diff --git a/.gitignore b/.gitignore index fd3a355..a36edcc 100644 --- a/.gitignore +++ b/.gitignore @@ -112,3 +112,7 @@ all.config # Kdevelop4 *.kdev4 + +# dtb objects +*.dtb +*.dtbo diff --git b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr new file mode 100644 index 0000000..e2df613 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr @@ -0,0 +1,63 @@ +What: /sys/devices/platform/bone_capemgr/slots +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: + READ: + Describe the state of all the slots of the beaglebone capemgr. + Each line of the output describes a slot: + The slot format is as following: + : [P-][F-][O-][l-][L-][D-] \ + ,, + , + + Where the flags are: + P: Slot has been probed + F: Slot has failed probing (i.e. no EEPROM detected) + O: Slot has been overridden by the user + l: Slot is current loading + L: Slot has completed loading and is ready + D: Slot has been disabled + + Example: + 0: P---L- -1 BeagleBone RS232 CAPE,00A1,Beagleboardtoys,BB-BONE-SERL-03 + 1: PF---- -1 + 2: PF---- -1 + 3: PF---- -1 + + WRITE: + Writing a string of the form [:version] issues a request to + load a firmware blob containing an overlay. The name of the firmware blob + is -[version|00A0].dtbo. This act is defined as a slot override. + + Writing a negative slot id removes the slot if it was an overridden one, or + unloads a slot that was probed. + +What: /sys/devices/platform/bone_capemgr/baseboard/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed base board EEPROM field; one of: + board-name - board-name as stored in cape EEPROM + dc-supplied - whether the cape draws or supplies DC + eeprom-format-revision - EEPROM format rev, only 00A0 supported + header - header; should be 'aa 55 33 ee' + manufacturer - manufacturer string + part-number - part-number of the cape + serial-number - serial number of the cape + version - version of the cape, i.e. 00A0 + number-of-pins - displayed but ignored + pin-usage - displayed but ignored + sys-5v - displayed but ignored + vdd-3v3exp - displayed but ignored + vdd-5v - displayed but ignored +What: /sys/devices/platform/bone_capemgr/slot-/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed cape's EEPROM field; the field is one of: + board-name - baseboard name i.e. A335BNLT + header - header; should be 'aa 55 33 ee' + revision - baseboard revision + serial-number - baseboard serial number + config-option - displayed but ignored diff --git b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays new file mode 100644 index 0000000..88d1549 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays @@ -0,0 +1,52 @@ +What: /sys/firmware/devicetree/overlays/ +Date: October 2015 +Contact: Pantelis Antoniou +Description: + This directory contains the applied device tree overlays of + the running system, as directories of the overlay id. + +What: /sys/firmware/devicetree/overlays/enable +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The master enable switch, by default is 1, and when + set to 0 it cannot be re-enabled for security reasons. + + The discussion about this switch takes place in: + http://comments.gmane.org/gmane.linux.drivers.devicetree/101871 + + Kees Cook: + "Coming from the perspective of drawing a bright line between + kernel and the root user (which tends to start with disabling + kernel module loading), I would say that there at least needs + to be a high-level one-way "off" switch for the interface so + that systems that have this interface can choose to turn it off + during initial boot, etc." + +What: /sys/firmware/devicetree/overlays/ +Date: October 2015 +Contact: Pantelis Antoniou +Description: + Each directory represents an applied overlay, containing + the following attribute files. + +What: /sys/firmware/devicetree/overlays//can_remove +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The attribute set to 1 means that the overlay can be removed, + while 0 means that the overlay is being overlapped therefore + removal is prohibited. + +What: /sys/firmware/devicetree/overlays/// +Date: October 2015 +Contact: Pantelis Antoniou +Description: + Each of these directories contain information about of the + particular overlay fragment. + +What: /sys/firmware/devicetree/overlays///target +Date: October 2015 +Contact: Pantelis Antoniou +Description: + The full-path of the target of the fragment diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 12af302..63555b9 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -24,6 +24,8 @@ Optional properties: - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init - ti,no-idle: When present, the module is never allowed to idle. +- ti,deassert-hard-reset: list of hwmod and hardware reset line name pairs + (ascii strings) to be deasserted upon device instantiation. Example: diff --git b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt new file mode 100644 index 0000000..ed5e0a7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt @@ -0,0 +1,54 @@ +Etnaviv DRM master device +========================= + +The Etnaviv DRM master device is a virtual device needed to list all +Vivante GPU cores that comprise the GPU subsystem. + +Required properties: +- compatible: Should be one of + "fsl,imx-gpu-subsystem" + "marvell,dove-gpu-subsystem" +- cores: Should contain a list of phandles pointing to Vivante GPU devices + +example: + +gpu-subsystem { + compatible = "fsl,imx-gpu-subsystem"; + cores = <&gpu_2d>, <&gpu_3d>; +}; + + +Vivante GPU core devices +======================== + +Required properties: +- compatible: Should be "vivante,gc" + A more specific compatible is not needed, as the cores contain chip + identification registers at fixed locations, which provide all the + necessary information to the driver. +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain the cores interrupt line +- clocks: should contain one clock for entry in clock-names + see Documentation/devicetree/bindings/clock/clock-bindings.txt +- clock-names: + - "bus": AXI/register clock + - "core": GPU core clock + - "shader": Shader clock (only required if GPU has feature PIPE_3D) + +Optional properties: +- power-domains: a power domain consumer specifier according to + Documentation/devicetree/bindings/power/power_domain.txt + +example: + +gpu_3d: gpu@00130000 { + compatible = "vivante,gc"; + reg = <0x00130000 0x4000>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, + <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>; + clock-names = "bus", "core", "shader"; + power-domains = <&gpc 1>; +}; diff --git b/Documentation/devicetree/bindings/misc/bone_capemgr.txt b/Documentation/devicetree/bindings/misc/bone_capemgr.txt new file mode 100644 index 0000000..7e4fbc9 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/bone_capemgr.txt @@ -0,0 +1,111 @@ +* Beaglebone cape manager driver + +Required properties: +- compatible: "ti,bone-capemgr" +- eeprom: phandle to the EEPROM baseboard. + The EEPROM framework interface is use to obtain the data. + +Required children nodes: + +- baseboardmaps: Contains nodes, which each of the them defines a mapping from + the baseboard EEPROM board-name ID to a DT friendly compatible + string. + + - board-name: The baseboard EEPROM board name, i.e. A335BONE for the + original beaglebone white. + - compatible-name: The DT friendly compatible string to be used for matching + compatible capes, i.e. "ti,beaglebone" + + + - nvmem-cells: Defines the phandles of the nvmem cells of the baseboard and the + slots. + - nvmem-cells: Defines the names of the nvmem cells. Required to have at + least a baseboard cell name. + + - #slots: Defines how many slots are there. + +- Example of a beaglebone cape-manager: + +bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cell = <&baseboard_data + &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; +}; + +The format of the cape to be loaded is in a standard overlay format with +the following root properties that are interpreted by the cape manager: + +Required properties: + - compatible: Should be compatible to the baseboard according to the + baseboard map value, i.e. "ti,beaglebone". + - part-numer: Should contain the part-number as stored in the EEPROM. + - version: Should contain a list of all the version that are supported + by the single cape dtbo, i.e. "00A1". + +Optional properties: + - exclusive-use: A string list which state the resources this cape requires. + No processing or matching to anything regarding the internal + kernel state is performed; it's purpose is to guard against + conflicts with other capes. + - priority: A priority to be assigned when loading a cape. A lower value + has higher priority. The purpose of the priority is to control + which cape is loaded first in case of a conflict. + +- Example of a serial cape: + +/dts-v1/; +/plugin/; +/ { + compatible = "ti,beaglebone", "ti,beaglebone-black"; + + /* identification */ + part-number = "BB-BONE-SERL-03"; + version = "00A1"; + + /* state the resources this cape uses */ + exclusive-use = + /* the pin header uses */ + "P9.21", /* uart2_txd */ + "P9.22", /* uart2_rxd */ + /* the hardware ip uses */ + "uart2"; + + fragment@0 { + target = <&am33xx_pinmux>; + __overlay__ { + bb_uart2_pins: pinmux_bb_uart2_pins { + pinctrl-single,pins = < + 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ + 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ + >; + }; + }; + }; + + fragment@1 { + target = <&uart2>; + __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&bb_uart2_pins>; + }; + }; +}; diff --git b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt new file mode 100644 index 0000000..e12f4e5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ti,iodelay-pinctrl.txt @@ -0,0 +1,86 @@ +Texas Instruments I/O Delay module configuration pinctrl definition + +Used in conjunction with Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt + +Required Properties: +- compatible: Should be: + "ti,dra7-iodelay" - I/O delay configuration for DRA7 +- reg - must be the register address range of IODelay module +- #address-cells = <1>; +- #size-cells = <0>; + +Important note: Use of "ti,dra7-iodelay" compatible definition need to be +carefully evaluated due to the expectation of glitch during configuration. + +Example: + +dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; +}; + +Configuration definition follows similar model as the pinctrl-single: +The groups of pin configuration are defined under "pinctrl-single,pins" + +&dra7_iodelay_core { + mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf { + pinctrl-single,pins = < + 0x18c (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A19_IN */ + 0x1a4 (A_DELAY(265) | G_DELAY(360)) /* CFG_GPMC_A20_IN */ + 0x1b0 (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A21_IN */ + 0x1bc (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A22_IN */ + 0x1c8 (A_DELAY(287) | G_DELAY(420)) /* CFG_GPMC_A23_IN */ + 0x1d4 (A_DELAY(144) | G_DELAY(240)) /* CFG_GPMC_A24_IN */ + 0x1e0 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_A25_IN */ + 0x1ec (A_DELAY(120) | G_DELAY(0)) /* CFG_GPMC_A26_IN */ + 0x1f8 (A_DELAY(120) | G_DELAY(180)) /* CFG_GPMC_A27_IN */ + 0x360 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_CS1_IN */ + >; + }; +}; + +Usage in conjunction with pinctrl single: + +For a complete description of the pins both the regular muxing as well as the +iodelay configuration is necessary. For example: + +&dra7_pmx_core { + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + 0x9c (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + 0xb0 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + 0xa0 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + 0xa4 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + 0xa8 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + 0xac (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + 0x8c (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + 0x90 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + 0x94 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + 0x98 (PIN_INPUT_PULLUP | MANUAL_MODE | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; + +&dra7_iodelay_core { + mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf { + pinctrl-single,pins = < + 0x18c (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A19_IN */ + 0x1a4 (A_DELAY(265) | G_DELAY(360)) /* CFG_GPMC_A20_IN */ + 0x1b0 (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A21_IN */ + 0x1bc (A_DELAY(0) | G_DELAY(120)) /* CFG_GPMC_A22_IN */ + 0x1c8 (A_DELAY(287) | G_DELAY(420)) /* CFG_GPMC_A23_IN */ + 0x1d4 (A_DELAY(144) | G_DELAY(240)) /* CFG_GPMC_A24_IN */ + 0x1e0 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_A25_IN */ + 0x1ec (A_DELAY(120) | G_DELAY(0)) /* CFG_GPMC_A26_IN */ + 0x1f8 (A_DELAY(120) | G_DELAY(180)) /* CFG_GPMC_A27_IN */ + 0x360 (A_DELAY(0) | G_DELAY(0)) /* CFG_GPMC_CS1_IN */ + >; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default &mmc2_iodelay_3v3_conf>; +}; diff --git b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt new file mode 100644 index 0000000..5befb53 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt @@ -0,0 +1,18 @@ +* OMAP PWM for dual-mode timers + +Required properties: +- compatible: Shall contain "ti,omap-dmtimer-pwm". +- ti,timers: phandle to PWM capable OMAP timer. See arm/omap/timer.txt for info + about these timers. +- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of + the cells format. + +Optional properties: +- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet + +Example: + pwm9: dmtimer-pwm@9 { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer9>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 91d5ab0..54a70ca 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -43,6 +43,9 @@ Optional properties: - auto-flow-control: one way to enable automatic flow control support. The driver is allowed to detect support for the capability even without this property. +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD + line respectively. It will use specified GPIO instead of the peripheral + function pin for the UART feature. If unsure, don't specify this property. Note: * fsl,ns16550: @@ -64,3 +67,19 @@ Example: interrupts = <10>; reg-shift = <2>; }; + +Example for OMAP UART using GPIO-based modem control signals: + + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git b/Documentation/devicetree/bindings/usb/generic-onboard-device.txt b/Documentation/devicetree/bindings/usb/generic-onboard-device.txt new file mode 100644 index 0000000..4dd7bca --- /dev/null +++ b/Documentation/devicetree/bindings/usb/generic-onboard-device.txt @@ -0,0 +1,31 @@ +Generic Onboard USB Device + +The node should be located at USB host controller's node or +any USB HUB's node. + +Required properties: +- compatible: should be "generic-onboard-device" + +Optional properties: +- clocks: the input clock for USB device. +- clock-frequency: the frequency for device's clock. +- reset-gpios: Should specify the GPIO for reset. +- reset-duration-us: the duration for assert reset signal, the time unit + is microsecond. + +Example: + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + hub: usb2415@01 { + compatible = "generic-onboard-device"; + reg = <0x01>; + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <10>; + }; +}; diff --git b/Documentation/devicetree/configfs-overlays.txt b/Documentation/devicetree/configfs-overlays.txt new file mode 100644 index 0000000..5fa43e0 --- /dev/null +++ b/Documentation/devicetree/configfs-overlays.txt @@ -0,0 +1,31 @@ +Howto use the configfs overlay interface. + +A device-tree configfs entry is created in /config/device-tree/overlays +and and it is manipulated using standard file system I/O. +Note that this is a debug level interface, for use by developers and +not necessarily something accessed by normal users due to the +security implications of having direct access to the kernel's device tree. + +* To create an overlay you mkdir the directory: + + # mkdir /config/device-tree/overlays/foo + +* Either you echo the overlay firmware file to the path property file. + + # echo foo.dtbo >/config/device-tree/overlays/foo/path + +* Or you cat the contents of the overlay to the dtbo file + + # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo + +The overlay file will be applied, and devices will be created/destroyed +as required. + +To remove it simply rmdir the directory. + + # rmdir /config/device-tree/overlays/foo + +The rationalle of the dual interface (firmware & direct copy) is that each is +better suited to different use patterns. The firmware interface is what's +intended to be used by hardware managers in the kernel, while the copy interface +make sense for developers (since it avoids problems with namespaces). diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index d418a6c..00ede57 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -100,6 +100,14 @@ Finally, if you need to remove all overlays in one-go, just call of_overlay_destroy_all() which will remove every single one in the correct order. +If your board has multiple slots/places where a single overlay can work +and each slot is defined by a node, you can use the of_overlay_create_indirect() +method to select the target. + +For overlays on probeable busses, use the of_overlay_create_target_root() method +in which you supply a device node as a target root, and which all target +references in the overlay are performed relative to that node. + Overlay DTS Format ------------------ @@ -113,6 +121,11 @@ The DTS of an overlay should have the following format: target=; /* phandle target of the overlay */ or target-path="/path"; /* target path of the overlay */ + or + target-indirect { /* indirect target selector */ + foo { target|target-path ... }; + bar { .... }; + }; __overlay__ { property-a; /* add property-a to the target */ @@ -131,3 +144,11 @@ Using the non-phandle based target method allows one to use a base DT which does not contain a __symbols__ node, i.e. it was not compiled with the -@ option. The __symbols__ node is only required for the target= method, since it contains the information required to map from a phandle to a tree location. + +The indirect target requires the use of a selector target on the call to +of_overlay_create_indirect(). I.e. passing the "foo" id will select the target +in the foo node, "bar" in bar node, etc. + +Note that when using the target root create method all target references must +lie under the target root node. I.e. the overlay is not allowed to 'break' out +of the root. diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index af68efd..e5fe521 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -51,15 +51,27 @@ configfs tree is always there, whether mounted on /config or not. An item is created via mkdir(2). The item's attributes will also appear at this time. readdir(3) can determine what the attributes are, read(2) can query their default values, and write(2) can store new -values. Like sysfs, attributes should be ASCII text files, preferably -with only one value per file. The same efficiency caveats from sysfs -apply. Don't mix more than one attribute in one attribute file. - -Like sysfs, configfs expects write(2) to store the entire buffer at -once. When writing to configfs attributes, userspace processes should -first read the entire file, modify the portions they wish to change, and -then write the entire buffer back. Attribute files have a maximum size -of one page (PAGE_SIZE, 4096 on i386). +values. Don't mix more than one attribute in one attribute file. + +There are two types of configfs attributes: + +* Normal attributes, which similar to sysfs attributes, are small ASCII text +files, with a maximum size of one page (PAGE_SIZE, 4096 on i386). Preferably +only one value per file should be used, and the same caveats from sysfs apply. +Configfs expects write(2) to store the entire buffer at once. When writing to +normal configfs attributes, userspace processes should first read the entire +file, modify the portions they wish to change, and then write the entire +buffer back. + +* Binary attributes, which are somewhat similar to sysfs binary attributes, +but with a few slight changes to semantics. The PAGE_SIZE limitation does not +apply, but the whole binary item must fit in single kernel vmalloc'ed buffer. +The write(2) calls from user space are buffered, and the attributes' +write_bin_attribute method will be invoked on the final close, therefore it is +imperative for user-space to check the return code of close(2) in order to +verify that the operation finished successfully. +To avoid a malicious user OOMing the kernel, there's a per-binary attribute +maximum buffer value. When an item needs to be destroyed, remove it with rmdir(2). An item cannot be destroyed if any other item has a link to it (via @@ -171,6 +183,7 @@ among other things. For that, it needs a type. struct configfs_item_operations *ct_item_ops; struct configfs_group_operations *ct_group_ops; struct configfs_attribute **ct_attrs; + struct configfs_bin_attribute **ct_bin_attrs; }; The most basic function of a config_item_type is to define what @@ -201,6 +214,32 @@ be called whenever userspace asks for a read(2) on the attribute. If an attribute is writable and provides a ->store method, that method will be be called whenever userspace asks for a write(2) on the attribute. +[struct configfs_bin_attribute] + + struct configfs_attribute { + struct configfs_attribute cb_attr; + void *cb_private; + size_t cb_max_size; + }; + +The binary attribute is used when the one needs to use binary blob to +appear as the contents of a file in the item's configfs directory. +To do so add the binary attribute to the NULL-terminated array +config_item_type->ct_bin_attrs, and the item appears in configfs, the +attribute file will appear with the configfs_bin_attribute->cb_attr.ca_name +filename. configfs_bin_attribute->cb_attr.ca_mode specifies the file +permissions. +The cb_private member is provided for use by the driver, while the +cb_max_size member specifies the maximum amount of vmalloc buffer +to be used. + +If binary attribute is readable and the config_item provides a +ct_item_ops->read_bin_attribute() method, that method will be called +whenever userspace asks for a read(2) on the attribute. The converse +will happen for write(2). The reads/writes are bufferred so only a +single read/write will occur; the attributes' need not concern itself +with it. + [struct config_group] A config_item cannot live in a vacuum. The only way one can be created diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 742f69d..a23616d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -90,6 +90,7 @@ parameter is applicable: NET Appropriate network support is enabled. NUMA NUMA support is enabled. NFS Appropriate NFS support is enabled. + OF Open Firmware support (device tree) is enabled. OSS OSS sound support is enabled. PV_OPS A paravirtualized kernel is enabled. PARIDE The ParIDE (parallel port IDE) subsystem is enabled. @@ -2618,6 +2619,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. This can be set from sysctl after boot. See Documentation/sysctl/vm.txt for details. + of_overlay_disable [OF] Disable device tree overlays at boot time. + ohci1394_dma=early [HW] enable debugging via the ohci1394 driver. See Documentation/debugging-via-ohci1394.txt for more info. diff --git b/Documentation/misc-devices/bone_capemgr.txt b/Documentation/misc-devices/bone_capemgr.txt new file mode 100644 index 0000000..2a8c766 --- /dev/null +++ b/Documentation/misc-devices/bone_capemgr.txt @@ -0,0 +1,63 @@ +--------------------------- + Beaglebone Cape-Manager +--------------------------- + +The beaglebone cape manager driver allows the automatic use of external +peripheral capes to be automatically supported by Linux without any manual +setup required by the user. + +Each beaglebone cape should contain an EEPROM that describes +it in a fixed I2C address on the i2c2 bus of the baseboard. +The format of the EEPROM is defined in the beaglebone reference +manual at: +http://beagleboard.org/static/beaglebone/latest/Docs/Hardware/BONE_SRM.pdf + +Reading the part number and revision information the manager +requests a firmware file formatted as a device tree overlay blob. + +Applying the overlay the devices are instantiated and the cape is +ready to be used. + +For instance if the part-number is BB-BONE-SERL-03 and the version is 00A1 +the firmware file requested will be BB-BONE-SERL-03-00A1-00A1.dtbo +It will be located by the in-kernel firmware +loader in the usual place, i.e. /lib/firmware/`uname -r`, /lib/firmware etc. + +The driver supports the following parameters (either as part of the kernel +command line or supplied at module insertion time). + +disable_partno: A comma delimited list of PART-NUMBER[:REV] of + disabled capes. +enable_partno: A comma delimited list of PART-NUMBER[:REV[:PRIO]] of + enabled capes. +boot_scan_period: The boot scan period in ms. When the cape manager is built-in + the kernel image, the firmware loader cannot find the files + before the rootfs is mounted. This parameter controls the + period with which the boot state is checked in that case. + +There's a sysfs control interface which is defined at the ABI documentation +area. + +Theory of operation: +-------------------- + +On driver probe the I2C EEPROM of the baseboard is read and information about +the current baseboard is retrieved. This information includes the mapping from +baseboard board name to DT friendly compatible string. I.e. the "A335BONE" board +name from EEPROM is mapped to the "ti,beaglebone" compatible string which should +be present in the dtbo to be loaded. + +Afterwards the EEPROMs declared in each slot are probed, and the EEPROMs found +are decoded keeping track the cape part-number and version data. + +Using the part-number and version a firmware file is requested (the firmware +file requested is -.dtbo). + +The dtbo is unflattend and the resulting device tree is matched against a +compatible baseboard, and in case of multiple parallel loading capes the +priorities defined are honored. That means that when there are multiple capes +being loaded in parallel the ones with the lowest priority number are loaded +first. + +Applying the device tree overlay makes the cape operational, as if it was part +of the kernel's booting device tree. diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index b784c27..5bf7026 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -309,10 +309,40 @@ Command from struct task_struct Passed by reference. +Device tree nodes: + + %pO[fnpPcCFr] + + For printing device tree nodes. The optional arguments are: + f device node full_name + n device node name + p device node phandle + P device node path spec (name + @unit) + F device node flags + c major compatible string + C full compatible string + r node reference count + Without any arguments prints full_name (same as %pOf) + The separator when using multiple arguments is '|' + + Examples: + + %pO /foo/bar@0 - Node full name + %pOf /foo/bar@0 - Same as above + %pOfp /foo/bar@0|10 - Node full name + phandle + %pOfcF /foo/bar@0|foo,device|--P- - Node full name + + major compatible string + + node flags + D - dynamic + d - detached + P - Populated + B - Populated bus + + Passed by reference + If you add other %p extensions, please extend lib/test_printf.c with one or more test cases, if at all feasible. - Thank you for your cooperation and attention. diff --git a/MAINTAINERS b/MAINTAINERS index 4c3e1d2..bd65734 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2130,6 +2130,14 @@ W: http://linuxtv.org S: Supported F: drivers/media/platform/sti/bdisp +BEAGLEBONE CAPEMANAGER +M: Pantelis Antoniou +S: Maintained +F: drivers/misc/beaglebone-capemgr.c +F: Documentation/misc-devices/bone_capemgr.txt +F: Documentation/devicetree/bindings/misc/bone_capemgr.txt +F: Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr + BEFS FILE SYSTEM S: Orphan F: Documentation/filesystems/befs.txt @@ -3744,6 +3752,15 @@ S: Maintained F: drivers/gpu/drm/sti F: Documentation/devicetree/bindings/display/st,stih4xx.txt +DRM DRIVERS FOR VIVANTE GPU IP +M: Lucas Stach +R: Russell King +R: Christian Gmeiner +L: dri-devel@lists.freedesktop.org +S: Maintained +F: drivers/gpu/drm/etnaviv +F: Documentation/devicetree/bindings/display/etnaviv + DSBR100 USB FM RADIO DRIVER M: Alexey Klimov L: linux-media@vger.kernel.org @@ -11157,6 +11174,13 @@ S: Maintained F: Documentation/usb/ohci.txt F: drivers/usb/host/ohci* +USB Generic Onboard Device Driver +M: Peter Chen +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/misc/generic_onboard_device.c + USB OTG FSM (Finite State Machine) M: Peter Chen T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9eca7ae..d4273d4 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -27,6 +27,10 @@ export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 30bbc37..ee9ec65 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,9 +1,15 @@ ifeq ($(CONFIG_OF),y) +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb + dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb + # Keep at91 dtb files sorted alphabetically for each SoC dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91rm9200ek.dtb \ @@ -302,6 +308,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-sabresd-wl1835.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6u-801x.dtb \ imx6dl-tx6u-811x.dtb \ @@ -311,6 +318,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ + imx6q-ccimx6sbc.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-dmo-edmqmx6.dtb \ @@ -330,6 +338,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ + imx6q-sabresd-wl1835.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-tx6q-1010.dtb \ @@ -342,6 +351,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard-revb1.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ + imx6sl-evk-wl1835.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ @@ -458,6 +468,23 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-sancloud-bbe.dtb \ + am335x-boneblack-audio.dtb \ + am335x-boneblack-bbb-exp-r.dtb \ + am335x-boneblack-bbb-exp-c.dtb \ + am335x-boneblack-bbbmini.dtb \ + am335x-boneblack-wl1835mod.dtb \ + am335x-boneblack-cape-bone-argus.dtb \ + am335x-bone-cape-bone-argus.dtb \ + am335x-arduino-tre.dtb \ + am335x-bonegreen-wireless.dtb \ + am335x-olimex-som.dtb \ + am335x-abbbi.dtb \ + am335x-bonegreen-overlay.dtb \ + am335x-boneblack-overlay.dtb \ + am335x-boneblack-nhdmi-overlay.dtb \ + am335x-boneblack-hdmi-overlay.dtb \ + am335x-boneblack-emmc-overlay.dtb \ am335x-bonegreen.dtb \ am335x-sl50.dtb \ am335x-evm.dtb \ @@ -472,6 +499,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ + omap4-panda-es-b3.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ diff --git b/arch/arm/boot/dts/am335x-abbbi.dts b/arch/arm/boot/dts/am335x-abbbi.dts new file mode 100644 index 0000000..2980478 --- /dev/null +++ b/arch/arm/boot/dts/am335x-abbbi.dts @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright 2015 Konsulko Group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "Arrow BeagleBone Black Industrial"; + compatible = "arrow,am335x-abbbi", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + adi_hdmi_bbbi_pins: adi_hdmi_bbbi_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + adi_hdmi_bbbi_off_pins: adi_hdmi_bbbi_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; + + mcasp0_pins_sleep: mcasp0_pins_sleep { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + adv7511w { + compatible = "adi,adv7511w"; + reg = <0x39>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&adi_hdmi_bbbi_pins>; + pinctrl-1 = <&adi_hdmi_bbbi_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; + +&mcasp0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp0_pins>; + pinctrl-1 = <&mcasp0_pins_sleep>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + hdmi_audio: hdmi_audio@0 { + compatible = "linux,hdmi-audio"; + status = "okay"; + }; + + sound { + compatible = "ti,beaglebone-black-audio"; + ti,model = "TI BeagleBone Black"; + ti,audio-codec = <&hdmi_audio>; + ti,mcasp-controller = <&mcasp0>; + ti,audio-routing = + "HDMI Out", "TX"; + clocks = <&clk_mcasp0>; + clock-names = "mclk"; + }; +}; + +&rtc { + system-power-controller; +}; diff --git b/arch/arm/boot/dts/am335x-arduino-tre.dts b/arch/arm/boot/dts/am335x-arduino-tre.dts new file mode 100644 index 0000000..0e6b364 --- /dev/null +++ b/arch/arm/boot/dts/am335x-arduino-tre.dts @@ -0,0 +1,577 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" + +/ { + model = "TI AM335x Arduino Tre"; + compatible = "ti,am335x-arduino-tre", "ti,am335x-boneblack", "ti,am335x-bone", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 512 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "arduino_tre:yel:usr0"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@1 { + label = "arduino_tre:red:usr1"; + gpios = <&gpio1 22 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@2 { + label = "arduino_tre:blu:usr2"; + gpios = <&gpio1 23 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@3 { + label = "arduino_tre:grn:usr3"; + gpios = <&gpio1 24 0>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + }; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE2L", "Line In", + "LINE2R", "Line In"; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + + can_bus_pins: pinmux_can_bus_pins { + pinctrl-single,pins = < + 0x120 0x31 /* DCAN0_RX MODE1 */ + 0x11c 0x01 /* DCAN0_TX MODE1 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emac_rmii1_pins: pinmux_emac_rmii1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 0x70 /* i2c0_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + 0x18c 0x70 /* i2c0_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 0x72 /*spi0_d1-i2c1_sda,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + 0x15c 0x72 /*spi0_cs0-i2c1_scl,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x150 0x72 /*spi0_scl.i2c2_sda,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + 0x154 0x72 /*spi0_d0.i2c2_scl,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0FC (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1A0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + tre_ehrpwm1_pins: pinmux_tre_ehrpwm1_pins { + pinctrl-single,pins = < + 0x48 0x06 /* PWM1A ~102 MODE6 */ + 0x4c 0x06 /* PWM1B ~103 MODE6 */ + >; + }; + + tre_ehrpwm2_pins: pinmux_tre_ehrpwm2_pins { + pinctrl-single,pins = < + 0x20 0x04 /* PWM2A ~100 MODE4 */ + 0x24 0x04 /* PWM2B ~101 MODE4 */ + >; + }; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + tre_audio_pins: pinmux_tre_audio_pins { + pinctrl-single,pins = < + 0x1ac 0x00 /*mcasp0_ahclkx (AUD_MCLK)->12MHz, INPUT | MODE0*/ + 0x190 0x20 /* mcasp0_aclkx (AUD_BCLK)->, INPUT | MODE0*/ + 0x194 0x20 /* mcasp0_fsx (AUD_FSX)-> , INPUT | MODE0*/ + 0x198 0x20 /* mcasp0_axr0 (AUD_DIN)<-, INPUT | MODE0*/ + 0x19c 0x22 /* mcasp0_ahclkr-_axr2 (AUD_DOUT)->, | MODE2*/ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x168 0x14 /* MOSI1 OUTPUT_PULLUP | MODE0 */ + 0x16c 0x34 /* MISO1 INPUT_PULLUP | MODE0 */ + 0x108 0x12 /* SCK1 OUTPUT_PULLUP | MODE0 */ + 0x164 0x12 /* SS1 OUTPUT_PULLUP | MODE0 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x180 0x30 /* UART1_rxd PULL_UP | MODE0 */ + 0x184 0x00 /* UART1_txd MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x12c 0x31 /* UART2_rxd PULL_UP | MODE1 */ + 0x130 0x01 /* UART2_txd MODE1 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x70 0x36 /* UART4_rxd PULL_UP | MODE6 */ + 0x74 0x06 /* UART4_txd MODE6 */ + >; + }; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&can_bus_pins>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + tps: tps@24 { + reg = <0x24>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + + tlv320aic3x: tlv320aic3x@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + status = "okay"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + +&epwmss1 { + status = "okay"; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm1_pins>; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm2_pins>; +}; + +&lcdc { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; + + control@44e10620 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@47402000 { + status = "okay"; + }; +}; + +&tps { + compatible = "ti,tps65217"; + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-always-on; + }; + + rtc@44e3e000 { + ti,system-power-controller; + }; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&tre_audio_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 2 0 1 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_rmii1_pins>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-bone-argus.dtsi b/arch/arm/boot/dts/am335x-bone-argus.dtsi new file mode 100644 index 0000000..21afad3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-argus.dtsi @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/ { + ocp { + P8_07_pinmux { + /* gpio2[2] */ + status = "disabled"; + }; + P8_08_pinmux { + /* gpio2[3] */ + status = "disabled"; + }; + P8_09_pinmux { + /* gpio2[5] */ + status = "disabled"; + }; + P8_10_pinmux { + /* gpio2[4] */ + status = "disabled"; + }; + P9_11_pinmux { + /* gpio0[30] */ + status = "disabled"; + }; + P9_17_pinmux { + /* gpio0[5] */ + status = "disabled"; + }; + P9_18_pinmux { + /* gpio0[4] */ + status = "disabled"; + }; + P9_41_pinmux { + /* gpio0[20] */ + status = "disabled"; + }; + P9_42_pinmux { + /* gpio0[7] */ + status = "disabled"; + }; + }; +}; + +/ { + argus-ups { + compatible = "argus-ups"; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&argus_ups_pins>; /* Refer to previous label */ + /* This section communicates the gpio numbers to the driver module */ + /* Note that gpio controllers appear to be numbered from 1-n here rather than 0-(n-1)????? */ + gpios = <&gpio0 30 0>, /* Request */ + <&gpio0 5 0>, /* Acknowledge */ + <&gpio0 4 0>, /* Watchdog */ + <&gpio2 2 0>, /* LED 1 Green */ + <&gpio2 3 0>, /* LED 1 Red */ + <&gpio2 5 0>, /* LED 2 Green */ + <&gpio2 4 0>, /* LED 2 Red */ + <&gpio0 20 0>, /* General Output #1 */ + <&gpio0 7 0>; /* General Output #2 */ + debug = <1>; + shutdown = <1>; + }; +}; + +&am33xx_pinmux { + argus_ups_pins: pinmux_argus_ups_pins { /* Set up pinmux */ + pinctrl-single,pins = < + 0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_d1.gpio0_4 */ + 0x090 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_advn_ale.gpio_2 */ + 0x094 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + 0x09c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + 0x098 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_gpmc_wen.gpio2_4 */ + 0x1b4 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0_20 */ + 0x164 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts new file mode 100644 index 0000000..82218f5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; + +#include "am335x-bone-argus.dtsi" diff --git b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi new file mode 100644 index 0000000..1ba0eb4 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi @@ -0,0 +1,348 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +&wkup_m3_ipc { + ti,scale-data-fw = "am335x-bone-scale-data.bin"; +}; + +&rtc { + system-power-controller; +}; diff --git b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi new file mode 100644 index 0000000..781e33f --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi @@ -0,0 +1,2052 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + /* P8_02 GND */ + /* P8_03 (ZCZ ball R9 ) emmc */ + /* P8_04 (ZCZ ball T9 ) emmc */ + /* P8_05 (ZCZ ball R8 ) emmc */ + /* P8_06 (ZCZ ball T8 ) emmc */ + + /* P8_07 (ZCZ ball R7 ) */ + P8_07_default_pin: pinmux_P8_07_default_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { + pinctrl-single,pins = <0x090 0x2F>; }; /* Mode 7, RxActive */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { + pinctrl-single,pins = <0x090 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { + pinctrl-single,pins = <0x090 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_08 (ZCZ ball T7 ) */ + P8_08_default_pin: pinmux_P8_08_default_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { + pinctrl-single,pins = <0x094 0x2F>; }; /* Mode 7, RxActive */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { + pinctrl-single,pins = <0x094 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { + pinctrl-single,pins = <0x094 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_09 (ZCZ ball T6 ) */ + P8_09_default_pin: pinmux_P8_09_default_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { + pinctrl-single,pins = <0x09c 0x2F>; }; /* Mode 7, RxActive */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { + pinctrl-single,pins = <0x09c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { + pinctrl-single,pins = <0x09c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_10 (ZCZ ball U6 ) */ + P8_10_default_pin: pinmux_P8_10_default_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { + pinctrl-single,pins = <0x098 0x2F>; }; /* Mode 7, RxActive */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { + pinctrl-single,pins = <0x098 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { + pinctrl-single,pins = <0x098 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_11 (ZCZ ball R12) */ + P8_11_default_pin: pinmux_P8_11_default_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { + pinctrl-single,pins = <0x034 0x2F>; }; /* Mode 7, RxActive */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { + pinctrl-single,pins = <0x034 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { + pinctrl-single,pins = <0x034 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { + pinctrl-single,pins = <0x034 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_12 (ZCZ ball T12) */ + P8_12_default_pin: pinmux_P8_12_default_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { + pinctrl-single,pins = <0x030 0x2F>; }; /* Mode 7, RxActive */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { + pinctrl-single,pins = <0x030 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { + pinctrl-single,pins = <0x030 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { + pinctrl-single,pins = <0x030 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_13 (ZCZ ball T10) */ + P8_13_default_pin: pinmux_P8_13_default_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { + pinctrl-single,pins = <0x024 0x2F>; }; /* Mode 7, RxActive */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { + pinctrl-single,pins = <0x024 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { + pinctrl-single,pins = <0x024 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_14 (ZCZ ball T11) */ + P8_14_default_pin: pinmux_P8_14_default_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_gpio_pin: pinmux_P8_14_gpio_pin { + pinctrl-single,pins = <0x028 0x2F>; }; /* Mode 7, RxActive */ + P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { + pinctrl-single,pins = <0x028 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_pwm_pin: pinmux_P8_14_pwm_pin { + pinctrl-single,pins = <0x028 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_15 (ZCZ ball U13) */ + P8_15_default_pin: pinmux_P8_15_default_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { + pinctrl-single,pins = <0x03c 0x2F>; }; /* Mode 7, RxActive */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { + pinctrl-single,pins = <0x03c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { + pinctrl-single,pins = <0x03c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { + pinctrl-single,pins = <0x03c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_16 (ZCZ ball V13) */ + P8_16_default_pin: pinmux_P8_16_default_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { + pinctrl-single,pins = <0x038 0x2F>; }; /* Mode 7, RxActive */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { + pinctrl-single,pins = <0x038 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { + pinctrl-single,pins = <0x038 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { + pinctrl-single,pins = <0x038 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_17 (ZCZ ball U12) */ + P8_17_default_pin: pinmux_P8_17_default_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_gpio_pin: pinmux_P8_17_gpio_pin { + pinctrl-single,pins = <0x02c 0x2F>; }; /* Mode 7, RxActive */ + P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { + pinctrl-single,pins = <0x02c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_pwm_pin: pinmux_P8_17_pwm_pin { + pinctrl-single,pins = <0x02c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_18 (ZCZ ball V12) */ + P8_18_default_pin: pinmux_P8_18_default_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { + pinctrl-single,pins = <0x08c 0x2F>; }; /* Mode 7, RxActive */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { + pinctrl-single,pins = <0x08c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_19 (ZCZ ball U10) */ + P8_19_default_pin: pinmux_P8_19_default_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { + pinctrl-single,pins = <0x020 0x2F>; }; /* Mode 7, RxActive */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { + pinctrl-single,pins = <0x020 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { + pinctrl-single,pins = <0x020 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_20 (ZCZ ball V9 ) emmc */ + /* P8_21 (ZCZ ball U9 ) emmc */ + /* P8_22 (ZCZ ball V8 ) emmc */ + /* P8_23 (ZCZ ball U8 ) emmc */ + /* P8_24 (ZCZ ball V7 ) emmc */ + /* P8_25 (ZCZ ball U7 ) emmc */ + + /* P8_26 (ZCZ ball V6 ) */ + P8_26_default_pin: pinmux_P8_26_default_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pin: pinmux_P8_26_gpio_pin { + pinctrl-single,pins = <0x07c 0x2F>; }; /* Mode 7, RxActive */ + P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { + pinctrl-single,pins = <0x07c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_27 (ZCZ ball U5 ) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { + pinctrl-single,pins = <0x0e0 0x2F>; }; /* Mode 7, RxActive */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { + pinctrl-single,pins = <0x0e0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { + pinctrl-single,pins = <0x0e0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { + pinctrl-single,pins = <0x0e0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_27_hdmi_pin: pinmux_P8_27_hdmi_pin { + pinctrl-single,pins = <0x0e0 0x00>; }; /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_28 (ZCZ ball V5 ) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { + pinctrl-single,pins = <0x0e8 0x2F>; }; /* Mode 7, RxActive */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { + pinctrl-single,pins = <0x0e8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { + pinctrl-single,pins = <0x0e8 0x05>; }; /* Mode 5, Pull-Down */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { + pinctrl-single,pins = <0x0e8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_28_hdmi_pin: pinmux_P8_28_hdmi_pin { + pinctrl-single,pins = <0x0e8 0x00>; }; /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_29 (ZCZ ball R5 ) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { + pinctrl-single,pins = <0x0e4 0x2F>; }; /* Mode 7, RxActive */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { + pinctrl-single,pins = <0x0e4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { + pinctrl-single,pins = <0x0e4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { + pinctrl-single,pins = <0x0e4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_29_hdmi_pin: pinmux_P8_29_hdmi_pin { + pinctrl-single,pins = <0x0e4 0x00>; }; /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_30 (ZCZ ball R6 ) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { + pinctrl-single,pins = <0x0ec 0x2F>; }; /* Mode 7, RxActive */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { + pinctrl-single,pins = <0x0ec 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { + pinctrl-single,pins = <0x0ec 0x05>; }; /* Mode 5, Pull-Down*/ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { + pinctrl-single,pins = <0x0ec 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_30_hdmi_pin: pinmux_P8_30_hdmi_pin { + pinctrl-single,pins = <0x0ec 0x00>; }; /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_31 (ZCZ ball V4 ) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { + pinctrl-single,pins = <0x0d8 0x2F>; }; /* Mode 7, RxActive */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { + pinctrl-single,pins = <0x0d8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { + pinctrl-single,pins = <0x0d8 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_31_hdmi_pin: pinmux_P8_31_hdmi_pin { + pinctrl-single,pins = <0x0d8 0x08>; }; /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_32 (ZCZ ball T5 ) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { + pinctrl-single,pins = <0x0dc 0x2F>; }; /* Mode 7, RxActive */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { + pinctrl-single,pins = <0x0dc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_uart_pin: pinmux_P8_32_uart_pin { + pinctrl-single,pins = <0x0dc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_32_hdmi_pin: pinmux_P8_32_hdmi_pin { + pinctrl-single,pins = <0x0dc 0x08>; }; /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_33 (ZCZ ball V3 ) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { + pinctrl-single,pins = <0x0d4 0x2F>; }; /* Mode 7, RxActive */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { + pinctrl-single,pins = <0x0d4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_hdmi_pin: pinmux_P8_33_hdmi_pin { + pinctrl-single,pins = <0x0d4 0x08>; }; /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_34 (ZCZ ball U4 ) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { + pinctrl-single,pins = <0x0cc 0x2F>; }; /* Mode 7, RxActive */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { + pinctrl-single,pins = <0x0cc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { + pinctrl-single,pins = <0x0cc 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_34_hdmi_pin: pinmux_P8_34_hdmi_pin { + pinctrl-single,pins = <0x0cc 0x08>; }; /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_35 (ZCZ ball V2 ) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { + pinctrl-single,pins = <0x0d0 0x2F>; }; /* Mode 7, RxActive */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { + pinctrl-single,pins = <0x0d0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_hdmi_pin: pinmux_P8_35_hdmi_pin { + pinctrl-single,pins = <0x0d0 0x08>; }; /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_36 (ZCZ ball U3 ) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { + pinctrl-single,pins = <0x0c8 0x2F>; }; /* Mode 7, RxActive */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { + pinctrl-single,pins = <0x0c8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { + pinctrl-single,pins = <0x0c8 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_36_hdmi_pin: pinmux_P8_36_hdmi_pin { + pinctrl-single,pins = <0x0c8 0x08>; }; /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_37 (ZCZ ball U1 ) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { + pinctrl-single,pins = <0x0c0 0x2F>; }; /* Mode 7, RxActive */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { + pinctrl-single,pins = <0x0c0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { + pinctrl-single,pins = <0x0c0 0x04>; }; /* Mode 4, Pull-Down*/ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { + pinctrl-single,pins = <0x0c0 0x02>; }; /* Mode 2, Pull-Down*/ + P8_37_hdmi_pin: pinmux_P8_37_hdmi_pin { + pinctrl-single,pins = <0x0c0 0x08>; }; /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_38 (ZCZ ball U2 ) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { + pinctrl-single,pins = <0x0c4 0x2F>; }; /* Mode 7, RxActive */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { + pinctrl-single,pins = <0x0c4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { + pinctrl-single,pins = <0x0c4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { + pinctrl-single,pins = <0x0c4 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_38_hdmi_pin: pinmux_P8_38_hdmi_pin { + pinctrl-single,pins = <0x0c4 0x08>; }; /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_39 (ZCZ ball T3 ) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { + pinctrl-single,pins = <0x0b8 0x2F>; }; /* Mode 7, RxActive */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { + pinctrl-single,pins = <0x0b8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { + pinctrl-single,pins = <0x0b8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { + pinctrl-single,pins = <0x0b8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_39_hdmi_pin: pinmux_P8_39_hdmi_pin { + pinctrl-single,pins = <0x0b8 0x08>; }; /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_40 (ZCZ ball T4 ) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { + pinctrl-single,pins = <0x0bc 0x2F>; }; /* Mode 7, RxActive */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { + pinctrl-single,pins = <0x0bc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { + pinctrl-single,pins = <0x0bc 0x05>; }; /* Mode 5, Pull-Down*/ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { + pinctrl-single,pins = <0x0bc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_40_hdmi_pin: pinmux_P8_40_hdmi_pin { + pinctrl-single,pins = <0x0bc 0x08>; }; /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_41 (ZCZ ball T1 ) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { + pinctrl-single,pins = <0x0b0 0x2F>; }; /* Mode 7, RxActive */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { + pinctrl-single,pins = <0x0b0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { + pinctrl-single,pins = <0x0b0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { + pinctrl-single,pins = <0x0b0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_41_hdmi_pin: pinmux_P8_41_hdmi_pin { + pinctrl-single,pins = <0x0b0 0x08>; }; /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_42 (ZCZ ball T2 ) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { + pinctrl-single,pins = <0x0b4 0x2F>; }; /* Mode 7, RxActive */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { + pinctrl-single,pins = <0x0b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { + pinctrl-single,pins = <0x0b4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { + pinctrl-single,pins = <0x0b4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_42_hdmi_pin: pinmux_P8_42_hdmi_pin { + pinctrl-single,pins = <0x0b4 0x08>; }; /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_43 (ZCZ ball R3 ) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { + pinctrl-single,pins = <0x0a8 0x2F>; }; /* Mode 7, RxActive */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { + pinctrl-single,pins = <0x0a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { + pinctrl-single,pins = <0x0a8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { + pinctrl-single,pins = <0x0a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { + pinctrl-single,pins = <0x0a8 0x03>; }; /* Mode 3, Pull-Down */ + P8_43_hdmi_pin: pinmux_P8_43_hdmi_pin { + pinctrl-single,pins = <0x0a8 0x08>; }; /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_44 (ZCZ ball R4 ) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { + pinctrl-single,pins = <0x0ac 0x2F>; }; /* Mode 7, RxActive */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { + pinctrl-single,pins = <0x0ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { + pinctrl-single,pins = <0x0ac 0x05>; }; /* Mode 5, Pull-Down*/ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { + pinctrl-single,pins = <0x0ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { + pinctrl-single,pins = <0x0ac 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P8_44_hdmi_pin: pinmux_P8_44_hdmi_pin { + pinctrl-single,pins = <0x0ac 0x08>; }; /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_45 (ZCZ ball R1 ) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { + pinctrl-single,pins = <0x0a0 0x2F>; }; /* Mode 7, RxActive */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { + pinctrl-single,pins = <0x0a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { + pinctrl-single,pins = <0x0a0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { + pinctrl-single,pins = <0x0a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { + pinctrl-single,pins = <0x0a0 0x03>; }; /* Mode 3, Pull-Down*/ + P8_45_hdmi_pin: pinmux_P8_45_hdmi_pin { + pinctrl-single,pins = <0x0a0 0x08>; }; /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_46 (ZCZ ball R2 ) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { + pinctrl-single,pins = <0x0a4 0x2F>; }; /* Mode 7, RxActive */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { + pinctrl-single,pins = <0x0a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { + pinctrl-single,pins = <0x0a4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { + pinctrl-single,pins = <0x0a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { + pinctrl-single,pins = <0x0a4 0x03>; }; /* Mode 3, Pull-Down*/ + P8_46_hdmi_pin: pinmux_P8_46_hdmi_pin { + pinctrl-single,pins = <0x0a4 0x08>; }; /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + /* P9_02 GND */ + /* P9_03 3.3V */ + /* P9_04 3.3V */ + /* P9_05 VDD_5V */ + /* P9_06 VDD_5V */ + /* P9_07 SYS_5V */ + /* P9_08 SYS_5V */ + /* P9_09 PWR_BUT */ + /* P9_10 (ZCZ ball A10) RESETn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_12 (ZCZ ball U18) */ + P9_12_default_pin: pinmux_P9_12_default_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { + pinctrl-single,pins = <0x078 0x2F>; }; /* Mode 7, RxActive */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { + pinctrl-single,pins = <0x078 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P9_13 (ZCZ ball U17) */ + P9_13_default_pin: pinmux_P9_13_default_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { + pinctrl-single,pins = <0x074 0x2F>; }; /* Mode 7, RxActive */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { + pinctrl-single,pins = <0x074 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { + pinctrl-single,pins = <0x074 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_14 (ZCZ ball U14) */ + P9_14_default_pin: pinmux_P9_14_default_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { + pinctrl-single,pins = <0x048 0x2F>; }; /* Mode 7, RxActive */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { + pinctrl-single,pins = <0x048 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { + pinctrl-single,pins = <0x048 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_15 (ZCZ ball R13) */ + P9_15_default_pin: pinmux_P9_15_default_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { + pinctrl-single,pins = <0x040 0x2F>; }; /* Mode 7, RxActive */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { + pinctrl-single,pins = <0x040 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { + pinctrl-single,pins = <0x040 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_16 (ZCZ ball T14) */ + P9_16_default_pin: pinmux_P9_16_default_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { + pinctrl-single,pins = <0x04c 0x2F>; }; /* Mode 7, RxActive */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { + pinctrl-single,pins = <0x04c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { + pinctrl-single,pins = <0x04c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_17 (ZCZ ball A16) */ + P9_17_default_pin: pinmux_P9_17_default_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { + pinctrl-single,pins = <0x15c 0x2F>; }; /* Mode 7, RxActive */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { + pinctrl-single,pins = <0x15c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_17_spi_pin: pinmux_P9_17_spi_pin { + pinctrl-single,pins = <0x15c 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { + pinctrl-single,pins = <0x15c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { + pinctrl-single,pins = <0x15c 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_18 (ZCZ ball B16) */ + P9_18_default_pin: pinmux_P9_18_default_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { + pinctrl-single,pins = <0x158 0x2F>; }; /* Mode 7, RxActive */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { + pinctrl-single,pins = <0x158 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { + pinctrl-single,pins = <0x158 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { + pinctrl-single,pins = <0x158 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { + pinctrl-single,pins = <0x158 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_19 (ZCZ ball D17) */ + P9_19_default_pin: pinmux_P9_19_default_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { + pinctrl-single,pins = <0x17c 0x2F>; }; /* Mode 7, RxActive */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { + pinctrl-single,pins = <0x17c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_19_can_pin: pinmux_P9_19_can_pin { + pinctrl-single,pins = <0x17c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { + pinctrl-single,pins = <0x17c 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_20 (ZCZ ball D18) */ + P9_20_default_pin: pinmux_P9_20_default_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { + pinctrl-single,pins = <0x178 0x2F>; }; /* Mode 7, RxActive */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { + pinctrl-single,pins = <0x178 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_20_can_pin: pinmux_P9_20_can_pin { + pinctrl-single,pins = <0x178 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { + pinctrl-single,pins = <0x178 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_21 (ZCZ ball B17) */ + P9_21_default_pin: pinmux_P9_21_default_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { + pinctrl-single,pins = <0x154 0x2F>; }; /* Mode 7, RxActive */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { + pinctrl-single,pins = <0x154 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { + pinctrl-single,pins = <0x154 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { + pinctrl-single,pins = <0x154 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { + pinctrl-single,pins = <0x154 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { + pinctrl-single,pins = <0x154 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_22 (ZCZ ball A17) */ + P9_22_default_pin: pinmux_P9_22_default_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { + pinctrl-single,pins = <0x150 0x2F>; }; /* Mode 7, RxActive */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { + pinctrl-single,pins = <0x150 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_22_spi_pin: pinmux_P9_22_spi_pin { + pinctrl-single,pins = <0x150 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { + pinctrl-single,pins = <0x150 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { + pinctrl-single,pins = <0x150 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { + pinctrl-single,pins = <0x150 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_23 (ZCZ ball V14) */ + P9_23_default_pin: pinmux_P9_23_default_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { + pinctrl-single,pins = <0x044 0x2F>; }; /* Mode 7, RxActive */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { + pinctrl-single,pins = <0x044 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { + pinctrl-single,pins = <0x044 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_24 (ZCZ ball D15) */ + P9_24_default_pin: pinmux_P9_24_default_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { + pinctrl-single,pins = <0x184 0x2F>; }; /* Mode 7, RxActive */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { + pinctrl-single,pins = <0x184 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { + pinctrl-single,pins = <0x184 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_24_can_pin: pinmux_P9_24_can_pin { + pinctrl-single,pins = <0x184 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { + pinctrl-single,pins = <0x184 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { + pinctrl-single,pins = <0x184 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_25 (ZCZ ball A14) Audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { + pinctrl-single,pins = <0x1ac 0x2F>; }; /* Mode 7, RxActive */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { + pinctrl-single,pins = <0x1ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { + pinctrl-single,pins = <0x1ac 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { + pinctrl-single,pins = <0x1ac 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { + pinctrl-single,pins = <0x1ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_25_audio_pin: pinmux_P9_25_audio_pin { + pinctrl-single,pins = <0x1ac (PIN_INPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_ahclkx.mcasp0_ahclkx */ + + /* P9_26 (ZCZ ball D16) */ + P9_26_default_pin: pinmux_P9_26_default_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { + pinctrl-single,pins = <0x180 0x2F>; }; /* Mode 7, RxActive */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { + pinctrl-single,pins = <0x180 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { + pinctrl-single,pins = <0x180 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_26_can_pin: pinmux_P9_26_can_pin { + pinctrl-single,pins = <0x180 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { + pinctrl-single,pins = <0x180 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { + pinctrl-single,pins = <0x180 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_27 (ZCZ ball C13) */ + P9_27_default_pin: pinmux_P9_27_default_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { + pinctrl-single,pins = <0x1a4 0x2F>; }; /* Mode 7, RxActive */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { + pinctrl-single,pins = <0x1a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { + pinctrl-single,pins = <0x1a4 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { + pinctrl-single,pins = <0x1a4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { + pinctrl-single,pins = <0x1a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_28 (ZCZ ball C12) Audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { + pinctrl-single,pins = <0x19c 0x2F>; }; /* Mode 7, RxActive */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { + pinctrl-single,pins = <0x19c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { + pinctrl-single,pins = <0x19c 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_28_spi_pin: pinmux_P9_28_spi_pin { + pinctrl-single,pins = <0x19c 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { + pinctrl-single,pins = <0x19c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { + pinctrl-single,pins = <0x19c 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { + pinctrl-single,pins = <0x19c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_28_audio_pin: pinmux_P9_28_audio_pin { + pinctrl-single,pins = <0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)>; }; /* mcasp0_ahclkr.mcasp0_axr2 */ + + /* P9_29 (ZCZ ball B13) Audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { + pinctrl-single,pins = <0x194 0x2F>; }; /* Mode 7, RxActive */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { + pinctrl-single,pins = <0x194 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { + pinctrl-single,pins = <0x194 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { + pinctrl-single,pins = <0x194 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { + pinctrl-single,pins = <0x194 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { + pinctrl-single,pins = <0x194 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_29_audio_pin: pinmux_P9_29_audio_pin { + pinctrl-single,pins = <0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_fsx.mcasp0_fsx */ + + /* P9_30 (ZCZ ball D12) */ + P9_30_default_pin: pinmux_P9_30_default_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_gpio_pin: pinmux_P9_30_gpio_pin { + pinctrl-single,pins = <0x198 0x2F>; }; /* Mode 7, RxActive */ + P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { + pinctrl-single,pins = <0x198 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_pwm_pin: pinmux_P9_30_pwm_pin { + pinctrl-single,pins = <0x198 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_30_spi_pin: pinmux_P9_30_spi_pin { + pinctrl-single,pins = <0x198 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_30_pruout_pin: pinmux_P9_30_pruout_pin { + pinctrl-single,pins = <0x198 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_30_pruin_pin: pinmux_P9_30_pruin_pin { + pinctrl-single,pins = <0x198 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_31 (ZCZ ball A13) Audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { + pinctrl-single,pins = <0x190 0x2F>; }; /* Mode 7, RxActive */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { + pinctrl-single,pins = <0x190 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { + pinctrl-single,pins = <0x190 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_31_spi_pin: pinmux_P9_31_spi_pin { + pinctrl-single,pins = <0x190 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { + pinctrl-single,pins = <0x190 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { + pinctrl-single,pins = <0x190 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_31_audio_pin: pinmux_P9_31_audio_pin { + pinctrl-single,pins = <0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)>; }; /* mcasp0_aclkx.mcasp0_aclkx */ + + /* P9_32 VADC */ + /* P9_33 (ZCZ ball C8 ) AIN4 */ + /* P9_34 AGND */ + /* P9_35 (ZCZ ball A8 ) AIN6 */ + /* P9_36 (ZCZ ball B8 ) AIN5 */ + /* P9_37 (ZCZ ball B7 ) AIN2 */ + /* P9_38 (ZCZ ball A7 ) AIN3 */ + /* P9_39 (ZCZ ball B6 ) AIN0 */ + /* P9_40 (ZCZ ball C7 ) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_default_pin: pinmux_P9_41_default_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { + pinctrl-single,pins = <0x1b4 0x2F>; }; /* Mode 7, RxActive */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { + pinctrl-single,pins = <0x1b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { + pinctrl-single,pins = <0x1b4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { + pinctrl-single,pins = <0x1b4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_default_pin: pinmux_P9_91_default_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { + pinctrl-single,pins = <0x1a8 0x2F>; }; /* Mode 7, RxActive */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { + pinctrl-single,pins = <0x1a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { + pinctrl-single,pins = <0x1a8 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { + pinctrl-single,pins = <0x1a8 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { + pinctrl-single,pins = <0x1a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_42 (ZCZ ball C18) */ + P9_42_default_pin: pinmux_P9_42_default_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { + pinctrl-single,pins = <0x164 0x2F>; }; /* Mode 7, RxActive */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { + pinctrl-single,pins = <0x164 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { + pinctrl-single,pins = <0x164 0x20>; }; /* Mode 0, Pull-Down, RxActive */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { + pinctrl-single,pins = <0x164 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_42_spics_pin: pinmux_P9_42_spics_pin { + pinctrl-single,pins = <0x164 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P9_42_spiclk_pin: pinmux_P9_42_spiclk_pin { + pinctrl-single,pins = <0x164 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_default_pin: pinmux_P9_92_default_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { + pinctrl-single,pins = <0x1a0 0x2F>; }; /* Mode 7, RxActive */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { + pinctrl-single,pins = <0x1a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { + pinctrl-single,pins = <0x1a0 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { + pinctrl-single,pins = <0x1a0 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { + pinctrl-single,pins = <0x1a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_43 GND */ + /* P9_44 GND */ + /* P9_45 GND */ + /* P9_46 GND */ +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_timer_pin>; + }; + + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_timer_pin>; + }; + + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_timer_pin>; + }; + + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_timer_pin>; + }; + + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_pruout_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + }; + + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_pruout_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + }; + + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_pwm_pin>; + }; + + P8_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_14_default_pin>; + pinctrl-1 = <&P8_14_gpio_pin>; + pinctrl-2 = <&P8_14_gpio_pu_pin>; + pinctrl-3 = <&P8_14_gpio_pd_pin>; + pinctrl-4 = <&P8_14_pwm_pin>; + }; + + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_pruin_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + }; + + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_pruin_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + }; + + P8_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_17_default_pin>; + pinctrl-1 = <&P8_17_gpio_pin>; + pinctrl-2 = <&P8_17_gpio_pu_pin>; + pinctrl-3 = <&P8_17_gpio_pd_pin>; + pinctrl-4 = <&P8_17_pwm_pin>; + }; + + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + }; + + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_pwm_pin>; + }; + + P8_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_26_default_pin>; + pinctrl-1 = <&P8_26_gpio_pin>; + pinctrl-2 = <&P8_26_gpio_pu_pin>; + pinctrl-3 = <&P8_26_gpio_pd_pin>; + }; + + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_pruout_pin>; + pinctrl-5 = <&P8_27_pruin_pin>; + pinctrl-6 = <&P8_27_hdmi_pin>; + }; + + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_pruout_pin>; + pinctrl-5 = <&P8_28_pruin_pin>; + pinctrl-6 = <&P8_28_hdmi_pin>; + }; + + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_pruout_pin>; + pinctrl-5 = <&P8_29_pruin_pin>; + pinctrl-6 = <&P8_29_hdmi_pin>; + }; + + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_pruout_pin>; + pinctrl-5 = <&P8_30_pruin_pin>; + pinctrl-6 = <&P8_30_hdmi_pin>; + }; + + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart", "hdmi"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_uart_pin>; + pinctrl-5 = <&P8_31_hdmi_pin>; + }; + + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_hdmi_pin>; + }; + + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_hdmi_pin>; + }; + + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_pwm_pin>; + pinctrl-5 = <&P8_34_hdmi_pin>; + }; + + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_hdmi_pin>; + }; + + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_pwm_pin>; + pinctrl-5 = <&P8_36_hdmi_pin>; + }; + + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_uart_pin>; + pinctrl-5 = <&P8_37_pwm_pin>; + pinctrl-6 = <&P8_37_hdmi_pin>; + }; + + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_uart_pin>; + pinctrl-5 = <&P8_38_pwm_pin>; + pinctrl-6 = <&P8_38_hdmi_pin>; + }; + + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_pruout_pin>; + pinctrl-5 = <&P8_39_pruin_pin>; + pinctrl-6 = <&P8_39_hdmi_pin>; + }; + + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_pruout_pin>; + pinctrl-5 = <&P8_40_pruin_pin>; + pinctrl-6 = <&P8_40_hdmi_pin>; + }; + + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_pruout_pin>; + pinctrl-5 = <&P8_41_pruin_pin>; + pinctrl-6 = <&P8_41_hdmi_pin>; + }; + + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_pruout_pin>; + pinctrl-5 = <&P8_42_pruin_pin>; + pinctrl-6 = <&P8_42_hdmi_pin>; + }; + + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_pruout_pin>; + pinctrl-5 = <&P8_43_pruin_pin>; + pinctrl-6 = <&P8_43_pwm_pin>; + pinctrl-7 = <&P8_43_hdmi_pin>; + }; + + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_pruout_pin>; + pinctrl-5 = <&P8_44_pruin_pin>; + pinctrl-6 = <&P8_44_pwm_pin>; + pinctrl-7 = <&P8_44_hdmi_pin>; + }; + + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_pruout_pin>; + pinctrl-5 = <&P8_45_pruin_pin>; + pinctrl-6 = <&P8_45_pwm_pin>; + pinctrl-7 = <&P8_45_hdmi_pin>; + }; + + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_pruout_pin>; + pinctrl-5 = <&P8_46_pruin_pin>; + pinctrl-6 = <&P8_46_pwm_pin>; + pinctrl-7 = <&P8_46_hdmi_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_uart_pin>; + }; + + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + }; + + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_uart_pin>; + }; + + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_pwm_pin>; + }; + + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_pwm_pin>; + }; + + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_pwm_pin>; + }; + + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_spi_pin>; + pinctrl-5 = <&P9_17_i2c_pin>; + pinctrl-6 = <&P9_17_pwm_pin>; + }; + + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_spi_pin>; + pinctrl-5 = <&P9_18_i2c_pin>; + pinctrl-6 = <&P9_18_pwm_pin>; + }; + + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_can_pin>; + pinctrl-5 = <&P9_19_i2c_pin>; + }; + + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_can_pin>; + pinctrl-5 = <&P9_20_i2c_pin>; + }; + + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_spi_pin>; + pinctrl-5 = <&P9_21_uart_pin>; + pinctrl-6 = <&P9_21_i2c_pin>; + pinctrl-7 = <&P9_21_pwm_pin>; + }; + + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_spi_pin>; + pinctrl-5 = <&P9_22_uart_pin>; + pinctrl-6 = <&P9_22_i2c_pin>; + pinctrl-7 = <&P9_22_pwm_pin>; + }; + + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_pwm_pin>; + }; + + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_uart_pin>; + pinctrl-5 = <&P9_24_can_pin>; + pinctrl-6 = <&P9_24_i2c_pin>; + pinctrl-7 = <&P9_24_pruin_pin>; + }; + + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_qep_pin>; + pinctrl-5 = <&P9_25_pruout_pin>; + pinctrl-6 = <&P9_25_pruin_pin>; + pinctrl-7 = <&P9_25_audio_pin>; + }; + + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_uart_pin>; + pinctrl-5 = <&P9_26_can_pin>; + pinctrl-6 = <&P9_26_i2c_pin>; + pinctrl-7 = <&P9_26_pruin_pin>; + }; + + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_qep_pin>; + pinctrl-5 = <&P9_27_pruout_pin>; + pinctrl-6 = <&P9_27_pruin_pin>; + }; + + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pwm2", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_pwm_pin>; + pinctrl-5 = <&P9_28_spi_pin>; + pinctrl-6 = <&P9_28_pwm2_pin>; + pinctrl-7 = <&P9_28_pruout_pin>; + pinctrl-8 = <&P9_28_pruin_pin>; + pinctrl-9 = <&P9_28_audio_pin>; + }; + + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_pwm_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pruout_pin>; + pinctrl-7 = <&P9_29_pruin_pin>; + pinctrl-8 = <&P9_29_audio_pin>; + }; + + P9_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin"; + pinctrl-0 = <&P9_30_default_pin>; + pinctrl-1 = <&P9_30_gpio_pin>; + pinctrl-2 = <&P9_30_gpio_pu_pin>; + pinctrl-3 = <&P9_30_gpio_pd_pin>; + pinctrl-4 = <&P9_30_pwm_pin>; + pinctrl-5 = <&P9_30_spi_pin>; + pinctrl-6 = <&P9_30_pruout_pin>; + pinctrl-7 = <&P9_30_pruin_pin>; + }; + + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_pwm_pin>; + pinctrl-5 = <&P9_31_spi_pin>; + pinctrl-6 = <&P9_31_pruout_pin>; + pinctrl-7 = <&P9_31_pruin_pin>; + pinctrl-8 = <&P9_31_audio_pin>; + }; + + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_timer_pin>; + pinctrl-5 = <&P9_41_pruin_pin>; + }; + + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_qep_pin>; + pinctrl-5 = <&P9_91_pruout_pin>; + pinctrl-6 = <&P9_91_pruin_pin>; + }; + + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "uart", "spics", "spiclk"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_pwm_pin>; + pinctrl-5 = <&P9_42_uart_pin>; + pinctrl-6 = <&P9_42_spics_pin>; + pinctrl-7 = <&P9_42_spiclk_pin>; + }; + + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_qep_pin>; + pinctrl-5 = <&P9_92_pruout_pin>; + pinctrl-6 = <&P9_92_pruin_pin>; + }; + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + P8_14 { + gpio-name = "P8_14"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + P8_17 { + gpio-name = "P8_17"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_26 { + gpio-name = "P8_26"; + gpio = <&gpio1 29 0>; + input; + dir-changeable; + }; + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + P9_30 { + gpio-name = "P9_30"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 5d370d5..b34f3bb 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -25,14 +25,14 @@ compatible = "gpio-leds"; led@2 { - label = "beaglebone:green:heartbeat"; + label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { - label = "beaglebone:green:mmc0"; + label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -62,117 +62,112 @@ }; &am33xx_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ - 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; }; @@ -308,6 +303,9 @@ */ ti,pmic-shutdown-controller; + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + regulators { dcdc1_reg: regulator@0 { regulator-name = "vdds_dpr"; @@ -359,15 +357,11 @@ phy-mode = "mii"; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; -}; - &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; status = "okay"; }; @@ -393,3 +387,32 @@ &sham { status = "okay"; }; + +&rtc { + system-power-controller; +}; + +/* the cape manager */ +/ { + bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cells = <&baseboard_data &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi new file mode 100644 index 0000000..7d8f673 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* standard */ + +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-jtag.dtsi b/arch/arm/boot/dts/am335x-bone-jtag.dtsi new file mode 100644 index 0000000..a92db8e --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-jtag.dtsi @@ -0,0 +1,20 @@ +/* + * Device Tree Source for bone jtag + * + * Copyright (C) 2015 Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi new file mode 100644 index 0000000..0961216 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "can"; + * }; + * P9_20_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.d_can0_tx */ + BONE_P9_20 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_19: uart1_rtsn.d_can0_rx */ + BONE_P9_19 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan0 { + pinctrl-0 = <&dcan0_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi new file mode 100644 index 0000000..9e26413 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "can"; + * }; + * P9_26_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan1 { + pinctrl-0 = <&dcan1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi new file mode 100644 index 0000000..22cf462 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* lsblk */ + +#include +#include "am335x-peripheral-emmc.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_21_pinmux { + * state = "disabled"; + * }; + * P8_20_pinmux { + * state = "disabled"; + * }; + * P8_25_pinmux { + * state = "disabled"; + * }; + * P8_24_pinmux { + * state = "disabled"; + * }; + * P8_05_pinmux { + * state = "disabled"; + * }; + * P8_06_pinmux { + * state = "disabled"; + * }; + * P8_23_pinmux { + * state = "disabled"; + * }; + * P8_22_pinmux { + * state = "disabled"; + * }; + * P8_03_pinmux { + * state = "disabled"; + * }; + * P8_04_pinmux { + * state = "disabled"; + * }; + *}; + * + *&mmc2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + /* P8_21: gpmc_csn1.mmc1_clk */ + BONE_P8_21 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_20: gpmc_csn2.mmc1_cmd */ + BONE_P8_20 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_25: gpmc_ad0.mmc1_dat0 */ + BONE_P8_25 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_24: gpmc_ad1.mmc1_dat1 */ + BONE_P8_24 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_05: gpmc_ad2.mmc1_dat2 */ + BONE_P8_05 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_06: gpmc_ad3.mmc1_dat3 */ + BONE_P8_06 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_23: gpmc_ad4.mmc1_dat4 */ + BONE_P8_23 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_22: gpmc_ad5.mmc1_dat5 */ + BONE_P8_22 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_03: gpmc_ad6.mmc1_dat6 */ + BONE_P8_03 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_04: gpmc_ad7.mmc1_dat7 */ + BONE_P8_04 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&mmc2 { + pinctrl-0 = <&emmc_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi new file mode 100644 index 0000000..abf3b57 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-i2c2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "i2c"; + * }; + * P9_20_pinmux { + * mode = "i2c"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.i2c2_sda */ + BONE_P9_20 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + /* P9_19: uart1_rtsn.i2c2_scl */ + BONE_P9_19 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..65e5fbb --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + lcd_24bit_pins: pinmux_lcd_24bit_pins { + pinctrl-single,pins = < + + /* P8_45: lcd_data0.lcd_data0 */ + BONE_P8_45 (PIN_OUTPUT | MUX_MODE0) + /* P8_46: lcd_data1.lcd_data1 */ + BONE_P8_46 (PIN_OUTPUT | MUX_MODE0) + /* P8_43: lcd_data2.lcd_data2 */ + BONE_P8_43 (PIN_OUTPUT | MUX_MODE0) + /* P8_44: lcd_data3.lcd_data3 */ + BONE_P8_44 (PIN_OUTPUT | MUX_MODE0) + /* P8_41: lcd_data4.lcd_data4 */ + BONE_P8_41 (PIN_OUTPUT | MUX_MODE0) + /* P8_42: lcd_data5.lcd_data5 */ + BONE_P8_42 (PIN_OUTPUT | MUX_MODE0) + /* P8_39: lcd_data6.lcd_data6 */ + BONE_P8_39 (PIN_OUTPUT | MUX_MODE0) + /* P8_40: lcd_data7.lcd_data7 */ + BONE_P8_40 (PIN_OUTPUT | MUX_MODE0) + /* P8_37: lcd_data8.lcd_data8 */ + BONE_P8_37 (PIN_OUTPUT | MUX_MODE0) + /* P8_38: lcd_data9.lcd_data9 */ + BONE_P8_38 (PIN_OUTPUT | MUX_MODE0) + /* P8_36: lcd_data10.lcd_data10 */ + BONE_P8_36 (PIN_OUTPUT | MUX_MODE0) + /* P8_34: lcd_data11.lcd_data11 */ + BONE_P8_34 (PIN_OUTPUT | MUX_MODE0) + /* P8_35: lcd_data12.lcd_data12 */ + BONE_P8_35 (PIN_OUTPUT | MUX_MODE0) + /* P8_33: lcd_data13.lcd_data13 */ + BONE_P8_33 (PIN_OUTPUT | MUX_MODE0) + /* P8_31: lcd_data14.lcd_data14 */ + BONE_P8_31 (PIN_OUTPUT | MUX_MODE0) + /* P8_32: lcd_data15.lcd_data15 */ + BONE_P8_32 (PIN_OUTPUT | MUX_MODE0) + + /* gpmc_ad15.lcd_data16 */ + BONE_P8_15 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + BONE_P8_16 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + BONE_P8_11 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + BONE_P8_12 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + BONE_P8_17 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + BONE_P8_14 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + BONE_P8_13 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad8.lcd_data23 */ + BONE_P8_19 (PIN_OUTPUT | MUX_MODE1) + + /* P8_27: lcd_vsync.lcd_vsync */ + BONE_P8_27 (PIN_OUTPUT | MUX_MODE0) + /* P8_29: lcd_hsync.lcd_hsync */ + BONE_P8_29 (PIN_OUTPUT | MUX_MODE0) + /* P8_28: lcd_pclk.lcd_pclk*/ + BONE_P8_28 (PIN_OUTPUT | MUX_MODE0) + /* P8_30: lcd_ac_bias_en.lcd_ac_bias_en */ + BONE_P8_30 (PIN_OUTPUT | MUX_MODE0) + >; + }; +}; + +/ { + panel { + pinctrl-0 = <&lcd_24bit_pins>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi new file mode 100644 index 0000000..ae5b813 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS1 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "uart"; + * }; + * P9_26_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* P9_24: uart1_txd.uart1_txd */ + BONE_P9_24 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P9_26: uart1_rxd.uart1_rxd */ + BONE_P9_26 (PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi new file mode 100644 index 0000000..5fa593a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS2 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_21_pinmux { + * mode = "uart"; + * }; + * P9_22_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* P9_21: spi0_d0.uart2_txd */ + BONE_P9_21 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + /* P9_22: spi0_sclk.uart2_rxd */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi new file mode 100644 index 0000000..1d22a95 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS4 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS4.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_11_pinmux { + * mode = "uart"; + * }; + * P9_13_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart4 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; +}; + +&uart4 { + pinctrl-0 = <&uart4_pins>; +}; diff --git b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi new file mode 100644 index 0000000..01d0aec --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS5 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS5.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_37_pinmux { + * mode = "uart"; + * }; + * P8_38_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart5 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&uart5 { + pinctrl-0 = <&uart5_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 6b84937..b195b9e 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -9,6 +9,7 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" / { model = "TI AM335x BeagleBone"; diff --git b/arch/arm/boot/dts/am335x-boneblack-audio.dts b/arch/arm/boot/dts/am335x-boneblack-audio.dts new file mode 100644 index 0000000..f8a310e --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-audio.dts @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts new file mode 100644 index 0000000..f5ec278 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +#include "am335x-cape-bbb-exp-c.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts new file mode 100644 index 0000000..27b3b72 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +#include "am335x-cape-bbb-exp-r.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts new file mode 100644 index 0000000..68476d7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbbmini.dts @@ -0,0 +1,191 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Modified by Mirko Denecke + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" + +#include +#include + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + pru_pins: pinmux_pru_pins { + pinctrl-single,pins = < + 0x03c 0x35 /* ecap0_in_pwm0_out.pr1_ecap0_ecap_capin, MODE5 | INPUT_PULLUP | PRU, PPM-sum, SBUS, DSM */ + + 0x0e8 0x25 /* lcd_pclk.pr1_pru1_pru_r30_10, MODE5 | OUTPUT | PRU, CH_1 */ + 0x0e0 0x25 /* lcd_vsync.pr1_pru1_pru_r30_8, MODE5 | OUTPUT | PRU, CH_2 */ + 0x0ec 0x25 /* lcd_ac_bias_en.pr1_pru1_pru_r30_11, MODE5 | OUTPUT | PRU, CH_3 */ + 0x0e4 0x25 /* lcd_hsync.pr1_pru1_pru_r30_9, MODE5 | OUTPUT | PRU, CH_4 */ + 0x0bc 0x25 /* lcd_data7.pr1_pru1_pru_r30_7, MODE5 | OUTPUT | PRU, CH_5 */ + 0x0b8 0x25 /* lcd_data6.pr1_pru1_pru_r30_6, MODE5 | OUTPUT | PRU, CH_6 */ + 0x0b4 0x25 /* lcd_data5.pr1_pru1_pru_r30_5, MODE5 | OUTPUT | PRU, CH_7 */ + 0x0b0 0x25 /* lcd_data4.pr1_pru1_pru_r30_4, MODE5 | OUTPUT | PRU, CH_8 */ + 0x0ac 0x25 /* lcd_data3.pr1_pru1_pru_r30_3, MODE5 | OUTPUT | PRU, CH_9 */ + 0x0a8 0x25 /* lcd_data2.pr1_pru1_pru_r30_2, MODE5 | OUTPUT | PRU, CH_10 */ + 0x0a4 0x25 /* lcd_data1.pr1_pru1_pru_r30_1, MODE5 | OUTPUT | PRU, CH_11 */ + 0x0a0 0x25 /* lcd_data0.pr1_pru1_pru_r30_0, MODE5 | OUTPUT | PRU, CH_12 */ + + BONE_P8_12 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 TRIG */ + BONE_P8_16 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* HC-SR04 ECHO */ + + BONE_P9_25 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* MPU9250 INT */ + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + /* P9_22: spi0_sclk.spi0_sclk */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_21: spi0_d0.spi0_d0 */ + BONE_P9_21 (PIN_INPUT_PULLUP | MUX_MODE0) + /* P9_18: spi0_d1.spi0_d1 */ + BONE_P9_18 (PIN_OUTPUT_PULLUP | MUX_MODE0) + /* P9_17: spi0_cs0.spi0_cs0 */ + BONE_P9_17 (PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + /* P9_31: mcasp0_aclkx.spi1_sclk */ + BONE_P9_31 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_29: mcasp0_fsx.spi1_d0 */ + BONE_P9_29 (PIN_INPUT_PULLUP | MUX_MODE3) + + /* P9_30: mcasp0_axr0.spi1_d1 */ + BONE_P9_30 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_28: mcasp0_ahclkr.spi1_cs0 */ + BONE_P9_28 (PIN_OUTPUT_PULLUP | MUX_MODE3) + + /* P9_19: uart1_rtsn.spi1_cs1 */ +/* BONE_P9_19 (PIN_OUTPUT_PULLUP | MUX_MODE4)*/ + + /* P9_42: ecap0_in_pwm0_out.spi1_cs1 */ + BONE_P9_42A (PIN_OUTPUT_PULLUP | MUX_MODE2) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi0_0 { + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <24000000>; + reg = <0>; + compatible = "spidev"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi1_0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + }; + + spi1_1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <24000000>; + compatible = "spidev"; + }; +}; + +&tscadc { + adc { + ti,adc-channels = <0 1>; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts new file mode 100644 index 0000000..6f16d4c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; + +#include "am335x-bone-argus.dtsi" diff --git b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts new file mode 100644 index 0000000..68ae67c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts new file mode 100644 index 0000000..6d419f7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts new file mode 100644 index 0000000..6d419f7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-overlay.dts new file mode 100644 index 0000000..d8051b6 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-overlay.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi new file mode 100644 index 0000000..94caa22 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <44>; /* Bank1, pin12 */ + dev_name = "/dev/ttyO4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + mmc2_pins_sleep: pinmux_mmc2_pins_sleep { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + uart4_pins_default: pinmux_uart4_pins_default { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT | MUX_MODE6) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + uart4_pins_sleep: pinmux_uart4_pins_sleep { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wpn.uart4_txd */ + >; + }; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc2_pins &wlan_pins>; + pinctrl-1 = <&mmc2_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart4_pins_default>; + pinctrl-1 = <&uart4_pins_sleep>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts new file mode 100644 index 0000000..ec953a9 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +#include "am335x-boneblack-wl1835mod-cape.