(item, false); + + kfree(item->path); + kfree(item); +} + +static struct configfs_item_operations dovmgr_item_ops = { + .release = dovmgr_release, +}; + +#if IS_ENABLED(CONFIG_PCI) +static struct config_item_type dovmgr_pci_item_type = { + .ct_item_ops = &dovmgr_item_ops, + .ct_attrs = dovmgr_pci_attrs, + .ct_owner = THIS_MODULE, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct config_item_type dovmgr_usb_item_type = { + .ct_item_ops = &dovmgr_item_ops, + .ct_attrs = dovmgr_usb_attrs, + .ct_owner = THIS_MODULE, +}; +#endif + +static struct config_item *dovmgr_group_make_item( + struct config_group *group, const char *name, + enum dovmgr_type type) +{ + struct dovmgr_item *item; + struct config_item_type *item_type; + + switch (type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + item_type = &dovmgr_pci_item_type; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + item_type = &dovmgr_usb_item_type; + break; +#endif + default: + return ERR_PTR(-EINVAL); + }; + + item = kzalloc(sizeof(*item), GFP_KERNEL); + if (!item) + return ERR_PTR(-ENOMEM); + + item->type = type; + item->enable = false; + mutex_init(&item->dev_item_mutex); + INIT_LIST_HEAD(&item->dev_item_list); + + switch (type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + /* default for matching device/vendor */ + item->pci.vendor = PCI_ANY_ID; + item->pci.device = PCI_ANY_ID; + item->pci.subvendor = PCI_ANY_ID; + item->pci.subdevice = PCI_ANY_ID; + item->pci.class = 0; + item->pci.class_mask = 0; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + /* default */ + item->usb.match_flags = USB_DEVICE_ID_MATCH_DEVICE; + break; +#endif + default: + return ERR_PTR(-EINVAL); + }; + + config_item_init_type_name(&item->item, name, item_type); + return &item->item; +} + +#if IS_ENABLED(CONFIG_PCI) +static struct config_item *dovmgr_group_pci_make_item( + struct config_group *group, const char *name) +{ + return dovmgr_group_make_item(group, name, ITEM_PCI); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct config_item *dovmgr_group_usb_make_item( + struct config_group *group, const char *name) +{ + return dovmgr_group_make_item(group, name, ITEM_USB); +} +#endif + +static void dovmgr_group_drop_item(struct config_group *group, + struct config_item *cfsitem) +{ + struct dovmgr_item *item = to_dovmgr_item(cfsitem); + + switch (item->type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + break; +#endif + default: + break; + } + config_item_put(&item->item); +} + +#if IS_ENABLED(CONFIG_PCI) +static struct configfs_group_operations dovmgr_pci_group_ops = { + .make_item = dovmgr_group_pci_make_item, + .drop_item = dovmgr_group_drop_item, +}; + +static struct config_item_type dovmgr_pci_type = { + .ct_group_ops = &dovmgr_pci_group_ops, + .ct_owner = THIS_MODULE, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct configfs_group_operations dovmgr_usb_group_ops = { + .make_item = dovmgr_group_usb_make_item, + .drop_item = dovmgr_group_drop_item, +}; + +static struct config_item_type dovmgr_usb_type = { + .ct_group_ops = &dovmgr_usb_group_ops, + .ct_owner = THIS_MODULE, +}; +#endif + +static struct configfs_group_operations dovmgr_ops = { + /* empty - we don't allow anything to be created */ +}; + +static struct config_item_type dovmgr_type = { + .ct_group_ops = &dovmgr_ops, + .ct_owner = THIS_MODULE, +}; + +struct config_group *dovmgr_def_groups[] = { +#if IS_ENABLED(CONFIG_PCI) + &dovmgr_pci_group, +#endif +#if IS_ENABLED(CONFIG_USB) + &dovmgr_usb_group, +#endif + NULL +}; + +static struct configfs_subsystem dovmgr_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "dovmgr", + .ci_type = &dovmgr_type, + }, + .default_groups = dovmgr_def_groups, + }, + .su_mutex = __MUTEX_INITIALIZER(dovmgr_subsys.su_mutex), +}; + +#if IS_ENABLED(CONFIG_PCI) +static int pci_dev_instantiate(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *bus_dev; + struct of_changeset cset; + struct device_node *np, *npb; + int ret; + + npb = NULL; + + /* already instantiated */ + if (dev->of_node) { + pr_debug("%s: dev=%s of_node=%s\n", __func__, + kobject_name(&dev->kobj), + of_node_full_name(dev->of_node)); + return 0; + } + + bus_dev = &pdev->bus->dev; + + pr_debug("%s: %s: %02x:%02x.%02x - node %s%s\n", __func__, + kobject_name(&dev->kobj), + pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + bus_dev->of_node ? of_node_full_name(bus_dev->of_node) : "", + pci_is_bridge(pdev) ? " bridge" : ""); + + /* to create the node, the bus must be present */ + if (!bus_dev->of_node) { + pr_err("%s: No node for %s because no bus device node\n", + __func__, kobject_name(&dev->kobj)); + return 0; + } + + of_changeset_init(&cset); + + np = of_changeset_create_device_node(&cset, bus_dev->of_node, + "%s/pci-%04x-%02x-%02x.%d", + of_node_full_name(bus_dev->of_node), + pci_domain_nr(pdev->bus), pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + if (IS_ERR(np)) { + ret = PTR_ERR(np); + goto out_cset_fail; + } + + ret = of_changeset_add_property_stringf(&cset, np, "compatible", + "pciclass,%04x", (pdev->class >> 8) & 0xffffff); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_u32(&cset, np, "vendor", + pdev->vendor); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_u32(&cset, np, "device", + pdev->device); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, np, "status", "okay"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_bool(&cset, np, "auto-generated"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_attach_node(&cset, np); + if (ret != 0) + goto out_cset_fail; + + /* are we creating a bridge; swell */ + npb = NULL; + if (pci_is_bridge(pdev) && !pdev->subordinate->dev.of_node) { + + pr_debug("%s: %s: bus->dev=%s subordinate=%s\n", __func__, + kobject_name(&dev->kobj), + kobject_name(&pdev->bus->dev.kobj), + kobject_name(&pdev->subordinate->dev.kobj)); + + npb = of_changeset_create_device_node(&cset, bus_dev->of_node, + "%s/pci-%04x-%02x", + of_node_full_name(bus_dev->of_node), + pci_domain_nr(pdev->subordinate), + pdev->subordinate->number); + if (IS_ERR(npb)) { + ret = PTR_ERR(npb); + goto out_cset_fail; + } + + ret = of_changeset_add_property_string(&cset, npb, "compatible", "generic,pci-bus"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, npb, "device_type", "pci"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, npb, "status", "okay"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_bool(&cset, npb, "auto-generated"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_attach_node(&cset, npb); + if (ret != 0) + goto out_cset_fail; + } + + ret = __of_changeset_apply(&cset); + if (ret != 0) + goto out_cset_fail; + + /* permanently commit */ + of_changeset_destroy(&cset); + + /* bind the node to the device */ + dev->of_node = np; + ret = sysfs_create_link(&dev->kobj, &dev->of_node->kobj, + "of_node"); + if (ret) + pr_warn("%s: %s Error %d creating of_node link\n", + __func__, kobject_name(&dev->kobj), ret); + + if (npb) { + pdev->subordinate->dev.of_node = npb; + ret = sysfs_create_link(&pdev->subordinate->dev.kobj, &npb->kobj, + "of_node"); + if (ret) + pr_warn("%s: %s Error %d creating of_node link\n", + __func__, kobject_name(&dev->kobj), ret); + } + + + return 0; + +out_cset_fail: + pr_err("%s: %s Failed to apply changeset (err=%d)\n", __func__, + kobject_name(&dev->kobj), ret); + of_changeset_destroy(&cset); + return ret; +} + +static int pci_dev_uninstantiate(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np, *npb; + struct of_changeset cset; + int ret; + + /* device node must exist */ + np = dev->of_node; + if (!np) + return 0; + + /* and the auto-generated property */ + if (!of_property_read_bool(np, "auto-generated")) + return 0; + + of_changeset_init(&cset); + + ret = of_changeset_detach_node(&cset, np); + if (ret != 0) + goto out_cset_fail; + + npb = NULL; + if (pci_is_bridge(pdev)) + npb = pdev->subordinate->dev.of_node; + + if (npb != NULL) { + ret = of_changeset_detach_node(&cset, npb); + if (ret != 0) + goto out_cset_fail; + } + + ret = __of_changeset_apply(&cset); + if (ret != 0) + goto out_cset_fail; + + dev->of_node = NULL; + if (npb != NULL) + pdev->subordinate->dev.of_node = NULL; + + pr_debug("%s: %s: %02x:%02x.