diff --git a/.gitignore b/.gitignore index 4ad4a98..5bc7062 100644 --- a/.gitignore +++ b/.gitignore @@ -106,3 +106,7 @@ all.config # Kdevelop4 *.kdev4 + +# dtb objects +*.dtb +*.dtbo diff --git a/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr new file mode 100644 index 0000000..e2df613 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr @@ -0,0 +1,63 @@ +What: /sys/devices/platform/bone_capemgr/slots +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: + READ: + Describe the state of all the slots of the beaglebone capemgr. + Each line of the output describes a slot: + The slot format is as following: + : [P-][F-][O-][l-][L-][D-] \ + ,, + , + + Where the flags are: + P: Slot has been probed + F: Slot has failed probing (i.e. no EEPROM detected) + O: Slot has been overridden by the user + l: Slot is current loading + L: Slot has completed loading and is ready + D: Slot has been disabled + + Example: + 0: P---L- -1 BeagleBone RS232 CAPE,00A1,Beagleboardtoys,BB-BONE-SERL-03 + 1: PF---- -1 + 2: PF---- -1 + 3: PF---- -1 + + WRITE: + Writing a string of the form [:version] issues a request to + load a firmware blob containing an overlay. The name of the firmware blob + is -[version|00A0].dtbo. This act is defined as a slot override. + + Writing a negative slot id removes the slot if it was an overridden one, or + unloads a slot that was probed. + +What: /sys/devices/platform/bone_capemgr/baseboard/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed base board EEPROM field; one of: + board-name - board-name as stored in cape EEPROM + dc-supplied - whether the cape draws or supplies DC + eeprom-format-revision - EEPROM format rev, only 00A0 supported + header - header; should be 'aa 55 33 ee' + manufacturer - manufacturer string + part-number - part-number of the cape + serial-number - serial number of the cape + version - version of the cape, i.e. 00A0 + number-of-pins - displayed but ignored + pin-usage - displayed but ignored + sys-5v - displayed but ignored + vdd-3v3exp - displayed but ignored + vdd-5v - displayed but ignored +What: /sys/devices/platform/bone_capemgr/slot-/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed cape's EEPROM field; the field is one of: + board-name - baseboard name i.e. A335BNLT + header - header; should be 'aa 55 33 ee' + revision - baseboard revision + serial-number - baseboard serial number + config-option - displayed but ignored diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid deleted file mode 100644 index ffb9536..0000000 --- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid +++ /dev/null @@ -1,22 +0,0 @@ -What: /sys/devices/*//eeprom -Date: August 2013 -Contact: Oliver Schinagl -Description: read-only access to the SID (Security-ID) on current - A-series SoC's from Allwinner. Currently supports A10, A10s, A13 - and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes, - whereas the newer A20 SoC exposes 512 bytes split into sections. - Besides the 16 bytes of SID, there's also an SJTAG area, - HDMI-HDCP key and some custom keys. Below a quick overview, for - details see the user manual: - 0x000 128 bit root-key (sun[457]i) - 0x010 128 bit boot-key (sun7i) - 0x020 64 bit security-jtag-key (sun7i) - 0x028 16 bit key configuration (sun7i) - 0x02b 16 bit custom-vendor-key (sun7i) - 0x02c 320 bit low general key (sun7i) - 0x040 32 bit read-control access (sun7i) - 0x064 224 bit low general key (sun7i) - 0x080 2304 bit HDCP-key (sun7i) - 0x1a0 768 bit high general key (sun7i) -Users: any user space application which wants to read the SID on - Allwinner's A-series of CPU's. diff --git a/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays new file mode 100644 index 0000000..9ed6d64 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays @@ -0,0 +1,34 @@ +What: /sys/firmware/devicetree/overlays/ +Date: March 2015 +Contact: Pantelis Antoniou +Description: + This directory contains the applied device tree overlays of + the running system, as directories of the overlay id. + + enable: The master enable switch, by default is 1, and when + set to 0 it cannot be re-enabled for security reasons. + +What: /sys/firmware/devicetree/overlays/ +Date: March 2015 +Contact: Pantelis Antoniou +Description: + Each directory represents an applied overlay, containing + the following attribute files. + + The discussion about this switch takes place in: + http://comments.gmane.org/gmane.linux.drivers.devicetree/101871 + + Kees Cook: + "Coming from the perspective of drawing a bright line between + kernel and the root user (which tends to start with disabling + kernel module loading), I would say that there at least needs + to be a high-level one-way "off" switch for the interface so + that systems that have this interface can choose to turn it off + during initial boot, etc." + + targets: A file containing the list of targets of each overlay + with each line containing a target. + + can_remove: The attribute set to 1 means that the overlay can + be removed, while 0 means that the overlay is being + overlapped therefore removal is prohibited. diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 4f6a82c..619f13a 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -23,6 +23,8 @@ Optional properties: during suspend. - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init +- ti,deassert-hard-reset: list of hwmod and hardware reset line name pairs + (ascii strings) to be deasserted upon device instantiation. Example: diff --git a/Documentation/devicetree/bindings/hwlock/hwlock.txt b/Documentation/devicetree/bindings/hwlock/hwlock.txt new file mode 100644 index 0000000..085d1f5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/hwlock.txt @@ -0,0 +1,59 @@ +Generic hwlock bindings +======================= + +Generic bindings that are common to all the hwlock platform specific driver +implementations. + +Please also look through the individual platform specific hwlock binding +documentations for identifying any additional properties specific to that +platform. + +hwlock providers: +================= + +Required properties: +- #hwlock-cells: Specifies the number of cells needed to represent a + specific lock. + +hwlock users: +============= + +Consumers that require specific hwlock(s) should specify them using the +property "hwlocks", and an optional "hwlock-names" property. + +Required properties: +- hwlocks: List of phandle to a hwlock provider node and an + associated hwlock args specifier as indicated by + #hwlock-cells. The list can have just a single hwlock + or multiple hwlocks, with each hwlock represented by + a phandle and a corresponding args specifier. + +Optional properties: +- hwlock-names: List of hwlock name strings defined in the same order + as the hwlocks, with one name per hwlock. Consumers can + use the hwlock-names to match and get a specific hwlock. + + +1. Example of a node using a single specific hwlock: + +The following example has a node requesting a hwlock in the bank defined by +the node hwlock1. hwlock1 is a hwlock provider with an argument specifier +of length 1. + + node { + ... + hwlocks = <&hwlock1 2>; + ... + }; + +2. Example of a node using multiple specific hwlocks: + +The following example has a node requesting two hwlocks, a hwlock within +the hwlock device node 'hwlock1' with #hwlock-cells value of 1, and another +hwlock within the hwlock device node 'hwlock2' with #hwlock-cells value of 2. + + node { + ... + hwlocks = <&hwlock1 2>, <&hwlock2 0 3>; + ... + }; diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt new file mode 100644 index 0000000..2c9804f --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt @@ -0,0 +1,26 @@ +OMAP4+ HwSpinlock Driver +======================== + +Required properties: +- compatible: Should be "ti,omap4-hwspinlock" for + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs +- reg: Contains the hwspinlock module register address space + (base address and length) +- ti,hwmods: Name of the hwmod associated with the hwspinlock device +- #hwlock-cells: Should be 1. The OMAP hwspinlock users will use a + 0-indexed relative hwlock number as the argument + specifier value for requesting a specific hwspinlock + within a hwspinlock bank. + +Please look at the generic hwlock binding for usage information for consumers, +"Documentation/devicetree/bindings/hwlock/hwlock.txt" + +Example: + +/* OMAP4 */ +hwspinlock: spinlock@4a0f6000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x4a0f6000 0x1000>; + ti,hwmods = "spinlock"; + #hwlock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt new file mode 100644 index 0000000..4563f52 --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt @@ -0,0 +1,39 @@ +Qualcomm Hardware Mutex Block: + +The hardware block provides mutexes utilized between different processors on +the SoC as part of the communication protocol used by these processors. + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,sfpb-mutex", + "qcom,tcsr-mutex" + +- syscon: + Usage: required + Value type: + Definition: one cell containing: + syscon phandle + offset of the hwmutex block within the syscon + stride of the hwmutex registers + +- #hwlock-cells: + Usage: required + Value type: + Definition: must be 1, the specified cell represent the lock id + (hwlock standard property, see hwlock.txt) + +Example: + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + hwlock@fd484000 { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; + + #hwlock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt new file mode 100644 index 0000000..9bb1240a6 --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt @@ -0,0 +1,28 @@ +SIRF Hardware spinlock device Binding +----------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + "sirf,hwspinlock" + +- reg : the register address of hwspinlock + +- #hwlock-cells : hwlock users only use the hwlock id to represent a specific + hwlock, so the number of cells should be <1> here. + +Please look at the generic hwlock binding for usage information for consumers, +"Documentation/devicetree/bindings/hwlock/hwlock.txt" + +Example of hwlock provider: + hwlock { + compatible = "sirf,hwspinlock"; + reg = <0x13240000 0x00010000>; + #hwlock-cells = <1>; + }; + +Example of hwlock users: + node { + ... + hwlocks = <&hwlock 2>; + ... + }; diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt deleted file mode 100644 index fabdf64..0000000 --- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt +++ /dev/null @@ -1,17 +0,0 @@ -Allwinner sunxi-sid - -Required properties: -- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" -- reg: Should contain registers location and length - -Example for sun4i: - sid@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10> - }; - -Example for sun7i: - sid@01c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200> - }; diff --git a/Documentation/devicetree/bindings/misc/bone_capemgr.txt b/Documentation/devicetree/bindings/misc/bone_capemgr.txt new file mode 100644 index 0000000..7e4fbc9 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/bone_capemgr.txt @@ -0,0 +1,111 @@ +* Beaglebone cape manager driver + +Required properties: +- compatible: "ti,bone-capemgr" +- eeprom: phandle to the EEPROM baseboard. + The EEPROM framework interface is use to obtain the data. + +Required children nodes: + +- baseboardmaps: Contains nodes, which each of the them defines a mapping from + the baseboard EEPROM board-name ID to a DT friendly compatible + string. + + - board-name: The baseboard EEPROM board name, i.e. A335BONE for the + original beaglebone white. + - compatible-name: The DT friendly compatible string to be used for matching + compatible capes, i.e. "ti,beaglebone" + + + - nvmem-cells: Defines the phandles of the nvmem cells of the baseboard and the + slots. + - nvmem-cells: Defines the names of the nvmem cells. Required to have at + least a baseboard cell name. + + - #slots: Defines how many slots are there. + +- Example of a beaglebone cape-manager: + +bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cell = <&baseboard_data + &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; +}; + +The format of the cape to be loaded is in a standard overlay format with +the following root properties that are interpreted by the cape manager: + +Required properties: + - compatible: Should be compatible to the baseboard according to the + baseboard map value, i.e. "ti,beaglebone". + - part-numer: Should contain the part-number as stored in the EEPROM. + - version: Should contain a list of all the version that are supported + by the single cape dtbo, i.e. "00A1". + +Optional properties: + - exclusive-use: A string list which state the resources this cape requires. + No processing or matching to anything regarding the internal + kernel state is performed; it's purpose is to guard against + conflicts with other capes. + - priority: A priority to be assigned when loading a cape. A lower value + has higher priority. The purpose of the priority is to control + which cape is loaded first in case of a conflict. + +- Example of a serial cape: + +/dts-v1/; +/plugin/; +/ { + compatible = "ti,beaglebone", "ti,beaglebone-black"; + + /* identification */ + part-number = "BB-BONE-SERL-03"; + version = "00A1"; + + /* state the resources this cape uses */ + exclusive-use = + /* the pin header uses */ + "P9.21", /* uart2_txd */ + "P9.22", /* uart2_rxd */ + /* the hardware ip uses */ + "uart2"; + + fragment@0 { + target = <&am33xx_pinmux>; + __overlay__ { + bb_uart2_pins: pinmux_bb_uart2_pins { + pinctrl-single,pins = < + 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ + 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ + >; + }; + }; + }; + + fragment@1 { + target = <&uart2>; + __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&bb_uart2_pins>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt new file mode 100644 index 0000000..d543ed3 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -0,0 +1,21 @@ +Allwinner sunxi-sid + +Required properties: +- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example for sun4i: + sid@01c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10> + }; + +Example for sun7i: + sid@01c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200> + }; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt new file mode 100644 index 0000000..b52bc11 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -0,0 +1,80 @@ += NVMEM(Non Volatile Memory) Data Device Tree Bindings = + +This binding is intended to represent the location of hardware +configuration data stored in NVMEMs like eeprom, efuses and so on. + +On a significant proportion of boards, the manufacturer has stored +some data on NVMEM, for the OS to be able to retrieve these information +and act upon it. Obviously, the OS has to know about where to retrieve +these data from, and where they are stored on the storage device. + +This document is here to document this. + += Data providers = +Contains bindings specific to provider drivers and data cells as children +of this node. + +Optional properties: + read-only: Mark the provider as read only. + += Data cells = +These are the child nodes of the provider which contain data cell +information like offset and size in nvmem provider. + +Required properties: +reg: specifies the offset in byte within the storage device. + +Optional properties: + +bits: Is pair of bit location and number of bits, which specifies offset + in bit and number of bits within the address range specified by reg property. + Offset takes values from 0-7. + +For example: + + /* Provider */ + qfprom: qfprom@00700000 { + ... + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128> + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2> + bits = <7 2> + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + + }; + ... + }; + += Data consumers = +Are device nodes which consume nvmem data cells/providers. + +Required-properties: +nvmem-cells: list of phandle to the nvmem data cells. +nvmem-cell-names: names for the each nvmem-cells specified. Required if + nvmem-cells is used. + +Optional-properties: +nvmem : list of phandles to nvmem providers. +nvmem-names: names for the each nvmem provider. required if nvmem is used. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt new file mode 100644 index 0000000..4ad68b7 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -0,0 +1,35 @@ += Qualcomm QFPROM device tree bindings = + +This binding is intended to represent QFPROM which is found in most QCOM SOCs. + +Required properties: +- compatible: should be "qcom,qfprom" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + qfprom: qfprom@00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x8000>; + ... + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x4404 0x10>; + }; + }; + + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt new file mode 100644 index 0000000..3a70073 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt @@ -0,0 +1,52 @@ +TI Wakeup M3 Remoteproc Driver +============================== + +The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor +(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks +that cannot be controlled from the MPU. This CM3 processor requires a firmware +binary to accomplish this. The wkup_m3 remoteproc driver handles the loading of +the firmware and booting of the CM3. + +Wkup M3 Device Node: +==================== +A wkup_m3 device node is used to represent the Wakeup M3 processor instance +within the SoC. It is added as a child node of the parent interconnect bus +(l4_wkup) through which it is accessible to the MPU. + +Required properties: +-------------------- +- compatible: Should be one of, + "ti,am3352-wkup-m3" for AM33xx SoCs + "ti,am4372-wkup-m3" for AM43xx SoCs +- reg: Should contain the address ranges for the two internal + memory regions, UMEM and DMEM. The parent node should + provide an appropriate ranges property for properly + translating these into bus addresses. +- reg-names: Contains the corresponding names for the two memory + regions. These should be named "umem" & "dmem". +- ti,hwmods: Name of the hwmod associated with the wkupm3 device. +- ti,pm-firmware: Name of firmware file to be used for loading and + booting the wkup_m3 remote processor. + +Example: +-------- +/* AM33xx */ +ocp { + l4_wkup: l4_wkup@44c00000 { + compatible = "am335-l4-wkup", "simple-bus"; + ranges = <0 0x44c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + + wkup_m3: wkup_m3@100000 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "/*(DEBLOBBED)*/"; + }; + }; + + ... +}; diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt index 2ba5f9c..5bec29a 100644 --- a/Documentation/devicetree/bindings/spi/omap-spi.txt +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt @@ -18,6 +18,7 @@ Optional properties: 1:1 with the DMA specifiers listed in dmas. The string naming is to be "rxN" and "txN" for RX and TX requests, respectively, where N equals the chip select number. +- ti,pio-mode: disable dma Examples: diff --git a/Documentation/devicetree/configfs-overlays.txt b/Documentation/devicetree/configfs-overlays.txt new file mode 100644 index 0000000..5fa43e0 --- /dev/null +++ b/Documentation/devicetree/configfs-overlays.txt @@ -0,0 +1,31 @@ +Howto use the configfs overlay interface. + +A device-tree configfs entry is created in /config/device-tree/overlays +and and it is manipulated using standard file system I/O. +Note that this is a debug level interface, for use by developers and +not necessarily something accessed by normal users due to the +security implications of having direct access to the kernel's device tree. + +* To create an overlay you mkdir the directory: + + # mkdir /config/device-tree/overlays/foo + +* Either you echo the overlay firmware file to the path property file. + + # echo foo.dtbo >/config/device-tree/overlays/foo/path + +* Or you cat the contents of the overlay to the dtbo file + + # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo + +The overlay file will be applied, and devices will be created/destroyed +as required. + +To remove it simply rmdir the directory. + + # rmdir /config/device-tree/overlays/foo + +The rationalle of the dual interface (firmware & direct copy) is that each is +better suited to different use patterns. The firmware interface is what's +intended to be used by hardware managers in the kernel, while the copy interface +make sense for developers (since it avoids problems with namespaces). diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index d418a6c..00ede57 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -100,6 +100,14 @@ Finally, if you need to remove all overlays in one-go, just call of_overlay_destroy_all() which will remove every single one in the correct order. +If your board has multiple slots/places where a single overlay can work +and each slot is defined by a node, you can use the of_overlay_create_indirect() +method to select the target. + +For overlays on probeable busses, use the of_overlay_create_target_root() method +in which you supply a device node as a target root, and which all target +references in the overlay are performed relative to that node. + Overlay DTS Format ------------------ @@ -113,6 +121,11 @@ The DTS of an overlay should have the following format: target=; /* phandle target of the overlay */ or target-path="/path"; /* target path of the overlay */ + or + target-indirect { /* indirect target selector */ + foo { target|target-path ... }; + bar { .... }; + }; __overlay__ { property-a; /* add property-a to the target */ @@ -131,3 +144,11 @@ Using the non-phandle based target method allows one to use a base DT which does not contain a __symbols__ node, i.e. it was not compiled with the -@ option. The __symbols__ node is only required for the target= method, since it contains the information required to map from a phandle to a tree location. + +The indirect target requires the use of a selector target on the call to +of_overlay_create_indirect(). I.e. passing the "foo" id will select the target +in the foo node, "bar" in bar node, etc. + +Note that when using the target root create method all target references must +lie under the target root node. I.e. the overlay is not allowed to 'break' out +of the root. diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index b40fec9..eb4204c 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -51,15 +51,27 @@ configfs tree is always there, whether mounted on /config or not. An item is created via mkdir(2). The item's attributes will also appear at this time. readdir(3) can determine what the attributes are, read(2) can query their default values, and write(2) can store new -values. Like sysfs, attributes should be ASCII text files, preferably -with only one value per file. The same efficiency caveats from sysfs -apply. Don't mix more than one attribute in one attribute file. - -Like sysfs, configfs expects write(2) to store the entire buffer at -once. When writing to configfs attributes, userspace processes should -first read the entire file, modify the portions they wish to change, and -then write the entire buffer back. Attribute files have a maximum size -of one page (PAGE_SIZE, 4096 on i386). +values. Don't mix more than one attribute in one attribute file. + +There are two types of configfs attributes: + +* Normal attributes, which similar to sysfs attributes, are small ASCII text +files, with a maximum size of one page (PAGE_SIZE, 4096 on i386). Preferably +only one value per file should be used, and the same caveats from sysfs apply. +Configfs expects write(2) to store the entire buffer at once. When writing to +normal configfs attributes, userspace processes should first read the entire +file, modify the portions they wish to change, and then write the entire +buffer back. + +* Binary attributes, which are somewhat similar to sysfs binary attributes, +but with a few slight changes to semantics. The PAGE_SIZE limitation does not +apply, but the whole binary item must fit in single kernel vmalloc'ed buffer. +The write(2) calls from user space are buffered, and the attributes' +write_bin_attribute method will be invoked on the final close, therefore it is +imperative for user-space to check the return code of close(2) in order to +verify that the operation finished successfully. +To avoid a malicious user OOMing the kernel, there's a per-binary attribute +maximum buffer value. When an item needs to be destroyed, remove it with rmdir(2). An item cannot be destroyed if any other item has a link to it (via @@ -166,6 +178,12 @@ among other things. For that, it needs a type. ssize_t (*store_attribute)(struct config_item *, struct configfs_attribute *, const char *, size_t); + ssize_t (*read_bin_attribute)(struct config_item *, + struct configfs_bin_attribute *, + void *, size_t); + ssize_t (*write_bin_attribute)(struct config_item *, + struct configfs_bin_attribute *, + const void *, size_t); int (*allow_link)(struct config_item *src, struct config_item *target); int (*drop_link)(struct config_item *src, @@ -177,15 +195,18 @@ among other things. For that, it needs a type. struct configfs_item_operations *ct_item_ops; struct configfs_group_operations *ct_group_ops; struct configfs_attribute **ct_attrs; + struct configfs_bin_attribute **ct_bin_attrs; }; The most basic function of a config_item_type is to define what operations can be performed on a config_item. All items that have been allocated dynamically will need to provide the ct_item_ops->release() method. This method is called when the config_item's reference count -reaches zero. Items that wish to display an attribute need to provide -the ct_item_ops->show_attribute() method. Similarly, storing a new -attribute value uses the store_attribute() method. +reaches zero. Items that wish to display an normal attribute need to provide +the ct_item_ops->show_attribute() method, while binary attributes provide the +ct_item_ops->read_bin_attribute(). Similarly, storing a new normal attribute +value uses the store_attribute() method, while the binarys' attribute equivalent +is the ct_item_ops->write_bin_attribute() method. [struct configfs_attribute] @@ -207,6 +228,32 @@ ct_item_ops->show_attribute() method, that method will be called whenever userspace asks for a read(2) on the attribute. The converse will happen for write(2). +[struct configfs_bin_attribute] + + struct configfs_attribute { + struct configfs_attribute cb_attr; + void *cb_private; + size_t cb_max_size; + }; + +The binary attribute is used when the one needs to use binary blob to +appear as the contents of a file in the item's configfs directory. +To do so add the binary attribute to the NULL-terminated array +config_item_type->ct_bin_attrs, and the item appears in configfs, the +attribute file will appear with the configfs_bin_attribute->cb_attr.ca_name +filename. configfs_bin_attribute->cb_attr.ca_mode specifies the file +permissions. +The cb_private member is provided for use by the driver, while the +cb_max_size member specifies the maximum amount of vmalloc buffer +to be used. + +If binary attribute is readable and the config_item provides a +ct_item_ops->read_bin_attribute() method, that method will be called +whenever userspace asks for a read(2) on the attribute. The converse +will happen for write(2). The reads/writes are bufferred so only a +single read/write will occur; the attributes' need not concern itself +with it. + [struct config_group] A config_item cannot live in a vacuum. The only way one can be created diff --git a/Documentation/hwspinlock.txt b/Documentation/hwspinlock.txt index 62f7d4e..61c1ee9 100644 --- a/Documentation/hwspinlock.txt +++ b/Documentation/hwspinlock.txt @@ -48,6 +48,16 @@ independent, drivers. ids for predefined purposes. Should be called from a process context (might sleep). + int of_hwspin_lock_get_id(struct device_node *np, int index); + - retrieve the global lock id for an OF phandle-based specific lock. + This function provides a means for DT users of a hwspinlock module + to get the global lock id of a specific hwspinlock, so that it can + be requested using the normal hwspin_lock_request_specific() API. + The function returns a lock id number on success, -EPROBE_DEFER if + the hwspinlock device is not yet registered with the core, or other + error values. + Should be called from a process context (might sleep). + int hwspin_lock_free(struct hwspinlock *hwlock); - free a previously-assigned hwspinlock; returns 0 on success, or an appropriate error code on failure (e.g. -EINVAL if the hwspinlock diff --git a/Documentation/misc-devices/bone_capemgr.txt b/Documentation/misc-devices/bone_capemgr.txt new file mode 100644 index 0000000..2a8c766 --- /dev/null +++ b/Documentation/misc-devices/bone_capemgr.txt @@ -0,0 +1,63 @@ +--------------------------- + Beaglebone Cape-Manager +--------------------------- + +The beaglebone cape manager driver allows the automatic use of external +peripheral capes to be automatically supported by Linux without any manual +setup required by the user. + +Each beaglebone cape should contain an EEPROM that describes +it in a fixed I2C address on the i2c2 bus of the baseboard. +The format of the EEPROM is defined in the beaglebone reference +manual at: +http://beagleboard.org/static/beaglebone/latest/Docs/Hardware/BONE_SRM.pdf + +Reading the part number and revision information the manager +requests a firmware file formatted as a device tree overlay blob. + +Applying the overlay the devices are instantiated and the cape is +ready to be used. + +For instance if the part-number is BB-BONE-SERL-03 and the version is 00A1 +the firmware file requested will be BB-BONE-SERL-03-00A1-00A1.dtbo +It will be located by the in-kernel firmware +loader in the usual place, i.e. /lib/firmware/`uname -r`, /lib/firmware etc. + +The driver supports the following parameters (either as part of the kernel +command line or supplied at module insertion time). + +disable_partno: A comma delimited list of PART-NUMBER[:REV] of + disabled capes. +enable_partno: A comma delimited list of PART-NUMBER[:REV[:PRIO]] of + enabled capes. +boot_scan_period: The boot scan period in ms. When the cape manager is built-in + the kernel image, the firmware loader cannot find the files + before the rootfs is mounted. This parameter controls the + period with which the boot state is checked in that case. + +There's a sysfs control interface which is defined at the ABI documentation +area. + +Theory of operation: +-------------------- + +On driver probe the I2C EEPROM of the baseboard is read and information about +the current baseboard is retrieved. This information includes the mapping from +baseboard board name to DT friendly compatible string. I.e. the "A335BONE" board +name from EEPROM is mapped to the "ti,beaglebone" compatible string which should +be present in the dtbo to be loaded. + +Afterwards the EEPROMs declared in each slot are probed, and the EEPROMs found +are decoded keeping track the cape part-number and version data. + +Using the part-number and version a firmware file is requested (the firmware +file requested is -.dtbo). + +The dtbo is unflattend and the resulting device tree is matched against a +compatible baseboard, and in case of multiple parallel loading capes the +priorities defined are honored. That means that when there are multiple capes +being loaded in parallel the ones with the lowest priority number are loaded +first. + +Applying the device tree overlay makes the cape operational, as if it was part +of the kernel's booting device tree. diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt new file mode 100644 index 0000000..dbd40d8 --- /dev/null +++ b/Documentation/nvmem/nvmem.txt @@ -0,0 +1,152 @@ + NVMEM SUBSYSTEM + Srinivas Kandagatla + +This document explains the NVMEM Framework along with the APIs provided, +and how to use it. + +1. Introduction +=============== +*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to +retrieve configuration of SOC or Device specific data from non volatile +memories like eeprom, efuses and so on. + +Before this framework existed, NVMEM drivers like eeprom were stored in +drivers/misc, where they all had to duplicate pretty much the same code to +register a sysfs file, allow in-kernel users to access the content of the +devices they were driving, etc. + +This was also a problem as far as other in-kernel users were involved, since +the solutions used were pretty much different from one driver to another, there +was a rather big abstraction leak. + +This framework aims at solve these problems. It also introduces DT +representation for consumer devices to go get the data they require (MAC +Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This +framework is based on regmap, so that most of the abstraction available in +regmap can be reused, across multiple types of buses. + +NVMEM Providers ++++++++++++++++ + +NVMEM provider refers to an entity that implements methods to initialize, read +and write the non-volatile memory. + +2. Registering/Unregistering the NVMEM provider +=============================================== + +A NVMEM provider can register with NVMEM core by supplying relevant +nvmem configuration to nvmem_register(), on success core would return a valid +nvmem_device pointer. + +nvmem_unregister(nvmem) is used to unregister a previously registered provider. + +For example, a simple qfprom case: + +static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, +}; + +static int qfprom_probe(struct platform_device *pdev) +{ + ... + econfig.dev = &pdev->dev; + nvmem = nvmem_register(&econfig); + ... +} + +It is mandatory that the NVMEM provider has a regmap associated with its +struct device. Failure to do would return error code from nvmem_register(). + +NVMEM Consumers ++++++++++++++++ + +NVMEM consumers are the entities which make use of the NVMEM provider to +read from and to NVMEM. + +3. NVMEM cell based consumer APIs +================================= + +NVMEM cells are the data entries/fields in the NVMEM. +The NVMEM framework provides 3 APIs to read/write NVMEM cells. + +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); + +void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len); + +*nvmem_cell_get() apis will get a reference to nvmem cell for a given id, +and nvmem_cell_read/write() can then read or write to the cell. +Once the usage of the cell is finished the consumer should call *nvmem_cell_put() +to free all the allocation memory for the cell. + +4. Direct NVMEM device based consumer APIs +========================================== + +In some instances it is necessary to directly read/write the NVMEM. +To facilitate such consumers NVMEM framework provides below apis. + +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +Before the consumers can read/write NVMEM directly, it should get hold +of nvmem_controller from one of the *nvmem_device_get() api. + +The difference between these apis and cell based apis is that these apis always +take nvmem_device as parameter. + +5. Releasing a reference to the NVMEM +===================================== + +When a consumers no longer needs the NVMEM, it has to release the reference +to the NVMEM it has obtained using the APIs mentioned in the above section. +The NVMEM framework provides 2 APIs to release a reference to the NVMEM. + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); + +Both these APIs are used to release a reference to the NVMEM and +devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated +with this NVMEM. + +Userspace ++++++++++ + +6. Userspace binary interface +============================== + +Userspace can read/write the raw NVMEM file located at +/sys/bus/nvmem/devices/*/nvmem + +ex: + +hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +* +00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +... +* +0001000 + +7. DeviceTree Binding +===================== + +See Documentation/devicetree/bindings/nvmem/nvmem.txt diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 2216eb1..a54f44f 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -284,6 +284,37 @@ bitmap and its derivatives such as cpumask and nodemask: Passed by reference. +Device tree nodes: + + %pO[fnpPcCFr] + + For printing device tree nodes. The optional arguments are: + f device node full_name + n device node name + p device node phandle + P device node path spec (name + @unit) + F device node flags + c major compatible string + C full compatible string + r node reference count + Without any arguments prints full_name (same as %pOf) + The separator when using multiple arguments is '|' + + Examples: + + %pO /foo/bar@0 - Node full name + %pOf /foo/bar@0 - Same as above + %pOfp /foo/bar@0|10 - Node full name + phandle + %pOfcF /foo/bar@0|foo,device|--P- - Node full name + + major compatible string + + node flags + D - dynamic + d - detached + P - Populated + B - Populated bus + + Passed by reference + Thank you for your cooperation and attention. diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt index e6469fd..ef0219f 100644 --- a/Documentation/remoteproc.txt +++ b/Documentation/remoteproc.txt @@ -51,6 +51,12 @@ cost. rproc_shutdown() returns, and users can still use it with a subsequent rproc_boot(), if needed. + struct rproc *rproc_get_by_phandle(phandle phandle) + - Find an rproc handle using a device tree phandle. Returns the rproc + handle on success, and NULL on failure. This function increments + the remote processor's refcount, so always use rproc_put() to + decrement it back once rproc isn't needed anymore. + 3. Typical usage #include diff --git a/MAINTAINERS b/MAINTAINERS index d8afd29..01f8325 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1973,6 +1973,14 @@ W: http://bcache.evilpiepirate.org S: Maintained: F: drivers/md/bcache/ +BEAGLEBONE CAPEMANAGER +M: Pantelis Antoniou +S: Maintained +F: drivers/misc/beaglebone-capemgr.c +F: Documentation/misc-devices/bone_capemgr.txt +F: Documentation/devicetree/bindings/misc/bone_capemgr.txt +F: Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr + BEFS FILE SYSTEM S: Orphan F: Documentation/filesystems/befs.txt @@ -7130,7 +7138,6 @@ M: Ohad Ben-Cohen L: linux-omap@vger.kernel.org S: Maintained F: drivers/hwspinlock/omap_hwspinlock.c -F: arch/arm/mach-omap2/hwspinlock.c OMAP MMC SUPPORT M: Jarkko Lavinen diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9eca7ae..d4273d4 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -27,6 +27,10 @@ export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 992736b..f2e2c5f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,9 +1,15 @@ ifeq ($(CONFIG_OF),y) +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb + dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb + # Keep at91 dtb files sorted alphabetically for each SoC dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91rm9200ek.dtb \ @@ -271,6 +277,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-sabresd-wl1835.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6u-801x.dtb \ imx6dl-tx6u-811x.dtb \ @@ -279,6 +286,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-wandboard-revb1.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ + imx6q-ccimx6sbc.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-dmo-edmqmx6.dtb \ @@ -296,6 +304,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ + imx6q-sabresd-wl1835.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-tx6q-1010.dtb \ @@ -308,6 +317,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard-revb1.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ + imx6sl-evk-wl1835.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ @@ -409,6 +419,18 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-boneblack-universal.dtb \ + am335x-boneblack-wl1835mod.dtb \ + am335x-boneblack-replicape.dtb \ + am335x-boneblack-cape-bone-argus.dtb \ + am335x-boneblack-can0.dtb \ + am335x-boneblack-bbb-exp-r.dtb \ + am335x-boneblack-bbb-exp-c.dtb \ + am335x-bone-cape-bone-argus.dtb \ + am335x-bone-can0.dtb \ + am335x-arduino-tre.dtb \ + am335x-boneblack-overlay.dtb \ + am335x-bonegreen.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-nano.dtb \ @@ -420,6 +442,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ + omap4-panda-es-b3.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ diff --git a/arch/arm/boot/dts/am335x-arduino-tre.dts b/arch/arm/boot/dts/am335x-arduino-tre.dts new file mode 100644 index 0000000..ae76692f --- /dev/null +++ b/arch/arm/boot/dts/am335x-arduino-tre.dts @@ -0,0 +1,566 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "TI AM335x Arduino Tre"; + compatible = "ti,am335x-arduino-tre", "ti,am335x-boneblack", "ti,am335x-bone", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 512 MB */ + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + led0 { + label = "arduino_tre:yel:usr0"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led1 { + label = "arduino_tre:red:usr1"; + gpios = <&gpio1 22 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led2 { + label = "arduino_tre:blu:usr2"; + gpios = <&gpio1 23 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led3 { + label = "arduino_tre:grn:usr3"; + gpios = <&gpio1 24 0>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + }; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE2L", "Line In", + "LINE2R", "Line In"; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + + can_bus_pins: pinmux_can_bus_pins { + pinctrl-single,pins = < + 0x120 0x31 /* DCAN0_RX MODE1 */ + 0x11c 0x01 /* DCAN0_TX MODE1 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emac_rmii1_pins: pinmux_emac_rmii1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 0x70 /* i2c0_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + 0x18c 0x70 /* i2c0_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 0x72 /*spi0_d1-i2c1_sda,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + 0x15c 0x72 /*spi0_cs0-i2c1_scl,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x150 0x72 /*spi0_scl.i2c2_sda,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + 0x154 0x72 /*spi0_d0.i2c2_scl,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0FC (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1A0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + tre_ehrpwm1_pins: pinmux_tre_ehrpwm1_pins { + pinctrl-single,pins = < + 0x48 0x06 /* PWM1A ~102 MODE6 */ + 0x4c 0x06 /* PWM1B ~103 MODE6 */ + >; + }; + + tre_ehrpwm2_pins: pinmux_tre_ehrpwm2_pins { + pinctrl-single,pins = < + 0x20 0x04 /* PWM2A ~100 MODE4 */ + 0x24 0x04 /* PWM2B ~101 MODE4 */ + >; + }; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + tre_audio_pins: pinmux_tre_audio_pins { + pinctrl-single,pins = < + 0x1ac 0x00 /*mcasp0_ahclkx (AUD_MCLK)->12MHz, INPUT | MODE0*/ + 0x190 0x20 /* mcasp0_aclkx (AUD_BCLK)->, INPUT | MODE0*/ + 0x194 0x20 /* mcasp0_fsx (AUD_FSX)-> , INPUT | MODE0*/ + 0x198 0x20 /* mcasp0_axr0 (AUD_DIN)<-, INPUT | MODE0*/ + 0x19c 0x22 /* mcasp0_ahclkr-_axr2 (AUD_DOUT)->, | MODE2*/ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x168 0x14 /* MOSI1 OUTPUT_PULLUP | MODE0 */ + 0x16c 0x34 /* MISO1 INPUT_PULLUP | MODE0 */ + 0x108 0x12 /* SCK1 OUTPUT_PULLUP | MODE0 */ + 0x164 0x12 /* SS1 OUTPUT_PULLUP | MODE0 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x180 0x30 /* UART1_rxd PULL_UP | MODE0 */ + 0x184 0x00 /* UART1_txd MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x12c 0x31 /* UART2_rxd PULL_UP | MODE1 */ + 0x130 0x01 /* UART2_txd MODE1 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x70 0x36 /* UART4_rxd PULL_UP | MODE6 */ + 0x74 0x06 /* UART4_txd MODE6 */ + >; + }; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&can_bus_pins>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + tps: tps@24 { + reg = <0x24>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + + tlv320aic3x: tlv320aic3x@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + status = "okay"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + +&epwmss1 { + status = "okay"; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm1_pins>; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm2_pins>; +}; + +&lcdc { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; + + control@44e10620 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@47402000 { + status = "okay"; + }; +}; + +#include "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.925V - 1.325V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.925V - 1.15V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; + + rtc@44e3e000 { + ti,system-power-controller; + }; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&tre_audio_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 2 0 1 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_rmii1_pins>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone-argus.dtsi b/arch/arm/boot/dts/am335x-bone-argus.dtsi new file mode 100644 index 0000000..a44c7d1 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-argus.dtsi @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-cape-rtc-ds1307.dtsi" + +/ { + ocp { + P8_07_pinmux { + /* gpio2[2] */ + status = "disabled"; + }; + P8_08_pinmux { + /* gpio2[3] */ + status = "disabled"; + }; + P8_09_pinmux { + /* gpio2[5] */ + status = "disabled"; + }; + P8_10_pinmux { + /* gpio2[4] */ + status = "disabled"; + }; + P9_11_pinmux { + /* gpio0[30] */ + status = "disabled"; + }; + P9_17_pinmux { + /* gpio0[5] */ + status = "disabled"; + }; + P9_18_pinmux { + /* gpio0[4] */ + status = "disabled"; + }; + P9_41_pinmux { + /* gpio0[20] */ + status = "disabled"; + }; + P9_42_pinmux { + /* gpio0[7] */ + status = "disabled"; + }; + }; +}; + +/ { + argus-ups { + compatible = "argus-ups"; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&argus_ups_pins>; /* Refer to previous label */ + /* This section communicates the gpio numbers to the driver module */ + /* Note that gpio controllers appear to be numbered from 1-n here rather than 0-(n-1)????? */ + gpios = <&gpio0 30 0>, /* Request */ + <&gpio0 5 0>, /* Acknowledge */ + <&gpio0 4 0>, /* Watchdog */ + <&gpio2 2 0>, /* LED 1 Green */ + <&gpio2 3 0>, /* LED 1 Red */ + <&gpio2 5 0>, /* LED 2 Green */ + <&gpio2 4 0>, /* LED 2 Red */ + <&gpio0 20 0>, /* General Output #1 */ + <&gpio0 7 0>; /* General Output #2 */ + debug = <1>; + shutdown = <1>; + }; +}; + +&am33xx_pinmux { + argus_ups_pins: pinmux_argus_ups_pins { /* Set up pinmux */ + pinctrl-single,pins = < + 0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_d1.gpio0_4 */ + 0x090 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_advn_ale.gpio_2 */ + 0x094 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + 0x09c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + 0x098 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_gpmc_wen.gpio2_4 */ + 0x1b4 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0_20 */ + 0x164 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-can0.dts b/arch/arm/boot/dts/am335x-bone-can0.dts new file mode 100644 index 0000000..a5777c4 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-can0.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; +}; + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +/* #include "am335x-peripheral-can1.dtsi" */ +/* #include "am335x-bone-pinmux-can1.dtsi" */ + +/* #include "am335x-peripheral-i2c2.dtsi" */ +/* #include "am335x-bone-pinmux-i2c2.dtsi" */ + +/* #include "am335x-peripheral-ttyS1.dtsi" */ +/* #include "am335x-bone-pinmux-ttyS1.dtsi" */ + +/* #include "am335x-peripheral-ttyS2.dtsi" */ +/* #include "am335x-bone-pinmux-ttyS2.dtsi" */ + +/* #include "am335x-peripheral-ttyS4.dtsi" */ +/* #include "am335x-bone-pinmux-ttyS4.dtsi" */ + +/* #include "am335x-peripheral-ttyS5.dtsi" */ +/* #include "am335x-bone-pinmux-ttyS5.dtsi" */ diff --git a/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts new file mode 100644 index 0000000..a92d891 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-cape-bone-argus.dts @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + /* pinctrl-0 = <&clkout2_pin>; */ +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +#include "am335x-bone-argus.dtsi" diff --git a/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi new file mode 100644 index 0000000..b18b855 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-no-capemgr.dtsi @@ -0,0 +1,351 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common-universal.dtsi b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi new file mode 100644 index 0000000..781e33f --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi @@ -0,0 +1,2052 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + /* P8_02 GND */ + /* P8_03 (ZCZ ball R9 ) emmc */ + /* P8_04 (ZCZ ball T9 ) emmc */ + /* P8_05 (ZCZ ball R8 ) emmc */ + /* P8_06 (ZCZ ball T8 ) emmc */ + + /* P8_07 (ZCZ ball R7 ) */ + P8_07_default_pin: pinmux_P8_07_default_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { + pinctrl-single,pins = <0x090 0x2F>; }; /* Mode 7, RxActive */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { + pinctrl-single,pins = <0x090 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { + pinctrl-single,pins = <0x090 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_08 (ZCZ ball T7 ) */ + P8_08_default_pin: pinmux_P8_08_default_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { + pinctrl-single,pins = <0x094 0x2F>; }; /* Mode 7, RxActive */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { + pinctrl-single,pins = <0x094 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { + pinctrl-single,pins = <0x094 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_09 (ZCZ ball T6 ) */ + P8_09_default_pin: pinmux_P8_09_default_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { + pinctrl-single,pins = <0x09c 0x2F>; }; /* Mode 7, RxActive */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { + pinctrl-single,pins = <0x09c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { + pinctrl-single,pins = <0x09c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_10 (ZCZ ball U6 ) */ + P8_10_default_pin: pinmux_P8_10_default_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { + pinctrl-single,pins = <0x098 0x2F>; }; /* Mode 7, RxActive */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { + pinctrl-single,pins = <0x098 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { + pinctrl-single,pins = <0x098 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_11 (ZCZ ball R12) */ + P8_11_default_pin: pinmux_P8_11_default_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { + pinctrl-single,pins = <0x034 0x2F>; }; /* Mode 7, RxActive */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { + pinctrl-single,pins = <0x034 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { + pinctrl-single,pins = <0x034 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { + pinctrl-single,pins = <0x034 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_12 (ZCZ ball T12) */ + P8_12_default_pin: pinmux_P8_12_default_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { + pinctrl-single,pins = <0x030 0x2F>; }; /* Mode 7, RxActive */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { + pinctrl-single,pins = <0x030 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { + pinctrl-single,pins = <0x030 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { + pinctrl-single,pins = <0x030 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_13 (ZCZ ball T10) */ + P8_13_default_pin: pinmux_P8_13_default_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { + pinctrl-single,pins = <0x024 0x2F>; }; /* Mode 7, RxActive */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { + pinctrl-single,pins = <0x024 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { + pinctrl-single,pins = <0x024 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_14 (ZCZ ball T11) */ + P8_14_default_pin: pinmux_P8_14_default_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_gpio_pin: pinmux_P8_14_gpio_pin { + pinctrl-single,pins = <0x028 0x2F>; }; /* Mode 7, RxActive */ + P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { + pinctrl-single,pins = <0x028 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_pwm_pin: pinmux_P8_14_pwm_pin { + pinctrl-single,pins = <0x028 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_15 (ZCZ ball U13) */ + P8_15_default_pin: pinmux_P8_15_default_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { + pinctrl-single,pins = <0x03c 0x2F>; }; /* Mode 7, RxActive */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { + pinctrl-single,pins = <0x03c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { + pinctrl-single,pins = <0x03c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { + pinctrl-single,pins = <0x03c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_16 (ZCZ ball V13) */ + P8_16_default_pin: pinmux_P8_16_default_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { + pinctrl-single,pins = <0x038 0x2F>; }; /* Mode 7, RxActive */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { + pinctrl-single,pins = <0x038 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { + pinctrl-single,pins = <0x038 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { + pinctrl-single,pins = <0x038 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_17 (ZCZ ball U12) */ + P8_17_default_pin: pinmux_P8_17_default_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_gpio_pin: pinmux_P8_17_gpio_pin { + pinctrl-single,pins = <0x02c 0x2F>; }; /* Mode 7, RxActive */ + P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { + pinctrl-single,pins = <0x02c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_pwm_pin: pinmux_P8_17_pwm_pin { + pinctrl-single,pins = <0x02c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_18 (ZCZ ball V12) */ + P8_18_default_pin: pinmux_P8_18_default_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { + pinctrl-single,pins = <0x08c 0x2F>; }; /* Mode 7, RxActive */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { + pinctrl-single,pins = <0x08c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_19 (ZCZ ball U10) */ + P8_19_default_pin: pinmux_P8_19_default_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { + pinctrl-single,pins = <0x020 0x2F>; }; /* Mode 7, RxActive */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { + pinctrl-single,pins = <0x020 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { + pinctrl-single,pins = <0x020 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_20 (ZCZ ball V9 ) emmc */ + /* P8_21 (ZCZ ball U9 ) emmc */ + /* P8_22 (ZCZ ball V8 ) emmc */ + /* P8_23 (ZCZ ball U8 ) emmc */ + /* P8_24 (ZCZ ball V7 ) emmc */ + /* P8_25 (ZCZ ball U7 ) emmc */ + + /* P8_26 (ZCZ ball V6 ) */ + P8_26_default_pin: pinmux_P8_26_default_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pin: pinmux_P8_26_gpio_pin { + pinctrl-single,pins = <0x07c 0x2F>; }; /* Mode 7, RxActive */ + P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { + pinctrl-single,pins = <0x07c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_27 (ZCZ ball U5 ) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { + pinctrl-single,pins = <0x0e0 0x2F>; }; /* Mode 7, RxActive */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { + pinctrl-single,pins = <0x0e0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { + pinctrl-single,pins = <0x0e0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { + pinctrl-single,pins = <0x0e0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_27_hdmi_pin: pinmux_P8_27_hdmi_pin { + pinctrl-single,pins = <0x0e0 0x00>; }; /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_28 (ZCZ ball V5 ) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { + pinctrl-single,pins = <0x0e8 0x2F>; }; /* Mode 7, RxActive */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { + pinctrl-single,pins = <0x0e8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { + pinctrl-single,pins = <0x0e8 0x05>; }; /* Mode 5, Pull-Down */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { + pinctrl-single,pins = <0x0e8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_28_hdmi_pin: pinmux_P8_28_hdmi_pin { + pinctrl-single,pins = <0x0e8 0x00>; }; /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_29 (ZCZ ball R5 ) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { + pinctrl-single,pins = <0x0e4 0x2F>; }; /* Mode 7, RxActive */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { + pinctrl-single,pins = <0x0e4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { + pinctrl-single,pins = <0x0e4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { + pinctrl-single,pins = <0x0e4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_29_hdmi_pin: pinmux_P8_29_hdmi_pin { + pinctrl-single,pins = <0x0e4 0x00>; }; /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_30 (ZCZ ball R6 ) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { + pinctrl-single,pins = <0x0ec 0x2F>; }; /* Mode 7, RxActive */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { + pinctrl-single,pins = <0x0ec 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { + pinctrl-single,pins = <0x0ec 0x05>; }; /* Mode 5, Pull-Down*/ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { + pinctrl-single,pins = <0x0ec 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_30_hdmi_pin: pinmux_P8_30_hdmi_pin { + pinctrl-single,pins = <0x0ec 0x00>; }; /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_31 (ZCZ ball V4 ) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { + pinctrl-single,pins = <0x0d8 0x2F>; }; /* Mode 7, RxActive */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { + pinctrl-single,pins = <0x0d8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { + pinctrl-single,pins = <0x0d8 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_31_hdmi_pin: pinmux_P8_31_hdmi_pin { + pinctrl-single,pins = <0x0d8 0x08>; }; /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_32 (ZCZ ball T5 ) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { + pinctrl-single,pins = <0x0dc 0x2F>; }; /* Mode 7, RxActive */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { + pinctrl-single,pins = <0x0dc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_uart_pin: pinmux_P8_32_uart_pin { + pinctrl-single,pins = <0x0dc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_32_hdmi_pin: pinmux_P8_32_hdmi_pin { + pinctrl-single,pins = <0x0dc 0x08>; }; /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_33 (ZCZ ball V3 ) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { + pinctrl-single,pins = <0x0d4 0x2F>; }; /* Mode 7, RxActive */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { + pinctrl-single,pins = <0x0d4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_hdmi_pin: pinmux_P8_33_hdmi_pin { + pinctrl-single,pins = <0x0d4 0x08>; }; /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_34 (ZCZ ball U4 ) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { + pinctrl-single,pins = <0x0cc 0x2F>; }; /* Mode 7, RxActive */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { + pinctrl-single,pins = <0x0cc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { + pinctrl-single,pins = <0x0cc 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_34_hdmi_pin: pinmux_P8_34_hdmi_pin { + pinctrl-single,pins = <0x0cc 0x08>; }; /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_35 (ZCZ ball V2 ) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { + pinctrl-single,pins = <0x0d0 0x2F>; }; /* Mode 7, RxActive */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { + pinctrl-single,pins = <0x0d0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_hdmi_pin: pinmux_P8_35_hdmi_pin { + pinctrl-single,pins = <0x0d0 0x08>; }; /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_36 (ZCZ ball U3 ) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { + pinctrl-single,pins = <0x0c8 0x2F>; }; /* Mode 7, RxActive */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { + pinctrl-single,pins = <0x0c8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { + pinctrl-single,pins = <0x0c8 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_36_hdmi_pin: pinmux_P8_36_hdmi_pin { + pinctrl-single,pins = <0x0c8 0x08>; }; /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_37 (ZCZ ball U1 ) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { + pinctrl-single,pins = <0x0c0 0x2F>; }; /* Mode 7, RxActive */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { + pinctrl-single,pins = <0x0c0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { + pinctrl-single,pins = <0x0c0 0x04>; }; /* Mode 4, Pull-Down*/ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { + pinctrl-single,pins = <0x0c0 0x02>; }; /* Mode 2, Pull-Down*/ + P8_37_hdmi_pin: pinmux_P8_37_hdmi_pin { + pinctrl-single,pins = <0x0c0 0x08>; }; /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_38 (ZCZ ball U2 ) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { + pinctrl-single,pins = <0x0c4 0x2F>; }; /* Mode 7, RxActive */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { + pinctrl-single,pins = <0x0c4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { + pinctrl-single,pins = <0x0c4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { + pinctrl-single,pins = <0x0c4 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_38_hdmi_pin: pinmux_P8_38_hdmi_pin { + pinctrl-single,pins = <0x0c4 0x08>; }; /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_39 (ZCZ ball T3 ) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { + pinctrl-single,pins = <0x0b8 0x2F>; }; /* Mode 7, RxActive */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { + pinctrl-single,pins = <0x0b8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { + pinctrl-single,pins = <0x0b8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { + pinctrl-single,pins = <0x0b8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_39_hdmi_pin: pinmux_P8_39_hdmi_pin { + pinctrl-single,pins = <0x0b8 0x08>; }; /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_40 (ZCZ ball T4 ) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { + pinctrl-single,pins = <0x0bc 0x2F>; }; /* Mode 7, RxActive */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { + pinctrl-single,pins = <0x0bc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { + pinctrl-single,pins = <0x0bc 0x05>; }; /* Mode 5, Pull-Down*/ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { + pinctrl-single,pins = <0x0bc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_40_hdmi_pin: pinmux_P8_40_hdmi_pin { + pinctrl-single,pins = <0x0bc 0x08>; }; /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_41 (ZCZ ball T1 ) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { + pinctrl-single,pins = <0x0b0 0x2F>; }; /* Mode 7, RxActive */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { + pinctrl-single,pins = <0x0b0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { + pinctrl-single,pins = <0x0b0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { + pinctrl-single,pins = <0x0b0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_41_hdmi_pin: pinmux_P8_41_hdmi_pin { + pinctrl-single,pins = <0x0b0 0x08>; }; /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_42 (ZCZ ball T2 ) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { + pinctrl-single,pins = <0x0b4 0x2F>; }; /* Mode 7, RxActive */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { + pinctrl-single,pins = <0x0b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { + pinctrl-single,pins = <0x0b4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { + pinctrl-single,pins = <0x0b4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_42_hdmi_pin: pinmux_P8_42_hdmi_pin { + pinctrl-single,pins = <0x0b4 0x08>; }; /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_43 (ZCZ ball R3 ) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { + pinctrl-single,pins = <0x0a8 0x2F>; }; /* Mode 7, RxActive */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { + pinctrl-single,pins = <0x0a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { + pinctrl-single,pins = <0x0a8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { + pinctrl-single,pins = <0x0a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { + pinctrl-single,pins = <0x0a8 0x03>; }; /* Mode 3, Pull-Down */ + P8_43_hdmi_pin: pinmux_P8_43_hdmi_pin { + pinctrl-single,pins = <0x0a8 0x08>; }; /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_44 (ZCZ ball R4 ) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { + pinctrl-single,pins = <0x0ac 0x2F>; }; /* Mode 7, RxActive */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { + pinctrl-single,pins = <0x0ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { + pinctrl-single,pins = <0x0ac 0x05>; }; /* Mode 5, Pull-Down*/ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { + pinctrl-single,pins = <0x0ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { + pinctrl-single,pins = <0x0ac 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P8_44_hdmi_pin: pinmux_P8_44_hdmi_pin { + pinctrl-single,pins = <0x0ac 0x08>; }; /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_45 (ZCZ ball R1 ) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { + pinctrl-single,pins = <0x0a0 0x2F>; }; /* Mode 7, RxActive */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { + pinctrl-single,pins = <0x0a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { + pinctrl-single,pins = <0x0a0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { + pinctrl-single,pins = <0x0a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { + pinctrl-single,pins = <0x0a0 0x03>; }; /* Mode 3, Pull-Down*/ + P8_45_hdmi_pin: pinmux_P8_45_hdmi_pin { + pinctrl-single,pins = <0x0a0 0x08>; }; /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_46 (ZCZ ball R2 ) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { + pinctrl-single,pins = <0x0a4 0x2F>; }; /* Mode 7, RxActive */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { + pinctrl-single,pins = <0x0a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { + pinctrl-single,pins = <0x0a4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { + pinctrl-single,pins = <0x0a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { + pinctrl-single,pins = <0x0a4 0x03>; }; /* Mode 3, Pull-Down*/ + P8_46_hdmi_pin: pinmux_P8_46_hdmi_pin { + pinctrl-single,pins = <0x0a4 0x08>; }; /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + /* P9_02 GND */ + /* P9_03 3.3V */ + /* P9_04 3.3V */ + /* P9_05 VDD_5V */ + /* P9_06 VDD_5V */ + /* P9_07 SYS_5V */ + /* P9_08 SYS_5V */ + /* P9_09 PWR_BUT */ + /* P9_10 (ZCZ ball A10) RESETn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_12 (ZCZ ball U18) */ + P9_12_default_pin: pinmux_P9_12_default_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { + pinctrl-single,pins = <0x078 0x2F>; }; /* Mode 7, RxActive */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { + pinctrl-single,pins = <0x078 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P9_13 (ZCZ ball U17) */ + P9_13_default_pin: pinmux_P9_13_default_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { + pinctrl-single,pins = <0x074 0x2F>; }; /* Mode 7, RxActive */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { + pinctrl-single,pins = <0x074 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { + pinctrl-single,pins = <0x074 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_14 (ZCZ ball U14) */ + P9_14_default_pin: pinmux_P9_14_default_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { + pinctrl-single,pins = <0x048 0x2F>; }; /* Mode 7, RxActive */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { + pinctrl-single,pins = <0x048 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { + pinctrl-single,pins = <0x048 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_15 (ZCZ ball R13) */ + P9_15_default_pin: pinmux_P9_15_default_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { + pinctrl-single,pins = <0x040 0x2F>; }; /* Mode 7, RxActive */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { + pinctrl-single,pins = <0x040 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { + pinctrl-single,pins = <0x040 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_16 (ZCZ ball T14) */ + P9_16_default_pin: pinmux_P9_16_default_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { + pinctrl-single,pins = <0x04c 0x2F>; }; /* Mode 7, RxActive */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { + pinctrl-single,pins = <0x04c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { + pinctrl-single,pins = <0x04c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_17 (ZCZ ball A16) */ + P9_17_default_pin: pinmux_P9_17_default_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { + pinctrl-single,pins = <0x15c 0x2F>; }; /* Mode 7, RxActive */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { + pinctrl-single,pins = <0x15c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_17_spi_pin: pinmux_P9_17_spi_pin { + pinctrl-single,pins = <0x15c 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { + pinctrl-single,pins = <0x15c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { + pinctrl-single,pins = <0x15c 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_18 (ZCZ ball B16) */ + P9_18_default_pin: pinmux_P9_18_default_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { + pinctrl-single,pins = <0x158 0x2F>; }; /* Mode 7, RxActive */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { + pinctrl-single,pins = <0x158 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { + pinctrl-single,pins = <0x158 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { + pinctrl-single,pins = <0x158 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { + pinctrl-single,pins = <0x158 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_19 (ZCZ ball D17) */ + P9_19_default_pin: pinmux_P9_19_default_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { + pinctrl-single,pins = <0x17c 0x2F>; }; /* Mode 7, RxActive */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { + pinctrl-single,pins = <0x17c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_19_can_pin: pinmux_P9_19_can_pin { + pinctrl-single,pins = <0x17c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { + pinctrl-single,pins = <0x17c 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_20 (ZCZ ball D18) */ + P9_20_default_pin: pinmux_P9_20_default_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { + pinctrl-single,pins = <0x178 0x2F>; }; /* Mode 7, RxActive */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { + pinctrl-single,pins = <0x178 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_20_can_pin: pinmux_P9_20_can_pin { + pinctrl-single,pins = <0x178 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { + pinctrl-single,pins = <0x178 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_21 (ZCZ ball B17) */ + P9_21_default_pin: pinmux_P9_21_default_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { + pinctrl-single,pins = <0x154 0x2F>; }; /* Mode 7, RxActive */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { + pinctrl-single,pins = <0x154 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { + pinctrl-single,pins = <0x154 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { + pinctrl-single,pins = <0x154 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { + pinctrl-single,pins = <0x154 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { + pinctrl-single,pins = <0x154 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_22 (ZCZ ball A17) */ + P9_22_default_pin: pinmux_P9_22_default_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { + pinctrl-single,pins = <0x150 0x2F>; }; /* Mode 7, RxActive */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { + pinctrl-single,pins = <0x150 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_22_spi_pin: pinmux_P9_22_spi_pin { + pinctrl-single,pins = <0x150 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { + pinctrl-single,pins = <0x150 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { + pinctrl-single,pins = <0x150 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { + pinctrl-single,pins = <0x150 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_23 (ZCZ ball V14) */ + P9_23_default_pin: pinmux_P9_23_default_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { + pinctrl-single,pins = <0x044 0x2F>; }; /* Mode 7, RxActive */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { + pinctrl-single,pins = <0x044 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { + pinctrl-single,pins = <0x044 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_24 (ZCZ ball D15) */ + P9_24_default_pin: pinmux_P9_24_default_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { + pinctrl-single,pins = <0x184 0x2F>; }; /* Mode 7, RxActive */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { + pinctrl-single,pins = <0x184 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { + pinctrl-single,pins = <0x184 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_24_can_pin: pinmux_P9_24_can_pin { + pinctrl-single,pins = <0x184 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { + pinctrl-single,pins = <0x184 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { + pinctrl-single,pins = <0x184 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_25 (ZCZ ball A14) Audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { + pinctrl-single,pins = <0x1ac 0x2F>; }; /* Mode 7, RxActive */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { + pinctrl-single,pins = <0x1ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { + pinctrl-single,pins = <0x1ac 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { + pinctrl-single,pins = <0x1ac 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { + pinctrl-single,pins = <0x1ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_25_audio_pin: pinmux_P9_25_audio_pin { + pinctrl-single,pins = <0x1ac (PIN_INPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_ahclkx.mcasp0_ahclkx */ + + /* P9_26 (ZCZ ball D16) */ + P9_26_default_pin: pinmux_P9_26_default_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { + pinctrl-single,pins = <0x180 0x2F>; }; /* Mode 7, RxActive */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { + pinctrl-single,pins = <0x180 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { + pinctrl-single,pins = <0x180 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_26_can_pin: pinmux_P9_26_can_pin { + pinctrl-single,pins = <0x180 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { + pinctrl-single,pins = <0x180 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { + pinctrl-single,pins = <0x180 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_27 (ZCZ ball C13) */ + P9_27_default_pin: pinmux_P9_27_default_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { + pinctrl-single,pins = <0x1a4 0x2F>; }; /* Mode 7, RxActive */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { + pinctrl-single,pins = <0x1a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { + pinctrl-single,pins = <0x1a4 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { + pinctrl-single,pins = <0x1a4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { + pinctrl-single,pins = <0x1a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_28 (ZCZ ball C12) Audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { + pinctrl-single,pins = <0x19c 0x2F>; }; /* Mode 7, RxActive */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { + pinctrl-single,pins = <0x19c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { + pinctrl-single,pins = <0x19c 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_28_spi_pin: pinmux_P9_28_spi_pin { + pinctrl-single,pins = <0x19c 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { + pinctrl-single,pins = <0x19c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { + pinctrl-single,pins = <0x19c 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { + pinctrl-single,pins = <0x19c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_28_audio_pin: pinmux_P9_28_audio_pin { + pinctrl-single,pins = <0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)>; }; /* mcasp0_ahclkr.mcasp0_axr2 */ + + /* P9_29 (ZCZ ball B13) Audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { + pinctrl-single,pins = <0x194 0x2F>; }; /* Mode 7, RxActive */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { + pinctrl-single,pins = <0x194 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { + pinctrl-single,pins = <0x194 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { + pinctrl-single,pins = <0x194 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { + pinctrl-single,pins = <0x194 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { + pinctrl-single,pins = <0x194 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_29_audio_pin: pinmux_P9_29_audio_pin { + pinctrl-single,pins = <0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_fsx.mcasp0_fsx */ + + /* P9_30 (ZCZ ball D12) */ + P9_30_default_pin: pinmux_P9_30_default_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_gpio_pin: pinmux_P9_30_gpio_pin { + pinctrl-single,pins = <0x198 0x2F>; }; /* Mode 7, RxActive */ + P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { + pinctrl-single,pins = <0x198 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_pwm_pin: pinmux_P9_30_pwm_pin { + pinctrl-single,pins = <0x198 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_30_spi_pin: pinmux_P9_30_spi_pin { + pinctrl-single,pins = <0x198 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_30_pruout_pin: pinmux_P9_30_pruout_pin { + pinctrl-single,pins = <0x198 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_30_pruin_pin: pinmux_P9_30_pruin_pin { + pinctrl-single,pins = <0x198 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_31 (ZCZ ball A13) Audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { + pinctrl-single,pins = <0x190 0x2F>; }; /* Mode 7, RxActive */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { + pinctrl-single,pins = <0x190 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { + pinctrl-single,pins = <0x190 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_31_spi_pin: pinmux_P9_31_spi_pin { + pinctrl-single,pins = <0x190 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { + pinctrl-single,pins = <0x190 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { + pinctrl-single,pins = <0x190 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_31_audio_pin: pinmux_P9_31_audio_pin { + pinctrl-single,pins = <0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)>; }; /* mcasp0_aclkx.mcasp0_aclkx */ + + /* P9_32 VADC */ + /* P9_33 (ZCZ ball C8 ) AIN4 */ + /* P9_34 AGND */ + /* P9_35 (ZCZ ball A8 ) AIN6 */ + /* P9_36 (ZCZ ball B8 ) AIN5 */ + /* P9_37 (ZCZ ball B7 ) AIN2 */ + /* P9_38 (ZCZ ball A7 ) AIN3 */ + /* P9_39 (ZCZ ball B6 ) AIN0 */ + /* P9_40 (ZCZ ball C7 ) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_default_pin: pinmux_P9_41_default_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { + pinctrl-single,pins = <0x1b4 0x2F>; }; /* Mode 7, RxActive */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { + pinctrl-single,pins = <0x1b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { + pinctrl-single,pins = <0x1b4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { + pinctrl-single,pins = <0x1b4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_default_pin: pinmux_P9_91_default_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { + pinctrl-single,pins = <0x1a8 0x2F>; }; /* Mode 7, RxActive */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { + pinctrl-single,pins = <0x1a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { + pinctrl-single,pins = <0x1a8 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { + pinctrl-single,pins = <0x1a8 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { + pinctrl-single,pins = <0x1a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_42 (ZCZ ball C18) */ + P9_42_default_pin: pinmux_P9_42_default_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { + pinctrl-single,pins = <0x164 0x2F>; }; /* Mode 7, RxActive */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { + pinctrl-single,pins = <0x164 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { + pinctrl-single,pins = <0x164 0x20>; }; /* Mode 0, Pull-Down, RxActive */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { + pinctrl-single,pins = <0x164 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_42_spics_pin: pinmux_P9_42_spics_pin { + pinctrl-single,pins = <0x164 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P9_42_spiclk_pin: pinmux_P9_42_spiclk_pin { + pinctrl-single,pins = <0x164 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_default_pin: pinmux_P9_92_default_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { + pinctrl-single,pins = <0x1a0 0x2F>; }; /* Mode 7, RxActive */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { + pinctrl-single,pins = <0x1a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { + pinctrl-single,pins = <0x1a0 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { + pinctrl-single,pins = <0x1a0 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { + pinctrl-single,pins = <0x1a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_43 GND */ + /* P9_44 GND */ + /* P9_45 GND */ + /* P9_46 GND */ +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_timer_pin>; + }; + + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_timer_pin>; + }; + + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_timer_pin>; + }; + + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_timer_pin>; + }; + + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_pruout_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + }; + + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_pruout_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + }; + + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_pwm_pin>; + }; + + P8_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_14_default_pin>; + pinctrl-1 = <&P8_14_gpio_pin>; + pinctrl-2 = <&P8_14_gpio_pu_pin>; + pinctrl-3 = <&P8_14_gpio_pd_pin>; + pinctrl-4 = <&P8_14_pwm_pin>; + }; + + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_pruin_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + }; + + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_pruin_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + }; + + P8_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_17_default_pin>; + pinctrl-1 = <&P8_17_gpio_pin>; + pinctrl-2 = <&P8_17_gpio_pu_pin>; + pinctrl-3 = <&P8_17_gpio_pd_pin>; + pinctrl-4 = <&P8_17_pwm_pin>; + }; + + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + }; + + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_pwm_pin>; + }; + + P8_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_26_default_pin>; + pinctrl-1 = <&P8_26_gpio_pin>; + pinctrl-2 = <&P8_26_gpio_pu_pin>; + pinctrl-3 = <&P8_26_gpio_pd_pin>; + }; + + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_pruout_pin>; + pinctrl-5 = <&P8_27_pruin_pin>; + pinctrl-6 = <&P8_27_hdmi_pin>; + }; + + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_pruout_pin>; + pinctrl-5 = <&P8_28_pruin_pin>; + pinctrl-6 = <&P8_28_hdmi_pin>; + }; + + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_pruout_pin>; + pinctrl-5 = <&P8_29_pruin_pin>; + pinctrl-6 = <&P8_29_hdmi_pin>; + }; + + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_pruout_pin>; + pinctrl-5 = <&P8_30_pruin_pin>; + pinctrl-6 = <&P8_30_hdmi_pin>; + }; + + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart", "hdmi"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_uart_pin>; + pinctrl-5 = <&P8_31_hdmi_pin>; + }; + + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_hdmi_pin>; + }; + + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_hdmi_pin>; + }; + + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_pwm_pin>; + pinctrl-5 = <&P8_34_hdmi_pin>; + }; + + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_hdmi_pin>; + }; + + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_pwm_pin>; + pinctrl-5 = <&P8_36_hdmi_pin>; + }; + + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_uart_pin>; + pinctrl-5 = <&P8_37_pwm_pin>; + pinctrl-6 = <&P8_37_hdmi_pin>; + }; + + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_uart_pin>; + pinctrl-5 = <&P8_38_pwm_pin>; + pinctrl-6 = <&P8_38_hdmi_pin>; + }; + + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_pruout_pin>; + pinctrl-5 = <&P8_39_pruin_pin>; + pinctrl-6 = <&P8_39_hdmi_pin>; + }; + + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_pruout_pin>; + pinctrl-5 = <&P8_40_pruin_pin>; + pinctrl-6 = <&P8_40_hdmi_pin>; + }; + + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_pruout_pin>; + pinctrl-5 = <&P8_41_pruin_pin>; + pinctrl-6 = <&P8_41_hdmi_pin>; + }; + + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_pruout_pin>; + pinctrl-5 = <&P8_42_pruin_pin>; + pinctrl-6 = <&P8_42_hdmi_pin>; + }; + + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_pruout_pin>; + pinctrl-5 = <&P8_43_pruin_pin>; + pinctrl-6 = <&P8_43_pwm_pin>; + pinctrl-7 = <&P8_43_hdmi_pin>; + }; + + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_pruout_pin>; + pinctrl-5 = <&P8_44_pruin_pin>; + pinctrl-6 = <&P8_44_pwm_pin>; + pinctrl-7 = <&P8_44_hdmi_pin>; + }; + + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_pruout_pin>; + pinctrl-5 = <&P8_45_pruin_pin>; + pinctrl-6 = <&P8_45_pwm_pin>; + pinctrl-7 = <&P8_45_hdmi_pin>; + }; + + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_pruout_pin>; + pinctrl-5 = <&P8_46_pruin_pin>; + pinctrl-6 = <&P8_46_pwm_pin>; + pinctrl-7 = <&P8_46_hdmi_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_uart_pin>; + }; + + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + }; + + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_uart_pin>; + }; + + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_pwm_pin>; + }; + + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_pwm_pin>; + }; + + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_pwm_pin>; + }; + + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_spi_pin>; + pinctrl-5 = <&P9_17_i2c_pin>; + pinctrl-6 = <&P9_17_pwm_pin>; + }; + + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_spi_pin>; + pinctrl-5 = <&P9_18_i2c_pin>; + pinctrl-6 = <&P9_18_pwm_pin>; + }; + + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_can_pin>; + pinctrl-5 = <&P9_19_i2c_pin>; + }; + + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_can_pin>; + pinctrl-5 = <&P9_20_i2c_pin>; + }; + + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_spi_pin>; + pinctrl-5 = <&P9_21_uart_pin>; + pinctrl-6 = <&P9_21_i2c_pin>; + pinctrl-7 = <&P9_21_pwm_pin>; + }; + + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_spi_pin>; + pinctrl-5 = <&P9_22_uart_pin>; + pinctrl-6 = <&P9_22_i2c_pin>; + pinctrl-7 = <&P9_22_pwm_pin>; + }; + + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_pwm_pin>; + }; + + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_uart_pin>; + pinctrl-5 = <&P9_24_can_pin>; + pinctrl-6 = <&P9_24_i2c_pin>; + pinctrl-7 = <&P9_24_pruin_pin>; + }; + + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_qep_pin>; + pinctrl-5 = <&P9_25_pruout_pin>; + pinctrl-6 = <&P9_25_pruin_pin>; + pinctrl-7 = <&P9_25_audio_pin>; + }; + + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_uart_pin>; + pinctrl-5 = <&P9_26_can_pin>; + pinctrl-6 = <&P9_26_i2c_pin>; + pinctrl-7 = <&P9_26_pruin_pin>; + }; + + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_qep_pin>; + pinctrl-5 = <&P9_27_pruout_pin>; + pinctrl-6 = <&P9_27_pruin_pin>; + }; + + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pwm2", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_pwm_pin>; + pinctrl-5 = <&P9_28_spi_pin>; + pinctrl-6 = <&P9_28_pwm2_pin>; + pinctrl-7 = <&P9_28_pruout_pin>; + pinctrl-8 = <&P9_28_pruin_pin>; + pinctrl-9 = <&P9_28_audio_pin>; + }; + + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_pwm_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pruout_pin>; + pinctrl-7 = <&P9_29_pruin_pin>; + pinctrl-8 = <&P9_29_audio_pin>; + }; + + P9_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin"; + pinctrl-0 = <&P9_30_default_pin>; + pinctrl-1 = <&P9_30_gpio_pin>; + pinctrl-2 = <&P9_30_gpio_pu_pin>; + pinctrl-3 = <&P9_30_gpio_pd_pin>; + pinctrl-4 = <&P9_30_pwm_pin>; + pinctrl-5 = <&P9_30_spi_pin>; + pinctrl-6 = <&P9_30_pruout_pin>; + pinctrl-7 = <&P9_30_pruin_pin>; + }; + + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_pwm_pin>; + pinctrl-5 = <&P9_31_spi_pin>; + pinctrl-6 = <&P9_31_pruout_pin>; + pinctrl-7 = <&P9_31_pruin_pin>; + pinctrl-8 = <&P9_31_audio_pin>; + }; + + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_timer_pin>; + pinctrl-5 = <&P9_41_pruin_pin>; + }; + + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_qep_pin>; + pinctrl-5 = <&P9_91_pruout_pin>; + pinctrl-6 = <&P9_91_pruin_pin>; + }; + + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "uart", "spics", "spiclk"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_pwm_pin>; + pinctrl-5 = <&P9_42_uart_pin>; + pinctrl-6 = <&P9_42_spics_pin>; + pinctrl-7 = <&P9_42_spiclk_pin>; + }; + + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_qep_pin>; + pinctrl-5 = <&P9_92_pruout_pin>; + pinctrl-6 = <&P9_92_pruin_pin>; + }; + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + P8_14 { + gpio-name = "P8_14"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + P8_17 { + gpio-name = "P8_17"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_26 { + gpio-name = "P8_26"; + gpio = <&gpio1 29 0>; + input; + dir-changeable; + }; + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + P9_30 { + gpio-name = "P9_30"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index dbb3f4d..7f3b2db 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -25,14 +25,14 @@ compatible = "gpio-leds"; led@2 { - label = "beaglebone:green:heartbeat"; + label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { - label = "beaglebone:green:mmc0"; + label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -81,6 +81,13 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ @@ -97,6 +104,8 @@ cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ @@ -116,6 +125,8 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -218,8 +229,67 @@ reg = <0x24>; }; + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + cape_eeprom0: cape_eeprom0@54 { + compatible = "at,24c256"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + cape0_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom1: cape_eeprom1@55 { + compatible = "at,24c256"; + reg = <0x55>; + #address-cells = <1>; + #size-cells = <1>; + cape1_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom2: cape_eeprom2@56 { + compatible = "at,24c256"; + reg = <0x56>; + #address-cells = <1>; + #size-cells = <1>; + cape2_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom3: cape_eeprom3@57 { + compatible = "at,24c256"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + cape3_data: cape_data@0 { + reg = <0 0x100>; + }; + }; }; + /include/ "tps65217.dtsi" &tps { @@ -242,6 +312,9 @@ */ ti,pmic-shutdown-controller; + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + regulators { dcdc1_reg: regulator@0 { regulator-name = "vdds_dpr"; @@ -328,3 +401,28 @@ &sham { status = "okay"; }; + +/* the cape manager */ +/ { + bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cells = <&baseboard_data &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi new file mode 100644 index 0000000..7d8f673 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-emmc-in-reset.dtsi @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* standard */ + +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi new file mode 100644 index 0000000..0961216 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can0.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "can"; + * }; + * P9_20_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.d_can0_tx */ + BONE_P9_20 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_19: uart1_rtsn.d_can0_rx */ + BONE_P9_19 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan0 { + pinctrl-0 = <&dcan0_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi new file mode 100644 index 0000000..9e26413 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-can1.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-can1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "can"; + * }; + * P9_26_pinmux { + * mode = "can"; + * }; + *}; + * + *&dcan1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* P9_26: uart1_rxd.d_can1_tx */ + BONE_P9_26 (PIN_OUTPUT_PULLUP | MUX_MODE2) + /* P9_24: uart1_txd.d_can1_rx */ + BONE_P9_24 (PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; +}; + +&dcan1 { + pinctrl-0 = <&dcan1_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi new file mode 100644 index 0000000..22cf462 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-emmc.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* lsblk */ + +#include +#include "am335x-peripheral-emmc.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_21_pinmux { + * state = "disabled"; + * }; + * P8_20_pinmux { + * state = "disabled"; + * }; + * P8_25_pinmux { + * state = "disabled"; + * }; + * P8_24_pinmux { + * state = "disabled"; + * }; + * P8_05_pinmux { + * state = "disabled"; + * }; + * P8_06_pinmux { + * state = "disabled"; + * }; + * P8_23_pinmux { + * state = "disabled"; + * }; + * P8_22_pinmux { + * state = "disabled"; + * }; + * P8_03_pinmux { + * state = "disabled"; + * }; + * P8_04_pinmux { + * state = "disabled"; + * }; + *}; + * + *&mmc2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + /* P8_21: gpmc_csn1.mmc1_clk */ + BONE_P8_21 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_20: gpmc_csn2.mmc1_cmd */ + BONE_P8_20 (PIN_INPUT_PULLUP | MUX_MODE2) + /* P8_25: gpmc_ad0.mmc1_dat0 */ + BONE_P8_25 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_24: gpmc_ad1.mmc1_dat1 */ + BONE_P8_24 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_05: gpmc_ad2.mmc1_dat2 */ + BONE_P8_05 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_06: gpmc_ad3.mmc1_dat3 */ + BONE_P8_06 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_23: gpmc_ad4.mmc1_dat4 */ + BONE_P8_23 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_22: gpmc_ad5.mmc1_dat5 */ + BONE_P8_22 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_03: gpmc_ad6.mmc1_dat6 */ + BONE_P8_03 (PIN_INPUT_PULLUP | MUX_MODE1) + /* P8_04: gpmc_ad7.mmc1_dat7 */ + BONE_P8_04 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&mmc2 { + pinctrl-0 = <&emmc_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi new file mode 100644 index 0000000..abf3b57 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-i2c2.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-i2c2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_19_pinmux { + * mode = "i2c"; + * }; + * P9_20_pinmux { + * mode = "i2c"; + * }; + *}; + * + *&dcan0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + /* P9_20: uart1_ctsn.i2c2_sda */ + BONE_P9_20 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + /* P9_19: uart1_rtsn.i2c2_scl */ + BONE_P9_19 (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi new file mode 100644 index 0000000..a88d593 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-nxp-hdmi.dtsi @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-nxp-hdmi.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + /* xdma_event_intr0 */ + 0x1B0 (PIN_OUTPUT | MUX_MODE3) + + /* P8_45: lcd_data0.lcd_data0 */ + BONE_P8_45 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_46: lcd_data1.lcd_data1 */ + BONE_P8_46 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_43: lcd_data2.lcd_data2 */ + BONE_P8_43 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_44: lcd_data3.lcd_data3 */ + BONE_P8_44 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_41: lcd_data4.lcd_data4 */ + BONE_P8_41 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_42: lcd_data5.lcd_data5 */ + BONE_P8_42 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_39: lcd_data6.lcd_data6 */ + BONE_P8_39 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_40: lcd_data7.lcd_data7 */ + BONE_P8_40 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_37: lcd_data8.lcd_data8 */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_38: lcd_data9.lcd_data9 */ + BONE_P8_38 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_36: lcd_data10.lcd_data10 */ + BONE_P8_36 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_34: lcd_data11.lcd_data11 */ + BONE_P8_34 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_35: lcd_data12.lcd_data12 */ + BONE_P8_35 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_33: lcd_data13.lcd_data13 */ + BONE_P8_33 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_31: lcd_data14.lcd_data14 */ + BONE_P8_31 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P8_32: lcd_data15.lcd_data15 */ + BONE_P8_32 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + + /* P8_27: lcd_vsync.lcd_vsync */ + BONE_P8_27 (PIN_OUTPUT | MUX_MODE0) + /* P8_29: lcd_hsync.lcd_hsync */ + BONE_P8_29 (PIN_OUTPUT | MUX_MODE0) + /* P8_28: lcd_pclk.lcd_pclk*/ + BONE_P8_28 (PIN_OUTPUT | MUX_MODE0) + /* P8_30: lcd_ac_bias_en.lcd_ac_bias_en */ + BONE_P8_30 (PIN_OUTPUT | MUX_MODE0) + >; + }; + + nxp_hdmi_off_pins: nxp_hdmi_off_pins { + pinctrl-single,pins = < + /* xdma_event_intr0 */ + 0x1B0 (PIN_OUTPUT | MUX_MODE3) + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +/ { + hdmi { + pinctrl-0 = <&nxp_hdmi_pins>; + pinctrl-1 = <&nxp_hdmi_off_pins>; + }; +}; + +//&mcasp0 { +// pinctrl-0 = <&mcasp0_pins>; +//}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..65e5fbb --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-panel-1024x600-24bit.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_27_pinmux { + * state = "disabled"; + * }; + * P8_28_pinmux { + * state = "disabled"; + * }; + * P8_29_pinmux { + * state = "disabled"; + * }; + * P8_30_pinmux { + * state = "disabled"; + * }; + * P8_31_pinmux { + * state = "disabled"; + * }; + * P8_32_pinmux { + * state = "disabled"; + * }; + * P8_33_pinmux { + * state = "disabled"; + * }; + * P8_34_pinmux { + * state = "disabled"; + * }; + * P8_35_pinmux { + * state = "disabled"; + * }; + * P8_36_pinmux { + * state = "disabled"; + * }; + * P8_37_pinmux { + * state = "disabled"; + * }; + * P8_38_pinmux { + * state = "disabled"; + * }; + * P8_39_pinmux { + * state = "disabled"; + * }; + * P8_40_pinmux { + * state = "disabled"; + * }; + * P8_41_pinmux { + * state = "disabled"; + * }; + * P8_42_pinmux { + * state = "disabled"; + * }; + * P8_43_pinmux { + * state = "disabled"; + * }; + * P8_44_pinmux { + * state = "disabled"; + * }; + * P8_45_pinmux { + * state = "disabled"; + * }; + * P8_46_pinmux { + * state = "disabled"; + * }; + *}; + */ + +/* standard */ + +&am33xx_pinmux { + lcd_24bit_pins: pinmux_lcd_24bit_pins { + pinctrl-single,pins = < + + /* P8_45: lcd_data0.lcd_data0 */ + BONE_P8_45 (PIN_OUTPUT | MUX_MODE0) + /* P8_46: lcd_data1.lcd_data1 */ + BONE_P8_46 (PIN_OUTPUT | MUX_MODE0) + /* P8_43: lcd_data2.lcd_data2 */ + BONE_P8_43 (PIN_OUTPUT | MUX_MODE0) + /* P8_44: lcd_data3.lcd_data3 */ + BONE_P8_44 (PIN_OUTPUT | MUX_MODE0) + /* P8_41: lcd_data4.lcd_data4 */ + BONE_P8_41 (PIN_OUTPUT | MUX_MODE0) + /* P8_42: lcd_data5.lcd_data5 */ + BONE_P8_42 (PIN_OUTPUT | MUX_MODE0) + /* P8_39: lcd_data6.lcd_data6 */ + BONE_P8_39 (PIN_OUTPUT | MUX_MODE0) + /* P8_40: lcd_data7.lcd_data7 */ + BONE_P8_40 (PIN_OUTPUT | MUX_MODE0) + /* P8_37: lcd_data8.lcd_data8 */ + BONE_P8_37 (PIN_OUTPUT | MUX_MODE0) + /* P8_38: lcd_data9.lcd_data9 */ + BONE_P8_38 (PIN_OUTPUT | MUX_MODE0) + /* P8_36: lcd_data10.lcd_data10 */ + BONE_P8_36 (PIN_OUTPUT | MUX_MODE0) + /* P8_34: lcd_data11.lcd_data11 */ + BONE_P8_34 (PIN_OUTPUT | MUX_MODE0) + /* P8_35: lcd_data12.lcd_data12 */ + BONE_P8_35 (PIN_OUTPUT | MUX_MODE0) + /* P8_33: lcd_data13.lcd_data13 */ + BONE_P8_33 (PIN_OUTPUT | MUX_MODE0) + /* P8_31: lcd_data14.lcd_data14 */ + BONE_P8_31 (PIN_OUTPUT | MUX_MODE0) + /* P8_32: lcd_data15.lcd_data15 */ + BONE_P8_32 (PIN_OUTPUT | MUX_MODE0) + + /* gpmc_ad15.lcd_data16 */ + BONE_P8_15 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + BONE_P8_16 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + BONE_P8_11 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + BONE_P8_12 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + BONE_P8_17 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + BONE_P8_14 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + BONE_P8_13 (PIN_OUTPUT | MUX_MODE1) + /* gpmc_ad8.lcd_data23 */ + BONE_P8_19 (PIN_OUTPUT | MUX_MODE1) + + /* P8_27: lcd_vsync.lcd_vsync */ + BONE_P8_27 (PIN_OUTPUT | MUX_MODE0) + /* P8_29: lcd_hsync.lcd_hsync */ + BONE_P8_29 (PIN_OUTPUT | MUX_MODE0) + /* P8_28: lcd_pclk.lcd_pclk*/ + BONE_P8_28 (PIN_OUTPUT | MUX_MODE0) + /* P8_30: lcd_ac_bias_en.lcd_ac_bias_en */ + BONE_P8_30 (PIN_OUTPUT | MUX_MODE0) + >; + }; +}; + +/ { + panel { + pinctrl-0 = <&lcd_24bit_pins>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi new file mode 100644 index 0000000..354e66a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi0.dtsi @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi0.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_17_pinmux { + * status = "disabled"; + * }; + * P9_18_pinmux { + * status = "disabled"; + * }; + * P9_21_pinmux { + * status = "disabled"; + * }; + * P9_22_pinmux { + * status = "disabled"; + * }; + *}; + * + *&spi0 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + >; + }; +}; + +&spi0 { + pinctrl-0 = <&spi0_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi new file mode 100644 index 0000000..bff7f8d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1.dtsi @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x190 0x33 /* mcasp0_aclkx.spi1_sclk, INPUT_PULLUP | MODE3 */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */ + // 0x164 0x12 /* eCAP0_in_PWM0_out.spi1_cs1 OUTPUT_PULLUP | MODE2 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi new file mode 100644 index 0000000..62874c8 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-spi1a.dtsi @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include "am335x-peripheral-spi1.dtsi" + +/* standard */ + +&am33xx_pinmux { + spi1a_pins: pinmux_spi1a_pins { + pinctrl-single,pins = < + 0x164 0x34 /* eCAP0_in_PWM0_out.spi1_sclk, INPUT_PULLUP | MODE4 */ + /* NOTE: P9.42 is connected to two pads */ + // 0x1A0 0x27 /* set the other pad to gpio input */ + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ + 0x178 0x14 /* uart1_ctsn.spi1_cs0, OUTPUT_PULLUP | MODE4 */ >; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1a_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi new file mode 100644 index 0000000..ae5b813 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS1.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS1 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS1.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_24_pinmux { + * mode = "uart"; + * }; + * P9_26_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart1 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* P9_24: uart1_txd.uart1_txd */ + BONE_P9_24 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* P9_26: uart1_rxd.uart1_rxd */ + BONE_P9_26 (PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi new file mode 100644 index 0000000..5fa593a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS2.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS2 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS2.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_21_pinmux { + * mode = "uart"; + * }; + * P9_22_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart2 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* P9_21: spi0_d0.uart2_txd */ + BONE_P9_21 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) + /* P9_22: spi0_sclk.uart2_rxd */ + BONE_P9_22 (PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi new file mode 100644 index 0000000..1d22a95 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS4.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS4 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS4.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P9_11_pinmux { + * mode = "uart"; + * }; + * P9_13_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart4 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + /* P9_11: gpmc_wait0.uart4_rxd_mux2 */ + BONE_P9_11 (PIN_INPUT_PULLUP | MUX_MODE6) + /* P9_13: gpmc_wpn.uart4_txd_mux2 */ + BONE_P9_13 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) + >; + }; +}; + +&uart4 { + pinctrl-0 = <&uart4_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi new file mode 100644 index 0000000..01d0aec --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-pinmux-ttyS5.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Testing */ +/* sudo /sbin/getty -L ttyS5 115200 vt102 */ + +#include +#include "am335x-peripheral-ttyS5.dtsi" + +/* cape universal */ + +/* + *&ocp { + * P8_37_pinmux { + * mode = "uart"; + * }; + * P8_38_pinmux { + * mode = "uart"; + * }; + *}; + * + *&uart5 { + * pinctrl-0 = <>; + *}; + * + */ + +/* standard */ + +&am33xx_pinmux { + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + /* P8_38: lcd_data9.uart5_rxd */ + BONE_P8_38 (PIN_INPUT_PULLUP | MUX_MODE4) + /* P8_37: lcd_data8.uart5_txd */ + BONE_P8_37 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) + >; + }; +}; + +&uart5 { + pinctrl-0 = <&uart5_pins>; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-1ghz.dtsi b/arch/arm/boot/dts/am335x-boneblack-1ghz.dtsi new file mode 100644 index 0000000..1fb10a0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-1ghz.dtsi @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 1000000 1325000 + 800000 1300000 + 600000 1112000 + 300000 969000 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-800mhz.dtsi b/arch/arm/boot/dts/am335x-boneblack-800mhz.dtsi new file mode 100644 index 0000000..6d57fd1 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-800mhz.dtsi @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 800000 1300000 + 600000 1112000 + 300000 969000 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts new file mode 100644 index 0000000..8c92446 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-c.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; +}; + +#include "am335x-peripheral-emmc.dtsi" +#include "am335x-bone-pinmux-emmc.dtsi" +/* #include "am335x-bone-emmc-in-reset.dtsi" */ + +/* #include "am335x-peripheral-nxp-hdmi.dtsi" */ +/* #include "am335x-bone-pinmux-nxp-hdmi.dtsi" */ + +&rtc { + system-power-controller; +}; + +#include "am335x-cape-bbb-exp-c.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts new file mode 100644 index 0000000..521ad3b --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-bbb-exp-r.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; +}; + +#include "am335x-peripheral-emmc.dtsi" +#include "am335x-bone-pinmux-emmc.dtsi" +/* #include "am335x-bone-emmc-in-reset.dtsi" */ + +/* #include "am335x-peripheral-nxp-hdmi.dtsi" */ +/* #include "am335x-bone-pinmux-nxp-hdmi.dtsi" */ + +&rtc { + system-power-controller; +}; + +#include "am335x-cape-bbb-exp-r.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack-can0.dts b/arch/arm/boot/dts/am335x-boneblack-can0.dts new file mode 100644 index 0000000..a613db4 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-can0.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; +}; + +#include "am335x-peripheral-emmc.dtsi" +#include "am335x-bone-pinmux-emmc.dtsi" +/* #include "am335x-bone-emmc-in-reset.dtsi" */ + +#include "am335x-peripheral-nxp-hdmi.dtsi" +#include "am335x-bone-pinmux-nxp-hdmi.dtsi" + +&rtc { + system-power-controller; +}; + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +/* #include "am335x-peripheral-can1.dtsi" */ +/* #include "am335x-bone-pinmux-can1.dtsi" */ + +/* #include "am335x-peripheral-i2c2.dtsi" */ +/* #include "am335x-bone-pinmux-i2c2.dtsi" */ + +/* #include "am335x-peripheral-ttyS1.dtsi" */ +/* #include "am335x-bone-pinmux-ttyS1.dtsi" */ + +/* #include "am335x-peripheral-ttyS2.dtsi" */ +/* #include "am335x-bone-pinmux-ttyS2.dtsi" */ + +/* #include "am335x-peripheral-ttyS4.dtsi" */ +/* #include "am335x-bone-pinmux-ttyS4.dtsi" */ + +/* #include "am335x-peripheral-ttyS5.dtsi" */ +/* #include "am335x-bone-pinmux-ttyS5.dtsi" */ diff --git a/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts new file mode 100644 index 0000000..f95ff5d --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-cape-bone-argus.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + /* pinctrl-0 = <&clkout2_pin>; */ +}; + +#include "am335x-peripheral-emmc.dtsi" +#include "am335x-bone-pinmux-emmc.dtsi" +/* #include "am335x-bone-emmc-in-reset.dtsi" */ + +#include "am335x-peripheral-nxp-hdmi.dtsi" +#include "am335x-bone-pinmux-nxp-hdmi.dtsi" + +&rtc { + system-power-controller; +}; + +#include "am335x-bone-argus.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-overlay.dts new file mode 100644 index 0000000..424de00 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-overlay.dts @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-replicape.dts b/arch/arm/boot/dts/am335x-boneblack-replicape.dts new file mode 100644 index 0000000..53371bb --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-replicape.dts @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* xdma_event_intr1.clkout2 */ + >; + }; + +}; + +&lcdc { + status = "okay"; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-universal.dts b/arch/arm/boot/dts/am335x-boneblack-universal.dts new file mode 100644 index 0000000..9af2574 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-universal.dts @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common-no-capemgr.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +#include "am335x-bone-common-universal.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi new file mode 100644 index 0000000..94caa22 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <44>; /* Bank1, pin12 */ + dev_name = "/dev/ttyO4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + mmc2_pins_sleep: pinmux_mmc2_pins_sleep { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + uart4_pins_default: pinmux_uart4_pins_default { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT | MUX_MODE6) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + uart4_pins_sleep: pinmux_uart4_pins_sleep { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wpn.uart4_txd */ + >; + }; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc2_pins &wlan_pins>; + pinctrl-1 = <&mmc2_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart4_pins_default>; + pinctrl-1 = <&uart4_pins_sleep>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts new file mode 100644 index 0000000..edfc2fa --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +#include "am335x-boneblack-wl1835mod-cape.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 901739f..577d67c 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -15,6 +15,10 @@ compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; }; +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + &ldo3_reg { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -80,3 +84,7 @@ status = "okay"; }; }; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts new file mode 100644 index 0000000..8df822a --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +/* Max Core Speed */ +#include "am335x-boneblack-1ghz.dtsi" +/* #include "am335x-boneblack-800mhz.dtsi" */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi new file mode 100644 index 0000000..01f9cde --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-c.dtsi @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + edt_ft5306_ts_pins: pinmux_edt_ft5306_ts_pins { + pinctrl-single,pins = < + /* CAP_TSC gpmc_a1.gpio1_17, INPUT | MODE7 */ + BONE_P9_23 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git a/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi new file mode 100644 index 0000000..539409c --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-bbb-exp-r.dtsi @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#include "am335x-peripheral-can0.dtsi" +#include "am335x-bone-pinmux-can0.dtsi" + +#include "am335x-peripheral-ttyS1.dtsi" +#include "am335x-bone-pinmux-ttyS1.dtsi" + +#include "am335x-peripheral-ttyS2.dtsi" +#include "am335x-bone-pinmux-ttyS2.dtsi" + +#include "am335x-peripheral-ttyS4.dtsi" +#include "am335x-bone-pinmux-ttyS4.dtsi" + +&am33xx_pinmux { + user_leds_s1: user_leds_s1 { + pinctrl-single,pins = < + 0x98 0x7 /* gpmc_wen.gpio2_4, OUTPUT | MODE7 */ + 0x9c 0x7 /* gpmc_ben0_cle.gpio2_5, OUTPUT | MODE7 */ + >; + }; + + bb_lcd_pwm_backlight_pins: pinmux_bb_lcd_pwm_backlight_pins { + pinctrl-single,pins = < + BONE_P9_14 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + >; + }; + + keymap3_pins: pinmux_keymap3_pins { + pinctrl-single,pins = < + 0x040 0x2f /* KEY_UP gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ + 0x04c 0x2f /* KEY_DOWN gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ + 0x078 0x2f /* KEY_RIGHT gpmc_ben1.gpio1_28, INPUT | PULLDIS | MODE7 */ + 0x164 0x2f /* KEY_LEFT ecap0_in_pwm0_out.gpio0_7, INPUT | PULLDIS | MODE7 */ + 0x1a4 0x2f /* KEY_ENTER mcasp0_fxr.gpio3_19, INPUT | PULLDIS | MODE7 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_18 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE2 */ + BONE_P9_17 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) + >; + }; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,pins = < + 0x190 0x20 /* mcasp0_aclkx.mcasp0_aclkx, INPUT | MODE0 */ + 0x194 0x20 /* mcasp0_fsx.mcasp0_fsx, INPUT | MODE0 */ + 0x198 0x20 /* mcasp0_axr0.mcasp0_axr0, INPUT | MODE0 */ + 0x19c 0x22 /* mcasp0_ahclkr.mcasp0_axr2, INPUT | MODE2 */ + >; + }; +}; + +&epwmss1 { + status = "okay"; +}; + + +&ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&bb_lcd_pwm_backlight_pins>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/ { + backlight { + status = "okay"; + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 50000 0>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&keymap3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + linux,code = <105>; + label = "left"; + gpios = <&gpio0 7 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@2 { + debounce_interval = <50>; + linux,code = <106>; + label = "right"; + gpios = <&gpio1 28 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@3 { + debounce_interval = <50>; + linux,code = <103>; + label = "up"; + gpios = <&gpio1 16 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@4 { + debounce_interval = <50>; + linux,code = <108>; + label = "down"; + gpios = <&gpio1 19 0x1>; + gpio-key,wakeup; + autorepeat; + }; + button@5 { + debounce_interval = <50>; + linux,code = <28>; + label = "enter"; + gpios = <&gpio3 19 0x1>; + gpio-key,wakeup; + }; + }; + + gpio-leds-cape-lcd { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pinctrl-0 = <&user_leds_s1>; + + lcd-led0 { + label = "lcd:green:usr0"; + gpios = <&gpio2 4 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + lcd-led1 { + label = "lcd:green:usr1"; + gpios = <&gpio2 5 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack"; + }; +}; + +#include "am335x-peripheral-panel-1024x600-24bit.dtsi" +#include "am335x-bone-pinmux-panel-1024x600-24bit.dtsi" diff --git a/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi new file mode 100644 index 0000000..bce6ac5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-cape-rtc-ds1307.dtsi @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +&am33xx_pinmux { + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + BONE_P9_20 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */ + BONE_P9_19 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + rtc@68 { + compatible = "maxim,ds1307"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-can0.dtsi b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi new file mode 100644 index 0000000..4335e39 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-can1.dtsi b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi new file mode 100644 index 0000000..02b5bd1 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-can1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&dcan1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi new file mode 100644 index 0000000..603f34e --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-emmc.dtsi @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + + bus-width = <8>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi new file mode 100644 index 0000000..ed9a0b5 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-i2c2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&i2c2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi new file mode 100644 index 0000000..acc3f75 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-nxp-hdmi.dtsi @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + + pinctrl-names = "default", "off"; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi new file mode 100644 index 0000000..74ddc12 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-panel-1024x600-24bit.dtsi @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&lcdc { + status = "okay"; +}; + +/ { + panel { + status = "okay"; + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <0>; + raster-order = <1>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 1024x600 { + clock-frequency = <36000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <1>; + hback-porch = <45>; + hsync-len = <30>; + vback-porch = <22>; + vfront-porch = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi new file mode 100644 index 0000000..969e352 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi0.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi0 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi new file mode 100644 index 0000000..ac5fe97 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-spi1a.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&spi1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi new file mode 100644 index 0000000..f59fa4c --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS1.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart1 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi new file mode 100644 index 0000000..a25d6cf --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS2.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart2 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi new file mode 100644 index 0000000..adc89f0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS4.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart4 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi new file mode 100644 index 0000000..8b42fb0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-peripheral-ttyS5.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&uart5 { + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 21fcc44..09532d6 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -90,7 +90,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -441,6 +441,17 @@ ti,timer-pwm; }; + pruss: pruss@4a300000 { + compatible = "ti,pruss-v2"; + ti,hwmods = "pruss"; + ti,deassert-hard-reset = "pruss", "pruss"; + reg = <0x4a300000 0x080000>; + ti,pintc-offset = <0x20000>; + interrupt-parent = <&intc>; + status = "disabled"; + interrupts = <20 21 22 23 24 25 26 27>; + }; + rtc: rtc@44e3e000 { compatible = "ti,am3352-rtc", "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; @@ -637,6 +648,15 @@ ti,hwmods = "ehrpwm0"; status = "disabled"; }; + + eqep0: eqep@0x48300180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48300180 0x80>; + interrupt-parent = <&intc>; + interrupts = <79>; + ti,hwmods = "eqep0"; + status = "disabled"; + }; }; epwmss1: epwmss@48302000 { @@ -667,6 +687,15 @@ ti,hwmods = "ehrpwm1"; status = "disabled"; }; + + eqep1: eqep@0x48302180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48302180 0x80>; + interrupt-parent = <&intc>; + interrupts = <88>; + ti,hwmods = "eqep1"; + status = "disabled"; + }; }; epwmss2: epwmss@48304000 { @@ -697,6 +726,15 @@ ti,hwmods = "ehrpwm2"; status = "disabled"; }; + + eqep2: eqep@0x48304180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48304180 0x80>; + interrupt-parent = <&intc>; + interrupts = <89>; + ti,hwmods = "eqep2"; + status = "disabled"; + }; }; mac: ethernet@4a100000 { diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 1f55187..53fd75c 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -228,10 +228,11 @@ >; }; + /* open drain */ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 - MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 + MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec + MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec >; }; @@ -295,9 +296,10 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync>; + ddc-i2c-bus = <&i2c2>; fsl,tve-mode = "vga"; - fsl,hsync-pin = <4>; - fsl,vsync-pin = <6>; + fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */ + fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 82d623d..66e47de 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -20,15 +20,7 @@ }; &iomuxc { - i2c1 { - /* open drain */ - pinctrl_i2c1_qsrb: i2c1grp-1 { - fsl,pins = < - MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec - MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec - >; - }; - + imx53-qsrb { pinctrl_pmic: pmicgrp { fsl,pins = < MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ @@ -38,10 +30,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_qsrb>; - status = "okay"; - pmic: mc34708@8 { compatible = "fsl,mc34708"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts new file mode 100644 index 0000000..37721c1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-sabresd-wl1835.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sabresd-wl1835.dtsi" + +/ { + model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; + compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6q-ccimx6sbc.dts b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts new file mode 100644 index 0000000..d249240 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ccimx6sbc.dts @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2015 Robert Nelson (robertcnelson@gmail.com) + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include + +/ { + model = "Digi ConnectCore-i.MX6 SBC Board"; + compatible = "digi,connectcore/q", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_reset: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usbh1_reset"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <17 0x8>; /* active-low GPIO0_17 */ + + regulators { + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-ccimx6sbc { + pinctrl_hog: hoggrp { + fsl,pins = < + /* da9063*/ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* need to force low for hub reset */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x10b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_reset>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + broken-cd; /* cd & wp, is not wired up on this board */ + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts new file mode 100644 index 0000000..d88d9e2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabresd-wl1835.dts @@ -0,0 +1,25 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-sabresd-wl1835.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Smart Device Board"; + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi new file mode 100644 index 0000000..862dfbd --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabresd-wl1835.dtsi @@ -0,0 +1,646 @@ +/* Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include + +/ { + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_audio: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply"; + gpio = <&gpio4 10 0>; + enable-active-high; + }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; + + wlan_en_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO for this board – Bank4, pin7 */ + gpio = <&gpio4 7 0>; + enable-active-high; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + }; + + sound { + compatible = "fsl,imx6q-sabresd-wm8962", + "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + +/* red_led gpio gpio1_2 is used for bt_enable + red { + gpios = <&gpio1 2 0>; + default-state = "on"; + }; +*/ + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <2>; + dev_name = "/dev/ttymxc4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +/* +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 9 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; +*/ + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 0>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio6>; + interrupts = <7 2>; + wakeup-gpios = <&gpio6 7 0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-sabresd { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x13059 // reserve two pins wl8 gpio, this is pulled low at reset for WL_EN + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x13059 // this is for WL_IRQ which driver will configure as an input with a pull down + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x1b0b1 + MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 0>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { + compatible = "fsl,imx21-uart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + /* enable rts/cts usage on uart5 */ + fsl,uart-has-rtscts; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; +/* cd-gpios = <&gpio2 2 0>; */ + wp-gpios = <&gpio2 3 0>; + no-1-8-v; + vmmc-supply = <&wlan_en_reg>; + non-removable; /* non-removable is not a variable, the fact it is */ + /* listed is all that is used by driver */ + cap-power-off-card; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index ef7fa62..b5d0f58 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio3 13 0>; + bluetooth-wake = <&gpio3 14 0>; + bluetooth-host-wake = <&gpio3 15 0>; + + wifi-ref-on = <&gpio2 29 0>; + wifi-rst-n = <&gpio5 2 0>; + wifi-reg-on = <&gpio1 26 0>; + wifi-host-wake = <&gpio1 29 0>; + wifi-wake = <&gpio1 30 0>; + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; @@ -37,6 +55,5 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 8d893a7..b2097ef 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -11,6 +11,24 @@ #include "imx6qdl-wandboard.dtsi" +/ { + rfkill { + compatible = "wand,imx6qdl-wandboard-rfkill"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + bluetooth-on = <&gpio5 21 0>; + bluetooth-wake = <&gpio5 30 0>; + bluetooth-host-wake = <&gpio5 20 0>; + + wifi-ref-on = <&gpio5 31 0>; /* Wifi Power Enable */ + wifi-rst-n = <&gpio6 0 0>; /* WIFI_ON reset */ + wifi-reg-on = <&gpio1 26 0>; /* WL_REG_ON */ + wifi-host-wake = <&gpio1 29 0>; /* WL_HOST_WAKE */ + wifi-wake = <&gpio1 30 0>; /* WL_WAKE */ + }; +}; + &iomuxc { pinctrl-0 = <&pinctrl_hog>; diff --git a/arch/arm/boot/dts/imx6sl-evk-wl1835.dts b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts new file mode 100644 index 0000000..e5853f3 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-evk-wl1835.dts @@ -0,0 +1,633 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sl.dtsi" + +/ { + model = "Freescale i.MX6 SoloLite EVK Board"; + compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_aud3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; + + wlan_en_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO for this board – Bank5, pin13 */ + gpio = <&gpio5 13 0>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <134>; // GPIO5_6 The wl8 driver expects gpio to be an integer, so gpio5_6 is (5-1)*32+6=134 + dev_name = "/dev/ttymxc3"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 11 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6sl-evk { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 + MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 + MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x13059 // reserve two pins from sd1 for wl8 gpio, this is pulled low at reset for WL_EN + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x13059 // this is for wl_irq which driver will configure as an input with a pull down + >; + }; + + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 + MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 + MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 + MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 + MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 + MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 + MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 + >; + }; + + pinctrl_fec_sleep: fecgrp-sleep { + fsl,pins = < + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 + MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010 + MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0 + MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0 + MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0 + MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x13059 // used for HOST_HCI_RX + MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x13059 // used for HOST_HCI_TX + MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x13059 // used for HOST_HCI_RTS, note reversed to TI nomenclature + MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x13059 // used for HOST_HCI_CTS + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x13059 // used for BT_EN + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) /* ROW0, COL0 */ + MATRIX_KEY(0x0, 0x1, KEY_DOWN) /* ROW0, COL1 */ + MATRIX_KEY(0x0, 0x2, KEY_ENTER) /* ROW0, COL2 */ + MATRIX_KEY(0x1, 0x0, KEY_HOME) /* ROW1, COL0 */ + MATRIX_KEY(0x1, 0x1, KEY_RIGHT) /* ROW1, COL1 */ + MATRIX_KEY(0x1, 0x2, KEY_LEFT) /* ROW1, COL2 */ + MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */ + MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */ + >; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + compatible = "fsl,imx21-uart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; + + /* enable rts/cts usage on uart4 */ + fsl,uart-has-rtscts; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio5 0 0>; + wp-gpios = <&gpio4 29 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&wlan_en_reg>; + non-removable; // non-removable is not a variable, the fact it is listed is all that is used by driver + cap-power-off-card; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 7c4dca1..b0b8602 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -93,7 +93,7 @@ tfp410: encoder@0 { compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + /* powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; */ /* XXX pinctrl from twl */ @@ -173,6 +173,10 @@ }; }; +&dpll2_ck { + ti,omap3630-dpll-usb-clock-errata; +}; + &omap3_pmx_wkup { gpio1_pins: pinmux_gpio1_pins { pinctrl-single,pins = < @@ -205,6 +209,25 @@ >; }; + spi3_pins: pinmux_spi3_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT | MUX_MODE1) /* sdmmc2_clk.mcspi3_clk gpio_130 */ + 0x12a (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_cmd.mcspi3_simo gpio_131 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0.mcspi3_somi gpio_132 */ + 0x130 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat2.mcspi3_cs1 gpio_134 */ + 0x132 (PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat3.mcspi3_cs0 gpio_135 */ + >; + }; + + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT | MUX_MODE1) /* mcbsp1_clkr.mcspi4_clk gpio_156 */ + 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_dx.mcspi4_simo gpio_158 */ + 0x162 (PIN_INPUT_PULLUP | MUX_MODE1) /* mcbsp1_dr.mcspi4_somi gpio_159 */ + 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcbsp1_fsx.mcspi4_cs0 gpio_161 */ + >; + }; + hsusb2_pins: pinmux_hsusb2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ @@ -277,11 +300,6 @@ codec { }; }; - - twl_power: power { - compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; - ti,use_poweroff; - }; }; }; @@ -310,16 +328,46 @@ status = "disabled"; }; +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <48000000>; + }; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + status = "okay"; + + spidev2: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <48000000>; + }; +}; + &twl_gpio { ti,use-leds; - /* pullups: BIT(1) */ - ti,pullups = <0x000002>; + /* pullups: BIT(1), BIT(2) */ + ti,pullups = <0x000006>; /* * pulldowns: - * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(6), BIT(7), BIT(8), BIT(13) * BIT(15), BIT(16), BIT(17) */ - ti,pulldowns = <0x03a1c4>; + ti,pulldowns = <0x03a1c0>; }; &usb_otg_hs { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 67659a0..18b178b 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -271,9 +271,18 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; }; }; +&i2c2 { + clock-frequency = <400000>; +}; + #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 133f1b7..072f0a0 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -10,6 +10,18 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index f1507bc..a644bec 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -460,16 +460,6 @@ }; }; -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - &mcbsp1 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp1_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-es-b3.dts b/arch/arm/boot/dts/omap4-panda-es-b3.dts new file mode 100644 index 0000000..2f1dabc --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-es-b3.dts @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4460.dtsi" +#include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; +}; + +&omap4_pmx_core { + led_gpio_pins: gpio_led_pmx { + pinctrl-single,pins = < + 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + >; + }; +}; + +&led_wkgpio_pins { + pinctrl-single,pins = < + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; +}; + +&leds { + pinctrl-0 = < + &led_gpio_pins + &led_wkgpio_pins + >; + + heartbeat { + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + }; + mmc { + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&gpio1 { + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 2f1dabc..206b523 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -15,6 +15,18 @@ compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; }; +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES"; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index a0e28b2..3ee41ef 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -14,3 +14,15 @@ model = "TI OMAP4 PandaBoard"; compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; + status = "ok"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index dac86ed..b68af5c 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -501,11 +501,13 @@ &emif1 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &emif2 { cs1-used; device-handle = <&elpida_ECB240ABACN>; + status = "ok"; }; &keypad { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 84be9da..99a7ddc 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -678,6 +678,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; emif2: emif@4d000000 { @@ -690,6 +691,7 @@ hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; + status = "disabled"; }; ocp2scp@4a0ad000 { diff --git a/arch/arm/configs/rcn-ee_defconfig b/arch/arm/configs/rcn-ee_defconfig new file mode 100644 index 0000000..76b790c --- /dev/null +++ b/arch/arm/configs/rcn-ee_defconfig @@ -0,0 +1,6130 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm 4.1.13 Kernel Configuration +# +CONFIG_ARM=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_ARM_DMA_USE_IOMMU=y +CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_BANDGAP=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_GENERIC_BUG=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_LZMA is not set +CONFIG_KERNEL_XZ=y +# CONFIG_KERNEL_LZO is not set +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +CONFIG_USELIB=y +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_HANDLE_DOMAIN_IRQ=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +CONFIG_SRCU=y +# CONFIG_TASKS_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_RCU_USER_QS is not set +CONFIG_RCU_FANOUT=32 +CONFIG_RCU_FANOUT_LEAF=16 +# CONFIG_RCU_FANOUT_EXACT is not set +CONFIG_RCU_FAST_NO_HZ=y +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_RCU_KTHREAD_PRIO=0 +# CONFIG_RCU_NOCB_CPU is not set +# CONFIG_RCU_EXPEDITE_BOOT is not set +CONFIG_BUILD_BIN2C=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +# CONFIG_MEMCG_SWAP_ENABLED is not set +# CONFIG_MEMCG_KMEM is not set +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_BPF=y +CONFIG_EXPERT=y +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_BPF_SYSCALL=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_SYSTEM_TRUSTED_KEYRING is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_OPTPROBES=y +CONFIG_UPROBES=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR_NONE is not set +CONFIG_CC_STACKPROTECTOR_REGULAR=y +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OLD_SIGACTION=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_AIX_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_CMDLINE_PARTITION is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PADATA=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_LPC32XX is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_SHMOBILE_LEGACY is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C24XX is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP1 is not set + +# +# Multiple platform selection +# + +# +# CPU Core family selection +# +# CONFIG_ARCH_MULTI_V6 is not set +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MULTI_V6_V7=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +# CONFIG_ARCH_VIRT is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCM is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_DIGICOLOR is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_KEYSTONE is not set +# CONFIG_ARCH_MESON is not set +CONFIG_ARCH_MXC=y +CONFIG_MXC_TZIC=y +CONFIG_HAVE_IMX_ANATOP=y +CONFIG_HAVE_IMX_GPC=y +CONFIG_HAVE_IMX_MMDC=y +CONFIG_HAVE_IMX_SRC=y + +# +# Device tree only +# +CONFIG_SOC_IMX5=y +CONFIG_SOC_IMX50=y +CONFIG_SOC_IMX51=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SX=y +CONFIG_SOC_VF610=y +CONFIG_VF_USE_ARM_GLOBAL_TIMER=y +# CONFIG_VF_USE_PIT_TIMER is not set +CONFIG_SOC_LS1021A=y +CONFIG_WAND_RFKILL=y +# CONFIG_ARCH_MEDIATEK is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Common Features +# + +# +# OMAP Feature Selections +# +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_32K_TIMER=y +# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_PM_NOOP=y +CONFIG_MACH_OMAP_GENERIC=y + +# +# TI OMAP/AM/DM/DRA Family +# +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y +CONFIG_ARCH_OMAP2PLUS=y + +# +# TI OMAP2/3/4 Specific Features +# +CONFIG_ARCH_OMAP2PLUS_TYPICAL=y +CONFIG_SOC_HAS_OMAP2_SDRC=y +CONFIG_SOC_HAS_REALTIME_COUNTER=y +CONFIG_SOC_OMAP3430=y +CONFIG_SOC_TI81XX=y + +# +# OMAP Legacy Platform Data Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP3530_LV_SOM is not set +# CONFIG_MACH_OMAP3_TORPEDO is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_OMAP3_SDRC_AC_TIMING is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_SOCFPGA is not set +# CONFIG_PLAT_SPEAR is not set +# CONFIG_ARCH_STI is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_SHMOBILE_MULTI is not set +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN4I=y +CONFIG_MACH_SUN5I=y +CONFIG_MACH_SUN6I=y +CONFIG_MACH_SUN7I=y +CONFIG_MACH_SUN8I=y +CONFIG_MACH_SUN9I=y +# CONFIG_ARCH_SIRF is not set +CONFIG_ARCH_TEGRA=y +# CONFIG_ARCH_TEGRA_2x_SOC is not set +# CONFIG_ARCH_TEGRA_3x_SOC is not set +# CONFIG_ARCH_TEGRA_114_SOC is not set +CONFIG_ARCH_TEGRA_124_SOC=y +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_WM8850 is not set +# CONFIG_ARCH_ZYNQ is not set +CONFIG_ARCH_SUPPORTS_FIRMWARE=y +CONFIG_ARCH_SUPPORTS_TRUSTED_FOUNDATIONS=y + +# +# Firmware options +# +CONFIG_TRUSTED_FOUNDATIONS=y + +# +# Processor Type +# +CONFIG_CPU_V7=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_LPAE is not set +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_SWP_EMULATE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_KUSER_HELPERS=y +CONFIG_VDSO=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_CACHE_L2X0=y +CONFIG_PL310_ERRATA_588369=y +CONFIG_PL310_ERRATA_727915=y +# CONFIG_PL310_ERRATA_753970 is not set +CONFIG_PL310_ERRATA_769419=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +# CONFIG_ARM_KERNMEM_PERMS is not set +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_643719=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +# CONFIG_ARM_ERRATA_754327 is not set +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_ERRATA_798181=y +# CONFIG_ARM_ERRATA_773022 is not set +CONFIG_TI_PRIV_EDMA=y + +# +# Bus support +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS_GENERIC is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_HAVE_SMP=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_ARM_CPU_TOPOLOGY=y +# CONFIG_SCHED_MC is not set +# CONFIG_SCHED_SMT is not set +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_HAVE_ARM_TWD=y +# CONFIG_MCPM is not set +# CONFIG_BIG_LITTLE is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_NR_CPUS=4 +CONFIG_HOTPLUG_CPU=y +CONFIG_ARM_PSCI=y +CONFIG_ARCH_NR_GPIO=1024 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_HZ_FIXED=0 +CONFIG_HZ_100=y +# CONFIG_HZ_200 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_500 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_CLEANCACHE is not set +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +CONFIG_ZSWAP=y +CONFIG_ZPOOL=y +CONFIG_ZBUD=y +CONFIG_ZSMALLOC=y +# CONFIG_PGTABLE_MAPPING is not set +# CONFIG_ZSMALLOC_STAT is not set +CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set +CONFIG_SECCOMP=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +# CONFIG_XEN is not set + +# +# Boot options +# +CONFIG_USE_OF=y +CONFIG_ATAGS=y +# CONFIG_DEPRECATED_PARAM_STRUCT is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_ARM_APPENDED_DTB is not set +CONFIG_CMDLINE="" +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_AUTO_ZRELADDR=y + +# +# CPU Power Management +# + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_ARM_IMX6Q_CPUFREQ=y +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set +CONFIG_ARM_TEGRA_CPUFREQ=y +# CONFIG_QORIQ_CPUFREQ is not set + +# +# CPU Idle +# +# CONFIG_CPU_IDLE is not set +CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_AUTOSLEEP=y +CONFIG_PM_WAKELOCKS=y +CONFIG_PM_WAKELOCKS_LIMIT=100 +CONFIG_PM_WAKELOCKS_GC=y +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +CONFIG_APM_EMULATION=y +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM=y +CONFIG_XFRM_ALGO=m +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_NET_UDP_TUNNEL=m +CONFIG_NET_FOU=m +CONFIG_NET_FOU_IP_TUNNELS=y +CONFIG_GENEVE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_ACCT=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_QUEUE_CT=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_REDIRECT=m +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_INET=m +CONFIG_NFT_EXTHDR=m +CONFIG_NFT_META=m +CONFIG_NFT_CT=m +CONFIG_NFT_RBTREE=m +CONFIG_NFT_HASH=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_L2TP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_NF_TABLES_IPV4=m +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NF_TABLES_ARP=m +CONFIG_NF_LOG_ARP=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NF_TABLES_IPV6=m +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_NET_DCCPPROBE=m +CONFIG_IP_SCTP=m +CONFIG_NET_SCTPPROBE=m +# CONFIG_SCTP_DBG_OBJCNT is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set +CONFIG_TIPC=m +CONFIG_TIPC_MEDIA_UDP=y +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +CONFIG_PHONET=m +CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_NHC=m +CONFIG_6LOWPAN_NHC_DEST=m +CONFIG_6LOWPAN_NHC_FRAGMENT=m +CONFIG_6LOWPAN_NHC_HOP=m +CONFIG_6LOWPAN_NHC_IPV6=m +CONFIG_6LOWPAN_NHC_MOBILITY=m +CONFIG_6LOWPAN_NHC_ROUTING=m +CONFIG_6LOWPAN_NHC_UDP=m +CONFIG_IEEE802154=m +CONFIG_IEEE802154_SOCKET=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_MAC802154=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=m +CONFIG_NET_CLS_BPF=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_EMATCH_CANID=m +CONFIG_NET_EMATCH_IPSET=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +CONFIG_NET_ACT_CONNMARK=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_BLA=y +CONFIG_BATMAN_ADV_DAT=y +CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y +# CONFIG_BATMAN_ADV_DEBUG is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=m +CONFIG_OPENVSWITCH_VXLAN=m +CONFIG_OPENVSWITCH_GENEVE=m +# CONFIG_VSOCKETS is not set +CONFIG_NETLINK_MMAP=y +CONFIG_NETLINK_DIAG=m +CONFIG_MPLS=y +CONFIG_NET_MPLS_GSO=y +# CONFIG_MPLS_ROUTING is not set +CONFIG_HSR=m +# CONFIG_NET_SWITCHDEV is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_NET_TCPPROBE is not set +CONFIG_NET_DROP_MONITOR=m +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +CONFIG_CAN_SLCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +# CONFIG_CAN_LEDS is not set +# CONFIG_CAN_TI_HECC is not set +# CONFIG_CAN_FLEXCAN is not set +# CONFIG_CAN_GRCAN is not set +# CONFIG_CAN_RCAR is not set +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_ISA=m +# CONFIG_CAN_SJA1000_PLATFORM is not set +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_CC770 is not set + +# +# CAN SPI interfaces +# +CONFIG_CAN_MCP251X=m + +# +# CAN USB interfaces +# +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_GS_USB=m +CONFIG_CAN_KVASER_USB=m +CONFIG_CAN_PEAK_USB=m +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_SOFTING=m +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_LE=y +CONFIG_BT_6LOWPAN=m +# CONFIG_BT_SELFTEST is not set +CONFIG_BT_DEBUGFS=y + +# +# Bluetooth device drivers +# +CONFIG_BT_INTEL=m +CONFIG_BT_BCM=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_BCM=y +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y +# CONFIG_BT_HCIUART_INTEL is not set +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +# CONFIG_BT_HCIVHCI is not set +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +CONFIG_BT_WILINK=m +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +CONFIG_RXKAD=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_CERTIFICATION_ONUS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +CONFIG_RFKILL=y +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=m +CONFIG_NET_9P_VIRTIO=m +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set +CONFIG_NFC=m +CONFIG_NFC_DIGITAL=m +CONFIG_NFC_NCI=m +CONFIG_NFC_NCI_SPI=y +CONFIG_NFC_HCI=m +CONFIG_NFC_SHDLC=y + +# +# Near Field Communication (NFC) devices +# +CONFIG_NFC_PN533=m +CONFIG_NFC_WILINK=m +# CONFIG_NFC_TRF7970A is not set +CONFIG_NFC_SIM=m +CONFIG_NFC_PORT100=m +CONFIG_NFC_PN544=m +CONFIG_NFC_PN544_I2C=m +CONFIG_NFC_MICROREAD=m +CONFIG_NFC_MICROREAD_I2C=m +# CONFIG_NFC_MRVL is not set +# CONFIG_NFC_ST21NFCA is not set +# CONFIG_NFC_ST21NFCB is not set +# CONFIG_NFC_NXP_NCI is not set +CONFIG_HAVE_BPF_JIT=y + +# +# Device Drivers +# +CONFIG_ARM_AMBA=y +CONFIG_TEGRA_AHB=y + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +# +# Bus devices +# +CONFIG_ARM_CCI=y +CONFIG_ARM_CCI400_COMMON=y +CONFIG_ARM_CCI400_PMU=y +# CONFIG_ARM_CCN is not set +# CONFIG_BRCMSTB_GISB_ARB is not set +# CONFIG_IMX_WEIM is not set +CONFIG_OMAP_INTERCONNECT=y +CONFIG_OMAP_OCP2SCP=y +# CONFIG_VEXPRESS_CONFIG is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_AR7_PARTS=m + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +CONFIG_RFD_FTL=m +CONFIG_SSFDC=m +# CONFIG_SM_FTL is not set +CONFIG_MTD_OOPS=m +CONFIG_MTD_SWAP=m +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=m +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MTD_PLATRAM=m + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=m +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=m +CONFIG_MTD_SST25L=m +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_BCH=y +CONFIG_MTD_NAND_ECC_BCH=y +# CONFIG_MTD_SM_COMMON is not set +# CONFIG_MTD_NAND_DENALI is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=m +# CONFIG_MTD_NAND_OMAP_BCH is not set +# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_DOCG4 is not set +CONFIG_MTD_NAND_NANDSIM=m +CONFIG_MTD_NAND_GPMI_NAND=m +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=m +CONFIG_MTD_NAND_SUNXI=m +# CONFIG_MTD_NAND_HISI504 is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=m +# CONFIG_MTD_ONENAND_OTP is not set +CONFIG_MTD_ONENAND_2X_PROGRAM=y + +# +# LPDDR & LPDDR2 PCM memory drivers +# +CONFIG_MTD_LPDDR=m +CONFIG_MTD_QINFO_PROBE=m +# CONFIG_MTD_LPDDR2_NVM is not set +CONFIG_MTD_SPI_NOR=m +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_SPI_FSL_QUADSPI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_BLOCK=y +CONFIG_DTC=y +CONFIG_OF=y + +# +# Device Tree and Open Firmware support +# +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_RESOLVE=y +CONFIG_OF_OVERLAY=y +CONFIG_OF_CONFIGFS=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +CONFIG_ZRAM=m +CONFIG_ZRAM_LZ4_COMPRESS=y +# CONFIG_ZRAM_DEBUG is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_PMEM is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_MG_DISK is not set +CONFIG_VIRTIO_BLK=m +CONFIG_BLK_DEV_RBD=m + +# +# Misc devices +# +CONFIG_SENSORS_LIS3LV02D=m +CONFIG_AD525X_DPOT=m +CONFIG_AD525X_DPOT_I2C=m +CONFIG_AD525X_DPOT_SPI=m +# CONFIG_DUMMY_IRQ is not set +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1780=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +CONFIG_HMC6352=m +CONFIG_DS1682=m +CONFIG_TI_DAC7512=m +# CONFIG_BMP085_I2C is not set +# CONFIG_BMP085_SPI is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_BONE_CAPEMGR=y +# CONFIG_DEV_OVERLAYMGR is not set +CONFIG_TIEQEP=m +CONFIG_C2PORT=m + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +CONFIG_EEPROM_93XX46=m + +# +# Texas Instruments shared transport line discipline +# +CONFIG_TI_ST=m +CONFIG_SENSORS_LIS3_SPI=m +CONFIG_SENSORS_LIS3_I2C=m + +# +# Altera FPGA firmware download module +# +CONFIG_ALTERA_STAPL=m + +# +# Intel MIC Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# Argus cape driver for beaglebone black +# +CONFIG_CAPE_BONE_ARGUS=y +# CONFIG_BEAGLEBONE_PINMUX_HELPER is not set +# CONFIG_ECHO is not set +# CONFIG_CXL_BASE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_NETLINK=y +# CONFIG_SCSI_MQ_DEFAULT is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +CONFIG_SCSI_UFSHCD=m +# CONFIG_SCSI_UFSHCD_PLATFORM is not set +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +# CONFIG_SCSI_DEBUG is not set +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_IMX=y +CONFIG_AHCI_SUNXI=y +CONFIG_AHCI_TEGRA=y +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# + +# +# PATA SFF controllers with BMDMA +# +CONFIG_PATA_IMX=y + +# +# PIO-only SFF controllers +# +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y + +# +# Generic fallback / legacy drivers +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +# CONFIG_MD_CLUSTER is not set +CONFIG_BCACHE=m +# CONFIG_BCACHE_DEBUG is not set +# CONFIG_BCACHE_CLOSURES_DEBUG is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_MQ_DEFAULT is not set +# CONFIG_DM_DEBUG is not set +CONFIG_DM_BUFIO=m +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_CACHE_MQ=m +CONFIG_DM_CACHE_CLEANER=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +# CONFIG_DM_LOG_WRITES is not set +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +# CONFIG_TCM_USER2 is not set +CONFIG_LOOPBACK_TARGET=m +CONFIG_TCM_FC=m +CONFIG_ISCSI_TARGET=m +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_IPVLAN=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_ATM_DRIVERS=y +CONFIG_ATM_DUMMY=m +# CONFIG_ATM_TCP is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_ALLWINNER=y +CONFIG_SUN4I_EMAC=y +# CONFIG_ALTERA_TSE is not set +# CONFIG_NET_VENDOR_ARC is not set +CONFIG_NET_CADENCE=y +# CONFIG_MACB is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_SYSTEMPORT is not set +CONFIG_NET_VENDOR_CIRRUS=y +# CONFIG_CS89x0 is not set +# CONFIG_DM9000 is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_FARADAY=y +# CONFIG_FTMAC100 is not set +# CONFIG_FTGMAC100 is not set +CONFIG_NET_VENDOR_FREESCALE=y +CONFIG_FEC=y +# CONFIG_FSL_PQ_MDIO is not set +# CONFIG_FSL_XGMAC_MDIO is not set +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_NET_VENDOR_INTEL=y +CONFIG_NET_VENDOR_I825XX=y +CONFIG_NET_VENDOR_MARVELL=y +# CONFIG_MVMDIO is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +CONFIG_KS8851=m +# CONFIG_KS8851_MLL is not set +CONFIG_NET_VENDOR_MICROCHIP=y +CONFIG_ENC28J60=m +# CONFIG_ENC28J60_WRITEVERIFY is not set +CONFIG_NET_VENDOR_NATSEMI=y +CONFIG_NET_VENDOR_8390=y +# CONFIG_AX88796 is not set +# CONFIG_ETHOC is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_ROCKER is not set +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SMSC=y +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_NET_VENDOR_TI=y +CONFIG_TI_DAVINCI_EMAC=y +CONFIG_TI_DAVINCI_MDIO=y +CONFIG_TI_DAVINCI_CPDMA=y +CONFIG_TI_CPSW_PHY_SEL=y +CONFIG_TI_CPSW_ALE=y +CONFIG_TI_CPSW=y +CONFIG_TI_CPTS=y +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_AT803X_PHY=m +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=m +# CONFIG_BCM7XXX_PHY is not set +CONFIG_BCM87XX_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=m +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_MDIO_SUN4I=y +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +# CONFIG_MICREL_KS8995MA is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9700=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_WLAN=y +CONFIG_LIBERTAS_THINFIRM=m +# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_AT76C50X_USB=m +CONFIG_USB_ZD1201=m +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y +CONFIG_MAC80211_HWSIM=m +CONFIG_ATH_COMMON=m +CONFIG_ATH_CARDS=m +# CONFIG_ATH_DEBUG is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K_BTCOEX_SUPPORT=y +CONFIG_ATH9K=m +# CONFIG_ATH9K_AHB is not set +# CONFIG_ATH9K_DEBUGFS is not set +# CONFIG_ATH9K_DYNACK is not set +# CONFIG_ATH9K_WOW is not set +CONFIG_ATH9K_RFKILL=y +# CONFIG_ATH9K_CHANNEL_CONTEXT is not set +CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_HTC=m +# CONFIG_ATH9K_HTC_DEBUGFS is not set +CONFIG_CARL9170=m +CONFIG_CARL9170_LEDS=y +CONFIG_CARL9170_WPC=y +# CONFIG_CARL9170_HWRNG is not set +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m +CONFIG_ATH6KL_USB=m +# CONFIG_ATH6KL_DEBUG is not set +# CONFIG_ATH6KL_TRACING is not set +CONFIG_AR5523=m +CONFIG_ATH10K=m +# CONFIG_ATH10K_DEBUG is not set +# CONFIG_ATH10K_DEBUGFS is not set +# CONFIG_ATH10K_TRACING is not set +CONFIG_WCN36XX=m +# CONFIG_WCN36XX_DEBUGFS is not set +CONFIG_B43=m +CONFIG_B43_BCMA=y +CONFIG_B43_SSB=y +CONFIG_B43_BUSES_BCMA_AND_SSB=y +# CONFIG_B43_BUSES_BCMA is not set +# CONFIG_B43_BUSES_SSB is not set +CONFIG_B43_SDIO=y +CONFIG_B43_BCMA_PIO=y +CONFIG_B43_PIO=y +CONFIG_B43_PHY_G=y +CONFIG_B43_PHY_N=y +CONFIG_B43_PHY_LP=y +CONFIG_B43_PHY_HT=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_HWRNG=y +CONFIG_B43LEGACY_DEBUG=y +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMSMAC=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_SDIO=y +CONFIG_BRCMFMAC_USB=y +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_LIBERTAS_MESH=y +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +# CONFIG_P54_SPI is not set +CONFIG_P54_LEDS=y +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +# CONFIG_RT2800USB_UNKNOWN is not set +CONFIG_RT2800_LIB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WL_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_RTL_CARDS=m +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTLWIFI_USB=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192C_COMMON=m +CONFIG_WL_TI=y +CONFIG_WL1251=m +CONFIG_WL1251_SPI=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m +# CONFIG_CW1200 is not set +CONFIG_RSI_91X=m +CONFIG_RSI_DEBUGFS=y +# CONFIG_RSI_SDIO is not set +CONFIG_RSI_USB=m + +# +# WiMAX Wireless Broadband devices +# +CONFIG_WIMAX_I2400M=m +CONFIG_WIMAX_I2400M_USB=m +CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 +# CONFIG_WAN is not set +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKELB=m +CONFIG_IEEE802154_AT86RF230=m +CONFIG_IEEE802154_MRF24J40=m +CONFIG_IEEE802154_CC2520=m +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m +CONFIG_INPUT_MATRIXKMAP=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5588=m +CONFIG_KEYBOARD_ADP5589=m +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_LKKBD=m +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_GPIO_POLLED=m +CONFIG_KEYBOARD_TCA6416=m +CONFIG_KEYBOARD_TCA8418=m +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_LM8333=m +CONFIG_KEYBOARD_MAX7359=m +CONFIG_KEYBOARD_MCS=m +CONFIG_KEYBOARD_MPR121=m +CONFIG_KEYBOARD_IMX=m +CONFIG_KEYBOARD_NEWTON=m +CONFIG_KEYBOARD_TEGRA=m +CONFIG_KEYBOARD_OPENCORES=m +CONFIG_KEYBOARD_SAMSUNG=m +CONFIG_KEYBOARD_STOWAWAY=m +CONFIG_KEYBOARD_SUNKBD=m +CONFIG_KEYBOARD_SUN4I_LRADC=m +CONFIG_KEYBOARD_OMAP4=m +CONFIG_KEYBOARD_TWL4030=m +CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_CAP11XX=m +CONFIG_KEYBOARD_BCM=m +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_ELAN_I2C_I2C=y +# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set +CONFIG_MOUSE_VSXXXAA=m +CONFIG_MOUSE_GPIO=m +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +CONFIG_JOYSTICK_IFORCE_USB=y +CONFIG_JOYSTICK_IFORCE_232=y +CONFIG_JOYSTICK_WARRIOR=m +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_AS5011=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_SERIAL_WACOM4=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_OF_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_AD7877=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_AD7879_I2C=m +CONFIG_TOUCHSCREEN_AD7879_SPI=m +CONFIG_TOUCHSCREEN_AR1021_I2C=m +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_AUO_PIXCIR=m +CONFIG_TOUCHSCREEN_BU21013=m +CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m +CONFIG_TOUCHSCREEN_CY8CTMG110=m +CONFIG_TOUCHSCREEN_CYTTSP_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP_I2C=m +CONFIG_TOUCHSCREEN_CYTTSP_SPI=m +CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m +CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m +CONFIG_TOUCHSCREEN_DA9052=m +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_HAMPSHIRE=m +CONFIG_TOUCHSCREEN_EETI=m +CONFIG_TOUCHSCREEN_EGALAX=m +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_GOODIX=m +CONFIG_TOUCHSCREEN_ILI210X=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELAN=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_WACOM_I2C=m +CONFIG_TOUCHSCREEN_MAX11801=m +CONFIG_TOUCHSCREEN_MCS5000=m +CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m +CONFIG_TOUCHSCREEN_PIXCIR=m +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_MC13783=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_ELO=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y +CONFIG_TOUCHSCREEN_USB_NEXIO=y +CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_TSC_SERIO=m +CONFIG_TOUCHSCREEN_TSC2005=m +CONFIG_TOUCHSCREEN_TSC2007=m +CONFIG_TOUCHSCREEN_ST1232=m +CONFIG_TOUCHSCREEN_SUN4I=m +CONFIG_TOUCHSCREEN_SUR40=m +CONFIG_TOUCHSCREEN_SX8654=m +CONFIG_TOUCHSCREEN_TPS6507X=m +CONFIG_TOUCHSCREEN_ZFORCE=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AD714X=m +CONFIG_INPUT_AD714X_I2C=m +CONFIG_INPUT_AD714X_SPI=m +CONFIG_INPUT_BMA150=m +CONFIG_INPUT_E3X0_BUTTON=m +CONFIG_INPUT_MC13783_PWRBUTTON=m +CONFIG_INPUT_MMA8450=m +CONFIG_INPUT_MPU3050=m +CONFIG_INPUT_GP2A=m +# CONFIG_INPUT_GPIO_BEEPER is not set +CONFIG_INPUT_GPIO_TILT_POLLED=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_KXTJ9=m +CONFIG_INPUT_KXTJ9_POLLED_MODE=y +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_REGULATOR_HAPTIC=m +CONFIG_INPUT_TPS65218_PWRBUTTON=y +CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_TWL4030_VIBRA=y +CONFIG_INPUT_TWL6040_VIBRA=y +CONFIG_INPUT_UINPUT=y +CONFIG_INPUT_PALMAS_PWRBUTTON=y +CONFIG_INPUT_PCF8574=m +# CONFIG_INPUT_PWM_BEEPER is not set +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +CONFIG_INPUT_DA9052_ONKEY=m +CONFIG_INPUT_DA9055_ONKEY=m +CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_ADXL34X_I2C=m +CONFIG_INPUT_ADXL34X_SPI=m +CONFIG_INPUT_IMS_PCU=m +CONFIG_INPUT_CMA3000=m +CONFIG_INPUT_CMA3000_I2C=m +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +CONFIG_INPUT_DRV260X_HAPTICS=m +CONFIG_INPUT_DRV2667_HAPTICS=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_ALTERA_PS2=m +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_SUN4I_PS2 is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_N_GSM=m +# CONFIG_TRACE_SINK is not set +CONFIG_DEVMEM=y +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_EM is not set +# CONFIG_SERIAL_8250_OMAP is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +# CONFIG_SERIAL_KGDB_NMI is not set +CONFIG_SERIAL_TEGRA=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_BCM63XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_SERIAL_ARC is not set +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# CONFIG_SERIAL_ST_ASC is not set +# CONFIG_TTY_PRINTK is not set +CONFIG_HVC_DRIVER=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=m +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_OMAP=m +CONFIG_HW_RANDOM_OMAP3_ROM=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_HW_RANDOM_TPM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_TCG_TPM=m +CONFIG_TCG_TIS_I2C_ATMEL=m +# CONFIG_TCG_TIS_I2C_INFINEON is not set +# CONFIG_TCG_TIS_I2C_NUVOTON is not set +# CONFIG_TCG_ATMEL is not set +# CONFIG_TCG_TIS_ST33ZP24 is not set +# CONFIG_XILLYBUS is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +CONFIG_I2C_ARB_GPIO_CHALLENGE=m +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +CONFIG_I2C_MUX_PCA954x=y +# CONFIG_I2C_MUX_PINCTRL is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CBUS_GPIO is not set +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set +CONFIG_I2C_GPIO=y +CONFIG_I2C_IMX=y +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_NOMADIK is not set +CONFIG_I2C_OCORES=m +CONFIG_I2C_OMAP=y +CONFIG_I2C_PCA_PLATFORM=m +# CONFIG_I2C_PXA_PCI is not set +# CONFIG_I2C_RK3X is not set +CONFIG_I2C_SIMTEC=m +CONFIG_I2C_SUN6I_P2WI=y +CONFIG_I2C_TEGRA=y +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_DLN2=m +# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_ROBOTFUZZ_OSIF=m +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_SLAVE is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +CONFIG_SPI_BITBANG=m +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DLN2 is not set +CONFIG_SPI_GPIO=m +CONFIG_SPI_IMX=m +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_FSL_DSPI is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_OMAP24XX=m +# CONFIG_SPI_TI_QSPI is not set +CONFIG_SPI_PL022=m +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_SC18IS602 is not set +CONFIG_SPI_SUN4I=m +CONFIG_SPI_SUN6I=m +CONFIG_SPI_TEGRA114=m +CONFIG_SPI_TEGRA20_SFLASH=m +CONFIG_SPI_TEGRA20_SLINK=m +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPMI is not set +CONFIG_HSI=m +CONFIG_HSI_BOARDINFO=y + +# +# HSI controllers +# +CONFIG_OMAP_SSI=m +CONFIG_OMAP_SSI_PORT=m + +# +# HSI clients +# +# CONFIG_CMT_SPEECH is not set +CONFIG_SSI_PROTOCOL=m +# CONFIG_HSI_CHAR is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set +# CONFIG_NTP_PPS is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +CONFIG_PINCTRL_AS3722=y +# CONFIG_PINCTRL_AMD is not set +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_TEGRA=y +CONFIG_PINCTRL_TEGRA124=y +CONFIG_PINCTRL_TEGRA_XUSB=y +CONFIG_PINCTRL_PALMAS=y +CONFIG_PINCTRL_IMX=y +CONFIG_PINCTRL_IMX50=y +CONFIG_PINCTRL_IMX51=y +CONFIG_PINCTRL_IMX53=y +CONFIG_PINCTRL_IMX6Q=y +CONFIG_PINCTRL_IMX6SL=y +CONFIG_PINCTRL_IMX6SX=y +CONFIG_PINCTRL_VF610=y +CONFIG_PINCTRL_SUNXI_COMMON=y +CONFIG_PINCTRL_SUN4I_A10=y +CONFIG_PINCTRL_SUN5I_A10S=y +CONFIG_PINCTRL_SUN5I_A13=y +CONFIG_PINCTRL_SUN6I_A31=y +CONFIG_PINCTRL_SUN6I_A31S=y +CONFIG_PINCTRL_SUN6I_A31_R=y +CONFIG_PINCTRL_SUN7I_A20=y +CONFIG_PINCTRL_SUN8I_A23=y +CONFIG_PINCTRL_SUN8I_A23_R=y +CONFIG_PINCTRL_SUN9I_A80=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_OF_GPIO=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +# CONFIG_GPIO_OF_HELPER is not set +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_MAX730X=m + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EM is not set +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +CONFIG_GPIO_MXC=y +CONFIG_GPIO_OMAP=y +CONFIG_GPIO_PL061=y +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_VF610=y +# CONFIG_GPIO_ZEVIO is not set + +# +# I2C GPIO expanders +# +CONFIG_GPIO_ADP5588=m +CONFIG_GPIO_ADNP=m +CONFIG_GPIO_MAX7300=m +CONFIG_GPIO_MAX732X=m +CONFIG_GPIO_PCA953X=m +CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_SX150X=y + +# +# MFD GPIO expanders +# +CONFIG_GPIO_DA9052=y +CONFIG_GPIO_DA9055=y +CONFIG_GPIO_DLN2=m +CONFIG_GPIO_PALMAS=y +CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_TWL6040=y + +# +# SPI GPIO expanders +# +CONFIG_GPIO_74X164=m +CONFIG_GPIO_MAX7301=m +CONFIG_GPIO_MCP23S08=m +CONFIG_GPIO_MC33880=m + +# +# USB GPIO expanders +# +CONFIG_GPIO_VIPERBOARD=m +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +CONFIG_W1_MASTER_MXC=m +CONFIG_W1_MASTER_DS1WM=m +CONFIG_W1_MASTER_GPIO=m +CONFIG_HDQ_MASTER_OMAP=m + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2408=m +CONFIG_W1_SLAVE_DS2408_READBACK=y +CONFIG_W1_SLAVE_DS2413=m +CONFIG_W1_SLAVE_DS2406=m +CONFIG_W1_SLAVE_DS2423=m +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +CONFIG_W1_SLAVE_DS2433_CRC=y +CONFIG_W1_SLAVE_DS2760=m +CONFIG_W1_SLAVE_DS2780=m +CONFIG_W1_SLAVE_DS2781=m +CONFIG_W1_SLAVE_DS28E04=m +CONFIG_W1_SLAVE_BQ27000=m +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +CONFIG_GENERIC_ADC_BATTERY=m +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_BQ27X00_I2C=y +CONFIG_BATTERY_BQ27X00_PLATFORM=y +CONFIG_BATTERY_DA9052=m +CONFIG_AXP288_FUEL_GAUGE=m +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_BATTERY_TWL4030_MADC is not set +# CONFIG_BATTERY_RX51 is not set +CONFIG_CHARGER_ISP1704=m +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_TWL4030 is not set +# CONFIG_CHARGER_LP8727 is not set +CONFIG_CHARGER_GPIO=m +# CONFIG_CHARGER_MANAGER is not set +CONFIG_CHARGER_BQ2415X=m +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_AS3722=y +# CONFIG_POWER_RESET_BRCMSTB is not set +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_IMX=y +# CONFIG_POWER_RESET_LTC2952 is not set +CONFIG_POWER_RESET_RESTART=y +# CONFIG_POWER_RESET_VERSATILE is not set +CONFIG_POWER_RESET_SYSCON=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y +CONFIG_POWER_AVS=y +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +CONFIG_SENSORS_AD7314=m +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7X10=m +CONFIG_SENSORS_ADT7310=m +CONFIG_SENSORS_ADT7410=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_DA9052_ADC=m +CONFIG_SENSORS_DA9055=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_MC13783_ADC=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_G762=m +CONFIG_SENSORS_GPIO_FAN=y +CONFIG_SENSORS_HIH6130=m +CONFIG_SENSORS_IIO_HWMON=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_POWR1220=m +CONFIG_SENSORS_LINEAGE=m +CONFIG_SENSORS_LTC2945=m +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4222=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LTC4260=m +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_MAX1111=m +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX197=m +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_MAX6697=m +CONFIG_SENSORS_HTU21=m +CONFIG_SENSORS_MCP3021=m +CONFIG_SENSORS_ADCXX=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM70=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LM95234=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m +CONFIG_SENSORS_NCT6775=m +CONFIG_SENSORS_NCT7802=m +CONFIG_SENSORS_NCT7904=m +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +CONFIG_SENSORS_LTC2978_REGULATOR=y +CONFIG_SENSORS_MAX16064=m +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +CONFIG_SENSORS_TPS40422=m +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_PWM_FAN=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHTC1=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +CONFIG_SENSORS_EMC2103=m +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +CONFIG_SENSORS_SMM665=m +CONFIG_SENSORS_ADC128D818=m +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_ADS7871=m +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_INA209=m +CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_TMP103=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_TWL4030_MADC=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_GOV_BANG_BANG=y +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_CPU_THERMAL=y +CONFIG_CLOCK_THERMAL=y +# CONFIG_THERMAL_EMULATION is not set +CONFIG_IMX_THERMAL=y +CONFIG_TEGRA_SOCTHERM=y + +# +# Texas Instruments thermal drivers +# +CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y +CONFIG_OMAP4_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_DA9052_WATCHDOG=y +# CONFIG_DA9055_WATCHDOG is not set +# CONFIG_DA9063_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_XILINX_WATCHDOG is not set +CONFIG_ARM_SP805_WATCHDOG=m +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y +# CONFIG_MAX63XX_WATCHDOG is not set +CONFIG_IMX2_WDT=y +CONFIG_TEGRA_WATCHDOG=y +# CONFIG_MEN_A21_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +# CONFIG_SSB_DRIVER_GPIO is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +CONFIG_BCMA=m +CONFIG_BCMA_BLOCKIO=y +# CONFIG_BCMA_HOST_SOC is not set +# CONFIG_BCMA_DRIVER_GMAC_CMN is not set +# CONFIG_BCMA_DRIVER_GPIO is not set +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +CONFIG_MFD_AS3722=y +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +CONFIG_MFD_AXP20X=y +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_PMIC_DA903X is not set +CONFIG_PMIC_DA9052=y +CONFIG_MFD_DA9052_SPI=y +CONFIG_MFD_DA9052_I2C=y +CONFIG_MFD_DA9055=y +CONFIG_MFD_DA9063=y +# CONFIG_MFD_DA9150 is not set +CONFIG_MFD_DLN2=y +CONFIG_MFD_MC13XXX=m +CONFIG_MFD_MC13XXX_SPI=m +CONFIG_MFD_MC13XXX_I2C=m +# CONFIG_MFD_HI6421_PMIC is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_INTEL_SOC_PMIC is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MFD_VIPERBOARD=m +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_PM8921_CORE is not set +# CONFIG_MFD_RT5033 is not set +CONFIG_MFD_RTSX_USB=m +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +CONFIG_MFD_SUN6I_PRCM=y +CONFIG_MFD_SYSCON=y +CONFIG_MFD_TI_AM335X_TSCADC=m +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +CONFIG_MFD_OMAP_USB_HOST=y +CONFIG_MFD_PALMAS=y +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65090 is not set +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65218=y +# CONFIG_MFD_TPS6586X is not set +CONFIG_MFD_TPS65910=y +# CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_POWER=y +CONFIG_MFD_TWL4030_AUDIO=y +CONFIG_TWL6040_CORE=y +CONFIG_MFD_WL1273_CORE=m +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +CONFIG_REGULATOR_USERSPACE_CONSUMER=y +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_DA9052=y +# CONFIG_REGULATOR_DA9055 is not set +CONFIG_REGULATOR_DA9063=y +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +CONFIG_REGULATOR_MC13XXX_CORE=m +CONFIG_REGULATOR_MC13783=m +CONFIG_REGULATOR_MC13892=m +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_PBIAS=y +CONFIG_REGULATOR_PFUZE100=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_S2MPA01=m +CONFIG_REGULATOR_S2MPS11=m +CONFIG_REGULATOR_S5M8767=m +CONFIG_REGULATOR_TI_ABB=y +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65218=y +# CONFIG_REGULATOR_TPS6524X is not set +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y +CONFIG_MEDIA_RC_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_TUNER=m +CONFIG_V4L2_MEM2MEM_DEV=y +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DMA_CONTIG=m +CONFIG_VIDEOBUF_DVB=m +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +CONFIG_VIDEOBUF2_VMALLOC=y +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_DVB_CORE=y +CONFIG_DVB_NET=y +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_MAX_ADAPTERS=8 +CONFIG_DVB_DYNAMIC_MINORS=y + +# +# Media drivers +# +CONFIG_RC_CORE=y +CONFIG_RC_MAP=m +CONFIG_RC_DECODERS=y +CONFIG_LIRC=m +CONFIG_IR_LIRC_CODEC=m +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +CONFIG_IR_SHARP_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m +CONFIG_IR_XMP_DECODER=m +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +CONFIG_IR_HIX5HD2=m +CONFIG_IR_IMON=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_IGORPLUGUSB=m +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +CONFIG_RC_LOOPBACK=m +CONFIG_IR_GPIO_CIR=m +CONFIG_IR_SUNXI=m +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STK1135=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TOUPTEK=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +CONFIG_VIDEO_CPIA2=m +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_VIDEO_USBTV=m + +# +# Analog TV USB devices +# +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_STK1160_COMMON=m +CONFIG_VIDEO_STK1160_AC97=y +CONFIG_VIDEO_STK1160=m +# CONFIG_VIDEO_GO7007 is not set + +# +# Analog/digital TV USB devices +# +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_V4L2=y +CONFIG_VIDEO_AU0828_RC=y +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_RC=y +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +# CONFIG_VIDEO_TM6000 is not set + +# +# Digital TV USB devices +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +CONFIG_DVB_USB_DVBSKY=m +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set +# CONFIG_DVB_AS102 is not set + +# +# Webcam, TV (analog/digital) USB devices +# +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_V4L2=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_EM28XX_RC=m + +# +# Software defined radio USB devices +# +CONFIG_USB_AIRSPY=m +CONFIG_USB_HACKRF=m +CONFIG_USB_MSI2500=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_OMAP2_VOUT_VRFB=y +CONFIG_VIDEO_OMAP2_VOUT=m +CONFIG_VIDEO_OMAP3=m +# CONFIG_VIDEO_OMAP3_DEBUG is not set +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +# CONFIG_VIDEO_MX3 is not set +CONFIG_VIDEO_AM437X_VPFE=m +# CONFIG_VIDEO_XILINX is not set +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y +CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_VIDEO_TI_VPE is not set +CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m +# CONFIG_VIDEO_VIM2M is not set + +# +# Supported MMC/SDIO adapters +# +CONFIG_SMS_SDIO_DRV=m +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_TEA575X=m +CONFIG_RADIO_SI470X=y +CONFIG_USB_SI470X=m +CONFIG_I2C_SI470X=m +CONFIG_RADIO_SI4713=m +CONFIG_USB_SI4713=m +# CONFIG_PLATFORM_SI4713 is not set +CONFIG_I2C_SI4713=m +CONFIG_USB_MR800=m +CONFIG_USB_DSBR=m +CONFIG_RADIO_SHARK=m +CONFIG_RADIO_SHARK2=m +CONFIG_USB_KEENE=m +CONFIG_USB_RAREMONO=m +CONFIG_USB_MA901=m +CONFIG_RADIO_TEA5764=m +CONFIG_RADIO_SAA7706H=m +CONFIG_RADIO_TEF6862=m +CONFIG_RADIO_WL1273=m + +# +# Texas Instruments WL128x FM driver (ST based) +# +CONFIG_RADIO_WL128X=m +CONFIG_MEDIA_COMMON_OPTIONS=y + +# +# common driver options +# +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_CYPRESS_FIRMWARE=m +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_SMS_SIANO_MDTV=m +CONFIG_SMS_SIANO_RC=y +# CONFIG_SMS_SIANO_DEBUGFS is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, frontends) +# +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=y + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m + +# +# RDS decoders +# + +# +# Video decoders +# +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_TVP5150=m + +# +# Video and audio decoders +# +CONFIG_VIDEO_CX25840=m + +# +# Video encoders +# + +# +# Camera sensor devices +# +CONFIG_VIDEO_MT9V011=m + +# +# Flash devices +# + +# +# Video improvement chips +# + +# +# Audio/Video compression chips +# + +# +# Miscellaneous helper chips +# + +# +# Sensors used on soc_camera driver +# + +# +# soc_camera sensor drivers +# +CONFIG_SOC_CAMERA_IMX074=m +CONFIG_SOC_CAMERA_MT9M001=m +CONFIG_SOC_CAMERA_MT9M111=m +CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9T112=m +CONFIG_SOC_CAMERA_MT9V022=m +CONFIG_SOC_CAMERA_OV2640=m +CONFIG_SOC_CAMERA_OV5642=m +CONFIG_SOC_CAMERA_OV6650=m +CONFIG_SOC_CAMERA_OV772X=m +CONFIG_SOC_CAMERA_OV9640=m +CONFIG_SOC_CAMERA_OV9740=m +CONFIG_SOC_CAMERA_RJ54N1=m +CONFIG_SOC_CAMERA_TW9910=m +CONFIG_MEDIA_TUNER=y +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA827X=y +CONFIG_MEDIA_TUNER_TDA18271=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MSI001=m +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_XC4000=y +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_CX22702=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_RTL2832_SDR=m +CONFIG_DVB_SI2168=m +# CONFIG_DVB_AS102_FE is not set + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_SP2=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_TEGRA_HOST1X=m +CONFIG_TEGRA_HOST1X_FIREWALL=y +CONFIG_IMX_IPUV3_CORE=y + +# +# Direct Rendering Manager +# +CONFIG_DRM=y +CONFIG_DRM_MIPI_DSI=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +# CONFIG_DRM_I2C_ADV7511 is not set +# CONFIG_DRM_I2C_CH7006 is not set +# CONFIG_DRM_I2C_SIL164 is not set +CONFIG_DRM_I2C_NXP_TDA998X=y +CONFIG_DRM_DW_HDMI=y +# CONFIG_DRM_PTN3460 is not set +# CONFIG_DRM_PS8622 is not set +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_EXYNOS is not set +CONFIG_DRM_UDL=y +# CONFIG_DRM_ARMADA is not set +CONFIG_DRM_OMAP=y +CONFIG_DRM_OMAP_NUM_CRTCS=1 +CONFIG_DRM_TILCDC=y +CONFIG_DRM_TEGRA=m +CONFIG_DRM_TEGRA_FBDEV=y +# CONFIG_DRM_TEGRA_DEBUG is not set +# CONFIG_DRM_TEGRA_STAGING is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_LD9040 is not set +# CONFIG_DRM_PANEL_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_STI is not set +CONFIG_DRM_IMX=y +CONFIG_DRM_IMX_FB_HELPER=y +CONFIG_DRM_IMX_PARALLEL_DISPLAY=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_LDB=y +CONFIG_DRM_IMX_IPUV3=y +CONFIG_DRM_IMX_HDMI=y + +# +# Frame buffer Devices +# +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_CMDLINE=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +CONFIG_FB_ARMCLCD=y +# CONFIG_PLAT_VERSATILE_CLCD is not set +# CONFIG_FB_IMX is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SMSCUFX=m +CONFIG_FB_UDL=m +# CONFIG_FB_DA8XX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MX3 is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_MXS is not set +CONFIG_FB_SIMPLE=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS_INIT=y +CONFIG_OMAP2_DSS=y +# CONFIG_OMAP2_DSS_DEBUG is not set +# CONFIG_OMAP2_DSS_DEBUGFS is not set +CONFIG_OMAP2_DSS_DPI=y +CONFIG_OMAP2_DSS_VENC=y +CONFIG_OMAP2_DSS_HDMI_COMMON=y +CONFIG_OMAP4_DSS_HDMI=y +CONFIG_OMAP5_DSS_HDMI=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y + +# +# OMAP Display Device Drivers (new device model) +# +CONFIG_DISPLAY_ENCODER_OPA362=y +CONFIG_DISPLAY_ENCODER_TFP410=y +CONFIG_DISPLAY_ENCODER_TPD12S015=y +CONFIG_DISPLAY_CONNECTOR_DVI=y +CONFIG_DISPLAY_CONNECTOR_HDMI=y +# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set +CONFIG_DISPLAY_PANEL_DPI=y +# CONFIG_DISPLAY_PANEL_DSI_CM is not set +CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m +# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set +# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set +# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set +CONFIG_FB_SSD1307=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +# CONFIG_BACKLIGHT_DA9052 is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +# CONFIG_BACKLIGHT_LP855X is not set +# CONFIG_BACKLIGHT_PANDORA is not set +# CONFIG_BACKLIGHT_TPS65217 is not set +CONFIG_BACKLIGHT_GPIO=y +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_DMAENGINE_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_COMPRESS_OFFLOAD=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_KCTL_JACK=y +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +CONFIG_SND_ALOOP=m +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 + +# +# HD-Audio +# +CONFIG_SND_HDA=m +CONFIG_SND_HDA_TEGRA=m +CONFIG_SND_HDA_DSP_LOADER=y +CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_RECONFIG=y +CONFIG_SND_HDA_INPUT_BEEP=y +CONFIG_SND_HDA_INPUT_BEEP_MODE=1 +CONFIG_SND_HDA_INPUT_JACK=y +CONFIG_SND_HDA_PATCH_LOADER=y +CONFIG_SND_HDA_CODEC_REALTEK=m +CONFIG_SND_HDA_CODEC_ANALOG=m +CONFIG_SND_HDA_CODEC_SIGMATEL=m +CONFIG_SND_HDA_CODEC_VIA=m +CONFIG_SND_HDA_CODEC_HDMI=m +CONFIG_SND_HDA_CODEC_CIRRUS=m +CONFIG_SND_HDA_CODEC_CONEXANT=m +CONFIG_SND_HDA_CODEC_CA0110=m +CONFIG_SND_HDA_CODEC_CA0132=m +CONFIG_SND_HDA_CODEC_CA0132_DSP=y +CONFIG_SND_HDA_CODEC_CMEDIA=m +CONFIG_SND_HDA_CODEC_SI3054=m +CONFIG_SND_HDA_GENERIC=m +CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 +CONFIG_SND_HDA_CORE=m +CONFIG_SND_ARM=y +# CONFIG_SND_ARMAACI is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +CONFIG_SND_USB_LINE6=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m +CONFIG_SND_SOC=m +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_ATMEL_SOC is not set +CONFIG_SND_EDMA_SOC=m +CONFIG_SND_DAVINCI_SOC_MCASP=m +CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=m +CONFIG_SND_AM33XX_SOC_EVM=m +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +CONFIG_SND_SOC_FSL_SSI=m +CONFIG_SND_SOC_FSL_SPDIF=m +# CONFIG_SND_SOC_FSL_ESAI is not set +CONFIG_SND_SOC_FSL_UTILS=m +CONFIG_SND_SOC_IMX_PCM_DMA=m +CONFIG_SND_SOC_IMX_AUDMUX=m +CONFIG_SND_IMX_SOC=m +CONFIG_SND_SOC_IMX_SSI=m +CONFIG_SND_SOC_IMX_PCM_FIQ=m + +# +# SoC Audio support for Freescale i.MX boards: +# +CONFIG_SND_SOC_EUKREA_TLV320=m +# CONFIG_SND_SOC_IMX_WM8962 is not set +# CONFIG_SND_SOC_IMX_ES8328 is not set +CONFIG_SND_SOC_IMX_SGTL5000=m +CONFIG_SND_SOC_IMX_SPDIF=m +CONFIG_SND_SOC_IMX_MC13783=m +# CONFIG_SND_SOC_FSL_ASOC_CARD is not set +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_DMIC=m +CONFIG_SND_OMAP_SOC_MCBSP=m +CONFIG_SND_OMAP_SOC_MCPDM=m +CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m +CONFIG_SND_OMAP_SOC_RX51=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +# CONFIG_SND_SOC_QCOM is not set +CONFIG_SND_SOC_TEGRA=m +# CONFIG_SND_SOC_TEGRA_RT5640 is not set +# CONFIG_SND_SOC_TEGRA_WM8753 is not set +# CONFIG_SND_SOC_TEGRA_WM8903 is not set +# CONFIG_SND_SOC_TEGRA_TRIMSLICE is not set +# CONFIG_SND_SOC_TEGRA_ALC5632 is not set +# CONFIG_SND_SOC_TEGRA_MAX98090 is not set +# CONFIG_SND_SOC_TEGRA_RT5677 is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +CONFIG_SND_SOC_I2C_AND_SPI=m + +# +# CODEC drivers +# +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +CONFIG_SND_SOC_DMIC=m +CONFIG_SND_SOC_HDMI_CODEC=m +# CONFIG_SND_SOC_ES8328 is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1792A is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_RT5677_SPI is not set +CONFIG_SND_SOC_SGTL5000=m +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TFA9879 is not set +CONFIG_SND_SOC_TLV320AIC23=m +CONFIG_SND_SOC_TLV320AIC23_I2C=m +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +CONFIG_SND_SOC_TLV320AIC31XX=m +CONFIG_SND_SOC_TLV320AIC3X=m +# CONFIG_SND_SOC_TS3A227E is not set +CONFIG_SND_SOC_TWL4030=m +CONFIG_SND_SOC_TWL6040=m +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8978 is not set +CONFIG_SND_SOC_MC13783=m +CONFIG_SND_SOC_TPA6130A2=m +CONFIG_SND_SIMPLE_CARD=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID support +# +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=y +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_ACRUX=m +CONFIG_HID_ACRUX_FF=y +CONFIG_HID_APPLE=y +CONFIG_HID_APPLEIR=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=y +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CP2112=m +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=y +CONFIG_HID_HOLTEK=m +CONFIG_HOLTEK_FF=y +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LCPOWER=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=y +CONFIG_HID_LOGITECH_HIDPP=y +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_LOGIWHEELS_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=m +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=m +CONFIG_HID_SENSOR_CUSTOM_SENSOR=m + +# +# USB HID support +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PLATFORM=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_MXC=m +CONFIG_USB_EHCI_HCD_OMAP=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FUSBH200_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +CONFIG_USB_U132_HCD=m +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_HWA_HCD=m +# CONFIG_USB_IMX21_HCD is not set +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_SSB is not set +# CONFIG_USB_HCD_TEST_MODE is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USBIP_CORE=m +CONFIG_USBIP_VHCI_HCD=m +CONFIG_USBIP_HOST=m +# CONFIG_USBIP_DEBUG is not set +CONFIG_USB_MUSB_HDRC=y +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_GADGET is not set +CONFIG_USB_MUSB_DUAL_ROLE=y + +# +# Platform Glue Layer +# +CONFIG_USB_MUSB_TUSB6010=y +CONFIG_USB_MUSB_OMAP2PLUS=y +CONFIG_USB_MUSB_AM35X=y +CONFIG_USB_MUSB_DSPS=y +CONFIG_USB_MUSB_AM335X_CHILD=y +# CONFIG_USB_INVENTRA_DMA is not set +# CONFIG_USB_TI_CPPI41_DMA is not set +# CONFIG_USB_TUSB_OMAP_DMA is not set +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_OMAP=m + +# +# Debugging features +# +# CONFIG_USB_DWC3_DEBUG is not set +# CONFIG_USB_DWC2 is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +# CONFIG_USB_CHIPIDEA_DEBUG is not set +# CONFIG_USB_ISP1760 is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_F81232=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_METRO=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +CONFIG_USB_SERIAL_WISHBONE=m +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +CONFIG_USB_EZUSB_FX2=m +CONFIG_USB_HSIC_USB3503=m +# CONFIG_USB_LINK_LAYER_TEST is not set +CONFIG_USB_CHAOSKEY=m +# CONFIG_USB_ATM is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_AM335X_CONTROL_USB=y +CONFIG_AM335X_PHY_USB=y +CONFIG_TWL6030_USB=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_MXS_PHY=y +CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FSL_USB2 is not set +# CONFIG_USB_FUSB300 is not set +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_BDC_UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +CONFIG_USB_LIBCOMPOSITE=y +CONFIG_USB_U_ETHER=y +CONFIG_USB_F_ECM=y +CONFIG_USB_F_SUBSET=y +CONFIG_USB_F_RNDIS=y +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_GADGET_TARGET is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +CONFIG_USB_LED_TRIG=y +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_I1480U=m +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MMC_SDHCI_TEGRA=y +# CONFIG_MMC_SDHCI_F_SDH30 is not set +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_MXC is not set +CONFIG_MMC_DW=m +# CONFIG_MMC_DW_IDMAC is not set +CONFIG_MMC_DW_PLTFM=m +CONFIG_MMC_DW_EXYNOS=m +# CONFIG_MMC_DW_K3 is not set +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_REALTEK_USB=m +CONFIG_MMC_SUNXI=y +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set + +# +# LED drivers +# +CONFIG_LEDS_LM3530=m +CONFIG_LEDS_LM3642=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_PCA9532_GPIO=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP55XX_COMMON=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_LP5562=m +CONFIG_LEDS_LP8501=m +CONFIG_LEDS_LP8860=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_PCA963X=m +CONFIG_LEDS_DA9052=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_REGULATOR=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_LT3593=m +CONFIG_LEDS_MC13783=m +CONFIG_LEDS_TCA6507=m +CONFIG_LEDS_LM355x=m + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set +# CONFIG_LEDS_SYSCON is not set +# CONFIG_LEDS_PM8941_WLED is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1374_WDT=y +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_HYM8563=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_ISL12057=y +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PALMAS=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_PCF8523=y +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF85063=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_TPS65910=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_S5M=y + +# +# SPI RTC drivers +# +CONFIG_RTC_DRV_M41T93=m +CONFIG_RTC_DRV_M41T94=m +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1343=m +CONFIG_RTC_DRV_DS1347=m +CONFIG_RTC_DRV_DS1390=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_DS3234=m +CONFIG_RTC_DRV_PCF2123=m +CONFIG_RTC_DRV_RX4581=m +CONFIG_RTC_DRV_MCP795=m + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=m +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1685_FAMILY=m +CONFIG_RTC_DRV_DS1685=y +# CONFIG_RTC_DRV_DS1689 is not set +# CONFIG_RTC_DRV_DS17285 is not set +# CONFIG_RTC_DRV_DS17485 is not set +# CONFIG_RTC_DRV_DS17885 is not set +# CONFIG_RTC_DS1685_PROC_REGS is not set +# CONFIG_RTC_DS1685_SYSFS_REGS is not set +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_DA9052=y +CONFIG_RTC_DRV_DA9055=m +CONFIG_RTC_DRV_DA9063=m +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_IMXDI=y +CONFIG_RTC_DRV_OMAP=y +CONFIG_RTC_DRV_PL030=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +CONFIG_RTC_DRV_SUNXI=y +CONFIG_RTC_DRV_MC13XXX=m +CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_MXC=y +CONFIG_RTC_DRV_SNVS=y +# CONFIG_RTC_DRV_XGENE is not set + +# +# HID Sensor RTC drivers +# +CONFIG_RTC_DRV_HID_SENSOR_TIME=m +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_AMBA_PL08X=y +CONFIG_DW_DMAC_CORE=y +CONFIG_DW_DMAC=y +CONFIG_MX3_IPU=y +CONFIG_MX3_IPU_IRQS=4 +CONFIG_TEGRA20_APB_DMA=y +CONFIG_TI_EDMA=y +CONFIG_PL330_DMA=y +CONFIG_IMX_SDMA=y +CONFIG_IMX_DMA=y +CONFIG_MXS_DMA=y +CONFIG_DMA_OMAP=y +CONFIG_TI_CPPI41=y +CONFIG_FSL_EDMA=y +CONFIG_DMA_SUN6I=y +# CONFIG_NBPFAXI_DMA is not set +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_OF=y + +# +# DMA Clients +# +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_DMEM_GENIRQ=m +CONFIG_UIO_PRUSS=m +# CONFIG_VFIO is not set +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO=y + +# +# Virtio drivers +# +CONFIG_VIRTIO_BALLOON=m +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MMIO=m +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_STAGING=y +# CONFIG_PRISM2_USB is not set +# CONFIG_COMEDI is not set +CONFIG_RTLLIB=m +CONFIG_RTLLIB_CRYPTO_CCMP=m +CONFIG_RTLLIB_CRYPTO_TKIP=m +CONFIG_RTLLIB_CRYPTO_WEP=m +CONFIG_R8712U=m +CONFIG_R8188EU=m +CONFIG_88EU_AP_MODE=y +# CONFIG_R8723AU is not set +# CONFIG_VT6656 is not set + +# +# IIO staging drivers +# + +# +# Accelerometers +# +CONFIG_ADIS16201=m +CONFIG_ADIS16203=m +CONFIG_ADIS16204=m +CONFIG_ADIS16209=m +CONFIG_ADIS16220=m +CONFIG_ADIS16240=m +CONFIG_LIS3L02DQ=m +CONFIG_SCA3000=m + +# +# Analog to digital converters +# +CONFIG_AD7606=m +# CONFIG_AD7606_IFACE_PARALLEL is not set +CONFIG_AD7606_IFACE_SPI=m +CONFIG_AD7780=m +CONFIG_AD7816=m +CONFIG_AD7192=m +CONFIG_AD7280=m + +# +# Analog digital bi-direction converters +# +CONFIG_ADT7316=m +CONFIG_ADT7316_SPI=m +CONFIG_ADT7316_I2C=m + +# +# Capacitance to digital converters +# +CONFIG_AD7150=m +CONFIG_AD7152=m +CONFIG_AD7746=m + +# +# Direct Digital Synthesis +# +CONFIG_AD9832=m +CONFIG_AD9834=m + +# +# Digital gyroscope sensors +# +CONFIG_ADIS16060=m + +# +# Network Analyzer, Impedance Converters +# +CONFIG_AD5933=m + +# +# Light sensors +# +CONFIG_SENSORS_ISL29018=m +CONFIG_SENSORS_ISL29028=m +CONFIG_TSL2583=m +CONFIG_TSL2x7x=m + +# +# Magnetometer sensors +# +CONFIG_SENSORS_HMC5843=m +CONFIG_SENSORS_HMC5843_I2C=m +CONFIG_SENSORS_HMC5843_SPI=m + +# +# Active energy metering IC +# +CONFIG_ADE7753=m +CONFIG_ADE7754=m +CONFIG_ADE7758=m +CONFIG_ADE7759=m +CONFIG_ADE7854=m +CONFIG_ADE7854_I2C=m +CONFIG_ADE7854_SPI=m + +# +# Resolver to digital converters +# +CONFIG_AD2S90=m +CONFIG_AD2S1200=m +CONFIG_AD2S1210=m + +# +# Triggers - standalone +# +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set +# CONFIG_IIO_SIMPLE_DUMMY is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +# CONFIG_MFD_NVEC is not set +# CONFIG_STAGING_MEDIA is not set + +# +# Android +# +CONFIG_ASHMEM=y +CONFIG_ANDROID_TIMED_OUTPUT=y +CONFIG_ANDROID_TIMED_GPIO=m +# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set +CONFIG_SYNC=y +# CONFIG_SW_SYNC is not set +CONFIG_ION=y +# CONFIG_ION_TEST is not set +# CONFIG_ION_DUMMY is not set +# CONFIG_ION_TEGRA is not set +# CONFIG_USB_WPAN_HCD is not set +# CONFIG_WIMAX_GDM72XX is not set +# CONFIG_LTE_GDM724X is not set +# CONFIG_MTD_SPINAND_MT29F is not set +# CONFIG_LUSTRE_FS is not set +# CONFIG_DGAP is not set +# CONFIG_GS_FPGABOOT is not set +# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set +# CONFIG_FB_TFT is not set +# CONFIG_CHROME_PLATFORMS is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI570 is not set +CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_CLK_TWL6040=y +# CONFIG_CLK_QORIQ is not set +CONFIG_COMMON_CLK_PALMAS=y +# CONFIG_COMMON_CLK_PWM is not set +# CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +CONFIG_HWSPINLOCK=y + +# +# Hardware Spinlock drivers +# +CONFIG_HWSPINLOCK_OMAP=y + +# +# Clock Source drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_MMIO=y +CONFIG_SUN4I_TIMER=y +CONFIG_SUN5I_HSTIMER=y +CONFIG_TEGRA_TIMER=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_GLOBAL_TIMER=y +CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y +# CONFIG_ATMEL_PIT is not set +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_MAILBOX=y +# CONFIG_ARM_MHU is not set +CONFIG_PL320_MBOX=y +CONFIG_OMAP2PLUS_MBOX=y +CONFIG_OMAP_MBOX_KFIFO_SIZE=256 +# CONFIG_ALTERA_MBOX is not set +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +CONFIG_OF_IOMMU=y +CONFIG_OMAP_IOMMU=y +# CONFIG_OMAP_IOMMU_DEBUG is not set +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_ARM_SMMU=y + +# +# Remoteproc drivers +# +CONFIG_REMOTEPROC=y +CONFIG_OMAP_REMOTEPROC=y +# CONFIG_STE_MODEM_RPROC is not set +CONFIG_WKUP_M3_RPROC=y + +# +# Rpmsg drivers +# +CONFIG_RPMSG=y + +# +# SOC (System On Chip) specific Drivers +# +CONFIG_SOC_TI=y +CONFIG_PM_DEVFREQ=y + +# +# DEVFREQ Governors +# +CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y +CONFIG_DEVFREQ_GOV_PERFORMANCE=y +CONFIG_DEVFREQ_GOV_POWERSAVE=y +CONFIG_DEVFREQ_GOV_USERSPACE=y + +# +# DEVFREQ Drivers +# +CONFIG_ARM_TEGRA_DEVFREQ=y +# CONFIG_PM_DEVFREQ_EVENT is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +# CONFIG_EXTCON_ADC_JACK is not set +CONFIG_EXTCON_GPIO=y +CONFIG_EXTCON_PALMAS=y +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +CONFIG_EXTCON_USB_GPIO=y +CONFIG_MEMORY=y +CONFIG_TI_EMIF=y +CONFIG_OMAP_GPMC=y +CONFIG_TEGRA_MC=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 + +# +# Accelerometers +# +CONFIG_BMA180=m +CONFIG_BMC150_ACCEL=m +CONFIG_HID_SENSOR_ACCEL_3D=m +CONFIG_IIO_ST_ACCEL_3AXIS=m +CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m +CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m +CONFIG_KXSD9=m +CONFIG_MMA8452=m +CONFIG_KXCJK1013=m +CONFIG_MMA9551_CORE=m +CONFIG_MMA9551=m +CONFIG_MMA9553=m + +# +# Analog to digital converters +# +CONFIG_AD_SIGMA_DELTA=m +CONFIG_AD7266=m +CONFIG_AD7291=m +CONFIG_AD7298=m +CONFIG_AD7476=m +CONFIG_AD7791=m +CONFIG_AD7793=m +CONFIG_AD7887=m +CONFIG_AD7923=m +CONFIG_AD799X=m +CONFIG_AXP288_ADC=m +CONFIG_CC10001_ADC=m +CONFIG_MAX1027=m +CONFIG_MAX1363=m +CONFIG_MCP320X=m +CONFIG_MCP3422=m +CONFIG_NAU7802=m +CONFIG_TI_ADC081C=m +CONFIG_TI_ADC128S052=m +CONFIG_TI_AM335X_ADC=m +CONFIG_TWL4030_MADC=m +CONFIG_TWL6030_GPADC=m +CONFIG_VF610_ADC=m +CONFIG_VIPERBOARD_ADC=m + +# +# Amplifiers +# +CONFIG_AD8366=m + +# +# Hid Sensor IIO Common +# +CONFIG_HID_SENSOR_IIO_COMMON=m +CONFIG_HID_SENSOR_IIO_TRIGGER=m + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORS_COMMONS is not set +CONFIG_IIO_SSP_SENSORHUB=m +CONFIG_IIO_ST_SENSORS_I2C=m +CONFIG_IIO_ST_SENSORS_SPI=m +CONFIG_IIO_ST_SENSORS_CORE=m + +# +# Digital to analog converters +# +CONFIG_AD5064=m +CONFIG_AD5360=m +CONFIG_AD5380=m +CONFIG_AD5421=m +CONFIG_AD5446=m +CONFIG_AD5449=m +CONFIG_AD5504=m +CONFIG_AD5624R_SPI=m +CONFIG_AD5686=m +CONFIG_AD5755=m +CONFIG_AD5764=m +CONFIG_AD5791=m +CONFIG_AD7303=m +CONFIG_MAX517=m +CONFIG_MAX5821=m +CONFIG_MCP4725=m +CONFIG_MCP4922=m + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +CONFIG_AD9523=m + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +CONFIG_ADF4350=m + +# +# Digital gyroscope sensors +# +CONFIG_ADIS16080=m +CONFIG_ADIS16130=m +CONFIG_ADIS16136=m +CONFIG_ADIS16260=m +CONFIG_ADXRS450=m +CONFIG_BMG160=m +CONFIG_HID_SENSOR_GYRO_3D=m +CONFIG_IIO_ST_GYRO_3AXIS=m +CONFIG_IIO_ST_GYRO_I2C_3AXIS=m +CONFIG_IIO_ST_GYRO_SPI_3AXIS=m +CONFIG_ITG3200=m + +# +# Humidity sensors +# +CONFIG_DHT11=m +CONFIG_SI7005=m +CONFIG_SI7020=m + +# +# Inertial measurement units +# +CONFIG_ADIS16400=m +CONFIG_ADIS16480=m +CONFIG_KMX61=m +CONFIG_INV_MPU6050_IIO=m +CONFIG_IIO_ADIS_LIB=m +CONFIG_IIO_ADIS_LIB_BUFFER=y + +# +# Light sensors +# +CONFIG_ADJD_S311=m +CONFIG_AL3320A=m +CONFIG_APDS9300=m +CONFIG_CM32181=m +CONFIG_CM3232=m +CONFIG_CM3323=m +CONFIG_CM36651=m +CONFIG_GP2AP020A00F=m +CONFIG_ISL29125=m +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +CONFIG_JSA1212=m +CONFIG_LTR501=m +CONFIG_TCS3414=m +CONFIG_TCS3472=m +CONFIG_SENSORS_TSL2563=m +CONFIG_TSL4531=m +CONFIG_VCNL4000=m + +# +# Magnetometer sensors +# +CONFIG_AK8975=m +CONFIG_AK09911=m +CONFIG_MAG3110=m +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +CONFIG_IIO_ST_MAGN_3AXIS=m +CONFIG_IIO_ST_MAGN_I2C_3AXIS=m +CONFIG_IIO_ST_MAGN_SPI_3AXIS=m + +# +# Inclinometer sensors +# +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m + +# +# Triggers - standalone +# +CONFIG_IIO_INTERRUPT_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m + +# +# Pressure sensors +# +CONFIG_BMP280=m +CONFIG_HID_SENSOR_PRESS=m +CONFIG_MPL115=m +CONFIG_MPL3115=m +CONFIG_MS5611=m +CONFIG_MS5611_I2C=m +CONFIG_MS5611_SPI=m +CONFIG_IIO_ST_PRESS=m +CONFIG_IIO_ST_PRESS_I2C=m +CONFIG_IIO_ST_PRESS_SPI=m +CONFIG_T5403=m + +# +# Lightning sensors +# +CONFIG_AS3935=m + +# +# Proximity sensors +# +CONFIG_SX9500=m + +# +# Temperature sensors +# +CONFIG_MLX90614=m +CONFIG_TMP006=m +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_FSL_FTM is not set +CONFIG_PWM_IMX=m +CONFIG_PWM_PCA9685=m +CONFIG_PWM_SUN4I=m +CONFIG_PWM_TEGRA=m +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m +CONFIG_PWM_TIPWMSS=y +CONFIG_PWM_TWL=m +CONFIG_PWM_TWL_LED=m +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_OMAP_IRQCHIP=y +CONFIG_IRQ_CROSSBAR=y +# CONFIG_IPACK_BUS is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +# CONFIG_PHY_DM816X_USB is not set +CONFIG_OMAP_CONTROL_PHY=y +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +CONFIG_TWL4030_USB=y +# CONFIG_BCM_KONA_USB2_PHY is not set +CONFIG_PHY_SUN4I_USB=y +# CONFIG_PHY_SUN9I_USB is not set +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# Android +# +CONFIG_ANDROID=y +CONFIG_ANDROID_BINDER_IPC=y +CONFIG_ANDROID_BINDER_IPC_32BIT=y +CONFIG_NVMEM=y +CONFIG_NVMEM_SUNXI_SID=y + +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ENCRYPTION=y +CONFIG_EXT4_FS_ENCRYPTION=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_XFS_FS=y +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +# CONFIG_XFS_WARN is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_BTRFS_FS=y +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +CONFIG_NILFS2_FS=m +CONFIG_F2FS_FS=y +CONFIG_F2FS_STAT_FS=y +CONFIG_F2FS_FS_XATTR=y +CONFIG_F2FS_FS_POSIX_ACL=y +CONFIG_F2FS_FS_SECURITY=y +# CONFIG_F2FS_CHECK_FS is not set +# CONFIG_F2FS_IO_TRACE is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=m +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=y + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_HFSPLUS_FS_POSIX_ACL is not set +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_LOGFS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZ4=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +# CONFIG_HPFS_FS is not set +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m +# CONFIG_QNX6FS_DEBUG is not set +CONFIG_ROMFS_FS=m +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +# CONFIG_ROMFS_BACKED_BY_MTD is not set +CONFIG_ROMFS_BACKED_BY_BOTH=y +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_ROMFS_ON_MTD=y +# CONFIG_PSTORE is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set +CONFIG_ORE=m +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_OBJLAYOUT=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_DEBUG=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +# CONFIG_NFSD_PNFS is not set +CONFIG_NFSD_V4_SECURITY_LABEL=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_SUNRPC_SWAP=y +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC_DEBUG=y +CONFIG_CEPH_FS=m +CONFIG_CEPH_FSCACHE=y +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_SMB2=y +CONFIG_CIFS_FSCACHE=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +# CONFIG_NCPFS_SMALLDOS is not set +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +# CONFIG_AFS_DEBUG is not set +CONFIG_AFS_FSCACHE=y +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y +CONFIG_9P_FS_SECURITY=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +CONFIG_DYNAMIC_DEBUG=y + +# +# Compile-time checks and compiler options +# +# CONFIG_DEBUG_INFO is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_READABLE_ASM is not set +CONFIG_UNUSED_SYMBOLS=y +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_SCHED_STACK_END_CHECK=y +# CONFIG_DEBUG_TIMEKEEPING is not set +CONFIG_TIMER_STATS=y + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_CPU_STALL_INFO is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENT=y +CONFIG_UPROBE_EVENT=y +CONFIG_BPF_EVENTS=y +CONFIG_PROBE_EVENTS=y +CONFIG_DYNAMIC_FTRACE=y +# CONFIG_FUNCTION_PROFILER is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_TRACEPOINT_BENCHMARK is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_TRACE_ENUM_MAP_FILE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_ASYNC_RAID6_TEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_MEMTEST is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +# CONFIG_KGDB_TESTS is not set +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x1 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +# CONFIG_ARM_PTDUMP is not set +# CONFIG_STRICT_DEVMEM is not set +CONFIG_ARM_UNWIND=y +CONFIG_OLD_MCOUNT=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_LL is not set +CONFIG_DEBUG_IMX_UART_PORT=1 +CONFIG_DEBUG_VF_UART_PORT=1 +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_UART_BCM63XX is not set +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +# CONFIG_ARM_KPROBES_TEST is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_DEBUG_SET_MODULE_RONX is not set +# CONFIG_CORESIGHT is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_TRUSTED_KEYS is not set +CONFIG_ENCRYPTED_KEYS=y +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_PATH=y +CONFIG_LSM_MMAP_MIN_ADDR=32768 +CONFIG_SECURITY_SELINUX=y +# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set +# CONFIG_SECURITY_SELINUX_DISABLE is not set +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_SECURITY_TOMOYO=y +CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 +CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 +# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set +CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" +CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" +CONFIG_SECURITY_APPARMOR=y +CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_APPARMOR_HASH=y +CONFIG_SECURITY_YAMA=y +CONFIG_SECURITY_YAMA_STACKED=y +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_APPARMOR is not set +# CONFIG_DEFAULT_SECURITY_YAMA is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_MCRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ABLK_HELPER=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=y + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +# CONFIG_CRYPTO_DRBG_MENU is not set +CONFIG_CRYPTO_USER_API=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +# CONFIG_CRYPTO_USER_API_RNG is not set +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_OMAP_SHAM=m +CONFIG_CRYPTO_DEV_OMAP_AES=m +# CONFIG_CRYPTO_DEV_OMAP_DES is not set +# CONFIG_CRYPTO_DEV_SAHARA is not set +# CONFIG_ASYMMETRIC_KEY_TYPE is not set +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_SHA1_ARM_NEON=m +# CONFIG_CRYPTO_SHA1_ARM_CE is not set +# CONFIG_CRYPTO_SHA2_ARM_CE is not set +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM_NEON=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +# CONFIG_CRYPTO_AES_ARM_CE is not set +# CONFIG_CRYPTO_GHASH_ARM_CE is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=y +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_STMP_DEVICE=y +CONFIG_PERCPU_RWSEM=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=y +# CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_COMPRESS=m +CONFIG_LZ4HC_COMPRESS=m +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +# CONFIG_XZ_DEC_X86 is not set +# CONFIG_XZ_DEC_POWERPC is not set +# CONFIG_XZ_DEC_IA64 is not set +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +# CONFIG_XZ_DEC_SPARC is not set +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_BCH=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_LRU_CACHE=m +CONFIG_AVERAGE=y +CONFIG_CORDIC=m +CONFIG_DDR=y +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_VIRTUALIZATION=y diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 3a55298..aa16f7e 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -72,3 +72,9 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool + +config WAND_RFKILL + tristate "Wandboard RF Kill support" + depends on SOC_IMX6Q + default m + select RFKILL diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index e5cf587..eee36d9 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o +obj-$(CONFIG_WAND_RFKILL) += wand-rfkill.o diff --git a/arch/arm/mach-imx/devices/wand-rfkill.c b/arch/arm/mach-imx/devices/wand-rfkill.c new file mode 100644 index 0000000..da7ef9f --- /dev/null +++ b/arch/arm/mach-imx/devices/wand-rfkill.c @@ -0,0 +1,290 @@ +/* + * arch/arm/mach-imx/devices/wand-rfkill.c + * + * Copyright (C) 2013 Vladimir Ermakov + * + * based on net/rfkill/rfkill-gpio.c + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +struct wand_rfkill_data { + struct rfkill *rfkill_dev; + int shutdown_gpio; + const char *shutdown_name; +}; + +static int wand_rfkill_set_block(void *data, bool blocked) +{ + struct wand_rfkill_data *rfkill = data; + + pr_debug("wandboard-rfkill: set block %d\n", blocked); + + if (blocked) { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 0); + } else { + if (gpio_is_valid(rfkill->shutdown_gpio)) + gpio_direction_output(rfkill->shutdown_gpio, 1); + } + + return 0; +} + +static const struct rfkill_ops wand_rfkill_ops = { + .set_block = wand_rfkill_set_block, +}; + +static int wand_rfkill_wifi_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int wl_ref_on, wl_rst_n, wl_reg_on, wl_wake, wl_host_wake; + + wl_ref_on = of_get_named_gpio(np, "wifi-ref-on", 0); + wl_rst_n = of_get_named_gpio(np, "wifi-rst-n", 0); + wl_reg_on = of_get_named_gpio(np, "wifi-reg-on", 0); + wl_wake = of_get_named_gpio(np, "wifi-wake", 0); + wl_host_wake = of_get_named_gpio(np, "wifi-host-wake", 0); + + if (!gpio_is_valid(wl_rst_n) || !gpio_is_valid(wl_ref_on) || + !gpio_is_valid(wl_reg_on) || !gpio_is_valid(wl_wake) || + !gpio_is_valid(wl_host_wake)) { + + dev_err(dev, "incorrect wifi gpios (%d %d %d %d %d)\n", + wl_rst_n, wl_ref_on, wl_reg_on, wl_wake, wl_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize wifi chip\n"); + + gpio_request(wl_rst_n, "wl_rst_n"); + gpio_direction_output(wl_rst_n, 0); + msleep(11); + gpio_set_value(wl_rst_n, 1); + + gpio_request(wl_ref_on, "wl_ref_on"); + gpio_direction_output(wl_ref_on, 1); + + gpio_request(wl_reg_on, "wl_reg_on"); + gpio_direction_output(wl_reg_on, 1); + + gpio_request(wl_wake, "wl_wake"); + gpio_direction_output(wl_wake, 1); + + gpio_request(wl_host_wake, "wl_host_wake"); + gpio_direction_input(wl_host_wake); + + rfkill->shutdown_name = "wifi_shutdown"; + rfkill->shutdown_gpio = wl_wake; + + rfkill->rfkill_dev = rfkill_alloc("wifi-rfkill", dev, RFKILL_TYPE_WLAN, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto wifi_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto wifi_fail_unregister; + + dev_info(dev, "wifi-rfkill registered.\n"); + + return 0; + +wifi_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +wifi_fail_free_gpio: + if (gpio_is_valid(wl_rst_n)) gpio_free(wl_rst_n); + if (gpio_is_valid(wl_ref_on)) gpio_free(wl_ref_on); + if (gpio_is_valid(wl_reg_on)) gpio_free(wl_reg_on); + if (gpio_is_valid(wl_wake)) gpio_free(wl_wake); + if (gpio_is_valid(wl_host_wake)) gpio_free(wl_host_wake); + + return ret; +} + +static int wand_rfkill_bt_probe(struct device *dev, + struct device_node *np, + struct wand_rfkill_data *rfkill) +{ + int ret; + int bt_on, bt_wake, bt_host_wake; + + bt_on = of_get_named_gpio(np, "bluetooth-on", 0); + bt_wake = of_get_named_gpio(np, "bluetooth-wake", 0); + bt_host_wake = of_get_named_gpio(np, "bluetooth-host-wake", 0); + + if (!gpio_is_valid(bt_on) || !gpio_is_valid(bt_wake) || + !gpio_is_valid(bt_host_wake)) { + + dev_err(dev, "incorrect bt gpios (%d %d %d)\n", + bt_on, bt_wake, bt_host_wake); + return -EINVAL; + } + + dev_info(dev, "initialize bluetooth chip\n"); + + gpio_request(bt_on, "bt_on"); + gpio_direction_output(bt_on, 0); + msleep(11); + gpio_set_value(bt_on, 1); + + gpio_request(bt_wake, "bt_wake"); + gpio_direction_output(bt_wake, 1); + + gpio_request(bt_host_wake, "bt_host_wake"); + gpio_direction_input(bt_host_wake); + + rfkill->shutdown_name = "bluetooth_shutdown"; + rfkill->shutdown_gpio = bt_wake; + + rfkill->rfkill_dev = rfkill_alloc("bluetooth-rfkill", dev, RFKILL_TYPE_BLUETOOTH, + &wand_rfkill_ops, rfkill); + if (!rfkill->rfkill_dev) { + ret = -ENOMEM; + goto bt_fail_free_gpio; + } + + ret = rfkill_register(rfkill->rfkill_dev); + if (ret < 0) + goto bt_fail_unregister; + + dev_info(dev, "bluetooth-rfkill registered.