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index eadbba3..11e4a16 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -8,7 +8,10 @@ /dts-v1/; #include "am33xx.dtsi" +#include "am33xx-es2.dtsi" #include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" +/* #include "am335x-bone-jtag.dtsi" */ / { model = "TI AM335x BeagleBone Black"; @@ -36,32 +39,32 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < - 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ - 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ - 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ - 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ - 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ - 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ >; }; nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { pinctrl-single,pins = < - 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ >; }; }; @@ -90,7 +93,3 @@ }; }; }; - -&rtc { - system-power-controller; -}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts new file mode 100644 index 0000000..c4bb320 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-overlay.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts new file mode 100644 index 0000000..44c872d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-wl1835.dtsi" + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&mmc3 { + status = "okay"; +}; + +&mac { + status = "disabled"; +}; diff --git b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi new file mode 100644 index 0000000..f899a0f --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wl1835.dtsi @@ -0,0 +1,129 @@ + +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + tibt { + compatible = "tibt"; + nshutdown_gpio = <60>; + dev_name = "/dev/ttyS3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x78 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN*/ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x8c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio2_1 gpmc_clk.mmc2_clk */ + 0x88 ( PIN_INPUT_PULLUP | MUX_MODE3) /* gpio2_0 gpmc_csn3.mmc2_cmd */ + 0x30 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_12 gpmc_ad12.mmc2_dat0 */ + 0x34 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_13 gpmc_ad13.mmc2_dat1 */ + 0x38 ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_14 gpmc_ad14.mmc2_dat2 */ + 0x3c ( PIN_INPUT_PULLUP | MUX_MODE3 ) /* gpio1_15 gpmc_ad15.mmc2_dat3 */ + >; + }; + + mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio2_1 gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio2_0 gpmc_csn3.mmc2_cmd */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_12 gpmc_ad12.mmc2_dat0 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_13 gpmc_ad13.mmc2_dat1 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_14 gpmc_ad14.mmc2_dat2 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpio1_15 gpmc_ad15.mmc2_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/ + >; + }; + + uart3_pins_default: pinmux_uart3_pins_default { + pinctrl-single,pins = < + 0x134 ( PIN_INPUT_PULLUP | MUX_MODE1 ) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 ( PIN_OUTPUT_PULLDOWN | MUX_MODE1 ) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 ( PIN_INPUT | MUX_MODE3 ) /* (M17) mdio_data.uart3_ctsn */ + 0x14c ( PIN_OUTPUT_PULLDOWN | MUX_MODE3 ) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; + + uart3_pins_sleep: pinmux_uart3_pins_sleep { + pinctrl-single,pins = < + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (L17) gmii1_rxd3.uart3_rxd */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (L16) gmii1_rxd2.uart3_txd */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (M17) mdio_data.uart3_ctsn */ + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; +}; + +&mmc3 { + dmas = <&edma 12 + &edma 13>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc3_pins &wlan_pins>; + pinctrl-1 = <&mmc3_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&edma { + ti,edma-xbar-event-map = /bits/ 16 <1 12 2 13>; +}; + +&uart3 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart3_pins_default>; + pinctrl-1 = <&uart3_pins_sleep>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index 0f65bda..ef2e6cd 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -8,7 +8,9 @@ /dts-v1/; #include "am33xx.dtsi" +#include "am33xx-es2.dtsi" #include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" / { model = "TI AM335x BeagleBone Green"; @@ -32,22 +34,3 @@ bus-width = <8>; status = "okay"; }; - -&am33xx_pinmux { - uart2_pins: uart2_pins { - pinctrl-single,pins = < - 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ - >; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&rtc { - system-power-controller; -}; diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi new file mode 100644 index 0000000..01f9cde --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + edt_ft5306_ts_pins: pinmux_edt_ft5306_ts_pins { + pinctrl-single,pins = < + /* CAP_TSC gpmc_a1.gpio1_17, INPUT | MODE7 */ + BONE_P9_23 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi new file mode 100644 index 0000000..539409c --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi new file mode 100644 index 0000000..bce6ac5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git b/arch/arm/boot/dts/am335x-olimex-som.dts b/arch/arm/boot/dts/am335x-olimex-som.dts new file mode 100644 index 0000000..2b00ad2 --- /dev/null +++ b/arch/arm/boot/dts/am335x-olimex-som.dts @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-som-common.dtsi" + +/ { + model = "Olimex AM335x SOM"; + compatible = "olimex,am335x-olimex-som", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&am33xx_pinmux { + lcd_pins_default: lcd_pins_default { + pinctrl-single,pins = < + 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ + 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ + 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ + 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ + 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ + 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ + 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ + 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ + 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ + 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ + 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ + 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ + 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ + 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ + 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ + 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ + 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ + 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ + 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ + 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ + 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ + 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ + 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ + 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + >; + }; + + lcd_pins_sleep: lcd_pins_sleep { + pinctrl-single,pins = < + 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data16 */ + 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data17 */ + 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data18 */ + 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data19 */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data20 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data21 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data22 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data23 */ + 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ + 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ + 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ + 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ + 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ + 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ + 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ + 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ + 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ + 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ + 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ + 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ + 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ + 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ + 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ + 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ + /* lcd_vsync.lcd_vsync,OUTPUT | MODE0 */ + 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ + /* lcd_ac_bias_en.lcd_ac_bias_en */ + 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + +}; + +&lcdc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default>; + pinctrl-1 = <&lcd_pins_sleep>; + status = "okay"; + /* display-timings { + 480x272 { + hactive = <480>; + vactive = <272>; + hback-porch = <43>; + hfront-porch = <8>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + };*/ + + display-timings { + native-mode = <&vga1024x768>; + lcd4: 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <40>; + vback-porch = <8>; + vfront-porch = <7>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + }; + lcd7: 800x480 { + clock-frequency = <33300000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <40>; + vback-porch = <23>; + vfront-porch = <20>; + hsync-len = <6>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + }; + lcd10: 1024x600 { + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <160>; + hback-porch = <140>; + vback-porch = <20>; + vfront-porch = <12>; + hsync-len = <20>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + }; + + vga800x600: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hfront-porch = <40>; + hback-porch = <88>; + vfront-porch = <1>; + vback-porch = <23>; + hsync-len = <128>; + vsync-len = <4>; + hsync-active = <0>; + vsync-active = <0>; + }; + vga1024x768: 1024x768 { + clock-frequency = <65000000>; + hactive = <1024>; + hfront-porch = <24>; + hback-porch = <160>; + hsync-len = <136>; + vactive = <768>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi new file mode 100644 index 0000000..4335e39 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi new file mode 100644 index 0000000..02b5bd1 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi new file mode 100644 index 0000000..603f34e --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + + bus-width = <8>; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi new file mode 100644 index 0000000..ed9a0b5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&i2c2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..74ddc12 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; +}; + +/ { + panel { + status = "okay"; + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <0>; + raster-order = <1>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 1024x600 { + clock-frequency = <36000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <1>; + hback-porch = <45>; + hsync-len = <30>; + vback-porch = <22>; + vfront-porch = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi new file mode 100644 index 0000000..f59fa4c --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi new file mode 100644 index 0000000..a25d6cf --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi new file mode 100644 index 0000000..adc89f0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart4 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi new file mode 100644 index 0000000..8b42fb0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart5 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git b/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts new file mode 100644 index 0000000..5eff816 --- /dev/null +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am33xx-es2.dtsi" +#include "am335x-bone-common.dtsi" +#include "am33xx-overlay-edma-fix.dtsi" + +/ { + model = "SanCloud BeagleBone Enhanced"; + compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; + ti,vcc-aux-disable-is-sleep; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&usb_hub_ctrl>; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + usb_hub_ctrl: usb_hub_ctrl { + pinctrl-single,pins = < + 0x144 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + >; + }; + + mpu6050_pins: pinmux_mpu6050_pins { + pinctrl-single,pins = < + 0x168 (PIN_INPUT | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + >; + }; + + lps3331ap_pins: pinmux_lps3331ap_pins { + pinctrl-single,pins = < + 0x6C (PIN_INPUT | MUX_MODE7) /* conf_gpmc_a11.gpio1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + + lps331ap: lps331ap@5C { + compatible = "st,lps331ap"; + reg = <0x5C>; + interrupts = <0>, <1>; + }; + + mpu6050: mpu6050@68 { + compatible = "inv,mpu6050"; + reg = <0x68>; + orientation = <0xff 0 0 0 1 0 0 0 0xff>; + interrupts = <2 1>; + }; +}; + +&rtc { + system-power-controller; +}; diff --git b/arch/arm/boot/dts/am335x-som-common.dtsi b/arch/arm/boot/dts/am335x-som-common.dtsi new file mode 100644 index 0000000..fb4399b --- /dev/null +++ b/arch/arm/boot/dts/am335x-som-common.dtsi @@ -0,0 +1,465 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_fixed>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + ocp { + uart0: serial@44e09000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; + }; + uart1: serial@48022000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + + }; + uart4: serial@481a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; + }; + + epwmss0: epwmss@48300000 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ecap0_pins_default>; + pinctrl-1 = <&ecap0_pins_sleep>; + }; + }; + + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + + i2c0: i2c@44e0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + + tps: tps@24 { + reg = <0x24>; + }; + }; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + dcdc2_fixed: fixedregulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */ + compatible = "regulator-fixed"; + regulator-name = "dcdc2_fixed"; + + regulator-min-microvolt = <1378000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "led1:green:heartbeat"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + label = "led2:red:heartbeat"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@3 { + label = "led3:yello:heartbeat"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led@4 { + label = "bkl"; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 500000 1>; + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <50>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* xdma_event_intr0.gpio0_19 */ + 0x198 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_axr0.gpio3_20 */ + 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_axr1.gpio3_21 */ + 0x1a4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_fsr.gpio3[19], INPUT_PULLDOWN | MODE7 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x168 (PIN_INPUT_PULLUP | MUX_MODE1) + 0x16c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + + 0x040 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a0.gmii2_txen, OUTPUT_PULLDOWN | MODE1 */ + 0x044 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a1.gmii2_rxdv, INPUT_PULLDOWN | MODE1 */ + 0x048 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a2.gmii2_txd3, OUTPUT_PULLDOWN | MODE1 */ + 0x04c (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a3.gmii2_txd2, OUTPUT_PULLDOWN | MODE1 */ + 0x050 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a4.gmii2_txd1, OUTPUT_PULLDOWN | MODE1 */ + 0x054 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gpmc_a5.gmii2_txd0, OUTPUT_PULLDOWN | MODE1 */ + 0x058 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a6.gmii2_txclk, INPUT_PULLDOWN | MODE1 */ + 0x05c (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a7.gmii2_rxclk, INPUT_PULLDOWN | MODE1 */ + 0x060 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a8.gmii2_rxd3, INPUT_PULLDOWN | MODE1 */ + 0x064 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a9.gmii2_rxd2, INPUT_PULLDOWN | MODE1 */ + 0x068 (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a10.gmii2_rxd1, INPUT_PULLDOWN | MODE1 */ + 0x06c (PIN_INPUT_PULLDOWN | MUX_MODE1 ) /* gpmc_a11.gmii2_rxd0, INPUT_PULLDOWN | MODE1 */ + 0x070 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_wait0.gmii2_crs, INPUT_PULLUP | MODE1 */ + 0x074 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_wpn.gmii2_rxer, INPUT_PULLUP | MODE1 */ + 0x078 (PIN_INPUT_PULLUP | MUX_MODE1 ) /* gpmc_ben1.gmii2_col, INPUT_PULLUP | MODE1 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x074 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x078 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0FC (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1A0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; + + ecap0_pins_default: backlight_pins { + pinctrl-single,pins = < + 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + >; + }; + + ecap0_pins_sleep: ecap0_pins_sleep { + pinctrl-single,pins = < + 0x164 (PULL_DISABLE | MUX_MODE7) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + >; + }; + dcan0_default: dcan0_default_pins { + pinctrl-single,pins = < + 0x178 0x0a /* uart1_ctsn.dcan0_tx_mux2, OUTPUT | MODE2 */ + 0x17c 0x2a /* uart1_rtsn.dcan0_rx_mux2, INPUT | MODE2 */ + >; + }; + }; + +&tps { + compatible = "ti,tps65217"; + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + slaves = <2>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; +}; + +&dcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_default>; + status = "okay"; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <0 1 2 3>; + }; +}; diff --git b/arch/arm/boot/dts/am33xx-es2.dtsi b/arch/arm/boot/dts/am33xx-es2.dtsi new file mode 100644 index 0000000..6e252d4 --- /dev/null +++ b/arch/arm/boot/dts/am33xx-es2.dtsi @@ -0,0 +1,34 @@ +/* + * Device Tree Source for AM33XX SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + cpus { + cpu@0 { + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 1000000 1325000 + 800000 1300000 + 600000 1112000 + 300000 969000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; +}; diff --git b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi new file mode 100644 index 0000000..88c8d04 --- /dev/null +++ b/arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for AM33xx Overlay EDMA fixes + * + * Copyright (C) 2015 Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&mcasp0 { + status = "okay"; +}; + +&mcasp1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index cfa8701..6520a20 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -90,7 +90,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -458,6 +458,17 @@ ti,timer-pwm; }; + pruss: pruss@4a300000 { + compatible = "ti,pruss-v2"; + ti,hwmods = "pruss"; + ti,deassert-hard-reset = "pruss", "pruss"; + reg = <0x4a300000 0x080000>; + ti,pintc-offset = <0x20000>; + interrupt-parent = <&intc>; + status = "disabled"; + interrupts = <20 21 22 23 24 25 26 27>; + }; + rtc: rtc@44e3e000 { compatible = "ti,am3352-rtc", "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; @@ -654,6 +665,15 @@ ti,hwmods = "ehrpwm0"; status = "disabled"; }; + + eqep0: eqep@0x48300180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48300180 0x80>; + interrupt-parent = <&intc>; + interrupts = <79>; + ti,hwmods = "eqep0"; + status = "disabled"; + }; }; epwmss1: epwmss@48302000 { @@ -684,6 +704,15 @@ ti,hwmods = "ehrpwm1"; status = "disabled"; }; + + eqep1: eqep@0x48302180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48302180 0x80>; + interrupt-parent = <&intc>; + interrupts = <88>; + ti,hwmods = "eqep1"; + status = "disabled"; + }; }; epwmss2: epwmss@48304000 { @@ -714,6 +743,15 @@ ti,hwmods = "ehrpwm2"; status = "disabled"; }; + + eqep2: eqep@0x48304180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48304180 0x80>; + interrupt-parent = <&intc>; + interrupts = <89>; + ti,hwmods = "eqep2"; + status = "disabled"; + }; }; mac: ethernet@4a100000 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c2a03c7..ef540dc 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -297,6 +297,13 @@ reg = <0x40d00000 0x100>; }; + dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; diff --git b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts new file mode 100644 index 0000000..37721c1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sabresd-wl1835.dtsi" + +/ { + model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; + compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 4b0ec07..51c517a 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -104,6 +104,11 @@ compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>; }; + + gpu-subsystem { + compatible = "fsl,imx-gpu-subsystem"; + cores = <&gpu_2d>, <&gpu_3d>; + }; }; &gpt { diff --git b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts new file mode 100644 index 0000000..d249240 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2015 Robert Nelson (robertcnelson@gmail.com) + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include + +/ { + model = "Digi ConnectCore-i.MX6 SBC Board"; + compatible = "digi,connectcore/q", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_reset: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usbh1_reset"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <17 0x8>; /* active-low GPIO0_17 */ + + regulators { + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-ccimx6sbc { + pinctrl_hog: hoggrp { + fsl,pins = < + /* da9063*/ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* need to force low for hub reset */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x10b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_reset>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + broken-cd; /* cd & wp, is not wired up on this board */ + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts new file mode 100644 index 0000000..d88d9e2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts @@ -0,0 +1,25 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sabresd-wl1835.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Smart Device Board"; + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 399103b..77d618b 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -153,6 +153,16 @@ status = "disabled"; }; + gpu_vg: gpu@02204000 { + compatible = "vivante,gc"; + reg = <0x02204000 0x4000>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_GPU2D_CORE>; + clock-names = "bus", "core"; + power-domains = <&gpc 1>; + }; + ipu2: ipu@02800000 { #address-cells = <1>; #size-cells = <0>; @@ -225,6 +235,11 @@ compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; }; + + gpu-subsystem { + compatible = "fsl,imx-gpu-subsystem"; + cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>; + }; }; &hdmi { diff --git b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi new file mode 100644 index 0000000..862dfbd --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi @@ -0,0 +1,646 @@ +/* Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include + +/ { + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_audio: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply"; + gpio = <&gpio4 10 0>; + enable-active-high; + }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; + + wlan_en_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO for this board – Bank4, pin7 */ + gpio = <&gpio4 7 0>; + enable-active-high; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + }; + + sound { + compatible = "fsl,imx6q-sabresd-wm8962", + "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + +/* red_led gpio gpio1_2 is used for bt_enable + red { + gpios = <&gpio1 2 0>; + default-state = "on"; + }; +*/ + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <2>; + dev_name = "/dev/ttymxc4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +/* +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 9 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; +*/ + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 0>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio6>; + interrupts = <7 2>; + wakeup-gpios = <&gpio6 7 0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-sabresd { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x13059 // reserve two pins wl8 gpio, this is pulled low at reset for WL_EN + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x13059 // this is for WL_IRQ which driver will configure as an input with a pull down + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x1b0b1 + MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 0>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { + compatible = "fsl,imx21-uart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + /* enable rts/cts usage on uart5 */ + fsl,uart-has-rtscts; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; +/* cd-gpios = <&gpio2 2 0>; */ + wp-gpios = <&gpio2 3 0>; + no-1-8-v; + vmmc-supply = <&wlan_en_reg>; + non-removable; /* non-removable is not a variable, the fact it is */ + /* listed is all that is used by driver */ + cap-power-off-card; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 1211da8..e8fc7d8 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -9,6 +9,8 @@ * */ +#include + / { chosen { stdout-path = &uart2; @@ -17,23 +19,6 @@ memory { reg = <0x10000000 0x40000000>; }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_h1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; - }; }; &fec { @@ -55,8 +40,57 @@ status = "okay"; }; +&i2c3 { // CSI camera (CN11) and LVDS 7 inches touch panel (CN13) + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + ov5640_mipi: ov5640_mipi@3c { + compatible = "ovti,ov5640_mipi"; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "csi_mclk"; + pwn-gpios = <&gpio6 4 GPIO_ACTIVE_LOW>; + rst-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; + csi_id = <0>; + mclk = <24000000>; + mclk_source = <0>; + }; +}; + &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + imx6q-udoo { + pinctrl_hog: hoggrp { + fsl,pins = < + // Internal GPIOs + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x80000000 // 5v enable + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 // Vtt enable + + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x80000000 // Debug UART (J18) + + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 // USB hub reset + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 // USB hub clock + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0xb0b1 // USB OTG select + + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 // SD card power + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 // SD card detect + + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0xb0b1 // SAM3X OTG vbus_en + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x80000000 // SAM3X usb host + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x30b1 // Arduino pinout pin 12 + + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 // LVDS panel on (CN13) + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 // LVDS backlight on (CN13) + + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x1f071 // CSI camera enable (CN11) + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x1f071 // CSI camera reset (CN11) + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x130b0 // CSI master clock (CN11) + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -85,6 +119,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 @@ -92,6 +133,13 @@ >; }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + pinctrl_usbh: usbhgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 @@ -118,12 +166,26 @@ status = "okay"; }; -&usbh1 { +&uart4 { // iMX6-Arduino internal serial port - ttymxc3 pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks 201>; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + hub: usb2415@01 { + compatible = "generic-onboard-device"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh>; + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <2>; + }; }; &usdhc3 { @@ -132,3 +194,11 @@ non-removable; status = "okay"; }; + +&mipi_csi { + status = "okay"; + ipu_id = <0>; + csi_id = <0>; + v_channel = <0>; + lanes = <2>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index ef7fa62..b5d0f58 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio3 13 0>; + bluetooth-wake = <&gpio3 14 0>; + bluetooth-host-wake = <&gpio3 15 0>; + + wifi-ref-on = <&gpio2 29 0>; + wifi-rst-n = <&gpio5 2 0>; + wifi-reg-on = <&gpio1 26 0>; + wifi-host-wake = <&gpio1 29 0>; + wifi-wake = <&gpio1 30 0>; + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; @@ -37,6 +55,5 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 8d893a7..b2097ef 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio5 21 0>; + bluetooth-wake = <&gpio5 30 0>; + bluetooth-host-wake = <&gpio5 20 0>; + + wifi-ref-on = <&gpio5 31 0>; /* Wifi Power Enable */ + wifi-rst-n = <&gpio6 0 0>; /* WIFI_ON reset */ + wifi-reg-on = <&gpio1 26 0>; /* WL_REG_ON */ + wifi-host-wake = <&gpio1 29 0>; /* WL_HOST_WAKE */ + wifi-wake = <&gpio1 30 0>; /* WL_WAKE */ + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index a70a193..2e2247a 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -147,6 +147,27 @@ }; }; + gpu_3d: gpu@00130000 { + compatible = "vivante,gc"; + reg = <0x00130000 0x4000>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, + <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>; + clock-names = "bus", "core", "shader"; + power-domains = <&gpc 1>; + }; + + gpu_2d: gpu@00134000 { + compatible = "vivante,gc"; + reg = <0x00134000 0x4000>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_GPU2D_CORE>; + clock-names = "bus", "core"; + power-domains = <&gpc 1>; + }; + timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; diff --git b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts new file mode 100644 index 0000000..e5853f3 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts @@ -0,0 +1,633 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sl.dtsi" + +/ { + model = "Freescale i.MX6 SoloLite EVK Board"; + compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_aud3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; + + wlan_en_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO for this board – Bank5, pin13 */ + gpio = <&gpio5 13 0>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <134>; // GPIO5_6 The wl8 driver expects gpio to be an integer, so gpio5_6 is (5-1)*32+6=134 + dev_name = "/dev/ttymxc3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 11 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6sl-evk { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 + MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 + MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x13059 // reserve two pins from sd1 for wl8 gpio, this is pulled low at reset for WL_EN + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x13059 // this is for wl_irq which driver will configure as an input with a pull down + >; + }; + + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 + MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 + MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 + MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 + MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 + MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 + >; + }; + + pinctrl_fec_sleep: fecgrp-sleep { + fsl,pins = < + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 + MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010 + MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0 + MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0 + MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0 + MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x13059 // used for HOST_HCI_RX + MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x13059 // used for HOST_HCI_TX + MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x13059 // used for HOST_HCI_RTS, note reversed to TI nomenclature + MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x13059 // used for HOST_HCI_CTS + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x13059 // used for BT_EN + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) /* ROW0, COL0 */ + MATRIX_KEY(0x0, 0x1, KEY_DOWN) /* ROW0, COL1 */ + MATRIX_KEY(0x0, 0x2, KEY_ENTER) /* ROW0, COL2 */ + MATRIX_KEY(0x1, 0x0, KEY_HOME) /* ROW1, COL0 */ + MATRIX_KEY(0x1, 0x1, KEY_RIGHT) /* ROW1, COL1 */ + MATRIX_KEY(0x1, 0x2, KEY_LEFT) /* ROW1, COL2 */ + MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */ + MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */ + >; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + compatible = "fsl,imx21-uart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; + + /* enable rts/cts usage on uart4 */ + fsl,uart-has-rtscts; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio5 0 0>; + wp-gpios = <&gpio4 29 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&wlan_en_reg>; + non-removable; // non-removable is not a variable, the fact it is listed is all that is used by driver + cap-power-off-card; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 73f1e3a..38bb43c 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -205,6 +205,25 @@ >; }; + spi3_pins: pinmux_spi3_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT | MUX_MODE1) /* sdmmc2_clk.mcspi3_clk gpio_130 */ + 0x12a (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_cmd.mcspi3_simo gpio_131 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0.mcspi3_somi gpio_132 */ + 0x130 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat2.mcspi3_cs1 gpio_134 */ + 0x132 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat3.mcspi3_cs0 gpio_135 */ + >; + }; + + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT | MUX_MODE1) /* mcbsp1_clkr.mcspi4_clk gpio_156 */ + 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_dx.mcspi4_simo gpio_158 */ + 0x162 (PIN_INPUT_PULLUP | MUX_MODE1) /* mcbsp1_dr.mcspi4_somi gpio_159 */ + 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_fsx.mcspi4_cs0 gpio_161 */ + >; + }; + hsusb2_pins: pinmux_hsusb2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ @@ -310,6 +329,36 @@ status = "disabled"; }; +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <48000000>; + }; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + status = "okay"; + + spidev2: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; +}; + &twl_gpio { ti,use-leds; /* pullups: BIT(1) */ diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 274c2c4..e809ccf 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -271,9 +271,18 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; }; }; +&i2c2 { + clock-frequency = <400000>; +}; + #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 133f1b7..072f0a0 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -10,6 +10,18 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 18d0966..d0b778c 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -460,16 +460,6 @@ }; }; -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - &mcbsp1 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; diff --git b/arch/arm/boot/dts/omap4-panda-es-b3.dts b/arch/arm/boot/dts/omap4-panda-es-b3.dts new file mode 100644 index 0000000..2f1dabc --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-es-b3.dts @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4460.dtsi" +#include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; +}; + +&omap4_pmx_core { + led_gpio_pins: gpio_led_pmx { + pinctrl-single,pins = < + 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + >; + }; +}; + +&led_wkgpio_pins { + pinctrl-single,pins = < + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; +}; + +&leds { + pinctrl-0 = < + &led_gpio_pins + &led_wkgpio_pins + >; + + heartbeat { + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + }; + mmc { + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&gpio1 { + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 2f1dabc..206b523 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -15,6 +15,18 @@ compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; }; +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES"; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index a0e28b2..3ee41ef 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -14,3 +14,15 @@ model = "TI OMAP4 PandaBoard"; compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index f0bdc41..184f98e 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -501,11 +501,13 @@ &emif1 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &emif2 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &keypad { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 5a206c1..6fa8b82 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -681,6 +681,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; emif2: emif@4d000000 { @@ -693,6 +694,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; ocp2scp@4a0ad000 { diff --git b/arch/arm/configs/rcn-ee_defconfig b/arch/arm/configs/rcn-ee_defconfig new file mode 100644 index 0000000..63421fa --- /dev/null +++ b/arch/arm/configs/rcn-ee_defconfig @@ -0,0 +1,2936 @@ +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_XZ=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +# CONFIG_USELIB is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_KMEM=y +CONFIG_CGROUP_PERF=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_BLK_CGROUP=y +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_NAMESPACES=y +CONFIG_USER_NS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_BPF_SYSCALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_CC_STACKPROTECTOR_STRONG=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_BLK_DEV_THROTTLING=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_KARMA_PARTITION=y +CONFIG_CFQ_GROUP_IOSCHED=y +CONFIG_ARCH_MXC=y +CONFIG_SOC_IMX50=y +CONFIG_SOC_IMX51=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SX=y +CONFIG_SOC_IMX6UL=y +CONFIG_SOC_IMX7D=y +CONFIG_SOC_LS1021A=y +CONFIG_SOC_VF610=y +CONFIG_WAND_RFKILL=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_NOKIA_RX51 is not set +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_TEGRA_124_SOC=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_430973=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_REALLOC_ENABLE_AUTO=y +CONFIG_PCI_STUB=m +CONFIG_PCI_IMX6=y +CONFIG_PCI_TEGRA=y +CONFIG_PCIEAER_INJECT=m +CONFIG_SMP=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_KSM=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_ZSWAP=y +CONFIG_ZBUD=y +CONFIG_ZSMALLOC=m +CONFIG_SECCOMP=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_KEXEC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPUFREQ_DT=y +CONFIG_ARM_IMX6Q_CPUFREQ=y +# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set +CONFIG_QORIQ_CPUFREQ=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_BINFMT_MISC=m +CONFIG_HIBERNATION=y +CONFIG_PM_AUTOSLEEP=y +CONFIG_PM_WAKELOCKS=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +CONFIG_APM_EMULATION=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_NET_IPVTI=m +CONFIG_NET_FOU_IP_TUNNELS=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +CONFIG_TCP_CONG_CDG=m +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_IPV6_ILA=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETLABEL=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_GLUE_CT=y +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_INET=m +CONFIG_NFT_EXTHDR=m +CONFIG_NFT_META=m +CONFIG_NFT_CT=m +CONFIG_NFT_RBTREE=m +CONFIG_NFT_HASH=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_COMPAT=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_OVF=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_PE_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_DUP_IPV4=m +CONFIG_NF_TABLES_ARP=m +CONFIG_NF_LOG_ARP=m +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_NET_DCCPPROBE=m +CONFIG_NET_SCTPPROBE=m +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +CONFIG_TIPC=m +CONFIG_TIPC_MEDIA_IB=y +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +CONFIG_LLC2=m +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_PHONET=m +CONFIG_6LOWPAN=m +CONFIG_IEEE802154=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_MAC802154=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=m +CONFIG_NET_CLS_BPF=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_EMATCH_CANID=m +CONFIG_NET_EMATCH_IPSET=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +CONFIG_NET_ACT_CONNMARK=m +CONFIG_NET_CLS_IND=y +CONFIG_DCB=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y +CONFIG_OPENVSWITCH=m +CONFIG_NETLINK_MMAP=y +CONFIG_NETLINK_DIAG=m +CONFIG_NET_MPLS_GSO=y +CONFIG_MPLS_ROUTING=m +CONFIG_MPLS_IPTUNNEL=m +CONFIG_HSR=m +CONFIG_CGROUP_NET_PRIO=y +CONFIG_BPF_JIT=y +CONFIG_NET_PKTGEN=m +CONFIG_NET_DROP_MONITOR=m +CONFIG_CAN=m +CONFIG_CAN_VCAN=m +CONFIG_CAN_SLCAN=m +CONFIG_CAN_SUN4I=m +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_ISA=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_PEAK_PCI=m +CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_CAN_MCP251X=m +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_GS_USB=m +CONFIG_CAN_KVASER_USB=m +CONFIG_CAN_PEAK_USB=m +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_SOFTING=m +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_6LOWPAN=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIUART_QCA=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +CONFIG_BT_WILINK=m +CONFIG_RXKAD=m +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_MAC80211_MESH=y +CONFIG_WIMAX=m +CONFIG_RFKILL_INPUT=y +CONFIG_NET_9P=m +CONFIG_NET_9P_VIRTIO=m +CONFIG_NET_9P_RDMA=m +CONFIG_NFC=m +CONFIG_NFC_DIGITAL=m +CONFIG_NFC_NCI=m +CONFIG_NFC_NCI_SPI=m +CONFIG_NFC_HCI=m +CONFIG_NFC_SHDLC=y +CONFIG_NFC_PN533=m +CONFIG_NFC_WILINK=m +CONFIG_NFC_SIM=m +CONFIG_NFC_PORT100=m +CONFIG_NFC_PN544_I2C=m +CONFIG_NFC_MICROREAD_I2C=m +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_EXTRA_FIRMWARE="am335x-bone-scale-data.bin am335x-evm-scale-data.bin am43x-evm-scale-data.bin" +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=24 +CONFIG_OMAP_OCP2SCP=y +CONFIG_VEXPRESS_CONFIG=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=m +CONFIG_MTD_AR7_PARTS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +CONFIG_RFD_FTL=m +CONFIG_SSFDC=m +CONFIG_MTD_OOPS=m +CONFIG_MTD_SWAP=m +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_INTEL_VR_NOR=m +CONFIG_MTD_PLATRAM=m +CONFIG_MTD_DATAFLASH=m +CONFIG_MTD_M25P80=m +CONFIG_MTD_SST25L=m +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC_BCH=y +CONFIG_MTD_NAND_OMAP2=m +CONFIG_MTD_NAND_RICOH=m +CONFIG_MTD_NAND_CAFE=m +CONFIG_MTD_NAND_NANDSIM=m +CONFIG_MTD_NAND_GPMI_NAND=m +CONFIG_MTD_NAND_MXC=m +CONFIG_MTD_NAND_SUNXI=m +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_OMAP2=m +CONFIG_MTD_ONENAND_2X_PROGRAM=y +CONFIG_MTD_LPDDR=m +CONFIG_MTD_SPI_NOR=m +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_BLOCK=y +CONFIG_OF_CONFIGFS=y +CONFIG_BLK_DEV_NULL_BLK=m +CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m +CONFIG_ZRAM=m +CONFIG_ZRAM_LZ4_COMPRESS=y +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_DRBD=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=m +CONFIG_BLK_DEV_RBD=m +CONFIG_BLK_DEV_NVME=m +CONFIG_AD525X_DPOT=m +CONFIG_AD525X_DPOT_I2C=m +CONFIG_AD525X_DPOT_SPI=m +CONFIG_SGI_IOC4=m +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1780=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +CONFIG_HMC6352=m +CONFIG_DS1682=m +CONFIG_TI_DAC7512=m +CONFIG_BONE_CAPEMGR=y +CONFIG_TIEQEP=m +CONFIG_C2PORT=m +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93XX46=m +CONFIG_TI_ST=m +CONFIG_SENSORS_LIS3_SPI=m +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_CAPE_BONE_ARGUS=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_ISCSI_TCP=m +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2X_FCOE=m +CONFIG_BE2ISCSI=m +CONFIG_SCSI_HPSA=m +CONFIG_SCSI_3W_SAS=m +CONFIG_SCSI_ACARD=m +CONFIG_SCSI_MVSAS=m +# CONFIG_SCSI_MVSAS_DEBUG is not set +CONFIG_SCSI_MVUMI=m +CONFIG_SCSI_ADVANSYS=m +CONFIG_SCSI_ESAS2R=m +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_UFSHCD=m +CONFIG_SCSI_UFSHCD_PCI=m +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +CONFIG_FCOE=m +CONFIG_SCSI_SNIC=m +CONFIG_SCSI_DMX3191D=m +CONFIG_SCSI_STEX=m +CONFIG_SCSI_LPFC=m +CONFIG_SCSI_AM53C974=m +CONFIG_SCSI_WD719X=m +CONFIG_SCSI_PMCRAID=m +CONFIG_SCSI_PM8001=m +CONFIG_SCSI_BFA_FC=m +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_CHELSIO_FCOE=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_ATA=y +CONFIG_SATA_AHCI=m +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_IMX=y +CONFIG_AHCI_SUNXI=y +CONFIG_AHCI_TEGRA=y +CONFIG_AHCI_QORIQ=y +CONFIG_SATA_ACARD_AHCI=m +CONFIG_SATA_SIL24=m +CONFIG_PDC_ADMA=m +CONFIG_SATA_QSTOR=m +CONFIG_SATA_SX4=m +CONFIG_ATA_PIIX=m +CONFIG_SATA_MV=m +CONFIG_SATA_NV=m +CONFIG_SATA_PROMISE=m +CONFIG_SATA_SIL=m +CONFIG_SATA_SIS=m +CONFIG_SATA_SVW=m +CONFIG_SATA_ULI=m +CONFIG_SATA_VIA=m +CONFIG_SATA_VITESSE=m +CONFIG_PATA_ARTOP=m +CONFIG_PATA_ATP867X=m +CONFIG_PATA_CMD64X=m +CONFIG_PATA_IMX=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_IT821X=m +CONFIG_PATA_JMICRON=m +CONFIG_PATA_MARVELL=m +CONFIG_PATA_NINJA32=m +CONFIG_PATA_RDC=m +CONFIG_PATA_SCH=m +CONFIG_PATA_TOSHIBA=m +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +CONFIG_ATA_GENERIC=m +CONFIG_MD=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BCACHE=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +CONFIG_DM_LOG_WRITES=m +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +CONFIG_TCM_USER2=m +CONFIG_LOOPBACK_TARGET=m +CONFIG_TCM_FC=m +CONFIG_ISCSI_TARGET=m +CONFIG_SBP_TARGET=m +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +CONFIG_FUSION_SAS=m +CONFIG_FUSION_CTL=m +CONFIG_FIREWIRE=m +CONFIG_FIREWIRE_OHCI=m +CONFIG_FIREWIRE_SBP2=m +CONFIG_FIREWIRE_NET=m +CONFIG_FIREWIRE_NOSY=m +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_IPVLAN=m +CONFIG_VXLAN=m +CONFIG_GENEVE=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_ATM_DUMMY=m +CONFIG_ATM_NICSTAR=m +CONFIG_ATM_NICSTAR_USE_SUNI=y +CONFIG_ATM_NICSTAR_USE_IDT77105=y +CONFIG_ATM_IA=m +CONFIG_ATM_FORE200E=m +CONFIG_ATM_SOLOS=m +CONFIG_TYPHOON=m +CONFIG_ADAPTEC_STARFIRE=m +CONFIG_ET131X=m +CONFIG_SUN4I_EMAC=y +CONFIG_ACENIC=m +CONFIG_PCNET32=m +# CONFIG_NET_VENDOR_ARC is not set +CONFIG_ATL2=m +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_ALX=m +CONFIG_TIGON3=m +CONFIG_BNX2X=m +CONFIG_BNA=m +CONFIG_CHELSIO_T1=m +CONFIG_CHELSIO_T1_1G=y +CONFIG_CHELSIO_T4_DCB=y +CONFIG_CHELSIO_T4VF=m +CONFIG_ENIC=m +CONFIG_NET_TULIP=y +CONFIG_DE2104X=m +CONFIG_TULIP=m +CONFIG_TULIP_NAPI=y +CONFIG_TULIP_NAPI_HW_MITIGATION=y +CONFIG_WINBOND_840=m +CONFIG_DM9102=m +CONFIG_ULI526X=m +CONFIG_DL2K=m +CONFIG_SUNDANCE=m +CONFIG_S2IO=m +CONFIG_VXGE=m +CONFIG_E100=m +CONFIG_E1000=m +CONFIG_E1000E=m +CONFIG_IGB=m +CONFIG_IGBVF=m +CONFIG_IXGB=m +CONFIG_IXGBE=m +CONFIG_IXGBE_VXLAN=y +CONFIG_IXGBE_DCB=y +CONFIG_IXGBEVF=m +CONFIG_I40E=m +CONFIG_I40E_VXLAN=y +CONFIG_I40E_DCB=y +CONFIG_I40E_FCOE=y +CONFIG_I40EVF=m +CONFIG_JME=m +CONFIG_SKGE=m +CONFIG_SKGE_GENESIS=y +CONFIG_SKY2=m +CONFIG_MLX4_EN=m +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y +CONFIG_KS8851=m +CONFIG_KSZ884X_PCI=m +CONFIG_ENC28J60=m +CONFIG_ENCX24J600=m +CONFIG_MYRI10GE=m +CONFIG_FEALNX=m +CONFIG_NATSEMI=m +CONFIG_NS83820=m +CONFIG_NE2K_PCI=m +CONFIG_HAMACHI=m +CONFIG_YELLOWFIN=m +CONFIG_QLA3XXX=m +CONFIG_QLCNIC=m +CONFIG_QLCNIC_VXLAN=y +CONFIG_QLGE=m +CONFIG_NETXEN_NIC=m +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_TUNE_TWISTER=y +CONFIG_8139TOO_8129=y +CONFIG_R8169=m +CONFIG_R6040=m +CONFIG_SC92031=m +CONFIG_SIS190=m +CONFIG_SFC=m +CONFIG_SMC91X=m +CONFIG_EPIC100=m +CONFIG_SMC911X=m +CONFIG_SMSC911X=m +CONFIG_SMSC9420=m +CONFIG_STMMAC_ETH=y +CONFIG_CASSINI=m +CONFIG_NIU=m +CONFIG_TEHUTI=m +CONFIG_TI_DAVINCI_EMAC=y +CONFIG_TI_CPSW=y +CONFIG_TI_CPTS=y +CONFIG_TLAN=m +CONFIG_FDDI=y +CONFIG_DEFXX=m +CONFIG_SKFP=m +CONFIG_AT803X_PHY=m +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=m +CONFIG_BCM87XX_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=y +CONFIG_DP83848_PHY=y +CONFIG_DP83867_PHY=m +CONFIG_FIXED_PHY=m +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_NET_DRIVERS=m +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9700=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_USB_NET_CH9200=m +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_AT76C50X_USB=m +CONFIG_USB_ZD1201=m +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_ADM8211=m +CONFIG_RTL8180=m +CONFIG_RTL8187=m +CONFIG_MAC80211_HWSIM=m +CONFIG_MWL8K=m +CONFIG_ATH_CARDS=m +CONFIG_ATH5K=m +CONFIG_ATH9K=m +CONFIG_ATH9K_HTC=m +CONFIG_CARL9170=m +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m +CONFIG_ATH6KL_USB=m +CONFIG_AR5523=m +CONFIG_WIL6210=m +CONFIG_ATH10K=m +CONFIG_ATH10K_PCI=m +CONFIG_WCN36XX=m +CONFIG_B43=m +CONFIG_B43_SDIO=y +CONFIG_B43LEGACY=m +CONFIG_BRCMSMAC=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_USB=y +CONFIG_BRCMFMAC_PCIE=y +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW2200_PROMISCUOUS=y +CONFIG_IPW2200_QOS=y +CONFIG_IWLWIFI=m +CONFIG_IWLMVM=m +# CONFIG_IWLWIFI_DEVICE_TRACING is not set +CONFIG_IWL4965=m +CONFIG_IWL3945=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_LIBERTAS_MESH=y +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_PCI=m +CONFIG_RT2X00=m +CONFIG_RT2400PCI=m +CONFIG_RT2500PCI=m +CONFIG_RT61PCI=m +CONFIG_RT2800PCI=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_WL_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_RTL8192CE=m +CONFIG_RTL8192SE=m +CONFIG_RTL8192DE=m +CONFIG_RTL8723AE=m +CONFIG_RTL8723BE=m +CONFIG_RTL8188EE=m +CONFIG_RTL8192EE=m +CONFIG_RTL8821AE=m +CONFIG_RTL8192CU=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8XXXU=m +CONFIG_WL_TI=y +CONFIG_WL1251=m +CONFIG_WL1251_SPI=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_ZD1211RW=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m +CONFIG_RSI_91X=m +# CONFIG_RSI_SDIO is not set +CONFIG_WIMAX_I2400M_USB=m +CONFIG_IEEE802154_FAKELB=m +CONFIG_IEEE802154_AT86RF230=m +CONFIG_IEEE802154_MRF24J40=m +CONFIG_IEEE802154_CC2520=m +CONFIG_IEEE802154_ATUSB=m +CONFIG_INPUT_SPARSEKMAP=m +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=m +CONFIG_KEYBOARD_ADP5588=m +CONFIG_KEYBOARD_ADP5589=m +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_LKKBD=m +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_GPIO_POLLED=m +CONFIG_KEYBOARD_TCA6416=m +CONFIG_KEYBOARD_TCA8418=m +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_LM8333=m +CONFIG_KEYBOARD_MAX7359=m +CONFIG_KEYBOARD_MCS=m +CONFIG_KEYBOARD_MPR121=m +CONFIG_KEYBOARD_SNVS_PWRKEY=m +CONFIG_KEYBOARD_IMX=m +CONFIG_KEYBOARD_NEWTON=m +CONFIG_KEYBOARD_TEGRA=m +CONFIG_KEYBOARD_OPENCORES=m +CONFIG_KEYBOARD_SAMSUNG=m +CONFIG_KEYBOARD_STOWAWAY=m +CONFIG_KEYBOARD_SUNKBD=m +CONFIG_KEYBOARD_SUN4I_LRADC=m +CONFIG_KEYBOARD_OMAP4=m +CONFIG_KEYBOARD_TWL4030=m +CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_CAP11XX=m +CONFIG_KEYBOARD_BCM=m +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_VSXXXAA=m +CONFIG_MOUSE_GPIO=m +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +CONFIG_JOYSTICK_IFORCE_USB=y +CONFIG_JOYSTICK_IFORCE_232=y +CONFIG_JOYSTICK_WARRIOR=m +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_AS5011=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_SERIAL_WACOM4=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_AD7877=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_AD7879_I2C=m +CONFIG_TOUCHSCREEN_AD7879_SPI=m +CONFIG_TOUCHSCREEN_AR1021_I2C=m +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_AUO_PIXCIR=m +CONFIG_TOUCHSCREEN_BU21013=m +CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m +CONFIG_TOUCHSCREEN_CY8CTMG110=m +CONFIG_TOUCHSCREEN_CYTTSP_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP_I2C=m +CONFIG_TOUCHSCREEN_CYTTSP_SPI=m +CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m +CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m +CONFIG_TOUCHSCREEN_DA9052=m +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_HAMPSHIRE=m +CONFIG_TOUCHSCREEN_EETI=m +CONFIG_TOUCHSCREEN_EGALAX=m +CONFIG_TOUCHSCREEN_FT6236=m +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_GOODIX=m +CONFIG_TOUCHSCREEN_ILI210X=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELAN=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_WACOM_I2C=m +CONFIG_TOUCHSCREEN_MAX11801=m +CONFIG_TOUCHSCREEN_MCS5000=m +CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_IMX6UL_TSC=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m +CONFIG_TOUCHSCREEN_PIXCIR=m +CONFIG_TOUCHSCREEN_WDT87XX_I2C=m +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_MC13783=m +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_TSC_SERIO=m +CONFIG_TOUCHSCREEN_TSC2004=m +CONFIG_TOUCHSCREEN_TSC2005=m +CONFIG_TOUCHSCREEN_TSC2007=m +CONFIG_TOUCHSCREEN_ST1232=m +CONFIG_TOUCHSCREEN_SUN4I=m +CONFIG_TOUCHSCREEN_SUR40=m +CONFIG_TOUCHSCREEN_SX8654=m +CONFIG_TOUCHSCREEN_TPS6507X=m +CONFIG_TOUCHSCREEN_ZFORCE=m +CONFIG_TOUCHSCREEN_ROHM_BU21023=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AD714X=m +CONFIG_INPUT_BMA150=m +CONFIG_INPUT_E3X0_BUTTON=m +CONFIG_INPUT_MC13783_PWRBUTTON=m +CONFIG_INPUT_MMA8450=m +CONFIG_INPUT_MPU3050=m +CONFIG_INPUT_GP2A=m +CONFIG_INPUT_GPIO_TILT_POLLED=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_KXTJ9=m +CONFIG_INPUT_KXTJ9_POLLED_MODE=y +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_REGULATOR_HAPTIC=m +CONFIG_INPUT_TPS65218_PWRBUTTON=y +CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_TWL4030_VIBRA=y +CONFIG_INPUT_TWL6040_VIBRA=y +CONFIG_INPUT_UINPUT=y +CONFIG_INPUT_PALMAS_PWRBUTTON=y +CONFIG_INPUT_PCF8574=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +CONFIG_INPUT_DA9052_ONKEY=m +CONFIG_INPUT_DA9055_ONKEY=m +CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_IMS_PCU=m +CONFIG_INPUT_CMA3000=m +CONFIG_INPUT_CMA3000_I2C=m +CONFIG_INPUT_DRV260X_HAPTICS=m +CONFIG_INPUT_DRV2667_HAPTICS=m +CONFIG_SERIO_AMBAKMI=m +CONFIG_SERIO_ALTERA_PS2=m +CONFIG_SERIO_SUN4I_PS2=m +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_NOZOMI=m +CONFIG_N_GSM=m +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_OMAP=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_RP2=m +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_TCG_TPM=m +CONFIG_TCG_TIS_I2C_ATMEL=m +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=m +CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_MUX_PINCTRL=y +CONFIG_I2C_ISCH=m +CONFIG_I2C_GPIO=y +CONFIG_I2C_IMX=y +CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OCORES=m +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_RK3X=y +CONFIG_I2C_SIMTEC=m +CONFIG_I2C_SUN6I_P2WI=y +CONFIG_I2C_TEGRA=y +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_DLN2=m +CONFIG_I2C_ROBOTFUZZ_OSIF=m +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m +CONFIG_SPI=y +CONFIG_SPI_DLN2=m +CONFIG_SPI_GPIO=m +CONFIG_SPI_IMX=m +CONFIG_SPI_OMAP24XX=m +CONFIG_SPI_TI_QSPI=m +CONFIG_SPI_PL022=m +CONFIG_SPI_ROCKCHIP=m +CONFIG_SPI_SUN4I=m +CONFIG_SPI_SUN6I=m +CONFIG_SPI_TEGRA114=m +CONFIG_SPI_TEGRA20_SFLASH=m +CONFIG_SPI_TEGRA20_SLINK=m +CONFIG_SPI_SPIDEV=m +CONFIG_HSI=m +CONFIG_OMAP_SSI=m +CONFIG_NOKIA_MODEM=m +CONFIG_CMT_SPEECH=m +CONFIG_SSI_PROTOCOL=m +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_GPIO=m +CONFIG_PINCTRL_AS3722=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_TI_IODELAY=y +CONFIG_PINCTRL_PALMAS=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_SYSCON=y +CONFIG_GPIO_ADP5588=m +CONFIG_GPIO_ADNP=m +CONFIG_GPIO_MAX7300=m +CONFIG_GPIO_MAX732X=m +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_SX150X=y +CONFIG_GPIO_DA9052=y +CONFIG_GPIO_DA9055=y +CONFIG_GPIO_DLN2=m +CONFIG_GPIO_PALMAS=y +CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_TWL6040=y +CONFIG_GPIO_74X164=m +CONFIG_GPIO_MAX7301=m +CONFIG_GPIO_MC33880=m +CONFIG_GPIO_MCP23S08=m +CONFIG_GPIO_VIPERBOARD=m +CONFIG_W1=y +CONFIG_W1_MASTER_MATROX=m +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +CONFIG_W1_MASTER_MXC=m +CONFIG_W1_MASTER_DS1WM=m +CONFIG_W1_MASTER_GPIO=m +CONFIG_HDQ_MASTER_OMAP=m +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2408=m +CONFIG_W1_SLAVE_DS2413=m +CONFIG_W1_SLAVE_DS2406=m +CONFIG_W1_SLAVE_DS2423=m +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +CONFIG_W1_SLAVE_DS2433_CRC=y +CONFIG_W1_SLAVE_DS2760=m +CONFIG_W1_SLAVE_DS2780=m +CONFIG_W1_SLAVE_DS2781=m +CONFIG_W1_SLAVE_DS28E04=m +CONFIG_W1_SLAVE_BQ27000=m +CONFIG_GENERIC_ADC_BATTERY=m +CONFIG_BATTERY_BQ27XXX=m +CONFIG_BATTERY_DA9052=m +CONFIG_AXP288_FUEL_GAUGE=m +CONFIG_BATTERY_RX51=m +CONFIG_CHARGER_ISP1704=m +CONFIG_CHARGER_GPIO=m +CONFIG_CHARGER_BQ2415X=m +CONFIG_CHARGER_TPS65217=m +CONFIG_AXP20X_POWER=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_AS3722=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_IMX=y +CONFIG_POWER_RESET_RESTART=y +CONFIG_POWER_RESET_VEXPRESS=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y +CONFIG_POWER_AVS=y +CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_SENSORS_AD7314=m +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7310=m +CONFIG_SENSORS_ADT7410=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_DA9052_ADC=m +CONFIG_SENSORS_DA9055=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_MC13783_ADC=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_G762=m +CONFIG_SENSORS_GPIO_FAN=y +CONFIG_SENSORS_HIH6130=m +CONFIG_SENSORS_IIO_HWMON=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_POWR1220=m +CONFIG_SENSORS_LINEAGE=m +CONFIG_SENSORS_LTC2945=m +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4222=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LTC4260=m +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_MAX1111=m +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX197=m +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_MAX6697=m +CONFIG_SENSORS_MAX31790=m +CONFIG_SENSORS_HTU21=m +CONFIG_SENSORS_MCP3021=m +CONFIG_SENSORS_ADCXX=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM70=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LM95234=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m +CONFIG_SENSORS_NCT6775=m +CONFIG_SENSORS_NCT7802=m +CONFIG_SENSORS_NCT7904=m +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +CONFIG_SENSORS_LTC2978_REGULATOR=y +CONFIG_SENSORS_MAX16064=m +CONFIG_SENSORS_MAX20751=m +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +CONFIG_SENSORS_TPS40422=m +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_PWM_FAN=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHTC1=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +CONFIG_SENSORS_EMC2103=m +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +CONFIG_SENSORS_SMM665=m +CONFIG_SENSORS_ADC128D818=m +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_ADS7871=m +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_INA209=m +CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_TMP103=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_TWL4030_MADC=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +CONFIG_THERMAL=y +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_BANG_BANG=y +CONFIG_CPU_THERMAL=y +CONFIG_CLOCK_THERMAL=y +CONFIG_DEVFREQ_THERMAL=y +CONFIG_IMX_THERMAL=y +CONFIG_ROCKCHIP_THERMAL=y +CONFIG_TEGRA_SOCTHERM=y +CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y +CONFIG_OMAP3_THERMAL=y +CONFIG_OMAP4_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_DA9052_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=m +CONFIG_OMAP_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y +CONFIG_IMX2_WDT=y +CONFIG_TEGRA_WATCHDOG=y +CONFIG_MFD_AS3722=y +CONFIG_MFD_AXP20X=y +CONFIG_MFD_DA9052_SPI=y +CONFIG_MFD_DA9052_I2C=y +CONFIG_MFD_DA9055=y +CONFIG_MFD_DA9063=y +CONFIG_MFD_DLN2=y +CONFIG_MFD_MC13XXX_SPI=m +CONFIG_MFD_MC13XXX_I2C=m +CONFIG_MFD_VIPERBOARD=m +CONFIG_MFD_RTSX_PCI=m +CONFIG_MFD_RTSX_USB=m +CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_TI_AM335X_TSCADC=m +CONFIG_MFD_PALMAS=y +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65218=y +CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_USERSPACE_CONSUMER=y +CONFIG_REGULATOR_ACT8865=m +CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_DA9052=y +CONFIG_REGULATOR_DA9063=y +CONFIG_REGULATOR_FAN53555=m +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MC13783=m +CONFIG_REGULATOR_MC13892=m +CONFIG_REGULATOR_MT6311=y +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_PBIAS=y +CONFIG_REGULATOR_PFUZE100=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_S2MPA01=m +CONFIG_REGULATOR_S2MPS11=m +CONFIG_REGULATOR_S5M8767=m +CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65218=y +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_VEXPRESS=m +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y +CONFIG_MEDIA_RC_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_DVB_DYNAMIC_MINORS=y +CONFIG_RC_MAP=m +CONFIG_LIRC=m +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +CONFIG_IR_SHARP_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m +CONFIG_IR_XMP_DECODER=m +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +CONFIG_IR_HIX5HD2=m +CONFIG_IR_IMON=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_IGORPLUGUSB=m +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +CONFIG_RC_LOOPBACK=m +CONFIG_IR_GPIO_CIR=m +CONFIG_IR_SUNXI=m +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STK1135=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TOUPTEK=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +CONFIG_VIDEO_CPIA2=m +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_VIDEO_USBTV=m +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_STK1160_COMMON=m +CONFIG_VIDEO_STK1160_AC97=y +CONFIG_VIDEO_GO7007=m +CONFIG_VIDEO_GO7007_USB=m +CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_RC=y +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_DVB_USB=m +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +CONFIG_DVB_USB_DVBSKY=m +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +CONFIG_DVB_AS102=m +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_V4L2=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_USB_AIRSPY=m +CONFIG_USB_HACKRF=m +CONFIG_USB_MSI2500=m +CONFIG_MEDIA_PCI_SUPPORT=y +CONFIG_VIDEO_SOLO6X10=m +CONFIG_VIDEO_TW68=m +CONFIG_VIDEO_IVTV=m +CONFIG_VIDEO_IVTV_ALSA=m +CONFIG_VIDEO_FB_IVTV=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_CX18_ALSA=m +CONFIG_VIDEO_CX23885=m +CONFIG_MEDIA_ALTERA_CI=m +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_CX88_ALSA=m +CONFIG_VIDEO_CX88_BLACKBIRD=m +CONFIG_VIDEO_CX88_DVB=m +CONFIG_VIDEO_BT848=m +CONFIG_DVB_BT8XX=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_SAA7134_ALSA=m +CONFIG_VIDEO_SAA7134_DVB=m +CONFIG_VIDEO_SAA7164=m +CONFIG_DVB_AV7110=m +CONFIG_DVB_BUDGET_CORE=m +CONFIG_DVB_BUDGET=m +CONFIG_DVB_BUDGET_CI=m +CONFIG_DVB_BUDGET_AV=m +CONFIG_DVB_BUDGET_PATCH=m +CONFIG_DVB_B2C2_FLEXCOP_PCI=m +CONFIG_DVB_PLUTO2=m +CONFIG_DVB_DM1105=m +CONFIG_DVB_PT1=m +CONFIG_DVB_PT3=m +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m +CONFIG_DVB_NGENE=m +CONFIG_DVB_DDBRIDGE=m +CONFIG_DVB_SMIPCIE=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_CAFE_CCIC=m +CONFIG_VIDEO_OMAP2_VOUT=m +CONFIG_VIDEO_OMAP3=m +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_AM437X_VPFE=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y +CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m +CONFIG_VIDEO_TI_VPE=m +CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m +CONFIG_DVB_PLATFORM_DRIVERS=y +CONFIG_DVB_C8SECTPFE=m +CONFIG_SMS_SDIO_DRV=m +CONFIG_RADIO_SI470X=y +CONFIG_USB_SI470X=m +CONFIG_I2C_SI470X=m +CONFIG_RADIO_SI4713=m +CONFIG_USB_SI4713=m +CONFIG_USB_MR800=m +CONFIG_USB_DSBR=m +CONFIG_RADIO_SHARK=m +CONFIG_RADIO_SHARK2=m +CONFIG_USB_KEENE=m +CONFIG_USB_RAREMONO=m +CONFIG_USB_MA901=m +CONFIG_RADIO_TEA5764=m +CONFIG_RADIO_SAA7706H=m +CONFIG_RADIO_TEF6862=m +CONFIG_RADIO_WL1273=m +CONFIG_RADIO_WL128X=m +CONFIG_DVB_FIREDTV=m +CONFIG_SOC_CAMERA_IMX074=m +CONFIG_SOC_CAMERA_MT9M001=m +CONFIG_SOC_CAMERA_MT9M111=m +CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9T112=m +CONFIG_SOC_CAMERA_MT9V022=m +CONFIG_SOC_CAMERA_OV2640=m +CONFIG_SOC_CAMERA_OV5642=m +CONFIG_SOC_CAMERA_OV6650=m +CONFIG_SOC_CAMERA_OV772X=m +CONFIG_SOC_CAMERA_OV9640=m +CONFIG_SOC_CAMERA_OV9740=m +CONFIG_SOC_CAMERA_RJ54N1=m +CONFIG_SOC_CAMERA_TW9910=m +CONFIG_IMX_IPUV3_CORE=y +CONFIG_DRM=y +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_VIA=m +CONFIG_DRM_SAVAGE=m +CONFIG_DRM_VGEM=m +CONFIG_DRM_ROCKCHIP=m +CONFIG_ROCKCHIP_DW_HDMI=m +CONFIG_DRM_UDL=m +CONFIG_DRM_CIRRUS_QEMU=m +CONFIG_DRM_OMAP=y +CONFIG_DRM_TILCDC=y +CONFIG_DRM_QXL=m +CONFIG_DRM_BOCHS=m +CONFIG_DRM_VIRTIO_GPU=m +CONFIG_DRM_TEGRA=m +CONFIG_DRM_DW_HDMI_AHB_AUDIO=m +CONFIG_DRM_IMX=y +CONFIG_DRM_IMX_FB_HELPER=y +CONFIG_DRM_IMX_PARALLEL_DISPLAY=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_LDB=y +CONFIG_DRM_IMX_HDMI=y +CONFIG_DRM_ETNAVIV=m +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_ARMCLCD=y +CONFIG_FB_S3=m +CONFIG_FB_3DFX=m +CONFIG_FB_VT8623=m +CONFIG_FB_ARK=m +CONFIG_FB_PM3=m +CONFIG_FB_SMSCUFX=m +CONFIG_FB_UDL=m +CONFIG_FB_MB862XX=m +# CONFIG_FB_MX3 is not set +CONFIG_FB_SIMPLE=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP5_DSS_HDMI=y +CONFIG_DISPLAY_ENCODER_OPA362=y +CONFIG_DISPLAY_ENCODER_TFP410=y +CONFIG_DISPLAY_ENCODER_TPD12S015=y +CONFIG_DISPLAY_CONNECTOR_DVI=y +CONFIG_DISPLAY_CONNECTOR_HDMI=y +CONFIG_DISPLAY_PANEL_DPI=y +CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m +CONFIG_FB_SSD1307=y +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_GPIO=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SND=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_HRTIMER=m +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_ALOOP=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AD1889=m +CONFIG_SND_OXYGEN=m +CONFIG_SND_CTXFI=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +CONFIG_SND_HDSPM=m +CONFIG_SND_LOLA=m +CONFIG_SND_PCXHR=m +CONFIG_SND_RIPTIDE=m +CONFIG_SND_VIRTUOSO=m +CONFIG_SND_HDA_TEGRA=m +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_INPUT_BEEP=y +CONFIG_SND_HDA_PATCH_LOADER=y +CONFIG_SND_HDA_CODEC_REALTEK=m +CONFIG_SND_HDA_CODEC_ANALOG=m +CONFIG_SND_HDA_CODEC_SIGMATEL=m +CONFIG_SND_HDA_CODEC_VIA=m +CONFIG_SND_HDA_CODEC_HDMI=m +CONFIG_SND_HDA_CODEC_CIRRUS=m +CONFIG_SND_HDA_CODEC_CONEXANT=m +CONFIG_SND_HDA_CODEC_CA0110=m +CONFIG_SND_HDA_CODEC_CA0132=m +CONFIG_SND_HDA_CODEC_CA0132_DSP=y +CONFIG_SND_HDA_CODEC_CMEDIA=m +CONFIG_SND_HDA_CODEC_SI3054=m +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m +CONFIG_SND_DICE=m +CONFIG_SND_OXFW=m +CONFIG_SND_ISIGHT=m +CONFIG_SND_SCS1X=m +CONFIG_SND_FIREWORKS=m +CONFIG_SND_BEBOB=m +CONFIG_SND_SOC=m +CONFIG_SND_EDMA_SOC=m +CONFIG_SND_AM33XX_SOC_EVM=m +CONFIG_SND_IMX_SOC=m +CONFIG_SND_SOC_EUKREA_TLV320=m +CONFIG_SND_SOC_IMX_SGTL5000=m +CONFIG_SND_SOC_IMX_SPDIF=m +CONFIG_SND_SOC_IMX_MC13783=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m +CONFIG_SND_OMAP_SOC_RX51=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +CONFIG_SND_SOC_ROCKCHIP=m +CONFIG_SND_SOC_ROCKCHIP_SPDIF=m +CONFIG_SND_SOC_ROCKCHIP_MAX98090=m +CONFIG_SND_SOC_ROCKCHIP_RT5645=m +CONFIG_SND_SUN4I_CODEC=m +CONFIG_SND_SOC_TEGRA=m +CONFIG_SND_SOC_TLV320AIC31XX=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=y +CONFIG_HID_A4TECH=m +CONFIG_HID_ACRUX=m +CONFIG_HID_ACRUX_FF=y +CONFIG_HID_APPLE=m +CONFIG_HID_APPLEIR=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CORSAIR=m +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CP2112=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GEMBIRD=m +CONFIG_HID_GFRM=m +CONFIG_HID_HOLTEK=m +CONFIG_HOLTEK_FF=y +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LCPOWER=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=y +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=m +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_CUSTOM_SENSOR=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_OTG=y +CONFIG_USB_MON=m +CONFIG_USB_WUSB_CBAF=m +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=m +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_U132_HCD=m +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m +CONFIG_USB_PRINTER=m +CONFIG_USB_TMC=m +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USBIP_CORE=m +CONFIG_USBIP_VHCI_HCD=m +CONFIG_USBIP_HOST=m +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_TUSB6010=y +CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_MUSB_AM35X=y +CONFIG_USB_MUSB_DSPS=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_OMAP=m +# CONFIG_USB_DWC3_PCI is not set +CONFIG_USB_DWC2=m +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_F81232=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_METRO=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +CONFIG_USB_SERIAL_WISHBONE=m +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_DEBUG=m +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +CONFIG_USB_HSIC_USB3503=m +CONFIG_USB_CHAOSKEY=m +CONFIG_USB_ONBOARD_DEVICE=y +CONFIG_AM335X_PHY_USB=y +CONFIG_TWL6030_USB=y +CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_MXS_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_NET2280=m +CONFIG_USB_ETH=y +CONFIG_USB_LED_TRIG=y +CONFIG_UWB=m +CONFIG_UWB_I1480U=m +CONFIG_MMC=y +CONFIG_SDIO_UART=m +CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_TIFM_SD=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +CONFIG_MMC_DW=y +CONFIG_MMC_DW_EXYNOS=m +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +CONFIG_MMC_REALTEK_PCI=m +CONFIG_MMC_REALTEK_USB=m +CONFIG_MMC_SUNXI=y +CONFIG_MMC_TOSHIBA_PCI=m +CONFIG_MEMSTICK=m +CONFIG_MSPRO_BLOCK=m +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_MEMSTICK_REALTEK_PCI=m +CONFIG_MEMSTICK_REALTEK_USB=m +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3530=m +CONFIG_LEDS_LM3642=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_PCA9532_GPIO=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_LP5562=m +CONFIG_LEDS_LP8501=m +CONFIG_LEDS_LP8860=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_PCA963X=m +CONFIG_LEDS_DA9052=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_REGULATOR=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_LT3593=m +CONFIG_LEDS_MC13783=m +CONFIG_LEDS_TCA6507=m +CONFIG_LEDS_TLC591XX=m +CONFIG_LEDS_LM355x=m +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_CXGB3=m +CONFIG_INFINIBAND_CXGB4=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m +CONFIG_INFINIBAND_NES=m +CONFIG_INFINIBAND_OCRDMA=m +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_SRPT=m +CONFIG_INFINIBAND_ISER=m +CONFIG_INFINIBAND_ISERT=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1374_WDT=y +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_HYM8563=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_ISL12057=y +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PALMAS=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_PCF8523=y +CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_PCF85063=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_TPS65910=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_RV8803=m +CONFIG_RTC_DRV_S5M=y +CONFIG_RTC_DRV_M41T93=m +CONFIG_RTC_DRV_M41T94=m +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1343=m +CONFIG_RTC_DRV_DS1347=m +CONFIG_RTC_DRV_DS1390=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_DS3234=m +CONFIG_RTC_DRV_PCF2123=m +CONFIG_RTC_DRV_RX4581=m +CONFIG_RTC_DRV_MCP795=m +CONFIG_RTC_DRV_CMOS=m +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1685_FAMILY=m +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_DA9052=y +CONFIG_RTC_DRV_DA9055=m +CONFIG_RTC_DRV_DA9063=m +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m +CONFIG_RTC_DRV_IMXDI=y +CONFIG_RTC_DRV_OMAP=y +CONFIG_RTC_DRV_PL030=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +CONFIG_RTC_DRV_SUNXI=y +CONFIG_RTC_DRV_MC13XXX=m +CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_MXC=y +CONFIG_RTC_DRV_SNVS=y +CONFIG_RTC_DRV_HID_SENSOR_TIME=m +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_AXI_DMAC=y +CONFIG_DMA_OMAP=y +CONFIG_DMA_SUN6I=y +CONFIG_FSL_EDMA=y +CONFIG_IMX_DMA=y +CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y +CONFIG_PL330_DMA=y +CONFIG_TEGRA20_APB_DMA=y +CONFIG_TI_CPPI41=y +CONFIG_TI_EDMA=y +CONFIG_DW_DMAC=y +CONFIG_ASYNC_TX_DMA=y +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_DMEM_GENIRQ=m +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +CONFIG_UIO_NETX=m +CONFIG_UIO_PRUSS=m +CONFIG_UIO_MF624=m +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO_PCI=m +CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_INPUT=m +CONFIG_VIRTIO_MMIO=m +CONFIG_STAGING=y +CONFIG_RTLLIB=m +CONFIG_R8712U=m +CONFIG_R8188EU=m +CONFIG_ADIS16201=m +CONFIG_ADIS16203=m +CONFIG_ADIS16204=m +CONFIG_ADIS16209=m +CONFIG_ADIS16220=m +CONFIG_ADIS16240=m +CONFIG_LIS3L02DQ=m +CONFIG_SCA3000=m +CONFIG_AD7606=m +CONFIG_AD7606_IFACE_SPI=m +CONFIG_AD7780=m +CONFIG_AD7816=m +CONFIG_AD7192=m +CONFIG_AD7280=m +CONFIG_ADT7316=m +CONFIG_ADT7316_I2C=m +CONFIG_AD7150=m +CONFIG_AD7152=m +CONFIG_AD7746=m +CONFIG_AD9832=m +CONFIG_AD9834=m +CONFIG_ADIS16060=m +CONFIG_AD5933=m +CONFIG_SENSORS_ISL29018=m +CONFIG_SENSORS_ISL29028=m +CONFIG_TSL2583=m +CONFIG_TSL2x7x=m +CONFIG_ADE7753=m +CONFIG_ADE7754=m +CONFIG_ADE7758=m +CONFIG_ADE7759=m +CONFIG_ADE7854=m +CONFIG_AD2S90=m +CONFIG_AD2S1200=m +CONFIG_AD2S1210=m +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +CONFIG_ASHMEM=y +CONFIG_ANDROID_TIMED_GPIO=m +CONFIG_SYNC=y +CONFIG_ION=y +CONFIG_FB_TFT=m +CONFIG_FB_TFT_AGM1264K_FL=m +CONFIG_FB_TFT_BD663474=m +CONFIG_FB_TFT_HX8340BN=m +CONFIG_FB_TFT_HX8347D=m +CONFIG_FB_TFT_HX8353D=m +CONFIG_FB_TFT_HX8357D=m +CONFIG_FB_TFT_ILI9163=m +CONFIG_FB_TFT_ILI9320=m +CONFIG_FB_TFT_ILI9325=m +CONFIG_FB_TFT_ILI9340=m +CONFIG_FB_TFT_ILI9341=m +CONFIG_FB_TFT_ILI9481=m +CONFIG_FB_TFT_ILI9486=m +CONFIG_FB_TFT_PCD8544=m +CONFIG_FB_TFT_RA8875=m +CONFIG_FB_TFT_S6D02A1=m +CONFIG_FB_TFT_S6D1121=m +CONFIG_FB_TFT_SSD1289=m +CONFIG_FB_TFT_SSD1305=m +CONFIG_FB_TFT_SSD1306=m +CONFIG_FB_TFT_SSD1325=m +CONFIG_FB_TFT_SSD1331=m +CONFIG_FB_TFT_SSD1351=m +CONFIG_FB_TFT_ST7735R=m +CONFIG_FB_TFT_ST7789V=m +CONFIG_FB_TFT_TINYLCD=m +CONFIG_FB_TFT_TLS8204=m +CONFIG_FB_TFT_UC1611=m +CONFIG_FB_TFT_UC1701=m +CONFIG_FB_TFT_UPD161704=m +CONFIG_FB_TFT_WATTEROTT=m +CONFIG_FB_FLEX=m +CONFIG_FB_TFT_FBTFT_DEVICE=m +CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_CLK_TWL6040=y +CONFIG_COMMON_CLK_PALMAS=y +CONFIG_HWSPINLOCK_OMAP=y +CONFIG_ARM_TIMER_SP804=y +CONFIG_PL320_MBOX=y +CONFIG_OMAP_IOMMU=y +CONFIG_ROCKCHIP_IOMMU=y +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_ARM_SMMU=y +CONFIG_OMAP_REMOTEPROC=y +CONFIG_WKUP_M3_RPROC=y +CONFIG_ROCKCHIP_PM_DOMAINS=y +CONFIG_SOC_TI=y +CONFIG_DEVFREQ_GOV_PERFORMANCE=y +CONFIG_DEVFREQ_GOV_POWERSAVE=y +CONFIG_DEVFREQ_GOV_USERSPACE=y +CONFIG_ARM_TEGRA_DEVFREQ=y +CONFIG_EXTCON_GPIO=y +CONFIG_EXTCON_PALMAS=y +CONFIG_EXTCON_USB_GPIO=y +CONFIG_TI_EMIF=y +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_CONFIGFS=m +CONFIG_BMA180=m +CONFIG_BMC150_ACCEL=m +CONFIG_HID_SENSOR_ACCEL_3D=m +CONFIG_IIO_ST_ACCEL_3AXIS=m +CONFIG_KXSD9=m +CONFIG_KXCJK1013=m +CONFIG_MMA7455_I2C=m +CONFIG_MMA7455_SPI=m +CONFIG_MMA8452=m +CONFIG_MMA9551=m +CONFIG_MMA9553=m +CONFIG_MXC4005=m +CONFIG_MXC6255=m +CONFIG_STK8312=m +CONFIG_STK8BA50=m +CONFIG_AD7266=m +CONFIG_AD7291=m +CONFIG_AD7298=m +CONFIG_AD7476=m +CONFIG_AD7791=m +CONFIG_AD7793=m +CONFIG_AD7887=m +CONFIG_AD7923=m +CONFIG_AD799X=m +CONFIG_AXP288_ADC=m +CONFIG_CC10001_ADC=m +CONFIG_HI8435=m +CONFIG_INA2XX_ADC=m +CONFIG_IMX7D_ADC=m +CONFIG_MAX1027=m +CONFIG_MAX1363=m +CONFIG_MCP320X=m +CONFIG_MCP3422=m +CONFIG_NAU7802=m +CONFIG_PALMAS_GPADC=m +CONFIG_ROCKCHIP_SARADC=m +CONFIG_TI_ADC081C=m +CONFIG_TI_ADC0832=m +CONFIG_TI_ADC128S052=m +CONFIG_TI_ADS1015=m +CONFIG_TI_ADS8688=m +CONFIG_TI_AM335X_ADC=m +CONFIG_TWL4030_MADC=m +CONFIG_TWL6030_GPADC=m +CONFIG_VF610_ADC=m +CONFIG_VIPERBOARD_ADC=m +CONFIG_AD8366=m +CONFIG_ATLAS_PH_SENSOR=m +CONFIG_IAQCORE=m +CONFIG_VZ89X=m +CONFIG_AD5064=m +CONFIG_AD5360=m +CONFIG_AD5380=m +CONFIG_AD5421=m +CONFIG_AD5446=m +CONFIG_AD5449=m +CONFIG_AD5504=m +CONFIG_AD5624R_SPI=m +CONFIG_AD5686=m +CONFIG_AD5755=m +CONFIG_AD5761=m +CONFIG_AD5764=m +CONFIG_AD5791=m +CONFIG_AD7303=m +CONFIG_M62332=m +CONFIG_MAX517=m +CONFIG_MAX5821=m +CONFIG_MCP4725=m +CONFIG_MCP4922=m +CONFIG_VF610_DAC=m +CONFIG_AD9523=m +CONFIG_ADF4350=m +CONFIG_ADIS16080=m +CONFIG_ADIS16130=m +CONFIG_ADIS16136=m +CONFIG_ADIS16260=m +CONFIG_ADXRS450=m +CONFIG_BMG160=m +CONFIG_HID_SENSOR_GYRO_3D=m +CONFIG_IIO_ST_GYRO_3AXIS=m +CONFIG_ITG3200=m +CONFIG_AFE4403=m +CONFIG_AFE4404=m +CONFIG_MAX30100=m +CONFIG_DHT11=m +CONFIG_HDC100X=m +CONFIG_HTU21=m +CONFIG_SI7005=m +CONFIG_SI7020=m +CONFIG_ADIS16400=m +CONFIG_ADIS16480=m +CONFIG_KMX61=m +CONFIG_INV_MPU6050_I2C=m +CONFIG_INV_MPU6050_SPI=m +CONFIG_ADJD_S311=m +CONFIG_AL3320A=m +CONFIG_APDS9300=m +CONFIG_APDS9960=m +CONFIG_BH1750=m +CONFIG_CM32181=m +CONFIG_CM3232=m +CONFIG_CM3323=m +CONFIG_CM36651=m +CONFIG_GP2AP020A00F=m +CONFIG_ISL29125=m +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +CONFIG_JSA1212=m +CONFIG_RPR0521=m +CONFIG_LTR501=m +CONFIG_OPT3001=m +CONFIG_PA12203001=m +CONFIG_STK3310=m +CONFIG_TCS3414=m +CONFIG_TCS3472=m +CONFIG_SENSORS_TSL2563=m +CONFIG_TSL4531=m +CONFIG_US5182D=m +CONFIG_VCNL4000=m +CONFIG_AK09911=m +CONFIG_BMC150_MAGN=m +CONFIG_MAG3110=m +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +CONFIG_MMC35240=m +CONFIG_IIO_ST_MAGN_3AXIS=m +CONFIG_SENSORS_HMC5843_I2C=m +CONFIG_SENSORS_HMC5843_SPI=m +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m +CONFIG_IIO_INTERRUPT_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m +CONFIG_MCP4531=m +CONFIG_TPL0102=m +CONFIG_BMP280=m +CONFIG_HID_SENSOR_PRESS=m +CONFIG_MPL115_I2C=m +CONFIG_MPL115_SPI=m +CONFIG_MPL3115=m +CONFIG_MS5611=m +CONFIG_MS5611_I2C=m +CONFIG_MS5611_SPI=m +CONFIG_MS5637=m +CONFIG_IIO_ST_PRESS=m +CONFIG_T5403=m +CONFIG_AS3935=m +CONFIG_LIDAR_LITE_V2=m +CONFIG_SX9500=m +CONFIG_MLX90614=m +CONFIG_TMP006=m +CONFIG_TSYS01=m +CONFIG_TSYS02D=m +CONFIG_PWM_IMX=m +CONFIG_PWM_OMAP_DMTIMER=m +CONFIG_PWM_PCA9685=m +CONFIG_PWM_ROCKCHIP=m +CONFIG_PWM_SUN4I=m +CONFIG_PWM_TEGRA=m +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m +CONFIG_PWM_TWL=m +CONFIG_PWM_TWL_LED=m +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=m +CONFIG_TWL4030_USB=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_SUN9I_USB=y +CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_PHY_ROCKCHIP_USB=y +CONFIG_ANDROID=y +CONFIG_ANDROID_BINDER_IPC=y +CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_ROCKCHIP_EFUSE=y +CONFIG_NVMEM_SUNXI_SID=y +CONFIG_NVMEM_VF610_OCOTP=y +CONFIG_FPGA=m +CONFIG_FPGA_MGR_SOCFPGA=m +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ENCRYPTION=y +CONFIG_REISERFS_FS=m +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +CONFIG_XFS_FS=y +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_BTRFS_FS=y +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_F2FS_FS=y +CONFIG_F2FS_FS_SECURITY=y +CONFIG_F2FS_FS_ENCRYPTION=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=y +CONFIG_FSCACHE_STATS=y +CONFIG_CACHEFILES=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_NTFS_RW=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_ADFS_FS=m +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_LOGFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZ4=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BOTH=y +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_EXOFS_FS=m +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_V4_SECURITY_LABEL=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_CEPH_FS=m +CONFIG_CEPH_FSCACHE=y +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_SMB2=y +CONFIG_CIFS_FSCACHE=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +CONFIG_AFS_FSCACHE=y +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y +CONFIG_9P_FS_SECURITY=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_SCHEDSTATS=y +CONFIG_SCHED_STACK_END_CHECK=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_LIST=y +CONFIG_NOTIFIER_ERROR_INJECTION=m +CONFIG_CPU_NOTIFIER_ERROR_INJECT=m +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_UPROBE_EVENT=y +CONFIG_TEST_USER_COPY=m +CONFIG_TEST_BPF=m +CONFIG_TEST_FIRMWARE=m +CONFIG_TEST_STATIC_KEYS=m +CONFIG_KGDB=y +CONFIG_KGDB_KDB=y +CONFIG_KDB_KEYBOARD=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +CONFIG_SECURITY_TOMOYO=y +CONFIG_SECURITY_APPARMOR=y +CONFIG_SECURITY_YAMA=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_DEV_FSL_CAAM=m +CONFIG_CRYPTO_DEV_OMAP_SHAM=m +CONFIG_CRYPTO_DEV_OMAP_AES=m +CONFIG_CRYPTO_DEV_OMAP_DES=m +CONFIG_CRYPTO_DEV_SAHARA=m +CONFIG_CRYPTO_DEV_SUN4I_SS=m +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +# CONFIG_XZ_DEC_X86 is not set +# CONFIG_XZ_DEC_POWERPC is not set +# CONFIG_XZ_DEC_IA64 is not set +# CONFIG_XZ_DEC_SPARC is not set diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 8cfbfe0..867ca34 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum) static void mityomapl138_cpufreq_init(const char *partnum) { } #endif -static void read_factory_config(struct memory_accessor *a, void *context) +static void read_factory_config(struct nvmem_device *nvmem, void *context) { int ret; const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; - ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); + ret = nvmem_device_read(nvmem, 0, sizeof(factory_config), + &factory_config); if (ret != sizeof(struct factory_config)) { pr_warn("Read Factory Config Failed: %d\n", ret); goto bad_config; diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index a794f6d..f55ef2e 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info); void __iomem *davinci_intc_base; int davinci_intc_type; -void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) { char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; off_t offset = (off_t)context; /* Read MAC addr from EEPROM */ - if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); } diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 3a55298..aa16f7e 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -72,3 +72,9 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool + +config WAND_RFKILL + tristate "Wandboard RF Kill support" + depends on SOC_IMX6Q + default m + select RFKILL diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index e5cf587..eee36d9 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o +obj-$(CONFIG_WAND_RFKILL) += wand-rfkill.o diff --git b/arch/arm/mach-imx/devices/wand-rfkill.c b/arch/arm/mach-imx/devices/wand-rfkill.c new file mode 100644 index 0000000..da7ef9f --- /dev/null +++ b/arch/arm/mach-imx/devices/wand-rfkill.c @@ -0,0 +1,290 @@ +/* + * arch/arm/mach-imx/devices/wand-rfkill.c + * + * Copyright (C) 2013 Vladimir Ermakov + * + * based on net/rfkill/rfkill-gpio.c + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +struct wand_rfkill_data { + struct rfkill *rfkill_dev; + int shutdown_gpio; + const char *shutdown_name; +}; + +static int wand_rfkill_set_block(void *data, bool blocked) +{ + struct wand_rfkill_data *rfkill = data; + + pr_debug("wandboard-rfkill: set block %d\n", blocked); + + if (blocked) { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 0); + } else { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 1); + } + + return 0; +} + +static const struct rfkill_ops wand_rfkill_ops = { + .set_block = wand_rfkill_set_block, +}; + +static int wand_rfkill_wifi_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int wl_ref_on, wl_rst_n, wl_reg_on, wl_wake, wl_host_wake; + + wl_ref_on = of_get_named_gpio(np, "wifi-ref-on", 0); + wl_rst_n = of_get_named_gpio(np, "wifi-rst-n", 0); + wl_reg_on = of_get_named_gpio(np, "wifi-reg-on", 0); + wl_wake = of_get_named_gpio(np, "wifi-wake", 0); + wl_host_wake = of_get_named_gpio(np, "wifi-host-wake", 0); + + if (!gpio_is_valid(wl_rst_n) || !gpio_is_valid(wl_ref_on) || + !gpio_is_valid(wl_reg_on) || !gpio_is_valid(wl_wake) || + !gpio_is_valid(wl_host_wake)) { + + dev_err(dev, "incorrect wifi gpios (%d %d %d %d %d)\n", + wl_rst_n, wl_ref_on, wl_reg_on, wl_wake, wl_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize wifi chip\n"); + + gpio_request(wl_rst_n, "wl_rst_n"); + gpio_direction_output(wl_rst_n, 0); + msleep(11); + gpio_set_value(wl_rst_n, 1); + + gpio_request(wl_ref_on, "wl_ref_on"); + gpio_direction_output(wl_ref_on, 1); + + gpio_request(wl_reg_on, "wl_reg_on"); + gpio_direction_output(wl_reg_on, 1); + + gpio_request(wl_wake, "wl_wake"); + gpio_direction_output(wl_wake, 1); + + gpio_request(wl_host_wake, "wl_host_wake"); + gpio_direction_input(wl_host_wake); + + rfkill->shutdown_name = "wifi_shutdown"; + rfkill->shutdown_gpio = wl_wake; + + rfkill->rfkill_dev = rfkill_alloc("wifi-rfkill", dev, RFKILL_TYPE_WLAN, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto wifi_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto wifi_fail_unregister; + + dev_info(dev, "wifi-rfkill registered.\n"); + + return 0; + +wifi_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +wifi_fail_free_gpio: + if (gpio_is_valid(wl_rst_n)) gpio_free(wl_rst_n); + if (gpio_is_valid(wl_ref_on)) gpio_free(wl_ref_on); + if (gpio_is_valid(wl_reg_on)) gpio_free(wl_reg_on); + if (gpio_is_valid(wl_wake)) gpio_free(wl_wake); + if (gpio_is_valid(wl_host_wake)) gpio_free(wl_host_wake); + + return ret; +} + +static int wand_rfkill_bt_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int bt_on, bt_wake, bt_host_wake; + + bt_on = of_get_named_gpio(np, "bluetooth-on", 0); + bt_wake = of_get_named_gpio(np, "bluetooth-wake", 0); + bt_host_wake = of_get_named_gpio(np, "bluetooth-host-wake", 0); + + if (!gpio_is_valid(bt_on) || !gpio_is_valid(bt_wake) || + !gpio_is_valid(bt_host_wake)) { + + dev_err(dev, "incorrect bt gpios (%d %d %d)\n", + bt_on, bt_wake, bt_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize bluetooth chip\n"); + + gpio_request(bt_on, "bt_on"); + gpio_direction_output(bt_on, 0); + msleep(11); + gpio_set_value(bt_on, 1); + + gpio_request(bt_wake, "bt_wake"); + gpio_direction_output(bt_wake, 1); + + gpio_request(bt_host_wake, "bt_host_wake"); + gpio_direction_input(bt_host_wake); + + rfkill->shutdown_name = "bluetooth_shutdown"; + rfkill->shutdown_gpio = bt_wake; + + rfkill->rfkill_dev = rfkill_alloc("bluetooth-rfkill", dev, RFKILL_TYPE_BLUETOOTH, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto bt_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto bt_fail_unregister; + + dev_info(dev, "bluetooth-rfkill registered.\n"); + + return 0; + +bt_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +bt_fail_free_gpio: + if (gpio_is_valid(bt_on)) gpio_free(bt_on); + if (gpio_is_valid(bt_wake)) gpio_free(bt_wake); + if (gpio_is_valid(bt_host_wake)) gpio_free(bt_host_wake); + + return ret; +} + +static int wand_rfkill_probe(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill; + struct pinctrl *pinctrl; + int ret; + + dev_info(&pdev->dev, "Wandboard rfkill initialization\n"); + + if (!pdev->dev.of_node) { + dev_err(&pdev->dev, "no device tree node\n"); + return -ENODEV; + } + + rfkill = kzalloc(sizeof(*rfkill) * 2, GFP_KERNEL); + if (!rfkill) + return -ENOMEM; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + int ret = PTR_ERR(pinctrl); + dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret); + return ret; + } + + /* setup WiFi */ + ret = wand_rfkill_wifi_probe(&pdev->dev, pdev->dev.of_node, &rfkill[0]); + if (ret < 0) + goto fail_free_rfkill; + + /* setup bluetooth */ + ret = wand_rfkill_bt_probe(&pdev->dev, pdev->dev.of_node, &rfkill[1]); + if (ret < 0) + goto fail_unregister_wifi; + + platform_set_drvdata(pdev, rfkill); + + return 0; + +fail_unregister_wifi: + if (rfkill[1].rfkill_dev) { + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + } + + /* TODO free gpio */ + +fail_free_rfkill: + kfree(rfkill); + + return ret; +} + +static int wand_rfkill_remove(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill = platform_get_drvdata(pdev); + + dev_info(&pdev->dev, "Module unloading\n"); + + if (!rfkill) + return 0; + + /* WiFi */ + if (gpio_is_valid(rfkill[0].shutdown_gpio)) + gpio_free(rfkill[0].shutdown_gpio); + + rfkill_unregister(rfkill[0].rfkill_dev); + rfkill_destroy(rfkill[0].rfkill_dev); + + /* Bt */ + if (gpio_is_valid(rfkill[1].shutdown_gpio)) + gpio_free(rfkill[1].shutdown_gpio); + + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + + kfree(rfkill); + + return 0; +} + +static struct of_device_id wand_rfkill_match[] = { + { .compatible = "wand,imx6q-wandboard-rfkill", }, + { .compatible = "wand,imx6dl-wandboard-rfkill", }, + { .compatible = "wand,imx6qdl-wandboard-rfkill", }, + {} +}; + +static struct platform_driver wand_rfkill_driver = { + .driver = { + .name = "wandboard-rfkill", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(wand_rfkill_match), + }, + .probe = wand_rfkill_probe, + .remove = wand_rfkill_remove +}; + +module_platform_driver(wand_rfkill_driver); + +MODULE_AUTHOR("Vladimir Ermakov "); +MODULE_DESCRIPTION("Wandboard rfkill driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 72ebc4c..bb2326b 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -122,8 +122,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct omap_device *od; struct omap_hwmod *oh; struct device_node *node = pdev->dev.of_node; - const char *oh_name; - int oh_cnt, i, ret = 0; + const char *oh_name, *rst_name; + int oh_cnt, dstr_cnt, i, ret = 0; bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); @@ -174,6 +174,26 @@ static int omap_device_build_from_dt(struct platform_device *pdev) omap_device_enable(pdev); pm_runtime_set_active(&pdev->dev); } + dstr_cnt = + of_property_count_strings(node, "ti,deassert-hard-reset"); + if (dstr_cnt > 0) { + for (i = 0; i < dstr_cnt; i += 2) { + of_property_read_string_index( + node, "ti,deassert-hard-reset", i, + &oh_name); + of_property_read_string_index( + node, "ti,deassert-hard-reset", i+1, + &rst_name); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + dev_warn(&pdev->dev, + "Cannot parse deassert property for '%s'\n", + oh_name); + break; + } + omap_hwmod_deassert_hardreset(oh, rst_name); + } + } odbfd_exit1: kfree(hwmods); @@ -190,11 +210,30 @@ static int _omap_device_notifier_call(struct notifier_block *nb, { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od; + int i, err; switch (event) { case BUS_NOTIFY_DEL_DEVICE: - if (pdev->archdata.od) - omap_device_delete(pdev->archdata.od); + od = to_omap_device(pdev); + if (!od) + break; + + for (i = 0; i < od->hwmods_cnt; i++) { + /* shutdown hwmods */ + omap_hwmod_shutdown(od->hwmods[i]); + /* we don't remove clocks cause there's no API to do so */ + /* no harm done, since they will not be created next time */ + } + omap_device_delete(od); + break; + case BUS_NOTIFY_UNBOUND_DRIVER: + od = to_omap_device(pdev); + if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) { + dev_info(dev, "enabled after unload, idling\n"); + err = omap_device_idle(pdev); + if (err) + dev_err(dev, "failed to idle\n"); + } break; case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) @@ -757,6 +796,8 @@ int omap_device_idle(struct platform_device *pdev) struct omap_device *od; od = to_omap_device(pdev); + if (!od) + return 0; if (od->_state != OMAP_DEVICE_STATE_ENABLED) { dev_warn(&pdev->dev, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 5814477..339b859 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include "common.h" #include "common-board-devices.h" @@ -427,6 +429,24 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } +/* Dual mode timer PWM callbacks platdata */ +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) +struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { + .request_by_node = omap_dm_timer_request_by_node, + .free = omap_dm_timer_free, + .enable = omap_dm_timer_enable, + .disable = omap_dm_timer_disable, + .get_fclk = omap_dm_timer_get_fclk, + .start = omap_dm_timer_start, + .stop = omap_dm_timer_stop, + .set_load = omap_dm_timer_set_load, + .set_match = omap_dm_timer_set_match, + .set_pwm = omap_dm_timer_set_pwm, + .set_prescaler = omap_dm_timer_set_prescaler, + .write_counter = omap_dm_timer_write_counter, +}; +#endif + /* * Few boards still need auxdata populated before we populate * the dev entries in of_platform_populate(). @@ -480,6 +500,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", &wkup_m3_data), #endif +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) + OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata), +#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", &omap4_iommu_pdata), diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b18bea0..e6900c3 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -85,6 +85,20 @@ config GPIO_SYSFS Kernel drivers may also request that a particular GPIO be exported to userspace; this can be useful when debugging. +config GPIO_OF_HELPER + bool "GPIO OF helper device (EXPERIMENTAL)" + depends on OF_GPIO + help + Say Y here to add an GPIO OF helper driver + + Allows you specify a GPIO helper based on OF + which allows simple export of GPIO functionality + in user-space. + + Features include, value set/get, direction control, + interrupt/value change poll support, event counting + and others. + config GPIO_GENERIC tristate diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 986dbd8..113912b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o obj-$(CONFIG_OF_GPIO) += gpiolib-of.o obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o +obj-$(CONFIG_GPIO_OF_HELPER) += gpio-of-helper.o # Device drivers. Generally keep list sorted alphabetically obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o diff --git b/drivers/gpio/gpio-of-helper.c b/drivers/gpio/gpio-of-helper.c new file mode 100644 index 0000000..a9f260b --- /dev/null +++ b/drivers/gpio/gpio-of-helper.c @@ -0,0 +1,429 @@ +/* + * GPIO OF based helper + * + * A simple DT based driver to provide access to GPIO functionality + * to user-space via sysfs. + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* fwd decl. */ +struct gpio_of_helper_info; + +enum gpio_type { + GPIO_TYPE_INPUT = 0, + GPIO_TYPE_OUTPUT = 1, +}; + +struct gpio_of_entry { + int id; + struct gpio_of_helper_info *info; + struct device_node *node; + enum gpio_type type; + int gpio; + enum of_gpio_flags gpio_flags; + int irq; + const char *name; + atomic64_t counter; + unsigned int count_flags; +#define COUNT_RISING_EDGE (1 << 0) +#define COUNT_FALLING_EDGE (1 << 1) +}; + +struct gpio_of_helper_info { + struct platform_device *pdev; + struct idr idr; +}; + +static const struct of_device_id gpio_of_helper_of_match[] = { + { + .compatible = "gpio-of-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_of_helper_of_match); + +static ssize_t gpio_of_helper_show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + char *p, *e; + int id, n; + + p = buf; + e = p + PAGE_SIZE; + n = 0; + idr_for_each_entry(&info->idr, entry, id) { + switch (entry->type) { + case GPIO_TYPE_INPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s %llu\n", + entry->id, entry->name, entry->gpio, "IN", + (unsigned long long) + atomic64_read(&entry->counter)); + break; + case GPIO_TYPE_OUTPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s\n", + entry->id, entry->name, entry->gpio, "OUT"); + break; + } + p += n; + } + + return p - buf; +} + +static DEVICE_ATTR(status, S_IRUGO, + gpio_of_helper_show_status, NULL); + +static irqreturn_t gpio_of_helper_handler(int irq, void *ptr) +{ + struct gpio_of_entry *entry = ptr; + + /* caution - low speed interfaces only! */ + atomic64_inc(&entry->counter); + + return IRQ_HANDLED; +} + +static struct gpio_of_entry * +gpio_of_entry_create(struct gpio_of_helper_info *info, + struct device_node *node) +{ + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + struct gpio_of_entry *entry; + int err, gpio, irq; + unsigned int req_flags, count_flags, irq_flags; + enum gpio_type type; + enum of_gpio_flags gpio_flags; + const char *name; + + /* get the type of the node first */ + if (of_property_read_bool(node, "input")) + type = GPIO_TYPE_INPUT; + else if (of_property_read_bool(node, "output")) + type = GPIO_TYPE_OUTPUT; + else { + dev_err(dev, "Not valid gpio node type\n"); + err = -EINVAL; + goto err_bad_node; + } + + /* get the name */ + err = of_property_read_string(node, "gpio-name", &name); + if (err != 0) { + dev_err(dev, "Failed to get name property\n"); + goto err_bad_node; + } + + err = of_get_named_gpio_flags(node, "gpio", 0, &gpio_flags); + if (IS_ERR_VALUE(err)) { + dev_err(dev, "Failed to get gpio property of '%s'\n", name); + goto err_bad_node; + } + gpio = err; + + req_flags = 0; + count_flags = 0; + + /* set the request flags */ + switch (type) { + case GPIO_TYPE_INPUT: + req_flags = GPIOF_DIR_IN | GPIOF_EXPORT; + if (of_property_read_bool(node, "count-falling-edge")) + count_flags |= COUNT_FALLING_EDGE; + if (of_property_read_bool(node, "count-rising-edge")) + count_flags |= COUNT_RISING_EDGE; + break; + case GPIO_TYPE_OUTPUT: + req_flags = GPIOF_DIR_OUT | GPIOF_EXPORT; + if (of_property_read_bool(node, "init-high")) + req_flags |= GPIOF_OUT_INIT_HIGH; + else if (of_property_read_bool(node, "init-low")) + req_flags |= GPIOF_OUT_INIT_LOW; + break; + } + if (of_property_read_bool(node, "dir-changeable")) + req_flags |= GPIOF_EXPORT_CHANGEABLE; + + /* request the gpio */ + err = devm_gpio_request_one(dev, gpio, req_flags, name); + if (err != 0) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + irq = -1; + irq_flags = 0; + + /* counter mode requested - need an interrupt */ + if (count_flags != 0) { + irq = gpio_to_irq(gpio); + if (IS_ERR_VALUE(irq)) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + if (count_flags & COUNT_RISING_EDGE) + irq_flags |= IRQF_TRIGGER_RISING; + if (count_flags & COUNT_FALLING_EDGE) + irq_flags |= IRQF_TRIGGER_FALLING; + } + +// if (!idr_pre_get(&info->idr, GFP_KERNEL)) { +// dev_err(dev, "Failed on idr_pre_get of '%s'\n", name); +// err = -ENOMEM; +// goto err_no_mem; +// } + + idr_preload(GFP_KERNEL); + + entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL); + if (entry == NULL) { + dev_err(dev, "Failed to allocate gpio entry of '%s'\n", name); + err = -ENOMEM; + goto err_no_mem; + } + + entry->id = -1; + entry->info = info; + entry->node = of_node_get(node); /* get node reference */ + entry->type = type; + entry->gpio = gpio; + entry->gpio_flags = gpio_flags; + entry->irq = irq; + entry->name = name; + + /* interrupt enable is last thing done */ + if (irq >= 0) { + atomic64_set(&entry->counter, 0); + entry->count_flags = count_flags; + err = devm_request_irq(dev, irq, gpio_of_helper_handler, + irq_flags, name, entry); + if (err != 0) { + dev_err(dev, "Failed to request irq of '%s'\n", name); + goto err_no_irq; + } + } + + /* all done; insert */ +// err = idr_get_new(&info->idr, entry, &entry->id); +// if (IS_ERR_VALUE(err)) { +// dev_err(dev, "Failed to idr_get_new of '%s'\n", name); +// goto err_fail_idr; +// } + + err = idr_alloc(&info->idr, entry, 0, 0, GFP_NOWAIT); + if (err >= 0) + entry->id = err; + + idr_preload_end(); + + if (err < 0) { + dev_err(dev, "Failed to idr_get_new of '%s'\n", name); + goto err_fail_idr; + } + + dev_info(dev, "Allocated GPIO id=%d\n", entry->id); + + return entry; + +err_fail_idr: + /* nothing to do */ +err_no_irq: + /* release node ref */ + of_node_put(node); + /* nothing else needs to be done, devres handles it */ +err_no_mem: +err_bad_node: + return ERR_PTR(err); +} + +static int gpio_of_entry_destroy(struct gpio_of_entry *entry) +{ + struct gpio_of_helper_info *info = entry->info; + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + + dev_info(dev, "Destroying GPIO id=%d\n", entry->id); + + /* remove from the IDR */ + idr_remove(&info->idr, entry->id); + + /* remove node ref */ + of_node_put(entry->node); + + /* free gpio */ + devm_gpio_free(dev, entry->gpio); + + /* gree irq */ + if (entry->irq >= 0) + devm_free_irq(dev, entry->irq, entry); + + /* and free */ + devm_kfree(dev, entry); + + return 0; +} + +static int gpio_of_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_of_helper_info *info; + struct gpio_of_entry *entry; + struct device_node *pnode = pdev->dev.of_node; + struct device_node *cnode; + struct pinctrl *pinctrl; + int err; + + /* we only support OF */ + if (pnode == NULL) { + dev_err(&pdev->dev, "No platform of_node!