%02x\n", __func__, + kobject_name(&dev->kobj), + pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + /* TODO iterate over the properties and free */ + + return 0; + +out_cset_fail: + of_changeset_destroy(&cset); + + return ret; +} + +static int dovmgr_pci_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + int ret; + + if (action == BUS_NOTIFY_ADD_DEVICE) + pci_dev_instantiate(to_pci_dev(arg)); + + ret = dovmgr_notifier_action(&dovmgr_pci_group, action, arg, + dovmgr_pci_item_match, dovmgr_item_notify); + + if (action == BUS_NOTIFY_REMOVED_DEVICE) + pci_dev_uninstantiate(to_pci_dev(arg)); + + return ret; +} + +static struct notifier_block dovmgr_pci_notifier = { + .notifier_call = dovmgr_pci_notify, +}; + +static int pci_instantiate_iterator(struct device *dev, void *data) +{ + return pci_dev_instantiate(to_pci_dev(dev)); +} + +static int dovmgr_pci_init(void) +{ + int ret; + + config_group_init_type_name(&dovmgr_pci_group, "pci", &dovmgr_pci_type); + ret = bus_register_notifier(&pci_bus_type, &dovmgr_pci_notifier); + if (ret != 0) { + pr_err("%s: bus_register_notifier() failed\n", __func__); + return ret; + } + + ret = bus_for_each_dev(&pci_bus_type, NULL, NULL, + pci_instantiate_iterator); + if (ret != 0) { + pr_err("%s: bus_for_each_dev() failed\n", __func__); + return ret; + } + + return 0; +} + +static void dovmgr_pci_cleanup(void) +{ + bus_unregister_notifier(&pci_bus_type, &dovmgr_pci_notifier); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static int dovmgr_usb_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + return dovmgr_notifier_action(&dovmgr_usb_group, action, arg, + dovmgr_usb_item_match, dovmgr_item_notify); +} + +static struct notifier_block dovmgr_usb_notifier = { + .notifier_call = dovmgr_usb_notify, +}; + +static int dovmgr_usb_init(void) +{ + int ret; + + config_group_init_type_name(&dovmgr_usb_group, "usb", &dovmgr_usb_type); + ret = bus_register_notifier(&usb_bus_type, &dovmgr_usb_notifier); + if (ret != 0) { + pr_err("%s: bus_register_notifier() failed\n", __func__); + return ret; + } + return 0; +} + +static void dovmgr_usb_cleanup(void) +{ + bus_unregister_notifier(&usb_bus_type, &dovmgr_usb_notifier); +} +#endif + +static int __init dovmgr_init(void) +{ + int ret; + + config_group_init(&dovmgr_subsys.su_group); + +#if IS_ENABLED(CONFIG_PCI) + ret = dovmgr_pci_init(); + if (ret != 0) + goto err_no_pci_init; +#endif +#if IS_ENABLED(CONFIG_USB) + ret = dovmgr_usb_init(); + if (ret != 0) + goto err_no_usb_init; +#endif + + ret = configfs_register_subsystem(&dovmgr_subsys); + if (ret != 0) { + pr_err("%s: failed to register subsys\n", __func__); + goto err_no_configfs; + } + pr_info("%s: OK\n", __func__); + return 0; + +err_no_configfs: +#if IS_ENABLED(CONFIG_USB) + dovmgr_usb_cleanup(); +err_no_usb_init: +#endif +#if IS_ENABLED(CONFIG_PCI) + dovmgr_pci_cleanup(); +err_no_pci_init: +#endif + return ret; +} +late_initcall(dovmgr_init); diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 04f2e1f..cfc493c 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -3,6 +3,8 @@ menu "EEPROM support" config EEPROM_AT24 tristate "I2C EEPROMs / RAMs / ROMs from most vendors" depends on I2C && SYSFS + select REGMAP + select NVMEM help Enable this driver to get read/write support to most I2C EEPROMs and compatible devices like FRAMs, SRAMs, ROMs etc. After you @@ -30,6 +32,8 @@ config EEPROM_AT24 config EEPROM_AT25 tristate "SPI EEPROMs from most vendors" depends on SPI && SYSFS + select REGMAP + select NVMEM help Enable this driver to get read/write support to most SPI EEPROMs, after you configure the board init code to know about each eeprom @@ -74,6 +78,8 @@ config EEPROM_93CX6 config EEPROM_93XX46 tristate "Microwire EEPROM 93XX46 support" depends on SPI && SYSFS + select REGMAP + select NVMEM help Driver for the microwire EEPROM chipsets 93xx46x. The driver supports both read and write commands and also the command to diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 5d7c090..089d694 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -23,6 +22,8 @@ #include #include #include +#include +#include #include /* @@ -55,7 +56,6 @@ struct at24_data { struct at24_platform_data chip; - struct memory_accessor macc; int use_smbus; int use_smbus_write; @@ -64,12 +64,15 @@ struct at24_data { * but not from changes by other I2C masters. */ struct mutex lock; - struct bin_attribute bin; u8 *writebuf; unsigned write_max; unsigned num_addresses; + struct regmap_config regmap_config; + struct nvmem_config nvmem_config; + struct nvmem_device *nvmem; + /* * Some chips tie up multiple I2C addresses; dummy devices reserve * them for us, and we'll use them with SMBus calls. @@ -283,17 +286,6 @@ static ssize_t at24_read(struct at24_data *at24, return retval; } -static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - return at24_read(at24, buf, off, count); -} - - /* * Note that if the hardware write-protect pin is pulled high, the whole * chip is normally write protected. But there are plenty of product @@ -414,40 +406,49 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, return retval; } -static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - return at24_write(at24, buf, off, count); -} - /*-------------------------------------------------------------------------*/ /* - * This lets other kernel code access the eeprom data. For example, it - * might hold a board's Ethernet address, or board-specific calibration - * data generated on the manufacturing floor. - */ - -static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf, - off_t offset, size_t count) + * Provide a regmap interface, which is registered with the NVMEM + * framework +*/ +static int at24_regmap_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) { - struct at24_data *at24 = container_of(macc, struct at24_data, macc); + struct at24_data *at24 = context; + off_t offset = *(u32 *)reg; + int err; - return at24_read(at24, buf, offset, count); + err = at24_read(at24, val, offset, val_size); + if (err) + return err; + return 0; } -static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf, - off_t offset, size_t count) +static int at24_regmap_write(void *context, const void *data, size_t count) { - struct at24_data *at24 = container_of(macc, struct at24_data, macc); + struct at24_data *at24 = context; + const char *buf; + u32 offset; + size_t len; + int err; - return at24_write(at24, buf, offset, count); + memcpy(&offset, data, sizeof(offset)); + buf = (const char *)data + sizeof(offset); + len = count - sizeof(offset); + + err = at24_write(at24, buf, offset, len); + if (err) + return err; + return 0; } +static const struct regmap_bus at24_regmap_bus = { + .read = at24_regmap_read, + .write = at24_regmap_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + /*-------------------------------------------------------------------------*/ #ifdef CONFIG_OF @@ -481,6 +482,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) struct at24_data *at24; int err; unsigned i, num_addresses; + struct regmap *regmap; if (client->dev.platform_data) { chip = *(struct at24_platform_data *)client->dev.platform_data; @@ -573,29 +575,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->chip = chip; at24->num_addresses = num_addresses; - /* - * Export the EEPROM bytes through sysfs, since that's convenient. - * By default, only root should see the data (maybe passwords etc) - */ - sysfs_bin_attr_init(&at24->bin); - at24->bin.attr.name = "eeprom"; - at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; - at24->bin.read = at24_bin_read; - at24->bin.size = chip.byte_len; - - at24->macc.read = at24_macc_read; - writable = !