\n"); + + return 0; + +bt_fail_unregister: + rfkill_destroy(rfkill->rfkill_dev); +bt_fail_free_gpio: + if (gpio_is_valid(bt_on)) gpio_free(bt_on); + if (gpio_is_valid(bt_wake)) gpio_free(bt_wake); + if (gpio_is_valid(bt_host_wake)) gpio_free(bt_host_wake); + + return ret; +} + +static int wand_rfkill_probe(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill; + struct pinctrl *pinctrl; + int ret; + + dev_info(&pdev->dev, "Wandboard rfkill initialization\n"); + + if (!pdev->dev.of_node) { + dev_err(&pdev->dev, "no device tree node\n"); + return -ENODEV; + } + + rfkill = kzalloc(sizeof(*rfkill) * 2, GFP_KERNEL); + if (!rfkill) + return -ENOMEM; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + int ret = PTR_ERR(pinctrl); + dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret); + return ret; + } + + /* setup WiFi */ + ret = wand_rfkill_wifi_probe(&pdev->dev, pdev->dev.of_node, &rfkill[0]); + if (ret < 0) + goto fail_free_rfkill; + + /* setup bluetooth */ + ret = wand_rfkill_bt_probe(&pdev->dev, pdev->dev.of_node, &rfkill[1]); + if (ret < 0) + goto fail_unregister_wifi; + + platform_set_drvdata(pdev, rfkill); + + return 0; + +fail_unregister_wifi: + if (rfkill[1].rfkill_dev) { + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + } + + /* TODO free gpio */ + +fail_free_rfkill: + kfree(rfkill); + + return ret; +} + +static int wand_rfkill_remove(struct platform_device *pdev) +{ + struct wand_rfkill_data *rfkill = platform_get_drvdata(pdev); + + dev_info(&pdev->dev, "Module unloading\n"); + + if (!rfkill) + return 0; + + /* WiFi */ + if (gpio_is_valid(rfkill[0].shutdown_gpio)) + gpio_free(rfkill[0].shutdown_gpio); + + rfkill_unregister(rfkill[0].rfkill_dev); + rfkill_destroy(rfkill[0].rfkill_dev); + + /* Bt */ + if (gpio_is_valid(rfkill[1].shutdown_gpio)) + gpio_free(rfkill[1].shutdown_gpio); + + rfkill_unregister(rfkill[1].rfkill_dev); + rfkill_destroy(rfkill[1].rfkill_dev); + + kfree(rfkill); + + return 0; +} + +static struct of_device_id wand_rfkill_match[] = { + { .compatible = "wand,imx6q-wandboard-rfkill", }, + { .compatible = "wand,imx6dl-wandboard-rfkill", }, + { .compatible = "wand,imx6qdl-wandboard-rfkill", }, + {} +}; + +static struct platform_driver wand_rfkill_driver = { + .driver = { + .name = "wandboard-rfkill", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(wand_rfkill_match), + }, + .probe = wand_rfkill_probe, + .remove = wand_rfkill_remove +}; + +module_platform_driver(wand_rfkill_driver); + +MODULE_AUTHOR("Vladimir Ermakov "); +MODULE_DESCRIPTION("Wandboard rfkill driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ec002bd..9a2c88e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -277,8 +277,5 @@ obj-y += $(nand-m) $(nand-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) -ifneq ($(CONFIG_HWSPINLOCK_OMAP),) -obj-y += hwspinlock.o -endif obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index f251a14..882f5c0 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -52,6 +52,14 @@ #define DPLL_FINT_UNDERFLOW -1 #define DPLL_FINT_INVALID -2 +/* copied from clock3xxx.c */ +/* + * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks + * that are sourced by DPLL5, and both of these require this clock + * to be at 120 MHz for proper operation. + */ +#define DPLL5_FREQ_FOR_USBHOST 120000000 + /* Private functions */ /* @@ -368,3 +376,62 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, return dd->last_rounded_rate; } +struct sprz319e_2_1_values { + unsigned long sys_clk_rate; + int m, n, div120m; +}; + +/** + * omap2_dpll5_round_rate - round a target rate for OMAP DPLL5 + * according to DM37xx sprz319e 2.1 erratum + * + * @clk: struct clk * for a DPLL (presumably DPLL5) + * @target_rate: desired DPLL clock rate + * + * The erratum applies only for DM37xx, desired clock rates of + * div120m times 120 MHz and specified sys_clks. + */ +long omap2_dpll5_round_rate(struct clk_hw *hw, unsigned long target_rate, + unsigned long *parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + const char *clk_name; + int i; + + /* erratum tables */ + const struct sprz319e_2_1_values sprz319e_2_1_table[] = { + /* table 35 */ + { 12000000, 80, 0, 8 }, + { 19200000, 50, 0, 8 }, + { 38400000, 25, 0, 8 }, + /* table 36 */ + { 13000000, 443, 5, 8 }, + { 26000000, 443, 11, 8 }, + }; + + if (!clk || !clk->dpll_data) + return ~0; + + dd = clk->dpll_data; + + clk_name = __clk_get_name(hw->clk); + + for (i = 0; i < (sizeof(sprz319e_2_1_table)/sizeof(struct sprz319e_2_1_values)); i++) { + const struct sprz319e_2_1_values *v = &sprz319e_2_1_table[i]; + + if (*parent_rate == v->sys_clk_rate && + target_rate == DPLL5_FREQ_FOR_USBHOST * v->div120m) { + + pr_info("clock: dpll5: Applying SPRZ319E 2.1: %8lu, %3d, %3d, %3d\n", + v->sys_clk_rate, v->m, v->n, v->div120m); + + dd->last_rounded_m = v->m; + dd->last_rounded_n = v->n + 1; + dd->last_rounded_rate = v->sys_clk_rate * v->m / (v->n + 1); + + return dd->last_rounded_rate; + } + } + return target_rate; +} diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index a9e86db..858c91c 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -96,7 +96,14 @@ void __init omap3_clk_lock_dpll5(void) struct clk *dpll5_m2_clk; dpll5_clk = clk_get(NULL, "dpll5_ck"); - clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); + + if (cpu_is_omap3630()) { + pr_info("clock: dpll5: dpll5_clk omap3630\n"); + clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST * 8); + } else { + clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); + } + clk_prepare_enable(dpll5_clk); /* Program dpll5_m2_clk divider for no division */ diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 44e57ec..1901eac 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -501,6 +501,35 @@ long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate, return rate; } +long omap3630_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + + if (!hw || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (__clk_get_rate(dd->clk_bypass) == rate && + (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + *best_parent_clk = __clk_get_hw(dd->clk_bypass); + } else { + rate = omap2_dpll5_round_rate(hw, rate, best_parent_rate); + *best_parent_clk = __clk_get_hw(dd->clk_ref); + } + + *best_parent_rate = rate; + + return rate; +} + /** * omap3_noncore_dpll_set_parent - set parent for a DPLL clock * @hw: pointer to the clock to set parent for diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c deleted file mode 100644 index ef175ac..0000000 --- a/arch/arm/mach-omap2/hwspinlock.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * OMAP hardware spinlock device initialization - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com - * - * Contact: Simon Que - * Hari Kanigeri - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include -#include -#include -#include - -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" - -static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { - .base_id = 0, -}; - -static int __init hwspinlocks_init(void) -{ - int retval = 0; - struct omap_hwmod *oh; - struct platform_device *pdev; - const char *oh_name = "spinlock"; - const char *dev_name = "omap_hwspinlock"; - - /* - * Hwmod lookup will fail in case our platform doesn't support the - * hardware spinlock module, so it is safe to run this initcall - * on all omaps - */ - oh = omap_hwmod_lookup(oh_name); - if (oh == NULL) - return -EINVAL; - - pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata, - sizeof(struct hwspinlock_pdata)); - if (IS_ERR(pdev)) { - pr_err("Can't build omap_device for %s:%s\n", dev_name, - oh_name); - retval = PTR_ERR(pdev); - } - - return retval; -} -/* early board code might need to reserve specific hwspinlock instances */ -omap_postcore_initcall(hwspinlocks_init); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 166b18f..62f5082 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -128,8 +128,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct omap_device *od; struct omap_hwmod *oh; struct device_node *node = pdev->dev.of_node; - const char *oh_name; - int oh_cnt, i, ret = 0; + const char *oh_name, *rst_name; + int oh_cnt, dstr_cnt, i, ret = 0; bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); @@ -180,6 +180,26 @@ static int omap_device_build_from_dt(struct platform_device *pdev) omap_device_enable(pdev); pm_runtime_set_active(&pdev->dev); } + dstr_cnt = + of_property_count_strings(node, "ti,deassert-hard-reset"); + if (dstr_cnt > 0) { + for (i = 0; i < dstr_cnt; i += 2) { + of_property_read_string_index( + node, "ti,deassert-hard-reset", i, + &oh_name); + of_property_read_string_index( + node, "ti,deassert-hard-reset", i+1, + &rst_name); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + dev_warn(&pdev->dev, + "Cannot parse deassert property for '%s'\n", + oh_name); + break; + } + omap_hwmod_deassert_hardreset(oh, rst_name); + } + } odbfd_exit1: kfree(hwmods); @@ -191,6 +211,26 @@ odbfd_exit: return ret; } +static void _omap_device_cleanup(struct omap_device *od) +{ + struct omap_hwmod *oh; + int i; + + for (i = 0; i < od->hwmods_cnt; i++) { + + oh = od->hwmods[i]; + + /* shutdown hwmods */ + omap_hwmod_shutdown(oh); + + /* we don't remove clocks cause there's no API to do so */ + /* no harm done, since they will not be created next time */ + } + + /* cleanup the structure now */ + omap_device_delete(od); +} + static int _omap_device_notifier_call(struct notifier_block *nb, unsigned long event, void *dev) { @@ -198,9 +238,12 @@ static int _omap_device_notifier_call(struct notifier_block *nb, struct omap_device *od; switch (event) { - case BUS_NOTIFY_DEL_DEVICE: - if (pdev->archdata.od) - omap_device_delete(pdev->archdata.od); + case BUS_NOTIFY_UNBOUND_DRIVER: + /* NOTIFY_DEL_DEVICE is not the right call... */ + od = pdev->archdata.od; + pdev->archdata.od = NULL; + if (od) + _omap_device_cleanup(od); break; case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) diff --git a/drivers/Kconfig b/drivers/Kconfig index c0cc96b..69d7305 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -182,4 +182,6 @@ source "drivers/thunderbolt/Kconfig" source "drivers/android/Kconfig" +source "drivers/nvmem/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 46d2554..f86b897 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -165,3 +165,4 @@ obj-$(CONFIG_RAS) += ras/ obj-$(CONFIG_THUNDERBOLT) += thunderbolt/ obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/ obj-$(CONFIG_ANDROID) += android/ +obj-$(CONFIG_NVMEM) += nvmem/ diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 1c76dcb..4b6a7ad 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -2612,6 +2612,30 @@ int regmap_get_val_bytes(struct regmap *map) } EXPORT_SYMBOL_GPL(regmap_get_val_bytes); +/** + * regmap_get_max_register(): Report the max register value + * + * Report the max register value, mainly intended to for use by + * generic infrastructure built on top of regmap. + */ +int regmap_get_max_register(struct regmap *map) +{ + return map->max_register ? map->max_register : -EINVAL; +} +EXPORT_SYMBOL_GPL(regmap_get_max_register); + +/** + * regmap_get_reg_stride(): Report the register address stride + * + * Report the register address stride, mainly intended to for use by + * generic infrastructure built on top of regmap. + */ +int regmap_get_reg_stride(struct regmap *map) +{ + return map->reg_stride; +} +EXPORT_SYMBOL_GPL(regmap_get_reg_stride); + int regmap_parse_val(struct regmap *map, const void *buf, unsigned int *val) { diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 11478a5..abafb2e 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -23,6 +23,8 @@ #include #include "clock.h" +static u8 omap3630_dpll_usb_clock_errata = 0; + #undef pr_fmt #define pr_fmt(fmt) "%s: " fmt, __func__ @@ -113,6 +115,18 @@ static const struct clk_ops omap3_dpll_ck_ops = { .round_rate = &omap2_dpll_round_rate, }; +static const struct clk_ops omap3_dpll_ck_ops_3630 = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3630_noncore_dpll_determine_rate, + .round_rate = &omap2_dpll5_round_rate, +}; + static const struct clk_ops omap3_dpll_per_ck_ops = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, @@ -124,6 +138,18 @@ static const struct clk_ops omap3_dpll_per_ck_ops = { .determine_rate = &omap3_noncore_dpll_determine_rate, .round_rate = &omap2_dpll_round_rate, }; + +static const struct clk_ops omap3_dpll_per_ck_ops_3630 = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .set_rate = &omap3_dpll4_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent, + .determine_rate = &omap3630_noncore_dpll_determine_rate, + .round_rate = &omap2_dpll5_round_rate, +}; #endif static const struct clk_ops dpll_x2_ck_ops = { @@ -201,6 +227,10 @@ struct clk *ti_clk_register_dpll(struct ti_clk *setup) struct clk *clk_ref; struct clk *clk_bypass; + if (omap3630_dpll_usb_clock_errata) { + ops = &omap3_dpll_ck_ops_3630; + } + dpll = setup->data; if (dpll->num_parents < 2) @@ -256,8 +286,17 @@ struct clk *ti_clk_register_dpll(struct ti_clk *setup) if (dpll->flags & CLKF_CORE) ops = &omap3_dpll_core_ck_ops; - if (dpll->flags & CLKF_PER) - ops = &omap3_dpll_per_ck_ops; + if (omap3630_dpll_usb_clock_errata) { + + if (dpll->flags & CLKF_PER) + ops = &omap3_dpll_per_ck_ops_3630; + + } else { + + if (dpll->flags & CLKF_PER) + ops = &omap3_dpll_per_ck_ops; + + } if (dpll->flags & CLKF_J_TYPE) dd->flags |= DPLL_J_TYPE; @@ -414,6 +453,11 @@ static void __init of_ti_dpll_setup(struct device_node *node, if (of_property_read_bool(node, "ti,lock")) dpll_mode |= 1 << DPLL_LOCKED; + if (of_property_read_bool(node, "ti,omap3630-dpll-usb-clock-errata")){ + omap3630_dpll_usb_clock_errata = 1; + pr_info("clock: omap3630-dpll-usb-clock-errata\n"); + } + if (dpll_mode) dd->modes = dpll_mode; @@ -462,7 +506,11 @@ static void __init of_ti_omap3_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd); + if (omap3630_dpll_usb_clock_errata) { + of_ti_dpll_setup(node, &omap3_dpll_ck_ops_3630, &dd); + } else { + of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd); + } } CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock", of_ti_omap3_dpll_setup); @@ -501,7 +549,11 @@ static void __init of_ti_omap3_per_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); + if (omap3630_dpll_usb_clock_errata) { + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops_3630, &dd); + } else { + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); + } } CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock", of_ti_omap3_per_dpll_setup); @@ -523,7 +575,11 @@ static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); + if (omap3630_dpll_usb_clock_errata) { + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops_3630, &dd); + } else { + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); + } } CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock", of_ti_omap3_per_jtype_dpll_setup); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index caefe80..a15f182 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -85,6 +85,20 @@ config GPIO_SYSFS Kernel drivers may also request that a particular GPIO be exported to userspace; this can be useful when debugging. +config GPIO_OF_HELPER + bool "GPIO OF helper device (EXPERIMENTAL)" + depends on OF_GPIO + help + Say Y here to add an GPIO OF helper driver + + Allows you specify a GPIO helper based on OF + which allows simple export of GPIO functionality + in user-space. + + Features include, value set/get, direction control, + interrupt/value change poll support, event counting + and others. + config GPIO_GENERIC tristate diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index f71bb97..a527a82 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o obj-$(CONFIG_OF_GPIO) += gpiolib-of.o obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o +obj-$(CONFIG_GPIO_OF_HELPER) += gpio-of-helper.o # Device drivers. Generally keep list sorted alphabetically obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o diff --git a/drivers/gpio/gpio-of-helper.c b/drivers/gpio/gpio-of-helper.c new file mode 100644 index 0000000..a9f260b --- /dev/null +++ b/drivers/gpio/gpio-of-helper.c @@ -0,0 +1,429 @@ +/* + * GPIO OF based helper + * + * A simple DT based driver to provide access to GPIO functionality + * to user-space via sysfs. + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* fwd decl. */ +struct gpio_of_helper_info; + +enum gpio_type { + GPIO_TYPE_INPUT = 0, + GPIO_TYPE_OUTPUT = 1, +}; + +struct gpio_of_entry { + int id; + struct gpio_of_helper_info *info; + struct device_node *node; + enum gpio_type type; + int gpio; + enum of_gpio_flags gpio_flags; + int irq; + const char *name; + atomic64_t counter; + unsigned int count_flags; +#define COUNT_RISING_EDGE (1 << 0) +#define COUNT_FALLING_EDGE (1 << 1) +}; + +struct gpio_of_helper_info { + struct platform_device *pdev; + struct idr idr; +}; + +static const struct of_device_id gpio_of_helper_of_match[] = { + { + .compatible = "gpio-of-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_of_helper_of_match); + +static ssize_t gpio_of_helper_show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + char *p, *e; + int id, n; + + p = buf; + e = p + PAGE_SIZE; + n = 0; + idr_for_each_entry(&info->idr, entry, id) { + switch (entry->type) { + case GPIO_TYPE_INPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s %llu\n", + entry->id, entry->name, entry->gpio, "IN", + (unsigned long long) + atomic64_read(&entry->counter)); + break; + case GPIO_TYPE_OUTPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s\n", + entry->id, entry->name, entry->gpio, "OUT"); + break; + } + p += n; + } + + return p - buf; +} + +static DEVICE_ATTR(status, S_IRUGO, + gpio_of_helper_show_status, NULL); + +static irqreturn_t gpio_of_helper_handler(int irq, void *ptr) +{ + struct gpio_of_entry *entry = ptr; + + /* caution - low speed interfaces only! */ + atomic64_inc(&entry->counter); + + return IRQ_HANDLED; +} + +static struct gpio_of_entry * +gpio_of_entry_create(struct gpio_of_helper_info *info, + struct device_node *node) +{ + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + struct gpio_of_entry *entry; + int err, gpio, irq; + unsigned int req_flags, count_flags, irq_flags; + enum gpio_type type; + enum of_gpio_flags gpio_flags; + const char *name; + + /* get the type of the node first */ + if (of_property_read_bool(node, "input")) + type = GPIO_TYPE_INPUT; + else if (of_property_read_bool(node, "output")) + type = GPIO_TYPE_OUTPUT; + else { + dev_err(dev, "Not valid gpio node type\n"); + err = -EINVAL; + goto err_bad_node; + } + + /* get the name */ + err = of_property_read_string(node, "gpio-name", &name); + if (err != 0) { + dev_err(dev, "Failed to get name property\n"); + goto err_bad_node; + } + + err = of_get_named_gpio_flags(node, "gpio", 0, &gpio_flags); + if (IS_ERR_VALUE(err)) { + dev_err(dev, "Failed to get gpio property of '%s'\n", name); + goto err_bad_node; + } + gpio = err; + + req_flags = 0; + count_flags = 0; + + /* set the request flags */ + switch (type) { + case GPIO_TYPE_INPUT: + req_flags = GPIOF_DIR_IN | GPIOF_EXPORT; + if (of_property_read_bool(node, "count-falling-edge")) + count_flags |= COUNT_FALLING_EDGE; + if (of_property_read_bool(node, "count-rising-edge")) + count_flags |= COUNT_RISING_EDGE; + break; + case GPIO_TYPE_OUTPUT: + req_flags = GPIOF_DIR_OUT | GPIOF_EXPORT; + if (of_property_read_bool(node, "init-high")) + req_flags |= GPIOF_OUT_INIT_HIGH; + else if (of_property_read_bool(node, "init-low")) + req_flags |= GPIOF_OUT_INIT_LOW; + break; + } + if (of_property_read_bool(node, "dir-changeable")) + req_flags |= GPIOF_EXPORT_CHANGEABLE; + + /* request the gpio */ + err = devm_gpio_request_one(dev, gpio, req_flags, name); + if (err != 0) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + irq = -1; + irq_flags = 0; + + /* counter mode requested - need an interrupt */ + if (count_flags != 0) { + irq = gpio_to_irq(gpio); + if (IS_ERR_VALUE(irq)) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + if (count_flags & COUNT_RISING_EDGE) + irq_flags |= IRQF_TRIGGER_RISING; + if (count_flags & COUNT_FALLING_EDGE) + irq_flags |= IRQF_TRIGGER_FALLING; + } + +// if (!idr_pre_get(&info->idr, GFP_KERNEL)) { +// dev_err(dev, "Failed on idr_pre_get of '%s'\n", name); +// err = -ENOMEM; +// goto err_no_mem; +// } + + idr_preload(GFP_KERNEL); + + entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL); + if (entry == NULL) { + dev_err(dev, "Failed to allocate gpio entry of '%s'\n", name); + err = -ENOMEM; + goto err_no_mem; + } + + entry->id = -1; + entry->info = info; + entry->node = of_node_get(node); /* get node reference */ + entry->type = type; + entry->gpio = gpio; + entry->gpio_flags = gpio_flags; + entry->irq = irq; + entry->name = name; + + /* interrupt enable is last thing done */ + if (irq >= 0) { + atomic64_set(&entry->counter, 0); + entry->count_flags = count_flags; + err = devm_request_irq(dev, irq, gpio_of_helper_handler, + irq_flags, name, entry); + if (err != 0) { + dev_err(dev, "Failed to request irq of '%s'\n", name); + goto err_no_irq; + } + } + + /* all done; insert */ +// err = idr_get_new(&info->idr, entry, &entry->id); +// if (IS_ERR_VALUE(err)) { +// dev_err(dev, "Failed to idr_get_new of '%s'\n", name); +// goto err_fail_idr; +// } + + err = idr_alloc(&info->idr, entry, 0, 0, GFP_NOWAIT); + if (err >= 0) + entry->id = err; + + idr_preload_end(); + + if (err < 0) { + dev_err(dev, "Failed to idr_get_new of '%s'\n", name); + goto err_fail_idr; + } + + dev_info(dev, "Allocated GPIO id=%d\n", entry->id); + + return entry; + +err_fail_idr: + /* nothing to do */ +err_no_irq: + /* release node ref */ + of_node_put(node); + /* nothing else needs to be done, devres handles it */ +err_no_mem: +err_bad_node: + return ERR_PTR(err); +} + +static int gpio_of_entry_destroy(struct gpio_of_entry *entry) +{ + struct gpio_of_helper_info *info = entry->info; + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + + dev_info(dev, "Destroying GPIO id=%d\n", entry->id); + + /* remove from the IDR */ + idr_remove(&info->idr, entry->id); + + /* remove node ref */ + of_node_put(entry->node); + + /* free gpio */ + devm_gpio_free(dev, entry->gpio); + + /* gree irq */ + if (entry->irq >= 0) + devm_free_irq(dev, entry->irq, entry); + + /* and free */ + devm_kfree(dev, entry); + + return 0; +} + +static int gpio_of_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_of_helper_info *info; + struct gpio_of_entry *entry; + struct device_node *pnode = pdev->dev.of_node; + struct device_node *cnode; + struct pinctrl *pinctrl; + int err; + + /* we only support OF */ + if (pnode == NULL) { + dev_err(&pdev->dev, "No platform of_node!\n"); + return -ENODEV; + } + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + /* special handling for probe defer */ + if (PTR_ERR(pinctrl) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + } + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (info == NULL) { + dev_err(&pdev->dev, "Failed to allocate info\n"); + err = -ENOMEM; + goto err_no_mem; + } + platform_set_drvdata(pdev, info); + info->pdev = pdev; + + idr_init(&info->idr); + + err = device_create_file(dev, &dev_attr_status); + if (err != 0) { + dev_err(dev, "Failed to create status sysfs attribute\n"); + goto err_no_sysfs; + } + + for_each_child_of_node(pnode, cnode) { + + entry = gpio_of_entry_create(info, cnode); + if (IS_ERR_OR_NULL(entry)) { + dev_err(dev, "Failed to create gpio entry\n"); + err = PTR_ERR(entry); + goto err_fail_entry; + } + } + + dev_info(&pdev->dev, "ready\n"); + + return 0; +err_fail_entry: + device_remove_file(&pdev->dev, &dev_attr_status); +err_no_sysfs: +err_no_mem: + return err; +} + +static int gpio_of_helper_remove(struct platform_device *pdev) +{ + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + int id; + + dev_info(&pdev->dev, "removing\n"); + + device_remove_file(&pdev->dev, &dev_attr_status); + + id = 0; + idr_for_each_entry(&info->idr, entry, id) { + /* destroy each and every one */ + gpio_of_entry_destroy(entry); + } + + return 0; +} + +#ifdef CONFIG_PM +//#ifdef CONFIG_PM_RUNTIME +static int gpio_of_helper_runtime_suspend(struct device *dev) +{ + /* place holder */ + return 0; +} + +static int gpio_of_helper_runtime_resume(struct device *dev) +{ + /* place holder */ + return 0; +} +//#endif /* CONFIG_PM_RUNTIME */ + +static struct dev_pm_ops gpio_of_helper_pm_ops = { + SET_RUNTIME_PM_OPS(gpio_of_helper_runtime_suspend, + gpio_of_helper_runtime_resume, NULL) +}; +#define GPIO_OF_HELPER_PM_OPS (&gpio_of_helper_pm_ops) +#else +#define GPIO_OF_HELPER_PM_OPS NULL +#endif /* CONFIG_PM */ + +struct platform_driver gpio_of_helper_driver = { + .probe = gpio_of_helper_probe, + .remove = gpio_of_helper_remove, + .driver = { + .name = "gpio-of-helper", + .owner = THIS_MODULE, + .pm = GPIO_OF_HELPER_PM_OPS, + .of_match_table = gpio_of_helper_of_match, + }, +}; + +module_platform_driver(gpio_of_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou "); +MODULE_DESCRIPTION("GPIO OF Helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-of-helper"); diff --git a/drivers/gpu/drm/imx/imx-tve.c b/drivers/gpu/drm/imx/imx-tve.c index 214ecee..e671ad3 100644 --- a/drivers/gpu/drm/imx/imx-tve.c +++ b/drivers/gpu/drm/imx/imx-tve.c @@ -301,7 +301,7 @@ static void imx_tve_encoder_prepare(struct drm_encoder *encoder) switch (tve->mode) { case TVE_MODE_VGA: - imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_YUV8_1X24, + imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_GBR888_1X24, tve->hsync_pin, tve->vsync_pin); break; case TVE_MODE_TVOUT: diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig index 3612cb5..73a4016 100644 --- a/drivers/hwspinlock/Kconfig +++ b/drivers/hwspinlock/Kconfig @@ -18,6 +18,30 @@ config HWSPINLOCK_OMAP If unsure, say N. +config HWSPINLOCK_QCOM + tristate "Qualcomm Hardware Spinlock device" + depends on ARCH_QCOM + select HWSPINLOCK + select MFD_SYSCON + help + Say y here to support the Qualcomm Hardware Mutex functionality, which + provides a synchronisation mechanism for the various processors on + the SoC. + + If unsure, say N. + +config HWSPINLOCK_SIRF + tristate "SIRF Hardware Spinlock device" + depends on ARCH_SIRF + select HWSPINLOCK + help + Say y here to support the SIRF Hardware Spinlock device, which + provides a synchronisation mechanism for the various processors + on the SoC. + + It's safe to say n here if you're not interested in SIRF hardware + spinlock or just want a bare minimum kernel. + config HSEM_U8500 tristate "STE Hardware Semaphore functionality" depends on ARCH_U8500 diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile index 93eb64b..6b59cb5a 100644 --- a/drivers/hwspinlock/Makefile +++ b/drivers/hwspinlock/Makefile @@ -4,4 +4,6 @@ obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o +obj-$(CONFIG_HWSPINLOCK_QCOM) += qcom_hwspinlock.o +obj-$(CONFIG_HWSPINLOCK_SIRF) += sirf_hwspinlock.o obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c index 461a0d7..52f708b 100644 --- a/drivers/hwspinlock/hwspinlock_core.c +++ b/drivers/hwspinlock/hwspinlock_core.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "hwspinlock_internal.h" @@ -257,6 +258,84 @@ void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags) } EXPORT_SYMBOL_GPL(__hwspin_unlock); +/** + * of_hwspin_lock_simple_xlate - translate hwlock_spec to return a lock id + * @bank: the hwspinlock device bank + * @hwlock_spec: hwlock specifier as found in the device tree + * + * This is a simple translation function, suitable for hwspinlock platform + * drivers that only has a lock specifier length of 1. + * + * Returns a relative index of the lock within a specified bank on success, + * or -EINVAL on invalid specifier cell count. + */ +static inline int +of_hwspin_lock_simple_xlate(const struct of_phandle_args *hwlock_spec) +{ + if (WARN_ON(hwlock_spec->args_count != 1)) + return -EINVAL; + + return hwlock_spec->args[0]; +} + +/** + * of_hwspin_lock_get_id() - get lock id for an OF phandle-based specific lock + * @np: device node from which to request the specific hwlock + * @index: index of the hwlock in the list of values + * + * This function provides a means for DT users of the hwspinlock module to + * get the global lock id of a specific hwspinlock using the phandle of the + * hwspinlock device, so that it can be requested using the normal + * hwspin_lock_request_specific() API. + * + * Returns the global lock id number on success, -EPROBE_DEFER if the hwspinlock + * device is not yet registered, -EINVAL on invalid args specifier value or an + * appropriate error as returned from the OF parsing of the DT client node. + */ +int of_hwspin_lock_get_id(struct device_node *np, int index) +{ + struct of_phandle_args args; + struct hwspinlock *hwlock; + struct radix_tree_iter iter; + void **slot; + int id; + int ret; + + ret = of_parse_phandle_with_args(np, "hwlocks", "#hwlock-cells", index, + &args); + if (ret) + return ret; + + /* Find the hwspinlock device: we need its base_id */ + ret = -EPROBE_DEFER; + rcu_read_lock(); + radix_tree_for_each_slot(slot, &hwspinlock_tree, &iter, 0) { + hwlock = radix_tree_deref_slot(slot); + if (unlikely(!hwlock)) + continue; + + if (hwlock->bank->dev->of_node == args.np) { + ret = 0; + break; + } + } + rcu_read_unlock(); + if (ret < 0) + goto out; + + id = of_hwspin_lock_simple_xlate(&args); + if (id < 0 || id >= hwlock->bank->num_locks) { + ret = -EINVAL; + goto out; + } + id += hwlock->bank->base_id; + +out: + of_node_put(args.np); + return ret ? ret : id; +} +EXPORT_SYMBOL_GPL(of_hwspin_lock_get_id); + static int hwspin_lock_register_single(struct hwspinlock *hwlock, int id) { struct hwspinlock *tmp; diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c index 47a275c..ad2f8ca 100644 --- a/drivers/hwspinlock/omap_hwspinlock.c +++ b/drivers/hwspinlock/omap_hwspinlock.c @@ -1,7 +1,7 @@ /* * OMAP hardware spinlock driver * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2010-2015 Texas Instruments Incorporated - http://www.ti.com * * Contact: Simon Que * Hari Kanigeri @@ -27,6 +27,7 @@ #include #include #include +#include #include #include "hwspinlock_internal.h" @@ -80,14 +81,16 @@ static const struct hwspinlock_ops omap_hwspinlock_ops = { static int omap_hwspinlock_probe(struct platform_device *pdev) { - struct hwspinlock_pdata *pdata = pdev->dev.platform_data; + struct device_node *node = pdev->dev.of_node; struct hwspinlock_device *bank; struct hwspinlock *hwlock; struct resource *res; void __iomem *io_base; int num_locks, i, ret; + /* Only a single hwspinlock block device is supported */ + int base_id = 0; - if (!pdata) + if (!node) return -ENODEV; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -141,7 +144,7 @@ static int omap_hwspinlock_probe(struct platform_device *pdev) hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i; ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops, - pdata->base_id, num_locks); + base_id, num_locks); if (ret) goto reg_fail; @@ -174,11 +177,18 @@ static int omap_hwspinlock_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id omap_hwspinlock_of_match[] = { + { .compatible = "ti,omap4-hwspinlock", }, + { /* end */ }, +}; +MODULE_DEVICE_TABLE(of, omap_hwspinlock_of_match); + static struct platform_driver omap_hwspinlock_driver = { .probe = omap_hwspinlock_probe, .remove = omap_hwspinlock_remove, .driver = { .name = "omap_hwspinlock", + .of_match_table = of_match_ptr(omap_hwspinlock_of_match), }, }; diff --git a/drivers/hwspinlock/qcom_hwspinlock.c b/drivers/hwspinlock/qcom_hwspinlock.c new file mode 100644 index 0000000..c752447 --- /dev/null +++ b/drivers/hwspinlock/qcom_hwspinlock.c @@ -0,0 +1,181 @@ +/* + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * Copyright (c) 2015, Sony Mobile Communications AB + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hwspinlock_internal.h" + +#define QCOM_MUTEX_APPS_PROC_ID 1 +#define QCOM_MUTEX_NUM_LOCKS 32 + +static int qcom_hwspinlock_trylock(struct hwspinlock *lock) +{ + struct regmap_field *field = lock->priv; + u32 lock_owner; + int ret; + + ret = regmap_field_write(field, QCOM_MUTEX_APPS_PROC_ID); + if (ret) + return ret; + + ret = regmap_field_read(field, &lock_owner); + if (ret) + return ret; + + return lock_owner == QCOM_MUTEX_APPS_PROC_ID; +} + +static void qcom_hwspinlock_unlock(struct hwspinlock *lock) +{ + struct regmap_field *field = lock->priv; + u32 lock_owner; + int ret; + + ret = regmap_field_read(field, &lock_owner); + if (ret) { + pr_err("%s: unable to query spinlock owner\n", __func__); + return; + } + + if (lock_owner != QCOM_MUTEX_APPS_PROC_ID) { + pr_err("%s: spinlock not owned by us (actual owner is %d)\n", + __func__, lock_owner); + } + + ret = regmap_field_write(field, 0); + if (ret) + pr_err("%s: failed to unlock spinlock\n", __func__); +} + +static const struct hwspinlock_ops qcom_hwspinlock_ops = { + .trylock = qcom_hwspinlock_trylock, + .unlock = qcom_hwspinlock_unlock, +}; + +static const struct of_device_id qcom_hwspinlock_of_match[] = { + { .compatible = "qcom,sfpb-mutex" }, + { .compatible = "qcom,tcsr-mutex" }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_hwspinlock_of_match); + +static int qcom_hwspinlock_probe(struct platform_device *pdev) +{ + struct hwspinlock_device *bank; + struct device_node *syscon; + struct reg_field field; + struct regmap *regmap; + size_t array_size; + u32 stride; + u32 base; + int ret; + int i; + + syscon = of_parse_phandle(pdev->dev.of_node, "syscon", 0); + if (!syscon) { + dev_err(&pdev->dev, "no syscon property\n"); + return -ENODEV; + } + + regmap = syscon_node_to_regmap(syscon); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 1, &base); + if (ret < 0) { + dev_err(&pdev->dev, "no offset in syscon\n"); + return -EINVAL; + } + + ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 2, &stride); + if (ret < 0) { + dev_err(&pdev->dev, "no stride syscon\n"); + return -EINVAL; + } + + array_size = QCOM_MUTEX_NUM_LOCKS * sizeof(struct hwspinlock); + bank = devm_kzalloc(&pdev->dev, sizeof(*bank) + array_size, GFP_KERNEL); + if (!bank) + return -ENOMEM; + + platform_set_drvdata(pdev, bank); + + for (i = 0; i < QCOM_MUTEX_NUM_LOCKS; i++) { + field.reg = base + i * stride; + field.lsb = 0; + field.msb = 31; + + bank->lock[i].priv = devm_regmap_field_alloc(&pdev->dev, + regmap, field); + } + + pm_runtime_enable(&pdev->dev); + + ret = hwspin_lock_register(bank, &pdev->dev, &qcom_hwspinlock_ops, + 0, QCOM_MUTEX_NUM_LOCKS); + if (ret) + pm_runtime_disable(&pdev->dev); + + return ret; +} + +static int qcom_hwspinlock_remove(struct platform_device *pdev) +{ + struct hwspinlock_device *bank = platform_get_drvdata(pdev); + int ret; + + ret = hwspin_lock_unregister(bank); + if (ret) { + dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret); + return ret; + } + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static struct platform_driver qcom_hwspinlock_driver = { + .probe = qcom_hwspinlock_probe, + .remove = qcom_hwspinlock_remove, + .driver = { + .name = "qcom_hwspinlock", + .of_match_table = qcom_hwspinlock_of_match, + }, +}; + +static int __init qcom_hwspinlock_init(void) +{ + return platform_driver_register(&qcom_hwspinlock_driver); +} +/* board init code might need to reserve hwspinlocks for predefined purposes */ +postcore_initcall(qcom_hwspinlock_init); + +static void __exit qcom_hwspinlock_exit(void) +{ + platform_driver_unregister(&qcom_hwspinlock_driver); +} +module_exit(qcom_hwspinlock_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Hardware spinlock driver for Qualcomm SoCs"); diff --git a/drivers/hwspinlock/sirf_hwspinlock.c b/drivers/hwspinlock/sirf_hwspinlock.c new file mode 100644 index 0000000..1601854 --- /dev/null +++ b/drivers/hwspinlock/sirf_hwspinlock.c @@ -0,0 +1,136 @@ +/* + * SIRF hardware spinlock driver + * + * Copyright (c) 2015 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hwspinlock_internal.h" + +struct sirf_hwspinlock { + void __iomem *io_base; + struct hwspinlock_device bank; +}; + +/* Number of Hardware Spinlocks*/ +#define HW_SPINLOCK_NUMBER 30 + +/* Hardware spinlock register offsets */ +#define HW_SPINLOCK_BASE 0x404 +#define HW_SPINLOCK_OFFSET(x) (HW_SPINLOCK_BASE + 0x4 * (x)) + +static int sirf_hwspinlock_trylock(struct hwspinlock *lock) +{ + void __iomem *lock_addr = lock->priv; + + /* attempt to acquire the lock by reading value == 1 from it */ + return !!readl(lock_addr); +} + +static void sirf_hwspinlock_unlock(struct hwspinlock *lock) +{ + void __iomem *lock_addr = lock->priv; + + /* release the lock by writing 0 to it */ + writel(0, lock_addr); +} + +static const struct hwspinlock_ops sirf_hwspinlock_ops = { + .trylock = sirf_hwspinlock_trylock, + .unlock = sirf_hwspinlock_unlock, +}; + +static int sirf_hwspinlock_probe(struct platform_device *pdev) +{ + struct sirf_hwspinlock *hwspin; + struct hwspinlock *hwlock; + int idx, ret; + + if (!pdev->dev.of_node) + return -ENODEV; + + hwspin = devm_kzalloc(&pdev->dev, sizeof(*hwspin) + + sizeof(*hwlock) * HW_SPINLOCK_NUMBER, GFP_KERNEL); + if (!hwspin) + return -ENOMEM; + + /* retrieve io base */ + hwspin->io_base = of_iomap(pdev->dev.of_node, 0); + if (!hwspin->io_base) + return -ENOMEM; + + for (idx = 0; idx < HW_SPINLOCK_NUMBER; idx++) { + hwlock = &hwspin->bank.lock[idx]; + hwlock->priv = hwspin->io_base + HW_SPINLOCK_OFFSET(idx); + } + + platform_set_drvdata(pdev, hwspin); + + pm_runtime_enable(&pdev->dev); + + ret = hwspin_lock_register(&hwspin->bank, &pdev->dev, + &sirf_hwspinlock_ops, 0, + HW_SPINLOCK_NUMBER); + if (ret) + goto reg_failed; + + return 0; + +reg_failed: + pm_runtime_disable(&pdev->dev); + iounmap(hwspin->io_base); + + return ret; +} + +static int sirf_hwspinlock_remove(struct platform_device *pdev) +{ + struct sirf_hwspinlock *hwspin = platform_get_drvdata(pdev); + int ret; + + ret = hwspin_lock_unregister(&hwspin->bank); + if (ret) { + dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret); + return ret; + } + + pm_runtime_disable(&pdev->dev); + + iounmap(hwspin->io_base); + + return 0; +} + +static const struct of_device_id sirf_hwpinlock_ids[] = { + { .compatible = "sirf,hwspinlock", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sirf_hwpinlock_ids); + +static struct platform_driver sirf_hwspinlock_driver = { + .probe = sirf_hwspinlock_probe, + .remove = sirf_hwspinlock_remove, + .driver = { + .name = "atlas7_hwspinlock", + .of_match_table = of_match_ptr(sirf_hwpinlock_ids), + }, +}; + +module_platform_driver(sirf_hwspinlock_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SIRF Hardware spinlock driver"); +MODULE_AUTHOR("Wei Chen "); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 987c124..3aba34a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1003,6 +1003,8 @@ EXPORT_SYMBOL_GPL(i2c_new_device); */ void i2c_unregister_device(struct i2c_client *client) { + if (client->dev.of_node) + of_node_clear_flag(client->dev.of_node, OF_POPULATED); device_unregister(&client->dev); } EXPORT_SYMBOL_GPL(i2c_unregister_device); @@ -1311,8 +1313,11 @@ static void of_i2c_register_devices(struct i2c_adapter *adap) dev_dbg(&adap->dev, "of_i2c: walking child nodes\n"); - for_each_available_child_of_node(adap->dev.of_node, node) + for_each_available_child_of_node(adap->dev.of_node, node) { + if (of_node_test_and_set_flag(node, OF_POPULATED)) + continue; of_i2c_register_device(adap, node); + } } static int of_dev_node_match(struct device *dev, void *data) @@ -1844,6 +1849,11 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action, if (adap == NULL) return NOTIFY_OK; /* not for us */ + if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) { + put_device(&adap->dev); + return NOTIFY_OK; + } + client = of_i2c_register_device(adap, rd->dn); put_device(&adap->dev); @@ -1854,6 +1864,10 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action, } break; case OF_RECONFIG_CHANGE_REMOVE: + /* already depopulated? */ + if (!of_node_check_flag(rd->dn, OF_POPULATED)) + return NOTIFY_OK; + /* find our device by node */ client = of_find_i2c_device_by_node(rd->dn); if (client == NULL) diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 7d1cfc1..0730431 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -24,8 +24,12 @@ #include #include #include +#include #include #include +#include +#include +#include #include #include @@ -157,6 +161,82 @@ static const struct of_device_id tps65217_of_match[] = { { /* sentinel */ }, }; +static irqreturn_t tps65217_irq(int irq, void *irq_data) +{ + struct tps65217 *tps = irq_data; + unsigned int int_reg = 0, status_reg = 0; + + tps65217_reg_read(tps, TPS65217_REG_INT, &int_reg); + tps65217_reg_read(tps, TPS65217_REG_STATUS, &status_reg); + if (status_reg) + dev_dbg(tps->dev, "status now: 0x%X\n", status_reg); + + if (!int_reg) + return IRQ_NONE; + + if (int_reg & TPS65217_INT_PBI) { + /* Handle push button */ + dev_dbg(tps->dev, "power button status change\n"); + input_report_key(tps->pwr_but, KEY_POWER, + status_reg & TPS65217_STATUS_PB); + input_sync(tps->pwr_but); + } + if (int_reg & TPS65217_INT_ACI) { + /* Handle AC power status change */ + dev_dbg(tps->dev, "AC power status change\n"); + /* Press KEY_POWER when AC not present */ + input_report_key(tps->pwr_but, KEY_POWER, + ~status_reg & TPS65217_STATUS_ACPWR); + input_sync(tps->pwr_but); + } + if (int_reg & TPS65217_INT_USBI) { + /* Handle USB power status change */ + dev_dbg(tps->dev, "USB power status change\n"); + } + + return IRQ_HANDLED; +} + +static int tps65217_probe_pwr_but(struct tps65217 *tps) +{ + int ret; + unsigned int int_reg; + + tps->pwr_but = devm_input_allocate_device(tps->dev); + if (!tps->pwr_but) { + dev_err(tps->dev, + "Failed to allocated pwr_but input device\n"); + return -ENOMEM; + } + + tps->pwr_but->evbit[0] = BIT_MASK(EV_KEY); + tps->pwr_but->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); + tps->pwr_but->name = "tps65217_pwr_but"; + ret = input_register_device(tps->pwr_but); + if (ret) { + /* NOTE: devm managed device */ + dev_err(tps->dev, "Failed to register button device\n"); + return ret; + } + ret = devm_request_threaded_irq(tps->dev, + tps->irq, NULL, tps65217_irq, IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "tps65217", tps); + if (ret != 0) { + dev_err(tps->dev, "Failed to request IRQ %d\n", tps->irq); + return ret; + } + + /* enable the power button interrupt */ + ret = tps65217_reg_read(tps, TPS65217_REG_INT, &int_reg); + if (ret < 0) { + dev_err(tps->dev, "Failed to read INT reg\n"); + return ret; + } + int_reg &= ~TPS65217_INT_PBM; + tps65217_reg_write(tps, TPS65217_REG_INT, int_reg, TPS65217_PROTECT_NONE); + return 0; +} + static int tps65217_probe(struct i2c_client *client, const struct i2c_device_id *ids) { @@ -164,10 +244,13 @@ static int tps65217_probe(struct i2c_client *client, unsigned int version; unsigned long chip_id = ids->driver_data; const struct of_device_id *match; + struct device_node *node; bool status_off = false; + int irq = -1, irq_gpio = -1; int ret; - if (client->dev.of_node) { + node = client->dev.of_node; + if (node) { match = of_match_device(tps65217_of_match, &client->dev); if (!match) { dev_err(&client->dev, @@ -175,8 +258,31 @@ static int tps65217_probe(struct i2c_client *client, return -EINVAL; } chip_id = (unsigned long)match->data; - status_off = of_property_read_bool(client->dev.of_node, + status_off = of_property_read_bool(node, "ti,pmic-shutdown-controller"); + + /* at first try to get irq via OF method */ + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) { + irq = -1; + irq_gpio = of_get_named_gpio(node, "irq-gpio", 0); + if (irq_gpio >= 0) { + /* valid gpio; convert to irq */ + ret = devm_gpio_request_one(&client->dev, + irq_gpio, GPIOF_DIR_IN, + "tps65217-gpio-irq"); + if (ret != 0) + dev_warn(&client->dev, "Failed to " + "request gpio #%d\n", irq_gpio); + irq = gpio_to_irq(irq_gpio); + if (irq <= 0) { + dev_warn(&client->dev, "Failed to " + "convert gpio #%d to irq\n", + irq_gpio); + irq = -1; + } + } + } } if (!chip_id) { @@ -200,6 +306,18 @@ static int tps65217_probe(struct i2c_client *client, return ret; } + tps->irq = irq; + tps->irq_gpio = irq_gpio; + + /* we got an irq, request it */ + if (tps->irq >= 0) { + ret = tps65217_probe_pwr_but(tps); + if (ret < 0) { + dev_err(tps->dev, "Failed to probe pwr_but\n"); + return ret; + } + } + ret = mfd_add_devices(tps->dev, -1, tps65217s, ARRAY_SIZE(tps65217s), NULL, 0, NULL); if (ret < 0) { diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 006242c..76705c4 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -515,6 +515,36 @@ config VEXPRESS_SYSCFG bus. System Configuration interface is one of the possible means of generating transactions on this bus. +config BONE_CAPEMGR + tristate "Beaglebone cape manager" + depends on ARCH_OMAP2PLUS && OF + select EEPROM + select OF_OVERLAY + default n + help + Say Y here to include support for automatic loading of + beaglebone capes. + +config DEV_OVERLAYMGR + tristate "Device overlay manager" + depends on OF + select OF_OVERLAY + default n + help + Say Y here to include support for the automagical dev + overlay manager. + +config TIEQEP + tristate "EQEP Hardware quadrature encoder controller" + depends on SOC_AM33XX + select PWM_TIPWMSS + help + Driver support for the EQEP quadrature encoder controller AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called tieqep. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" @@ -525,7 +555,9 @@ source "drivers/misc/altera-stapl/Kconfig" source "drivers/misc/mei/Kconfig" source "drivers/misc/vmw_vmci/Kconfig" source "drivers/misc/mic/Kconfig" +source "drivers/misc/cape_bone_argus/Kconfig" source "drivers/misc/genwqe/Kconfig" +source "drivers/misc/cape/Kconfig" source "drivers/misc/echo/Kconfig" source "drivers/misc/cxl/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7d5c4cd..b334785 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -52,7 +52,12 @@ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o obj-$(CONFIG_SRAM) += sram.o obj-y += mic/ +obj-y += cape_bone_argus/ obj-$(CONFIG_GENWQE) += genwqe/ +obj-y += cape/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ +obj-$(CONFIG_TIEQEP) += tieqep.o +obj-$(CONFIG_BONE_CAPEMGR) += bone_capemgr.o +obj-$(CONFIG_DEV_OVERLAYMGR) += devovmgr.o diff --git a/drivers/misc/bone_capemgr.c b/drivers/misc/bone_capemgr.c new file mode 100644 index 0000000..7c4f5b0 --- /dev/null +++ b/drivers/misc/bone_capemgr.c @@ -0,0 +1,1884 @@ +/* + * TI Beaglebone cape manager + * + * Copyright (C) 2012 Texas Instruments Inc. + * Copyright (C) 2012-2015 Konsulko Group. + * Author: Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* disabled capes */ +static char *disable_partno; +module_param(disable_partno, charp, 0444); +MODULE_PARM_DESC(disable_partno, + "Comma delimited list of PART-NUMBER[:REV] of disabled capes"); + +/* enable capes */ +static char *enable_partno; +module_param(enable_partno, charp, 0444); +MODULE_PARM_DESC(enable_partno, + "Comma delimited list of PART-NUMBER[:REV] of enabled capes"); + +/* delay to scan on boot until rootfs appears */ +static int boot_scan_period = 1000; +module_param(boot_scan_period, int, 0444); +MODULE_PARM_DESC(boot_scan_period, + "boot scan period until rootfs firmware is available"); + +struct capemgr_info; + +struct slot_ee_attribute { + struct device_attribute devattr; + unsigned int field; + struct bone_cape_slot *slot; /* this is filled when instantiated */ +}; +#define to_slot_ee_attribute(x) \ + container_of((x), struct slot_ee_attribute, devattr) + +struct bbrd_ee_attribute { + struct device_attribute devattr; + unsigned int field; +}; +#define to_bbrd_ee_attribute(x) \ + container_of((x), struct bbrd_ee_attribute, devattr) + +struct bone_cape_slot { + struct list_head node; + struct capemgr_info *info; + int slotno; + struct nvmem_cell *nvmem_cell; + + char text_id[256]; + char signature[256]; + /* quick access */ + char board_name[32+1]; + char version[4+1]; + char manufacturer[16+1]; + char part_number[16+1]; + + /* attribute group */ + char *ee_attr_name; + int ee_attrs_count; + struct slot_ee_attribute *ee_attrs; + struct attribute **ee_attrs_tab; + struct attribute_group attrgroup; + + /* state flags */ + unsigned int probed : 1; + unsigned int probe_failed : 1; + unsigned int override : 1; + unsigned int loading : 1; + unsigned int loaded : 1; + unsigned int retry_loading : 1; + unsigned int disabled : 1; + + char *dtbo; + const struct firmware *fw; + struct device_node *overlay; + int overlay_id; + + /* loader thread */ + struct task_struct *loader_thread; + + /* load priority */ + int priority; +}; + +struct bone_baseboard { + + /* from the matched boardmap node */ + char *compatible_name; + + /* filled in by reading the eeprom */ + char signature[256]; + char text_id[64+1]; + + /* quick access */ + char board_name[8+1]; + char revision[4+1]; + char serial_number[12+1]; + + /* access to the eeprom */ + struct nvmem_cell *nvmem_cell; +}; + +struct capemgr_info { + struct platform_device *pdev; + + atomic_t next_slot_nr; + struct list_head slot_list; + struct mutex slots_list_mutex; + + /* baseboard EEPROM data */ + struct bone_baseboard baseboard; + + /* wait queue for keeping the priorities straight */ + wait_queue_head_t load_wq; +}; + +static int bone_slot_fill_override(struct bone_cape_slot *slot, + const char *part_number, const char *version); +static struct bone_cape_slot *capemgr_add_slot( + struct capemgr_info *info, const char *slot_name, + const char *part_number, const char *version, int prio); +static int capemgr_remove_slot_no_lock(struct bone_cape_slot *slot); +static int capemgr_remove_slot(struct bone_cape_slot *slot); +static int capemgr_load_slot(struct bone_cape_slot *slot); +static int capemgr_unload_slot(struct bone_cape_slot *slot); + +/* baseboard EEPROM field definition */ +#define BBRD_EE_FIELD_HEADER 0 +#define BBRD_EE_FIELD_BOARD_NAME 1 +#define BBRD_EE_FIELD_REVISION 2 +#define BBRD_EE_FIELD_SERIAL_NUMBER 3 +#define BBRD_EE_FIELD_CONFIG_OPTION 4 +#define BBRD_EE_FILED_RSVD1 5 +#define BBRD_EE_FILED_RSVD2 6 +#define BBRD_EE_FILED_RSVD3 7 + +/* cape EEPROM field definitions */ +#define CAPE_EE_FIELD_HEADER 0 +#define CAPE_EE_FIELD_EEPROM_REV 1 +#define CAPE_EE_FIELD_BOARD_NAME 2 +#define CAPE_EE_FIELD_VERSION 3 +#define CAPE_EE_FIELD_MANUFACTURER 4 +#define CAPE_EE_FIELD_PART_NUMBER 5 +#define CAPE_EE_FIELD_NUMBER_OF_PINS 6 +#define CAPE_EE_FIELD_SERIAL_NUMBER 7 +#define CAPE_EE_FIELD_PIN_USAGE 8 +#define CAPE_EE_FIELD_VDD_3V3EXP 9 +#define CAPE_EE_FIELD_VDD_5V 10 +#define CAPE_EE_FIELD_SYS_5V 11 +#define CAPE_EE_FIELD_DC_SUPPLIED 12 +#define CAPE_EE_FIELD_FIELDS_NR 13 + +#define EE_FIELD_MAKE_HEADER(p) \ + ({ \ + const u8 *_p = (p); \ + (((u32)_p[0] << 24) | ((u32)_p[1] << 16) | \ + ((u32)_p[2] << 8) | (u32)_p[3]); \ + }) + +#define EE_FIELD_HEADER_VALID 0xaa5533ee + +struct ee_field { + const char *name; + int start; + int size; + unsigned int ascii : 1; + unsigned int strip_trailing_dots : 1; + const char *override; +}; + +/* baseboard EEPROM definitions */ +static const struct ee_field bbrd_sig_fields[] = { + [BBRD_EE_FIELD_HEADER] = { + .name = "header", + .start = 0, + .size = 4, + .ascii = 0, + .override = "\xaa\x55\x33\xee", /* AA 55 33 EE */ + }, + [BBRD_EE_FIELD_BOARD_NAME] = { + .name = "board-name", + .start = 4, + .size = 8, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Board Name", + }, + [BBRD_EE_FIELD_REVISION] = { + .name = "revision", + .start = 12, + .size = 4, + .ascii = 1, + .override = "00A0", + }, + [BBRD_EE_FIELD_SERIAL_NUMBER] = { + .name = "serial-number", + .start = 16, + .size = 12, + .ascii = 1, + .override = "0000000000", + }, + [BBRD_EE_FIELD_CONFIG_OPTION] = { + .name = "config-option", + .start = 28, + .size = 32, + }, +}; + +/* cape EEPROM definitions */ +static const struct ee_field cape_sig_fields[] = { + [CAPE_EE_FIELD_HEADER] = { + .name = "header", + .start = 0, + .size = 4, + .ascii = 0, + .override = "\xaa\x55\x33\xee", /* AA 55 33 EE */ + }, + [CAPE_EE_FIELD_EEPROM_REV] = { + .name = "eeprom-format-revision", + .start = 4, + .size = 2, + .ascii = 1, + .override = "A0", + }, + [CAPE_EE_FIELD_BOARD_NAME] = { + .name = "board-name", + .start = 6, + .size = 32, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Board Name", + }, + [CAPE_EE_FIELD_VERSION] = { + .name = "version", + .start = 38, + .size = 4, + .ascii = 1, + .override = "00A0", + }, + [CAPE_EE_FIELD_MANUFACTURER] = { + .name = "manufacturer", + .start = 42, + .size = 16, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Manuf", + }, + [CAPE_EE_FIELD_PART_NUMBER] = { + .name = "part-number", + .start = 58, + .size = 16, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Part#", + }, + [CAPE_EE_FIELD_NUMBER_OF_PINS] = { + .name = "number-of-pins", + .start = 74, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_SERIAL_NUMBER] = { + .name = "serial-number", + .start = 76, + .size = 12, + .ascii = 1, + .override = "0000000000", + }, + [CAPE_EE_FIELD_PIN_USAGE] = { + .name = "pin-usage", + .start = 88, + .size = 140, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_VDD_3V3EXP] = { + .name = "vdd-3v3exp", + .start = 228, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_VDD_5V] = { + .name = "vdd-5v", + .start = 230, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_SYS_5V] = { + .name = "sys-5v", + .start = 232, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_DC_SUPPLIED] = { + .name = "dc-supplied", + .start = 234, + .size = 2, + .ascii = 0, + .override = NULL, + }, +}; + +static char *ee_field_get(const struct ee_field *sig_field, + const void *data, int field, char *buf, int bufsz) +{ + int len; + + /* enough space? */ + if (bufsz < sig_field->size + sig_field->ascii) + return NULL; + + memcpy(buf, (char *)data + sig_field->start, sig_field->size); + + /* terminate ascii field */ + if (sig_field->ascii) + buf[sig_field->size] = '\0'; + + if (sig_field->strip_trailing_dots) { + len = strlen(buf); + while (len > 1 && buf[len - 1] == '.') + buf[--len] = '\0'; + } + + return buf; +} + +char *bbrd_ee_field_get(const void *data, + int field, char *buf, int bufsz) +{ + if ((unsigned int)field >= ARRAY_SIZE(bbrd_sig_fields)) + return NULL; + + return ee_field_get(&bbrd_sig_fields[field], data, field, buf, bufsz); +} + +char *cape_ee_field_get(const void *data, + int field, char *buf, int bufsz) +{ + if ((unsigned int)field >= ARRAY_SIZE(cape_sig_fields)) + return NULL; + + return ee_field_get(&cape_sig_fields[field], data, field, buf, bufsz); +} + +#ifdef CONFIG_OF +static const struct of_device_id capemgr_of_match[] = { + { + .compatible = "ti,bone-capemgr", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, capemgr_of_match); + +#endif + +static int bone_baseboard_scan(struct bone_baseboard *bbrd) +{ + struct capemgr_info *info = container_of(bbrd, + struct capemgr_info, baseboard); + const u8 *p; + int ret; + size_t len; + + p = nvmem_cell_read(bbrd->nvmem_cell, &len); + if (IS_ERR(p)) { + ret = PTR_ERR(p); + dev_err(&info->pdev->dev, + "Cannot read cell (ret=%d)\n", ret); + return ret; + } + if (len < sizeof(bbrd->signature)) { + dev_info(&info->pdev->dev, + "Short read %d (should be >= %d bytes)\n", + len, sizeof(bbrd->signature)); + return -EINVAL; + } + memcpy(bbrd->signature, p, sizeof(bbrd->signature)); + + p = bbrd->signature; + if (EE_FIELD_MAKE_HEADER(p) != EE_FIELD_HEADER_VALID) { + dev_err(&info->pdev->dev, "Invalid board signature '%08x'\n", + EE_FIELD_MAKE_HEADER(p)); + return -ENODEV; + } + + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_BOARD_NAME, + bbrd->board_name, sizeof(bbrd->board_name)); + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_REVISION, + bbrd->revision, sizeof(bbrd->revision)); + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_SERIAL_NUMBER, + bbrd->serial_number, sizeof(bbrd->serial_number)); + + /* board_name,version,manufacturer,part_number */ + snprintf(bbrd->text_id, sizeof(bbrd->text_id) - 1, + "%s,%s,%s", bbrd->board_name, bbrd->revision, + bbrd->serial_number); + + /* terminate always */ + bbrd->text_id[sizeof(bbrd->text_id) - 1] = '\0'; + + return 0; +} + +static int bone_slot_scan(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + const u8 *p; + int r; + ssize_t len; + + /* need to read EEPROM? */ + if (slot->probed) + goto slot_fail_check; + + slot->probed = 1; + + if (!slot->override) { + + p = nvmem_cell_read(slot->nvmem_cell, &len); + if (IS_ERR(p)) { + r = PTR_ERR(p); + slot->probe_failed = 1; + + /* timeout is normal when no cape is present */ + if (r != -ETIMEDOUT) + dev_err(&info->pdev->dev, + "Cannot read cell (ret=%d)\n", r); + return r; + } + if (len < sizeof(slot->signature)) { + dev_info(&info->pdev->dev, + "Short read %d (should be >= %d bytes)\n", + len, sizeof(slot->signature)); + return -EINVAL; + } + memcpy(slot->signature, p, sizeof(slot->signature)); + + } else + dev_info(&info->pdev->dev, + "Using override eeprom data at slot %d\n", + slot->slotno); + + p = slot->signature; + if (EE_FIELD_MAKE_HEADER(p) != EE_FIELD_HEADER_VALID) { + dev_err(&info->pdev->dev, + "Invalid signature '%08x' at slot %d\n", + EE_FIELD_MAKE_HEADER(p), slot->slotno); + slot->probe_failed = 1; + return -ENODEV; + } + + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_BOARD_NAME, + slot->board_name, sizeof(slot->board_name)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_VERSION, + slot->version, sizeof(slot->version)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_MANUFACTURER, + slot->manufacturer, sizeof(slot->manufacturer)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_PART_NUMBER, + slot->part_number, sizeof(slot->part_number)); + + /* board_name,version,manufacturer,part_number */ + snprintf(slot->text_id, sizeof(slot->text_id) - 1, + "%s,%s,%s,%s", slot->board_name, slot->version, + slot->manufacturer, slot->part_number); + + /* terminate always */ + slot->text_id[sizeof(slot->text_id) - 1] = '\0'; + +slot_fail_check: + /* slot has failed and we don't support hotpluging */ + if (slot->probe_failed) + return -ENODEV; + + return 0; +} + +/* return 0 if not matched,, 1 if matched */ +static int bone_match_cape(const char *match, + const char *part_number, const char *version) +{ + char *tmp_part_number, *tmp_version; + char *buf, *s, *e, *sn; + int found; + + if (match == NULL || part_number == NULL) + return 0; + + /* copy the argument to work on it */ + buf = kstrdup(match, GFP_KERNEL); + + /* no memory, too bad... */ + if (buf == NULL) + return 0; + + found = 0; + s = buf; + e = s + strlen(s); + while (s < e) { + /* find comma separator */ + sn = strchr(s, ','); + if (sn != NULL) + *sn++ = '\0'; + else + sn = e; + tmp_part_number = s; + tmp_version = strchr(tmp_part_number, ':'); + if (tmp_version != NULL) + *tmp_version++ = '\0'; + s = sn; + + /* the part names must match */ + if (strcmp(tmp_part_number, part_number) != 0) + continue; + + /* if there's no version, match any */ + if (version == NULL || tmp_version == NULL || + strcmp(version, tmp_version) == 0) { + found = 1; + break; + } + } + + kfree(buf); + + return found; +} + +/* helper method */ +static int of_multi_prop_cmp(const struct property *prop, const char *value) +{ + const char *cp; + int cplen, vlen, l; + + /* check if it's directly compatible */ + cp = prop->value; + cplen = prop->length; + vlen = strlen(value); + + while (cplen > 0) { + /* compatible? */ + if (of_compat_cmp(cp, value, vlen) == 0) + return 0; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + return -1; +} + +static ssize_t slot_ee_attr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct slot_ee_attribute *ee_attr = to_slot_ee_attribute(attr); + struct bone_cape_slot *slot = ee_attr->slot; + const struct ee_field *sig_field; + int i, len; + char *p, *s; + u16 val; + + /* add newline for ascii fields */ + sig_field = &cape_sig_fields[ee_attr->field]; + + len = sig_field->size + sig_field->ascii; + p = kmalloc(len, GFP_KERNEL); + if (p == NULL) + return -ENOMEM; + + s = cape_ee_field_get(slot->signature, ee_attr->field, p, len); + if (s == NULL) + return -EINVAL; + + /* add newline for ascii fields and return */ + if (sig_field->ascii) { + len = sprintf(buf, "%s\n", s); + goto out; + } + + /* case by case handling */ + switch (ee_attr->field) { + case CAPE_EE_FIELD_HEADER: + len = sprintf(buf, "%02x %02x %02x %02x\n", + s[0], s[1], s[2], s[3]); + break; + + /* 2 bytes */ + case CAPE_EE_FIELD_NUMBER_OF_PINS: + case CAPE_EE_FIELD_VDD_3V3EXP: + case CAPE_EE_FIELD_VDD_5V: + case CAPE_EE_FIELD_SYS_5V: + case CAPE_EE_FIELD_DC_SUPPLIED: + /* the bone is LE */ + val = s[0] & (s[1] << 8); + len = sprintf(buf, "%u\n", (unsigned int)val & 0xffff); + break; + + case CAPE_EE_FIELD_PIN_USAGE: + + len = 0; + for (i = 0; i < sig_field->size / 2; i++) { + /* the bone is LE */ + val = s[0] & (s[1] << 8); + sprintf(buf, "%04x\n", val); + buf += 5; + len += 5; + s += 2; + } + + break; + + default: + *buf = '\0'; + len = 0; + break; + } + +out: + kfree(p); + + return len; +} + +#define SLOT_EE_ATTR(_name, _field) \ + { \ + .devattr = __ATTR(_name, S_IRUGO, slot_ee_attr_show, NULL), \ + .field = CAPE_EE_FIELD_##_field, \ + .slot = NULL, \ + } + +static const struct slot_ee_attribute slot_ee_attrs[] = { + SLOT_EE_ATTR(header, HEADER), + SLOT_EE_ATTR(eeprom-format-revision, EEPROM_REV), + SLOT_EE_ATTR(board-name, BOARD_NAME), + SLOT_EE_ATTR(version, VERSION), + SLOT_EE_ATTR(manufacturer, MANUFACTURER), + SLOT_EE_ATTR(part-number, PART_NUMBER), + SLOT_EE_ATTR(number-of-pins, NUMBER_OF_PINS), + SLOT_EE_ATTR(serial-number, SERIAL_NUMBER), + SLOT_EE_ATTR(pin-usage, PIN_USAGE), + SLOT_EE_ATTR(vdd-3v3exp, VDD_3V3EXP), + SLOT_EE_ATTR(vdd-5v, VDD_5V), + SLOT_EE_ATTR(sys-5v, SYS_5V), + SLOT_EE_ATTR(dc-supplied, DC_SUPPLIED), +}; + +static int bone_cape_slot_sysfs_register(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct slot_ee_attribute *ee_attr; + struct attribute_group *attrgroup; + int i, err, sz; + + slot->ee_attr_name = kasprintf(GFP_KERNEL, "slot-%d", slot->slotno); + if (slot->ee_attr_name == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attr_name\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attr_name; + } + + slot->ee_attrs_count = ARRAY_SIZE(slot_ee_attrs); + + sz = slot->ee_attrs_count * sizeof(*slot->ee_attrs); + slot->ee_attrs = kmalloc(sz, GFP_KERNEL); + if (slot->ee_attrs == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs; + } + + attrgroup = &slot->attrgroup; + memset(attrgroup, 0, sizeof(*attrgroup)); + attrgroup->name = slot->ee_attr_name; + + sz = sizeof(*slot->ee_attrs_tab) * (slot->ee_attrs_count + 1); + attrgroup->attrs = kmalloc(sz, GFP_KERNEL); + if (attrgroup->attrs == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs_tab\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs_tab; + } + /* copy everything over */ + memcpy(slot->ee_attrs, slot_ee_attrs, sizeof(slot_ee_attrs)); + + /* bind this attr to the slot */ + for (i = 0; i < slot->ee_attrs_count; i++) { + ee_attr = &slot->ee_attrs[i]; + ee_attr->slot = slot; + attrgroup->attrs[i] = &ee_attr->devattr.attr; + } + attrgroup->attrs[i] = NULL; + + /* make lockdep happy */ + for (i = 0; i < slot->ee_attrs_count; i++) { + ee_attr = &slot->ee_attrs[i]; + sysfs_attr_init(&ee_attr->devattr.attr); + } + + err = sysfs_create_group(&dev->kobj, attrgroup); + if (err != 0) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs_tab\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs_group; + } + + return 0; + +err_fail_no_ee_attrs_group: + kfree(slot->ee_attrs_tab); +err_fail_no_ee_attrs_tab: + kfree(slot->ee_attrs); +err_fail_no_ee_attrs: + kfree(slot->ee_attr_name); +err_fail_no_ee_attr_name: + return err; +} + +static void bone_cape_slot_sysfs_unregister(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + + sysfs_remove_group(&dev->kobj, &slot->attrgroup); + kfree(slot->ee_attrs_tab); + kfree(slot->ee_attrs); + kfree(slot->ee_attr_name); +} + +static ssize_t bbrd_ee_attr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bbrd_ee_attribute *ee_attr = to_bbrd_ee_attribute(attr); + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_baseboard *bbrd = &info->baseboard; + const struct ee_field *sig_field; + u16 val; + int i, len; + char *p, *s; + + /* add newline for ascii fields */ + sig_field = &bbrd_sig_fields[ee_attr->field]; + + len = sig_field->size + sig_field->ascii; + p = kmalloc(len, GFP_KERNEL); + if (p == NULL) + return -ENOMEM; + + s = bbrd_ee_field_get(bbrd->signature, ee_attr->field, p, len); + if (s == NULL) + return -EINVAL; + + /* add newline for ascii fields and return */ + if (sig_field->ascii) { + len = sprintf(buf, "%s\n", s); + goto out; + } + + /* case by case handling */ + switch (ee_attr->field) { + case BBRD_EE_FIELD_HEADER: + len = sprintf(buf, "%02x %02x %02x %02x\n", + s[0], s[1], s[2], s[3]); + break; + + case BBRD_EE_FIELD_CONFIG_OPTION: + len = 0; + for (i = 0; i < sig_field->size / 2; i++) { + /* the bone is LE */ + val = s[0] & (s[1] << 8); + sprintf(buf, "%04x\n", val); + buf += 5; + len += 5; + s += 2; + } + break; + + default: + *buf = '\0'; + len = 0; + break; + } + +out: + kfree(p); + + return len; +} + +#define BBRD_EE_ATTR(_name, _field) \ + { \ + .devattr = __ATTR(_name, 0440, bbrd_ee_attr_show, NULL), \ + .field = BBRD_EE_FIELD_##_field, \ + } + +static struct bbrd_ee_attribute bbrd_ee_attrs[] = { + BBRD_EE_ATTR(header, HEADER), + BBRD_EE_ATTR(board-name, BOARD_NAME), + BBRD_EE_ATTR(revision, REVISION), + BBRD_EE_ATTR(serial-number, SERIAL_NUMBER), + BBRD_EE_ATTR(config-option, CONFIG_OPTION), +}; + +static struct attribute *bbrd_attrs_flat[] = { + &bbrd_ee_attrs[BBRD_EE_FIELD_HEADER].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_BOARD_NAME].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_REVISION].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_SERIAL_NUMBER].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_CONFIG_OPTION].devattr.attr, + NULL, +}; + +static const struct attribute_group bbrd_attr_group = { + .name = "baseboard", + .attrs = bbrd_attrs_flat, +}; + +static ssize_t slots_show(struct device *dev, struct device_attribute *attr, + char *buf); +static ssize_t slots_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); + +static DEVICE_ATTR(slots, 0644, slots_show, slots_store); + +static struct attribute *root_attrs_flat[] = { + &dev_attr_slots.attr, + NULL, +}; + +static const struct attribute_group root_attr_group = { + .attrs = root_attrs_flat, +}; + +static const struct attribute_group *attr_groups[] = { + &root_attr_group, + &bbrd_attr_group, + NULL, +}; + +static ssize_t slots_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_cape_slot *slot; + ssize_t len, sz; + + mutex_lock(&info->slots_list_mutex); + sz = 0; + list_for_each_entry(slot, &info->slot_list, node) { + + len = sprintf(buf, "%2d: %c%c%c%c%c%c %3d %s\n", + slot->slotno, + slot->probed ? 'P' : '-', + slot->probe_failed ? 'F' : '-', + slot->override ? 'O' : '-', + slot->loading ? 'l' : '-', + slot->loaded ? 'L' : '-', + slot->disabled ? 