\n"); + return -ENODEV; + } + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + /* special handling for probe defer */ + if (PTR_ERR(pinctrl) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + } + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (info == NULL) { + dev_err(&pdev->dev, "Failed to allocate info\n"); + err = -ENOMEM; + goto err_no_mem; + } + platform_set_drvdata(pdev, info); + info->pdev = pdev; + + idr_init(&info->idr); + + err = device_create_file(dev, &dev_attr_status); + if (err != 0) { + dev_err(dev, "Failed to create status sysfs attribute\n"); + goto err_no_sysfs; + } + + for_each_child_of_node(pnode, cnode) { + + entry = gpio_of_entry_create(info, cnode); + if (IS_ERR_OR_NULL(entry)) { + dev_err(dev, "Failed to create gpio entry\n"); + err = PTR_ERR(entry); + goto err_fail_entry; + } + } + + dev_info(&pdev->dev, "ready\n"); + + return 0; +err_fail_entry: + device_remove_file(&pdev->dev, &dev_attr_status); +err_no_sysfs: +err_no_mem: + return err; +} + +static int gpio_of_helper_remove(struct platform_device *pdev) +{ + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + int id; + + dev_info(&pdev->dev, "removing\n"); + + device_remove_file(&pdev->dev, &dev_attr_status); + + id = 0; + idr_for_each_entry(&info->idr, entry, id) { + /* destroy each and every one */ + gpio_of_entry_destroy(entry); + } + + return 0; +} + +#ifdef CONFIG_PM +//#ifdef CONFIG_PM_RUNTIME +static int gpio_of_helper_runtime_suspend(struct device *dev) +{ + /* place holder */ + return 0; +} + +static int gpio_of_helper_runtime_resume(struct device *dev) +{ + /* place holder */ + return 0; +} +//#endif /* CONFIG_PM_RUNTIME */ + +static struct dev_pm_ops gpio_of_helper_pm_ops = { + SET_RUNTIME_PM_OPS(gpio_of_helper_runtime_suspend, + gpio_of_helper_runtime_resume, NULL) +}; +#define GPIO_OF_HELPER_PM_OPS (&gpio_of_helper_pm_ops) +#else +#define GPIO_OF_HELPER_PM_OPS NULL +#endif /* CONFIG_PM */ + +struct platform_driver gpio_of_helper_driver = { + .probe = gpio_of_helper_probe, + .remove = gpio_of_helper_remove, + .driver = { + .name = "gpio-of-helper", + .owner = THIS_MODULE, + .pm = GPIO_OF_HELPER_PM_OPS, + .of_match_table = gpio_of_helper_of_match, + }, +}; + +module_platform_driver(gpio_of_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou "); +MODULE_DESCRIPTION("GPIO OF Helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-of-helper"); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index c4bf9a1..b02ac62 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -266,3 +266,5 @@ source "drivers/gpu/drm/amd/amdkfd/Kconfig" source "drivers/gpu/drm/imx/Kconfig" source "drivers/gpu/drm/vc4/Kconfig" + +source "drivers/gpu/drm/etnaviv/Kconfig" diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 1e9ff4c..f858aa2 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -75,3 +75,4 @@ obj-y += i2c/ obj-y += panel/ obj-y += bridge/ obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/ +obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/ diff --git b/drivers/gpu/drm/etnaviv/Kconfig b/drivers/gpu/drm/etnaviv/Kconfig new file mode 100644 index 0000000..2cde7a5 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/Kconfig @@ -0,0 +1,20 @@ + +config DRM_ETNAVIV + tristate "ETNAVIV (DRM support for Vivante GPU IP cores)" + depends on DRM + depends on ARCH_MXC || ARCH_DOVE + select SHMEM + select TMPFS + select IOMMU_API + select IOMMU_SUPPORT + select WANT_DEV_COREDUMP + help + DRM driver for Vivante GPUs. + +config DRM_ETNAVIV_REGISTER_LOGGING + bool "enable ETNAVIV register logging" + depends on DRM_ETNAVIV + help + Compile in support for logging register reads/writes in a format + that can be parsed by envytools demsm tool. If enabled, register + logging can be switched on via etnaviv.reglog=y module param. diff --git b/drivers/gpu/drm/etnaviv/Makefile b/drivers/gpu/drm/etnaviv/Makefile new file mode 100644 index 0000000..1086e98 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/Makefile @@ -0,0 +1,14 @@ +etnaviv-y := \ + etnaviv_buffer.o \ + etnaviv_cmd_parser.o \ + etnaviv_drv.o \ + etnaviv_dump.o \ + etnaviv_gem_prime.o \ + etnaviv_gem_submit.o \ + etnaviv_gem.o \ + etnaviv_gpu.o \ + etnaviv_iommu_v2.o \ + etnaviv_iommu.o \ + etnaviv_mmu.o + +obj-$(CONFIG_DRM_ETNAVIV) += etnaviv.o diff --git b/drivers/gpu/drm/etnaviv/cmdstream.xml.h b/drivers/gpu/drm/etnaviv/cmdstream.xml.h new file mode 100644 index 0000000..8c44ba9 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/cmdstream.xml.h @@ -0,0 +1,218 @@ +#ifndef CMDSTREAM_XML +#define CMDSTREAM_XML + +/* Autogenerated file, DO NOT EDIT manually! + +This file was generated by the rules-ng-ng headergen tool in this git repository: +http://0x04.net/cgit/index.cgi/rules-ng-ng +git clone git://0x04.net/rules-ng-ng + +The rules-ng-ng source files this header was generated from are: +- cmdstream.xml ( 12589 bytes, from 2014-02-17 14:57:56) +- common.xml ( 18437 bytes, from 2015-03-25 11:27:41) + +Copyright (C) 2014 +*/ + + +#define FE_OPCODE_LOAD_STATE 0x00000001 +#define FE_OPCODE_END 0x00000002 +#define FE_OPCODE_NOP 0x00000003 +#define FE_OPCODE_DRAW_2D 0x00000004 +#define FE_OPCODE_DRAW_PRIMITIVES 0x00000005 +#define FE_OPCODE_DRAW_INDEXED_PRIMITIVES 0x00000006 +#define FE_OPCODE_WAIT 0x00000007 +#define FE_OPCODE_LINK 0x00000008 +#define FE_OPCODE_STALL 0x00000009 +#define FE_OPCODE_CALL 0x0000000a +#define FE_OPCODE_RETURN 0x0000000b +#define FE_OPCODE_CHIP_SELECT 0x0000000d +#define PRIMITIVE_TYPE_POINTS 0x00000001 +#define PRIMITIVE_TYPE_LINES 0x00000002 +#define PRIMITIVE_TYPE_LINE_STRIP 0x00000003 +#define PRIMITIVE_TYPE_TRIANGLES 0x00000004 +#define PRIMITIVE_TYPE_TRIANGLE_STRIP 0x00000005 +#define PRIMITIVE_TYPE_TRIANGLE_FAN 0x00000006 +#define PRIMITIVE_TYPE_LINE_LOOP 0x00000007 +#define PRIMITIVE_TYPE_QUADS 0x00000008 +#define VIV_FE_LOAD_STATE 0x00000000 + +#define VIV_FE_LOAD_STATE_HEADER 0x00000000 +#define VIV_FE_LOAD_STATE_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_LOAD_STATE_HEADER_OP__SHIFT 27 +#define VIV_FE_LOAD_STATE_HEADER_OP_LOAD_STATE 0x08000000 +#define VIV_FE_LOAD_STATE_HEADER_FIXP 0x04000000 +#define VIV_FE_LOAD_STATE_HEADER_COUNT__MASK 0x03ff0000 +#define VIV_FE_LOAD_STATE_HEADER_COUNT__SHIFT 16 +#define VIV_FE_LOAD_STATE_HEADER_COUNT(x) (((x) << VIV_FE_LOAD_STATE_HEADER_COUNT__SHIFT) & VIV_FE_LOAD_STATE_HEADER_COUNT__MASK) +#define VIV_FE_LOAD_STATE_HEADER_OFFSET__MASK 0x0000ffff +#define VIV_FE_LOAD_STATE_HEADER_OFFSET__SHIFT 0 +#define VIV_FE_LOAD_STATE_HEADER_OFFSET(x) (((x) << VIV_FE_LOAD_STATE_HEADER_OFFSET__SHIFT) & VIV_FE_LOAD_STATE_HEADER_OFFSET__MASK) +#define VIV_FE_LOAD_STATE_HEADER_OFFSET__SHR 2 + +#define VIV_FE_END 0x00000000 + +#define VIV_FE_END_HEADER 0x00000000 +#define VIV_FE_END_HEADER_EVENT_ID__MASK 0x0000001f +#define VIV_FE_END_HEADER_EVENT_ID__SHIFT 0 +#define VIV_FE_END_HEADER_EVENT_ID(x) (((x) << VIV_FE_END_HEADER_EVENT_ID__SHIFT) & VIV_FE_END_HEADER_EVENT_ID__MASK) +#define VIV_FE_END_HEADER_EVENT_ENABLE 0x00000100 +#define VIV_FE_END_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_END_HEADER_OP__SHIFT 27 +#define VIV_FE_END_HEADER_OP_END 0x10000000 + +#define VIV_FE_NOP 0x00000000 + +#define VIV_FE_NOP_HEADER 0x00000000 +#define VIV_FE_NOP_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_NOP_HEADER_OP__SHIFT 27 +#define VIV_FE_NOP_HEADER_OP_NOP 0x18000000 + +#define VIV_FE_DRAW_2D 0x00000000 + +#define VIV_FE_DRAW_2D_HEADER 0x00000000 +#define VIV_FE_DRAW_2D_HEADER_COUNT__MASK 0x0000ff00 +#define VIV_FE_DRAW_2D_HEADER_COUNT__SHIFT 8 +#define VIV_FE_DRAW_2D_HEADER_COUNT(x) (((x) << VIV_FE_DRAW_2D_HEADER_COUNT__SHIFT) & VIV_FE_DRAW_2D_HEADER_COUNT__MASK) +#define VIV_FE_DRAW_2D_HEADER_DATA_COUNT__MASK 0x07ff0000 +#define VIV_FE_DRAW_2D_HEADER_DATA_COUNT__SHIFT 16 +#define VIV_FE_DRAW_2D_HEADER_DATA_COUNT(x) (((x) << VIV_FE_DRAW_2D_HEADER_DATA_COUNT__SHIFT) & VIV_FE_DRAW_2D_HEADER_DATA_COUNT__MASK) +#define VIV_FE_DRAW_2D_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_DRAW_2D_HEADER_OP__SHIFT 27 +#define VIV_FE_DRAW_2D_HEADER_OP_DRAW_2D 0x20000000 + +#define VIV_FE_DRAW_2D_TOP_LEFT 0x00000008 +#define VIV_FE_DRAW_2D_TOP_LEFT_X__MASK 0x0000ffff +#define VIV_FE_DRAW_2D_TOP_LEFT_X__SHIFT 0 +#define VIV_FE_DRAW_2D_TOP_LEFT_X(x) (((x) << VIV_FE_DRAW_2D_TOP_LEFT_X__SHIFT) & VIV_FE_DRAW_2D_TOP_LEFT_X__MASK) +#define VIV_FE_DRAW_2D_TOP_LEFT_Y__MASK 0xffff0000 +#define VIV_FE_DRAW_2D_TOP_LEFT_Y__SHIFT 16 +#define VIV_FE_DRAW_2D_TOP_LEFT_Y(x) (((x) << VIV_FE_DRAW_2D_TOP_LEFT_Y__SHIFT) & VIV_FE_DRAW_2D_TOP_LEFT_Y__MASK) + +#define VIV_FE_DRAW_2D_BOTTOM_RIGHT 0x0000000c +#define VIV_FE_DRAW_2D_BOTTOM_RIGHT_X__MASK 0x0000ffff +#define VIV_FE_DRAW_2D_BOTTOM_RIGHT_X__SHIFT 0 +#define VIV_FE_DRAW_2D_BOTTOM_RIGHT_X(x) (((x) << VIV_FE_DRAW_2D_BOTTOM_RIGHT_X__SHIFT) & VIV_FE_DRAW_2D_BOTTOM_RIGHT_X__MASK) +#define VIV_FE_DRAW_2D_BOTTOM_RIGHT_Y__MASK 0xffff0000 +#define VIV_FE_DRAW_2D_BOTTOM_RIGHT_Y__SHIFT 16 +#define VIV_FE_DRAW_2D_BOTTOM_RIGHT_Y(x) (((x) << VIV_FE_DRAW_2D_BOTTOM_RIGHT_Y__SHIFT) & VIV_FE_DRAW_2D_BOTTOM_RIGHT_Y__MASK) + +#define VIV_FE_DRAW_PRIMITIVES 0x00000000 + +#define VIV_FE_DRAW_PRIMITIVES_HEADER 0x00000000 +#define VIV_FE_DRAW_PRIMITIVES_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_DRAW_PRIMITIVES_HEADER_OP__SHIFT 27 +#define VIV_FE_DRAW_PRIMITIVES_HEADER_OP_DRAW_PRIMITIVES 0x28000000 + +#define VIV_FE_DRAW_PRIMITIVES_COMMAND 0x00000004 +#define VIV_FE_DRAW_PRIMITIVES_COMMAND_TYPE__MASK 0x000000ff +#define VIV_FE_DRAW_PRIMITIVES_COMMAND_TYPE__SHIFT 0 +#define VIV_FE_DRAW_PRIMITIVES_COMMAND_TYPE(x) (((x) << VIV_FE_DRAW_PRIMITIVES_COMMAND_TYPE__SHIFT) & VIV_FE_DRAW_PRIMITIVES_COMMAND_TYPE__MASK) + +#define VIV_FE_DRAW_PRIMITIVES_START 0x00000008 + +#define VIV_FE_DRAW_PRIMITIVES_COUNT 0x0000000c + +#define VIV_FE_DRAW_INDEXED_PRIMITIVES 0x00000000 + +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_HEADER 0x00000000 +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_HEADER_OP__SHIFT 27 +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_HEADER_OP_DRAW_INDEXED_PRIMITIVES 0x30000000 + +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_COMMAND 0x00000004 +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_COMMAND_TYPE__MASK 0x000000ff +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_COMMAND_TYPE__SHIFT 0 +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_COMMAND_TYPE(x) (((x) << VIV_FE_DRAW_INDEXED_PRIMITIVES_COMMAND_TYPE__SHIFT) & VIV_FE_DRAW_INDEXED_PRIMITIVES_COMMAND_TYPE__MASK) + +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_START 0x00000008 + +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_COUNT 0x0000000c + +#define VIV_FE_DRAW_INDEXED_PRIMITIVES_OFFSET 0x00000010 + +#define VIV_FE_WAIT 0x00000000 + +#define VIV_FE_WAIT_HEADER 0x00000000 +#define VIV_FE_WAIT_HEADER_DELAY__MASK 0x0000ffff +#define VIV_FE_WAIT_HEADER_DELAY__SHIFT 0 +#define VIV_FE_WAIT_HEADER_DELAY(x) (((x) << VIV_FE_WAIT_HEADER_DELAY__SHIFT) & VIV_FE_WAIT_HEADER_DELAY__MASK) +#define VIV_FE_WAIT_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_WAIT_HEADER_OP__SHIFT 27 +#define VIV_FE_WAIT_HEADER_OP_WAIT 0x38000000 + +#define VIV_FE_LINK 0x00000000 + +#define VIV_FE_LINK_HEADER 0x00000000 +#define VIV_FE_LINK_HEADER_PREFETCH__MASK 0x0000ffff +#define VIV_FE_LINK_HEADER_PREFETCH__SHIFT 0 +#define VIV_FE_LINK_HEADER_PREFETCH(x) (((x) << VIV_FE_LINK_HEADER_PREFETCH__SHIFT) & VIV_FE_LINK_HEADER_PREFETCH__MASK) +#define VIV_FE_LINK_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_LINK_HEADER_OP__SHIFT 27 +#define VIV_FE_LINK_HEADER_OP_LINK 0x40000000 + +#define VIV_FE_LINK_ADDRESS 0x00000004 + +#define VIV_FE_STALL 0x00000000 + +#define VIV_FE_STALL_HEADER 0x00000000 +#define VIV_FE_STALL_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_STALL_HEADER_OP__SHIFT 27 +#define VIV_FE_STALL_HEADER_OP_STALL 0x48000000 + +#define VIV_FE_STALL_TOKEN 0x00000004 +#define VIV_FE_STALL_TOKEN_FROM__MASK 0x0000001f +#define VIV_FE_STALL_TOKEN_FROM__SHIFT 0 +#define VIV_FE_STALL_TOKEN_FROM(x) (((x) << VIV_FE_STALL_TOKEN_FROM__SHIFT) & VIV_FE_STALL_TOKEN_FROM__MASK) +#define VIV_FE_STALL_TOKEN_TO__MASK 0x00001f00 +#define VIV_FE_STALL_TOKEN_TO__SHIFT 8 +#define VIV_FE_STALL_TOKEN_TO(x) (((x) << VIV_FE_STALL_TOKEN_TO__SHIFT) & VIV_FE_STALL_TOKEN_TO__MASK) + +#define VIV_FE_CALL 0x00000000 + +#define VIV_FE_CALL_HEADER 0x00000000 +#define VIV_FE_CALL_HEADER_PREFETCH__MASK 0x0000ffff +#define VIV_FE_CALL_HEADER_PREFETCH__SHIFT 0 +#define VIV_FE_CALL_HEADER_PREFETCH(x) (((x) << VIV_FE_CALL_HEADER_PREFETCH__SHIFT) & VIV_FE_CALL_HEADER_PREFETCH__MASK) +#define VIV_FE_CALL_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_CALL_HEADER_OP__SHIFT 27 +#define VIV_FE_CALL_HEADER_OP_CALL 0x50000000 + +#define VIV_FE_CALL_ADDRESS 0x00000004 + +#define VIV_FE_CALL_RETURN_PREFETCH 0x00000008 + +#define VIV_FE_CALL_RETURN_ADDRESS 0x0000000c + +#define VIV_FE_RETURN 0x00000000 + +#define VIV_FE_RETURN_HEADER 0x00000000 +#define VIV_FE_RETURN_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_RETURN_HEADER_OP__SHIFT 27 +#define VIV_FE_RETURN_HEADER_OP_RETURN 0x58000000 + +#define VIV_FE_CHIP_SELECT 0x00000000 + +#define VIV_FE_CHIP_SELECT_HEADER 0x00000000 +#define VIV_FE_CHIP_SELECT_HEADER_OP__MASK 0xf8000000 +#define VIV_FE_CHIP_SELECT_HEADER_OP__SHIFT 27 +#define VIV_FE_CHIP_SELECT_HEADER_OP_CHIP_SELECT 0x68000000 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP15 0x00008000 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP14 0x00004000 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP13 0x00002000 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP12 0x00001000 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP11 0x00000800 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP10 0x00000400 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP9 0x00000200 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP8 0x00000100 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP7 0x00000080 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP6 0x00000040 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP5 0x00000020 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP4 0x00000010 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP3 0x00000008 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP2 0x00000004 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP1 0x00000002 +#define VIV_FE_CHIP_SELECT_HEADER_ENABLE_CHIP0 0x00000001 + + +#endif /* CMDSTREAM_XML */ diff --git b/drivers/gpu/drm/etnaviv/common.xml.h b/drivers/gpu/drm/etnaviv/common.xml.h new file mode 100644 index 0000000..e881482 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/common.xml.h @@ -0,0 +1,292 @@ +#ifndef COMMON_XML +#define COMMON_XML + +/* Autogenerated file, DO NOT EDIT manually! + +This file was generated by the rules-ng-ng headergen tool in this git repository: +http://0x04.net/cgit/index.cgi/rules-ng-ng +git clone git://0x04.net/rules-ng-ng + +The rules-ng-ng source files this header was generated from are: +- state_hi.xml ( 24309 bytes, from 2015-12-12 09:02:53) +- common.xml ( 18379 bytes, from 2015-12-12 09:02:53) + +Copyright (C) 2015 +*/ + + +#define PIPE_ID_PIPE_3D 0x00000000 +#define PIPE_ID_PIPE_2D 0x00000001 +#define SYNC_RECIPIENT_FE 0x00000001 +#define SYNC_RECIPIENT_RA 0x00000005 +#define SYNC_RECIPIENT_PE 0x00000007 +#define SYNC_RECIPIENT_DE 0x0000000b +#define SYNC_RECIPIENT_VG 0x0000000f +#define SYNC_RECIPIENT_TESSELATOR 0x00000010 +#define SYNC_RECIPIENT_VG2 0x00000011 +#define SYNC_RECIPIENT_TESSELATOR2 0x00000012 +#define SYNC_RECIPIENT_VG3 0x00000013 +#define SYNC_RECIPIENT_TESSELATOR3 0x00000014 +#define ENDIAN_MODE_NO_SWAP 0x00000000 +#define ENDIAN_MODE_SWAP_16 0x00000001 +#define ENDIAN_MODE_SWAP_32 0x00000002 +#define chipModel_GC200 0x00000200 +#define chipModel_GC300 0x00000300 +#define chipModel_GC320 0x00000320 +#define chipModel_GC328 0x00000328 +#define chipModel_GC350 0x00000350 +#define chipModel_GC355 0x00000355 +#define chipModel_GC400 0x00000400 +#define chipModel_GC410 0x00000410 +#define chipModel_GC420 0x00000420 +#define chipModel_GC428 0x00000428 +#define chipModel_GC450 0x00000450 +#define chipModel_GC500 0x00000500 +#define chipModel_GC520 0x00000520 +#define chipModel_GC530 0x00000530 +#define chipModel_GC600 0x00000600 +#define chipModel_GC700 0x00000700 +#define chipModel_GC800 0x00000800 +#define chipModel_GC860 0x00000860 +#define chipModel_GC880 0x00000880 +#define chipModel_GC1000 0x00001000 +#define chipModel_GC1500 0x00001500 +#define chipModel_GC2000 0x00002000 +#define chipModel_GC2100 0x00002100 +#define chipModel_GC2200 0x00002200 +#define chipModel_GC2500 0x00002500 +#define chipModel_GC3000 0x00003000 +#define chipModel_GC4000 0x00004000 +#define chipModel_GC5000 0x00005000 +#define chipModel_GC5200 0x00005200 +#define chipModel_GC6400 0x00006400 +#define RGBA_BITS_R 0x00000001 +#define RGBA_BITS_G 0x00000002 +#define RGBA_BITS_B 0x00000004 +#define RGBA_BITS_A 0x00000008 +#define chipFeatures_FAST_CLEAR 0x00000001 +#define chipFeatures_SPECIAL_ANTI_ALIASING 0x00000002 +#define chipFeatures_PIPE_3D 0x00000004 +#define chipFeatures_DXT_TEXTURE_COMPRESSION 0x00000008 +#define chipFeatures_DEBUG_MODE 0x00000010 +#define chipFeatures_Z_COMPRESSION 0x00000020 +#define chipFeatures_YUV420_SCALER 0x00000040 +#define chipFeatures_MSAA 0x00000080 +#define chipFeatures_DC 0x00000100 +#define chipFeatures_PIPE_2D 0x00000200 +#define chipFeatures_ETC1_TEXTURE_COMPRESSION 0x00000400 +#define chipFeatures_FAST_SCALER 0x00000800 +#define chipFeatures_HIGH_DYNAMIC_RANGE 0x00001000 +#define chipFeatures_YUV420_TILER 0x00002000 +#define chipFeatures_MODULE_CG 0x00004000 +#define chipFeatures_MIN_AREA 0x00008000 +#define chipFeatures_NO_EARLY_Z 0x00010000 +#define chipFeatures_NO_422_TEXTURE 0x00020000 +#define chipFeatures_BUFFER_INTERLEAVING 0x00040000 +#define chipFeatures_BYTE_WRITE_2D 0x00080000 +#define chipFeatures_NO_SCALER 0x00100000 +#define chipFeatures_YUY2_AVERAGING 0x00200000 +#define chipFeatures_HALF_PE_CACHE 0x00400000 +#define chipFeatures_HALF_TX_CACHE 0x00800000 +#define chipFeatures_YUY2_RENDER_TARGET 0x01000000 +#define chipFeatures_MEM32 0x02000000 +#define chipFeatures_PIPE_VG 0x04000000 +#define chipFeatures_VGTS 0x08000000 +#define chipFeatures_FE20 0x10000000 +#define chipFeatures_BYTE_WRITE_3D 0x20000000 +#define chipFeatures_RS_YUV_TARGET 0x40000000 +#define chipFeatures_32_BIT_INDICES 0x80000000 +#define chipMinorFeatures0_FLIP_Y 0x00000001 +#define chipMinorFeatures0_DUAL_RETURN_BUS 0x00000002 +#define chipMinorFeatures0_ENDIANNESS_CONFIG 0x00000004 +#define chipMinorFeatures0_TEXTURE_8K 0x00000008 +#define chipMinorFeatures0_CORRECT_TEXTURE_CONVERTER 0x00000010 +#define chipMinorFeatures0_SPECIAL_MSAA_LOD 0x00000020 +#define chipMinorFeatures0_FAST_CLEAR_FLUSH 0x00000040 +#define chipMinorFeatures0_2DPE20 0x00000080 +#define chipMinorFeatures0_CORRECT_AUTO_DISABLE 0x00000100 +#define chipMinorFeatures0_RENDERTARGET_8K 0x00000200 +#define chipMinorFeatures0_2BITPERTILE 0x00000400 +#define chipMinorFeatures0_SEPARATE_TILE_STATUS_WHEN_INTERLEAVED 0x00000800 +#define chipMinorFeatures0_SUPER_TILED 0x00001000 +#define chipMinorFeatures0_VG_20 0x00002000 +#define chipMinorFeatures0_TS_EXTENDED_COMMANDS 0x00004000 +#define chipMinorFeatures0_COMPRESSION_FIFO_FIXED 0x00008000 +#define chipMinorFeatures0_HAS_SIGN_FLOOR_CEIL 0x00010000 +#define chipMinorFeatures0_VG_FILTER 0x00020000 +#define chipMinorFeatures0_VG_21 0x00040000 +#define chipMinorFeatures0_SHADER_HAS_W 0x00080000 +#define chipMinorFeatures0_HAS_SQRT_TRIG 0x00100000 +#define chipMinorFeatures0_MORE_MINOR_FEATURES 0x00200000 +#define chipMinorFeatures0_MC20 0x00400000 +#define chipMinorFeatures0_MSAA_SIDEBAND 0x00800000 +#define chipMinorFeatures0_BUG_FIXES0 0x01000000 +#define chipMinorFeatures0_VAA 0x02000000 +#define chipMinorFeatures0_BYPASS_IN_MSAA 0x04000000 +#define chipMinorFeatures0_HZ 0x08000000 +#define chipMinorFeatures0_NEW_TEXTURE 0x10000000 +#define chipMinorFeatures0_2D_A8_TARGET 0x20000000 +#define chipMinorFeatures0_CORRECT_STENCIL 0x40000000 +#define chipMinorFeatures0_ENHANCE_VR 0x80000000 +#define chipMinorFeatures1_RSUV_SWIZZLE 0x00000001 +#define chipMinorFeatures1_V2_COMPRESSION 0x00000002 +#define chipMinorFeatures1_VG_DOUBLE_BUFFER 0x00000004 +#define chipMinorFeatures1_EXTRA_EVENT_STATES 0x00000008 +#define chipMinorFeatures1_NO_STRIPING_NEEDED 0x00000010 +#define chipMinorFeatures1_TEXTURE_STRIDE 0x00000020 +#define chipMinorFeatures1_BUG_FIXES3 0x00000040 +#define chipMinorFeatures1_AUTO_DISABLE 0x00000080 +#define chipMinorFeatures1_AUTO_RESTART_TS 0x00000100 +#define chipMinorFeatures1_DISABLE_PE_GATING 0x00000200 +#define chipMinorFeatures1_L2_WINDOWING 0x00000400 +#define chipMinorFeatures1_HALF_FLOAT 0x00000800 +#define chipMinorFeatures1_PIXEL_DITHER 0x00001000 +#define chipMinorFeatures1_TWO_STENCIL_REFERENCE 0x00002000 +#define chipMinorFeatures1_EXTENDED_PIXEL_FORMAT 0x00004000 +#define chipMinorFeatures1_CORRECT_MIN_MAX_DEPTH 0x00008000 +#define chipMinorFeatures1_2D_DITHER 0x00010000 +#define chipMinorFeatures1_BUG_FIXES5 0x00020000 +#define chipMinorFeatures1_NEW_2D 0x00040000 +#define chipMinorFeatures1_NEW_FP 0x00080000 +#define chipMinorFeatures1_TEXTURE_HALIGN 0x00100000 +#define chipMinorFeatures1_NON_POWER_OF_TWO 0x00200000 +#define chipMinorFeatures1_LINEAR_TEXTURE_SUPPORT 0x00400000 +#define chipMinorFeatures1_HALTI0 0x00800000 +#define chipMinorFeatures1_CORRECT_OVERFLOW_VG 0x01000000 +#define chipMinorFeatures1_NEGATIVE_LOG_FIX 0x02000000 +#define chipMinorFeatures1_RESOLVE_OFFSET 0x04000000 +#define chipMinorFeatures1_OK_TO_GATE_AXI_CLOCK 0x08000000 +#define chipMinorFeatures1_MMU_VERSION 0x10000000 +#define chipMinorFeatures1_WIDE_LINE 0x20000000 +#define chipMinorFeatures1_BUG_FIXES6 0x40000000 +#define chipMinorFeatures1_FC_FLUSH_STALL 0x80000000 +#define chipMinorFeatures2_LINE_LOOP 0x00000001 +#define chipMinorFeatures2_LOGIC_OP 0x00000002 +#define chipMinorFeatures2_UNK2 0x00000004 +#define chipMinorFeatures2_SUPERTILED_TEXTURE 0x00000008 +#define chipMinorFeatures2_UNK4 0x00000010 +#define chipMinorFeatures2_RECT_PRIMITIVE 0x00000020 +#define chipMinorFeatures2_COMPOSITION 0x00000040 +#define chipMinorFeatures2_CORRECT_AUTO_DISABLE_COUNT 0x00000080 +#define chipMinorFeatures2_UNK8 0x00000100 +#define chipMinorFeatures2_UNK9 0x00000200 +#define chipMinorFeatures2_UNK10 0x00000400 +#define chipMinorFeatures2_HALTI1 0x00000800 +#define chipMinorFeatures2_UNK12 0x00001000 +#define chipMinorFeatures2_UNK13 0x00002000 +#define chipMinorFeatures2_UNK14 0x00004000 +#define chipMinorFeatures2_EXTRA_TEXTURE_STATE 0x00008000 +#define chipMinorFeatures2_FULL_DIRECTFB 0x00010000 +#define chipMinorFeatures2_2D_TILING 0x00020000 +#define chipMinorFeatures2_THREAD_WALKER_IN_PS 0x00040000 +#define chipMinorFeatures2_TILE_FILLER 0x00080000 +#define chipMinorFeatures2_UNK20 0x00100000 +#define chipMinorFeatures2_2D_MULTI_SOURCE_BLIT 0x00200000 +#define chipMinorFeatures2_UNK22 0x00400000 +#define chipMinorFeatures2_UNK23 0x00800000 +#define chipMinorFeatures2_UNK24 0x01000000 +#define chipMinorFeatures2_MIXED_STREAMS 0x02000000 +#define chipMinorFeatures2_2D_420_L2CACHE 0x04000000 +#define chipMinorFeatures2_UNK27 0x08000000 +#define chipMinorFeatures2_2D_NO_INDEX8_BRUSH 0x10000000 +#define chipMinorFeatures2_TEXTURE_TILED_READ 0x20000000 +#define chipMinorFeatures2_UNK30 0x40000000 +#define chipMinorFeatures2_UNK31 0x80000000 +#define chipMinorFeatures3_ROTATION_STALL_FIX 0x00000001 +#define chipMinorFeatures3_UNK1 0x00000002 +#define chipMinorFeatures3_2D_MULTI_SOURCE_BLT_EX 0x00000004 +#define chipMinorFeatures3_UNK3 0x00000008 +#define chipMinorFeatures3_UNK4 0x00000010 +#define chipMinorFeatures3_UNK5 0x00000020 +#define chipMinorFeatures3_UNK6 0x00000040 +#define chipMinorFeatures3_UNK7 0x00000080 +#define chipMinorFeatures3_FAST_MSAA 0x00000100 +#define chipMinorFeatures3_UNK9 0x00000200 +#define chipMinorFeatures3_BUG_FIXES10 0x00000400 +#define chipMinorFeatures3_UNK11 0x00000800 +#define chipMinorFeatures3_BUG_FIXES11 0x00001000 +#define chipMinorFeatures3_UNK13 0x00002000 +#define chipMinorFeatures3_UNK14 0x00004000 +#define chipMinorFeatures3_UNK15 0x00008000 +#define chipMinorFeatures3_UNK16 0x00010000 +#define chipMinorFeatures3_UNK17 0x00020000 +#define chipMinorFeatures3_ACE 0x00040000 +#define chipMinorFeatures3_UNK19 0x00080000 +#define chipMinorFeatures3_UNK20 0x00100000 +#define chipMinorFeatures3_UNK21 0x00200000 +#define chipMinorFeatures3_UNK22 0x00400000 +#define chipMinorFeatures3_UNK23 0x00800000 +#define chipMinorFeatures3_UNK24 0x01000000 +#define chipMinorFeatures3_UNK25 0x02000000 +#define chipMinorFeatures3_NEW_HZ 0x04000000 +#define chipMinorFeatures3_UNK27 0x08000000 +#define chipMinorFeatures3_UNK28 0x10000000 +#define chipMinorFeatures3_UNK29 0x20000000 +#define chipMinorFeatures3_UNK30 0x40000000 +#define chipMinorFeatures3_UNK31 0x80000000 +#define chipMinorFeatures4_UNK0 0x00000001 +#define chipMinorFeatures4_UNK1 0x00000002 +#define chipMinorFeatures4_UNK2 0x00000004 +#define chipMinorFeatures4_UNK3 0x00000008 +#define chipMinorFeatures4_UNK4 0x00000010 +#define chipMinorFeatures4_UNK5 0x00000020 +#define chipMinorFeatures4_UNK6 0x00000040 +#define chipMinorFeatures4_UNK7 0x00000080 +#define chipMinorFeatures4_UNK8 0x00000100 +#define chipMinorFeatures4_UNK9 0x00000200 +#define chipMinorFeatures4_UNK10 0x00000400 +#define chipMinorFeatures4_UNK11 0x00000800 +#define chipMinorFeatures4_UNK12 0x00001000 +#define chipMinorFeatures4_UNK13 0x00002000 +#define chipMinorFeatures4_UNK14 0x00004000 +#define chipMinorFeatures4_UNK15 0x00008000 +#define chipMinorFeatures4_HALTI2 0x00010000 +#define chipMinorFeatures4_UNK17 0x00020000 +#define chipMinorFeatures4_SMALL_MSAA 0x00040000 +#define chipMinorFeatures4_UNK19 0x00080000 +#define chipMinorFeatures4_UNK20 0x00100000 +#define chipMinorFeatures4_UNK21 0x00200000 +#define chipMinorFeatures4_UNK22 0x00400000 +#define chipMinorFeatures4_UNK23 0x00800000 +#define chipMinorFeatures4_UNK24 0x01000000 +#define chipMinorFeatures4_UNK25 0x02000000 +#define chipMinorFeatures4_UNK26 0x04000000 +#define chipMinorFeatures4_UNK27 0x08000000 +#define chipMinorFeatures4_UNK28 0x10000000 +#define chipMinorFeatures4_UNK29 0x20000000 +#define chipMinorFeatures4_UNK30 0x40000000 +#define chipMinorFeatures4_UNK31 0x80000000 +#define chipMinorFeatures5_UNK0 0x00000001 +#define chipMinorFeatures5_UNK1 0x00000002 +#define chipMinorFeatures5_UNK2 0x00000004 +#define chipMinorFeatures5_UNK3 0x00000008 +#define chipMinorFeatures5_UNK4 0x00000010 +#define chipMinorFeatures5_UNK5 0x00000020 +#define chipMinorFeatures5_UNK6 0x00000040 +#define chipMinorFeatures5_UNK7 0x00000080 +#define chipMinorFeatures5_UNK8 0x00000100 +#define chipMinorFeatures5_HALTI3 0x00000200 +#define chipMinorFeatures5_UNK10 0x00000400 +#define chipMinorFeatures5_UNK11 0x00000800 +#define chipMinorFeatures5_UNK12 0x00001000 +#define chipMinorFeatures5_UNK13 0x00002000 +#define chipMinorFeatures5_UNK14 0x00004000 +#define chipMinorFeatures5_UNK15 0x00008000 +#define chipMinorFeatures5_UNK16 0x00010000 +#define chipMinorFeatures5_UNK17 0x00020000 +#define chipMinorFeatures5_UNK18 0x00040000 +#define chipMinorFeatures5_UNK19 0x00080000 +#define chipMinorFeatures5_UNK20 0x00100000 +#define chipMinorFeatures5_UNK21 0x00200000 +#define chipMinorFeatures5_UNK22 0x00400000 +#define chipMinorFeatures5_UNK23 0x00800000 +#define chipMinorFeatures5_UNK24 0x01000000 +#define chipMinorFeatures5_UNK25 0x02000000 +#define chipMinorFeatures5_UNK26 0x04000000 +#define chipMinorFeatures5_UNK27 0x08000000 +#define chipMinorFeatures5_UNK28 0x10000000 +#define chipMinorFeatures5_UNK29 0x20000000 +#define chipMinorFeatures5_UNK30 0x40000000 +#define chipMinorFeatures5_UNK31 0x80000000 + +#endif /* COMMON_XML */ diff --git b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c new file mode 100644 index 0000000..332c55e --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c @@ -0,0 +1,268 @@ +/* + * Copyright (C) 2014 Etnaviv Project + * Author: Christian Gmeiner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "etnaviv_gpu.h" +#include "etnaviv_gem.h" +#include "etnaviv_mmu.h" + +#include "common.xml.h" +#include "state.xml.h" +#include "cmdstream.xml.h" + +/* + * Command Buffer helper: + */ + + +static inline void OUT(struct etnaviv_cmdbuf *buffer, u32 data) +{ + u32 *vaddr = (u32 *)buffer->vaddr; + + BUG_ON(buffer->user_size >= buffer->size); + + vaddr[buffer->user_size / 4] = data; + buffer->user_size += 4; +} + +static inline void CMD_LOAD_STATE(struct etnaviv_cmdbuf *buffer, + u32 reg, u32 value) +{ + u32 index = reg >> VIV_FE_LOAD_STATE_HEADER_OFFSET__SHR; + + buffer->user_size = ALIGN(buffer->user_size, 8); + + /* write a register via cmd stream */ + OUT(buffer, VIV_FE_LOAD_STATE_HEADER_OP_LOAD_STATE | + VIV_FE_LOAD_STATE_HEADER_COUNT(1) | + VIV_FE_LOAD_STATE_HEADER_OFFSET(index)); + OUT(buffer, value); +} + +static inline void CMD_END(struct etnaviv_cmdbuf *buffer) +{ + buffer->user_size = ALIGN(buffer->user_size, 8); + + OUT(buffer, VIV_FE_END_HEADER_OP_END); +} + +static inline void CMD_WAIT(struct etnaviv_cmdbuf *buffer) +{ + buffer->user_size = ALIGN(buffer->user_size, 8); + + OUT(buffer, VIV_FE_WAIT_HEADER_OP_WAIT | 200); +} + +static inline void CMD_LINK(struct etnaviv_cmdbuf *buffer, + u16 prefetch, u32 address) +{ + buffer->user_size = ALIGN(buffer->user_size, 8); + + OUT(buffer, VIV_FE_LINK_HEADER_OP_LINK | + VIV_FE_LINK_HEADER_PREFETCH(prefetch)); + OUT(buffer, address); +} + +static inline void CMD_STALL(struct etnaviv_cmdbuf *buffer, + u32 from, u32 to) +{ + buffer->user_size = ALIGN(buffer->user_size, 8); + + OUT(buffer, VIV_FE_STALL_HEADER_OP_STALL); + OUT(buffer, VIV_FE_STALL_TOKEN_FROM(from) | VIV_FE_STALL_TOKEN_TO(to)); +} + +static void etnaviv_cmd_select_pipe(struct etnaviv_cmdbuf *buffer, u8 pipe) +{ + u32 flush; + u32 stall; + + /* + * This assumes that if we're switching to 2D, we're switching + * away from 3D, and vice versa. Hence, if we're switching to + * the 2D core, we need to flush the 3D depth and color caches, + * otherwise we need to flush the 2D pixel engine cache. + */ + if (pipe == ETNA_PIPE_2D) + flush = VIVS_GL_FLUSH_CACHE_DEPTH | VIVS_GL_FLUSH_CACHE_COLOR; + else + flush = VIVS_GL_FLUSH_CACHE_PE2D; + + stall = VIVS_GL_SEMAPHORE_TOKEN_FROM(SYNC_RECIPIENT_FE) | + VIVS_GL_SEMAPHORE_TOKEN_TO(SYNC_RECIPIENT_PE); + + CMD_LOAD_STATE(buffer, VIVS_GL_FLUSH_CACHE, flush); + CMD_LOAD_STATE(buffer, VIVS_GL_SEMAPHORE_TOKEN, stall); + + CMD_STALL(buffer, SYNC_RECIPIENT_FE, SYNC_RECIPIENT_PE); + + CMD_LOAD_STATE(buffer, VIVS_GL_PIPE_SELECT, + VIVS_GL_PIPE_SELECT_PIPE(pipe)); +} + +static u32 gpu_va(struct etnaviv_gpu *gpu, struct etnaviv_cmdbuf *buf) +{ + return buf->paddr - gpu->memory_base; +} + +static void etnaviv_buffer_dump(struct etnaviv_gpu *gpu, + struct etnaviv_cmdbuf *buf, u32 off, u32 len) +{ + u32 size = buf->size; + u32 *ptr = buf->vaddr + off; + + dev_info(gpu->dev, "virt %p phys 0x%08x free 0x%08x\n", + ptr, gpu_va(gpu, buf) + off, size - len * 4 - off); + + print_hex_dump(KERN_INFO, "cmd ", DUMP_PREFIX_OFFSET, 16, 4, + ptr, len * 4, 0); +} + +u16 etnaviv_buffer_init(struct etnaviv_gpu *gpu) +{ + struct etnaviv_cmdbuf *buffer = gpu->buffer; + + /* initialize buffer */ + buffer->user_size = 0; + + CMD_WAIT(buffer); + CMD_LINK(buffer, 2, gpu_va(gpu, buffer) + buffer->user_size - 4); + + return buffer->user_size / 8; +} + +void etnaviv_buffer_end(struct etnaviv_gpu *gpu) +{ + struct etnaviv_cmdbuf *buffer = gpu->buffer; + + /* Replace the last WAIT with an END */ + buffer->user_size -= 16; + + CMD_END(buffer); + mb(); +} + +void etnaviv_buffer_queue(struct etnaviv_gpu *gpu, unsigned int event, + struct etnaviv_cmdbuf *cmdbuf) +{ + struct etnaviv_cmdbuf *buffer = gpu->buffer; + u32 *lw = buffer->vaddr + buffer->user_size - 16; + u32 back, link_target, link_size, reserve_size, extra_size = 0; + + if (drm_debug & DRM_UT_DRIVER) + etnaviv_buffer_dump(gpu, buffer, 0, 0x50); + + /* + * If we need to flush the MMU prior to submitting this buffer, we + * will need to append a mmu flush load state, followed by a new + * link to this buffer - a total of four additional words. + */ + if (gpu->mmu->need_flush || gpu->switch_context) { + /* link command */ + extra_size += 2; + /* flush command */ + if (gpu->mmu->need_flush) + extra_size += 2; + /* pipe switch commands */ + if (gpu->switch_context) + extra_size += 8; + } + + reserve_size = (6 + extra_size) * 4; + + /* + * if we are going to completely overflow the buffer, we need to wrap. + */ + if (buffer->user_size + reserve_size > buffer->size) + buffer->user_size = 0; + + /* save offset back into main buffer */ + back = buffer->user_size + reserve_size - 6 * 4; + link_target = gpu_va(gpu, buffer) + buffer->user_size; + link_size = 6; + + /* Skip over any extra instructions */ + link_target += extra_size * sizeof(u32); + + if (drm_debug & DRM_UT_DRIVER) + pr_info("stream link to 0x%08x @ 0x%08x %p\n", + link_target, gpu_va(gpu, cmdbuf), cmdbuf->vaddr); + + /* jump back from cmd to main buffer */ + CMD_LINK(cmdbuf, link_size, link_target); + + link_target = gpu_va(gpu, cmdbuf); + link_size = cmdbuf->size / 8; + + + + if (drm_debug & DRM_UT_DRIVER) { + print_hex_dump(KERN_INFO, "cmd ", DUMP_PREFIX_OFFSET, 16, 4, + cmdbuf->vaddr, cmdbuf->size, 0); + + pr_info("link op: %p\n", lw); + pr_info("link addr: %p\n", lw + 1); + pr_info("addr: 0x%08x\n", link_target); + pr_info("back: 0x%08x\n", gpu_va(gpu, buffer) + back); + pr_info("event: %d\n", event); + } + + if (gpu->mmu->need_flush || gpu->switch_context) { + u32 new_target = gpu_va(gpu, buffer) + buffer->user_size; + + if (gpu->mmu->need_flush) { + /* Add the MMU flush */ + CMD_LOAD_STATE(buffer, VIVS_GL_FLUSH_MMU, + VIVS_GL_FLUSH_MMU_FLUSH_FEMMU | + VIVS_GL_FLUSH_MMU_FLUSH_UNK1 | + VIVS_GL_FLUSH_MMU_FLUSH_UNK2 | + VIVS_GL_FLUSH_MMU_FLUSH_PEMMU | + VIVS_GL_FLUSH_MMU_FLUSH_UNK4); + + gpu->mmu->need_flush = false; + } + + if (gpu->switch_context) { + etnaviv_cmd_select_pipe(buffer, cmdbuf->exec_state); + gpu->switch_context = false; + } + + /* And the link to the first buffer */ + CMD_LINK(buffer, link_size, link_target); + + /* Update the link target to point to above instructions */ + link_target = new_target; + link_size = extra_size; + } + + /* trigger event */ + CMD_LOAD_STATE(buffer, VIVS_GL_EVENT, VIVS_GL_EVENT_EVENT_ID(event) | + VIVS_GL_EVENT_FROM_PE); + + /* append WAIT/LINK to main buffer */ + CMD_WAIT(buffer); + CMD_LINK(buffer, 2, gpu_va(gpu, buffer) + (buffer->user_size - 4)); + + /* Change WAIT into a LINK command; write the address first. */ + *(lw + 1) = link_target; + mb(); + *(lw) = VIV_FE_LINK_HEADER_OP_LINK | + VIV_FE_LINK_HEADER_PREFETCH(link_size); + mb(); + + if (drm_debug & DRM_UT_DRIVER) + etnaviv_buffer_dump(gpu, buffer, 0, 0x50); +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_cmd_parser.c b/drivers/gpu/drm/etnaviv/etnaviv_cmd_parser.c new file mode 100644 index 0000000..dcfd565 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_cmd_parser.c @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include + +#include "etnaviv_gem.h" +#include "etnaviv_gpu.h" + +#include "cmdstream.xml.h" + +#define EXTRACT(val, field) (((val) & field##__MASK) >> field##__SHIFT) + +struct etna_validation_state { + struct etnaviv_gpu *gpu; + const struct drm_etnaviv_gem_submit_reloc *relocs; + unsigned int num_relocs; + u32 *start; +}; + +static const struct { + u16 offset; + u16 size; +} etnaviv_sensitive_states[] __initconst = { +#define ST(start, num) { (start) >> 2, (num) } + /* 2D */ + ST(0x1200, 1), + ST(0x1228, 1), + ST(0x1238, 1), + ST(0x1284, 1), + ST(0x128c, 1), + ST(0x1304, 1), + ST(0x1310, 1), + ST(0x1318, 1), + ST(0x12800, 4), + ST(0x128a0, 4), + ST(0x128c0, 4), + ST(0x12970, 4), + ST(0x12a00, 8), + ST(0x12b40, 8), + ST(0x12b80, 8), + ST(0x12ce0, 8), + /* 3D */ + ST(0x0644, 1), + ST(0x064c, 1), + ST(0x0680, 8), + ST(0x1410, 1), + ST(0x1430, 1), + ST(0x1458, 1), + ST(0x1460, 8), + ST(0x1480, 8), + ST(0x1500, 8), + ST(0x1520, 8), + ST(0x1608, 1), + ST(0x1610, 1), + ST(0x1658, 1), + ST(0x165c, 1), + ST(0x1664, 1), + ST(0x1668, 1), + ST(0x16a4, 1), + ST(0x16c0, 8), + ST(0x16e0, 8), + ST(0x1740, 8), + ST(0x2400, 14 * 16), + ST(0x10800, 32 * 16), +#undef ST +}; + +#define ETNAVIV_STATES_SIZE (VIV_FE_LOAD_STATE_HEADER_OFFSET__MASK + 1u) +static DECLARE_BITMAP(etnaviv_states, ETNAVIV_STATES_SIZE); + +void __init etnaviv_validate_init(void) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(etnaviv_sensitive_states); i++) + bitmap_set(etnaviv_states, etnaviv_sensitive_states[i].offset, + etnaviv_sensitive_states[i].size); +} + +static void etnaviv_warn_if_non_sensitive(struct etna_validation_state *state, + unsigned int buf_offset, unsigned int state_addr) +{ + if (state->num_relocs && state->relocs->submit_offset < buf_offset) { + dev_warn_once(state->gpu->dev, + "%s: relocation for non-sensitive state 0x%x at offset %u\n", + __func__, state_addr, + state->relocs->submit_offset); + while (state->num_relocs && + state->relocs->submit_offset < buf_offset) { + state->relocs++; + state->num_relocs--; + } + } +} + +static bool etnaviv_validate_load_state(struct etna_validation_state *state, + u32 *ptr, unsigned int state_offset, unsigned int num) +{ + unsigned int size = min(ETNAVIV_STATES_SIZE, state_offset + num); + unsigned int st_offset = state_offset, buf_offset; + + for_each_set_bit_from(st_offset, etnaviv_states, size) { + buf_offset = (ptr - state->start + + st_offset - state_offset) * 4; + + etnaviv_warn_if_non_sensitive(state, buf_offset, st_offset * 4); + if (state->num_relocs && + state->relocs->submit_offset == buf_offset) { + state->relocs++; + state->num_relocs--; + continue; + } + + dev_warn_ratelimited(state->gpu->dev, + "%s: load state touches restricted state 0x%x at offset %u\n", + __func__, st_offset * 4, buf_offset); + return false; + } + + if (state->num_relocs) { + buf_offset = (ptr - state->start + num) * 4; + etnaviv_warn_if_non_sensitive(state, buf_offset, st_offset * 4 + + state->relocs->submit_offset - + buf_offset); + } + + return true; +} + +static uint8_t cmd_length[32] = { + [FE_OPCODE_DRAW_PRIMITIVES] = 4, + [FE_OPCODE_DRAW_INDEXED_PRIMITIVES] = 6, + [FE_OPCODE_NOP] = 2, + [FE_OPCODE_STALL] = 2, +}; + +bool etnaviv_cmd_validate_one(struct etnaviv_gpu *gpu, u32 *stream, + unsigned int size, + struct drm_etnaviv_gem_submit_reloc *relocs, + unsigned int reloc_size) +{ + struct etna_validation_state state; + u32 *buf = stream; + u32 *end = buf + size; + + state.gpu = gpu; + state.relocs = relocs; + state.num_relocs = reloc_size; + state.start = stream; + + while (buf < end) { + u32 cmd = *buf; + unsigned int len, n, off; + unsigned int op = cmd >> 27; + + switch (op) { + case FE_OPCODE_LOAD_STATE: + n = EXTRACT(cmd, VIV_FE_LOAD_STATE_HEADER_COUNT); + len = ALIGN(1 + n, 2); + if (buf + len > end) + break; + + off = EXTRACT(cmd, VIV_FE_LOAD_STATE_HEADER_OFFSET); + if (!etnaviv_validate_load_state(&state, buf + 1, + off, n)) + return false; + break; + + case FE_OPCODE_DRAW_2D: + n = EXTRACT(cmd, VIV_FE_DRAW_2D_HEADER_COUNT); + if (n == 0) + n = 256; + len = 2 + n * 2; + break; + + default: + len = cmd_length[op]; + if (len == 0) { + dev_err(gpu->dev, "%s: op %u not permitted at offset %tu\n", + __func__, op, buf - state.start); + return false; + } + break; + } + + buf += len; + } + + if (buf > end) { + dev_err(gpu->dev, "%s: commands overflow end of buffer: %tu > %u\n", + __func__, buf - state.start, size); + return false; + } + + return true; +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c new file mode 100644 index 0000000..e885898 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c @@ -0,0 +1,706 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include + +#include "etnaviv_drv.h" +#include "etnaviv_gpu.h" +#include "etnaviv_gem.h" +#include "etnaviv_mmu.h" +#include "etnaviv_gem.h" + +#ifdef CONFIG_DRM_ETNAVIV_REGISTER_LOGGING +static bool reglog; +MODULE_PARM_DESC(reglog, "Enable register read/write logging"); +module_param(reglog, bool, 0600); +#else +#define reglog 0 +#endif + +void __iomem *etnaviv_ioremap(struct platform_device *pdev, const char *name, + const char *dbgname) +{ + struct resource *res; + void __iomem *ptr; + + if (name) + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); + else + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + ptr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ptr)) { + dev_err(&pdev->dev, "failed to ioremap %s: %ld\n", name, + PTR_ERR(ptr)); + return ptr; + } + + if (reglog) + dev_printk(KERN_DEBUG, &pdev->dev, "IO:region %s 0x%p %08zx\n", + dbgname, ptr, (size_t)resource_size(res)); + + return ptr; +} + +void etnaviv_writel(u32 data, void __iomem *addr) +{ + if (reglog) + printk(KERN_DEBUG "IO:W %p %08x\n", addr, data); + + writel(data, addr); +} + +u32 etnaviv_readl(const void __iomem *addr) +{ + u32 val = readl(addr); + + if (reglog) + printk(KERN_DEBUG "IO:R %p %08x\n", addr, val); + + return val; +} + +/* + * DRM operations: + */ + + +static void load_gpu(struct drm_device *dev) +{ + struct etnaviv_drm_private *priv = dev->dev_private; + unsigned int i; + + for (i = 0; i < ETNA_MAX_PIPES; i++) { + struct etnaviv_gpu *g = priv->gpu[i]; + + if (g) { + int ret; + + ret = etnaviv_gpu_init(g); + if (ret) { + dev_err(g->dev, "hw init failed: %d\n", ret); + priv->gpu[i] = NULL; + } + } + } +} + +static int etnaviv_open(struct drm_device *dev, struct drm_file *file) +{ + struct etnaviv_file_private *ctx; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + file->driver_priv = ctx; + + return 0; +} + +static void etnaviv_preclose(struct drm_device *dev, struct drm_file *file) +{ + struct etnaviv_drm_private *priv = dev->dev_private; + struct etnaviv_file_private *ctx = file->driver_priv; + unsigned int i; + + for (i = 0; i < ETNA_MAX_PIPES; i++) { + struct etnaviv_gpu *gpu = priv->gpu[i]; + + if (gpu) { + mutex_lock(&gpu->lock); + if (gpu->lastctx == ctx) + gpu->lastctx = NULL; + mutex_unlock(&gpu->lock); + } + } + + kfree(ctx); +} + +/* + * DRM debugfs: + */ + +#ifdef CONFIG_DEBUG_FS +static int etnaviv_gem_show(struct drm_device *dev, struct seq_file *m) +{ + struct etnaviv_drm_private *priv = dev->dev_private; + + etnaviv_gem_describe_objects(priv, m); + + return 0; +} + +static int etnaviv_mm_show(struct drm_device *dev, struct seq_file *m) +{ + int ret; + + read_lock(&dev->vma_offset_manager->vm_lock); + ret = drm_mm_dump_table(m, &dev->vma_offset_manager->vm_addr_space_mm); + read_unlock(&dev->vma_offset_manager->vm_lock); + + return ret; +} + +static int etnaviv_mmu_show(struct etnaviv_gpu *gpu, struct seq_file *m) +{ + seq_printf(m, "Active Objects (%s):\n", dev_name(gpu->dev)); + + mutex_lock(&gpu->mmu->lock); + drm_mm_dump_table(m, &gpu->mmu->mm); + mutex_unlock(&gpu->mmu->lock); + + return 0; +} + +static void etnaviv_buffer_dump(struct etnaviv_gpu *gpu, struct seq_file *m) +{ + struct etnaviv_cmdbuf *buf = gpu->buffer; + u32 size = buf->size; + u32 *ptr = buf->vaddr; + u32 i; + + seq_printf(m, "virt %p - phys 0x%llx - free 0x%08x\n", + buf->vaddr, (u64)buf->paddr, size - buf->user_size); + + for (i = 0; i < size / 4; i++) { + if (i && !(i % 4)) + seq_puts(m, "\n"); + if (i % 4 == 0) + seq_printf(m, "\t0x%p: ", ptr + i); + seq_printf(m, "%08x ", *(ptr + i)); + } + seq_puts(m, "\n"); +} + +static int etnaviv_ring_show(struct etnaviv_gpu *gpu, struct seq_file *m) +{ + seq_printf(m, "Ring Buffer (%s): ", dev_name(gpu->dev)); + + mutex_lock(&gpu->lock); + etnaviv_buffer_dump(gpu, m); + mutex_unlock(&gpu->lock); + + return 0; +} + +static int show_unlocked(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + int (*show)(struct drm_device *dev, struct seq_file *m) = + node->info_ent->data; + + return show(dev, m); +} + +static int show_each_gpu(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct etnaviv_drm_private *priv = dev->dev_private; + struct etnaviv_gpu *gpu; + int (*show)(struct etnaviv_gpu *gpu, struct seq_file *m) = + node->info_ent->data; + unsigned int i; + int ret = 0; + + for (i = 0; i < ETNA_MAX_PIPES; i++) { + gpu = priv->gpu[i]; + if (!gpu) + continue; + + ret = show(gpu, m); + if (ret < 0) + break; + } + + return ret; +} + +static struct drm_info_list etnaviv_debugfs_list[] = { + {"gpu", show_each_gpu, 0, etnaviv_gpu_debugfs}, + {"gem", show_unlocked, 0, etnaviv_gem_show}, + { "mm", show_unlocked, 0, etnaviv_mm_show }, + {"mmu", show_each_gpu, 0, etnaviv_mmu_show}, + {"ring", show_each_gpu, 0, etnaviv_ring_show}, +}; + +static int etnaviv_debugfs_init(struct drm_minor *minor) +{ + struct drm_device *dev = minor->dev; + int ret; + + ret = drm_debugfs_create_files(etnaviv_debugfs_list, + ARRAY_SIZE(etnaviv_debugfs_list), + minor->debugfs_root, minor); + + if (ret) { + dev_err(dev->dev, "could not install etnaviv_debugfs_list\n"); + return ret; + } + + return ret; +} + +static void etnaviv_debugfs_cleanup(struct drm_minor *minor) +{ + drm_debugfs_remove_files(etnaviv_debugfs_list, + ARRAY_SIZE(etnaviv_debugfs_list), minor); +} +#endif + +/* + * DRM ioctls: + */ + +static int etnaviv_ioctl_get_param(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct etnaviv_drm_private *priv = dev->dev_private; + struct drm_etnaviv_param *args = data; + struct etnaviv_gpu *gpu; + + if (args->pipe >= ETNA_MAX_PIPES) + return -EINVAL; + + gpu = priv->gpu[args->pipe]; + if (!gpu) + return -ENXIO; + + return etnaviv_gpu_get_param(gpu, args->param, &args->value); +} + +static int etnaviv_ioctl_gem_new(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct drm_etnaviv_gem_new *args = data; + + if (args->flags & ~(ETNA_BO_CACHED | ETNA_BO_WC | ETNA_BO_UNCACHED | + ETNA_BO_FORCE_MMU)) + return -EINVAL; + + return etnaviv_gem_new_handle(dev, file, args->size, + args->flags, &args->handle); +} + +#define TS(t) ((struct timespec){ \ + .tv_sec = (t).tv_sec, \ + .tv_nsec = (t).tv_nsec \ +}) + +static int etnaviv_ioctl_gem_cpu_prep(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct drm_etnaviv_gem_cpu_prep *args = data; + struct drm_gem_object *obj; + int ret; + + if (args->op & ~(ETNA_PREP_READ | ETNA_PREP_WRITE | ETNA_PREP_NOSYNC)) + return -EINVAL; + + obj = drm_gem_object_lookup(dev, file, args->handle); + if (!obj) + return -ENOENT; + + ret = etnaviv_gem_cpu_prep(obj, args->op, &TS(args->timeout)); + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +static int etnaviv_ioctl_gem_cpu_fini(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct drm_etnaviv_gem_cpu_fini *args = data; + struct drm_gem_object *obj; + int ret; + + if (args->flags) + return -EINVAL; + + obj = drm_gem_object_lookup(dev, file, args->handle); + if (!obj) + return -ENOENT; + + ret = etnaviv_gem_cpu_fini(obj); + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +static int etnaviv_ioctl_gem_info(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct drm_etnaviv_gem_info *args = data; + struct drm_gem_object *obj; + int ret; + + if (args->pad) + return -EINVAL; + + obj = drm_gem_object_lookup(dev, file, args->handle); + if (!obj) + return -ENOENT; + + ret = etnaviv_gem_mmap_offset(obj, &args->offset); + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +static int etnaviv_ioctl_wait_fence(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct drm_etnaviv_wait_fence *args = data; + struct etnaviv_drm_private *priv = dev->dev_private; + struct timespec *timeout = &TS(args->timeout); + struct etnaviv_gpu *gpu; + + if (args->flags & ~(ETNA_WAIT_NONBLOCK)) + return -EINVAL; + + if (args->pipe >= ETNA_MAX_PIPES) + return -EINVAL; + + gpu = priv->gpu[args->pipe]; + if (!gpu) + return -ENXIO; + + if (args->flags & ETNA_WAIT_NONBLOCK) + timeout = NULL; + + return etnaviv_gpu_wait_fence_interruptible(gpu, args->fence, + timeout); +} + +static int etnaviv_ioctl_gem_userptr(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct drm_etnaviv_gem_userptr *args = data; + int access; + + if (args->flags & ~(ETNA_USERPTR_READ|ETNA_USERPTR_WRITE) || + args->flags == 0) + return -EINVAL; + + if (offset_in_page(args->user_ptr | args->user_size) || + (uintptr_t)args->user_ptr != args->user_ptr || + (u32)args->user_size != args->user_size || + args->user_ptr & ~PAGE_MASK) + return -EINVAL; + + if (args->flags & ETNA_USERPTR_WRITE) + access = VERIFY_WRITE; + else + access = VERIFY_READ; + + if (!access_ok(access, (void __user *)(unsigned long)args->user_ptr, + args->user_size)) + return -EFAULT; + + return etnaviv_gem_new_userptr(dev, file, args->user_ptr, + args->user_size, args->flags, + &args->handle); +} + +static int etnaviv_ioctl_gem_wait(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct etnaviv_drm_private *priv = dev->dev_private; + struct drm_etnaviv_gem_wait *args = data; + struct timespec *timeout = &TS(args->timeout); + struct drm_gem_object *obj; + struct etnaviv_gpu *gpu; + int ret; + + if (args->flags & ~(ETNA_WAIT_NONBLOCK)) + return -EINVAL; + + if (args->pipe >= ETNA_MAX_PIPES) + return -EINVAL; + + gpu = priv->gpu[args->pipe]; + if (!gpu) + return -ENXIO; + + obj = drm_gem_object_lookup(dev, file, args->handle); + if (!obj) + return -ENOENT; + + if (args->flags & ETNA_WAIT_NONBLOCK) + timeout = NULL; + + ret = etnaviv_gem_wait_bo(gpu, obj, timeout); + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +static const struct drm_ioctl_desc etnaviv_ioctls[] = { +#define ETNA_IOCTL(n, func, flags) \ + DRM_IOCTL_DEF_DRV(ETNAVIV_##n, etnaviv_ioctl_##func, flags) + ETNA_IOCTL(GET_PARAM, get_param, DRM_AUTH|DRM_RENDER_ALLOW), + ETNA_IOCTL(GEM_NEW, gem_new, DRM_AUTH|DRM_RENDER_ALLOW), + ETNA_IOCTL(GEM_INFO, gem_info, DRM_AUTH|DRM_RENDER_ALLOW), + ETNA_IOCTL(GEM_CPU_PREP, gem_cpu_prep, DRM_AUTH|DRM_RENDER_ALLOW), + ETNA_IOCTL(GEM_CPU_FINI, gem_cpu_fini, DRM_AUTH|DRM_RENDER_ALLOW), + ETNA_IOCTL(GEM_SUBMIT, gem_submit, DRM_AUTH|DRM_RENDER_ALLOW), + ETNA_IOCTL(WAIT_FENCE, wait_fence, DRM_AUTH|DRM_RENDER_ALLOW), + ETNA_IOCTL(GEM_USERPTR, gem_userptr, DRM_AUTH|DRM_RENDER_ALLOW), + ETNA_IOCTL(GEM_WAIT, gem_wait, DRM_AUTH|DRM_RENDER_ALLOW), +}; + +static const struct vm_operations_struct vm_ops = { + .fault = etnaviv_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, +}; + +static const struct file_operations fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif + .poll = drm_poll, + .read = drm_read, + .llseek = no_llseek, + .mmap = etnaviv_gem_mmap, +}; + +static struct drm_driver etnaviv_drm_driver = { + .driver_features = DRIVER_HAVE_IRQ | + DRIVER_GEM | + DRIVER_PRIME | + DRIVER_RENDER, + .open = etnaviv_open, + .preclose = etnaviv_preclose, + .set_busid = drm_platform_set_busid, + .gem_free_object = etnaviv_gem_free_object, + .gem_vm_ops = &vm_ops, + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_export = drm_gem_prime_export, + .gem_prime_import = drm_gem_prime_import, + .gem_prime_pin = etnaviv_gem_prime_pin, + .gem_prime_unpin = etnaviv_gem_prime_unpin, + .gem_prime_get_sg_table = etnaviv_gem_prime_get_sg_table, + .gem_prime_import_sg_table = etnaviv_gem_prime_import_sg_table, + .gem_prime_vmap = etnaviv_gem_prime_vmap, + .gem_prime_vunmap = etnaviv_gem_prime_vunmap, +#ifdef CONFIG_DEBUG_FS + .debugfs_init = etnaviv_debugfs_init, + .debugfs_cleanup = etnaviv_debugfs_cleanup, +#endif + .ioctls = etnaviv_ioctls, + .num_ioctls = DRM_ETNAVIV_NUM_IOCTLS, + .fops = &fops, + .name = "etnaviv", + .desc = "etnaviv DRM", + .date = "20151214", + .major = 1, + .minor = 0, +}; + +/* + * Platform driver: + */ +static int etnaviv_bind(struct device *dev) +{ + struct etnaviv_drm_private *priv; + struct drm_device *drm; + int ret; + + drm = drm_dev_alloc(&etnaviv_drm_driver, dev); + if (!drm) + return -ENOMEM; + + drm->platformdev = to_platform_device(dev); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "failed to allocate private data\n"); + ret = -ENOMEM; + goto out_unref; + } + drm->dev_private = priv; + + priv->wq = alloc_ordered_workqueue("etnaviv", 0); + if (!priv->wq) { + ret = -ENOMEM; + goto out_wq; + } + + mutex_init(&priv->gem_lock); + INIT_LIST_HEAD(&priv->gem_list); + priv->num_gpus = 0; + + dev_set_drvdata(dev, drm); + + ret = component_bind_all(dev, drm); + if (ret < 0) + goto out_bind; + + load_gpu(drm); + + ret = drm_dev_register(drm, 0); + if (ret) + goto out_register; + + return 0; + +out_register: + component_unbind_all(dev, drm); +out_bind: + flush_workqueue(priv->wq); + destroy_workqueue(priv->wq); +out_wq: + kfree(priv); +out_unref: + drm_dev_unref(drm); + + return ret; +} + +static void etnaviv_unbind(struct device *dev) +{ + struct drm_device *drm = dev_get_drvdata(dev); + struct etnaviv_drm_private *priv = drm->dev_private; + + drm_dev_unregister(drm); + + flush_workqueue(priv->wq); + destroy_workqueue(priv->wq); + + component_unbind_all(dev, drm); + + drm->dev_private = NULL; + kfree(priv); + + drm_put_dev(drm); +} + +static const struct component_master_ops etnaviv_master_ops = { + .bind = etnaviv_bind, + .unbind = etnaviv_unbind, +}; + +static int compare_of(struct device *dev, void *data) +{ + struct device_node *np = data; + + return dev->of_node == np; +} + +static int compare_str(struct device *dev, void *data) +{ + return !strcmp(dev_name(dev), data); +} + +static int etnaviv_pdev_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct component_match *match = NULL; + + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + + if (node) { + struct device_node *core_node; + int i; + + for (i = 0; ; i++) { + core_node = of_parse_phandle(node, "cores", i); + if (!core_node) + break; + + component_match_add(&pdev->dev, &match, compare_of, + core_node); + of_node_put(core_node); + } + } else if (dev->platform_data) { + char **names = dev->platform_data; + unsigned i; + + for (i = 0; names[i]; i++) + component_match_add(dev, &match, compare_str, names[i]); + } + + return component_master_add_with_match(dev, &etnaviv_master_ops, match); +} + +static int etnaviv_pdev_remove(struct platform_device *pdev) +{ + component_master_del(&pdev->dev, &etnaviv_master_ops); + + return 0; +} + +static const struct of_device_id dt_match[] = { + { .compatible = "fsl,imx-gpu-subsystem" }, + { .compatible = "marvell,dove-gpu-subsystem" }, + {} +}; +MODULE_DEVICE_TABLE(of, dt_match); + +static struct platform_driver etnaviv_platform_driver = { + .probe = etnaviv_pdev_probe, + .remove = etnaviv_pdev_remove, + .driver = { + .name = "etnaviv", + .of_match_table = dt_match, + }, +}; + +static int __init etnaviv_init(void) +{ + int ret; + + etnaviv_validate_init(); + + ret = platform_driver_register(&etnaviv_gpu_driver); + if (ret != 0) + return ret; + + ret = platform_driver_register(&etnaviv_platform_driver); + if (ret != 0) + platform_driver_unregister(&etnaviv_gpu_driver); + + return ret; +} +module_init(etnaviv_init); + +static void __exit etnaviv_exit(void) +{ + platform_driver_unregister(&etnaviv_gpu_driver); + platform_driver_unregister(&etnaviv_platform_driver); +} +module_exit(etnaviv_exit); + +MODULE_AUTHOR("Christian Gmeiner "); +MODULE_AUTHOR("Russell King "); +MODULE_AUTHOR("Lucas Stach "); +MODULE_DESCRIPTION("etnaviv DRM Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:etnaviv"); diff --git b/drivers/gpu/drm/etnaviv/etnaviv_drv.h b/drivers/gpu/drm/etnaviv/etnaviv_drv.h new file mode 100644 index 0000000..1cd6046 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.h @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ETNAVIV_DRV_H__ +#define __ETNAVIV_DRV_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +struct etnaviv_cmdbuf; +struct etnaviv_gpu; +struct etnaviv_mmu; +struct etnaviv_gem_object; +struct etnaviv_gem_submit; + +struct etnaviv_file_private { + /* currently we don't do anything useful with this.. but when + * per-context address spaces are supported we'd keep track of + * the context's page-tables here. + */ + int dummy; +}; + +struct etnaviv_drm_private { + int num_gpus; + struct etnaviv_gpu *gpu[ETNA_MAX_PIPES]; + + /* list of GEM objects: */ + struct mutex gem_lock; + struct list_head gem_list; + + struct workqueue_struct *wq; +}; + +static inline void etnaviv_queue_work(struct drm_device *dev, + struct work_struct *w) +{ + struct etnaviv_drm_private *priv = dev->dev_private; + + queue_work(priv->wq, w); +} + +int etnaviv_ioctl_gem_submit(struct drm_device *dev, void *data, + struct drm_file *file); + +int etnaviv_gem_mmap(struct file *filp, struct vm_area_struct *vma); +int etnaviv_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); +int etnaviv_gem_mmap_offset(struct drm_gem_object *obj, u64 *offset); +int etnaviv_gem_get_iova(struct etnaviv_gpu *gpu, + struct drm_gem_object *obj, u32 *iova); +void etnaviv_gem_put_iova(struct etnaviv_gpu *gpu, struct drm_gem_object *obj); +struct sg_table *etnaviv_gem_prime_get_sg_table(struct drm_gem_object *obj); +void *etnaviv_gem_prime_vmap(struct drm_gem_object *obj); +void etnaviv_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr); +struct drm_gem_object *etnaviv_gem_prime_import_sg_table(struct drm_device *dev, + struct dma_buf_attachment *attach, struct sg_table *sg); +int etnaviv_gem_prime_pin(struct drm_gem_object *obj); +void etnaviv_gem_prime_unpin(struct drm_gem_object *obj); +void *etnaviv_gem_vmap(struct drm_gem_object *obj); +int etnaviv_gem_cpu_prep(struct drm_gem_object *obj, u32 op, + struct timespec *timeout); +int etnaviv_gem_cpu_fini(struct drm_gem_object *obj); +void etnaviv_gem_free_object(struct drm_gem_object *obj); +int etnaviv_gem_new_handle(struct drm_device *dev, struct drm_file *file, + u32 size, u32 flags, u32 *handle); +struct drm_gem_object *etnaviv_gem_new_locked(struct drm_device *dev, + u32 size, u32 flags); +struct drm_gem_object *etnaviv_gem_new(struct drm_device *dev, + u32 size, u32 flags); +int etnaviv_gem_new_userptr(struct drm_device *dev, struct drm_file *file, + uintptr_t ptr, u32 size, u32 flags, u32 *handle); +u16 etnaviv_buffer_init(struct etnaviv_gpu *gpu); +void etnaviv_buffer_end(struct etnaviv_gpu *gpu); +void etnaviv_buffer_queue(struct etnaviv_gpu *gpu, unsigned int event, + struct etnaviv_cmdbuf *cmdbuf); +void etnaviv_validate_init(void); +bool etnaviv_cmd_validate_one(struct etnaviv_gpu *gpu, + u32 *stream, unsigned int size, + struct drm_etnaviv_gem_submit_reloc *relocs, unsigned int reloc_size); + +#ifdef CONFIG_DEBUG_FS +void etnaviv_gem_describe_objects(struct etnaviv_drm_private *priv, + struct seq_file *m); +#endif + +void __iomem *etnaviv_ioremap(struct platform_device *pdev, const char *name, + const char *dbgname); +void etnaviv_writel(u32 data, void __iomem *addr); +u32 etnaviv_readl(const void __iomem *addr); + +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) +#define VERB(fmt, ...) if (0) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) + +/* + * Return the storage size of a structure with a variable length array. + * The array is nelem elements of elem_size, where the base structure + * is defined by base. If the size overflows size_t, return zero. + */ +static inline size_t size_vstruct(size_t nelem, size_t elem_size, size_t base) +{ + if (elem_size && nelem > (SIZE_MAX - base) / elem_size) + return 0; + return base + nelem * elem_size; +} + +/* returns true if fence a comes after fence b */ +static inline bool fence_after(u32 a, u32 b) +{ + return (s32)(a - b) > 0; +} + +static inline bool fence_after_eq(u32 a, u32 b) +{ + return (s32)(a - b) >= 0; +} + +static inline unsigned long etnaviv_timeout_to_jiffies( + const struct timespec *timeout) +{ + unsigned long timeout_jiffies = timespec_to_jiffies(timeout); + unsigned long start_jiffies = jiffies; + unsigned long remaining_jiffies; + + if (time_after(start_jiffies, timeout_jiffies)) + remaining_jiffies = 0; + else + remaining_jiffies = timeout_jiffies - start_jiffies; + + return remaining_jiffies; +} + +#endif /* __ETNAVIV_DRV_H__ */ diff --git b/drivers/gpu/drm/etnaviv/etnaviv_dump.c b/drivers/gpu/drm/etnaviv/etnaviv_dump.c new file mode 100644 index 0000000..4a29eea --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_dump.c @@ -0,0 +1,229 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include "etnaviv_dump.h" +#include "etnaviv_gem.h" +#include "etnaviv_gpu.h" +#include "etnaviv_mmu.h" +#include "state.xml.h" +#include "state_hi.xml.h" + +struct core_dump_iterator { + void *start; + struct etnaviv_dump_object_header *hdr; + void *data; +}; + +static const unsigned short etnaviv_dump_registers[] = { + VIVS_HI_AXI_STATUS, + VIVS_HI_CLOCK_CONTROL, + VIVS_HI_IDLE_STATE, + VIVS_HI_AXI_CONFIG, + VIVS_HI_INTR_ENBL, + VIVS_HI_CHIP_IDENTITY, + VIVS_HI_CHIP_FEATURE, + VIVS_HI_CHIP_MODEL, + VIVS_HI_CHIP_REV, + VIVS_HI_CHIP_DATE, + VIVS_HI_CHIP_TIME, + VIVS_HI_CHIP_MINOR_FEATURE_0, + VIVS_HI_CACHE_CONTROL, + VIVS_HI_AXI_CONTROL, + VIVS_PM_POWER_CONTROLS, + VIVS_PM_MODULE_CONTROLS, + VIVS_PM_MODULE_STATUS, + VIVS_PM_PULSE_EATER, + VIVS_MC_MMU_FE_PAGE_TABLE, + VIVS_MC_MMU_TX_PAGE_TABLE, + VIVS_MC_MMU_PE_PAGE_TABLE, + VIVS_MC_MMU_PEZ_PAGE_TABLE, + VIVS_MC_MMU_RA_PAGE_TABLE, + VIVS_MC_DEBUG_MEMORY, + VIVS_MC_MEMORY_BASE_ADDR_RA, + VIVS_MC_MEMORY_BASE_ADDR_FE, + VIVS_MC_MEMORY_BASE_ADDR_TX, + VIVS_MC_MEMORY_BASE_ADDR_PEZ, + VIVS_MC_MEMORY_BASE_ADDR_PE, + VIVS_MC_MEMORY_TIMING_CONTROL, + VIVS_MC_BUS_CONFIG, + VIVS_FE_DMA_STATUS, + VIVS_FE_DMA_DEBUG_STATE, + VIVS_FE_DMA_ADDRESS, + VIVS_FE_DMA_LOW, + VIVS_FE_DMA_HIGH, + VIVS_FE_AUTO_FLUSH, +}; + +static void etnaviv_core_dump_header(struct core_dump_iterator *iter, + u32 type, void *data_end) +{ + struct etnaviv_dump_object_header *hdr = iter->hdr; + + hdr->magic = cpu_to_le32(ETDUMP_MAGIC); + hdr->type = cpu_to_le32(type); + hdr->file_offset = cpu_to_le32(iter->data - iter->start); + hdr->file_size = cpu_to_le32(data_end - iter->data); + + iter->hdr++; + iter->data += hdr->file_size; +} + +static void etnaviv_core_dump_registers(struct core_dump_iterator *iter, + struct etnaviv_gpu *gpu) +{ + struct etnaviv_dump_registers *reg = iter->data; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(etnaviv_dump_registers); i++, reg++) { + reg->reg = etnaviv_dump_registers[i]; + reg->value = gpu_read(gpu, etnaviv_dump_registers[i]); + } + + etnaviv_core_dump_header(iter, ETDUMP_BUF_REG, reg); +} + +static void etnaviv_core_dump_mmu(struct core_dump_iterator *iter, + struct etnaviv_gpu *gpu, size_t mmu_size) +{ + etnaviv_iommu_dump(gpu->mmu, iter->data); + + etnaviv_core_dump_header(iter, ETDUMP_BUF_MMU, iter->data + mmu_size); +} + +static void etnaviv_core_dump_mem(struct core_dump_iterator *iter, u32 type, + void *ptr, size_t size, u64 iova) +{ + memcpy(iter->data, ptr, size); + + iter->hdr->iova = cpu_to_le64(iova); + + etnaviv_core_dump_header(iter, type, iter->data + size); +} + +void etnaviv_core_dump(struct etnaviv_gpu *gpu) +{ + struct core_dump_iterator iter; + struct etnaviv_vram_mapping *vram; + struct etnaviv_gem_object *obj; + struct etnaviv_cmdbuf *cmd; + unsigned int n_obj, n_bomap_pages; + size_t file_size, mmu_size; + __le64 *bomap, *bomap_start; + + mmu_size = etnaviv_iommu_dump_size(gpu->mmu); + + /* We always dump registers, mmu, ring and end marker */ + n_obj = 4; + n_bomap_pages = 0; + file_size = ARRAY_SIZE(etnaviv_dump_registers) * + sizeof(struct etnaviv_dump_registers) + + mmu_size + gpu->buffer->size; + + /* Add in the active command buffers */ + list_for_each_entry(cmd, &gpu->active_cmd_list, node) { + file_size += cmd->size; + n_obj++; + } + + /* Add in the active buffer objects */ + list_for_each_entry(vram, &gpu->mmu->mappings, mmu_node) { + if (!vram->use) + continue; + + obj = vram->object; + file_size += obj->base.size; + n_bomap_pages += obj->base.size >> PAGE_SHIFT; + n_obj++; + } + + /* If we have any buffer objects, add a bomap object */ + if (n_bomap_pages) { + file_size += n_bomap_pages * sizeof(__le64); + n_obj++; + } + + /* Add the size of the headers */ + file_size += sizeof(*iter.hdr) * n_obj; + + /* Allocate the file in vmalloc memory, it's likely to be big */ + iter.start = vmalloc(file_size); + if (!iter.start) { + dev_warn(gpu->dev, "failed to allocate devcoredump file\n"); + return; + } + + /* Point the data member after the headers */ + iter.hdr = iter.start; + iter.data = &iter.hdr[n_obj]; + + memset(iter.hdr, 0, iter.data - iter.start); + + etnaviv_core_dump_registers(&iter, gpu); + etnaviv_core_dump_mmu(&iter, gpu, mmu_size); + etnaviv_core_dump_mem(&iter, ETDUMP_BUF_RING, gpu->buffer->vaddr, + gpu->buffer->size, gpu->buffer->paddr); + + list_for_each_entry(cmd, &gpu->active_cmd_list, node) + etnaviv_core_dump_mem(&iter, ETDUMP_BUF_CMD, cmd->vaddr, + cmd->size, cmd->paddr); + + /* Reserve space for the bomap */ + if (n_bomap_pages) { + bomap_start = bomap = iter.data; + memset(bomap, 0, sizeof(*bomap) * n_bomap_pages); + etnaviv_core_dump_header(&iter, ETDUMP_BUF_BOMAP, + bomap + n_bomap_pages); + } else { + /* Silence warning */ + bomap_start = bomap = NULL; + } + + list_for_each_entry(vram, &gpu->mmu->mappings, mmu_node) { + struct page **pages; + void *vaddr; + + if (vram->use == 0) + continue; + + obj = vram->object; + + mutex_lock(&obj->lock); + pages = etnaviv_gem_get_pages(obj); + mutex_unlock(&obj->lock); + if (pages) { + int j; + + iter.hdr->data[0] = bomap - bomap_start; + + for (j = 0; j < obj->base.size >> PAGE_SHIFT; j++) + *bomap++ = cpu_to_le64(page_to_phys(*pages++)); + } + + iter.hdr->iova = cpu_to_le64(vram->iova); + + vaddr = etnaviv_gem_vmap(&obj->base); + if (vaddr) + memcpy(iter.data, vaddr, obj->base.size); + + etnaviv_core_dump_header(&iter, ETDUMP_BUF_BO, iter.data + + obj->base.size); + } + + etnaviv_core_dump_header(&iter, ETDUMP_BUF_END, iter.data); + + dev_coredumpv(gpu->dev, iter.start, iter.data - iter.start, GFP_KERNEL); +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_dump.h b/drivers/gpu/drm/etnaviv/etnaviv_dump.h new file mode 100644 index 0000000..97f2f8d --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_dump.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + * + * Etnaviv devcoredump file definitions + */ +#ifndef ETNAVIV_DUMP_H +#define ETNAVIV_DUMP_H + +#include + +enum { + ETDUMP_MAGIC = 0x414e5445, + ETDUMP_BUF_REG = 0, + ETDUMP_BUF_MMU, + ETDUMP_BUF_RING, + ETDUMP_BUF_CMD, + ETDUMP_BUF_BOMAP, + ETDUMP_BUF_BO, + ETDUMP_BUF_END, +}; + +struct etnaviv_dump_object_header { + __le32 magic; + __le32 type; + __le32 file_offset; + __le32 file_size; + __le64 iova; + __le32 data[2]; +}; + +/* Registers object, an array of these */ +struct etnaviv_dump_registers { + __le32 reg; + __le32 value; +}; + +#ifdef __KERNEL__ +struct etnaviv_gpu; +void etnaviv_core_dump(struct etnaviv_gpu *gpu); +#endif + +#endif diff --git b/drivers/gpu/drm/etnaviv/etnaviv_gem.c b/drivers/gpu/drm/etnaviv/etnaviv_gem.c new file mode 100644 index 0000000..4b519e4 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.c @@ -0,0 +1,915 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include + +#include "etnaviv_drv.h" +#include "etnaviv_gem.h" +#include "etnaviv_gpu.h" +#include "etnaviv_mmu.h" + +static void etnaviv_gem_scatter_map(struct etnaviv_gem_object *etnaviv_obj) +{ + struct drm_device *dev = etnaviv_obj->base.dev; + struct sg_table *sgt = etnaviv_obj->sgt; + + /* + * For non-cached buffers, ensure the new pages are clean + * because display controller, GPU, etc. are not coherent. + */ + if (etnaviv_obj->flags & ETNA_BO_CACHE_MASK) + dma_map_sg(dev->dev, sgt->sgl, sgt->nents, DMA_BIDIRECTIONAL); +} + +static void etnaviv_gem_scatterlist_unmap(struct etnaviv_gem_object *etnaviv_obj) +{ + struct drm_device *dev = etnaviv_obj->base.dev; + struct sg_table *sgt = etnaviv_obj->sgt; + + /* + * For non-cached buffers, ensure the new pages are clean + * because display controller, GPU, etc. are not coherent: + * + * WARNING: The DMA API does not support concurrent CPU + * and device access to the memory area. With BIDIRECTIONAL, + * we will clean the cache lines which overlap the region, + * and invalidate all cache lines (partially) contained in + * the region. + * + * If you have dirty data in the overlapping cache lines, + * that will corrupt the GPU-written data. If you have + * written into the remainder of the region, this can + * discard those writes. + */ + if (etnaviv_obj->flags & ETNA_BO_CACHE_MASK) + dma_unmap_sg(dev->dev, sgt->sgl, sgt->nents, DMA_BIDIRECTIONAL); +} + +/* called with etnaviv_obj->lock held */ +static int etnaviv_gem_shmem_get_pages(struct etnaviv_gem_object *etnaviv_obj) +{ + struct drm_device *dev = etnaviv_obj->base.dev; + struct page **p = drm_gem_get_pages(&etnaviv_obj->base); + + if (IS_ERR(p)) { + dev_err(dev->dev, "could not get pages: %ld\n", PTR_ERR(p)); + return PTR_ERR(p); + } + + etnaviv_obj->pages = p; + + return 0; +} + +static void put_pages(struct etnaviv_gem_object *etnaviv_obj) +{ + if (etnaviv_obj->sgt) { + etnaviv_gem_scatterlist_unmap(etnaviv_obj); + sg_free_table(etnaviv_obj->sgt); + kfree(etnaviv_obj->sgt); + etnaviv_obj->sgt = NULL; + } + if (etnaviv_obj->pages) { + drm_gem_put_pages(&etnaviv_obj->base, etnaviv_obj->pages, + true, false); + + etnaviv_obj->pages = NULL; + } +} + +struct page **etnaviv_gem_get_pages(struct etnaviv_gem_object *etnaviv_obj) +{ + int ret; + + lockdep_assert_held(&etnaviv_obj->lock); + + if (!etnaviv_obj->pages) { + ret = etnaviv_obj->ops->get_pages(etnaviv_obj); + if (ret < 0) + return ERR_PTR(ret); + } + + if (!etnaviv_obj->sgt) { + struct drm_device *dev = etnaviv_obj->base.dev; + int npages = etnaviv_obj->base.size >> PAGE_SHIFT; + struct sg_table *sgt; + + sgt = drm_prime_pages_to_sg(etnaviv_obj->pages, npages); + if (IS_ERR(sgt)) { + dev_err(dev->dev, "failed to allocate sgt: %ld\n", + PTR_ERR(sgt)); + return ERR_CAST(sgt); + } + + etnaviv_obj->sgt = sgt; + + etnaviv_gem_scatter_map(etnaviv_obj); + } + + return etnaviv_obj->pages; +} + +void etnaviv_gem_put_pages(struct etnaviv_gem_object *etnaviv_obj) +{ + lockdep_assert_held(&etnaviv_obj->lock); + /* when we start tracking the pin count, then do something here */ +} + +static int etnaviv_gem_mmap_obj(struct drm_gem_object *obj, + struct vm_area_struct *vma) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + pgprot_t vm_page_prot; + + vma->vm_flags &= ~VM_PFNMAP; + vma->vm_flags |= VM_MIXEDMAP; + + vm_page_prot = vm_get_page_prot(vma->vm_flags); + + if (etnaviv_obj->flags & ETNA_BO_WC) { + vma->vm_page_prot = pgprot_writecombine(vm_page_prot); + } else if (etnaviv_obj->flags & ETNA_BO_UNCACHED) { + vma->vm_page_prot = pgprot_noncached(vm_page_prot); + } else { + /* + * Shunt off cached objs to shmem file so they have their own + * address_space (so unmap_mapping_range does what we want, + * in particular in the case of mmap'd dmabufs) + */ + fput(vma->vm_file); + get_file(obj->filp); + vma->vm_pgoff = 0; + vma->vm_file = obj->filp; + + vma->vm_page_prot = vm_page_prot; + } + + return 0; +} + +int etnaviv_gem_mmap(struct file *filp, struct vm_area_struct *vma) +{ + struct etnaviv_gem_object *obj; + int ret; + + ret = drm_gem_mmap(filp, vma); + if (ret) { + DBG("mmap failed: %d", ret); + return ret; + } + + obj = to_etnaviv_bo(vma->vm_private_data); + return etnaviv_gem_mmap_obj(vma->vm_private_data, vma); +} + +int etnaviv_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct drm_gem_object *obj = vma->vm_private_data; + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + struct page **pages, *page; + pgoff_t pgoff; + int ret; + + /* + * Make sure we don't parallel update on a fault, nor move or remove + * something from beneath our feet. Note that vm_insert_page() is + * specifically coded to take care of this, so we don't have to. + */ + ret = mutex_lock_interruptible(&etnaviv_obj->lock); + if (ret) + goto out; + + /* make sure we have pages attached now */ + pages = etnaviv_gem_get_pages(etnaviv_obj); + mutex_unlock(&etnaviv_obj->lock); + + if (IS_ERR(pages)) { + ret = PTR_ERR(pages); + goto out; + } + + /* We don't use vmf->pgoff since that has the fake offset: */ + pgoff = ((unsigned long)vmf->virtual_address - + vma->vm_start) >> PAGE_SHIFT; + + page = pages[pgoff]; + + VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address, + page_to_pfn(page), page_to_pfn(page) << PAGE_SHIFT); + + ret = vm_insert_page(vma, (unsigned long)vmf->virtual_address, page); + +out: + switch (ret) { + case -EAGAIN: + case 0: + case -ERESTARTSYS: + case -EINTR: + case -EBUSY: + /* + * EBUSY is ok: this just means that another thread + * already did the job. + */ + return VM_FAULT_NOPAGE; + case -ENOMEM: + return VM_FAULT_OOM; + default: + return VM_FAULT_SIGBUS; + } +} + +int etnaviv_gem_mmap_offset(struct drm_gem_object *obj, u64 *offset) +{ + int ret; + + /* Make it mmapable */ + ret = drm_gem_create_mmap_offset(obj); + if (ret) + dev_err(obj->dev->dev, "could not allocate mmap offset\n"); + else + *offset = drm_vma_node_offset_addr(&obj->vma_node); + + return ret; +} + +static struct etnaviv_vram_mapping * +etnaviv_gem_get_vram_mapping(struct etnaviv_gem_object *obj, + struct etnaviv_iommu *mmu) +{ + struct etnaviv_vram_mapping *mapping; + + list_for_each_entry(mapping, &obj->vram_list, obj_node) { + if (mapping->mmu == mmu) + return mapping; + } + + return NULL; +} + +int etnaviv_gem_get_iova(struct etnaviv_gpu *gpu, + struct drm_gem_object *obj, u32 *iova) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + struct etnaviv_vram_mapping *mapping; + struct page **pages; + int ret = 0; + + mutex_lock(&etnaviv_obj->lock); + mapping = etnaviv_gem_get_vram_mapping(etnaviv_obj, gpu->mmu); + if (mapping) { + /* + * Holding the object lock prevents the use count changing + * beneath us. If the use count is zero, the MMU might be + * reaping this object, so take the lock and re-check that + * the MMU owns this mapping to close this race. + */ + if (mapping->use == 0) { + mutex_lock(&gpu->mmu->lock); + if (mapping->mmu == gpu->mmu) + mapping->use += 1; + else + mapping = NULL; + mutex_unlock(&gpu->mmu->lock); + if (mapping) + goto out; + } else { + mapping->use += 1; + goto out; + } + } + + pages = etnaviv_gem_get_pages(etnaviv_obj); + if (IS_ERR(pages)) { + ret = PTR_ERR(pages); + goto out; + } + + /* + * See if we have a reaped vram mapping we can re-use before + * allocating a fresh mapping. + */ + mapping = etnaviv_gem_get_vram_mapping(etnaviv_obj, NULL); + if (!mapping) { + mapping = kzalloc(sizeof(*mapping), GFP_KERNEL); + if (!mapping) { + ret = -ENOMEM; + goto out; + } + + INIT_LIST_HEAD(&mapping->scan_node); + mapping->object = etnaviv_obj; + } else { + list_del(&mapping->obj_node); + } + + mapping->mmu = gpu->mmu; + mapping->use = 1; + + ret = etnaviv_iommu_map_gem(gpu->mmu, etnaviv_obj, gpu->memory_base, + mapping); + if (ret < 0) + kfree(mapping); + else + list_add_tail(&mapping->obj_node, &etnaviv_obj->vram_list); + +out: + mutex_unlock(&etnaviv_obj->lock); + + if (!ret) { + /* Take a reference on the object */ + drm_gem_object_reference(obj); + *iova = mapping->iova; + } + + return ret; +} + +void etnaviv_gem_put_iova(struct etnaviv_gpu *gpu, struct drm_gem_object *obj) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + struct etnaviv_vram_mapping *mapping; + + mutex_lock(&etnaviv_obj->lock); + mapping = etnaviv_gem_get_vram_mapping(etnaviv_obj, gpu->mmu); + + WARN_ON(mapping->use == 0); + mapping->use -= 1; + mutex_unlock(&etnaviv_obj->lock); + + drm_gem_object_unreference_unlocked(obj); +} + +void *etnaviv_gem_vmap(struct drm_gem_object *obj) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + + if (etnaviv_obj->vaddr) + return etnaviv_obj->vaddr; + + mutex_lock(&etnaviv_obj->lock); + /* + * Need to check again, as we might have raced with another thread + * while waiting for the mutex. + */ + if (!etnaviv_obj->vaddr) + etnaviv_obj->vaddr = etnaviv_obj->ops->vmap(etnaviv_obj); + mutex_unlock(&etnaviv_obj->lock); + + return etnaviv_obj->vaddr; +} + +static void *etnaviv_gem_vmap_impl(struct etnaviv_gem_object *obj) +{ + struct page **pages; + + lockdep_assert_held(&obj->lock); + + pages = etnaviv_gem_get_pages(obj); + if (IS_ERR(pages)) + return NULL; + + return vmap(pages, obj->base.size >> PAGE_SHIFT, + VM_MAP, pgprot_writecombine(PAGE_KERNEL)); +} + +static inline enum dma_data_direction etnaviv_op_to_dma_dir(u32 op) +{ + if (op & ETNA_PREP_READ) + return DMA_FROM_DEVICE; + else if (op & ETNA_PREP_WRITE) + return DMA_TO_DEVICE; + else + return DMA_BIDIRECTIONAL; +} + +int etnaviv_gem_cpu_prep(struct drm_gem_object *obj, u32 op, + struct timespec *timeout) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + struct drm_device *dev = obj->dev; + bool write = !!(op & ETNA_PREP_WRITE); + int ret; + + if (op & ETNA_PREP_NOSYNC) { + if (!reservation_object_test_signaled_rcu(etnaviv_obj->resv, + write)) + return -EBUSY; + } else { + unsigned long remain = etnaviv_timeout_to_jiffies(timeout); + + ret = reservation_object_wait_timeout_rcu(etnaviv_obj->resv, + write, true, remain); + if (ret <= 0) + return ret == 0 ? -ETIMEDOUT : ret; + } + + if (etnaviv_obj->flags & ETNA_BO_CACHED) { + if (!etnaviv_obj->sgt) { + void *ret; + + mutex_lock(&etnaviv_obj->lock); + ret = etnaviv_gem_get_pages(etnaviv_obj); + mutex_unlock(&etnaviv_obj->lock); + if (IS_ERR(ret)) + return PTR_ERR(ret); + } + + dma_sync_sg_for_cpu(dev->dev, etnaviv_obj->sgt->sgl, + etnaviv_obj->sgt->nents, + etnaviv_op_to_dma_dir(op)); + etnaviv_obj->last_cpu_prep_op = op; + } + + return 0; +} + +int etnaviv_gem_cpu_fini(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + + if (etnaviv_obj->flags & ETNA_BO_CACHED) { + /* fini without a prep is almost certainly a userspace error */ + WARN_ON(etnaviv_obj->last_cpu_prep_op == 0); + dma_sync_sg_for_device(dev->dev, etnaviv_obj->sgt->sgl, + etnaviv_obj->sgt->nents, + etnaviv_op_to_dma_dir(etnaviv_obj->last_cpu_prep_op)); + etnaviv_obj->last_cpu_prep_op = 0; + } + + return 0; +} + +int etnaviv_gem_wait_bo(struct etnaviv_gpu *gpu, struct drm_gem_object *obj, + struct timespec *timeout) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + + return etnaviv_gpu_wait_obj_inactive(gpu, etnaviv_obj, timeout); +} + +#ifdef CONFIG_DEBUG_FS +static void etnaviv_gem_describe_fence(struct fence *fence, + const char *type, struct seq_file *m) +{ + if (!test_bit(FENCE_FLAG_SIGNALED_BIT, &fence->flags)) + seq_printf(m, "\t%9s: %s %s seq %u\n", + type, + fence->ops->get_driver_name(fence), + fence->ops->get_timeline_name(fence), + fence->seqno); +} + +static void etnaviv_gem_describe(struct drm_gem_object *obj, struct seq_file *m) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + struct reservation_object *robj = etnaviv_obj->resv; + struct reservation_object_list *fobj; + struct fence *fence; + unsigned long off = drm_vma_node_start(&obj->vma_node); + + seq_printf(m, "%08x: %c %2d (%2d) %08lx %p %zd\n", + etnaviv_obj->flags, is_active(etnaviv_obj) ? 'A' : 'I', + obj->name, obj->refcount.refcount.counter, + off, etnaviv_obj->vaddr, obj->size); + + rcu_read_lock(); + fobj = rcu_dereference(robj->fence); + if (fobj) { + unsigned int i, shared_count = fobj->shared_count; + + for (i = 0; i < shared_count; i++) { + fence = rcu_dereference(fobj->shared[i]); + etnaviv_gem_describe_fence(fence, "Shared", m); + } + } + + fence = rcu_dereference(robj->fence_excl); + if (fence) + etnaviv_gem_describe_fence(fence, "Exclusive", m); + rcu_read_unlock(); +} + +void etnaviv_gem_describe_objects(struct etnaviv_drm_private *priv, + struct seq_file *m) +{ + struct etnaviv_gem_object *etnaviv_obj; + int count = 0; + size_t size = 0; + + mutex_lock(&priv->gem_lock); + list_for_each_entry(etnaviv_obj, &priv->gem_list, gem_node) { + struct drm_gem_object *obj = &etnaviv_obj->base; + + seq_puts(m, " "); + etnaviv_gem_describe(obj, m); + count++; + size += obj->size; + } + mutex_unlock(&priv->gem_lock); + + seq_printf(m, "Total %d objects, %zu bytes\n", count, size); +} +#endif + +static void etnaviv_gem_shmem_release(struct etnaviv_gem_object *etnaviv_obj) +{ + if (etnaviv_obj->vaddr) + vunmap(etnaviv_obj->vaddr); + put_pages(etnaviv_obj); +} + +static const struct etnaviv_gem_ops etnaviv_gem_shmem_ops = { + .get_pages = etnaviv_gem_shmem_get_pages, + .release = etnaviv_gem_shmem_release, + .vmap = etnaviv_gem_vmap_impl, +}; + +void etnaviv_gem_free_object(struct drm_gem_object *obj) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + struct etnaviv_vram_mapping *mapping, *tmp; + + /* object should not be active */ + WARN_ON(is_active(etnaviv_obj)); + + list_del(&etnaviv_obj->gem_node); + + list_for_each_entry_safe(mapping, tmp, &etnaviv_obj->vram_list, + obj_node) { + struct etnaviv_iommu *mmu = mapping->mmu; + + WARN_ON(mapping->use); + + if (mmu) + etnaviv_iommu_unmap_gem(mmu, mapping); + + list_del(&mapping->obj_node); + kfree(mapping); + } + + drm_gem_free_mmap_offset(obj); + etnaviv_obj->ops->release(etnaviv_obj); + if (etnaviv_obj->resv == &etnaviv_obj->_resv) + reservation_object_fini(&etnaviv_obj->_resv); + drm_gem_object_release(obj); + + kfree(etnaviv_obj); +} + +int etnaviv_gem_obj_add(struct drm_device *dev, struct drm_gem_object *obj) +{ + struct etnaviv_drm_private *priv = dev->dev_private; + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + + mutex_lock(&priv->gem_lock); + list_add_tail(&etnaviv_obj->gem_node, &priv->gem_list); + mutex_unlock(&priv->gem_lock); + + return 0; +} + +static int etnaviv_gem_new_impl(struct drm_device *dev, u32 size, u32 flags, + struct reservation_object *robj, const struct etnaviv_gem_ops *ops, + struct drm_gem_object **obj) +{ + struct etnaviv_gem_object *etnaviv_obj; + unsigned sz = sizeof(*etnaviv_obj); + bool valid = true; + + /* validate flags */ + switch (flags & ETNA_BO_CACHE_MASK) { + case ETNA_BO_UNCACHED: + case ETNA_BO_CACHED: + case ETNA_BO_WC: + break; + default: + valid = false; + } + + if (!valid) { + dev_err(dev->dev, "invalid cache flag: %x\n", + (flags & ETNA_BO_CACHE_MASK)); + return -EINVAL; + } + + etnaviv_obj = kzalloc(sz, GFP_KERNEL); + if (!etnaviv_obj) + return -ENOMEM; + + etnaviv_obj->flags = flags; + etnaviv_obj->ops = ops; + if (robj) { + etnaviv_obj->resv = robj; + } else { + etnaviv_obj->resv = &etnaviv_obj->_resv; + reservation_object_init(&etnaviv_obj->_resv); + } + + mutex_init(&etnaviv_obj->lock); + INIT_LIST_HEAD(&etnaviv_obj->vram_list); + + *obj = &etnaviv_obj->base; + + return 0; +} + +static struct drm_gem_object *__etnaviv_gem_new(struct drm_device *dev, + u32 size, u32 flags) +{ + struct drm_gem_object *obj = NULL; + int ret; + + size = PAGE_ALIGN(size); + + ret = etnaviv_gem_new_impl(dev, size, flags, NULL, + &etnaviv_gem_shmem_ops, &obj); + if (ret) + goto fail; + + ret = drm_gem_object_init(dev, obj, size); + if (ret == 0) { + struct address_space *mapping; + + /* + * Our buffers are kept pinned, so allocating them + * from the MOVABLE zone is a really bad idea, and + * conflicts with CMA. See coments above new_inode() + * why this is required _and_ expected if you're + * going to pin these pages. + */ + mapping = file_inode(obj->filp)->i_mapping; + mapping_set_gfp_mask(mapping, GFP_HIGHUSER); + } + + if (ret) + goto fail; + + return obj; + +fail: + if (obj) + drm_gem_object_unreference_unlocked(obj); + + return ERR_PTR(ret); +} + +/* convenience method to construct a GEM buffer object, and userspace handle */ +int etnaviv_gem_new_handle(struct drm_device *dev, struct drm_file *file, + u32 size, u32 flags, u32 *handle) +{ + struct drm_gem_object *obj; + int ret; + + obj = __etnaviv_gem_new(dev, size, flags); + if (IS_ERR(obj)) + return PTR_ERR(obj); + + ret = etnaviv_gem_obj_add(dev, obj); + if (ret < 0) { + drm_gem_object_unreference_unlocked(obj); + return ret; + } + + ret = drm_gem_handle_create(file, obj, handle); + + /* drop reference from allocate - handle holds it now */ + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +struct drm_gem_object *etnaviv_gem_new(struct drm_device *dev, + u32 size, u32 flags) +{ + struct drm_gem_object *obj; + int ret; + + obj = __etnaviv_gem_new(dev, size, flags); + if (IS_ERR(obj)) + return obj; + + ret = etnaviv_gem_obj_add(dev, obj); + if (ret < 0) { + drm_gem_object_unreference_unlocked(obj); + return ERR_PTR(ret); + } + + return obj; +} + +int etnaviv_gem_new_private(struct drm_device *dev, size_t size, u32 flags, + struct reservation_object *robj, const struct etnaviv_gem_ops *ops, + struct etnaviv_gem_object **res) +{ + struct drm_gem_object *obj; + int ret; + + ret = etnaviv_gem_new_impl(dev, size, flags, robj, ops, &obj); + if (ret) + return ret; + + drm_gem_private_object_init(dev, obj, size); + + *res = to_etnaviv_bo(obj); + + return 0; +} + +struct get_pages_work { + struct work_struct work; + struct mm_struct *mm; + struct task_struct *task; + struct etnaviv_gem_object *etnaviv_obj; +}; + +static struct page **etnaviv_gem_userptr_do_get_pages( + struct etnaviv_gem_object *etnaviv_obj, struct mm_struct *mm, struct task_struct *task) +{ + int ret = 0, pinned, npages = etnaviv_obj->base.size >> PAGE_SHIFT; + struct page **pvec; + uintptr_t ptr; + + pvec = drm_malloc_ab(npages, sizeof(struct page *)); + if (!pvec) + return ERR_PTR(-ENOMEM); + + pinned = 0; + ptr = etnaviv_obj->userptr.ptr; + + down_read(&mm->mmap_sem); + while (pinned < npages) { + ret = get_user_pages(task, mm, ptr, npages - pinned, + !etnaviv_obj->userptr.ro, 0, + pvec + pinned, NULL); + if (ret < 0) + break; + + ptr += ret * PAGE_SIZE; + pinned += ret; + } + up_read(&mm->mmap_sem); + + if (ret < 0) { + release_pages(pvec, pinned, 0); + drm_free_large(pvec); + return ERR_PTR(ret); + } + + return pvec; +} + +static void __etnaviv_gem_userptr_get_pages(struct work_struct *_work) +{ + struct get_pages_work *work = container_of(_work, typeof(*work), work); + struct etnaviv_gem_object *etnaviv_obj = work->etnaviv_obj; + struct page **pvec; + + pvec = etnaviv_gem_userptr_do_get_pages(etnaviv_obj, work->mm, work->task); + + mutex_lock(&etnaviv_obj->lock); + if (IS_ERR(pvec)) { + etnaviv_obj->userptr.work = ERR_CAST(pvec); + } else { + etnaviv_obj->userptr.work = NULL; + etnaviv_obj->pages = pvec; + } + + mutex_unlock(&etnaviv_obj->lock); + drm_gem_object_unreference_unlocked(&etnaviv_obj->base); + + mmput(work->mm); + put_task_struct(work->task); + kfree(work); +} + +static int etnaviv_gem_userptr_get_pages(struct etnaviv_gem_object *etnaviv_obj) +{ + struct page **pvec = NULL; + struct get_pages_work *work; + struct mm_struct *mm; + int ret, pinned, npages = etnaviv_obj->base.size >> PAGE_SHIFT; + + if (etnaviv_obj->userptr.work) { + if (IS_ERR(etnaviv_obj->userptr.work)) { + ret = PTR_ERR(etnaviv_obj->userptr.work); + etnaviv_obj->userptr.work = NULL; + } else { + ret = -EAGAIN; + } + return ret; + } + + mm = get_task_mm(etnaviv_obj->userptr.task); + pinned = 0; + if (mm == current->mm) { + pvec = drm_malloc_ab(npages, sizeof(struct page *)); + if (!pvec) { + mmput(mm); + return -ENOMEM; + } + + pinned = __get_user_pages_fast(etnaviv_obj->userptr.ptr, npages, + !etnaviv_obj->userptr.ro, pvec); + if (pinned < 0) { + drm_free_large(pvec); + mmput(mm); + return pinned; + } + + if (pinned == npages) { + etnaviv_obj->pages = pvec; + mmput(mm); + return 0; + } + } + + release_pages(pvec, pinned, 0); + drm_free_large(pvec); + + work = kmalloc(sizeof(*work), GFP_KERNEL); + if (!work) { + mmput(mm); + return -ENOMEM; + } + + get_task_struct(current); + drm_gem_object_reference(&etnaviv_obj->base); + + work->mm = mm; + work->task = current; + work->etnaviv_obj = etnaviv_obj; + + etnaviv_obj->userptr.work = &work->work; + INIT_WORK(&work->work, __etnaviv_gem_userptr_get_pages); + + etnaviv_queue_work(etnaviv_obj->base.dev, &work->work); + + return -EAGAIN; +} + +static void etnaviv_gem_userptr_release(struct etnaviv_gem_object *etnaviv_obj) +{ + if (etnaviv_obj->sgt) { + etnaviv_gem_scatterlist_unmap(etnaviv_obj); + sg_free_table(etnaviv_obj->sgt); + kfree(etnaviv_obj->sgt); + } + if (etnaviv_obj->pages) { + int npages = etnaviv_obj->base.size >> PAGE_SHIFT; + + release_pages(etnaviv_obj->pages, npages, 0); + drm_free_large(etnaviv_obj->pages); + } + put_task_struct(etnaviv_obj->userptr.task); +} + +static const struct etnaviv_gem_ops etnaviv_gem_userptr_ops = { + .get_pages = etnaviv_gem_userptr_get_pages, + .release = etnaviv_gem_userptr_release, + .vmap = etnaviv_gem_vmap_impl, +}; + +int etnaviv_gem_new_userptr(struct drm_device *dev, struct drm_file *file, + uintptr_t ptr, u32 size, u32 flags, u32 *handle) +{ + struct etnaviv_gem_object *etnaviv_obj; + int ret; + + ret = etnaviv_gem_new_private(dev, size, ETNA_BO_CACHED, NULL, + &etnaviv_gem_userptr_ops, &etnaviv_obj); + if (ret) + return ret; + + etnaviv_obj->userptr.ptr = ptr; + etnaviv_obj->userptr.task = current; + etnaviv_obj->userptr.ro = !