(chip.flags & AT24_FLAG_READONLY); if (writable) { if (!use_smbus || use_smbus_write) { unsigned write_max = chip.page_size; - at24->macc.write = at24_macc_write; - - at24->bin.write = at24_bin_write; - at24->bin.attr.mode |= S_IWUSR; - if (write_max > io_limit) write_max = io_limit; if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) @@ -627,14 +612,38 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } } - err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); - if (err) + at24->regmap_config.reg_bits = 32; + at24->regmap_config.val_bits = 8; + at24->regmap_config.reg_stride = 1; + at24->regmap_config.max_register = chip.byte_len - 1; + + regmap = devm_regmap_init(&client->dev, &at24_regmap_bus, at24, + &at24->regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "regmap init failed\n"); + err = PTR_ERR(regmap); + goto err_clients; + } + + at24->nvmem_config.name = dev_name(&client->dev); + at24->nvmem_config.dev = &client->dev; + at24->nvmem_config.read_only = !writable; + at24->nvmem_config.root_only = true; + at24->nvmem_config.owner = THIS_MODULE; + at24->nvmem_config.compat = true; + at24->nvmem_config.base_dev = &client->dev; + + at24->nvmem = nvmem_register(&at24->nvmem_config); + + if (IS_ERR(at24->nvmem)) { + err = PTR_ERR(at24->nvmem); goto err_clients; + } i2c_set_clientdata(client, at24); - dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n", - at24->bin.size, client->name, + dev_info(&client->dev, "%u byte %s EEPROM, %s, %u bytes/write\n", + chip.byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); if (use_smbus == I2C_SMBUS_WORD_DATA || use_smbus == I2C_SMBUS_BYTE_DATA) { @@ -645,7 +654,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) /* export data to kernel code */ if (chip.setup) - chip.setup(&at24->macc, chip.context); + chip.setup(at24->nvmem, chip.context); return 0; @@ -663,7 +672,8 @@ static int at24_remove(struct i2c_client *client) int i; at24 = i2c_get_clientdata(client); - sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); + + nvmem_unregister(at24->nvmem); for (i = 1; i < at24->num_addresses; i++) i2c_unregister_device(at24->client[i]); diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index f850ef5..fa36a6e 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -16,6 +16,8 @@ #include #include +#include +#include #include #include #include @@ -29,11 +31,12 @@ struct at25_data { struct spi_device *spi; - struct memory_accessor mem; struct mutex lock; struct spi_eeprom chip; - struct bin_attribute bin; unsigned addrlen; + struct regmap_config regmap_config; + struct nvmem_config nvmem_config; + struct nvmem_device *nvmem; }; #define AT25_WREN 0x06 /* latch the write enable */ @@ -77,10 +80,10 @@ at25_ee_read( struct spi_message m; u8 instr; - if (unlikely(offset >= at25->bin.size)) + if (unlikely(offset >= at25->chip.byte_len)) return 0; - if ((offset + count) > at25->bin.size) - count = at25->bin.size - offset; + if ((offset + count) > at25->chip.byte_len) + count = at25->chip.byte_len - offset; if (unlikely(!count)) return count; @@ -131,21 +134,19 @@ at25_ee_read( return status ? status : count; } -static ssize_t -at25_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static int at25_regmap_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) { - struct device *dev; - struct at25_data *at25; + struct at25_data *at25 = context; + off_t offset = *(u32 *)reg; + int err; - dev = container_of(kobj, struct device, kobj); - at25 = dev_get_drvdata(dev); - - return at25_ee_read(at25, buf, off, count); + err = at25_ee_read(at25, val, offset, val_size); + if (err) + return err; + return 0; } - static ssize_t at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, size_t count) @@ -155,10 +156,10 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, unsigned buf_size; u8 *bounce; - if (unlikely(off >= at25->bin.size)) + if (unlikely(off >= at25->chip.byte_len)) return -EFBIG; - if ((off + count) > at25->bin.size) - count = at25->bin.size - off; + if ((off + count) > at25->chip.byte_len) + count = at25->chip.byte_len - off; if (unlikely(!count)) return count; @@ -265,39 +266,29 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, return written ? written : status; } -static ssize_t -at25_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static int at25_regmap_write(void *context, const void *data, size_t count) { - struct device *dev; - struct at25_data *at25; - - dev = container_of(kobj, struct device, kobj); - at25 = dev_get_drvdata(dev); - - return at25_ee_write(at25, buf, off, count); -} + struct at25_data *at25 = context; + const char *buf; + u32 offset; + size_t len; + int err; -/*-------------------------------------------------------------------------*/ - -/* Let in-kernel code access the eeprom data. */ - -static ssize_t at25_mem_read(struct memory_accessor *mem, char *buf, - off_t offset, size_t count) -{ - struct at25_data *at25 = container_of(mem, struct at25_data, mem); + memcpy(&offset, data, sizeof(offset)); + buf = (const char *)data + sizeof(offset); + len = count - sizeof(offset); - return at25_ee_read(at25, buf, offset, count); + err = at25_ee_write(at25, buf, offset, len); + if (err) + return err; + return 0; } -static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf, - off_t offset, size_t count) -{ - struct at25_data *at25 = container_of(mem, struct at25_data, mem); - - return at25_ee_write(at25, buf, offset, count); -} +static const struct regmap_bus at25_regmap_bus = { + .read = at25_regmap_read, + .write = at25_regmap_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; /*-------------------------------------------------------------------------*/ @@ -358,6 +349,7 @@ static int at25_probe(struct spi_device *spi) { struct at25_data *at25 = NULL; struct spi_eeprom chip; + struct regmap *regmap; int err; int sr; int addrlen; @@ -402,40 +394,35 @@ static int at25_probe(struct spi_device *spi) spi_set_drvdata(spi, at25); at25->addrlen = addrlen; - /* Export the EEPROM bytes through sysfs, since that's convenient. - * And maybe to other kernel code; it might hold a board's Ethernet - * address, or board-specific calibration data generated on the - * manufacturing floor. - * - * Default to root-only access to the data; EEPROMs often hold data - * that's sensitive for read and/or write, like ethernet addresses, - * security codes, board-specific manufacturing calibrations, etc. - */ - sysfs_bin_attr_init(&at25->bin); - at25->bin.attr.name = "eeprom"; - at25->bin.attr.mode = S_IRUSR; - at25->bin.read = at25_bin_read; - at25->mem.read = at25_mem_read; - - at25->bin.size = at25->chip.byte_len; - if (!