'D' : '-', + slot->overlay_id, slot->text_id); + + buf += len; + sz += len; + } + mutex_unlock(&info->slots_list_mutex); + + return sz; +} + +static ssize_t slots_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_cape_slot *slot; + struct device_node *pnode, *node; + char *s, *part_number, *version; + int ret; + int slotno; + + /* check for remove slot */ + if (strlen(buf) > 0 && buf[0] == '-') { + ret = kstrtoint(buf + 1, 10, &slotno); + if (ret != 0) + return ret; + + /* now load each (take lock to be sure */ + mutex_lock(&info->slots_list_mutex); + list_for_each_entry(slot, &info->slot_list, node) { + if (slotno == slot->slotno) + goto found; + } + + mutex_unlock(&info->slots_list_mutex); + return -ENODEV; +found: + /* the hardware slots just get unloaded */ + if (!slot->override) { + ret = capemgr_unload_slot(slot); + if (ret == 0) + dev_info(&pdev->dev, + "Unloaded slot #%d\n", slotno); + else + dev_err(&pdev->dev, + "Failed to unload slot #%d\n", slotno); + } else { + ret = capemgr_remove_slot_no_lock(slot); + if (ret == 0) + dev_info(&pdev->dev, + "Removed slot #%d\n", slotno); + else + dev_err(&pdev->dev, + "Failed to remove slot #%d\n", slotno); + } + mutex_unlock(&info->slots_list_mutex); + + return ret == 0 ? strlen(buf) : ret; + } + + part_number = kstrdup(buf, GFP_KERNEL); + if (part_number == NULL) + return -ENOMEM; + + /* remove trailing spaces dots and newlines */ + s = part_number + strlen(part_number); + while (s > part_number && + (isspace(s[-1]) || s[-1] == '\n' || s[-1] == '.')) + *--s = '\0'; + + version = strchr(part_number, ':'); + if (version != NULL) + *version++ = '\0'; + + dev_info(&pdev->dev, "part_number '%s', version '%s'\n", + part_number, version ? version : "N/A"); + + pnode = pdev->dev.of_node; + node = NULL; + slot = NULL; + ret = 0; + + /* no specific slot found, try immediate */ + slot = capemgr_add_slot(info, NULL, part_number, version, 0); + + if (IS_ERR_OR_NULL(slot)) { + dev_err(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr) - 1); + ret = slot ? PTR_ERR(slot) : -ENODEV; + slot = NULL; + goto err_fail; + } + + kfree(part_number); + + ret = capemgr_load_slot(slot); + if (ret != 0) + capemgr_remove_slot(slot); + + return ret == 0 ? strlen(buf) : ret; +err_fail: + of_node_put(node); + kfree(part_number); + return ret; +} + +/* verify the overlay */ +static int capemgr_verify_overlay(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct bone_baseboard *bbrd = &info->baseboard; + struct device_node *node = slot->overlay; + struct property *prop; + struct bone_cape_slot *slotn; + int err, counta, countb, i, j; + const char *ra, *rb; + + /* validate */ + if (node == NULL) { + dev_err(dev, "slot #%d: No overlay for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* check if the slot is compatible with the board */ + prop = of_find_property(node, "compatible", NULL); + + /* no compatible property? */ + if (prop == NULL) { + dev_err(dev, "slot #%d: No compatible property for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* verify that the cape is baseboard compatible */ + if (of_multi_prop_cmp(prop, bbrd->compatible_name) != 0) { + dev_err(dev, "slot #%d: Incompatible with baseboard for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* count the strings */ + counta = of_property_count_strings(node, "exclusive-use"); + /* no valid property, or no resources; no matter, it's OK */ + if (counta <= 0) + return 0; + + /* and now check if there's a resource conflict */ + err = 0; + mutex_lock(&info->slots_list_mutex); + for (i = 0; i < counta; i++) { + + ra = NULL; + err = of_property_read_string_index(node, "exclusive-use", + i, &ra); + if (err != 0) { + dev_err(dev, "slot #%d: Could not read string #%d\n", + slot->slotno, i); + break; + } + + list_for_each_entry(slotn, &info->slot_list, node) { + + /* don't check against self */ + if (slot == slotn) + continue; + + /* only check against loaded or loading slots */ + if (!slotn->loaded && !slotn->loading) + continue; + + countb = of_property_count_strings(slotn->overlay, + "exclusive-use"); + /* no valid property, or resources; it's OK */ + if (countb <= 0) + continue; + + + for (j = 0; j < countb; j++) { + + /* count the resources */ + rb = NULL; + err = of_property_read_string_index( + slotn->overlay, "exclusive-use", + j, &rb); + if (err != 0) { + /* error, but we don't care */ + err = 0; + break; + } + + /* ignore case; just in case ;) */ + if (strcasecmp(ra, rb) == 0) { + + /* resource conflict */ + err = -EEXIST; + dev_err(dev, + "slot #%d: %s conflict %s (#%d:%s)\n", + slot->slotno, + slot->part_number, ra, + slotn->slotno, + slotn->part_number); + goto out; + } + } + } + } +out: + mutex_unlock(&info->slots_list_mutex); + + return err; +} + +static int capemgr_load_slot(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + const char *dtbo; + int err; + + if (slot->probe_failed) { + dev_err(dev, "slot #%d: probe failed for '%s'\n", + slot->slotno, slot->part_number); + return -ENODEV; + } + + if (slot->loaded) { + dev_err(dev, "slot #%d: already loaded for '%s'\n", + slot->slotno, slot->part_number); + return -EAGAIN; + } + + /* make sure we don't leak this on repeated calls */ + kfree(slot->dtbo); + slot->dtbo = NULL; + + dev_dbg(dev, "slot #%d: Requesting part number/version based '%s-%s.dtbo\n", + slot->slotno, slot->part_number, slot->version); + + /* request the part number + .dtbo*/ + slot->dtbo = kasprintf(GFP_KERNEL, "%s-%s.dtbo", + slot->part_number, slot->version); + if (slot->dtbo == NULL) { + dev_err(dev, "slot #%d: Failed to get dtbo '%s'\n", + slot->slotno, dtbo); + return -ENOMEM; + } + + dev_dbg(dev, "slot #%d: Requesting firmware '%s' for board-name '%s', version '%s'%s\n", + slot->slotno, + slot->dtbo, slot->board_name, slot->version, + system_state == SYSTEM_BOOTING ? " - booting" : ""); + + err = request_firmware_direct(&slot->fw, slot->dtbo, dev); + if (err != 0) { + dev_dbg(dev, "failed to load firmware '%s'\n", slot->dtbo); + goto err_fail_no_fw; + } + + dev_dbg(dev, "slot #%d: dtbo '%s' loaded; converting to live tree\n", + slot->slotno, slot->dtbo); + + of_fdt_unflatten_tree((void *)slot->fw->data, &slot->overlay); + if (slot->overlay == NULL) { + dev_err(dev, "slot #%d: Failed to unflatten\n", + slot->slotno); + err = -EINVAL; + goto err_fail; + } + + /* mark it as detached */ + of_node_set_flag(slot->overlay, OF_DETACHED); + + /* perform resolution */ + err = of_resolve_phandles(slot->overlay); + if (err != 0) { + dev_err(dev, "slot #%d: Failed to resolve tree\n", + slot->slotno); + goto err_fail; + } + + err = capemgr_verify_overlay(slot); + if (err != 0) { + dev_err(dev, "slot #%d: Failed verification\n", + slot->slotno); + goto err_fail; + } + + err = of_overlay_create(slot->overlay); + if (err < 0) { + dev_err(dev, "slot #%d: Failed to create overlay\n", + slot->slotno); + goto err_fail; + } + slot->overlay_id = err; + + slot->loading = 0; + slot->loaded = 1; + + dev_info(dev, "slot #%d: dtbo '%s' loaded; overlay id #%d\n", + slot->slotno, slot->dtbo, slot->overlay_id); + + return 0; + +err_fail: + + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + slot->overlay = NULL; + + release_firmware(slot->fw); + slot->fw = NULL; + +err_fail_no_fw: + slot->loading = 0; + return err; +} + +static int capemgr_unload_slot(struct bone_cape_slot *slot) +{ + if (!slot->loaded || slot->overlay_id == -1) + return -EINVAL; + + of_overlay_destroy(slot->overlay_id); + slot->overlay_id = -1; + + slot->loaded = 0; + + return 0; + +} + +/* slots_list_mutex must be taken */ +static int capemgr_remove_slot_no_lock(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + int ret; + + if (slot == NULL) + return 0; + + if (slot->loaded && slot->overlay_id >= 0) { + /* unload just in case */ + ret = capemgr_unload_slot(slot); + if (ret != 0) { + dev_err(dev, "Unable to unload slot #%d\n", + slot->slotno); + return ret; + } + } + + /* if probed OK, remove the sysfs nodes */ + if (slot->probed && !slot->probe_failed) + bone_cape_slot_sysfs_unregister(slot); + + /* remove it from the list */ + list_del(&slot->node); + + if (slot->nvmem_cell) + nvmem_cell_put(slot->nvmem_cell); + devm_kfree(dev, slot); + return 0; +} + +static int capemgr_remove_slot(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + int ret; + + mutex_lock(&info->slots_list_mutex); + ret = capemgr_remove_slot_no_lock(slot); + mutex_unlock(&info->slots_list_mutex); + + return ret; +} + +static int bone_slot_fill_override(struct bone_cape_slot *slot, + const char *part_number, const char *version) +{ + const struct ee_field *sig_field; + int i, len, has_part_number; + char *p; + + slot->probe_failed = 0; + slot->probed = 0; + + /* zero out signature */ + memset(slot->signature, 0, + sizeof(slot->signature)); + + /* first, fill in all with override defaults */ + for (i = 0; i < ARRAY_SIZE(cape_sig_fields); i++) { + + sig_field = &cape_sig_fields[i]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + if (sig_field->override) + memcpy(p, sig_field->override, + sig_field->size); + else + memset(p, 0, sig_field->size); + } + + /* if a part_number is supplied use it */ + len = part_number ? strlen(part_number) : 0; + if (len > 0) { + sig_field = &cape_sig_fields[CAPE_EE_FIELD_PART_NUMBER]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + /* copy and zero out any remainder */ + if (len > sig_field->size) + len = sig_field->size; + memcpy(p, part_number, len); + if (len < sig_field->size) + memset(p + len, 0, sig_field->size - len); + + has_part_number = 1; + } + + /* if a version is supplied use it */ + len = version ? strlen(version) : 0; + if (len > 0) { + sig_field = &cape_sig_fields[CAPE_EE_FIELD_VERSION]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + /* copy and zero out any remainder */ + if (len > sig_field->size) + len = sig_field->size; + memcpy(p, version, len); + if (len < sig_field->size) + memset(p + len, 0, sig_field->size - len); + } + + /* we must have a part number */ + if (!has_part_number) + return -EINVAL; + + slot->override = 1; + + return 0; +} + +static struct bone_cape_slot * +capemgr_add_slot(struct capemgr_info *info, const char *slot_name, + const char *part_number, const char *version, int prio) +{ + struct bone_cape_slot *slot; + struct device *dev = &info->pdev->dev; + int slotno; + int ret; + + slotno = atomic_inc_return(&info->next_slot_nr) - 1; + + slot = devm_kzalloc(dev, sizeof(*slot), GFP_KERNEL); + if (slot == NULL) + return ERR_PTR(-ENOMEM); + + slot->info = info; + slot->slotno = slotno; + slot->priority = prio; + slot->overlay_id = -1; + + if (slot_name) { + slot->nvmem_cell = nvmem_cell_get(dev, slot_name); + if (IS_ERR(slot->nvmem_cell)) { + ret = PTR_ERR(slot->nvmem_cell); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to get slot eeprom cell\n"); + slot->nvmem_cell = NULL; + goto err_out; + } + } else { + dev_info(dev, "slot #%d: override\n", slotno); + + /* fill in everything with defaults first */ + ret = bone_slot_fill_override(slot, part_number, version); + if (ret != 0) { + dev_err(dev, "slot #%d: override failed\n", slotno); + goto err_out; + } + } + + ret = bone_slot_scan(slot); + if (ret != 0) { + + if (!slot->probe_failed) { + dev_err(dev, "slot #%d: scan failed\n", + slotno); + goto err_out; + } + + dev_err(dev, "slot #%d: No cape found\n", slotno); + /* but all is fine */ + } else { + + dev_info(dev, "slot #%d: '%s'\n", + slotno, slot->text_id); + + ret = bone_cape_slot_sysfs_register(slot); + if (ret != 0) { + dev_err(dev, "slot #%d: sysfs register failed\n", + slotno); + goto err_out; + } + + } + + /* add to the slot list */ + mutex_lock(&info->slots_list_mutex); + list_add_tail(&slot->node, &info->slot_list); + mutex_unlock(&info->slots_list_mutex); + + return slot; + +err_out: + if (slot->nvmem_cell) + nvmem_cell_put(slot->nvmem_cell); + devm_kfree(dev, slot); + return ERR_PTR(ret); +} + +/* return 1 if it makes sense to retry loading */ +static int retry_loading_condition(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct bone_cape_slot *slotn; + int ret; + + dev_dbg(dev, "loader: retry_loading slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + + mutex_lock(&info->slots_list_mutex); + ret = 0; + list_for_each_entry(slotn, &info->slot_list, node) { + /* if same slot or not loading skip */ + if (!slotn->loading || slotn->retry_loading) + continue; + /* at least one cape is still loading (without retrying) */ + ret = 1; + } + mutex_unlock(&info->slots_list_mutex); + return ret; +} + +/* return 1 if this slot is clear to try to load now */ +static int clear_to_load_condition(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + int my_prio = slot->priority; + struct device *dev = &info->pdev->dev; + int ret; + + dev_dbg(dev, "loader: check slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + mutex_lock(&info->slots_list_mutex); + ret = 1; + list_for_each_entry(slot, &info->slot_list, node) { + /* if any slot is loading with lowest priority */ + if (!slot->loading) + continue; + if (slot->priority < my_prio) { + ret = 0; + break; + } + } + mutex_unlock(&info->slots_list_mutex); + return ret; +} + +static int capemgr_loader(void *data) +{ + struct bone_cape_slot *slot = data; + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + int ret, done, other_loading, booting; + + done = 0; + + slot->retry_loading = 0; + + dev_dbg(dev, "loader: before slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* + * We have a basic priority based arbitration system + * Slots have priorities, so the lower priority ones + * should start loading first. So each time we end up + * here. + */ + ret = wait_event_interruptible(info->load_wq, + clear_to_load_condition(slot)); + if (ret < 0) { + dev_warn(dev, "loader, Signal pending\n"); + return ret; + } + + dev_dbg(dev, "loader: after slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* using the return value */ + ret = capemgr_load_slot(slot); + + /* wake up all just in case */ + wake_up_interruptible_all(&info->load_wq); + + if (ret == 0) + goto done; + + dev_dbg(dev, "loader: retrying slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* first attempt has failed; now try each time there's any change */ + slot->retry_loading = 1; + + for (;;) { + booting = (system_state == SYSTEM_BOOTING); + other_loading = retry_loading_condition(slot); + if (!booting && !other_loading) + break; + + /* simple wait for someone to kick us */ + if (other_loading) { + DEFINE_WAIT(__wait); + + prepare_to_wait(&info->load_wq, &__wait, + TASK_INTERRUPTIBLE); + finish_wait(&info->load_wq, &__wait); + } else { + /* always delay when booting */ + msleep(boot_scan_period); + } + + if (signal_pending(current)) { + dev_warn(dev, "loader, Signal pending\n"); + ret = -ERESTARTSYS; + goto done; + } + + /* using the return value */ + ret = capemgr_load_slot(slot); + if (ret == 0) + goto done; + + /* wake up all just in case */ + wake_up_interruptible_all(&info->load_wq); + } + +done: + slot->loading = 0; + slot->retry_loading = 0; + + if (ret == 0) { + dev_dbg(dev, "loader: done slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + } else { + dev_err(dev, "loader: failed to load slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + + /* if it's a override slot remove it */ + if (slot->override) + capemgr_remove_slot(slot); + } + + return ret; +} + +static int +capemgr_probe(struct platform_device *pdev) +{ + struct capemgr_info *info; + struct bone_baseboard *bbrd; + struct bone_cape_slot *slot; + struct device_node *pnode = pdev->dev.of_node; + struct device_node *baseboardmaps_node; + struct device_node *node; + const char *part_number; + const char *version; + const char *board_name; + const char *compatible_name; + char slot_name[16]; + u32 slots_nr; + int i, ret, len, prio; + long val; + char *wbuf, *s, *p, *e; + + /* we don't use platform_data at all; we require OF */ + if (pnode == NULL) + return -ENOTSUPP; + + info = devm_kzalloc(&pdev->dev, + sizeof(struct capemgr_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pdev = pdev; + platform_set_drvdata(pdev, info); + + atomic_set(&info->next_slot_nr, 0); + INIT_LIST_HEAD(&info->slot_list); + mutex_init(&info->slots_list_mutex); + + init_waitqueue_head(&info->load_wq); + + baseboardmaps_node = NULL; + + /* find the baseboard */ + bbrd = &info->baseboard; + + baseboardmaps_node = of_get_child_by_name(pnode, "baseboardmaps"); + if (baseboardmaps_node == NULL) { + dev_err(&pdev->dev, "Failed to get baseboardmaps node"); + ret = -ENODEV; + goto err_exit; + } + + bbrd->nvmem_cell = nvmem_cell_get(&pdev->dev, "baseboard"); + if (IS_ERR(bbrd->nvmem_cell)) { + ret = PTR_ERR(bbrd->nvmem_cell); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get baseboard eeprom cell\n"); + bbrd->nvmem_cell = NULL; + goto err_exit; + } + + ret = bone_baseboard_scan(bbrd); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to scan baseboard eeprom\n"); + goto err_exit; + } + + dev_info(&pdev->dev, "Baseboard: '%s'\n", bbrd->text_id); + + board_name = NULL; + compatible_name = NULL; + for_each_child_of_node(baseboardmaps_node, node) { + /* there must be board-name */ + if (of_property_read_string(node, "board-name", + &board_name) != 0 || + of_property_read_string(node, "compatible-name", + &compatible_name) != 0) + continue; + + if (strcmp(bbrd->board_name, board_name) == 0) + break; + } + of_node_put(baseboardmaps_node); + baseboardmaps_node = NULL; + + if (node == NULL) { + dev_err(&pdev->dev, "Failed to find compatible map for %s\n", + bbrd->board_name); + ret = -ENODEV; + goto err_exit; + } + bbrd->compatible_name = kstrdup(compatible_name, GFP_KERNEL); + if (bbrd->compatible_name == NULL) { + ret = -ENOMEM; + goto err_exit; + } + of_node_put(node); + + /* get slot number */ + ret = of_property_read_u32(pnode, "#slots", &slots_nr); + if (ret != 0) + slots_nr = 0; + + dev_info(&pdev->dev, "compatible-baseboard=%s - #slots=%d\n", + bbrd->compatible_name, slots_nr); + + for (i = 0; i < slots_nr; i++) { + snprintf(slot_name, sizeof(slot_name), "slot%d", i); + slot = capemgr_add_slot(info, slot_name, NULL, NULL, 0); + if (IS_ERR(slot)) { + dev_err(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr)); + ret = PTR_ERR(slot); + goto err_exit; + } + } + + /* iterate over enable_partno (if there) */ + if (enable_partno && strlen(enable_partno) > 0) { + + /* allocate a temporary buffer */ + wbuf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL); + if (wbuf == NULL) { + ret = -ENOMEM; + goto err_exit; + } + + /* add any enable_partno capes */ + s = enable_partno; + while (*s) { + /* form is PART[:REV[:PRIO]],PART.. */ + p = strchr(s, ','); + if (p == NULL) + e = s + strlen(s); + else + e = p; + + /* copy to temp buffer */ + len = e - s; + if (len >= PAGE_SIZE - 1) + len = PAGE_SIZE - 1; + memcpy(wbuf, s, len); + wbuf[len] = '\0'; + + /* move to the next */ + s = *e ? e + 1 : e; + + part_number = wbuf; + + /* default version is NULL & prio is 0 */ + version = NULL; + prio = 0; + + /* now split the rev & prio part */ + p = strchr(wbuf, ':'); + if (p != NULL) { + *p++ = '\0'; + if (*p != ':') + version = p; + p = strchr(p, ':'); + if (p != NULL) { + *p++ = '\0'; + ret = kstrtol(p, 10, &val); + if (ret == 0) + prio = val; + } + } + + dev_info(&pdev->dev, + "enabled_partno PARTNO '%s' VER '%s' PR '%d'\n", + part_number, + version ? version : "N/A", prio); + + /* only immediate slots are allowed here */ + slot = capemgr_add_slot(info, NULL, + part_number, version, prio); + + /* we continue even in case of an error */ + if (IS_ERR_OR_NULL(slot)) { + dev_warn(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr) - 1); + } + } + + devm_kfree(&pdev->dev, wbuf); + } + + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "Failed to pm_runtime_get_sync()\n"); + goto err_exit; + } + + pm_runtime_put(&pdev->dev); + + /* it is safe to create the attribute groups */ + ret = sysfs_create_groups(&pdev->dev.kobj, attr_groups); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to create sysfs attributes\n"); + goto err_exit; + } + /* automatically cleared by driver core now */ + pdev->dev.groups = attr_groups; + + /* now load each (take lock to be sure */ + mutex_lock(&info->slots_list_mutex); + + list_for_each_entry(slot, &info->slot_list, node) { + + /* if matches the disabled ones skip */ + if (bone_match_cape(disable_partno, slot->part_number, + slot->version)) { + dev_info(&pdev->dev, + "Skipping loading of disabled cape with part# %s\n", + slot->part_number); + slot->disabled = 1; + continue; + } + + if (!slot->probe_failed && !slot->loaded) + slot->loading = 1; + } + + /* now start the loader thread(s) (all at once) */ + list_for_each_entry(slot, &info->slot_list, node) { + + if (!slot->loading) + continue; + + slot->loader_thread = kthread_run(capemgr_loader, + slot, "capemgr-loader-%d", + slot->slotno); + if (IS_ERR(slot->loader_thread)) { + dev_warn(&pdev->dev, "slot #%d: Failed to start loader\n", + slot->slotno); + slot->loader_thread = NULL; + } + } + mutex_unlock(&info->slots_list_mutex); + + dev_info(&pdev->dev, "initialized OK.\n"); + + return 0; + +err_exit: + if (bbrd->nvmem_cell) + nvmem_cell_put(bbrd->nvmem_cell); + of_node_put(baseboardmaps_node); + platform_set_drvdata(pdev, NULL); + devm_kfree(&pdev->dev, info); + + return ret; +} + +static int capemgr_remove(struct platform_device *pdev) +{ + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_baseboard *bbrd = &info->baseboard; + struct bone_cape_slot *slot, *slotn; + int ret; + + mutex_lock(&info->slots_list_mutex); + list_for_each_entry_safe(slot, slotn, &info->slot_list, node) + capemgr_remove_slot_no_lock(slot); + mutex_unlock(&info->slots_list_mutex); + + platform_set_drvdata(pdev, NULL); + + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) + return ret; + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + if (bbrd->nvmem_cell) + nvmem_cell_put(bbrd->nvmem_cell); + devm_kfree(&pdev->dev, info); + + return 0; +} + +static struct platform_driver capemgr_driver = { + .probe = capemgr_probe, + .remove = capemgr_remove, + .driver = { + .name = "bone_capemgr", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(capemgr_of_match), + }, +}; + +module_platform_driver(capemgr_driver); + +MODULE_AUTHOR("Pantelis Antoniou"); +MODULE_DESCRIPTION("Beaglebone cape manager"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bone_capemgr"); diff --git a/drivers/misc/cape/Kconfig b/drivers/misc/cape/Kconfig new file mode 100644 index 0000000..a2ef85e --- /dev/null +++ b/drivers/misc/cape/Kconfig @@ -0,0 +1,5 @@ +# +# Capes +# + +source "drivers/misc/cape/beaglebone/Kconfig" diff --git a/drivers/misc/cape/Makefile b/drivers/misc/cape/Makefile new file mode 100644 index 0000000..7c4eb96 --- /dev/null +++ b/drivers/misc/cape/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for cape like devices +# + +obj-y += beaglebone/ diff --git a/drivers/misc/cape/beaglebone/Kconfig b/drivers/misc/cape/beaglebone/Kconfig new file mode 100644 index 0000000..eeb6782 --- /dev/null +++ b/drivers/misc/cape/beaglebone/Kconfig @@ -0,0 +1,10 @@ +# +# Beaglebone capes +# + +config BEAGLEBONE_PINMUX_HELPER + tristate "Beaglebone Pinmux Helper" + depends on ARCH_OMAP2PLUS && OF + default n + help + Say Y here to include support for the pinmux helper diff --git a/drivers/misc/cape/beaglebone/Makefile b/drivers/misc/cape/beaglebone/Makefile new file mode 100644 index 0000000..7f4617a --- /dev/null +++ b/drivers/misc/cape/beaglebone/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for beaglebone capes +# + +obj-$(CONFIG_BEAGLEBONE_PINMUX_HELPER) += bone-pinmux-helper.o diff --git a/drivers/misc/cape/beaglebone/bone-pinmux-helper.c b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c new file mode 100644 index 0000000..d81363a --- /dev/null +++ b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c @@ -0,0 +1,242 @@ +/* + * Pinmux helper driver + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct of_device_id bone_pinmux_helper_of_match[] = { + { + .compatible = "bone-pinmux-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, bone_pinmux_helper_of_match); + +struct pinmux_helper_data { + struct pinctrl *pinctrl; + char *selected_state_name; +}; + +static ssize_t pinmux_helper_show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + const char *name; + + name = data->selected_state_name; + if (name == NULL || strlen(name) == 0) + name = "none"; + return sprintf(buf, "%s\n", name); +} + +static ssize_t pinmux_helper_store_state(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + struct pinctrl_state *state; + char *state_name; + char *s; + int err; + + /* duplicate (as a null terminated string) */ + state_name = kmalloc(count + 1, GFP_KERNEL); + if (state_name == NULL) + return -ENOMEM; + memcpy(state_name, buf, count); + state_name[count] = '\0'; + + /* and chop off newline */ + s = strchr(state_name, '\n'); + if (s != NULL) + *s = '\0'; + + /* try to select default state at first (if it exists) */ + state = pinctrl_lookup_state(data->pinctrl, state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) + dev_err(dev, "Failed to select state %s\n", + state_name); + } else { + dev_err(dev, "Failed to find state %s\n", state_name); + err = PTR_RET(state); + } + + if (err == 0) { + kfree(data->selected_state_name); + data->selected_state_name = state_name; + } + + return err ? err : count; +} + +static DEVICE_ATTR(state, S_IWUSR | S_IRUGO, + pinmux_helper_show_state, pinmux_helper_store_state); + +static struct attribute *pinmux_helper_attributes[] = { + &dev_attr_state.attr, + NULL +}; + +static const struct attribute_group pinmux_helper_attr_group = { + .attrs = pinmux_helper_attributes, +}; + +static int bone_pinmux_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pinmux_helper_data *data; + struct pinctrl_state *state; + char *state_name; + const char *mode_name; + int mode_len; + int err; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Failed to allocate data\n"); + err = -ENOMEM; + goto err_no_mem; + } + + state_name = kmalloc(strlen(PINCTRL_STATE_DEFAULT) + 1, + GFP_KERNEL); + if (state_name == NULL) { + dev_err(dev, "Failed to allocate state name\n"); + err = -ENOMEM; + goto err_no_state_mem; + } + data->selected_state_name = state_name; + strcpy(data->selected_state_name, PINCTRL_STATE_DEFAULT); + + platform_set_drvdata(pdev, data); + + data->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(data->pinctrl)) { + dev_err(dev, "Failed to get pinctrl\n"); + err = PTR_RET(data->pinctrl); + goto err_no_pinctrl; + } + + /* See if an initial mode is specified in the device tree */ + mode_name = of_get_property(dev->of_node, "mode", &mode_len); + + err = -1; + if (mode_name != NULL ) { + state_name = kmalloc(mode_len + 1, GFP_KERNEL); + if (state_name == NULL) { + dev_err(dev, "Failed to allocate state name\n"); + err = -ENOMEM; + goto err_no_mode_mem; + } + strncpy(state_name, mode_name, mode_len); + + /* try to select requested mode */ + state = pinctrl_lookup_state(data->pinctrl, state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) { + dev_warn(dev, "Unable to select requested mode %s\n", state_name); + kfree(state_name); + } else { + kfree(data->selected_state_name); + data->selected_state_name = state_name; + dev_notice(dev, "Set initial pinmux mode to %s\n", state_name); + } + } + } + + /* try to select default state if mode_name failed */ + if ( err != 0) { + state = pinctrl_lookup_state(data->pinctrl, + data->selected_state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) { + dev_err(dev, "Failed to select default state\n"); + goto err_no_state; + } + } else { + data->selected_state_name = '\0'; + } + } + + /* Register sysfs hooks */ + err = sysfs_create_group(&dev->kobj, &pinmux_helper_attr_group); + if (err) { + dev_err(dev, "Failed to create sysfs group\n"); + goto err_no_sysfs; + } + + return 0; + +err_no_sysfs: +err_no_state: +err_no_mode_mem: + devm_pinctrl_put(data->pinctrl); +err_no_pinctrl: + devm_kfree(dev, data->selected_state_name); +err_no_state_mem: + devm_kfree(dev, data); +err_no_mem: + return err; +} + +static int bone_pinmux_helper_remove(struct platform_device *pdev) +{ + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + sysfs_remove_group(&dev->kobj, &pinmux_helper_attr_group); + kfree(data->selected_state_name); + devm_pinctrl_put(data->pinctrl); + devm_kfree(dev, data); + + return 0; +} + +struct platform_driver bone_pinmux_helper_driver = { + .probe = bone_pinmux_helper_probe, + .remove = bone_pinmux_helper_remove, + .driver = { + .name = "bone-pinmux-helper", + .owner = THIS_MODULE, + .of_match_table = bone_pinmux_helper_of_match, + }, +}; + +module_platform_driver(bone_pinmux_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou"); +MODULE_DESCRIPTION("Beaglebone pinmux helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bone-pinmux-helper"); diff --git a/drivers/misc/cape_bone_argus/Kconfig b/drivers/misc/cape_bone_argus/Kconfig new file mode 100644 index 0000000..1b39661 --- /dev/null +++ b/drivers/misc/cape_bone_argus/Kconfig @@ -0,0 +1,7 @@ +comment "Argus cape driver for beaglebone black" + +config CAPE_BONE_ARGUS + tristate "Argus Cape Driver" + default M + help + Argus Cape Driver diff --git a/drivers/misc/cape_bone_argus/Makefile b/drivers/misc/cape_bone_argus/Makefile new file mode 100644 index 0000000..5482562 --- /dev/null +++ b/drivers/misc/cape_bone_argus/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Argus cape +# + +obj-$(CONFIG_CAPE_BONE_ARGUS) += cape_bone_argus.o diff --git a/drivers/misc/cape_bone_argus/cape_bone_argus.c b/drivers/misc/cape_bone_argus/cape_bone_argus.c new file mode 100644 index 0000000..c434218 --- /dev/null +++ b/drivers/misc/cape_bone_argus/cape_bone_argus.c @@ -0,0 +1,415 @@ +/* -*- linux-c -*- */ + +/* Linux Kernel Module for Breakaway Systems UPS control. + * + * PUBLIC DOMAIN + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Module to sync file systems leaving them mounted read-only, + * then signal the UPS that it is safe to remove + * power, and finally halt the processor. + * Also to allow kicking the watchdog from user mode. + */ +#undef DEBUG_ARGUS + +#define N_GPIOS 9 /* Total number of GPIOS used */ + +#define REQ_GPIO_IDX 0 /* Indices got GPIOS */ +#define ACK_GPIO_IDX 1 +#define WDG_GPIO_IDX 2 +#define LED1_GREEN_IDX 3 +#define LED1_RED_IDX 4 +#define LED2_GREEN_IDX 5 +#define LED2_RED_IDX 6 +#define GEN_OUT1_IDX 7 +#define GEN_OUT2_IDX 8 + +static struct argus_ups_info { /* As there is only one UPS device we can make this static */ + struct fasync_struct *async_queue; /* asynchronous readers */ + struct platform_device *pdev; + struct pwm_device *pwm_dev; + struct gpio gpios[N_GPIOS]; +} info = {NULL, NULL, NULL, /* Some fields filled in by device tree, probe, etc. */ + { + {-1, GPIOF_IN, "Powerdown request"}, + {-1, GPIOF_OUT_INIT_LOW, "Powerdown acknowledge" }, + {-1, GPIOF_OUT_INIT_LOW, "Watchdog"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 1 Green"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 1 Red"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 2 Green"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 2 Red"}, + {-1, GPIOF_OUT_INIT_LOW, "General Output #1"}, + {-1, GPIOF_OUT_INIT_LOW, "General Output #2"} + }, +}; + + +static const struct of_device_id argus_ups_of_ids[] = { + { .compatible = "argus-ups" }, + { } +}; + +static int argus_ups_major; /* Major device number */ + +static struct class *argus_ups_class; /* /sys/class */ + +dev_t argus_ups_dev; /* Device number */ + +static struct cdev *argus_ups_cdev; /* Character device details */ + +static void argus_ups_function(struct work_struct *ignored); /* Work function */ + +static DECLARE_DELAYED_WORK(argus_ups_work, argus_ups_function); /* Kernel workqueue glue */ + +static struct workqueue_struct *argus_ups_workqueue; /* Kernel workqueue */ + +static int debug = 0; +module_param(debug, int, S_IRUGO); +MODULE_PARM_DESC(debug, "Debug flag"); + +static int shutdown = 1; +module_param(shutdown, int, S_IRUGO); +MODULE_PARM_DESC(shutdown, "Shutdown flag"); + +#ifdef DEBUG_ARGUS +static char* fs_type_names[] = {"vfat", "ext4"}; /* File system names that may need syncing. */ +#endif + +/* Just kick watchdog */ + +static ssize_t argus_ups_write(struct file *filp, const char __user *buf, size_t count, + loff_t *f_pos) +{ + int i; + if (debug >= 3) { + printk("Writing to watchdog - count:%d\n", count); + } + for (i = 0; i < count; i++) { + gpio_set_value(info.gpios[WDG_GPIO_IDX].gpio, 1); /* Set it */ + msleep(10); /* Wait */ + gpio_set_value(info.gpios[WDG_GPIO_IDX].gpio, 0); /* End clearing it */ + msleep(10); + } + return count; /* Always returns what we sent, regardsless */ +} + +static long argus_ups_ioctl(struct file *file, + unsigned int ioctl, + unsigned long param) +{ + if (debug >= 4) { + printk(KERN_ERR "ioctl: %d, param: %ld\n", ioctl, param); + } + switch(ioctl) { + case 10001: { + debug = param; + printk("Debug set to %d\n", debug); + break; + } + case 10002: { + unsigned char value = param & 0x0F; + unsigned char mask = (param >> 4) & 0x0F; + int i; /* Loop iterator */ + if (mask == 0) { + printk(KERN_ERR "Pointless mask of zero!\n"); + } + for (i = 0; i < 4; i++) { /* For all four LEDS */ + if (mask & (1 << i)) { /* Only masked values */ + if (value & (1 << i)) { /* On - so gpio is hi */ + if (debug >= 4) { + printk("Setting %d hi, ", + info.gpios[LED1_GREEN_IDX + i].gpio); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX + i].gpio, 1); + } + else { /* Off - so gpio is lo */ + if (debug >= 4) { + printk("Setting %d lo, ", + info.gpios[LED1_GREEN_IDX + i].gpio); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX + i].gpio, 0); + } + } + } + if (debug >= 4) { + printk("\n"); + } + break; + } + case 10003: { + gpio_set_value(info.gpios[GEN_OUT1_IDX].gpio, param & 1); + break; + } + case 10004: { + gpio_set_value(info.gpios[GEN_OUT2_IDX].gpio, param & 1); + break; + } + default: + { + printk(KERN_ERR "Invalid ioctl %d\n", ioctl); + return -1; + } + } + return 0; +} + +static int argus_ups_fasync(int fd, struct file *filp, int mode) +{ + printk(KERN_ERR "In argus_ups_fasync() fd:%d, filp:%p, mode:%d\n", fd, filp, mode); + return fasync_helper(fd, filp, mode, &info.async_queue); +} + +static struct file_operations argus_ups_fops = { /* Only file operation is to kick watchdog via a write */ + .owner = THIS_MODULE, + .llseek = NULL, + .read = NULL, + .unlocked_ioctl = argus_ups_ioctl, + .write = argus_ups_write, + .open = NULL, + .release = NULL, + .fasync = argus_ups_fasync, +}; + +#ifdef DEBUG_ARGUS +static void remount_sb(struct super_block *sb) +{ + int flags = MS_RDONLY; + int result = sb->s_op->remount_fs(sb, &flags, ""); + if (debug) { + printk("Processing superblock %p\n", sb); + printk("Remount operation returned %d\n", result); + } +} +#endif + +static void argus_ups_function(struct work_struct *ignored) +{ + static int testdata = 0; /* Data for test */ + int i; /* Iterator */ + testdata++; + if (!gpio_get_value(info.gpios[REQ_GPIO_IDX].gpio)) { + queue_delayed_work(argus_ups_workqueue, &argus_ups_work, HZ/100); /* Re-queue in 10mS*/ + return; + } + printk(KERN_ERR "Request received\n"); + if (debug) { + printk("Shutdown request received from UPS\n"); + } + if (!shutdown) { + printk("Shutdown request ignored\n"); + return; + } + + if (debug) { + printk("Sending async kill SIGIO to %p\n", info.async_queue); + } + if (info.async_queue) { /* Try and tell usermode to halt system */ + kill_fasync(&info.async_queue, SIGIO, POLL_IN); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX].gpio, 0); /* Turn off green LED1 */ + for (i = 0; i < 300; i++) { /* Toggle acknowledge at 10 Hz for 15 seconds */ + if (debug >= 2) { + printk("Waiting for first shutdown request:%d\n", i); + } + gpio_set_value(info.gpios[ACK_GPIO_IDX].gpio, i & 1); /* Toggle acknowledge */ + gpio_set_value(info.gpios[LED1_RED_IDX].gpio, i & 1); /* and LED1 red */ + msleep(50); /* Wait in 50ms increments */ + } + + { + char *argv[] = { "/sbin/halt", NULL }; + static char *envp[] = { + "HOME=/", + "TERM=linux", + "PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin", NULL }; + + call_usermodehelper( argv[0], argv, envp, UMH_WAIT_PROC ); + } + for (i = 0; i < 300; i++) { /* Toggle acknowledge at 10 Hz for 15 more seconds */ + if (debug >= 2) { + printk("Waiting for second shutdown request:%d\n", i); + } + gpio_set_value(info.gpios[ACK_GPIO_IDX].gpio, i & 1); /* Toggle acknowledge */ + gpio_set_value(info.gpios[LED1_RED_IDX].gpio, i & 1); /* and LED1 red */ + msleep(50); /* Wait in 50ms increments */ + } + printk(KERN_ERR "Usermode failed to halt system\n"); + kernel_halt(); /* Last resort - may give some oopss */ +} + + +static int argus_ups_probe(struct platform_device *pdev) /* Entry point */ +{ + struct pinctrl *pinctrl; + struct device_node *pnode = pdev->dev.of_node; + int i; + int ret; + printk("Init UPS module - debug=%d, shutdown=%d\n", + debug, shutdown); + platform_set_drvdata(pdev, &info); + info.pdev = pdev; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + return -1; + } + ret = of_property_read_u32(pnode, "debug", &debug); + if (ret != 0) { + dev_err(&pdev->dev, "Unable to read debug parameter\n"); + } + else { + printk("Debug parameter read from DT:%d\n", debug); + } + + ret = of_property_read_u32(pnode, "shutdown", &shutdown); + if (ret != 0) { + dev_err(&pdev->dev, "Unable to read shutdown parameter\n"); + } + else { + printk("Shutdown parameter read from DT:%d\n", shutdown); + } + + ret = of_gpio_count(pnode); + + if (ret != N_GPIOS) { + printk(KERN_ERR "Wrong number of gpios"); + return -1; + } + + for (i = 0; i < of_gpio_count(pnode); i++) { + ret = of_get_gpio_flags(pnode, i, NULL); + if (debug) { + printk("GPIO#%d:%d\n", i, ret); + } + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "unable to get GPIO %d\n", i); + goto err_no_gpio; + } + info.gpios[i].gpio = ret; + } + + + ret = alloc_chrdev_region(&argus_ups_dev, 0, 2, "argus_ups"); + argus_ups_major = MAJOR(argus_ups_dev); + if (ret) { + printk(KERN_ERR "Error %d adding argus_ups\n", ret); + return -1; + } + if (debug) { + printk("argus_ups major: %d\n", argus_ups_major); + } + argus_ups_cdev = cdev_alloc(); /* Make this a character device */ + argus_ups_cdev->ops = &argus_ups_fops; /* File operations */ + argus_ups_cdev->owner = THIS_MODULE; /* Top level device */ + ret = cdev_add(argus_ups_cdev, argus_ups_dev, 1); /* Add it to the kernel */ + if (ret) { + printk(KERN_ERR "cdev_add returned %d\n", ret); + unregister_chrdev_region(0, 1); + return -1; + } + ret = gpio_request_array(info.gpios, N_GPIOS); + if (ret) { + printk(KERN_ERR "Error %d requesting GPIOs\n", ret); + unregister_chrdev_region(0, 1); + return -1; + } + + argus_ups_class = class_create(THIS_MODULE, "argus_ups"); /* /sys/class entry for udev */ + if (IS_ERR(argus_ups_class)) { + printk(KERN_ERR "Error creating argus_ups_class\n"); + unregister_chrdev_region(0, 1); + return -1; + } + device_create(argus_ups_class, NULL, MKDEV(argus_ups_major, 0), NULL, "argus_ups"); + argus_ups_workqueue = create_singlethread_workqueue("argus_ups"); + INIT_DELAYED_WORK(&argus_ups_work, argus_ups_function); + queue_delayed_work(argus_ups_workqueue, &argus_ups_work, 0); /* Start work immediately */ + + return 0; +err_no_gpio: + return ret; + +} + + +static void argus_ups_cleanup(void) +{ + printk("Module cleanup called\n"); + while (cancel_delayed_work(&argus_ups_work) == 0) { + flush_workqueue(argus_ups_workqueue); /* Make sure all work is completed */ + } + destroy_workqueue(argus_ups_workqueue); + gpio_free_array(info.gpios, N_GPIOS); + device_destroy(argus_ups_class, argus_ups_dev); + class_destroy(argus_ups_class); + unregister_chrdev_region(argus_ups_dev, 1); + cdev_del(argus_ups_cdev); +} + + + +static int argus_ups_remove(struct platform_device *pdev) +{ + printk("In argus_ups_remove()\n"); + argus_ups_cleanup(); + printk("After cleanup\n"); + return 0; +} + +#define ARGUS_UPS_PM_OPS NULL + +struct platform_driver argus_ups_driver = { + .probe = argus_ups_probe, + .remove = argus_ups_remove, + .driver = { + .name = "argus-ups", + .owner = THIS_MODULE, + .pm = ARGUS_UPS_PM_OPS, + .of_match_table = argus_ups_of_ids, + }, +}; + + +static int __init argus_ups_init(void) +{ + return platform_driver_probe(&argus_ups_driver, + argus_ups_probe); +} + +static void __exit argus_ups_exit(void) +{ + platform_driver_unregister(&argus_ups_driver); + printk("After driver unregister\n"); +} + +module_init(argus_ups_init); +module_exit(argus_ups_exit); + +/* + * Get rid of taint message. + */ +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Lambert"); /* Who wrote this module? */ +MODULE_DESCRIPTION("Argus UPS control"); /* What does this module do */ +MODULE_ALIAS("platform:argus-ups"); +MODULE_DEVICE_TABLE(of, argus_ups_of_ids); diff --git a/drivers/misc/devovmgr.c b/drivers/misc/devovmgr.c new file mode 100644 index 0000000..82d2b07 --- /dev/null +++ b/drivers/misc/devovmgr.c @@ -0,0 +1,1305 @@ +/* + * Device overlay manager + * + * Copyright (C) 2015 Konsulko Group + * Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +enum dovmgr_type { + ITEM_PCI, + ITEM_USB +}; + +struct dovmgr_item; + +struct dovmgr_dev_item { + struct dovmgr_item *item; + struct list_head node; + struct device *dev; + const struct firmware *fw; + struct device_node *overlay; + int overlay_id; + struct work_struct work; +}; + +struct dovmgr_item { + struct config_item item; + char *path; + bool enable; + char *overlay_name; + struct mutex dev_item_mutex; + struct list_head dev_item_list; + enum dovmgr_type type; + union { + struct pci_device_id pci; + struct usb_device_id usb; + }; +}; + +struct config_group dovmgr_pci_group; +struct config_group dovmgr_usb_group; + +static inline struct dovmgr_item *to_dovmgr_item(struct config_item *cfsitem) +{ + if (!cfsitem) + return NULL; + + return container_of(cfsitem, struct dovmgr_item, item); +} + +static int dovmgr_notifier_action(struct config_group *group, + unsigned long action, struct device *dev, + int (*do_match)(struct dovmgr_item *item, struct device *dev), + int (*do_action)(struct dovmgr_item *item, unsigned long action, + struct device *dev)) +{ + struct config_item *cfsitem; + struct dovmgr_item *item; + int ret; + + /* only handle device notifiers */ + if (action != BUS_NOTIFY_ADD_DEVICE && + action != BUS_NOTIFY_DEL_DEVICE && + action != BUS_NOTIFY_REMOVED_DEVICE) + return 0; + + ret = 0; + mutex_lock(&group->cg_subsys->su_mutex); + list_for_each_entry(cfsitem, &group->cg_children, ci_entry) { + item = to_dovmgr_item(cfsitem); + if (!item->enable || !(*do_match)(item, dev)) + continue; + + ret = (*do_action)(item, action, dev); + if (ret != 0) + break; + } + mutex_unlock(&group->cg_subsys->su_mutex); + return ret; +} + +#if IS_ENABLED(CONFIG_PCI) +/* copy of drivers/pci/pci.h */ +static inline const struct pci_device_id * +pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev) +{ + if ((id->vendor == PCI_ANY_ID || id->vendor == dev->vendor) && + (id->device == PCI_ANY_ID || id->device == dev->device) && + (id->subvendor == PCI_ANY_ID || + id->subvendor == dev->subsystem_vendor) && + (id->subdevice == PCI_ANY_ID || + id->subdevice == dev->subsystem_device) && + !((id->class ^ dev->class) & id->class_mask)) + return id; + return NULL; +} + +static int dovmgr_pci_item_match(struct dovmgr_item *item, struct device *dev) +{ + struct pci_dev *pdev; + + BUG_ON(item->type != ITEM_PCI); + pdev = to_pci_dev(dev); + + return pci_match_one_device(&item->pci, pdev) != NULL; +} +#endif + +#if IS_ENABLED(CONFIG_USB) +/* in drivers/usb/core/driver.c */ +extern int usb_match_device(struct usb_device *dev, + const struct usb_device_id *id); + +static int dovmgr_usb_item_match(struct dovmgr_item *item, struct device *dev) +{ + struct usb_device *udev; + + BUG_ON(item->type != ITEM_USB); + udev = to_usb_device(dev); + + return usb_match_device(udev, &item->usb); +} +#endif + +static struct dovmgr_dev_item *dovmgr_lookup_dev_item(struct dovmgr_item *item, + struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + list_for_each_entry(ditem, &item->dev_item_list, node) + if (ditem->dev == dev) + return ditem; + return NULL; +} + +static void dovmgr_item_work_func(struct work_struct *work) +{ + struct dovmgr_dev_item *ditem = container_of(work, + struct dovmgr_dev_item, work); + struct dovmgr_item *item = ditem->item; + struct device *dev; + struct device_node *np; + int err; + + mutex_lock(&item->dev_item_mutex); + + dev = ditem->dev; + np = dev->of_node; + if (!dev || !np || !item->overlay_name || ditem->overlay_id >= 0) + goto out_unlock; + + pr_info("%s: %s %s\n", __func__, + kobject_name(&dev->kobj), of_node_full_name(np)); + + err = request_firmware_direct(&ditem->fw, item->overlay_name, dev); + if (err != 0) { + pr_err("%s: %s failed to load firmware '%s'\n", __func__, + kobject_name(&dev->kobj), item->overlay_name); + goto out_unlock; + } + + of_fdt_unflatten_tree((void *)ditem->fw->data, &ditem->overlay); + if (ditem->overlay == NULL) { + pr_err("%s: %s failed to load firmware '%s'\n", __func__, + kobject_name(&dev->kobj), item->overlay_name); + goto out_release_fw; + } + + /* mark it as detached */ + of_node_set_flag(ditem->overlay, OF_DETACHED); + + /* perform resolution */ + err = of_resolve_phandles(ditem->overlay); + if (err != 0) { + pr_err("%s: %s failed to resolve tree\n", __func__, + kobject_name(&dev->kobj)); + goto out_release_overlay; + } + + err = of_overlay_create_target_root(ditem->overlay, np); + if (err < 0) { + pr_err("%s: %s failed to create overlay\n", __func__, + kobject_name(&dev->kobj)); + goto out_release_overlay; + } + ditem->overlay_id = err; + +out_unlock: + mutex_unlock(&item->dev_item_mutex); + return; + +out_release_overlay: + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + ditem->overlay = NULL; +out_release_fw: + release_firmware(ditem->fw); + ditem->fw = NULL; + goto out_unlock; +} + +/* dev item list mutex lock must be held */ +static int dovmgr_add_dev_item(struct dovmgr_item *item, struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + /* first make sure there's no duplicate */ + if (dovmgr_lookup_dev_item(item, dev)) + return -EEXIST; + + /* add the device item */ + ditem = kzalloc(sizeof(*ditem), GFP_KERNEL); + if (!ditem) + return -ENOMEM; + ditem->overlay_id = -1; + ditem->dev = get_device(dev); + INIT_WORK(&ditem->work, dovmgr_item_work_func); + ditem->item = item; + + list_add_tail(&ditem->node, &item->dev_item_list); + + pr_info("%s: added device %s from item's %s list\n", __func__, + kobject_name(&dev->kobj), + config_item_name(&item->item)); + + /* now schedule the overlay application */ + if (item->overlay_name) + schedule_work(&ditem->work); + + return 0; +} + +static int dovmgr_remove_dev_item(struct dovmgr_item *item, struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + /* find it */ + ditem = dovmgr_lookup_dev_item(item, dev); + if (!ditem) + return -ENODEV; + + if (work_pending(&ditem->work)) + cancel_work_sync(&ditem->work); + + if (ditem->overlay_id >= 0) { + of_overlay_destroy(ditem->overlay_id); + ditem->overlay_id = -1; + + } + + if (ditem->overlay) { + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + ditem->overlay = NULL; + } + + if (ditem->fw) { + /* TODO release_firmware(ditem->fw); */ + release_firmware(ditem->fw); + ditem->fw = NULL; + } + + put_device(ditem->dev); + list_del(&ditem->node); + + kfree(ditem); + + pr_info("%s: removed device %s from item's %s list\n", __func__, + kobject_name(&dev->kobj), + config_item_name(&item->item)); + + return 0; +} + +static int dovmgr_item_notify(struct dovmgr_item *item, + unsigned long action, struct device *dev) +{ + int ret; + + ret = 0; + mutex_lock(&item->dev_item_mutex); + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + pr_info("%s: BUS_NOTIFY_ADD_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + + ret = dovmgr_add_dev_item(item, dev); + if (ret != 0) + goto out_unlock; + + break; + + case BUS_NOTIFY_DEL_DEVICE: + pr_info("%s: BUS_NOTIFY_DEL_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + break; + + case BUS_NOTIFY_REMOVED_DEVICE: + pr_info("%s: BUS_NOTIFY_REMOVE_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + + ret = dovmgr_remove_dev_item(item, dev); + if (ret != 0) + goto out_unlock; + + break; + } + +out_unlock: + mutex_unlock(&item->dev_item_mutex); + + return ret; +} + +#if IS_ENABLED(CONFIG_PCI) +static int dovmgr_pci_add_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (!item->enable || !dovmgr_pci_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_ADD_DEVICE, dev); +} + +static int dovmgr_pci_removed_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (item->enable || !dovmgr_pci_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_REMOVED_DEVICE, dev); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static int dovmgr_usb_add_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (item->enable || !dovmgr_usb_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_ADD_DEVICE, dev); +} + +static int dovmgr_usb_removed_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (!item->enable || !dovmgr_usb_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_REMOVED_DEVICE, dev); +} +#endif + +static int dovmgr_item_set_enable(struct dovmgr_item *item, bool new_enable) +{ + int ret; + + if (new_enable == item->enable) + return 0; + + item->enable = new_enable; + switch (item->type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + ret = bus_for_each_dev(&pci_bus_type, NULL, item, + new_enable ? dovmgr_pci_add_iterator : + dovmgr_pci_removed_iterator); + if (ret != 0) + return ret; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + ret = bus_for_each_dev(&usb_bus_type, NULL, item, + new_enable ? dovmgr_usb_add_iterator : + dovmgr_usb_removed_iterator); + if (ret != 0) + return ret; + break; +#endif + default: + break; + } + return 0; +} + + +CONFIGFS_ATTR_STRUCT(dovmgr_item); +#define DOVMGR_ITEM_ATTR(_name, _mode, _show, _store) \ +struct dovmgr_item_attribute dovmgr_item_attr_##_name = \ + __CONFIGFS_ATTR(_name, _mode, _show, _store) +#define DOVMGR_ITEM_ATTR_RO(_name, _show) \ +struct dovmgr_item_attribute dovmgr_item_attr_##_name = \ + __CONFIGFS_ATTR_RO(_name, _show) + +CONFIGFS_BIN_ATTR_STRUCT(dovmgr_item); +#define DOVMGR_ITEM_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) \ +struct dovmgr_item_bin_attribute dovmgr_item_bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) +#define DOVMGR_ITEM_BIN_ATTR_RO(_name, _read, _priv, _max) \ +struct dovmgr_item_bin_attribute dovmgr_item_bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR_RO(_name, _read, _priv, _max) + +static ssize_t dovmgr_item_str_show(struct dovmgr_item *item, + char *page, char **strp) +{ + return snprintf(page, PAGE_SIZE, "%s\n", + *strp ? *strp : ""); +} + +static ssize_t dovmgr_item_str_store(struct dovmgr_item *item, + const char *page, size_t count, char **strp) +{ + const char *s; + int len; + + /* copy to path buffer (and make sure it's always zero terminated */ + len = strnlen(page, PAGE_SIZE); + if (len >= PAGE_SIZE) + return -EINVAL; + s = page + len; + while (len > 0 && *--s == '\n') + len--; + if (len == 0) + return -EINVAL; + + if (*strp) + kfree(*strp); + *strp = kmalloc(len + 1, GFP_KERNEL); + if (!*strp) + return -ENOMEM; + memcpy(*strp, page, len); + (*strp)[len + 1] = '\0'; + + return count; +} + +static ssize_t dovmgr_item_path_show(struct dovmgr_item *item, char *page) +{ + return dovmgr_item_str_show(item, page, &item->path); +} + +static ssize_t dovmgr_item_path_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + return dovmgr_item_str_store(item, page, count, &item->path); +} + +static ssize_t dovmgr_item_enable_show(struct dovmgr_item *item, char *page) +{ + return snprintf(page, PAGE_SIZE, "%u\n", !!item->enable); +} + +static ssize_t dovmgr_item_enable_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + + ret = dovmgr_item_set_enable(item, !!val); + if (ret != 0) + return ret; + + return count; +} + +static ssize_t dovmgr_item_overlay_show(struct dovmgr_item *item, char *page) +{ + ssize_t ret; + + mutex_lock(&item->dev_item_mutex); + ret = snprintf(page, PAGE_SIZE, "%s\n", item->overlay_name ? + item->overlay_name : ""); + mutex_unlock(&item->dev_item_mutex); + return ret; +}; + + +static ssize_t dovmgr_item_overlay_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + ssize_t ret; + + mutex_lock(&item->dev_item_mutex); + kfree(item->overlay_name); + item->overlay_name = kstrndup(page, PAGE_SIZE, GFP_KERNEL); + if (!item->overlay_name) + ret = -ENOMEM; + else + ret = count; + mutex_unlock(&item->dev_item_mutex); + return ret; +} + +static ssize_t dovmgr_item_status_show(struct dovmgr_item *item, char *page) +{ + struct dovmgr_dev_item *ditem; + char *p, *e; + int len; + + p = page; + e = page + PAGE_SIZE; + + mutex_lock(&item->dev_item_mutex); + list_for_each_entry(ditem, &item->dev_item_list, node) { + len = snprintf(p, e - p, "%s:%s:%d\n", + kobject_name(&ditem->dev->kobj), + of_node_full_name(ditem->dev->of_node), + ditem->overlay_id); + p += len; + if (p >= e - 1) + break; + } + mutex_unlock(&item->dev_item_mutex); + + return p - page; +} + +DOVMGR_ITEM_ATTR(path, S_IRUGO | S_IWUSR, + dovmgr_item_path_show, dovmgr_item_path_store); +DOVMGR_ITEM_ATTR_RO(status, dovmgr_item_status_show); +DOVMGR_ITEM_ATTR(enable, S_IRUGO | S_IWUSR, + dovmgr_item_enable_show, dovmgr_item_enable_store); +DOVMGR_ITEM_ATTR(overlay, S_IRUGO | S_IWUSR, + dovmgr_item_overlay_show, dovmgr_item_overlay_store); + +#if IS_ENABLED(CONFIG_PCI) +static ssize_t dovmgr_item_pci_device_show(struct dovmgr_item *item, char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.device); +} + +static ssize_t dovmgr_item_pci_device_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.device = val; + return count; +} + +static ssize_t dovmgr_item_pci_vendor_show(struct dovmgr_item *item, char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.vendor); +} + +static ssize_t dovmgr_item_pci_vendor_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.vendor = val; + return count; +} + +static ssize_t dovmgr_item_pci_subdevice_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%08x\n", item->pci.subdevice); +} + +static ssize_t dovmgr_item_pci_subdevice_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.subdevice = val; + return count; +} + +static ssize_t dovmgr_item_pci_subvendor_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%08x\n", item->pci.subvendor); +} + +static ssize_t dovmgr_item_pci_subvendor_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.subvendor = val; + return count; +} + +static ssize_t dovmgr_item_pci_class_show(struct dovmgr_item *item, char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.class); +} + +static ssize_t dovmgr_item_pci_class_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.class = val; + return count; +} + +static ssize_t dovmgr_item_pci_class_mask_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.class_mask); +} + +static ssize_t dovmgr_item_pci_class_mask_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.class_mask = val; + return count; +} + +DOVMGR_ITEM_ATTR(device, S_IRUGO | S_IWUSR, + dovmgr_item_pci_device_show, dovmgr_item_pci_device_store); +DOVMGR_ITEM_ATTR(vendor, S_IRUGO | S_IWUSR, + dovmgr_item_pci_vendor_show, dovmgr_item_pci_vendor_store); +DOVMGR_ITEM_ATTR(subdevice, S_IRUGO | S_IWUSR, + dovmgr_item_pci_subdevice_show, dovmgr_item_pci_subdevice_store); +DOVMGR_ITEM_ATTR(subvendor, S_IRUGO | S_IWUSR, + dovmgr_item_pci_subvendor_show, dovmgr_item_pci_subvendor_store); +DOVMGR_ITEM_ATTR(class, S_IRUGO | S_IWUSR, + dovmgr_item_pci_class_show, dovmgr_item_pci_class_store); +DOVMGR_ITEM_ATTR(class_mask, S_IRUGO | S_IWUSR, + dovmgr_item_pci_class_mask_show, dovmgr_item_pci_class_mask_store); +#endif + +#if IS_ENABLED(CONFIG_USB) +static ssize_t dovmgr_item_usb_idProduct_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", + item->usb.idProduct); +} + +static ssize_t dovmgr_item_usb_idProduct_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->usb.idProduct = val; + return count; +} + +static ssize_t dovmgr_item_usb_idVendor_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", + item->usb.idVendor); +} + +static ssize_t dovmgr_item_usb_idVendor_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->usb.idVendor = val; + return count; +} + +DOVMGR_ITEM_ATTR(idProduct, S_IRUGO | S_IWUSR, + dovmgr_item_usb_idProduct_show, dovmgr_item_usb_idProduct_store); +DOVMGR_ITEM_ATTR(idVendor, S_IRUGO | S_IWUSR, + dovmgr_item_usb_idVendor_show, dovmgr_item_usb_idVendor_store); +#endif + +#if IS_ENABLED(CONFIG_PCI) +static struct configfs_attribute *dovmgr_pci_attrs[] = { + &dovmgr_item_attr_path.attr, + &dovmgr_item_attr_status.attr, + &dovmgr_item_attr_enable.attr, + &dovmgr_item_attr_overlay.attr, + &dovmgr_item_attr_device.attr, + &dovmgr_item_attr_vendor.attr, + &dovmgr_item_attr_subdevice.attr, + &dovmgr_item_attr_subvendor.attr, + &dovmgr_item_attr_class.attr, + &dovmgr_item_attr_class_mask.attr, + NULL, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct configfs_attribute *dovmgr_usb_attrs[] = { + &dovmgr_item_attr_path.attr, + &dovmgr_item_attr_enable.attr, + &dovmgr_item_attr_status.attr, + &dovmgr_item_attr_overlay.attr, + &dovmgr_item_attr_idVendor.attr, + &dovmgr_item_attr_idProduct.attr, + NULL, +}; +#endif + +static void dovmgr_release(struct config_item *cfsitem) +{ + struct dovmgr_item *item = to_dovmgr_item(cfsitem); + + /* disable item (this removes the overlay and all) */ + dovmgr_item_set_enable(item, false); + + kfree(item->path); + kfree(item); +} + +CONFIGFS_ATTR_OPS(dovmgr_item); +static struct configfs_item_operations dovmgr_item_ops = { + .release = dovmgr_release, + .show_attribute = dovmgr_item_attr_show, + .store_attribute = dovmgr_item_attr_store, +}; + +#if IS_ENABLED(CONFIG_PCI) +static struct config_item_type dovmgr_pci_item_type = { + .ct_item_ops = &dovmgr_item_ops, + .ct_attrs = dovmgr_pci_attrs, + .ct_owner = THIS_MODULE, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct config_item_type dovmgr_usb_item_type = { + .ct_item_ops = &dovmgr_item_ops, + .ct_attrs = dovmgr_usb_attrs, + .ct_owner = THIS_MODULE, +}; +#endif + +static struct config_item *dovmgr_group_make_item( + struct config_group *group, const char *name, + enum dovmgr_type type) +{ + struct dovmgr_item *item; + struct config_item_type *item_type; + + switch (type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + item_type = &dovmgr_pci_item_type; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + item_type = &dovmgr_usb_item_type; + break; +#endif + default: + return ERR_PTR(-EINVAL); + }; + + item = kzalloc(sizeof(*item), GFP_KERNEL); + if (!item) + return ERR_PTR(-ENOMEM); + + item->type = type; + item->enable = false; + mutex_init(&item->dev_item_mutex); + INIT_LIST_HEAD(&item->dev_item_list); + + switch (type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + /* default for matching device/vendor */ + item->pci.vendor = PCI_ANY_ID; + item->pci.device = PCI_ANY_ID; + item->pci.subvendor = PCI_ANY_ID; + item->pci.subdevice = PCI_ANY_ID; + item->pci.class = 0; + item->pci.class_mask = 0; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + /* default */ + item->usb.match_flags = USB_DEVICE_ID_MATCH_DEVICE; + break; +#endif + default: + return ERR_PTR(-EINVAL); + }; + + config_item_init_type_name(&item->item, name, item_type); + return &item->item; +} + +#if IS_ENABLED(CONFIG_PCI) +static struct config_item *dovmgr_group_pci_make_item( + struct config_group *group, const char *name) +{ + return dovmgr_group_make_item(group, name, ITEM_PCI); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct config_item *dovmgr_group_usb_make_item( + struct config_group *group, const char *name) +{ + return dovmgr_group_make_item(group, name, ITEM_USB); +} +#endif + +static void dovmgr_group_drop_item(struct config_group *group, + struct config_item *cfsitem) +{ + struct dovmgr_item *item = to_dovmgr_item(cfsitem); + + switch (item->type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + break; +#endif + default: + break; + } + config_item_put(&item->item); +} + +#if IS_ENABLED(CONFIG_PCI) +static struct configfs_group_operations dovmgr_pci_group_ops = { + .make_item = dovmgr_group_pci_make_item, + .drop_item = dovmgr_group_drop_item, +}; + +static struct config_item_type dovmgr_pci_type = { + .ct_group_ops = &dovmgr_pci_group_ops, + .ct_owner = THIS_MODULE, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct configfs_group_operations dovmgr_usb_group_ops = { + .make_item = dovmgr_group_usb_make_item, + .drop_item = dovmgr_group_drop_item, +}; + +static struct config_item_type dovmgr_usb_type = { + .ct_group_ops = &dovmgr_usb_group_ops, + .ct_owner = THIS_MODULE, +}; +#endif + +static struct configfs_group_operations dovmgr_ops = { + /* empty - we don't allow anything to be created */ +}; + +static struct config_item_type dovmgr_type = { + .ct_group_ops = &dovmgr_ops, + .ct_owner = THIS_MODULE, +}; + +struct config_group *dovmgr_def_groups[] = { +#if IS_ENABLED(CONFIG_PCI) + &dovmgr_pci_group, +#endif +#if IS_ENABLED(CONFIG_USB) + &dovmgr_usb_group, +#endif + NULL +}; + +static struct configfs_subsystem dovmgr_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "dovmgr", + .ci_type = &dovmgr_type, + }, + .default_groups = dovmgr_def_groups, + }, + .su_mutex = __MUTEX_INITIALIZER(dovmgr_subsys.su_mutex), +}; + +#if IS_ENABLED(CONFIG_PCI) +static int pci_dev_instantiate(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *bus_dev; + struct of_changeset cset; + struct device_node *np, *npb; + int ret; + + npb = NULL; + + /* already instantiated */ + if (dev->of_node) { + pr_debug("%s: dev=%s of_node=%s\n", __func__, + kobject_name(&dev->kobj), + of_node_full_name(dev->of_node)); + return 0; + } + + bus_dev = &pdev->bus->dev; + + pr_debug("%s: %s: %02x:%02x.%02x - node %s%s\n", __func__, + kobject_name(&dev->kobj), + pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + bus_dev->of_node ? of_node_full_name(bus_dev->of_node) : "", + pci_is_bridge(pdev) ? " bridge" : ""); + + /* to create the node, the bus must be present */ + if (!bus_dev->of_node) { + pr_err("%s: No node for %s because no bus device node\n", + __func__, kobject_name(&dev->kobj)); + return 0; + } + + of_changeset_init(&cset); + + np = of_changeset_create_device_node(&cset, bus_dev->of_node, + "%s/pci-%04x-%02x-%02x.%d", + of_node_full_name(bus_dev->of_node), + pci_domain_nr(pdev->bus), pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + if (IS_ERR(np)) { + ret = PTR_ERR(np); + goto out_cset_fail; + } + + ret = of_changeset_add_property_stringf(&cset, np, "compatible", + "pciclass,%04x", (pdev->class >> 8) & 0xffffff); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_u32(&cset, np, "vendor", + pdev->vendor); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_u32(&cset, np, "device", + pdev->device); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, np, "status", "okay"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_bool(&cset, np, "auto-generated"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_attach_node(&cset, np); + if (ret != 0) + goto out_cset_fail; + + /* are we creating a bridge; swell */ + npb = NULL; + if (pci_is_bridge(pdev) && !pdev->subordinate->dev.of_node) { + + pr_debug("%s: %s: bus->dev=%s subordinate=%s\n", __func__, + kobject_name(&dev->kobj), + kobject_name(&pdev->bus->dev.kobj), + kobject_name(&pdev->subordinate->dev.kobj)); + + npb = of_changeset_create_device_node(&cset, bus_dev->of_node, + "%s/pci-%04x-%02x", + of_node_full_name(bus_dev->of_node), + pci_domain_nr(pdev->subordinate), + pdev->subordinate->number); + if (IS_ERR(npb)) { + ret = PTR_ERR(npb); + goto out_cset_fail; + } + + ret = of_changeset_add_property_string(&cset, npb, "compatible", "generic,pci-bus"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, npb, "device_type", "pci"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, npb, "status", "okay"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_bool(&cset, npb, "auto-generated"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_attach_node(&cset, npb); + if (ret != 0) + goto out_cset_fail; + } + + ret = of_changeset_apply(&cset); + if (ret != 0) + goto out_cset_fail; + + /* permanently commit */ + of_changeset_destroy(&cset); + + /* bind the node to the device */ + dev->of_node = np; + ret = sysfs_create_link(&dev->kobj, &dev->of_node->kobj, + "of_node"); + if (ret) + pr_warn("%s: %s Error %d creating of_node link\n", + __func__, kobject_name(&dev->kobj), ret); + + if (npb) { + pdev->subordinate->dev.of_node = npb; + ret = sysfs_create_link(&pdev->subordinate->dev.kobj, &npb->kobj, + "of_node"); + if (ret) + pr_warn("%s: %s Error %d creating of_node link\n", + __func__, kobject_name(&dev->kobj), ret); + } + + + return 0; + +out_cset_fail: + pr_err("%s: %s Failed to apply changeset (err=%d)\n", __func__, + kobject_name(&dev->kobj), ret); + of_changeset_destroy(&cset); + return ret; +} + +static int pci_dev_uninstantiate(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np, *npb; + struct of_changeset cset; + int ret; + + /* device node must exist */ + np = dev->of_node; + if (!np) + return 0; + + /* and the auto-generated property */ + if (!of_property_read_bool(np, "auto-generated")) + return 0; + + of_changeset_init(&cset); + + ret = of_changeset_detach_node(&cset, np); + if (ret != 0) + goto out_cset_fail; + + npb = NULL; + if (pci_is_bridge(pdev)) + npb = pdev->subordinate->dev.of_node; + + if (npb != NULL) { + ret = of_changeset_detach_node(&cset, npb); + if (ret != 0) + goto out_cset_fail; + } + + ret = of_changeset_apply(&cset); + if (ret != 0) + goto out_cset_fail; + + dev->of_node = NULL; + if (npb != NULL) + pdev->subordinate->dev.of_node = NULL; + + pr_debug("%s: %s: %02x:%02x.%02x\n", __func__, + kobject_name(&dev->kobj), + pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + /* TODO iterate over the properties and free */ + + return 0; + +out_cset_fail: + of_changeset_destroy(&cset); + + return ret; +} + +static int dovmgr_pci_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + int ret; + + if (action == BUS_NOTIFY_ADD_DEVICE) + pci_dev_instantiate(to_pci_dev(arg)); + + ret = dovmgr_notifier_action(&dovmgr_pci_group, action, arg, + dovmgr_pci_item_match, dovmgr_item_notify); + + if (action == BUS_NOTIFY_REMOVED_DEVICE) + pci_dev_uninstantiate(to_pci_dev(arg)); + + return ret; +} + +static struct notifier_block dovmgr_pci_notifier = { + .notifier_call = dovmgr_pci_notify, +}; + +static int pci_instantiate_iterator(struct device *dev, void *data) +{ + return pci_dev_instantiate(to_pci_dev(dev)); +} + +static int dovmgr_pci_init(void) +{ + int ret; + + config_group_init_type_name(&dovmgr_pci_group, "pci", &dovmgr_pci_type); + ret = bus_register_notifier(&pci_bus_type, &dovmgr_pci_notifier); + if (ret != 0) { + pr_err("%s: bus_register_notifier() failed\n", __func__); + return ret; + } + + ret = bus_for_each_dev(&pci_bus_type, NULL, NULL, + pci_instantiate_iterator); + if (ret != 0) { + pr_err("%s: bus_for_each_dev() failed\n", __func__); + return ret; + } + + return 0; +} + +static void dovmgr_pci_cleanup(void) +{ + bus_unregister_notifier(&pci_bus_type, &dovmgr_pci_notifier); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static int dovmgr_usb_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + return dovmgr_notifier_action(&dovmgr_usb_group, action, arg, + dovmgr_usb_item_match, dovmgr_item_notify); +} + +static struct notifier_block dovmgr_usb_notifier = { + .notifier_call = dovmgr_usb_notify, +}; + +static int dovmgr_usb_init(void) +{ + int ret; + + config_group_init_type_name(&dovmgr_usb_group, "usb", &dovmgr_usb_type); + ret = bus_register_notifier(&usb_bus_type, &dovmgr_usb_notifier); + if (ret != 0) { + pr_err("%s: bus_register_notifier() failed\n", __func__); + return ret; + } + return 0; +} + +static void dovmgr_usb_cleanup(void) +{ + bus_unregister_notifier(&usb_bus_type, &dovmgr_usb_notifier); +} +#endif + +static int __init dovmgr_init(void) +{ + int ret; + + config_group_init(&dovmgr_subsys.su_group); + +#if IS_ENABLED(CONFIG_PCI) + ret = dovmgr_pci_init(); + if (ret != 0) + goto err_no_pci_init; +#endif +#if IS_ENABLED(CONFIG_USB) + ret = dovmgr_usb_init(); + if (ret != 0) + goto err_no_usb_init; +#endif + + ret = configfs_register_subsystem(&dovmgr_subsys); + if (ret != 0) { + pr_err("%s: failed to register subsys\n", __func__); + goto err_no_configfs; + } + pr_info("%s: OK\n", __func__); + return 0; + +err_no_configfs: +#if IS_ENABLED(CONFIG_USB) + dovmgr_usb_cleanup(); +err_no_usb_init: +#endif +#if IS_ENABLED(CONFIG_PCI) + dovmgr_pci_cleanup(); +err_no_pci_init: +#endif + return ret; +} +late_initcall(dovmgr_init); diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 9536852f..04f2e1f 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -96,17 +96,4 @@ config EEPROM_DIGSY_MTC_CFG If unsure, say N. -config EEPROM_SUNXI_SID - tristate "Allwinner sunxi security ID support" - depends on ARCH_SUNXI && SYSFS - help - This is a driver for the 'security ID' available on various Allwinner - devices. - - Due to the potential risks involved with changing e-fuses, - this driver is read-only. - - This driver can also be built as a module. If so, the module - will be called sunxi_sid. - endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 9507aec..fc1e81d 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -4,5 +4,4 @@ obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o obj-$(CONFIG_EEPROM_MAX6875) += max6875.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o -obj-$(CONFIG_EEPROM_SUNXI_SID) += sunxi_sid.o obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 2d3db81..004dfdb 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -3,6 +3,7 @@ * * Copyright (C) 2005-2007 David Brownell * Copyright (C) 2008 Wolfram Sang, Pengutronix + * Copyright (C) 2015 Pantelis Antoniou, Konsulko Group * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,6 +24,9 @@ #include #include #include +#include +#include +#include /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. @@ -63,12 +67,16 @@ struct at24_data { * but not from changes by other I2C masters. */ struct mutex lock; - struct bin_attribute bin; u8 *writebuf; unsigned write_max; unsigned num_addresses; + struct regmap_config *regmap_config; + struct regmap *regmap; + struct nvmem_config *nvmem_config; + struct nvmem_device *nvmem_dev; + /* * Some chips tie up multiple I2C addresses; dummy devices reserve * them for us, and we'll use them with SMBus calls. @@ -131,6 +139,8 @@ static const struct i2c_device_id at24_ids[] = { }; MODULE_DEVICE_TABLE(i2c, at24_ids); +static DEFINE_IDA(at24_ida); + /*-------------------------------------------------------------------------*/ /* @@ -301,17 +311,6 @@ static ssize_t at24_read(struct at24_data *at24, return retval; } -static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - return at24_read(at24, buf, off, count); -} - - /* * Note that if the hardware write-protect pin is pulled high, the whole * chip is normally write protected. But there are plenty of product @@ -432,21 +431,10 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, return retval; } -static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - if (unlikely(off >= attr->size)) - return -EFBIG; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - return at24_write(at24, buf, off, count); -} - /*-------------------------------------------------------------------------*/ +/* panto: using the EEPROM framework macc is superfluous */ + /* * This lets other kernel code access the eeprom data. For example, it * might hold a board's Ethernet address, or board-specific calibration @@ -492,6 +480,91 @@ static void at24_get_ofdata(struct i2c_client *client, { } #endif /* CONFIG_OF */ +static int regmap_at24_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct i2c_client *client = context; + struct at24_data *at24; + unsigned int offset; + int ret; + + /* reg bits is hardcoded to 32 bits */ + BUG_ON(reg_size != 4); + offset = __raw_readl(reg); + + at24 = i2c_get_clientdata(client); + if (at24 == NULL) + return -ENODEV; + + /* val bytes is always 1 */ + BUG_ON(at24->regmap_config->val_bits != 8); + + ret = at24_read(at24, val, offset, val_size); + if (ret < 0) + return ret; + if (ret != val_size) + return -EINVAL; + + return 0; +} + +static int regmap_at24_gather_write(void *context, + const void *reg, size_t reg_size, + const void *val, size_t val_size) +{ + struct i2c_client *client = context; + struct at24_data *at24; + unsigned int offset; + int ret; + + at24 = i2c_get_clientdata(client); + if (at24 == NULL) + return -ENODEV; + + BUG_ON(reg_size != 4); + offset = __raw_readl(reg); + + /* val bytes is always 1 */ + BUG_ON(at24->regmap_config->val_bits != 8); + + ret = at24_write(at24, val, offset, val_size); + if (ret < 0) + return ret; + if (ret != val_size) + return -EINVAL; + + return 0; +} + +static int regmap_at24_write(void *context, const void *data, size_t count) +{ + struct i2c_client *client = context; + struct at24_data *at24; + unsigned int reg_bytes, offset; + + at24 = i2c_get_clientdata(client); + if (at24 == NULL) + return -ENODEV; + + reg_bytes = at24->regmap_config->reg_bits / 8; + offset = reg_bytes; + + BUG_ON(reg_bytes != 4); + BUG_ON(count <= offset); + + return regmap_at24_gather_write(context, data, reg_bytes, + data + offset, count - offset); +} + +static struct regmap_bus regmap_at24_bus = { + .read = regmap_at24_read, + .write = regmap_at24_write, + .gather_write = regmap_at24_gather_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct at24_platform_data chip; @@ -502,6 +575,10 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) int err; unsigned i, num_addresses; kernel_ulong_t magic; + struct regmap_config *regmap_config; + struct regmap *regmap; + struct nvmem_config *nvmem_config; + struct nvmem_device *nvmem_dev; if (client->dev.platform_data) { chip = *(struct at24_platform_data *)client->dev.platform_data; @@ -569,16 +646,75 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } } + regmap_config = devm_kzalloc(&client->dev, sizeof(*regmap_config), + GFP_KERNEL); + if (IS_ERR(regmap_config)) { + err = PTR_ERR(regmap_config); + dev_err(&client->dev, "%s: regmap_config allocation failed (%d)\n", + __func__, err); + return err; + } + + /* use 32 bits as registers, they don't appear on the wire anyway */ + regmap_config->reg_bits = 32; + regmap_config->val_bits = 8; + regmap_config->cache_type = REGCACHE_NONE; + regmap_config->max_register = chip.byte_len; + if (chip.flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else num_addresses = DIV_ROUND_UP(chip.byte_len, (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + /* we can't use devm_regmap_init_i2c due to the many i2c clients */ + regmap = devm_regmap_init(&client->dev, ®map_at24_bus, + client, regmap_config); + if (IS_ERR(regmap)) { + err = PTR_ERR(regmap); + dev_err(&client->dev, "%s: regmap allocation failed (%d)\n", + __func__, err); + return err; + } + + nvmem_config = devm_kzalloc(&client->dev, sizeof(*nvmem_config), + GFP_KERNEL); + if (IS_ERR(nvmem_config)) { + err = PTR_ERR(nvmem_config); + dev_err(&client->dev, "%s: nvmem_config allocation failed (%d)\n", + __func__, err); + return err; + } + nvmem_config->dev = &client->dev; + nvmem_config->name = "at24-"; + nvmem_config->id = ida_simple_get(&at24_ida, 0, 0, GFP_KERNEL); + nvmem_config->owner = THIS_MODULE; + if (nvmem_config->id < 0) { + err = nvmem_config->id; + dev_err(&client->dev, "%s: eeprom id allocation failed (%d)\n", + __func__, err); + return err; + } + + nvmem_dev = nvmem_register(nvmem_config); + if (IS_ERR(nvmem_dev)) { + err = PTR_ERR(nvmem_dev); + dev_err(&client->dev, "%s: nvmem_register failed (%d)\n", + __func__, err); + goto err_out; + } + at24 = devm_kzalloc(&client->dev, sizeof(struct at24_data) + num_addresses * sizeof(struct i2c_client *), GFP_KERNEL); - if (!at24) - return -ENOMEM; + if (!at24) { + err = -ENOMEM; + goto err_out; + } + + at24->regmap = regmap; + at24->regmap_config = regmap_config; + at24->nvmem_config = nvmem_config; + at24->nvmem_dev = nvmem_dev; mutex_init(&at24->lock); at24->use_smbus = use_smbus; @@ -586,16 +722,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->chip = chip; at24->num_addresses = num_addresses; - /* - * Export the EEPROM bytes through sysfs, since that's convenient. - * By default, only root should see the data (maybe passwords etc) - */ - sysfs_bin_attr_init(&at24->bin); - at24->bin.attr.name = "eeprom"; - at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; - at24->bin.read = at24_bin_read; - at24->bin.size = chip.byte_len; - at24->macc.read = at24_macc_read; writable = !