(flags & ETNA_USERPTR_WRITE); + get_task_struct(current); + + ret = etnaviv_gem_obj_add(dev, &etnaviv_obj->base); + if (ret) { + drm_gem_object_unreference_unlocked(&etnaviv_obj->base); + return ret; + } + + ret = drm_gem_handle_create(file, &etnaviv_obj->base, handle); + + /* drop reference from allocate - handle holds it now */ + drm_gem_object_unreference_unlocked(&etnaviv_obj->base); + + return ret; +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_gem.h b/drivers/gpu/drm/etnaviv/etnaviv_gem.h new file mode 100644 index 0000000..ab5df81 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.h @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ETNAVIV_GEM_H__ +#define __ETNAVIV_GEM_H__ + +#include +#include "etnaviv_drv.h" + +struct etnaviv_gem_ops; +struct etnaviv_gem_object; + +struct etnaviv_gem_userptr { + uintptr_t ptr; + struct task_struct *task; + struct work_struct *work; + bool ro; +}; + +struct etnaviv_vram_mapping { + struct list_head obj_node; + struct list_head scan_node; + struct list_head mmu_node; + struct etnaviv_gem_object *object; + struct etnaviv_iommu *mmu; + struct drm_mm_node vram_node; + unsigned int use; + u32 iova; +}; + +struct etnaviv_gem_object { + struct drm_gem_object base; + const struct etnaviv_gem_ops *ops; + struct mutex lock; + + u32 flags; + + struct list_head gem_node; + struct etnaviv_gpu *gpu; /* non-null if active */ + atomic_t gpu_active; + u32 access; + + struct page **pages; + struct sg_table *sgt; + void *vaddr; + + /* normally (resv == &_resv) except for imported bo's */ + struct reservation_object *resv; + struct reservation_object _resv; + + struct list_head vram_list; + + /* cache maintenance */ + u32 last_cpu_prep_op; + + struct etnaviv_gem_userptr userptr; +}; + +static inline +struct etnaviv_gem_object *to_etnaviv_bo(struct drm_gem_object *obj) +{ + return container_of(obj, struct etnaviv_gem_object, base); +} + +struct etnaviv_gem_ops { + int (*get_pages)(struct etnaviv_gem_object *); + void (*release)(struct etnaviv_gem_object *); + void *(*vmap)(struct etnaviv_gem_object *); +}; + +static inline bool is_active(struct etnaviv_gem_object *etnaviv_obj) +{ + return atomic_read(&etnaviv_obj->gpu_active) != 0; +} + +#define MAX_CMDS 4 + +/* Created per submit-ioctl, to track bo's and cmdstream bufs, etc, + * associated with the cmdstream submission for synchronization (and + * make it easier to unwind when things go wrong, etc). This only + * lasts for the duration of the submit-ioctl. + */ +struct etnaviv_gem_submit { + struct drm_device *dev; + struct etnaviv_gpu *gpu; + struct ww_acquire_ctx ticket; + u32 fence; + unsigned int nr_bos; + struct { + u32 flags; + struct etnaviv_gem_object *obj; + u32 iova; + } bos[0]; +}; + +int etnaviv_gem_wait_bo(struct etnaviv_gpu *gpu, struct drm_gem_object *obj, + struct timespec *timeout); +int etnaviv_gem_new_private(struct drm_device *dev, size_t size, u32 flags, + struct reservation_object *robj, const struct etnaviv_gem_ops *ops, + struct etnaviv_gem_object **res); +int etnaviv_gem_obj_add(struct drm_device *dev, struct drm_gem_object *obj); +struct page **etnaviv_gem_get_pages(struct etnaviv_gem_object *obj); +void etnaviv_gem_put_pages(struct etnaviv_gem_object *obj); + +#endif /* __ETNAVIV_GEM_H__ */ diff --git b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c new file mode 100644 index 0000000..4e67395 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2013 Red Hat + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include "etnaviv_drv.h" +#include "etnaviv_gem.h" + + +struct sg_table *etnaviv_gem_prime_get_sg_table(struct drm_gem_object *obj) +{ + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + + BUG_ON(!etnaviv_obj->sgt); /* should have already pinned! */ + + return etnaviv_obj->sgt; +} + +void *etnaviv_gem_prime_vmap(struct drm_gem_object *obj) +{ + return etnaviv_gem_vmap(obj); +} + +void etnaviv_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr) +{ + /* TODO msm_gem_vunmap() */ +} + +int etnaviv_gem_prime_pin(struct drm_gem_object *obj) +{ + if (!obj->import_attach) { + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + + mutex_lock(&etnaviv_obj->lock); + etnaviv_gem_get_pages(etnaviv_obj); + mutex_unlock(&etnaviv_obj->lock); + } + return 0; +} + +void etnaviv_gem_prime_unpin(struct drm_gem_object *obj) +{ + if (!obj->import_attach) { + struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); + + mutex_lock(&etnaviv_obj->lock); + etnaviv_gem_put_pages(to_etnaviv_bo(obj)); + mutex_unlock(&etnaviv_obj->lock); + } +} + +static void etnaviv_gem_prime_release(struct etnaviv_gem_object *etnaviv_obj) +{ + if (etnaviv_obj->vaddr) + dma_buf_vunmap(etnaviv_obj->base.import_attach->dmabuf, + etnaviv_obj->vaddr); + + /* Don't drop the pages for imported dmabuf, as they are not + * ours, just free the array we allocated: + */ + if (etnaviv_obj->pages) + drm_free_large(etnaviv_obj->pages); + + drm_prime_gem_destroy(&etnaviv_obj->base, etnaviv_obj->sgt); +} + +static void *etnaviv_gem_prime_vmap_impl(struct etnaviv_gem_object *etnaviv_obj) +{ + lockdep_assert_held(&etnaviv_obj->lock); + + return dma_buf_vmap(etnaviv_obj->base.import_attach->dmabuf); +} + +static const struct etnaviv_gem_ops etnaviv_gem_prime_ops = { + /* .get_pages should never be called */ + .release = etnaviv_gem_prime_release, + .vmap = etnaviv_gem_prime_vmap_impl, +}; + +struct drm_gem_object *etnaviv_gem_prime_import_sg_table(struct drm_device *dev, + struct dma_buf_attachment *attach, struct sg_table *sgt) +{ + struct etnaviv_gem_object *etnaviv_obj; + size_t size = PAGE_ALIGN(attach->dmabuf->size); + int ret, npages; + + ret = etnaviv_gem_new_private(dev, size, ETNA_BO_WC, + attach->dmabuf->resv, + &etnaviv_gem_prime_ops, &etnaviv_obj); + if (ret < 0) + return ERR_PTR(ret); + + npages = size / PAGE_SIZE; + + etnaviv_obj->sgt = sgt; + etnaviv_obj->pages = drm_malloc_ab(npages, sizeof(struct page *)); + if (!etnaviv_obj->pages) { + ret = -ENOMEM; + goto fail; + } + + ret = drm_prime_sg_to_page_addr_arrays(sgt, etnaviv_obj->pages, + NULL, npages); + if (ret) + goto fail; + + ret = etnaviv_gem_obj_add(dev, &etnaviv_obj->base); + if (ret) + goto fail; + + return &etnaviv_obj->base; + +fail: + drm_gem_object_unreference_unlocked(&etnaviv_obj->base); + + return ERR_PTR(ret); +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c new file mode 100644 index 0000000..1aba01a --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c @@ -0,0 +1,443 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include "etnaviv_drv.h" +#include "etnaviv_gpu.h" +#include "etnaviv_gem.h" + +/* + * Cmdstream submission: + */ + +#define BO_INVALID_FLAGS ~(ETNA_SUBMIT_BO_READ | ETNA_SUBMIT_BO_WRITE) +/* make sure these don't conflict w/ ETNAVIV_SUBMIT_BO_x */ +#define BO_LOCKED 0x4000 +#define BO_PINNED 0x2000 + +static inline void __user *to_user_ptr(u64 address) +{ + return (void __user *)(uintptr_t)address; +} + +static struct etnaviv_gem_submit *submit_create(struct drm_device *dev, + struct etnaviv_gpu *gpu, size_t nr) +{ + struct etnaviv_gem_submit *submit; + size_t sz = size_vstruct(nr, sizeof(submit->bos[0]), sizeof(*submit)); + + submit = kmalloc(sz, GFP_TEMPORARY | __GFP_NOWARN | __GFP_NORETRY); + if (submit) { + submit->dev = dev; + submit->gpu = gpu; + + /* initially, until copy_from_user() and bo lookup succeeds: */ + submit->nr_bos = 0; + + ww_acquire_init(&submit->ticket, &reservation_ww_class); + } + + return submit; +} + +static int submit_lookup_objects(struct etnaviv_gem_submit *submit, + struct drm_file *file, struct drm_etnaviv_gem_submit_bo *submit_bos, + unsigned nr_bos) +{ + struct drm_etnaviv_gem_submit_bo *bo; + unsigned i; + int ret = 0; + + spin_lock(&file->table_lock); + + for (i = 0, bo = submit_bos; i < nr_bos; i++, bo++) { + struct drm_gem_object *obj; + + if (bo->flags & BO_INVALID_FLAGS) { + DRM_ERROR("invalid flags: %x\n", bo->flags); + ret = -EINVAL; + goto out_unlock; + } + + submit->bos[i].flags = bo->flags; + + /* normally use drm_gem_object_lookup(), but for bulk lookup + * all under single table_lock just hit object_idr directly: + */ + obj = idr_find(&file->object_idr, bo->handle); + if (!obj) { + DRM_ERROR("invalid handle %u at index %u\n", + bo->handle, i); + ret = -EINVAL; + goto out_unlock; + } + + /* + * Take a refcount on the object. The file table lock + * prevents the object_idr's refcount on this being dropped. + */ + drm_gem_object_reference(obj); + + submit->bos[i].obj = to_etnaviv_bo(obj); + } + +out_unlock: + submit->nr_bos = i; + spin_unlock(&file->table_lock); + + return ret; +} + +static void submit_unlock_object(struct etnaviv_gem_submit *submit, int i) +{ + if (submit->bos[i].flags & BO_LOCKED) { + struct etnaviv_gem_object *etnaviv_obj = submit->bos[i].obj; + + ww_mutex_unlock(&etnaviv_obj->resv->lock); + submit->bos[i].flags &= ~BO_LOCKED; + } +} + +static int submit_lock_objects(struct etnaviv_gem_submit *submit) +{ + int contended, slow_locked = -1, i, ret = 0; + +retry: + for (i = 0; i < submit->nr_bos; i++) { + struct etnaviv_gem_object *etnaviv_obj = submit->bos[i].obj; + + if (slow_locked == i) + slow_locked = -1; + + contended = i; + + if (!(submit->bos[i].flags & BO_LOCKED)) { + ret = ww_mutex_lock_interruptible(&etnaviv_obj->resv->lock, + &submit->ticket); + if (ret == -EALREADY) + DRM_ERROR("BO at index %u already on submit list\n", + i); + if (ret) + goto fail; + submit->bos[i].flags |= BO_LOCKED; + } + } + + ww_acquire_done(&submit->ticket); + + return 0; + +fail: + for (; i >= 0; i--) + submit_unlock_object(submit, i); + + if (slow_locked > 0) + submit_unlock_object(submit, slow_locked); + + if (ret == -EDEADLK) { + struct etnaviv_gem_object *etnaviv_obj; + + etnaviv_obj = submit->bos[contended].obj; + + /* we lost out in a seqno race, lock and retry.. */ + ret = ww_mutex_lock_slow_interruptible(&etnaviv_obj->resv->lock, + &submit->ticket); + if (!ret) { + submit->bos[contended].flags |= BO_LOCKED; + slow_locked = contended; + goto retry; + } + } + + return ret; +} + +static int submit_fence_sync(const struct etnaviv_gem_submit *submit) +{ + unsigned int context = submit->gpu->fence_context; + int i, ret = 0; + + for (i = 0; i < submit->nr_bos; i++) { + struct etnaviv_gem_object *etnaviv_obj = submit->bos[i].obj; + bool write = submit->bos[i].flags & ETNA_SUBMIT_BO_WRITE; + + ret = etnaviv_gpu_fence_sync_obj(etnaviv_obj, context, write); + if (ret) + break; + } + + return ret; +} + +static void submit_unpin_objects(struct etnaviv_gem_submit *submit) +{ + int i; + + for (i = 0; i < submit->nr_bos; i++) { + struct etnaviv_gem_object *etnaviv_obj = submit->bos[i].obj; + + if (submit->bos[i].flags & BO_PINNED) + etnaviv_gem_put_iova(submit->gpu, &etnaviv_obj->base); + + submit->bos[i].iova = 0; + submit->bos[i].flags &= ~BO_PINNED; + } +} + +static int submit_pin_objects(struct etnaviv_gem_submit *submit) +{ + int i, ret = 0; + + for (i = 0; i < submit->nr_bos; i++) { + struct etnaviv_gem_object *etnaviv_obj = submit->bos[i].obj; + u32 iova; + + ret = etnaviv_gem_get_iova(submit->gpu, &etnaviv_obj->base, + &iova); + if (ret) + break; + + submit->bos[i].flags |= BO_PINNED; + submit->bos[i].iova = iova; + } + + return ret; +} + +static int submit_bo(struct etnaviv_gem_submit *submit, u32 idx, + struct etnaviv_gem_object **obj, u32 *iova) +{ + if (idx >= submit->nr_bos) { + DRM_ERROR("invalid buffer index: %u (out of %u)\n", + idx, submit->nr_bos); + return -EINVAL; + } + + if (obj) + *obj = submit->bos[idx].obj; + if (iova) + *iova = submit->bos[idx].iova; + + return 0; +} + +/* process the reloc's and patch up the cmdstream as needed: */ +static int submit_reloc(struct etnaviv_gem_submit *submit, void *stream, + u32 size, const struct drm_etnaviv_gem_submit_reloc *relocs, + u32 nr_relocs) +{ + u32 i, last_offset = 0; + u32 *ptr = stream; + int ret; + + for (i = 0; i < nr_relocs; i++) { + const struct drm_etnaviv_gem_submit_reloc *r = relocs + i; + struct etnaviv_gem_object *bobj; + u32 iova, off; + + if (unlikely(r->flags)) { + DRM_ERROR("invalid reloc flags\n"); + return -EINVAL; + } + + if (r->submit_offset % 4) { + DRM_ERROR("non-aligned reloc offset: %u\n", + r->submit_offset); + return -EINVAL; + } + + /* offset in dwords: */ + off = r->submit_offset / 4; + + if ((off >= size ) || + (off < last_offset)) { + DRM_ERROR("invalid offset %u at reloc %u\n", off, i); + return -EINVAL; + } + + ret = submit_bo(submit, r->reloc_idx, &bobj, &iova); + if (ret) + return ret; + + if (r->reloc_offset >= + bobj->base.size - sizeof(*ptr)) { + DRM_ERROR("relocation %u outside object", i); + return -EINVAL; + } + + ptr[off] = iova + r->reloc_offset; + + last_offset = off; + } + + return 0; +} + +static void submit_cleanup(struct etnaviv_gem_submit *submit) +{ + unsigned i; + + for (i = 0; i < submit->nr_bos; i++) { + struct etnaviv_gem_object *etnaviv_obj = submit->bos[i].obj; + + submit_unlock_object(submit, i); + drm_gem_object_unreference_unlocked(&etnaviv_obj->base); + } + + ww_acquire_fini(&submit->ticket); + kfree(submit); +} + +int etnaviv_ioctl_gem_submit(struct drm_device *dev, void *data, + struct drm_file *file) +{ + struct etnaviv_drm_private *priv = dev->dev_private; + struct drm_etnaviv_gem_submit *args = data; + struct drm_etnaviv_gem_submit_reloc *relocs; + struct drm_etnaviv_gem_submit_bo *bos; + struct etnaviv_gem_submit *submit; + struct etnaviv_cmdbuf *cmdbuf; + struct etnaviv_gpu *gpu; + void *stream; + int ret; + + if (args->pipe >= ETNA_MAX_PIPES) + return -EINVAL; + + gpu = priv->gpu[args->pipe]; + if (!gpu) + return -ENXIO; + + if (args->stream_size % 4) { + DRM_ERROR("non-aligned cmdstream buffer size: %u\n", + args->stream_size); + return -EINVAL; + } + + if (args->exec_state != ETNA_PIPE_3D && + args->exec_state != ETNA_PIPE_2D && + args->exec_state != ETNA_PIPE_VG) { + DRM_ERROR("invalid exec_state: 0x%x\n", args->exec_state); + return -EINVAL; + } + + /* + * Copy the command submission and bo array to kernel space in + * one go, and do this outside of any locks. + */ + bos = drm_malloc_ab(args->nr_bos, sizeof(*bos)); + relocs = drm_malloc_ab(args->nr_relocs, sizeof(*relocs)); + stream = drm_malloc_ab(1, args->stream_size); + cmdbuf = etnaviv_gpu_cmdbuf_new(gpu, ALIGN(args->stream_size, 8) + 8, + args->nr_bos); + if (!bos || !relocs || !stream || !cmdbuf) { + ret = -ENOMEM; + goto err_submit_cmds; + } + + cmdbuf->exec_state = args->exec_state; + cmdbuf->ctx = file->driver_priv; + + ret = copy_from_user(bos, to_user_ptr(args->bos), + args->nr_bos * sizeof(*bos)); + if (ret) { + ret = -EFAULT; + goto err_submit_cmds; + } + + ret = copy_from_user(relocs, to_user_ptr(args->relocs), + args->nr_relocs * sizeof(*relocs)); + if (ret) { + ret = -EFAULT; + goto err_submit_cmds; + } + + ret = copy_from_user(stream, to_user_ptr(args->stream), + args->stream_size); + if (ret) { + ret = -EFAULT; + goto err_submit_cmds; + } + + submit = submit_create(dev, gpu, args->nr_bos); + if (!submit) { + ret = -ENOMEM; + goto err_submit_cmds; + } + + ret = submit_lookup_objects(submit, file, bos, args->nr_bos); + if (ret) + goto err_submit_objects; + + ret = submit_lock_objects(submit); + if (ret) + goto err_submit_objects; + + if (!etnaviv_cmd_validate_one(gpu, stream, args->stream_size / 4, + relocs, args->nr_relocs)) { + ret = -EINVAL; + goto err_submit_objects; + } + + ret = submit_fence_sync(submit); + if (ret) + goto err_submit_objects; + + ret = submit_pin_objects(submit); + if (ret) + goto out; + + ret = submit_reloc(submit, stream, args->stream_size / 4, + relocs, args->nr_relocs); + if (ret) + goto out; + + memcpy(cmdbuf->vaddr, stream, args->stream_size); + cmdbuf->user_size = ALIGN(args->stream_size, 8); + + ret = etnaviv_gpu_submit(gpu, submit, cmdbuf); + if (ret == 0) + cmdbuf = NULL; + + args->fence = submit->fence; + +out: + submit_unpin_objects(submit); + + /* + * If we're returning -EAGAIN, it may be due to the userptr code + * wanting to run its workqueue outside of any locks. Flush our + * workqueue to ensure that it is run in a timely manner. + */ + if (ret == -EAGAIN) + flush_workqueue(priv->wq); + +err_submit_objects: + submit_cleanup(submit); + +err_submit_cmds: + /* if we still own the cmdbuf */ + if (cmdbuf) + etnaviv_gpu_cmdbuf_free(cmdbuf); + if (stream) + drm_free_large(stream); + if (bos) + drm_free_large(bos); + if (relocs) + drm_free_large(relocs); + + return ret; +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c new file mode 100644 index 0000000..a33162c --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -0,0 +1,1712 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include "etnaviv_dump.h" +#include "etnaviv_gpu.h" +#include "etnaviv_gem.h" +#include "etnaviv_mmu.h" +#include "etnaviv_iommu.h" +#include "etnaviv_iommu_v2.h" +#include "common.xml.h" +#include "state.xml.h" +#include "state_hi.xml.h" +#include "cmdstream.xml.h" + +static const struct platform_device_id gpu_ids[] = { + { .name = "etnaviv-gpu,2d" }, + { }, +}; + +static bool etnaviv_dump_core = true; +module_param_named(dump_core, etnaviv_dump_core, bool, 0600); + +/* + * Driver functions: + */ + +int etnaviv_gpu_get_param(struct etnaviv_gpu *gpu, u32 param, u64 *value) +{ + switch (param) { + case ETNAVIV_PARAM_GPU_MODEL: + *value = gpu->identity.model; + break; + + case ETNAVIV_PARAM_GPU_REVISION: + *value = gpu->identity.revision; + break; + + case ETNAVIV_PARAM_GPU_FEATURES_0: + *value = gpu->identity.features; + break; + + case ETNAVIV_PARAM_GPU_FEATURES_1: + *value = gpu->identity.minor_features0; + break; + + case ETNAVIV_PARAM_GPU_FEATURES_2: + *value = gpu->identity.minor_features1; + break; + + case ETNAVIV_PARAM_GPU_FEATURES_3: + *value = gpu->identity.minor_features2; + break; + + case ETNAVIV_PARAM_GPU_FEATURES_4: + *value = gpu->identity.minor_features3; + break; + + case ETNAVIV_PARAM_GPU_FEATURES_5: + *value = gpu->identity.minor_features4; + break; + + case ETNAVIV_PARAM_GPU_FEATURES_6: + *value = gpu->identity.minor_features5; + break; + + case ETNAVIV_PARAM_GPU_STREAM_COUNT: + *value = gpu->identity.stream_count; + break; + + case ETNAVIV_PARAM_GPU_REGISTER_MAX: + *value = gpu->identity.register_max; + break; + + case ETNAVIV_PARAM_GPU_THREAD_COUNT: + *value = gpu->identity.thread_count; + break; + + case ETNAVIV_PARAM_GPU_VERTEX_CACHE_SIZE: + *value = gpu->identity.vertex_cache_size; + break; + + case ETNAVIV_PARAM_GPU_SHADER_CORE_COUNT: + *value = gpu->identity.shader_core_count; + break; + + case ETNAVIV_PARAM_GPU_PIXEL_PIPES: + *value = gpu->identity.pixel_pipes; + break; + + case ETNAVIV_PARAM_GPU_VERTEX_OUTPUT_BUFFER_SIZE: + *value = gpu->identity.vertex_output_buffer_size; + break; + + case ETNAVIV_PARAM_GPU_BUFFER_SIZE: + *value = gpu->identity.buffer_size; + break; + + case ETNAVIV_PARAM_GPU_INSTRUCTION_COUNT: + *value = gpu->identity.instruction_count; + break; + + case ETNAVIV_PARAM_GPU_NUM_CONSTANTS: + *value = gpu->identity.num_constants; + break; + + case ETNAVIV_PARAM_GPU_NUM_VARYINGS: + *value = gpu->identity.varyings_count; + break; + + default: + DBG("%s: invalid param: %u", dev_name(gpu->dev), param); + return -EINVAL; + } + + return 0; +} + + +#define etnaviv_is_model_rev(gpu, mod, rev) \ + ((gpu)->identity.model == chipModel_##mod && \ + (gpu)->identity.revision == rev) +#define etnaviv_field(val, field) \ + (((val) & field##__MASK) >> field##__SHIFT) + +static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) +{ + if (gpu->identity.minor_features0 & + chipMinorFeatures0_MORE_MINOR_FEATURES) { + u32 specs[4]; + unsigned int streams; + + specs[0] = gpu_read(gpu, VIVS_HI_CHIP_SPECS); + specs[1] = gpu_read(gpu, VIVS_HI_CHIP_SPECS_2); + specs[2] = gpu_read(gpu, VIVS_HI_CHIP_SPECS_3); + specs[3] = gpu_read(gpu, VIVS_HI_CHIP_SPECS_4); + + gpu->identity.stream_count = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_STREAM_COUNT); + gpu->identity.register_max = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_REGISTER_MAX); + gpu->identity.thread_count = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_THREAD_COUNT); + gpu->identity.vertex_cache_size = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE); + gpu->identity.shader_core_count = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT); + gpu->identity.pixel_pipes = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_PIXEL_PIPES); + gpu->identity.vertex_output_buffer_size = + etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE); + + gpu->identity.buffer_size = etnaviv_field(specs[1], + VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE); + gpu->identity.instruction_count = etnaviv_field(specs[1], + VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT); + gpu->identity.num_constants = etnaviv_field(specs[1], + VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS); + + gpu->identity.varyings_count = etnaviv_field(specs[2], + VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT); + + /* This overrides the value from older register if non-zero */ + streams = etnaviv_field(specs[3], + VIVS_HI_CHIP_SPECS_4_STREAM_COUNT); + if (streams) + gpu->identity.stream_count = streams; + } + + /* Fill in the stream count if not specified */ + if (gpu->identity.stream_count == 0) { + if (gpu->identity.model >= 0x1000) + gpu->identity.stream_count = 4; + else + gpu->identity.stream_count = 1; + } + + /* Convert the register max value */ + if (gpu->identity.register_max) + gpu->identity.register_max = 1 << gpu->identity.register_max; + else if (gpu->identity.model == chipModel_GC400) + gpu->identity.register_max = 32; + else + gpu->identity.register_max = 64; + + /* Convert thread count */ + if (gpu->identity.thread_count) + gpu->identity.thread_count = 1 << gpu->identity.thread_count; + else if (gpu->identity.model == chipModel_GC400) + gpu->identity.thread_count = 64; + else if (gpu->identity.model == chipModel_GC500 || + gpu->identity.model == chipModel_GC530) + gpu->identity.thread_count = 128; + else + gpu->identity.thread_count = 256; + + if (gpu->identity.vertex_cache_size == 0) + gpu->identity.vertex_cache_size = 8; + + if (gpu->identity.shader_core_count == 0) { + if (gpu->identity.model >= 0x1000) + gpu->identity.shader_core_count = 2; + else + gpu->identity.shader_core_count = 1; + } + + if (gpu->identity.pixel_pipes == 0) + gpu->identity.pixel_pipes = 1; + + /* Convert virtex buffer size */ + if (gpu->identity.vertex_output_buffer_size) { + gpu->identity.vertex_output_buffer_size = + 1 << gpu->identity.vertex_output_buffer_size; + } else if (gpu->identity.model == chipModel_GC400) { + if (gpu->identity.revision < 0x4000) + gpu->identity.vertex_output_buffer_size = 512; + else if (gpu->identity.revision < 0x4200) + gpu->identity.vertex_output_buffer_size = 256; + else + gpu->identity.vertex_output_buffer_size = 128; + } else { + gpu->identity.vertex_output_buffer_size = 512; + } + + switch (gpu->identity.instruction_count) { + case 0: + if (etnaviv_is_model_rev(gpu, GC2000, 0x5108) || + gpu->identity.model == chipModel_GC880) + gpu->identity.instruction_count = 512; + else + gpu->identity.instruction_count = 256; + break; + + case 1: + gpu->identity.instruction_count = 1024; + break; + + case 2: + gpu->identity.instruction_count = 2048; + break; + + default: + gpu->identity.instruction_count = 256; + break; + } + + if (gpu->identity.num_constants == 0) + gpu->identity.num_constants = 168; + + if (gpu->identity.varyings_count == 0) { + if (gpu->identity.minor_features1 & chipMinorFeatures1_HALTI0) + gpu->identity.varyings_count = 12; + else + gpu->identity.varyings_count = 8; + } + + /* + * For some cores, two varyings are consumed for position, so the + * maximum varying count needs to be reduced by one. + */ + if (etnaviv_is_model_rev(gpu, GC5000, 0x5434) || + etnaviv_is_model_rev(gpu, GC4000, 0x5222) || + etnaviv_is_model_rev(gpu, GC4000, 0x5245) || + etnaviv_is_model_rev(gpu, GC4000, 0x5208) || + etnaviv_is_model_rev(gpu, GC3000, 0x5435) || + etnaviv_is_model_rev(gpu, GC2200, 0x5244) || + etnaviv_is_model_rev(gpu, GC2100, 0x5108) || + etnaviv_is_model_rev(gpu, GC2000, 0x5108) || + etnaviv_is_model_rev(gpu, GC1500, 0x5246) || + etnaviv_is_model_rev(gpu, GC880, 0x5107) || + etnaviv_is_model_rev(gpu, GC880, 0x5106)) + gpu->identity.varyings_count -= 1; +} + +static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) +{ + u32 chipIdentity; + + chipIdentity = gpu_read(gpu, VIVS_HI_CHIP_IDENTITY); + + /* Special case for older graphic cores. */ + if (etnaviv_field(chipIdentity, VIVS_HI_CHIP_IDENTITY_FAMILY) == 0x01) { + gpu->identity.model = chipModel_GC500; + gpu->identity.revision = etnaviv_field(chipIdentity, + VIVS_HI_CHIP_IDENTITY_REVISION); + } else { + + gpu->identity.model = gpu_read(gpu, VIVS_HI_CHIP_MODEL); + gpu->identity.revision = gpu_read(gpu, VIVS_HI_CHIP_REV); + + /* + * !!!! HACK ALERT !!!! + * Because people change device IDs without letting software + * know about it - here is the hack to make it all look the + * same. Only for GC400 family. + */ + if ((gpu->identity.model & 0xff00) == 0x0400 && + gpu->identity.model != chipModel_GC420) { + gpu->identity.model = gpu->identity.model & 0x0400; + } + + /* Another special case */ + if (etnaviv_is_model_rev(gpu, GC300, 0x2201)) { + u32 chipDate = gpu_read(gpu, VIVS_HI_CHIP_DATE); + u32 chipTime = gpu_read(gpu, VIVS_HI_CHIP_TIME); + + if (chipDate == 0x20080814 && chipTime == 0x12051100) { + /* + * This IP has an ECO; put the correct + * revision in it. + */ + gpu->identity.revision = 0x1051; + } + } + } + + dev_info(gpu->dev, "model: GC%x, revision: %x\n", + gpu->identity.model, gpu->identity.revision); + + gpu->identity.features = gpu_read(gpu, VIVS_HI_CHIP_FEATURE); + + /* Disable fast clear on GC700. */ + if (gpu->identity.model == chipModel_GC700) + gpu->identity.features &= ~chipFeatures_FAST_CLEAR; + + if ((gpu->identity.model == chipModel_GC500 && + gpu->identity.revision < 2) || + (gpu->identity.model == chipModel_GC300 && + gpu->identity.revision < 0x2000)) { + + /* + * GC500 rev 1.x and GC300 rev < 2.0 doesn't have these + * registers. + */ + gpu->identity.minor_features0 = 0; + gpu->identity.minor_features1 = 0; + gpu->identity.minor_features2 = 0; + gpu->identity.minor_features3 = 0; + gpu->identity.minor_features4 = 0; + gpu->identity.minor_features5 = 0; + } else + gpu->identity.minor_features0 = + gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_0); + + if (gpu->identity.minor_features0 & + chipMinorFeatures0_MORE_MINOR_FEATURES) { + gpu->identity.minor_features1 = + gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_1); + gpu->identity.minor_features2 = + gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_2); + gpu->identity.minor_features3 = + gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_3); + gpu->identity.minor_features4 = + gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_4); + gpu->identity.minor_features5 = + gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_5); + } + + /* GC600 idle register reports zero bits where modules aren't present */ + if (gpu->identity.model == chipModel_GC600) { + gpu->idle_mask = VIVS_HI_IDLE_STATE_TX | + VIVS_HI_IDLE_STATE_RA | + VIVS_HI_IDLE_STATE_SE | + VIVS_HI_IDLE_STATE_PA | + VIVS_HI_IDLE_STATE_SH | + VIVS_HI_IDLE_STATE_PE | + VIVS_HI_IDLE_STATE_DE | + VIVS_HI_IDLE_STATE_FE; + } else { + gpu->idle_mask = ~VIVS_HI_IDLE_STATE_AXI_LP; + } + + etnaviv_hw_specs(gpu); +} + +static void etnaviv_gpu_load_clock(struct etnaviv_gpu *gpu, u32 clock) +{ + gpu_write(gpu, VIVS_HI_CLOCK_CONTROL, clock | + VIVS_HI_CLOCK_CONTROL_FSCALE_CMD_LOAD); + gpu_write(gpu, VIVS_HI_CLOCK_CONTROL, clock); +} + +static int etnaviv_hw_reset(struct etnaviv_gpu *gpu) +{ + u32 control, idle; + unsigned long timeout; + bool failed = true; + + /* TODO + * + * - clock gating + * - puls eater + * - what about VG? + */ + + /* We hope that the GPU resets in under one second */ + timeout = jiffies + msecs_to_jiffies(1000); + + while (time_is_after_jiffies(timeout)) { + control = VIVS_HI_CLOCK_CONTROL_DISABLE_DEBUG_REGISTERS | + VIVS_HI_CLOCK_CONTROL_FSCALE_VAL(0x40); + + /* enable clock */ + etnaviv_gpu_load_clock(gpu, control); + + /* Wait for stable clock. Vivante's code waited for 1ms */ + usleep_range(1000, 10000); + + /* isolate the GPU. */ + control |= VIVS_HI_CLOCK_CONTROL_ISOLATE_GPU; + gpu_write(gpu, VIVS_HI_CLOCK_CONTROL, control); + + /* set soft reset. */ + control |= VIVS_HI_CLOCK_CONTROL_SOFT_RESET; + gpu_write(gpu, VIVS_HI_CLOCK_CONTROL, control); + + /* wait for reset. */ + msleep(1); + + /* reset soft reset bit. */ + control &= ~VIVS_HI_CLOCK_CONTROL_SOFT_RESET; + gpu_write(gpu, VIVS_HI_CLOCK_CONTROL, control); + + /* reset GPU isolation. */ + control &= ~VIVS_HI_CLOCK_CONTROL_ISOLATE_GPU; + gpu_write(gpu, VIVS_HI_CLOCK_CONTROL, control); + + /* read idle register. */ + idle = gpu_read(gpu, VIVS_HI_IDLE_STATE); + + /* try reseting again if FE it not idle */ + if ((idle & VIVS_HI_IDLE_STATE_FE) == 0) { + dev_dbg(gpu->dev, "FE is not idle\n"); + continue; + } + + /* read reset register. */ + control = gpu_read(gpu, VIVS_HI_CLOCK_CONTROL); + + /* is the GPU idle? */ + if (((control & VIVS_HI_CLOCK_CONTROL_IDLE_3D) == 0) || + ((control & VIVS_HI_CLOCK_CONTROL_IDLE_2D) == 0)) { + dev_dbg(gpu->dev, "GPU is not idle\n"); + continue; + } + + failed = false; + break; + } + + if (failed) { + idle = gpu_read(gpu, VIVS_HI_IDLE_STATE); + control = gpu_read(gpu, VIVS_HI_CLOCK_CONTROL); + + dev_err(gpu->dev, "GPU failed to reset: FE %sidle, 3D %sidle, 2D %sidle\n", + idle & VIVS_HI_IDLE_STATE_FE ? "" : "not ", + control & VIVS_HI_CLOCK_CONTROL_IDLE_3D ? "" : "not ", + control & VIVS_HI_CLOCK_CONTROL_IDLE_2D ? "" : "not "); + + return -EBUSY; + } + + /* We rely on the GPU running, so program the clock */ + control = VIVS_HI_CLOCK_CONTROL_DISABLE_DEBUG_REGISTERS | + VIVS_HI_CLOCK_CONTROL_FSCALE_VAL(0x40); + + /* enable clock */ + etnaviv_gpu_load_clock(gpu, control); + + return 0; +} + +static void etnaviv_gpu_hw_init(struct etnaviv_gpu *gpu) +{ + u16 prefetch; + + if ((etnaviv_is_model_rev(gpu, GC320, 0x5007) || + etnaviv_is_model_rev(gpu, GC320, 0x5220)) && + gpu_read(gpu, VIVS_HI_CHIP_TIME) != 0x2062400) { + u32 mc_memory_debug; + + mc_memory_debug = gpu_read(gpu, VIVS_MC_DEBUG_MEMORY) & ~0xff; + + if (gpu->identity.revision == 0x5007) + mc_memory_debug |= 0x0c; + else + mc_memory_debug |= 0x08; + + gpu_write(gpu, VIVS_MC_DEBUG_MEMORY, mc_memory_debug); + } + + /* + * Update GPU AXI cache atttribute to "cacheable, no allocate". + * This is necessary to prevent the iMX6 SoC locking up. + */ + gpu_write(gpu, VIVS_HI_AXI_CONFIG, + VIVS_HI_AXI_CONFIG_AWCACHE(2) | + VIVS_HI_AXI_CONFIG_ARCACHE(2)); + + /* GC2000 rev 5108 needs a special bus config */ + if (etnaviv_is_model_rev(gpu, GC2000, 0x5108)) { + u32 bus_config = gpu_read(gpu, VIVS_MC_BUS_CONFIG); + bus_config &= ~(VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG__MASK | + VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG__MASK); + bus_config |= VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG(1) | + VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG(0); + gpu_write(gpu, VIVS_MC_BUS_CONFIG, bus_config); + } + + /* set base addresses */ + gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_RA, gpu->memory_base); + gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_FE, gpu->memory_base); + gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_TX, gpu->memory_base); + gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_PEZ, gpu->memory_base); + gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_PE, gpu->memory_base); + + /* setup the MMU page table pointers */ + etnaviv_iommu_domain_restore(gpu, gpu->mmu->domain); + + /* Start command processor */ + prefetch = etnaviv_buffer_init(gpu); + + gpu_write(gpu, VIVS_HI_INTR_ENBL, ~0U); + gpu_write(gpu, VIVS_FE_COMMAND_ADDRESS, + gpu->buffer->paddr - gpu->memory_base); + gpu_write(gpu, VIVS_FE_COMMAND_CONTROL, + VIVS_FE_COMMAND_CONTROL_ENABLE | + VIVS_FE_COMMAND_CONTROL_PREFETCH(prefetch)); +} + +int etnaviv_gpu_init(struct etnaviv_gpu *gpu) +{ + int ret, i; + struct iommu_domain *iommu; + enum etnaviv_iommu_version version; + bool mmuv2; + + ret = pm_runtime_get_sync(gpu->dev); + if (ret < 0) + return ret; + + etnaviv_hw_identify(gpu); + + if (gpu->identity.model == 0) { + dev_err(gpu->dev, "Unknown GPU model\n"); + ret = -ENXIO; + goto fail; + } + + /* Exclude VG cores with FE2.0 */ + if (gpu->identity.features & chipFeatures_PIPE_VG && + gpu->identity.features & chipFeatures_FE20) { + dev_info(gpu->dev, "Ignoring GPU with VG and FE2.0\n"); + ret = -ENXIO; + goto fail; + } + + ret = etnaviv_hw_reset(gpu); + if (ret) + goto fail; + + /* Setup IOMMU.. eventually we will (I think) do this once per context + * and have separate page tables per context. For now, to keep things + * simple and to get something working, just use a single address space: + */ + mmuv2 = gpu->identity.minor_features1 & chipMinorFeatures1_MMU_VERSION; + dev_dbg(gpu->dev, "mmuv2: %d\n", mmuv2); + + if (!mmuv2) { + iommu = etnaviv_iommu_domain_alloc(gpu); + version = ETNAVIV_IOMMU_V1; + } else { + iommu = etnaviv_iommu_v2_domain_alloc(gpu); + version = ETNAVIV_IOMMU_V2; + } + + if (!iommu) { + ret = -ENOMEM; + goto fail; + } + + gpu->mmu = etnaviv_iommu_new(gpu, iommu, version); + if (!gpu->mmu) { + iommu_domain_free(iommu); + ret = -ENOMEM; + goto fail; + } + + /* Create buffer: */ + gpu->buffer = etnaviv_gpu_cmdbuf_new(gpu, PAGE_SIZE, 0); + if (!gpu->buffer) { + ret = -ENOMEM; + dev_err(gpu->dev, "could not create command buffer\n"); + goto destroy_iommu; + } + if (gpu->buffer->paddr - gpu->memory_base > 0x80000000) { + ret = -EINVAL; + dev_err(gpu->dev, + "command buffer outside valid memory window\n"); + goto free_buffer; + } + + /* Setup event management */ + spin_lock_init(&gpu->event_spinlock); + init_completion(&gpu->event_free); + for (i = 0; i < ARRAY_SIZE(gpu->event); i++) { + gpu->event[i].used = false; + complete(&gpu->event_free); + } + + /* Now program the hardware */ + mutex_lock(&gpu->lock); + etnaviv_gpu_hw_init(gpu); + mutex_unlock(&gpu->lock); + + pm_runtime_mark_last_busy(gpu->dev); + pm_runtime_put_autosuspend(gpu->dev); + + return 0; + +free_buffer: + etnaviv_gpu_cmdbuf_free(gpu->buffer); + gpu->buffer = NULL; +destroy_iommu: + etnaviv_iommu_destroy(gpu->mmu); + gpu->mmu = NULL; +fail: + pm_runtime_mark_last_busy(gpu->dev); + pm_runtime_put_autosuspend(gpu->dev); + + return ret; +} + +#ifdef CONFIG_DEBUG_FS +struct dma_debug { + u32 address[2]; + u32 state[2]; +}; + +static void verify_dma(struct etnaviv_gpu *gpu, struct dma_debug *debug) +{ + u32 i; + + debug->address[0] = gpu_read(gpu, VIVS_FE_DMA_ADDRESS); + debug->state[0] = gpu_read(gpu, VIVS_FE_DMA_DEBUG_STATE); + + for (i = 0; i < 500; i++) { + debug->address[1] = gpu_read(gpu, VIVS_FE_DMA_ADDRESS); + debug->state[1] = gpu_read(gpu, VIVS_FE_DMA_DEBUG_STATE); + + if (debug->address[0] != debug->address[1]) + break; + + if (debug->state[0] != debug->state[1]) + break; + } +} + +int etnaviv_gpu_debugfs(struct etnaviv_gpu *gpu, struct seq_file *m) +{ + struct dma_debug debug; + u32 dma_lo, dma_hi, axi, idle; + int ret; + + seq_printf(m, "%s Status:\n", dev_name(gpu->dev)); + + ret = pm_runtime_get_sync(gpu->dev); + if (ret < 0) + return ret; + + dma_lo = gpu_read(gpu, VIVS_FE_DMA_LOW); + dma_hi = gpu_read(gpu, VIVS_FE_DMA_HIGH); + axi = gpu_read(gpu, VIVS_HI_AXI_STATUS); + idle = gpu_read(gpu, VIVS_HI_IDLE_STATE); + + verify_dma(gpu, &debug); + + seq_puts(m, "\tfeatures\n"); + seq_printf(m, "\t minor_features0: 0x%08x\n", + gpu->identity.minor_features0); + seq_printf(m, "\t minor_features1: 0x%08x\n", + gpu->identity.minor_features1); + seq_printf(m, "\t minor_features2: 0x%08x\n", + gpu->identity.minor_features2); + seq_printf(m, "\t minor_features3: 0x%08x\n", + gpu->identity.minor_features3); + seq_printf(m, "\t minor_features4: 0x%08x\n", + gpu->identity.minor_features4); + seq_printf(m, "\t minor_features5: 0x%08x\n", + gpu->identity.minor_features5); + + seq_puts(m, "\tspecs\n"); + seq_printf(m, "\t stream_count: %d\n", + gpu->identity.stream_count); + seq_printf(m, "\t register_max: %d\n", + gpu->identity.register_max); + seq_printf(m, "\t thread_count: %d\n", + gpu->identity.thread_count); + seq_printf(m, "\t vertex_cache_size: %d\n", + gpu->identity.vertex_cache_size); + seq_printf(m, "\t shader_core_count: %d\n", + gpu->identity.shader_core_count); + seq_printf(m, "\t pixel_pipes: %d\n", + gpu->identity.pixel_pipes); + seq_printf(m, "\t vertex_output_buffer_size: %d\n", + gpu->identity.vertex_output_buffer_size); + seq_printf(m, "\t buffer_size: %d\n", + gpu->identity.buffer_size); + seq_printf(m, "\t instruction_count: %d\n", + gpu->identity.instruction_count); + seq_printf(m, "\t num_constants: %d\n", + gpu->identity.num_constants); + seq_printf(m, "\t varyings_count: %d\n", + gpu->identity.varyings_count); + + seq_printf(m, "\taxi: 0x%08x\n", axi); + seq_printf(m, "\tidle: 0x%08x\n", idle); + idle |= ~gpu->idle_mask & ~VIVS_HI_IDLE_STATE_AXI_LP; + if ((idle & VIVS_HI_IDLE_STATE_FE) == 0) + seq_puts(m, "\t FE is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_DE) == 0) + seq_puts(m, "\t DE is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_PE) == 0) + seq_puts(m, "\t PE is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_SH) == 0) + seq_puts(m, "\t SH is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_PA) == 0) + seq_puts(m, "\t PA is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_SE) == 0) + seq_puts(m, "\t SE is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_RA) == 0) + seq_puts(m, "\t RA is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_TX) == 0) + seq_puts(m, "\t TX is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_VG) == 0) + seq_puts(m, "\t VG is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_IM) == 0) + seq_puts(m, "\t IM is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_FP) == 0) + seq_puts(m, "\t FP is not idle\n"); + if ((idle & VIVS_HI_IDLE_STATE_TS) == 0) + seq_puts(m, "\t TS is not idle\n"); + if (idle & VIVS_HI_IDLE_STATE_AXI_LP) + seq_puts(m, "\t AXI low power mode\n"); + + if (gpu->identity.features & chipFeatures_DEBUG_MODE) { + u32 read0 = gpu_read(gpu, VIVS_MC_DEBUG_READ0); + u32 read1 = gpu_read(gpu, VIVS_MC_DEBUG_READ1); + u32 write = gpu_read(gpu, VIVS_MC_DEBUG_WRITE); + + seq_puts(m, "\tMC\n"); + seq_printf(m, "\t read0: 0x%08x\n", read0); + seq_printf(m, "\t read1: 0x%08x\n", read1); + seq_printf(m, "\t write: 0x%08x\n", write); + } + + seq_puts(m, "\tDMA "); + + if (debug.address[0] == debug.address[1] && + debug.state[0] == debug.state[1]) { + seq_puts(m, "seems to be stuck\n"); + } else if (debug.address[0] == debug.address[1]) { + seq_puts(m, "adress is constant\n"); + } else { + seq_puts(m, "is runing\n"); + } + + seq_printf(m, "\t address 0: 0x%08x\n", debug.address[0]); + seq_printf(m, "\t address 1: 0x%08x\n", debug.address[1]); + seq_printf(m, "\t state 0: 0x%08x\n", debug.state[0]); + seq_printf(m, "\t state 1: 0x%08x\n", debug.state[1]); + seq_printf(m, "\t last fetch 64 bit word: 0x%08x 0x%08x\n", + dma_lo, dma_hi); + + ret = 0; + + pm_runtime_mark_last_busy(gpu->dev); + pm_runtime_put_autosuspend(gpu->dev); + + return ret; +} +#endif + +/* + * Power Management: + */ +static int enable_clk(struct etnaviv_gpu *gpu) +{ + if (gpu->clk_core) + clk_prepare_enable(gpu->clk_core); + if (gpu->clk_shader) + clk_prepare_enable(gpu->clk_shader); + + return 0; +} + +static int disable_clk(struct etnaviv_gpu *gpu) +{ + if (gpu->clk_core) + clk_disable_unprepare(gpu->clk_core); + if (gpu->clk_shader) + clk_disable_unprepare(gpu->clk_shader); + + return 0; +} + +static int enable_axi(struct etnaviv_gpu *gpu) +{ + if (gpu->clk_bus) + clk_prepare_enable(gpu->clk_bus); + + return 0; +} + +static int disable_axi(struct etnaviv_gpu *gpu) +{ + if (gpu->clk_bus) + clk_disable_unprepare(gpu->clk_bus); + + return 0; +} + +/* + * Hangcheck detection for locked gpu: + */ +static void recover_worker(struct work_struct *work) +{ + struct etnaviv_gpu *gpu = container_of(work, struct etnaviv_gpu, + recover_work); + unsigned long flags; + unsigned int i; + + dev_err(gpu->dev, "hangcheck recover!\n"); + + if (pm_runtime_get_sync(gpu->dev) < 0) + return; + + mutex_lock(&gpu->lock); + + /* Only catch the first event, or when manually re-armed */ + if (etnaviv_dump_core) { + etnaviv_core_dump(gpu); + etnaviv_dump_core = false; + } + + etnaviv_hw_reset(gpu); + + /* complete all events, the GPU won't do it after the reset */ + spin_lock_irqsave(&gpu->event_spinlock, flags); + for (i = 0; i < ARRAY_SIZE(gpu->event); i++) { + if (!gpu->event[i].used) + continue; + fence_signal(gpu->event[i].fence); + gpu->event[i].fence = NULL; + gpu->event[i].used = false; + complete(&gpu->event_free); + /* + * Decrement the PM count for each stuck event. This is safe + * even in atomic context as we use ASYNC RPM here. + */ + pm_runtime_put_autosuspend(gpu->dev); + } + spin_unlock_irqrestore(&gpu->event_spinlock, flags); + gpu->completed_fence = gpu->active_fence; + + etnaviv_gpu_hw_init(gpu); + gpu->switch_context = true; + + mutex_unlock(&gpu->lock); + pm_runtime_mark_last_busy(gpu->dev); + pm_runtime_put_autosuspend(gpu->dev); + + /* Retire the buffer objects in a work */ + etnaviv_queue_work(gpu->drm, &gpu->retire_work); +} + +static void hangcheck_timer_reset(struct etnaviv_gpu *gpu) +{ + DBG("%s", dev_name(gpu->dev)); + mod_timer(&gpu->hangcheck_timer, + round_jiffies_up(jiffies + DRM_ETNAVIV_HANGCHECK_JIFFIES)); +} + +static void hangcheck_handler(unsigned long data) +{ + struct etnaviv_gpu *gpu = (struct etnaviv_gpu *)data; + u32 fence = gpu->completed_fence; + bool progress = false; + + if (fence != gpu->hangcheck_fence) { + gpu->hangcheck_fence = fence; + progress = true; + } + + if (!progress) { + u32 dma_addr = gpu_read(gpu, VIVS_FE_DMA_ADDRESS); + int change = dma_addr - gpu->hangcheck_dma_addr; + + if (change < 0 || change > 16) { + gpu->hangcheck_dma_addr = dma_addr; + progress = true; + } + } + + if (!progress && fence_after(gpu->active_fence, fence)) { + dev_err(gpu->dev, "hangcheck detected gpu lockup!\n"); + dev_err(gpu->dev, " completed fence: %u\n", fence); + dev_err(gpu->dev, " active fence: %u\n", + gpu->active_fence); + etnaviv_queue_work(gpu->drm, &gpu->recover_work); + } + + /* if still more pending work, reset the hangcheck timer: */ + if (fence_after(gpu->active_fence, gpu->hangcheck_fence)) + hangcheck_timer_reset(gpu); +} + +static void hangcheck_disable(struct etnaviv_gpu *gpu) +{ + del_timer_sync(&gpu->hangcheck_timer); + cancel_work_sync(&gpu->recover_work); +} + +/* fence object management */ +struct etnaviv_fence { + struct etnaviv_gpu *gpu; + struct fence base; +}; + +static inline struct etnaviv_fence *to_etnaviv_fence(struct fence *fence) +{ + return container_of(fence, struct etnaviv_fence, base); +} + +static const char *etnaviv_fence_get_driver_name(struct fence *fence) +{ + return "etnaviv"; +} + +static const char *etnaviv_fence_get_timeline_name(struct fence *fence) +{ + struct etnaviv_fence *f = to_etnaviv_fence(fence); + + return dev_name(f->gpu->dev); +} + +static bool etnaviv_fence_enable_signaling(struct fence *fence) +{ + return true; +} + +static bool etnaviv_fence_signaled(struct fence *fence) +{ + struct etnaviv_fence *f = to_etnaviv_fence(fence); + + return fence_completed(f->gpu, f->base.seqno); +} + +static void etnaviv_fence_release(struct fence *fence) +{ + struct etnaviv_fence *f = to_etnaviv_fence(fence); + + kfree_rcu(f, base.rcu); +} + +static const struct fence_ops etnaviv_fence_ops = { + .get_driver_name = etnaviv_fence_get_driver_name, + .get_timeline_name = etnaviv_fence_get_timeline_name, + .enable_signaling = etnaviv_fence_enable_signaling, + .signaled = etnaviv_fence_signaled, + .wait = fence_default_wait, + .release = etnaviv_fence_release, +}; + +static struct fence *etnaviv_gpu_fence_alloc(struct etnaviv_gpu *gpu) +{ + struct etnaviv_fence *f; + + f = kzalloc(sizeof(*f), GFP_KERNEL); + if (!f) + return NULL; + + f->gpu = gpu; + + fence_init(&f->base, &etnaviv_fence_ops, &gpu->fence_spinlock, + gpu->fence_context, ++gpu->next_fence); + + return &f->base; +} + +int etnaviv_gpu_fence_sync_obj(struct etnaviv_gem_object *etnaviv_obj, + unsigned int context, bool exclusive) +{ + struct reservation_object *robj = etnaviv_obj->resv; + struct reservation_object_list *fobj; + struct fence *fence; + int i, ret; + + if (!exclusive) { + ret = reservation_object_reserve_shared(robj); + if (ret) + return ret; + } + + /* + * If we have any shared fences, then the exclusive fence + * should be ignored as it will already have been signalled. + */ + fobj = reservation_object_get_list(robj); + if (!fobj || fobj->shared_count == 0) { + /* Wait on any existing exclusive fence which isn't our own */ + fence = reservation_object_get_excl(robj); + if (fence && fence->context != context) { + ret = fence_wait(fence, true); + if (ret) + return ret; + } + } + + if (!exclusive || !fobj) + return 0; + + for (i = 0; i < fobj->shared_count; i++) { + fence = rcu_dereference_protected(fobj->shared[i], + reservation_object_held(robj)); + if (fence->context != context) { + ret = fence_wait(fence, true); + if (ret) + return ret; + } + } + + return 0; +} + +/* + * event management: + */ + +static unsigned int event_alloc(struct etnaviv_gpu *gpu) +{ + unsigned long ret, flags; + unsigned int i, event = ~0U; + + ret = wait_for_completion_timeout(&gpu->event_free, + msecs_to_jiffies(10 * 10000)); + if (!ret) + dev_err(gpu->dev, "wait_for_completion_timeout failed"); + + spin_lock_irqsave(&gpu->event_spinlock, flags); + + /* find first free event */ + for (i = 0; i < ARRAY_SIZE(gpu->event); i++) { + if (gpu->event[i].used == false) { + gpu->event[i].used = true; + event = i; + break; + } + } + + spin_unlock_irqrestore(&gpu->event_spinlock, flags); + + return event; +} + +static void event_free(struct etnaviv_gpu *gpu, unsigned int event) +{ + unsigned long flags; + + spin_lock_irqsave(&gpu->event_spinlock, flags); + + if (gpu->event[event].used == false) { + dev_warn(gpu->dev, "event %u is already marked as free", + event); + spin_unlock_irqrestore(&gpu->event_spinlock, flags); + } else { + gpu->event[event].used = false; + spin_unlock_irqrestore(&gpu->event_spinlock, flags); + + complete(&gpu->event_free); + } +} + +/* + * Cmdstream submission/retirement: + */ + +struct etnaviv_cmdbuf *etnaviv_gpu_cmdbuf_new(struct etnaviv_gpu *gpu, u32 size, + size_t nr_bos) +{ + struct etnaviv_cmdbuf *cmdbuf; + size_t sz = size_vstruct(nr_bos, sizeof(cmdbuf->bo[0]), + sizeof(*cmdbuf)); + + cmdbuf = kzalloc(sz, GFP_KERNEL); + if (!cmdbuf) + return NULL; + + cmdbuf->vaddr = dma_alloc_writecombine(gpu->dev, size, &cmdbuf->paddr, + GFP_KERNEL); + if (!cmdbuf->vaddr) { + kfree(cmdbuf); + return NULL; + } + + cmdbuf->gpu = gpu; + cmdbuf->size = size; + + return cmdbuf; +} + +void etnaviv_gpu_cmdbuf_free(struct etnaviv_cmdbuf *cmdbuf) +{ + dma_free_writecombine(cmdbuf->gpu->dev, cmdbuf->size, + cmdbuf->vaddr, cmdbuf->paddr); + kfree(cmdbuf); +} + +static void retire_worker(struct work_struct *work) +{ + struct etnaviv_gpu *gpu = container_of(work, struct etnaviv_gpu, + retire_work); + u32 fence = gpu->completed_fence; + struct etnaviv_cmdbuf *cmdbuf, *tmp; + unsigned int i; + + mutex_lock(&gpu->lock); + list_for_each_entry_safe(cmdbuf, tmp, &gpu->active_cmd_list, node) { + if (!fence_is_signaled(cmdbuf->fence)) + break; + + list_del(&cmdbuf->node); + fence_put(cmdbuf->fence); + + for (i = 0; i < cmdbuf->nr_bos; i++) { + struct etnaviv_gem_object *etnaviv_obj = cmdbuf->bo[i]; + + atomic_dec(&etnaviv_obj->gpu_active); + /* drop the refcount taken in etnaviv_gpu_submit */ + etnaviv_gem_put_iova(gpu, &etnaviv_obj->base); + } + + etnaviv_gpu_cmdbuf_free(cmdbuf); + } + + gpu->retired_fence = fence; + + mutex_unlock(&gpu->lock); + + wake_up_all(&gpu->fence_event); +} + +int etnaviv_gpu_wait_fence_interruptible(struct etnaviv_gpu *gpu, + u32 fence, struct timespec *timeout) +{ + int ret; + + if (fence_after(fence, gpu->next_fence)) { + DRM_ERROR("waiting on invalid fence: %u (of %u)\n", + fence, gpu->next_fence); + return -EINVAL; + } + + if (!timeout) { + /* No timeout was requested: just test for completion */ + ret = fence_completed(gpu, fence) ? 0 : -EBUSY; + } else { + unsigned long remaining = etnaviv_timeout_to_jiffies(timeout); + + ret = wait_event_interruptible_timeout(gpu->fence_event, + fence_completed(gpu, fence), + remaining); + if (ret == 0) { + DBG("timeout waiting for fence: %u (retired: %u completed: %u)", + fence, gpu->retired_fence, + gpu->completed_fence); + ret = -ETIMEDOUT; + } else if (ret != -ERESTARTSYS) { + ret = 0; + } + } + + return ret; +} + +/* + * Wait for an object to become inactive. This, on it's own, is not race + * free: the object is moved by the retire worker off the active list, and + * then the iova is put. Moreover, the object could be re-submitted just + * after we notice that it's become inactive. + * + * Although the retirement happens under the gpu lock, we don't want to hold + * that lock in this function while waiting. + */ +int etnaviv_gpu_wait_obj_inactive(struct etnaviv_gpu *gpu, + struct etnaviv_gem_object *etnaviv_obj, struct timespec *timeout) +{ + unsigned long remaining; + long ret; + + if (!timeout) + return !is_active(etnaviv_obj) ? 0 : -EBUSY; + + remaining = etnaviv_timeout_to_jiffies(timeout); + + ret = wait_event_interruptible_timeout(gpu->fence_event, + !is_active(etnaviv_obj), + remaining); + if (ret > 0) { + struct etnaviv_drm_private *priv = gpu->drm->dev_private; + + /* Synchronise with the retire worker */ + flush_workqueue(priv->wq); + return 0; + } else if (ret == -ERESTARTSYS) { + return -ERESTARTSYS; + } else { + return -ETIMEDOUT; + } +} + +int etnaviv_gpu_pm_get_sync(struct etnaviv_gpu *gpu) +{ + return pm_runtime_get_sync(gpu->dev); +} + +void etnaviv_gpu_pm_put(struct etnaviv_gpu *gpu) +{ + pm_runtime_mark_last_busy(gpu->dev); + pm_runtime_put_autosuspend(gpu->dev); +} + +/* add bo's to gpu's ring, and kick gpu: */ +int etnaviv_gpu_submit(struct etnaviv_gpu *gpu, + struct etnaviv_gem_submit *submit, struct etnaviv_cmdbuf *cmdbuf) +{ + struct fence *fence; + unsigned int event, i; + int ret; + + ret = etnaviv_gpu_pm_get_sync(gpu); + if (ret < 0) + return ret; + + mutex_lock(&gpu->lock); + + /* + * TODO + * + * - flush + * - data endian + * - prefetch + * + */ + + event = event_alloc(gpu); + if (unlikely(event == ~0U)) { + DRM_ERROR("no free event\n"); + ret = -EBUSY; + goto out_unlock; + } + + fence = etnaviv_gpu_fence_alloc(gpu); + if (!fence) { + event_free(gpu, event); + ret = -ENOMEM; + goto out_unlock; + } + + gpu->event[event].fence = fence; + submit->fence = fence->seqno; + gpu->active_fence = submit->fence; + + if (gpu->lastctx != cmdbuf->ctx) { + gpu->mmu->need_flush = true; + gpu->switch_context = true; + gpu->lastctx = cmdbuf->ctx; + } + + etnaviv_buffer_queue(gpu, event, cmdbuf); + + cmdbuf->fence = fence; + list_add_tail(&cmdbuf->node, &gpu->active_cmd_list); + + /* We're committed to adding this command buffer, hold a PM reference */ + pm_runtime_get_noresume(gpu->dev); + + for (i = 0; i < submit->nr_bos; i++) { + struct etnaviv_gem_object *etnaviv_obj = submit->bos[i].obj; + u32 iova; + + /* Each cmdbuf takes a refcount on the iova */ + etnaviv_gem_get_iova(gpu, &etnaviv_obj->base, &iova); + cmdbuf->bo[i] = etnaviv_obj; + atomic_inc(&etnaviv_obj->gpu_active); + + if (submit->bos[i].flags & ETNA_SUBMIT_BO_WRITE) + reservation_object_add_excl_fence(etnaviv_obj->resv, + fence); + else + reservation_object_add_shared_fence(etnaviv_obj->resv, + fence); + } + cmdbuf->nr_bos = submit->nr_bos; + hangcheck_timer_reset(gpu); + ret = 0; + +out_unlock: + mutex_unlock(&gpu->lock); + + etnaviv_gpu_pm_put(gpu); + + return ret; +} + +/* + * Init/Cleanup: + */ +static irqreturn_t irq_handler(int irq, void *data) +{ + struct etnaviv_gpu *gpu = data; + irqreturn_t ret = IRQ_NONE; + + u32 intr = gpu_read(gpu, VIVS_HI_INTR_ACKNOWLEDGE); + + if (intr != 0) { + int event; + + pm_runtime_mark_last_busy(gpu->dev); + + dev_dbg(gpu->dev, "intr 0x%08x\n", intr); + + if (intr & VIVS_HI_INTR_ACKNOWLEDGE_AXI_BUS_ERROR) { + dev_err(gpu->dev, "AXI bus error\n"); + intr &= ~VIVS_HI_INTR_ACKNOWLEDGE_AXI_BUS_ERROR; + } + + while ((event = ffs(intr)) != 0) { + struct fence *fence; + + event -= 1; + + intr &= ~(1 << event); + + dev_dbg(gpu->dev, "event %u\n", event); + + fence = gpu->event[event].fence; + gpu->event[event].fence = NULL; + fence_signal(fence); + + /* + * Events can be processed out of order. Eg, + * - allocate and queue event 0 + * - allocate event 1 + * - event 0 completes, we process it + * - allocate and queue event 0 + * - event 1 and event 0 complete + * we can end up processing event 0 first, then 1. + */ + if (fence_after(fence->seqno, gpu->completed_fence)) + gpu->completed_fence = fence->seqno; + + event_free(gpu, event); + + /* + * We need to balance the runtime PM count caused by + * each submission. Upon submission, we increment + * the runtime PM counter, and allocate one event. + * So here, we put the runtime PM count for each + * completed event. + */ + pm_runtime_put_autosuspend(gpu->dev); + } + + /* Retire the buffer objects in a work */ + etnaviv_queue_work(gpu->drm, &gpu->retire_work); + + ret = IRQ_HANDLED; + } + + return ret; +} + +static int etnaviv_gpu_clk_enable(struct etnaviv_gpu *gpu) +{ + int ret; + + ret = enable_clk(gpu); + if (ret) + return ret; + + ret = enable_axi(gpu); + if (ret) { + disable_clk(gpu); + return ret; + } + + return 0; +} + +static int etnaviv_gpu_clk_disable(struct etnaviv_gpu *gpu) +{ + int ret; + + ret = disable_axi(gpu); + if (ret) + return ret; + + ret = disable_clk(gpu); + if (ret) + return ret; + + return 0; +} + +static int etnaviv_gpu_hw_suspend(struct etnaviv_gpu *gpu) +{ + if (gpu->buffer) { + unsigned long timeout; + + /* Replace the last WAIT with END */ + etnaviv_buffer_end(gpu); + + /* + * We know that only the FE is busy here, this should + * happen quickly (as the WAIT is only 200 cycles). If + * we fail, just warn and continue. + */ + timeout = jiffies + msecs_to_jiffies(100); + do { + u32 idle = gpu_read(gpu, VIVS_HI_IDLE_STATE); + + if ((idle & gpu->idle_mask) == gpu->idle_mask) + break; + + if (time_is_before_jiffies(timeout)) { + dev_warn(gpu->dev, + "timed out waiting for idle: idle=0x%x\n", + idle); + break; + } + + udelay(5); + } while (1); + } + + return etnaviv_gpu_clk_disable(gpu); +} + +#ifdef CONFIG_PM +static int etnaviv_gpu_hw_resume(struct etnaviv_gpu *gpu) +{ + u32 clock; + int ret; + + ret = mutex_lock_killable(&gpu->lock); + if (ret) + return ret; + + clock = VIVS_HI_CLOCK_CONTROL_DISABLE_DEBUG_REGISTERS | + VIVS_HI_CLOCK_CONTROL_FSCALE_VAL(0x40); + + etnaviv_gpu_load_clock(gpu, clock); + etnaviv_gpu_hw_init(gpu); + + gpu->switch_context = true; + + mutex_unlock(&gpu->lock); + + return 0; +} +#endif + +static int etnaviv_gpu_bind(struct device *dev, struct device *master, + void *data) +{ + struct drm_device *drm = data; + struct etnaviv_drm_private *priv = drm->dev_private; + struct etnaviv_gpu *gpu = dev_get_drvdata(dev); + int ret; + +#ifdef CONFIG_PM + ret = pm_runtime_get_sync(gpu->dev); +#else + ret = etnaviv_gpu_clk_enable(gpu); +#endif + if (ret < 0) + return ret; + + gpu->drm = drm; + gpu->fence_context = fence_context_alloc(1); + spin_lock_init(&gpu->fence_spinlock); + + INIT_LIST_HEAD(&gpu->active_cmd_list); + INIT_WORK(&gpu->retire_work, retire_worker); + INIT_WORK(&gpu->recover_work, recover_worker); + init_waitqueue_head(&gpu->fence_event); + + setup_timer(&gpu->hangcheck_timer, hangcheck_handler, + (unsigned long)gpu); + + priv->gpu[priv->num_gpus++] = gpu; + + pm_runtime_mark_last_busy(gpu->dev); + pm_runtime_put_autosuspend(gpu->dev); + + return 0; +} + +static void etnaviv_gpu_unbind(struct device *dev, struct device *master, + void *data) +{ + struct etnaviv_gpu *gpu = dev_get_drvdata(dev); + + DBG("%s", dev_name(gpu->dev)); + + hangcheck_disable(gpu); + +#ifdef CONFIG_PM + pm_runtime_get_sync(gpu->dev); + pm_runtime_put_sync_suspend(gpu->dev); +#else + etnaviv_gpu_hw_suspend(gpu); +#endif + + if (gpu->buffer) { + etnaviv_gpu_cmdbuf_free(gpu->buffer); + gpu->buffer = NULL; + } + + if (gpu->mmu) { + etnaviv_iommu_destroy(gpu->mmu); + gpu->mmu = NULL; + } + + gpu->drm = NULL; +} + +static const struct component_ops gpu_ops = { + .bind = etnaviv_gpu_bind, + .unbind = etnaviv_gpu_unbind, +}; + +static const struct of_device_id etnaviv_gpu_match[] = { + { + .compatible = "vivante,gc" + }, + { /* sentinel */ } +}; + +static int etnaviv_gpu_platform_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct etnaviv_gpu *gpu; + int err = 0; + + gpu = devm_kzalloc(dev, sizeof(*gpu), GFP_KERNEL); + if (!gpu) + return -ENOMEM; + + gpu->dev = &pdev->dev; + mutex_init(&gpu->lock); + + /* + * Set the GPU base address to the start of physical memory. This + * ensures that if we have up to 2GB, the v1 MMU can address the + * highest memory. This is important as command buffers may be + * allocated outside of this limit. + */ + gpu->memory_base = PHYS_OFFSET; + + /* Map registers: */ + gpu->mmio = etnaviv_ioremap(pdev, NULL, dev_name(gpu->dev)); + if (IS_ERR(gpu->mmio)) + return PTR_ERR(gpu->mmio); + + /* Get Interrupt: */ + gpu->irq = platform_get_irq(pdev, 0); + if (gpu->irq < 0) { + err = gpu->irq; + dev_err(dev, "failed to get irq: %d\n", err); + goto fail; + } + + err = devm_request_irq(&pdev->dev, gpu->irq, irq_handler, 0, + dev_name(gpu->dev), gpu); + if (err) { + dev_err(dev, "failed to request IRQ%u: %d\n", gpu->irq, err); + goto fail; + } + + /* Get Clocks: */ + gpu->clk_bus = devm_clk_get(&pdev->dev, "bus"); + DBG("clk_bus: %p", gpu->clk_bus); + if (IS_ERR(gpu->clk_bus)) + gpu->clk_bus = NULL; + + gpu->clk_core = devm_clk_get(&pdev->dev, "core"); + DBG("clk_core: %p", gpu->clk_core); + if (IS_ERR(gpu->clk_core)) + gpu->clk_core = NULL; + + gpu->clk_shader = devm_clk_get(&pdev->dev, "shader"); + DBG("clk_shader: %p", gpu->clk_shader); + if (IS_ERR(gpu->clk_shader)) + gpu->clk_shader = NULL; + + /* TODO: figure out max mapped size */ + dev_set_drvdata(dev, gpu); + + /* + * We treat the device as initially suspended. The runtime PM + * autosuspend delay is rather arbitary: no measurements have + * yet been performed to determine an appropriate value. + */ + pm_runtime_use_autosuspend(gpu->dev); + pm_runtime_set_autosuspend_delay(gpu->dev, 200); + pm_runtime_enable(gpu->dev); + + err = component_add(&pdev->dev, &gpu_ops); + if (err < 0) { + dev_err(&pdev->dev, "failed to register component: %d\n", err); + goto fail; + } + + return 0; + +fail: + return err; +} + +static int etnaviv_gpu_platform_remove(struct platform_device *pdev) +{ + component_del(&pdev->dev, &gpu_ops); + pm_runtime_disable(&pdev->dev); + return 0; +} + +#ifdef CONFIG_PM +static int etnaviv_gpu_rpm_suspend(struct device *dev) +{ + struct etnaviv_gpu *gpu = dev_get_drvdata(dev); + u32 idle, mask; + + /* If we have outstanding fences, we're not idle */ + if (gpu->completed_fence != gpu->active_fence) + return -EBUSY; + + /* Check whether the hardware (except FE) is idle */ + mask = gpu->idle_mask & ~VIVS_HI_IDLE_STATE_FE; + idle = gpu_read(gpu, VIVS_HI_IDLE_STATE) & mask; + if (idle != mask) + return -EBUSY; + + return etnaviv_gpu_hw_suspend(gpu); +} + +static int etnaviv_gpu_rpm_resume(struct device *dev) +{ + struct etnaviv_gpu *gpu = dev_get_drvdata(dev); + int ret; + + ret = etnaviv_gpu_clk_enable(gpu); + if (ret) + return ret; + + /* Re-initialise the basic hardware state */ + if (gpu->drm && gpu->buffer) { + ret = etnaviv_gpu_hw_resume(gpu); + if (ret) { + etnaviv_gpu_clk_disable(gpu); + return ret; + } + } + + return 0; +} +#endif + +static const struct dev_pm_ops etnaviv_gpu_pm_ops = { + SET_RUNTIME_PM_OPS(etnaviv_gpu_rpm_suspend, etnaviv_gpu_rpm_resume, + NULL) +}; + +struct platform_driver etnaviv_gpu_driver = { + .driver = { + .name = "etnaviv-gpu", + .owner = THIS_MODULE, + .pm = &etnaviv_gpu_pm_ops, + .of_match_table = etnaviv_gpu_match, + }, + .probe = etnaviv_gpu_platform_probe, + .remove = etnaviv_gpu_platform_remove, + .id_table = gpu_ids, +}; diff --git b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h new file mode 100644 index 0000000..f233ac4 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h @@ -0,0 +1,218 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ETNAVIV_GPU_H__ +#define __ETNAVIV_GPU_H__ + +#include +#include + +#include "etnaviv_drv.h" + +struct etnaviv_gem_submit; + +struct etnaviv_chip_identity { + /* Chip model. */ + u32 model; + + /* Revision value.*/ + u32 revision; + + /* Supported feature fields. */ + u32 features; + + /* Supported minor feature fields. */ + u32 minor_features0; + + /* Supported minor feature 1 fields. */ + u32 minor_features1; + + /* Supported minor feature 2 fields. */ + u32 minor_features2; + + /* Supported minor feature 3 fields. */ + u32 minor_features3; + + /* Supported minor feature 4 fields. */ + u32 minor_features4; + + /* Supported minor feature 5 fields. */ + u32 minor_features5; + + /* Number of streams supported. */ + u32 stream_count; + + /* Total number of temporary registers per thread. */ + u32 register_max; + + /* Maximum number of threads. */ + u32 thread_count; + + /* Number of shader cores. */ + u32 shader_core_count; + + /* Size of the vertex cache. */ + u32 vertex_cache_size; + + /* Number of entries in the vertex output buffer. */ + u32 vertex_output_buffer_size; + + /* Number of pixel pipes. */ + u32 pixel_pipes; + + /* Number of instructions. */ + u32 instruction_count; + + /* Number of constants. */ + u32 num_constants; + + /* Buffer size */ + u32 buffer_size; + + /* Number of varyings */ + u8 varyings_count; +}; + +struct etnaviv_event { + bool used; + struct fence *fence; +}; + +struct etnaviv_cmdbuf; + +struct etnaviv_gpu { + struct drm_device *drm; + struct device *dev; + struct mutex lock; + struct etnaviv_chip_identity identity; + struct etnaviv_file_private *lastctx; + bool switch_context; + + /* 'ring'-buffer: */ + struct etnaviv_cmdbuf *buffer; + + /* bus base address of memory */ + u32 memory_base; + + /* event management: */ + struct etnaviv_event event[30]; + struct completion event_free; + spinlock_t event_spinlock; + + /* list of currently in-flight command buffers */ + struct list_head active_cmd_list; + + u32 idle_mask; + + /* Fencing support */ + u32 next_fence; + u32 active_fence; + u32 completed_fence; + u32 retired_fence; + wait_queue_head_t fence_event; + unsigned int fence_context; + spinlock_t fence_spinlock; + + /* worker for handling active-list retiring: */ + struct work_struct retire_work; + + void __iomem *mmio; + int irq; + + struct etnaviv_iommu *mmu; + + /* Power Control: */ + struct clk *clk_bus; + struct clk *clk_core; + struct clk *clk_shader; + + /* Hang Detction: */ +#define DRM_ETNAVIV_HANGCHECK_PERIOD 500 /* in ms */ +#define DRM_ETNAVIV_HANGCHECK_JIFFIES msecs_to_jiffies(DRM_ETNAVIV_HANGCHECK_PERIOD) + struct timer_list hangcheck_timer; + u32 hangcheck_fence; + u32 hangcheck_dma_addr; + struct work_struct recover_work; +}; + +struct etnaviv_cmdbuf { + /* device this cmdbuf is allocated for */ + struct etnaviv_gpu *gpu; + /* user context key, must be unique between all active users */ + struct etnaviv_file_private *ctx; + /* cmdbuf properties */ + void *vaddr; + dma_addr_t paddr; + u32 size; + u32 user_size; + /* fence after which this buffer is to be disposed */ + struct fence *fence; + /* target exec state */ + u32 exec_state; + /* per GPU in-flight list */ + struct list_head node; + /* BOs attached to this command buffer */ + unsigned int nr_bos; + struct etnaviv_gem_object *bo[0]; +}; + +static inline void gpu_write(struct etnaviv_gpu *gpu, u32 reg, u32 data) +{ + etnaviv_writel(data, gpu->mmio + reg); +} + +static inline u32 gpu_read(struct etnaviv_gpu *gpu, u32 reg) +{ + return etnaviv_readl(gpu->mmio + reg); +} + +static inline bool fence_completed(struct etnaviv_gpu *gpu, u32 fence) +{ + return fence_after_eq(gpu->completed_fence, fence); +} + +static inline bool fence_retired(struct etnaviv_gpu *gpu, u32 fence) +{ + return fence_after_eq(gpu->retired_fence, fence); +} + +int etnaviv_gpu_get_param(struct etnaviv_gpu *gpu, u32 param, u64 *value); + +int etnaviv_gpu_init(struct etnaviv_gpu *gpu); + +#ifdef CONFIG_DEBUG_FS +int etnaviv_gpu_debugfs(struct etnaviv_gpu *gpu, struct seq_file *m); +#endif + +int etnaviv_gpu_fence_sync_obj(struct etnaviv_gem_object *etnaviv_obj, + unsigned int context, bool exclusive); + +void etnaviv_gpu_retire(struct etnaviv_gpu *gpu); +int etnaviv_gpu_wait_fence_interruptible(struct etnaviv_gpu *gpu, + u32 fence, struct timespec *timeout); +int etnaviv_gpu_wait_obj_inactive(struct etnaviv_gpu *gpu, + struct etnaviv_gem_object *etnaviv_obj, struct timespec *timeout); +int etnaviv_gpu_submit(struct etnaviv_gpu *gpu, + struct etnaviv_gem_submit *submit, struct etnaviv_cmdbuf *cmdbuf); +struct etnaviv_cmdbuf *etnaviv_gpu_cmdbuf_new(struct etnaviv_gpu *gpu, + u32 size, size_t nr_bos); +void etnaviv_gpu_cmdbuf_free(struct etnaviv_cmdbuf *cmdbuf); +int etnaviv_gpu_pm_get_sync(struct etnaviv_gpu *gpu); +void etnaviv_gpu_pm_put(struct etnaviv_gpu *gpu); + +extern struct platform_driver etnaviv_gpu_driver; + +#endif /* __ETNAVIV_GPU_H__ */ diff --git b/drivers/gpu/drm/etnaviv/etnaviv_iommu.c b/drivers/gpu/drm/etnaviv/etnaviv_iommu.c new file mode 100644 index 0000000..522cfd4 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_iommu.c @@ -0,0 +1,240 @@ +/* + * Copyright (C) 2014 Christian Gmeiner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include + +#include "etnaviv_gpu.h" +#include "etnaviv_mmu.h" +#include "etnaviv_iommu.h" +#include "state_hi.xml.h" + +#define PT_SIZE SZ_2M +#define PT_ENTRIES (PT_SIZE / sizeof(u32)) + +#define GPU_MEM_START 0x80000000 + +struct etnaviv_iommu_domain_pgtable { + u32 *pgtable; + dma_addr_t paddr; +}; + +struct etnaviv_iommu_domain { + struct iommu_domain domain; + struct device *dev; + void *bad_page_cpu; + dma_addr_t bad_page_dma; + struct etnaviv_iommu_domain_pgtable pgtable; + spinlock_t map_lock; +}; + +static struct etnaviv_iommu_domain *to_etnaviv_domain(struct iommu_domain *domain) +{ + return container_of(domain, struct etnaviv_iommu_domain, domain); +} + +static int pgtable_alloc(struct etnaviv_iommu_domain_pgtable *pgtable, + size_t size) +{ + pgtable->pgtable = dma_alloc_coherent(NULL, size, &pgtable->paddr, GFP_KERNEL); + if (!pgtable->pgtable) + return -ENOMEM; + + return 0; +} + +static void pgtable_free(struct etnaviv_iommu_domain_pgtable *pgtable, + size_t size) +{ + dma_free_coherent(NULL, size, pgtable->pgtable, pgtable->paddr); +} + +static u32 pgtable_read(struct etnaviv_iommu_domain_pgtable *pgtable, + unsigned long iova) +{ + /* calcuate index into page table */ + unsigned int index = (iova - GPU_MEM_START) / SZ_4K; + phys_addr_t paddr; + + paddr = pgtable->pgtable[index]; + + return paddr; +} + +static void pgtable_write(struct etnaviv_iommu_domain_pgtable *pgtable, + unsigned long iova, phys_addr_t paddr) +{ + /* calcuate index into page table */ + unsigned int index = (iova - GPU_MEM_START) / SZ_4K; + + pgtable->pgtable[index] = paddr; +} + +static int __etnaviv_iommu_init(struct etnaviv_iommu_domain *etnaviv_domain) +{ + u32 *p; + int ret, i; + + etnaviv_domain->bad_page_cpu = dma_alloc_coherent(etnaviv_domain->dev, + SZ_4K, + &etnaviv_domain->bad_page_dma, + GFP_KERNEL); + if (!etnaviv_domain->bad_page_cpu) + return -ENOMEM; + + p = etnaviv_domain->bad_page_cpu; + for (i = 0; i < SZ_4K / 4; i++) + *p++ = 0xdead55aa; + + ret = pgtable_alloc(&etnaviv_domain->pgtable, PT_SIZE); + if (ret < 0) { + dma_free_coherent(etnaviv_domain->dev, SZ_4K, + etnaviv_domain->bad_page_cpu, + etnaviv_domain->bad_page_dma); + return ret; + } + + for (i = 0; i < PT_ENTRIES; i++) + etnaviv_domain->pgtable.pgtable[i] = + etnaviv_domain->bad_page_dma; + + spin_lock_init(&etnaviv_domain->map_lock); + + return 0; +} + +static void etnaviv_domain_free(struct iommu_domain *domain) +{ + struct etnaviv_iommu_domain *etnaviv_domain = to_etnaviv_domain(domain); + + pgtable_free(&etnaviv_domain->pgtable, PT_SIZE); + + dma_free_coherent(etnaviv_domain->dev, SZ_4K, + etnaviv_domain->bad_page_cpu, + etnaviv_domain->bad_page_dma); + + kfree(etnaviv_domain); +} + +static int etnaviv_iommuv1_map(struct iommu_domain *domain, unsigned long iova, + phys_addr_t paddr, size_t size, int prot) +{ + struct etnaviv_iommu_domain *etnaviv_domain = to_etnaviv_domain(domain); + + if (size != SZ_4K) + return -EINVAL; + + spin_lock(&etnaviv_domain->map_lock); + pgtable_write(&etnaviv_domain->pgtable, iova, paddr); + spin_unlock(&etnaviv_domain->map_lock); + + return 0; +} + +static size_t etnaviv_iommuv1_unmap(struct iommu_domain *domain, + unsigned long iova, size_t size) +{ + struct etnaviv_iommu_domain *etnaviv_domain = to_etnaviv_domain(domain); + + if (size != SZ_4K) + return -EINVAL; + + spin_lock(&etnaviv_domain->map_lock); + pgtable_write(&etnaviv_domain->pgtable, iova, + etnaviv_domain->bad_page_dma); + spin_unlock(&etnaviv_domain->map_lock); + + return SZ_4K; +} + +static phys_addr_t etnaviv_iommu_iova_to_phys(struct iommu_domain *domain, + dma_addr_t iova) +{ + struct etnaviv_iommu_domain *etnaviv_domain = to_etnaviv_domain(domain); + + return pgtable_read(&etnaviv_domain->pgtable, iova); +} + +static size_t etnaviv_iommuv1_dump_size(struct iommu_domain *domain) +{ + return PT_SIZE; +} + +static void etnaviv_iommuv1_dump(struct iommu_domain *domain, void *buf) +{ + struct etnaviv_iommu_domain *etnaviv_domain = to_etnaviv_domain(domain); + + memcpy(buf, etnaviv_domain->pgtable.pgtable, PT_SIZE); +} + +static struct etnaviv_iommu_ops etnaviv_iommu_ops = { + .ops = { + .domain_free = etnaviv_domain_free, + .map = etnaviv_iommuv1_map, + .unmap = etnaviv_iommuv1_unmap, + .iova_to_phys = etnaviv_iommu_iova_to_phys, + .pgsize_bitmap = SZ_4K, + }, + .dump_size = etnaviv_iommuv1_dump_size, + .dump = etnaviv_iommuv1_dump, +}; + +void etnaviv_iommu_domain_restore(struct etnaviv_gpu *gpu, + struct iommu_domain *domain) +{ + struct etnaviv_iommu_domain *etnaviv_domain = to_etnaviv_domain(domain); + u32 pgtable; + + /* set page table address in MC */ + pgtable = (u32)etnaviv_domain->pgtable.paddr; + + gpu_write(gpu, VIVS_MC_MMU_FE_PAGE_TABLE, pgtable); + gpu_write(gpu, VIVS_MC_MMU_TX_PAGE_TABLE, pgtable); + gpu_write(gpu, VIVS_MC_MMU_PE_PAGE_TABLE, pgtable); + gpu_write(gpu, VIVS_MC_MMU_PEZ_PAGE_TABLE, pgtable); + gpu_write(gpu, VIVS_MC_MMU_RA_PAGE_TABLE, pgtable); +} + +struct iommu_domain *etnaviv_iommu_domain_alloc(struct etnaviv_gpu *gpu) +{ + struct etnaviv_iommu_domain *etnaviv_domain; + int ret; + + etnaviv_domain = kzalloc(sizeof(*etnaviv_domain), GFP_KERNEL); + if (!etnaviv_domain) + return NULL; + + etnaviv_domain->dev = gpu->dev; + + etnaviv_domain->domain.type = __IOMMU_DOMAIN_PAGING; + etnaviv_domain->domain.ops = &etnaviv_iommu_ops.ops; + etnaviv_domain->domain.geometry.aperture_start = GPU_MEM_START; + etnaviv_domain->domain.geometry.aperture_end = GPU_MEM_START + PT_ENTRIES * SZ_4K - 1; + + ret = __etnaviv_iommu_init(etnaviv_domain); + if (ret) + goto out_free; + + return &etnaviv_domain->domain; + +out_free: + kfree(etnaviv_domain); + return NULL; +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_iommu.h b/drivers/gpu/drm/etnaviv/etnaviv_iommu.h new file mode 100644 index 0000000..cf45503 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_iommu.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2014 Christian Gmeiner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ETNAVIV_IOMMU_H__ +#define __ETNAVIV_IOMMU_H__ + +#include +struct etnaviv_gpu; + +struct iommu_domain *etnaviv_iommu_domain_alloc(struct etnaviv_gpu *gpu); +void etnaviv_iommu_domain_restore(struct etnaviv_gpu *gpu, + struct iommu_domain *domain); +struct iommu_domain *etnaviv_iommu_v2_domain_alloc(struct etnaviv_gpu *gpu); + +#endif /* __ETNAVIV_IOMMU_H__ */ diff --git b/drivers/gpu/drm/etnaviv/etnaviv_iommu_v2.c b/drivers/gpu/drm/etnaviv/etnaviv_iommu_v2.c new file mode 100644 index 0000000..fbb4aed --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_iommu_v2.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2014 Christian Gmeiner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include + +#include "etnaviv_gpu.h" +#include "etnaviv_iommu.h" +#include "state_hi.xml.h" + + +struct iommu_domain *etnaviv_iommu_v2_domain_alloc(struct etnaviv_gpu *gpu) +{ + /* TODO */ + return NULL; +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_iommu_v2.h b/drivers/gpu/drm/etnaviv/etnaviv_iommu_v2.h new file mode 100644 index 0000000..603ea41 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_iommu_v2.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Christian Gmeiner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ETNAVIV_IOMMU_V2_H__ +#define __ETNAVIV_IOMMU_V2_H__ + +#include +struct etnaviv_gpu; + +struct iommu_domain *etnaviv_iommu_v2_domain_alloc(struct etnaviv_gpu *gpu); + +#endif /* __ETNAVIV_IOMMU_V2_H__ */ diff --git b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c new file mode 100644 index 0000000..6743bc6 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c @@ -0,0 +1,299 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "etnaviv_drv.h" +#include "etnaviv_gem.h" +#include "etnaviv_gpu.h" +#include "etnaviv_mmu.h" + +static int etnaviv_fault_handler(struct iommu_domain *iommu, struct device *dev, + unsigned long iova, int flags, void *arg) +{ + DBG("*** fault: iova=%08lx, flags=%d", iova, flags); + return 0; +} + +int etnaviv_iommu_map(struct etnaviv_iommu *iommu, u32 iova, + struct sg_table *sgt, unsigned len, int prot) +{ + struct iommu_domain *domain = iommu->domain; + struct scatterlist *sg; + unsigned int da = iova; + unsigned int i, j; + int ret; + + if (!domain || !sgt) + return -EINVAL; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + u32 pa = sg_dma_address(sg) - sg->offset; + size_t bytes = sg_dma_len(sg) + sg->offset; + + VERB("map[%d]: %08x %08x(%zx)", i, iova, pa, bytes); + + ret = iommu_map(domain, da, pa, bytes, prot); + if (ret) + goto fail; + + da += bytes; + } + + return 0; + +fail: + da = iova; + + for_each_sg(sgt->sgl, sg, i, j) { + size_t bytes = sg_dma_len(sg) + sg->offset; + + iommu_unmap(domain, da, bytes); + da += bytes; + } + return ret; +} + +int etnaviv_iommu_unmap(struct etnaviv_iommu *iommu, u32 iova, + struct sg_table *sgt, unsigned len) +{ + struct iommu_domain *domain = iommu->domain; + struct scatterlist *sg; + unsigned int da = iova; + int i; + + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes = sg_dma_len(sg) + sg->offset; + size_t unmapped; + + unmapped = iommu_unmap(domain, da, bytes); + if (unmapped < bytes) + return unmapped; + + VERB("unmap[%d]: %08x(%zx)", i, iova, bytes); + + BUG_ON(!PAGE_ALIGNED(bytes)); + + da += bytes; + } + + return 0; +} + +static void etnaviv_iommu_remove_mapping(struct etnaviv_iommu *mmu, + struct etnaviv_vram_mapping *mapping) +{ + struct etnaviv_gem_object *etnaviv_obj = mapping->object; + + etnaviv_iommu_unmap(mmu, mapping->vram_node.start, + etnaviv_obj->sgt, etnaviv_obj->base.size); + drm_mm_remove_node(&mapping->vram_node); +} + +int etnaviv_iommu_map_gem(struct etnaviv_iommu *mmu, + struct etnaviv_gem_object *etnaviv_obj, u32 memory_base, + struct etnaviv_vram_mapping *mapping) +{ + struct etnaviv_vram_mapping *free = NULL; + struct sg_table *sgt = etnaviv_obj->sgt; + struct drm_mm_node *node; + int ret; + + lockdep_assert_held(&etnaviv_obj->lock); + + mutex_lock(&mmu->lock); + + /* v1 MMU can optimize single entry (contiguous) scatterlists */ + if (sgt->nents == 1 && !(etnaviv_obj->flags & ETNA_BO_FORCE_MMU)) { + u32 iova; + + iova = sg_dma_address(sgt->sgl) - memory_base; + if (iova < 0x80000000 - sg_dma_len(sgt->sgl)) { + mapping->iova = iova; + list_add_tail(&mapping->mmu_node, &mmu->mappings); + mutex_unlock(&mmu->lock); + return 0; + } + } + + node = &mapping->vram_node; + while (1) { + struct etnaviv_vram_mapping *m, *n; + struct list_head list; + bool found; + + ret = drm_mm_insert_node_in_range(&mmu->mm, node, + etnaviv_obj->base.size, 0, mmu->last_iova, ~0UL, + DRM_MM_SEARCH_DEFAULT); + + if (ret != -ENOSPC) + break; + + /* + * If we did not search from the start of the MMU region, + * try again in case there are free slots. + */ + if (mmu->last_iova) { + mmu->last_iova = 0; + mmu->need_flush = true; + continue; + } + + /* Try to retire some entries */ + drm_mm_init_scan(&mmu->mm, etnaviv_obj->base.size, 0, 0); + + found = 0; + INIT_LIST_HEAD(&list); + list_for_each_entry(free, &mmu->mappings, mmu_node) { + /* If this vram node has not been used, skip this. */ + if (!free->vram_node.mm) + continue; + + /* + * If the iova is pinned, then it's in-use, + * so we must keep its mapping. + */ + if (free->use) + continue; + + list_add(&free->scan_node, &list); + if (drm_mm_scan_add_block(&free->vram_node)) { + found = true; + break; + } + } + + if (!found) { + /* Nothing found, clean up and fail */ + list_for_each_entry_safe(m, n, &list, scan_node) + BUG_ON(drm_mm_scan_remove_block(&m->vram_node)); + break; + } + + /* + * drm_mm does not allow any other operations while + * scanning, so we have to remove all blocks first. + * If drm_mm_scan_remove_block() returns false, we + * can leave the block pinned. + */ + list_for_each_entry_safe(m, n, &list, scan_node) + if (!drm_mm_scan_remove_block(&m->vram_node)) + list_del_init(&m->scan_node); + + /* + * Unmap the blocks which need to be reaped from the MMU. + * Clear the mmu pointer to prevent the get_iova finding + * this mapping. + */ + list_for_each_entry_safe(m, n, &list, scan_node) { + etnaviv_iommu_remove_mapping(mmu, m); + m->mmu = NULL; + list_del_init(&m->mmu_node); + list_del_init(&m->scan_node); + } + + /* + * We removed enough mappings so that the new allocation will + * succeed. Ensure that the MMU will be flushed before the + * associated commit requesting this mapping, and retry the + * allocation one more time. + */ + mmu->need_flush = true; + } + + if (ret < 0) { + mutex_unlock(&mmu->lock); + return ret; + } + + mmu->last_iova = node->start + etnaviv_obj->base.size; + mapping->iova = node->start; + ret = etnaviv_iommu_map(mmu, node->start, sgt, etnaviv_obj->base.size, + IOMMU_READ | IOMMU_WRITE); + + if (ret < 0) { + drm_mm_remove_node(node); + mutex_unlock(&mmu->lock); + return ret; + } + + list_add_tail(&mapping->mmu_node, &mmu->mappings); + mutex_unlock(&mmu->lock); + + return ret; +} + +void etnaviv_iommu_unmap_gem(struct etnaviv_iommu *mmu, + struct etnaviv_vram_mapping *mapping) +{ + WARN_ON(mapping->use); + + mutex_lock(&mmu->lock); + + /* If the vram node is on the mm, unmap and remove the node */ + if (mapping->vram_node.mm == &mmu->mm) + etnaviv_iommu_remove_mapping(mmu, mapping); + + list_del(&mapping->mmu_node); + mutex_unlock(&mmu->lock); +} + +void etnaviv_iommu_destroy(struct etnaviv_iommu *mmu) +{ + drm_mm_takedown(&mmu->mm); + iommu_domain_free(mmu->domain); + kfree(mmu); +} + +struct etnaviv_iommu *etnaviv_iommu_new(struct etnaviv_gpu *gpu, + struct iommu_domain *domain, enum etnaviv_iommu_version version) +{ + struct etnaviv_iommu *mmu; + + mmu = kzalloc(sizeof(*mmu), GFP_KERNEL); + if (!mmu) + return ERR_PTR(-ENOMEM); + + mmu->domain = domain; + mmu->gpu = gpu; + mmu->version = version; + mutex_init(&mmu->lock); + INIT_LIST_HEAD(&mmu->mappings); + + drm_mm_init(&mmu->mm, domain->geometry.aperture_start, + domain->geometry.aperture_end - + domain->geometry.aperture_start + 1); + + iommu_set_fault_handler(domain, etnaviv_fault_handler, gpu->dev); + + return mmu; +} + +size_t etnaviv_iommu_dump_size(struct etnaviv_iommu *iommu) +{ + struct etnaviv_iommu_ops *ops; + + ops = container_of(iommu->domain->ops, struct etnaviv_iommu_ops, ops); + + return ops->dump_size(iommu->domain); +} + +void etnaviv_iommu_dump(struct etnaviv_iommu *iommu, void *buf) +{ + struct etnaviv_iommu_ops *ops; + + ops = container_of(iommu->domain->ops, struct etnaviv_iommu_ops, ops); + + ops->dump(iommu->domain, buf); +} diff --git b/drivers/gpu/drm/etnaviv/etnaviv_mmu.h b/drivers/gpu/drm/etnaviv/etnaviv_mmu.h new file mode 100644 index 0000000..fff215a --- /dev/null +++ b/drivers/gpu/drm/etnaviv/etnaviv_mmu.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2015 Etnaviv Project + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __ETNAVIV_MMU_H__ +#define __ETNAVIV_MMU_H__ + +#include + +enum etnaviv_iommu_version { + ETNAVIV_IOMMU_V1 = 0, + ETNAVIV_IOMMU_V2, +}; + +struct etnaviv_gpu; +struct etnaviv_vram_mapping; + +struct etnaviv_iommu_ops { + struct iommu_ops ops; + size_t (*dump_size)(struct iommu_domain *); + void (*dump)(struct iommu_domain *, void *); +}; + +struct etnaviv_iommu { + struct etnaviv_gpu *gpu; + struct iommu_domain *domain; + + enum etnaviv_iommu_version version; + + /* memory manager for GPU address area */ + struct mutex lock; + struct list_head mappings; + struct drm_mm mm; + u32 last_iova; + bool need_flush; +}; + +struct etnaviv_gem_object; + +int etnaviv_iommu_attach(struct etnaviv_iommu *iommu, const char **names, + int cnt); +int etnaviv_iommu_map(struct etnaviv_iommu *iommu, u32 iova, + struct sg_table *sgt, unsigned len, int prot); +int etnaviv_iommu_unmap(struct etnaviv_iommu *iommu, u32 iova, + struct sg_table *sgt, unsigned len); +int etnaviv_iommu_map_gem(struct etnaviv_iommu *mmu, + struct etnaviv_gem_object *etnaviv_obj, u32 memory_base, + struct etnaviv_vram_mapping *mapping); +void etnaviv_iommu_unmap_gem(struct etnaviv_iommu *mmu, + struct etnaviv_vram_mapping *mapping); +void etnaviv_iommu_destroy(struct etnaviv_iommu *iommu); + +size_t etnaviv_iommu_dump_size(struct etnaviv_iommu *iommu); +void etnaviv_iommu_dump(struct etnaviv_iommu *iommu, void *buf); + +struct etnaviv_iommu *etnaviv_iommu_new(struct etnaviv_gpu *gpu, + struct iommu_domain *domain, enum etnaviv_iommu_version version); + +#endif /* __ETNAVIV_MMU_H__ */ diff --git b/drivers/gpu/drm/etnaviv/state.xml.h b/drivers/gpu/drm/etnaviv/state.xml.h new file mode 100644 index 0000000..3682183 --- /dev/null +++ b/drivers/gpu/drm/etnaviv/state.xml.h @@ -0,0 +1,351 @@ +#ifndef STATE_XML +#define STATE_XML + +/* Autogenerated file, DO NOT EDIT manually! + +This file was generated by the rules-ng-ng headergen tool in this git repository: +http://0x04.net/cgit/index.cgi/rules-ng-ng +git clone git://0x04.net/rules-ng-ng + +The rules-ng-ng source files this header was generated from are: +- state.xml ( 18882 bytes, from 2015-03-25 11:42:32) +- common.xml ( 18437 bytes, from 2015-03-25 11:27:41) +- state_hi.xml ( 23420 bytes, from 2015-03-25 11:47:21) +- state_2d.xml ( 51549 bytes, from 2015-03-25 11:25:06) +- state_3d.xml ( 54600 bytes, from 2015-03-25 11:25:19) +- state_vg.xml ( 5973 bytes, from 2015-03-25 11:26:01) + +Copyright (C) 2015 +*/ + + +#define VARYING_COMPONENT_USE_UNUSED 0x00000000 +#define VARYING_COMPONENT_USE_USED 0x00000001 +#define VARYING_COMPONENT_USE_POINTCOORD_X 0x00000002 +#define VARYING_COMPONENT_USE_POINTCOORD_Y 0x00000003 +#define FE_VERTEX_STREAM_CONTROL_VERTEX_STRIDE__MASK 0x000000ff +#define FE_VERTEX_STREAM_CONTROL_VERTEX_STRIDE__SHIFT 0 +#define FE_VERTEX_STREAM_CONTROL_VERTEX_STRIDE(x) (((x) << FE_VERTEX_STREAM_CONTROL_VERTEX_STRIDE__SHIFT) & FE_VERTEX_STREAM_CONTROL_VERTEX_STRIDE__MASK) +#define VIVS_FE 0x00000000 + +#define VIVS_FE_VERTEX_ELEMENT_CONFIG(i0) (0x00000600 + 0x4*(i0)) +#define VIVS_FE_VERTEX_ELEMENT_CONFIG__ESIZE 0x00000004 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG__LEN 0x00000010 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE__MASK 0x0000000f +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE__SHIFT 0 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_BYTE 0x00000000 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_UNSIGNED_BYTE 0x00000001 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_SHORT 0x00000002 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_UNSIGNED_SHORT 0x00000003 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_INT 0x00000004 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_UNSIGNED_INT 0x00000005 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_FLOAT 0x00000008 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_HALF_FLOAT 0x00000009 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_FIXED 0x0000000b +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_INT_10_10_10_2 0x0000000c +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_TYPE_UNSIGNED_INT_10_10_10_2 0x0000000d +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_ENDIAN__MASK 0x00000030 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_ENDIAN__SHIFT 4 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_ENDIAN(x) (((x) << VIVS_FE_VERTEX_ELEMENT_CONFIG_ENDIAN__SHIFT) & VIVS_FE_VERTEX_ELEMENT_CONFIG_ENDIAN__MASK) +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_NONCONSECUTIVE 0x00000080 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_STREAM__MASK 0x00000700 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_STREAM__SHIFT 8 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_STREAM(x) (((x) << VIVS_FE_VERTEX_ELEMENT_CONFIG_STREAM__SHIFT) & VIVS_FE_VERTEX_ELEMENT_CONFIG_STREAM__MASK) +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_NUM__MASK 0x00003000 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_NUM__SHIFT 12 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_NUM(x) (((x) << VIVS_FE_VERTEX_ELEMENT_CONFIG_NUM__SHIFT) & VIVS_FE_VERTEX_ELEMENT_CONFIG_NUM__MASK) +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_NORMALIZE__MASK 0x0000c000 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_NORMALIZE__SHIFT 14 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_NORMALIZE_OFF 0x00000000 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_NORMALIZE_ON 0x00008000 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_START__MASK 0x00ff0000 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_START__SHIFT 16 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_START(x) (((x) << VIVS_FE_VERTEX_ELEMENT_CONFIG_START__SHIFT) & VIVS_FE_VERTEX_ELEMENT_CONFIG_START__MASK) +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_END__MASK 0xff000000 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_END__SHIFT 24 +#define VIVS_FE_VERTEX_ELEMENT_CONFIG_END(x) (((x) << VIVS_FE_VERTEX_ELEMENT_CONFIG_END__SHIFT) & VIVS_FE_VERTEX_ELEMENT_CONFIG_END__MASK) + +#define VIVS_FE_CMD_STREAM_BASE_ADDR 0x00000640 + +#define VIVS_FE_INDEX_STREAM_BASE_ADDR 0x00000644 + +#define VIVS_FE_INDEX_STREAM_CONTROL 0x00000648 +#define VIVS_FE_INDEX_STREAM_CONTROL_TYPE__MASK 0x00000003 +#define VIVS_FE_INDEX_STREAM_CONTROL_TYPE__SHIFT 0 +#define VIVS_FE_INDEX_STREAM_CONTROL_TYPE_UNSIGNED_CHAR 0x00000000 +#define VIVS_FE_INDEX_STREAM_CONTROL_TYPE_UNSIGNED_SHORT 0x00000001 +#define VIVS_FE_INDEX_STREAM_CONTROL_TYPE_UNSIGNED_INT 0x00000002 + +#define VIVS_FE_VERTEX_STREAM_BASE_ADDR 0x0000064c + +#define VIVS_FE_VERTEX_STREAM_CONTROL 0x00000650 + +#define VIVS_FE_COMMAND_ADDRESS 0x00000654 + +#define VIVS_FE_COMMAND_CONTROL 0x00000658 +#define VIVS_FE_COMMAND_CONTROL_PREFETCH__MASK 0x0000ffff +#define VIVS_FE_COMMAND_CONTROL_PREFETCH__SHIFT 0 +#define VIVS_FE_COMMAND_CONTROL_PREFETCH(x) (((x) << VIVS_FE_COMMAND_CONTROL_PREFETCH__SHIFT) & VIVS_FE_COMMAND_CONTROL_PREFETCH__MASK) +#define VIVS_FE_COMMAND_CONTROL_ENABLE 0x00010000 + +#define VIVS_FE_DMA_STATUS 0x0000065c + +#define VIVS_FE_DMA_DEBUG_STATE 0x00000660 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE__MASK 0x0000001f +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE__SHIFT 0 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_IDLE 0x00000000 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_DEC 0x00000001 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_ADR0 0x00000002 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_LOAD0 0x00000003 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_ADR1 0x00000004 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_LOAD1 0x00000005 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_3DADR 0x00000006 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_3DCMD 0x00000007 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_3DCNTL 0x00000008 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_3DIDXCNTL 0x00000009 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_INITREQDMA 0x0000000a +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_DRAWIDX 0x0000000b +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_DRAW 0x0000000c +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_2DRECT0 0x0000000d +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_2DRECT1 0x0000000e +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_2DDATA0 0x0000000f +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_2DDATA1 0x00000010 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_WAITFIFO 0x00000011 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_WAIT 0x00000012 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_LINK 0x00000013 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_END 0x00000014 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_STATE_STALL 0x00000015 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_DMA_STATE__MASK 0x00000300 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_DMA_STATE__SHIFT 8 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_DMA_STATE_IDLE 0x00000000 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_DMA_STATE_START 0x00000100 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_DMA_STATE_REQ 0x00000200 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_DMA_STATE_END 0x00000300 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_FETCH_STATE__MASK 0x00000c00 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_FETCH_STATE__SHIFT 10 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_FETCH_STATE_IDLE 0x00000000 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_FETCH_STATE_RAMVALID 0x00000400 +#define VIVS_FE_DMA_DEBUG_STATE_CMD_FETCH_STATE_VALID 0x00000800 +#define VIVS_FE_DMA_DEBUG_STATE_REQ_DMA_STATE__MASK 0x00003000 +#define VIVS_FE_DMA_DEBUG_STATE_REQ_DMA_STATE__SHIFT 12 +#define VIVS_FE_DMA_DEBUG_STATE_REQ_DMA_STATE_IDLE 0x00000000 +#define VIVS_FE_DMA_DEBUG_STATE_REQ_DMA_STATE_WAITIDX 0x00001000 +#define VIVS_FE_DMA_DEBUG_STATE_REQ_DMA_STATE_CAL 0x00002000 +#define VIVS_FE_DMA_DEBUG_STATE_CAL_STATE__MASK 0x0000c000 +#define VIVS_FE_DMA_DEBUG_STATE_CAL_STATE__SHIFT 14 +#define VIVS_FE_DMA_DEBUG_STATE_CAL_STATE_IDLE 0x00000000 +#define VIVS_FE_DMA_DEBUG_STATE_CAL_STATE_LDADR 0x00004000 +#define VIVS_FE_DMA_DEBUG_STATE_CAL_STATE_IDXCALC 0x00008000 +#define VIVS_FE_DMA_DEBUG_STATE_VE_REQ_STATE__MASK 0x00030000 +#define VIVS_FE_DMA_DEBUG_STATE_VE_REQ_STATE__SHIFT 16 +#define VIVS_FE_DMA_DEBUG_STATE_VE_REQ_STATE_IDLE 0x00000000 +#define VIVS_FE_DMA_DEBUG_STATE_VE_REQ_STATE_CKCACHE 0x00010000 +#define VIVS_FE_DMA_DEBUG_STATE_VE_REQ_STATE_MISS 0x00020000 + +#define VIVS_FE_DMA_ADDRESS 0x00000664 + +#define VIVS_FE_DMA_LOW 0x00000668 + +#define VIVS_FE_DMA_HIGH 0x0000066c + +#define VIVS_FE_AUTO_FLUSH 0x00000670 + +#define VIVS_FE_UNK00678 0x00000678 + +#define VIVS_FE_UNK0067C 0x0000067c + +#define VIVS_FE_VERTEX_STREAMS(i0) (0x00000000 + 0x4*(i0)) +#define VIVS_FE_VERTEX_STREAMS__ESIZE 0x00000004 +#define VIVS_FE_VERTEX_STREAMS__LEN 0x00000008 + +#define VIVS_FE_VERTEX_STREAMS_BASE_ADDR(i0) (0x00000680 + 0x4*(i0)) + +#define VIVS_FE_VERTEX_STREAMS_CONTROL(i0) (0x000006a0 + 0x4*(i0)) + +#define VIVS_FE_UNK00700(i0) (0x00000700 + 0x4*(i0)) +#define VIVS_FE_UNK00700__ESIZE 0x00000004 +#define VIVS_FE_UNK00700__LEN 0x00000010 + +#define VIVS_FE_UNK00740(i0) (0x00000740 + 0x4*(i0)) +#define VIVS_FE_UNK00740__ESIZE 0x00000004 +#define VIVS_FE_UNK00740__LEN 0x00000010 + +#define VIVS_FE_UNK00780(i0) (0x00000780 + 0x4*(i0)) +#define VIVS_FE_UNK00780__ESIZE 0x00000004 +#define VIVS_FE_UNK00780__LEN 0x00000010 + +#define VIVS_GL 0x00000000 + +#define VIVS_GL_PIPE_SELECT 0x00003800 +#define VIVS_GL_PIPE_SELECT_PIPE__MASK 0x00000001 +#define VIVS_GL_PIPE_SELECT_PIPE__SHIFT 0 +#define VIVS_GL_PIPE_SELECT_PIPE(x) (((x) << VIVS_GL_PIPE_SELECT_PIPE__SHIFT) & VIVS_GL_PIPE_SELECT_PIPE__MASK) + +#define VIVS_GL_EVENT 0x00003804 +#define VIVS_GL_EVENT_EVENT_ID__MASK 0x0000001f +#define VIVS_GL_EVENT_EVENT_ID__SHIFT 0 +#define VIVS_GL_EVENT_EVENT_ID(x) (((x) << VIVS_GL_EVENT_EVENT_ID__SHIFT) & VIVS_GL_EVENT_EVENT_ID__MASK) +#define VIVS_GL_EVENT_FROM_FE 0x00000020 +#define VIVS_GL_EVENT_FROM_PE 0x00000040 +#define VIVS_GL_EVENT_SOURCE__MASK 0x00001f00 +#define VIVS_GL_EVENT_SOURCE__SHIFT 8 +#define VIVS_GL_EVENT_SOURCE(x) (((x) << VIVS_GL_EVENT_SOURCE__SHIFT) & VIVS_GL_EVENT_SOURCE__MASK) + +#define VIVS_GL_SEMAPHORE_TOKEN 0x00003808 +#define VIVS_GL_SEMAPHORE_TOKEN_FROM__MASK 0x0000001f +#define VIVS_GL_SEMAPHORE_TOKEN_FROM__SHIFT 0 +#define VIVS_GL_SEMAPHORE_TOKEN_FROM(x) (((x) << VIVS_GL_SEMAPHORE_TOKEN_FROM__SHIFT) & VIVS_GL_SEMAPHORE_TOKEN_FROM__MASK) +#define VIVS_GL_SEMAPHORE_TOKEN_TO__MASK 0x00001f00 +#define VIVS_GL_SEMAPHORE_TOKEN_TO__SHIFT 8 +#define VIVS_GL_SEMAPHORE_TOKEN_TO(x) (((x) << VIVS_GL_SEMAPHORE_TOKEN_TO__SHIFT) & VIVS_GL_SEMAPHORE_TOKEN_TO__MASK) + +#define VIVS_GL_FLUSH_CACHE 0x0000380c +#define VIVS_GL_FLUSH_CACHE_DEPTH 0x00000001 +#define VIVS_GL_FLUSH_CACHE_COLOR 0x00000002 +#define VIVS_GL_FLUSH_CACHE_TEXTURE 0x00000004 +#define VIVS_GL_FLUSH_CACHE_PE2D 0x00000008 +#define VIVS_GL_FLUSH_CACHE_TEXTUREVS 0x00000010 +#define VIVS_GL_FLUSH_CACHE_SHADER_L1 0x00000020 +#define VIVS_GL_FLUSH_CACHE_SHADER_L2 0x00000040 + +#define VIVS_GL_FLUSH_MMU 0x00003810 +#define VIVS_GL_FLUSH_MMU_FLUSH_FEMMU 0x00000001 +#define VIVS_GL_FLUSH_MMU_FLUSH_UNK1 0x00000002 +#define VIVS_GL_FLUSH_MMU_FLUSH_UNK2 0x00000004 +#define VIVS_GL_FLUSH_MMU_FLUSH_PEMMU 0x00000008 +#define VIVS_GL_FLUSH_MMU_FLUSH_UNK4 0x00000010 + +#define VIVS_GL_VERTEX_ELEMENT_CONFIG 0x00003814 + +#define VIVS_GL_MULTI_SAMPLE_CONFIG 0x00003818 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_SAMPLES__MASK 0x00000003 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_SAMPLES__SHIFT 0 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_SAMPLES_NONE 0x00000000 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_SAMPLES_2X 0x00000001 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_SAMPLES_4X 0x00000002 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_SAMPLES_MASK 0x00000008 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_ENABLES__MASK 0x000000f0 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_ENABLES__SHIFT 4 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_ENABLES(x) (((x) << VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_ENABLES__SHIFT) & VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_ENABLES__MASK) +#define VIVS_GL_MULTI_SAMPLE_CONFIG_MSAA_ENABLES_MASK 0x00000100 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_UNK12__MASK 0x00007000 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_UNK12__SHIFT 12 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_UNK12(x) (((x) << VIVS_GL_MULTI_SAMPLE_CONFIG_UNK12__SHIFT) & VIVS_GL_MULTI_SAMPLE_CONFIG_UNK12__MASK) +#define VIVS_GL_MULTI_SAMPLE_CONFIG_UNK12_MASK 0x00008000 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_UNK16__MASK 0x00030000 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_UNK16__SHIFT 16 +#define VIVS_GL_MULTI_SAMPLE_CONFIG_UNK16(x) (((x) << VIVS_GL_MULTI_SAMPLE_CONFIG_UNK16__SHIFT) & VIVS_GL_MULTI_SAMPLE_CONFIG_UNK16__MASK) +#define