(chip.flags & EE_READONLY)) { - at25->bin.write = at25_bin_write; - at25->bin.attr.mode |= S_IWUSR; - at25->mem.write = at25_mem_write; - } + at25->regmap_config.reg_bits = 32; + at25->regmap_config.val_bits = 8; + at25->regmap_config.reg_stride = 1; + at25->regmap_config.max_register = chip.byte_len - 1; - err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin); - if (err) - return err; - - if (chip.setup) - chip.setup(&at25->mem, chip.context); + regmap = devm_regmap_init(&spi->dev, &at25_regmap_bus, at25, + &at25->regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } - dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n", - (at25->bin.size < 1024) - ? at25->bin.size - : (at25->bin.size / 1024), - (at25->bin.size < 1024) ? "Byte" : "KByte", + at25->nvmem_config.name = dev_name(&spi->dev); + at25->nvmem_config.dev = &spi->dev; + at25->nvmem_config.read_only = chip.flags & EE_READONLY; + at25->nvmem_config.root_only = true; + at25->nvmem_config.owner = THIS_MODULE; + at25->nvmem_config.compat = true; + at25->nvmem_config.base_dev = &spi->dev; + + at25->nvmem = nvmem_register(&at25->nvmem_config); + if (IS_ERR(at25->nvmem)) + return PTR_ERR(at25->nvmem); + + dev_info(&spi->dev, "%d %s %s eeprom%s, pagesize %u\n", + (chip.byte_len < 1024) + ? chip.byte_len + : (chip.byte_len / 1024), + (chip.byte_len < 1024) ? "Byte" : "KByte", at25->chip.name, (chip.flags & EE_READONLY) ? " (readonly)" : "", at25->chip.page_size); @@ -447,7 +434,8 @@ static int at25_remove(struct spi_device *spi) struct at25_data *at25; at25 = spi_get_drvdata(spi); - sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin); + nvmem_unregister(at25->nvmem); + return 0; } diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c index 7342fd6..3d1d551 100644 --- a/drivers/misc/eeprom/eeprom.c +++ b/drivers/misc/eeprom/eeprom.c @@ -84,7 +84,7 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { - struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct i2c_client *client = to_i2c_client(kobj_to_dev(kobj)); struct eeprom_data *data = i2c_get_clientdata(client); u8 slice; diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c index ff63f05..426fe2f 100644 --- a/drivers/misc/eeprom/eeprom_93xx46.c +++ b/drivers/misc/eeprom/eeprom_93xx46.c @@ -10,12 +10,17 @@ #include #include +#include #include #include #include +#include +#include +#include #include #include -#include +#include +#include #include #define OP_START 0x4 @@ -25,73 +30,111 @@ #define ADDR_ERAL 0x20 #define ADDR_EWEN 0x30 +struct eeprom_93xx46_devtype_data { + unsigned int quirks; +}; + +static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = { + .quirks = EEPROM_93XX46_QUIRK_SINGLE_WORD_READ | + EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH, +}; + struct eeprom_93xx46_dev { struct spi_device *spi; struct eeprom_93xx46_platform_data *pdata; - struct bin_attribute bin; struct mutex lock; + struct regmap_config regmap_config; + struct nvmem_config nvmem_config; + struct nvmem_device *nvmem; int addrlen; + int size; }; +static inline bool has_quirk_single_word_read(struct eeprom_93xx46_dev *edev) +{ + return edev->pdata->quirks & EEPROM_93XX46_QUIRK_SINGLE_WORD_READ; +} + +static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev) +{ + return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH; +} + static ssize_t -eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +eeprom_93xx46_read(struct eeprom_93xx46_dev *edev, char *buf, + unsigned off, size_t count) { - struct eeprom_93xx46_dev *edev; - struct device *dev; - struct spi_message m; - struct spi_transfer t[2]; - int bits, ret; - u16 cmd_addr; + ssize_t ret = 0; - dev = container_of(kobj, struct device, kobj); - edev = dev_get_drvdata(dev); + if (unlikely(off >= edev->size)) + return 0; + if ((off + count) > edev->size) + count = edev->size - off; + if (unlikely(!count)) + return count; - cmd_addr = OP_READ << edev->addrlen; + mutex_lock(&edev->lock); - if (edev->addrlen == 7) { - cmd_addr |= off & 0x7f; - bits = 10; - } else { - cmd_addr |= off & 0x3f; - bits = 9; - } + if (edev->pdata->prepare) + edev->pdata->prepare(edev); - dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n", - cmd_addr, edev->spi->max_speed_hz); + while (count) { + struct spi_message m; + struct spi_transfer t[2] = { { 0 } }; + u16 cmd_addr = OP_READ << edev->addrlen; + size_t nbytes = count; + int bits; + int err; + + if (edev->addrlen == 7) { + cmd_addr |= off & 0x7f; + bits = 10; + if (has_quirk_single_word_read(edev)) + nbytes = 1; + } else { + cmd_addr |= (off >> 1) & 0x3f; + bits = 9; + if (has_quirk_single_word_read(edev)) + nbytes = 2; + } - spi_message_init(&m); - memset(t, 0, sizeof(t)); + dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n", + cmd_addr, edev->spi->max_speed_hz); - t[0].tx_buf = (char *)&cmd_addr; - t[0].len = 2; - t[0].bits_per_word = bits; - spi_message_add_tail(&t[0], &m); + spi_message_init(&m); - t[1].rx_buf = buf; - t[1].len = count; - t[1].bits_per_word = 8; - spi_message_add_tail(&t[1], &m); + t[0].tx_buf = (char *)&cmd_addr; + t[0].len = 2; + t[0].bits_per_word = bits; + spi_message_add_tail(&t[0], &m); - mutex_lock(&edev->lock); + t[1].rx_buf = buf; + t[1].len = count; + t[1].bits_per_word = 8; + spi_message_add_tail(&t[1], &m); - if (edev->pdata->prepare) - edev->pdata->prepare(edev); + err = spi_sync(edev->spi, &m); + /* have to wait at least Tcsl ns */ + ndelay(250); - ret = spi_sync(edev->spi, &m); - /* have to wait at least Tcsl ns */ - ndelay(250); - if (ret) { - dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n", - count, (int)off, ret); + if (err) { + dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n", + nbytes, (int)off, err); + ret = err; + break; + } + + buf += nbytes; + off += nbytes; + count -= nbytes; + ret += nbytes; } if (edev->pdata->finish) edev->pdata->finish(edev); mutex_unlock(&edev->lock); - return ret ? : count; + return ret; } static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on) @@ -110,7 +153,13 @@ static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on) bits = 9; } - dev_dbg(&edev->spi->dev, "ew cmd 0x%04x\n", cmd_addr); + if (has_quirk_instruction_length(edev)) { + cmd_addr <<= 2; + bits += 2; + } + + dev_dbg(&edev->spi->dev, "ew%s cmd 0x%04x, %d bits\n", + is_on ? "en" : "ds", cmd_addr, bits); spi_message_init(&m); memset(&t, 0, sizeof(t)); @@ -155,7 +204,7 @@ eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev, bits = 10; data_len = 1; } else { - cmd_addr |= off & 0x3f; + cmd_addr |= (off >> 1) & 0x3f; bits = 9; data_len = 2; } @@ -182,16 +231,17 @@ eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev, } static ssize_t -eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +eeprom_93xx46_write(struct eeprom_93xx46_dev *edev, const char *buf, + loff_t off, size_t count) { - struct eeprom_93xx46_dev *edev; - struct device *dev; int i, ret, step = 1; - dev = container_of(kobj, struct device, kobj); - edev = dev_get_drvdata(dev); + if (unlikely(off >= edev->size)) + return -EFBIG; + if ((off + count) > edev->size) + count = edev->size - off; + if (unlikely(!count)) + return count; /* only write even number of bytes on 16-bit devices */ if (edev->addrlen == 6) { @@ -228,6 +278,49 @@ eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj, return ret ? : count; } +/* + * Provide a regmap interface, which is registered with the NVMEM + * framework +*/ +static int eeprom_93xx46_regmap_read(void *context, const void *reg, + size_t reg_size, void *val, + size_t val_size) +{ + struct eeprom_93xx46_dev *eeprom_93xx46 = context; + off_t offset = *(u32 *)reg; + int err; + + err = eeprom_93xx46_read(eeprom_93xx46, val, offset, val_size); + if (err) + return err; + return 0; +} + +static int eeprom_93xx46_regmap_write(void *context, const void *data, + size_t count) +{ + struct eeprom_93xx46_dev *eeprom_93xx46 = context; + const char *buf; + u32 offset; + size_t len; + int err; + + memcpy(&offset, data, sizeof(offset)); + buf = (const char *)data + sizeof(offset); + len = count - sizeof(offset); + + err = eeprom_93xx46_write(eeprom_93xx46, buf, offset, len); + if (err) + return err; + return 0; +} + +static const struct regmap_bus eeprom_93xx46_regmap_bus = { + .read = eeprom_93xx46_regmap_read, + .write = eeprom_93xx46_regmap_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev) { struct eeprom_93xx46_platform_data *pd = edev->pdata; @@ -245,6 +338,13 @@ static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev) bits = 9; } + if (has_quirk_instruction_length(edev)) { + cmd_addr <<= 2; + bits += 2; + } + + dev_dbg(&edev->spi->dev, "eral cmd 0x%04x, %d bits\n", cmd_addr, bits); + spi_message_init(&m); memset(&t, 0, sizeof(t)); @@ -294,12 +394,101 @@ static ssize_t eeprom_93xx46_store_erase(struct device *dev, } static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase); +static void select_assert(void *context) +{ + struct eeprom_93xx46_dev *edev = context; + + gpiod_set_value_cansleep(edev->pdata->select, 1); +} + +static void select_deassert(void *context) +{ + struct eeprom_93xx46_dev *edev = context; + + gpiod_set_value_cansleep(edev->pdata->select, 0); +} + +static const struct of_device_id eeprom_93xx46_of_table[] = { + { .compatible = "eeprom-93xx46", }, + { .