(chip.flags & AT24_FLAG_READONLY); @@ -606,9 +732,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->macc.write = at24_macc_write; - at24->bin.write = at24_bin_write; - at24->bin.attr.mode |= S_IWUSR; - if (write_max > io_limit) write_max = io_limit; if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) @@ -618,8 +741,10 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) /* buffer (data + address at the beginning) */ at24->writebuf = devm_kzalloc(&client->dev, write_max + 2, GFP_KERNEL); - if (!at24->writebuf) - return -ENOMEM; + if (!at24->writebuf) { + err = -ENOMEM; + goto err_out; + } } else { dev_warn(&client->dev, "cannot write due to controller restrictions."); @@ -640,14 +765,10 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } } - err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); - if (err) - goto err_clients; - i2c_set_clientdata(client, at24); dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n", - at24->bin.size, client->name, + at24->chip.byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); if (use_smbus == I2C_SMBUS_WORD_DATA || use_smbus == I2C_SMBUS_BYTE_DATA) { @@ -663,10 +784,14 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; err_clients: + for (i = 1; i < num_addresses; i++) if (at24->client[i]) i2c_unregister_device(at24->client[i]); +err_out: + ida_simple_remove(&at24_ida, nvmem_config->id); + return err; } @@ -676,11 +801,12 @@ static int at24_remove(struct i2c_client *client) int i; at24 = i2c_get_clientdata(client); - sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); for (i = 1; i < at24->num_addresses; i++) i2c_unregister_device(at24->client[i]); + nvmem_unregister(at24->nvmem_dev); + return 0; } diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c deleted file mode 100644 index 8385177..0000000 --- a/drivers/misc/eeprom/sunxi_sid.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright (c) 2013 Oliver Schinagl - * http://www.linux-sunxi.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * This driver exposes the Allwinner security ID, efuses exported in byte- - * sized chunks. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sunxi-sid" - -struct sunxi_sid_data { - void __iomem *reg_base; - unsigned int keysize; -}; - -/* We read the entire key, due to a 32 bit read alignment requirement. Since we - * want to return the requested byte, this results in somewhat slower code and - * uses 4 times more reads as needed but keeps code simpler. Since the SID is - * only very rarely probed, this is not really an issue. - */ -static u8 sunxi_sid_read_byte(const struct sunxi_sid_data *sid_data, - const unsigned int offset) -{ - u32 sid_key; - - if (offset >= sid_data->keysize) - return 0; - - sid_key = ioread32be(sid_data->reg_base + round_down(offset, 4)); - sid_key >>= (offset % 4) * 8; - - return sid_key; /* Only return the last byte */ -} - -static ssize_t sid_read(struct file *fd, struct kobject *kobj, - struct bin_attribute *attr, char *buf, - loff_t pos, size_t size) -{ - struct platform_device *pdev; - struct sunxi_sid_data *sid_data; - int i; - - pdev = to_platform_device(kobj_to_dev(kobj)); - sid_data = platform_get_drvdata(pdev); - - if (pos < 0 || pos >= sid_data->keysize) - return 0; - if (size > sid_data->keysize - pos) - size = sid_data->keysize - pos; - - for (i = 0; i < size; i++) - buf[i] = sunxi_sid_read_byte(sid_data, pos + i); - - return i; -} - -static struct bin_attribute sid_bin_attr = { - .attr = { .name = "eeprom", .mode = S_IRUGO, }, - .read = sid_read, -}; - -static int sunxi_sid_remove(struct platform_device *pdev) -{ - device_remove_bin_file(&pdev->dev, &sid_bin_attr); - dev_dbg(&pdev->dev, "driver unloaded\n"); - - return 0; -} - -static const struct of_device_id sunxi_sid_of_match[] = { - { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16}, - { .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512}, - {/* sentinel */}, -}; -MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); - -static int sunxi_sid_probe(struct platform_device *pdev) -{ - struct sunxi_sid_data *sid_data; - struct resource *res; - const struct of_device_id *of_dev_id; - u8 *entropy; - unsigned int i; - - sid_data = devm_kzalloc(&pdev->dev, sizeof(struct sunxi_sid_data), - GFP_KERNEL); - if (!sid_data) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - sid_data->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(sid_data->reg_base)) - return PTR_ERR(sid_data->reg_base); - - of_dev_id = of_match_device(sunxi_sid_of_match, &pdev->dev); - if (!of_dev_id) - return -ENODEV; - sid_data->keysize = (int)of_dev_id->data; - - platform_set_drvdata(pdev, sid_data); - - sid_bin_attr.size = sid_data->keysize; - if (device_create_bin_file(&pdev->dev, &sid_bin_attr)) - return -ENODEV; - - entropy = kzalloc(sizeof(u8) * sid_data->keysize, GFP_KERNEL); - for (i = 0; i < sid_data->keysize; i++) - entropy[i] = sunxi_sid_read_byte(sid_data, i); - add_device_randomness(entropy, sid_data->keysize); - kfree(entropy); - - dev_dbg(&pdev->dev, "loaded\n"); - - return 0; -} - -static struct platform_driver sunxi_sid_driver = { - .probe = sunxi_sid_probe, - .remove = sunxi_sid_remove, - .driver = { - .name = DRV_NAME, - .of_match_table = sunxi_sid_of_match, - }, -}; -module_platform_driver(sunxi_sid_driver); - -MODULE_AUTHOR("Oliver Schinagl "); -MODULE_DESCRIPTION("Allwinner sunxi security id driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/misc/tieqep.c b/drivers/misc/tieqep.c new file mode 100644 index 0000000..d4698c2 --- /dev/null +++ b/drivers/misc/tieqep.c @@ -0,0 +1,744 @@ +/* + * TI eQEP driver for AM33xx devices + * + * Copyright (C) 2013 Nathaniel R. Lewis - http://teknoman117.wordpress.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * sysfs entries + * - position = absolute - current position; relative - last latched value + * - mode => 0 - absolute; 1 - relative + * - period => sampling period for the hardware + * - enable => 0 - eQEP disabled, 1 - eQEP enabled + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +// Include the PWMSS subsystem headers, because this unit controls +// whether our clock source is enabled, and if eQEP is to be +// enabled, we need to start the clock +#include "../pwm/pwm-tipwmss.h" + +// eQEP register offsets from its base IO address +#define QPOSCNT 0x0000 +#define QPOSINIT 0x0004 +#define QPOSMAX 0x0008 +#define QPOSCMP 0x000C +#define QPOSILAT 0x0010 +#define QPOSSLAT 0x0014 +#define QPOSLAT 0x0018 +#define QUTMR 0x001C +#define QUPRD 0x0020 +#define QWDTMR 0x0024 +#define QWDPRD 0x0026 +#define QDECCTL 0x0028 +#define QEPCTL 0x002A +#define QCAPCTL 0x002C +#define QPOSCTL 0x002E +#define QEINT 0x0030 +#define QFLG 0x0032 +#define QCLR 0x0034 +#define QFRC 0x0036 +#define QEPSTS 0x0038 +#define QCTMR 0x003A +#define QCPRD 0x003C +#define QCTMRLAT 0x003E +#define QCPRDLAT 0x0040 +#define QREVID 0x005C + +// Bits for the QDECTL register +#define QSRC1 (0x0001 << 15) +#define QSRC0 (0x0001 << 14) +#define SOEN (0x0001 << 13) +#define SPSEL (0x0001 << 12) +#define XCR (0x0001 << 11) +#define SWAP (0x0001 << 10) +#define IGATE (0x0001 << 9) +#define QAP (0x0001 << 8) +#define QBP (0x0001 << 7) +#define QIP (0x0001 << 6) +#define QSP (0x0001 << 5) + +// Bits for the QEPCTL register +#define FREESOFT1 (0x0001 << 15) +#define FREESOFT0 (0x0001 << 14) +#define PCRM1 (0x0001 << 13) +#define PCRM0 (0x0001 << 12) +#define SEI1 (0x0001 << 11) +#define SEI0 (0x0001 << 10) +#define IEI1 (0x0001 << 9) +#define IEI0 (0x0001 << 8) +#define SWI (0x0001 << 7) +#define SEL (0x0001 << 6) +#define IEL1 (0x0001 << 5) +#define IEL0 (0x0001 << 4) +#define PHEN (0x0001 << 3) +#define QCLM (0x0001 << 2) +#define UTE (0x0001 << 1) +#define WDE (0x0001 << 0) + +// Bits for the QCAPCTL register +#define CEN (0x0001 << 15) +#define CCPS2 (0x0001 << 6) +#define CCPS0 (0x0001 << 5) +#define CCPS1 (0x0001 << 4) +#define UPPS3 (0x0001 << 3) +#define UPPS2 (0x0001 << 2) +#define UPPS1 (0x0001 << 1) +#define UPPS0 (0x0001 << 0) + +// Bits for the QPOSCTL register +#define PCSHDW (0x0001 << 15) +#define PCLOAD (0x0001 << 14) +#define PCPOL (0x0001 << 13) +#define PCE (0x0001 << 12) +#define PCSPW11 (0x0001 << 11) +#define PCSPW10 (0x0001 << 10) +#define PCSPW9 (0x0001 << 9) +#define PCSPW8 (0x0001 << 8) +#define PCSPW7 (0x0001 << 7) +#define PCSPW6 (0x0001 << 6) +#define PCSPW5 (0x0001 << 5) +#define PCSPW4 (0x0001 << 4) +#define PCSPW3 (0x0001 << 3) +#define PCSPW2 (0x0001 << 2) +#define PCSPW1 (0x0001 << 1) +#define PCSPW0 (0x0001 << 0) + +// Bits for the interrupt registers +#define EQEP_INTERRUPT_MASK (0x0FFF) +#define UTOF (0x0001 << 11) + +// Bits to control the clock in the PWMSS subsystem +#define PWMSS_EQEPCLK_EN BIT(4) +#define PWMSS_EQEPCLK_STOP_REQ BIT(5) +#define PWMSS_EQEPCLK_EN_ACK BIT(4) + +// Modes for the eQEP unit +// Absolute - the position entry represents the current position of the encoder. +// Poll this value and it will be notified every period nanoseconds +// Relative - the position entry represents the last latched position of the encoder +// This value is latched every period nanoseconds and the internal counter +// is subsequenty reset +#define TIEQEP_MODE_ABSOLUTE 0 +#define TIEQEP_MODE_RELATIVE 1 + +// Structure defining the characteristics of the eQEP unit +struct eqep_chip +{ + // Platform device for this eQEP unit + struct platform_device *pdev; + + // Pointer to the base of the memory of the eQEP unit + void __iomem *mmio_base; + + // SYSCLKOUT to the eQEP unit + u32 clk_rate; + + // IRQ for the eQEP unit + u16 irq; + + // Mode of the eQEP unit + u8 mode; + + // work stuct for the notify userspace work + struct work_struct notify_work; + + // Backup for driver suspension + u16 prior_qepctl; + u16 prior_qeint; +}; + +// Notify userspace work +void notify_handler (struct work_struct *work) +{ + // Get a reference to the eQEP driver + struct eqep_chip *eqep = container_of(work, struct eqep_chip, notify_work); + + // Notify the userspace + sysfs_notify(&eqep->pdev->dev.kobj, NULL, "position"); +} + +// eQEP Interrupt handler +static irqreturn_t eqep_irq_handler(int irq, void *dev_id) +{ + // Get the instance information + struct platform_device *pdev = dev_id; + struct eqep_chip *eqep = platform_get_drvdata(pdev); + + // Get the interrupt flags + u16 iflags = readw(eqep->mmio_base + QFLG) & EQEP_INTERRUPT_MASK; + + // Check the interrupt source(s) + if(iflags & UTOF) + { + // Handle the unit timer overflow interrupt by notifying any potential pollers + schedule_work(&eqep->notify_work); + } + + // Clear interrupt flags (write back triggered flags to the clear register) + writew(iflags, eqep->mmio_base + QCLR); + + // Return that the IRQ was handled successfully + return IRQ_HANDLED; +} + +// Function to read whether the eQEP unit is enabled or disabled +static ssize_t eqep_get_enabled(struct device *dev, struct device_attribute *attr, char *buf) +{ + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Read the qep control register and mask all but the enabled bit + u16 enabled = readw(eqep->mmio_base + QEPCTL) & PHEN; + + // Return the target in string format + return sprintf(buf, "%u\n", (enabled) ? 1 : 0); +} + +// Function to set if the eQEP is enabled +static ssize_t eqep_set_enabled(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + // Get the instance structure + int rc; + u16 val; + u8 enabled; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Convert the input string to an 8 bit uint + if ((rc = kstrtou8(buf, 0, &enabled))) + return rc; + + // Get the existing state of QEPCTL + val = readw(eqep->mmio_base + QEPCTL); + + // If we passed a number that is not 0, enable the eQEP + if(enabled) + { + // Enable the eQEP (Set PHEN in QEPCTL) + val = val | PHEN; + } else + { + // Disable the eQEP (Clear PHEN in QEPCTL) + val = val & ~PHEN; + } + + // Write flags back to control register + writew(val, eqep->mmio_base + QEPCTL); + + // Return buffer length consumed (all) + return count; +} + +// Function to read the current position of the eQEP +static ssize_t eqep_get_position(struct device *dev, struct device_attribute *attr, char *buf) +{ + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // A variable to return the position with + s32 position = 0; + + // Check the mode + if(eqep->mode == TIEQEP_MODE_ABSOLUTE) + { + // If we are in absolute mode, we need the current value of the eQEP hardware + position = readl(eqep->mmio_base + QPOSCNT); + } else if(eqep->mode == TIEQEP_MODE_RELATIVE) + { + // If we are in relative mode, we need the last latched value of the eQEP hardware + position = readl(eqep->mmio_base + QPOSLAT); + } + + // Return the target in string format + return sprintf(buf, "%d\n", position); +} + +// Function to set the position of the eQEP hardware +static ssize_t eqep_set_position(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + // Get the instance structure + int rc; + s32 position; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Convert the input string to an 8 bit uint + if ((rc = kstrtos32(buf, 0, &position))) + return rc; + + // If we are in absolute mode, set the position of the encoder, discard relative mode because thats pointless + if(eqep->mode == TIEQEP_MODE_ABSOLUTE) + { + // If we are in absolute mode, we need the current value of the eQEP hardware + writel(position, eqep->mmio_base + QPOSCNT); + } + + // Return buffer length consumed (all) + return count; +} + +// Function to read the period of the unit time event timer +static ssize_t eqep_get_timer_period(struct device *dev, struct device_attribute *attr, char *buf) +{ + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + u64 period = 0; + + // Check if the period timer is enabled, if not, return 0 + if(!(readw(eqep->mmio_base + QEPCTL) & UTE)) + { + return sprintf(buf, "0\n"); + } + + // Convert from counts per interrupt back into period_ns + period = readl(eqep->mmio_base + QUPRD); + period = period * NSEC_PER_SEC; + do_div(period, eqep->clk_rate); + + // Otherwise write out the data + return sprintf(buf, "%llu\n", period); +} + +// Function to set the unit timer period. 0 = off, greater than zero sets the period +static ssize_t eqep_set_timer_period(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + u16 tmp; + u64 period; + + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Convert the passed string to a 64 bit uint + if((rc = kstrtou64(buf, 0, &period))) + return rc; + + // Disable the unit timer before modifying its period register + tmp = readw(eqep->mmio_base + QEPCTL); + tmp = tmp & ~UTE & ~QCLM; + writew(tmp, eqep->mmio_base + QEPCTL); + + // Zero the unit timer counter register + writel(0x0, eqep->mmio_base + QUTMR); + + // If we want the timer enabled (a period that is non zero has been passed) + if(period) + { + // Otherwise calculate the period + period = period * eqep->clk_rate; + do_div(period, NSEC_PER_SEC); + + // Set this period into the unit timer period register + writel(period & 0x00000000FFFFFFFF, eqep->mmio_base + QUPRD); + + // Enable the unit timer, and latch QPOSLAT to QPOSCNT on overflow + tmp = readw(eqep->mmio_base + QEPCTL); + tmp = tmp | UTE | QCLM; + writew(tmp, eqep->mmio_base + QEPCTL); + } + + // Return consumed buffer count + return count; +} + +// Function to read the mode of the eQEP hardware +static ssize_t eqep_get_mode(struct device *dev, struct device_attribute *attr, char *buf) +{ + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Return the mode + return sprintf(buf, "%u\n", eqep->mode); +} + +// Function to set the mode of the eQEP hardware +static ssize_t eqep_set_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + // Get the instance structure + int rc; + u16 val; + u8 tmp_mode; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Convert the input string to an 8 bit uint + if ((rc = kstrtou8(buf, 0, &tmp_mode))) + return rc; + + // Get the existing state of QEPCTL + val = readw(eqep->mmio_base + QEPCTL); + + // Check the mode that was passed + if(tmp_mode == TIEQEP_MODE_ABSOLUTE) + { + // In absolute mode, we don't want to reset the intenal hardware based on time, + // so disable the unit timer position reset (Set PCRM[1:0] = 0) + val = val & ~PCRM1 & ~PCRM0; + + // Store the mode as absolute + eqep->mode = TIEQEP_MODE_ABSOLUTE; + } else if(tmp_mode == TIEQEP_MODE_RELATIVE) + { + // In relative mode, we want to latch the value of the eQEP hardware on the + // overflow of the unit timer. So enable the unit timer position reset + // (Set PCRM[1:0] = 3) + val = val | PCRM1 | PCRM0; + + // Store the mode as relative + eqep->mode = TIEQEP_MODE_RELATIVE; + } + + // Write the new value back to the control register + writew(val, eqep->mmio_base + QEPCTL); + + // Return buffer length consumed (all) + return count; +} + +// Bind read/write functions to sysfs entries +static DEVICE_ATTR(enabled, 0644, eqep_get_enabled, eqep_set_enabled); +static DEVICE_ATTR(position, 0644, eqep_get_position, eqep_set_position); +static DEVICE_ATTR(period, 0644, eqep_get_timer_period, eqep_set_timer_period); +static DEVICE_ATTR(mode, 0644, eqep_get_mode, eqep_set_mode); + +// Array holding all of the sysfs entries +static const struct attribute *eqep_attrs[] = { + &dev_attr_enabled.attr, + &dev_attr_position.attr, + &dev_attr_period.attr, + &dev_attr_mode.attr, + NULL, +}; + +// Driver function group +static const struct attribute_group eqep_device_attr_group = { + .attrs = (struct attribute **) eqep_attrs, +}; + +// Driver compatibility list +static struct of_device_id eqep_of_match[] = +{ + { .compatible = "ti,am33xx-eqep" }, + { } +}; + +// Register our compatibilities for device trees +MODULE_DEVICE_TABLE(of, eqep_of_match); + +// Create an instance of the eQEP driver +static int eqep_probe(struct platform_device *pdev) +{ + struct resource *r; + struct clk *clk; + struct eqep_chip *eqep; + struct pinctrl *pinctrl; + int ret; + u64 period; + u16 status; + u32 value; + + // Select any default pins possible provided through the device tree + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + { + dev_warn(&pdev->dev, "unable to select pin group\n"); + } + + // Allocate a eqep_driver object + eqep = devm_kzalloc(&pdev->dev, sizeof(struct eqep_chip), GFP_KERNEL); + if (!eqep) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + // Get a handle to the system clock object + clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + // Get the frequency of the system clock + eqep->clk_rate = clk_get_rate(clk); + if (!eqep->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + // Get a resource containing the IRQ for this eQEP controller + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!r)) { + dev_err(&pdev->dev, "Invalid IRQ resource\n"); + return -ENODEV; + } + + // Store the irq + eqep->irq = r->start; + + // Get a resource containing the requested (from DT) memory address and range of eQEP controller + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + // Remap the eQEP controller memory into our own memory space + eqep->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(eqep->mmio_base)) + return PTR_ERR(eqep->mmio_base); + + // Store the platform device in our eQEP data structure for later usage + eqep->pdev = pdev; + + // Subscribe to the eQEP interrupt + if (request_irq(eqep->irq, eqep_irq_handler, IRQF_IRQPOLL, "eqep_interrupt", pdev)) + { + dev_err(&pdev->dev, "unable to request irq for eQEP\n"); + return -ENODEV; + } + + // Register controls to sysfs + if (sysfs_create_group(&pdev->dev.kobj, &eqep_device_attr_group)) + { + dev_err(&pdev->dev, "sysfs creation failed\n"); + return -EINVAL; + } + + // Read decoder control settings + status = readw(eqep->mmio_base + QDECCTL); + + // Quadrature mode or direction mode + if(of_property_read_u32(pdev->dev.of_node, "count_mode", &value)) + status = status & ~QSRC1 & ~QSRC0; + else + status = ((value) ? status | QSRC0 : status & ~QSRC0) & ~QSRC1; + + // Should we invert the qa input + if(of_property_read_u32(pdev->dev.of_node, "invert_qa", &value)) + status = status & ~QAP; + else + status = (value) ? status | QAP : status & ~QAP; + + // Should we invert the qb input + if(of_property_read_u32(pdev->dev.of_node, "invert_qb", &value)) + status = status & ~QBP; + else + status = (value) ? status | QBP : status & ~QBP; + + // Should we invert the index input + if(of_property_read_u32(pdev->dev.of_node, "invert_qi", &value)) + status = status & ~QIP; + else + status = (value) ? status | QIP : status & ~QIP; + + // Should we invert the strobe input + if(of_property_read_u32(pdev->dev.of_node, "invert_qs", &value)) + status = status & ~QSP; + else + status = (value) ? status | QSP : status & ~QSP; + + // Should we swap the cha and chb inputs + if(of_property_read_u32(pdev->dev.of_node, "swap_inputs", &value)) + status = status & ~SWAP; + else + status = (value) ? status | SWAP : status & ~SWAP; + + // Write the decoder control settings back to the control register + writew(status, eqep->mmio_base + QDECCTL); + + // Initialize the position counter to zero + writel(0, eqep->mmio_base + QPOSINIT); + + // This is pretty ingenious if I do say so myself. The eQEP subsystem has a register + // that defined the maximum value of the encoder as an unsigned. If the counter is zero + // and decrements again, it is set to QPOSMAX. If you cast -1 (signed int) to + // to an unsigned, you will notice that -1 == UINT_MAX. So when the counter is set to this + // maximum position, when read into a signed int, it will equal -1. Two's complement for + // the WIN!! + writel(-1, eqep->mmio_base + QPOSMAX); + + // Enable some interrupts + status = readw(eqep->mmio_base + QEINT); + status = status | UTOF; + // UTOF - Unit Time Period interrupt. This is triggered when the unit timer period expires + // + writew(status, eqep->mmio_base + QEINT); + + // Calculate the timer ticks per second + period = 1000000000; + period = period * eqep->clk_rate; + do_div(period, NSEC_PER_SEC); + + // Set this period into the unit timer period register + writel(period & 0x00000000FFFFFFFF, eqep->mmio_base + QUPRD); + + // Enable the eQEP with basic position counting turned on + status = readw(eqep->mmio_base + QEPCTL); + status = status | PHEN | IEL0 | SWI | UTE | QCLM; + // PHEN - Quadrature position counter enable bit + // IEL0 - Latch QPOSILAT on index signal. This can be rising or falling, IEL[1:0] = 0 is reserved + // SWI - Software initialization of position count register. Basic set QPOSCNT <= QPOSINIT + // UTE - unit timer enable + // QCLM - latch QPOSLAT to QPOSCNT upon unit timer overflow + writew(status, eqep->mmio_base + QEPCTL); + + // We default to absolute mode + eqep->mode = TIEQEP_MODE_ABSOLUTE; + + // Enable the power management runtime + pm_runtime_enable(&pdev->dev); + + // Increment the device usage count and run pm_runtime_resume() + pm_runtime_get_sync(&pdev->dev); + + // Enable the clock to the eQEP unit + status = pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EQEPCLK_EN); + + // If we failed to enable the clocks, fail out + if (!(status & PWMSS_EQEPCLK_EN_ACK)) + { + dev_err(&pdev->dev, "PWMSS config space clock enable failed\n"); + ret = -EINVAL; + goto pwmss_clk_failure; + } + + // Initialize the notify work struture + INIT_WORK(&eqep->notify_work, notify_handler); + + // Decrement the device usage count (twice) and run pm_runtime_idle() if zero + pm_runtime_put_sync(&pdev->dev); + + // Set the platform driver data to the data object we've been creating for the eQEP unit + platform_set_drvdata(pdev, eqep); + + // Success! + //printk(KERN_INFO "EQEP irq = %d, system clock = %u\n", eqep->irq, eqep->clk_rate); + return 0; + + // If a failure occurred, stop the runtime power management +pwmss_clk_failure: + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return ret; +} + +// Remove an instance of the eQEP driver +static int eqep_remove(struct platform_device *pdev) +{ + // Get the eQEP driver data from the platform device structure + struct eqep_chip *eqep = platform_get_drvdata(pdev); + + // Cancel work + cancel_work_sync(&eqep->notify_work); + + // Unmap from sysfs + sysfs_remove_group(&pdev->dev.kobj, &eqep_device_attr_group); + + // Release important assets + free_irq(eqep->irq, pdev); + + // Increment the device usage count and run pm_runtime_resume() + pm_runtime_get_sync(&pdev->dev); + + // Disable the eQEP clock + pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EQEPCLK_STOP_REQ); + + // Decrement the device usage count (twice) and run pm_runtime_idle() if zero + pm_runtime_put_sync(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); + + // Disable the runtime power management of this device + pm_runtime_disable(&pdev->dev); + + // Return success + return 0; +} + +// Power management suspend device +static int eqep_suspend(struct device *dev) +{ + // Get the eqep driver information + struct eqep_chip *eqep = dev_get_drvdata(dev); + u16 tmp; + + // Shut down interrupts + eqep->prior_qeint = readw(eqep->mmio_base + QEINT); + tmp = eqep->prior_qeint & ~UTOF; + // UTOF - Unit Time Period interrupt. + writew(tmp, eqep->mmio_base + QEINT); + + // Get the existing state of QEPCTL + eqep->prior_qepctl = readw(eqep->mmio_base + QEPCTL); + + // Disable eQEP controller + writew(eqep->prior_qepctl & ~PHEN, eqep->mmio_base + QEPCTL); + + // Decrement the device usage count and run pm_runtime_idle() if zero + pm_runtime_put_sync(dev); + + // Return success + return 0; +} + +// Power management wake device back up +static int eqep_resume(struct device *dev) +{ + // Get the eqep driver information + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Restore interrupt enabled register + writew(eqep->prior_qeint, eqep->mmio_base + QEINT); + + // Restore prior qep control register + writew(eqep->prior_qepctl, eqep->mmio_base + QEPCTL); + + // Increment the device usage count and run pm_runtime_resume() + pm_runtime_get_sync(dev); + + // Success + return 0; +} + +// create pm functions object +static SIMPLE_DEV_PM_OPS(eqep_pm_ops, eqep_suspend, eqep_resume); + +// Platform driver information +static struct platform_driver eqep_driver = { + .driver = { + .name = "eqep", + .owner = THIS_MODULE, + .pm = &eqep_pm_ops, + .of_match_table = eqep_of_match, + }, + .probe = eqep_probe, + .remove = eqep_remove, +}; + +// Register this platform driver +module_platform_driver(eqep_driver); + +// Module information +MODULE_DESCRIPTION("TI eQEP driver"); +MODULE_AUTHOR("Nathaniel R. Lewis"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index b536b4c..349c5e7 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -116,7 +116,7 @@ do { \ #define CPDMA_TXCP 0x40 #define CPDMA_RXCP 0x60 -#define CPSW_POLL_WEIGHT 64 +#define CPSW_POLL_WEIGHT 16 #define CPSW_MIN_PACKET_SIZE 60 #define CPSW_MAX_PACKET_SIZE (1500 + 14 + 4 + 4) @@ -698,6 +698,7 @@ static void cpsw_tx_handler(void *token, int len, int status) cpts_tx_timestamp(priv->cpts, skb); ndev->stats.tx_packets++; ndev->stats.tx_bytes += len; + netdev_completed_queue(ndev,1,len); dev_kfree_skb_any(skb); } @@ -1325,6 +1326,8 @@ static int cpsw_ndo_open(struct net_device *ndev) cpsw_set_coalesce(ndev, &coal); } + netdev_reset_queue(ndev); + dev_info(priv->dev, "BQL enabled\n"); napi_enable(&priv->napi); cpdma_ctlr_start(priv->dma); cpsw_intr_enable(priv); @@ -1357,6 +1360,7 @@ static int cpsw_ndo_stop(struct net_device *ndev) netif_stop_queue(priv->ndev); napi_disable(&priv->napi); netif_carrier_off(priv->ndev); + netdev_reset_queue(priv->ndev); if (cpsw_common_res_usage_state(priv) <= 1) { cpts_unregister(priv->cpts); @@ -1377,6 +1381,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, { struct cpsw_priv *priv = netdev_priv(ndev); int ret; + int len; ndev->trans_start = jiffies; @@ -1391,9 +1396,11 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; skb_tx_timestamp(skb); - + len = max(skb->len, CPSW_MIN_PACKET_SIZE); + netdev_sent_queue(ndev,len); ret = cpsw_tx_packet_submit(ndev, priv, skb); if (unlikely(ret != 0)) { + netdev_completed_queue(ndev,1,len); cpsw_err(priv, tx_err, "desc submit failed\n"); goto fail; } diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index c00084d..cfbe9a5 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -102,6 +102,10 @@ struct davinci_mdio_data { bool skip_scan; }; +#if IS_ENABLED(CONFIG_OF) +static void davinci_mdio_update_dt_from_phymask(u32 phy_mask); +#endif + static void __davinci_mdio_reset(struct davinci_mdio_data *data) { u32 mdio_in, div, mdio_out_khz, access_time; @@ -158,6 +162,12 @@ static int davinci_mdio_reset(struct mii_bus *bus) /* restrict mdio bus to live phys only */ dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); phy_mask = ~phy_mask; + + #if IS_ENABLED(CONFIG_OF) + if (of_machine_is_compatible("ti,am335x-bone")) + davinci_mdio_update_dt_from_phymask(phy_mask); + #endif + } else { /* desperately scan all phys */ dev_warn(data->dev, "no live phy, scanning all\n"); @@ -318,6 +328,93 @@ static int davinci_mdio_probe_dt(struct mdio_platform_data *data, return 0; } +static void davinci_mdio_update_dt_from_phymask(u32 phy_mask) +{ + int i, len, skip; + u32 addr; + __be32 *old_phy_p, *phy_id_p; + struct property *phy_id_property = NULL; + struct device_node *node_p, *slave_p; + + addr = 0; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if ((phy_mask & (1 << i)) == 0) { + addr = (u32) i; + break; + } + } + + for_each_compatible_node(node_p, NULL, "ti,cpsw") { + for_each_node_by_name(slave_p, "slave") { + +#if IS_ENABLED(CONFIG_OF_OVERLAY) + skip = 1; + // Hack, the overlay fixup "slave" doesn't have phy-mode... + old_phy_p = (__be32 *) of_get_property(slave_p, "phy-mode", &len); + + if (len != (sizeof(__be32 *) * 1)) + { + skip = 0; + } + + if (skip) { +#endif + + old_phy_p = (__be32 *) of_get_property(slave_p, "phy_id", &len); + + if (len != (sizeof(__be32 *) * 2)) + goto err_out; + + if (old_phy_p) { + + phy_id_property = kzalloc(sizeof(*phy_id_property), GFP_KERNEL); + + if (! phy_id_property) + goto err_out; + + phy_id_property->length = len; + phy_id_property->name = kstrdup("phy_id", GFP_KERNEL); + phy_id_property->value = kzalloc(len, GFP_KERNEL); + + if (! phy_id_property->name) + goto err_out; + + if (! phy_id_property->value) + goto err_out; + + memcpy(phy_id_property->value, old_phy_p, len); + + phy_id_p = (__be32 *) phy_id_property->value + 1; + + *phy_id_p = cpu_to_be32(addr); + + of_update_property(slave_p, phy_id_property); + pr_info("davinci_mdio: dt: updated phy_id[%d] from phy_mask[%x]\n", addr, phy_mask); + + ++addr; + } +#if IS_ENABLED(CONFIG_OF_OVERLAY) + } +#endif + } + } + + return; + +err_out: + + if (phy_id_property) { + if (phy_id_property->name) + kfree(phy_id_property->name); + + if (phy_id_property->value) + kfree(phy_id_property->value); + + if (phy_id_property) + kfree(phy_id_property); + } +} #endif static int davinci_mdio_probe(struct platform_device *pdev) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 16604bd..a63ab2e 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -277,6 +277,7 @@ source "drivers/net/wireless/libertas/Kconfig" source "drivers/net/wireless/orinoco/Kconfig" source "drivers/net/wireless/p54/Kconfig" source "drivers/net/wireless/rt2x00/Kconfig" +source "drivers/net/wireless/mediatek/Kconfig" source "drivers/net/wireless/rtlwifi/Kconfig" source "drivers/net/wireless/ti/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 0c88916..6b9e729 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -45,6 +45,8 @@ obj-$(CONFIG_IWLWIFI) += iwlwifi/ obj-$(CONFIG_IWLEGACY) += iwlegacy/ obj-$(CONFIG_RT2X00) += rt2x00/ +obj-$(CONFIG_WL_MEDIATEK) += mediatek/ + obj-$(CONFIG_P54_COMMON) += p54/ obj-$(CONFIG_ATH_CARDS) += ath/ diff --git a/drivers/net/wireless/mediatek/Kconfig b/drivers/net/wireless/mediatek/Kconfig new file mode 100644 index 0000000..cba300c --- /dev/null +++ b/drivers/net/wireless/mediatek/Kconfig @@ -0,0 +1,10 @@ +menuconfig WL_MEDIATEK + bool "Mediatek Wireless LAN support" + ---help--- + Enable community drivers for MediaTek WiFi devices. + Those drivers make use of the Linux mac80211 stack. + + +if WL_MEDIATEK +source "drivers/net/wireless/mediatek/mt7601u/Kconfig" +endif # WL_MEDIATEK diff --git a/drivers/net/wireless/mediatek/Makefile b/drivers/net/wireless/mediatek/Makefile new file mode 100644 index 0000000..9d5f182 --- /dev/null +++ b/drivers/net/wireless/mediatek/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MT7601U) += mt7601u/ diff --git a/drivers/net/wireless/mediatek/mt7601u/Kconfig b/drivers/net/wireless/mediatek/mt7601u/Kconfig new file mode 100644 index 0000000..f46bed9 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/Kconfig @@ -0,0 +1,6 @@ +config MT7601U + tristate "MediaTek MT7601U (USB) support" + depends on MAC80211 + depends on USB + ---help--- + This adds support for MT7601U-based wireless USB dongles. diff --git a/drivers/net/wireless/mediatek/mt7601u/Makefile b/drivers/net/wireless/mediatek/mt7601u/Makefile new file mode 100644 index 0000000..ea9ed8a --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/Makefile @@ -0,0 +1,9 @@ +ccflags-y += -D__CHECK_ENDIAN__ + +obj-$(CONFIG_MT7601U) += mt7601u.o + +mt7601u-objs = \ + usb.o init.o main.o mcu.o trace.o dma.o core.o eeprom.o phy.o \ + mac.o util.o debugfs.o tx.o + +CFLAGS_trace.o := -I$(src) diff --git a/drivers/net/wireless/mediatek/mt7601u/core.c b/drivers/net/wireless/mediatek/mt7601u/core.c new file mode 100644 index 0000000..0aabd79 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/core.c @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" + +int mt7601u_wait_asic_ready(struct mt7601u_dev *dev) +{ + int i = 100; + u32 val; + + do { + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return -EIO; + + val = mt7601u_rr(dev, MT_MAC_CSR0); + if (val && ~val) + return 0; + + udelay(10); + } while (i--); + + return -EIO; +} + +bool mt76_poll(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val, + int timeout) +{ + u32 cur; + + timeout /= 10; + do { + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return false; + + cur = mt7601u_rr(dev, offset) & mask; + if (cur == val) + return true; + + udelay(10); + } while (timeout-- > 0); + + dev_err(dev->dev, "Error: Time out with reg %08x\n", offset); + + return false; +} + +bool mt76_poll_msec(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val, + int timeout) +{ + u32 cur; + + timeout /= 10; + do { + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return false; + + cur = mt7601u_rr(dev, offset) & mask; + if (cur == val) + return true; + + msleep(10); + } while (timeout-- > 0); + + dev_err(dev->dev, "Error: Time out with reg %08x\n", offset); + + return false; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/debugfs.c b/drivers/net/wireless/mediatek/mt7601u/debugfs.c new file mode 100644 index 0000000..fc00847 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/debugfs.c @@ -0,0 +1,172 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#include "mt7601u.h" +#include "eeprom.h" + +static int +mt76_reg_set(void *data, u64 val) +{ + struct mt7601u_dev *dev = data; + + mt76_wr(dev, dev->debugfs_reg, val); + return 0; +} + +static int +mt76_reg_get(void *data, u64 *val) +{ + struct mt7601u_dev *dev = data; + + *val = mt76_rr(dev, dev->debugfs_reg); + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_regval, mt76_reg_get, mt76_reg_set, "0x%08llx\n"); + +static int +mt7601u_ampdu_stat_read(struct seq_file *file, void *data) +{ + struct mt7601u_dev *dev = file->private; + int i, j; + +#define stat_printf(grp, off, name) \ + seq_printf(file, #name ":\t%llu\n", dev->stats.grp[off]) + + stat_printf(rx_stat, 0, rx_crc_err); + stat_printf(rx_stat, 1, rx_phy_err); + stat_printf(rx_stat, 2, rx_false_cca); + stat_printf(rx_stat, 3, rx_plcp_err); + stat_printf(rx_stat, 4, rx_fifo_overflow); + stat_printf(rx_stat, 5, rx_duplicate); + + stat_printf(tx_stat, 0, tx_fail_cnt); + stat_printf(tx_stat, 1, tx_bcn_cnt); + stat_printf(tx_stat, 2, tx_success); + stat_printf(tx_stat, 3, tx_retransmit); + stat_printf(tx_stat, 4, tx_zero_len); + stat_printf(tx_stat, 5, tx_underflow); + + stat_printf(aggr_stat, 0, non_aggr_tx); + stat_printf(aggr_stat, 1, aggr_tx); + + stat_printf(zero_len_del, 0, tx_zero_len_del); + stat_printf(zero_len_del, 1, rx_zero_len_del); +#undef stat_printf + + seq_puts(file, "Aggregations stats:\n"); + for (i = 0; i < 4; i++) { + for (j = 0; j < 8; j++) + seq_printf(file, "%08llx ", + dev->stats.aggr_n[i * 8 + j]); + seq_putc(file, '\n'); + } + + seq_printf(file, "recent average AMPDU len: %d\n", + atomic_read(&dev->avg_ampdu_len)); + + return 0; +} + +static int +mt7601u_ampdu_stat_open(struct inode *inode, struct file *f) +{ + return single_open(f, mt7601u_ampdu_stat_read, inode->i_private); +} + +static const struct file_operations fops_ampdu_stat = { + .open = mt7601u_ampdu_stat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int +mt7601u_eeprom_param_read(struct seq_file *file, void *data) +{ + struct mt7601u_dev *dev = file->private; + struct mt7601u_rate_power *rp = &dev->ee->power_rate_table; + struct tssi_data *td = &dev->ee->tssi_data; + int i; + + seq_printf(file, "RF freq offset: %hhx\n", dev->ee->rf_freq_off); + seq_printf(file, "RSSI offset: %hhx %hhx\n", + dev->ee->rssi_offset[0], dev->ee->rssi_offset[1]); + seq_printf(file, "Reference temp: %hhx\n", dev->ee->ref_temp); + seq_printf(file, "LNA gain: %hhx\n", dev->ee->lna_gain); + seq_printf(file, "Reg channels: %hhu-%hhu\n", dev->ee->reg.start, + dev->ee->reg.start + dev->ee->reg.num - 1); + + seq_puts(file, "Per rate power:\n"); + for (i = 0; i < 2; i++) + seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", + rp->cck[i].raw, rp->cck[i].bw20, rp->cck[i].bw40); + for (i = 0; i < 4; i++) + seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", + rp->ofdm[i].raw, rp->ofdm[i].bw20, rp->ofdm[i].bw40); + for (i = 0; i < 4; i++) + seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", + rp->ht[i].raw, rp->ht[i].bw20, rp->ht[i].bw40); + + seq_puts(file, "Per channel power:\n"); + for (i = 0; i < 7; i++) + seq_printf(file, "\t tx_power ch%u:%02hhx ch%u:%02hhx\n", + i * 2 + 1, dev->ee->chan_pwr[i * 2], + i * 2 + 2, dev->ee->chan_pwr[i * 2 + 1]); + + if (!dev->ee->tssi_enabled) + return 0; + + seq_puts(file, "TSSI:\n"); + seq_printf(file, "\t slope:%02hhx\n", td->slope); + seq_printf(file, "\t offset=%02hhx %02hhx %02hhx\n", + td->offset[0], td->offset[1], td->offset[2]); + seq_printf(file, "\t delta_off:%08x\n", td->tx0_delta_offset); + + return 0; +} + +static int +mt7601u_eeprom_param_open(struct inode *inode, struct file *f) +{ + return single_open(f, mt7601u_eeprom_param_read, inode->i_private); +} + +static const struct file_operations fops_eeprom_param = { + .open = mt7601u_eeprom_param_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void mt7601u_init_debugfs(struct mt7601u_dev *dev) +{ + struct dentry *dir; + + dir = debugfs_create_dir("mt7601u", dev->hw->wiphy->debugfsdir); + if (!dir) + return; + + debugfs_create_u8("temperature", S_IRUSR, dir, &dev->raw_temp); + debugfs_create_u32("temp_mode", S_IRUSR, dir, &dev->temp_mode); + + debugfs_create_u32("regidx", S_IRUSR | S_IWUSR, dir, &dev->debugfs_reg); + debugfs_create_file("regval", S_IRUSR | S_IWUSR, dir, dev, + &fops_regval); + debugfs_create_file("ampdu_stat", S_IRUSR, dir, dev, &fops_ampdu_stat); + debugfs_create_file("eeprom_param", S_IRUSR, dir, dev, + &fops_eeprom_param); +} diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c new file mode 100644 index 0000000..7217da4 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/dma.c @@ -0,0 +1,505 @@ +/* + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "dma.h" +#include "usb.h" +#include "trace.h" + +static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev, + struct mt7601u_dma_buf_rx *e, gfp_t gfp); + +static unsigned int ieee80211_get_hdrlen_from_buf(const u8 *data, unsigned len) +{ + const struct ieee80211_hdr *hdr = (const struct ieee80211_hdr *)data; + unsigned int hdrlen; + + if (unlikely(len < 10)) + return 0; + hdrlen = ieee80211_hdrlen(hdr->frame_control); + if (unlikely(hdrlen > len)) + return 0; + return hdrlen; +} + +static struct sk_buff * +mt7601u_rx_skb_from_seg(struct mt7601u_dev *dev, struct mt7601u_rxwi *rxwi, + void *data, u32 seg_len, u32 truesize, struct page *p) +{ + struct sk_buff *skb; + u32 true_len, hdr_len = 0, copy, frag; + + skb = alloc_skb(p ? 128 : seg_len, GFP_ATOMIC); + if (!skb) + return NULL; + + true_len = mt76_mac_process_rx(dev, skb, data, rxwi); + if (!true_len || true_len > seg_len) + goto bad_frame; + + hdr_len = ieee80211_get_hdrlen_from_buf(data, true_len); + if (!hdr_len) + goto bad_frame; + + if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_L2PAD)) { + memcpy(skb_put(skb, hdr_len), data, hdr_len); + + data += hdr_len + 2; + true_len -= hdr_len; + hdr_len = 0; + } + + /* If not doing paged RX allocated skb will always have enough space */ + copy = (true_len <= skb_tailroom(skb)) ? true_len : hdr_len + 8; + frag = true_len - copy; + + memcpy(skb_put(skb, copy), data, copy); + data += copy; + + if (frag) { + skb_add_rx_frag(skb, 0, p, data - page_address(p), + frag, truesize); + get_page(p); + } + + return skb; + +bad_frame: + dev_err_ratelimited(dev->dev, "Error: incorrect frame len:%u hdr:%u\n", + true_len, hdr_len); + dev_kfree_skb(skb); + return NULL; +} + +static void mt7601u_rx_process_seg(struct mt7601u_dev *dev, u8 *data, + u32 seg_len, struct page *p) +{ + struct sk_buff *skb; + struct mt7601u_rxwi *rxwi; + u32 fce_info, truesize = seg_len; + + /* DMA_INFO field at the beginning of the segment contains only some of + * the information, we need to read the FCE descriptor from the end. + */ + fce_info = get_unaligned_le32(data + seg_len - MT_FCE_INFO_LEN); + seg_len -= MT_FCE_INFO_LEN; + + data += MT_DMA_HDR_LEN; + seg_len -= MT_DMA_HDR_LEN; + + rxwi = (struct mt7601u_rxwi *) data; + data += sizeof(struct mt7601u_rxwi); + seg_len -= sizeof(struct mt7601u_rxwi); + + if (unlikely(rxwi->zero[0] || rxwi->zero[1] || rxwi->zero[2])) + dev_err_once(dev->dev, "Error: RXWI zero fields are set\n"); + if (unlikely(MT76_GET(MT_RXD_INFO_TYPE, fce_info))) + dev_err_once(dev->dev, "Error: RX path seen a non-pkt urb\n"); + + trace_mt_rx(dev, rxwi, fce_info); + + skb = mt7601u_rx_skb_from_seg(dev, rxwi, data, seg_len, truesize, p); + if (!skb) + return; + + ieee80211_rx_ni(dev->hw, skb); +} + +static u16 mt7601u_rx_next_seg_len(u8 *data, u32 data_len) +{ + u32 min_seg_len = MT_DMA_HDR_LEN + MT_RX_INFO_LEN + + sizeof(struct mt7601u_rxwi) + MT_FCE_INFO_LEN; + u16 dma_len = get_unaligned_le16(data); + + if (data_len < min_seg_len || + WARN_ON(!dma_len) || + WARN_ON(dma_len + MT_DMA_HDRS > data_len) || + WARN_ON(dma_len & 0x3)) + return 0; + + return MT_DMA_HDRS + dma_len; +} + +static void +mt7601u_rx_process_entry(struct mt7601u_dev *dev, struct mt7601u_dma_buf_rx *e) +{ + u32 seg_len, data_len = e->urb->actual_length; + u8 *data = page_address(e->p); + struct page *new_p = NULL; + int cnt = 0; + + if (!test_bit(MT7601U_STATE_INITIALIZED, &dev->state)) + return; + + /* Copy if there is very little data in the buffer. */ + if (data_len > 512) + new_p = dev_alloc_pages(MT_RX_ORDER); + + while ((seg_len = mt7601u_rx_next_seg_len(data, data_len))) { + mt7601u_rx_process_seg(dev, data, seg_len, new_p ? e->p : NULL); + + data_len -= seg_len; + data += seg_len; + cnt++; + } + + if (cnt > 1) + trace_mt_rx_dma_aggr(dev, cnt, !!new_p); + + if (new_p) { + /* we have one extra ref from the allocator */ + __free_pages(e->p, MT_RX_ORDER); + + e->p = new_p; + } +} + +static struct mt7601u_dma_buf_rx * +mt7601u_rx_get_pending_entry(struct mt7601u_dev *dev) +{ + struct mt7601u_rx_queue *q = &dev->rx_q; + struct mt7601u_dma_buf_rx *buf = NULL; + unsigned long flags; + + spin_lock_irqsave(&dev->rx_lock, flags); + + if (!q->pending) + goto out; + + buf = &q->e[q->start]; + q->pending--; + q->start = (q->start + 1) % q->entries; +out: + spin_unlock_irqrestore(&dev->rx_lock, flags); + + return buf; +} + +static void mt7601u_complete_rx(struct urb *urb) +{ + struct mt7601u_dev *dev = urb->context; + struct mt7601u_rx_queue *q = &dev->rx_q; + unsigned long flags; + + spin_lock_irqsave(&dev->rx_lock, flags); + + if (mt7601u_urb_has_error(urb)) + dev_err(dev->dev, "Error: RX urb failed:%d\n", urb->status); + if (WARN_ONCE(q->e[q->end].urb != urb, "RX urb mismatch")) + goto out; + + q->end = (q->end + 1) % q->entries; + q->pending++; + tasklet_schedule(&dev->rx_tasklet); +out: + spin_unlock_irqrestore(&dev->rx_lock, flags); +} + +static void mt7601u_rx_tasklet(unsigned long data) +{ + struct mt7601u_dev *dev = (struct mt7601u_dev *) data; + struct mt7601u_dma_buf_rx *e; + + while ((e = mt7601u_rx_get_pending_entry(dev))) { + if (e->urb->status) + continue; + + mt7601u_rx_process_entry(dev, e); + mt7601u_submit_rx_buf(dev, e, GFP_ATOMIC); + } +} + +static void mt7601u_complete_tx(struct urb *urb) +{ + struct mt7601u_tx_queue *q = urb->context; + struct mt7601u_dev *dev = q->dev; + struct sk_buff *skb; + unsigned long flags; + + spin_lock_irqsave(&dev->tx_lock, flags); + + if (mt7601u_urb_has_error(urb)) + dev_err(dev->dev, "Error: TX urb failed:%d\n", urb->status); + if (WARN_ONCE(q->e[q->start].urb != urb, "TX urb mismatch")) + goto out; + + skb = q->e[q->start].skb; + trace_mt_tx_dma_done(dev, skb); + + mt7601u_tx_status(dev, skb); + + if (q->used == q->entries - q->entries / 8) + ieee80211_wake_queue(dev->hw, skb_get_queue_mapping(skb)); + + q->start = (q->start + 1) % q->entries; + q->used--; + + if (urb->status) + goto out; + + set_bit(MT7601U_STATE_MORE_STATS, &dev->state); + if (!test_and_set_bit(MT7601U_STATE_READING_STATS, &dev->state)) + queue_delayed_work(dev->stat_wq, &dev->stat_work, + msecs_to_jiffies(10)); +out: + spin_unlock_irqrestore(&dev->tx_lock, flags); +} + +static int mt7601u_dma_submit_tx(struct mt7601u_dev *dev, + struct sk_buff *skb, u8 ep) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + unsigned snd_pipe = usb_sndbulkpipe(usb_dev, dev->out_eps[ep]); + struct mt7601u_dma_buf_tx *e; + struct mt7601u_tx_queue *q = &dev->tx_q[ep]; + unsigned long flags; + int ret; + + spin_lock_irqsave(&dev->tx_lock, flags); + + if (WARN_ON(q->entries <= q->used)) { + ret = -ENOSPC; + goto out; + } + + e = &q->e[q->end]; + e->skb = skb; + usb_fill_bulk_urb(e->urb, usb_dev, snd_pipe, skb->data, skb->len, + mt7601u_complete_tx, q); + ret = usb_submit_urb(e->urb, GFP_ATOMIC); + if (ret) { + /* Special-handle ENODEV from TX urb submission because it will + * often be the first ENODEV we see after device is removed. + */ + if (ret == -ENODEV) + set_bit(MT7601U_STATE_REMOVED, &dev->state); + else + dev_err(dev->dev, "Error: TX urb submit failed:%d\n", + ret); + goto out; + } + + q->end = (q->end + 1) % q->entries; + q->used++; + + if (q->used >= q->entries) + ieee80211_stop_queue(dev->hw, skb_get_queue_mapping(skb)); +out: + spin_unlock_irqrestore(&dev->tx_lock, flags); + + return ret; +} + +/* Map hardware Q to USB endpoint number */ +static u8 q2ep(u8 qid) +{ + /* TODO: take management packets to queue 5 */ + return qid + 1; +} + +/* Map USB endpoint number to Q id in the DMA engine */ +static enum mt76_qsel ep2dmaq(u8 ep) +{ + if (ep == 5) + return MT_QSEL_MGMT; + return MT_QSEL_EDCA; +} + +int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb, + struct mt76_wcid *wcid, int hw_q) +{ + u8 ep = q2ep(hw_q); + u32 dma_flags; + int ret; + + dma_flags = MT_TXD_PKT_INFO_80211; + if (wcid->hw_key_idx == 0xff) + dma_flags |= MT_TXD_PKT_INFO_WIV; + + ret = mt7601u_dma_skb_wrap_pkt(skb, ep2dmaq(ep), dma_flags); + if (ret) + return ret; + + ret = mt7601u_dma_submit_tx(dev, skb, ep); + if (ret) { + ieee80211_free_txskb(dev->hw, skb); + return ret; + } + + return 0; +} + +static void mt7601u_kill_rx(struct mt7601u_dev *dev) +{ + int i; + unsigned long flags; + + spin_lock_irqsave(&dev->rx_lock, flags); + + for (i = 0; i < dev->rx_q.entries; i++) { + int next = dev->rx_q.end; + + spin_unlock_irqrestore(&dev->rx_lock, flags); + usb_poison_urb(dev->rx_q.e[next].urb); + spin_lock_irqsave(&dev->rx_lock, flags); + } + + spin_unlock_irqrestore(&dev->rx_lock, flags); +} + +static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev, + struct mt7601u_dma_buf_rx *e, gfp_t gfp) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + u8 *buf = page_address(e->p); + unsigned pipe; + int ret; + + pipe = usb_rcvbulkpipe(usb_dev, dev->in_eps[MT_EP_IN_PKT_RX]); + + usb_fill_bulk_urb(e->urb, usb_dev, pipe, buf, MT_RX_URB_SIZE, + mt7601u_complete_rx, dev); + + trace_mt_submit_urb(dev, e->urb); + ret = usb_submit_urb(e->urb, gfp); + if (ret) + dev_err(dev->dev, "Error: submit RX URB failed:%d\n", ret); + + return ret; +} + +static int mt7601u_submit_rx(struct mt7601u_dev *dev) +{ + int i, ret; + + for (i = 0; i < dev->rx_q.entries; i++) { + ret = mt7601u_submit_rx_buf(dev, &dev->rx_q.e[i], GFP_KERNEL); + if (ret) + return ret; + } + + return 0; +} + +static void mt7601u_free_rx(struct mt7601u_dev *dev) +{ + int i; + + for (i = 0; i < dev->rx_q.entries; i++) { + __free_pages(dev->rx_q.e[i].p, MT_RX_ORDER); + usb_free_urb(dev->rx_q.e[i].urb); + } +} + +static int mt7601u_alloc_rx(struct mt7601u_dev *dev) +{ + int i; + + memset(&dev->rx_q, 0, sizeof(dev->rx_q)); + dev->rx_q.dev = dev; + dev->rx_q.entries = N_RX_ENTRIES; + + for (i = 0; i < N_RX_ENTRIES; i++) { + dev->rx_q.e[i].urb = usb_alloc_urb(0, GFP_KERNEL); + dev->rx_q.e[i].p = dev_alloc_pages(MT_RX_ORDER); + + if (!dev->rx_q.e[i].urb || !dev->rx_q.e[i].p) + return -ENOMEM; + } + + return 0; +} + +static void mt7601u_free_tx_queue(struct mt7601u_tx_queue *q) +{ + int i; + + WARN_ON(q->used); + + for (i = 0; i < q->entries; i++) { + usb_poison_urb(q->e[i].urb); + usb_free_urb(q->e[i].urb); + } +} + +static void mt7601u_free_tx(struct mt7601u_dev *dev) +{ + int i; + + for (i = 0; i < __MT_EP_OUT_MAX; i++) + mt7601u_free_tx_queue(&dev->tx_q[i]); +} + +static int mt7601u_alloc_tx_queue(struct mt7601u_dev *dev, + struct mt7601u_tx_queue *q) +{ + int i; + + q->dev = dev; + q->entries = N_TX_ENTRIES; + + for (i = 0; i < N_TX_ENTRIES; i++) { + q->e[i].urb = usb_alloc_urb(0, GFP_KERNEL); + if (!q->e[i].urb) + return -ENOMEM; + } + + return 0; +} + +static int mt7601u_alloc_tx(struct mt7601u_dev *dev) +{ + int i; + + dev->tx_q = devm_kcalloc(dev->dev, __MT_EP_OUT_MAX, + sizeof(*dev->tx_q), GFP_KERNEL); + + for (i = 0; i < __MT_EP_OUT_MAX; i++) + if (mt7601u_alloc_tx_queue(dev, &dev->tx_q[i])) + return -ENOMEM; + + return 0; +} + +int mt7601u_dma_init(struct mt7601u_dev *dev) +{ + int ret = -ENOMEM; + + tasklet_init(&dev->rx_tasklet, mt7601u_rx_tasklet, (unsigned long) dev); + + ret = mt7601u_alloc_tx(dev); + if (ret) + goto err; + ret = mt7601u_alloc_rx(dev); + if (ret) + goto err; + + ret = mt7601u_submit_rx(dev); + if (ret) + goto err; + + return 0; +err: + mt7601u_dma_cleanup(dev); + return ret; +} + +void mt7601u_dma_cleanup(struct mt7601u_dev *dev) +{ + mt7601u_kill_rx(dev); + + tasklet_kill(&dev->rx_tasklet); + + mt7601u_free_rx(dev); + mt7601u_free_tx(dev); +} diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.h b/drivers/net/wireless/mediatek/mt7601u/dma.h new file mode 100644 index 0000000..978e8a9 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/dma.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_DMA_H +#define __MT7601U_DMA_H + +#include +#include + +#include "util.h" + +#define MT_DMA_HDR_LEN 4 +#define MT_RX_INFO_LEN 4 +#define MT_FCE_INFO_LEN 4 +#define MT_DMA_HDRS (MT_DMA_HDR_LEN + MT_RX_INFO_LEN) + +/* Common Tx DMA descriptor fields */ +#define MT_TXD_INFO_LEN GENMASK(15, 0) +#define MT_TXD_INFO_D_PORT GENMASK(29, 27) +#define MT_TXD_INFO_TYPE GENMASK(31, 30) + +enum mt76_msg_port { + WLAN_PORT, + CPU_RX_PORT, + CPU_TX_PORT, + HOST_PORT, + VIRTUAL_CPU_RX_PORT, + VIRTUAL_CPU_TX_PORT, + DISCARD, +}; + +enum mt76_info_type { + DMA_PACKET, + DMA_COMMAND, +}; + +/* Tx DMA packet specific flags */ +#define MT_TXD_PKT_INFO_NEXT_VLD BIT(16) +#define MT_TXD_PKT_INFO_TX_BURST BIT(17) +#define MT_TXD_PKT_INFO_80211 BIT(19) +#define MT_TXD_PKT_INFO_TSO BIT(20) +#define MT_TXD_PKT_INFO_CSO BIT(21) +#define MT_TXD_PKT_INFO_WIV BIT(24) +#define MT_TXD_PKT_INFO_QSEL GENMASK(26, 25) + +enum mt76_qsel { + MT_QSEL_MGMT, + MT_QSEL_HCCA, + MT_QSEL_EDCA, + MT_QSEL_EDCA_2, +}; + +/* Tx DMA MCU command specific flags */ +#define MT_TXD_CMD_INFO_SEQ GENMASK(19, 16) +#define MT_TXD_CMD_INFO_TYPE GENMASK(26, 20) + +static inline int mt7601u_dma_skb_wrap(struct sk_buff *skb, + enum mt76_msg_port d_port, + enum mt76_info_type type, u32 flags) +{ + u32 info; + + /* Buffer layout: + * | 4B | xfer len | pad | 4B | + * | TXINFO | pkt/cmd | zero pad to 4B | zero | + * + * length field of TXINFO should be set to 'xfer len'. + */ + + info = flags | + MT76_SET(MT_TXD_INFO_LEN, round_up(skb->len, 4)) | + MT76_SET(MT_TXD_INFO_D_PORT, d_port) | + MT76_SET(MT_TXD_INFO_TYPE, type); + + put_unaligned_le32(info, skb_push(skb, sizeof(info))); + return skb_put_padto(skb, round_up(skb->len, 4) + 4); +} + +static inline int +mt7601u_dma_skb_wrap_pkt(struct sk_buff *skb, enum mt76_qsel qsel, u32 flags) +{ + flags |= MT76_SET(MT_TXD_PKT_INFO_QSEL, qsel); + return mt7601u_dma_skb_wrap(skb, WLAN_PORT, DMA_PACKET, flags); +} + +/* Common Rx DMA descriptor fields */ +#define MT_RXD_INFO_LEN GENMASK(13, 0) +#define MT_RXD_INFO_PCIE_INTR BIT(24) +#define MT_RXD_INFO_QSEL GENMASK(26, 25) +#define MT_RXD_INFO_PORT GENMASK(29, 27) +#define MT_RXD_INFO_TYPE GENMASK(31, 30) + +/* Rx DMA packet specific flags */ +#define MT_RXD_PKT_INFO_UDP_ERR BIT(16) +#define MT_RXD_PKT_INFO_TCP_ERR BIT(17) +#define MT_RXD_PKT_INFO_IP_ERR BIT(18) +#define MT_RXD_PKT_INFO_PKT_80211 BIT(19) +#define MT_RXD_PKT_INFO_L3L4_DONE BIT(20) +#define MT_RXD_PKT_INFO_MAC_LEN GENMASK(23, 21) + +/* Rx DMA MCU command specific flags */ +#define MT_RXD_CMD_INFO_SELF_GEN BIT(15) +#define MT_RXD_CMD_INFO_CMD_SEQ GENMASK(19, 16) +#define MT_RXD_CMD_INFO_EVT_TYPE GENMASK(23, 20) + +enum mt76_evt_type { + CMD_DONE, + CMD_ERROR, + CMD_RETRY, + EVENT_PWR_RSP, + EVENT_WOW_RSP, + EVENT_CARRIER_DETECT_RSP, + EVENT_DFS_DETECT_RSP, +}; + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.c b/drivers/net/wireless/mediatek/mt7601u/eeprom.c new file mode 100644 index 0000000..8d8ee03 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.c @@ -0,0 +1,418 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include "mt7601u.h" +#include "eeprom.h" + +static bool +field_valid(u8 val) +{ + return val != 0xff; +} + +static s8 +field_validate(u8 val) +{ + if (!field_valid(val)) + return 0; + + return val; +} + +static int +mt7601u_efuse_read(struct mt7601u_dev *dev, u16 addr, u8 *data, + enum mt7601u_eeprom_access_modes mode) +{ + u32 val; + int i; + + val = mt76_rr(dev, MT_EFUSE_CTRL); + val &= ~(MT_EFUSE_CTRL_AIN | + MT_EFUSE_CTRL_MODE); + val |= MT76_SET(MT_EFUSE_CTRL_AIN, addr & ~0xf) | + MT76_SET(MT_EFUSE_CTRL_MODE, mode) | + MT_EFUSE_CTRL_KICK; + mt76_wr(dev, MT_EFUSE_CTRL, val); + + if (!mt76_poll(dev, MT_EFUSE_CTRL, MT_EFUSE_CTRL_KICK, 0, 1000)) + return -ETIMEDOUT; + + val = mt76_rr(dev, MT_EFUSE_CTRL); + if ((val & MT_EFUSE_CTRL_AOUT) == MT_EFUSE_CTRL_AOUT) { + /* Parts of eeprom not in the usage map (0x80-0xc0,0xf0) + * will not return valid data but it's ok. + */ + memset(data, 0xff, 16); + return 0; + } + + for (i = 0; i < 4; i++) { + val = mt76_rr(dev, MT_EFUSE_DATA(i)); + put_unaligned_le32(val, data + 4 * i); + } + + return 0; +} + +static int +mt7601u_efuse_physical_size_check(struct mt7601u_dev *dev) +{ + const int map_reads = DIV_ROUND_UP(MT_EFUSE_USAGE_MAP_SIZE, 16); + u8 data[map_reads * 16]; + int ret, i; + u32 start = 0, end = 0, cnt_free; + + for (i = 0; i < map_reads; i++) { + ret = mt7601u_efuse_read(dev, MT_EE_USAGE_MAP_START + i * 16, + data + i * 16, MT_EE_PHYSICAL_READ); + if (ret) + return ret; + } + + for (i = 0; i < MT_EFUSE_USAGE_MAP_SIZE; i++) + if (!data[i]) { + if (!start) + start = MT_EE_USAGE_MAP_START + i; + end = MT_EE_USAGE_MAP_START + i; + } + cnt_free = end - start + 1; + + if (MT_EFUSE_USAGE_MAP_SIZE - cnt_free < 5) { + dev_err(dev->dev, "Error: your device needs default EEPROM file and this driver doesn't support it!\n"); + return -EINVAL; + } + + return 0; +} + +static bool +mt7601u_has_tssi(struct mt7601u_dev *dev, u8 *eeprom) +{ + u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1); + + return ~nic_conf1 && (nic_conf1 & MT_EE_NIC_CONF_1_TX_ALC_EN); +} + +static void +mt7601u_set_chip_cap(struct mt7601u_dev *dev, u8 *eeprom) +{ + u16 nic_conf0 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_0); + u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1); + + if (!field_valid(nic_conf1 & 0xff)) + nic_conf1 &= 0xff00; + + dev->ee->tssi_enabled = mt7601u_has_tssi(dev, eeprom) && + !(nic_conf1 & MT_EE_NIC_CONF_1_TEMP_TX_ALC); + + if (nic_conf1 & MT_EE_NIC_CONF_1_HW_RF_CTRL) + dev_err(dev->dev, + "Error: this driver does not support HW RF ctrl\n"); + + if (!field_valid(nic_conf0 >> 8)) + return; + + if (MT76_GET(MT_EE_NIC_CONF_0_RX_PATH, nic_conf0) > 1 || + MT76_GET(MT_EE_NIC_CONF_0_TX_PATH, nic_conf0) > 1) + dev_err(dev->dev, + "Error: device has more than 1 RX/TX stream!\n"); +} + +static int +mt7601u_set_macaddr(struct mt7601u_dev *dev, const u8 *eeprom) +{ + const void *src = eeprom + MT_EE_MAC_ADDR; + + ether_addr_copy(dev->macaddr, src); + + if (!is_valid_ether_addr(dev->macaddr)) { + eth_random_addr(dev->macaddr); + dev_info(dev->dev, + "Invalid MAC address, using random address %pM\n", + dev->macaddr); + } + + mt76_wr(dev, MT_MAC_ADDR_DW0, get_unaligned_le32(dev->macaddr)); + mt76_wr(dev, MT_MAC_ADDR_DW1, get_unaligned_le16(dev->macaddr + 4) | + MT76_SET(MT_MAC_ADDR_DW1_U2ME_MASK, 0xff)); + + return 0; +} + +static void mt7601u_set_channel_target_power(struct mt7601u_dev *dev, + u8 *eeprom, u8 max_pwr) +{ + u8 trgt_pwr = eeprom[MT_EE_TX_TSSI_TARGET_POWER]; + + if (trgt_pwr > max_pwr || !trgt_pwr) { + dev_warn(dev->dev, "Error: EEPROM trgt power invalid %hhx!\n", + trgt_pwr); + trgt_pwr = 0x20; + } + + memset(dev->ee->chan_pwr, trgt_pwr, sizeof(dev->ee->chan_pwr)); +} + +static void +mt7601u_set_channel_power(struct mt7601u_dev *dev, u8 *eeprom) +{ + u32 i, val; + u8 max_pwr; + + val = mt7601u_rr(dev, MT_TX_ALC_CFG_0); + max_pwr = MT76_GET(MT_TX_ALC_CFG_0_LIMIT_0, val); + + if (mt7601u_has_tssi(dev, eeprom)) { + mt7601u_set_channel_target_power(dev, eeprom, max_pwr); + return; + } + + for (i = 0; i < 14; i++) { + s8 power = field_validate(eeprom[MT_EE_TX_POWER_OFFSET + i]); + + if (power > max_pwr || power < 0) + power = MT7601U_DEFAULT_TX_POWER; + + dev->ee->chan_pwr[i] = power; + } +} + +static void +mt7601u_set_country_reg(struct mt7601u_dev *dev, u8 *eeprom) +{ + /* Note: - region 31 is not valid for mt7601u (see rtmp_init.c) + * - comments in rtmp_def.h are incorrect (see rt_channel.c) + */ + static const struct reg_channel_bounds chan_bounds[] = { + /* EEPROM country regions 0 - 7 */ + { 1, 11 }, { 1, 13 }, { 10, 2 }, { 10, 4 }, + { 14, 1 }, { 1, 14 }, { 3, 7 }, { 5, 9 }, + /* EEPROM country regions 32 - 33 */ + { 1, 11 }, { 1, 14 } + }; + u8 val = eeprom[MT_EE_COUNTRY_REGION]; + int idx = -1; + + if (val < 8) + idx = val; + if (val > 31 && val < 33) + idx = val - 32 + 8; + + if (idx != -1) + dev_info(dev->dev, + "EEPROM country region %02hhx (channels %hhd-%hhd)\n", + val, chan_bounds[idx].start, + chan_bounds[idx].start + chan_bounds[idx].num - 1); + else + idx = 5; /* channels 1 - 14 */ + + dev->ee->reg = chan_bounds[idx]; + + /* TODO: country region 33 is special - phy should be set to B-mode + * before entering channel 14 (see sta/connect.c) + */ +} + +static void +mt7601u_set_rf_freq_off(struct mt7601u_dev *dev, u8 *eeprom) +{ + u8 comp; + + dev->ee->rf_freq_off = field_validate(eeprom[MT_EE_FREQ_OFFSET]); + comp = field_validate(eeprom[MT_EE_FREQ_OFFSET_COMPENSATION]); + + if (comp & BIT(7)) + dev->ee->rf_freq_off -= comp & 0x7f; + else + dev->ee->rf_freq_off += comp; +} + +static void +mt7601u_set_rssi_offset(struct mt7601u_dev *dev, u8 *eeprom) +{ + int i; + s8 *rssi_offset = dev->ee->rssi_offset; + + for (i = 0; i < 2; i++) { + rssi_offset[i] = eeprom[MT_EE_RSSI_OFFSET + i]; + + if (rssi_offset[i] < -10 || rssi_offset[i] > 10) { + dev_warn(dev->dev, + "Warning: EEPROM RSSI is invalid %02hhx\n", + rssi_offset[i]); + rssi_offset[i] = 0; + } + } +} + +static void +mt7601u_extra_power_over_mac(struct mt7601u_dev *dev) +{ + u32 val; + + val = ((mt7601u_rr(dev, MT_TX_PWR_CFG_1) & 0x0000ff00) >> 8); + val |= ((mt7601u_rr(dev, MT_TX_PWR_CFG_2) & 0x0000ff00) << 8); + mt7601u_wr(dev, MT_TX_PWR_CFG_7, val); + + val = ((mt7601u_rr(dev, MT_TX_PWR_CFG_4) & 0x0000ff00) >> 8); + mt7601u_wr(dev, MT_TX_PWR_CFG_9, val); +} + +static void +mt7601u_set_power_rate(struct power_per_rate *rate, s8 delta, u8 value) +{ + /* Invalid? Note: vendor driver does not handle this */ + if (value == 0xff) + return; + + rate->raw = s6_validate(value); + rate->bw20 = s6_to_int(value); + /* Note: vendor driver does cap the value to s6 right away */ + rate->bw40 = rate->bw20 + delta; +} + +static void +mt7601u_save_power_rate(struct mt7601u_dev *dev, s8 delta, u32 val, int i) +{ + struct mt7601u_rate_power *t = &dev->ee->power_rate_table; + + switch (i) { + case 0: + mt7601u_set_power_rate(&t->cck[0], delta, (val >> 0) & 0xff); + mt7601u_set_power_rate(&t->cck[1], delta, (val >> 8) & 0xff); + /* Save cck bw20 for fixups of channel 14 */ + dev->ee->real_cck_bw20[0] = t->cck[0].bw20; + dev->ee->real_cck_bw20[1] = t->cck[1].bw20; + + mt7601u_set_power_rate(&t->ofdm[0], delta, (val >> 16) & 0xff); + mt7601u_set_power_rate(&t->ofdm[1], delta, (val >> 24) & 0xff); + break; + case 1: + mt7601u_set_power_rate(&t->ofdm[2], delta, (val >> 0) & 0xff); + mt7601u_set_power_rate(&t->ofdm[3], delta, (val >> 8) & 0xff); + mt7601u_set_power_rate(&t->ht[0], delta, (val >> 16) & 0xff); + mt7601u_set_power_rate(&t->ht[1], delta, (val >> 24) & 0xff); + break; + case 2: + mt7601u_set_power_rate(&t->ht[2], delta, (val >> 0) & 0xff); + mt7601u_set_power_rate(&t->ht[3], delta, (val >> 8) & 0xff); + break; + } +} + +static s8 +get_delta(u8 val) +{ + s8 ret; + + if (!field_valid(val) || !(val & BIT(7))) + return 0; + + ret = val & 0x1f; + if (ret > 8) + ret = 8; + if (val & BIT(6)) + ret = -ret; + + return ret; +} + +static void +mt7601u_config_tx_power_per_rate(struct mt7601u_dev *dev, u8 *eeprom) +{ + u32 val; + s8 bw40_delta; + int i; + + bw40_delta = get_delta(eeprom[MT_EE_TX_POWER_DELTA_BW40]); + + for (i = 0; i < 5; i++) { + val = get_unaligned_le32(eeprom + MT_EE_TX_POWER_BYRATE(i)); + + mt7601u_save_power_rate(dev, bw40_delta, val, i); + + if (~val) + mt7601u_wr(dev, MT_TX_PWR_CFG_0 + i * 4, val); + } + + mt7601u_extra_power_over_mac(dev); +} + +static void +mt7601u_init_tssi_params(struct mt7601u_dev *dev, u8 *eeprom) +{ + struct tssi_data *d = &dev->ee->tssi_data; + + if (!dev->ee->tssi_enabled) + return; + + d->slope = eeprom[MT_EE_TX_TSSI_SLOPE]; + d->tx0_delta_offset = eeprom[MT_EE_TX_TSSI_OFFSET] * 1024; + d->offset[0] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP]; + d->offset[1] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP + 1]; + d->offset[2] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP + 2]; +} + +int +mt7601u_eeprom_init(struct mt7601u_dev *dev) +{ + u8 *eeprom; + int i, ret; + + ret = mt7601u_efuse_physical_size_check(dev); + if (ret) + return ret; + + dev->ee = devm_kzalloc(dev->dev, sizeof(*dev->ee), GFP_KERNEL); + if (!dev->ee) + return -ENOMEM; + + eeprom = kmalloc(MT7601U_EEPROM_SIZE, GFP_KERNEL); + if (!eeprom) + return -ENOMEM; + + for (i = 0; i + 16 <= MT7601U_EEPROM_SIZE; i += 16) { + ret = mt7601u_efuse_read(dev, i, eeprom + i, MT_EE_READ); + if (ret) + goto out; + } + + if (eeprom[MT_EE_VERSION_EE] > MT7601U_EE_MAX_VER) + dev_warn(dev->dev, + "Warning: unsupported EEPROM version %02hhx\n", + eeprom[MT_EE_VERSION_EE]); + dev_info(dev->dev, "EEPROM ver:%02hhx fae:%02hhx\n", + eeprom[MT_EE_VERSION_EE], eeprom[MT_EE_VERSION_FAE]); + + mt7601u_set_macaddr(dev, eeprom); + mt7601u_set_chip_cap(dev, eeprom); + mt7601u_set_channel_power(dev, eeprom); + mt7601u_set_country_reg(dev, eeprom); + mt7601u_set_rf_freq_off(dev, eeprom); + mt7601u_set_rssi_offset(dev, eeprom); + dev->ee->ref_temp = eeprom[MT_EE_REF_TEMP]; + dev->ee->lna_gain = eeprom[MT_EE_LNA_GAIN]; + + mt7601u_config_tx_power_per_rate(dev, eeprom); + + mt7601u_init_tssi_params(dev, eeprom); +out: + kfree(eeprom); + return ret; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.h b/drivers/net/wireless/mediatek/mt7601u/eeprom.h new file mode 100644 index 0000000..662d127 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.h @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_EEPROM_H +#define __MT7601U_EEPROM_H + +struct mt7601u_dev; + +#define MT7601U_EE_MAX_VER 0x0c +#define MT7601U_EEPROM_SIZE 256 + +#define MT7601U_DEFAULT_TX_POWER 6 + +enum mt76_eeprom_field { + MT_EE_CHIP_ID = 0x00, + MT_EE_VERSION_FAE = 0x02, + MT_EE_VERSION_EE = 0x03, + MT_EE_MAC_ADDR = 0x04, + MT_EE_NIC_CONF_0 = 0x34, + MT_EE_NIC_CONF_1 = 0x36, + MT_EE_COUNTRY_REGION = 0x39, + MT_EE_FREQ_OFFSET = 0x3a, + MT_EE_NIC_CONF_2 = 0x42, + + MT_EE_LNA_GAIN = 0x44, + MT_EE_RSSI_OFFSET = 0x46, + + MT_EE_TX_POWER_DELTA_BW40 = 0x50, + MT_EE_TX_POWER_OFFSET = 0x52, + + MT_EE_TX_TSSI_SLOPE = 0x6e, + MT_EE_TX_TSSI_OFFSET_GROUP = 0x6f, + MT_EE_TX_TSSI_OFFSET = 0x76, + + MT_EE_TX_TSSI_TARGET_POWER = 0xd0, + MT_EE_REF_TEMP = 0xd1, + MT_EE_FREQ_OFFSET_COMPENSATION = 0xdb, + MT_EE_TX_POWER_BYRATE_BASE = 0xde, + + MT_EE_USAGE_MAP_START = 0x1e0, + MT_EE_USAGE_MAP_END = 0x1fc, +}; + +#define MT_EE_NIC_CONF_0_RX_PATH GENMASK(3, 0) +#define MT_EE_NIC_CONF_0_TX_PATH GENMASK(7, 4) +#define MT_EE_NIC_CONF_0_BOARD_TYPE GENMASK(13, 12) + +#define MT_EE_NIC_CONF_1_HW_RF_CTRL BIT(0) +#define MT_EE_NIC_CONF_1_TEMP_TX_ALC BIT(1) +#define MT_EE_NIC_CONF_1_LNA_EXT_2G BIT(2) +#define MT_EE_NIC_CONF_1_LNA_EXT_5G BIT(3) +#define MT_EE_NIC_CONF_1_TX_ALC_EN BIT(13) + +#define MT_EE_NIC_CONF_2_RX_STREAM GENMASK(3, 0) +#define MT_EE_NIC_CONF_2_TX_STREAM GENMASK(7, 4) +#define MT_EE_NIC_CONF_2_HW_ANTDIV BIT(8) +#define MT_EE_NIC_CONF_2_XTAL_OPTION GENMASK(10, 9) +#define MT_EE_NIC_CONF_2_TEMP_DISABLE BIT(11) +#define MT_EE_NIC_CONF_2_COEX_METHOD GENMASK(15, 13) + +#define MT_EE_TX_POWER_BYRATE(i) (MT_EE_TX_POWER_BYRATE_BASE + \ + (i) * 4) + +#define MT_EFUSE_USAGE_MAP_SIZE (MT_EE_USAGE_MAP_END - \ + MT_EE_USAGE_MAP_START + 1) + +enum mt7601u_eeprom_access_modes { + MT_EE_READ = 0, + MT_EE_PHYSICAL_READ = 1, +}; + +struct power_per_rate { + u8 raw; /* validated s6 value */ + s8 bw20; /* sign-extended int */ + s8 bw40; /* sign-extended int */ +}; + +/* Power per rate - one value per two rates */ +struct mt7601u_rate_power { + struct power_per_rate cck[2]; + struct power_per_rate ofdm[4]; + struct power_per_rate ht[4]; +}; + +struct reg_channel_bounds { + u8 start; + u8 num; +}; + +struct mt7601u_eeprom_params { + bool tssi_enabled; + u8 rf_freq_off; + s8 rssi_offset[2]; + s8 ref_temp; + s8 lna_gain; + + u8 chan_pwr[14]; + struct mt7601u_rate_power power_rate_table; + s8 real_cck_bw20[2]; + + /* TSSI stuff - only with internal TX ALC */ + struct tssi_data { + int tx0_delta_offset; + u8 slope; + u8 offset[3]; + } tssi_data; + + struct reg_channel_bounds reg; +}; + +int mt7601u_eeprom_init(struct mt7601u_dev *dev); + +static inline u32 s6_validate(u32 reg) +{ + WARN_ON(reg & ~GENMASK(5, 0)); + return reg & GENMASK(5, 0); +} + +static inline int s6_to_int(u32 reg) +{ + int s6; + + s6 = s6_validate(reg); + if (s6 & BIT(5)) + s6 -= BIT(6); + + return s6; +} + +static inline u32 int_to_s6(int val) +{ + if (val < -0x20) + return 0x20; + if (val > 0x1f) + return 0x1f; + + return val & 0x3f; +} + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/init.c b/drivers/net/wireless/mediatek/mt7601u/init.c new file mode 100644 index 0000000..45eb079 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/init.c @@ -0,0 +1,628 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "eeprom.h" +#include "trace.h" +#include "mcu.h" + +#include "initvals.h" + +static void +mt7601u_set_wlan_state(struct mt7601u_dev *dev, u32 val, bool enable) +{ + int i; + + /* Note: we don't turn off WLAN_CLK because that makes the device + * not respond properly on the probe path. + * In case anyone (PSM?) wants to use this function we can + * bring the clock stuff back and fixup the probe path. + */ + + if (enable) + val |= (MT_WLAN_FUN_CTRL_WLAN_EN | + MT_WLAN_FUN_CTRL_WLAN_CLK_EN); + else + val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN); + + mt7601u_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + if (enable) { + set_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state); + } else { + clear_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state); + return; + } + + for (i = 200; i; i--) { + val = mt7601u_rr(dev, MT_CMB_CTRL); + + if (val & MT_CMB_CTRL_XTAL_RDY && val & MT_CMB_CTRL_PLL_LD) + break; + + udelay(20); + } + + /* Note: vendor driver tries to disable/enable wlan here and retry + * but the code which does it is so buggy it must have never + * triggered, so don't bother. + */ + if (!i) + dev_err(dev->dev, "Error: PLL and XTAL check failed!