VIVS_GL_MULTI_SAMPLE_CONFIG_UNK16_MASK 0x00080000 + +#define VIVS_GL_VARYING_TOTAL_COMPONENTS 0x0000381c +#define VIVS_GL_VARYING_TOTAL_COMPONENTS_NUM__MASK 0x000000ff +#define VIVS_GL_VARYING_TOTAL_COMPONENTS_NUM__SHIFT 0 +#define VIVS_GL_VARYING_TOTAL_COMPONENTS_NUM(x) (((x) << VIVS_GL_VARYING_TOTAL_COMPONENTS_NUM__SHIFT) & VIVS_GL_VARYING_TOTAL_COMPONENTS_NUM__MASK) + +#define VIVS_GL_VARYING_NUM_COMPONENTS 0x00003820 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR0__MASK 0x00000007 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR0__SHIFT 0 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR0(x) (((x) << VIVS_GL_VARYING_NUM_COMPONENTS_VAR0__SHIFT) & VIVS_GL_VARYING_NUM_COMPONENTS_VAR0__MASK) +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR1__MASK 0x00000070 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR1__SHIFT 4 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR1(x) (((x) << VIVS_GL_VARYING_NUM_COMPONENTS_VAR1__SHIFT) & VIVS_GL_VARYING_NUM_COMPONENTS_VAR1__MASK) +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR2__MASK 0x00000700 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR2__SHIFT 8 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR2(x) (((x) << VIVS_GL_VARYING_NUM_COMPONENTS_VAR2__SHIFT) & VIVS_GL_VARYING_NUM_COMPONENTS_VAR2__MASK) +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR3__MASK 0x00007000 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR3__SHIFT 12 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR3(x) (((x) << VIVS_GL_VARYING_NUM_COMPONENTS_VAR3__SHIFT) & VIVS_GL_VARYING_NUM_COMPONENTS_VAR3__MASK) +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR4__MASK 0x00070000 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR4__SHIFT 16 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR4(x) (((x) << VIVS_GL_VARYING_NUM_COMPONENTS_VAR4__SHIFT) & VIVS_GL_VARYING_NUM_COMPONENTS_VAR4__MASK) +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR5__MASK 0x00700000 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR5__SHIFT 20 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR5(x) (((x) << VIVS_GL_VARYING_NUM_COMPONENTS_VAR5__SHIFT) & VIVS_GL_VARYING_NUM_COMPONENTS_VAR5__MASK) +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR6__MASK 0x07000000 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR6__SHIFT 24 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR6(x) (((x) << VIVS_GL_VARYING_NUM_COMPONENTS_VAR6__SHIFT) & VIVS_GL_VARYING_NUM_COMPONENTS_VAR6__MASK) +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR7__MASK 0x70000000 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR7__SHIFT 28 +#define VIVS_GL_VARYING_NUM_COMPONENTS_VAR7(x) (((x) << VIVS_GL_VARYING_NUM_COMPONENTS_VAR7__SHIFT) & VIVS_GL_VARYING_NUM_COMPONENTS_VAR7__MASK) + +#define VIVS_GL_VARYING_COMPONENT_USE(i0) (0x00003828 + 0x4*(i0)) +#define VIVS_GL_VARYING_COMPONENT_USE__ESIZE 0x00000004 +#define VIVS_GL_VARYING_COMPONENT_USE__LEN 0x00000002 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP0__MASK 0x00000003 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP0__SHIFT 0 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP0(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP0__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP0__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP1__MASK 0x0000000c +#define VIVS_GL_VARYING_COMPONENT_USE_COMP1__SHIFT 2 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP1(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP1__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP1__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP2__MASK 0x00000030 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP2__SHIFT 4 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP2(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP2__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP2__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP3__MASK 0x000000c0 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP3__SHIFT 6 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP3(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP3__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP3__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP4__MASK 0x00000300 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP4__SHIFT 8 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP4(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP4__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP4__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP5__MASK 0x00000c00 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP5__SHIFT 10 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP5(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP5__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP5__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP6__MASK 0x00003000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP6__SHIFT 12 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP6(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP6__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP6__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP7__MASK 0x0000c000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP7__SHIFT 14 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP7(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP7__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP7__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP8__MASK 0x00030000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP8__SHIFT 16 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP8(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP8__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP8__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP9__MASK 0x000c0000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP9__SHIFT 18 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP9(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP9__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP9__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP10__MASK 0x00300000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP10__SHIFT 20 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP10(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP10__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP10__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP11__MASK 0x00c00000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP11__SHIFT 22 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP11(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP11__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP11__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP12__MASK 0x03000000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP12__SHIFT 24 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP12(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP12__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP12__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP13__MASK 0x0c000000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP13__SHIFT 26 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP13(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP13__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP13__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP14__MASK 0x30000000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP14__SHIFT 28 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP14(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP14__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP14__MASK) +#define VIVS_GL_VARYING_COMPONENT_USE_COMP15__MASK 0xc0000000 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP15__SHIFT 30 +#define VIVS_GL_VARYING_COMPONENT_USE_COMP15(x) (((x) << VIVS_GL_VARYING_COMPONENT_USE_COMP15__SHIFT) & VIVS_GL_VARYING_COMPONENT_USE_COMP15__MASK) + +#define VIVS_GL_UNK03834 0x00003834 + +#define VIVS_GL_UNK03838 0x00003838 + +#define VIVS_GL_API_MODE 0x0000384c +#define VIVS_GL_API_MODE_OPENGL 0x00000000 +#define VIVS_GL_API_MODE_OPENVG 0x00000001 +#define VIVS_GL_API_MODE_OPENCL 0x00000002 + +#define VIVS_GL_CONTEXT_POINTER 0x00003850 + +#define VIVS_GL_UNK03A00 0x00003a00 + +#define VIVS_GL_STALL_TOKEN 0x00003c00 +#define VIVS_GL_STALL_TOKEN_FROM__MASK 0x0000001f +#define VIVS_GL_STALL_TOKEN_FROM__SHIFT 0 +#define VIVS_GL_STALL_TOKEN_FROM(x) (((x) << VIVS_GL_STALL_TOKEN_FROM__SHIFT) & VIVS_GL_STALL_TOKEN_FROM__MASK) +#define VIVS_GL_STALL_TOKEN_TO__MASK 0x00001f00 +#define VIVS_GL_STALL_TOKEN_TO__SHIFT 8 +#define VIVS_GL_STALL_TOKEN_TO(x) (((x) << VIVS_GL_STALL_TOKEN_TO__SHIFT) & VIVS_GL_STALL_TOKEN_TO__MASK) +#define VIVS_GL_STALL_TOKEN_FLIP0 0x40000000 +#define VIVS_GL_STALL_TOKEN_FLIP1 0x80000000 + +#define VIVS_DUMMY 0x00000000 + +#define VIVS_DUMMY_DUMMY 0x0003fffc + + +#endif /* STATE_XML */ diff --git b/drivers/gpu/drm/etnaviv/state_hi.xml.h b/drivers/gpu/drm/etnaviv/state_hi.xml.h new file mode 100644 index 0000000..6a7de5f --- /dev/null +++ b/drivers/gpu/drm/etnaviv/state_hi.xml.h @@ -0,0 +1,429 @@ +#ifndef STATE_HI_XML +#define STATE_HI_XML + +/* Autogenerated file, DO NOT EDIT manually! + +This file was generated by the rules-ng-ng headergen tool in this git repository: +http://0x04.net/cgit/index.cgi/rules-ng-ng +git clone git://0x04.net/rules-ng-ng + +The rules-ng-ng source files this header was generated from are: +- state_hi.xml ( 24309 bytes, from 2015-12-12 09:02:53) +- common.xml ( 18437 bytes, from 2015-12-12 09:02:53) + +Copyright (C) 2015 +*/ + + +#define MMU_EXCEPTION_SLAVE_NOT_PRESENT 0x00000001 +#define MMU_EXCEPTION_PAGE_NOT_PRESENT 0x00000002 +#define MMU_EXCEPTION_WRITE_VIOLATION 0x00000003 +#define VIVS_HI 0x00000000 + +#define VIVS_HI_CLOCK_CONTROL 0x00000000 +#define VIVS_HI_CLOCK_CONTROL_CLK3D_DIS 0x00000001 +#define VIVS_HI_CLOCK_CONTROL_CLK2D_DIS 0x00000002 +#define VIVS_HI_CLOCK_CONTROL_FSCALE_VAL__MASK 0x000001fc +#define VIVS_HI_CLOCK_CONTROL_FSCALE_VAL__SHIFT 2 +#define VIVS_HI_CLOCK_CONTROL_FSCALE_VAL(x) (((x) << VIVS_HI_CLOCK_CONTROL_FSCALE_VAL__SHIFT) & VIVS_HI_CLOCK_CONTROL_FSCALE_VAL__MASK) +#define VIVS_HI_CLOCK_CONTROL_FSCALE_CMD_LOAD 0x00000200 +#define VIVS_HI_CLOCK_CONTROL_DISABLE_RAM_CLK_GATING 0x00000400 +#define VIVS_HI_CLOCK_CONTROL_DISABLE_DEBUG_REGISTERS 0x00000800 +#define VIVS_HI_CLOCK_CONTROL_SOFT_RESET 0x00001000 +#define VIVS_HI_CLOCK_CONTROL_IDLE_3D 0x00010000 +#define VIVS_HI_CLOCK_CONTROL_IDLE_2D 0x00020000 +#define VIVS_HI_CLOCK_CONTROL_IDLE_VG 0x00040000 +#define VIVS_HI_CLOCK_CONTROL_ISOLATE_GPU 0x00080000 +#define VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE__MASK 0x00f00000 +#define VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE__SHIFT 20 +#define VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE(x) (((x) << VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE__SHIFT) & VIVS_HI_CLOCK_CONTROL_DEBUG_PIXEL_PIPE__MASK) + +#define VIVS_HI_IDLE_STATE 0x00000004 +#define VIVS_HI_IDLE_STATE_FE 0x00000001 +#define VIVS_HI_IDLE_STATE_DE 0x00000002 +#define VIVS_HI_IDLE_STATE_PE 0x00000004 +#define VIVS_HI_IDLE_STATE_SH 0x00000008 +#define VIVS_HI_IDLE_STATE_PA 0x00000010 +#define VIVS_HI_IDLE_STATE_SE 0x00000020 +#define VIVS_HI_IDLE_STATE_RA 0x00000040 +#define VIVS_HI_IDLE_STATE_TX 0x00000080 +#define VIVS_HI_IDLE_STATE_VG 0x00000100 +#define VIVS_HI_IDLE_STATE_IM 0x00000200 +#define VIVS_HI_IDLE_STATE_FP 0x00000400 +#define VIVS_HI_IDLE_STATE_TS 0x00000800 +#define VIVS_HI_IDLE_STATE_AXI_LP 0x80000000 + +#define VIVS_HI_AXI_CONFIG 0x00000008 +#define VIVS_HI_AXI_CONFIG_AWID__MASK 0x0000000f +#define VIVS_HI_AXI_CONFIG_AWID__SHIFT 0 +#define VIVS_HI_AXI_CONFIG_AWID(x) (((x) << VIVS_HI_AXI_CONFIG_AWID__SHIFT) & VIVS_HI_AXI_CONFIG_AWID__MASK) +#define VIVS_HI_AXI_CONFIG_ARID__MASK 0x000000f0 +#define VIVS_HI_AXI_CONFIG_ARID__SHIFT 4 +#define VIVS_HI_AXI_CONFIG_ARID(x) (((x) << VIVS_HI_AXI_CONFIG_ARID__SHIFT) & VIVS_HI_AXI_CONFIG_ARID__MASK) +#define VIVS_HI_AXI_CONFIG_AWCACHE__MASK 0x00000f00 +#define VIVS_HI_AXI_CONFIG_AWCACHE__SHIFT 8 +#define VIVS_HI_AXI_CONFIG_AWCACHE(x) (((x) << VIVS_HI_AXI_CONFIG_AWCACHE__SHIFT) & VIVS_HI_AXI_CONFIG_AWCACHE__MASK) +#define VIVS_HI_AXI_CONFIG_ARCACHE__MASK 0x0000f000 +#define VIVS_HI_AXI_CONFIG_ARCACHE__SHIFT 12 +#define VIVS_HI_AXI_CONFIG_ARCACHE(x) (((x) << VIVS_HI_AXI_CONFIG_ARCACHE__SHIFT) & VIVS_HI_AXI_CONFIG_ARCACHE__MASK) + +#define VIVS_HI_AXI_STATUS 0x0000000c +#define VIVS_HI_AXI_STATUS_WR_ERR_ID__MASK 0x0000000f +#define VIVS_HI_AXI_STATUS_WR_ERR_ID__SHIFT 0 +#define VIVS_HI_AXI_STATUS_WR_ERR_ID(x) (((x) << VIVS_HI_AXI_STATUS_WR_ERR_ID__SHIFT) & VIVS_HI_AXI_STATUS_WR_ERR_ID__MASK) +#define VIVS_HI_AXI_STATUS_RD_ERR_ID__MASK 0x000000f0 +#define VIVS_HI_AXI_STATUS_RD_ERR_ID__SHIFT 4 +#define VIVS_HI_AXI_STATUS_RD_ERR_ID(x) (((x) << VIVS_HI_AXI_STATUS_RD_ERR_ID__SHIFT) & VIVS_HI_AXI_STATUS_RD_ERR_ID__MASK) +#define VIVS_HI_AXI_STATUS_DET_WR_ERR 0x00000100 +#define VIVS_HI_AXI_STATUS_DET_RD_ERR 0x00000200 + +#define VIVS_HI_INTR_ACKNOWLEDGE 0x00000010 +#define VIVS_HI_INTR_ACKNOWLEDGE_INTR_VEC__MASK 0x7fffffff +#define VIVS_HI_INTR_ACKNOWLEDGE_INTR_VEC__SHIFT 0 +#define VIVS_HI_INTR_ACKNOWLEDGE_INTR_VEC(x) (((x) << VIVS_HI_INTR_ACKNOWLEDGE_INTR_VEC__SHIFT) & VIVS_HI_INTR_ACKNOWLEDGE_INTR_VEC__MASK) +#define VIVS_HI_INTR_ACKNOWLEDGE_AXI_BUS_ERROR 0x80000000 + +#define VIVS_HI_INTR_ENBL 0x00000014 +#define VIVS_HI_INTR_ENBL_INTR_ENBL_VEC__MASK 0xffffffff +#define VIVS_HI_INTR_ENBL_INTR_ENBL_VEC__SHIFT 0 +#define VIVS_HI_INTR_ENBL_INTR_ENBL_VEC(x) (((x) << VIVS_HI_INTR_ENBL_INTR_ENBL_VEC__SHIFT) & VIVS_HI_INTR_ENBL_INTR_ENBL_VEC__MASK) + +#define VIVS_HI_CHIP_IDENTITY 0x00000018 +#define VIVS_HI_CHIP_IDENTITY_FAMILY__MASK 0xff000000 +#define VIVS_HI_CHIP_IDENTITY_FAMILY__SHIFT 24 +#define VIVS_HI_CHIP_IDENTITY_FAMILY(x) (((x) << VIVS_HI_CHIP_IDENTITY_FAMILY__SHIFT) & VIVS_HI_CHIP_IDENTITY_FAMILY__MASK) +#define VIVS_HI_CHIP_IDENTITY_PRODUCT__MASK 0x00ff0000 +#define VIVS_HI_CHIP_IDENTITY_PRODUCT__SHIFT 16 +#define VIVS_HI_CHIP_IDENTITY_PRODUCT(x) (((x) << VIVS_HI_CHIP_IDENTITY_PRODUCT__SHIFT) & VIVS_HI_CHIP_IDENTITY_PRODUCT__MASK) +#define VIVS_HI_CHIP_IDENTITY_REVISION__MASK 0x0000f000 +#define VIVS_HI_CHIP_IDENTITY_REVISION__SHIFT 12 +#define VIVS_HI_CHIP_IDENTITY_REVISION(x) (((x) << VIVS_HI_CHIP_IDENTITY_REVISION__SHIFT) & VIVS_HI_CHIP_IDENTITY_REVISION__MASK) + +#define VIVS_HI_CHIP_FEATURE 0x0000001c + +#define VIVS_HI_CHIP_MODEL 0x00000020 + +#define VIVS_HI_CHIP_REV 0x00000024 + +#define VIVS_HI_CHIP_DATE 0x00000028 + +#define VIVS_HI_CHIP_TIME 0x0000002c + +#define VIVS_HI_CHIP_MINOR_FEATURE_0 0x00000034 + +#define VIVS_HI_CACHE_CONTROL 0x00000038 + +#define VIVS_HI_MEMORY_COUNTER_RESET 0x0000003c + +#define VIVS_HI_PROFILE_READ_BYTES8 0x00000040 + +#define VIVS_HI_PROFILE_WRITE_BYTES8 0x00000044 + +#define VIVS_HI_CHIP_SPECS 0x00000048 +#define VIVS_HI_CHIP_SPECS_STREAM_COUNT__MASK 0x0000000f +#define VIVS_HI_CHIP_SPECS_STREAM_COUNT__SHIFT 0 +#define VIVS_HI_CHIP_SPECS_STREAM_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_STREAM_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_STREAM_COUNT__MASK) +#define VIVS_HI_CHIP_SPECS_REGISTER_MAX__MASK 0x000000f0 +#define VIVS_HI_CHIP_SPECS_REGISTER_MAX__SHIFT 4 +#define VIVS_HI_CHIP_SPECS_REGISTER_MAX(x) (((x) << VIVS_HI_CHIP_SPECS_REGISTER_MAX__SHIFT) & VIVS_HI_CHIP_SPECS_REGISTER_MAX__MASK) +#define VIVS_HI_CHIP_SPECS_THREAD_COUNT__MASK 0x00000f00 +#define VIVS_HI_CHIP_SPECS_THREAD_COUNT__SHIFT 8 +#define VIVS_HI_CHIP_SPECS_THREAD_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_THREAD_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_THREAD_COUNT__MASK) +#define VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE__MASK 0x0001f000 +#define VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE__SHIFT 12 +#define VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE(x) (((x) << VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE__SHIFT) & VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE__MASK) +#define VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT__MASK 0x01f00000 +#define VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT__SHIFT 20 +#define VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT__MASK) +#define VIVS_HI_CHIP_SPECS_PIXEL_PIPES__MASK 0x0e000000 +#define VIVS_HI_CHIP_SPECS_PIXEL_PIPES__SHIFT 25 +#define VIVS_HI_CHIP_SPECS_PIXEL_PIPES(x) (((x) << VIVS_HI_CHIP_SPECS_PIXEL_PIPES__SHIFT) & VIVS_HI_CHIP_SPECS_PIXEL_PIPES__MASK) +#define VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE__MASK 0xf0000000 +#define VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE__SHIFT 28 +#define VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE(x) (((x) << VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE__SHIFT) & VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE__MASK) + +#define VIVS_HI_PROFILE_WRITE_BURSTS 0x0000004c + +#define VIVS_HI_PROFILE_WRITE_REQUESTS 0x00000050 + +#define VIVS_HI_PROFILE_READ_BURSTS 0x00000058 + +#define VIVS_HI_PROFILE_READ_REQUESTS 0x0000005c + +#define VIVS_HI_PROFILE_READ_LASTS 0x00000060 + +#define VIVS_HI_GP_OUT0 0x00000064 + +#define VIVS_HI_GP_OUT1 0x00000068 + +#define VIVS_HI_GP_OUT2 0x0000006c + +#define VIVS_HI_AXI_CONTROL 0x00000070 +#define VIVS_HI_AXI_CONTROL_WR_FULL_BURST_MODE 0x00000001 + +#define VIVS_HI_CHIP_MINOR_FEATURE_1 0x00000074 + +#define VIVS_HI_PROFILE_TOTAL_CYCLES 0x00000078 + +#define VIVS_HI_PROFILE_IDLE_CYCLES 0x0000007c + +#define VIVS_HI_CHIP_SPECS_2 0x00000080 +#define VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE__MASK 0x000000ff +#define VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE__SHIFT 0 +#define VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE(x) (((x) << VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE__SHIFT) & VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE__MASK) +#define VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT__MASK 0x0000ff00 +#define VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT__SHIFT 8 +#define VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT__MASK) +#define VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS__MASK 0xffff0000 +#define VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS__SHIFT 16 +#define VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS(x) (((x) << VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS__SHIFT) & VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS__MASK) + +#define VIVS_HI_CHIP_MINOR_FEATURE_2 0x00000084 + +#define VIVS_HI_CHIP_MINOR_FEATURE_3 0x00000088 + +#define VIVS_HI_CHIP_SPECS_3 0x0000008c +#define VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT__MASK 0x000001f0 +#define VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT__SHIFT 4 +#define VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT__MASK) +#define VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT__MASK 0x00000007 +#define VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT__SHIFT 0 +#define VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT__MASK) + +#define VIVS_HI_CHIP_MINOR_FEATURE_4 0x00000094 + +#define VIVS_HI_CHIP_SPECS_4 0x0000009c +#define VIVS_HI_CHIP_SPECS_4_STREAM_COUNT__MASK 0x0001f000 +#define VIVS_HI_CHIP_SPECS_4_STREAM_COUNT__SHIFT 12 +#define VIVS_HI_CHIP_SPECS_4_STREAM_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_4_STREAM_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_4_STREAM_COUNT__MASK) + +#define VIVS_HI_CHIP_MINOR_FEATURE_5 0x000000a0 + +#define VIVS_HI_CHIP_PRODUCT_ID 0x000000a8 + +#define VIVS_PM 0x00000000 + +#define VIVS_PM_POWER_CONTROLS 0x00000100 +#define VIVS_PM_POWER_CONTROLS_ENABLE_MODULE_CLOCK_GATING 0x00000001 +#define VIVS_PM_POWER_CONTROLS_DISABLE_STALL_MODULE_CLOCK_GATING 0x00000002 +#define VIVS_PM_POWER_CONTROLS_DISABLE_STARVE_MODULE_CLOCK_GATING 0x00000004 +#define VIVS_PM_POWER_CONTROLS_TURN_ON_COUNTER__MASK 0x000000f0 +#define VIVS_PM_POWER_CONTROLS_TURN_ON_COUNTER__SHIFT 4 +#define VIVS_PM_POWER_CONTROLS_TURN_ON_COUNTER(x) (((x) << VIVS_PM_POWER_CONTROLS_TURN_ON_COUNTER__SHIFT) & VIVS_PM_POWER_CONTROLS_TURN_ON_COUNTER__MASK) +#define VIVS_PM_POWER_CONTROLS_TURN_OFF_COUNTER__MASK 0xffff0000 +#define VIVS_PM_POWER_CONTROLS_TURN_OFF_COUNTER__SHIFT 16 +#define VIVS_PM_POWER_CONTROLS_TURN_OFF_COUNTER(x) (((x) << VIVS_PM_POWER_CONTROLS_TURN_OFF_COUNTER__SHIFT) & VIVS_PM_POWER_CONTROLS_TURN_OFF_COUNTER__MASK) + +#define VIVS_PM_MODULE_CONTROLS 0x00000104 +#define VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_FE 0x00000001 +#define VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_DE 0x00000002 +#define VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_PE 0x00000004 + +#define VIVS_PM_MODULE_STATUS 0x00000108 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_FE 0x00000001 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_DE 0x00000002 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_PE 0x00000004 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_SH 0x00000008 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_PA 0x00000010 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_SE 0x00000020 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_RA 0x00000040 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_TX 0x00000080 + +#define VIVS_PM_PULSE_EATER 0x0000010c + +#define VIVS_MMUv2 0x00000000 + +#define VIVS_MMUv2_SAFE_ADDRESS 0x00000180 + +#define VIVS_MMUv2_CONFIGURATION 0x00000184 +#define VIVS_MMUv2_CONFIGURATION_MODE__MASK 0x00000001 +#define VIVS_MMUv2_CONFIGURATION_MODE__SHIFT 0 +#define VIVS_MMUv2_CONFIGURATION_MODE_MODE4_K 0x00000000 +#define VIVS_MMUv2_CONFIGURATION_MODE_MODE1_K 0x00000001 +#define VIVS_MMUv2_CONFIGURATION_MODE_MASK 0x00000008 +#define VIVS_MMUv2_CONFIGURATION_FLUSH__MASK 0x00000010 +#define VIVS_MMUv2_CONFIGURATION_FLUSH__SHIFT 4 +#define VIVS_MMUv2_CONFIGURATION_FLUSH_FLUSH 0x00000010 +#define VIVS_MMUv2_CONFIGURATION_FLUSH_MASK 0x00000080 +#define VIVS_MMUv2_CONFIGURATION_ADDRESS_MASK 0x00000100 +#define VIVS_MMUv2_CONFIGURATION_ADDRESS__MASK 0xfffffc00 +#define VIVS_MMUv2_CONFIGURATION_ADDRESS__SHIFT 10 +#define VIVS_MMUv2_CONFIGURATION_ADDRESS(x) (((x) << VIVS_MMUv2_CONFIGURATION_ADDRESS__SHIFT) & VIVS_MMUv2_CONFIGURATION_ADDRESS__MASK) + +#define VIVS_MMUv2_STATUS 0x00000188 +#define VIVS_MMUv2_STATUS_EXCEPTION0__MASK 0x00000003 +#define VIVS_MMUv2_STATUS_EXCEPTION0__SHIFT 0 +#define VIVS_MMUv2_STATUS_EXCEPTION0(x) (((x) << VIVS_MMUv2_STATUS_EXCEPTION0__SHIFT) & VIVS_MMUv2_STATUS_EXCEPTION0__MASK) +#define VIVS_MMUv2_STATUS_EXCEPTION1__MASK 0x00000030 +#define VIVS_MMUv2_STATUS_EXCEPTION1__SHIFT 4 +#define VIVS_MMUv2_STATUS_EXCEPTION1(x) (((x) << VIVS_MMUv2_STATUS_EXCEPTION1__SHIFT) & VIVS_MMUv2_STATUS_EXCEPTION1__MASK) +#define VIVS_MMUv2_STATUS_EXCEPTION2__MASK 0x00000300 +#define VIVS_MMUv2_STATUS_EXCEPTION2__SHIFT 8 +#define VIVS_MMUv2_STATUS_EXCEPTION2(x) (((x) << VIVS_MMUv2_STATUS_EXCEPTION2__SHIFT) & VIVS_MMUv2_STATUS_EXCEPTION2__MASK) +#define VIVS_MMUv2_STATUS_EXCEPTION3__MASK 0x00003000 +#define VIVS_MMUv2_STATUS_EXCEPTION3__SHIFT 12 +#define VIVS_MMUv2_STATUS_EXCEPTION3(x) (((x) << VIVS_MMUv2_STATUS_EXCEPTION3__SHIFT) & VIVS_MMUv2_STATUS_EXCEPTION3__MASK) + +#define VIVS_MMUv2_CONTROL 0x0000018c +#define VIVS_MMUv2_CONTROL_ENABLE 0x00000001 + +#define VIVS_MMUv2_EXCEPTION_ADDR(i0) (0x00000190 + 0x4*(i0)) +#define VIVS_MMUv2_EXCEPTION_ADDR__ESIZE 0x00000004 +#define VIVS_MMUv2_EXCEPTION_ADDR__LEN 0x00000004 + +#define VIVS_MC 0x00000000 + +#define VIVS_MC_MMU_FE_PAGE_TABLE 0x00000400 + +#define VIVS_MC_MMU_TX_PAGE_TABLE 0x00000404 + +#define VIVS_MC_MMU_PE_PAGE_TABLE 0x00000408 + +#define VIVS_MC_MMU_PEZ_PAGE_TABLE 0x0000040c + +#define VIVS_MC_MMU_RA_PAGE_TABLE 0x00000410 + +#define VIVS_MC_DEBUG_MEMORY 0x00000414 +#define VIVS_MC_DEBUG_MEMORY_SPECIAL_PATCH_GC320 0x00000008 +#define VIVS_MC_DEBUG_MEMORY_FAST_CLEAR_BYPASS 0x00100000 +#define VIVS_MC_DEBUG_MEMORY_COMPRESSION_BYPASS 0x00200000 + +#define VIVS_MC_MEMORY_BASE_ADDR_RA 0x00000418 + +#define VIVS_MC_MEMORY_BASE_ADDR_FE 0x0000041c + +#define VIVS_MC_MEMORY_BASE_ADDR_TX 0x00000420 + +#define VIVS_MC_MEMORY_BASE_ADDR_PEZ 0x00000424 + +#define VIVS_MC_MEMORY_BASE_ADDR_PE 0x00000428 + +#define VIVS_MC_MEMORY_TIMING_CONTROL 0x0000042c + +#define VIVS_MC_MEMORY_FLUSH 0x00000430 + +#define VIVS_MC_PROFILE_CYCLE_COUNTER 0x00000438 + +#define VIVS_MC_DEBUG_READ0 0x0000043c + +#define VIVS_MC_DEBUG_READ1 0x00000440 + +#define VIVS_MC_DEBUG_WRITE 0x00000444 + +#define VIVS_MC_PROFILE_RA_READ 0x00000448 + +#define VIVS_MC_PROFILE_TX_READ 0x0000044c + +#define VIVS_MC_PROFILE_FE_READ 0x00000450 + +#define VIVS_MC_PROFILE_PE_READ 0x00000454 + +#define VIVS_MC_PROFILE_DE_READ 0x00000458 + +#define VIVS_MC_PROFILE_SH_READ 0x0000045c + +#define VIVS_MC_PROFILE_PA_READ 0x00000460 + +#define VIVS_MC_PROFILE_SE_READ 0x00000464 + +#define VIVS_MC_PROFILE_MC_READ 0x00000468 + +#define VIVS_MC_PROFILE_HI_READ 0x0000046c + +#define VIVS_MC_PROFILE_CONFIG0 0x00000470 +#define VIVS_MC_PROFILE_CONFIG0_FE__MASK 0x0000000f +#define VIVS_MC_PROFILE_CONFIG0_FE__SHIFT 0 +#define VIVS_MC_PROFILE_CONFIG0_FE_RESET 0x0000000f +#define VIVS_MC_PROFILE_CONFIG0_DE__MASK 0x00000f00 +#define VIVS_MC_PROFILE_CONFIG0_DE__SHIFT 8 +#define VIVS_MC_PROFILE_CONFIG0_DE_RESET 0x00000f00 +#define VIVS_MC_PROFILE_CONFIG0_PE__MASK 0x000f0000 +#define VIVS_MC_PROFILE_CONFIG0_PE__SHIFT 16 +#define VIVS_MC_PROFILE_CONFIG0_PE_PIXEL_COUNT_KILLED_BY_COLOR_PIPE 0x00000000 +#define VIVS_MC_PROFILE_CONFIG0_PE_PIXEL_COUNT_KILLED_BY_DEPTH_PIPE 0x00010000 +#define VIVS_MC_PROFILE_CONFIG0_PE_PIXEL_COUNT_DRAWN_BY_COLOR_PIPE 0x00020000 +#define VIVS_MC_PROFILE_CONFIG0_PE_PIXEL_COUNT_DRAWN_BY_DEPTH_PIPE 0x00030000 +#define VIVS_MC_PROFILE_CONFIG0_PE_PIXELS_RENDERED_2D 0x000b0000 +#define VIVS_MC_PROFILE_CONFIG0_PE_RESET 0x000f0000 +#define VIVS_MC_PROFILE_CONFIG0_SH__MASK 0x0f000000 +#define VIVS_MC_PROFILE_CONFIG0_SH__SHIFT 24 +#define VIVS_MC_PROFILE_CONFIG0_SH_SHADER_CYCLES 0x04000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_PS_INST_COUNTER 0x07000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_RENDERED_PIXEL_COUNTER 0x08000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_VS_INST_COUNTER 0x09000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_RENDERED_VERTICE_COUNTER 0x0a000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_VTX_BRANCH_INST_COUNTER 0x0b000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_VTX_TEXLD_INST_COUNTER 0x0c000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_PXL_BRANCH_INST_COUNTER 0x0d000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_PXL_TEXLD_INST_COUNTER 0x0e000000 +#define VIVS_MC_PROFILE_CONFIG0_SH_RESET 0x0f000000 + +#define VIVS_MC_PROFILE_CONFIG1 0x00000474 +#define VIVS_MC_PROFILE_CONFIG1_PA__MASK 0x0000000f +#define VIVS_MC_PROFILE_CONFIG1_PA__SHIFT 0 +#define VIVS_MC_PROFILE_CONFIG1_PA_INPUT_VTX_COUNTER 0x00000003 +#define VIVS_MC_PROFILE_CONFIG1_PA_INPUT_PRIM_COUNTER 0x00000004 +#define VIVS_MC_PROFILE_CONFIG1_PA_OUTPUT_PRIM_COUNTER 0x00000005 +#define VIVS_MC_PROFILE_CONFIG1_PA_DEPTH_CLIPPED_COUNTER 0x00000006 +#define VIVS_MC_PROFILE_CONFIG1_PA_TRIVIAL_REJECTED_COUNTER 0x00000007 +#define VIVS_MC_PROFILE_CONFIG1_PA_CULLED_COUNTER 0x00000008 +#define VIVS_MC_PROFILE_CONFIG1_PA_RESET 0x0000000f +#define VIVS_MC_PROFILE_CONFIG1_SE__MASK 0x00000f00 +#define VIVS_MC_PROFILE_CONFIG1_SE__SHIFT 8 +#define VIVS_MC_PROFILE_CONFIG1_SE_CULLED_TRIANGLE_COUNT 0x00000000 +#define VIVS_MC_PROFILE_CONFIG1_SE_CULLED_LINES_COUNT 0x00000100 +#define VIVS_MC_PROFILE_CONFIG1_SE_RESET 0x00000f00 +#define VIVS_MC_PROFILE_CONFIG1_RA__MASK 0x000f0000 +#define VIVS_MC_PROFILE_CONFIG1_RA__SHIFT 16 +#define VIVS_MC_PROFILE_CONFIG1_RA_VALID_PIXEL_COUNT 0x00000000 +#define VIVS_MC_PROFILE_CONFIG1_RA_TOTAL_QUAD_COUNT 0x00010000 +#define VIVS_MC_PROFILE_CONFIG1_RA_VALID_QUAD_COUNT_AFTER_EARLY_Z 0x00020000 +#define VIVS_MC_PROFILE_CONFIG1_RA_TOTAL_PRIMITIVE_COUNT 0x00030000 +#define VIVS_MC_PROFILE_CONFIG1_RA_PIPE_CACHE_MISS_COUNTER 0x00090000 +#define VIVS_MC_PROFILE_CONFIG1_RA_PREFETCH_CACHE_MISS_COUNTER 0x000a0000 +#define VIVS_MC_PROFILE_CONFIG1_RA_CULLED_QUAD_COUNT 0x000b0000 +#define VIVS_MC_PROFILE_CONFIG1_RA_RESET 0x000f0000 +#define VIVS_MC_PROFILE_CONFIG1_TX__MASK 0x0f000000 +#define VIVS_MC_PROFILE_CONFIG1_TX__SHIFT 24 +#define VIVS_MC_PROFILE_CONFIG1_TX_TOTAL_BILINEAR_REQUESTS 0x00000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_TOTAL_TRILINEAR_REQUESTS 0x01000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_TOTAL_DISCARDED_TEXTURE_REQUESTS 0x02000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_TOTAL_TEXTURE_REQUESTS 0x03000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_UNKNOWN 0x04000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_MEM_READ_COUNT 0x05000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_MEM_READ_IN_8B_COUNT 0x06000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_CACHE_MISS_COUNT 0x07000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_CACHE_HIT_TEXEL_COUNT 0x08000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_CACHE_MISS_TEXEL_COUNT 0x09000000 +#define VIVS_MC_PROFILE_CONFIG1_TX_RESET 0x0f000000 + +#define VIVS_MC_PROFILE_CONFIG2 0x00000478 +#define VIVS_MC_PROFILE_CONFIG2_MC__MASK 0x0000000f +#define VIVS_MC_PROFILE_CONFIG2_MC__SHIFT 0 +#define VIVS_MC_PROFILE_CONFIG2_MC_TOTAL_READ_REQ_8B_FROM_PIPELINE 0x00000001 +#define VIVS_MC_PROFILE_CONFIG2_MC_TOTAL_READ_REQ_8B_FROM_IP 0x00000002 +#define VIVS_MC_PROFILE_CONFIG2_MC_TOTAL_WRITE_REQ_8B_FROM_PIPELINE 0x00000003 +#define VIVS_MC_PROFILE_CONFIG2_MC_RESET 0x0000000f +#define VIVS_MC_PROFILE_CONFIG2_HI__MASK 0x00000f00 +#define VIVS_MC_PROFILE_CONFIG2_HI__SHIFT 8 +#define VIVS_MC_PROFILE_CONFIG2_HI_AXI_CYCLES_READ_REQUEST_STALLED 0x00000000 +#define VIVS_MC_PROFILE_CONFIG2_HI_AXI_CYCLES_WRITE_REQUEST_STALLED 0x00000100 +#define VIVS_MC_PROFILE_CONFIG2_HI_AXI_CYCLES_WRITE_DATA_STALLED 0x00000200 +#define VIVS_MC_PROFILE_CONFIG2_HI_RESET 0x00000f00 + +#define VIVS_MC_PROFILE_CONFIG3 0x0000047c + +#define VIVS_MC_BUS_CONFIG 0x00000480 +#define VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG__MASK 0x0000000f +#define VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG__SHIFT 0 +#define VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG(x) (((x) << VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG__SHIFT) & VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG__MASK) +#define VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG__MASK 0x000000f0 +#define VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG__SHIFT 4 +#define VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG(x) (((x) << VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG__SHIFT) & VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG__MASK) + +#define VIVS_MC_START_COMPOSITION 0x00000554 + +#define VIVS_MC_128B_MERGE 0x00000558 + + +#endif /* STATE_HI_XML */ diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig index 22c7ed6..d19bd80 100644 --- a/drivers/gpu/drm/i2c/Kconfig +++ b/drivers/gpu/drm/i2c/Kconfig @@ -7,6 +7,12 @@ config DRM_I2C_ADV7511 help Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders. +config DRM_I2C_ADIHDMI + tristate "ADI HDMI encoder" + default m if DRM_TILCDC + help + Support for ADI HDMI encoder. + config DRM_I2C_CH7006 tristate "Chrontel ch7006 TV encoder" default m if DRM_NOUVEAU diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile index 2c72eb5..5a509ae 100644 --- a/drivers/gpu/drm/i2c/Makefile +++ b/drivers/gpu/drm/i2c/Makefile @@ -10,3 +10,6 @@ obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o tda998x-y := tda998x_drv.o obj-$(CONFIG_DRM_I2C_NXP_TDA998X) += tda998x.o + +adihdmi-y := adihdmi_drv.o +obj-$(CONFIG_DRM_I2C_ADIHDMI) += adihdmi.o diff --git b/drivers/gpu/drm/i2c/adihdmi.h b/drivers/gpu/drm/i2c/adihdmi.h new file mode 100644 index 0000000..58d9a2b --- /dev/null +++ b/drivers/gpu/drm/i2c/adihdmi.h @@ -0,0 +1,289 @@ +/* + * Analog Devices ADIHDMI HDMI transmitter driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __DRM_I2C_ADIHDMI_H__ +#define __DRM_I2C_ADIHDMI_H__ + +#include + +#define ADIHDMI_REG_CHIP_REVISION 0x00 +#define ADIHDMI_REG_N0 0x01 +#define ADIHDMI_REG_N1 0x02 +#define ADIHDMI_REG_N2 0x03 +#define ADIHDMI_REG_SPDIF_FREQ 0x04 +#define ADIHDMI_REG_CTS_AUTOMATIC1 0x05 +#define ADIHDMI_REG_CTS_AUTOMATIC2 0x06 +#define ADIHDMI_REG_CTS_MANUAL0 0x07 +#define ADIHDMI_REG_CTS_MANUAL1 0x08 +#define ADIHDMI_REG_CTS_MANUAL2 0x09 +#define ADIHDMI_REG_AUDIO_SOURCE 0x0a +#define ADIHDMI_REG_AUDIO_CONFIG 0x0b +#define ADIHDMI_REG_I2S_CONFIG 0x0c +#define ADIHDMI_REG_I2S_WIDTH 0x0d +#define ADIHDMI_REG_AUDIO_SUB_SRC0 0x0e +#define ADIHDMI_REG_AUDIO_SUB_SRC1 0x0f +#define ADIHDMI_REG_AUDIO_SUB_SRC2 0x10 +#define ADIHDMI_REG_AUDIO_SUB_SRC3 0x11 +#define ADIHDMI_REG_AUDIO_CFG1 0x12 +#define ADIHDMI_REG_AUDIO_CFG2 0x13 +#define ADIHDMI_REG_AUDIO_CFG3 0x14 +#define ADIHDMI_REG_I2C_FREQ_ID_CFG 0x15 +#define ADIHDMI_REG_VIDEO_INPUT_CFG1 0x16 +#define ADIHDMI_REG_CSC_UPPER(x) (0x18 + (x) * 2) +#define ADIHDMI_REG_CSC_LOWER(x) (0x19 + (x) * 2) +#define ADIHDMI_REG_SYNC_DECODER(x) (0x30 + (x)) +#define ADIHDMI_REG_DE_GENERATOR (0x35 + (x)) +#define ADIHDMI_REG_PIXEL_REPETITION 0x3b +#define ADIHDMI_REG_VIC_MANUAL 0x3c +#define ADIHDMI_REG_VIC_SEND 0x3d +#define ADIHDMI_REG_VIC_DETECTED 0x3e +#define ADIHDMI_REG_AUX_VIC_DETECTED 0x3f +#define ADIHDMI_REG_PACKET_ENABLE0 0x40 +#define ADIHDMI_REG_POWER 0x41 +#define ADIHDMI_REG_STATUS 0x42 +#define ADIHDMI_REG_EDID_I2C_ADDR 0x43 +#define ADIHDMI_REG_PACKET_ENABLE1 0x44 +#define ADIHDMI_REG_PACKET_I2C_ADDR 0x45 +#define ADIHDMI_REG_DSD_ENABLE 0x46 +#define ADIHDMI_REG_VIDEO_INPUT_CFG2 0x48 +#define ADIHDMI_REG_INFOFRAME_UPDATE 0x4a +#define ADIHDMI_REG_GC(x) (0x4b + (x)) /* 0x4b - 0x51 */ +#define ADIHDMI_REG_AVI_INFOFRAME_VERSION 0x52 +#define ADIHDMI_REG_AVI_INFOFRAME_LENGTH 0x53 +#define ADIHDMI_REG_AVI_INFOFRAME_CHECKSUM 0x54 +#define ADIHDMI_REG_AVI_INFOFRAME(x) (0x55 + (x)) /* 0x55 - 0x6f */ +#define ADIHDMI_REG_AUDIO_INFOFRAME_VERSION 0x70 +#define ADIHDMI_REG_AUDIO_INFOFRAME_LENGTH 0x71 +#define ADIHDMI_REG_AUDIO_INFOFRAME_CHECKSUM 0x72 +#define ADIHDMI_REG_AUDIO_INFOFRAME(x) (0x73 + (x)) /* 0x73 - 0x7c */ +#define ADIHDMI_REG_INT_ENABLE(x) (0x94 + (x)) +#define ADIHDMI_REG_INT(x) (0x96 + (x)) +#define ADIHDMI_REG_INPUT_CLK_DIV 0x9d +#define ADIHDMI_REG_PLL_STATUS 0x9e +#define ADIHDMI_REG_HDMI_POWER 0xa1 +#define ADIHDMI_REG_HDCP_HDMI_CFG 0xaf +#define ADIHDMI_REG_AN(x) (0xb0 + (x)) /* 0xb0 - 0xb7 */ +#define ADIHDMI_REG_HDCP_STATUS 0xb8 +#define ADIHDMI_REG_BCAPS 0xbe +#define ADIHDMI_REG_BKSV(x) (0xc0 + (x)) /* 0xc0 - 0xc3 */ +#define ADIHDMI_REG_EDID_SEGMENT 0xc4 +#define ADIHDMI_REG_DDC_STATUS 0xc8 +#define ADIHDMI_REG_EDID_READ_CTRL 0xc9 +#define ADIHDMI_REG_BSTATUS(x) (0xca + (x)) /* 0xca - 0xcb */ +#define ADIHDMI_REG_TIMING_GEN_SEQ 0xd0 +#define ADIHDMI_REG_POWER2 0xd6 +#define ADIHDMI_REG_HSYNC_PLACEMENT_MSB 0xfa + +#define ADIHDMI_REG_SYNC_ADJUSTMENT(x) (0xd7 + (x)) /* 0xd7 - 0xdc */ +#define ADIHDMI_REG_TMDS_CLOCK_INV 0xde +#define ADIHDMI_REG_ARC_CTRL 0xdf +#define ADIHDMI_REG_CEC_I2C_ADDR 0xe1 +#define ADIHDMI_REG_CEC_CTRL 0xe2 +#define ADIHDMI_REG_CHIP_ID_HIGH 0xf5 +#define ADIHDMI_REG_CHIP_ID_LOW 0xf6 + +#define ADIHDMI_CSC_ENABLE BIT(7) +#define ADIHDMI_CSC_UPDATE_MODE BIT(5) + +#define ADIHDMI_INT0_HDP BIT(7) +#define ADIHDMI_INT0_VSYNC BIT(5) +#define ADIHDMI_INT0_AUDIO_FIFO_FULL BIT(4) +#define ADIHDMI_INT0_EDID_READY BIT(2) +#define ADIHDMI_INT0_HDCP_AUTHENTICATED BIT(1) + +#define ADIHDMI_INT1_DDC_ERROR BIT(7) +#define ADIHDMI_INT1_BKSV BIT(6) +#define ADIHDMI_INT1_CEC_TX_READY BIT(5) +#define ADIHDMI_INT1_CEC_TX_ARBIT_LOST BIT(4) +#define ADIHDMI_INT1_CEC_TX_RETRY_TIMEOUT BIT(3) +#define ADIHDMI_INT1_CEC_RX_READY3 BIT(2) +#define ADIHDMI_INT1_CEC_RX_READY2 BIT(1) +#define ADIHDMI_INT1_CEC_RX_READY1 BIT(0) + +#define ADIHDMI_ARC_CTRL_POWER_DOWN BIT(0) + +#define ADIHDMI_CEC_CTRL_POWER_DOWN BIT(0) + +#define ADIHDMI_POWER_POWER_DOWN BIT(6) + +#define ADIHDMI_HDMI_CFG_MODE_MASK 0x2 +#define ADIHDMI_HDMI_CFG_MODE_DVI 0x0 +#define ADIHDMI_HDMI_CFG_MODE_HDMI 0x2 + +#define ADIHDMI_AUDIO_SELECT_I2C 0x0 +#define ADIHDMI_AUDIO_SELECT_SPDIF 0x1 +#define ADIHDMI_AUDIO_SELECT_DSD 0x2 +#define ADIHDMI_AUDIO_SELECT_HBR 0x3 +#define ADIHDMI_AUDIO_SELECT_DST 0x4 + +#define ADIHDMI_I2S_SAMPLE_LEN_16 0x2 +#define ADIHDMI_I2S_SAMPLE_LEN_20 0x3 +#define ADIHDMI_I2S_SAMPLE_LEN_18 0x4 +#define ADIHDMI_I2S_SAMPLE_LEN_22 0x5 +#define ADIHDMI_I2S_SAMPLE_LEN_19 0x8 +#define ADIHDMI_I2S_SAMPLE_LEN_23 0x9 +#define ADIHDMI_I2S_SAMPLE_LEN_24 0xb +#define ADIHDMI_I2S_SAMPLE_LEN_17 0xc +#define ADIHDMI_I2S_SAMPLE_LEN_21 0xd + +#define ADIHDMI_SAMPLE_FREQ_44100 0x0 +#define ADIHDMI_SAMPLE_FREQ_48000 0x2 +#define ADIHDMI_SAMPLE_FREQ_32000 0x3 +#define ADIHDMI_SAMPLE_FREQ_88200 0x8 +#define ADIHDMI_SAMPLE_FREQ_96000 0xa +#define ADIHDMI_SAMPLE_FREQ_176400 0xc +#define ADIHDMI_SAMPLE_FREQ_192000 0xe + +#define ADIHDMI_STATUS_POWER_DOWN_POLARITY BIT(7) +#define ADIHDMI_STATUS_HPD BIT(6) +#define ADIHDMI_STATUS_MONITOR_SENSE BIT(5) +#define ADIHDMI_STATUS_I2S_32BIT_MODE BIT(3) + +#define ADIHDMI_PACKET_ENABLE_N_CTS BIT(8+6) +#define ADIHDMI_PACKET_ENABLE_AUDIO_SAMPLE BIT(8+5) +#define ADIHDMI_PACKET_ENABLE_AVI_INFOFRAME BIT(8+4) +#define ADIHDMI_PACKET_ENABLE_AUDIO_INFOFRAME BIT(8+3) +#define ADIHDMI_PACKET_ENABLE_GC BIT(7) +#define ADIHDMI_PACKET_ENABLE_SPD BIT(6) +#define ADIHDMI_PACKET_ENABLE_MPEG BIT(5) +#define ADIHDMI_PACKET_ENABLE_ACP BIT(4) +#define ADIHDMI_PACKET_ENABLE_ISRC BIT(3) +#define ADIHDMI_PACKET_ENABLE_GM BIT(2) +#define ADIHDMI_PACKET_ENABLE_SPARE2 BIT(1) +#define ADIHDMI_PACKET_ENABLE_SPARE1 BIT(0) + +#define ADIHDMI_REG_POWER2_HDP_SRC_MASK 0xc0 +#define ADIHDMI_REG_POWER2_HDP_SRC_BOTH 0x00 +#define ADIHDMI_REG_POWER2_HDP_SRC_HDP 0x40 +#define ADIHDMI_REG_POWER2_HDP_SRC_CEC 0x80 +#define ADIHDMI_REG_POWER2_HDP_SRC_NONE 0xc0 +#define ADIHDMI_REG_POWER2_TDMS_ENABLE BIT(4) +#define ADIHDMI_REG_POWER2_GATE_INPUT_CLK BIT(0) + +#define ADIHDMI_LOW_REFRESH_RATE_NONE 0x0 +#define ADIHDMI_LOW_REFRESH_RATE_24HZ 0x1 +#define ADIHDMI_LOW_REFRESH_RATE_25HZ 0x2 +#define ADIHDMI_LOW_REFRESH_RATE_30HZ 0x3 + +#define ADIHDMI_AUDIO_CFG3_LEN_MASK 0x0f +#define ADIHDMI_I2C_FREQ_ID_CFG_RATE_MASK 0xf0 + +#define ADIHDMI_AUDIO_SOURCE_I2S 0 +#define ADIHDMI_AUDIO_SOURCE_SPDIF 1 + +#define ADIHDMI_I2S_FORMAT_I2S 0 +#define ADIHDMI_I2S_FORMAT_RIGHT_J 1 +#define ADIHDMI_I2S_FORMAT_LEFT_J 2 + +#define ADIHDMI_PACKET(p, x) ((p) * 0x20 + (x)) +#define ADIHDMI_PACKET_SDP(x) ADIHDMI_PACKET(0, x) +#define ADIHDMI_PACKET_MPEG(x) ADIHDMI_PACKET(1, x) +#define ADIHDMI_PACKET_ACP(x) ADIHDMI_PACKET(2, x) +#define ADIHDMI_PACKET_ISRC1(x) ADIHDMI_PACKET(3, x) +#define ADIHDMI_PACKET_ISRC2(x) ADIHDMI_PACKET(4, x) +#define ADIHDMI_PACKET_GM(x) ADIHDMI_PACKET(5, x) +#define ADIHDMI_PACKET_SPARE(x) ADIHDMI_PACKET(6, x) + +enum adihdmi_input_clock { + ADIHDMI_INPUT_CLOCK_1X, + ADIHDMI_INPUT_CLOCK_2X, + ADIHDMI_INPUT_CLOCK_DDR, +}; + +enum adihdmi_input_justification { + ADIHDMI_INPUT_JUSTIFICATION_EVENLY = 0, + ADIHDMI_INPUT_JUSTIFICATION_RIGHT = 1, + ADIHDMI_INPUT_JUSTIFICATION_LEFT = 2, +}; + +enum adihdmi_input_sync_pulse { + ADIHDMI_INPUT_SYNC_PULSE_DE = 0, + ADIHDMI_INPUT_SYNC_PULSE_HSYNC = 1, + ADIHDMI_INPUT_SYNC_PULSE_VSYNC = 2, + ADIHDMI_INPUT_SYNC_PULSE_NONE = 3, +}; + +/** + * enum adihdmi_sync_polarity - Polarity for the input sync signals + * @ADIHDMI_SYNC_POLARITY_PASSTHROUGH: Sync polarity matches that of + * the currently configured mode. + * @ADIHDMI_SYNC_POLARITY_LOW: Sync polarity is low + * @ADIHDMI_SYNC_POLARITY_HIGH: Sync polarity is high + * + * If the polarity is set to either LOW or HIGH the driver will configure the + * ADIHDMI to internally invert the sync signal if required to match the sync + * polarity setting for the currently selected output mode. + * + * If the polarity is set to PASSTHROUGH, the ADIHDMI will route the signal + * unchanged. This is used when the upstream graphics core already generates + * the sync signals with the correct polarity. + */ +enum adihdmi_sync_polarity { + ADIHDMI_SYNC_POLARITY_PASSTHROUGH, + ADIHDMI_SYNC_POLARITY_LOW, + ADIHDMI_SYNC_POLARITY_HIGH, +}; + +/** + * struct adihdmi_link_config - Describes adihdmi hardware configuration + * @input_color_depth: Number of bits per color component (8, 10 or 12) + * @input_colorspace: The input colorspace (RGB, YUV444, YUV422) + * @input_clock: The input video clock style (1x, 2x, DDR) + * @input_style: The input component arrangement variant + * @input_justification: Video input format bit justification + * @clock_delay: Clock delay for the input clock (in ps) + * @embedded_sync: Video input uses BT.656-style embedded sync + * @sync_pulse: Select the sync pulse + * @vsync_polarity: vsync input signal configuration + * @hsync_polarity: hsync input signal configuration + */ +struct adihdmi_link_config { + unsigned int input_color_depth; + enum hdmi_colorspace input_colorspace; + enum adihdmi_input_clock input_clock; + unsigned int input_style; + enum adihdmi_input_justification input_justification; + + int clock_delay; + + bool embedded_sync; + enum adihdmi_input_sync_pulse sync_pulse; + enum adihdmi_sync_polarity vsync_polarity; + enum adihdmi_sync_polarity hsync_polarity; +}; + +/** + * enum adihdmi_csc_scaling - Scaling factor for the ADIHDMI CSC + * @ADIHDMI_CSC_SCALING_1: CSC results are not scaled + * @ADIHDMI_CSC_SCALING_2: CSC results are scaled by a factor of two + * @ADIHDMI_CSC_SCALING_4: CSC results are scalled by a factor of four + */ +enum adihdmi_csc_scaling { + ADIHDMI_CSC_SCALING_1 = 0, + ADIHDMI_CSC_SCALING_2 = 1, + ADIHDMI_CSC_SCALING_4 = 2, +}; + +/** + * struct adihdmi_video_config - Describes adihdmi hardware configuration + * @csc_enable: Whether to enable color space conversion + * @csc_scaling_factor: Color space conversion scaling factor + * @csc_coefficents: Color space conversion coefficents + * @hdmi_mode: Whether to use HDMI or DVI output mode + * @avi_infoframe: HDMI infoframe + */ +struct adihdmi_video_config { + bool csc_enable; + enum adihdmi_csc_scaling csc_scaling_factor; + const uint16_t *csc_coefficents; + + bool hdmi_mode; + struct hdmi_avi_infoframe avi_infoframe; +}; + +#endif /* __DRM_I2C_ADIHDMI_H__ */ diff --git b/drivers/gpu/drm/i2c/adihdmi_drv.c b/drivers/gpu/drm/i2c/adihdmi_drv.c new file mode 100644 index 0000000..2b9106e --- /dev/null +++ b/drivers/gpu/drm/i2c/adihdmi_drv.c @@ -0,0 +1,1282 @@ +/* + * Analog Devices ADIHDMI HDMI transmitter driver + * + * Copyright 2012 Analog Devices Inc. + * Copyright 2015 Konsulko Group + * + * Licensed under the GPL-2. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "adihdmi.h" + +#define ADIHDMI_INFOFRAME_PACKETS (0x7900) + +struct adihdmi { + struct i2c_client *i2c_main; + struct i2c_client *i2c_edid; + + struct regmap *regmap; + struct regmap *packet_memory_regmap; + enum drm_connector_status status; + bool powered; + + unsigned int f_tmds; + + unsigned int current_edid_segment; + uint8_t edid_buf[256]; + bool edid_read; + + wait_queue_head_t wq; + struct drm_encoder *encoder; + + bool embedded_sync; + enum adihdmi_sync_polarity vsync_polarity; + enum adihdmi_sync_polarity hsync_polarity; + bool rgb; + + struct edid *edid; + + struct gpio_desc *gpio_pd; +}; + +struct adihdmi2 { + struct adihdmi base; + struct drm_encoder encoder; + struct drm_connector connector; +}; + +/* ADI recommended values for proper operation. */ +static const struct reg_sequence adihdmi_fixed_registers[] = { + { 0x98, 0x03 }, + { 0x9a, 0xe0 }, + { 0x9c, 0x30 }, + { 0x9d, 0x61 }, + { 0xa2, 0xa4 }, + { 0xa3, 0xa4 }, + { 0xe0, 0xd0 }, + { 0xf9, 0x00 }, + { 0x55, 0x02 }, +}; + +/* ----------------------------------------------------------------------------- + * Register access + */ + +static const uint8_t adihdmi_register_defaults[] = { + 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */ + 0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13, + 0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */ + 0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84, + 0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */ + 0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */ + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0, + 0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */ + 0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */ + 0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00, + 0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */ + 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */ + 0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04, + 0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01, + 0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */ + 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static bool adihdmi_register_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ADIHDMI_REG_CHIP_REVISION: + case ADIHDMI_REG_SPDIF_FREQ: + case ADIHDMI_REG_CTS_AUTOMATIC1: + case ADIHDMI_REG_CTS_AUTOMATIC2: + case ADIHDMI_REG_VIC_DETECTED: + case ADIHDMI_REG_VIC_SEND: + case ADIHDMI_REG_AUX_VIC_DETECTED: + case ADIHDMI_REG_STATUS: + case ADIHDMI_REG_GC(1): + case ADIHDMI_REG_INT(0): + case ADIHDMI_REG_INT(1): + case ADIHDMI_REG_PLL_STATUS: + case ADIHDMI_REG_AN(0): + case ADIHDMI_REG_AN(1): + case ADIHDMI_REG_AN(2): + case ADIHDMI_REG_AN(3): + case ADIHDMI_REG_AN(4): + case ADIHDMI_REG_AN(5): + case ADIHDMI_REG_AN(6): + case ADIHDMI_REG_AN(7): + case ADIHDMI_REG_HDCP_STATUS: + case ADIHDMI_REG_BCAPS: + case ADIHDMI_REG_BKSV(0): + case ADIHDMI_REG_BKSV(1): + case ADIHDMI_REG_BKSV(2): + case ADIHDMI_REG_BKSV(3): + case ADIHDMI_REG_BKSV(4): + case ADIHDMI_REG_DDC_STATUS: + case ADIHDMI_REG_BSTATUS(0): + case ADIHDMI_REG_BSTATUS(1): + case ADIHDMI_REG_CHIP_ID_HIGH: + case ADIHDMI_REG_CHIP_ID_LOW: + return true; + } + + return false; +} + +static const struct regmap_config adihdmi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0xff, + .cache_type = REGCACHE_RBTREE, + .reg_defaults_raw = adihdmi_register_defaults, + .num_reg_defaults_raw = ARRAY_SIZE(adihdmi_register_defaults), + + .volatile_reg = adihdmi_register_volatile, +}; + +/* ----------------------------------------------------------------------------- + * Hardware configuration + */ + + static void adihdmi_audio_setup(struct adihdmi * adihdmi) +{ + /* Select I2S. */ + regmap_write(adihdmi->regmap, ADIHDMI_REG_AUDIO_SOURCE, 0x01); + regmap_write(adihdmi->regmap, ADIHDMI_REG_I2S_CONFIG, 0x84); + + /* Setup clocks for 48KHz. */ + regmap_write(adihdmi->regmap, ADIHDMI_REG_N0, 0x00); + regmap_write(adihdmi->regmap, ADIHDMI_REG_N1, 0x18); + regmap_write(adihdmi->regmap, ADIHDMI_REG_N2, 0x00); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_I2C_FREQ_ID_CFG, 0xF0, 0x20); + + /* Set audio word length to 24 bits. */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_AUDIO_CFG3, 0x0F, 0x0B); + + /* Update audio infoframe. */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_INFOFRAME_UPDATE, 0x20, 0x20); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_AUDIO_INFOFRAME(0), 0x07, 0x01); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_AUDIO_INFOFRAME(3), 0x1F, 0x00); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_INFOFRAME_UPDATE, 0x20, 0x00); +} + +static void adihdmi_set_colormap(struct adihdmi *adihdmi, bool enable, + const uint16_t *coeff, + unsigned int scaling_factor) +{ + unsigned int i; + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_CSC_UPPER(1), + ADIHDMI_CSC_UPDATE_MODE, ADIHDMI_CSC_UPDATE_MODE); + + if (enable) { + for (i = 0; i < 12; ++i) { + regmap_update_bits(adihdmi->regmap, + ADIHDMI_REG_CSC_UPPER(i), + 0x1f, coeff[i] >> 8); + regmap_write(adihdmi->regmap, + ADIHDMI_REG_CSC_LOWER(i), + coeff[i] & 0xff); + } + } + + if (enable) + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_CSC_UPPER(0), + 0xe0, 0x80 | (scaling_factor << 5)); + else + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_CSC_UPPER(0), + 0x80, 0x00); + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_CSC_UPPER(1), + ADIHDMI_CSC_UPDATE_MODE, 0); +} + +static int adihdmi_packet_enable(struct adihdmi *adihdmi, unsigned int packet) +{ + if (packet & 0xff) + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_PACKET_ENABLE0, + packet, 0xff); + + if (packet & 0xff00) { + packet >>= 8; + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_PACKET_ENABLE1, + packet, 0xff); + } + + return 0; +} + +static int adihdmi_packet_disable(struct adihdmi *adihdmi, unsigned int packet) +{ + if (packet & 0xff) + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_PACKET_ENABLE0, + packet, 0x00); + + if (packet & 0xff00) { + packet >>= 8; + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_PACKET_ENABLE1, + packet, 0x00); + } + + return 0; +} + +/* Coefficients for adihdmi color space conversion */ +static const uint16_t adihdmi_csc_ycbcr_to_rgb[] = { + 0x0734, 0x04ad, 0x0000, 0x1c1b, + 0x1ddc, 0x04ad, 0x1f24, 0x0135, + 0x0000, 0x04ad, 0x087c, 0x1b77, +}; + +static void adihdmi_set_config_csc(struct adihdmi *adihdmi, + struct drm_connector *connector, + bool rgb) +{ + struct adihdmi_video_config config; + bool output_format_422, output_format_ycbcr; + unsigned int mode; + uint8_t infoframe[17]; + + if (adihdmi->edid) + config.hdmi_mode = drm_detect_hdmi_monitor(adihdmi->edid); + else + config.hdmi_mode = false; + + hdmi_avi_infoframe_init(&config.avi_infoframe); + + config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN; + + if (rgb) { + config.csc_enable = false; + config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB; + } else { + config.csc_scaling_factor = ADIHDMI_CSC_SCALING_4; + config.csc_coefficents = adihdmi_csc_ycbcr_to_rgb; + + if ((connector->display_info.color_formats & + DRM_COLOR_FORMAT_YCRCB422) && + config.hdmi_mode) { + config.csc_enable = false; + config.avi_infoframe.colorspace = + HDMI_COLORSPACE_YUV422; + } else { + config.csc_enable = true; + config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB; + } + } + + if (config.hdmi_mode) { + mode = ADIHDMI_HDMI_CFG_MODE_HDMI; + + switch (config.avi_infoframe.colorspace) { + case HDMI_COLORSPACE_YUV444: + output_format_422 = false; + output_format_ycbcr = true; + break; + case HDMI_COLORSPACE_YUV422: + output_format_422 = true; + output_format_ycbcr = true; + break; + default: + output_format_422 = false; + output_format_ycbcr = false; + break; + } + } else { + mode = ADIHDMI_HDMI_CFG_MODE_DVI; + output_format_422 = false; + output_format_ycbcr = false; + } + + adihdmi_packet_disable(adihdmi, ADIHDMI_INFOFRAME_PACKETS); + + adihdmi_set_colormap(adihdmi, config.csc_enable, + config.csc_coefficents, + config.csc_scaling_factor); + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_VIDEO_INPUT_CFG1, 0x81, + (output_format_422 << 7) | output_format_ycbcr); + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_HDCP_HDMI_CFG, + ADIHDMI_HDMI_CFG_MODE_MASK, mode); + + hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe, + sizeof(infoframe)); + + /* The AVI infoframe id is not configurable */ + regmap_bulk_write(adihdmi->regmap, ADIHDMI_REG_AVI_INFOFRAME_VERSION, + infoframe + 1, sizeof(infoframe) - 1); + + adihdmi_packet_enable(adihdmi, ADIHDMI_INFOFRAME_PACKETS); +} + +static void adihdmi_set_link_config(struct adihdmi *adihdmi, + const struct adihdmi_link_config *config) +{ + /* + * The input style values documented in the datasheet don't match the + * hardware register field values :-( + */ + static const unsigned int input_styles[4] = { 0, 2, 1, 3 }; + + unsigned int clock_delay; + unsigned int color_depth; + unsigned int input_id; + + clock_delay = (config->clock_delay + 1200) / 400; + color_depth = config->input_color_depth == 8 ? 3 + : (config->input_color_depth == 10 ? 1 : 2); + + /* TODO Support input ID 6 */ + if (config->input_colorspace != HDMI_COLORSPACE_YUV422) + input_id = config->input_clock == ADIHDMI_INPUT_CLOCK_DDR + ? 5 : 0; + else if (config->input_clock == ADIHDMI_INPUT_CLOCK_DDR) + input_id = config->embedded_sync ? 8 : 7; + else if (config->input_clock == ADIHDMI_INPUT_CLOCK_2X) + input_id = config->embedded_sync ? 4 : 3; + else + input_id = config->embedded_sync ? 2 : 1; + + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_I2C_FREQ_ID_CFG, 0xf, + input_id); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_VIDEO_INPUT_CFG1, 0x7e, + (color_depth << 4) | + (input_styles[config->input_style] << 2)); + regmap_write(adihdmi->regmap, ADIHDMI_REG_VIDEO_INPUT_CFG2, + config->input_justification << 3); + regmap_write(adihdmi->regmap, ADIHDMI_REG_TIMING_GEN_SEQ, + config->sync_pulse << 2); + + regmap_write(adihdmi->regmap, 0xba, clock_delay << 5); + + adihdmi->embedded_sync = config->embedded_sync; + adihdmi->hsync_polarity = config->hsync_polarity; + adihdmi->vsync_polarity = config->vsync_polarity; + adihdmi->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB; +} + +static void adihdmi_power_on(struct adihdmi *adihdmi) +{ + adihdmi->current_edid_segment = -1; + + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(0), + ADIHDMI_INT0_EDID_READY); + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(1), + ADIHDMI_INT1_DDC_ERROR); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER, + ADIHDMI_POWER_POWER_DOWN, 0); + + /* + * Per spec it is allowed to pulse the HDP signal to indicate that the + * EDID information has changed. Some monitors do this when they wakeup + * from standby or are enabled. When the HDP goes low the adihdmi is + * reset and the outputs are disabled which might cause the monitor to + * go to standby again. To avoid this we ignore the HDP pin for the + * first few seconds after enabling the output. + */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER2, + ADIHDMI_REG_POWER2_HDP_SRC_MASK, + ADIHDMI_REG_POWER2_HDP_SRC_NONE); + + /* + * Most of the registers are reset during power down or when HPD is low. + */ + regcache_sync(adihdmi->regmap); + + adihdmi->powered = true; +} + +static void adihdmi_power_off(struct adihdmi *adihdmi) +{ + /* TODO: setup additional power down modes */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER, + ADIHDMI_POWER_POWER_DOWN, + ADIHDMI_POWER_POWER_DOWN); + regcache_mark_dirty(adihdmi->regmap); + + adihdmi->powered = false; +} + +/* ----------------------------------------------------------------------------- + * Interrupt and hotplug detection + */ + +static bool adihdmi_hpd(struct adihdmi *adihdmi) +{ + unsigned int irq0; + int ret; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_INT(0), &irq0); + if (ret < 0) + return false; + + if (irq0 & ADIHDMI_INT0_HDP) { + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(0), + ADIHDMI_INT0_HDP); + return true; + } + + return false; +} + +static int adihdmi_irq_process(struct adihdmi *adihdmi) +{ + unsigned int irq0, irq1; + int ret; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_INT(0), &irq0); + if (ret < 0) + return ret; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_INT(1), &irq1); + if (ret < 0) + return ret; + + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(0), irq0); + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(1), irq1); + + if (irq0 & ADIHDMI_INT0_HDP) + drm_helper_hpd_irq_event(adihdmi->encoder->dev); + + if (irq0 & ADIHDMI_INT0_EDID_READY || irq1 & ADIHDMI_INT1_DDC_ERROR) { + adihdmi->edid_read = true; + + if (adihdmi->i2c_main->irq) + wake_up_all(&adihdmi->wq); + } + + return 0; +} + +static irqreturn_t adihdmi_irq_handler(int irq, void *devid) +{ + struct adihdmi *adihdmi = devid; + int ret; + + ret = adihdmi_irq_process(adihdmi); + return ret < 0 ? IRQ_NONE : IRQ_HANDLED; +} + +/* ----------------------------------------------------------------------------- + * EDID retrieval + */ + +static int adihdmi_wait_for_edid(struct adihdmi *adihdmi, int timeout) +{ + int ret; + + if (adihdmi->i2c_main->irq) { + ret = wait_event_interruptible_timeout(adihdmi->wq, + adihdmi->edid_read, msecs_to_jiffies(timeout)); + } else { + for (; timeout > 0; timeout -= 25) { + ret = adihdmi_irq_process(adihdmi); + if (ret < 0) + break; + + if (adihdmi->edid_read) + break; + + msleep(25); + } + } + + return adihdmi->edid_read ? 0 : -EIO; +} + +static int adihdmi_get_edid_block(void *data, u8 *buf, unsigned int block, + size_t len) +{ + struct adihdmi *adihdmi = data; + struct i2c_msg xfer[2]; + uint8_t offset; + unsigned int i; + int ret; + + if (len > 128) + return -EINVAL; + + if (adihdmi->current_edid_segment != block / 2) { + unsigned int status; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_DDC_STATUS, + &status); + if (ret < 0) + return ret; + + if (status != 2) { + adihdmi->edid_read = false; + regmap_write(adihdmi->regmap, ADIHDMI_REG_EDID_SEGMENT, + block); + ret = adihdmi_wait_for_edid(adihdmi, 200); + if (ret < 0) + return ret; + } + + /* Break this apart, hopefully more I2C controllers will + * support 64 byte transfers than 256 byte transfers + */ + + xfer[0].addr = adihdmi->i2c_edid->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = &offset; + xfer[1].addr = adihdmi->i2c_edid->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = 64; + xfer[1].buf = adihdmi->edid_buf; + + offset = 0; + + for (i = 0; i < 4; ++i) { + ret = i2c_transfer(adihdmi->i2c_edid->adapter, xfer, + ARRAY_SIZE(xfer)); + if (ret < 0) + return ret; + else if (ret != 2) + return -EIO; + + xfer[1].buf += 64; + offset += 64; + } + + adihdmi->current_edid_segment = block / 2; + } + + if (block % 2 == 0) + memcpy(buf, adihdmi->edid_buf, len); + else + memcpy(buf, adihdmi->edid_buf + 128, len); + + return 0; +} + +static int adihdmi_mode_valid(struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +/* ----------------------------------------------------------------------------- + * DT and private structure operations + */ + +#define conn_to_adihdmi2(x) \ + container_of(x, struct adihdmi2, connector); + +#define enc_to_adihdmi2(x) \ + container_of(x, struct adihdmi2, encoder); + +#define enc_to_adihdmi(x) \ + (&(container_of(x, struct adihdmi2, encoder)->base)) + +static int adihdmi_parse_dt(struct device_node *np, + struct adihdmi_link_config *config) +{ + memset(config, 0, sizeof(*config)); + + config->input_color_depth = 8; + + config->input_colorspace = HDMI_COLORSPACE_RGB; + //config->input_colorspace = HDMI_COLORSPACE_YUV422; + //config->input_colorspace = HDMI_COLORSPACE_YUV444; + + config->input_clock = ADIHDMI_INPUT_CLOCK_1X; + //config->input_clock = ADIHDMI_INPUT_CLOCK_2X; + //config->input_clock = ADIHDMI_INPUT_CLOCK_DDR; + + if (config->input_colorspace == HDMI_COLORSPACE_YUV422 || + config->input_clock != ADIHDMI_INPUT_CLOCK_1X) { + + config->input_style = 1; + //config->input_justification = ADIHDMI_INPUT_JUSTIFICATION_LEFT; + config->input_justification = ADIHDMI_INPUT_JUSTIFICATION_EVENLY; + //config->input_justification = ADIHDMI_INPUT_JUSTIFICATION_RIGHT; + + } else { + config->input_style = 1; + config->input_justification = ADIHDMI_INPUT_JUSTIFICATION_LEFT; + } + + config->clock_delay = 0; + config->embedded_sync = 0; + + /* Hardcode the sync pulse configurations for now. */ + config->sync_pulse = ADIHDMI_INPUT_SYNC_PULSE_NONE; + config->vsync_polarity = ADIHDMI_SYNC_POLARITY_PASSTHROUGH; + config->hsync_polarity = ADIHDMI_SYNC_POLARITY_PASSTHROUGH; + + return 0; +} + +static const int edid_i2c_addr = 0x7e; +static const int packet_i2c_addr = 0x70; +static const int cec_i2c_addr = 0x78; + +static int adihdmi_create(struct i2c_client *i2c, struct adihdmi *adihdmi) +{ + struct adihdmi_link_config link_config; + struct device *dev = &i2c->dev; + unsigned int val; + int ret; + + adihdmi->powered = false; + adihdmi->status = connector_status_disconnected; + + ret = adihdmi_parse_dt(NULL, &link_config); + if (ret) + { + pr_err("%s - %d - Bad parse\n", __FUNCTION__, __LINE__); + return -EINVAL; + } + + /* + * The power down GPIO is optional. If present, toggle it from active to + * inactive to wake up the encoder. + */ + adihdmi->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH); + if (IS_ERR(adihdmi->gpio_pd)) + { + pr_err("%s - %d - Bad PD GPIO\n", __FUNCTION__, __LINE__); + return PTR_ERR(adihdmi->gpio_pd); + } + + if (adihdmi->gpio_pd) { + mdelay(5); + gpiod_set_value_cansleep(adihdmi->gpio_pd, 0); + } + + adihdmi->regmap = devm_regmap_init_i2c(i2c, &adihdmi_regmap_config); + if (IS_ERR(adihdmi->regmap)) + { + pr_err("%s - %d - Bad reg map init\n", __FUNCTION__, __LINE__); + return PTR_ERR(adihdmi->regmap); + } + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_CHIP_REVISION, &val); + if (ret) + { + pr_err("%s - %d - Bad reg map read\n", __FUNCTION__, __LINE__); + return ret; + } + dev_dbg(dev, "Rev. %d\n", val); + + ret = regmap_register_patch(adihdmi->regmap, adihdmi_fixed_registers, + ARRAY_SIZE(adihdmi_fixed_registers)); + if (ret) + { + pr_err("%s - %d - Bad reg map patch\n", __FUNCTION__, __LINE__); + return ret; + } + + regmap_write(adihdmi->regmap, ADIHDMI_REG_EDID_I2C_ADDR, edid_i2c_addr); + regmap_write(adihdmi->regmap, ADIHDMI_REG_PACKET_I2C_ADDR, + packet_i2c_addr); + regmap_write(adihdmi->regmap, ADIHDMI_REG_CEC_I2C_ADDR, cec_i2c_addr); + adihdmi_packet_disable(adihdmi, 0xffff); + + adihdmi->i2c_main = i2c; + adihdmi->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1); + if (!adihdmi->i2c_edid) + { + pr_err("%s - %d - No mem for EDID\n", __FUNCTION__, __LINE__); + return -ENOMEM; + } + + if (i2c->irq) { + init_waitqueue_head(&adihdmi->wq); + + ret = devm_request_threaded_irq(dev, i2c->irq, NULL, + adihdmi_irq_handler, + IRQF_ONESHOT, dev_name(dev), + adihdmi); + if (ret) + { + pr_err("%s - %d - Bad IRQ thread request\n", __FUNCTION__, __LINE__); + goto err_i2c_unregister_device; + } + } + + /* CEC is unused for now */ + regmap_write(adihdmi->regmap, ADIHDMI_REG_CEC_CTRL, + ADIHDMI_CEC_CTRL_POWER_DOWN); + + adihdmi_power_off(adihdmi); + + adihdmi_set_link_config(adihdmi, &link_config); + + adihdmi_audio_setup(adihdmi); + + return 0; + +err_i2c_unregister_device: + i2c_unregister_device(adihdmi->i2c_edid); + + return ret; +} + +static void adihdmi_destroy(struct adihdmi *priv) +{ + i2c_unregister_device(priv->i2c_edid); +} + +/* ----------------------------------------------------------------------------- + * Encoder operations + */ + +static int adihdmi_encoder_get_modes(struct adihdmi *adihdmi, + struct drm_connector *connector) +{ + struct edid *edid; + unsigned int count; + + /* Reading the EDID only works if the device is powered */ + if (!adihdmi->powered) { + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(0), + ADIHDMI_INT0_EDID_READY); + regmap_write(adihdmi->regmap, ADIHDMI_REG_INT(1), + ADIHDMI_INT1_DDC_ERROR); + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER, + ADIHDMI_POWER_POWER_DOWN, 0); + adihdmi->current_edid_segment = -1; + } + + edid = drm_do_get_edid(connector, adihdmi_get_edid_block, adihdmi); + + if (!adihdmi->powered) + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER, + ADIHDMI_POWER_POWER_DOWN, + ADIHDMI_POWER_POWER_DOWN); + + kfree(adihdmi->edid); + adihdmi->edid = edid; + if (!edid) + { + pr_err("%s - %d - No EDID\n", __FUNCTION__, __LINE__); + return 0; + } + + drm_mode_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + + adihdmi_set_config_csc(adihdmi, connector, adihdmi->rgb); + + return count; +} + +static void adihdmi_encoder_dpms(struct drm_encoder *encoder, int mode) +{ + struct adihdmi2 *priv2 = enc_to_adihdmi2(encoder); + + if (mode == DRM_MODE_DPMS_ON) + adihdmi_power_on(&priv2->base); + else + adihdmi_power_off(&priv2->base); +} + + static enum drm_connector_status +adihdmi_encoder_detect(struct adihdmi *adihdmi, + struct drm_connector *connector) +{ + enum drm_connector_status status; + unsigned int val; + bool hpd; + int ret; + + ret = regmap_read(adihdmi->regmap, ADIHDMI_REG_STATUS, &val); + if (ret < 0) + { + pr_err("%s - %d - Disconnected\n", __FUNCTION__, __LINE__); + return connector_status_disconnected; + } + + if (val & ADIHDMI_STATUS_HPD) + status = connector_status_connected; + else + status = connector_status_disconnected; + + hpd = adihdmi_hpd(adihdmi); + + /* The chip resets itself when the cable is disconnected, so in case + * there is a pending HPD interrupt and the cable is connected there was + * at least one transition from disconnected to connected and the chip + * has to be reinitialized. */ + if (status == connector_status_connected && hpd && adihdmi->powered) { + regcache_mark_dirty(adihdmi->regmap); + adihdmi_power_on(adihdmi); + adihdmi_encoder_get_modes(adihdmi, connector); + if (adihdmi->status == connector_status_connected) + status = connector_status_disconnected; + } else { + /* Renable HDP sensing */ + regmap_update_bits(adihdmi->regmap, ADIHDMI_REG_POWER2, + ADIHDMI_REG_POWER2_HDP_SRC_MASK, + ADIHDMI_REG_POWER2_HDP_SRC_BOTH); + } + + adihdmi->status = status; + return status; +} + +static bool adihdmi_encoder_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static int adihdmi_encoder_mode_valid(struct drm_encoder *encoder, struct drm_display_mode *mode) +{ + return adihdmi_mode_valid(mode); +} + +static void adihdmi_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + unsigned int low_refresh_rate; + unsigned int hsync_polarity = 0; + unsigned int vsync_polarity = 0; + struct adihdmi *adihdmi = enc_to_adihdmi(encoder); + + if (adihdmi->embedded_sync) { + unsigned int hsync_offset, hsync_len; + unsigned int vsync_offset, vsync_len; + + hsync_offset = adj_mode->crtc_hsync_start - + adj_mode->crtc_hdisplay; + vsync_offset = adj_mode->crtc_vsync_start - + adj_mode->crtc_vdisplay; + hsync_len = adj_mode->crtc_hsync_end - + adj_mode->crtc_hsync_start; + vsync_len = adj_mode->crtc_vsync_end - + adj_mode->crtc_vsync_start; + + /* The hardware vsync generator has a off-by-one bug */ + vsync_offset += 1; + + regmap_write(adihdmi->regmap, ADIHDMI_REG_HSYNC_PLACEMENT_MSB, + ((hsync_offset >> 10) & 0x7) << 5); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(0), + (hsync_offset >> 2) & 0xff); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(1), + ((hsync_offset & 0x3) << 6) | + ((hsync_len >> 4) & 0x3f)); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(2), + ((hsync_len & 0xf) << 4) | + ((vsync_offset >> 6) & 0xf)); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(3), + ((vsync_offset & 0x3f) << 2) | + ((vsync_len >> 8) & 0x3)); + regmap_write(adihdmi->regmap, ADIHDMI_REG_SYNC_DECODER(4), + vsync_len & 0xff); + + hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC); + vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC); + } else { + enum adihdmi_sync_polarity mode_hsync_polarity; + enum adihdmi_sync_polarity mode_vsync_polarity; + + /** + * If the input signal is always low or always high we want to + * invert or let it passthrough depending on the polarity of the + * current mode. + **/ + if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC) + mode_hsync_polarity = ADIHDMI_SYNC_POLARITY_LOW; + else + mode_hsync_polarity = ADIHDMI_SYNC_POLARITY_HIGH; + + if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC) + mode_vsync_polarity = ADIHDMI_SYNC_POLARITY_LOW; + else + mode_vsync_polarity = ADIHDMI_SYNC_POLARITY_HIGH; + + if (adihdmi->hsync_polarity != mode_hsync_polarity && + adihdmi->hsync_polarity != + ADIHDMI_SYNC_POLARITY_PASSTHROUGH) + hsync_polarity = 1; + + if (adihdmi->vsync_polarity != mode_vsync_polarity && + adihdmi->vsync_polarity != + ADIHDMI_SYNC_POLARITY_PASSTHROUGH) + vsync_polarity = 1; + } + + if (mode->vrefresh <= 24000) + low_refresh_rate = ADIHDMI_LOW_REFRESH_RATE_24HZ; + else if (mode->vrefresh <= 25000) + low_refresh_rate = ADIHDMI_LOW_REFRESH_RATE_25HZ; + else if (mode->vrefresh <= 30000) + low_refresh_rate = ADIHDMI_LOW_REFRESH_RATE_30HZ; + else + low_refresh_rate = ADIHDMI_LOW_REFRESH_RATE_NONE; + + regmap_update_bits(adihdmi->regmap, 0xfb, + 0x6, low_refresh_rate << 1); + regmap_update_bits(adihdmi->regmap, 0x17, + 0x60, (vsync_polarity << 6) | (hsync_polarity << 5)); + + /* + * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is + * supposed to give better results. + */ + + adihdmi->f_tmds = mode->clock; +} + +static void adihdmi_encoder_restore(struct drm_encoder *encoder) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); +} + +static void adihdmi_encoder_save(struct drm_encoder *encoder) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); +} + +static void adihdmi_encoder_prepare(struct drm_encoder *encoder) +{ + adihdmi_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); +} + +static void adihdmi_encoder_commit(struct drm_encoder *encoder) +{ + adihdmi_encoder_dpms(encoder, DRM_MODE_DPMS_ON); +} + +static struct drm_encoder_helper_funcs adihdmi_encoder_helper_funcs = { + .dpms = adihdmi_encoder_dpms, + .save = adihdmi_encoder_save, + .restore = adihdmi_encoder_restore, + .mode_fixup = adihdmi_encoder_mode_fixup, + .prepare = adihdmi_encoder_prepare, + .commit = adihdmi_encoder_commit, + .mode_set = adihdmi_encoder_mode_set, +}; + +static void adihdmi_encoder_destroy(struct drm_encoder *encoder) +{ + struct adihdmi2 *priv = enc_to_adihdmi2(encoder); + + adihdmi_destroy(&priv->base); + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs adihdmi_encoder_funcs = { + .destroy = adihdmi_encoder_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Slave operations + */ + +static int adihdmi_encoder_slave_create_resources(struct drm_encoder *encoder, struct drm_connector *connector) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); + return 0; +} + +static void adihdmi_encoder_slave_destroy(struct drm_encoder *encoder) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); +} + + static enum drm_connector_status +adihdmi_encoder_slave_detect(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + return adihdmi_encoder_detect(enc_to_adihdmi(encoder), + connector); +} + +static int adihdmi_encoder_slave_get_modes(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + return adihdmi_encoder_get_modes(enc_to_adihdmi(encoder), + connector); +} + + +static void adihdmi_encoder_slave_set_config(struct drm_encoder *encoder, void *params) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); +} + +static int adihdmi_encoder_set_property(struct drm_encoder *encoder, struct drm_connector *connector, struct drm_property *property, uint64_t val) +{ + pr_debug("%s - %d\n", __FUNCTION__, __LINE__); + return 0; +} + +static struct drm_encoder_slave_funcs adihdmi_encoder_slave_funcs = { + .create_resources = adihdmi_encoder_slave_create_resources, + .destroy = adihdmi_encoder_slave_destroy, + .detect = adihdmi_encoder_slave_detect, + .dpms = adihdmi_encoder_dpms, + .get_modes = adihdmi_encoder_slave_get_modes, + .mode_fixup = adihdmi_encoder_mode_fixup, + .mode_set = adihdmi_encoder_mode_set, + .mode_valid = adihdmi_encoder_mode_valid, + .restore = adihdmi_encoder_restore, + .save = adihdmi_encoder_save, + .set_config = adihdmi_encoder_slave_set_config, + .set_property = adihdmi_encoder_set_property, +}; + +/* ----------------------------------------------------------------------------- + * Connector operations + */ + +static int adihdmi_connector_get_modes(struct drm_connector *connector) +{ + struct adihdmi2 *priv = conn_to_adihdmi2(connector); + + return adihdmi_encoder_get_modes(&priv->base, connector); +} + +static int adihdmi_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + return adihdmi_mode_valid(mode); +} + + static struct drm_encoder * +adihdmi_connector_best_encoder(struct drm_connector *connector) +{ + struct adihdmi2 *priv = conn_to_adihdmi2(connector); + + return &priv->encoder; +} + +static struct drm_connector_helper_funcs adihdmi_connector_helper_funcs = { + .get_modes = adihdmi_connector_get_modes, + .mode_valid = adihdmi_connector_mode_valid, + .best_encoder = adihdmi_connector_best_encoder, +}; + + static enum drm_connector_status +adihdmi_connector_detect(struct drm_connector *connector, bool force) +{ + struct adihdmi2 *priv = conn_to_adihdmi2(connector); + + return adihdmi_encoder_detect(&priv->base, connector); +} + +static void adihdmi_connector_destroy(struct drm_connector *connector) +{ + drm_connector_unregister(connector); + drm_connector_cleanup(connector); +} + +static struct drm_connector_funcs adihdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .fill_modes = drm_helper_probe_single_connector_modes, + .detect = adihdmi_connector_detect, + .destroy = adihdmi_connector_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Component operations + */ + +static int adihdmi_bind(struct device *dev, struct device *master, void *data) +{ + struct i2c_client *client = to_i2c_client(dev); + struct drm_device *drm = data; + struct adihdmi2 *priv; + uint32_t crtcs = 0; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + { + pr_err("%s - %d - No memory for ADIHDMI\n", __FUNCTION__, __LINE__); + return -ENOMEM; + } + + dev_set_drvdata(dev, priv); + + if (dev->of_node) + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); + + /* If no CRTCs were found, fall back to our old behaviour */ + if (crtcs == 0) { + dev_warn(dev, "Falling back to first CRTC\n"); + crtcs = 1 << 0; + } + + priv->base.encoder = &priv->encoder; + priv->connector.interlace_allowed = 1; + priv->encoder.possible_crtcs = crtcs; + + ret = adihdmi_create(client, &priv->base); + if (ret) + return ret; + + drm_encoder_helper_add(&priv->encoder, &adihdmi_encoder_helper_funcs); + ret = drm_encoder_init(drm, &priv->encoder, &adihdmi_encoder_funcs, + DRM_MODE_ENCODER_TMDS); + if (ret) + goto err_encoder; + + drm_connector_helper_add(&priv->connector, + &adihdmi_connector_helper_funcs); + ret = drm_connector_init(drm, &priv->connector, + &adihdmi_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); + if (ret) + goto err_connector; + + ret = drm_connector_register(&priv->connector); + if (ret) + goto err_sysfs; + + priv->connector.encoder = &priv->encoder; + drm_mode_connector_attach_encoder(&priv->connector, &priv->encoder); + + return 0; + +err_sysfs: + drm_connector_cleanup(&priv->connector); +err_connector: + drm_encoder_cleanup(&priv->encoder); +err_encoder: + adihdmi_destroy(&priv->base); + return ret; + + +} + +static void adihdmi_unbind(struct device *dev, struct device *master, void *data) +{ + struct adihdmi2 *priv = dev_get_drvdata(dev); + + drm_connector_cleanup(&priv->connector); + drm_encoder_cleanup(&priv->encoder); + adihdmi_destroy(&priv->base); +} + +static const struct component_ops adihdmi_ops = +{ + .bind = adihdmi_bind, + .unbind = adihdmi_unbind, +}; + +/* ----------------------------------------------------------------------------- + * Init operations + */ + +static int adihdmi_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + return component_add(&i2c->dev, &adihdmi_ops); +} + +static int adihdmi_remove(struct i2c_client *i2c) +{ + component_del(&i2c->dev, &adihdmi_ops); + + return 0; +} + +static int adihdmi_encoder_init(struct i2c_client *i2c, struct drm_device *dev, + struct drm_encoder_slave *encoder_slave) +{ + + struct adihdmi *adihdmi; + int ret; + + adihdmi = kzalloc(sizeof(*adihdmi), GFP_KERNEL); + if (!adihdmi) + return -ENOMEM; + + adihdmi->encoder = &encoder_slave->base; + + ret = adihdmi_create(i2c, adihdmi); + if (ret) { + kfree(adihdmi); + return ret; + } + + encoder_slave->slave_priv = adihdmi; + encoder_slave->slave_funcs = &adihdmi_encoder_slave_funcs; + + return 0; +} + +static const struct i2c_device_id adihdmi_i2c_ids[] = { + { "adv7511", 0 }, + { "adv7511w", 0 }, + { "adv7513", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adihdmi_i2c_ids); + +static const struct of_device_id adihdmi_of_ids[] = { + { .compatible = "adi,adv7511", }, + { .compatible = "adi,adv7511w", }, + { .compatible = "adi,adv7513", }, + { } +}; +MODULE_DEVICE_TABLE(of, adihdmi_of_ids); + +static struct drm_i2c_encoder_driver adihdmi_driver = { + .i2c_driver = { + .driver = { + .name = "adihdmi", + .of_match_table = adihdmi_of_ids, + }, + .id_table = adihdmi_i2c_ids, + .probe = adihdmi_probe, + .remove = adihdmi_remove, + }, + + .encoder_init = adihdmi_encoder_init, +}; + +static int __init adihdmi_init(void) +{ + return drm_i2c_encoder_register(THIS_MODULE, &adihdmi_driver); +} +module_init(adihdmi_init); + +static void __exit adihdmi_exit(void) +{ + drm_i2c_encoder_unregister(&adihdmi_driver); +} +module_exit(adihdmi_exit); + +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_DESCRIPTION("ADIHDMI HDMI transmitter driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 66792e7..505e921 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -22,6 +22,14 @@ if IIO_BUFFER source "drivers/iio/buffer/Kconfig" endif # IIO_BUFFER +config IIO_CONFIGFS + tristate "Enable IIO configuration via configfs" + select CONFIGFS_FS + help + This allows configuring various IIO bits through configfs + (e.g. software triggers). For more info see + Documentation/iio/iio_configfs.txt. + config IIO_TRIGGER bool "Enable triggered sampling support" help @@ -38,6 +46,14 @@ config IIO_CONSUMERS_PER_TRIGGER This value controls the maximum number of consumers that a given trigger may handle. Default is 2. +config IIO_SW_TRIGGER + tristate "Enable software triggers support" + select IIO_CONFIGFS + help + Provides IIO core support for software triggers. A software + trigger can be created via configfs or directly by a driver + using the API provided. + config IIO_TRIGGERED_EVENT tristate select IIO_TRIGGER @@ -50,8 +66,10 @@ source "drivers/iio/amplifiers/Kconfig" source "drivers/iio/chemical/Kconfig" source "drivers/iio/common/Kconfig" source "drivers/iio/dac/Kconfig" +source "drivers/iio/dummy/Kconfig" source "drivers/iio/frequency/Kconfig" source "drivers/iio/gyro/Kconfig" +source "drivers/iio/health/Kconfig" source "drivers/iio/humidity/Kconfig" source "drivers/iio/imu/Kconfig" source "drivers/iio/light/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index aeca726..20f6490 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -7,6 +7,8 @@ industrialio-y := industrialio-core.o industrialio-event.o inkern.o industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o +obj-$(CONFIG_IIO_CONFIGFS) += industrialio-configfs.o +obj-$(CONFIG_IIO_SW_TRIGGER) += industrialio-sw-trigger.o obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o obj-y += accel/ @@ -16,8 +18,10 @@ obj-y += buffer/ obj-y += chemical/ obj-y += common/ obj-y += dac/ +obj-y += dummy/ obj-y += gyro/ obj-y += frequency/ +obj-y += health/ obj-y += humidity/ obj-y += imu/ obj-y += light/ diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 16cc5c6..b0d3ecf 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS help Say yes here to build support for STMicroelectronics accelerometers: LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, - LIS331DLH, LSM303DL, LSM303DLM, LSM330. + LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12. This driver can also be built as a module. If so, these modules will be created: @@ -107,6 +107,35 @@ config KXCJK1013 To compile this driver as a module, choose M here: the module will be called kxcjk-1013. +config MMA7455 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config MMA7455_I2C + tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver" + depends on I2C + select MMA7455 + select REGMAP_I2C + help + Say yes here to build support for the Freescale MMA7455L and + MMA7456L 3-axis accelerometer. + + To compile this driver as a module, choose M here: the module + will be called mma7455_i2c. + +config MMA7455_SPI + tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver" + depends on SPI_MASTER + select MMA7455 + select REGMAP_SPI + help + Say yes here to build support for the Freescale MMA7455L and + MMA7456L 3-axis accelerometer. + + To compile this driver as a module, choose M here: the module + will be called mma7455_spi. + config MMA8452 tristate "Freescale MMA8452Q and similar Accelerometers Driver" depends on I2C @@ -114,7 +143,7 @@ config MMA8452 select IIO_TRIGGERED_BUFFER help Say yes here to build support for the following Freescale 3-axis - accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. + accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. To compile this driver as a module, choose M here: the module will be called mma8452. @@ -158,6 +187,17 @@ config MXC4005 To compile this driver as a module, choose M. The module will be called mxc4005. +config MXC6255 + tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for the Memsic MXC6255 Orientation + Sensing Accelerometer Driver. + + To compile this driver as a module, choose M here: the module will be + called mxc6255. + config STK8312 tristate "Sensortek STK8312 3-Axis Accelerometer Driver" depends on I2C diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 7925f16..71b6794 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -10,6 +10,11 @@ obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o + +obj-$(CONFIG_MMA7455) += mma7455_core.o +obj-$(CONFIG_MMA7455_I2C) += mma7455_i2c.o +obj-$(CONFIG_MMA7455_SPI) += mma7455_spi.o + obj-$(CONFIG_MMA8452) += mma8452.o obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o @@ -17,6 +22,7 @@ obj-$(CONFIG_MMA9551) += mma9551.o obj-$(CONFIG_MMA9553) += mma9553.o obj-$(CONFIG_MXC4005) += mxc4005.o +obj-$(CONFIG_MXC6255) += mxc6255.o obj-$(CONFIG_STK8312) += stk8312.o obj-$(CONFIG_STK8BA50) += stk8ba50.o diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index 2d33f1e..2072a31 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -547,7 +547,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, { int ret; int axis = chan->scan_index; - unsigned int raw_val; + __le16 raw_val; mutex_lock(&data->mutex); ret = bmc150_accel_set_power_state(data, true); @@ -557,14 +557,14 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, } ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis), - &raw_val, 2); + &raw_val, sizeof(raw_val)); if (ret < 0) { dev_err(data->dev, "Error reading axis %d\n", axis); bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } - *val = sign_extend32(raw_val >> chan->scan_type.shift, + *val = sign_extend32(le16_to_cpu(raw_val) >> chan->scan_type.shift, chan->scan_type.realbits - 1); ret = bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); @@ -988,6 +988,7 @@ static const struct iio_event_spec bmc150_accel_event = { .realbits = (bits), \ .storagebits = 16, \ .shift = 16 - (bits), \ + .endianness = IIO_LE, \ }, \ .event_spec = &bmc150_accel_event, \ .num_event_specs = 1 \ @@ -1623,24 +1624,22 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, } } - ret = iio_device_register(indio_dev); - if (ret < 0) { - dev_err(dev, "Unable to register iio device\n"); - goto err_trigger_unregister; - } - ret = pm_runtime_set_active(dev); if (ret) - goto err_iio_unregister; + goto err_trigger_unregister; pm_runtime_enable(dev); pm_runtime_set_autosuspend_delay(dev, BMC150_AUTO_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(dev); + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(dev, "Unable to register iio device\n"); + goto err_trigger_unregister; + } + return 0; -err_iio_unregister: - iio_device_unregister(indio_dev); err_trigger_unregister: bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); err_buffer_cleanup: @@ -1655,12 +1654,12 @@ int bmc150_accel_core_remove(struct device *dev) struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_accel_data *data = iio_priv(indio_dev); + iio_device_unregister(indio_dev); + pm_runtime_disable(data->dev); pm_runtime_set_suspended(data->dev); pm_runtime_put_noidle(data->dev); - iio_device_unregister(indio_dev); - bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); iio_triggered_buffer_cleanup(indio_dev); diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 18c1b06..edec1d0 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -1264,25 +1264,23 @@ static int kxcjk1013_probe(struct i2c_client *client, goto err_trigger_unregister; } - ret = iio_device_register(indio_dev); - if (ret < 0) { - dev_err(&client->dev, "unable to register iio device\n"); - goto err_buffer_cleanup; - } - ret = pm_runtime_set_active(&client->dev); if (ret) - goto err_iio_unregister; + goto err_buffer_cleanup; pm_runtime_enable(&client->dev); pm_runtime_set_autosuspend_delay(&client->dev, KXCJK1013_SLEEP_DELAY_MS); pm_runtime_use_autosuspend(&client->dev); + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "unable to register iio device\n"); + goto err_buffer_cleanup; + } + return 0; -err_iio_unregister: - iio_device_unregister(indio_dev); err_buffer_cleanup: if (data->dready_trig) iio_triggered_buffer_cleanup(indio_dev); @@ -1302,12 +1300,12 @@ static int kxcjk1013_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); struct kxcjk1013_data *data = iio_priv(indio_dev); + iio_device_unregister(indio_dev); + pm_runtime_disable(&client->dev); pm_runtime_set_suspended(&client->dev); pm_runtime_put_noidle(&client->dev); - iio_device_unregister(indio_dev); - if (data->dready_trig) { iio_triggered_buffer_cleanup(indio_dev); iio_trigger_unregister(data->dready_trig); diff --git b/drivers/iio/accel/mma7455.h b/drivers/iio/accel/mma7455.h new file mode 100644 index 0000000..2b1152c --- /dev/null +++ b/drivers/iio/accel/mma7455.h @@ -0,0 +1,19 @@ +/* + * IIO accel driver for Freescale MMA7455L 3-axis 10-bit accelerometer + * Copyright 2015 Joachim Eastwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MMA7455_H +#define __MMA7455_H + +extern const struct regmap_config mma7455_core_regmap; + +int mma7455_core_probe(struct device *dev, struct regmap *regmap, + const char *name); +int mma7455_core_remove(struct device *dev); + +#endif diff --git b/drivers/iio/accel/mma7455_core.c b/drivers/iio/accel/mma7455_core.c new file mode 100644 index 0000000..c633cc2 --- /dev/null +++ b/drivers/iio/accel/mma7455_core.c @@ -0,0 +1,311 @@ +/* + * IIO accel core driver for Freescale MMA7455L 3-axis 10-bit accelerometer + * Copyright 2015 Joachim Eastwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * UNSUPPORTED hardware features: + * - 8-bit mode with different scales + * - INT1/INT2 interrupts + * - Offset calibration + * - Events + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mma7455.h" + +#define MMA7455_REG_XOUTL 0x00 +#define MMA7455_REG_XOUTH 0x01 +#define MMA7455_REG_YOUTL 0x02 +#define MMA7455_REG_YOUTH 0x03 +#define MMA7455_REG_ZOUTL 0x04 +#define MMA7455_REG_ZOUTH 0x05 +#define MMA7455_REG_STATUS 0x09 +#define MMA7455_STATUS_DRDY BIT(0) +#define MMA7455_REG_WHOAMI 0x0f +#define MMA7455_WHOAMI_ID 0x55 +#define MMA7455_REG_MCTL 0x16 +#define MMA7455_MCTL_MODE_STANDBY 0x00 +#define MMA7455_MCTL_MODE_MEASURE 0x01 +#define MMA7455_REG_CTL1 0x18 +#define MMA7455_CTL1_DFBW_MASK BIT(7) +#define MMA7455_CTL1_DFBW_125HZ BIT(7) +#define MMA7455_CTL1_DFBW_62_5HZ 0 +#define MMA7455_REG_TW 0x1e + +/* + * When MMA7455 is used in 10-bit it has a fullscale of -8g + * corresponding to raw value -512. The userspace interface + * uses m/s^2 and we declare micro units. + * So scale factor is given by: + * g * 8 * 1e6 / 512 = 153228.90625, with g = 9.80665 + */ +#define MMA7455_10BIT_SCALE 153229 + +struct mma7455_data { + struct regmap *regmap; + struct device *dev; +}; + +static int mma7455_drdy(struct mma7455_data *mma7455) +{ + unsigned int reg; + int tries = 3; + int ret; + + while (tries-- > 0) { + ret = regmap_read(mma7455->regmap, MMA7455_REG_STATUS, ®); + if (ret) + return ret; + + if (reg & MMA7455_STATUS_DRDY) + return 0; + + msleep(20); + } + + dev_warn(mma7455->dev, "data not ready\n"); + + return -EIO; +} + +static irqreturn_t mma7455_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct mma7455_data *mma7455 = iio_priv(indio_dev); + u8 buf[16]; /* 3 x 16-bit channels + padding + ts */ + int ret; + + ret = mma7455_drdy(mma7455); + if (ret) + goto done; + + ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL, buf, + sizeof(__le16) * 3); + if (ret) + goto done; + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int mma7455_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mma7455_data *mma7455 = iio_priv(indio_dev); + unsigned int reg; + __le16 data; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + + ret = mma7455_drdy(mma7455); + if (ret) + return ret; + + ret = regmap_bulk_read(mma7455->regmap, chan->address, &data, + sizeof(data)); + if (ret) + return ret; + + *val = sign_extend32(le16_to_cpu(data), 9); + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = MMA7455_10BIT_SCALE; + + return IIO_VAL_INT_PLUS_MICRO; + + case IIO_CHAN_INFO_SAMP_FREQ: + ret = regmap_read(mma7455->regmap, MMA7455_REG_CTL1, ®); + if (ret) + return ret; + + if (reg & MMA7455_CTL1_DFBW_MASK) + *val = 250; + else + *val = 125; + + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static int mma7455_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct mma7455_data *mma7455 = iio_priv(indio_dev); + int i; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + if (val == 250 && val2 == 0) + i = MMA7455_CTL1_DFBW_125HZ; + else if (val == 125 && val2 == 0) + i = MMA7455_CTL1_DFBW_62_5HZ; + else + return -EINVAL; + + return regmap_update_bits(mma7455->regmap, MMA7455_REG_CTL1, + MMA7455_CTL1_DFBW_MASK, i); + + case IIO_CHAN_INFO_SCALE: + /* In 10-bit mode there is only one scale available */ + if (val == 0 && val2 == MMA7455_10BIT_SCALE) + return 0; + break; + } + + return -EINVAL; +} + +static IIO_CONST_ATTR(sampling_frequency_available, "125 250"); + +static struct attribute *mma7455_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group mma7455_group = { + .attrs = mma7455_attributes, +}; + +static const struct iio_info mma7455_info = { + .attrs = &mma7455_group, + .read_raw = mma7455_read_raw, + .write_raw = mma7455_write_raw, + .driver_module = THIS_MODULE, +}; + +#define MMA7455_CHANNEL(axis, idx) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .address = MMA7455_REG_##axis##OUTL,\ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 10, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + +static const struct iio_chan_spec mma7455_channels[] = { + MMA7455_CHANNEL(X, 0), + MMA7455_CHANNEL(Y, 1), + MMA7455_CHANNEL(Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const unsigned long mma7455_scan_masks[] = {0x7, 0}; + +const struct regmap_config mma7455_core_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MMA7455_REG_TW, +}; +EXPORT_SYMBOL_GPL(mma7455_core_regmap); + +int mma7455_core_probe(struct device *dev, struct regmap *regmap, + const char *name) +{ + struct mma7455_data *mma7455; + struct iio_dev *indio_dev; + unsigned int reg; + int ret; + + ret = regmap_read(regmap, MMA7455_REG_WHOAMI, ®); + if (ret) { + dev_err(dev, "unable to read reg\n"); + return ret; + } + + if (reg != MMA7455_WHOAMI_ID) { + dev_err(dev, "device id mismatch\n"); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(dev, sizeof(*mma7455)); + if (!indio_dev) + return -ENOMEM; + + dev_set_drvdata(dev, indio_dev); + mma7455 = iio_priv(indio_dev); + mma7455->regmap = regmap; + mma7455->dev = dev; + + indio_dev->info = &mma7455_info; + indio_dev->name = name; + indio_dev->dev.parent = dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mma7455_channels; + indio_dev->num_channels = ARRAY_SIZE(mma7455_channels); + indio_dev->available_scan_masks = mma7455_scan_masks; + + regmap_write(mma7455->regmap, MMA7455_REG_MCTL, + MMA7455_MCTL_MODE_MEASURE); + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + mma7455_trigger_handler, NULL); + if (ret) { + dev_err(dev, "unable to setup triggered buffer\n"); + return ret; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "unable to register device\n"); + iio_triggered_buffer_cleanup(indio_dev); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mma7455_core_probe); + +int mma7455_core_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct mma7455_data *mma7455 = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + regmap_write(mma7455->regmap, MMA7455_REG_MCTL, + MMA7455_MCTL_MODE_STANDBY); + + return 0; +} +EXPORT_SYMBOL_GPL(mma7455_core_remove); + +MODULE_AUTHOR("Joachim Eastwood "); +MODULE_DESCRIPTION("Freescale MMA7455L core accelerometer driver"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/accel/mma7455_i2c.c b/drivers/iio/accel/mma7455_i2c.c new file mode 100644 index 0000000..3cab5fb --- /dev/null +++ b/drivers/iio/accel/mma7455_i2c.c @@ -0,0 +1,56 @@ +/* + * IIO accel I2C driver for Freescale MMA7455L 3-axis 10-bit accelerometer + * Copyright 2015 Joachim Eastwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include "mma7455.h" + +static int mma7455_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const char *name = NULL; + + regmap = devm_regmap_init_i2c(i2c, &mma7455_core_regmap); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + if (id) + name = id->name; + + return mma7455_core_probe(&i2c->dev, regmap, name); +} + +static int mma7455_i2c_remove(struct i2c_client *i2c) +{ + return mma7455_core_remove(&i2c->dev); +} + +static const struct i2c_device_id mma7455_i2c_ids[] = { + { "mma7455", 0 }, + { "mma7456", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mma7455_i2c_ids); + +static struct i2c_driver mma7455_i2c_driver = { + .probe = mma7455_i2c_probe, + .remove = mma7455_i2c_remove, + .id_table = mma7455_i2c_ids, + .driver = { + .name = "mma7455-i2c", + }, +}; +module_i2c_driver(mma7455_i2c_driver); + +MODULE_AUTHOR("Joachim Eastwood "); +MODULE_DESCRIPTION("Freescale MMA7455L I2C accelerometer driver"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/accel/mma7455_spi.c b/drivers/iio/accel/mma7455_spi.c new file mode 100644 index 0000000..79df8f2 --- /dev/null +++ b/drivers/iio/accel/mma7455_spi.c @@ -0,0 +1,52 @@ +/* + * IIO accel SPI driver for Freescale MMA7455L 3-axis 10-bit accelerometer + * Copyright 2015 Joachim Eastwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include "mma7455.h" + +static int mma7455_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct regmap *regmap; + + regmap = devm_regmap_init_spi(spi, &mma7455_core_regmap); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return mma7455_core_probe(&spi->dev, regmap, id->name); +} + +static int mma7455_spi_remove(struct spi_device *spi) +{ + return mma7455_core_remove(&spi->dev); +} + +static const struct spi_device_id mma7455_spi_ids[] = { + { "mma7455", 0 }, + { "mma7456", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, mma7455_spi_ids); + +static struct spi_driver mma7455_spi_driver = { + .probe = mma7455_spi_probe, + .remove = mma7455_spi_remove, + .id_table = mma7455_spi_ids, + .driver = { + .name = "mma7455-spi", + }, +}; +module_spi_driver(mma7455_spi_driver); + +MODULE_AUTHOR("Joachim Eastwood "); +MODULE_DESCRIPTION("Freescale MMA7455L SPI accelerometer driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 1eccc2d..7f4994f 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1,6 +1,7 @@ /* * mma8452.c - Support for following Freescale 3-axis accelerometers: * + * MMA8451Q (14 bit) * MMA8452Q (12 bit) * MMA8453Q (10 bit) * MMA8652FC (12 bit) @@ -15,7 +16,7 @@ * * 7-bit I2C slave address 0x1c/0x1d (pin selectable) * - * TODO: orientation / freefall events, autosleep + * TODO: orientation events, autosleep */ #include @@ -29,6 +30,7 @@ #include #include #include +#include #define MMA8452_STATUS 0x00 #define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0)) @@ -57,7 +59,6 @@ #define MMA8452_FF_MT_COUNT 0x18 #define MMA8452_TRANSIENT_CFG 0x1d #define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0) -#define MMA8452_TRANSIENT_CFG_CHAN(chan) BIT(chan + 1) #define MMA8452_TRANSIENT_CFG_ELE BIT(4) #define MMA8452_TRANSIENT_SRC 0x1e #define MMA8452_TRANSIENT_SRC_XTRANSE BIT(1) @@ -85,8 +86,9 @@ #define MMA8452_INT_FF_MT BIT(2) #define MMA8452_INT_TRANS BIT(5) -#define MMA8452_DEVICE_ID 0x2a -#define MMA8453_DEVICE_ID 0x3a +#define MMA8451_DEVICE_ID 0x1a +#define MMA8452_DEVICE_ID 0x2a +#define MMA8453_DEVICE_ID 0x3a #define MMA8652_DEVICE_ID 0x4a #define MMA8653_DEVICE_ID 0x5a @@ -143,6 +145,13 @@ struct mma_chip_info { u8 ev_count; }; +enum { + idx_x, + idx_y, + idx_z, + idx_ts, +}; + static int mma8452_drdy(struct mma8452_data *data) { int tries = 150; @@ -409,6 +418,51 @@ fail: return ret; } +/* returns >0 if in freefall mode, 0 if not or <0 if an error occured */ +static int mma8452_freefall_mode_enabled(struct mma8452_data *data) +{ + int val; + const struct mma_chip_info *chip = data->chip_info; + + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + return !