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, }, + {} +}; +MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); + +static int eeprom_93xx46_probe_dt(struct spi_device *spi) +{ + const struct of_device_id *of_id = + of_match_device(eeprom_93xx46_of_table, &spi->dev); + struct device_node *np = spi->dev.of_node; + struct eeprom_93xx46_platform_data *pd; + u32 tmp; + int gpio; + enum of_gpio_flags of_flags; + int ret; + + pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + + ret = of_property_read_u32(np, "data-size", &tmp); + if (ret < 0) { + dev_err(&spi->dev, "data-size property not found\n"); + return ret; + } + + if (tmp == 8) { + pd->flags |= EE_ADDR8; + } else if (tmp == 16) { + pd->flags |= EE_ADDR16; + } else { + dev_err(&spi->dev, "invalid data-size (%d)\n", tmp); + return -EINVAL; + } + + if (of_property_read_bool(np, "read-only")) + pd->flags |= EE_READONLY; + + gpio = of_get_named_gpio_flags(np, "select-gpios", 0, &of_flags); + if (gpio_is_valid(gpio)) { + unsigned long flags = + of_flags == OF_GPIO_ACTIVE_LOW ? GPIOF_ACTIVE_LOW : 0; + + ret = devm_gpio_request_one(&spi->dev, gpio, flags, + "eeprom_93xx46_select"); + if (ret) + return ret; + + pd->select = gpio_to_desc(gpio); + pd->prepare = select_assert; + pd->finish = select_deassert; + + gpiod_direction_output(pd->select, 0); + } + + if (of_id->data) { + const struct eeprom_93xx46_devtype_data *data = of_id->data; + + pd->quirks = data->quirks; + } + + spi->dev.platform_data = pd; + + return 0; +} + static int eeprom_93xx46_probe(struct spi_device *spi) { struct eeprom_93xx46_platform_data *pd; struct eeprom_93xx46_dev *edev; + struct regmap *regmap; int err; + if (spi->dev.of_node) { + err = eeprom_93xx46_probe_dt(spi); + if (err < 0) + return err; + } + pd = spi->dev.platform_data; if (!pd) { dev_err(&spi->dev, "missing platform data\n"); @@ -325,19 +514,34 @@ static int eeprom_93xx46_probe(struct spi_device *spi) edev->spi = spi_dev_get(spi); edev->pdata = pd; - sysfs_bin_attr_init(&edev->bin); - edev->bin.attr.name = "eeprom"; - edev->bin.attr.mode = S_IRUSR; - edev->bin.read = eeprom_93xx46_bin_read; - edev->bin.size = 128; - if (!(pd->flags & EE_READONLY)) { - edev->bin.write = eeprom_93xx46_bin_write; - edev->bin.attr.mode |= S_IWUSR; + edev->size = 128; + + edev->regmap_config.reg_bits = 32; + edev->regmap_config.val_bits = 8; + edev->regmap_config.reg_stride = 1; + edev->regmap_config.max_register = edev->size - 1; + + regmap = devm_regmap_init(&spi->dev, &eeprom_93xx46_regmap_bus, edev, + &edev->regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "regmap init failed\n"); + err = PTR_ERR(regmap); + goto fail; } - err = sysfs_create_bin_file(&spi->dev.kobj, &edev->bin); - if (err) + edev->nvmem_config.name = dev_name(&spi->dev); + edev->nvmem_config.dev = &spi->dev; + edev->nvmem_config.read_only = pd->flags & EE_READONLY; + edev->nvmem_config.root_only = true; + edev->nvmem_config.owner = THIS_MODULE; + edev->nvmem_config.compat = true; + edev->nvmem_config.base_dev = &spi->dev; + + edev->nvmem = nvmem_register(&edev->nvmem_config); + if (IS_ERR(edev->nvmem)) { + err = PTR_ERR(edev->nvmem); goto fail; + } dev_info(&spi->dev, "%d-bit eeprom %s\n", (pd->flags & EE_ADDR8) ? 8 : 16, @@ -359,10 +563,11 @@ static int eeprom_93xx46_remove(struct spi_device *spi) { struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi); + nvmem_unregister(edev->nvmem); + if (!(edev->pdata->flags & EE_READONLY)) device_remove_file(&spi->dev, &dev_attr_erase); - sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin); kfree(edev); return 0; } @@ -370,6 +575,7 @@ static int eeprom_93xx46_remove(struct spi_device *spi) static struct spi_driver eeprom_93xx46_driver = { .driver = { .name = "93xx46", + .of_match_table = of_match_ptr(eeprom_93xx46_of_table), }, .probe = eeprom_93xx46_probe, .remove = eeprom_93xx46_remove, diff --git b/drivers/misc/tieqep.c b/drivers/misc/tieqep.c new file mode 100644 index 0000000..a0652f9 --- /dev/null +++ b/drivers/misc/tieqep.c @@ -0,0 +1,766 @@ +/* + * TI eQEP driver for AM33xx devices + * + * Copyright (C) 2013 Nathaniel R. Lewis - http://teknoman117.wordpress.com/ + * Copyright (C) 2015 SoftPLC Corporation, Dick Hollenbeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * sysfs entries + * - position = absolute - current position; relative - last latched value + * - mode => 0 - absolute; 1 - relative + * - period => sampling period for the hardware + * - enable => 0 - eQEP disabled, 1 - eQEP enabled + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Include the PWMSS subsystem headers, because this unit controls + * whether our clock source is enabled, and if eQEP is to be + * enabled, we need to start the clock + */ +#include "../pwm/pwm-tipwmss.h" + + +/* eQEP register offsets from its base IO address */ +#define QPOSCNT 0x0000 +#define QPOSINIT 0x0004 +#define QPOSMAX 0x0008 +#define QPOSCMP 0x000C +#define QPOSILAT 0x0010 +#define QPOSSLAT 0x0014 +#define QPOSLAT 0x0018 +#define QUTMR 0x001C +#define QUPRD 0x0020 +#define QWDTMR 0x0024 +#define QWDPRD 0x0026 +#define QDECCTL 0x0028 +#define QEPCTL 0x002A +#define QCAPCTL 0x002C +#define QPOSCTL 0x002E +#define QEINT 0x0030 +#define QFLG 0x0032 +#define QCLR 0x0034 +#define QFRC 0x0036 +#define QEPSTS 0x0038 +#define QCTMR 0x003A +#define QCPRD 0x003C +#define QCTMRLAT 0x003E +#define QCPRDLAT 0x0040 +#define QREVID 0x005C + +#if 0 /* if you wanted another way to modify IP registers... */ +typedef volatile u32 REG32; +typedef volatile u16 REG16; +struct EQEP_REGS { + REG32 q_poscnt; /* 0x00 position counter */ + REG32 q_posinit; /* 0x04 position counter initialization */ + REG32 q_posmax; /* 0x08 maximum position count */ + REG32 q_poscmp; /* 0x0C position compare */ + REG32 q_posilat; /* 0x10 index position latch */ + REG32 q_posslat; /* 0x14 strobe position latch */ + REG32 q_poslat; /* 0x18 position counter latch */ + REG32 q_utmr; /* 0x1C unit timer */ + REG32 q_uprd; /* 0x20 unit period */ + REG16 q_wdtmr; /* 0x24 watchdog timer */ + REG16 q_wdprd; /* 0x26 watchdog period */ + REG16 q_decctl; /* 0x28 decoder control */ + REG16 q_epctl; /* 0x2A control register */ + REG16 q_capctl; /* 0x2C capture control */ + REG16 q_posctl; /* 0x2E position compare control */ + REG16 q_eint; /* 0x30 interrupt enable */ + REG16 q_flg; /* 0x32 interrupt flag */ + REG16 q_clr; /* 0x34 interrupt clear */ + REG16 q_frc; /* 0x36 interrupt force */ + REG16 q_epsts; /* 0x38 status */ + REG16 q_ctmr; /* 0x3A capture timer */ + REG16 q_cprd; /* 0x3C capture period */ + REG16 q_ctmrlat; /* 0x3E capture timer latch */ + REG16 q_prdlat; /* 0x40 capture period latch */ + char q_fill1[0x5c-0x40]; + REG32 q_revid; /* 0x5C revision id */ +}; +#endif + + +/* Bits for the QDECTL register */ +#define QSRC1 (1 << 15) +#define QSRC0 (1 << 14) +#define SOEN (1 << 13) +#define SPSEL (1 << 12) +#define XCR (1 << 11) +#define SWAP (1 << 10) +#define IGATE (1 << 9) +#define QAP (1 << 8) +#define QBP (1 << 7) +#define QIP (1 << 6) +#define QSP (1 << 5) + +/* Bits for the QEPCTL register */ +#define FREESOFT1 (1 << 15) +#define