\n"); +} + +static void mt7601u_chip_onoff(struct mt7601u_dev *dev, bool enable, bool reset) +{ + u32 val; + + mutex_lock(&dev->hw_atomic_mutex); + + val = mt7601u_rr(dev, MT_WLAN_FUN_CTRL); + + if (reset) { + val |= MT_WLAN_FUN_CTRL_GPIO_OUT_EN; + val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL; + + if (val & MT_WLAN_FUN_CTRL_WLAN_EN) { + val |= (MT_WLAN_FUN_CTRL_WLAN_RESET | + MT_WLAN_FUN_CTRL_WLAN_RESET_RF); + mt7601u_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + val &= ~(MT_WLAN_FUN_CTRL_WLAN_RESET | + MT_WLAN_FUN_CTRL_WLAN_RESET_RF); + } + } + + mt7601u_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + mt7601u_set_wlan_state(dev, val, enable); + + mutex_unlock(&dev->hw_atomic_mutex); +} + +static void mt7601u_reset_csr_bbp(struct mt7601u_dev *dev) +{ + mt7601u_wr(dev, MT_MAC_SYS_CTRL, (MT_MAC_SYS_CTRL_RESET_CSR | + MT_MAC_SYS_CTRL_RESET_BBP)); + mt7601u_wr(dev, MT_USB_DMA_CFG, 0); + msleep(1); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); +} + +static void mt7601u_init_usb_dma(struct mt7601u_dev *dev) +{ + u32 val; + + val = MT76_SET(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, MT_USB_AGGR_TIMEOUT) | + MT76_SET(MT_USB_DMA_CFG_RX_BULK_AGG_LMT, MT_USB_AGGR_SIZE_LIMIT) | + MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN; + if (dev->in_max_packet == 512) + val |= MT_USB_DMA_CFG_RX_BULK_AGG_EN; + mt7601u_wr(dev, MT_USB_DMA_CFG, val); + + val |= MT_USB_DMA_CFG_UDMA_RX_WL_DROP; + mt7601u_wr(dev, MT_USB_DMA_CFG, val); + val &= ~MT_USB_DMA_CFG_UDMA_RX_WL_DROP; + mt7601u_wr(dev, MT_USB_DMA_CFG, val); +} + +static int mt7601u_init_bbp(struct mt7601u_dev *dev) +{ + int ret; + + ret = mt7601u_wait_bbp_ready(dev); + if (ret) + return ret; + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, bbp_common_vals, + ARRAY_SIZE(bbp_common_vals)); + if (ret) + return ret; + + return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, bbp_chip_vals, + ARRAY_SIZE(bbp_chip_vals)); +} + +static void +mt76_init_beacon_offsets(struct mt7601u_dev *dev) +{ + u16 base = MT_BEACON_BASE; + u32 regs[4] = {}; + int i; + + for (i = 0; i < 16; i++) { + u16 addr = dev->beacon_offsets[i]; + + regs[i / 4] |= ((addr - base) / 64) << (8 * (i % 4)); + } + + for (i = 0; i < 4; i++) + mt7601u_wr(dev, MT_BCN_OFFSET(i), regs[i]); +} + +static int mt7601u_write_mac_initvals(struct mt7601u_dev *dev) +{ + int ret; + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_WLAN, mac_common_vals, + ARRAY_SIZE(mac_common_vals)); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_WLAN, + mac_chip_vals, ARRAY_SIZE(mac_chip_vals)); + if (ret) + return ret; + + mt76_init_beacon_offsets(dev); + + mt7601u_wr(dev, MT_AUX_CLK_CFG, 0); + + return 0; +} + +static int mt7601u_init_wcid_mem(struct mt7601u_dev *dev) +{ + u32 *vals; + int i, ret; + + vals = kmalloc(sizeof(*vals) * N_WCIDS * 2, GFP_KERNEL); + if (!vals) + return -ENOMEM; + + for (i = 0; i < N_WCIDS; i++) { + vals[i * 2] = 0xffffffff; + vals[i * 2 + 1] = 0x00ffffff; + } + + ret = mt7601u_burst_write_regs(dev, MT_WCID_ADDR_BASE, + vals, N_WCIDS * 2); + kfree(vals); + + return ret; +} + +static int mt7601u_init_key_mem(struct mt7601u_dev *dev) +{ + u32 vals[4] = {}; + + return mt7601u_burst_write_regs(dev, MT_SKEY_MODE_BASE_0, + vals, ARRAY_SIZE(vals)); +} + +static int mt7601u_init_wcid_attr_mem(struct mt7601u_dev *dev) +{ + u32 *vals; + int i, ret; + + vals = kmalloc(sizeof(*vals) * N_WCIDS * 2, GFP_KERNEL); + if (!vals) + return -ENOMEM; + + for (i = 0; i < N_WCIDS * 2; i++) + vals[i] = 1; + + ret = mt7601u_burst_write_regs(dev, MT_WCID_ATTR_BASE, + vals, N_WCIDS * 2); + kfree(vals); + + return ret; +} + +static void mt7601u_reset_counters(struct mt7601u_dev *dev) +{ + mt7601u_rr(dev, MT_RX_STA_CNT0); + mt7601u_rr(dev, MT_RX_STA_CNT1); + mt7601u_rr(dev, MT_RX_STA_CNT2); + mt7601u_rr(dev, MT_TX_STA_CNT0); + mt7601u_rr(dev, MT_TX_STA_CNT1); + mt7601u_rr(dev, MT_TX_STA_CNT2); +} + +int mt7601u_mac_start(struct mt7601u_dev *dev) +{ + mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_TX); + + if (!mt76_poll(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_TX_DMA_BUSY | + MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 200000)) + return -ETIMEDOUT; + + dev->rxfilter = MT_RX_FILTR_CFG_CRC_ERR | + MT_RX_FILTR_CFG_PHY_ERR | MT_RX_FILTR_CFG_PROMISC | + MT_RX_FILTR_CFG_VER_ERR | MT_RX_FILTR_CFG_DUP | + MT_RX_FILTR_CFG_CFACK | MT_RX_FILTR_CFG_CFEND | + MT_RX_FILTR_CFG_ACK | MT_RX_FILTR_CFG_CTS | + MT_RX_FILTR_CFG_RTS | MT_RX_FILTR_CFG_PSPOLL | + MT_RX_FILTR_CFG_BA | MT_RX_FILTR_CFG_CTRL_RSV; + mt7601u_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, + MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX); + + if (!mt76_poll(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_TX_DMA_BUSY | + MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 50)) + return -ETIMEDOUT; + + return 0; +} + +static void mt7601u_mac_stop_hw(struct mt7601u_dev *dev) +{ + int i, ok; + + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return; + + mt76_clear(dev, MT_BEACON_TIME_CFG, MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | MT_BEACON_TIME_CFG_TBTT_EN | + MT_BEACON_TIME_CFG_BEACON_TX); + + if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000)) + dev_warn(dev->dev, "Warning: TX DMA did not stop!\n"); + + /* Page count on TxQ */ + i = 200; + while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) || + (mt76_rr(dev, 0x0a30) & 0x000000ff) || + (mt76_rr(dev, 0x0a34) & 0x00ff00ff))) + msleep(10); + + if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX, 0, 1000)) + dev_warn(dev->dev, "Warning: MAC TX did not stop!\n"); + + mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX | + MT_MAC_SYS_CTRL_ENABLE_TX); + + /* Page count on RxQ */ + ok = 0; + i = 200; + while (i--) { + if ((mt76_rr(dev, 0x0430) & 0x00ff0000) || + (mt76_rr(dev, 0x0a30) & 0xffffffff) || + (mt76_rr(dev, 0x0a34) & 0xffffffff)) + ok++; + if (ok > 6) + break; + + msleep(1); + } + + if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000)) + dev_warn(dev->dev, "Warning: MAC RX did not stop!\n"); + + if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000)) + dev_warn(dev->dev, "Warning: RX DMA did not stop!\n"); +} + +void mt7601u_mac_stop(struct mt7601u_dev *dev) +{ + mt7601u_mac_stop_hw(dev); + flush_delayed_work(&dev->stat_work); + cancel_delayed_work_sync(&dev->stat_work); +} + +static void mt7601u_stop_hardware(struct mt7601u_dev *dev) +{ + mt7601u_chip_onoff(dev, false, false); +} + +int mt7601u_init_hardware(struct mt7601u_dev *dev) +{ + static const u16 beacon_offsets[16] = { + /* 512 byte per beacon */ + 0xc000, 0xc200, 0xc400, 0xc600, + 0xc800, 0xca00, 0xcc00, 0xce00, + 0xd000, 0xd200, 0xd400, 0xd600, + 0xd800, 0xda00, 0xdc00, 0xde00 + }; + int ret; + + dev->beacon_offsets = beacon_offsets; + + mt7601u_chip_onoff(dev, true, false); + + ret = mt7601u_wait_asic_ready(dev); + if (ret) + goto err; + ret = mt7601u_mcu_init(dev); + if (ret) + goto err; + + if (!mt76_poll_msec(dev, MT_WPDMA_GLO_CFG, + MT_WPDMA_GLO_CFG_TX_DMA_BUSY | + MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 100)) { + ret = -EIO; + goto err; + } + + /* Wait for ASIC ready after FW load. */ + ret = mt7601u_wait_asic_ready(dev); + if (ret) + goto err; + + mt7601u_reset_csr_bbp(dev); + mt7601u_init_usb_dma(dev); + + ret = mt7601u_mcu_cmd_init(dev); + if (ret) + goto err; + ret = mt7601u_dma_init(dev); + if (ret) + goto err_mcu; + ret = mt7601u_write_mac_initvals(dev); + if (ret) + goto err_rx; + + if (!mt76_poll_msec(dev, MT_MAC_STATUS, + MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, 0, 100)) { + ret = -EIO; + goto err_rx; + } + + ret = mt7601u_init_bbp(dev); + if (ret) + goto err_rx; + ret = mt7601u_init_wcid_mem(dev); + if (ret) + goto err_rx; + ret = mt7601u_init_key_mem(dev); + if (ret) + goto err_rx; + ret = mt7601u_init_wcid_attr_mem(dev); + if (ret) + goto err_rx; + + mt76_clear(dev, MT_BEACON_TIME_CFG, (MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | + MT_BEACON_TIME_CFG_TBTT_EN | + MT_BEACON_TIME_CFG_BEACON_TX)); + + mt7601u_reset_counters(dev); + + mt7601u_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e); + + mt7601u_wr(dev, MT_TXOP_CTRL_CFG, MT76_SET(MT_TXOP_TRUN_EN, 0x3f) | + MT76_SET(MT_TXOP_EXT_CCA_DLY, 0x58)); + + ret = mt7601u_eeprom_init(dev); + if (ret) + goto err_rx; + + ret = mt7601u_phy_init(dev); + if (ret) + goto err_rx; + + mt7601u_set_rx_path(dev, 0); + mt7601u_set_tx_dac(dev, 0); + + mt7601u_mac_set_ctrlch(dev, false); + mt7601u_bbp_set_ctrlch(dev, false); + mt7601u_bbp_set_bw(dev, MT_BW_20); + + return 0; + +err_rx: + mt7601u_dma_cleanup(dev); +err_mcu: + mt7601u_mcu_cmd_deinit(dev); +err: + mt7601u_chip_onoff(dev, false, false); + return ret; +} + +void mt7601u_cleanup(struct mt7601u_dev *dev) +{ + if (!test_and_clear_bit(MT7601U_STATE_INITIALIZED, &dev->state)) + return; + + mt7601u_stop_hardware(dev); + mt7601u_dma_cleanup(dev); + mt7601u_mcu_cmd_deinit(dev); +} + +struct mt7601u_dev *mt7601u_alloc_device(struct device *pdev) +{ + struct ieee80211_hw *hw; + struct mt7601u_dev *dev; + + hw = ieee80211_alloc_hw(sizeof(*dev), &mt7601u_ops); + if (!hw) + return NULL; + + dev = hw->priv; + dev->dev = pdev; + dev->hw = hw; + mutex_init(&dev->vendor_req_mutex); + mutex_init(&dev->reg_atomic_mutex); + mutex_init(&dev->hw_atomic_mutex); + mutex_init(&dev->mutex); + spin_lock_init(&dev->tx_lock); + spin_lock_init(&dev->rx_lock); + spin_lock_init(&dev->lock); + spin_lock_init(&dev->con_mon_lock); + atomic_set(&dev->avg_ampdu_len, 1); + + dev->stat_wq = alloc_workqueue("mt7601u", WQ_UNBOUND, 0); + if (!dev->stat_wq) { + ieee80211_free_hw(hw); + return NULL; + } + + return dev; +} + +#define CHAN2G(_idx, _freq) { \ + .band = IEEE80211_BAND_2GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_idx), \ + .max_power = 30, \ +} + +static const struct ieee80211_channel mt76_channels_2ghz[] = { + CHAN2G(1, 2412), + CHAN2G(2, 2417), + CHAN2G(3, 2422), + CHAN2G(4, 2427), + CHAN2G(5, 2432), + CHAN2G(6, 2437), + CHAN2G(7, 2442), + CHAN2G(8, 2447), + CHAN2G(9, 2452), + CHAN2G(10, 2457), + CHAN2G(11, 2462), + CHAN2G(12, 2467), + CHAN2G(13, 2472), + CHAN2G(14, 2484), +}; + +#define CCK_RATE(_idx, _rate) { \ + .bitrate = _rate, \ + .flags = IEEE80211_RATE_SHORT_PREAMBLE, \ + .hw_value = (MT_PHY_TYPE_CCK << 8) | _idx, \ + .hw_value_short = (MT_PHY_TYPE_CCK << 8) | (8 + _idx), \ +} + +#define OFDM_RATE(_idx, _rate) { \ + .bitrate = _rate, \ + .hw_value = (MT_PHY_TYPE_OFDM << 8) | _idx, \ + .hw_value_short = (MT_PHY_TYPE_OFDM << 8) | _idx, \ +} + +static struct ieee80211_rate mt76_rates[] = { + CCK_RATE(0, 10), + CCK_RATE(1, 20), + CCK_RATE(2, 55), + CCK_RATE(3, 110), + OFDM_RATE(0, 60), + OFDM_RATE(1, 90), + OFDM_RATE(2, 120), + OFDM_RATE(3, 180), + OFDM_RATE(4, 240), + OFDM_RATE(5, 360), + OFDM_RATE(6, 480), + OFDM_RATE(7, 540), +}; + +static int +mt76_init_sband(struct mt7601u_dev *dev, struct ieee80211_supported_band *sband, + const struct ieee80211_channel *chan, int n_chan, + struct ieee80211_rate *rates, int n_rates) +{ + struct ieee80211_sta_ht_cap *ht_cap; + void *chanlist; + int size; + + size = n_chan * sizeof(*chan); + chanlist = devm_kmemdup(dev->dev, chan, size, GFP_KERNEL); + if (!chanlist) + return -ENOMEM; + + sband->channels = chanlist; + sband->n_channels = n_chan; + sband->bitrates = rates; + sband->n_bitrates = n_rates; + + ht_cap = &sband->ht_cap; + ht_cap->ht_supported = true; + ht_cap->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT); + + ht_cap->mcs.rx_mask[0] = 0xff; + ht_cap->mcs.rx_mask[4] = 0x1; + ht_cap->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; + ht_cap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; + ht_cap->ampdu_density = IEEE80211_HT_MPDU_DENSITY_2; + + dev->chandef.chan = &sband->channels[0]; + + return 0; +} + +static int +mt76_init_sband_2g(struct mt7601u_dev *dev) +{ + dev->sband_2g = devm_kzalloc(dev->dev, sizeof(*dev->sband_2g), + GFP_KERNEL); + dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = dev->sband_2g; + + WARN_ON(dev->ee->reg.start - 1 + dev->ee->reg.num > + ARRAY_SIZE(mt76_channels_2ghz)); + + return mt76_init_sband(dev, dev->sband_2g, + &mt76_channels_2ghz[dev->ee->reg.start - 1], + dev->ee->reg.num, + mt76_rates, ARRAY_SIZE(mt76_rates)); +} + +int mt7601u_register_device(struct mt7601u_dev *dev) +{ + struct ieee80211_hw *hw = dev->hw; + struct wiphy *wiphy = hw->wiphy; + int ret; + + /* Reserve WCID 0 for mcast - thanks to this APs WCID will go to + * entry no. 1 like it does in the vendor driver. + */ + dev->wcid_mask[0] |= 1; + + /* init fake wcid for monitor interfaces */ + dev->mon_wcid = devm_kmalloc(dev->dev, sizeof(*dev->mon_wcid), + GFP_KERNEL); + if (!dev->mon_wcid) + return -ENOMEM; + dev->mon_wcid->idx = 0xff; + dev->mon_wcid->hw_key_idx = -1; + + SET_IEEE80211_DEV(hw, dev->dev); + + hw->queues = 4; + hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_PS_NULLFUNC_STACK | + IEEE80211_HW_SUPPORTS_HT_CCK_RATES | + IEEE80211_HW_AMPDU_AGGREGATION | + IEEE80211_HW_SUPPORTS_RC_TABLE; + hw->max_rates = 1; + hw->max_report_rates = 7; + hw->max_rate_tries = 1; + + hw->sta_data_size = sizeof(struct mt76_sta); + hw->vif_data_size = sizeof(struct mt76_vif); + + SET_IEEE80211_PERM_ADDR(hw, dev->macaddr); + + wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR; + wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + + ret = mt76_init_sband_2g(dev); + if (ret) + return ret; + + INIT_DELAYED_WORK(&dev->mac_work, mt7601u_mac_work); + INIT_DELAYED_WORK(&dev->stat_work, mt7601u_tx_stat); + + ret = ieee80211_register_hw(hw); + if (ret) + return ret; + + mt7601u_init_debugfs(dev); + + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/initvals.h b/drivers/net/wireless/mediatek/mt7601u/initvals.h new file mode 100644 index 0000000..ec11ff6 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/initvals.h @@ -0,0 +1,164 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_INITVALS_H +#define __MT7601U_INITVALS_H + +static const struct mt76_reg_pair bbp_common_vals[] = { + { 65, 0x2c }, + { 66, 0x38 }, + { 68, 0x0b }, + { 69, 0x12 }, + { 70, 0x0a }, + { 73, 0x10 }, + { 81, 0x37 }, + { 82, 0x62 }, + { 83, 0x6a }, + { 84, 0x99 }, + { 86, 0x00 }, + { 91, 0x04 }, + { 92, 0x00 }, + { 103, 0x00 }, + { 105, 0x05 }, + { 106, 0x35 }, +}; + +static const struct mt76_reg_pair bbp_chip_vals[] = { + { 1, 0x04 }, { 4, 0x40 }, { 20, 0x06 }, { 31, 0x08 }, + /* CCK Tx Control */ + { 178, 0xff }, + /* AGC/Sync controls */ + { 66, 0x14 }, { 68, 0x8b }, { 69, 0x12 }, { 70, 0x09 }, + { 73, 0x11 }, { 75, 0x60 }, { 76, 0x44 }, { 84, 0x9a }, + { 86, 0x38 }, { 91, 0x07 }, { 92, 0x02 }, + /* Rx Path Controls */ + { 99, 0x50 }, { 101, 0x00 }, { 103, 0xc0 }, { 104, 0x92 }, + { 105, 0x3c }, { 106, 0x03 }, { 128, 0x12 }, + /* Change RXWI content: Gain Report */ + { 142, 0x04 }, { 143, 0x37 }, + /* Change RXWI content: Antenna Report */ + { 142, 0x03 }, { 143, 0x99 }, + /* Calibration Index Register */ + /* CCK Receiver Control */ + { 160, 0xeb }, { 161, 0xc4 }, { 162, 0x77 }, { 163, 0xf9 }, + { 164, 0x88 }, { 165, 0x80 }, { 166, 0xff }, { 167, 0xe4 }, + /* Added AGC controls - these AGC/GLRT registers are accessed + * through R195 and R196. + */ + { 195, 0x00 }, { 196, 0x00 }, + { 195, 0x01 }, { 196, 0x04 }, + { 195, 0x02 }, { 196, 0x20 }, + { 195, 0x03 }, { 196, 0x0a }, + { 195, 0x06 }, { 196, 0x16 }, + { 195, 0x07 }, { 196, 0x05 }, + { 195, 0x08 }, { 196, 0x37 }, + { 195, 0x0a }, { 196, 0x15 }, + { 195, 0x0b }, { 196, 0x17 }, + { 195, 0x0c }, { 196, 0x06 }, + { 195, 0x0d }, { 196, 0x09 }, + { 195, 0x0e }, { 196, 0x05 }, + { 195, 0x0f }, { 196, 0x09 }, + { 195, 0x10 }, { 196, 0x20 }, + { 195, 0x20 }, { 196, 0x17 }, + { 195, 0x21 }, { 196, 0x06 }, + { 195, 0x22 }, { 196, 0x09 }, + { 195, 0x23 }, { 196, 0x17 }, + { 195, 0x24 }, { 196, 0x06 }, + { 195, 0x25 }, { 196, 0x09 }, + { 195, 0x26 }, { 196, 0x17 }, + { 195, 0x27 }, { 196, 0x06 }, + { 195, 0x28 }, { 196, 0x09 }, + { 195, 0x29 }, { 196, 0x05 }, + { 195, 0x2a }, { 196, 0x09 }, + { 195, 0x80 }, { 196, 0x8b }, + { 195, 0x81 }, { 196, 0x12 }, + { 195, 0x82 }, { 196, 0x09 }, + { 195, 0x83 }, { 196, 0x17 }, + { 195, 0x84 }, { 196, 0x11 }, + { 195, 0x85 }, { 196, 0x00 }, + { 195, 0x86 }, { 196, 0x00 }, + { 195, 0x87 }, { 196, 0x18 }, + { 195, 0x88 }, { 196, 0x60 }, + { 195, 0x89 }, { 196, 0x44 }, + { 195, 0x8a }, { 196, 0x8b }, + { 195, 0x8b }, { 196, 0x8b }, + { 195, 0x8c }, { 196, 0x8b }, + { 195, 0x8d }, { 196, 0x8b }, + { 195, 0x8e }, { 196, 0x09 }, + { 195, 0x8f }, { 196, 0x09 }, + { 195, 0x90 }, { 196, 0x09 }, + { 195, 0x91 }, { 196, 0x09 }, + { 195, 0x92 }, { 196, 0x11 }, + { 195, 0x93 }, { 196, 0x11 }, + { 195, 0x94 }, { 196, 0x11 }, + { 195, 0x95 }, { 196, 0x11 }, + /* PPAD */ + { 47, 0x80 }, { 60, 0x80 }, { 150, 0xd2 }, { 151, 0x32 }, + { 152, 0x23 }, { 153, 0x41 }, { 154, 0x00 }, { 155, 0x4f }, + { 253, 0x7e }, { 195, 0x30 }, { 196, 0x32 }, { 195, 0x31 }, + { 196, 0x23 }, { 195, 0x32 }, { 196, 0x45 }, { 195, 0x35 }, + { 196, 0x4a }, { 195, 0x36 }, { 196, 0x5a }, { 195, 0x37 }, + { 196, 0x5a }, +}; + +static const struct mt76_reg_pair mac_common_vals[] = { + { MT_LEGACY_BASIC_RATE, 0x0000013f }, + { MT_HT_BASIC_RATE, 0x00008003 }, + { MT_MAC_SYS_CTRL, 0x00000000 }, + { MT_RX_FILTR_CFG, 0x00017f97 }, + { MT_BKOFF_SLOT_CFG, 0x00000209 }, + { MT_TX_SW_CFG0, 0x00000000 }, + { MT_TX_SW_CFG1, 0x00080606 }, + { MT_TX_LINK_CFG, 0x00001020 }, + { MT_TX_TIMEOUT_CFG, 0x000a2090 }, + { MT_MAX_LEN_CFG, 0x00003fff }, + { MT_PBF_TX_MAX_PCNT, 0x1fbf1f1f }, + { MT_PBF_RX_MAX_PCNT, 0x0000009f }, + { MT_TX_RETRY_CFG, 0x47d01f0f }, + { MT_AUTO_RSP_CFG, 0x00000013 }, + { MT_CCK_PROT_CFG, 0x05740003 }, + { MT_OFDM_PROT_CFG, 0x05740003 }, + { MT_MM40_PROT_CFG, 0x03f44084 }, + { MT_GF20_PROT_CFG, 0x01744004 }, + { MT_GF40_PROT_CFG, 0x03f44084 }, + { MT_MM20_PROT_CFG, 0x01744004 }, + { MT_TXOP_CTRL_CFG, 0x0000583f }, + { MT_TX_RTS_CFG, 0x01092b20 }, + { MT_EXP_ACK_TIME, 0x002400ca }, + { MT_TXOP_HLDR_ET, 0x00000002 }, + { MT_XIFS_TIME_CFG, 0x33a41010 }, + { MT_PWR_PIN_CFG, 0x00000000 }, +}; + +static const struct mt76_reg_pair mac_chip_vals[] = { + { MT_TSO_CTRL, 0x00006050 }, + { MT_BCN_OFFSET(0), 0x18100800 }, + { MT_BCN_OFFSET(1), 0x38302820 }, + { MT_PBF_SYS_CTRL, 0x00080c00 }, + { MT_PBF_CFG, 0x7f723c1f }, + { MT_FCE_PSE_CTRL, 0x00000001 }, + { MT_PAUSE_ENABLE_CONTROL1, 0x00000000 }, + { MT_TX0_RF_GAIN_CORR, 0x003b0005 }, + { MT_TX0_RF_GAIN_ATTEN, 0x00006900 }, + { MT_TX0_BB_GAIN_ATTEN, 0x00000400 }, + { MT_TX_ALC_VGA3, 0x00060006 }, + { MT_TX_SW_CFG0, 0x00000402 }, + { MT_TX_SW_CFG1, 0x00000000 }, + { MT_TX_SW_CFG2, 0x00000000 }, + { MT_HEADER_TRANS_CTRL_REG, 0x00000000 }, + { MT_FCE_CSO, 0x0000030f }, + { MT_FCE_PARAMETERS, 0x00256f0f }, +}; + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/initvals_phy.h b/drivers/net/wireless/mediatek/mt7601u/initvals_phy.h new file mode 100644 index 0000000..a2bdc3e --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/initvals_phy.h @@ -0,0 +1,291 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_PHY_INITVALS_H +#define __MT7601U_PHY_INITVALS_H + +#define RF_REG_PAIR(bank, reg, value) \ + { MT_MCU_MEMMAP_RF | (bank) << 16 | (reg), value } + +static const struct mt76_reg_pair rf_central[] = { + /* Bank 0 - for central blocks: BG, PLL, XTAL, LO, ADC/DAC */ + RF_REG_PAIR(0, 0, 0x02), + RF_REG_PAIR(0, 1, 0x01), + RF_REG_PAIR(0, 2, 0x11), + RF_REG_PAIR(0, 3, 0xff), + RF_REG_PAIR(0, 4, 0x0a), + RF_REG_PAIR(0, 5, 0x20), + RF_REG_PAIR(0, 6, 0x00), + /* B/G */ + RF_REG_PAIR(0, 7, 0x00), + RF_REG_PAIR(0, 8, 0x00), + RF_REG_PAIR(0, 9, 0x00), + RF_REG_PAIR(0, 10, 0x00), + RF_REG_PAIR(0, 11, 0x21), + /* XO */ + RF_REG_PAIR(0, 13, 0x00), /* 40mhz xtal */ + /* RF_REG_PAIR(0, 13, 0x13), */ /* 20mhz xtal */ + RF_REG_PAIR(0, 14, 0x7c), + RF_REG_PAIR(0, 15, 0x22), + RF_REG_PAIR(0, 16, 0x80), + /* PLL */ + RF_REG_PAIR(0, 17, 0x99), + RF_REG_PAIR(0, 18, 0x99), + RF_REG_PAIR(0, 19, 0x09), + RF_REG_PAIR(0, 20, 0x50), + RF_REG_PAIR(0, 21, 0xb0), + RF_REG_PAIR(0, 22, 0x00), + RF_REG_PAIR(0, 23, 0xc5), + RF_REG_PAIR(0, 24, 0xfc), + RF_REG_PAIR(0, 25, 0x40), + RF_REG_PAIR(0, 26, 0x4d), + RF_REG_PAIR(0, 27, 0x02), + RF_REG_PAIR(0, 28, 0x72), + RF_REG_PAIR(0, 29, 0x01), + RF_REG_PAIR(0, 30, 0x00), + RF_REG_PAIR(0, 31, 0x00), + /* test ports */ + RF_REG_PAIR(0, 32, 0x00), + RF_REG_PAIR(0, 33, 0x00), + RF_REG_PAIR(0, 34, 0x23), + RF_REG_PAIR(0, 35, 0x01), /* change setting to reduce spurs */ + RF_REG_PAIR(0, 36, 0x00), + RF_REG_PAIR(0, 37, 0x00), + /* ADC/DAC */ + RF_REG_PAIR(0, 38, 0x00), + RF_REG_PAIR(0, 39, 0x20), + RF_REG_PAIR(0, 40, 0x00), + RF_REG_PAIR(0, 41, 0xd0), + RF_REG_PAIR(0, 42, 0x1b), + RF_REG_PAIR(0, 43, 0x02), + RF_REG_PAIR(0, 44, 0x00), +}; + +static const struct mt76_reg_pair rf_channel[] = { + RF_REG_PAIR(4, 0, 0x01), + RF_REG_PAIR(4, 1, 0x00), + RF_REG_PAIR(4, 2, 0x00), + RF_REG_PAIR(4, 3, 0x00), + /* LDO */ + RF_REG_PAIR(4, 4, 0x00), + RF_REG_PAIR(4, 5, 0x08), + RF_REG_PAIR(4, 6, 0x00), + /* RX */ + RF_REG_PAIR(4, 7, 0x5b), + RF_REG_PAIR(4, 8, 0x52), + RF_REG_PAIR(4, 9, 0xb6), + RF_REG_PAIR(4, 10, 0x57), + RF_REG_PAIR(4, 11, 0x33), + RF_REG_PAIR(4, 12, 0x22), + RF_REG_PAIR(4, 13, 0x3d), + RF_REG_PAIR(4, 14, 0x3e), + RF_REG_PAIR(4, 15, 0x13), + RF_REG_PAIR(4, 16, 0x22), + RF_REG_PAIR(4, 17, 0x23), + RF_REG_PAIR(4, 18, 0x02), + RF_REG_PAIR(4, 19, 0xa4), + RF_REG_PAIR(4, 20, 0x01), + RF_REG_PAIR(4, 21, 0x12), + RF_REG_PAIR(4, 22, 0x80), + RF_REG_PAIR(4, 23, 0xb3), + RF_REG_PAIR(4, 24, 0x00), /* reserved */ + RF_REG_PAIR(4, 25, 0x00), /* reserved */ + RF_REG_PAIR(4, 26, 0x00), /* reserved */ + RF_REG_PAIR(4, 27, 0x00), /* reserved */ + /* LOGEN */ + RF_REG_PAIR(4, 28, 0x18), + RF_REG_PAIR(4, 29, 0xee), + RF_REG_PAIR(4, 30, 0x6b), + RF_REG_PAIR(4, 31, 0x31), + RF_REG_PAIR(4, 32, 0x5d), + RF_REG_PAIR(4, 33, 0x00), /* reserved */ + /* TX */ + RF_REG_PAIR(4, 34, 0x96), + RF_REG_PAIR(4, 35, 0x55), + RF_REG_PAIR(4, 36, 0x08), + RF_REG_PAIR(4, 37, 0xbb), + RF_REG_PAIR(4, 38, 0xb3), + RF_REG_PAIR(4, 39, 0xb3), + RF_REG_PAIR(4, 40, 0x03), + RF_REG_PAIR(4, 41, 0x00), /* reserved */ + RF_REG_PAIR(4, 42, 0x00), /* reserved */ + RF_REG_PAIR(4, 43, 0xc5), + RF_REG_PAIR(4, 44, 0xc5), + RF_REG_PAIR(4, 45, 0xc5), + RF_REG_PAIR(4, 46, 0x07), + RF_REG_PAIR(4, 47, 0xa8), + RF_REG_PAIR(4, 48, 0xef), + RF_REG_PAIR(4, 49, 0x1a), + /* PA */ + RF_REG_PAIR(4, 54, 0x07), + RF_REG_PAIR(4, 55, 0xa7), + RF_REG_PAIR(4, 56, 0xcc), + RF_REG_PAIR(4, 57, 0x14), + RF_REG_PAIR(4, 58, 0x07), + RF_REG_PAIR(4, 59, 0xa8), + RF_REG_PAIR(4, 60, 0xd7), + RF_REG_PAIR(4, 61, 0x10), + RF_REG_PAIR(4, 62, 0x1c), + RF_REG_PAIR(4, 63, 0x00), /* reserved */ +}; + +static const struct mt76_reg_pair rf_vga[] = { + RF_REG_PAIR(5, 0, 0x47), + RF_REG_PAIR(5, 1, 0x00), + RF_REG_PAIR(5, 2, 0x00), + RF_REG_PAIR(5, 3, 0x08), + RF_REG_PAIR(5, 4, 0x04), + RF_REG_PAIR(5, 5, 0x20), + RF_REG_PAIR(5, 6, 0x3a), + RF_REG_PAIR(5, 7, 0x3a), + RF_REG_PAIR(5, 8, 0x00), + RF_REG_PAIR(5, 9, 0x00), + RF_REG_PAIR(5, 10, 0x10), + RF_REG_PAIR(5, 11, 0x10), + RF_REG_PAIR(5, 12, 0x10), + RF_REG_PAIR(5, 13, 0x10), + RF_REG_PAIR(5, 14, 0x10), + RF_REG_PAIR(5, 15, 0x20), + RF_REG_PAIR(5, 16, 0x22), + RF_REG_PAIR(5, 17, 0x7c), + RF_REG_PAIR(5, 18, 0x00), + RF_REG_PAIR(5, 19, 0x00), + RF_REG_PAIR(5, 20, 0x00), + RF_REG_PAIR(5, 21, 0xf1), + RF_REG_PAIR(5, 22, 0x11), + RF_REG_PAIR(5, 23, 0x02), + RF_REG_PAIR(5, 24, 0x41), + RF_REG_PAIR(5, 25, 0x20), + RF_REG_PAIR(5, 26, 0x00), + RF_REG_PAIR(5, 27, 0xd7), + RF_REG_PAIR(5, 28, 0xa2), + RF_REG_PAIR(5, 29, 0x20), + RF_REG_PAIR(5, 30, 0x49), + RF_REG_PAIR(5, 31, 0x20), + RF_REG_PAIR(5, 32, 0x04), + RF_REG_PAIR(5, 33, 0xf1), + RF_REG_PAIR(5, 34, 0xa1), + RF_REG_PAIR(5, 35, 0x01), + RF_REG_PAIR(5, 41, 0x00), + RF_REG_PAIR(5, 42, 0x00), + RF_REG_PAIR(5, 43, 0x00), + RF_REG_PAIR(5, 44, 0x00), + RF_REG_PAIR(5, 45, 0x00), + RF_REG_PAIR(5, 46, 0x00), + RF_REG_PAIR(5, 47, 0x00), + RF_REG_PAIR(5, 48, 0x00), + RF_REG_PAIR(5, 49, 0x00), + RF_REG_PAIR(5, 50, 0x00), + RF_REG_PAIR(5, 51, 0x00), + RF_REG_PAIR(5, 52, 0x00), + RF_REG_PAIR(5, 53, 0x00), + RF_REG_PAIR(5, 54, 0x00), + RF_REG_PAIR(5, 55, 0x00), + RF_REG_PAIR(5, 56, 0x00), + RF_REG_PAIR(5, 57, 0x00), + RF_REG_PAIR(5, 58, 0x31), + RF_REG_PAIR(5, 59, 0x31), + RF_REG_PAIR(5, 60, 0x0a), + RF_REG_PAIR(5, 61, 0x02), + RF_REG_PAIR(5, 62, 0x00), + RF_REG_PAIR(5, 63, 0x00), +}; + +/* TODO: BBP178 is set to 0xff for "CCK CH14 OBW" which overrides the settings + * from channel switching. Seems stupid at best. + */ +static const struct mt76_reg_pair bbp_high_temp[] = { + { 75, 0x60 }, + { 92, 0x02 }, + { 178, 0xff }, /* For CCK CH14 OBW */ + { 195, 0x88 }, { 196, 0x60 }, +}, bbp_high_temp_bw20[] = { + { 69, 0x12 }, + { 91, 0x07 }, + { 195, 0x23 }, { 196, 0x17 }, + { 195, 0x24 }, { 196, 0x06 }, + { 195, 0x81 }, { 196, 0x12 }, + { 195, 0x83 }, { 196, 0x17 }, +}, bbp_high_temp_bw40[] = { + { 69, 0x15 }, + { 91, 0x04 }, + { 195, 0x23 }, { 196, 0x12 }, + { 195, 0x24 }, { 196, 0x08 }, + { 195, 0x81 }, { 196, 0x15 }, + { 195, 0x83 }, { 196, 0x16 }, +}, bbp_low_temp[] = { + { 178, 0xff }, /* For CCK CH14 OBW */ +}, bbp_low_temp_bw20[] = { + { 69, 0x12 }, + { 75, 0x5e }, + { 91, 0x07 }, + { 92, 0x02 }, + { 195, 0x23 }, { 196, 0x17 }, + { 195, 0x24 }, { 196, 0x06 }, + { 195, 0x81 }, { 196, 0x12 }, + { 195, 0x83 }, { 196, 0x17 }, + { 195, 0x88 }, { 196, 0x5e }, +}, bbp_low_temp_bw40[] = { + { 69, 0x15 }, + { 75, 0x5c }, + { 91, 0x04 }, + { 92, 0x03 }, + { 195, 0x23 }, { 196, 0x10 }, + { 195, 0x24 }, { 196, 0x08 }, + { 195, 0x81 }, { 196, 0x15 }, + { 195, 0x83 }, { 196, 0x16 }, + { 195, 0x88 }, { 196, 0x5b }, +}, bbp_normal_temp[] = { + { 75, 0x60 }, + { 92, 0x02 }, + { 178, 0xff }, /* For CCK CH14 OBW */ + { 195, 0x88 }, { 196, 0x60 }, +}, bbp_normal_temp_bw20[] = { + { 69, 0x12 }, + { 91, 0x07 }, + { 195, 0x23 }, { 196, 0x17 }, + { 195, 0x24 }, { 196, 0x06 }, + { 195, 0x81 }, { 196, 0x12 }, + { 195, 0x83 }, { 196, 0x17 }, +}, bbp_normal_temp_bw40[] = { + { 69, 0x15 }, + { 91, 0x04 }, + { 195, 0x23 }, { 196, 0x12 }, + { 195, 0x24 }, { 196, 0x08 }, + { 195, 0x81 }, { 196, 0x15 }, + { 195, 0x83 }, { 196, 0x16 }, +}; + +#define BBP_TABLE(arr) { arr, ARRAY_SIZE(arr), } + +static const struct reg_table { + const struct mt76_reg_pair *regs; + size_t n; +} bbp_mode_table[3][3] = { + { + BBP_TABLE(bbp_normal_temp_bw20), + BBP_TABLE(bbp_normal_temp_bw40), + BBP_TABLE(bbp_normal_temp), + }, { + BBP_TABLE(bbp_high_temp_bw20), + BBP_TABLE(bbp_high_temp_bw40), + BBP_TABLE(bbp_high_temp), + }, { + BBP_TABLE(bbp_low_temp_bw20), + BBP_TABLE(bbp_low_temp_bw40), + BBP_TABLE(bbp_low_temp), + } +}; + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/mac.c b/drivers/net/wireless/mediatek/mt7601u/mac.c new file mode 100644 index 0000000..7514bce --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mac.c @@ -0,0 +1,573 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "trace.h" +#include + +static void +mt76_mac_process_tx_rate(struct ieee80211_tx_rate *txrate, u16 rate) +{ + u8 idx = MT76_GET(MT_TXWI_RATE_MCS, rate); + + txrate->idx = 0; + txrate->flags = 0; + txrate->count = 1; + + switch (MT76_GET(MT_TXWI_RATE_PHY_MODE, rate)) { + case MT_PHY_TYPE_OFDM: + txrate->idx = idx + 4; + return; + case MT_PHY_TYPE_CCK: + if (idx >= 8) + idx -= 8; + + txrate->idx = idx; + return; + case MT_PHY_TYPE_HT_GF: + txrate->flags |= IEEE80211_TX_RC_GREEN_FIELD; + /* fall through */ + case MT_PHY_TYPE_HT: + txrate->flags |= IEEE80211_TX_RC_MCS; + txrate->idx = idx; + break; + default: + WARN_ON(1); + return; + } + + if (MT76_GET(MT_TXWI_RATE_BW, rate) == MT_PHY_BW_40) + txrate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + + if (rate & MT_TXWI_RATE_SGI) + txrate->flags |= IEEE80211_TX_RC_SHORT_GI; +} + +static void +mt76_mac_fill_tx_status(struct mt7601u_dev *dev, struct ieee80211_tx_info *info, + struct mt76_tx_status *st) +{ + struct ieee80211_tx_rate *rate = info->status.rates; + int cur_idx, last_rate; + int i; + + last_rate = min_t(int, st->retry, IEEE80211_TX_MAX_RATES - 1); + mt76_mac_process_tx_rate(&rate[last_rate], st->rate); + if (last_rate < IEEE80211_TX_MAX_RATES - 1) + rate[last_rate + 1].idx = -1; + + cur_idx = rate[last_rate].idx + st->retry; + for (i = 0; i <= last_rate; i++) { + rate[i].flags = rate[last_rate].flags; + rate[i].idx = max_t(int, 0, cur_idx - i); + rate[i].count = 1; + } + + if (last_rate > 0) + rate[last_rate - 1].count = st->retry + 1 - last_rate; + + info->status.ampdu_len = 1; + info->status.ampdu_ack_len = st->success; + + if (st->is_probe) + info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; + + if (st->aggr) + info->flags |= IEEE80211_TX_CTL_AMPDU | + IEEE80211_TX_STAT_AMPDU; + + if (!st->ack_req) + info->flags |= IEEE80211_TX_CTL_NO_ACK; + else if (st->success) + info->flags |= IEEE80211_TX_STAT_ACK; +} + +u16 mt76_mac_tx_rate_val(struct mt7601u_dev *dev, + const struct ieee80211_tx_rate *rate, u8 *nss_val) +{ + u16 rateval; + u8 phy, rate_idx; + u8 nss = 1; + u8 bw = 0; + + if (rate->flags & IEEE80211_TX_RC_MCS) { + rate_idx = rate->idx; + nss = 1 + (rate->idx >> 3); + phy = MT_PHY_TYPE_HT; + if (rate->flags & IEEE80211_TX_RC_GREEN_FIELD) + phy = MT_PHY_TYPE_HT_GF; + if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + bw = 1; + } else { + const struct ieee80211_rate *r; + int band = dev->chandef.chan->band; + u16 val; + + r = &dev->hw->wiphy->bands[band]->bitrates[rate->idx]; + if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + val = r->hw_value_short; + else + val = r->hw_value; + + phy = val >> 8; + rate_idx = val & 0xff; + bw = 0; + } + + rateval = MT76_SET(MT_RXWI_RATE_MCS, rate_idx); + rateval |= MT76_SET(MT_RXWI_RATE_PHY, phy); + rateval |= MT76_SET(MT_RXWI_RATE_BW, bw); + if (rate->flags & IEEE80211_TX_RC_SHORT_GI) + rateval |= MT_RXWI_RATE_SGI; + + *nss_val = nss; + return rateval; +} + +void mt76_mac_wcid_set_rate(struct mt7601u_dev *dev, struct mt76_wcid *wcid, + const struct ieee80211_tx_rate *rate) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + wcid->tx_rate = mt76_mac_tx_rate_val(dev, rate, &wcid->tx_rate_nss); + wcid->tx_rate_set = true; + spin_unlock_irqrestore(&dev->lock, flags); +} + +struct mt76_tx_status mt7601u_mac_fetch_tx_status(struct mt7601u_dev *dev) +{ + struct mt76_tx_status stat = {}; + u32 val; + + val = mt7601u_rr(dev, MT_TX_STAT_FIFO); + stat.valid = !!(val & MT_TX_STAT_FIFO_VALID); + stat.success = !!(val & MT_TX_STAT_FIFO_SUCCESS); + stat.aggr = !!(val & MT_TX_STAT_FIFO_AGGR); + stat.ack_req = !!(val & MT_TX_STAT_FIFO_ACKREQ); + stat.pktid = MT76_GET(MT_TX_STAT_FIFO_PID_TYPE, val); + stat.wcid = MT76_GET(MT_TX_STAT_FIFO_WCID, val); + stat.rate = MT76_GET(MT_TX_STAT_FIFO_RATE, val); + + return stat; +} + +void mt76_send_tx_status(struct mt7601u_dev *dev, struct mt76_tx_status *stat) +{ + struct ieee80211_tx_info info = {}; + struct ieee80211_sta *sta = NULL; + struct mt76_wcid *wcid = NULL; + void *msta; + + rcu_read_lock(); + if (stat->wcid < ARRAY_SIZE(dev->wcid)) + wcid = rcu_dereference(dev->wcid[stat->wcid]); + + if (wcid) { + msta = container_of(wcid, struct mt76_sta, wcid); + sta = container_of(msta, struct ieee80211_sta, + drv_priv); + } + + mt76_mac_fill_tx_status(dev, &info, stat); + ieee80211_tx_status_noskb(dev->hw, sta, &info); + rcu_read_unlock(); +} + +void mt7601u_mac_set_protection(struct mt7601u_dev *dev, bool legacy_prot, + int ht_mode) +{ + int mode = ht_mode & IEEE80211_HT_OP_MODE_PROTECTION; + bool non_gf = !!(ht_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + u32 prot[6]; + bool ht_rts[4] = {}; + int i; + + prot[0] = MT_PROT_NAV_SHORT | + MT_PROT_TXOP_ALLOW_ALL | + MT_PROT_RTS_THR_EN; + prot[1] = prot[0]; + if (legacy_prot) + prot[1] |= MT_PROT_CTRL_CTS2SELF; + + prot[2] = prot[4] = MT_PROT_NAV_SHORT | MT_PROT_TXOP_ALLOW_BW20; + prot[3] = prot[5] = MT_PROT_NAV_SHORT | MT_PROT_TXOP_ALLOW_ALL; + + if (legacy_prot) { + prot[2] |= MT_PROT_RATE_CCK_11; + prot[3] |= MT_PROT_RATE_CCK_11; + prot[4] |= MT_PROT_RATE_CCK_11; + prot[5] |= MT_PROT_RATE_CCK_11; + } else { + prot[2] |= MT_PROT_RATE_OFDM_24; + prot[3] |= MT_PROT_RATE_DUP_OFDM_24; + prot[4] |= MT_PROT_RATE_OFDM_24; + prot[5] |= MT_PROT_RATE_DUP_OFDM_24; + } + + switch (mode) { + case IEEE80211_HT_OP_MODE_PROTECTION_NONE: + break; + + case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER: + ht_rts[0] = ht_rts[1] = ht_rts[2] = ht_rts[3] = true; + break; + + case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ: + ht_rts[1] = ht_rts[3] = true; + break; + + case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED: + ht_rts[0] = ht_rts[1] = ht_rts[2] = ht_rts[3] = true; + break; + } + + if (non_gf) + ht_rts[2] = ht_rts[3] = true; + + for (i = 0; i < 4; i++) + if (ht_rts[i]) + prot[i + 2] |= MT_PROT_CTRL_RTS_CTS; + + for (i = 0; i < 6; i++) + mt7601u_wr(dev, MT_CCK_PROT_CFG + i * 4, prot[i]); +} + +void mt7601u_mac_set_short_preamble(struct mt7601u_dev *dev, bool short_preamb) +{ + if (short_preamb) + mt76_set(dev, MT_AUTO_RSP_CFG, MT_AUTO_RSP_PREAMB_SHORT); + else + mt76_clear(dev, MT_AUTO_RSP_CFG, MT_AUTO_RSP_PREAMB_SHORT); +} + +void mt7601u_mac_config_tsf(struct mt7601u_dev *dev, bool enable, int interval) +{ + u32 val = mt7601u_rr(dev, MT_BEACON_TIME_CFG); + + val &= ~(MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | + MT_BEACON_TIME_CFG_TBTT_EN); + + if (!enable) { + mt7601u_wr(dev, MT_BEACON_TIME_CFG, val); + return; + } + + val &= ~MT_BEACON_TIME_CFG_INTVAL; + val |= MT76_SET(MT_BEACON_TIME_CFG_INTVAL, interval << 4) | + MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | + MT_BEACON_TIME_CFG_TBTT_EN; +} + +static void mt7601u_check_mac_err(struct mt7601u_dev *dev) +{ + u32 val = mt7601u_rr(dev, 0x10f4); + + if (!(val & BIT(29)) || !(val & (BIT(7) | BIT(5)))) + return; + + dev_err(dev->dev, "Error: MAC specific condition occurred\n"); + + mt76_set(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_RESET_CSR); + udelay(10); + mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_RESET_CSR); +} + +void mt7601u_mac_work(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + mac_work.work); + struct { + u32 addr_base; + u32 span; + u64 *stat_base; + } spans[] = { + { MT_RX_STA_CNT0, 3, dev->stats.rx_stat }, + { MT_TX_STA_CNT0, 3, dev->stats.tx_stat }, + { MT_TX_AGG_STAT, 1, dev->stats.aggr_stat }, + { MT_MPDU_DENSITY_CNT, 1, dev->stats.zero_len_del }, + { MT_TX_AGG_CNT_BASE0, 8, &dev->stats.aggr_n[0] }, + { MT_TX_AGG_CNT_BASE1, 8, &dev->stats.aggr_n[16] }, + }; + u32 sum, n; + int i, j, k; + + /* Note: using MCU_RANDOM_READ is actually slower then reading all the + * registers by hand. MCU takes ca. 20ms to complete read of 24 + * registers while reading them one by one will takes roughly + * 24*200us =~ 5ms. + */ + + k = 0; + n = 0; + sum = 0; + for (i = 0; i < ARRAY_SIZE(spans); i++) + for (j = 0; j < spans[i].span; j++) { + u32 val = mt7601u_rr(dev, spans[i].addr_base + j * 4); + + spans[i].stat_base[j * 2] += val & 0xffff; + spans[i].stat_base[j * 2 + 1] += val >> 16; + + /* Calculate average AMPDU length */ + if (spans[i].addr_base != MT_TX_AGG_CNT_BASE0 && + spans[i].addr_base != MT_TX_AGG_CNT_BASE1) + continue; + + n += (val >> 16) + (val & 0xffff); + sum += (val & 0xffff) * (1 + k * 2) + + (val >> 16) * (2 + k * 2); + k++; + } + + atomic_set(&dev->avg_ampdu_len, n ? DIV_ROUND_CLOSEST(sum, n) : 1); + + mt7601u_check_mac_err(dev); + + ieee80211_queue_delayed_work(dev->hw, &dev->mac_work, 10 * HZ); +} + +void +mt7601u_mac_wcid_setup(struct mt7601u_dev *dev, u8 idx, u8 vif_idx, u8 *mac) +{ + u8 zmac[ETH_ALEN] = {}; + u32 attr; + + attr = MT76_SET(MT_WCID_ATTR_BSS_IDX, vif_idx & 7) | + MT76_SET(MT_WCID_ATTR_BSS_IDX_EXT, !!(vif_idx & 8)); + + mt76_wr(dev, MT_WCID_ATTR(idx), attr); + + if (mac) + memcpy(zmac, mac, sizeof(zmac)); + + mt7601u_addr_wr(dev, MT_WCID_ADDR(idx), zmac); +} + +void mt7601u_mac_set_ampdu_factor(struct mt7601u_dev *dev) +{ + struct ieee80211_sta *sta; + struct mt76_wcid *wcid; + void *msta; + u8 min_factor = 3; + int i; + + rcu_read_lock(); + for (i = 0; i < ARRAY_SIZE(dev->wcid); i++) { + wcid = rcu_dereference(dev->wcid[i]); + if (!wcid) + continue; + + msta = container_of(wcid, struct mt76_sta, wcid); + sta = container_of(msta, struct ieee80211_sta, drv_priv); + + min_factor = min(min_factor, sta->ht_cap.ampdu_factor); + } + rcu_read_unlock(); + + mt7601u_wr(dev, MT_MAX_LEN_CFG, 0xa0fff | + MT76_SET(MT_MAX_LEN_CFG_AMPDU, min_factor)); +} + +static void +mt76_mac_process_rate(struct ieee80211_rx_status *status, u16 rate) +{ + u8 idx = MT76_GET(MT_RXWI_RATE_MCS, rate); + + switch (MT76_GET(MT_RXWI_RATE_PHY, rate)) { + case MT_PHY_TYPE_OFDM: + if (WARN_ON(idx >= 8)) + idx = 0; + idx += 4; + + status->rate_idx = idx; + return; + case MT_PHY_TYPE_CCK: + if (idx >= 8) { + idx -= 8; + status->flag |= RX_FLAG_SHORTPRE; + } + + if (WARN_ON(idx >= 4)) + idx = 0; + + status->rate_idx = idx; + return; + case MT_PHY_TYPE_HT_GF: + status->flag |= RX_FLAG_HT_GF; + /* fall through */ + case MT_PHY_TYPE_HT: + status->flag |= RX_FLAG_HT; + status->rate_idx = idx; + break; + default: + WARN_ON(1); + return; + } + + if (rate & MT_RXWI_RATE_SGI) + status->flag |= RX_FLAG_SHORT_GI; + + if (rate & MT_RXWI_RATE_STBC) + status->flag |= 1 << RX_FLAG_STBC_SHIFT; + + if (rate & MT_RXWI_RATE_BW) + status->flag |= RX_FLAG_40MHZ; +} + +static void +mt7601u_rx_monitor_beacon(struct mt7601u_dev *dev, struct mt7601u_rxwi *rxwi, + u16 rate, int rssi) +{ + dev->bcn_freq_off = rxwi->freq_off; + dev->bcn_phy_mode = MT76_GET(MT_RXWI_RATE_PHY, rate); + dev->avg_rssi = (dev->avg_rssi * 15) / 16 + (rssi << 8); +} + +static int +mt7601u_rx_is_our_beacon(struct mt7601u_dev *dev, u8 *data) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)data; + + return ieee80211_is_beacon(hdr->frame_control) && + ether_addr_equal(hdr->addr2, dev->ap_bssid); +} + +u32 mt76_mac_process_rx(struct mt7601u_dev *dev, struct sk_buff *skb, + u8 *data, void *rxi) +{ + struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); + struct mt7601u_rxwi *rxwi = rxi; + u32 len, ctl = le32_to_cpu(rxwi->ctl); + u16 rate = le16_to_cpu(rxwi->rate); + int rssi; + + len = MT76_GET(MT_RXWI_CTL_MPDU_LEN, ctl); + if (len < 10) + return 0; + + if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_DECRYPT)) { + status->flag |= RX_FLAG_DECRYPTED; + status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; + } + + status->chains = BIT(0); + rssi = mt7601u_phy_get_rssi(dev, rxwi, rate); + status->chain_signal[0] = status->signal = rssi; + status->freq = dev->chandef.chan->center_freq; + status->band = dev->chandef.chan->band; + + mt76_mac_process_rate(status, rate); + + spin_lock_bh(&dev->con_mon_lock); + if (mt7601u_rx_is_our_beacon(dev, data)) + mt7601u_rx_monitor_beacon(dev, rxwi, rate, rssi); + else if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_U2M)) + dev->avg_rssi = (dev->avg_rssi * 15) / 16 + (rssi << 8); + spin_unlock_bh(&dev->con_mon_lock); + + return len; +} + +static enum mt76_cipher_type +mt76_mac_get_key_info(struct ieee80211_key_conf *key, u8 *key_data) +{ + memset(key_data, 0, 32); + if (!key) + return MT_CIPHER_NONE; + + if (key->keylen > 32) + return MT_CIPHER_NONE; + + memcpy(key_data, key->key, key->keylen); + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + return MT_CIPHER_WEP40; + case WLAN_CIPHER_SUITE_WEP104: + return MT_CIPHER_WEP104; + case WLAN_CIPHER_SUITE_TKIP: + return MT_CIPHER_TKIP; + case WLAN_CIPHER_SUITE_CCMP: + return MT_CIPHER_AES_CCMP; + default: + return MT_CIPHER_NONE; + } +} + +int mt76_mac_wcid_set_key(struct mt7601u_dev *dev, u8 idx, + struct ieee80211_key_conf *key) +{ + enum mt76_cipher_type cipher; + u8 key_data[32]; + u8 iv_data[8]; + u32 val; + + cipher = mt76_mac_get_key_info(key, key_data); + if (cipher == MT_CIPHER_NONE && key) + return -EINVAL; + + trace_set_key(dev, idx); + + mt7601u_wr_copy(dev, MT_WCID_KEY(idx), key_data, sizeof(key_data)); + + memset(iv_data, 0, sizeof(iv_data)); + if (key) { + iv_data[3] = key->keyidx << 6; + if (cipher >= MT_CIPHER_TKIP) { + /* Note: start with 1 to comply with spec, + * (see comment on common/cmm_wpa.c:4291). + */ + iv_data[0] |= 1; + iv_data[3] |= 0x20; + } + } + mt7601u_wr_copy(dev, MT_WCID_IV(idx), iv_data, sizeof(iv_data)); + + val = mt7601u_rr(dev, MT_WCID_ATTR(idx)); + val &= ~MT_WCID_ATTR_PKEY_MODE & ~MT_WCID_ATTR_PKEY_MODE_EXT; + val |= MT76_SET(MT_WCID_ATTR_PKEY_MODE, cipher & 7) | + MT76_SET(MT_WCID_ATTR_PKEY_MODE_EXT, cipher >> 3); + val &= ~MT_WCID_ATTR_PAIRWISE; + val |= MT_WCID_ATTR_PAIRWISE * + !!(key && key->flags & IEEE80211_KEY_FLAG_PAIRWISE); + mt7601u_wr(dev, MT_WCID_ATTR(idx), val); + + return 0; +} + +int mt76_mac_shared_key_setup(struct mt7601u_dev *dev, u8 vif_idx, u8 key_idx, + struct ieee80211_key_conf *key) +{ + enum mt76_cipher_type cipher; + u8 key_data[32]; + u32 val; + + cipher = mt76_mac_get_key_info(key, key_data); + if (cipher == MT_CIPHER_NONE && key) + return -EINVAL; + + trace_set_shared_key(dev, vif_idx, key_idx); + + mt7601u_wr_copy(dev, MT_SKEY(vif_idx, key_idx), + key_data, sizeof(key_data)); + + val = mt76_rr(dev, MT_SKEY_MODE(vif_idx)); + val &= ~(MT_SKEY_MODE_MASK << MT_SKEY_MODE_SHIFT(vif_idx, key_idx)); + val |= cipher << MT_SKEY_MODE_SHIFT(vif_idx, key_idx); + mt76_wr(dev, MT_SKEY_MODE(vif_idx), val); + + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/mac.h b/drivers/net/wireless/mediatek/mt7601u/mac.h new file mode 100644 index 0000000..2c22d63 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mac.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT76_MAC_H +#define __MT76_MAC_H + +struct mt76_tx_status { + u8 valid:1; + u8 success:1; + u8 aggr:1; + u8 ack_req:1; + u8 is_probe:1; + u8 wcid; + u8 pktid; + u8 retry; + u16 rate; +} __packed __aligned(2); + +/* Note: values in original "RSSI" and "SNR" fields are not actually what they + * are called for MT7601U, names used by this driver are educated guesses + * (see vendor mac/ral_omac.c). + */ +struct mt7601u_rxwi { + __le32 rxinfo; + + __le32 ctl; + + __le16 frag_sn; + __le16 rate; + + u8 unknown; + u8 zero[3]; + + u8 snr; + u8 ant; + u8 gain; + u8 freq_off; + + __le32 resv2; + __le32 expert_ant; +} __packed __aligned(4); + +#define MT_RXINFO_BA BIT(0) +#define MT_RXINFO_DATA BIT(1) +#define MT_RXINFO_NULL BIT(2) +#define MT_RXINFO_FRAG BIT(3) +#define MT_RXINFO_U2M BIT(4) +#define MT_RXINFO_MULTICAST BIT(5) +#define MT_RXINFO_BROADCAST BIT(6) +#define MT_RXINFO_MYBSS BIT(7) +#define MT_RXINFO_CRCERR BIT(8) +#define MT_RXINFO_ICVERR BIT(9) +#define MT_RXINFO_MICERR BIT(10) +#define MT_RXINFO_AMSDU BIT(11) +#define MT_RXINFO_HTC BIT(12) +#define MT_RXINFO_RSSI BIT(13) +#define MT_RXINFO_L2PAD BIT(14) +#define MT_RXINFO_AMPDU BIT(15) +#define MT_RXINFO_DECRYPT BIT(16) +#define MT_RXINFO_BSSIDX3 BIT(17) +#define MT_RXINFO_WAPI_KEY BIT(18) +#define MT_RXINFO_PN_LEN GENMASK(21, 19) +#define MT_RXINFO_SW_PKT_80211 BIT(22) +#define MT_RXINFO_TCP_SUM_BYPASS BIT(28) +#define MT_RXINFO_IP_SUM_BYPASS BIT(29) +#define MT_RXINFO_TCP_SUM_ERR BIT(30) +#define MT_RXINFO_IP_SUM_ERR BIT(31) + +#define MT_RXWI_CTL_WCID GENMASK(7, 0) +#define MT_RXWI_CTL_KEY_IDX GENMASK(9, 8) +#define MT_RXWI_CTL_BSS_IDX GENMASK(12, 10) +#define MT_RXWI_CTL_UDF GENMASK(15, 13) +#define MT_RXWI_CTL_MPDU_LEN GENMASK(27, 16) +#define MT_RXWI_CTL_TID GENMASK(31, 28) + +#define MT_RXWI_FRAG GENMASK(3, 0) +#define MT_RXWI_SN GENMASK(15, 4) + +#define MT_RXWI_RATE_MCS GENMASK(6, 0) +#define MT_RXWI_RATE_BW BIT(7) +#define MT_RXWI_RATE_SGI BIT(8) +#define MT_RXWI_RATE_STBC GENMASK(10, 9) +#define MT_RXWI_RATE_ETXBF BIT(11) +#define MT_RXWI_RATE_SND BIT(12) +#define MT_RXWI_RATE_ITXBF BIT(13) +#define MT_RXWI_RATE_PHY GENMASK(15, 14) + +#define MT_RXWI_GAIN_RSSI_VAL GENMASK(5, 0) +#define MT_RXWI_GAIN_RSSI_LNA_ID GENMASK(7, 6) +#define MT_RXWI_ANT_AUX_LNA BIT(7) + +#define MT_RXWI_EANT_ENC_ANT_ID GENMASK(7, 0) + +enum mt76_phy_type { + MT_PHY_TYPE_CCK, + MT_PHY_TYPE_OFDM, + MT_PHY_TYPE_HT, + MT_PHY_TYPE_HT_GF, +}; + +enum mt76_phy_bandwidth { + MT_PHY_BW_20, + MT_PHY_BW_40, +}; + +struct mt76_txwi { + __le16 flags; + __le16 rate_ctl; + + u8 ack_ctl; + u8 wcid; + __le16 len_ctl; + + __le32 iv; + + __le32 eiv; + + u8 aid; + u8 txstream; + __le16 ctl; +} __packed __aligned(4); + +#define MT_TXWI_FLAGS_FRAG BIT(0) +#define MT_TXWI_FLAGS_MMPS BIT(1) +#define MT_TXWI_FLAGS_CFACK BIT(2) +#define MT_TXWI_FLAGS_TS BIT(3) +#define MT_TXWI_FLAGS_AMPDU BIT(4) +#define MT_TXWI_FLAGS_MPDU_DENSITY GENMASK(7, 5) +#define MT_TXWI_FLAGS_TXOP GENMASK(9, 8) +#define MT_TXWI_FLAGS_CWMIN GENMASK(12, 10) +#define MT_TXWI_FLAGS_NO_RATE_FALLBACK BIT(13) +#define MT_TXWI_FLAGS_TX_RPT BIT(14) +#define MT_TXWI_FLAGS_TX_RATE_LUT BIT(15) + +#define MT_TXWI_RATE_MCS GENMASK(6, 0) +#define MT_TXWI_RATE_BW BIT(7) +#define MT_TXWI_RATE_SGI BIT(8) +#define MT_TXWI_RATE_STBC GENMASK(10, 9) +#define MT_TXWI_RATE_PHY_MODE GENMASK(15, 14) + +#define MT_TXWI_ACK_CTL_REQ BIT(0) +#define MT_TXWI_ACK_CTL_NSEQ BIT(1) +#define MT_TXWI_ACK_CTL_BA_WINDOW GENMASK(7, 2) + +#define MT_TXWI_LEN_BYTE_CNT GENMASK(11, 0) +#define MT_TXWI_LEN_PKTID GENMASK(15, 12) + +#define MT_TXWI_CTL_TX_POWER_ADJ GENMASK(3, 0) +#define MT_TXWI_CTL_CHAN_CHECK_PKT BIT(4) +#define MT_TXWI_CTL_PIFS_REV BIT(6) + +u32 mt76_mac_process_rx(struct mt7601u_dev *dev, struct sk_buff *skb, + u8 *data, void *rxi); +int mt76_mac_wcid_set_key(struct mt7601u_dev *dev, u8 idx, + struct ieee80211_key_conf *key); +void mt76_mac_wcid_set_rate(struct mt7601u_dev *dev, struct mt76_wcid *wcid, + const struct ieee80211_tx_rate *rate); + +int mt76_mac_shared_key_setup(struct mt7601u_dev *dev, u8 vif_idx, u8 key_idx, + struct ieee80211_key_conf *key); +u16 mt76_mac_tx_rate_val(struct mt7601u_dev *dev, + const struct ieee80211_tx_rate *rate, u8 *nss_val); +struct mt76_tx_status +mt7601u_mac_fetch_tx_status(struct mt7601u_dev *dev); +void mt76_send_tx_status(struct mt7601u_dev *dev, struct mt76_tx_status *stat); + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/main.c b/drivers/net/wireless/mediatek/mt7601u/main.c new file mode 100644 index 0000000..169384b --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/main.c @@ -0,0 +1,413 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "mac.h" +#include +#include + +static int mt7601u_start(struct ieee80211_hw *hw) +{ + struct mt7601u_dev *dev = hw->priv; + int ret; + + mutex_lock(&dev->mutex); + + ret = mt7601u_mac_start(dev); + if (ret) + goto out; + + ieee80211_queue_delayed_work(dev->hw, &dev->mac_work, + MT_CALIBRATE_INTERVAL); + ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, + MT_CALIBRATE_INTERVAL); +out: + mutex_unlock(&dev->mutex); + return ret; +} + +static void mt7601u_stop(struct ieee80211_hw *hw) +{ + struct mt7601u_dev *dev = hw->priv; + + mutex_lock(&dev->mutex); + + cancel_delayed_work_sync(&dev->cal_work); + cancel_delayed_work_sync(&dev->mac_work); + mt7601u_mac_stop(dev); + + mutex_unlock(&dev->mutex); +} + +static int mt7601u_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv; + unsigned int idx = 0; + unsigned int wcid = GROUP_WCID(idx); + + /* Note: for AP do the AP-STA things mt76 does: + * - beacon offsets + * - do mac address tricks + * - shift vif idx + */ + mvif->idx = idx; + + if (dev->wcid_mask[wcid / BITS_PER_LONG] & BIT(wcid % BITS_PER_LONG)) + return -ENOSPC; + dev->wcid_mask[wcid / BITS_PER_LONG] |= BIT(wcid % BITS_PER_LONG); + mvif->group_wcid.idx = wcid; + mvif->group_wcid.hw_key_idx = -1; + + return 0; +} + +static void mt7601u_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv; + unsigned int wcid = mvif->group_wcid.idx; + + dev->wcid_mask[wcid / BITS_PER_LONG] &= ~BIT(wcid % BITS_PER_LONG); +} + +static int mt7601u_config(struct ieee80211_hw *hw, u32 changed) +{ + struct mt7601u_dev *dev = hw->priv; + int ret = 0; + + mutex_lock(&dev->mutex); + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + ieee80211_stop_queues(hw); + ret = mt7601u_phy_set_channel(dev, &hw->conf.chandef); + ieee80211_wake_queues(hw); + } + + mutex_unlock(&dev->mutex); + + return ret; +} + +static void +mt76_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, + unsigned int *total_flags, u64 multicast) +{ + struct mt7601u_dev *dev = hw->priv; + u32 flags = 0; + +#define MT76_FILTER(_flag, _hw) do { \ + flags |= *total_flags & FIF_##_flag; \ + dev->rxfilter &= ~(_hw); \ + dev->rxfilter |= !(flags & FIF_##_flag) * (_hw); \ + } while (0) + + mutex_lock(&dev->mutex); + + dev->rxfilter &= ~MT_RX_FILTR_CFG_OTHER_BSS; + + MT76_FILTER(OTHER_BSS, MT_RX_FILTR_CFG_PROMISC); + MT76_FILTER(FCSFAIL, MT_RX_FILTR_CFG_CRC_ERR); + MT76_FILTER(PLCPFAIL, MT_RX_FILTR_CFG_PHY_ERR); + MT76_FILTER(CONTROL, MT_RX_FILTR_CFG_ACK | + MT_RX_FILTR_CFG_CTS | + MT_RX_FILTR_CFG_CFEND | + MT_RX_FILTR_CFG_CFACK | + MT_RX_FILTR_CFG_BA | + MT_RX_FILTR_CFG_CTRL_RSV); + MT76_FILTER(PSPOLL, MT_RX_FILTR_CFG_PSPOLL); + + *total_flags = flags; + mt76_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter); + + mutex_unlock(&dev->mutex); +} + +static void +mt7601u_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, u32 changed) +{ + struct mt7601u_dev *dev = hw->priv; + + mutex_lock(&dev->mutex); + + if (changed & BSS_CHANGED_ASSOC) + mt7601u_phy_con_cal_onoff(dev, info); + + if (changed & BSS_CHANGED_BSSID) { + mt7601u_addr_wr(dev, MT_MAC_BSSID_DW0, info->bssid); + + /* Note: this is a hack because beacon_int is not changed + * on leave nor is any more appropriate event generated. + * rt2x00 doesn't seem to be bothered though. + */ + if (is_zero_ether_addr(info->bssid)) + mt7601u_mac_config_tsf(dev, false, 0); + } + + if (changed & BSS_CHANGED_BASIC_RATES) { + mt7601u_wr(dev, MT_LEGACY_BASIC_RATE, info->basic_rates); + mt7601u_wr(dev, MT_HT_FBK_CFG0, 0x65432100); + mt7601u_wr(dev, MT_HT_FBK_CFG1, 0xedcba980); + mt7601u_wr(dev, MT_LG_FBK_CFG0, 0xedcba988); + mt7601u_wr(dev, MT_LG_FBK_CFG1, 0x00002100); + } + + if (changed & BSS_CHANGED_BEACON_INT) + mt7601u_mac_config_tsf(dev, true, info->beacon_int); + + if (changed & BSS_CHANGED_HT || changed & BSS_CHANGED_ERP_CTS_PROT) + mt7601u_mac_set_protection(dev, info->use_cts_prot, + info->ht_operation_mode); + + if (changed & BSS_CHANGED_ERP_PREAMBLE) + mt7601u_mac_set_short_preamble(dev, info->use_short_preamble); + + if (changed & BSS_CHANGED_ERP_SLOT) { + int slottime = info->use_short_slot ? 9 : 20; + + mt76_rmw_field(dev, MT_BKOFF_SLOT_CFG, + MT_BKOFF_SLOT_CFG_SLOTTIME, slottime); + } + + if (changed & BSS_CHANGED_ASSOC) + mt7601u_phy_recalibrate_after_assoc(dev); + + mutex_unlock(&dev->mutex); +} + +static int +mt76_wcid_alloc(struct mt7601u_dev *dev) +{ + int i, idx = 0; + + for (i = 0; i < ARRAY_SIZE(dev->wcid_mask); i++) { + idx = ffs(~dev->wcid_mask[i]); + if (!idx) + continue; + + idx--; + dev->wcid_mask[i] |= BIT(idx); + break; + } + + idx = i * BITS_PER_LONG + idx; + if (idx > 119) + return -1; + + return idx; +} + +static int +mt7601u_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv; + struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv; + int ret = 0; + int idx = 0; + + mutex_lock(&dev->mutex); + + idx = mt76_wcid_alloc(dev); + if (idx < 0) { + ret = -ENOSPC; + goto out; + } + + msta->wcid.idx = idx; + msta->wcid.hw_key_idx = -1; + mt7601u_mac_wcid_setup(dev, idx, mvif->idx, sta->addr); + mt76_clear(dev, MT_WCID_DROP(idx), MT_WCID_DROP_MASK(idx)); + rcu_assign_pointer(dev->wcid[idx], &msta->wcid); + mt7601u_mac_set_ampdu_factor(dev); + +out: + mutex_unlock(&dev->mutex); + + return ret; +} + +static int +mt7601u_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv; + int idx = msta->wcid.idx; + + mutex_lock(&dev->mutex); + rcu_assign_pointer(dev->wcid[idx], NULL); + mt76_set(dev, MT_WCID_DROP(idx), MT_WCID_DROP_MASK(idx)); + dev->wcid_mask[idx / BITS_PER_LONG] &= ~BIT(idx % BITS_PER_LONG); + mt7601u_mac_wcid_setup(dev, idx, 0, NULL); + mt7601u_mac_set_ampdu_factor(dev); + mutex_unlock(&dev->mutex); + + return 0; +} + +static void +mt7601u_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, struct ieee80211_sta *sta) +{ +} + +static void +mt7601u_sw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *mac_addr) +{ + struct mt7601u_dev *dev = hw->priv; + + mt7601u_agc_save(dev); + set_bit(MT7601U_STATE_SCANNING, &dev->state); +} + +static void +mt7601u_sw_scan_complete(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct mt7601u_dev *dev = hw->priv; + + mt7601u_agc_restore(dev); + clear_bit(MT7601U_STATE_SCANNING, &dev->state); +} + +static int +mt7601u_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv; + struct mt76_sta *msta = sta ? (struct mt76_sta *) sta->drv_priv : NULL; + struct mt76_wcid *wcid = msta ? &msta->wcid : &mvif->group_wcid; + int idx = key->keyidx; + int ret; + + if (cmd == SET_KEY) { + key->hw_key_idx = wcid->idx; + wcid->hw_key_idx = idx; + } else { + if (idx == wcid->hw_key_idx) + wcid->hw_key_idx = -1; + + key = NULL; + } + + if (!msta) { + if (key || wcid->hw_key_idx == idx) { + ret = mt76_mac_wcid_set_key(dev, wcid->idx, key); + if (ret) + return ret; + } + + return mt76_mac_shared_key_setup(dev, mvif->idx, idx, key); + } + + return mt76_mac_wcid_set_key(dev, msta->wcid.idx, key); +} + +static int mt7601u_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct mt7601u_dev *dev = hw->priv; + + mt76_rmw_field(dev, MT_TX_RTS_CFG, MT_TX_RTS_CFG_THRESH, value); + + return 0; +} + +static int +mt76_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, u16 tid, u16 *ssn, u8 buf_size) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv; + + WARN_ON(msta->wcid.idx > GROUP_WCID(0)); + + switch (action) { + case IEEE80211_AMPDU_RX_START: + mt76_set(dev, MT_WCID_ADDR(msta->wcid.idx) + 4, BIT(16 + tid)); + break; + case IEEE80211_AMPDU_RX_STOP: + mt76_clear(dev, MT_WCID_ADDR(msta->wcid.idx) + 4, + BIT(16 + tid)); + break; + case IEEE80211_AMPDU_TX_OPERATIONAL: + ieee80211_send_bar(vif, sta->addr, tid, msta->agg_ssn[tid]); + break; + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + break; + case IEEE80211_AMPDU_TX_START: + msta->agg_ssn[tid] = *ssn << 4; + ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + case IEEE80211_AMPDU_TX_STOP_CONT: + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + } + + return 0; +} + +static void +mt76_sta_rate_tbl_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv; + struct ieee80211_sta_rates *rates; + struct ieee80211_tx_rate rate = {}; + + rcu_read_lock(); + rates = rcu_dereference(sta->rates); + + if (!rates) + goto out; + + rate.idx = rates->rate[0].idx; + rate.flags = rates->rate[0].flags; + mt76_mac_wcid_set_rate(dev, &msta->wcid, &rate); + +out: + rcu_read_unlock(); +} + +const struct ieee80211_ops mt7601u_ops = { + .tx = mt7601u_tx, + .start = mt7601u_start, + .stop = mt7601u_stop, + .add_interface = mt7601u_add_interface, + .remove_interface = mt7601u_remove_interface, + .config = mt7601u_config, + .configure_filter = mt76_configure_filter, + .bss_info_changed = mt7601u_bss_info_changed, + .sta_add = mt7601u_sta_add, + .sta_remove = mt7601u_sta_remove, + .sta_notify = mt7601u_sta_notify, + .set_key = mt7601u_set_key, + .conf_tx = mt7601u_conf_tx, + .sw_scan_start = mt7601u_sw_scan, + .sw_scan_complete = mt7601u_sw_scan_complete, + .ampdu_action = mt76_ampdu_action, + .sta_rate_tbl_update = mt76_sta_rate_tbl_update, + .set_rts_threshold = mt7601u_set_rts_threshold, +}; diff --git a/drivers/net/wireless/mediatek/mt7601u/mcu.c b/drivers/net/wireless/mediatek/mt7601u/mcu.c new file mode 100644 index 0000000..fbb1986 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mcu.c @@ -0,0 +1,534 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include "mt7601u.h" +#include "dma.h" +#include "mcu.h" +#include "usb.h" +#include "trace.h" + +#define MCU_FW_URB_MAX_PAYLOAD 0x3800 +#define MCU_FW_URB_SIZE (MCU_FW_URB_MAX_PAYLOAD + 12) +#define MCU_RESP_URB_SIZE 1024 + +static inline int firmware_running(struct mt7601u_dev *dev) +{ + return mt7601u_rr(dev, MT_MCU_COM_REG0) == 1; +} + +static inline void skb_put_le32(struct sk_buff *skb, u32 val) +{ + put_unaligned_le32(val, skb_put(skb, 4)); +} + +static inline void mt7601u_dma_skb_wrap_cmd(struct sk_buff *skb, + u8 seq, enum mcu_cmd cmd) +{ + WARN_ON(mt7601u_dma_skb_wrap(skb, CPU_TX_PORT, DMA_COMMAND, + MT76_SET(MT_TXD_CMD_INFO_SEQ, seq) | + MT76_SET(MT_TXD_CMD_INFO_TYPE, cmd))); +} + +static inline void trace_mt_mcu_msg_send_cs(struct mt7601u_dev *dev, + struct sk_buff *skb, bool need_resp) +{ + u32 i, csum = 0; + + for (i = 0; i < skb->len / 4; i++) + csum ^= get_unaligned_le32(skb->data + i * 4); + + trace_mt_mcu_msg_send(dev, skb, csum, need_resp); +} + +static struct sk_buff * +mt7601u_mcu_msg_alloc(struct mt7601u_dev *dev, const void *data, int len) +{ + struct sk_buff *skb; + + WARN_ON(len % 4); /* if length is not divisible by 4 we need to pad */ + + skb = alloc_skb(len + MT_DMA_HDR_LEN + 4, GFP_KERNEL); + skb_reserve(skb, MT_DMA_HDR_LEN); + memcpy(skb_put(skb, len), data, len); + + return skb; +} + +static int mt7601u_mcu_wait_resp(struct mt7601u_dev *dev, u8 seq) +{ + struct urb *urb = dev->mcu.resp.urb; + u32 rxfce; + int urb_status, ret, i = 5; + + while (i--) { + if (!wait_for_completion_timeout(&dev->mcu.resp_cmpl, + msecs_to_jiffies(300))) { + dev_warn(dev->dev, "Warning: %s retrying\n", __func__); + continue; + } + + /* Make copies of important data before reusing the urb */ + rxfce = get_unaligned_le32(dev->mcu.resp.buf); + urb_status = urb->status * mt7601u_urb_has_error(urb); + + ret = mt7601u_usb_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP, + &dev->mcu.resp, GFP_KERNEL, + mt7601u_complete_urb, + &dev->mcu.resp_cmpl); + if (ret) + return ret; + + if (urb_status) + dev_err(dev->dev, "Error: MCU resp urb failed:%d\n", + urb_status); + + if (MT76_GET(MT_RXD_CMD_INFO_CMD_SEQ, rxfce) == seq && + MT76_GET(MT_RXD_CMD_INFO_EVT_TYPE, rxfce) == CMD_DONE) + return 0; + + dev_err(dev->dev, "Error: MCU resp evt:%hhx seq:%hhx-%hhx!\n", + MT76_GET(MT_RXD_CMD_INFO_EVT_TYPE, rxfce), + seq, MT76_GET(MT_RXD_CMD_INFO_CMD_SEQ, rxfce)); + } + + dev_err(dev->dev, "Error: %s timed out\n", __func__); + return -ETIMEDOUT; +} + +static int +mt7601u_mcu_msg_send(struct mt7601u_dev *dev, struct sk_buff *skb, + enum mcu_cmd cmd, bool wait_resp) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + unsigned cmd_pipe = usb_sndbulkpipe(usb_dev, + dev->out_eps[MT_EP_OUT_INBAND_CMD]); + int sent, ret; + u8 seq = 0; + + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0; + + mutex_lock(&dev->mcu.mutex); + + if (wait_resp) + while (!seq) + seq = ++dev->mcu.msg_seq & 0xf; + + mt7601u_dma_skb_wrap_cmd(skb, seq, cmd); + + if (dev->mcu.resp_cmpl.done) + dev_err(dev->dev, "Error: MCU response pre-completed!\n"); + + trace_mt_mcu_msg_send_cs(dev, skb, wait_resp); + trace_mt_submit_urb_sync(dev, cmd_pipe, skb->len); + ret = usb_bulk_msg(usb_dev, cmd_pipe, skb->data, skb->len, &sent, 500); + if (ret) { + dev_err(dev->dev, "Error: send MCU cmd failed:%d\n", ret); + goto out; + } + if (sent != skb->len) + dev_err(dev->dev, "Error: %s sent != skb->len\n", __func__); + + if (wait_resp) + ret = mt7601u_mcu_wait_resp(dev, seq); +out: + mutex_unlock(&dev->mcu.mutex); + + consume_skb(skb); + + return ret; +} + +static int mt7601u_mcu_function_select(struct mt7601u_dev *dev, + enum mcu_function func, u32 val) +{ + struct sk_buff *skb; + struct { + __le32 id; + __le32 value; + } __packed __aligned(4) msg = { + .id = cpu_to_le32(func), + .value = cpu_to_le32(val), + }; + + skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg)); + return mt7601u_mcu_msg_send(dev, skb, CMD_FUN_SET_OP, func == 5); +} + +int mt7601u_mcu_tssi_read_kick(struct mt7601u_dev *dev, int use_hvga) +{ + int ret; + + if (!test_bit(MT7601U_STATE_MCU_RUNNING, &dev->state)) + return 0; + + ret = mt7601u_mcu_function_select(dev, ATOMIC_TSSI_SETTING, + use_hvga); + if (ret) { + dev_warn(dev->dev, "Warning: MCU TSSI read kick failed\n"); + return ret; + } + + dev->tssi_read_trig = true; + + return 0; +} + +int +mt7601u_mcu_calibrate(struct mt7601u_dev *dev, enum mcu_calibrate cal, u32 val) +{ + struct sk_buff *skb; + struct { + __le32 id; + __le32 value; + } __packed __aligned(4) msg = { + .id = cpu_to_le32(cal), + .value = cpu_to_le32(val), + }; + + skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg)); + return mt7601u_mcu_msg_send(dev, skb, CMD_CALIBRATION_OP, true); +} + +int mt7601u_write_reg_pairs(struct mt7601u_dev *dev, u32 base, + const struct mt76_reg_pair *data, int n) +{ + const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8; + struct sk_buff *skb; + int cnt, i, ret; + + if (!n) + return 0; + + cnt = min(max_vals_per_cmd, n); + + skb = alloc_skb(cnt * 8 + MT_DMA_HDR_LEN + 4, GFP_KERNEL); + if (!skb) + return -ENOMEM; + skb_reserve(skb, MT_DMA_HDR_LEN); + + for (i = 0; i < cnt; i++) { + skb_put_le32(skb, base + data[i].reg); + skb_put_le32(skb, data[i].value); + } + + ret = mt7601u_mcu_msg_send(dev, skb, CMD_RANDOM_WRITE, cnt == n); + if (ret) + return ret; + + return mt7601u_write_reg_pairs(dev, base, data + cnt, n - cnt); +} + +int mt7601u_burst_write_regs(struct mt7601u_dev *dev, u32 offset, + const u32 *data, int n) +{ + const int max_regs_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1; + struct sk_buff *skb; + int cnt, i, ret; + + if (!n) + return 0; + + cnt = min(max_regs_per_cmd, n); + + skb = alloc_skb(cnt * 4 + MT_DMA_HDR_LEN + 4, GFP_KERNEL); + if (!skb) + return -ENOMEM; + skb_reserve(skb, MT_DMA_HDR_LEN); + + skb_put_le32(skb, MT_MCU_MEMMAP_WLAN + offset); + for (i = 0; i < cnt; i++) + skb_put_le32(skb, data[i]); + + ret = mt7601u_mcu_msg_send(dev, skb, CMD_BURST_WRITE, cnt == n); + if (ret) + return ret; + + return mt7601u_burst_write_regs(dev, offset + cnt * 4, + data + cnt, n - cnt); +} + +struct mt76_fw_header { + __le32 ilm_len; + __le32 dlm_len; + __le16 build_ver; + __le16 fw_ver; + u8 pad[4]; + char build_time[16]; +}; + +struct mt76_fw { + struct mt76_fw_header hdr; + u8 ivb[MT_MCU_IVB_SIZE]; + u8 ilm[]; +}; + +static int __mt7601u_dma_fw(struct mt7601u_dev *dev, + const struct mt7601u_dma_buf *dma_buf, + const void *data, u32 len, u32 dst_addr) +{ + DECLARE_COMPLETION_ONSTACK(cmpl); + struct mt7601u_dma_buf buf = *dma_buf; /* we need to fake length */ + __le32 reg; + u32 val; + int ret; + + reg = cpu_to_le32(MT76_SET(MT_TXD_INFO_TYPE, DMA_PACKET) | + MT76_SET(MT_TXD_INFO_D_PORT, CPU_TX_PORT) | + MT76_SET(MT_TXD_INFO_LEN, len)); + memcpy(buf.buf, ®, sizeof(reg)); + memcpy(buf.buf + sizeof(reg), data, len); + memset(buf.buf + sizeof(reg) + len, 0, 8); + + ret = mt7601u_vendor_single_wr(dev, MT_VEND_WRITE_FCE, + MT_FCE_DMA_ADDR, dst_addr); + if (ret) + return ret; + len = roundup(len, 4); + ret = mt7601u_vendor_single_wr(dev, MT_VEND_WRITE_FCE, + MT_FCE_DMA_LEN, len << 16); + if (ret) + return ret; + + buf.len = MT_DMA_HDR_LEN + len + 4; + ret = mt7601u_usb_submit_buf(dev, USB_DIR_OUT, MT_EP_OUT_INBAND_CMD, + &buf, GFP_KERNEL, + mt7601u_complete_urb, &cmpl); + if (ret) + return ret; + + if (!wait_for_completion_timeout(&cmpl, msecs_to_jiffies(1000))) { + dev_err(dev->dev, "Error: firmware upload timed out\n"); + usb_kill_urb(buf.urb); + return -ETIMEDOUT; + } + if (mt7601u_urb_has_error(buf.urb)) { + dev_err(dev->dev, "Error: firmware upload urb failed:%d\n", + buf.urb->status); + return buf.urb->status; + } + + val = mt7601u_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX); + val++; + mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX, val); + + return 0; +} + +static int +mt7601u_dma_fw(struct mt7601u_dev *dev, struct mt7601u_dma_buf *dma_buf, + const void *data, int len, u32 dst_addr) +{ + int n, ret; + + if (len == 0) + return 0; + + n = min(MCU_FW_URB_MAX_PAYLOAD, len); + ret = __mt7601u_dma_fw(dev, dma_buf, data, n, dst_addr); + if (ret) + return ret; + + if (!mt76_poll_msec(dev, MT_MCU_COM_REG1, BIT(31), BIT(31), 500)) + return -ETIMEDOUT; + + return mt7601u_dma_fw(dev, dma_buf, data + n, len - n, dst_addr + n); +} + +static int +mt7601u_upload_firmware(struct mt7601u_dev *dev, const struct mt76_fw *fw) +{ + struct mt7601u_dma_buf dma_buf; + void *ivb; + u32 ilm_len, dlm_len; + int i, ret; + + ivb = kmemdup(fw->ivb, sizeof(fw->ivb), GFP_KERNEL); + if (!ivb || mt7601u_usb_alloc_buf(dev, MCU_FW_URB_SIZE, &dma_buf)) { + ret = -ENOMEM; + goto error; + } + + ilm_len = le32_to_cpu(fw->hdr.ilm_len) - sizeof(fw->ivb); + dev_dbg(dev->dev, "loading FW - ILM %u + IVB %zu\n", + ilm_len, sizeof(fw->ivb)); + ret = mt7601u_dma_fw(dev, &dma_buf, fw->ilm, ilm_len, sizeof(fw->ivb)); + if (ret) + goto error; + + dlm_len = le32_to_cpu(fw->hdr.dlm_len); + dev_dbg(dev->dev, "loading FW - DLM %u\n", dlm_len); + ret = mt7601u_dma_fw(dev, &dma_buf, fw->ilm + ilm_len, + dlm_len, MT_MCU_DLM_OFFSET); + if (ret) + goto error; + + ret = mt7601u_vendor_request(dev, MT_VEND_DEV_MODE, USB_DIR_OUT, + 0x12, 0, ivb, sizeof(fw->ivb)); + if (ret < 0) + goto error; + ret = 0; + + for (i = 100; i && !firmware_running(dev); i--) + msleep(10); + if (!i) { + ret = -ETIMEDOUT; + goto error; + } + + dev_dbg(dev->dev, "Firmware running!\n"); +error: + kfree(ivb); + mt7601u_usb_free_buf(dev, &dma_buf); + + return ret; +} + +static int mt7601u_load_firmware(struct mt7601u_dev *dev) +{ + const struct firmware *fw; + const struct mt76_fw_header *hdr; + int len, ret; + u32 val; + + mt7601u_wr(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN)); + + if (firmware_running(dev)) + return 0; + + ret = request_firmware(&fw, MT7601U_FIRMWARE, dev->dev); + if (ret) + return ret; + + if (!fw || !fw->data || fw->size < sizeof(*hdr)) + goto err_inv_fw; + + hdr = (const struct mt76_fw_header *) fw->data; + + if (le32_to_cpu(hdr->ilm_len) <= MT_MCU_IVB_SIZE) + goto err_inv_fw; + + len = sizeof(*hdr); + len += le32_to_cpu(hdr->ilm_len); + len += le32_to_cpu(hdr->dlm_len); + + if (fw->size != len) + goto err_inv_fw; + + val = le16_to_cpu(hdr->fw_ver); + dev_info(dev->dev, + "Firmware Version: %d.%d.