(val & MMA8452_FF_MT_CFG_OAE); +} + +static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state) +{ + int val; + const struct mma_chip_info *chip = data->chip_info; + + if ((state && mma8452_freefall_mode_enabled(data)) || + (!state && !(mma8452_freefall_mode_enabled(data)))) + return 0; + + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + if (state) { + val |= BIT(idx_x + chip->ev_cfg_chan_shift); + val |= BIT(idx_y + chip->ev_cfg_chan_shift); + val |= BIT(idx_z + chip->ev_cfg_chan_shift); + val &= ~MMA8452_FF_MT_CFG_OAE; + } else { + val &= ~BIT(idx_x + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_y + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_z + chip->ev_cfg_chan_shift); + val |= MMA8452_FF_MT_CFG_OAE; + } + + val = mma8452_change_config(data, chip->ev_cfg, val); + if (val) + return val; + + return 0; +} + static int mma8452_set_hp_filter_frequency(struct mma8452_data *data, int val, int val2) { @@ -602,12 +656,22 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev, const struct mma_chip_info *chip = data->chip_info; int ret; - ret = i2c_smbus_read_byte_data(data->client, - data->chip_info->ev_cfg); - if (ret < 0) - return ret; + switch (dir) { + case IIO_EV_DIR_FALLING: + return mma8452_freefall_mode_enabled(data); + case IIO_EV_DIR_RISING: + if (mma8452_freefall_mode_enabled(data)) + return 0; + + ret = i2c_smbus_read_byte_data(data->client, + data->chip_info->ev_cfg); + if (ret < 0) + return ret; - return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift)); + return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift)); + default: + return -EINVAL; + } } static int mma8452_write_event_config(struct iio_dev *indio_dev, @@ -620,19 +684,35 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev, const struct mma_chip_info *chip = data->chip_info; int val; - val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); - if (val < 0) - return val; + switch (dir) { + case IIO_EV_DIR_FALLING: + return mma8452_set_freefall_mode(data, state); + case IIO_EV_DIR_RISING: + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + if (state) { + if (mma8452_freefall_mode_enabled(data)) { + val &= ~BIT(idx_x + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_y + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_z + chip->ev_cfg_chan_shift); + val |= MMA8452_FF_MT_CFG_OAE; + } + val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift); + } else { + if (mma8452_freefall_mode_enabled(data)) + return 0; - if (state) - val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift); - else - val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift); + val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift); + } - val |= chip->ev_cfg_ele; - val |= MMA8452_FF_MT_CFG_OAE; + val |= chip->ev_cfg_ele; - return mma8452_change_config(data, chip->ev_cfg, val); + return mma8452_change_config(data, chip->ev_cfg, val); + default: + return -EINVAL; + } } static void mma8452_transient_interrupt(struct iio_dev *indio_dev) @@ -645,6 +725,16 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev) if (src < 0) return; + if (mma8452_freefall_mode_enabled(data)) { + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_AND_Y_AND_Z, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_FALLING), + ts); + return; + } + if (src & data->chip_info->ev_src_xe) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, @@ -738,6 +828,27 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, return 0; } +static const struct iio_event_spec mma8452_freefall_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) | + BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB) + }, +}; + +static const struct iio_event_spec mma8652_freefall_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) + }, +}; + static const struct iio_event_spec mma8452_transient_event[] = { { .type = IIO_EV_TYPE_MAG, @@ -774,6 +885,24 @@ static struct attribute_group mma8452_event_attribute_group = { .attrs = mma8452_event_attributes, }; +#define MMA8452_FREEFALL_CHANNEL(modifier) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = modifier, \ + .scan_index = -1, \ + .event_spec = mma8452_freefall_event, \ + .num_event_specs = ARRAY_SIZE(mma8452_freefall_event), \ +} + +#define MMA8652_FREEFALL_CHANNEL(modifier) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = modifier, \ + .scan_index = -1, \ + .event_spec = mma8652_freefall_event, \ + .num_event_specs = ARRAY_SIZE(mma8652_freefall_event), \ +} + #define MMA8452_CHANNEL(axis, idx, bits) { \ .type = IIO_ACCEL, \ .modified = 1, \ @@ -815,35 +944,48 @@ static struct attribute_group mma8452_event_attribute_group = { .num_event_specs = ARRAY_SIZE(mma8452_motion_event), \ } +static const struct iio_chan_spec mma8451_channels[] = { + MMA8452_CHANNEL(X, idx_x, 14), + MMA8452_CHANNEL(Y, idx_y, 14), + MMA8452_CHANNEL(Z, idx_z, 14), + IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), +}; + static const struct iio_chan_spec mma8452_channels[] = { - MMA8452_CHANNEL(X, 0, 12), - MMA8452_CHANNEL(Y, 1, 12), - MMA8452_CHANNEL(Z, 2, 12), - IIO_CHAN_SOFT_TIMESTAMP(3), + MMA8452_CHANNEL(X, idx_x, 12), + MMA8452_CHANNEL(Y, idx_y, 12), + MMA8452_CHANNEL(Z, idx_z, 12), + IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8453_channels[] = { - MMA8452_CHANNEL(X, 0, 10), - MMA8452_CHANNEL(Y, 1, 10), - MMA8452_CHANNEL(Z, 2, 10), - IIO_CHAN_SOFT_TIMESTAMP(3), + MMA8452_CHANNEL(X, idx_x, 10), + MMA8452_CHANNEL(Y, idx_y, 10), + MMA8452_CHANNEL(Z, idx_z, 10), + IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8652_channels[] = { - MMA8652_CHANNEL(X, 0, 12), - MMA8652_CHANNEL(Y, 1, 12), - MMA8652_CHANNEL(Z, 2, 12), - IIO_CHAN_SOFT_TIMESTAMP(3), + MMA8652_CHANNEL(X, idx_x, 12), + MMA8652_CHANNEL(Y, idx_y, 12), + MMA8652_CHANNEL(Z, idx_z, 12), + IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8653_channels[] = { - MMA8652_CHANNEL(X, 0, 10), - MMA8652_CHANNEL(Y, 1, 10), - MMA8652_CHANNEL(Z, 2, 10), - IIO_CHAN_SOFT_TIMESTAMP(3), + MMA8652_CHANNEL(X, idx_x, 10), + MMA8652_CHANNEL(Y, idx_y, 10), + MMA8652_CHANNEL(Z, idx_z, 10), + IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; enum { + mma8451, mma8452, mma8453, mma8652, @@ -851,17 +993,34 @@ enum { }; static const struct mma_chip_info mma_chip_info_table[] = { - [mma8452] = { - .chip_id = MMA8452_DEVICE_ID, - .channels = mma8452_channels, - .num_channels = ARRAY_SIZE(mma8452_channels), + [mma8451] = { + .chip_id = MMA8451_DEVICE_ID, + .channels = mma8451_channels, + .num_channels = ARRAY_SIZE(mma8451_channels), /* * Hardware has fullscale of -2G, -4G, -8G corresponding to - * raw value -2048 for 12 bit or -512 for 10 bit. + * raw value -8192 for 14 bit, -2048 for 12 bit or -512 for 10 + * bit. * The userspace interface uses m/s^2 and we declare micro units * So scale factor for 12 bit here is given by: - * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 + * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 */ + .mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} }, + .ev_cfg = MMA8452_TRANSIENT_CFG, + .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, + .ev_cfg_chan_shift = 1, + .ev_src = MMA8452_TRANSIENT_SRC, + .ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE, + .ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE, + .ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE, + .ev_ths = MMA8452_TRANSIENT_THS, + .ev_ths_mask = MMA8452_TRANSIENT_THS_MASK, + .ev_count = MMA8452_TRANSIENT_COUNT, + }, + [mma8452] = { + .chip_id = MMA8452_DEVICE_ID, + .channels = mma8452_channels, + .num_channels = ARRAY_SIZE(mma8452_channels), .mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} }, .ev_cfg = MMA8452_TRANSIENT_CFG, .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, @@ -1042,6 +1201,7 @@ static int mma8452_reset(struct i2c_client *client) } static const struct of_device_id mma8452_dt_ids[] = { + { .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] }, { .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] }, { .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] }, { .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] }, @@ -1078,6 +1238,7 @@ static int mma8452_probe(struct i2c_client *client, return ret; switch (ret) { + case MMA8451_DEVICE_ID: case MMA8452_DEVICE_ID: case MMA8453_DEVICE_ID: case MMA8652_DEVICE_ID: @@ -1130,13 +1291,21 @@ static int mma8452_probe(struct i2c_client *client, MMA8452_INT_FF_MT; int enabled_interrupts = MMA8452_INT_TRANS | MMA8452_INT_FF_MT; + int irq2; - /* Assume wired to INT1 pin */ - ret = i2c_smbus_write_byte_data(client, - MMA8452_CTRL_REG5, - supported_interrupts); - if (ret < 0) - return ret; + irq2 = of_irq_get_byname(client->dev.of_node, "INT2"); + + if (irq2 == client->irq) { + dev_dbg(&client->dev, "using interrupt line INT2\n"); + } else { + ret = i2c_smbus_write_byte_data(client, + MMA8452_CTRL_REG5, + supported_interrupts); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "using interrupt line INT1\n"); + } ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG4, @@ -1175,6 +1344,10 @@ static int mma8452_probe(struct i2c_client *client, if (ret < 0) goto buffer_cleanup; + ret = mma8452_set_freefall_mode(data, false); + if (ret) + return ret; + return 0; buffer_cleanup: diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c index 7db7cc0..d899a4d 100644 --- a/drivers/iio/accel/mma9551.c +++ b/drivers/iio/accel/mma9551.c @@ -495,25 +495,23 @@ static int mma9551_probe(struct i2c_client *client, if (ret < 0) goto out_poweroff; - ret = iio_device_register(indio_dev); - if (ret < 0) { - dev_err(&client->dev, "unable to register iio device\n"); - goto out_poweroff; - } - ret = pm_runtime_set_active(&client->dev); if (ret < 0) - goto out_iio_unregister; + goto out_poweroff; pm_runtime_enable(&client->dev); pm_runtime_set_autosuspend_delay(&client->dev, MMA9551_AUTO_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(&client->dev); + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "unable to register iio device\n"); + goto out_poweroff; + } + return 0; -out_iio_unregister: - iio_device_unregister(indio_dev); out_poweroff: mma9551_set_device_state(client, false); @@ -525,11 +523,12 @@ static int mma9551_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); struct mma9551_data *data = iio_priv(indio_dev); + iio_device_unregister(indio_dev); + pm_runtime_disable(&client->dev); pm_runtime_set_suspended(&client->dev); pm_runtime_put_noidle(&client->dev); - iio_device_unregister(indio_dev); mutex_lock(&data->mutex); mma9551_set_device_state(data->client, false); mutex_unlock(&data->mutex); diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 9408ef3..fa7d362 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -1133,27 +1133,24 @@ static int mma9553_probe(struct i2c_client *client, } } - ret = iio_device_register(indio_dev); - if (ret < 0) { - dev_err(&client->dev, "unable to register iio device\n"); - goto out_poweroff; - } - ret = pm_runtime_set_active(&client->dev); if (ret < 0) - goto out_iio_unregister; + goto out_poweroff; pm_runtime_enable(&client->dev); pm_runtime_set_autosuspend_delay(&client->dev, MMA9551_AUTO_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(&client->dev); - dev_dbg(&indio_dev->dev, "Registered device %s\n", name); + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "unable to register iio device\n"); + goto out_poweroff; + } + dev_dbg(&indio_dev->dev, "Registered device %s\n", name); return 0; -out_iio_unregister: - iio_device_unregister(indio_dev); out_poweroff: mma9551_set_device_state(client, false); return ret; @@ -1164,11 +1161,12 @@ static int mma9553_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); struct mma9553_data *data = iio_priv(indio_dev); + iio_device_unregister(indio_dev); + pm_runtime_disable(&client->dev); pm_runtime_set_suspended(&client->dev); pm_runtime_put_noidle(&client->dev); - iio_device_unregister(indio_dev); mutex_lock(&data->mutex); mma9551_set_device_state(data->client, false); mutex_unlock(&data->mutex); diff --git b/drivers/iio/accel/mxc6255.c b/drivers/iio/accel/mxc6255.c new file mode 100644 index 0000000..97ccde7 --- /dev/null +++ b/drivers/iio/accel/mxc6255.c @@ -0,0 +1,198 @@ +/* + * MXC6255 - MEMSIC orientation sensing accelerometer + * + * Copyright (c) 2015, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for MXC6255 (7-bit I2C slave address 0x15). + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MXC6255_DRV_NAME "mxc6255" +#define MXC6255_REGMAP_NAME "mxc6255_regmap" + +#define MXC6255_REG_XOUT 0x00 +#define MXC6255_REG_YOUT 0x01 +#define MXC6255_REG_CHIP_ID 0x08 + +#define MXC6255_CHIP_ID 0x05 + +/* + * MXC6255 has only one measurement range: +/- 2G. + * The acceleration output is an 8-bit value. + * + * Scale is calculated as follows: + * (2 + 2) * 9.80665 / (2^8 - 1) = 0.153829 + * + * Scale value for +/- 2G measurement range + */ +#define MXC6255_SCALE 153829 + +enum mxc6255_axis { + AXIS_X, + AXIS_Y, +}; + +struct mxc6255_data { + struct i2c_client *client; + struct regmap *regmap; +}; + +static int mxc6255_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mxc6255_data *data = iio_priv(indio_dev); + unsigned int reg; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_read(data->regmap, chan->address, ®); + if (ret < 0) { + dev_err(&data->client->dev, + "Error reading reg %lu\n", chan->address); + return ret; + } + + *val = sign_extend32(reg, 7); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = MXC6255_SCALE; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_info mxc6255_info = { + .driver_module = THIS_MODULE, + .read_raw = mxc6255_read_raw, +}; + +#define MXC6255_CHANNEL(_axis, reg) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .address = reg, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec mxc6255_channels[] = { + MXC6255_CHANNEL(X, MXC6255_REG_XOUT), + MXC6255_CHANNEL(Y, MXC6255_REG_YOUT), +}; + +static bool mxc6255_is_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MXC6255_REG_XOUT: + case MXC6255_REG_YOUT: + case MXC6255_REG_CHIP_ID: + return true; + default: + return false; + } +} + +static const struct regmap_config mxc6255_regmap_config = { + .name = MXC6255_REGMAP_NAME, + + .reg_bits = 8, + .val_bits = 8, + + .readable_reg = mxc6255_is_readable_reg, +}; + +static int mxc6255_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mxc6255_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + unsigned int chip_id; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + regmap = devm_regmap_init_i2c(client, &mxc6255_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Error initializing regmap\n"); + return PTR_ERR(regmap); + } + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + data->regmap = regmap; + + indio_dev->name = MXC6255_DRV_NAME; + indio_dev->dev.parent = &client->dev; + indio_dev->channels = mxc6255_channels; + indio_dev->num_channels = ARRAY_SIZE(mxc6255_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &mxc6255_info; + + ret = regmap_read(data->regmap, MXC6255_REG_CHIP_ID, &chip_id); + if (ret < 0) { + dev_err(&client->dev, "Error reading chip id %d\n", ret); + return ret; + } + + if (chip_id != MXC6255_CHIP_ID) { + dev_err(&client->dev, "Invalid chip id %x\n", chip_id); + return -ENODEV; + } + + dev_dbg(&client->dev, "Chip id %x\n", chip_id); + + ret = devm_iio_device_register(&client->dev, indio_dev); + if (ret < 0) { + dev_err(&client->dev, "Could not register IIO device\n"); + return ret; + } + + return 0; +} + +static const struct acpi_device_id mxc6255_acpi_match[] = { + {"MXC6255", 0}, + { } +}; +MODULE_DEVICE_TABLE(acpi, mxc6255_acpi_match); + +static const struct i2c_device_id mxc6255_id[] = { + {"mxc6255", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, mxc6255_id); + +static struct i2c_driver mxc6255_driver = { + .driver = { + .name = MXC6255_DRV_NAME, + .acpi_match_table = ACPI_PTR(mxc6255_acpi_match), + }, + .probe = mxc6255_probe, + .id_table = mxc6255_id, +}; + +module_i2c_driver(mxc6255_driver); + +MODULE_AUTHOR("Teodora Baluta "); +MODULE_DESCRIPTION("MEMSIC MXC6255 orientation sensing accelerometer driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h index 468f21f..5d4a189 100644 --- a/drivers/iio/accel/st_accel.h +++ b/drivers/iio/accel/st_accel.h @@ -27,6 +27,7 @@ #define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel" #define LSM330_ACCEL_DEV_NAME "lsm330_accel" #define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel" +#define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel" /** * struct st_sensors_platform_data - default accel platform data diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 197a08b..a03a141 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -67,6 +67,8 @@ #define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10 #define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08 +#define ST_ACCEL_1_IHL_IRQ_ADDR 0x25 +#define ST_ACCEL_1_IHL_IRQ_MASK 0x02 #define ST_ACCEL_1_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 2 */ @@ -92,6 +94,8 @@ #define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02 #define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10 +#define ST_ACCEL_2_IHL_IRQ_ADDR 0x22 +#define ST_ACCEL_2_IHL_IRQ_MASK 0x80 #define ST_ACCEL_2_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 3 */ @@ -125,6 +129,8 @@ #define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23 #define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80 #define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00 +#define ST_ACCEL_3_IHL_IRQ_ADDR 0x23 +#define ST_ACCEL_3_IHL_IRQ_MASK 0x40 #define ST_ACCEL_3_IG1_EN_ADDR 0x23 #define ST_ACCEL_3_IG1_EN_MASK 0x08 #define ST_ACCEL_3_MULTIREAD_BIT false @@ -169,6 +175,8 @@ #define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04 #define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20 +#define ST_ACCEL_5_IHL_IRQ_ADDR 0x22 +#define ST_ACCEL_5_IHL_IRQ_MASK 0x80 #define ST_ACCEL_5_IG1_EN_ADDR 0x21 #define ST_ACCEL_5_IG1_EN_MASK 0x08 #define ST_ACCEL_5_MULTIREAD_BIT false @@ -232,6 +240,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { [3] = LSM330DL_ACCEL_DEV_NAME, [4] = LSM330DLC_ACCEL_DEV_NAME, [5] = LSM303AGR_ACCEL_DEV_NAME, + [6] = LIS2DH12_ACCEL_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_accel_12bit_channels, .odr = { @@ -291,6 +300,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_1_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT, .bootime = 2, @@ -354,6 +365,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_2_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT, .bootime = 2, @@ -429,6 +442,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_3_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK, .ig1 = { .en_addr = ST_ACCEL_3_IG1_EN_ADDR, .en_mask = ST_ACCEL_3_IG1_EN_MASK, @@ -536,6 +551,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_5_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT, .bootime = 2, /* guess */ diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index 8b9cc84..294a32f 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = { .compatible = "st,lsm303agr-accel", .data = LSM303AGR_ACCEL_DEV_NAME, }, + { + .compatible = "st,lis2dh12-accel", + .data = LIS2DH12_ACCEL_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_accel_of_match); @@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] = { { LSM303DLM_ACCEL_DEV_NAME }, { LSM330_ACCEL_DEV_NAME }, { LSM303AGR_ACCEL_DEV_NAME }, + { LIS2DH12_ACCEL_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(i2c, st_accel_id_table); diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c index f71b0d3..fcd5847 100644 --- a/drivers/iio/accel/st_accel_spi.c +++ b/drivers/iio/accel/st_accel_spi.c @@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = { { LSM303DLM_ACCEL_DEV_NAME }, { LSM330_ACCEL_DEV_NAME }, { LSM303AGR_ACCEL_DEV_NAME }, + { LIS2DH12_ACCEL_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(spi, st_accel_id_table); diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 1e7aded..82c718c 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -131,6 +131,17 @@ config AT91_ADC To compile this driver as a module, choose M here: the module will be called at91_adc. +config AT91_SAMA5D2_ADC + tristate "Atmel AT91 SAMA5D2 ADC" + depends on ARCH_AT91 || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for Atmel SAMA5D2 ADC which is + available on SAMA5D2 SoC family. + + To compile this driver as a module, choose M here: the module will be + called at91-sama5d2_adc. + config AXP288_ADC tristate "X-Powers AXP288 ADC driver" depends on MFD_AXP20X @@ -175,6 +186,7 @@ config DA9150_GPADC config EXYNOS_ADC tristate "Exynos ADC driver support" depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST) + depends on HAS_IOMEM help Core support for the ADC block found in the Samsung EXYNOS series of SoCs for drivers such as the touchscreen and hwmon to use to share @@ -183,6 +195,13 @@ config EXYNOS_ADC To compile this driver as a module, choose M here: the module will be called exynos_adc. +config FSL_MX25_ADC + tristate "Freescale MX25 ADC driver" + depends on MFD_MX25_TSADC + help + Generic Conversion Queue driver used for general purpose ADC in the + MX25. This driver supports single measurements using the MX25 ADC. + config HI8435 tristate "Holt Integrated Circuits HI-8435 threshold detector" select IIO_TRIGGERED_EVENT @@ -194,6 +213,26 @@ config HI8435 This driver can also be built as a module. If so, the module will be called hi8435. +config INA2XX_ADC + tristate "Texas Instruments INA2xx Power Monitors IIO driver" + depends on I2C && !SENSORS_INA2XX + select REGMAP_I2C + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Say yes here to build support for TI INA2xx family of Power Monitors. + This driver is mutually exclusive with the HWMON version. + +config IMX7D_ADC + tristate "IMX7D ADC driver" + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for IMX7D ADC. + + This driver can also be built as a module. If so, the module will be + called imx7d_adc. + config LP8788_ADC tristate "LP8788 ADC driver" depends on MFD_LP8788 @@ -246,11 +285,11 @@ config MCP320X called mcp320x. config MCP3422 - tristate "Microchip Technology MCP3422/3/4/6/7/8 driver" + tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver" depends on I2C help - Say yes here to build support for Microchip Technology's - MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428 + Say yes here to build support for Microchip Technology's MCP3421 + MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428 analog to digital converters. This driver can also be built as a module. If so, the module will be @@ -266,6 +305,20 @@ config MEN_Z188_ADC This driver can also be built as a module. If so, the module will be called men_z188_adc. +config MXS_LRADC + tristate "Freescale i.MX23/i.MX28 LRADC" + depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM + depends on INPUT + select STMP_DEVICE + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for i.MX23/i.MX28 LRADC convertor + built into these chips. + + To compile this driver as a module, choose M here: the + module will be called mxs-lradc. + config NAU7802 tristate "Nuvoton NAU7802 ADC driver" depends on I2C @@ -275,6 +328,14 @@ config NAU7802 To compile this driver as a module, choose M here: the module will be called nau7802. +config PALMAS_GPADC + tristate "TI Palmas General Purpose ADC" + depends on MFD_PALMAS + help + Palmas series pmic chip by Texas Instruments (twl6035/6037) + is used in smartphones and tablets and supports a 16 channel + general purpose ADC. + config QCOM_SPMI_IADC tristate "Qualcomm SPMI PMIC current ADC" depends on SPMI @@ -323,16 +384,49 @@ config TI_ADC081C This driver can also be built as a module. If so, the module will be called ti-adc081c. +config TI_ADC0832 + tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838" + depends on SPI + help + If you say yes here you get support for Texas Instruments ADC0831, + ADC0832, ADC0834, ADC0838 ADC chips. + + This driver can also be built as a module. If so, the module will be + called ti-adc0832. + config TI_ADC128S052 - tristate "Texas Instruments ADC128S052/ADC122S021" + tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" depends on SPI help - If you say yes here you get support for Texas Instruments ADC128S052 - and ADC122S021 chips. + If you say yes here you get support for Texas Instruments ADC128S052, + ADC122S021 and ADC124S021 chips. This driver can also be built as a module. If so, the module will be called ti-adc128s052. +config TI_ADS1015 + tristate "Texas Instruments ADS1015 ADC" + depends on I2C && !SENSORS_ADS1015 + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for Texas Instruments ADS1015 + ADC chip. + + This driver can also be built as a module. If so, the module will be + called ti-ads1015. + +config TI_ADS8688 + tristate "Texas Instruments ADS8688" + depends on SPI && OF + help + If you say yes here you get support for Texas Instruments ADS8684 and + and ADS8688 ADC chips + + This driver can also be built as a module. If so, the module will be + called ti-ads8688. + config TI_AM335X_ADC tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADC diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 99b37a9..0cb7921 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -14,24 +14,33 @@ obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AD799X) += ad799x.o obj-$(CONFIG_AT91_ADC) += at91_adc.o +obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o obj-$(CONFIG_AXP288_ADC) += axp288_adc.o obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o +obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o obj-$(CONFIG_HI8435) += hi8435.o +obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o +obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_MAX1027) += max1027.o obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_MCP320X) += mcp320x.o obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o +obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_NAU7802) += nau7802.o +obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o +obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o +obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o +obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index 4d960d3..7b07bb6 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -478,10 +478,9 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, *val2 = st-> scale_avail[(st->conf >> 8) & 0x7][1]; return IIO_VAL_INT_PLUS_NANO; - } else { - /* 1170mV / 2^23 * 6 */ - scale_uv = (1170ULL * 1000000000ULL * 6ULL); } + /* 1170mV / 2^23 * 6 */ + scale_uv = (1170ULL * 1000000000ULL * 6ULL); break; case IIO_TEMP: /* 1170mV / 0.81 mV/C / 2^23 */ diff --git b/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c new file mode 100644 index 0000000..dbee13a --- /dev/null +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -0,0 +1,508 @@ +/* + * Atmel ADC driver for SAMA5D2 devices and compatible. + * + * Copyright (C) 2015 Atmel, + * 2015 Ludovic Desroches + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Control Register */ +#define AT91_SAMA5D2_CR 0x00 +/* Software Reset */ +#define AT91_SAMA5D2_CR_SWRST BIT(0) +/* Start Conversion */ +#define AT91_SAMA5D2_CR_START BIT(1) +/* Touchscreen Calibration */ +#define AT91_SAMA5D2_CR_TSCALIB BIT(2) +/* Comparison Restart */ +#define AT91_SAMA5D2_CR_CMPRST BIT(4) + +/* Mode Register */ +#define AT91_SAMA5D2_MR 0x04 +/* Trigger Selection */ +#define AT91_SAMA5D2_MR_TRGSEL(v) ((v) << 1) +/* ADTRG */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG0 0 +/* TIOA0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG1 1 +/* TIOA1 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG2 2 +/* TIOA2 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG3 3 +/* PWM event line 0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG4 4 +/* PWM event line 1 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG5 5 +/* TIOA3 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG6 6 +/* RTCOUT0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG7 7 +/* Sleep Mode */ +#define AT91_SAMA5D2_MR_SLEEP BIT(5) +/* Fast Wake Up */ +#define AT91_SAMA5D2_MR_FWUP BIT(6) +/* Prescaler Rate Selection */ +#define AT91_SAMA5D2_MR_PRESCAL(v) ((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET) +#define AT91_SAMA5D2_MR_PRESCAL_OFFSET 8 +#define AT91_SAMA5D2_MR_PRESCAL_MAX 0xff +/* Startup Time */ +#define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16) +/* Analog Change */ +#define AT91_SAMA5D2_MR_ANACH BIT(23) +/* Tracking Time */ +#define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24) +#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff +/* Transfer Time */ +#define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28) +#define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3 +/* Use Sequence Enable */ +#define AT91_SAMA5D2_MR_USEQ BIT(31) + +/* Channel Sequence Register 1 */ +#define AT91_SAMA5D2_SEQR1 0x08 +/* Channel Sequence Register 2 */ +#define AT91_SAMA5D2_SEQR2 0x0c +/* Channel Enable Register */ +#define AT91_SAMA5D2_CHER 0x10 +/* Channel Disable Register */ +#define AT91_SAMA5D2_CHDR 0x14 +/* Channel Status Register */ +#define AT91_SAMA5D2_CHSR 0x18 +/* Last Converted Data Register */ +#define AT91_SAMA5D2_LCDR 0x20 +/* Interrupt Enable Register */ +#define AT91_SAMA5D2_IER 0x24 +/* Interrupt Disable Register */ +#define AT91_SAMA5D2_IDR 0x28 +/* Interrupt Mask Register */ +#define AT91_SAMA5D2_IMR 0x2c +/* Interrupt Status Register */ +#define AT91_SAMA5D2_ISR 0x30 +/* Last Channel Trigger Mode Register */ +#define AT91_SAMA5D2_LCTMR 0x34 +/* Last Channel Compare Window Register */ +#define AT91_SAMA5D2_LCCWR 0x38 +/* Overrun Status Register */ +#define AT91_SAMA5D2_OVER 0x3c +/* Extended Mode Register */ +#define AT91_SAMA5D2_EMR 0x40 +/* Compare Window Register */ +#define AT91_SAMA5D2_CWR 0x44 +/* Channel Gain Register */ +#define AT91_SAMA5D2_CGR 0x48 +/* Channel Offset Register */ +#define AT91_SAMA5D2_COR 0x4c +/* Channel Data Register 0 */ +#define AT91_SAMA5D2_CDR0 0x50 +/* Analog Control Register */ +#define AT91_SAMA5D2_ACR 0x94 +/* Touchscreen Mode Register */ +#define AT91_SAMA5D2_TSMR 0xb0 +/* Touchscreen X Position Register */ +#define AT91_SAMA5D2_XPOSR 0xb4 +/* Touchscreen Y Position Register */ +#define AT91_SAMA5D2_YPOSR 0xb8 +/* Touchscreen Pressure Register */ +#define AT91_SAMA5D2_PRESSR 0xbc +/* Trigger Register */ +#define AT91_SAMA5D2_TRGR 0xc0 +/* Correction Select Register */ +#define AT91_SAMA5D2_COSR 0xd0 +/* Correction Value Register */ +#define AT91_SAMA5D2_CVR 0xd4 +/* Channel Error Correction Register */ +#define AT91_SAMA5D2_CECR 0xd8 +/* Write Protection Mode Register */ +#define AT91_SAMA5D2_WPMR 0xe4 +/* Write Protection Status Register */ +#define AT91_SAMA5D2_WPSR 0xe8 +/* Version Register */ +#define AT91_SAMA5D2_VERSION 0xfc + +#define AT91_AT91_SAMA5D2_CHAN(num, addr) \ + { \ + .type = IIO_VOLTAGE, \ + .channel = num, \ + .address = addr, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + }, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ + .datasheet_name = "CH"#num, \ + .indexed = 1, \ + } + +#define at91_adc_readl(st, reg) readl_relaxed(st->base + reg) +#define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg) + +struct at91_adc_soc_info { + unsigned startup_time; + unsigned min_sample_rate; + unsigned max_sample_rate; +}; + +struct at91_adc_state { + void __iomem *base; + int irq; + struct clk *per_clk; + struct regulator *reg; + struct regulator *vref; + int vref_uv; + const struct iio_chan_spec *chan; + bool conversion_done; + u32 conversion_value; + struct at91_adc_soc_info soc_info; + wait_queue_head_t wq_data_available; + /* + * lock to prevent concurrent 'single conversion' requests through + * sysfs. + */ + struct mutex lock; +}; + +static const struct iio_chan_spec at91_adc_channels[] = { + AT91_AT91_SAMA5D2_CHAN(0, 0x50), + AT91_AT91_SAMA5D2_CHAN(1, 0x54), + AT91_AT91_SAMA5D2_CHAN(2, 0x58), + AT91_AT91_SAMA5D2_CHAN(3, 0x5c), + AT91_AT91_SAMA5D2_CHAN(4, 0x60), + AT91_AT91_SAMA5D2_CHAN(5, 0x64), + AT91_AT91_SAMA5D2_CHAN(6, 0x68), + AT91_AT91_SAMA5D2_CHAN(7, 0x6c), + AT91_AT91_SAMA5D2_CHAN(8, 0x70), + AT91_AT91_SAMA5D2_CHAN(9, 0x74), + AT91_AT91_SAMA5D2_CHAN(10, 0x78), + AT91_AT91_SAMA5D2_CHAN(11, 0x7c), +}; + +static unsigned at91_adc_startup_time(unsigned startup_time_min, + unsigned adc_clk_khz) +{ + const unsigned startup_lookup[] = { + 0, 8, 16, 24, + 64, 80, 96, 112, + 512, 576, 640, 704, + 768, 832, 896, 960 + }; + unsigned ticks_min, i; + + /* + * Since the adc frequency is checked before, there is no reason + * to not meet the startup time constraint. + */ + + ticks_min = startup_time_min * adc_clk_khz / 1000; + for (i = 0; i < ARRAY_SIZE(startup_lookup); i++) + if (startup_lookup[i] > ticks_min) + break; + + return i; +} + +static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq) +{ + struct iio_dev *indio_dev = iio_priv_to_dev(st); + unsigned f_per, prescal, startup; + + f_per = clk_get_rate(st->per_clk); + prescal = (f_per / (2 * freq)) - 1; + + startup = at91_adc_startup_time(st->soc_info.startup_time, + freq / 1000); + + at91_adc_writel(st, AT91_SAMA5D2_MR, + AT91_SAMA5D2_MR_TRANSFER(2) + | AT91_SAMA5D2_MR_STARTUP(startup) + | AT91_SAMA5D2_MR_PRESCAL(prescal)); + + dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", + freq, startup, prescal); +} + +static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st) +{ + unsigned f_adc, f_per = clk_get_rate(st->per_clk); + unsigned mr, prescal; + + mr = at91_adc_readl(st, AT91_SAMA5D2_MR); + prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET) + & AT91_SAMA5D2_MR_PRESCAL_MAX; + f_adc = f_per / (2 * (prescal + 1)); + + return f_adc; +} + +static irqreturn_t at91_adc_interrupt(int irq, void *private) +{ + struct iio_dev *indio = private; + struct at91_adc_state *st = iio_priv(indio); + u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR); + u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR); + + if (status & imr) { + st->conversion_value = at91_adc_readl(st, st->chan->address); + st->conversion_done = true; + wake_up_interruptible(&st->wq_data_available); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int at91_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&st->lock); + + st->chan = chan; + + at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START); + + ret = wait_event_interruptible_timeout(st->wq_data_available, + st->conversion_done, + msecs_to_jiffies(1000)); + if (ret == 0) + ret = -ETIMEDOUT; + + if (ret > 0) { + *val = st->conversion_value; + ret = IIO_VAL_INT; + st->conversion_done = false; + } + + at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel)); + + mutex_unlock(&st->lock); + return ret; + + case IIO_CHAN_INFO_SCALE: + *val = st->vref_uv / 1000; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = at91_adc_get_sample_freq(st); + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int at91_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_SAMP_FREQ) + return -EINVAL; + + if (val < st->soc_info.min_sample_rate || + val > st->soc_info.max_sample_rate) + return -EINVAL; + + at91_adc_setup_samp_freq(st, val); + + return 0; +} + +static const struct iio_info at91_adc_info = { + .read_raw = &at91_adc_read_raw, + .write_raw = &at91_adc_write_raw, + .driver_module = THIS_MODULE, +}; + +static int at91_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct at91_adc_state *st; + struct resource *res; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = dev_name(&pdev->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &at91_adc_info; + indio_dev->channels = at91_adc_channels; + indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels); + + st = iio_priv(indio_dev); + + ret = of_property_read_u32(pdev->dev.of_node, + "atmel,min-sample-rate-hz", + &st->soc_info.min_sample_rate); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,min-sample-rate-hz\n"); + return ret; + } + + ret = of_property_read_u32(pdev->dev.of_node, + "atmel,max-sample-rate-hz", + &st->soc_info.max_sample_rate); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,max-sample-rate-hz\n"); + return ret; + } + + ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms", + &st->soc_info.startup_time); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,startup-time-ms\n"); + return ret; + } + + init_waitqueue_head(&st->wq_data_available); + mutex_init(&st->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + st->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(st->base)) + return PTR_ERR(st->base); + + st->irq = platform_get_irq(pdev, 0); + if (st->irq <= 0) { + if (!st->irq) + st->irq = -ENXIO; + + return st->irq; + } + + st->per_clk = devm_clk_get(&pdev->dev, "adc_clk"); + if (IS_ERR(st->per_clk)) + return PTR_ERR(st->per_clk); + + st->reg = devm_regulator_get(&pdev->dev, "vddana"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + st->vref = devm_regulator_get(&pdev->dev, "vref"); + if (IS_ERR(st->vref)) + return PTR_ERR(st->vref); + + ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0, + pdev->dev.driver->name, indio_dev); + if (ret) + return ret; + + ret = regulator_enable(st->reg); + if (ret) + return ret; + + ret = regulator_enable(st->vref); + if (ret) + goto reg_disable; + + st->vref_uv = regulator_get_voltage(st->vref); + if (st->vref_uv <= 0) { + ret = -EINVAL; + goto vref_disable; + } + + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST); + at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff); + + at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate); + + ret = clk_prepare_enable(st->per_clk); + if (ret) + goto vref_disable; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto per_clk_disable_unprepare; + + dev_info(&pdev->dev, "version: %x\n", + readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); + + return 0; + +per_clk_disable_unprepare: + clk_disable_unprepare(st->per_clk); +vref_disable: + regulator_disable(st->vref); +reg_disable: + regulator_disable(st->reg); + return ret; +} + +static int at91_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct at91_adc_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + clk_disable_unprepare(st->per_clk); + + regulator_disable(st->vref); + regulator_disable(st->reg); + + return 0; +} + +static const struct of_device_id at91_adc_dt_match[] = { + { + .compatible = "atmel,sama5d2-adc", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, at91_adc_dt_match); + +static struct platform_driver at91_adc_driver = { + .probe = at91_adc_probe, + .remove = at91_adc_remove, + .driver = { + .name = "at91-sama5d2_adc", + .of_match_table = at91_adc_dt_match, + }, +}; +module_platform_driver(at91_adc_driver) + +MODULE_AUTHOR("Ludovic Desroches "); +MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 7b40925..f284cd6 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -742,7 +742,7 @@ static int at91_adc_of_get_resolution(struct at91_adc_state *st, return count; } - resolutions = kmalloc(count * sizeof(*resolutions), GFP_KERNEL); + resolutions = kmalloc_array(count, sizeof(*resolutions), GFP_KERNEL); if (!resolutions) return -ENOMEM; diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 0c904ed..7fd2494 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -46,7 +46,7 @@ struct axp288_adc_info { struct regmap *regmap; }; -static const struct iio_chan_spec const axp288_adc_channels[] = { +static const struct iio_chan_spec axp288_adc_channels[] = { { .indexed = 1, .type = IIO_TEMP, diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index 3a2dbb3..c15756d 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -42,12 +43,18 @@ #include #include +#include + /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */ #define ADC_V1_CON(x) ((x) + 0x00) +#define ADC_V1_TSC(x) ((x) + 0x04) #define ADC_V1_DLY(x) ((x) + 0x08) #define ADC_V1_DATX(x) ((x) + 0x0C) +#define ADC_V1_DATY(x) ((x) + 0x10) +#define ADC_V1_UPDN(x) ((x) + 0x14) #define ADC_V1_INTCLR(x) ((x) + 0x18) #define ADC_V1_MUX(x) ((x) + 0x1c) +#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20) /* S3C2410 ADC registers definitions */ #define ADC_S3C2410_MUX(x) ((x) + 0x18) @@ -71,6 +78,30 @@ #define ADC_S3C2410_DATX_MASK 0x3FF #define ADC_S3C2416_CON_RES_SEL (1u << 3) +/* touch screen always uses channel 0 */ +#define ADC_S3C2410_MUX_TS 0 + +/* ADCTSC Register Bits */ +#define ADC_S3C2443_TSC_UD_SEN (1u << 8) +#define ADC_S3C2410_TSC_YM_SEN (1u << 7) +#define ADC_S3C2410_TSC_YP_SEN (1u << 6) +#define ADC_S3C2410_TSC_XM_SEN (1u << 5) +#define ADC_S3C2410_TSC_XP_SEN (1u << 4) +#define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3) +#define ADC_S3C2410_TSC_AUTO_PST (1u << 2) +#define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0) + +#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \ + ADC_S3C2410_TSC_YP_SEN | \ + ADC_S3C2410_TSC_XP_SEN | \ + ADC_S3C2410_TSC_XY_PST(3)) + +#define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \ + ADC_S3C2410_TSC_YP_SEN | \ + ADC_S3C2410_TSC_XP_SEN | \ + ADC_S3C2410_TSC_AUTO_PST | \ + ADC_S3C2410_TSC_XY_PST(0)) + /* Bit definitions for ADC_V2 */ #define ADC_V2_CON1_SOFT_RESET (1u << 2) @@ -88,7 +119,9 @@ /* Bit definitions common for ADC_V1 and ADC_V2 */ #define ADC_CON_EN_START (1u << 0) #define ADC_CON_EN_START_MASK (0x3 << 0) +#define ADC_DATX_PRESSED (1u << 15) #define ADC_DATX_MASK 0xFFF +#define ADC_DATY_MASK 0xFFF #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) @@ -98,17 +131,24 @@ struct exynos_adc { struct exynos_adc_data *data; struct device *dev; + struct input_dev *input; void __iomem *regs; struct regmap *pmu_map; struct clk *clk; struct clk *sclk; unsigned int irq; + unsigned int tsirq; + unsigned int delay; struct regulator *vdd; struct completion completion; u32 value; unsigned int version; + + bool read_ts; + u32 ts_x; + u32 ts_y; }; struct exynos_adc_data { @@ -197,6 +237,9 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info) /* Enable 12-bit ADC resolution */ con1 |= ADC_V1_CON_RES; writel(con1, ADC_V1_CON(info->regs)); + + /* set touchscreen delay */ + writel(info->delay, ADC_V1_DLY(info->regs)); } static void exynos_adc_v1_exit_hw(struct exynos_adc *info) @@ -480,8 +523,8 @@ static int exynos_read_raw(struct iio_dev *indio_dev, if (info->data->start_conv) info->data->start_conv(info, chan->address); - timeout = wait_for_completion_timeout - (&info->completion, EXYNOS_ADC_TIMEOUT); + timeout = wait_for_completion_timeout(&info->completion, + EXYNOS_ADC_TIMEOUT); if (timeout == 0) { dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); if (info->data->init_hw) @@ -498,13 +541,55 @@ static int exynos_read_raw(struct iio_dev *indio_dev, return ret; } +static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y) +{ + struct exynos_adc *info = iio_priv(indio_dev); + unsigned long timeout; + int ret; + + mutex_lock(&indio_dev->mlock); + info->read_ts = true; + + reinit_completion(&info->completion); + + writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST, + ADC_V1_TSC(info->regs)); + + /* Select the ts channel to be used and Trigger conversion */ + info->data->start_conv(info, ADC_S3C2410_MUX_TS); + + timeout = wait_for_completion_timeout(&info->completion, + EXYNOS_ADC_TIMEOUT); + if (timeout == 0) { + dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); + if (info->data->init_hw) + info->data->init_hw(info); + ret = -ETIMEDOUT; + } else { + *x = info->ts_x; + *y = info->ts_y; + ret = 0; + } + + info->read_ts = false; + mutex_unlock(&indio_dev->mlock); + + return ret; +} + static irqreturn_t exynos_adc_isr(int irq, void *dev_id) { struct exynos_adc *info = (struct exynos_adc *)dev_id; u32 mask = info->data->mask; /* Read value */ - info->value = readl(ADC_V1_DATX(info->regs)) & mask; + if (info->read_ts) { + info->ts_x = readl(ADC_V1_DATX(info->regs)); + info->ts_y = readl(ADC_V1_DATY(info->regs)); + writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs)); + } else { + info->value = readl(ADC_V1_DATX(info->regs)) & mask; + } /* clear irq */ if (info->data->clear_irq) @@ -515,6 +600,46 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id) return IRQ_HANDLED; } +/* + * Here we (ab)use a threaded interrupt handler to stay running + * for as long as the touchscreen remains pressed, we report + * a new event with the latest data and then sleep until the + * next timer tick. This mirrors the behavior of the old + * driver, with much less code. + */ +static irqreturn_t exynos_ts_isr(int irq, void *dev_id) +{ + struct exynos_adc *info = dev_id; + struct iio_dev *dev = dev_get_drvdata(info->dev); + u32 x, y; + bool pressed; + int ret; + + while (info->input->users) { + ret = exynos_read_s3c64xx_ts(dev, &x, &y); + if (ret == -ETIMEDOUT) + break; + + pressed = x & y & ADC_DATX_PRESSED; + if (!pressed) { + input_report_key(info->input, BTN_TOUCH, 0); + input_sync(info->input); + break; + } + + input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK); + input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK); + input_report_key(info->input, BTN_TOUCH, 1); + input_sync(info->input); + + msleep(1); + }; + + writel(0, ADC_V1_CLRINTPNDNUP(info->regs)); + + return IRQ_HANDLED; +} + static int exynos_adc_reg_access(struct iio_dev *indio_dev, unsigned reg, unsigned writeval, unsigned *readval) @@ -566,18 +691,72 @@ static int exynos_adc_remove_devices(struct device *dev, void *c) return 0; } +static int exynos_adc_ts_open(struct input_dev *dev) +{ + struct exynos_adc *info = input_get_drvdata(dev); + + enable_irq(info->tsirq); + + return 0; +} + +static void exynos_adc_ts_close(struct input_dev *dev) +{ + struct exynos_adc *info = input_get_drvdata(dev); + + disable_irq(info->tsirq); +} + +static int exynos_adc_ts_init(struct exynos_adc *info) +{ + int ret; + + if (info->tsirq <= 0) + return -ENODEV; + + info->input = input_allocate_device(); + if (!info->input) + return -ENOMEM; + + info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0); + input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0); + + info->input->name = "S3C24xx TouchScreen"; + info->input->id.bustype = BUS_HOST; + info->input->open = exynos_adc_ts_open; + info->input->close = exynos_adc_ts_close; + + input_set_drvdata(info->input, info); + + ret = input_register_device(info->input); + if (ret) { + input_free_device(info->input); + return ret; + } + + disable_irq(info->tsirq); + ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr, + IRQF_ONESHOT, "touchscreen", info); + if (ret) + input_unregister_device(info->input); + + return ret; +} + static int exynos_adc_probe(struct platform_device *pdev) { struct exynos_adc *info = NULL; struct device_node *np = pdev->dev.of_node; + struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev); struct iio_dev *indio_dev = NULL; struct resource *mem; + bool has_ts = false; int ret = -ENODEV; int irq; - if (!np) - return ret; - indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc)); if (!indio_dev) { dev_err(&pdev->dev, "failed allocating iio device\n"); @@ -613,8 +792,14 @@ static int exynos_adc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no irq resource?\n"); return irq; } - info->irq = irq; + + irq = platform_get_irq(pdev, 1); + if (irq == -EPROBE_DEFER) + return irq; + + info->tsirq = irq; + info->dev = &pdev->dev; init_completion(&info->completion); @@ -680,6 +865,22 @@ static int exynos_adc_probe(struct platform_device *pdev) if (info->data->init_hw) info->data->init_hw(info); + /* leave out any TS related code if unreachable */ + if (IS_REACHABLE(CONFIG_INPUT)) { + has_ts = of_property_read_bool(pdev->dev.of_node, + "has-touchscreen") || pdata; + } + + if (pdata) + info->delay = pdata->delay; + else + info->delay = 10000; + + if (has_ts) + ret = exynos_adc_ts_init(info); + if (ret) + goto err_iio; + ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev); if (ret < 0) { dev_err(&pdev->dev, "failed adding child nodes\n"); @@ -691,6 +892,11 @@ static int exynos_adc_probe(struct platform_device *pdev) err_of_populate: device_for_each_child(&indio_dev->dev, NULL, exynos_adc_remove_devices); + if (has_ts) { + input_unregister_device(info->input); + free_irq(info->tsirq, info); + } +err_iio: iio_device_unregister(indio_dev); err_irq: free_irq(info->irq, info); @@ -710,6 +916,10 @@ static int exynos_adc_remove(struct platform_device *pdev) struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct exynos_adc *info = iio_priv(indio_dev); + if (IS_REACHABLE(CONFIG_INPUT)) { + free_irq(info->tsirq, info); + input_unregister_device(info->input); + } device_for_each_child(&indio_dev->dev, NULL, exynos_adc_remove_devices); iio_device_unregister(indio_dev); diff --git b/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c new file mode 100644 index 0000000..72b32c1 --- /dev/null +++ b/drivers/iio/adc/fsl-imx25-gcq.c @@ -0,0 +1,417 @@ +/* + * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + * + * This is the driver for the imx25 GCQ (Generic Conversion Queue) + * connected to the imx25 ADC. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MX25_GCQ_TIMEOUT (msecs_to_jiffies(2000)) + +static const char * const driver_name = "mx25-gcq"; + +enum mx25_gcq_cfgs { + MX25_CFG_XP = 0, + MX25_CFG_YP, + MX25_CFG_XN, + MX25_CFG_YN, + MX25_CFG_WIPER, + MX25_CFG_INAUX0, + MX25_CFG_INAUX1, + MX25_CFG_INAUX2, + MX25_NUM_CFGS, +}; + +struct mx25_gcq_priv { + struct regmap *regs; + struct completion completed; + struct clk *clk; + int irq; + struct regulator *vref[4]; + u32 channel_vref_mv[MX25_NUM_CFGS]; +}; + +#define MX25_CQG_CHAN(chan, id) {\ + .type = IIO_VOLTAGE,\ + .indexed = 1,\ + .channel = chan,\ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE),\ + .datasheet_name = id,\ +} + +static const struct iio_chan_spec mx25_gcq_channels[MX25_NUM_CFGS] = { + MX25_CQG_CHAN(MX25_CFG_XP, "xp"), + MX25_CQG_CHAN(MX25_CFG_YP, "yp"), + MX25_CQG_CHAN(MX25_CFG_XN, "xn"), + MX25_CQG_CHAN(MX25_CFG_YN, "yn"), + MX25_CQG_CHAN(MX25_CFG_WIPER, "wiper"), + MX25_CQG_CHAN(MX25_CFG_INAUX0, "inaux0"), + MX25_CQG_CHAN(MX25_CFG_INAUX1, "inaux1"), + MX25_CQG_CHAN(MX25_CFG_INAUX2, "inaux2"), +}; + +static const char * const mx25_gcq_refp_names[] = { + [MX25_ADC_REFP_YP] = "yp", + [MX25_ADC_REFP_XP] = "xp", + [MX25_ADC_REFP_INT] = "int", + [MX25_ADC_REFP_EXT] = "ext", +}; + +static irqreturn_t mx25_gcq_irq(int irq, void *data) +{ + struct mx25_gcq_priv *priv = data; + u32 stats; + + regmap_read(priv->regs, MX25_ADCQ_SR, &stats); + + if (stats & MX25_ADCQ_SR_EOQ) { + regmap_update_bits(priv->regs, MX25_ADCQ_MR, + MX25_ADCQ_MR_EOQ_IRQ, MX25_ADCQ_MR_EOQ_IRQ); + complete(&priv->completed); + } + + /* Disable conversion queue run */ + regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 0); + + /* Acknowledge all possible irqs */ + regmap_write(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR | + MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR | + MX25_ADCQ_SR_EOQ | MX25_ADCQ_SR_PD); + + return IRQ_HANDLED; +} + +static int mx25_gcq_get_raw_value(struct device *dev, + struct iio_chan_spec const *chan, + struct mx25_gcq_priv *priv, + int *val) +{ + long timeout; + u32 data; + + /* Setup the configuration we want to use */ + regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0, + MX25_ADCQ_ITEM(0, chan->channel)); + + regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_EOQ_IRQ, 0); + + /* Trigger queue for one run */ + regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, + MX25_ADCQ_CR_FQS); + + timeout = wait_for_completion_interruptible_timeout( + &priv->completed, MX25_GCQ_TIMEOUT); + if (timeout < 0) { + dev_err(dev, "ADC wait for measurement failed\n"); + return timeout; + } else if (timeout == 0) { + dev_err(dev, "ADC timed out\n"); + return -ETIMEDOUT; + } + + regmap_read(priv->regs, MX25_ADCQ_FIFO, &data); + + *val = MX25_ADCQ_FIFO_DATA(data); + + return IIO_VAL_INT; +} + +static int mx25_gcq_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct mx25_gcq_priv *priv = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val); + mutex_unlock(&indio_dev->mlock); + return ret; + + case IIO_CHAN_INFO_SCALE: + *val = priv->channel_vref_mv[chan->channel]; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +static const struct iio_info mx25_gcq_iio_info = { + .read_raw = mx25_gcq_read_raw, +}; + +static const struct regmap_config mx25_gcq_regconfig = { + .max_register = 0x5c, + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int mx25_gcq_setup_cfgs(struct platform_device *pdev, + struct mx25_gcq_priv *priv) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + struct device *dev = &pdev->dev; + unsigned int refp_used[4] = {}; + int ret, i; + + /* + * Setup all configurations registers with a default conversion + * configuration for each input + */ + for (i = 0; i < MX25_NUM_CFGS; ++i) + regmap_write(priv->regs, MX25_ADCQ_CFG(i), + MX25_ADCQ_CFG_YPLL_OFF | + MX25_ADCQ_CFG_XNUR_OFF | + MX25_ADCQ_CFG_XPUL_OFF | + MX25_ADCQ_CFG_REFP_INT | + MX25_ADCQ_CFG_IN(i) | + MX25_ADCQ_CFG_REFN_NGND2); + + /* + * First get all regulators to store them in channel_vref_mv if + * necessary. Later we use that information for proper IIO scale + * information. + */ + priv->vref[MX25_ADC_REFP_INT] = NULL; + priv->vref[MX25_ADC_REFP_EXT] = + devm_regulator_get_optional(&pdev->dev, "vref-ext"); + priv->vref[MX25_ADC_REFP_XP] = + devm_regulator_get_optional(&pdev->dev, "vref-xp"); + priv->vref[MX25_ADC_REFP_YP] = + devm_regulator_get_optional(&pdev->dev, "vref-yp"); + + for_each_child_of_node(np, child) { + u32 reg; + u32 refp = MX25_ADCQ_CFG_REFP_INT; + u32 refn = MX25_ADCQ_CFG_REFN_NGND2; + + ret = of_property_read_u32(child, "reg", ®); + if (ret) { + dev_err(dev, "Failed to get reg property\n"); + return ret; + } + + if (reg >= MX25_NUM_CFGS) { + dev_err(dev, + "reg value is greater than the number of available configuration registers\n"); + return -EINVAL; + } + + of_property_read_u32(child, "fsl,adc-refp", &refp); + of_property_read_u32(child, "fsl,adc-refn", &refn); + + switch (refp) { + case MX25_ADC_REFP_EXT: + case MX25_ADC_REFP_XP: + case MX25_ADC_REFP_YP: + if (IS_ERR(priv->vref[refp])) { + dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.", + mx25_gcq_refp_names[refp]); + return PTR_ERR(priv->vref[refp]); + } + priv->channel_vref_mv[reg] = + regulator_get_voltage(priv->vref[refp]); + /* Conversion from uV to mV */ + priv->channel_vref_mv[reg] /= 1000; + break; + case MX25_ADC_REFP_INT: + priv->channel_vref_mv[reg] = 2500; + break; + default: + dev_err(dev, "Invalid positive reference %d\n", refp); + return -EINVAL; + } + + ++refp_used[refp]; + + /* + * Shift the read values to the correct positions within the + * register. + */ + refp = MX25_ADCQ_CFG_REFP(refp); + refn = MX25_ADCQ_CFG_REFN(refn); + + if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) { + dev_err(dev, "Invalid fsl,adc-refp property value\n"); + return -EINVAL; + } + if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) { + dev_err(dev, "Invalid fsl,adc-refn property value\n"); + return -EINVAL; + } + + regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg), + MX25_ADCQ_CFG_REFP_MASK | + MX25_ADCQ_CFG_REFN_MASK, + refp | refn); + } + regmap_update_bits(priv->regs, MX25_ADCQ_CR, + MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST, + MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST); + + regmap_write(priv->regs, MX25_ADCQ_CR, + MX25_ADCQ_CR_PDMSK | MX25_ADCQ_CR_QSM_FQS); + + /* Remove unused regulators */ + for (i = 0; i != 4; ++i) { + if (!refp_used[i]) { + if (!IS_ERR_OR_NULL(priv->vref[i])) + devm_regulator_put(priv->vref[i]); + priv->vref[i] = NULL; + } + } + + return 0; +} + +static int mx25_gcq_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct mx25_gcq_priv *priv; + struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *mem; + int ret; + int i; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mem = devm_ioremap_resource(dev, res); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig); + if (IS_ERR(priv->regs)) { + dev_err(dev, "Failed to initialize regmap\n"); + return PTR_ERR(priv->regs); + } + + init_completion(&priv->completed); + + ret = mx25_gcq_setup_cfgs(pdev, priv); + if (ret) + return ret; + + for (i = 0; i != 4; ++i) { + if (!priv->vref[i]) + continue; + + ret = regulator_enable(priv->vref[i]); + if (ret) + goto err_regulator_disable; + } + + priv->clk = tsadc->clk; + ret = clk_prepare_enable(priv->clk); + if (ret) { + dev_err(dev, "Failed to enable clock\n"); + goto err_vref_disable; + } + + priv->irq = platform_get_irq(pdev, 0); + if (priv->irq <= 0) { + dev_err(dev, "Failed to get IRQ\n"); + ret = priv->irq; + if (!ret) + ret = -ENXIO; + goto err_clk_unprepare; + } + + ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv); + if (ret) { + dev_err(dev, "Failed requesting IRQ\n"); + goto err_clk_unprepare; + } + + indio_dev->dev.parent = &pdev->dev; + indio_dev->channels = mx25_gcq_channels; + indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels); + indio_dev->info = &mx25_gcq_iio_info; + indio_dev->name = driver_name; + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "Failed to register iio device\n"); + goto err_irq_free; + } + + platform_set_drvdata(pdev, indio_dev); + + return 0; + +err_irq_free: + free_irq(priv->irq, priv); +err_clk_unprepare: + clk_disable_unprepare(priv->clk); +err_vref_disable: + i = 4; +err_regulator_disable: + for (; i-- > 0;) { + if (priv->vref[i]) + regulator_disable(priv->vref[i]); + } + return ret; +} + +static int mx25_gcq_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct mx25_gcq_priv *priv = iio_priv(indio_dev); + int i; + + iio_device_unregister(indio_dev); + free_irq(priv->irq, priv); + clk_disable_unprepare(priv->clk); + for (i = 4; i-- > 0;) { + if (priv->vref[i]) + regulator_disable(priv->vref[i]); + } + + return 0; +} + +static const struct of_device_id mx25_gcq_ids[] = { + { .compatible = "fsl,imx25-gcq", }, + { /* Sentinel */ } +}; + +static struct platform_driver mx25_gcq_driver = { + .driver = { + .name = "mx25-gcq", + .of_match_table = mx25_gcq_ids, + }, + .probe = mx25_gcq_probe, + .remove = mx25_gcq_remove, +}; +module_platform_driver(mx25_gcq_driver); + +MODULE_DESCRIPTION("ADC driver for Freescale mx25"); +MODULE_AUTHOR("Markus Pargmann "); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/adc/imx7d_adc.c b/drivers/iio/adc/imx7d_adc.c new file mode 100644 index 0000000..e2241ee --- /dev/null +++ b/drivers/iio/adc/imx7d_adc.c @@ -0,0 +1,609 @@ +/* + * Freescale i.MX7D ADC driver + * + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* ADC register */ +#define IMX7D_REG_ADC_CH_A_CFG1 0x00 +#define IMX7D_REG_ADC_CH_A_CFG2 0x10 +#define IMX7D_REG_ADC_CH_B_CFG1 0x20 +#define IMX7D_REG_ADC_CH_B_CFG2 0x30 +#define IMX7D_REG_ADC_CH_C_CFG1 0x40 +#define IMX7D_REG_ADC_CH_C_CFG2 0x50 +#define IMX7D_REG_ADC_CH_D_CFG1 0x60 +#define IMX7D_REG_ADC_CH_D_CFG2 0x70 +#define IMX7D_REG_ADC_CH_SW_CFG 0x80 +#define IMX7D_REG_ADC_TIMER_UNIT 0x90 +#define IMX7D_REG_ADC_DMA_FIFO 0xa0 +#define IMX7D_REG_ADC_FIFO_STATUS 0xb0 +#define IMX7D_REG_ADC_INT_SIG_EN 0xc0 +#define IMX7D_REG_ADC_INT_EN 0xd0 +#define IMX7D_REG_ADC_INT_STATUS 0xe0 +#define IMX7D_REG_ADC_CHA_B_CNV_RSLT 0xf0 +#define IMX7D_REG_ADC_CHC_D_CNV_RSLT 0x100 +#define IMX7D_REG_ADC_CH_SW_CNV_RSLT 0x110 +#define IMX7D_REG_ADC_DMA_FIFO_DAT 0x120 +#define IMX7D_REG_ADC_ADC_CFG 0x130 + +#define IMX7D_REG_ADC_CHANNEL_CFG2_BASE 0x10 +#define IMX7D_EACH_CHANNEL_REG_OFFSET 0x20 + +#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN (0x1 << 31) +#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE BIT(30) +#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN BIT(29) +#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(x) ((x) << 24) + +#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4 (0x0 << 12) +#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8 (0x1 << 12) +#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16 (0x2 << 12) +#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32 (0x3 << 12) + +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4 (0x0 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8 (0x1 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16 (0x2 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32 (0x3 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64 (0x4 << 29) +#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128 (0x5 << 29) + +#define IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN BIT(31) +#define IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN BIT(1) +#define IMX7D_REG_ADC_ADC_CFG_ADC_EN BIT(0) + +#define IMX7D_REG_ADC_INT_CHA_COV_INT_EN BIT(8) +#define IMX7D_REG_ADC_INT_CHB_COV_INT_EN BIT(9) +#define IMX7D_REG_ADC_INT_CHC_COV_INT_EN BIT(10) +#define IMX7D_REG_ADC_INT_CHD_COV_INT_EN BIT(11) +#define IMX7D_REG_ADC_INT_CHANNEL_INT_EN \ + (IMX7D_REG_ADC_INT_CHA_COV_INT_EN | \ + IMX7D_REG_ADC_INT_CHB_COV_INT_EN | \ + IMX7D_REG_ADC_INT_CHC_COV_INT_EN | \ + IMX7D_REG_ADC_INT_CHD_COV_INT_EN) +#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS 0xf00 +#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT 0xf0000 + +#define IMX7D_ADC_TIMEOUT msecs_to_jiffies(100) + +enum imx7d_adc_clk_pre_div { + IMX7D_ADC_ANALOG_CLK_PRE_DIV_4, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_8, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_16, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_32, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_64, + IMX7D_ADC_ANALOG_CLK_PRE_DIV_128, +}; + +enum imx7d_adc_average_num { + IMX7D_ADC_AVERAGE_NUM_4, + IMX7D_ADC_AVERAGE_NUM_8, + IMX7D_ADC_AVERAGE_NUM_16, + IMX7D_ADC_AVERAGE_NUM_32, +}; + +struct imx7d_adc_feature { + enum imx7d_adc_clk_pre_div clk_pre_div; + enum imx7d_adc_average_num avg_num; + + u32 core_time_unit; /* impact the sample rate */ + + bool average_en; +}; + +struct imx7d_adc { + struct device *dev; + void __iomem *regs; + struct clk *clk; + + u32 vref_uv; + u32 value; + u32 channel; + u32 pre_div_num; + + struct regulator *vref; + struct imx7d_adc_feature adc_feature; + + struct completion completion; +}; + +struct imx7d_adc_analogue_core_clk { + u32 pre_div; + u32 reg_config; +}; + +#define IMX7D_ADC_ANALOGUE_CLK_CONFIG(_pre_div, _reg_conf) { \ + .pre_div = (_pre_div), \ + .reg_config = (_reg_conf), \ +} + +static const struct imx7d_adc_analogue_core_clk imx7d_adc_analogue_clk[] = { + IMX7D_ADC_ANALOGUE_CLK_CONFIG(4, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(8, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(16, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(32, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(64, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64), + IMX7D_ADC_ANALOGUE_CLK_CONFIG(128, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128), +}; + +#define IMX7D_ADC_CHAN(_idx) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ +} + +static const struct iio_chan_spec imx7d_adc_iio_channels[] = { + IMX7D_ADC_CHAN(0), + IMX7D_ADC_CHAN(1), + IMX7D_ADC_CHAN(2), + IMX7D_ADC_CHAN(3), + IMX7D_ADC_CHAN(4), + IMX7D_ADC_CHAN(5), + IMX7D_ADC_CHAN(6), + IMX7D_ADC_CHAN(7), + IMX7D_ADC_CHAN(8), + IMX7D_ADC_CHAN(9), + IMX7D_ADC_CHAN(10), + IMX7D_ADC_CHAN(11), + IMX7D_ADC_CHAN(12), + IMX7D_ADC_CHAN(13), + IMX7D_ADC_CHAN(14), + IMX7D_ADC_CHAN(15), +}; + +static const u32 imx7d_adc_average_num[] = { + IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4, + IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8, + IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16, + IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32, +}; + +static void imx7d_adc_feature_config(struct imx7d_adc *info) +{ + info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4; + info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32; + info->adc_feature.core_time_unit = 1; + info->adc_feature.average_en = true; +} + +static void imx7d_adc_sample_rate_set(struct imx7d_adc *info) +{ + struct imx7d_adc_feature *adc_feature = &info->adc_feature; + struct imx7d_adc_analogue_core_clk adc_analogure_clk; + u32 i; + u32 tmp_cfg1; + u32 sample_rate = 0; + + /* + * Before sample set, disable channel A,B,C,D. Here we + * clear the bit 31 of register REG_ADC_CH_A\B\C\D_CFG1. + */ + for (i = 0; i < 4; i++) { + tmp_cfg1 = + readl(info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET); + tmp_cfg1 &= ~IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN; + writel(tmp_cfg1, + info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET); + } + + adc_analogure_clk = imx7d_adc_analogue_clk[adc_feature->clk_pre_div]; + sample_rate |= adc_analogure_clk.reg_config; + info->pre_div_num = adc_analogure_clk.pre_div; + + sample_rate |= adc_feature->core_time_unit; + writel(sample_rate, info->regs + IMX7D_REG_ADC_TIMER_UNIT); +} + +static void imx7d_adc_hw_init(struct imx7d_adc *info) +{ + u32 cfg; + + /* power up and enable adc analogue core */ + cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG); + cfg &= ~(IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN | + IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN); + cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_EN; + writel(cfg, info->regs + IMX7D_REG_ADC_ADC_CFG); + + /* enable channel A,B,C,D interrupt */ + writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN, + info->regs + IMX7D_REG_ADC_INT_SIG_EN); + writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN, + info->regs + IMX7D_REG_ADC_INT_EN); + + imx7d_adc_sample_rate_set(info); +} + +static void imx7d_adc_channel_set(struct imx7d_adc *info) +{ + u32 cfg1 = 0; + u32 cfg2; + u32 channel; + + channel = info->channel; + + /* the channel choose single conversion, and enable average mode */ + cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN | + IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE); + if (info->adc_feature.average_en) + cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN; + + /* + * physical channel 0 chose logical channel A + * physical channel 1 chose logical channel B + * physical channel 2 chose logical channel C + * physical channel 3 chose logical channel D + */ + cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(channel); + + /* + * read register REG_ADC_CH_A\B\C\D_CFG2, according to the + * channel chosen + */ + cfg2 = readl(info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel + + IMX7D_REG_ADC_CHANNEL_CFG2_BASE); + + cfg2 |= imx7d_adc_average_num[info->adc_feature.avg_num]; + + /* + * write the register REG_ADC_CH_A\B\C\D_CFG2, according to + * the channel chosen + */ + writel(cfg2, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel + + IMX7D_REG_ADC_CHANNEL_CFG2_BASE); + writel(cfg1, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel); +} + +static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info) +{ + /* input clock is always 24MHz */ + u32 input_clk = 24000000; + u32 analogue_core_clk; + u32 core_time_unit = info->adc_feature.core_time_unit; + u32 tmp; + + analogue_core_clk = input_clk / info->pre_div_num; + tmp = (core_time_unit + 1) * 6; + + return analogue_core_clk / tmp; +} + +static int imx7d_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct imx7d_adc *info = iio_priv(indio_dev); + + u32 channel; + long ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + reinit_completion(&info->completion); + + channel = chan->channel & 0x03; + info->channel = channel; + imx7d_adc_channel_set(info); + + ret = wait_for_completion_interruptible_timeout + (&info->completion, IMX7D_ADC_TIMEOUT); + if (ret == 0) { + mutex_unlock(&indio_dev->mlock); + return -ETIMEDOUT; + } + if (ret < 0) { + mutex_unlock(&indio_dev->mlock); + return ret; + } + + *val = info->value; + mutex_unlock(&indio_dev->mlock); + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + info->vref_uv = regulator_get_voltage(info->vref); + *val = info->vref_uv / 1000; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = imx7d_adc_get_sample_rate(info); + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int imx7d_adc_read_data(struct imx7d_adc *info) +{ + u32 channel; + u32 value; + + channel = info->channel & 0x03; + + /* + * channel A and B conversion result share one register, + * bit[27~16] is the channel B conversion result, + * bit[11~0] is the channel A conversion result. + * channel C and D is the same. + */ + if (channel < 2) + value = readl(info->regs + IMX7D_REG_ADC_CHA_B_CNV_RSLT); + else + value = readl(info->regs + IMX7D_REG_ADC_CHC_D_CNV_RSLT); + if (channel & 0x1) /* channel B or D */ + value = (value >> 16) & 0xFFF; + else /* channel A or C */ + value &= 0xFFF; + + return value; +} + +static irqreturn_t imx7d_adc_isr(int irq, void *dev_id) +{ + struct imx7d_adc *info = (struct imx7d_adc *)dev_id; + int status; + + status = readl(info->regs + IMX7D_REG_ADC_INT_STATUS); + if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS) { + info->value = imx7d_adc_read_data(info); + complete(&info->completion); + + /* + * The register IMX7D_REG_ADC_INT_STATUS can't clear + * itself after read operation, need software to write + * 0 to the related bit. Here we clear the channel A/B/C/D + * conversion finished flag. + */ + status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS; + writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS); + } + + /* + * If the channel A/B/C/D conversion timeout, report it and clear these + * timeout flags. + */ + if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT) { + pr_err("%s: ADC got conversion time out interrupt: 0x%08x\n", + dev_name(info->dev), status); + status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT; + writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS); + } + + return IRQ_HANDLED; +} + +static int imx7d_adc_reg_access(struct iio_dev *indio_dev, + unsigned reg, unsigned writeval, + unsigned *readval) +{ + struct imx7d_adc *info = iio_priv(indio_dev); + + if (!readval || reg % 4 || reg > IMX7D_REG_ADC_ADC_CFG) + return -EINVAL; + + *readval = readl(info->regs + reg); + + return 0; +} + +static const struct iio_info imx7d_adc_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = &imx7d_adc_read_raw, + .debugfs_reg_access = &imx7d_adc_reg_access, +}; + +static const struct of_device_id imx7d_adc_match[] = { + { .compatible = "fsl,imx7d-adc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx7d_adc_match); + +static void imx7d_adc_power_down(struct imx7d_adc *info) +{ + u32 adc_cfg; + + adc_cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG); + adc_cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN | + IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN; + adc_cfg &= ~IMX7D_REG_ADC_ADC_CFG_ADC_EN; + writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG); +} + +static int imx7d_adc_probe(struct platform_device *pdev) +{ + struct imx7d_adc *info; + struct iio_dev *indio_dev; + struct resource *mem; + int irq; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); + if (!indio_dev) { + dev_err(&pdev->dev, "Failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + info->dev = &pdev->dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + info->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(info->regs)) { + ret = PTR_ERR(info->regs); + dev_err(&pdev->dev, + "Failed to remap adc memory, err = %d\n", ret); + return ret; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "No irq resource?\n"); + return irq; + } + + info->clk = devm_clk_get(&pdev->dev, "adc"); + if (IS_ERR(info->clk)) { + ret = PTR_ERR(info->clk); + dev_err(&pdev->dev, "Failed getting clock, err = %d\n", ret); + return ret; + } + + info->vref = devm_regulator_get(&pdev->dev, "vref"); + if (IS_ERR(info->vref)) { + ret = PTR_ERR(info->vref); + dev_err(&pdev->dev, + "Failed getting reference voltage, err = %d\n", ret); + return ret; + } + + ret = regulator_enable(info->vref); + if (ret) { + dev_err(&pdev->dev, + "Can't enable adc reference top voltage, err = %d\n", + ret); + return ret; + } + + platform_set_drvdata(pdev, indio_dev); + + init_completion(&info->completion); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &imx7d_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = imx7d_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels); + + ret = clk_prepare_enable(info->clk); + if (ret) { + dev_err(&pdev->dev, + "Could not prepare or enable the clock.\n"); + goto error_adc_clk_enable; + } + + ret = devm_request_irq(info->dev, irq, + imx7d_adc_isr, 0, + dev_name(&pdev->dev), info); + if (ret < 0) { + dev_err(&pdev->dev, "Failed requesting irq, irq = %d\n", irq); + goto error_iio_device_register; + } + + imx7d_adc_feature_config(info); + imx7d_adc_hw_init(info); + + ret = iio_device_register(indio_dev); + if (ret) { + imx7d_adc_power_down(info); + dev_err(&pdev->dev, "Couldn't register the device.\n"); + goto error_iio_device_register; + } + + return 0; + +error_iio_device_register: + clk_disable_unprepare(info->clk); +error_adc_clk_enable: + regulator_disable(info->vref); + + return ret; +} + +static int imx7d_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct imx7d_adc *info = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + imx7d_adc_power_down(info); + + clk_disable_unprepare(info->clk); + regulator_disable(info->vref); + + return 0; +} + +static int __maybe_unused imx7d_adc_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct imx7d_adc *info = iio_priv(indio_dev); + + imx7d_adc_power_down(info); + + clk_disable_unprepare(info->clk); + regulator_disable(info->vref); + + return 0; +} + +static int __maybe_unused imx7d_adc_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct imx7d_adc *info = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(info->vref); + if (ret) { + dev_err(info->dev, + "Can't enable adc reference top voltage, err = %d\n", + ret); + return ret; + } + + ret = clk_prepare_enable(info->clk); + if (ret) { + dev_err(info->dev, + "Could not prepare or enable clock.\n"); + regulator_disable(info->vref); + return ret; + } + + imx7d_adc_hw_init(info); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_suspend, imx7d_adc_resume); + +static struct platform_driver imx7d_adc_driver = { + .probe = imx7d_adc_probe, + .remove = imx7d_adc_remove, + .driver = { + .name = "imx7d_adc", + .of_match_table = imx7d_adc_match, + .pm = &imx7d_adc_pm_ops, + }, +}; + +module_platform_driver(imx7d_adc_driver); + +MODULE_AUTHOR("Haibo Chen "); +MODULE_DESCRIPTION("Freeacale IMX7D ADC driver"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c new file mode 100644 index 0000000..65909d5 --- /dev/null +++ b/drivers/iio/adc/ina2xx-adc.c @@ -0,0 +1,734 @@ +/* + * INA2XX Current and Power Monitors + * + * Copyright 2015 Baylibre SAS. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on linux/drivers/iio/adc/ad7291.c + * Copyright 2010-2011 Analog Devices Inc. + * + * Based on linux/drivers/hwmon/ina2xx.c + * Copyright 2012 Lothar Felten + * + * Licensed under the GPL-2 or later. + * + * IIO driver for INA219-220-226-230-231 + * + * Configurable 7-bit I2C slave address from 0x40 to 0x4F + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* INA2XX registers definition */ +#define INA2XX_CONFIG 0x00 +#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */ +#define INA2XX_BUS_VOLTAGE 0x02 /* readonly */ +#define INA2XX_POWER 0x03 /* readonly */ +#define INA2XX_CURRENT 0x04 /* readonly */ +#define INA2XX_CALIBRATION 0x05 + +#define INA226_ALERT_MASK GENMASK(2, 1) +#define INA266_CVRF BIT(3) + +#define INA2XX_MAX_REGISTERS 8 + +/* settings - depend on use case */ +#define INA219_CONFIG_DEFAULT 0x399F /* PGA=8 */ +#define INA226_CONFIG_DEFAULT 0x4327 +#define INA226_DEFAULT_AVG 4 +#define INA226_DEFAULT_IT 1110 + +#define INA2XX_RSHUNT_DEFAULT 10000 + +/* + * bit mask for reading the averaging setting in the configuration register + * FIXME: use regmap_fields. + */ +#define INA2XX_MODE_MASK GENMASK(3, 0) + +#define INA226_AVG_MASK GENMASK(11, 9) +#define INA226_SHIFT_AVG(val) ((val) << 9) + +/* Integration time for VBus */ +#define INA226_ITB_MASK GENMASK(8, 6) +#define INA226_SHIFT_ITB(val) ((val) << 6) + +/* Integration time for VShunt */ +#define INA226_ITS_MASK GENMASK(5, 3) +#define INA226_SHIFT_ITS(val) ((val) << 3) + +/* Cosmetic macro giving the sampling period for a full P=UxI cycle */ +#define SAMPLING_PERIOD(c) ((c->int_time_vbus + c->int_time_vshunt) \ + * c->avg) + +static bool ina2xx_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return (reg == INA2XX_CONFIG) || (reg > INA2XX_CURRENT); +} + +static bool ina2xx_is_volatile_reg(struct device *dev, unsigned int reg) +{ + return (reg != INA2XX_CONFIG); +} + +static inline bool is_signed_reg(unsigned int reg) +{ + return (reg == INA2XX_SHUNT_VOLTAGE) || (reg == INA2XX_CURRENT); +} + +static const struct regmap_config ina2xx_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = INA2XX_MAX_REGISTERS, + .writeable_reg = ina2xx_is_writeable_reg, + .volatile_reg = ina2xx_is_volatile_reg, +}; + +enum ina2xx_ids { ina219, ina226 }; + +struct ina2xx_config { + u16 config_default; + int calibration_factor; + int shunt_div; + int bus_voltage_shift; + int bus_voltage_lsb; /* uV */ + int power_lsb; /* uW */ +}; + +struct ina2xx_chip_info { + struct regmap *regmap; + struct task_struct *task; + const struct ina2xx_config *config; + struct mutex state_lock; + unsigned int shunt_resistor; + int avg; + s64 prev_ns; /* track buffer capture time, check for underruns */ + int int_time_vbus; /* Bus voltage integration time uS */ + int int_time_vshunt; /* Shunt voltage integration time uS */ + bool allow_async_readout; +}; + +static const struct ina2xx_config ina2xx_config[] = { + [ina219] = { + .config_default = INA219_CONFIG_DEFAULT, + .calibration_factor = 40960000, + .shunt_div = 100, + .bus_voltage_shift = 3, + .bus_voltage_lsb = 4000, + .power_lsb = 20000, + }, + [ina226] = { + .config_default = INA226_CONFIG_DEFAULT, + .calibration_factor = 5120000, + .shunt_div = 400, + .bus_voltage_shift = 0, + .bus_voltage_lsb = 1250, + .power_lsb = 25000, + }, +}; + +static int ina2xx_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct ina2xx_chip_info *chip = iio_priv(indio_dev); + unsigned int regval; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_read(chip->regmap, chan->address, ®val); + if (ret) + return ret; + + if (is_signed_reg(chan->address)) + *val = (s16) regval; + else + *val = regval; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = chip->avg; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + if (chan->address == INA2XX_SHUNT_VOLTAGE) + *val2 = chip->int_time_vshunt; + else + *val2 = chip->int_time_vbus; + + return IIO_VAL_INT_PLUS_MICRO; + + case IIO_CHAN_INFO_SAMP_FREQ: + /* + * Sample freq is read only, it is a consequence of + * 1/AVG*(CT_bus+CT_shunt). + */ + *val = DIV_ROUND_CLOSEST(1000000, SAMPLING_PERIOD(chip)); + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + switch (chan->address) { + case INA2XX_SHUNT_VOLTAGE: + /* processed (mV) = raw*1000/shunt_div */ + *val2 = chip->config->shunt_div; + *val = 1000; + return IIO_VAL_FRACTIONAL; + + case INA2XX_BUS_VOLTAGE: + /* processed (mV) = raw*lsb (uV) / (1000 << shift) */ + *val = chip->config->bus_voltage_lsb; + *val2 = 1000 << chip->config->bus_voltage_shift; + return IIO_VAL_FRACTIONAL; + + case INA2XX_POWER: + /* processed (mW) = raw*lsb (uW) / 1000 */ + *val = chip->config->power_lsb; + *val2 = 1000; + return IIO_VAL_FRACTIONAL; + + case INA2XX_CURRENT: + /* processed (mA) = raw (mA) */ + *val = 1; + return IIO_VAL_INT; + } + } + + return -EINVAL; +} + +/* + * Available averaging rates for ina226. The indices correspond with + * the bit values expected by the chip (according to the ina226 datasheet, + * table 3 AVG bit settings, found at + * http://www.ti.com/lit/ds/symlink/ina226.pdf. + */ +static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 }; + +static int ina226_set_average(struct ina2xx_chip_info *chip, unsigned int val, + unsigned int *config) +{ + int bits; + + if (val > 1024 || val < 1) + return -EINVAL; + + bits = find_closest(val, ina226_avg_tab, + ARRAY_SIZE(ina226_avg_tab)); + + chip->avg = ina226_avg_tab[bits]; + + *config &= ~INA226_AVG_MASK; + *config |= INA226_SHIFT_AVG(bits) & INA226_AVG_MASK; + + return 0; +} + +/* Conversion times in uS */ +static const int ina226_conv_time_tab[] = { 140, 204, 332, 588, 1100, + 2116, 4156, 8244 }; + +static int ina226_set_int_time_vbus(struct ina2xx_chip_info *chip, + unsigned int val_us, unsigned int *config) +{ + int bits; + + if (val_us > 8244 || val_us < 140) + return -EINVAL; + + bits = find_closest(val_us, ina226_conv_time_tab, + ARRAY_SIZE(ina226_conv_time_tab)); + + chip->int_time_vbus = ina226_conv_time_tab[bits]; + + *config &= ~INA226_ITB_MASK; + *config |= INA226_SHIFT_ITB(bits) & INA226_ITB_MASK; + + return 0; +} + +static int ina226_set_int_time_vshunt(struct ina2xx_chip_info *chip, + unsigned int val_us, unsigned int *config) +{ + int bits; + + if (val_us > 8244 || val_us < 140) + return -EINVAL; + + bits = find_closest(val_us, ina226_conv_time_tab, + ARRAY_SIZE(ina226_conv_time_tab)); + + chip->int_time_vshunt = ina226_conv_time_tab[bits]; + + *config &= ~INA226_ITS_MASK; + *config |= INA226_SHIFT_ITS(bits) & INA226_ITS_MASK; + + return 0; +} + +static int ina2xx_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ina2xx_chip_info *chip = iio_priv(indio_dev); + unsigned int config, tmp; + int ret; + + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + + mutex_lock(&chip->state_lock); + + ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config); + if (ret) + goto err; + + tmp = config; + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = ina226_set_average(chip, val, &tmp); + break; + + case IIO_CHAN_INFO_INT_TIME: + if (chan->address == INA2XX_SHUNT_VOLTAGE) + ret = ina226_set_int_time_vshunt(chip, val2, &tmp); + else + ret = ina226_set_int_time_vbus(chip, val2, &tmp); + break; + + default: + ret = -EINVAL; + } + + if (!ret && (tmp != config)) + ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp); +err: + mutex_unlock(&chip->state_lock); + + return ret; +} + +static ssize_t ina2xx_allow_async_readout_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev)); + + return sprintf(buf, "%d\n", chip->allow_async_readout); +} + +static ssize_t ina2xx_allow_async_readout_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev)); + bool val; + int ret; + + ret = strtobool((const char *) buf, &val); + if (ret) + return ret; + + chip->allow_async_readout = val; + + return len; +} + +static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val) +{ + if (val <= 0 || val > chip->config->calibration_factor) + return -EINVAL; + + chip->shunt_resistor = val; + + return 0; +} + +static ssize_t ina2xx_shunt_resistor_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev)); + + return sprintf(buf, "%d\n", chip->shunt_resistor); +} + +static ssize_t ina2xx_shunt_resistor_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev)); + unsigned long val; + int ret; + + ret = kstrtoul((const char *) buf, 10, &val); + if (ret) + return ret; + + ret = set_shunt_resistor(chip, val); + if (ret) + return ret; + + return len; +} + +#define INA2XX_CHAN(_type, _index, _address) { \ + .type = (_type), \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \ + | BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .scan_index = (_index), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +/* + * Sampling Freq is a consequence of the integration times of + * the Voltage channels. + */ +#define INA2XX_CHAN_VOLTAGE(_index, _address) { \ + .type = IIO_VOLTAGE, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_INT_TIME), \ + .scan_index = (_index), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + } \ +} + +static const struct iio_chan_spec ina2xx_channels[] = { + INA2XX_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE), + INA2XX_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE), + INA2XX_CHAN(IIO_POWER, 2, INA2XX_POWER), + INA2XX_CHAN(IIO_CURRENT, 3, INA2XX_CURRENT), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static int ina2xx_work_buffer(struct iio_dev *indio_dev) +{ + struct ina2xx_chip_info *chip = iio_priv(indio_dev); + unsigned short data[8]; + int bit, ret, i = 0; + s64 time_a, time_b; + unsigned int alert; + + time_a = iio_get_time_ns(); + + /* + * Because the timer thread and the chip conversion clock + * are asynchronous, the period difference will eventually + * result in reading V[k-1] again, or skip V[k] at time Tk. + * In order to resync the timer with the conversion process + * we check the ConVersionReadyFlag. + * On hardware that supports using the ALERT pin to toggle a + * GPIO a triggered buffer could be used instead. + * For now, we pay for that extra read of the ALERT register + */ + if (!chip->allow_async_readout) + do { + ret = regmap_read(chip->regmap, INA226_ALERT_MASK, + &alert); + if (ret < 0) + return ret; + + alert &= INA266_CVRF; + } while (!alert); + + /* + * Single register reads: bulk_read will not work with ina226 + * as there is no auto-increment of the address register for + * data length longer than 16bits. + */ + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + unsigned int val; + + ret = regmap_read(chip->regmap, + INA2XX_SHUNT_VOLTAGE + bit, &val); + if (ret < 0) + return ret; + + data[i++] = val; + } + + time_b = iio_get_time_ns(); + + iio_push_to_buffers_with_timestamp(indio_dev, + (unsigned int *)data, time_a); + + chip->prev_ns = time_a; + + return (unsigned long)(time_b - time_a) / 1000; +}; + +static int ina2xx_capture_thread(void *data) +{ + struct iio_dev *indio_dev = data; + struct ina2xx_chip_info *chip = iio_priv(indio_dev); + unsigned int sampling_us = SAMPLING_PERIOD(chip); + int buffer_us; + + /* + * Poll a bit faster than the chip internal Fs, in case + * we wish to sync with the conversion ready flag. + */ + if (!chip->allow_async_readout) + sampling_us -= 200; + + do { + buffer_us = ina2xx_work_buffer(indio_dev); + if (buffer_us < 0) + return buffer_us; + + if (sampling_us > buffer_us) + udelay(sampling_us - buffer_us); + + } while (!kthread_should_stop()); + + return 0; +} + +static int ina2xx_buffer_enable(struct iio_dev *indio_dev) +{ + struct ina2xx_chip_info *chip = iio_priv(indio_dev); + unsigned int sampling_us = SAMPLING_PERIOD(chip); + + dev_dbg(&indio_dev->dev, "Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n", + (unsigned int)(*indio_dev->active_scan_mask), + 1000000 / sampling_us, chip->avg); + + dev_dbg(&indio_dev->dev, "Expected work period: %u us\n", sampling_us); + dev_dbg(&indio_dev->dev, "Async readout mode: %d\n", + chip->allow_async_readout); + + chip->prev_ns = iio_get_time_ns(); + + chip->task = kthread_run(ina2xx_capture_thread, (void *)indio_dev, + "%s:%d-%uus", indio_dev->name, indio_dev->id, + sampling_us); + + return PTR_ERR_OR_ZERO(chip->task); +} + +static int ina2xx_buffer_disable(struct iio_dev *indio_dev) +{ + struct ina2xx_chip_info *chip = iio_priv(indio_dev); + + if (chip->task) { + kthread_stop(chip->task); + chip->task = NULL; + } + + return 0; +} + +static const struct iio_buffer_setup_ops ina2xx_setup_ops = { + .postenable = &ina2xx_buffer_enable, + .predisable = &ina2xx_buffer_disable, +}; + +static int ina2xx_debug_reg(struct iio_dev *indio_dev, + unsigned reg, unsigned writeval, unsigned *readval) +{ + struct ina2xx_chip_info *chip = iio_priv(indio_dev); + + if (!readval) + return regmap_write(chip->regmap, reg, writeval); + + return regmap_read(chip->regmap, reg, readval); +} + +/* Possible integration times for vshunt and vbus */ +static IIO_CONST_ATTR_INT_TIME_AVAIL("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244"); + +static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR, + ina2xx_allow_async_readout_show, + ina2xx_allow_async_readout_store, 0); + +static IIO_DEVICE_ATTR(in_shunt_resistor, S_IRUGO | S_IWUSR, + ina2xx_shunt_resistor_show, + ina2xx_shunt_resistor_store, 0); + +static struct attribute *ina2xx_attributes[] = { + &iio_dev_attr_in_allow_async_readout.dev_attr.attr, + &iio_const_attr_integration_time_available.dev_attr.attr, + &iio_dev_attr_in_shunt_resistor.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ina2xx_attribute_group = { + .attrs = ina2xx_attributes, +}; + +static const struct iio_info ina2xx_info = { + .driver_module = THIS_MODULE, + .attrs = &ina2xx_attribute_group, + .read_raw = ina2xx_read_raw, + .write_raw = ina2xx_write_raw, + .debugfs_reg_access = ina2xx_debug_reg, +}; + +/* Initialize the configuration and calibration registers. */ +static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config) +{ + u16 regval; + int ret; + + ret = regmap_write(chip->regmap, INA2XX_CONFIG, config); + if (ret) + return ret; + + /* + * Set current LSB to 1mA, shunt is in uOhms + * (equation 13 in datasheet). We hardcode a Current_LSB + * of 1.0 x10-6. The only remaining parameter is RShunt. + * There is no need to expose the CALIBRATION register + * to the user for now. + */ + regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor, + chip->shunt_resistor); + + return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval); +} + +static int ina2xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ina2xx_chip_info *chip; + struct iio_dev *indio_dev; + struct iio_buffer *buffer; + unsigned int val; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); + if (!indio_dev) + return -ENOMEM; + + chip = iio_priv(indio_dev); + + /* This is only used for device removal purposes. */ + i2c_set_clientdata(client, indio_dev); + + chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config); + if (IS_ERR(chip->regmap)) { + dev_err(&client->dev, "failed to allocate register map\n"); + return PTR_ERR(chip->regmap); + } + + chip->config = &ina2xx_config[id->driver_data]; + + mutex_init(&chip->state_lock); + + if (of_property_read_u32(client->dev.of_node, + "shunt-resistor", &val) < 0) { + struct ina2xx_platform_data *pdata = + dev_get_platdata(&client->dev); + + if (pdata) + val = pdata->shunt_uohms; + else + val = INA2XX_RSHUNT_DEFAULT; + } + + ret = set_shunt_resistor(chip, val); + if (ret) + return ret; + + /* Patch the current config register with default. */ + val = chip->config->config_default; + + if (id->driver_data == ina226) { + ina226_set_average(chip, INA226_DEFAULT_AVG, &val); + ina226_set_int_time_vbus(chip, INA226_DEFAULT_IT, &val); + ina226_set_int_time_vshunt(chip, INA226_DEFAULT_IT, &val); + } + + ret = ina2xx_init(chip, val); + if (ret) { + dev_err(&client->dev, "error configuring the device\n"); + return ret; + } + + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + indio_dev->dev.parent = &client->dev; + indio_dev->channels = ina2xx_channels; + indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels); + indio_dev->name = id->name; + indio_dev->info = &ina2xx_info; + indio_dev->setup_ops = &ina2xx_setup_ops; + + buffer = devm_iio_kfifo_allocate(&indio_dev->dev); + if (!buffer) + return -ENOMEM; + + iio_device_attach_buffer(indio_dev, buffer); + + return iio_device_register(indio_dev); +} + +static int ina2xx_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ina2xx_chip_info *chip = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + /* Powerdown */ + return regmap_update_bits(chip->regmap, INA2XX_CONFIG, + INA2XX_MODE_MASK, 0); +} + +static const struct i2c_device_id ina2xx_id[] = { + {"ina219", ina219}, + {"ina220", ina219}, + {"ina226", ina226}, + {"ina230", ina226}, + {"ina231", ina226}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ina2xx_id); + +static struct i2c_driver ina2xx_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .probe = ina2xx_probe, + .remove = ina2xx_remove, + .id_table = ina2xx_id, +}; +module_i2c_driver(ina2xx_driver); + +MODULE_AUTHOR("Marc Titinger "); +MODULE_DESCRIPTION("Texas Instruments INA2XX ADC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 929508e..998dc3c 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -1386,7 +1386,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11644] = { .bits = 12, - .int_vref_mv = 2048, + .int_vref_mv = 4096, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1396,7 +1396,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11645] = { .bits = 12, - .int_vref_mv = 4096, + .int_vref_mv = 2048, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1406,7 +1406,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11646] = { .bits = 10, - .int_vref_mv = 2048, + .int_vref_mv = 4096, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1416,7 +1416,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = { }, [max11647] = { .bits = 10, - .int_vref_mv = 4096, + .int_vref_mv = 2048, .mode_list = max11644_mode_list, .num_modes = ARRAY_SIZE(max11644_mode_list), .default_mode = s0to1, @@ -1680,6 +1680,10 @@ static const struct i2c_device_id max1363_id[] = { { "max11615", max11615 }, { "max11616", max11616 }, { "max11617", max11617 }, + { "max11644", max11644 }, + { "max11645", max11645 }, + { "max11646", max11646 }, + { "max11647", max11647 }, {} }; diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index 8569c8e..a850ca7 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -187,26 +187,27 @@ out: .