FREESOFT0 (1 << 14) +#define PCRM1 (1 << 13) +#define PCRM0 (1 << 12) +#define SEI1 (1 << 11) +#define SEI0 (1 << 10) +#define IEI1 (1 << 9) +#define IEI0 (1 << 8) +#define SWI (1 << 7) +#define SEL (1 << 6) +#define IEL1 (1 << 5) +#define IEL0 (1 << 4) +#define PHEN (1 << 3) +#define QCLM (1 << 2) +#define UTE (1 << 1) +#define WDE (1 << 0) + +/* Bits for the QCAPCTL register */ +#define CEN (1 << 15) +#define CCPS2 (1 << 6) +#define CCPS0 (1 << 5) +#define CCPS1 (1 << 4) +#define UPPS3 (1 << 3) +#define UPPS2 (1 << 2) +#define UPPS1 (1 << 1) +#define UPPS0 (1 << 0) + +/* Bits for the QPOSCTL register */ +#define PCSHDW (1 << 15) +#define PCLOAD (1 << 14) +#define PCPOL (1 << 13) +#define PCE (1 << 12) +#define PCSPW11 (1 << 11) +#define PCSPW10 (1 << 10) +#define PCSPW9 (1 << 9) +#define PCSPW8 (1 << 8) +#define PCSPW7 (1 << 7) +#define PCSPW6 (1 << 6) +#define PCSPW5 (1 << 5) +#define PCSPW4 (1 << 4) +#define PCSPW3 (1 << 3) +#define PCSPW2 (1 << 2) +#define PCSPW1 (1 << 1) +#define PCSPW0 (1 << 0) + +/* Bits for the interrupt registers */ +#define EQEP_INTERRUPT_MASK 0x0FFF +#define UTOF (1 << 11) + +/* Bits to control the clock in the PWMSS subsystem */ +#define PWMSS_EQEPCLK_EN BIT(4) +#define PWMSS_EQEPCLK_STOP_REQ BIT(5) +#define PWMSS_EQEPCLK_EN_ACK BIT(4) + +/* + * Modes for the eQEP unit + * Absolute - the position entry represents the current position of the encoder. + * Poll this value and it will be notified every period nanoseconds + * Relative - the position entry represents the last latched position of the encoder + * This value is latched every period nanoseconds and the internal counter + * is subsequenty reset + */ +#define TIEQEP_MODE_ABSOLUTE 0 +#define TIEQEP_MODE_RELATIVE 1 + +/* Structure defining the characteristics of the eQEP unit */ +struct eqep_chip +{ + /* Platform device for this eQEP unit */ + struct platform_device *pdev; + + /* Pointer to the base of the memory of the eQEP unit */ + void __iomem *mmio_base; + + /* SYSCLKOUT to the eQEP unit */ + u32 clk_rate; + + /* IRQ for the eQEP unit */ + u16 irq; + + /* Mode of the eQEP unit */ + u8 op_mode; + + /* work stuct for the notify userspace work */ + struct work_struct notify_work; + + /* Backup for driver suspension */ + u16 prior_qepctl; + u16 prior_qeint; +}; + +/* Notify userspace work */ +static void notify_handler(struct work_struct *work) +{ + /* Get a reference to the eQEP driver */ + struct eqep_chip *eqep = container_of(work, struct eqep_chip, notify_work); + + /* Notify the userspace */ + sysfs_notify(&eqep->pdev->dev.kobj, NULL, "position"); +} + +/* eQEP Interrupt handler */ +static irqreturn_t eqep_irq_handler(int irq, void *dev_id) +{ + /* Get the instance information */ + struct platform_device *pdev = dev_id; + struct eqep_chip *eqep = platform_get_drvdata(pdev); + + /* Get the interrupt flags */ + u16 iflags = readw(eqep->mmio_base + QFLG) & EQEP_INTERRUPT_MASK; + + /* Check the interrupt source(s) */ + if (iflags & UTOF) { + /* Handle the unit timer overflow interrupt by notifying any potential pollers */ + schedule_work(&eqep->notify_work); + } + + /* Clear interrupt flags (write back triggered flags to the clear register) */ + writew(iflags, eqep->mmio_base + QCLR); + + /* Return that the IRQ was handled successfully */ + return IRQ_HANDLED; +} + +/* Function to read whether the eQEP unit is enabled or disabled */ +static ssize_t eqep_get_enabled(struct device *dev, struct device_attribute *attr, char *buf) +{ + /* Get the instance structure */ + struct eqep_chip *eqep = dev_get_drvdata(dev); + + /* Read the qep control register and mask all but the enabled bit */ + u16 enabled = readw(eqep->mmio_base + QEPCTL) & PHEN; + + /* Return the target in string format */ + return sprintf(buf, "%u\n", (enabled) ? 1 : 0); +} + +/* Function to set if the eQEP is enabled */ +static ssize_t eqep_set_enabled(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + /* Get the instance structure */ + int rc; + u16 val; + u8 enabled; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + /* Convert the input string to an 8 bit uint */ + if ((rc = kstrtou8(buf, 0, &enabled))) + return rc; + + /* Get the existing state of QEPCTL */ + val = readw(eqep->mmio_base + QEPCTL); + + /* If we passed a number that is not 0, enable the eQEP */ + if (enabled) + /* Enable the eQEP (Set PHEN in QEPCTL) */ + val |= PHEN; + else + /* Disable the eQEP (Clear PHEN in QEPCTL) */ + val &= ~PHEN; + + /* Write flags back to control register */ + writew(val, eqep->mmio_base + QEPCTL); + + /* Return buffer length consumed (all) */ + return count; +} + +/* Function to read the current position of the eQEP */ +static ssize_t eqep_get_position(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct eqep_chip *eqep = dev_get_drvdata(dev); + + s32 position = 0; + + if (eqep->op_mode == TIEQEP_MODE_ABSOLUTE) { + position = readl(eqep->mmio_base + QPOSCNT); + } else if (eqep->op_mode == TIEQEP_MODE_RELATIVE) { + /* in relative mode, use the last latched value of the eQEP hardware */ + position = readl(eqep->mmio_base + QPOSLAT); + dev_dbg(dev, "get_position:0x%08x\n", position); + } + + return sprintf(buf, "%d\n", position); +} + +/* Function to set the position of the eQEP hardware */ +static ssize_t eqep_set_position(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + s32 position; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + if ((rc = kstrtos32(buf, 0, &position))) + return rc; + + /* + * If we are in absolute mode, set the position of the encoder, + * discard relative mode because thats pointless + */ + if (eqep->op_mode == TIEQEP_MODE_ABSOLUTE) { + /* If absolute mode, set the current value of the eQEP hardware */ + writel(position, eqep->mmio_base + QPOSCNT); + } + + /* Return buffer length consumed (all) */ + return count; +} + +/* Function to read the period of the unit time event timer */ +static ssize_t eqep_get_timer_period(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct eqep_chip *eqep = dev_get_drvdata(dev); + u64 period; + + /* Convert from counts per interrupt back into period_ns */ + period = readl(eqep->mmio_base + QUPRD); + period = period * NSEC_PER_SEC; + do_div(period, eqep->clk_rate); + + /* Otherwise write out the data */ + return sprintf(buf, "%llu\n", period); +} + +/* Function to set the unit timer period. 0 = off, greater than zero sets the period */ +static ssize_t eqep_set_timer_period(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + u16 tmp; + u64 period; + + struct eqep_chip *eqep = dev_get_drvdata(dev); + + if ((rc = kstrtou64(buf, 0, &period))) + return rc; + + /* Disable the unit timer before modifying its period register */ + tmp = readw(eqep->mmio_base + QEPCTL); + tmp &= ~(UTE | QCLM); + writew(tmp, eqep->mmio_base + QEPCTL); + + /* Zero the unit timer counter register */ + writel(0, eqep->mmio_base + QUTMR); + + /* If the timer is enabled (a non-zero period has been passed) */ + if (period) { + /* update the period */ + period = period * eqep->clk_rate; + do_div(period, NSEC_PER_SEC); + + dev_dbg(dev, "eqep_set_timer_period:%llu\n", period); + + writel(period, eqep->mmio_base + QUPRD); + + /* Enable unit timer, and latch QPOSLAT to QPOSCNT on timer expiration */ + tmp |= UTE | QCLM; + writew(tmp, eqep->mmio_base + QEPCTL); + } + + return count; +} + +/* Function to read the mode of the eQEP hardware */ +static ssize_t eqep_get_mode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct eqep_chip *eqep = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", eqep->op_mode); +} + +/* Function to set the mode of the eQEP hardware */ +static ssize_t eqep_set_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + u16 val; + u8 tmp_mode; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + if ((rc = kstrtou8(buf, 0, &tmp_mode))) + return rc; + + dev_dbg(dev, "eqep_set_mode:%d\n", tmp_mode); + + val = readw(eqep->mmio_base + QEPCTL); + + if (tmp_mode == TIEQEP_MODE_ABSOLUTE) { + /* + * In absolute mode, don't reset the hardware based on time, + * so disable the unit timer position reset (Set PCRM[1:0] = 0) + */ + val &= ~(PCRM1 | PCRM0); + + eqep->op_mode = TIEQEP_MODE_ABSOLUTE; + } else if (tmp_mode == TIEQEP_MODE_RELATIVE) { + /* + * In relative mode, latch the value of the eQEP hardware on the + * overflow of the unit timer. So enable the unit timer position reset + * (Set PCRM[1:0] = 3) + */ + val |= PCRM1 | PCRM0; + + eqep->op_mode = TIEQEP_MODE_RELATIVE; + } + + writew(val, eqep->mmio_base + QEPCTL); + + return count; +} + +/* Bind read/write functions to sysfs entries */ +static DEVICE_ATTR(enabled, 0644, eqep_get_enabled, eqep_set_enabled); +static DEVICE_ATTR(position, 0644, eqep_get_position, eqep_set_position); +static DEVICE_ATTR(period, 0644, eqep_get_timer_period, eqep_set_timer_period); +static DEVICE_ATTR(mode, 0644, eqep_get_mode, eqep_set_mode); + +/* Array holding all of the sysfs entries */ +static const struct attribute *eqep_attrs[] = { + &dev_attr_enabled.attr, + &dev_attr_position.attr, + &dev_attr_period.attr, + &dev_attr_mode.attr, + NULL, +}; + +/* Driver function group */ +static const struct attribute_group eqep_device_attr_group = { + .attrs = (struct attribute **) eqep_attrs, +}; + +/* Driver compatibility list */ +static struct of_device_id eqep_of_match[] = +{ + { .compatible = "ti,am33xx-eqep" }, + { } +}; + +/* Register our compatibilities for device trees */ +MODULE_DEVICE_TABLE(of, eqep_of_match); + +/* Create an instance of the eQEP driver */ +static int eqep_probe(struct platform_device *pdev) +{ + struct resource *r; + struct clk *clk; + struct eqep_chip *eqep; + struct pinctrl *pinctrl; + + int ret; + u64 period; + u16 status; + u32 value; + + dev_info(&pdev->dev, "ver. 1.0\n"); + + /* Select pins provided through the device tree */ + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + { + dev_warn(&pdev->dev, "unable to select pin group\n"); + } + + /* Allocate a eqep_driver object */ + eqep = devm_kzalloc(&pdev->dev, sizeof(struct eqep_chip), GFP_KERNEL); + if (!eqep) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + /* Get a handle to the system clock object */ + clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + /* Get the frequency of the system clock */ + eqep->clk_rate = clk_get_rate(clk); + if (!eqep->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + /* Get a resource containing the IRQ for this eQEP controller */ + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!r)) { + dev_err(&pdev->dev, "Invalid IRQ resource\n"); + return -ENODEV; + } + + /* Store the irq */ + eqep->irq = r->start; + + /* Get a resource containing the requested (from DT) memory address and range of eQEP controller */ + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + /* Remap the eQEP controller memory into our own memory space */ + eqep->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(eqep->mmio_base)) + return PTR_ERR(eqep->mmio_base); + + /* Store the platform device in our eQEP data structure for later usage */ + eqep->pdev = pdev; + + /* Subscribe to the eQEP interrupt */ + if (request_irq(eqep->irq, eqep_irq_handler, IRQF_IRQPOLL, "eqep_interrupt", pdev)) + { + dev_err(&pdev->dev, "unable to request irq for eQEP\n"); + return -ENODEV; + } + + /* Register controls to sysfs */ + if (sysfs_create_group(&pdev->dev.kobj, &eqep_device_attr_group)) + { + dev_err(&pdev->dev, "sysfs creation failed\n"); + return -EINVAL; + } + + /* set QDECCTL */ + status = 0; /* default to Quadrature count mode, QSRC1 & QSRC0 = 0 */ + + /* set QSRC1 & QSRC0 bits, one of 4 count_modes. */ + if (!of_property_read_u32(pdev->dev.of_node, "count_mode", &value) && value <= 3) { + status |= value << 14; + + /* + * in count up or count down mode, count on rising edge only + * not on both edges. + */ + if (value >= 2) + status |= XCR; + } + dev_dbg(&pdev->dev, "count_mode:%d\n", value); + + /* Should we invert the qa input */ + if (!of_property_read_u32(pdev->dev.of_node, "invert_qa", &value)) + status = value ? status | QAP : status & ~QAP; + dev_dbg(&pdev->dev, "invert_qa:%d\n", value); + + /* Should we invert the qb input */ + if (!of_property_read_u32(pdev->dev.of_node, "invert_qb", &value)) + status = value ? status | QBP : status & ~QBP; + dev_dbg(&pdev->dev, "invert_qb:%d\n", value); + + /* Should we invert the index input */ + if (!of_property_read_u32(pdev->dev.of_node, "invert_qi", &value)) + status = value ? status | QIP : status & ~QIP; + dev_dbg(&pdev->dev, "invert_qi:%d\n", value); + + /* Should we invert the strobe input */ + if (!of_property_read_u32(pdev->dev.of_node, "invert_qs", &value)) + status = value ? status | QSP : status & ~QSP; + dev_dbg(&pdev->dev, "invert_qs:%d\n", value); + + /* Should we swap the cha and chb inputs */ + if (!of_property_read_u32(pdev->dev.of_node, "swap_inputs", &value)) + status = value ? status | SWAP : status & ~SWAP; + dev_dbg(&pdev->dev, "swap_inputs:%d\n", value); + + dev_dbg(&pdev->dev, "QDECCTL:0x%04x\n", status); + + /* Write the decoder control settings back to the control register */ + writew(status, eqep->mmio_base + QDECCTL); + + writel( 0, eqep->mmio_base + QPOSINIT); + writel(~0, eqep->mmio_base + QPOSMAX); + writel( 0, eqep->mmio_base + QPOSCNT); + + dev_dbg(&pdev->dev, "QPOSINIT:0x%08x\n", readl(eqep->mmio_base + QPOSINIT)); + dev_dbg(&pdev->dev, "QPOSMAX:0x%08x\n", readl(eqep->mmio_base + QPOSMAX)); + dev_dbg(&pdev->dev, "QPOSCNT:0x%08x\n", readl(eqep->mmio_base + QPOSCNT)); + + status = UTOF; /* Enable Unit Time Period interrupt. */ + if (!of_property_read_u32(pdev->dev.of_node, "omit_interrupt", &value) && value) { + status = 0; /* no interrupt */ + } + writew(status, eqep->mmio_base + QEINT); + dev_dbg(&pdev->dev, "omit_interrupt:%d\n", value); + dev_dbg(&pdev->dev, "QEINT:0x%04x\n", status); + + /* Calculate the timer ticks per second */ + period = 1000000000; + period = period * eqep->clk_rate; + do_div(period, NSEC_PER_SEC); + + /* Set this period into the unit timer period register */ + writel(period, eqep->mmio_base + QUPRD); + dev_dbg(&pdev->dev, "QUPRD:0x%08x\n", (u32) period); + + /* + * Enable the eQEP with basic position counting turned on + * PHEN - Quadrature position counter enable bit + * UTE - unit timer enable + * QCLM - latch QPOSLAT to QPOSCNT upon unit timer overflow + * IEL0 - Latch QPOSILAT on index signal. Rising or falling, IEL[1:0] = 0 is reserved + * SWI - Software initialization of position count register, i.e. set QPOSCNT <= QPOSINIT, + * but this bit was not being reset by hardware as advertised in TRM, + * (so omit & clear QPOSCNT manually elsewhere?) + */ + status = PHEN | UTE | QCLM | IEL0 | SWI; + writew(status, eqep->mmio_base + QEPCTL); + dev_dbg(&pdev->dev, "QEPCTL:0x%04x write\n", status); + dev_dbg(&pdev->dev, "QEPCTL:0x%04x read\n", readw(eqep->mmio_base + QEPCTL)); + + /* We default to absolute mode */ + eqep->op_mode = TIEQEP_MODE_ABSOLUTE; + + /* Enable the power management runtime */ + pm_runtime_enable(&pdev->dev); + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(&pdev->dev); + + /* Enable the clock to the eQEP unit */ + status = pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EQEPCLK_EN); + + /* If we failed to enable the clocks, fail out */ + if (!(status & PWMSS_EQEPCLK_EN_ACK)) { + dev_err(&pdev->dev, "PWMSS config space clock enable failed\n"); + ret = -EINVAL; + goto pwmss_clk_failure; + } + + /* Initialize the notify work struture */ + INIT_WORK(&eqep->notify_work, notify_handler); + + /* Decrement the device usage count (twice) and run pm_runtime_idle() if zero */ + pm_runtime_put_sync(&pdev->dev); + + /* Set the platform driver data to the data object we've been creating for the eQEP unit */ + platform_set_drvdata(pdev, eqep); + + /* Success! */ + dev_dbg(&pdev->dev, "irq:%d, clk_rate:%u\n", eqep->irq, eqep->clk_rate); + return 0; + + /* If a failure occurred, stop the runtime power management */ +pwmss_clk_failure: + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return ret; +} + +/* Remove an instance of the eQEP driver */ +static int eqep_remove(struct platform_device *pdev) +{ + /* Get the eQEP driver data from the platform device structure */ + struct eqep_chip *eqep = platform_get_drvdata(pdev); + + /* Cancel work */ + cancel_work_sync(&eqep->notify_work); + + /* Unmap from sysfs */ + sysfs_remove_group(&pdev->dev.kobj, &eqep_device_attr_group); + + /* Release important assets */ + free_irq(eqep->irq, pdev); + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(&pdev->dev); + + /* Disable the eQEP clock */ + pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EQEPCLK_STOP_REQ); + + /* Decrement the device usage count (twice) and run pm_runtime_idle() if zero */ + pm_runtime_put_sync(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); + + /* Disable the runtime power management of this device */ + pm_runtime_disable(&pdev->dev); + + /* Return success */ + return 0; +} + +/* Power management suspend device */ +static int eqep_suspend(struct device *dev) +{ + /* Get the eqep driver information */ + struct eqep_chip *eqep = dev_get_drvdata(dev); + u16 tmp; + + /* Shut down interrupts */ + eqep->prior_qeint = readw(eqep->mmio_base + QEINT); + tmp = eqep->prior_qeint & ~UTOF; + writew(tmp, eqep->mmio_base + QEINT); + + /* Get the existing state of QEPCTL */ + eqep->prior_qepctl = readw(eqep->mmio_base + QEPCTL); + + /* Disable eQEP controller */ + writew(eqep->prior_qepctl & ~PHEN, eqep->mmio_base + QEPCTL); + + /* Decrement the device usage count and run pm_runtime_idle() if zero */ + pm_runtime_put_sync(dev); + + /* Return success */ + return 0; +} + +/* Power management wake device back up */ +static int eqep_resume(struct device *dev) +{ + /* Get the eqep driver information */ + struct eqep_chip *eqep = dev_get_drvdata(dev); + + /* Restore interrupt enabled register */ + writew(eqep->prior_qeint, eqep->mmio_base + QEINT); + + /* Restore prior qep control register */ + writew(eqep->prior_qepctl, eqep->mmio_base + QEPCTL); + + /* Increment the device usage count and run pm_runtime_resume() */ + pm_runtime_get_sync(dev); + + /* Success */ + return 0; +} + +/* create pm functions object */ +static SIMPLE_DEV_PM_OPS(eqep_pm_ops, eqep_suspend, eqep_resume); + +/* Platform driver information */ +static struct platform_driver eqep_driver = { + .driver = { + .name = "eqep", + .owner = THIS_MODULE, + .pm = &eqep_pm_ops, + .of_match_table = eqep_of_match, + }, + .probe = eqep_probe, + .remove = eqep_remove, +}; + +/* Register this platform driver */ +module_platform_driver(eqep_driver); + +/* Module information */ +MODULE_DESCRIPTION("TI eQEP driver"); +MODULE_AUTHOR("Nathaniel R. Lewis"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 4e7c9b9..c6ac38b 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -102,6 +102,10 @@ struct davinci_mdio_data { bool skip_scan; }; +#if IS_ENABLED(CONFIG_OF) +static void davinci_mdio_update_dt_from_phymask(u32 phy_mask); +#endif + static void __davinci_mdio_reset(struct davinci_mdio_data *data) { u32 mdio_in, div, mdio_out_khz, access_time; @@ -158,6 +162,12 @@ static int davinci_mdio_reset(struct mii_bus *bus) /* restrict mdio bus to live phys only */ dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); phy_mask = ~phy_mask; + + #if IS_ENABLED(CONFIG_OF) + if (of_machine_is_compatible("ti,am335x-bone")) + davinci_mdio_update_dt_from_phymask(phy_mask); + #endif + } else { /* desperately scan all phys */ dev_warn(data->dev, "no live phy, scanning all\n"); @@ -318,6 +328,93 @@ static int davinci_mdio_probe_dt(struct mdio_platform_data *data, return 0; } +static void davinci_mdio_update_dt_from_phymask(u32 phy_mask) +{ + int i, len, skip; + u32 addr; + __be32 *old_phy_p, *phy_id_p; + struct property *phy_id_property = NULL; + struct device_node *node_p, *slave_p; + + addr = 0; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if ((phy_mask & (1 << i)) == 0) { + addr = (u32) i; + break; + } + } + + for_each_compatible_node(node_p, NULL, "ti,cpsw") { + for_each_node_by_name(slave_p, "slave") { + +#if IS_ENABLED(CONFIG_OF_OVERLAY) + skip = 1; + // Hack, the overlay fixup "slave" doesn't have phy-mode... + old_phy_p = (__be32 *) of_get_property(slave_p, "phy-mode", &len); + + if (len != (sizeof(__be32 *) * 1)) + { + skip = 0; + } + + if (skip) { +#endif + + old_phy_p = (__be32 *) of_get_property(slave_p, "phy_id", &len); + + if (len != (sizeof(__be32 *) * 2)) + goto err_out; + + if (old_phy_p) { + + phy_id_property = kzalloc(sizeof(*phy_id_property), GFP_KERNEL); + + if (! phy_id_property) + goto err_out; + + phy_id_property->length = len; + phy_id_property->name = kstrdup("phy_id", GFP_KERNEL); + phy_id_property->value = kzalloc(len, GFP_KERNEL); + + if (! phy_id_property->name) + goto err_out; + + if (! phy_id_property->value) + goto err_out; + + memcpy(phy_id_property->value, old_phy_p, len); + + phy_id_p = (__be32 *) phy_id_property->value + 1; + + *phy_id_p = cpu_to_be32(addr); + + of_update_property(slave_p, phy_id_property); + pr_info("davinci_mdio: dt: updated phy_id[%d] from phy_mask[%x]\n", addr, phy_mask); + + ++addr; + } +#if IS_ENABLED(CONFIG_OF_OVERLAY) + } +#endif + } + } + + return; + +err_out: + + if (phy_id_property) { + if (phy_id_property->name) + kfree(phy_id_property->name); + + if (phy_id_property->value) + kfree(phy_id_property->value); + + if (phy_id_property) + kfree(phy_id_property); + } +} #endif static int davinci_mdio_probe(struct platform_device *pdev) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 9d11d98..8f42c37 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -38,8 +38,13 @@ struct nvmem_device { int users; size_t size; bool read_only; + int flags; + struct bin_attribute eeprom; + struct device *base_dev; }; +#define FLAG_COMPAT BIT(0) + struct nvmem_cell { const char *name; int offset; @@ -56,16 +61,26 @@ static DEFINE_IDA(nvmem_ida); static LIST_HEAD(nvmem_cells); static DEFINE_MUTEX(nvmem_cells_mutex); +#ifdef CONFIG_DEBUG_LOCK_ALLOC +static struct lock_class_key eeprom_lock_key; +#endif + #define to_nvmem_device(d) container_of(d, struct nvmem_device, dev) static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t pos, size_t count) { - struct device *dev = container_of(kobj, struct device, kobj); - struct nvmem_device *nvmem = to_nvmem_device(dev); + struct device *dev; + struct nvmem_device *nvmem; int rc; + if (attr->private) + dev = attr->private; + else + dev = container_of(kobj, struct device, kobj); + nvmem = to_nvmem_device(dev); + /* Stop the user from reading */ if (pos >= nvmem->size) return 0; @@ -90,10 +105,16 @@ static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t pos, size_t count) { - struct device *dev = container_of(kobj, struct device, kobj); - struct nvmem_device *nvmem = to_nvmem_device(dev); + struct device *dev; + struct nvmem_device *nvmem; int rc; + if (attr->private) + dev = attr->private; + else + dev = container_of(kobj, struct device, kobj); + nvmem = to_nvmem_device(dev); + /* Stop the user from writing */ if (pos >= nvmem->size) return 0; @@ -161,6 +182,53 @@ static const struct attribute_group *nvmem_ro_dev_groups[] = { NULL, }; +/* default read/write permissions, root only */ +static struct bin_attribute bin_attr_rw_root_nvmem = { + .attr = { + .name = "nvmem", + .mode = S_IWUSR | S_IRUSR, + }, +