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } -#define MCP320X_VOLTAGE_CHANNEL_DIFF(num) \ +#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ - .channel = (num * 2), \ - .channel2 = (num * 2 + 1), \ - .address = (num * 2), \ + .channel = (chan1), \ + .channel2 = (chan2), \ + .address = (chan1), \ .differential = 1, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } static const struct iio_chan_spec mcp3201_channels[] = { - MCP320X_VOLTAGE_CHANNEL_DIFF(0), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), }; static const struct iio_chan_spec mcp3202_channels[] = { MCP320X_VOLTAGE_CHANNEL(0), MCP320X_VOLTAGE_CHANNEL(1), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), }; static const struct iio_chan_spec mcp3204_channels[] = { @@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = { MCP320X_VOLTAGE_CHANNEL(1), MCP320X_VOLTAGE_CHANNEL(2), MCP320X_VOLTAGE_CHANNEL(3), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), - MCP320X_VOLTAGE_CHANNEL_DIFF(1), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), }; static const struct iio_chan_spec mcp3208_channels[] = { @@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = { MCP320X_VOLTAGE_CHANNEL(5), MCP320X_VOLTAGE_CHANNEL(6), MCP320X_VOLTAGE_CHANNEL(7), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), - MCP320X_VOLTAGE_CHANNEL_DIFF(1), - MCP320X_VOLTAGE_CHANNEL_DIFF(2), - MCP320X_VOLTAGE_CHANNEL_DIFF(3), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), + MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5), + MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4), + MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7), + MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6), }; static const struct iio_info mcp320x_info = { @@ -354,6 +361,7 @@ static int mcp320x_remove(struct spi_device *spi) #if defined(CONFIG_OF) static const struct of_device_id mcp320x_dt_ids[] = { + /* NOTE: The use of compatibles with no vendor prefix is deprecated. */ { .compatible = "mcp3001", .data = &mcp320x_chip_infos[mcp3001], @@ -382,6 +390,33 @@ static const struct of_device_id mcp320x_dt_ids[] = { .compatible = "mcp3301", .data = &mcp320x_chip_infos[mcp3301], }, { + .compatible = "microchip,mcp3001", + .data = &mcp320x_chip_infos[mcp3001], + }, { + .compatible = "microchip,mcp3002", + .data = &mcp320x_chip_infos[mcp3002], + }, { + .compatible = "microchip,mcp3004", + .data = &mcp320x_chip_infos[mcp3004], + }, { + .compatible = "microchip,mcp3008", + .data = &mcp320x_chip_infos[mcp3008], + }, { + .compatible = "microchip,mcp3201", + .data = &mcp320x_chip_infos[mcp3201], + }, { + .compatible = "microchip,mcp3202", + .data = &mcp320x_chip_infos[mcp3202], + }, { + .compatible = "microchip,mcp3204", + .data = &mcp320x_chip_infos[mcp3204], + }, { + .compatible = "microchip,mcp3208", + .data = &mcp320x_chip_infos[mcp3208], + }, { + .compatible = "microchip,mcp3301", + .data = &mcp320x_chip_infos[mcp3301], + }, { } }; MODULE_DEVICE_TABLE(of, mcp320x_dt_ids); diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index 3555122..d7b36ef 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -1,11 +1,12 @@ /* - * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family + * mcp3422.c - driver for the Microchip mcp3421/2/3/4/5/6/7/8 chip family * * Copyright (C) 2013, Angelo Compagnucci * Author: Angelo Compagnucci * * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf * http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf + * http://ww1.microchip.com/downloads/en/DeviceDoc/22072b.pdf * * This driver exports the value of analog input voltage to sysfs, the * voltage unit is nV. @@ -305,6 +306,10 @@ static const struct attribute_group mcp3422_attribute_group = { .attrs = mcp3422_attributes, }; +static const struct iio_chan_spec mcp3421_channels[] = { + MCP3422_CHAN(0), +}; + static const struct iio_chan_spec mcp3422_channels[] = { MCP3422_CHAN(0), MCP3422_CHAN(1), @@ -334,7 +339,7 @@ static int mcp3422_probe(struct i2c_client *client, u8 config; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!indio_dev) @@ -352,6 +357,11 @@ static int mcp3422_probe(struct i2c_client *client, indio_dev->info = &mcp3422_info; switch (adc->id) { + case 1: + case 5: + indio_dev->channels = mcp3421_channels; + indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels); + break; case 2: case 3: case 6: @@ -383,9 +393,11 @@ static int mcp3422_probe(struct i2c_client *client, } static const struct i2c_device_id mcp3422_id[] = { + { "mcp3421", 1 }, { "mcp3422", 2 }, { "mcp3423", 3 }, { "mcp3424", 4 }, + { "mcp3425", 5 }, { "mcp3426", 6 }, { "mcp3427", 7 }, { "mcp3428", 8 }, @@ -412,5 +424,5 @@ static struct i2c_driver mcp3422_driver = { module_i2c_driver(mcp3422_driver); MODULE_AUTHOR("Angelo Compagnucci "); -MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver"); +MODULE_DESCRIPTION("Microchip mcp3421/2/3/4/5/6/7/8 driver"); MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c new file mode 100644 index 0000000..33051b8 --- /dev/null +++ b/drivers/iio/adc/mxs-lradc.c @@ -0,0 +1,1775 @@ +/* + * Freescale MXS LRADC driver + * + * Copyright (c) 2012 DENX Software Engineering, GmbH. + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "mxs-lradc" + +#define LRADC_MAX_DELAY_CHANS 4 +#define LRADC_MAX_MAPPED_CHANS 8 +#define LRADC_MAX_TOTAL_CHANS 16 + +#define LRADC_DELAY_TIMER_HZ 2000 + +/* + * Make this runtime configurable if necessary. Currently, if the buffered mode + * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before + * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) + * seconds. The result is that the samples arrive every 500mS. + */ +#define LRADC_DELAY_TIMER_PER 200 +#define LRADC_DELAY_TIMER_LOOP 5 + +/* + * Once the pen touches the touchscreen, the touchscreen switches from + * IRQ-driven mode to polling mode to prevent interrupt storm. The polling + * is realized by worker thread, which is called every 20 or so milliseconds. + * This gives the touchscreen enough fluency and does not strain the system + * too much. + */ +#define LRADC_TS_SAMPLE_DELAY_MS 5 + +/* + * The LRADC reads the following amount of samples from each touchscreen + * channel and the driver then computes average of these. + */ +#define LRADC_TS_SAMPLE_AMOUNT 4 + +enum mxs_lradc_id { + IMX23_LRADC, + IMX28_LRADC, +}; + +static const char * const mx23_lradc_irq_names[] = { + "mxs-lradc-touchscreen", + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", + "mxs-lradc-channel6", + "mxs-lradc-channel7", +}; + +static const char * const mx28_lradc_irq_names[] = { + "mxs-lradc-touchscreen", + "mxs-lradc-thresh0", + "mxs-lradc-thresh1", + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", + "mxs-lradc-channel6", + "mxs-lradc-channel7", + "mxs-lradc-button0", + "mxs-lradc-button1", +}; + +struct mxs_lradc_of_config { + const int irq_count; + const char * const *irq_name; + const u32 *vref_mv; +}; + +#define VREF_MV_BASE 1850 + +static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = { + VREF_MV_BASE, /* CH0 */ + VREF_MV_BASE, /* CH1 */ + VREF_MV_BASE, /* CH2 */ + VREF_MV_BASE, /* CH3 */ + VREF_MV_BASE, /* CH4 */ + VREF_MV_BASE, /* CH5 */ + VREF_MV_BASE * 2, /* CH6 VDDIO */ + VREF_MV_BASE * 4, /* CH7 VBATT */ + VREF_MV_BASE, /* CH8 Temp sense 0 */ + VREF_MV_BASE, /* CH9 Temp sense 1 */ + VREF_MV_BASE, /* CH10 */ + VREF_MV_BASE, /* CH11 */ + VREF_MV_BASE, /* CH12 USB_DP */ + VREF_MV_BASE, /* CH13 USB_DN */ + VREF_MV_BASE, /* CH14 VBG */ + VREF_MV_BASE * 4, /* CH15 VDD5V */ +}; + +static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = { + VREF_MV_BASE, /* CH0 */ + VREF_MV_BASE, /* CH1 */ + VREF_MV_BASE, /* CH2 */ + VREF_MV_BASE, /* CH3 */ + VREF_MV_BASE, /* CH4 */ + VREF_MV_BASE, /* CH5 */ + VREF_MV_BASE, /* CH6 */ + VREF_MV_BASE * 4, /* CH7 VBATT */ + VREF_MV_BASE, /* CH8 Temp sense 0 */ + VREF_MV_BASE, /* CH9 Temp sense 1 */ + VREF_MV_BASE * 2, /* CH10 VDDIO */ + VREF_MV_BASE, /* CH11 VTH */ + VREF_MV_BASE * 2, /* CH12 VDDA */ + VREF_MV_BASE, /* CH13 VDDD */ + VREF_MV_BASE, /* CH14 VBG */ + VREF_MV_BASE * 4, /* CH15 VDD5V */ +}; + +static const struct mxs_lradc_of_config mxs_lradc_of_config[] = { + [IMX23_LRADC] = { + .irq_count = ARRAY_SIZE(mx23_lradc_irq_names), + .irq_name = mx23_lradc_irq_names, + .vref_mv = mx23_vref_mv, + }, + [IMX28_LRADC] = { + .irq_count = ARRAY_SIZE(mx28_lradc_irq_names), + .irq_name = mx28_lradc_irq_names, + .vref_mv = mx28_vref_mv, + }, +}; + +enum mxs_lradc_ts { + MXS_LRADC_TOUCHSCREEN_NONE = 0, + MXS_LRADC_TOUCHSCREEN_4WIRE, + MXS_LRADC_TOUCHSCREEN_5WIRE, +}; + +/* + * Touchscreen handling + */ +enum lradc_ts_plate { + LRADC_TOUCH = 0, + LRADC_SAMPLE_X, + LRADC_SAMPLE_Y, + LRADC_SAMPLE_PRESSURE, + LRADC_SAMPLE_VALID, +}; + +enum mxs_lradc_divbytwo { + MXS_LRADC_DIV_DISABLED = 0, + MXS_LRADC_DIV_ENABLED, +}; + +struct mxs_lradc_scale { + unsigned int integer; + unsigned int nano; +}; + +struct mxs_lradc { + struct device *dev; + void __iomem *base; + int irq[13]; + + struct clk *clk; + + u32 *buffer; + struct iio_trigger *trig; + + struct mutex lock; + + struct completion completion; + + const u32 *vref_mv; + struct mxs_lradc_scale scale_avail[LRADC_MAX_TOTAL_CHANS][2]; + unsigned long is_divided; + + /* + * When the touchscreen is enabled, we give it two private virtual + * channels: #6 and #7. This means that only 6 virtual channels (instead + * of 8) will be available for buffered capture. + */ +#define TOUCHSCREEN_VCHANNEL1 7 +#define TOUCHSCREEN_VCHANNEL2 6 +#define BUFFER_VCHANS_LIMITED 0x3f +#define BUFFER_VCHANS_ALL 0xff + u8 buffer_vchans; + + /* + * Furthermore, certain LRADC channels are shared between touchscreen + * and/or touch-buttons and generic LRADC block. Therefore when using + * either of these, these channels are not available for the regular + * sampling. The shared channels are as follows: + * + * CH0 -- Touch button #0 + * CH1 -- Touch button #1 + * CH2 -- Touch screen XPUL + * CH3 -- Touch screen YPLL + * CH4 -- Touch screen XNUL + * CH5 -- Touch screen YNLR + * CH6 -- Touch screen WIPER (5-wire only) + * + * The bit fields below represents which parts of the LRADC block are + * switched into special mode of operation. These channels can not + * be sampled as regular LRADC channels. The driver will refuse any + * attempt to sample these channels. + */ +#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0)) +#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) +#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) + enum mxs_lradc_ts use_touchscreen; + bool use_touchbutton; + + struct input_dev *ts_input; + + enum mxs_lradc_id soc; + enum lradc_ts_plate cur_plate; /* state machine */ + bool ts_valid; + unsigned ts_x_pos; + unsigned ts_y_pos; + unsigned ts_pressure; + + /* handle touchscreen's physical behaviour */ + /* samples per coordinate */ + unsigned over_sample_cnt; + /* time clocks between samples */ + unsigned over_sample_delay; + /* time in clocks to wait after the plates where switched */ + unsigned settling_delay; +}; + +#define LRADC_CTRL0 0x00 +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23) +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22) +# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21) +# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20) +# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19) +# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18) +# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17) +# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16) + +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20) +# define LRADC_CTRL0_MX23_YM BIT(19) +# define LRADC_CTRL0_MX23_XM BIT(18) +# define LRADC_CTRL0_MX23_YP BIT(17) +# define LRADC_CTRL0_MX23_XP BIT(16) + +# define LRADC_CTRL0_MX28_PLATE_MASK \ + (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \ + LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \ + LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \ + LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW) + +# define LRADC_CTRL0_MX23_PLATE_MASK \ + (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \ + LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \ + LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP) + +#define LRADC_CTRL1 0x10 +#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24) +#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) +#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) +#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16) +#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 +#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8) +#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) +#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff +#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff +#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0 + +#define LRADC_CTRL2 0x20 +#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24 +#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15) + +#define LRADC_STATUS 0x40 +#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0) + +#define LRADC_CH(n) (0x50 + (0x10 * (n))) +#define LRADC_CH_ACCUMULATE BIT(29) +#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) +#define LRADC_CH_NUM_SAMPLES_OFFSET 24 +#define LRADC_CH_NUM_SAMPLES(x) \ + ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) +#define LRADC_CH_VALUE_MASK 0x3ffff +#define LRADC_CH_VALUE_OFFSET 0 + +#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) +#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24) +#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 +#define LRADC_DELAY_TRIGGER(x) \ + (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ + LRADC_DELAY_TRIGGER_LRADCS_MASK) +#define LRADC_DELAY_KICK BIT(20) +#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) +#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 +#define LRADC_DELAY_TRIGGER_DELAYS(x) \ + (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ + LRADC_DELAY_TRIGGER_DELAYS_MASK) +#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) +#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 +#define LRADC_DELAY_LOOP(x) \ + (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ + LRADC_DELAY_LOOP_COUNT_MASK) +#define LRADC_DELAY_DELAY_MASK 0x7ff +#define LRADC_DELAY_DELAY_OFFSET 0 +#define LRADC_DELAY_DELAY(x) \ + (((x) << LRADC_DELAY_DELAY_OFFSET) & \ + LRADC_DELAY_DELAY_MASK) + +#define LRADC_CTRL4 0x140 +#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) +#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) +#define LRADC_CTRL4_LRADCSELECT(n, x) \ + (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ + LRADC_CTRL4_LRADCSELECT_MASK(n)) + +#define LRADC_RESOLUTION 12 +#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) + +static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg + STMP_OFFSET_REG_SET); +} + +static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR); +} + +static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg); +} + +static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_PLATE_MASK; + return LRADC_CTRL0_MX28_PLATE_MASK; +} + +static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK; + return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK; +} + +static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL1_MX23_LRADC_IRQ_MASK; + return LRADC_CTRL1_MX28_LRADC_IRQ_MASK; +} + +static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE; + return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE; +} + +static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM; + return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW; +} + +static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM; + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW; +} + +static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM; + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW; +} + +static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc) +{ + return !!(readl(lradc->base + LRADC_STATUS) & + LRADC_STATUS_TOUCH_DETECT_RAW); +} + +static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch, + unsigned ch) +{ + mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch), + LRADC_CTRL4); + mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4); +} + +static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) +{ + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1), + LRADC_CH(ch)); + + /* + * from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch)); + + /* + * prepare the delay/loop unit according to the oversampling count + * + * from the datasheet: + * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1, + * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise, + * the LRADC will not trigger the delay group." + */ + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) | + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1); + + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(lradc->settling_delay), + LRADC_DELAY(2)); +} + +/* + * Pressure detection is special: + * We want to do both required measurements for the pressure detection in + * one turn. Use the hardware features to chain both conversions and let the + * hardware report one interrupt if both conversions are done + */ +static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1, + unsigned ch2) +{ + u32 reg; + + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + reg = LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1); + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1)); + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2)); + + /* + * from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1)); + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2)); + + /* prepare the delay/loop unit according to the oversampling count */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(1 << ch1) | + LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */ + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1); + + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2)); +} + +static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc, + unsigned channel) +{ + u32 reg; + unsigned num_samples, val; + + reg = readl(lradc->base + LRADC_CH(channel)); + if (reg & LRADC_CH_ACCUMULATE) + num_samples = lradc->over_sample_cnt; + else + num_samples = 1; + + val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET; + return val / num_samples; +} + +static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc, + unsigned ch1, unsigned ch2) +{ + u32 reg, mask; + unsigned pressure, m1, m2; + + mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2); + reg = readl(lradc->base + LRADC_CTRL1) & mask; + + while (reg != mask) { + reg = readl(lradc->base + LRADC_CTRL1) & mask; + dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg); + } + + m1 = mxs_lradc_read_raw_channel(lradc, ch1); + m2 = mxs_lradc_read_raw_channel(lradc, ch2); + + if (m2 == 0) { + dev_warn(lradc->dev, "Cannot calculate pressure\n"); + return 1 << (LRADC_RESOLUTION - 1); + } + + /* simply scale the value from 0 ... max ADC resolution */ + pressure = m1; + pressure *= (1 << LRADC_RESOLUTION); + pressure /= m2; + + dev_dbg(lradc->dev, "Pressure = %u\n", pressure); + return pressure; +} + +#define TS_CH_XP 2 +#define TS_CH_YP 3 +#define TS_CH_XM 4 +#define TS_CH_YM 5 + +/* + * YP(open)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(weak+) XM(open) + * + * "weak+" means 200k Ohm VDDIO + * (-) means GND + */ +static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc) +{ + /* + * In order to detect a touch event the 'touch detect enable' bit + * enables: + * - a weak pullup to the X+ connector + * - a strong ground at the Y- connector + */ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc), + LRADC_CTRL0); +} + +/* + * YP(meas)--+-------------+ + * | |--+ + * | | | + * YM(open)--+-------------+ | + * +--------------+ + * | | + * XP(+) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_X; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP); + mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(open) XM(meas) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_Y; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM); + mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(meas)--+-------------+ | + * +--------------+ + * | | + * XP(meas) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_PRESSURE; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM); + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP); + mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); +} + +static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) +{ + mxs_lradc_setup_touch_detection(lradc); + + lradc->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); +} + +static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, + LRADC_CTRL1); + mxs_lradc_reg_set(lradc, + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), + LRADC_CTRL1); + /* + * start with the Y-pos, because it uses nearly the same plate + * settings like the touch detection + */ + mxs_lradc_prepare_y_pos(lradc); +} + +static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc) +{ + input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos); + input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos); + input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure); + input_report_key(lradc->ts_input, BTN_TOUCH, 1); + input_sync(lradc->ts_input); +} + +static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc) +{ + mxs_lradc_setup_touch_detection(lradc); + lradc->cur_plate = LRADC_SAMPLE_VALID; + /* + * start a dummy conversion to burn time to settle the signals + * note: we are not interested in the conversion's value + */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1)); + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), + LRADC_CTRL1); + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) | + LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ + LRADC_DELAY(2)); +} + +/* + * in order to avoid false measurements, report only samples where + * the surface is still touched after the position measurement + */ +static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) +{ + /* if it is still touched, report the sample */ + if (valid && mxs_lradc_check_touch_event(lradc)) { + lradc->ts_valid = true; + mxs_lradc_report_ts_event(lradc); + } + + /* if it is even still touched, continue with the next measurement */ + if (mxs_lradc_check_touch_event(lradc)) { + mxs_lradc_prepare_y_pos(lradc); + return; + } + + if (lradc->ts_valid) { + /* signal the release */ + lradc->ts_valid = false; + input_report_key(lradc->ts_input, BTN_TOUCH, 0); + input_sync(lradc->ts_input); + } + + /* if it is released, wait for the next touch via IRQ */ + lradc->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), + LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); +} + +/* touchscreen's state machine */ +static void mxs_lradc_handle_touch(struct mxs_lradc *lradc) +{ + switch (lradc->cur_plate) { + case LRADC_TOUCH: + if (mxs_lradc_check_touch_event(lradc)) + mxs_lradc_start_touch_event(lradc); + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, + LRADC_CTRL1); + return; + + case LRADC_SAMPLE_Y: + lradc->ts_y_pos = + mxs_lradc_read_raw_channel(lradc, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_prepare_x_pos(lradc); + return; + + case LRADC_SAMPLE_X: + lradc->ts_x_pos = + mxs_lradc_read_raw_channel(lradc, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_prepare_pressure(lradc); + return; + + case LRADC_SAMPLE_PRESSURE: + lradc->ts_pressure = + mxs_lradc_read_ts_pressure(lradc, + TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_complete_touch_event(lradc); + return; + + case LRADC_SAMPLE_VALID: + mxs_lradc_finish_touch_event(lradc, 1); + break; + } +} + +/* + * Raw I/O operations + */ +static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + int ret; + + /* + * See if there is no buffered operation in progress. If there is, simply + * bail out. This can be improved to support both buffered and raw IO at + * the same time, yet the code becomes horribly complicated. Therefore I + * applied KISS principle here. + */ + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + reinit_completion(&lradc->completion); + + /* + * No buffered operation in progress, map the channel and trigger it. + * Virtual channel 0 is always used here as the others are always not + * used if doing raw sampling. + */ + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), + LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0); + + /* Enable / disable the divider per requirement */ + if (test_bit(chan, &lradc->is_divided)) + mxs_lradc_reg_set(lradc, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + else + mxs_lradc_reg_clear(lradc, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + + /* Clean the slot's previous content, then set new one. */ + mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), + LRADC_CTRL4); + mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4); + + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0)); + + /* Enable the IRQ and start sampling the channel. */ + mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); + mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0); + + /* Wait for completion on the channel, 1 second max. */ + ret = wait_for_completion_killable_timeout(&lradc->completion, HZ); + if (!ret) + ret = -ETIMEDOUT; + if (ret < 0) + goto err; + + /* Read the data. */ + *val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; + ret = IIO_VAL_INT; + +err: + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); + + mutex_unlock(&lradc->lock); + + return ret; +} + +static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val) +{ + int ret, min, max; + + ret = mxs_lradc_read_single(iio_dev, 8, &min); + if (ret != IIO_VAL_INT) + return ret; + + ret = mxs_lradc_read_single(iio_dev, 9, &max); + if (ret != IIO_VAL_INT) + return ret; + + *val = max - min; + + return IIO_VAL_INT; +} + +static int mxs_lradc_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long m) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + if (chan->type == IIO_TEMP) + return mxs_lradc_read_temp(iio_dev, val); + + return mxs_lradc_read_single(iio_dev, chan->channel, val); + + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_TEMP) { + /* + * From the datasheet, we have to multiply by 1.012 and + * divide by 4 + */ + *val = 0; + *val2 = 253000; + return IIO_VAL_INT_PLUS_MICRO; + } + + *val = lradc->vref_mv[chan->channel]; + *val2 = chan->scan_type.realbits - + test_bit(chan->channel, &lradc->is_divided); + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_OFFSET: + if (chan->type == IIO_TEMP) { + /* + * The calculated value from the ADC is in Kelvin, we + * want Celsius for hwmon so the offset is -273.15 + * The offset is applied before scaling so it is + * actually -213.15 * 4 / 1.012 = -1079.644268 + */ + *val = -1079; + *val2 = 644268; + + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; + + default: + break; + } + + return -EINVAL; +} + +static int mxs_lradc_write_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long m) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + struct mxs_lradc_scale *scale_avail = + lradc->scale_avail[chan->channel]; + int ret; + + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + switch (m) { + case IIO_CHAN_INFO_SCALE: + ret = -EINVAL; + if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && + val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { + /* divider by two disabled */ + clear_bit(chan->channel, &lradc->is_divided); + ret = 0; + } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && + val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { + /* divider by two enabled */ + set_bit(chan->channel, &lradc->is_divided); + ret = 0; + } + + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&lradc->lock); + + return ret; +} + +static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + long m) +{ + return IIO_VAL_INT_PLUS_NANO; +} + +static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev, + struct device_attribute *attr, + char *buf, + int ch) +{ + struct iio_dev *iio = dev_to_iio_dev(dev); + struct mxs_lradc *lradc = iio_priv(iio); + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++) + len += sprintf(buf + len, "%u.%09u ", + lradc->scale_avail[ch][i].integer, + lradc->scale_avail[ch][i].nano); + + len += sprintf(buf + len, "\n"); + + return len; +} + +static ssize_t mxs_lradc_show_scale_available(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); + + return mxs_lradc_show_scale_available_ch(dev, attr, buf, + iio_attr->address); +} + +#define SHOW_SCALE_AVAILABLE_ATTR(ch) \ +static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO, \ + mxs_lradc_show_scale_available, NULL, ch) + +SHOW_SCALE_AVAILABLE_ATTR(0); +SHOW_SCALE_AVAILABLE_ATTR(1); +SHOW_SCALE_AVAILABLE_ATTR(2); +SHOW_SCALE_AVAILABLE_ATTR(3); +SHOW_SCALE_AVAILABLE_ATTR(4); +SHOW_SCALE_AVAILABLE_ATTR(5); +SHOW_SCALE_AVAILABLE_ATTR(6); +SHOW_SCALE_AVAILABLE_ATTR(7); +SHOW_SCALE_AVAILABLE_ATTR(10); +SHOW_SCALE_AVAILABLE_ATTR(11); +SHOW_SCALE_AVAILABLE_ATTR(12); +SHOW_SCALE_AVAILABLE_ATTR(13); +SHOW_SCALE_AVAILABLE_ATTR(14); +SHOW_SCALE_AVAILABLE_ATTR(15); + +static struct attribute *mxs_lradc_attributes[] = { + &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage2_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage3_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage4_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage5_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage6_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage7_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage10_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage11_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage12_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage13_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage14_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage15_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group mxs_lradc_attribute_group = { + .attrs = mxs_lradc_attributes, +}; + +static const struct iio_info mxs_lradc_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = mxs_lradc_read_raw, + .write_raw = mxs_lradc_write_raw, + .write_raw_get_fmt = mxs_lradc_write_raw_get_fmt, + .attrs = &mxs_lradc_attribute_group, +}; + +static int mxs_lradc_ts_open(struct input_dev *dev) +{ + struct mxs_lradc *lradc = input_get_drvdata(dev); + + /* Enable the touch-detect circuitry. */ + mxs_lradc_enable_touch_detection(lradc); + + return 0; +} + +static void mxs_lradc_disable_ts(struct mxs_lradc *lradc) +{ + /* stop all interrupts from firing */ + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); + + /* Power-down touchscreen touch-detect circuitry. */ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); +} + +static void mxs_lradc_ts_close(struct input_dev *dev) +{ + struct mxs_lradc *lradc = input_get_drvdata(dev); + + mxs_lradc_disable_ts(lradc); +} + +static int mxs_lradc_ts_register(struct mxs_lradc *lradc) +{ + struct input_dev *input; + struct device *dev = lradc->dev; + int ret; + + if (!lradc->use_touchscreen) + return 0; + + input = input_allocate_device(); + if (!input) + return -ENOMEM; + + input->name = DRIVER_NAME; + input->id.bustype = BUS_HOST; + input->dev.parent = dev; + input->open = mxs_lradc_ts_open; + input->close = mxs_lradc_ts_close; + + __set_bit(EV_ABS, input->evbit); + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); + input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, + 0, 0); + + lradc->ts_input = input; + input_set_drvdata(input, lradc); + ret = input_register_device(input); + if (ret) + input_free_device(lradc->ts_input); + + return ret; +} + +static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc) +{ + if (!lradc->use_touchscreen) + return; + + mxs_lradc_disable_ts(lradc); + input_unregister_device(lradc->ts_input); +} + +/* + * IRQ Handling + */ +static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) +{ + struct iio_dev *iio = data; + struct mxs_lradc *lradc = iio_priv(iio); + unsigned long reg = readl(lradc->base + LRADC_CTRL1); + u32 clr_irq = mxs_lradc_irq_mask(lradc); + const u32 ts_irq_mask = + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2); + + if (!(reg & mxs_lradc_irq_mask(lradc))) + return IRQ_NONE; + + if (lradc->use_touchscreen && (reg & ts_irq_mask)) { + mxs_lradc_handle_touch(lradc); + + /* Make sure we don't clear the next conversion's interrupt. */ + clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); + } + + if (iio_buffer_enabled(iio)) { + if (reg & lradc->buffer_vchans) + iio_trigger_poll(iio->trig); + } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { + complete(&lradc->completion); + } + + mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1); + + return IRQ_HANDLED; +} + +/* + * Trigger handling + */ +static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *iio = pf->indio_dev; + struct mxs_lradc *lradc = iio_priv(iio); + const u32 chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + unsigned int i, j = 0; + + for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { + lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); + mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j)); + lradc->buffer[j] &= LRADC_CH_VALUE_MASK; + lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; + j++; + } + + iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp); + + iio_trigger_notify_done(iio->trig); + + return IRQ_HANDLED; +} + +static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state) +{ + struct iio_dev *iio = iio_trigger_get_drvdata(trig); + struct mxs_lradc *lradc = iio_priv(iio); + const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; + + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st); + + return 0; +} + +static const struct iio_trigger_ops mxs_lradc_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = &mxs_lradc_configure_trigger, +}; + +static int mxs_lradc_trigger_init(struct iio_dev *iio) +{ + int ret; + struct iio_trigger *trig; + struct mxs_lradc *lradc = iio_priv(iio); + + trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id); + if (!trig) + return -ENOMEM; + + trig->dev.parent = lradc->dev; + iio_trigger_set_drvdata(trig, iio); + trig->ops = &mxs_lradc_trigger_ops; + + ret = iio_trigger_register(trig); + if (ret) { + iio_trigger_free(trig); + return ret; + } + + lradc->trig = trig; + + return 0; +} + +static void mxs_lradc_trigger_remove(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + + iio_trigger_unregister(lradc->trig); + iio_trigger_free(lradc->trig); +} + +static int mxs_lradc_buffer_preenable(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + int ret = 0, chan, ofs = 0; + unsigned long enable = 0; + u32 ctrl4_set = 0; + u32 ctrl4_clr = 0; + u32 ctrl1_irq = 0; + const u32 chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + const int len = bitmap_weight(iio->active_scan_mask, + LRADC_MAX_TOTAL_CHANS); + + if (!len) + return -EINVAL; + + /* + * Lock the driver so raw access can not be done during buffered + * operation. This simplifies the code a lot. + */ + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL); + if (!lradc->buffer) { + ret = -ENOMEM; + goto err_mem; + } + + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear( + lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); + + for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { + ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); + ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); + ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); + mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs)); + bitmap_set(&enable, ofs, 1); + ofs++; + } + + mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | + LRADC_DELAY_KICK, LRADC_DELAY(0)); + mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4); + mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4); + mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1); + mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, + LRADC_DELAY(0)); + + return 0; + +err_mem: + mutex_unlock(&lradc->lock); + return ret; +} + +static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + + mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | + LRADC_DELAY_KICK, LRADC_DELAY(0)); + + mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear( + lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + + kfree(lradc->buffer); + mutex_unlock(&lradc->lock); + + return 0; +} + +static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio, + const unsigned long *mask) +{ + struct mxs_lradc *lradc = iio_priv(iio); + const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS); + int rsvd_chans = 0; + unsigned long rsvd_mask = 0; + + if (lradc->use_touchbutton) + rsvd_mask |= CHAN_MASK_TOUCHBUTTON; + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE) + rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE; + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) + rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE; + + if (lradc->use_touchbutton) + rsvd_chans++; + if (lradc->use_touchscreen) + rsvd_chans += 2; + + /* Test for attempts to map channels with special mode of operation. */ + if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) + return false; + + /* Test for attempts to map more channels then available slots. */ + if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS) + return false; + + return true; +} + +static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = { + .preenable = &mxs_lradc_buffer_preenable, + .postenable = &iio_triggered_buffer_postenable, + .predisable = &iio_triggered_buffer_predisable, + .postdisable = &mxs_lradc_buffer_postdisable, + .validate_scan_mask = &mxs_lradc_validate_scan_mask, +}; + +/* + * Driver initialization + */ + +#define MXS_ADC_CHAN(idx, chan_type, name) { \ + .type = (chan_type), \ + .indexed = 1, \ + .scan_index = (idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .channel = (idx), \ + .address = (idx), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = LRADC_RESOLUTION, \ + .storagebits = 32, \ + }, \ + .datasheet_name = (name), \ +} + +static const struct iio_chan_spec mx23_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), + MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), + MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), + MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), + MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), + MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), + MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"), + MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), + /* Combined Temperature sensors */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = 8, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = 8, + .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, + .datasheet_name = "TEMP_DIE", + }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, + MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL), + MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL), + MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"), + MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"), + MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), + MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), +}; + +static const struct iio_chan_spec mx28_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), + MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), + MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), + MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), + MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), + MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), + MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"), + MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), + /* Combined Temperature sensors */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = 8, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = 8, + .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, + .datasheet_name = "TEMP_DIE", + }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, + MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"), + MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"), + MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"), + MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"), + MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), + MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), +}; + +static int mxs_lradc_hw_init(struct mxs_lradc *lradc) +{ + /* The ADC always uses DELAY CHANNEL 0. */ + const u32 adc_cfg = + (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | + (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); + + int ret = stmp_reset_block(lradc->base); + + if (ret) + return ret; + + /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ + mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0)); + + /* Disable remaining DELAY CHANNELs */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); + + /* Configure the touchscreen type */ + if (lradc->soc == IMX28_LRADC) { + mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) + mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + } + + /* Start internal temperature sensing. */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2); + + return 0; +} + +static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) +{ + int i; + + mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1); + + for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i)); +} + +static const struct of_device_id mxs_lradc_dt_ids[] = { + { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, }, + { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); + +static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc, + struct device_node *lradc_node) +{ + int ret; + u32 ts_wires = 0, adapt; + + ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires", + &ts_wires); + if (ret) + return -ENODEV; /* touchscreen feature disabled */ + + switch (ts_wires) { + case 4: + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE; + break; + case 5: + if (lradc->soc == IMX28_LRADC) { + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE; + break; + } + /* fall through an error message for i.MX23 */ + default: + dev_err(lradc->dev, + "Unsupported number of touchscreen wires (%d)\n", + ts_wires); + return -EINVAL; + } + + if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) { + lradc->over_sample_cnt = 4; + } else { + if (adapt < 1 || adapt > 32) { + dev_err(lradc->dev, "Invalid sample count (%u)\n", + adapt); + return -EINVAL; + } + lradc->over_sample_cnt = adapt; + } + + if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) { + lradc->over_sample_delay = 2; + } else { + if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) { + dev_err(lradc->dev, "Invalid sample delay (%u)\n", + adapt); + return -EINVAL; + } + lradc->over_sample_delay = adapt; + } + + if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) { + lradc->settling_delay = 10; + } else { + if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) { + dev_err(lradc->dev, "Invalid settling delay (%u)\n", + adapt); + return -EINVAL; + } + lradc->settling_delay = adapt; + } + + return 0; +} + +static int mxs_lradc_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(mxs_lradc_dt_ids, &pdev->dev); + const struct mxs_lradc_of_config *of_cfg = + &mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data]; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct mxs_lradc *lradc; + struct iio_dev *iio; + struct resource *iores; + int ret = 0, touch_ret; + int i, s; + u64 scale_uv; + + /* Allocate the IIO device. */ + iio = devm_iio_device_alloc(dev, sizeof(*lradc)); + if (!iio) { + dev_err(dev, "Failed to allocate IIO device\n"); + return -ENOMEM; + } + + lradc = iio_priv(iio); + lradc->soc = (enum mxs_lradc_id)of_id->data; + + /* Grab the memory area */ + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + lradc->dev = &pdev->dev; + lradc->base = devm_ioremap_resource(dev, iores); + if (IS_ERR(lradc->base)) + return PTR_ERR(lradc->base); + + lradc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(lradc->clk)) { + dev_err(dev, "Failed to get the delay unit clock\n"); + return PTR_ERR(lradc->clk); + } + ret = clk_prepare_enable(lradc->clk); + if (ret != 0) { + dev_err(dev, "Failed to enable the delay unit clock\n"); + return ret; + } + + touch_ret = mxs_lradc_probe_touchscreen(lradc, node); + + if (touch_ret == 0) + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; + else + lradc->buffer_vchans = BUFFER_VCHANS_ALL; + + /* Grab all IRQ sources */ + for (i = 0; i < of_cfg->irq_count; i++) { + lradc->irq[i] = platform_get_irq(pdev, i); + if (lradc->irq[i] < 0) { + ret = lradc->irq[i]; + goto err_clk; + } + + ret = devm_request_irq(dev, lradc->irq[i], + mxs_lradc_handle_irq, 0, + of_cfg->irq_name[i], iio); + if (ret) + goto err_clk; + } + + lradc->vref_mv = of_cfg->vref_mv; + + platform_set_drvdata(pdev, iio); + + init_completion(&lradc->completion); + mutex_init(&lradc->lock); + + iio->name = pdev->name; + iio->dev.parent = &pdev->dev; + iio->info = &mxs_lradc_iio_info; + iio->modes = INDIO_DIRECT_MODE; + iio->masklength = LRADC_MAX_TOTAL_CHANS; + + if (lradc->soc == IMX23_LRADC) { + iio->channels = mx23_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec); + } else { + iio->channels = mx28_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec); + } + + ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, + &mxs_lradc_trigger_handler, + &mxs_lradc_buffer_ops); + if (ret) + goto err_clk; + + ret = mxs_lradc_trigger_init(iio); + if (ret) + goto err_trig; + + /* Populate available ADC input ranges */ + for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) { + for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) { + /* + * [s=0] = optional divider by two disabled (default) + * [s=1] = optional divider by two enabled + * + * The scale is calculated by doing: + * Vref >> (realbits - s) + * which multiplies by two on the second component + * of the array. + */ + scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >> + (LRADC_RESOLUTION - s); + lradc->scale_avail[i][s].nano = + do_div(scale_uv, 100000000) * 10; + lradc->scale_avail[i][s].integer = scale_uv; + } + } + + /* Configure the hardware. */ + ret = mxs_lradc_hw_init(lradc); + if (ret) + goto err_dev; + + /* Register the touchscreen input device. */ + if (touch_ret == 0) { + ret = mxs_lradc_ts_register(lradc); + if (ret) + goto err_ts_register; + } + + /* Register IIO device. */ + ret = iio_device_register(iio); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_ts; + } + + return 0; + +err_ts: + mxs_lradc_ts_unregister(lradc); +err_ts_register: + mxs_lradc_hw_stop(lradc); +err_dev: + mxs_lradc_trigger_remove(iio); +err_trig: + iio_triggered_buffer_cleanup(iio); +err_clk: + clk_disable_unprepare(lradc->clk); + return ret; +} + +static int mxs_lradc_remove(struct platform_device *pdev) +{ + struct iio_dev *iio = platform_get_drvdata(pdev); + struct mxs_lradc *lradc = iio_priv(iio); + + iio_device_unregister(iio); + mxs_lradc_ts_unregister(lradc); + mxs_lradc_hw_stop(lradc); + mxs_lradc_trigger_remove(iio); + iio_triggered_buffer_cleanup(iio); + + clk_disable_unprepare(lradc->clk); + + return 0; +} + +static struct platform_driver mxs_lradc_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = mxs_lradc_dt_ids, + }, + .probe = mxs_lradc_probe, + .remove = mxs_lradc_remove, +}; + +module_platform_driver(mxs_lradc_driver); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("Freescale MXS LRADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git b/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c new file mode 100644 index 0000000..2bbf0c5 --- /dev/null +++ b/drivers/iio/adc/palmas_gpadc.c @@ -0,0 +1,859 @@ +/* + * palmas-adc.c -- TI PALMAS GPADC. + * + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * Author: Pradeep Goudagunta + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MOD_NAME "palmas-gpadc" +#define PALMAS_ADC_CONVERSION_TIMEOUT (msecs_to_jiffies(5000)) +#define PALMAS_TO_BE_CALCULATED 0 +#define PALMAS_GPADC_TRIMINVALID -1 + +struct palmas_gpadc_info { +/* calibration codes and regs */ + int x1; /* lower ideal code */ + int x2; /* higher ideal code */ + int v1; /* expected lower volt reading */ + int v2; /* expected higher volt reading */ + u8 trim1_reg; /* register number for lower trim */ + u8 trim2_reg; /* register number for upper trim */ + int gain; /* calculated from above (after reading trim regs) */ + int offset; /* calculated from above (after reading trim regs) */ + int gain_error; /* calculated from above (after reading trim regs) */ + bool is_uncalibrated; /* if channel has calibration data */ +}; + +#define PALMAS_ADC_INFO(_chan, _x1, _x2, _v1, _v2, _t1, _t2, _is_uncalibrated) \ + [PALMAS_ADC_CH_##_chan] = { \ + .x1 = _x1, \ + .x2 = _x2, \ + .v1 = _v1, \ + .v2 = _v2, \ + .gain = PALMAS_TO_BE_CALCULATED, \ + .offset = PALMAS_TO_BE_CALCULATED, \ + .gain_error = PALMAS_TO_BE_CALCULATED, \ + .trim1_reg = PALMAS_GPADC_TRIM##_t1, \ + .trim2_reg = PALMAS_GPADC_TRIM##_t2, \ + .is_uncalibrated = _is_uncalibrated \ + } + +static struct palmas_gpadc_info palmas_gpadc_info[] = { + PALMAS_ADC_INFO(IN0, 2064, 3112, 630, 950, 1, 2, false), + PALMAS_ADC_INFO(IN1, 2064, 3112, 630, 950, 1, 2, false), + PALMAS_ADC_INFO(IN2, 2064, 3112, 1260, 1900, 3, 4, false), + PALMAS_ADC_INFO(IN3, 2064, 3112, 630, 950, 1, 2, false), + PALMAS_ADC_INFO(IN4, 2064, 3112, 630, 950, 1, 2, false), + PALMAS_ADC_INFO(IN5, 2064, 3112, 630, 950, 1, 2, false), + PALMAS_ADC_INFO(IN6, 2064, 3112, 2520, 3800, 5, 6, false), + PALMAS_ADC_INFO(IN7, 2064, 3112, 2520, 3800, 7, 8, false), + PALMAS_ADC_INFO(IN8, 2064, 3112, 3150, 4750, 9, 10, false), + PALMAS_ADC_INFO(IN9, 2064, 3112, 5670, 8550, 11, 12, false), + PALMAS_ADC_INFO(IN10, 2064, 3112, 3465, 5225, 13, 14, false), + PALMAS_ADC_INFO(IN11, 0, 0, 0, 0, INVALID, INVALID, true), + PALMAS_ADC_INFO(IN12, 0, 0, 0, 0, INVALID, INVALID, true), + PALMAS_ADC_INFO(IN13, 0, 0, 0, 0, INVALID, INVALID, true), + PALMAS_ADC_INFO(IN14, 2064, 3112, 3645, 5225, 15, 16, false), + PALMAS_ADC_INFO(IN15, 0, 0, 0, 0, INVALID, INVALID, true), +}; + +/** + * struct palmas_gpadc - the palmas_gpadc structure + * @ch0_current: channel 0 current source setting + * 0: 0 uA + * 1: 5 uA + * 2: 15 uA + * 3: 20 uA + * @ch3_current: channel 0 current source setting + * 0: 0 uA + * 1: 10 uA + * 2: 400 uA + * 3: 800 uA + * @extended_delay: enable the gpadc extended delay mode + * @auto_conversion_period: define the auto_conversion_period + * + * This is the palmas_gpadc structure to store run-time information + * and pointers for this driver instance. + */ + +struct palmas_gpadc { + struct device *dev; + struct palmas *palmas; + u8 ch0_current; + u8 ch3_current; + bool extended_delay; + int irq; + int irq_auto_0; + int irq_auto_1; + struct palmas_gpadc_info *adc_info; + struct completion conv_completion; + struct palmas_adc_wakeup_property wakeup1_data; + struct palmas_adc_wakeup_property wakeup2_data; + bool wakeup1_enable; + bool wakeup2_enable; + int auto_conversion_period; +}; + +/* + * GPADC lock issue in AUTO mode. + * Impact: In AUTO mode, GPADC conversion can be locked after disabling AUTO + * mode feature. + * Details: + * When the AUTO mode is the only conversion mode enabled, if the AUTO + * mode feature is disabled with bit GPADC_AUTO_CTRL. AUTO_CONV1_EN = 0 + * or bit GPADC_AUTO_CTRL. AUTO_CONV0_EN = 0 during a conversion, the + * conversion mechanism can be seen as locked meaning that all following + * conversion will give 0 as a result. Bit GPADC_STATUS.GPADC_AVAILABLE + * will stay at 0 meaning that GPADC is busy. An RT conversion can unlock + * the GPADC. + * + * Workaround(s): + * To avoid the lock mechanism, the workaround to follow before any stop + * conversion request is: + * Force the GPADC state machine to be ON by using the GPADC_CTRL1. + * GPADC_FORCE bit = 1 + * Shutdown the GPADC AUTO conversion using + * GPADC_AUTO_CTRL.SHUTDOWN_CONV[01] = 0. + * After 100us, force the GPADC state machine to be OFF by using the + * GPADC_CTRL1. GPADC_FORCE bit = 0 + */ + +static int palmas_disable_auto_conversion(struct palmas_gpadc *adc) +{ + int ret; + + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_CTRL1, + PALMAS_GPADC_CTRL1_GPADC_FORCE, + PALMAS_GPADC_CTRL1_GPADC_FORCE); + if (ret < 0) { + dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret); + return ret; + } + + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_AUTO_CTRL, + PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1 | + PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0, + 0); + if (ret < 0) { + dev_err(adc->dev, "AUTO_CTRL update failed: %d\n", ret); + return ret; + } + + udelay(100); + + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_CTRL1, + PALMAS_GPADC_CTRL1_GPADC_FORCE, 0); + if (ret < 0) + dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret); + + return ret; +} + +static irqreturn_t palmas_gpadc_irq(int irq, void *data) +{ + struct palmas_gpadc *adc = data; + + complete(&adc->conv_completion); + + return IRQ_HANDLED; +} + +static irqreturn_t palmas_gpadc_irq_auto(int irq, void *data) +{ + struct palmas_gpadc *adc = data; + + dev_dbg(adc->dev, "Threshold interrupt %d occurs\n", irq); + palmas_disable_auto_conversion(adc); + + return IRQ_HANDLED; +} + +static int palmas_gpadc_start_mask_interrupt(struct palmas_gpadc *adc, + bool mask) +{ + int ret; + + if (!mask) + ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE, + PALMAS_INT3_MASK, + PALMAS_INT3_MASK_GPADC_EOC_SW, 0); + else + ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE, + PALMAS_INT3_MASK, + PALMAS_INT3_MASK_GPADC_EOC_SW, + PALMAS_INT3_MASK_GPADC_EOC_SW); + if (ret < 0) + dev_err(adc->dev, "GPADC INT MASK update failed: %d\n", ret); + + return ret; +} + +static int palmas_gpadc_enable(struct palmas_gpadc *adc, int adc_chan, + int enable) +{ + unsigned int mask, val; + int ret; + + if (enable) { + val = (adc->extended_delay + << PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT); + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_RT_CTRL, + PALMAS_GPADC_RT_CTRL_EXTEND_DELAY, val); + if (ret < 0) { + dev_err(adc->dev, "RT_CTRL update failed: %d\n", ret); + return ret; + } + + mask = (PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK | + PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK | + PALMAS_GPADC_CTRL1_GPADC_FORCE); + val = (adc->ch0_current + << PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT); + val |= (adc->ch3_current + << PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT); + val |= PALMAS_GPADC_CTRL1_GPADC_FORCE; + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_CTRL1, mask, val); + if (ret < 0) { + dev_err(adc->dev, + "Failed to update current setting: %d\n", ret); + return ret; + } + + mask = (PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK | + PALMAS_GPADC_SW_SELECT_SW_CONV_EN); + val = (adc_chan | PALMAS_GPADC_SW_SELECT_SW_CONV_EN); + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_SW_SELECT, mask, val); + if (ret < 0) { + dev_err(adc->dev, "SW_SELECT update failed: %d\n", ret); + return ret; + } + } else { + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_SW_SELECT, 0); + if (ret < 0) + dev_err(adc->dev, "SW_SELECT write failed: %d\n", ret); + + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_CTRL1, + PALMAS_GPADC_CTRL1_GPADC_FORCE, 0); + if (ret < 0) { + dev_err(adc->dev, "CTRL1 update failed: %d\n", ret); + return ret; + } + } + + return ret; +} + +static int palmas_gpadc_read_prepare(struct palmas_gpadc *adc, int adc_chan) +{ + int ret; + + ret = palmas_gpadc_enable(adc, adc_chan, true); + if (ret < 0) + return ret; + + return palmas_gpadc_start_mask_interrupt(adc, 0); +} + +static void palmas_gpadc_read_done(struct palmas_gpadc *adc, int adc_chan) +{ + palmas_gpadc_start_mask_interrupt(adc, 1); + palmas_gpadc_enable(adc, adc_chan, false); +} + +static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan) +{ + int k; + int d1; + int d2; + int ret; + int gain; + int x1 = adc->adc_info[adc_chan].x1; + int x2 = adc->adc_info[adc_chan].x2; + int v1 = adc->adc_info[adc_chan].v1; + int v2 = adc->adc_info[adc_chan].v2; + + ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE, + adc->adc_info[adc_chan].trim1_reg, &d1); + if (ret < 0) { + dev_err(adc->dev, "TRIM read failed: %d\n", ret); + goto scrub; + } + + ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE, + adc->adc_info[adc_chan].trim2_reg, &d2); + if (ret < 0) { + dev_err(adc->dev, "TRIM read failed: %d\n", ret); + goto scrub; + } + + /* gain error calculation */ + k = (1000 + (1000 * (d2 - d1)) / (x2 - x1)); + + /* gain calculation */ + gain = ((v2 - v1) * 1000) / (x2 - x1); + + adc->adc_info[adc_chan].gain_error = k; + adc->adc_info[adc_chan].gain = gain; + /* offset Calculation */ + adc->adc_info[adc_chan].offset = (d1 * 1000) - ((k - 1000) * x1); + +scrub: + return ret; +} + +static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan) +{ + unsigned int val; + int ret; + + init_completion(&adc->conv_completion); + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_SW_SELECT, + PALMAS_GPADC_SW_SELECT_SW_START_CONV0, + PALMAS_GPADC_SW_SELECT_SW_START_CONV0); + if (ret < 0) { + dev_err(adc->dev, "SELECT_SW_START write failed: %d\n", ret); + return ret; + } + + ret = wait_for_completion_timeout(&adc->conv_completion, + PALMAS_ADC_CONVERSION_TIMEOUT); + if (ret == 0) { + dev_err(adc->dev, "conversion not completed\n"); + return -ETIMEDOUT; + } + + ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_SW_CONV0_LSB, &val, 2); + if (ret < 0) { + dev_err(adc->dev, "SW_CONV0_LSB read failed: %d\n", ret); + return ret; + } + + ret = val & 0xFFF; + + return ret; +} + +static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc, + int adc_chan, int val) +{ + if (!adc->adc_info[adc_chan].is_uncalibrated) + val = (val*1000 - adc->adc_info[adc_chan].offset) / + adc->adc_info[adc_chan].gain_error; + + if (val < 0) { + dev_err(adc->dev, "Mismatch with calibration\n"); + return 0; + } + + val = (val * adc->adc_info[adc_chan].gain) / 1000; + + return val; +} + +static int palmas_gpadc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct palmas_gpadc *adc = iio_priv(indio_dev); + int adc_chan = chan->channel; + int ret = 0; + + if (adc_chan > PALMAS_ADC_CH_MAX) + return -EINVAL; + + mutex_lock(&indio_dev->mlock); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + ret = palmas_gpadc_read_prepare(adc, adc_chan); + if (ret < 0) + goto out; + + ret = palmas_gpadc_start_conversion(adc, adc_chan); + if (ret < 0) { + dev_err(adc->dev, + "ADC start conversion failed\n"); + goto out; + } + + if (mask == IIO_CHAN_INFO_PROCESSED) + ret = palmas_gpadc_get_calibrated_code( + adc, adc_chan, ret); + + *val = ret; + + ret = IIO_VAL_INT; + goto out; + } + + mutex_unlock(&indio_dev->mlock); + return ret; + +out: + palmas_gpadc_read_done(adc, adc_chan); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static const struct iio_info palmas_gpadc_iio_info = { + .read_raw = palmas_gpadc_read_raw, + .driver_module = THIS_MODULE, +}; + +#define PALMAS_ADC_CHAN_IIO(chan, _type, chan_info) \ +{ \ + .datasheet_name = PALMAS_DATASHEET_NAME(chan), \ + .type = _type, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(chan_info), \ + .indexed = 1, \ + .channel = PALMAS_ADC_CH_##chan, \ +} + +static const struct iio_chan_spec palmas_gpadc_iio_channel[] = { + PALMAS_ADC_CHAN_IIO(IN0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN1, IIO_TEMP, IIO_CHAN_INFO_RAW), + PALMAS_ADC_CHAN_IIO(IN2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN3, IIO_TEMP, IIO_CHAN_INFO_RAW), + PALMAS_ADC_CHAN_IIO(IN4, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN11, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN12, IIO_TEMP, IIO_CHAN_INFO_RAW), + PALMAS_ADC_CHAN_IIO(IN13, IIO_TEMP, IIO_CHAN_INFO_RAW), + PALMAS_ADC_CHAN_IIO(IN14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + PALMAS_ADC_CHAN_IIO(IN15, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), +}; + +static int palmas_gpadc_get_adc_dt_data(struct platform_device *pdev, + struct palmas_gpadc_platform_data **gpadc_pdata) +{ + struct device_node *np = pdev->dev.of_node; + struct palmas_gpadc_platform_data *gp_data; + int ret; + u32 pval; + + gp_data = devm_kzalloc(&pdev->dev, sizeof(*gp_data), GFP_KERNEL); + if (!gp_data) + return -ENOMEM; + + ret = of_property_read_u32(np, "ti,channel0-current-microamp", &pval); + if (!ret) + gp_data->ch0_current = pval; + + ret = of_property_read_u32(np, "ti,channel3-current-microamp", &pval); + if (!ret) + gp_data->ch3_current = pval; + + gp_data->extended_delay = of_property_read_bool(np, + "ti,enable-extended-delay"); + + *gpadc_pdata = gp_data; + + return 0; +} + +static int palmas_gpadc_probe(struct platform_device *pdev) +{ + struct palmas_gpadc *adc; + struct palmas_platform_data *pdata; + struct palmas_gpadc_platform_data *gpadc_pdata = NULL; + struct iio_dev *indio_dev; + int ret, i; + + pdata = dev_get_platdata(pdev->dev.parent); + + if (pdata && pdata->gpadc_pdata) + gpadc_pdata = pdata->gpadc_pdata; + + if (!gpadc_pdata && pdev->dev.of_node) { + ret = palmas_gpadc_get_adc_dt_data(pdev, &gpadc_pdata); + if (ret < 0) + return ret; + } + if (!gpadc_pdata) + return -EINVAL; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "iio_device_alloc failed\n"); + return -ENOMEM; + } + + adc = iio_priv(indio_dev); + adc->dev = &pdev->dev; + adc->palmas = dev_get_drvdata(pdev->dev.parent); + adc->adc_info = palmas_gpadc_info; + init_completion(&adc->conv_completion); + dev_set_drvdata(&pdev->dev, indio_dev); + + adc->auto_conversion_period = gpadc_pdata->auto_conversion_period_ms; + adc->irq = palmas_irq_get_virq(adc->palmas, PALMAS_GPADC_EOC_SW_IRQ); + if (adc->irq < 0) { + dev_err(adc->dev, + "get virq failed: %d\n", adc->irq); + ret = adc->irq; + goto out; + } + ret = request_threaded_irq(adc->irq, NULL, + palmas_gpadc_irq, + IRQF_ONESHOT, dev_name(adc->dev), + adc); + if (ret < 0) { + dev_err(adc->dev, + "request irq %d failed: %d\n", adc->irq, ret); + goto out; + } + + if (gpadc_pdata->adc_wakeup1_data) { + memcpy(&adc->wakeup1_data, gpadc_pdata->adc_wakeup1_data, + sizeof(adc->wakeup1_data)); + adc->wakeup1_enable = true; + adc->irq_auto_0 = platform_get_irq(pdev, 1); + ret = request_threaded_irq(adc->irq_auto_0, NULL, + palmas_gpadc_irq_auto, + IRQF_ONESHOT, + "palmas-adc-auto-0", adc); + if (ret < 0) { + dev_err(adc->dev, "request auto0 irq %d failed: %d\n", + adc->irq_auto_0, ret); + goto out_irq_free; + } + } + + if (gpadc_pdata->adc_wakeup2_data) { + memcpy(&adc->wakeup2_data, gpadc_pdata->adc_wakeup2_data, + sizeof(adc->wakeup2_data)); + adc->wakeup2_enable = true; + adc->irq_auto_1 = platform_get_irq(pdev, 2); + ret = request_threaded_irq(adc->irq_auto_1, NULL, + palmas_gpadc_irq_auto, + IRQF_ONESHOT, + "palmas-adc-auto-1", adc); + if (ret < 0) { + dev_err(adc->dev, "request auto1 irq %d failed: %d\n", + adc->irq_auto_1, ret); + goto out_irq_auto0_free; + } + } + + /* set the current source 0 (value 0/5/15/20 uA => 0..3) */ + if (gpadc_pdata->ch0_current <= 1) + adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_0; + else if (gpadc_pdata->ch0_current <= 5) + adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_5; + else if (gpadc_pdata->ch0_current <= 15) + adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_15; + else + adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_20; + + /* set the current source 3 (value 0/10/400/800 uA => 0..3) */ + if (gpadc_pdata->ch3_current <= 1) + adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_0; + else if (gpadc_pdata->ch3_current <= 10) + adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_10; + else if (gpadc_pdata->ch3_current <= 400) + adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_400; + else + adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_800; + + adc->extended_delay = gpadc_pdata->extended_delay; + + indio_dev->name = MOD_NAME; + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &palmas_gpadc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = palmas_gpadc_iio_channel; + indio_dev->num_channels = ARRAY_SIZE(palmas_gpadc_iio_channel); + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(adc->dev, "iio_device_register() failed: %d\n", ret); + goto out_irq_auto1_free; + } + + device_set_wakeup_capable(&pdev->dev, 1); + for (i = 0; i < PALMAS_ADC_CH_MAX; i++) { + if (!(adc->adc_info[i].is_uncalibrated)) + palmas_gpadc_calibrate(adc, i); + } + + if (adc->wakeup1_enable || adc->wakeup2_enable) + device_wakeup_enable(&pdev->dev); + + return 0; + +out_irq_auto1_free: + if (gpadc_pdata->adc_wakeup2_data) + free_irq(adc->irq_auto_1, adc); +out_irq_auto0_free: + if (gpadc_pdata->adc_wakeup1_data) + free_irq(adc->irq_auto_0, adc); +out_irq_free: + free_irq(adc->irq, adc); +out: + return ret; +} + +static int palmas_gpadc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(&pdev->dev); + struct palmas_gpadc *adc = iio_priv(indio_dev); + + if (adc->wakeup1_enable || adc->wakeup2_enable) + device_wakeup_disable(&pdev->dev); + iio_device_unregister(indio_dev); + free_irq(adc->irq, adc); + if (adc->wakeup1_enable) + free_irq(adc->irq_auto_0, adc); + if (adc->wakeup2_enable) + free_irq(adc->irq_auto_1, adc); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc) +{ + int adc_period, conv; + int i; + int ch0 = 0, ch1 = 0; + int thres; + int ret; + + adc_period = adc->auto_conversion_period; + for (i = 0; i < 16; ++i) { + if (((1000 * (1 << i)) / 32) < adc_period) + continue; + } + if (i > 0) + i--; + adc_period = i; + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_AUTO_CTRL, + PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK, + adc_period); + if (ret < 0) { + dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret); + return ret; + } + + conv = 0; + if (adc->wakeup1_enable) { + int polarity; + + ch0 = adc->wakeup1_data.adc_channel_number; + conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN; + if (adc->wakeup1_data.adc_high_threshold > 0) { + thres = adc->wakeup1_data.adc_high_threshold; + polarity = 0; + } else { + thres = adc->wakeup1_data.adc_low_threshold; + polarity = PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL; + } + + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_THRES_CONV0_LSB, thres & 0xFF); + if (ret < 0) { + dev_err(adc->dev, + "THRES_CONV0_LSB write failed: %d\n", ret); + return ret; + } + + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_THRES_CONV0_MSB, + ((thres >> 8) & 0xF) | polarity); + if (ret < 0) { + dev_err(adc->dev, + "THRES_CONV0_MSB write failed: %d\n", ret); + return ret; + } + } + + if (adc->wakeup2_enable) { + int polarity; + + ch1 = adc->wakeup2_data.adc_channel_number; + conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN; + if (adc->wakeup2_data.adc_high_threshold > 0) { + thres = adc->wakeup2_data.adc_high_threshold; + polarity = 0; + } else { + thres = adc->wakeup2_data.adc_low_threshold; + polarity = PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL; + } + + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_THRES_CONV1_LSB, thres & 0xFF); + if (ret < 0) { + dev_err(adc->dev, + "THRES_CONV1_LSB write failed: %d\n", ret); + return ret; + } + + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_THRES_CONV1_MSB, + ((thres >> 8) & 0xF) | polarity); + if (ret < 0) { + dev_err(adc->dev, + "THRES_CONV1_MSB write failed: %d\n", ret); + return ret; + } + } + + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_AUTO_SELECT, (ch1 << 4) | ch0); + if (ret < 0) { + dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret); + return ret; + } + + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_AUTO_CTRL, + PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN | + PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN, conv); + if (ret < 0) + dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret); + + return ret; +} + +static int palmas_adc_wakeup_reset(struct palmas_gpadc *adc) +{ + int ret; + + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE, + PALMAS_GPADC_AUTO_SELECT, 0); + if (ret < 0) { + dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret); + return ret; + } + + ret = palmas_disable_auto_conversion(adc); + if (ret < 0) + dev_err(adc->dev, "Disable auto conversion failed: %d\n", ret); + + return ret; +} + +static int palmas_gpadc_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct palmas_gpadc *adc = iio_priv(indio_dev); + int wakeup = adc->wakeup1_enable || adc->wakeup2_enable; + int ret; + + if (!device_may_wakeup(dev) || !wakeup) + return 0; + + ret = palmas_adc_wakeup_configure(adc); + if (ret < 0) + return ret; + + if (adc->wakeup1_enable) + enable_irq_wake(adc->irq_auto_0); + + if (adc->wakeup2_enable) + enable_irq_wake(adc->irq_auto_1); + + return 0; +} + +static int palmas_gpadc_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct palmas_gpadc *adc = iio_priv(indio_dev); + int wakeup = adc->wakeup1_enable || adc->wakeup2_enable; + int ret; + + if (!device_may_wakeup(dev) || !wakeup) + return 0; + + ret = palmas_adc_wakeup_reset(adc); + if (ret < 0) + return ret; + + if (adc->wakeup1_enable) + disable_irq_wake(adc->irq_auto_0); + + if (adc->wakeup2_enable) + disable_irq_wake(adc->irq_auto_1); + + return 0; +}; +#endif + +static const struct dev_pm_ops palmas_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(palmas_gpadc_suspend, + palmas_gpadc_resume) +}; + +static const struct of_device_id of_palmas_gpadc_match_tbl[] = { + { .compatible = "ti,palmas-gpadc", }, + { /* end */ } +}; +MODULE_DEVICE_TABLE(of, of_palmas_gpadc_match_tbl); + +static struct platform_driver palmas_gpadc_driver = { + .probe = palmas_gpadc_probe, + .remove = palmas_gpadc_remove, + .driver = { + .name = MOD_NAME, + .pm = &palmas_pm_ops, + .of_match_table = of_palmas_gpadc_match_tbl, + }, +}; + +static int __init palmas_gpadc_init(void) +{ + return platform_driver_register(&palmas_gpadc_driver); +} +module_init(palmas_gpadc_init); + +static void __exit palmas_gpadc_exit(void) +{ + platform_driver_unregister(&palmas_gpadc_driver); +} +module_exit(palmas_gpadc_exit); + +MODULE_DESCRIPTION("palmas GPADC driver"); +MODULE_AUTHOR("Pradeep Goudagunta"); +MODULE_ALIAS("platform:palmas-gpadc"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index 2c8374f..ecbc121 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -73,7 +73,7 @@ static int adc081c_probe(struct i2c_client *client, int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; iio = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!iio) diff --git b/drivers/iio/adc/ti-adc0832.c b/drivers/iio/adc/ti-adc0832.c new file mode 100644 index 0000000..0afeac0 --- /dev/null +++ b/drivers/iio/adc/ti-adc0832.c @@ -0,0 +1,288 @@ +/* + * ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver + * + * Copyright (c) 2016 Akinobu Mita + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Datasheet: http://www.ti.com/lit/ds/symlink/adc0832-n.pdf + */ + +#include +#include +#include +#include + +enum { + adc0831, + adc0832, + adc0834, + adc0838, +}; + +struct adc0832 { + struct spi_device *spi; + struct regulator *reg; + struct mutex lock; + u8 mux_bits; + + u8 tx_buf[2] ____cacheline_aligned; + u8 rx_buf[2]; +}; + +#define ADC0832_VOLTAGE_CHANNEL(chan) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + } + +#define ADC0832_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (chan1), \ + .channel2 = (chan2), \ + .differential = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + } + +static const struct iio_chan_spec adc0831_channels[] = { + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), +}; + +static const struct iio_chan_spec adc0832_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), +}; + +static const struct iio_chan_spec adc0834_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL(2), + ADC0832_VOLTAGE_CHANNEL(3), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), + ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3), + ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2), +}; + +static const struct iio_chan_spec adc0838_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL(2), + ADC0832_VOLTAGE_CHANNEL(3), + ADC0832_VOLTAGE_CHANNEL(4), + ADC0832_VOLTAGE_CHANNEL(5), + ADC0832_VOLTAGE_CHANNEL(6), + ADC0832_VOLTAGE_CHANNEL(7), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), + ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3), + ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2), + ADC0832_VOLTAGE_CHANNEL_DIFF(4, 5), + ADC0832_VOLTAGE_CHANNEL_DIFF(5, 4), + ADC0832_VOLTAGE_CHANNEL_DIFF(6, 7), + ADC0832_VOLTAGE_CHANNEL_DIFF(7, 6), +}; + +static int adc0831_adc_conversion(struct adc0832 *adc) +{ + struct spi_device *spi = adc->spi; + int ret; + + ret = spi_read(spi, &adc->rx_buf, 2); + if (ret) + return ret; + + /* + * Skip TRI-STATE and a leading zero + */ + return (adc->rx_buf[0] << 2 & 0xff) | (adc->rx_buf[1] >> 6); +} + +static int adc0832_adc_conversion(struct adc0832 *adc, int channel, + bool differential) +{ + struct spi_device *spi = adc->spi; + struct spi_transfer xfer = { + .tx_buf = adc->tx_buf, + .rx_buf = adc->rx_buf, + .len = 2, + }; + int ret; + + if (!adc->mux_bits) + return adc0831_adc_conversion(adc); + + /* start bit */ + adc->tx_buf[0] = 1 << (adc->mux_bits + 1); + /* single-ended or differential */ + adc->tx_buf[0] |= differential ? 0 : (1 << adc->mux_bits); + /* odd / sign */ + adc->tx_buf[0] |= (channel % 2) << (adc->mux_bits - 1); + /* select */ + if (adc->mux_bits > 1) + adc->tx_buf[0] |= channel / 2; + + /* align Data output BIT7 (MSB) to 8-bit boundary */ + adc->tx_buf[0] <<= 1; + + ret = spi_sync_transfer(spi, &xfer, 1); + if (ret) + return ret; + + return adc->rx_buf[1]; +} + +static int adc0832_read_raw(struct iio_dev *iio, + struct iio_chan_spec const *channel, int *value, + int *shift, long mask) +{ + struct adc0832 *adc = iio_priv(iio); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&adc->lock); + *value = adc0832_adc_conversion(adc, channel->channel, + channel->differential); + mutex_unlock(&adc->lock); + if (*value < 0) + return *value; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *value = regulator_get_voltage(adc->reg); + if (*value < 0) + return *value; + + /* convert regulator output voltage to mV */ + *value /= 1000; + *shift = 8; + + return IIO_VAL_FRACTIONAL_LOG2; + } + + return -EINVAL; +} + +static const struct iio_info adc0832_info = { + .read_raw = adc0832_read_raw, + .driver_module = THIS_MODULE, +}; + +static int adc0832_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adc0832 *adc; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + + adc = iio_priv(indio_dev); + adc->spi = spi; + mutex_init(&adc->lock); + + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adc0832_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + switch (spi_get_device_id(spi)->driver_data) { + case adc0831: + adc->mux_bits = 0; + indio_dev->channels = adc0831_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0831_channels); + break; + case adc0832: + adc->mux_bits = 1; + indio_dev->channels = adc0832_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0832_channels); + break; + case adc0834: + adc->mux_bits = 2; + indio_dev->channels = adc0834_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0834_channels); + break; + case adc0838: + adc->mux_bits = 3; + indio_dev->channels = adc0838_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0838_channels); + break; + default: + return -EINVAL; + } + + adc->reg = devm_regulator_get(&spi->dev, "vref"); + if (IS_ERR(adc->reg)) + return PTR_ERR(adc->reg); + + ret = regulator_enable(adc->reg); + if (ret) + return ret; + + spi_set_drvdata(spi, indio_dev); + + ret = iio_device_register(indio_dev); + if (ret) + regulator_disable(adc->reg); + + return ret; +} + +static int adc0832_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adc0832 *adc = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + regulator_disable(adc->reg); + + return 0; +} + +#ifdef CONFIG_OF + +static const struct of_device_id adc0832_dt_ids[] = { + { .compatible = "ti,adc0831", }, + { .compatible = "ti,adc0832", }, + { .compatible = "ti,adc0834", }, + { .compatible = "ti,adc0838", }, + {} +}; +MODULE_DEVICE_TABLE(of, adc0832_dt_ids); + +#endif + +static const struct spi_device_id adc0832_id[] = { + { "adc0831", adc0831 }, + { "adc0832", adc0832 }, + { "adc0834", adc0834 }, + { "adc0838", adc0838 }, + {} +}; +MODULE_DEVICE_TABLE(spi, adc0832_id); + +static struct spi_driver adc0832_driver = { + .driver = { + .name = "adc0832", + .of_match_table = of_match_ptr(adc0832_dt_ids), + }, + .probe = adc0832_probe, + .remove = adc0832_remove, + .id_table = adc0832_id, +}; +module_spi_driver(adc0832_driver); + +MODULE_AUTHOR("Akinobu Mita "); +MODULE_DESCRIPTION("ADC0831/ADC0832/ADC0834/ADC0838 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c index ff6f7f6..bc58867 100644 --- a/drivers/iio/adc/ti-adc128s052.c +++ b/drivers/iio/adc/ti-adc128s052.c @@ -1,10 +1,11 @@ /* * Copyright (C) 2014 Angelo Compagnucci * - * Driver for Texas Instruments' ADC128S052 and ADC122S021 ADC chip. + * Driver for Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip. * Datasheets can be found here: * http://www.ti.com/lit/ds/symlink/adc128s052.pdf * http://www.ti.com/lit/ds/symlink/adc122s021.pdf + * http://www.ti.com/lit/ds/symlink/adc124s021.pdf * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -114,9 +115,17 @@ static const struct iio_chan_spec adc122s021_channels[] = { ADC128_VOLTAGE_CHANNEL(1), }; +static const struct iio_chan_spec adc124s021_channels[] = { + ADC128_VOLTAGE_CHANNEL(0), + ADC128_VOLTAGE_CHANNEL(1), + ADC128_VOLTAGE_CHANNEL(2), + ADC128_VOLTAGE_CHANNEL(3), +}; + static const struct adc128_configuration adc128_config[] = { { adc128s052_channels, ARRAY_SIZE(adc128s052_channels) }, { adc122s021_channels, ARRAY_SIZE(adc122s021_channels) }, + { adc124s021_channels, ARRAY_SIZE(adc124s021_channels) }, }; static const struct iio_info adc128_info = { @@ -177,6 +186,7 @@ static int adc128_remove(struct spi_device *spi) static const struct of_device_id adc128_of_match[] = { { .compatible = "ti,adc128s052", }, { .compatible = "ti,adc122s021", }, + { .compatible = "ti,adc124s021", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, adc128_of_match); @@ -184,6 +194,7 @@ MODULE_DEVICE_TABLE(of, adc128_of_match); static const struct spi_device_id adc128_id[] = { { "adc128s052", 0}, /* index into adc128_config */ { "adc122s021", 1}, + { "adc124s021", 2}, { } }; MODULE_DEVICE_TABLE(spi, adc128_id); diff --git b/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c new file mode 100644 index 0000000..73cbf0b --- /dev/null +++ b/drivers/iio/adc/ti-ads1015.c @@ -0,0 +1,612 @@ +/* + * ADS1015 - Texas Instruments Analog-to-Digital Converter + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for ADS1015 ADC 7-bit I2C slave address: + * * 0x48 - ADDR connected to Ground + * * 0x49 - ADDR connected to Vdd + * * 0x4A - ADDR connected to SDA + * * 0x4B - ADDR connected to SCL + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include + +#define ADS1015_DRV_NAME "ads1015" + +#define ADS1015_CONV_REG 0x00 +#define ADS1015_CFG_REG 0x01 + +#define ADS1015_CFG_DR_SHIFT 5 +#define ADS1015_CFG_MOD_SHIFT 8 +#define ADS1015_CFG_PGA_SHIFT 9 +#define ADS1015_CFG_MUX_SHIFT 12 + +#define ADS1015_CFG_DR_MASK GENMASK(7, 5) +#define ADS1015_CFG_MOD_MASK BIT(8) +#define ADS1015_CFG_PGA_MASK GENMASK(11, 9) +#define ADS1015_CFG_MUX_MASK GENMASK(14, 12) + +/* device operating modes */ +#define ADS1015_CONTINUOUS 0 +#define ADS1015_SINGLESHOT 1 + +#define ADS1015_SLEEP_DELAY_MS 2000 +#define ADS1015_DEFAULT_PGA 2 +#define ADS1015_DEFAULT_DATA_RATE 4 +#define ADS1015_DEFAULT_CHAN 0 + +enum ads1015_channels { + ADS1015_AIN0_AIN1 = 0, + ADS1015_AIN0_AIN3, + ADS1015_AIN1_AIN3, + ADS1015_AIN2_AIN3, + ADS1015_AIN0, + ADS1015_AIN1, + ADS1015_AIN2, + ADS1015_AIN3, + ADS1015_TIMESTAMP, +}; + +static const unsigned int ads1015_data_rate[] = { + 128, 250, 490, 920, 1600, 2400, 3300, 3300 +}; + +static const struct { + int scale; + int uscale; +} ads1015_scale[] = { + {3, 0}, + {2, 0}, + {1, 0}, + {0, 500000}, + {0, 250000}, + {0, 125000}, + {0, 125000}, + {0, 125000}, +}; + +#define ADS1015_V_CHAN(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +#define ADS1015_V_DIFF_CHAN(_chan, _chan2, _addr) { \ + .type = IIO_VOLTAGE, \ + .differential = 1, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .channel2 = _chan2, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +struct ads1015_data { + struct regmap *regmap; + /* + * Protects ADC ops, e.g: concurrent sysfs/buffered + * data reads, configuration updates + */ + struct mutex lock; + struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; +}; + +static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return (reg == ADS1015_CFG_REG); +} + +static const struct regmap_config ads1015_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ADS1015_CFG_REG, + .writeable_reg = ads1015_is_writeable_reg, +}; + +static const struct iio_chan_spec ads1015_channels[] = { + ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1), + ADS1015_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3), + ADS1015_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3), + ADS1015_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3), + ADS1015_V_CHAN(0, ADS1015_AIN0), + ADS1015_V_CHAN(1, ADS1015_AIN1), + ADS1015_V_CHAN(2, ADS1015_AIN2), + ADS1015_V_CHAN(3, ADS1015_AIN3), + IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), +}; + +static int ads1015_set_power_state(struct ads1015_data *data, bool on) +{ + int ret; + struct device *dev = regmap_get_device(data->regmap); + + if (on) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + pm_runtime_put_noidle(dev); + } else { + pm_runtime_mark_last_busy(dev); + ret = pm_runtime_put_autosuspend(dev); + } + + return ret; +} + +static +int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) +{ + int ret, pga, dr, conv_time; + bool change; + + if (chan < 0 || chan >= ADS1015_CHANNELS) + return -EINVAL; + + pga = data->channel_data[chan].pga; + dr = data->channel_data[chan].data_rate; + + ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MUX_MASK | + ADS1015_CFG_PGA_MASK, + chan << ADS1015_CFG_MUX_SHIFT | + pga << ADS1015_CFG_PGA_SHIFT, + &change); + if (ret < 0) + return ret; + + if (change) { + conv_time = DIV_ROUND_UP(USEC_PER_SEC, ads1015_data_rate[dr]); + usleep_range(conv_time, conv_time + 1); + } + + return regmap_read(data->regmap, ADS1015_CONV_REG, val); +} + +static irqreturn_t ads1015_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ads1015_data *data = iio_priv(indio_dev); + s16 buf[8]; /* 1x s16 ADC val + 3x s16 padding + 4x s16 timestamp */ + int chan, ret, res; + + memset(buf, 0, sizeof(buf)); + + mutex_lock(&data->lock); + chan = find_first_bit(indio_dev->active_scan_mask, + indio_dev->masklength); + ret = ads1015_get_adc_result(data, chan, &res); + if (ret < 0) { + mutex_unlock(&data->lock); + goto err; + } + + buf[0] = res; + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int ads1015_set_scale(struct ads1015_data *data, int chan, + int scale, int uscale) +{ + int i, ret, rindex = -1; + + for (i = 0; i < ARRAY_SIZE(ads1015_scale); i++) + if (ads1015_scale[i].scale == scale && + ads1015_scale[i].uscale == uscale) { + rindex = i; + break; + } + if (rindex < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_PGA_MASK, + rindex << ADS1015_CFG_PGA_SHIFT); + if (ret < 0) + return ret; + + data->channel_data[chan].pga = rindex; + + return 0; +} + +static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate) +{ + int i, ret, rindex = -1; + + for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) + if (ads1015_data_rate[i] == rate) { + rindex = i; + break; + } + if (rindex < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_DR_MASK, + rindex << ADS1015_CFG_DR_SHIFT); + if (ret < 0) + return ret; + + data->channel_data[chan].data_rate = rindex; + + return 0; +} + +static int ads1015_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret, idx; + struct ads1015_data *data = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + mutex_lock(&data->lock); + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) { + ret = -EBUSY; + break; + } + + ret = ads1015_set_power_state(data, true); + if (ret < 0) + break; + + ret = ads1015_get_adc_result(data, chan->address, val); + if (ret < 0) { + ads1015_set_power_state(data, false); + break; + } + + /* 12 bit res, D0 is bit 4 in conversion register */ + *val = sign_extend32(*val >> 4, 11); + + ret = ads1015_set_power_state(data, false); + if (ret < 0) + break; + + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + idx = data->channel_data[chan->address].pga; + *val = ads1015_scale[idx].scale; + *val2 = ads1015_scale[idx].uscale; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + idx = data->channel_data[chan->address].data_rate; + *val = ads1015_data_rate[idx]; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int ads1015_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ads1015_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->lock); + switch (mask) { + case IIO_CHAN_INFO_SCALE: + ret = ads1015_set_scale(data, chan->address, val, val2); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = ads1015_set_data_rate(data, chan->address, val); + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + + return ret; +} + +static int ads1015_buffer_preenable(struct iio_dev *indio_dev) +{ + return ads1015_set_power_state(iio_priv(indio_dev), true); +} + +static int ads1015_buffer_postdisable(struct iio_dev *indio_dev) +{ + return ads1015_set_power_state(iio_priv(indio_dev), false); +} + +static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = { + .preenable = ads1015_buffer_preenable, + .postenable = iio_triggered_buffer_postenable, + .predisable = iio_triggered_buffer_predisable, + .postdisable = ads1015_buffer_postdisable, + .validate_scan_mask = &iio_validate_scan_mask_onehot, +}; + +static IIO_CONST_ATTR(scale_available, "3 2 1 0.5 0.25 0.125"); +static IIO_CONST_ATTR(sampling_frequency_available, + "128 250 490 920 1600 2400 3300"); + +static struct attribute *ads1015_attributes[] = { + &iio_const_attr_scale_available.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ads1015_attribute_group = { + .attrs = ads1015_attributes, +}; + +static const struct iio_info ads1015_info = { + .driver_module = THIS_MODULE, + .read_raw = ads1015_read_raw, + .write_raw = ads1015_write_raw, + .attrs = &ads1015_attribute_group, +}; + +#ifdef CONFIG_OF +static int ads1015_get_channels_config_of(struct i2c_client *client) +{ + struct ads1015_data *data = i2c_get_clientdata(client); + struct device_node *node; + + if (!client->dev.of_node || + !of_get_next_child(client->dev.of_node, NULL)) + return -EINVAL; + + for_each_child_of_node(client->dev.of_node, node) { + u32 pval; + unsigned int channel; + unsigned int pga = ADS1015_DEFAULT_PGA; + unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE; + + if (of_property_read_u32(node, "reg", &pval)) { + dev_err(&client->dev, "invalid reg on %s\n", + node->full_name); + continue; + } + + channel = pval; + if (channel >= ADS1015_CHANNELS) { + dev_err(&client->dev, + "invalid channel index %d on %s\n", + channel, node->full_name); + continue; + } + + if (!of_property_read_u32(node, "ti,gain", &pval)) { + pga = pval; + if (pga > 6) { + dev_err(&client->dev, "invalid gain on %s\n", + node->full_name); + return -EINVAL; + } + } + + if (!of_property_read_u32(node, "ti,datarate", &pval)) { + data_rate = pval; + if (data_rate > 7) { + dev_err(&client->dev, + "invalid data_rate on %s\n", + node->full_name); + return -EINVAL; + } + } + + data->channel_data[channel].pga = pga; + data->channel_data[channel].data_rate = data_rate; + } + + return 0; +} +#endif + +static void ads1015_get_channels_config(struct i2c_client *client) +{ + unsigned int k; + + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ads1015_data *data = iio_priv(indio_dev); + struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev); + + /* prefer platform data */ + if (pdata) { + memcpy(data->channel_data, pdata->channel_data, + sizeof(data->channel_data)); + return; + } + +#ifdef CONFIG_OF + if (!ads1015_get_channels_config_of(client)) + return; +#endif + /* fallback on default configuration */ + for (k = 0; k < ADS1015_CHANNELS; ++k) { + data->channel_data[k].pga = ADS1015_DEFAULT_PGA; + data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE; + } +} + +static int ads1015_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ads1015_data *data; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &ads1015_info; + indio_dev->name = ADS1015_DRV_NAME; + indio_dev->channels = ads1015_channels; + indio_dev->num_channels = ARRAY_SIZE(ads1015_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + /* we need to keep this ABI the same as used by hwmon ADS1015 driver */ + ads1015_get_channels_config(client); + + data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "Failed to allocate register map\n"); + return PTR_ERR(data->regmap); + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + ads1015_trigger_handler, + &ads1015_buffer_setup_ops); + if (ret < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + return ret; + } + ret = pm_runtime_set_active(&client->dev); + if (ret) + goto err_buffer_cleanup; + pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_enable(&client->dev); + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "Failed to register IIO device\n"); + goto err_buffer_cleanup; + } + + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + + return ret; +} + +static int ads1015_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ads1015_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + + iio_triggered_buffer_cleanup(indio_dev); + + /* power down single shot mode */ + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT); +} + +#ifdef CONFIG_PM +static int ads1015_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ads1015_data *data = iio_priv(indio_dev); + + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT); +} + +static int ads1015_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ads1015_data *data = iio_priv(indio_dev); + + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT); +} +#endif + +static const struct dev_pm_ops ads1015_pm_ops = { + SET_RUNTIME_PM_OPS(ads1015_runtime_suspend, + ads1015_runtime_resume, NULL) +}; + +static const struct i2c_device_id ads1015_id[] = { + {"ads1015", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ads1015_id); + +static struct i2c_driver ads1015_driver = { + .driver = { + .name = ADS1015_DRV_NAME, + .pm = &ads1015_pm_ops, + }, + .probe = ads1015_probe, + .remove = ads1015_remove, + .id_table = ads1015_id, +}; + +module_i2c_driver(ads1015_driver); + +MODULE_AUTHOR("Daniel Baluta "); +MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c new file mode 100644 index 0000000..03e9070 --- /dev/null +++ b/drivers/iio/adc/ti-ads8688.c @@ -0,0 +1,486 @@ +/* + * Copyright (C) 2015 Prevas A/S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define ADS8688_CMD_REG(x) (x << 8) +#define ADS8688_CMD_REG_NOOP 0x00 +#define ADS8688_CMD_REG_RST 0x85 +#define ADS8688_CMD_REG_MAN_CH(chan) (0xC0 | (4 * chan)) +#define ADS8688_CMD_DONT_CARE_BITS 16 + +#define ADS8688_PROG_REG(x) (x << 9) +#define ADS8688_PROG_REG_RANGE_CH(chan) (0x05 + chan) +#define ADS8688_PROG_WR_BIT BIT(8) +#define ADS8688_PROG_DONT_CARE_BITS 8 + +#define ADS8688_REG_PLUSMINUS25VREF 0 +#define ADS8688_REG_PLUSMINUS125VREF 1 +#define ADS8688_REG_PLUSMINUS0625VREF 2 +#define ADS8688_REG_PLUS25VREF 5 +#define ADS8688_REG_PLUS125VREF 6 + +#define ADS8688_VREF_MV 4096 +#define ADS8688_REALBITS 16 + +/* + * enum ads8688_range - ADS8688 reference voltage range + * @ADS8688_PLUSMINUS25VREF: Device is configured for input range ±2.5 * VREF + * @ADS8688_PLUSMINUS125VREF: Device is configured for input range ±1.25 * VREF + * @ADS8688_PLUSMINUS0625VREF: Device is configured for input range ±0.625 * VREF + * @ADS8688_PLUS25VREF: Device is configured for input range 0 - 2.5 * VREF + * @ADS8688_PLUS125VREF: Device is configured for input range 0 - 1.25 * VREF + */ +enum ads8688_range { + ADS8688_PLUSMINUS25VREF, + ADS8688_PLUSMINUS125VREF, + ADS8688_PLUSMINUS0625VREF, + ADS8688_PLUS25VREF, + ADS8688_PLUS125VREF, +}; + +struct ads8688_chip_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; +}; + +struct ads8688_state { + struct mutex lock; + const struct ads8688_chip_info *chip_info; + struct spi_device *spi; + struct regulator *reg; + unsigned int vref_mv; + enum ads8688_range range[8]; + union { + __be32 d32; + u8 d8[4]; + } data[2] ____cacheline_aligned; +}; + +enum ads8688_id { + ID_ADS8684, + ID_ADS8688, +}; + +struct ads8688_ranges { + enum ads8688_range range; + unsigned int scale; + int offset; + u8 reg; +}; + +static const struct ads8688_ranges ads8688_range_def[5] = { + { + .range = ADS8688_PLUSMINUS25VREF, + .scale = 76295, + .offset = -(1 << (ADS8688_REALBITS - 1)), + .reg = ADS8688_REG_PLUSMINUS25VREF, + }, { + .range = ADS8688_PLUSMINUS125VREF, + .scale = 38148, + .offset = -(1 << (ADS8688_REALBITS - 1)), + .reg = ADS8688_REG_PLUSMINUS125VREF, + }, { + .range = ADS8688_PLUSMINUS0625VREF, + .scale = 19074, + .offset = -(1 << (ADS8688_REALBITS - 1)), + .reg = ADS8688_REG_PLUSMINUS0625VREF, + }, { + .range = ADS8688_PLUS25VREF, + .scale = 38148, + .offset = 0, + .reg = ADS8688_REG_PLUS25VREF, + }, { + .range = ADS8688_PLUS125VREF, + .scale = 19074, + .offset = 0, + .reg = ADS8688_REG_PLUS125VREF, + } +}; + +static ssize_t ads8688_show_scales(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ads8688_state *st = iio_priv(dev_to_iio_dev(dev)); + + return sprintf(buf, "0.%09u 0.%09u 0.%09u\n", + ads8688_range_def[0].scale * st->vref_mv, + ads8688_range_def[1].scale * st->vref_mv, + ads8688_range_def[2].scale * st->vref_mv); +} + +static ssize_t ads8688_show_offsets(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d %d\n", ads8688_range_def[0].offset, + ads8688_range_def[3].offset); +} + +static IIO_DEVICE_ATTR(in_voltage_scale_available, S_IRUGO, + ads8688_show_scales, NULL, 0); +static IIO_DEVICE_ATTR(in_voltage_offset_available, S_IRUGO, + ads8688_show_offsets, NULL, 0); + +static struct attribute *ads8688_attributes[] = { + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage_offset_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ads8688_attribute_group = { + .attrs = ads8688_attributes, +}; + +#define ADS8688_CHAN(index) \ +{ \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = index, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \ + | BIT(IIO_CHAN_INFO_SCALE) \ + | BIT(IIO_CHAN_INFO_OFFSET), \ +} + +static const struct iio_chan_spec ads8684_channels[] = { + ADS8688_CHAN(0), + ADS8688_CHAN(1), + ADS8688_CHAN(2), + ADS8688_CHAN(3), +}; + +static const struct iio_chan_spec ads8688_channels[] = { + ADS8688_CHAN(0), + ADS8688_CHAN(1), + ADS8688_CHAN(2), + ADS8688_CHAN(3), + ADS8688_CHAN(4), + ADS8688_CHAN(5), + ADS8688_CHAN(6), + ADS8688_CHAN(7), +}; + +static int ads8688_prog_write(struct iio_dev *indio_dev, unsigned int addr, + unsigned int val) +{ + struct ads8688_state *st = iio_priv(indio_dev); + u32 tmp; + + tmp = ADS8688_PROG_REG(addr) | ADS8688_PROG_WR_BIT | val; + tmp <<= ADS8688_PROG_DONT_CARE_BITS; + st->data[0].d32 = cpu_to_be32(tmp); + + return spi_write(st->spi, &st->data[0].d8[1], 3); +} + +static int ads8688_reset(struct iio_dev *indio_dev) +{ + struct ads8688_state *st = iio_priv(indio_dev); + u32 tmp; + + tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_RST); + tmp <<= ADS8688_CMD_DONT_CARE_BITS; + st->data[0].d32 = cpu_to_be32(tmp); + + return spi_write(st->spi, &st->data[0].d8[0], 4); +} + +static int ads8688_read(struct iio_dev *indio_dev, unsigned int chan) +{ + struct ads8688_state *st = iio_priv(indio_dev); + int ret; + u32 tmp; + struct spi_transfer t[] = { + { + .tx_buf = &st->data[0].d8[0], + .len = 4, + .cs_change = 1, + }, { + .tx_buf = &st->data[1].d8[0], + .rx_buf = &st->data[1].d8[0], + .len = 4, + }, + }; + + tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_MAN_CH(chan)); + tmp <<= ADS8688_CMD_DONT_CARE_BITS; + st->data[0].d32 = cpu_to_be32(tmp); + + tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_NOOP); + tmp <<= ADS8688_CMD_DONT_CARE_BITS; + st->data[1].d32 = cpu_to_be32(tmp); + + ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t)); + if (ret < 0) + return ret; + + return be32_to_cpu(st->data[1].d32) & 0xffff; +} + +static int ads8688_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long m) +{ + int ret, offset; + unsigned long scale_mv; + + struct ads8688_state *st = iio_priv(indio_dev); + + mutex_lock(&st->lock); + switch (m) { + case IIO_CHAN_INFO_RAW: + ret = ads8688_read(indio_dev, chan->channel); + mutex_unlock(&st->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + scale_mv = st->vref_mv; + scale_mv *= ads8688_range_def[st->range[chan->channel]].scale; + *val = 0; + *val2 = scale_mv; + mutex_unlock(&st->lock); + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OFFSET: + offset = ads8688_range_def[st->range[chan->channel]].offset; + *val = offset; + mutex_unlock(&st->lock); + return IIO_VAL_INT; + } + mutex_unlock(&st->lock); + + return -EINVAL; +} + +static int ads8688_write_reg_range(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + enum ads8688_range range) +{ + unsigned int tmp; + int ret; + + tmp = ADS8688_PROG_REG_RANGE_CH(chan->channel); + ret = ads8688_prog_write(indio_dev, tmp, range); + + return ret; +} + +static int ads8688_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ads8688_state *st = iio_priv(indio_dev); + unsigned int scale = 0; + int ret = -EINVAL, i, offset = 0; + + mutex_lock(&st->lock); + switch (mask) { + case IIO_CHAN_INFO_SCALE: + /* If the offset is 0 the ±2.5 * VREF mode is not available */ + offset = ads8688_range_def[st->range[chan->channel]].offset; + if (offset == 0 && val2 == ads8688_range_def[0].scale * st->vref_mv) { + mutex_unlock(&st->lock); + return -EINVAL; + } + + /* Lookup new mode */ + for (i = 0; i < ARRAY_SIZE(ads8688_range_def); i++) + if (val2 == ads8688_range_def[i].scale * st->vref_mv && + offset == ads8688_range_def[i].offset) { + ret = ads8688_write_reg_range(indio_dev, chan, + ads8688_range_def[i].reg); + break; + } + break; + case IIO_CHAN_INFO_OFFSET: + /* + * There are only two available offsets: + * 0 and -(1 << (ADS8688_REALBITS - 1)) + */ + if (!(ads8688_range_def[0].offset == val || + ads8688_range_def[3].offset == val)) { + mutex_unlock(&st->lock); + return -EINVAL; + } + + /* + * If the device are in ±2.5 * VREF mode, it's not allowed to + * switch to a mode where the offset is 0 + */ + if (val == 0 && + st->range[chan->channel] == ADS8688_PLUSMINUS25VREF) { + mutex_unlock(&st->lock); + return -EINVAL; + } + + scale = ads8688_range_def[st->range[chan->channel]].scale; + + /* Lookup new mode */ + for (i = 0; i < ARRAY_SIZE(ads8688_range_def); i++) + if (val == ads8688_range_def[i].offset && + scale == ads8688_range_def[i].scale) { + ret = ads8688_write_reg_range(indio_dev, chan, + ads8688_range_def[i].reg); + break; + } + break; + } + + if (!ret) + st->range[chan->channel] = ads8688_range_def[i].range; + + mutex_unlock(&st->lock); + + return ret; +} + +static int ads8688_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OFFSET: + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static const struct iio_info ads8688_info = { + .read_raw = &ads8688_read_raw, + .write_raw = &ads8688_write_raw, + .write_raw_get_fmt = &ads8688_write_raw_get_fmt, + .attrs = &ads8688_attribute_group, + .driver_module = THIS_MODULE, +}; + +static const struct ads8688_chip_info ads8688_chip_info_tbl[] = { + [ID_ADS8684] = { + .channels = ads8684_channels, + .num_channels = ARRAY_SIZE(ads8684_channels), + }, + [ID_ADS8688] = { + .channels = ads8688_channels, + .num_channels = ARRAY_SIZE(ads8688_channels), + }, +}; + +static int ads8688_probe(struct spi_device *spi) +{ + struct ads8688_state *st; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (indio_dev == NULL) + return -ENOMEM; + + st = iio_priv(indio_dev); + + st->reg = devm_regulator_get_optional(&spi->dev, "vref"); + if (!IS_ERR(st->reg)) { + ret = regulator_enable(st->reg); + if (ret) + return ret; + + ret = regulator_get_voltage(st->reg); + if (ret < 0) + goto error_out; + + st->vref_mv = ret / 1000; + } else { + /* Use internal reference */ + st->vref_mv = ADS8688_VREF_MV; + } + + st->chip_info = &ads8688_chip_info_tbl[spi_get_device_id(spi)->driver_data]; + + spi->mode = SPI_MODE_1; + + spi_set_drvdata(spi, indio_dev); + + st->spi = spi; + + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = st->chip_info->channels; + indio_dev->num_channels = st->chip_info->num_channels; + indio_dev->info = &ads8688_info; + + ads8688_reset(indio_dev); + + mutex_init(&st->lock); + + ret = iio_device_register(indio_dev); + if (ret) + goto error_out; + + return 0; + +error_out: + if (!IS_ERR_OR_NULL(st->reg)) + regulator_disable(st->reg); + + return ret; +} + +static int ads8688_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ads8688_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + if (!IS_ERR_OR_NULL(st->reg)) + regulator_disable(st->reg); + + return 0; +} + +static const struct spi_device_id ads8688_id[] = { + {"ads8684", ID_ADS8684}, + {"ads8688", ID_ADS8688}, + {} +}; +MODULE_DEVICE_TABLE(spi, ads8688_id); + +static const struct of_device_id ads8688_of_match[] = { + { .compatible = "ti,ads8684" }, + { .compatible = "ti,ads8688" }, + { } +}; +MODULE_DEVICE_TABLE(of, ads8688_of_match); + +static struct spi_driver ads8688_driver = { + .driver = { + .name = "ads8688", + .owner = THIS_MODULE, + }, + .probe = ads8688_probe, + .remove = ads8688_remove, + .id_table = ads8688_id, +}; +module_spi_driver(ads8688_driver); + +MODULE_AUTHOR("Sean Nyekjaer "); +MODULE_DESCRIPTION("Texas Instruments ADS8688 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 02e636a..0a6beb3 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -803,7 +803,7 @@ err: return ret; } -static struct iio_buffer_setup_ops xadc_buffer_ops = { +static const struct iio_buffer_setup_ops xadc_buffer_ops = { .preenable = &xadc_preenable, .postenable = &iio_triggered_buffer_postenable, .predisable = &iio_triggered_buffer_predisable, diff --git a/drivers/iio/buffer/Kconfig b/drivers/iio/buffer/Kconfig index 0a7b2fd..4ffd3db 100644 --- a/drivers/iio/buffer/Kconfig +++ b/drivers/iio/buffer/Kconfig @@ -9,6 +9,26 @@ config IIO_BUFFER_CB Should be selected by any drivers that do in-kernel push usage. That is, those where the data is pushed to the consumer. +config IIO_BUFFER_DMA + tristate + help + Provides the generic IIO DMA buffer infrastructure that can be used by + drivers for devices with DMA support to implement the IIO buffer. + + Should be selected by drivers that want to use the generic DMA buffer + infrastructure. + +config IIO_BUFFER_DMAENGINE + tristate + select IIO_BUFFER_DMA + help + Provides a bonding of the generic IIO DMA buffer infrastructure with the + DMAengine framework. This can be used by converter drivers with a DMA port + connected to an external DMA controller which is supported by the + DMAengine framework. + + Should be selected by drivers that want to use this functionality. + config IIO_KFIFO_BUF tristate "Industrial I/O buffering based on kfifo" help diff --git a/drivers/iio/buffer/Makefile b/drivers/iio/buffer/Makefile index 4d193b9..85beaae 100644 --- a/drivers/iio/buffer/Makefile +++ b/drivers/iio/buffer/Makefile @@ -4,5 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_IIO_BUFFER_CB) += industrialio-buffer-cb.o +obj-$(CONFIG_IIO_BUFFER_DMA) += industrialio-buffer-dma.o +obj-$(CONFIG_IIO_BUFFER_DMAENGINE) += industrialio-buffer-dmaengine.o obj-$(CONFIG_IIO_TRIGGERED_BUFFER) += industrialio-triggered-buffer.o obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o diff --git b/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c new file mode 100644 index 0000000..212cbed --- /dev/null +++ b/drivers/iio/buffer/industrialio-buffer-dma.c @@ -0,0 +1,683 @@ +/* + * Copyright 2013-2015 Analog Devices Inc. + * Author: Lars-Peter Clausen + * + * Licensed under the GPL-2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * For DMA buffers the storage is sub-divided into so called blocks. Each block + * has its own memory buffer. The size of the block is the granularity at which + * memory is exchanged between the hardware and the application. Increasing the + * basic unit of data exchange from one sample to one block decreases the + * management overhead that is associated with each sample. E.g. if we say the + * management overhead for one exchange is x and the unit of exchange is one + * sample the overhead will be x for each sample. Whereas when using a block + * which contains n samples the overhead per sample is reduced to x/n. This + * allows to achieve much higher samplerates than what can be sustained with + * the one sample approach. + * + * Blocks are exchanged between the DMA controller and the application via the + * means of two queues. The incoming queue and the outgoing queue. Blocks on the + * incoming queue are waiting for the DMA controller to pick them up and fill + * them with data. Block on the outgoing queue have been filled with data and + * are waiting for the application to dequeue them and read the data. + * + * A block can be in one of the following states: + * * Owned by the application. In this state the application can read data from + * the block. + * * On the incoming list: Blocks on the incoming list are queued up to be + * processed by the DMA controller. + * * Owned by the DMA controller: The DMA controller is processing the block + * and filling it with data. + * * On the outgoing list: Blocks on the outgoing list have been successfully + * processed by the DMA controller and contain data. They can be dequeued by + * the application. + * * Dead: A block that is dead has been marked as to be freed. It might still + * be owned by either the application or the DMA controller at the moment. + * But once they are done processing it instead of going to either the + * incoming or outgoing queue the block will be freed. + * + * In addition to this blocks are reference counted and the memory associated + * with both the block structure as well as the storage memory for the block + * will be freed when the last reference to the block is dropped. This means a + * block must not be accessed without holding a reference. + * + * The iio_dma_buffer implementation provides a generic infrastructure for + * managing the blocks. + * + * A driver for a specific piece of hardware that has DMA capabilities need to + * implement the submit() callback from the iio_dma_buffer_ops structure. This + * callback is supposed to initiate the DMA transfer copying data from the + * converter to the memory region of the block. Once the DMA transfer has been + * completed the driver must call iio_dma_buffer_block_done() for the completed + * block. + * + * Prior to this it must set the bytes_used field of the block contains + * the actual number of bytes in the buffer. Typically this will be equal to the + * size of the block, but if the DMA hardware has certain alignment requirements + * for the transfer length it might choose to use less than the full size. In + * either case it is expected that bytes_used is a multiple of the bytes per + * datum, i.e. the block must not contain partial samples. + * + * The driver must call iio_dma_buffer_block_done() for each block it has + * received through its submit_block() callback, even if it does not actually + * perform a DMA transfer for the block, e.g. because the buffer was disabled + * before the block transfer was started. In this case it should set bytes_used + * to 0. + * + * In addition it is recommended that a driver implements the abort() callback. + * It will be called when the buffer is disabled and can be used to cancel + * pending and stop active transfers. + * + * The specific driver implementation should use the default callback + * implementations provided by this module for the iio_buffer_access_funcs + * struct. It may overload some callbacks with custom variants if the hardware + * has special requirements that are not handled by the generic functions. If a + * driver chooses to overload a callback it has to ensure that the generic + * callback is called from within the custom callback. + */ + +static void iio_buffer_block_release(struct kref *kref) +{ + struct iio_dma_buffer_block *block = container_of(kref, + struct iio_dma_buffer_block, kref); + + WARN_ON(block->state != IIO_BLOCK_STATE_DEAD); + + dma_free_coherent(block->queue->dev, PAGE_ALIGN(block->size), + block->vaddr, block->phys_addr); + + iio_buffer_put(&block->queue->buffer); + kfree(block); +} + +static void iio_buffer_block_get(struct iio_dma_buffer_block *block) +{ + kref_get(&block->kref); +} + +static void iio_buffer_block_put(struct iio_dma_buffer_block *block) +{ + kref_put(&block->kref, iio_buffer_block_release); +} + +/* + * dma_free_coherent can sleep, hence we need to take some special care to be + * able to drop a reference from an atomic context. + */ +static LIST_HEAD(iio_dma_buffer_dead_blocks); +static DEFINE_SPINLOCK(iio_dma_buffer_dead_blocks_lock); + +static void iio_dma_buffer_cleanup_worker(struct work_struct *work) +{ + struct iio_dma_buffer_block *block, *_block; + LIST_HEAD(block_list); + + spin_lock_irq(&iio_dma_buffer_dead_blocks_lock); + list_splice_tail_init(&iio_dma_buffer_dead_blocks, &block_list); + spin_unlock_irq(&iio_dma_buffer_dead_blocks_lock); + + list_for_each_entry_safe(block, _block, &block_list, head) + iio_buffer_block_release(&block->kref); +} +static DECLARE_WORK(iio_dma_buffer_cleanup_work, iio_dma_buffer_cleanup_worker); + +static void iio_buffer_block_release_atomic(struct kref *kref) +{ + struct iio_dma_buffer_block *block; + unsigned long flags; + + block = container_of(kref, struct iio_dma_buffer_block, kref); + + spin_lock_irqsave(&iio_dma_buffer_dead_blocks_lock, flags); + list_add_tail(&block->head, &iio_dma_buffer_dead_blocks); + spin_unlock_irqrestore(&iio_dma_buffer_dead_blocks_lock, flags); + + schedule_work(&iio_dma_buffer_cleanup_work); +} + +/* + * Version of iio_buffer_block_put() that can be called from atomic context + */ +static void iio_buffer_block_put_atomic(struct iio_dma_buffer_block *block) +{ + kref_put(&block->kref, iio_buffer_block_release_atomic); +} + +static struct iio_dma_buffer_queue *iio_buffer_to_queue(struct iio_buffer *buf) +{ + return container_of(buf, struct iio_dma_buffer_queue, buffer); +} + +static struct iio_dma_buffer_block *iio_dma_buffer_alloc_block( + struct iio_dma_buffer_queue *queue, size_t size) +{ + struct iio_dma_buffer_block *block; + + block = kzalloc(sizeof(*block), GFP_KERNEL); + if (!block) + return NULL; + + block->vaddr = dma_alloc_coherent(queue->dev, PAGE_ALIGN(size), + &block->phys_addr, GFP_KERNEL); + if (!block->vaddr) { + kfree(block); + return NULL; + } + + block->size = size; + block->state = IIO_BLOCK_STATE_DEQUEUED; + block->queue = queue; + INIT_LIST_HEAD(&block->head); + kref_init(&block->kref); + + iio_buffer_get(&queue->buffer); + + return block; +} + +static void _iio_dma_buffer_block_done(struct iio_dma_buffer_block *block) +{ + struct iio_dma_buffer_queue *queue = block->queue; + + /* + * The buffer has already been freed by the application, just drop the + * reference. + */ + if (block->state != IIO_BLOCK_STATE_DEAD) { + block->state = IIO_BLOCK_STATE_DONE; + list_add_tail(&block->head, &queue->outgoing); + } +} + +/** + * iio_dma_buffer_block_done() - Indicate that a block has been completed + * @block: The completed block + * + * Should be called when the DMA controller has finished handling the block to + * pass back ownership of the block to the queue. + */ +void iio_dma_buffer_block_done(struct iio_dma_buffer_block *block) +{ + struct iio_dma_buffer_queue *queue = block->queue; + unsigned long flags; + + spin_lock_irqsave(&queue->list_lock, flags); + _iio_dma_buffer_block_done(block); + spin_unlock_irqrestore(&queue->list_lock, flags); + + iio_buffer_block_put_atomic(block); + wake_up_interruptible_poll(&queue->buffer.pollq, POLLIN | POLLRDNORM); +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_block_done); + +/** + * iio_dma_buffer_block_list_abort() - Indicate that a list block has been + * aborted + * @queue: Queue for which to complete blocks. + * @list: List of aborted blocks. All blocks in this list must be from @queue. + * + * Typically called from the abort() callback after the DMA controller has been + * stopped. This will set bytes_used to 0 for each block in the list and then + * hand the blocks back to the queue. + */ +void iio_dma_buffer_block_list_abort(struct iio_dma_buffer_queue *queue, + struct list_head *list) +{ + struct iio_dma_buffer_block *block, *_block; + unsigned long flags; + + spin_lock_irqsave(&queue->list_lock, flags); + list_for_each_entry_safe(block, _block, list, head) { + list_del(&block->head); + block->bytes_used = 0; + _iio_dma_buffer_block_done(block); + iio_buffer_block_put_atomic(block); + } + spin_unlock_irqrestore(&queue->list_lock, flags); + + wake_up_interruptible_poll(&queue->buffer.pollq, POLLIN | POLLRDNORM); +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_block_list_abort); + +static bool iio_dma_block_reusable(struct iio_dma_buffer_block *block) +{ + /* + * If the core owns the block it can be re-used. This should be the + * default case when enabling the buffer, unless the DMA controller does + * not support abort and has not given back the block yet. + */ + switch (block->state) { + case IIO_BLOCK_STATE_DEQUEUED: + case IIO_BLOCK_STATE_QUEUED: + case IIO_BLOCK_STATE_DONE: + return true; + default: + return false; + } +} + +/** + * iio_dma_buffer_request_update() - DMA buffer request_update callback + * @buffer: The buffer which to request an update + * + * Should be used as the iio_dma_buffer_request_update() callback for + * iio_buffer_access_ops struct for DMA buffers. + */ +int iio_dma_buffer_request_update(struct iio_buffer *buffer) +{ + struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); + struct iio_dma_buffer_block *block; + bool try_reuse = false; + size_t size; + int ret = 0; + int i; + + /* + * Split the buffer into two even parts. This is used as a double + * buffering scheme with usually one block at a time being used by the + * DMA and the other one by the application. + */ + size = DIV_ROUND_UP(queue->buffer.bytes_per_datum * + queue->buffer.length, 2); + + mutex_lock(&queue->lock); + + /* Allocations are page aligned */ + if (PAGE_ALIGN(queue->fileio.block_size) == PAGE_ALIGN(size)) + try_reuse = true; + + queue->fileio.block_size = size; + queue->fileio.active_block = NULL; + + spin_lock_irq(&queue->list_lock); + for (i = 0; i < 2; i++) { + block = queue->fileio.blocks[i]; + + /* If we can't re-use it free it */ + if (block && (!iio_dma_block_reusable(block) || !try_reuse)) + block->state = IIO_BLOCK_STATE_DEAD; + } + + /* + * At this point all blocks are either owned by the core or marked as + * dead. This means we can reset the lists without having to fear + * corrution. + */ + INIT_LIST_HEAD(&queue->outgoing); + spin_unlock_irq(&queue->list_lock); + + INIT_LIST_HEAD(&queue->incoming); + + for (i = 0; i < 2; i++) { + if (queue->fileio.blocks[i]) { + block = queue->fileio.blocks[i]; + if (block->state == IIO_BLOCK_STATE_DEAD) { + /* Could not reuse it */ + iio_buffer_block_put(block); + block = NULL; + } else { + block->size = size; + } + } else { + block = NULL; + } + + if (!block) { + block = iio_dma_buffer_alloc_block(queue, size); + if (!block) { + ret = -ENOMEM; + goto out_unlock; + } + queue->fileio.blocks[i] = block; + } + + block->state = IIO_BLOCK_STATE_QUEUED; + list_add_tail(&block->head, &queue->incoming); + } + +out_unlock: + mutex_unlock(&queue->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_request_update); + +static void iio_dma_buffer_submit_block(struct iio_dma_buffer_queue *queue, + struct iio_dma_buffer_block *block) +{ + int ret; + + /* + * If the hardware has already been removed we put the block into + * limbo. It will neither be on the incoming nor outgoing list, nor will + * it ever complete. It will just wait to be freed eventually. + */ + if (!queue->ops) + return; + + block->state = IIO_BLOCK_STATE_ACTIVE; + iio_buffer_block_get(block); + ret = queue->ops->submit(queue, block); + if (ret) { + /* + * This is a bit of a problem and there is not much we can do + * other then wait for the buffer to be disabled and re-enabled + * and try again. But it should not really happen unless we run + * out of memory or something similar. + * + * TODO: Implement support in the IIO core to allow buffers to + * notify consumers that something went wrong and the buffer + * should be disabled. + */ + iio_buffer_block_put(block); + } +} + +/** + * iio_dma_buffer_enable() - Enable DMA buffer + * @buffer: IIO buffer to enable + * @indio_dev: IIO device the buffer is attached to + * + * Needs to be called when the device that the buffer is attached to starts + * sampling. Typically should be the iio_buffer_access_ops enable callback. + * + * This will allocate the DMA buffers and start the DMA transfers. + */ +int iio_dma_buffer_enable(struct iio_buffer *buffer, + struct iio_dev *indio_dev) +{ + struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); + struct iio_dma_buffer_block *block, *_block; + + mutex_lock(&queue->lock); + queue->active = true; + list_for_each_entry_safe(block, _block, &queue->incoming, head) { + list_del(&block->head); + iio_dma_buffer_submit_block(queue, block); + } + mutex_unlock(&queue->lock); + + return 0; +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_enable); + +/** + * iio_dma_buffer_disable() - Disable DMA buffer + * @buffer: IIO DMA buffer to disable + * @indio_dev: IIO device the buffer is attached to + * + * Needs to be called when the device that the buffer is attached to stops + * sampling. Typically should be the iio_buffer_access_ops disable callback. + */ +int iio_dma_buffer_disable(struct iio_buffer *buffer, + struct iio_dev *indio_dev) +{ + struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); + + mutex_lock(&queue->lock); + queue->active = false; + + if (queue->ops && queue->ops->abort) + queue->ops->abort(queue); + mutex_unlock(&queue->lock); + + return 0; +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_disable); + +static void iio_dma_buffer_enqueue(struct iio_dma_buffer_queue *queue, + struct iio_dma_buffer_block *block) +{ + if (block->state == IIO_BLOCK_STATE_DEAD) { + iio_buffer_block_put(block); + } else if (queue->active) { + iio_dma_buffer_submit_block(queue, block); + } else { + block->state = IIO_BLOCK_STATE_QUEUED; + list_add_tail(&block->head, &queue->incoming); + } +} + +static struct iio_dma_buffer_block *iio_dma_buffer_dequeue( + struct iio_dma_buffer_queue *queue) +{ + struct iio_dma_buffer_block *block; + + spin_lock_irq(&queue->list_lock); + block = list_first_entry_or_null(&queue->outgoing, struct + iio_dma_buffer_block, head); + if (block != NULL) { + list_del(&block->head); + block->state = IIO_BLOCK_STATE_DEQUEUED; + } + spin_unlock_irq(&queue->list_lock); + + return block; +} + +/** + * iio_dma_buffer_read() - DMA buffer read callback + * @buffer: Buffer to read form + * @n: Number of bytes to read + * @user_buffer: Userspace buffer to copy the data to + * + * Should be used as the read_first_n callback for iio_buffer_access_ops + * struct for DMA buffers. + */ +int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, + char __user *user_buffer) +{ + struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); + struct iio_dma_buffer_block *block; + int ret; + + if (n < buffer->bytes_per_datum) + return -EINVAL; + + mutex_lock(&queue->lock); + + if (!queue->fileio.active_block) { + block = iio_dma_buffer_dequeue(queue); + if (block == NULL) { + ret = 0; + goto out_unlock; + } + queue->fileio.pos = 0; + queue->fileio.active_block = block; + } else { + block = queue->fileio.active_block; + } + + n = rounddown(n, buffer->bytes_per_datum); + if (n > block->bytes_used - queue->fileio.pos) + n = block->bytes_used - queue->fileio.pos; + + if (copy_to_user(user_buffer, block->vaddr + queue->fileio.pos, n)) { + ret = -EFAULT; + goto out_unlock; + } + + queue->fileio.pos += n; + + if (queue->fileio.pos == block->bytes_used) { + queue->fileio.active_block = NULL; + iio_dma_buffer_enqueue(queue, block); + } + + ret = n; + +out_unlock: + mutex_unlock(&queue->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_read); + +/** + * iio_dma_buffer_data_available() - DMA buffer data_available callback + * @buf: Buffer to check for data availability + * + * Should be used as the data_available callback for iio_buffer_access_ops + * struct for DMA buffers. + */ +size_t iio_dma_buffer_data_available(struct iio_buffer *buf) +{ + struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buf); + struct iio_dma_buffer_block *block; + size_t data_available = 0; + + /* + * For counting the available bytes we'll use the size of the block not + * the number of actual bytes available in the block. Otherwise it is + * possible that we end up with a value that is lower than the watermark + * but won't increase since all blocks are in use. + */ + + mutex_lock(&queue->lock); + if (queue->fileio.active_block) + data_available += queue->fileio.active_block->size; + + spin_lock_irq(&queue->list_lock); + list_for_each_entry(block, &queue->outgoing, head) + data_available += block->size; + spin_unlock_irq(&queue->list_lock); + mutex_unlock(&queue->lock); + + return data_available; +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_data_available); + +/** + * iio_dma_buffer_set_bytes_per_datum() - DMA buffer set_bytes_per_datum callback + * @buffer: Buffer to set the bytes-per-datum for + * @bpd: The new bytes-per-datum value + * + * Should be used as the set_bytes_per_datum callback for iio_buffer_access_ops + * struct for DMA buffers. + */ +int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd) +{ + buffer->bytes_per_datum = bpd; + + return 0; +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_set_bytes_per_datum); + +/** + * iio_dma_buffer_set_length - DMA buffer set_length callback + * @buffer: Buffer to set the length for + * @length: The new buffer length + * + * Should be used as the set_length callback for iio_buffer_access_ops + * struct for DMA buffers. + */ +int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length) +{ + /* Avoid an invalid state */ + if (length < 2) + length = 2; + buffer->length = length; + buffer->watermark = length / 2; + + return 0; +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_set_length); + +/** + * iio_dma_buffer_init() - Initialize DMA buffer queue + * @queue: Buffer to initialize + * @dev: DMA device + * @ops: DMA buffer queue callback operations + * + * The DMA device will be used by the queue to do DMA memory allocations. So it + * should refer to the device that will perform the DMA to ensure that + * allocations are done from a memory region that can be accessed by the device. + */ +int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, + struct device *dev, const struct iio_dma_buffer_ops *ops) +{ + iio_buffer_init(&queue->buffer); + queue->buffer.length = PAGE_SIZE; + queue->buffer.watermark = queue->buffer.length / 2; + queue->dev = dev; + queue->ops = ops; + + INIT_LIST_HEAD(&queue->incoming); + INIT_LIST_HEAD(&queue->outgoing); + + mutex_init(&queue->lock); + spin_lock_init(&queue->list_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_init); + +/** + * iio_dma_buffer_exit() - Cleanup DMA buffer queue + * @queue: Buffer to cleanup + * + * After this function has completed it is safe to free any resources that are + * associated with the buffer and are accessed inside the callback operations. + */ +void iio_dma_buffer_exit(struct iio_dma_buffer_queue *queue) +{ + unsigned int i; + + mutex_lock(&queue->lock); + + spin_lock_irq(&queue->list_lock); + for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { + if (!queue->fileio.blocks[i]) + continue; + queue->fileio.blocks[i]->state = IIO_BLOCK_STATE_DEAD; + } + INIT_LIST_HEAD(&queue->outgoing); + spin_unlock_irq(&queue->list_lock); + + INIT_LIST_HEAD(&queue->incoming); + + for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { + if (!queue->fileio.blocks[i]) + continue; + iio_buffer_block_put(queue->fileio.blocks[i]); + queue->fileio.blocks[i] = NULL; + } + queue->fileio.active_block = NULL; + queue->ops = NULL; + + mutex_unlock(&queue->lock); +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_exit); + +/** + * iio_dma_buffer_release() - Release final buffer resources + * @queue: Buffer to release + * + * Frees resources that can't yet be freed in iio_dma_buffer_exit(). Should be + * called in the buffers release callback implementation right before freeing + * the memory associated with the buffer. + */ +void iio_dma_buffer_release(struct iio_dma_buffer_queue *queue) +{ + mutex_destroy(&queue->lock); +} +EXPORT_SYMBOL_GPL(iio_dma_buffer_release); + +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_DESCRIPTION("DMA buffer for the IIO framework"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c new file mode 100644 index 0000000..9fabed4 --- /dev/null +++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c @@ -0,0 +1,208 @@ +/* + * Copyright 2014-2015 Analog Devices Inc. + * Author: Lars-Peter Clausen + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * The IIO DMAengine buffer combines the generic IIO DMA buffer infrastructure + * with the DMAengine framework. The generic IIO DMA buffer infrastructure is + * used to manage the buffer memory and implement the IIO buffer operations + * while the DMAengine framework is used to perform the DMA transfers. Combined + * this results in a device independent fully functional DMA buffer + * implementation that can be used by device drivers for peripherals which are + * connected to a DMA controller which has a DMAengine driver implementation. + */ + +struct dmaengine_buffer { + struct iio_dma_buffer_queue queue; + + struct dma_chan *chan; + struct list_head active; + + size_t align; + size_t max_size; +}; + +static struct dmaengine_buffer *iio_buffer_to_dmaengine_buffer( + struct iio_buffer *buffer) +{ + return container_of(buffer, struct dmaengine_buffer, queue.buffer); +} + +static void iio_dmaengine_buffer_block_done(void *data) +{ + struct iio_dma_buffer_block *block = data; + unsigned long flags; + + spin_lock_irqsave(&block->queue->list_lock, flags); + list_del(&block->head); + spin_unlock_irqrestore(&block->queue->list_lock, flags); + iio_dma_buffer_block_done(block); +} + +static int iio_dmaengine_buffer_submit_block(struct iio_dma_buffer_queue *queue, + struct iio_dma_buffer_block *block) +{ + struct dmaengine_buffer *dmaengine_buffer = + iio_buffer_to_dmaengine_buffer(&queue->buffer); + struct dma_async_tx_descriptor *desc; + dma_cookie_t cookie; + + block->bytes_used = min(block->size, dmaengine_buffer->max_size); + block->bytes_used = rounddown(block->bytes_used, + dmaengine_buffer->align); + + desc = dmaengine_prep_slave_single(dmaengine_buffer->chan, + block->phys_addr, block->bytes_used, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!desc) + return -ENOMEM; + + desc->callback = iio_dmaengine_buffer_block_done; + desc->callback_param = block; + + cookie = dmaengine_submit(desc); + if (dma_submit_error(cookie)) + return dma_submit_error(cookie); + + spin_lock_irq(&dmaengine_buffer->queue.list_lock); + list_add_tail(&block->head, &dmaengine_buffer->active); + spin_unlock_irq(&dmaengine_buffer->queue.list_lock); + + dma_async_issue_pending(dmaengine_buffer->chan); + + return 0; +} + +static void iio_dmaengine_buffer_abort(struct iio_dma_buffer_queue *queue) +{ + struct dmaengine_buffer *dmaengine_buffer = + iio_buffer_to_dmaengine_buffer(&queue->buffer); + + dmaengine_terminate_sync(dmaengine_buffer->chan); + iio_dma_buffer_block_list_abort(queue, &dmaengine_buffer->active); +} + +static void iio_dmaengine_buffer_release(struct iio_buffer *buf) +{ + struct dmaengine_buffer *dmaengine_buffer = + iio_buffer_to_dmaengine_buffer(buf); + + iio_dma_buffer_release(&dmaengine_buffer->queue); + kfree(dmaengine_buffer); +} + +static const struct iio_buffer_access_funcs iio_dmaengine_buffer_ops = { + .read_first_n = iio_dma_buffer_read, + .set_bytes_per_datum = iio_dma_buffer_set_bytes_per_datum, + .set_length = iio_dma_buffer_set_length, + .request_update = iio_dma_buffer_request_update, + .enable = iio_dma_buffer_enable, + .disable = iio_dma_buffer_disable, + .data_available = iio_dma_buffer_data_available, + .release = iio_dmaengine_buffer_release, + + .modes = INDIO_BUFFER_HARDWARE, + .flags = INDIO_BUFFER_FLAG_FIXED_WATERMARK, +}; + +static const struct iio_dma_buffer_ops iio_dmaengine_default_ops = { + .submit = iio_dmaengine_buffer_submit_block, + .abort = iio_dmaengine_buffer_abort, +}; + +/** + * iio_dmaengine_buffer_alloc() - Allocate new buffer which uses DMAengine + * @dev: Parent device for the buffer + * @channel: DMA channel name, typically "rx". + * + * This allocates a new IIO buffer which internally uses the DMAengine framework + * to perform its transfers. The parent device will be used to request the DMA + * channel. + * + * Once done using the buffer iio_dmaengine_buffer_free() should be used to + * release it. + */ +struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, + const char *channel) +{ + struct dmaengine_buffer *dmaengine_buffer; + unsigned int width, src_width, dest_width; + struct dma_slave_caps caps; + struct dma_chan *chan; + int ret; + + dmaengine_buffer = kzalloc(sizeof(*dmaengine_buffer), GFP_KERNEL); + if (!dmaengine_buffer) + return ERR_PTR(-ENOMEM); + + chan = dma_request_slave_channel_reason(dev, channel); + if (IS_ERR(chan)) { + ret = PTR_ERR(chan); + goto err_free; + } + + ret = dma_get_slave_caps(chan, &caps); + if (ret < 0) + goto err_free; + + /* Needs to be aligned to the maximum of the minimums */ + if (caps.src_addr_widths) + src_width = __ffs(caps.src_addr_widths); + else + src_width = 1; + if (caps.dst_addr_widths) + dest_width = __ffs(caps.dst_addr_widths); + else + dest_width = 1; + width = max(src_width, dest_width); + + INIT_LIST_HEAD(&dmaengine_buffer->active); + dmaengine_buffer->chan = chan; + dmaengine_buffer->align = width; + dmaengine_buffer->max_size = dma_get_max_seg_size(chan->device->dev); + + iio_dma_buffer_init(&dmaengine_buffer->queue, chan->device->dev, + &iio_dmaengine_default_ops); + + dmaengine_buffer->queue.buffer.access = &iio_dmaengine_buffer_ops; + + return &dmaengine_buffer->queue.buffer; + +err_free: + kfree(dmaengine_buffer); + return ERR_PTR(ret); +} +EXPORT_SYMBOL(iio_dmaengine_buffer_alloc); + +/** + * iio_dmaengine_buffer_free() - Free dmaengine buffer + * @buffer: Buffer to free + * + * Frees a buffer previously allocated with iio_dmaengine_buffer_alloc(). + */ +void iio_dmaengine_buffer_free(struct iio_buffer *buffer) +{ + struct dmaengine_buffer *dmaengine_buffer = + iio_buffer_to_dmaengine_buffer(buffer); + + iio_dma_buffer_exit(&dmaengine_buffer->queue); + dma_release_channel(dmaengine_buffer->chan); + + iio_buffer_put(buffer); +} +EXPORT_SYMBOL_GPL(iio_dmaengine_buffer_free); diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index 3061b72..f73290f 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -4,6 +4,28 @@ menu "Chemical Sensors" +config ATLAS_PH_SENSOR + tristate "Atlas Scientific OEM pH-SM sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IRQ_WORK + help + Say Y here to build I2C interface support for the Atlas + Scientific OEM pH-SM sensor. + + To compile this driver as module, choose M here: the + module will be called atlas-ph-sensor. + +config IAQCORE + tristate "AMS iAQ-Core VOC sensors" + depends on I2C + help + Say Y here to build I2C interface support for the AMS + iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) + sensors + config VZ89X tristate "SGX Sensortech MiCS VZ89X VOC sensor" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 7292f2d..b02202b 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -3,4 +3,6 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-ph-sensor.o +obj-$(CONFIG_IAQCORE) += ams-iaq-core.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git b/drivers/iio/chemical/ams-iaq-core.c b/drivers/iio/chemical/ams-iaq-core.c new file mode 100644 index 0000000..41a8e6f --- /dev/null +++ b/drivers/iio/chemical/ams-iaq-core.c @@ -0,0 +1,200 @@ +/* + * ams-iaq-core.c - Support for AMS iAQ-Core VOC sensors + * + * Copyright (C) 2015 Matt Ranostay + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include + +#define AMS_IAQCORE_DATA_SIZE 9 + +#define AMS_IAQCORE_VOC_CO2_IDX 0 +#define AMS_IAQCORE_VOC_RESISTANCE_IDX 1 +#define AMS_IAQCORE_VOC_TVOC_IDX 2 + +struct ams_iaqcore_reading { + __be16 co2_ppm; + u8 status; + __be32 resistance; + __be16 voc_ppb; +} __attribute__((__packed__)); + +struct ams_iaqcore_data { + struct i2c_client *client; + struct mutex lock; + unsigned long last_update; + + struct ams_iaqcore_reading buffer; +}; + +static const struct iio_chan_spec ams_iaqcore_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_CO2_IDX, + }, + { + .type = IIO_RESISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_RESISTANCE_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_TVOC_IDX, + }, +}; + +static int ams_iaqcore_read_measurement(struct ams_iaqcore_data *data) +{ + struct i2c_client *client = data->client; + int ret; + + struct i2c_msg msg = { + .addr = client->addr, + .flags = client->flags | I2C_M_RD, + .len = AMS_IAQCORE_DATA_SIZE, + .buf = (char *) &data->buffer, + }; + + ret = i2c_transfer(client->adapter, &msg, 1); + + return (ret == AMS_IAQCORE_DATA_SIZE) ? 0 : ret; +} + +static int ams_iaqcore_get_measurement(struct ams_iaqcore_data *data) +{ + int ret; + + /* sensor can only be polled once a second max per datasheet */ + if (!time_after(jiffies, data->last_update + HZ)) + return 0; + + ret = ams_iaqcore_read_measurement(data); + if (ret < 0) + return ret; + + data->last_update = jiffies; + + return 0; +} + +static int ams_iaqcore_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct ams_iaqcore_data *data = iio_priv(indio_dev); + int ret; + + if (mask != IIO_CHAN_INFO_PROCESSED) + return -EINVAL; + + mutex_lock(&data->lock); + ret = ams_iaqcore_get_measurement(data); + + if (ret) + goto err_out; + + switch (chan->address) { + case AMS_IAQCORE_VOC_CO2_IDX: + *val = 0; + *val2 = be16_to_cpu(data->buffer.co2_ppm); + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case AMS_IAQCORE_VOC_RESISTANCE_IDX: + *val = be32_to_cpu(data->buffer.resistance); + ret = IIO_VAL_INT; + break; + case AMS_IAQCORE_VOC_TVOC_IDX: + *val = 0; + *val2 = be16_to_cpu(data->buffer.voc_ppb); + ret = IIO_VAL_INT_PLUS_NANO; + break; + default: + ret = -EINVAL; + } + +err_out: + mutex_unlock(&data->lock); + + return ret; +} + +static const struct iio_info ams_iaqcore_info = { + .read_raw = ams_iaqcore_read_raw, + .driver_module = THIS_MODULE, +}; + +static int ams_iaqcore_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ams_iaqcore_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + /* so initial reading will complete */ + data->last_update = jiffies - HZ; + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &ams_iaqcore_info, + indio_dev->name = dev_name(&client->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + + indio_dev->channels = ams_iaqcore_channels; + indio_dev->num_channels = ARRAY_SIZE(ams_iaqcore_channels); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id ams_iaqcore_id[] = { + { "ams-iaq-core", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ams_iaqcore_id); + +static const struct of_device_id ams_iaqcore_dt_ids[] = { + { .compatible = "ams,iaq-core" }, + { } +}; +MODULE_DEVICE_TABLE(of, ams_iaqcore_dt_ids); + +static struct i2c_driver ams_iaqcore_driver = { + .driver = { + .name = "ams-iaq-core", + .of_match_table = of_match_ptr(ams_iaqcore_dt_ids), + }, + .probe = ams_iaqcore_probe, + .id_table = ams_iaqcore_id, +}; +module_i2c_driver(ams_iaqcore_driver); + +MODULE_AUTHOR("Matt Ranostay "); +MODULE_DESCRIPTION("AMS iAQ-Core VOC sensors"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c new file mode 100644 index 0000000..62b37cd --- /dev/null +++ b/drivers/iio/chemical/atlas-ph-sensor.c @@ -0,0 +1,509 @@ +/* + * atlas-ph-sensor.c - Support for Atlas Scientific OEM pH-SM sensor + * + * Copyright (C) 2015 Matt Ranostay + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ATLAS_REGMAP_NAME "atlas_ph_regmap" +#define ATLAS_DRV_NAME "atlas_ph" + +#define ATLAS_REG_DEV_TYPE 0x00 +#define ATLAS_REG_DEV_VERSION 0x01 + +#define ATLAS_REG_INT_CONTROL 0x04 +#define ATLAS_REG_INT_CONTROL_EN BIT(3) + +#define ATLAS_REG_PWR_CONTROL 0x06 + +#define ATLAS_REG_CALIB_STATUS 0x0d +#define ATLAS_REG_CALIB_STATUS_MASK 0x07 +#define ATLAS_REG_CALIB_STATUS_LOW BIT(0) +#define ATLAS_REG_CALIB_STATUS_MID BIT(1) +#define ATLAS_REG_CALIB_STATUS_HIGH BIT(2) + +#define ATLAS_REG_TEMP_DATA 0x0e +#define ATLAS_REG_PH_DATA 0x16 + +#define ATLAS_PH_INT_TIME_IN_US 450000 + +struct atlas_data { + struct i2c_client *client; + struct iio_trigger *trig; + struct regmap *regmap; + struct irq_work work; + + __be32 buffer[4]; /* 32-bit pH data + 32-bit pad + 64-bit timestamp */ +}; + +static const struct regmap_range atlas_volatile_ranges[] = { + regmap_reg_range(ATLAS_REG_INT_CONTROL, ATLAS_REG_INT_CONTROL), + regmap_reg_range(ATLAS_REG_PH_DATA, ATLAS_REG_PH_DATA + 4), +}; + +static const struct regmap_access_table atlas_volatile_table = { + .yes_ranges = atlas_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(atlas_volatile_ranges), +}; + +static const struct regmap_config atlas_regmap_config = { + .name = ATLAS_REGMAP_NAME, + + .reg_bits = 8, + .val_bits = 8, + + .volatile_table = &atlas_volatile_table, + .max_register = ATLAS_REG_PH_DATA + 4, + .cache_type = REGCACHE_RBTREE, +}; + +static const struct iio_chan_spec atlas_channels[] = { + { + .type = IIO_PH, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), + { + .type = IIO_TEMP, + .address = ATLAS_REG_TEMP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .output = 1, + .scan_index = -1 + }, +}; + +static int atlas_set_powermode(struct atlas_data *data, int on) +{ + return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on); +} + +static int atlas_set_interrupt(struct atlas_data *data, bool state) +{ + return regmap_update_bits(data->regmap, ATLAS_REG_INT_CONTROL, + ATLAS_REG_INT_CONTROL_EN, + state ? ATLAS_REG_INT_CONTROL_EN : 0); +} + +static int atlas_buffer_postenable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = iio_triggered_buffer_postenable(indio_dev); + if (ret) + return ret; + + ret = pm_runtime_get_sync(&data->client->dev); + if (ret < 0) { + pm_runtime_put_noidle(&data->client->dev); + return ret; + } + + return atlas_set_interrupt(data, true); +} + +static int atlas_buffer_predisable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = iio_triggered_buffer_predisable(indio_dev); + if (ret) + return ret; + + ret = atlas_set_interrupt(data, false); + if (ret) + return ret; + + pm_runtime_mark_last_busy(&data->client->dev); + return pm_runtime_put_autosuspend(&data->client->dev); +} + +static const struct iio_trigger_ops atlas_interrupt_trigger_ops = { + .owner = THIS_MODULE, +}; + +static const struct iio_buffer_setup_ops atlas_buffer_setup_ops = { + .postenable = atlas_buffer_postenable, + .predisable = atlas_buffer_predisable, +}; + +static void atlas_work_handler(struct irq_work *work) +{ + struct atlas_data *data = container_of(work, struct atlas_data, work); + + iio_trigger_poll(data->trig); +} + +static irqreturn_t atlas_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, + (u8 *) &data->buffer, sizeof(data->buffer[0])); + + if (!ret) + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns()); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t atlas_interrupt_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct atlas_data *data = iio_priv(indio_dev); + + irq_work_queue(&data->work); + + return IRQ_HANDLED; +} + +static int atlas_read_ph_measurement(struct atlas_data *data, __be32 *val) +{ + struct device *dev = &data->client->dev; + int suspended = pm_runtime_suspended(dev); + int ret; + + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } + + if (suspended) + usleep_range(ATLAS_PH_INT_TIME_IN_US, + ATLAS_PH_INT_TIME_IN_US + 100000); + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, + (u8 *) val, sizeof(*val)); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static int atlas_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + int ret; + __be32 reg; + + switch (chan->type) { + case IIO_TEMP: + ret = regmap_bulk_read(data->regmap, chan->address, + (u8 *) ®, sizeof(reg)); + break; + case IIO_PH: + mutex_lock(&indio_dev->mlock); + + if (iio_buffer_enabled(indio_dev)) + ret = -EBUSY; + else + ret = atlas_read_ph_measurement(data, ®); + + mutex_unlock(&indio_dev->mlock); + break; + default: + ret = -EINVAL; + } + + if (!ret) { + *val = be32_to_cpu(reg); + ret = IIO_VAL_INT; + } + return ret; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 1; /* 0.01 */ + *val2 = 100; + break; + case IIO_PH: + *val = 1; /* 0.001 */ + *val2 = 1000; + break; + default: + return -EINVAL; + } + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int atlas_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + __be32 reg = cpu_to_be32(val); + + if (val2 != 0 || val < 0 || val > 20000) + return -EINVAL; + + if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_TEMP) + return -EINVAL; + + return regmap_bulk_write(data->regmap, chan->address, + ®, sizeof(reg)); +} + +static const struct iio_info atlas_info = { + .driver_module = THIS_MODULE, + .read_raw = atlas_read_raw, + .write_raw = atlas_write_raw, +}; + +static int atlas_check_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, ATLAS_REG_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_CALIB_STATUS_LOW)) + dev_warn(dev, "device missing low point calibration\n"); + + if (!(val & ATLAS_REG_CALIB_STATUS_MID)) + dev_warn(dev, "device missing mid point calibration\n"); + + if (!(val & ATLAS_REG_CALIB_STATUS_HIGH)) + dev_warn(dev, "device missing high point calibration\n"); + + return 0; +}; + +static int atlas_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atlas_data *data; + struct iio_trigger *trig; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + indio_dev->info = &atlas_info; + indio_dev->name = ATLAS_DRV_NAME; + indio_dev->channels = atlas_channels; + indio_dev->num_channels = ARRAY_SIZE(atlas_channels); + indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE; + indio_dev->dev.parent = &client->dev; + + trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + + if (!trig) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + data->trig = trig; + trig->dev.parent = indio_dev->dev.parent; + trig->ops = &atlas_interrupt_trigger_ops; + iio_trigger_set_drvdata(trig, indio_dev); + + i2c_set_clientdata(client, indio_dev); + + data->regmap = devm_regmap_init_i2c(client, &atlas_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap initialization failed\n"); + return PTR_ERR(data->regmap); + } + + ret = pm_runtime_set_active(&client->dev); + if (ret) + return ret; + + if (client->irq <= 0) { + dev_err(&client->dev, "no valid irq defined\n"); + return -EINVAL; + } + + ret = atlas_check_calibration(data); + if (ret) + return ret; + + ret = iio_trigger_register(trig); + if (ret) { + dev_err(&client->dev, "failed to register trigger\n"); + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &atlas_trigger_handler, &atlas_buffer_setup_ops); + if (ret) { + dev_err(&client->dev, "cannot setup iio trigger\n"); + goto unregister_trigger; + } + + init_irq_work(&data->work, atlas_work_handler); + + /* interrupt pin toggles on new conversion */ + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, atlas_interrupt_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "atlas_irq", + indio_dev); + if (ret) { + dev_err(&client->dev, "request irq (%d) failed\n", client->irq); + goto unregister_buffer; + } + + ret = atlas_set_powermode(data, 1); + if (ret) { + dev_err(&client->dev, "cannot power device on"); + goto unregister_buffer; + } + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, 2500); + pm_runtime_use_autosuspend(&client->dev); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&client->dev, "unable to register device\n"); + goto unregister_pm; + } + + return 0; + +unregister_pm: + pm_runtime_disable(&client->dev); + atlas_set_powermode(data, 0); + +unregister_buffer: + iio_triggered_buffer_cleanup(indio_dev); + +unregister_trigger: + iio_trigger_unregister(data->trig); + + return ret; +} + +static int atlas_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct atlas_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + iio_trigger_unregister(data->trig); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + + return atlas_set_powermode(data, 0); +} + +#ifdef CONFIG_PM +static int atlas_runtime_suspend(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 0); +} + +static int atlas_runtime_resume(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 1); +} +#endif + +static const struct dev_pm_ops atlas_pm_ops = { + SET_RUNTIME_PM_OPS(atlas_runtime_suspend, + atlas_runtime_resume, NULL) +}; + +static const struct i2c_device_id atlas_id[] = { + { "atlas-ph-sm", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, atlas_id); + +static const struct of_device_id atlas_dt_ids[] = { + { .compatible = "atlas,ph-sm" }, + { } +}; +MODULE_DEVICE_TABLE(of, atlas_dt_ids); + +static struct i2c_driver atlas_driver = { + .driver = { + .name = ATLAS_DRV_NAME, + .of_match_table = of_match_ptr(atlas_dt_ids), + .pm = &atlas_pm_ops, + }, + .probe = atlas_probe, + .remove = atlas_remove, + .id_table = atlas_id, +}; +module_i2c_driver(atlas_driver); + +MODULE_AUTHOR("Matt Ranostay "); +MODULE_DESCRIPTION("Atlas Scientific pH-SM sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c index 11e59a5..652649d 100644 --- a/drivers/iio/chemical/vz89x.c +++ b/drivers/iio/chemical/vz89x.c @@ -34,8 +34,9 @@ struct vz89x_data { struct i2c_client *client; struct mutex lock; - unsigned long last_update; + int (*xfer)(struct vz89x_data *data, u8 cmd); + unsigned long last_update; u8 buffer[VZ89X_REG_MEASUREMENT_SIZE]; }; @@ -100,27 +101,60 @@ static int vz89x_measurement_is_valid(struct vz89x_data *data) return !!(data->buffer[VZ89X_REG_MEASUREMENT_SIZE - 1] > 0); } -static int vz89x_get_measurement(struct vz89x_data *data) +static int vz89x_i2c_xfer(struct vz89x_data *data, u8 cmd) { + struct i2c_client *client = data->client; + struct i2c_msg msg[2]; int ret; - int i; + u8 buf[3] = { cmd, 0, 0}; - /* sensor can only be polled once a second max per datasheet */ - if (!time_after(jiffies, data->last_update + HZ)) - return 0; + msg[0].addr = client->addr; + msg[0].flags = client->flags; + msg[0].len = 3; + msg[0].buf = (char *) &buf; + + msg[1].addr = client->addr; + msg[1].flags = client->flags | I2C_M_RD; + msg[1].len = VZ89X_REG_MEASUREMENT_SIZE; + msg[1].buf = (char *) &data->buffer; + + ret = i2c_transfer(client->adapter, msg, 2); - ret = i2c_smbus_write_word_data(data->client, - VZ89X_REG_MEASUREMENT, 0); + return (ret == 2) ? 0 : ret; +} + +static int vz89x_smbus_xfer(struct vz89x_data *data, u8 cmd) +{ + struct i2c_client *client = data->client; + int ret; + int i; + + ret = i2c_smbus_write_word_data(client, cmd, 0); if (ret < 0) return ret; for (i = 0; i < VZ89X_REG_MEASUREMENT_SIZE; i++) { - ret = i2c_smbus_read_byte(data->client); + ret = i2c_smbus_read_byte(client); if (ret < 0) return ret; data->buffer[i] = ret; } + return 0; +} + +static int vz89x_get_measurement(struct vz89x_data *data) +{ + int ret; + + /* sensor can only be polled once a second max per datasheet */ + if (!time_after(jiffies, data->last_update + HZ)) + return 0; + + ret = data->xfer(data, VZ89X_REG_MEASUREMENT); + if (ret < 0) + return ret; + ret = vz89x_measurement_is_valid(data); if (ret) return -EAGAIN; @@ -204,15 +238,19 @@ static int vz89x_probe(struct i2c_client *client, struct iio_dev *indio_dev; struct vz89x_data *data; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BYTE)) - return -ENODEV; - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; - data = iio_priv(indio_dev); + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + data->xfer = vz89x_i2c_xfer; + else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) + data->xfer = vz89x_smbus_xfer; + else + return -EOPNOTSUPP; + i2c_set_clientdata(client, indio_dev); data->client = client; data->last_update = jiffies - HZ; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 25258e2..f5a2d44 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -18,16 +18,15 @@ #include #include - -#define ST_SENSORS_WAI_ADDRESS 0x0f +#include "st_sensors_core.h" static inline u32 st_sensors_get_unaligned_le24(const u8 *p) { return (s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8; } -static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, - u8 reg_addr, u8 mask, u8 data) +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data) { int err; u8 new_data; diff --git b/drivers/iio/common/st_sensors/st_sensors_core.h b/drivers/iio/common/st_sensors/st_sensors_core.h new file mode 100644 index 0000000..cd88098 --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_core.h @@ -0,0 +1,8 @@ +/* + * Local functions in the ST Sensors core + */ +#ifndef __ST_SENSORS_CORE_H +#define __ST_SENSORS_CORE_H +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data); +#endif diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 3e90704..6a8c983 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -14,32 +14,65 @@ #include #include #include - #include - +#include "st_sensors_core.h" int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) { - int err; + int err, irq; struct st_sensor_data *sdata = iio_priv(indio_dev); + unsigned long irq_trig; sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name); if (sdata->trig == NULL) { - err = -ENOMEM; dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n"); - goto iio_trigger_alloc_error; + return -ENOMEM; } - err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), + irq = sdata->get_irq_data_ready(indio_dev); + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + /* + * If the IRQ is triggered on falling edge, we need to mark the + * interrupt as active low, if the hardware supports this. + */ + if (irq_trig == IRQF_TRIGGER_FALLING) { + if (!sdata->sensor_settings->drdy_irq.addr_ihl) { + dev_err(&indio_dev->dev, + "falling edge specified for IRQ but hardware " + "only support rising edge, will request " + "rising edge\n"); + irq_trig = IRQF_TRIGGER_RISING; + } else { + /* Set up INT active low i.e. falling edge */ + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor_settings->drdy_irq.addr_ihl, + sdata->sensor_settings->drdy_irq.mask_ihl, 1); + if (err < 0) + goto iio_trigger_free; + dev_info(&indio_dev->dev, + "interrupts on the falling edge\n"); + } + } else if (irq_trig == IRQF_TRIGGER_RISING) { + dev_info(&indio_dev->dev, + "interrupts on the rising edge\n"); + + } else { + dev_err(&indio_dev->dev, + "unsupported IRQ trigger specified (%lx), only " + "rising and falling edges supported, enforce " + "rising edge\n", irq_trig); + irq_trig = IRQF_TRIGGER_RISING; + } + err = request_threaded_irq(irq, iio_trigger_generic_data_rdy_poll, NULL, - IRQF_TRIGGER_RISING, + irq_trig, sdata->trig->name, sdata->trig); if (err) { dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n"); - goto request_irq_error; + goto iio_trigger_free; } iio_trigger_set_drvdata(sdata->trig, indio_dev); @@ -57,9 +90,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, iio_trigger_register_error: free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig); -request_irq_error: +iio_trigger_free: iio_trigger_free(sdata->trig); -iio_trigger_alloc_error: return err; } EXPORT_SYMBOL(st_sensors_allocate_trigger); diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index e701e28..a995139 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -10,8 +10,10 @@ config AD5064 depends on (SPI_MASTER && I2C!=m) || I2C help Say yes here to build support for Analog Devices AD5024, AD5025, AD5044, - AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, AD5648, AD5666, AD5668, - AD5669R Digital to Analog Converter. + AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, AD5627, AD5627R, + AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, AD5666, + AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616, + LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to Analog Converter. To compile this driver as a module, choose M here: the module will be called ad5064. @@ -111,6 +113,16 @@ config AD5755 To compile this driver as a module, choose M here: the module will be called ad5755. +config AD5761 + tristate "Analog Devices AD5761/61R/21/21R DAC driver" + depends on SPI_MASTER + help + Say yes here to build support for Analog Devices AD5761, AD5761R, AD5721, + AD5721R Digital to Analog Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5761. + config AD5764 tristate "Analog Devices AD5764/64R/44/44R DAC driver" depends on SPI_MASTER @@ -176,11 +188,11 @@ config MAX5821 10 bits DAC. config MCP4725 - tristate "MCP4725 DAC driver" + tristate "MCP4725/6 DAC driver" depends on I2C ---help--- Say Y here if you want to build a driver for the Microchip - MCP 4725 12-bit digital-to-analog converter (DAC) with I2C + MCP 4725/6 12-bit digital-to-analog converter (DAC) with I2C interface. To compile this driver as a module, choose M here: the module @@ -196,4 +208,23 @@ config MCP4922 To compile this driver as a module, choose M here: the module will be called mcp4922. +config STX104 + tristate "Apex Embedded Systems STX104 DAC driver" + depends on ISA + help + Say yes here to build support for the 2-channel DAC on the Apex + Embedded Systems STX104 integrated analog PC/104 card. The base port + addresses for the devices may be configured via the "base" module + parameter array. + +config VF610_DAC + tristate "Vybrid vf610 DAC driver" + depends on OF + depends on HAS_IOMEM + help + Say yes here to support Vybrid board digital-to-analog converter. + + This driver can also be built as a module. If so, the module will + be called vf610_dac. + endmenu diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 63ae056..67b4842 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_AD5504) += ad5504.o obj-$(CONFIG_AD5446) += ad5446.o obj-$(CONFIG_AD5449) += ad5449.o obj-$(CONFIG_AD5755) += ad5755.o +obj-$(CONFIG_AD5761) += ad5761.o obj-$(CONFIG_AD5764) += ad5764.o obj-$(CONFIG_AD5791) += ad5791.o obj-$(CONFIG_AD5686) += ad5686.o @@ -21,3 +22,5 @@ obj-$(CONFIG_MAX517) += max517.o obj-$(CONFIG_MAX5821) += max5821.o obj-$(CONFIG_MCP4725) += mcp4725.o obj-$(CONFIG_MCP4922) += mcp4922.o +obj-$(CONFIG_STX104) += stx104.o +obj-$(CONFIG_VF610_DAC) += vf610_dac.o diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c index 81ca008..6803e4a 100644 --- a/drivers/iio/dac/ad5064.c +++ b/drivers/iio/dac/ad5064.c @@ -1,6 +1,9 @@ /* - * AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, - * AD5648, AD5666, AD5668, AD5669R Digital to analog converters driver + * AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, + * AD5627, AD5627R, AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, + * AD5666, AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616, + * LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to analog converters + * driver * * Copyright 2011 Analog Devices Inc. * @@ -39,6 +42,9 @@ #define AD5064_CMD_RESET 0x7 #define AD5064_CMD_CONFIG 0x8 +#define AD5064_CMD_RESET_V2 0x5 +#define AD5064_CMD_CONFIG_V2 0x7 + #define AD5064_CONFIG_DAISY_CHAIN_ENABLE BIT(1) #define AD5064_CONFIG_INT_VREF_ENABLE BIT(0) @@ -48,12 +54,25 @@ #define AD5064_LDAC_PWRDN_3STATE 0x3 /** + * enum ad5064_regmap_type - Register layout variant + * @AD5064_REGMAP_ADI: Old Analog Devices register map layout + * @AD5064_REGMAP_ADI2: New Analog Devices register map layout + * @AD5064_REGMAP_LTC: LTC register map layout + */ +enum ad5064_regmap_type { + AD5064_REGMAP_ADI, + AD5064_REGMAP_ADI2, + AD5064_REGMAP_LTC, +}; + +/** * struct ad5064_chip_info - chip specific information * @shared_vref: whether the vref supply is shared between channels - * @internal_vref: internal reference voltage. 0 if the chip has no internal - * vref. + * @internal_vref: internal reference voltage. 0 if the chip has no + internal vref. * @channel: channel specification * @num_channels: number of channels + * @regmap_type: register map layout variant */ struct ad5064_chip_info { @@ -61,6 +80,7 @@ struct ad5064_chip_info { unsigned long internal_vref; const struct iio_chan_spec *channels; unsigned int num_channels; + enum ad5064_regmap_type regmap_type; }; struct ad5064_state; @@ -111,18 +131,43 @@ enum ad5064_type { ID_AD5064, ID_AD5064_1, ID_AD5065, + ID_AD5625, + ID_AD5625R_1V25, + ID_AD5625R_2V5, + ID_AD5627, + ID_AD5627R_1V25, + ID_AD5627R_2V5, ID_AD5628_1, ID_AD5628_2, ID_AD5629_1, ID_AD5629_2, + ID_AD5645R_1V25, + ID_AD5645R_2V5, + ID_AD5647R_1V25, + ID_AD5647R_2V5, ID_AD5648_1, ID_AD5648_2, + ID_AD5665, + ID_AD5665R_1V25, + ID_AD5665R_2V5, ID_AD5666_1, ID_AD5666_2, + ID_AD5667, + ID_AD5667R_1V25, + ID_AD5667R_2V5, ID_AD5668_1, ID_AD5668_2, ID_AD5669_1, ID_AD5669_2, + ID_LTC2606, + ID_LTC2607, + ID_LTC2609, + ID_LTC2616, + ID_LTC2617, + ID_LTC2619, + ID_LTC2626, + ID_LTC2627, + ID_LTC2629, }; static int ad5064_write(struct ad5064_state *st, unsigned int cmd, @@ -136,15 +181,27 @@ static int ad5064_write(struct ad5064_state *st, unsigned int cmd, static int ad5064_sync_powerdown_mode(struct ad5064_state *st, const struct iio_chan_spec *chan) { - unsigned int val; + unsigned int val, address; + unsigned int shift; int ret; - val = (0x1 << chan->address); + if (st->chip_info->regmap_type == AD5064_REGMAP_LTC) { + val = 0; + address = chan->address; + } else { + if (st->chip_info->regmap_type == AD5064_REGMAP_ADI2) + shift = 4; + else + shift = 8; + + val = (0x1 << chan->address); + address = 0; - if (st->pwr_down[chan->channel]) - val |= st->pwr_down_mode[chan->channel] << 8; + if (st->pwr_down[chan->channel]) + val |= st->pwr_down_mode[chan->channel] << shift; + } - ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, 0, val, 0); + ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, address, val, 0); return ret; } @@ -155,6 +212,10 @@ static const char * const ad5064_powerdown_modes[] = { "three_state", }; +static const char * const ltc2617_powerdown_modes[] = { + "90kohm_to_gnd", +}; + static int ad5064_get_powerdown_mode(struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { @@ -185,6 +246,13 @@ static const struct iio_enum ad5064_powerdown_mode_enum = { .set = ad5064_set_powerdown_mode, }; +static const struct iio_enum ltc2617_powerdown_mode_enum = { + .items = ltc2617_powerdown_modes, + .num_items = ARRAY_SIZE(ltc2617_powerdown_modes), + .get = ad5064_get_powerdown_mode, + .set = ad5064_set_powerdown_mode, +}; + static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev, uintptr_t private, const struct iio_chan_spec *chan, char *buf) { @@ -295,7 +363,19 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = { { }, }; -#define AD5064_CHANNEL(chan, addr, bits, _shift) { \ +static const struct iio_chan_spec_ext_info ltc2617_ext_info[] = { + { + .name = "powerdown", + .read = ad5064_read_dac_powerdown, + .write = ad5064_write_dac_powerdown, + .shared = IIO_SEPARATE, + }, + IIO_ENUM("powerdown_mode", IIO_SEPARATE, <c2617_powerdown_mode_enum), + IIO_ENUM_AVAILABLE("powerdown_mode", <c2617_powerdown_mode_enum), + { }, +}; + +#define AD5064_CHANNEL(chan, addr, bits, _shift, _ext_info) { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .output = 1, \ @@ -309,145 +389,340 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = { .storagebits = 16, \ .shift = (_shift), \ }, \ - .ext_info = ad5064_ext_info, \ + .ext_info = (_ext_info), \ } -#define DECLARE_AD5064_CHANNELS(name, bits, shift) \ +#define DECLARE_AD5064_CHANNELS(name, bits, shift, ext_info) \ const struct iio_chan_spec name[] = { \ - AD5064_CHANNEL(0, 0, bits, shift), \ - AD5064_CHANNEL(1, 1, bits, shift), \ - AD5064_CHANNEL(2, 2, bits, shift), \ - AD5064_CHANNEL(3, 3, bits, shift), \ - AD5064_CHANNEL(4, 4, bits, shift), \ - AD5064_CHANNEL(5, 5, bits, shift), \ - AD5064_CHANNEL(6, 6, bits, shift), \ - AD5064_CHANNEL(7, 7, bits, shift), \ + AD5064_CHANNEL(0, 0, bits, shift, ext_info), \ + AD5064_CHANNEL(1, 1, bits, shift, ext_info), \ + AD5064_CHANNEL(2, 2, bits, shift, ext_info), \ + AD5064_CHANNEL(3, 3, bits, shift, ext_info), \ + AD5064_CHANNEL(4, 4, bits, shift, ext_info), \ + AD5064_CHANNEL(5, 5, bits, shift, ext_info), \ + AD5064_CHANNEL(6, 6, bits, shift, ext_info), \ + AD5064_CHANNEL(7, 7, bits, shift, ext_info), \ } -#define DECLARE_AD5065_CHANNELS(name, bits, shift) \ +#define DECLARE_AD5065_CHANNELS(name, bits, shift, ext_info) \ const struct iio_chan_spec name[] = { \ - AD5064_CHANNEL(0, 0, bits, shift), \ - AD5064_CHANNEL(1, 3, bits, shift), \ + AD5064_CHANNEL(0, 0, bits, shift, ext_info), \ + AD5064_CHANNEL(1, 3, bits, shift, ext_info), \ } -static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8); -static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6); -static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4); +static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4, ad5064_ext_info); + +static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8, ad5064_ext_info); +static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6, ad5064_ext_info); +static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4, ad5064_ext_info); -static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8); -static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6); -static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4); +static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5645_channels, 14, 2, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0, ad5064_ext_info); -static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4); -static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0); +static DECLARE_AD5064_CHANNELS(ltc2607_channels, 16, 0, ltc2617_ext_info); +static DECLARE_AD5064_CHANNELS(ltc2617_channels, 14, 2, ltc2617_ext_info); +static DECLARE_AD5064_CHANNELS(ltc2627_channels, 12, 4, ltc2617_ext_info); static const struct ad5064_chip_info ad5064_chip_info_tbl[] = { [ID_AD5024] = { .shared_vref = false, .channels = ad5024_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5025] = { .shared_vref = false, .channels = ad5025_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5044] = { .shared_vref = false, .channels = ad5044_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5045] = { .shared_vref = false, .channels = ad5045_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5064] = { .shared_vref = false, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5064_1] = { .shared_vref = true, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5065] = { .shared_vref = false, .channels = ad5065_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5625] = { + .shared_vref = true, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5625R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5625R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627] = { + .shared_vref = true, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5628_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5024_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5628_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5024_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5629_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5629_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5629_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5629_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5645R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5645_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5645R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5645_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5647R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5645_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5647R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5645_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5648_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5044_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5648_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5044_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5665] = { + .shared_vref = true, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5665R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5665R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5666_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5666_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5667] = { + .shared_vref = true, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5667R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5667R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5668_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5064_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5668_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5064_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5669_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5669_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5669_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5669_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_LTC2606] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2607] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2609] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2616] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2617] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2619] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2626] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2627] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2629] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, }, }; @@ -469,6 +744,22 @@ static const char * const ad5064_vref_name(struct ad5064_state *st, return st->chip_info->shared_vref ? "vref" : ad5064_vref_names[vref]; } +static int ad5064_set_config(struct ad5064_state *st, unsigned int val) +{ + unsigned int cmd; + + switch (st->chip_info->regmap_type) { + case AD5064_REGMAP_ADI2: + cmd = AD5064_CMD_CONFIG_V2; + break; + default: + cmd = AD5064_CMD_CONFIG; + break; + } + + return ad5064_write(st, cmd, 0, val, 0); +} + static int ad5064_probe(struct device *dev, enum ad5064_type type, const char *name, ad5064_write_func write) { @@ -498,8 +789,7 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type, if (!st->chip_info->internal_vref) return ret; st->use_internal_vref = true; - ret = ad5064_write(st, AD5064_CMD_CONFIG, 0, - AD5064_CONFIG_INT_VREF_ENABLE, 0); + ret = ad5064_set_config(st, AD5064_CONFIG_INT_VREF_ENABLE); if (ret) { dev_err(dev, "Failed to enable internal vref: %d\n", ret); @@ -628,9 +918,19 @@ static int ad5064_i2c_write(struct ad5064_state *st, unsigned int cmd, unsigned int addr, unsigned int val) { struct i2c_client *i2c = to_i2c_client(st->dev); + unsigned int cmd_shift; int ret; - st->data.i2c[0] = (cmd << 4) | addr; + switch (st->chip_info->regmap_type) { + case AD5064_REGMAP_ADI2: + cmd_shift = 3; + break; + default: + cmd_shift = 4; + break; + } + + st->data.i2c[0] = (cmd << cmd_shift) | addr; put_unaligned_be16(val, &st->data.i2c[1]); ret = i2c_master_send(i2c, st->data.i2c, 3); @@ -653,12 +953,35 @@ static int ad5064_i2c_remove(struct i2c_client *i2c) } static const struct i2c_device_id ad5064_i2c_ids[] = { + {"ad5625", ID_AD5625 }, + {"ad5625r-1v25", ID_AD5625R_1V25 }, + {"ad5625r-2v5", ID_AD5625R_2V5 }, + {"ad5627", ID_AD5627 }, + {"ad5627r-1v25", ID_AD5627R_1V25 }, + {"ad5627r-2v5", ID_AD5627R_2V5 }, {"ad5629-1", ID_AD5629_1}, {"ad5629-2", ID_AD5629_2}, {"ad5629-3", ID_AD5629_2}, /* similar enough to ad5629-2 */ + {"ad5645r-1v25", ID_AD5645R_1V25 }, + {"ad5645r-2v5", ID_AD5645R_2V5 }, + {"ad5665", ID_AD5665 }, + {"ad5665r-1v25", ID_AD5665R_1V25 }, + {"ad5665r-2v5", ID_AD5665R_2V5 }, + {"ad5667", ID_AD5667 }, + {"ad5667r-1v25", ID_AD5667R_1V25 }, + {"ad5667r-2v5", ID_AD5667R_2V5 }, {"ad5669-1", ID_AD5669_1}, {"ad5669-2", ID_AD5669_2}, {"ad5669-3", ID_AD5669_2}, /* similar enough to ad5669-2 */ + {"ltc2606", ID_LTC2606}, + {"ltc2607", ID_LTC2607}, + {"ltc2609", ID_LTC2609}, + {"ltc2616", ID_LTC2616}, + {"ltc2617", ID_LTC2617}, + {"ltc2619", ID_LTC2619}, + {"ltc2626", ID_LTC2626}, + {"ltc2627", ID_LTC2627}, + {"ltc2629", ID_LTC2629}, {} }; MODULE_DEVICE_TABLE(i2c, ad5064_i2c_ids); diff --git b/drivers/iio/dac/ad5761.c b/drivers/iio/dac/ad5761.c new file mode 100644 index 0000000..d6510d6 --- /dev/null +++ b/drivers/iio/dac/ad5761.c @@ -0,0 +1,430 @@ +/* + * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter + * + * Copyright 2016 Qtechnology A/S + * 2016 Ricardo Ribalda + * + * Licensed under the GPL-2. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define AD5761_ADDR(addr) ((addr & 0xf) << 16) +#define AD5761_ADDR_NOOP 0x0 +#define AD5761_ADDR_DAC_WRITE 0x3 +#define AD5761_ADDR_CTRL_WRITE_REG 0x4 +#define AD5761_ADDR_SW_DATA_RESET 0x7 +#define AD5761_ADDR_DAC_READ 0xb +#define AD5761_ADDR_CTRL_READ_REG 0xc +#define AD5761_ADDR_SW_FULL_RESET 0xf + +#define AD5761_CTRL_USE_INTVREF BIT(5) +#define AD5761_CTRL_ETS BIT(6) + +/** + * struct ad5761_chip_info - chip specific information + * @int_vref: Value of the internal reference voltage in mV - 0 if external + * reference voltage is used + * @channel: channel specification +*/ + +struct ad5761_chip_info { + unsigned long int_vref; + const struct iio_chan_spec channel; +}; + +struct ad5761_range_params { + int m; + int c; +}; + +enum ad5761_supported_device_ids { + ID_AD5721, + ID_AD5721R, + ID_AD5761, + ID_AD5761R, +}; + +/** + * struct ad5761_state - driver instance specific data + * @spi: spi_device + * @vref_reg: reference voltage regulator + * @use_intref: true when the internal voltage reference is used + * @vref: actual voltage reference in mVolts + * @range: output range mode used + * @data: cache aligned spi buffer + */ +struct ad5761_state { + struct spi_device *spi; + struct regulator *vref_reg; + + bool use_intref; + int vref; + enum ad5761_voltage_range range; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + union { + __be32 d32; + u8 d8[4]; + } data[3] ____cacheline_aligned; +}; + +static const struct ad5761_range_params ad5761_range_params[] = { + [AD5761_VOLTAGE_RANGE_M10V_10V] = { + .m = 80, + .c = 40, + }, + [AD5761_VOLTAGE_RANGE_0V_10V] = { + .m = 40, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_M5V_5V] = { + .m = 40, + .c = 20, + }, + [AD5761_VOLTAGE_RANGE_0V_5V] = { + .m = 20, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_M2V5_7V5] = { + .m = 40, + .c = 10, + }, + [AD5761_VOLTAGE_RANGE_M3V_3V] = { + .m = 24, + .c = 12, + }, + [AD5761_VOLTAGE_RANGE_0V_16V] = { + .m = 64, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_0V_20V] = { + .m = 80, + .c = 0, + }, +}; + +static int _ad5761_spi_write(struct ad5761_state *st, u8 addr, u16 val) +{ + st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr) | val); + + return spi_write(st->spi, &st->data[0].d8[1], 3); +} + +static int ad5761_spi_write(struct iio_dev *indio_dev, u8 addr, u16 val) +{ + struct ad5761_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = _ad5761_spi_write(st, addr, val); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int _ad5761_spi_read(struct ad5761_state *st, u8 addr, u16 *val) +{ + int ret; + struct spi_transfer xfers[] = { + { + .tx_buf = &st->data[0].d8[1], + .bits_per_word = 8, + .len = 3, + .cs_change = true, + }, { + .tx_buf = &st->data[1].d8[1], + .rx_buf = &st->data[2].d8[1], + .bits_per_word = 8, + .len = 3, + }, + }; + + st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr)); + st->data[1].d32 = cpu_to_be32(AD5761_ADDR(AD5761_ADDR_NOOP)); + + ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers)); + + *val = be32_to_cpu(st->data[2].d32); + + return ret; +} + +static int ad5761_spi_read(struct iio_dev *indio_dev, u8 addr, u16 *val) +{ + struct ad5761_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = _ad5761_spi_read(st, addr, val); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int ad5761_spi_set_range(struct ad5761_state *st, + enum ad5761_voltage_range range) +{ + u16 aux; + int ret; + + aux = (range & 0x7) | AD5761_CTRL_ETS; + + if (st->use_intref) + aux |= AD5761_CTRL_USE_INTVREF; + + ret = _ad5761_spi_write(st, AD5761_ADDR_SW_FULL_RESET, 0); + if (ret) + return ret; + + ret = _ad5761_spi_write(st, AD5761_ADDR_CTRL_WRITE_REG, aux); + if (ret) + return ret; + + st->range = range; + + return 0; +} + +static int ad5761_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct ad5761_state *st; + int ret; + u16 aux; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = ad5761_spi_read(indio_dev, AD5761_ADDR_DAC_READ, &aux); + if (ret) + return ret; + *val = aux >> chan->scan_type.shift; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + st = iio_priv(indio_dev); + *val = st->vref * ad5761_range_params[st->range].m; + *val /= 10; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_OFFSET: + st = iio_priv(indio_dev); + *val = -(1 << chan->scan_type.realbits); + *val *= ad5761_range_params[st->range].c; + *val /= ad5761_range_params[st->range].m; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ad5761_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + u16 aux; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if (val2 || (val << chan->scan_type.shift) > 0xffff || val < 0) + return -EINVAL; + + aux = val << chan->scan_type.shift; + + return ad5761_spi_write(indio_dev, AD5761_ADDR_DAC_WRITE, aux); +} + +static const struct iio_info ad5761_info = { + .read_raw = &ad5761_read_raw, + .write_raw = &ad5761_write_raw, + .driver_module = THIS_MODULE, +}; + +#define AD5761_CHAN(_bits) { \ + .type = IIO_VOLTAGE, \ + .output = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (_bits), \ + .storagebits = 16, \ + .shift = 16 - (_bits), \ + }, \ +} + +static const struct ad5761_chip_info ad5761_chip_infos[] = { + [ID_AD5721] = { + .int_vref = 0, + .channel = AD5761_CHAN(12), + }, + [ID_AD5721R] = { + .int_vref = 2500, + .channel = AD5761_CHAN(12), + }, + [ID_AD5761] = { + .int_vref = 0, + .channel = AD5761_CHAN(16), + }, + [ID_AD5761R] = { + .int_vref = 2500, + .channel = AD5761_CHAN(16), + }, +}; + +static int ad5761_get_vref(struct ad5761_state *st, + const struct ad5761_chip_info *chip_info) +{ + int ret; + + st->vref_reg = devm_regulator_get_optional(&st->spi->dev, "vref"); + if (PTR_ERR(st->vref_reg) == -ENODEV) { + /* Use Internal regulator */ + if (!chip_info->int_vref) { + dev_err(&st->spi->dev, + "Voltage reference not found\n"); + return -EIO; + } + + st->use_intref = true; + st->vref = chip_info->int_vref; + return 0; + } + + if (IS_ERR(st->vref_reg)) { + dev_err(&st->spi->dev, + "Error getting voltage reference regulator\n"); + return PTR_ERR(st->vref_reg); + } + + ret = regulator_enable(st->vref_reg); + if (ret) { + dev_err(&st->spi->dev, + "Failed to enable voltage reference\n"); + return ret; + } + + ret = regulator_get_voltage(st->vref_reg); + if (ret < 0) { + dev_err(&st->spi->dev, + "Failed to get voltage reference value\n"); + goto disable_regulator_vref; + } + + if (ret < 2000000 || ret > 3000000) { + dev_warn(&st->spi->dev, + "Invalid external voltage ref. value %d uV\n", ret); + ret = -EIO; + goto disable_regulator_vref; + } + + st->vref = ret / 1000; + st->use_intref = false; + + return 0; + +disable_regulator_vref: + regulator_disable(st->vref_reg); + st->vref_reg = NULL; + return ret; +} + +static int ad5761_probe(struct spi_device *spi) +{ + struct iio_dev *iio_dev; + struct ad5761_state *st; + int ret; + const struct ad5761_chip_info *chip_info = + &ad5761_chip_infos[spi_get_device_id(spi)->driver_data]; + enum ad5761_voltage_range voltage_range = AD5761_VOLTAGE_RANGE_0V_5V; + struct ad5761_platform_data *pdata = dev_get_platdata(&spi->dev); + + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!iio_dev) + return -ENOMEM; + + st = iio_priv(iio_dev); + + st->spi = spi; + spi_set_drvdata(spi, iio_dev); + + ret = ad5761_get_vref(st, chip_info); + if (ret) + return ret; + + if (pdata) + voltage_range = pdata->voltage_range; + + ret = ad5761_spi_set_range(st, voltage_range); + if (ret) + goto disable_regulator_err; + + iio_dev->dev.parent = &spi->dev; + iio_dev->info = &ad5761_info; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = &chip_info->channel; + iio_dev->num_channels = 1; + iio_dev->name = spi_get_device_id(st->spi)->name; + ret = iio_device_register(iio_dev); + if (ret) + goto disable_regulator_err; + + return 0; + +disable_regulator_err: + if (!IS_ERR_OR_NULL(st->vref_reg)) + regulator_disable(st->vref_reg); + + return ret; +} + +static int ad5761_remove(struct spi_device *spi) +{ + struct iio_dev *iio_dev = spi_get_drvdata(spi); + struct ad5761_state *st = iio_priv(iio_dev); + + iio_device_unregister(iio_dev); + + if (!IS_ERR_OR_NULL(st->vref_reg)) + regulator_disable(st->vref_reg); + + return 0; +} + +static const struct spi_device_id ad5761_id[] = { + {"ad5721", ID_AD5721}, + {"ad5721r", ID_AD5721R}, + {"ad5761", ID_AD5761}, + {"ad5761r", ID_AD5761R}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad5761_id); + +static struct spi_driver ad5761_driver = { + .driver = { + .name = "ad5761", + }, + .probe = ad5761_probe, + .remove = ad5761_remove, + .id_table = ad5761_id, +}; +module_spi_driver(ad5761_driver); + +MODULE_AUTHOR("Ricardo Ribalda "); +MODULE_DESCRIPTION("Analog Devices AD5721, AD5721R, AD5761, AD5761R driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c index b4dde83..cca935c 100644 --- a/drivers/iio/dac/mcp4725.c +++ b/drivers/iio/dac/mcp4725.c @@ -1,5 +1,5 @@ /* - * mcp4725.c - Support for Microchip MCP4725 + * mcp4725.c - Support for Microchip MCP4725/6 * * Copyright (C) 2012 Peter Meerwald * @@ -134,6 +134,12 @@ static const char * const mcp4725_powerdown_modes[] = { "500kohm_to_gnd" }; +static const char * const mcp4726_powerdown_modes[] = { + "1kohm_to_gnd", + "125kohm_to_gnd", + "640kohm_to_gnd" +}; + static int mcp4725_get_powerdown_mode(struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { @@ -182,11 +188,24 @@ static ssize_t mcp4725_write_powerdown(struct iio_dev *indio_dev, return len; } -static const struct iio_enum mcp4725_powerdown_mode_enum = { - .items = mcp4725_powerdown_modes, - .num_items = ARRAY_SIZE(mcp4725_powerdown_modes), - .get = mcp4725_get_powerdown_mode, - .set = mcp4725_set_powerdown_mode, +enum { + MCP4725, + MCP4726, +}; + +static const struct iio_enum mcp472x_powerdown_mode_enum[] = { + [MCP4725] = { + .items = mcp4725_powerdown_modes, + .num_items = ARRAY_SIZE(mcp4725_powerdown_modes), + .get = mcp4725_get_powerdown_mode, + .set = mcp4725_set_powerdown_mode, + }, + [MCP4726] = { + .items = mcp4726_powerdown_modes, + .num_items = ARRAY_SIZE(mcp4726_powerdown_modes), + .get = mcp4725_get_powerdown_mode, + .set = mcp4725_set_powerdown_mode, + }, }; static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = { @@ -196,19 +215,46 @@ static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = { .write = mcp4725_write_powerdown, .shared = IIO_SEPARATE, }, - IIO_ENUM("powerdown_mode", IIO_SEPARATE, &mcp4725_powerdown_mode_enum), - IIO_ENUM_AVAILABLE("powerdown_mode", &mcp4725_powerdown_mode_enum), + IIO_ENUM("powerdown_mode", IIO_SEPARATE, + &mcp472x_powerdown_mode_enum[MCP4725]), + IIO_ENUM_AVAILABLE("powerdown_mode", + &mcp472x_powerdown_mode_enum[MCP4725]), + { }, +}; + +static const struct iio_chan_spec_ext_info mcp4726_ext_info[] = { + { + .name = "powerdown", + .read = mcp4725_read_powerdown, + .write = mcp4725_write_powerdown, + .shared = IIO_SEPARATE, + }, + IIO_ENUM("powerdown_mode", IIO_SEPARATE, + &mcp472x_powerdown_mode_enum[MCP4726]), + IIO_ENUM_AVAILABLE("powerdown_mode", + &mcp472x_powerdown_mode_enum[MCP4726]), { }, }; -static const struct iio_chan_spec mcp4725_channel = { - .type = IIO_VOLTAGE, - .indexed = 1, - .output = 1, - .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), - .ext_info = mcp4725_ext_info, +static const struct iio_chan_spec mcp472x_channel[] = { + [MCP4725] = { + .type = IIO_VOLTAGE, + .indexed = 1, + .output = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .ext_info = mcp4725_ext_info, + }, + [MCP4726] = { + .type = IIO_VOLTAGE, + .indexed = 1, + .output = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .ext_info = mcp4726_ext_info, + }, }; static int mcp4725_set_value(struct iio_dev *indio_dev, int val) @@ -302,7 +348,7 @@ static int mcp4725_probe(struct i2c_client *client, indio_dev->dev.parent = &client->dev; indio_dev->name = id->name; indio_dev->info = &mcp4725_info; - indio_dev->channels = &mcp4725_channel; + indio_dev->channels = &mcp472x_channel[id->driver_data]; indio_dev->num_channels = 1; indio_dev->modes = INDIO_DIRECT_MODE; @@ -316,7 +362,7 @@ static int mcp4725_probe(struct i2c_client *client, } pd = (inbuf[0] >> 1) & 0x3; data->powerdown = pd > 0 ? true : false; - data->powerdown_mode = pd ? pd-1 : 2; /* 500kohm_to_gnd */ + data->powerdown_mode = pd ? pd - 1 : 2; /* largest register to gnd */ data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4); return iio_device_register(indio_dev); @@ -329,7 +375,8 @@ static int mcp4725_remove(struct i2c_client *client) } static const struct i2c_device_id mcp4725_id[] = { - { "mcp4725", 0 }, + { "mcp4725", MCP4725 }, + { "mcp4726", MCP4726 }, { } }; MODULE_DEVICE_TABLE(i2c, mcp4725_id); @@ -346,5 +393,5 @@ static struct i2c_driver mcp4725_driver = { module_i2c_driver(mcp4725_driver); MODULE_AUTHOR("Peter Meerwald "); -MODULE_DESCRIPTION("MCP4725 12-bit DAC"); +MODULE_DESCRIPTION("MCP4725/6 12-bit DAC"); MODULE_LICENSE("GPL"); diff --git b/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c new file mode 100644 index 0000000..174f4b7 --- /dev/null +++ b/drivers/iio/dac/stx104.c @@ -0,0 +1,152 @@ +/* + * DAC driver for the Apex Embedded Systems STX104 + * Copyright (C) 2016 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STX104_NUM_CHAN 2 + +#define STX104_CHAN(chan) { \ + .type = IIO_VOLTAGE, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .indexed = 1, \ + .output = 1 \ +} + +#define STX104_EXTENT 16 +/** + * The highest base address possible for an ISA device is 0x3FF; this results in + * 1024 possible base addresses. Dividing the number of possible base addresses + * by the address extent taken by each device results in the maximum number of + * devices on a system. + */ +#define MAX_NUM_STX104 (1024 / STX104_EXTENT) + +static unsigned base[MAX_NUM_STX104]; +static unsigned num_stx104; +module_param_array(base, uint, &num_stx104, 0); +MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); + +/** + * struct stx104_iio - IIO device private data structure + * @chan_out_states: channels' output states + * @base: base port address of the IIO device + */ +struct stx104_iio { + unsigned chan_out_states[STX104_NUM_CHAN]; + unsigned base; +}; + +static int stx104_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + *val = priv->chan_out_states[chan->channel]; + + return IIO_VAL_INT; +} + +static int stx104_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + const unsigned chan_addr_offset = 2 * chan->channel; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + priv->chan_out_states[chan->channel] = val; + outw(val, priv->base + 4 + chan_addr_offset); + + return 0; +} + +static const struct iio_info stx104_info = { + .driver_module = THIS_MODULE, + .read_raw = stx104_read_raw, + .write_raw = stx104_write_raw +}; + +static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = { + STX104_CHAN(0), + STX104_CHAN(1) +}; + +static int stx104_probe(struct device *dev, unsigned int id) +{ + struct iio_dev *indio_dev; + struct stx104_iio *priv; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], STX104_EXTENT, + dev_name(dev))) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + STX104_EXTENT); + return -EBUSY; + } + + indio_dev->info = &stx104_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = stx104_channels; + indio_dev->num_channels = STX104_NUM_CHAN; + indio_dev->name = dev_name(dev); + + priv = iio_priv(indio_dev); + priv->base = base[id]; + + /* initialize DAC output to 0V */ + outw(0, base[id] + 4); + outw(0, base[id] + 6); + + return devm_iio_device_register(dev, indio_dev); +} + +static struct isa_driver stx104_driver = { + .probe = stx104_probe, + .driver = { + .name = "stx104" + } +}; + +static void __exit stx104_exit(void) +{ + isa_unregister_driver(&stx104_driver); +} + +static int __init stx104_init(void) +{ + return isa_register_driver(&stx104_driver, num_stx104); +} + +module_init(stx104_init); +module_exit(stx104_exit); + +MODULE_AUTHOR("William Breathitt Gray "); +MODULE_DESCRIPTION("Apex Embedded Systems STX104 DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git b/drivers/iio/dac/vf610_dac.c b/drivers/iio/dac/vf610_dac.c new file mode 100644 index 0000000..c4ec777 --- /dev/null +++ b/drivers/iio/dac/vf610_dac.c @@ -0,0 +1,298 @@ +/* + * Freescale Vybrid vf610 DAC driver + * + * Copyright 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define VF610_DACx_STATCTRL 0x20 + +#define VF610_DAC_DACEN BIT(15) +#define VF610_DAC_DACRFS BIT(14) +#define VF610_DAC_LPEN BIT(11) + +#define VF610_DAC_DAT0(x) ((x) & 0xFFF) + +enum vf610_conversion_mode_sel { + VF610_DAC_CONV_HIGH_POWER, + VF610_DAC_CONV_LOW_POWER, +}; + +struct vf610_dac { + struct clk *clk; + struct device *dev; + enum vf610_conversion_mode_sel conv_mode; + void __iomem *regs; +}; + +static void vf610_dac_init(struct vf610_dac *info) +{ + int val; + + info->conv_mode = VF610_DAC_CONV_LOW_POWER; + val = VF610_DAC_DACEN | VF610_DAC_DACRFS | + VF610_DAC_LPEN; + writel(val, info->regs + VF610_DACx_STATCTRL); +} + +static void vf610_dac_exit(struct vf610_dac *info) +{ + int val; + + val = readl(info->regs + VF610_DACx_STATCTRL); + val &= ~VF610_DAC_DACEN; + writel(val, info->regs + VF610_DACx_STATCTRL); +} + +static int vf610_set_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct vf610_dac *info = iio_priv(indio_dev); + int val; + + mutex_lock(&indio_dev->mlock); + info->conv_mode = mode; + val = readl(info->regs + VF610_DACx_STATCTRL); + if (mode) + val |= VF610_DAC_LPEN; + else + val &= ~VF610_DAC_LPEN; + writel(val, info->regs + VF610_DACx_STATCTRL); + mutex_unlock(&indio_dev->mlock); + + return 0; +} + +static int vf610_get_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + return info->conv_mode; +} + +static const char * const vf610_conv_modes[] = { "high-power", "low-power" }; + +static const struct iio_enum vf610_conversion_mode = { + .items = vf610_conv_modes, + .num_items = ARRAY_SIZE(vf610_conv_modes), + .get = vf610_get_conversion_mode, + .set = vf610_set_conversion_mode, +}; + +static const struct iio_chan_spec_ext_info vf610_ext_info[] = { + IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, + &vf610_conversion_mode), + {}, +}; + +#define VF610_DAC_CHAN(_chan_type) { \ + .type = (_chan_type), \ + .output = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = vf610_ext_info, \ +} + +static const struct iio_chan_spec vf610_dac_iio_channels[] = { + VF610_DAC_CHAN(IIO_VOLTAGE), +}; + +static int vf610_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + *val = VF610_DAC_DAT0(readl(info->regs)); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* + * DACRFS is always 1 for valid reference and typical + * reference voltage as per Vybrid datasheet is 3.3V + * from section 9.1.2.1 of Vybrid datasheet + */ + *val = 3300 /* mV */; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +static int vf610_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, + long mask) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + writel(VF610_DAC_DAT0(val), info->regs); + mutex_unlock(&indio_dev->mlock); + return 0; + + default: + return -EINVAL; + } +} + +static const struct iio_info vf610_dac_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = &vf610_read_raw, + .write_raw = &vf610_write_raw, +}; + +static const struct of_device_id vf610_dac_match[] = { + { .compatible = "fsl,vf610-dac", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, vf610_dac_match); + +static int vf610_dac_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct vf610_dac *info; + struct resource *mem; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct vf610_dac)); + if (!indio_dev) { + dev_err(&pdev->dev, "Failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + info->dev = &pdev->dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + info->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + info->clk = devm_clk_get(&pdev->dev, "dac"); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "Failed getting clock, err = %ld\n", + PTR_ERR(info->clk)); + return PTR_ERR(info->clk); + } + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->dev.of_node = pdev->dev.of_node; + indio_dev->info = &vf610_dac_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = vf610_dac_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(vf