%02d Build: %x Build time: %.16s\n", + (val >> 12) & 0xf, (val >> 8) & 0xf, val & 0xf, + le16_to_cpu(hdr->build_ver), hdr->build_time); + + len = le32_to_cpu(hdr->ilm_len); + + mt7601u_wr(dev, 0x94c, 0); + mt7601u_wr(dev, MT_FCE_PSE_CTRL, 0); + + mt7601u_vendor_reset(dev); + msleep(5); + + mt7601u_wr(dev, 0xa44, 0); + mt7601u_wr(dev, 0x230, 0x84210); + mt7601u_wr(dev, 0x400, 0x80c00); + mt7601u_wr(dev, 0x800, 1); + + mt7601u_rmw(dev, MT_PBF_CFG, 0, (MT_PBF_CFG_TX0Q_EN | + MT_PBF_CFG_TX1Q_EN | + MT_PBF_CFG_TX2Q_EN | + MT_PBF_CFG_TX3Q_EN)); + + mt7601u_wr(dev, MT_FCE_PSE_CTRL, 1); + + mt7601u_wr(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN)); + val = mt76_set(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_CLR); + val &= ~MT_USB_DMA_CFG_TX_CLR; + mt7601u_wr(dev, MT_USB_DMA_CFG, val); + + /* FCE tx_fs_base_ptr */ + mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_BASE_PTR, 0x400230); + /* FCE tx_fs_max_cnt */ + mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_MAX_COUNT, 1); + /* FCE pdma enable */ + mt7601u_wr(dev, MT_FCE_PDMA_GLOBAL_CONF, 0x44); + /* FCE skip_fs_en */ + mt7601u_wr(dev, MT_FCE_SKIP_FS, 3); + + ret = mt7601u_upload_firmware(dev, (const struct mt76_fw *)fw->data); + + release_firmware(fw); + + return ret; + +err_inv_fw: + dev_err(dev->dev, "Invalid firmware image\n"); + release_firmware(fw); + return -ENOENT; +} + +int mt7601u_mcu_init(struct mt7601u_dev *dev) +{ + int ret; + + mutex_init(&dev->mcu.mutex); + + ret = mt7601u_load_firmware(dev); + if (ret) + return ret; + + set_bit(MT7601U_STATE_MCU_RUNNING, &dev->state); + + return 0; +} + +int mt7601u_mcu_cmd_init(struct mt7601u_dev *dev) +{ + int ret; + + ret = mt7601u_mcu_function_select(dev, Q_SELECT, 1); + if (ret) + return ret; + + init_completion(&dev->mcu.resp_cmpl); + if (mt7601u_usb_alloc_buf(dev, MCU_RESP_URB_SIZE, &dev->mcu.resp)) { + mt7601u_usb_free_buf(dev, &dev->mcu.resp); + return -ENOMEM; + } + + ret = mt7601u_usb_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP, + &dev->mcu.resp, GFP_KERNEL, + mt7601u_complete_urb, &dev->mcu.resp_cmpl); + if (ret) { + mt7601u_usb_free_buf(dev, &dev->mcu.resp); + return ret; + } + + return 0; +} + +void mt7601u_mcu_cmd_deinit(struct mt7601u_dev *dev) +{ + usb_kill_urb(dev->mcu.resp.urb); + mt7601u_usb_free_buf(dev, &dev->mcu.resp); +} diff --git a/drivers/net/wireless/mediatek/mt7601u/mcu.h b/drivers/net/wireless/mediatek/mt7601u/mcu.h new file mode 100644 index 0000000..4a66d10 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mcu.h @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_MCU_H +#define __MT7601U_MCU_H + +struct mt7601u_dev; + +/* Register definitions */ +#define MT_MCU_RESET_CTL 0x070C +#define MT_MCU_INT_LEVEL 0x0718 +#define MT_MCU_COM_REG0 0x0730 +#define MT_MCU_COM_REG1 0x0734 +#define MT_MCU_COM_REG2 0x0738 +#define MT_MCU_COM_REG3 0x073C + +#define MT_MCU_IVB_SIZE 0x40 +#define MT_MCU_DLM_OFFSET 0x80000 + +#define MT_MCU_MEMMAP_WLAN 0x00410000 +#define MT_MCU_MEMMAP_BBP 0x40000000 +#define MT_MCU_MEMMAP_RF 0x80000000 + +#define INBAND_PACKET_MAX_LEN 192 + +enum mcu_cmd { + CMD_FUN_SET_OP = 1, + CMD_LOAD_CR = 2, + CMD_INIT_GAIN_OP = 3, + CMD_DYNC_VGA_OP = 6, + CMD_TDLS_CH_SW = 7, + CMD_BURST_WRITE = 8, + CMD_READ_MODIFY_WRITE = 9, + CMD_RANDOM_READ = 10, + CMD_BURST_READ = 11, + CMD_RANDOM_WRITE = 12, + CMD_LED_MODE_OP = 16, + CMD_POWER_SAVING_OP = 20, + CMD_WOW_CONFIG = 21, + CMD_WOW_QUERY = 22, + CMD_WOW_FEATURE = 24, + CMD_CARRIER_DETECT_OP = 28, + CMD_RADOR_DETECT_OP = 29, + CMD_SWITCH_CHANNEL_OP = 30, + CMD_CALIBRATION_OP = 31, + CMD_BEACON_OP = 32, + CMD_ANTENNA_OP = 33, +}; + +enum mcu_function { + Q_SELECT = 1, + ATOMIC_TSSI_SETTING = 5, +}; + +enum mcu_power_mode { + RADIO_OFF = 0x30, + RADIO_ON = 0x31, + RADIO_OFF_AUTO_WAKEUP = 0x32, + RADIO_OFF_ADVANCE = 0x33, + RADIO_ON_ADVANCE = 0x34, +}; + +enum mcu_calibrate { + MCU_CAL_R = 1, + MCU_CAL_DCOC, + MCU_CAL_LC, + MCU_CAL_LOFT, + MCU_CAL_TXIQ, + MCU_CAL_BW, + MCU_CAL_DPD, + MCU_CAL_RXIQ, + MCU_CAL_TXDCOC, +}; + +int mt7601u_mcu_init(struct mt7601u_dev *dev); +int mt7601u_mcu_cmd_init(struct mt7601u_dev *dev); +void mt7601u_mcu_cmd_deinit(struct mt7601u_dev *dev); + +int +mt7601u_mcu_calibrate(struct mt7601u_dev *dev, enum mcu_calibrate cal, u32 val); +int mt7601u_mcu_tssi_read_kick(struct mt7601u_dev *dev, int use_hvga); + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/mt7601u.h b/drivers/net/wireless/mediatek/mt7601u/mt7601u.h new file mode 100644 index 0000000..9102be6b --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mt7601u.h @@ -0,0 +1,390 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MT7601U_H +#define MT7601U_H + +#include +#include +#include +#include +#include +#include +#include + +#include "regs.h" +#include "util.h" + +#define MT_CALIBRATE_INTERVAL (4 * HZ) + +#define MT_FREQ_CAL_INIT_DELAY (30 * HZ) +#define MT_FREQ_CAL_CHECK_INTERVAL (10 * HZ) +#define MT_FREQ_CAL_ADJ_INTERVAL (HZ / 2) + +#define MT_BBP_REG_VERSION 0x00 + +#define MT_USB_AGGR_SIZE_LIMIT 28 /* * 1024B */ +#define MT_USB_AGGR_TIMEOUT 0x80 /* * 33ns */ +#define MT_RX_ORDER 3 +#define MT_RX_URB_SIZE (PAGE_SIZE << MT_RX_ORDER) + +struct mt7601u_dma_buf { + struct urb *urb; + void *buf; + dma_addr_t dma; + size_t len; +}; + +struct mt7601u_mcu { + struct mutex mutex; + + u8 msg_seq; + + struct mt7601u_dma_buf resp; + struct completion resp_cmpl; +}; + +struct mt7601u_freq_cal { + struct delayed_work work; + u8 freq; + bool enabled; + bool adjusting; +}; + +struct mac_stats { + u64 rx_stat[6]; + u64 tx_stat[6]; + u64 aggr_stat[2]; + u64 aggr_n[32]; + u64 zero_len_del[2]; +}; + +#define N_RX_ENTRIES 16 +struct mt7601u_rx_queue { + struct mt7601u_dev *dev; + + struct mt7601u_dma_buf_rx { + struct urb *urb; + struct page *p; + } e[N_RX_ENTRIES]; + + unsigned int start; + unsigned int end; + unsigned int entries; + unsigned int pending; +}; + +#define N_TX_ENTRIES 64 + +struct mt7601u_tx_queue { + struct mt7601u_dev *dev; + + struct mt7601u_dma_buf_tx { + struct urb *urb; + struct sk_buff *skb; + } e[N_TX_ENTRIES]; + + unsigned int start; + unsigned int end; + unsigned int entries; + unsigned int used; + unsigned int fifo_seq; +}; + +/* WCID allocation: + * 0: mcast wcid + * 1: bssid wcid + * 1...: STAs + * ...7e: group wcids + * 7f: reserved + */ +#define N_WCIDS 128 +#define GROUP_WCID(idx) (N_WCIDS - 2 - idx) + +struct mt7601u_eeprom_params; + +#define MT_EE_TEMPERATURE_SLOPE 39 +#define MT_FREQ_OFFSET_INVALID -128 + +enum mt_temp_mode { + MT_TEMP_MODE_NORMAL, + MT_TEMP_MODE_HIGH, + MT_TEMP_MODE_LOW, +}; + +enum mt_bw { + MT_BW_20, + MT_BW_40, +}; + +enum { + MT7601U_STATE_INITIALIZED, + MT7601U_STATE_REMOVED, + MT7601U_STATE_WLAN_RUNNING, + MT7601U_STATE_MCU_RUNNING, + MT7601U_STATE_SCANNING, + MT7601U_STATE_READING_STATS, + MT7601U_STATE_MORE_STATS, +}; + +/** + * struct mt7601u_dev - adapter structure + * @lock: protects @wcid->tx_rate. + * @tx_lock: protects @tx_q and changes of MT7601U_STATE_*_STATS + flags in @state. + * @rx_lock: protects @rx_q. + * @con_mon_lock: protects @ap_bssid, @bcn_*, @avg_rssi. + * @mutex: ensures exclusive access from mac80211 callbacks. + * @vendor_req_mutex: ensures atomicity of vendor requests. + * @reg_atomic_mutex: ensures atomicity of indirect register accesses + * (accesses to RF and BBP). + * @hw_atomic_mutex: ensures exclusive access to HW during critical + * operations (power management, channel switch). + */ +struct mt7601u_dev { + struct ieee80211_hw *hw; + struct device *dev; + + unsigned long state; + + struct mutex mutex; + + unsigned long wcid_mask[N_WCIDS / BITS_PER_LONG]; + + struct cfg80211_chan_def chandef; + struct ieee80211_supported_band *sband_2g; + + struct mt7601u_mcu mcu; + + struct delayed_work cal_work; + struct delayed_work mac_work; + + struct workqueue_struct *stat_wq; + struct delayed_work stat_work; + + struct mt76_wcid *mon_wcid; + struct mt76_wcid __rcu *wcid[N_WCIDS]; + + spinlock_t lock; + + const u16 *beacon_offsets; + + u8 macaddr[ETH_ALEN]; + struct mt7601u_eeprom_params *ee; + + struct mutex vendor_req_mutex; + struct mutex reg_atomic_mutex; + struct mutex hw_atomic_mutex; + + u32 rxfilter; + u32 debugfs_reg; + + u8 out_eps[8]; + u8 in_eps[8]; + u16 out_max_packet; + u16 in_max_packet; + + /* TX */ + spinlock_t tx_lock; + struct mt7601u_tx_queue *tx_q; + + atomic_t avg_ampdu_len; + + /* RX */ + spinlock_t rx_lock; + struct tasklet_struct rx_tasklet; + struct mt7601u_rx_queue rx_q; + + /* Connection monitoring things */ + spinlock_t con_mon_lock; + u8 ap_bssid[ETH_ALEN]; + + s8 bcn_freq_off; + u8 bcn_phy_mode; + + int avg_rssi; /* starts at 0 and converges */ + + u8 agc_save; + + struct mt7601u_freq_cal freq_cal; + + bool tssi_read_trig; + + s8 tssi_init; + s8 tssi_init_hvga; + s16 tssi_init_hvga_offset_db; + + int prev_pwr_diff; + + enum mt_temp_mode temp_mode; + int curr_temp; + int dpd_temp; + s8 raw_temp; + bool pll_lock_protect; + + u8 bw; + bool chan_ext_below; + + /* PA mode */ + u32 rf_pa_mode[2]; + + struct mac_stats stats; +}; + +struct mt7601u_tssi_params { + char tssi0; + int trgt_power; +}; + +struct mt76_wcid { + u8 idx; + u8 hw_key_idx; + + u16 tx_rate; + bool tx_rate_set; + u8 tx_rate_nss; +}; + +struct mt76_vif { + u8 idx; + + struct mt76_wcid group_wcid; +}; + +struct mt76_sta { + struct mt76_wcid wcid; + u16 agg_ssn[IEEE80211_NUM_TIDS]; +}; + +struct mt76_reg_pair { + u32 reg; + u32 value; +}; + +struct mt7601u_rxwi; + +extern const struct ieee80211_ops mt7601u_ops; + +void mt7601u_init_debugfs(struct mt7601u_dev *dev); + +u32 mt7601u_rr(struct mt7601u_dev *dev, u32 offset); +void mt7601u_wr(struct mt7601u_dev *dev, u32 offset, u32 val); +u32 mt7601u_rmw(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val); +u32 mt7601u_rmc(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val); +void mt7601u_wr_copy(struct mt7601u_dev *dev, u32 offset, + const void *data, int len); + +int mt7601u_wait_asic_ready(struct mt7601u_dev *dev); +bool mt76_poll(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val, + int timeout); +bool mt76_poll_msec(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val, + int timeout); + +/* Compatibility with mt76 */ +#define mt76_rmw_field(_dev, _reg, _field, _val) \ + mt76_rmw(_dev, _reg, _field, MT76_SET(_field, _val)) + +static inline u32 mt76_rr(struct mt7601u_dev *dev, u32 offset) +{ + return mt7601u_rr(dev, offset); +} + +static inline void mt76_wr(struct mt7601u_dev *dev, u32 offset, u32 val) +{ + return mt7601u_wr(dev, offset, val); +} + +static inline u32 +mt76_rmw(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val) +{ + return mt7601u_rmw(dev, offset, mask, val); +} + +static inline u32 mt76_set(struct mt7601u_dev *dev, u32 offset, u32 val) +{ + return mt76_rmw(dev, offset, 0, val); +} + +static inline u32 mt76_clear(struct mt7601u_dev *dev, u32 offset, u32 val) +{ + return mt76_rmw(dev, offset, val, 0); +} + +int mt7601u_write_reg_pairs(struct mt7601u_dev *dev, u32 base, + const struct mt76_reg_pair *data, int len); +int mt7601u_burst_write_regs(struct mt7601u_dev *dev, u32 offset, + const u32 *data, int n); +void mt7601u_addr_wr(struct mt7601u_dev *dev, const u32 offset, const u8 *addr); + +/* Init */ +struct mt7601u_dev *mt7601u_alloc_device(struct device *dev); +int mt7601u_init_hardware(struct mt7601u_dev *dev); +int mt7601u_register_device(struct mt7601u_dev *dev); +void mt7601u_cleanup(struct mt7601u_dev *dev); + +int mt7601u_mac_start(struct mt7601u_dev *dev); +void mt7601u_mac_stop(struct mt7601u_dev *dev); + +/* PHY */ +int mt7601u_phy_init(struct mt7601u_dev *dev); +int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev); +void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path); +void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 path); +int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw); +void mt7601u_agc_save(struct mt7601u_dev *dev); +void mt7601u_agc_restore(struct mt7601u_dev *dev); +int mt7601u_phy_set_channel(struct mt7601u_dev *dev, + struct cfg80211_chan_def *chandef); +void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev); +int mt7601u_phy_get_rssi(struct mt7601u_dev *dev, + struct mt7601u_rxwi *rxwi, u16 rate); +void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev, + struct ieee80211_bss_conf *info); + +/* MAC */ +void mt7601u_mac_work(struct work_struct *work); +void mt7601u_mac_set_protection(struct mt7601u_dev *dev, bool legacy_prot, + int ht_mode); +void mt7601u_mac_set_short_preamble(struct mt7601u_dev *dev, bool short_preamb); +void mt7601u_mac_config_tsf(struct mt7601u_dev *dev, bool enable, int interval); +void +mt7601u_mac_wcid_setup(struct mt7601u_dev *dev, u8 idx, u8 vif_idx, u8 *mac); +void mt7601u_mac_set_ampdu_factor(struct mt7601u_dev *dev); + +/* TX */ +void mt7601u_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb); +int mt7601u_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + u16 queue, const struct ieee80211_tx_queue_params *params); +void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb); +void mt7601u_tx_stat(struct work_struct *work); + +/* util */ +void mt76_remove_hdr_pad(struct sk_buff *skb); +int mt76_insert_hdr_pad(struct sk_buff *skb); + +u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below); + +static inline u32 mt7601u_mac_set_ctrlch(struct mt7601u_dev *dev, bool below) +{ + return mt7601u_rmc(dev, MT_TX_BAND_CFG, 1, below); +} + +int mt7601u_dma_init(struct mt7601u_dev *dev); +void mt7601u_dma_cleanup(struct mt7601u_dev *dev); + +int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb, + struct mt76_wcid *wcid, int hw_q); + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c new file mode 100644 index 0000000..1908af6 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/phy.c @@ -0,0 +1,1251 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "mcu.h" +#include "eeprom.h" +#include "trace.h" +#include "initvals_phy.h" + +#include + +static void mt7601u_agc_reset(struct mt7601u_dev *dev); + +static int +mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value) +{ + int ret = 0; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + WARN_ON(offset > 63)) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) { + ret = -ETIMEDOUT; + goto out; + } + + mt7601u_wr(dev, MT_RF_CSR_CFG, MT76_SET(MT_RF_CSR_CFG_DATA, value) | + MT76_SET(MT_RF_CSR_CFG_REG_BANK, bank) | + MT76_SET(MT_RF_CSR_CFG_REG_ID, offset) | + MT_RF_CSR_CFG_WR | + MT_RF_CSR_CFG_KICK); + trace_rf_write(dev, bank, offset, value); +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n", + bank, offset, ret); + + return ret; +} + +static int +mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset) +{ + int ret = -ETIMEDOUT; + u32 val; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + WARN_ON(offset > 63)) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0xff; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) + goto out; + + mt7601u_wr(dev, MT_RF_CSR_CFG, MT76_SET(MT_RF_CSR_CFG_REG_BANK, bank) | + MT76_SET(MT_RF_CSR_CFG_REG_ID, offset) | + MT_RF_CSR_CFG_KICK); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) + goto out; + + val = mt7601u_rr(dev, MT_RF_CSR_CFG); + if (MT76_GET(MT_RF_CSR_CFG_REG_ID, val) == offset && + MT76_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) { + ret = MT76_GET(MT_RF_CSR_CFG_DATA, val); + trace_rf_read(dev, bank, offset, ret); + } +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n", + bank, offset, ret); + + return ret; +} + +static int +mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_rf_rr(dev, bank, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + ret = mt7601u_rf_wr(dev, bank, offset, val); + if (ret) + return ret; + + return val; +} + +static int +mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val) +{ + return mt7601u_rf_rmw(dev, bank, offset, 0, val); +} + +static int +mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask) +{ + return mt7601u_rf_rmw(dev, bank, offset, mask, 0); +} + +static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val) +{ + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) { + dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset); + goto out; + } + + mt7601u_wr(dev, MT_BBP_CSR_CFG, + MT76_SET(MT_BBP_CSR_CFG_VAL, val) | + MT76_SET(MT_BBP_CSR_CFG_REG_NUM, offset) | + MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY); + trace_bbp_write(dev, offset, val); +out: + mutex_unlock(&dev->reg_atomic_mutex); +} + +static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset) +{ + u32 val; + int ret = -ETIMEDOUT; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state))) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0xff; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) + goto out; + + mt7601u_wr(dev, MT_BBP_CSR_CFG, + MT76_SET(MT_BBP_CSR_CFG_REG_NUM, offset) | + MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY | + MT_BBP_CSR_CFG_READ); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) + goto out; + + val = mt7601u_rr(dev, MT_BBP_CSR_CFG); + if (MT76_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) { + ret = MT76_GET(MT_BBP_CSR_CFG_VAL, val); + trace_bbp_read(dev, offset, ret); + } +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n", + offset, ret); + + return ret; +} + +static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_bbp_rr(dev, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + mt7601u_bbp_wr(dev, offset, val); + + return val; +} + +static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_bbp_rr(dev, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + if (ret != val) + mt7601u_bbp_wr(dev, offset, val); + + return val; +} + +int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev) +{ + int i = 20; + u8 val; + + do { + val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION); + if (val && ~val) + break; + } while (--i); + + if (!i) { + dev_err(dev->dev, "Error: BBP is not ready\n"); + return -EIO; + } + + return 0; +} + +u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below) +{ + return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0); +} + +int mt7601u_phy_get_rssi(struct mt7601u_dev *dev, + struct mt7601u_rxwi *rxwi, u16 rate) +{ + static const s8 lna[2][2][3] = { + /* main LNA */ { + /* bw20 */ { -2, 15, 33 }, + /* bw40 */ { 0, 16, 34 } + }, + /* aux LNA */ { + /* bw20 */ { -2, 15, 33 }, + /* bw40 */ { -2, 16, 34 } + } + }; + int bw = MT76_GET(MT_RXWI_RATE_BW, rate); + int aux_lna = MT76_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant); + int lna_id = MT76_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain); + int val; + + if (lna_id) /* LNA id can be 0, 2, 3. */ + lna_id--; + + val = 8; + val -= lna[aux_lna][bw][lna_id]; + val -= MT76_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain); + val -= dev->ee->lna_gain; + val -= dev->ee->rssi_offset[0]; + + return val; +} + +static void mt7601u_vco_cal(struct mt7601u_dev *dev) +{ + mt7601u_rf_wr(dev, 0, 4, 0x0a); + mt7601u_rf_wr(dev, 0, 5, 0x20); + mt7601u_rf_set(dev, 0, 4, BIT(7)); + msleep(2); +} + +static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal) +{ + u32 filter = 0; + int ret; + + if (!cal) + filter |= 0x10000; + if (dev->bw != MT_BW_20) + filter |= 0x00100; + + /* TX */ + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1); + if (ret) + return ret; + /* RX */ + return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter); +} + +static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev) +{ + const struct reg_table *t; + + if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW)) + return -EINVAL; + + t = &bbp_mode_table[dev->temp_mode][dev->bw]; + + return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n); +} + +static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name) +{ + const struct reg_table *t; + int ret; + + if (dev->temp_mode == mode) + return 0; + + dev->temp_mode = mode; + trace_temp_mode(dev, mode); + + t = bbp_mode_table[dev->temp_mode]; + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + t[2].regs, t[2].n); + if (ret) + return ret; + + return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + t[dev->bw].regs, t[dev->bw].n); +} + +static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan) +{ + struct mt7601u_rate_power *t = &dev->ee->power_rate_table; + + if (hw_chan != 14 || dev->bw != MT_BW_20) { + mt7601u_bbp_rmw(dev, 4, 0x20, 0); + mt7601u_bbp_wr(dev, 178, 0xff); + + t->cck[0].bw20 = dev->ee->real_cck_bw20[0]; + t->cck[1].bw20 = dev->ee->real_cck_bw20[1]; + } else { /* Apply CH14 OBW fixup */ + mt7601u_bbp_wr(dev, 4, 0x60); + mt7601u_bbp_wr(dev, 178, 0); + + /* Note: vendor code is buggy here for negative values */ + t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2; + t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2; + } +} + +static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev, + struct cfg80211_chan_def *chandef) +{ +#define FREQ_PLAN_REGS 4 + static const u8 freq_plan[14][FREQ_PLAN_REGS] = { + { 0x99, 0x99, 0x09, 0x50 }, + { 0x46, 0x44, 0x0a, 0x50 }, + { 0xec, 0xee, 0x0a, 0x50 }, + { 0x99, 0x99, 0x0b, 0x50 }, + { 0x46, 0x44, 0x08, 0x51 }, + { 0xec, 0xee, 0x08, 0x51 }, + { 0x99, 0x99, 0x09, 0x51 }, + { 0x46, 0x44, 0x0a, 0x51 }, + { 0xec, 0xee, 0x0a, 0x51 }, + { 0x99, 0x99, 0x0b, 0x51 }, + { 0x46, 0x44, 0x08, 0x52 }, + { 0xec, 0xee, 0x08, 0x52 }, + { 0x99, 0x99, 0x09, 0x52 }, + { 0x33, 0x33, 0x0b, 0x52 }, + }; + struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = { + { 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 }, + }; + struct mt76_reg_pair bbp_settings[3] = { + { 62, 0x37 - dev->ee->lna_gain }, + { 63, 0x37 - dev->ee->lna_gain }, + { 64, 0x37 - dev->ee->lna_gain }, + }; + + struct ieee80211_channel *chan = chandef->chan; + enum nl80211_channel_type chan_type = + cfg80211_get_chandef_type(chandef); + struct mt7601u_rate_power *t = &dev->ee->power_rate_table; + int chan_idx; + bool chan_ext_below; + u8 bw; + int i, ret; + + bw = MT_BW_20; + chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS); + chan_idx = chan->hw_value - 1; + + if (chandef->width == NL80211_CHAN_WIDTH_40) { + bw = MT_BW_40; + + if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS) + chan_idx -= 2; + else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS) + chan_idx += 2; + else + dev_err(dev->dev, "Error: invalid 40MHz channel!!\n"); + } + + if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) { + dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n", + bw, chan_ext_below); + + mt7601u_bbp_set_bw(dev, bw); + + mt7601u_bbp_set_ctrlch(dev, chan_ext_below); + mt7601u_mac_set_ctrlch(dev, chan_ext_below); + dev->chan_ext_below = chan_ext_below; + } + + for (i = 0; i < FREQ_PLAN_REGS; i++) + channel_freq_plan[i].value = freq_plan[chan_idx][i]; + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF, + channel_freq_plan, FREQ_PLAN_REGS); + if (ret) + return ret; + + mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f, + dev->ee->chan_pwr[chan_idx] & 0x3f); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + bbp_settings, ARRAY_SIZE(bbp_settings)); + if (ret) + return ret; + + mt7601u_vco_cal(dev); + mt7601u_bbp_set_bw(dev, bw); + ret = mt7601u_set_bw_filter(dev, false); + if (ret) + return ret; + + mt7601u_apply_ch14_fixup(dev, chan->hw_value); + mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 | + int_to_s6(t->ofdm[0].bw20) << 16 | + int_to_s6(t->cck[1].bw20) << 8 | + int_to_s6(t->cck[0].bw20)); + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + mt7601u_agc_reset(dev); + + dev->chandef = *chandef; + + return 0; +} + +int mt7601u_phy_set_channel(struct mt7601u_dev *dev, + struct cfg80211_chan_def *chandef) +{ + int ret; + + cancel_delayed_work_sync(&dev->cal_work); + cancel_delayed_work_sync(&dev->freq_cal.work); + + mutex_lock(&dev->hw_atomic_mutex); + ret = __mt7601u_phy_set_channel(dev, chandef); + mutex_unlock(&dev->hw_atomic_mutex); + if (ret) + return ret; + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + return 0; + + ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, + MT_CALIBRATE_INTERVAL); + if (dev->freq_cal.enabled) + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, + MT_FREQ_CAL_INIT_DELAY); + return 0; +} + +#define BBP_R47_FLAG GENMASK(2, 0) +#define BBP_R47_F_TSSI 0 +#define BBP_R47_F_PKT_T 1 +#define BBP_R47_F_TX_RATE 2 +#define BBP_R47_F_TEMP 4 +/** + * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair + * @dev: pointer to adapter structure + * @reg: value of BBP R47 before the operation + * @flag: one of the BBP_R47_F_* flags + * + * Convenience helper for reading values through BBP R47/R49 pair. + * Takes old value of BBP R47 as @reg, because callers usually have it + * cached already. + * + * Return: value of BBP R49. + */ +static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag) +{ + flag |= reg & ~BBP_R47_FLAG; + mt7601u_bbp_wr(dev, 47, flag); + usleep_range(500, 700); + return mt7601u_bbp_rr(dev, 49); +} + +static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev) +{ + u8 bbp_val, temp; + u32 rf_bp, rf_set; + int i; + + rf_set = mt7601u_rr(dev, MT_RF_SETTING_0); + rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010); + mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010); + + bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10); + + mt7601u_bbp_wr(dev, 22, 0x40); + + for (i = 100; i && (bbp_val & 0x10); i--) + bbp_val = mt7601u_bbp_rr(dev, 47); + + temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP); + + mt7601u_bbp_wr(dev, 22, 0); + + bbp_val = mt7601u_bbp_rr(dev, 21); + bbp_val |= 0x02; + mt7601u_bbp_wr(dev, 21, bbp_val); + bbp_val &= ~0x02; + mt7601u_bbp_wr(dev, 21, bbp_val); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, rf_set); + mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp); + + trace_read_temp(dev, temp); + return temp; +} + +static s8 mt7601u_read_temp(struct mt7601u_dev *dev) +{ + int i; + u8 val; + s8 temp; + + val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10); + + /* Note: this rarely succeeds, temp can change even if it fails. */ + for (i = 100; i && (val & 0x10); i--) + val = mt7601u_bbp_rr(dev, 47); + + temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP); + + trace_read_temp(dev, temp); + return temp; +} + +static void mt7601u_rxdc_cal(struct mt7601u_dev *dev) +{ + static const struct mt76_reg_pair intro[] = { + { 158, 0x8d }, { 159, 0xfc }, + { 158, 0x8c }, { 159, 0x4c }, + }, outro[] = { + { 158, 0x8d }, { 159, 0xe0 }, + }; + u32 mac_ctrl; + int i, ret; + + mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + intro, ARRAY_SIZE(intro)); + if (ret) + dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret); + + for (i = 20; i; i--) { + usleep_range(300, 500); + + mt7601u_bbp_wr(dev, 158, 0x8c); + if (mt7601u_bbp_rr(dev, 159) == 0x0c) + break; + } + if (!i) + dev_err(dev->dev, "%s timed out\n", __func__); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + outro, ARRAY_SIZE(outro)); + if (ret) + dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); +} + +void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev) +{ + mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp); + + mt7601u_rxdc_cal(dev); +} + +/* Note: function copied from vendor driver */ +static s16 lin2dBd(u16 linear) +{ + short exp = 0; + unsigned int mantisa; + int app, dBd; + + if (WARN_ON(!linear)) + return -10000; + + mantisa = linear; + + exp = fls(mantisa) - 16; + if (exp > 0) + mantisa >>= exp; + else + mantisa <<= abs(exp); + + if (mantisa <= 0xb800) + app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600); + else + app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00); + if (app < 0) + app = 0; + + dBd = ((15 + exp) << 15) + app; + dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7); + dBd = (dBd >> 10); + + return dBd; +} + +static void +mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db) +{ + struct tssi_data *d = &dev->ee->tssi_data; + int init_offset; + + init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10; + + mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, + int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP); +} + +static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev) +{ + u8 rf_vga, rf_mixer, bbp_r47; + int i, j; + s8 res[4]; + s16 tssi_init_db, tssi_init_hvga_db; + + mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030); + mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); + + mt7601u_bbp_wr(dev, 58, 0); + mt7601u_bbp_wr(dev, 241, 0x2); + mt7601u_bbp_wr(dev, 23, 0x8); + bbp_r47 = mt7601u_bbp_rr(dev, 47); + + /* Set VGA gain */ + rf_vga = mt7601u_rf_rr(dev, 5, 3); + mt7601u_rf_wr(dev, 5, 3, 8); + + /* Mixer disable */ + rf_mixer = mt7601u_rf_rr(dev, 4, 39); + mt7601u_rf_wr(dev, 4, 39, 0); + + for (i = 0; i < 4; i++) { + mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0); + + mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02); + mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11); + + /* BBP TSSI initial and soft reset */ + mt7601u_bbp_wr(dev, 22, 0); + mt7601u_bbp_wr(dev, 244, 0); + + mt7601u_bbp_wr(dev, 21, 1); + udelay(1); + mt7601u_bbp_wr(dev, 21, 0); + + /* TSSI measurement */ + mt7601u_bbp_wr(dev, 47, 0x50); + mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40); + + for (j = 20; j; j--) + if (!(mt7601u_bbp_rr(dev, 47) & 0x10)) + break; + if (!j) + dev_err(dev->dev, "%s timed out\n", __func__); + + /* TSSI read */ + mt7601u_bbp_wr(dev, 47, 0x40); + res[i] = mt7601u_bbp_rr(dev, 49); + } + + tssi_init_db = lin2dBd((short)res[1] - res[0]); + tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4); + dev->tssi_init = res[0]; + dev->tssi_init_hvga = res[2]; + dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db; + + dev_dbg(dev->dev, + "TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n", + dev->tssi_init, tssi_init_db, dev->tssi_init_hvga, + tssi_init_hvga_db, dev->tssi_init_hvga_offset_db); + + mt7601u_bbp_wr(dev, 22, 0); + mt7601u_bbp_wr(dev, 244, 0); + + mt7601u_bbp_wr(dev, 21, 1); + udelay(1); + mt7601u_bbp_wr(dev, 21, 0); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, 0); + + mt7601u_rf_wr(dev, 5, 3, rf_vga); + mt7601u_rf_wr(dev, 4, 39, rf_mixer); + mt7601u_bbp_wr(dev, 47, bbp_r47); + + mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db); +} + +static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on) +{ + int ret, temp, hi_temp = 400, lo_temp = -200; + + temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE; + dev->curr_temp = temp; + + /* DPD Calibration */ + if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) { + dev->dpd_temp = temp; + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); + if (ret) + return ret; + + mt7601u_vco_cal(dev); + + dev_dbg(dev->dev, "Recalibrate DPD\n"); + } + + /* PLL Lock Protect */ + if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */ + dev->pll_lock_protect = true; + + mt7601u_rf_wr(dev, 4, 4, 6); + mt7601u_rf_clear(dev, 4, 10, 0x30); + + dev_dbg(dev->dev, "PLL lock protect on - too cold\n"); + } else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */ + dev->pll_lock_protect = false; + + mt7601u_rf_wr(dev, 4, 4, 0); + mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10); + + dev_dbg(dev->dev, "PLL lock protect off\n"); + } + + if (on) { + hi_temp -= 50; + lo_temp -= 50; + } + + /* BBP CR for H, L, N temperature */ + if (temp > hi_temp) + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high"); + else if (temp > lo_temp) + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal"); + else + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low"); +} + +/* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */ +static int mt7601u_current_tx_power(struct mt7601u_dev *dev) +{ + return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1]; +} + +static bool mt7601u_use_hvga(struct mt7601u_dev *dev) +{ + return !(mt7601u_current_tx_power(dev) > 20); +} + +static s16 +mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate) +{ + static const s16 decode_tb[] = { 0, 8847, -5734, -5734 }; + u32 reg; + + switch (phy_mode) { + case MT_PHY_TYPE_OFDM: + tx_rate += 4; + case MT_PHY_TYPE_CCK: + reg = dev->rf_pa_mode[0]; + break; + default: + reg = dev->rf_pa_mode[1]; + break; + } + + return decode_tb[(reg >> (tx_rate * 2)) & 0x3]; +} + +static struct mt7601u_tssi_params +mt7601u_tssi_params_get(struct mt7601u_dev *dev) +{ + static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 }; + static const int static_power[4] = { 0, -49152, -98304, 49152 }; + struct mt7601u_tssi_params p; + u8 bbp_r47, pkt_type, tx_rate; + struct power_per_rate *rate_table; + + bbp_r47 = mt7601u_bbp_rr(dev, 47); + + p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI); + dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP); + pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T); + + p.trgt_power = mt7601u_current_tx_power(dev); + + switch (pkt_type & 0x03) { + case MT_PHY_TYPE_CCK: + tx_rate = (pkt_type >> 4) & 0x03; + rate_table = dev->ee->power_rate_table.cck; + break; + + case MT_PHY_TYPE_OFDM: + tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07]; + rate_table = dev->ee->power_rate_table.ofdm; + break; + + default: + tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE); + tx_rate &= 0x7f; + rate_table = dev->ee->power_rate_table.ht; + break; + } + + if (dev->bw == MT_BW_20) + p.trgt_power += rate_table[tx_rate / 2].bw20; + else + p.trgt_power += rate_table[tx_rate / 2].bw40; + + p.trgt_power <<= 12; + + dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power); + + p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03, + tx_rate); + + /* Channel 14, cck, bw20 */ + if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) { + if (mt7601u_bbp_rr(dev, 4) & 0x20) + p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830; + else + p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576; + } + + p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03]; + + p.trgt_power += dev->ee->tssi_data.tx0_delta_offset; + + dev_dbg(dev->dev, + "tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n", + p.tssi0, p.trgt_power, dev->raw_temp, pkt_type); + + return p; +} + +static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev) +{ + return !(mt7601u_bbp_rr(dev, 47) & 0x10); +} + +static int mt7601u_tssi_cal(struct mt7601u_dev *dev) +{ + struct mt7601u_tssi_params params; + int curr_pwr, diff_pwr; + char tssi_offset; + s8 tssi_init; + s16 tssi_m_dc, tssi_db; + bool hvga; + u32 val; + + if (!dev->ee->tssi_enabled) + return 0; + + hvga = mt7601u_use_hvga(dev); + if (!dev->tssi_read_trig) + return mt7601u_mcu_tssi_read_kick(dev, hvga); + + if (!mt7601u_tssi_read_ready(dev)) + return 0; + + params = mt7601u_tssi_params_get(dev); + + tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init); + tssi_m_dc = params.tssi0 - tssi_init; + tssi_db = lin2dBd(tssi_m_dc); + dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n", + tssi_m_dc, tssi_db, hvga); + + if (dev->chandef.chan->hw_value < 5) + tssi_offset = dev->ee->tssi_data.offset[0]; + else if (dev->chandef.chan->hw_value < 9) + tssi_offset = dev->ee->tssi_data.offset[1]; + else + tssi_offset = dev->ee->tssi_data.offset[2]; + + if (hvga) + tssi_db -= dev->tssi_init_hvga_offset_db; + + curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9); + diff_pwr = params.trgt_power - curr_pwr; + dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr); + + if (params.tssi0 > 126 && diff_pwr > 0) { + dev_err(dev->dev, "Error: TSSI upper saturation\n"); + diff_pwr = 0; + } + if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) { + dev_err(dev->dev, "Error: TSSI lower saturation\n"); + diff_pwr = 0; + } + + if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 && + (abs(diff_pwr) > abs(dev->prev_pwr_diff) || + (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff))) + diff_pwr = 0; + else + dev->prev_pwr_diff = diff_pwr; + + diff_pwr += (diff_pwr > 0) ? 2048 : -2048; + diff_pwr /= 4096; + + dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr); + + val = mt7601u_rr(dev, MT_TX_ALC_CFG_1); + curr_pwr = s6_to_int(MT76_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val)); + diff_pwr += curr_pwr; + val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr); + mt7601u_wr(dev, MT_TX_ALC_CFG_1, val); + + return mt7601u_mcu_tssi_read_kick(dev, hvga); +} + +static u8 mt7601u_agc_default(struct mt7601u_dev *dev) +{ + return (dev->ee->lna_gain - 8) * 2 + 0x34; +} + +static void mt7601u_agc_reset(struct mt7601u_dev *dev) +{ + u8 agc = mt7601u_agc_default(dev); + + mt7601u_bbp_wr(dev, 66, agc); +} + +void mt7601u_agc_save(struct mt7601u_dev *dev) +{ + dev->agc_save = mt7601u_bbp_rr(dev, 66); +} + +void mt7601u_agc_restore(struct mt7601u_dev *dev) +{ + mt7601u_bbp_wr(dev, 66, dev->agc_save); +} + +static void mt7601u_agc_tune(struct mt7601u_dev *dev) +{ + u8 val = mt7601u_agc_default(dev); + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + return; + + /* Note: only in STA mode and not dozing; perhaps do this only if + * there is enough rssi updates since last run? + * Rssi updates are only on beacons and U2M so should work... + */ + spin_lock_bh(&dev->con_mon_lock); + if (dev->avg_rssi <= -70) + val -= 0x20; + else if (dev->avg_rssi <= -60) + val -= 0x10; + spin_unlock_bh(&dev->con_mon_lock); + + if (val != mt7601u_bbp_rr(dev, 66)) + mt7601u_bbp_wr(dev, 66, val); + + /* TODO: also if lost a lot of beacons try resetting + * (see RTMPSetAGCInitValue() call in mlme.c). + */ +} + +static void mt7601u_phy_calibrate(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + cal_work.work); + + mt7601u_agc_tune(dev); + mt7601u_tssi_cal(dev); + /* If TSSI calibration was run it already updated temperature. */ + if (!dev->ee->tssi_enabled) + dev->raw_temp = mt7601u_read_temp(dev); + mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */ + + ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, + MT_CALIBRATE_INTERVAL); +} + +static unsigned long +__mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode) +{ + u8 activate_threshold, deactivate_threshold; + + trace_freq_cal_offset(dev, phy_mode, last_offset); + + /* No beacons received - reschedule soon */ + if (last_offset == MT_FREQ_OFFSET_INVALID) + return MT_FREQ_CAL_ADJ_INTERVAL; + + switch (phy_mode) { + case MT_PHY_TYPE_CCK: + activate_threshold = 19; + deactivate_threshold = 5; + break; + case MT_PHY_TYPE_OFDM: + activate_threshold = 102; + deactivate_threshold = 32; + break; + case MT_PHY_TYPE_HT: + case MT_PHY_TYPE_HT_GF: + activate_threshold = 82; + deactivate_threshold = 20; + break; + default: + WARN_ON(1); + return MT_FREQ_CAL_CHECK_INTERVAL; + } + + if (abs(last_offset) >= activate_threshold) + dev->freq_cal.adjusting = true; + else if (abs(last_offset) <= deactivate_threshold) + dev->freq_cal.adjusting = false; + + if (!dev->freq_cal.adjusting) + return MT_FREQ_CAL_CHECK_INTERVAL; + + if (last_offset > deactivate_threshold) { + if (dev->freq_cal.freq > 0) + dev->freq_cal.freq--; + else + dev->freq_cal.adjusting = false; + } else if (last_offset < -deactivate_threshold) { + if (dev->freq_cal.freq < 0xbf) + dev->freq_cal.freq++; + else + dev->freq_cal.adjusting = false; + } + + trace_freq_cal_adjust(dev, dev->freq_cal.freq); + mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq); + mt7601u_vco_cal(dev); + + return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL : + MT_FREQ_CAL_CHECK_INTERVAL; +} + +static void mt7601u_phy_freq_cal(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + freq_cal.work.work); + s8 last_offset; + u8 phy_mode; + unsigned long delay; + + spin_lock_bh(&dev->con_mon_lock); + last_offset = dev->bcn_freq_off; + phy_mode = dev->bcn_phy_mode; + spin_unlock_bh(&dev->con_mon_lock); + + delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode); + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay); + + spin_lock_bh(&dev->con_mon_lock); + dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; + spin_unlock_bh(&dev->con_mon_lock); +} + +void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev, + struct ieee80211_bss_conf *info) +{ + if (!info->assoc) + cancel_delayed_work_sync(&dev->freq_cal.work); + + /* Start/stop collecting beacon data */ + spin_lock_bh(&dev->con_mon_lock); + ether_addr_copy(dev->ap_bssid, info->bssid); + dev->avg_rssi = 0; + dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; + spin_unlock_bh(&dev->con_mon_lock); + + dev->freq_cal.freq = dev->ee->rf_freq_off; + dev->freq_cal.enabled = info->assoc; + dev->freq_cal.adjusting = false; + + if (info->assoc) + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, + MT_FREQ_CAL_INIT_DELAY); +} + +static int mt7601u_init_cal(struct mt7601u_dev *dev) +{ + u32 mac_ctrl; + int ret; + + dev->raw_temp = mt7601u_read_bootup_temp(dev); + dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) * + MT_EE_TEMPERATURE_SLOPE; + dev->dpd_temp = dev->curr_temp; + + mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0); + if (ret) + return ret; + + ret = mt7601u_rf_rr(dev, 0, 4); + if (ret < 0) + return ret; + ret |= 0x80; + ret = mt7601u_rf_wr(dev, 0, 4, ret); + if (ret) + return ret; + msleep(2); + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0); + if (ret) + return ret; + + mt7601u_rxdc_cal(dev); + + ret = mt7601u_set_bw_filter(dev, true); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); + if (ret) + return ret; + + mt7601u_rxdc_cal(dev); + + mt7601u_tssi_dc_gain_cal(dev); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); + + mt7601u_temp_comp(dev, true); + + return 0; +} + +int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw) +{ + u32 val, old; + + if (bw == dev->bw) { + /* Vendor driver does the rmc even when no change is needed. */ + mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); + + return 0; + } + dev->bw = bw; + + /* Stop MAC for the time of bw change */ + old = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, val); + mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, + 0, 500000); + + mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, old); + + return mt7601u_load_bbp_temp_table_bw(dev); +} + +/** + * mt7601u_set_rx_path - set rx path in BBP + * @dev: pointer to adapter structure + * @path: rx path to set values are 0-based + */ +void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path) +{ + mt7601u_bbp_rmw(dev, 3, 0x18, path << 3); +} + +/** + * mt7601u_set_tx_dac - set which tx DAC to use + * @dev: pointer to adapter structure + * @path: DAC index, values are 0-based + */ +void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac) +{ + mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3); +} + +int mt7601u_phy_init(struct mt7601u_dev *dev) +{ + int ret; + + dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0); + dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1); + + ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_central, + ARRAY_SIZE(rf_central)); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_channel, + ARRAY_SIZE(rf_channel)); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga)); + if (ret) + return ret; + + ret = mt7601u_init_cal(dev); + if (ret) + return ret; + + dev->prev_pwr_diff = 100; + + INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate); + INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal); + + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/regs.h b/drivers/net/wireless/mediatek/mt7601u/regs.h new file mode 100644 index 0000000..afd8978 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/regs.h @@ -0,0 +1,636 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT76_REGS_H +#define __MT76_REGS_H + +#include + +#ifndef GENMASK +#define GENMASK(h, l) (((U32_C(1) << ((h) - (l) + 1)) - 1) << (l)) +#endif + +#define MT_ASIC_VERSION 0x0000 + +#define MT76XX_REV_E3 0x22 +#define MT76XX_REV_E4 0x33 + +#define MT_CMB_CTRL 0x0020 +#define MT_CMB_CTRL_XTAL_RDY BIT(22) +#define MT_CMB_CTRL_PLL_LD BIT(23) + +#define MT_EFUSE_CTRL 0x0024 +#define MT_EFUSE_CTRL_AOUT GENMASK(5, 0) +#define MT_EFUSE_CTRL_MODE GENMASK(7, 6) +#define MT_EFUSE_CTRL_LDO_OFF_TIME GENMASK(13, 8) +#define MT_EFUSE_CTRL_LDO_ON_TIME GENMASK(15, 14) +#define MT_EFUSE_CTRL_AIN GENMASK(25, 16) +#define MT_EFUSE_CTRL_KICK BIT(30) +#define MT_EFUSE_CTRL_SEL BIT(31) + +#define MT_EFUSE_DATA_BASE 0x0028 +#define MT_EFUSE_DATA(_n) (MT_EFUSE_DATA_BASE + ((_n) << 2)) + +#define MT_COEXCFG0 0x0040 +#define MT_COEXCFG0_COEX_EN BIT(0) + +#define MT_WLAN_FUN_CTRL 0x0080 +#define MT_WLAN_FUN_CTRL_WLAN_EN BIT(0) +#define MT_WLAN_FUN_CTRL_WLAN_CLK_EN BIT(1) +#define MT_WLAN_FUN_CTRL_WLAN_RESET_RF BIT(2) + +#define MT_WLAN_FUN_CTRL_WLAN_RESET BIT(3) /* MT76x0 */ +#define MT_WLAN_FUN_CTRL_CSR_F20M_CKEN BIT(3) /* MT76x2 */ + +#define MT_WLAN_FUN_CTRL_PCIE_CLK_REQ BIT(4) +#define MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL BIT(5) +#define MT_WLAN_FUN_CTRL_INV_ANT_SEL BIT(6) +#define MT_WLAN_FUN_CTRL_WAKE_HOST BIT(7) + +#define MT_WLAN_FUN_CTRL_THERM_RST BIT(8) /* MT76x2 */ +#define MT_WLAN_FUN_CTRL_THERM_CKEN BIT(9) /* MT76x2 */ + +#define MT_WLAN_FUN_CTRL_GPIO_IN GENMASK(15, 8) /* MT76x0 */ +#define MT_WLAN_FUN_CTRL_GPIO_OUT GENMASK(23, 16) /* MT76x0 */ +#define MT_WLAN_FUN_CTRL_GPIO_OUT_EN GENMASK(31, 24) /* MT76x0 */ + +#define MT_XO_CTRL0 0x0100 +#define MT_XO_CTRL1 0x0104 +#define MT_XO_CTRL2 0x0108 +#define MT_XO_CTRL3 0x010c +#define MT_XO_CTRL4 0x0110 + +#define MT_XO_CTRL5 0x0114 +#define MT_XO_CTRL5_C2_VAL GENMASK(14, 8) + +#define MT_XO_CTRL6 0x0118 +#define MT_XO_CTRL6_C2_CTRL GENMASK(14, 8) + +#define MT_XO_CTRL7 0x011c + +#define MT_WLAN_MTC_CTRL 0x10148 +#define MT_WLAN_MTC_CTRL_MTCMOS_PWR_UP BIT(0) +#define MT_WLAN_MTC_CTRL_PWR_ACK BIT(12) +#define MT_WLAN_MTC_CTRL_PWR_ACK_S BIT(13) +#define MT_WLAN_MTC_CTRL_BBP_MEM_PD GENMASK(19, 16) +#define MT_WLAN_MTC_CTRL_PBF_MEM_PD BIT(20) +#define MT_WLAN_MTC_CTRL_FCE_MEM_PD BIT(21) +#define MT_WLAN_MTC_CTRL_TSO_MEM_PD BIT(22) +#define MT_WLAN_MTC_CTRL_BBP_MEM_RB BIT(24) +#define MT_WLAN_MTC_CTRL_PBF_MEM_RB BIT(25) +#define MT_WLAN_MTC_CTRL_FCE_MEM_RB BIT(26) +#define MT_WLAN_MTC_CTRL_TSO_MEM_RB BIT(27) +#define MT_WLAN_MTC_CTRL_STATE_UP BIT(28) + +#define MT_INT_SOURCE_CSR 0x0200 +#define MT_INT_MASK_CSR 0x0204 + +#define MT_INT_RX_DONE(_n) BIT(_n) +#define MT_INT_RX_DONE_ALL GENMASK(1, 0) +#define MT_INT_TX_DONE_ALL GENMASK(13, 4) +#define MT_INT_TX_DONE(_n) BIT(_n + 4) +#define MT_INT_RX_COHERENT BIT(16) +#define MT_INT_TX_COHERENT BIT(17) +#define MT_INT_ANY_COHERENT BIT(18) +#define MT_INT_MCU_CMD BIT(19) +#define MT_INT_TBTT BIT(20) +#define MT_INT_PRE_TBTT BIT(21) +#define MT_INT_TX_STAT BIT(22) +#define MT_INT_AUTO_WAKEUP BIT(23) +#define MT_INT_GPTIMER BIT(24) +#define MT_INT_RXDELAYINT BIT(26) +#define MT_INT_TXDELAYINT BIT(27) + +#define MT_WPDMA_GLO_CFG 0x0208 +#define MT_WPDMA_GLO_CFG_TX_DMA_EN BIT(0) +#define MT_WPDMA_GLO_CFG_TX_DMA_BUSY BIT(1) +#define MT_WPDMA_GLO_CFG_RX_DMA_EN BIT(2) +#define MT_WPDMA_GLO_CFG_RX_DMA_BUSY BIT(3) +#define MT_WPDMA_GLO_CFG_DMA_BURST_SIZE GENMASK(5, 4) +#define MT_WPDMA_GLO_CFG_TX_WRITEBACK_DONE BIT(6) +#define MT_WPDMA_GLO_CFG_BIG_ENDIAN BIT(7) +#define MT_WPDMA_GLO_CFG_HDR_SEG_LEN GENMASK(15, 8) +#define MT_WPDMA_GLO_CFG_CLK_GATE_DIS BIT(30) +#define MT_WPDMA_GLO_CFG_RX_2B_OFFSET BIT(31) + +#define MT_WPDMA_RST_IDX 0x020c + +#define MT_WPDMA_DELAY_INT_CFG 0x0210 + +#define MT_WMM_AIFSN 0x0214 +#define MT_WMM_AIFSN_MASK GENMASK(3, 0) +#define MT_WMM_AIFSN_SHIFT(_n) ((_n) * 4) + +#define MT_WMM_CWMIN 0x0218 +#define MT_WMM_CWMIN_MASK GENMASK(3, 0) +#define MT_WMM_CWMIN_SHIFT(_n) ((_n) * 4) + +#define MT_WMM_CWMAX 0x021c +#define MT_WMM_CWMAX_MASK GENMASK(3, 0) +#define MT_WMM_CWMAX_SHIFT(_n) ((_n) * 4) + +#define MT_WMM_TXOP_BASE 0x0220 +#define MT_WMM_TXOP(_n) (MT_WMM_TXOP_BASE + (((_n) / 2) << 2)) +#define MT_WMM_TXOP_SHIFT(_n) ((_n & 1) * 16) +#define MT_WMM_TXOP_MASK GENMASK(15, 0) + +#define MT_FCE_DMA_ADDR 0x0230 +#define MT_FCE_DMA_LEN 0x0234 + +#define MT_USB_DMA_CFG 0x238 +#define MT_USB_DMA_CFG_RX_BULK_AGG_TOUT GENMASK(7, 0) +#define MT_USB_DMA_CFG_RX_BULK_AGG_LMT GENMASK(15, 8) +#define MT_USB_DMA_CFG_PHY_CLR BIT(16) +#define MT_USB_DMA_CFG_TX_CLR BIT(19) +#define MT_USB_DMA_CFG_TXOP_HALT BIT(20) +#define MT_USB_DMA_CFG_RX_BULK_AGG_EN BIT(21) +#define MT_USB_DMA_CFG_RX_BULK_EN BIT(22) +#define MT_USB_DMA_CFG_TX_BULK_EN BIT(23) +#define MT_USB_DMA_CFG_UDMA_RX_WL_DROP BIT(25) +#define MT_USB_DMA_CFG_EP_OUT_VALID GENMASK(29, 27) +#define MT_USB_DMA_CFG_RX_BUSY BIT(30) +#define MT_USB_DMA_CFG_TX_BUSY BIT(31) + +#define MT_TSO_CTRL 0x0250 +#define MT_HEADER_TRANS_CTRL_REG 0x0260 + +#define MT_US_CYC_CFG 0x02a4 +#define MT_US_CYC_CNT GENMASK(7, 0) + +#define MT_TX_RING_BASE 0x0300 +#define MT_RX_RING_BASE 0x03c0 +#define MT_RING_SIZE 0x10 + +#define MT_TX_HW_QUEUE_MCU 8 +#define MT_TX_HW_QUEUE_MGMT 9 + +#define MT_PBF_SYS_CTRL 0x0400 +#define MT_PBF_SYS_CTRL_MCU_RESET BIT(0) +#define MT_PBF_SYS_CTRL_DMA_RESET BIT(1) +#define MT_PBF_SYS_CTRL_MAC_RESET BIT(2) +#define MT_PBF_SYS_CTRL_PBF_RESET BIT(3) +#define MT_PBF_SYS_CTRL_ASY_RESET BIT(4) + +#define MT_PBF_CFG 0x0404 +#define MT_PBF_CFG_TX0Q_EN BIT(0) +#define MT_PBF_CFG_TX1Q_EN BIT(1) +#define MT_PBF_CFG_TX2Q_EN BIT(2) +#define MT_PBF_CFG_TX3Q_EN BIT(3) +#define MT_PBF_CFG_RX0Q_EN BIT(4) +#define MT_PBF_CFG_RX_DROP_EN BIT(8) + +#define MT_PBF_TX_MAX_PCNT 0x0408 +#define MT_PBF_RX_MAX_PCNT 0x040c + +#define MT_BCN_OFFSET_BASE 0x041c +#define MT_BCN_OFFSET(_n) (MT_BCN_OFFSET_BASE + ((_n) << 2)) + +#define MT_RF_CSR_CFG 0x0500 +#define MT_RF_CSR_CFG_DATA GENMASK(7, 0) +#define MT_RF_CSR_CFG_REG_ID GENMASK(13, 8) +#define MT_RF_CSR_CFG_REG_BANK GENMASK(17, 14) +#define MT_RF_CSR_CFG_WR BIT(30) +#define MT_RF_CSR_CFG_KICK BIT(31) + +#define MT_RF_BYPASS_0 0x0504 +#define MT_RF_BYPASS_1 0x0508 +#define MT_RF_SETTING_0 0x050c + +#define MT_RF_DATA_WRITE 0x0524 + +#define MT_RF_CTRL 0x0528 +#define MT_RF_CTRL_ADDR GENMASK(11, 0) +#define MT_RF_CTRL_WRITE BIT(12) +#define MT_RF_CTRL_BUSY BIT(13) +#define MT_RF_CTRL_IDX BIT(16) + +#define MT_RF_DATA_READ 0x052c + +#define MT_FCE_PSE_CTRL 0x0800 +#define MT_FCE_PARAMETERS 0x0804 +#define MT_FCE_CSO 0x0808 + +#define MT_FCE_L2_STUFF 0x080c +#define MT_FCE_L2_STUFF_HT_L2_EN BIT(0) +#define MT_FCE_L2_STUFF_QOS_L2_EN BIT(1) +#define MT_FCE_L2_STUFF_RX_STUFF_EN BIT(2) +#define MT_FCE_L2_STUFF_TX_STUFF_EN BIT(3) +#define MT_FCE_L2_STUFF_WR_MPDU_LEN_EN BIT(4) +#define MT_FCE_L2_STUFF_MVINV_BSWAP BIT(5) +#define MT_FCE_L2_STUFF_TS_CMD_QSEL_EN GENMASK(15, 8) +#define MT_FCE_L2_STUFF_TS_LEN_EN GENMASK(23, 16) +#define MT_FCE_L2_STUFF_OTHER_PORT GENMASK(25, 24) + +#define MT_FCE_WLAN_FLOW_CONTROL1 0x0824 + +#define MT_TX_CPU_FROM_FCE_BASE_PTR 0x09a0 +#define MT_TX_CPU_FROM_FCE_MAX_COUNT 0x09a4 +#define MT_TX_CPU_FROM_FCE_CPU_DESC_IDX 0x09a8 + +#define MT_FCE_PDMA_GLOBAL_CONF 0x09c4 + +#define MT_PAUSE_ENABLE_CONTROL1 0x0a38 + +#define MT_FCE_SKIP_FS 0x0a6c + +#define MT_MAC_CSR0 0x1000 + +#define MT_MAC_SYS_CTRL 0x1004 +#define MT_MAC_SYS_CTRL_RESET_CSR BIT(0) +#define MT_MAC_SYS_CTRL_RESET_BBP BIT(1) +#define MT_MAC_SYS_CTRL_ENABLE_TX BIT(2) +#define MT_MAC_SYS_CTRL_ENABLE_RX BIT(3) + +#define MT_MAC_ADDR_DW0 0x1008 +#define MT_MAC_ADDR_DW1 0x100c +#define MT_MAC_ADDR_DW1_U2ME_MASK GENMASK(23, 16) + +#define MT_MAC_BSSID_DW0 0x1010 +#define MT_MAC_BSSID_DW1 0x1014 +#define MT_MAC_BSSID_DW1_ADDR GENMASK(15, 0) +#define MT_MAC_BSSID_DW1_MBSS_MODE GENMASK(17, 16) +#define MT_MAC_BSSID_DW1_MBEACON_N GENMASK(20, 18) +#define MT_MAC_BSSID_DW1_MBSS_LOCAL_BIT BIT(21) +#define MT_MAC_BSSID_DW1_MBSS_MODE_B2 BIT(22) +#define MT_MAC_BSSID_DW1_MBEACON_N_B3 BIT(23) +#define MT_MAC_BSSID_DW1_MBSS_IDX_BYTE GENMASK(26, 24) + +#define MT_MAX_LEN_CFG 0x1018 +#define MT_MAX_LEN_CFG_AMPDU GENMASK(13, 12) + +#define MT_BBP_CSR_CFG 0x101c +#define MT_BBP_CSR_CFG_VAL GENMASK(7, 0) +#define MT_BBP_CSR_CFG_REG_NUM GENMASK(15, 8) +#define MT_BBP_CSR_CFG_READ BIT(16) +#define MT_BBP_CSR_CFG_BUSY BIT(17) +#define MT_BBP_CSR_CFG_PAR_DUR BIT(18) +#define MT_BBP_CSR_CFG_RW_MODE BIT(19) + +#define MT_AMPDU_MAX_LEN_20M1S 0x1030 +#define MT_AMPDU_MAX_LEN_20M2S 0x1034 +#define MT_AMPDU_MAX_LEN_40M1S 0x1038 +#define MT_AMPDU_MAX_LEN_40M2S 0x103c +#define MT_AMPDU_MAX_LEN 0x1040 + +#define MT_WCID_DROP_BASE 0x106c +#define MT_WCID_DROP(_n) (MT_WCID_DROP_BASE + ((_n) >> 5) * 4) +#define MT_WCID_DROP_MASK(_n) BIT((_n) % 32) + +#define MT_BCN_BYPASS_MASK 0x108c + +#define MT_MAC_APC_BSSID_BASE 0x1090 +#define MT_MAC_APC_BSSID_L(_n) (MT_MAC_APC_BSSID_BASE + ((_n) * 8)) +#define MT_MAC_APC_BSSID_H(_n) (MT_MAC_APC_BSSID_BASE + ((_n) * 8 + 4)) +#define MT_MAC_APC_BSSID_H_ADDR GENMASK(15, 0) +#define MT_MAC_APC_BSSID0_H_EN BIT(16) + +#define MT_XIFS_TIME_CFG 0x1100 +#define MT_XIFS_TIME_CFG_CCK_SIFS GENMASK(7, 0) +#define MT_XIFS_TIME_CFG_OFDM_SIFS GENMASK(15, 8) +#define MT_XIFS_TIME_CFG_OFDM_XIFS GENMASK(19, 16) +#define MT_XIFS_TIME_CFG_EIFS GENMASK(28, 20) +#define MT_XIFS_TIME_CFG_BB_RXEND_EN BIT(29) + +#define MT_BKOFF_SLOT_CFG 0x1104 +#define MT_BKOFF_SLOT_CFG_SLOTTIME GENMASK(7, 0) +#define MT_BKOFF_SLOT_CFG_CC_DELAY GENMASK(11, 8) + +#define MT_BEACON_TIME_CFG 0x1114 +#define MT_BEACON_TIME_CFG_INTVAL GENMASK(15, 0) +#define MT_BEACON_TIME_CFG_TIMER_EN BIT(16) +#define MT_BEACON_TIME_CFG_SYNC_MODE GENMASK(18, 17) +#define MT_BEACON_TIME_CFG_TBTT_EN BIT(19) +#define MT_BEACON_TIME_CFG_BEACON_TX BIT(20) +#define MT_BEACON_TIME_CFG_TSF_COMP GENMASK(31, 24) + +#define MT_TBTT_SYNC_CFG 0x1118 +#define MT_TBTT_TIMER_CFG 0x1124 + +#define MT_INT_TIMER_CFG 0x1128 +#define MT_INT_TIMER_CFG_PRE_TBTT GENMASK(15, 0) +#define MT_INT_TIMER_CFG_GP_TIMER GENMASK(31, 16) + +#define MT_INT_TIMER_EN 0x112c +#define MT_INT_TIMER_EN_PRE_TBTT_EN BIT(0) +#define MT_INT_TIMER_EN_GP_TIMER_EN BIT(1) + +#define MT_MAC_STATUS 0x1200 +#define MT_MAC_STATUS_TX BIT(0) +#define MT_MAC_STATUS_RX BIT(1) + +#define MT_PWR_PIN_CFG 0x1204 +#define MT_AUX_CLK_CFG 0x120c + +#define MT_BB_PA_MODE_CFG0 0x1214 +#define MT_BB_PA_MODE_CFG1 0x1218 +#define MT_RF_PA_MODE_CFG0 0x121c +#define MT_RF_PA_MODE_CFG1 0x1220 + +#define MT_RF_PA_MODE_ADJ0 0x1228 +#define MT_RF_PA_MODE_ADJ1 0x122c + +#define MT_DACCLK_EN_DLY_CFG 0x1264 + +#define MT_EDCA_CFG_BASE 0x1300 +#define MT_EDCA_CFG_AC(_n) (MT_EDCA_CFG_BASE + ((_n) << 2)) +#define MT_EDCA_CFG_TXOP GENMASK(7, 0) +#define MT_EDCA_CFG_AIFSN GENMASK(11, 8) +#define MT_EDCA_CFG_CWMIN GENMASK(15, 12) +#define MT_EDCA_CFG_CWMAX GENMASK(19, 16) + +#define MT_TX_PWR_CFG_0 0x1314 +#define MT_TX_PWR_CFG_1 0x1318 +#define MT_TX_PWR_CFG_2 0x131c +#define MT_TX_PWR_CFG_3 0x1320 +#define MT_TX_PWR_CFG_4 0x1324 + +#define MT_TX_BAND_CFG 0x132c +#define MT_TX_BAND_CFG_UPPER_40M BIT(0) +#define MT_TX_BAND_CFG_5G BIT(1) +#define MT_TX_BAND_CFG_2G BIT(2) + +#define MT_HT_FBK_TO_LEGACY 0x1384 +#define MT_TX_MPDU_ADJ_INT 0x1388 + +#define MT_TX_PWR_CFG_7 0x13d4 +#define MT_TX_PWR_CFG_8 0x13d8 +#define MT_TX_PWR_CFG_9 0x13dc + +#define MT_TX_SW_CFG0 0x1330 +#define MT_TX_SW_CFG1 0x1334 +#define MT_TX_SW_CFG2 0x1338 + +#define MT_TXOP_CTRL_CFG 0x1340 +#define MT_TXOP_TRUN_EN GENMASK(5, 0) +#define MT_TXOP_EXT_CCA_DLY GENMASK(15, 8) +#define MT_TXOP_CTRL + +#define MT_TX_RTS_CFG 0x1344 +#define MT_TX_RTS_CFG_RETRY_LIMIT GENMASK(7, 0) +#define MT_TX_RTS_CFG_THRESH GENMASK(23, 8) +#define MT_TX_RTS_FALLBACK BIT(24) + +#define MT_TX_TIMEOUT_CFG 0x1348 +#define MT_TX_RETRY_CFG 0x134c +#define MT_TX_LINK_CFG 0x1350 +#define MT_HT_FBK_CFG0 0x1354 +#define MT_HT_FBK_CFG1 0x1358 +#define MT_LG_FBK_CFG0 0x135c +#define MT_LG_FBK_CFG1 0x1360 + +#define MT_CCK_PROT_CFG 0x1364 +#define MT_OFDM_PROT_CFG 0x1368 +#define MT_MM20_PROT_CFG 0x136c +#define MT_MM40_PROT_CFG 0x1370 +#define MT_GF20_PROT_CFG 0x1374 +#define MT_GF40_PROT_CFG 0x1378 + +#define MT_PROT_RATE GENMASK(15, 0) +#define MT_PROT_CTRL_RTS_CTS BIT(16) +#define MT_PROT_CTRL_CTS2SELF BIT(17) +#define MT_PROT_NAV_SHORT BIT(18) +#define MT_PROT_NAV_LONG BIT(19) +#define MT_PROT_TXOP_ALLOW_CCK BIT(20) +#define MT_PROT_TXOP_ALLOW_OFDM BIT(21) +#define MT_PROT_TXOP_ALLOW_MM20 BIT(22) +#define MT_PROT_TXOP_ALLOW_MM40 BIT(23) +#define MT_PROT_TXOP_ALLOW_GF20 BIT(24) +#define MT_PROT_TXOP_ALLOW_GF40 BIT(25) +#define MT_PROT_RTS_THR_EN BIT(26) +#define MT_PROT_RATE_CCK_11 0x0003 +#define MT_PROT_RATE_OFDM_6 0x4000 +#define MT_PROT_RATE_OFDM_24 0x4004 +#define MT_PROT_RATE_DUP_OFDM_24 0x4084 +#define MT_PROT_TXOP_ALLOW_ALL GENMASK(25, 20) +#define MT_PROT_TXOP_ALLOW_BW20 (MT_PROT_TXOP_ALLOW_ALL & \ + ~MT_PROT_TXOP_ALLOW_MM40 & \ + ~MT_PROT_TXOP_ALLOW_GF40) + +#define MT_EXP_ACK_TIME 0x1380 + +#define MT_TX_PWR_CFG_0_EXT 0x1390 +#define MT_TX_PWR_CFG_1_EXT 0x1394 + +#define MT_TX_FBK_LIMIT 0x1398 +#define MT_TX_FBK_LIMIT_MPDU_FBK GENMASK(7, 0) +#define MT_TX_FBK_LIMIT_AMPDU_FBK GENMASK(15, 8) +#define MT_TX_FBK_LIMIT_MPDU_UP_CLEAR BIT(16) +#define MT_TX_FBK_LIMIT_AMPDU_UP_CLEAR BIT(17) +#define MT_TX_FBK_LIMIT_RATE_LUT BIT(18) + +#define MT_TX0_RF_GAIN_CORR 0x13a0 +#define MT_TX1_RF_GAIN_CORR 0x13a4 +#define MT_TX0_RF_GAIN_ATTEN 0x13a8 + +#define MT_TX_ALC_CFG_0 0x13b0 +#define MT_TX_ALC_CFG_0_CH_INIT_0 GENMASK(5, 0) +#define MT_TX_ALC_CFG_0_CH_INIT_1 GENMASK(13, 8) +#define MT_TX_ALC_CFG_0_LIMIT_0 GENMASK(21, 16) +#define MT_TX_ALC_CFG_0_LIMIT_1 GENMASK(29, 24) + +#define MT_TX_ALC_CFG_1 0x13b4 +#define MT_TX_ALC_CFG_1_TEMP_COMP GENMASK(5, 0) + +#define MT_TX_ALC_CFG_2 0x13a8 +#define MT_TX_ALC_CFG_2_TEMP_COMP GENMASK(5, 0) + +#define MT_TX0_BB_GAIN_ATTEN 0x13c0 + +#define MT_TX_ALC_VGA3 0x13c8 + +#define MT_TX_PROT_CFG6 0x13e0 +#define MT_TX_PROT_CFG7 0x13e4 +#define MT_TX_PROT_CFG8 0x13e8 + +#define MT_PIFS_TX_CFG 0x13ec + +#define MT_RX_FILTR_CFG 0x1400 + +#define MT_RX_FILTR_CFG_CRC_ERR BIT(0) +#define MT_RX_FILTR_CFG_PHY_ERR BIT(1) +#define MT_RX_FILTR_CFG_PROMISC BIT(2) +#define MT_RX_FILTR_CFG_OTHER_BSS BIT(3) +#define MT_RX_FILTR_CFG_VER_ERR BIT(4) +#define MT_RX_FILTR_CFG_MCAST BIT(5) +#define MT_RX_FILTR_CFG_BCAST BIT(6) +#define MT_RX_FILTR_CFG_DUP BIT(7) +#define MT_RX_FILTR_CFG_CFACK BIT(8) +#define MT_RX_FILTR_CFG_CFEND BIT(9) +#define MT_RX_FILTR_CFG_ACK BIT(10) +#define MT_RX_FILTR_CFG_CTS BIT(11) +#define MT_RX_FILTR_CFG_RTS BIT(12) +#define MT_RX_FILTR_CFG_PSPOLL BIT(13) +#define MT_RX_FILTR_CFG_BA BIT(14) +#define MT_RX_FILTR_CFG_BAR BIT(15) +#define MT_RX_FILTR_CFG_CTRL_RSV BIT(16) + +#define MT_AUTO_RSP_CFG 0x1404 + +#define MT_AUTO_RSP_PREAMB_SHORT BIT(4) + +#define MT_LEGACY_BASIC_RATE 0x1408 +#define MT_HT_BASIC_RATE 0x140c + +#define MT_RX_PARSER_CFG 0x1418 +#define MT_RX_PARSER_RX_SET_NAV_ALL BIT(0) + +#define MT_EXT_CCA_CFG 0x141c +#define MT_EXT_CCA_CFG_CCA0 GENMASK(1, 0) +#define MT_EXT_CCA_CFG_CCA1 GENMASK(3, 2) +#define MT_EXT_CCA_CFG_CCA2 GENMASK(5, 4) +#define MT_EXT_CCA_CFG_CCA3 GENMASK(7, 6) +#define MT_EXT_CCA_CFG_CCA_MASK GENMASK(11, 8) +#define MT_EXT_CCA_CFG_ED_CCA_MASK GENMASK(15, 12) + +#define MT_TX_SW_CFG3 0x1478 + +#define MT_PN_PAD_MODE 0x150c + +#define MT_TXOP_HLDR_ET 0x1608 + +#define MT_PROT_AUTO_TX_CFG 0x1648 + +#define MT_RX_STA_CNT0 0x1700 +#define MT_RX_STA_CNT1 0x1704 +#define MT_RX_STA_CNT2 0x1708 +#define MT_TX_STA_CNT0 0x170c +#define MT_TX_STA_CNT1 0x1710 +#define MT_TX_STA_CNT2 0x1714 + +/* Vendor driver defines content of the second word of STAT_FIFO as follows: + * MT_TX_STAT_FIFO_RATE GENMASK(26, 16) + * MT_TX_STAT_FIFO_ETXBF BIT(27) + * MT_TX_STAT_FIFO_SND BIT(28) + * MT_TX_STAT_FIFO_ITXBF BIT(29) + * However, tests show that b16-31 have the same layout as TXWI rate_ctl + * with rate set to rate at which frame was acked. + */ +#define MT_TX_STAT_FIFO 0x1718 +#define MT_TX_STAT_FIFO_VALID BIT(0) +#define MT_TX_STAT_FIFO_PID_TYPE GENMASK(4, 1) +#define MT_TX_STAT_FIFO_SUCCESS BIT(5) +#define MT_TX_STAT_FIFO_AGGR BIT(6) +#define MT_TX_STAT_FIFO_ACKREQ BIT(7) +#define MT_TX_STAT_FIFO_WCID GENMASK(15, 8) +#define MT_TX_STAT_FIFO_RATE GENMASK(31, 16) + +#define MT_TX_AGG_STAT 0x171c + +#define MT_TX_AGG_CNT_BASE0 0x1720 + +#define MT_MPDU_DENSITY_CNT 0x1740 + +#define MT_TX_AGG_CNT_BASE1 0x174c + +#define MT_TX_AGG_CNT(_id) ((_id) < 8 ? \ + MT_TX_AGG_CNT_BASE0 + ((_id) << 2) : \ + MT_TX_AGG_CNT_BASE1 + ((_id - 8) << 2)) + +#define MT_TX_STAT_FIFO_EXT 0x1798 +#define MT_TX_STAT_FIFO_EXT_RETRY GENMASK(7, 0) + +#define MT_BBP_CORE_BASE 0x2000 +#define MT_BBP_IBI_BASE 0x2100 +#define MT_BBP_AGC_BASE 0x2300 +#define MT_BBP_TXC_BASE 0x2400 +#define MT_BBP_RXC_BASE 0x2500 +#define MT_BBP_TXO_BASE 0x2600 +#define MT_BBP_TXBE_BASE 0x2700 +#define MT_BBP_RXFE_BASE 0x2800 +#define MT_BBP_RXO_BASE 0x2900 +#define MT_BBP_DFS_BASE 0x2a00 +#define MT_BBP_TR_BASE 0x2b00 +#define MT_BBP_CAL_BASE 0x2c00 +#define MT_BBP_DSC_BASE 0x2e00 +#define MT_BBP_PFMU_BASE 0x2f00 + +#define MT_BBP(_type, _n) (MT_BBP_##_type##_BASE + ((_n) << 2)) + +#define MT_BBP_CORE_R1_BW GENMASK(4, 3) + +#define MT_BBP_AGC_R0_CTRL_CHAN GENMASK(9, 8) +#define MT_BBP_AGC_R0_BW GENMASK(14, 12) + +/* AGC, R4/R5 */ +#define MT_BBP_AGC_LNA_GAIN GENMASK(21, 16) + +/* AGC, R8/R9 */ +#define MT_BBP_AGC_GAIN GENMASK(14, 8) + +#define MT_BBP_AGC20_RSSI0 GENMASK(7, 0) +#define MT_BBP_AGC20_RSSI1 GENMASK(15, 8) + +#define MT_BBP_TXBE_R0_CTRL_CHAN GENMASK(1, 0) + +#define MT_WCID_ADDR_BASE 0x1800 +#define MT_WCID_ADDR(_n) (MT_WCID_ADDR_BASE + (_n) * 8) + +#define MT_SRAM_BASE 0x4000 + +#define MT_WCID_KEY_BASE 0x8000 +#define MT_WCID_KEY(_n) (MT_WCID_KEY_BASE + (_n) * 32) + +#define MT_WCID_IV_BASE 0xa000 +#define MT_WCID_IV(_n) (MT_WCID_IV_BASE + (_n) * 8) + +#define MT_WCID_ATTR_BASE 0xa800 +#define MT_WCID_ATTR(_n) (MT_WCID_ATTR_BASE + (_n) * 4) + +#define MT_WCID_ATTR_PAIRWISE BIT(0) +#define MT_WCID_ATTR_PKEY_MODE GENMASK(3, 1) +#define MT_WCID_ATTR_BSS_IDX GENMASK(6, 4) +#define MT_WCID_ATTR_RXWI_UDF GENMASK(9, 7) +#define MT_WCID_ATTR_PKEY_MODE_EXT BIT(10) +#define MT_WCID_ATTR_BSS_IDX_EXT BIT(11) +#define MT_WCID_ATTR_WAPI_MCBC BIT(15) +#define MT_WCID_ATTR_WAPI_KEYID GENMASK(31, 24) + +#define MT_SKEY_BASE_0 0xac00 +#define MT_SKEY_BASE_1 0xb400 +#define MT_SKEY_0(_bss, _idx) \ + (MT_SKEY_BASE_0 + (4 * (_bss) + _idx) * 32) +#define MT_SKEY_1(_bss, _idx) \ + (MT_SKEY_BASE_1 + (4 * ((_bss) & 7) + _idx) * 32) +#define MT_SKEY(_bss, _idx) \ + ((_bss & 8) ? MT_SKEY_1(_bss, _idx) : MT_SKEY_0(_bss, _idx)) + +#define MT_SKEY_MODE_BASE_0 0xb000 +#define MT_SKEY_MODE_BASE_1 0xb3f0 +#define MT_SKEY_MODE_0(_bss) \ + (MT_SKEY_MODE_BASE_0 + ((_bss / 2) << 2)) +#define MT_SKEY_MODE_1(_bss) \ + (MT_SKEY_MODE_BASE_1 + ((((_bss) & 7) / 2) << 2)) +#define MT_SKEY_MODE(_bss) \ + ((_bss & 8) ? MT_SKEY_MODE_1(_bss) : MT_SKEY_MODE_0(_bss)) +#define MT_SKEY_MODE_MASK GENMASK(3, 0) +#define MT_SKEY_MODE_SHIFT(_bss, _idx) (4 * ((_idx) + 4 * (_bss & 1))) + +#define MT_BEACON_BASE 0xc000 + +#define MT_TEMP_SENSOR 0x1d000 +#define MT_TEMP_SENSOR_VAL GENMASK(6, 0) + +enum mt76_cipher_type { + MT_CIPHER_NONE, + MT_CIPHER_WEP40, + MT_CIPHER_WEP104, + MT_CIPHER_TKIP, + MT_CIPHER_AES_CCMP, + MT_CIPHER_CKIP40, + MT_CIPHER_CKIP104, + MT_CIPHER_CKIP128, + MT_CIPHER_WAPI, +}; + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/trace.c b/drivers/net/wireless/mediatek/mt7601u/trace.c new file mode 100644 index 0000000..8abdd3c --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/trace.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#ifndef __CHECKER__ +#define CREATE_TRACE_POINTS +#include "trace.h" + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/trace.h b/drivers/net/wireless/mediatek/mt7601u/trace.h new file mode 100644 index 0000000..2898973 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/trace.h @@ -0,0 +1,400 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if !defined(__MT7601U_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) +#define __MT7601U_TRACE_H + +#include +#include "mt7601u.h" +#include "mac.h" + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM mt7601u + +#define MAXNAME 32 +#define DEV_ENTRY __array(char, wiphy_name, 32) +#define DEV_ASSIGN strlcpy(__entry->wiphy_name, \ + wiphy_name(dev->hw->wiphy), MAXNAME) +#define DEV_PR_FMT "%s " +#define DEV_PR_ARG __entry->wiphy_name + +#define REG_ENTRY __field(u32, reg) __field(u32, val) +#define REG_ASSIGN __entry->reg = reg; __entry->val = val +#define REG_PR_FMT "%04x=%08x" +#define REG_PR_ARG __entry->reg, __entry->val + +DECLARE_EVENT_CLASS(dev_reg_evt, + TP_PROTO(struct mt7601u_dev *dev, u32 reg, u32 val), + TP_ARGS(dev, reg, val), + TP_STRUCT__entry( + DEV_ENTRY + REG_ENTRY + ), + TP_fast_assign( + DEV_ASSIGN; + REG_ASSIGN; + ), + TP_printk( + DEV_PR_FMT REG_PR_FMT, + DEV_PR_ARG, REG_PR_ARG + ) +); + +DEFINE_EVENT(dev_reg_evt, reg_read, + TP_PROTO(struct mt7601u_dev *dev, u32 reg, u32 val), + TP_ARGS(dev, reg, val) +); + +DEFINE_EVENT(dev_reg_evt, reg_write, + TP_PROTO(struct mt7601u_dev *dev, u32 reg, u32 val), + TP_ARGS(dev, reg, val) +); + +TRACE_EVENT(mt_submit_urb, + TP_PROTO(struct mt7601u_dev *dev, struct urb *u), + TP_ARGS(dev, u), + TP_STRUCT__entry( + DEV_ENTRY __field(unsigned, pipe) __field(u32, len) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->pipe = u->pipe; + __entry->len = u->transfer_buffer_length; + ), + TP_printk(DEV_PR_FMT "p:%08x len:%u", + DEV_PR_ARG, __entry->pipe, __entry->len) +); + +#define trace_mt_submit_urb_sync(__dev, __pipe, __len) ({ \ + struct urb u; \ + u.pipe = __pipe; \ + u.transfer_buffer_length = __len; \ + trace_mt_submit_urb(__dev, &u); \ +}) + +TRACE_EVENT(mt_mcu_msg_send, + TP_PROTO(struct mt7601u_dev *dev, + struct sk_buff *skb, u32 csum, bool resp), + TP_ARGS(dev, skb, csum, resp), + TP_STRUCT__entry( + DEV_ENTRY + __field(u32, info) + __field(u32, csum) + __field(bool, resp) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->info = *(u32 *)skb->data; + __entry->csum = csum; + __entry->resp = resp; + ), + TP_printk(DEV_PR_FMT "i:%08x c:%08x r:%d", + DEV_PR_ARG, __entry->info, __entry->csum, __entry->resp) +); + +TRACE_EVENT(mt_vend_req, + TP_PROTO(struct mt7601u_dev *dev, unsigned pipe, u8 req, u8 req_type, + u16 val, u16 offset, void *buf, size_t buflen, int ret), + TP_ARGS(dev, pipe, req, req_type, val, offset, buf, buflen, ret), + TP_STRUCT__entry( + DEV_ENTRY + __field(unsigned, pipe) __field(u8, req) __field(u8, req_type) + __field(u16, val) __field(u16, offset) __field(void*, buf) + __field(int, buflen) __field(int, ret) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->pipe = pipe; + __entry->req = req; + __entry->req_type = req_type; + __entry->val = val; + __entry->offset = offset; + __entry->buf = buf; + __entry->buflen = buflen; + __entry->ret = ret; + ), + TP_printk(DEV_PR_FMT + "%d p:%08x req:%02hhx %02hhx val:%04hx %04hx buf:%d %d", + DEV_PR_ARG, __entry->ret, __entry->pipe, __entry->req, + __entry->req_type, __entry->val, __entry->offset, + !!__entry->buf, __entry->buflen) +); + +TRACE_EVENT(ee_read, + TP_PROTO(struct mt7601u_dev *dev, int offset, u16 val), + TP_ARGS(dev, offset, val), + TP_STRUCT__entry( + DEV_ENTRY + __field(int, o) __field(u16, v) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->o = offset; + __entry->v = val; + ), + TP_printk(DEV_PR_FMT "%04x=%04x", DEV_PR_ARG, __entry->o, __entry->v) +); + +DECLARE_EVENT_CLASS(dev_rf_reg_evt, + TP_PROTO(struct mt7601u_dev *dev, u8 bank, u8 reg, u8 val), + TP_ARGS(dev, bank, reg, val), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, bank) + __field(u8, reg) + __field(u8, val) + ), + TP_fast_assign( + DEV_ASSIGN; + REG_ASSIGN; + __entry->bank = bank; + ), + TP_printk( + DEV_PR_FMT "%02hhx:%02hhx=%02hhx", + DEV_PR_ARG, __entry->bank, __entry->reg, __entry->val + ) +); + +DEFINE_EVENT(dev_rf_reg_evt, rf_read, + TP_PROTO(struct mt7601u_dev *dev, u8 bank, u8 reg, u8 val), + TP_ARGS(dev, bank, reg, val) +); + +DEFINE_EVENT(dev_rf_reg_evt, rf_write, + TP_PROTO(struct mt7601u_dev *dev, u8 bank, u8 reg, u8 val), + TP_ARGS(dev, bank, reg, val) +); + +DECLARE_EVENT_CLASS(dev_bbp_reg_evt, + TP_PROTO(struct mt7601u_dev *dev, u8 reg, u8 val), + TP_ARGS(dev, reg, val), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, reg) + __field(u8, val) + ), + TP_fast_assign( + DEV_ASSIGN; + REG_ASSIGN; + ), + TP_printk( + DEV_PR_FMT "%02hhx=%02hhx", + DEV_PR_ARG, __entry->reg, __entry->val + ) +); + +DEFINE_EVENT(dev_bbp_reg_evt, bbp_read, + TP_PROTO(struct mt7601u_dev *dev, u8 reg, u8 val), + TP_ARGS(dev, reg, val) +); + +DEFINE_EVENT(dev_bbp_reg_evt, bbp_write, + TP_PROTO(struct mt7601u_dev *dev, u8 reg, u8 val), + TP_ARGS(dev, reg, val) +); + +DECLARE_EVENT_CLASS(dev_simple_evt, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, val) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->val = val; + ), + TP_printk( + DEV_PR_FMT "%02hhx", DEV_PR_ARG, __entry->val + ) +); + +DEFINE_EVENT(dev_simple_evt, temp_mode, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val) +); + +DEFINE_EVENT(dev_simple_evt, read_temp, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val) +); + +DEFINE_EVENT(dev_simple_evt, freq_cal_adjust, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val) +); + +TRACE_EVENT(freq_cal_offset, + TP_PROTO(struct mt7601u_dev *dev, u8 phy_mode, s8 freq_off), + TP_ARGS(dev, phy_mode, freq_off), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, phy_mode) + __field(s8, freq_off) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->phy_mode = phy_mode; + __entry->freq_off = freq_off; + ), + TP_printk(DEV_PR_FMT "phy:%02hhx off:%02hhx", + DEV_PR_ARG, __entry->phy_mode, __entry->freq_off) +); + +TRACE_EVENT(mt_rx, + TP_PROTO(struct mt7601u_dev *dev, struct mt7601u_rxwi *rxwi, u32 f), + TP_ARGS(dev, rxwi, f), + TP_STRUCT__entry( + DEV_ENTRY + __field_struct(struct mt7601u_rxwi, rxwi) + __field(u32, fce_info) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->rxwi = *rxwi; + __entry->fce_info = f; + ), + TP_printk(DEV_PR_FMT "rxi:%08x ctl:%08x frag_sn:%04hx rate:%04hx " + "uknw:%02hhx z:%02hhx%02hhx%02hhx snr:%02hhx " + "ant:%02hhx gain:%02hhx freq_o:%02hhx " + "r:%08x ea:%08x fce:%08x", DEV_PR_ARG, + le32_to_cpu(__entry->rxwi.rxinfo), + le32_to_cpu(__entry->rxwi.ctl), + le16_to_cpu(__entry->rxwi.frag_sn), + le16_to_cpu(__entry->rxwi.rate), + __entry->rxwi.unknown, + __entry->rxwi.zero[0], __entry->rxwi.zero[1], + __entry->rxwi.zero[2], + __entry->rxwi.snr, __entry->rxwi.ant, + __entry->rxwi.gain, __entry->rxwi.freq_off, + __entry->rxwi.resv2, __entry->rxwi.expert_ant, + __entry->fce_info) +); + +TRACE_EVENT(mt_tx, + TP_PROTO(struct mt7601u_dev *dev, struct sk_buff *skb, + struct mt76_sta *sta, struct mt76_txwi *h), + TP_ARGS(dev, skb, sta, h), + TP_STRUCT__entry( + DEV_ENTRY + __field_struct(struct mt76_txwi, h) + __field(struct sk_buff *, skb) + __field(struct mt76_sta *, sta) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->h = *h; + __entry->skb = skb; + __entry->sta = sta; + ), + TP_printk(DEV_PR_FMT "skb:%p sta:%p flg:%04hx rate_ctl:%04hx " + "ack:%02hhx wcid:%02hhx len_ctl:%05hx", DEV_PR_ARG, + __entry->skb, __entry->sta, + le16_to_cpu(__entry->h.flags), + le16_to_cpu(__entry->h.rate_ctl), + __entry->h.ack_ctl, __entry->h.wcid, + le16_to_cpu(__entry->h.len_ctl)) +); + +TRACE_EVENT(mt_tx_dma_done, + TP_PROTO(struct mt7601u_dev *dev, struct sk_buff *skb), + TP_ARGS(dev, skb), + TP_STRUCT__entry( + DEV_ENTRY + __field(struct sk_buff *, skb) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->skb = skb; + ), + TP_printk(DEV_PR_FMT "%p", DEV_PR_ARG, __entry->skb) +); + +TRACE_EVENT(mt_tx_status_cleaned, + TP_PROTO(struct mt7601u_dev *dev, int cleaned), + TP_ARGS(dev, cleaned), + TP_STRUCT__entry( + DEV_ENTRY + __field(int, cleaned) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->cleaned = cleaned; + ), + TP_printk(DEV_PR_FMT "%d", DEV_PR_ARG, __entry->cleaned) +); + +TRACE_EVENT(mt_tx_status, + TP_PROTO(struct mt7601u_dev *dev, u32 stat1, u32 stat2), + TP_ARGS(dev, stat1, stat2), + TP_STRUCT__entry( + DEV_ENTRY + __field(u32, stat1) __field(u32, stat2) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->stat1 = stat1; + __entry->stat2 = stat2; + ), + TP_printk(DEV_PR_FMT "%08x %08x", + DEV_PR_ARG, __entry->stat1, __entry->stat2) +); + +TRACE_EVENT(mt_rx_dma_aggr, + TP_PROTO(struct mt7601u_dev *dev, int cnt, bool paged), + TP_ARGS(dev, cnt, paged), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, cnt) + __field(bool, paged) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->cnt = cnt; + __entry->paged = paged; + ), + TP_printk(DEV_PR_FMT "cnt:%d paged:%d", + DEV_PR_ARG, __entry->cnt, __entry->paged) +); + +DEFINE_EVENT(dev_simple_evt, set_key, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val) +); + +TRACE_EVENT(set_shared_key, + TP_PROTO(struct mt7601u_dev *dev, u8 vid, u8 key), + TP_ARGS(dev, vid, key), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, vid) + __field(u8, key) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->vid = vid; + __entry->key = key; + ), + TP_printk(DEV_PR_FMT "phy:%02hhx off:%02hhx", + DEV_PR_ARG, __entry->vid, __entry->key) +); + +#endif + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include diff --git a/drivers/net/wireless/mediatek/mt7601u/tx.c b/drivers/net/wireless/mediatek/mt7601u/tx.c new file mode 100644 index 0000000..0be2080 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/tx.c @@ -0,0 +1,319 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "trace.h" + +enum mt76_txq_id { + MT_TXQ_VO = IEEE80211_AC_VO, + MT_TXQ_VI = IEEE80211_AC_VI, + MT_TXQ_BE = IEEE80211_AC_BE, + MT_TXQ_BK = IEEE80211_AC_BK, + MT_TXQ_PSD, + MT_TXQ_MCU, + __MT_TXQ_MAX +}; + +/* Hardware uses mirrored order of queues with Q0 having the highest priority */ +static u8 q2hwq(u8 q) +{ + return q ^ 0x3; +} + +/* Take mac80211 Q id from the skb and translate it to hardware Q id */ +static u8 skb2q(struct sk_buff *skb) +{ + int qid = skb_get_queue_mapping(skb); + + if (WARN_ON(qid >= MT_TXQ_PSD)) { + qid = MT_TXQ_BE; + skb_set_queue_mapping(skb, qid); + } + + return q2hwq(qid); +} + +/* Note: TX retry reporting is a bit broken. + * Retries are reported only once per AMPDU and often come a frame early + * i.e. they are reported in the last status preceding the AMPDU. Apart + * from the fact that it's hard to know the length of the AMPDU (which is + * required to know to how many consecutive frames retries should be + * applied), if status comes early on full FIFO it gets lost and retries + * of the whole AMPDU become invisible. + * As a work-around encode the desired rate in PKT_ID of TX descriptor + * and based on that guess the retries (every rate is tried once). + * Only downside here is that for MCS0 we have to rely solely on + * transmission failures as no retries can ever be reported. + * Not having to read EXT_FIFO has a nice effect of doubling the number + * of reports which can be fetched. + * Also the vendor driver never uses the EXT_FIFO register so it may be + * undertested. + */ +static u8 mt7601u_tx_pktid_enc(struct mt7601u_dev *dev, u8 rate, bool is_probe) +{ + u8 encoded = (rate + 1) + is_probe * 8; + + /* Because PKT_ID 0 disables status reporting only 15 values are + * available but 16 are needed (8 MCS * 2 for encoding is_probe) + * - we need to cram together two rates. MCS0 and MCS7 with is_probe + * share PKT_ID 9. + */ + if (is_probe && rate == 7) + return encoded - 7; + + return encoded; +} + +static void +mt7601u_tx_pktid_dec(struct mt7601u_dev *dev, struct mt76_tx_status *stat) +{ + u8 req_rate = stat->pktid; + u8 eff_rate = stat->rate & 0x7; + + req_rate -= 1; + + if (req_rate > 7) { + stat->is_probe = true; + req_rate -= 8; + + /* Decide between MCS0 and MCS7 which share pktid 9 */ + if (!req_rate && eff_rate) + req_rate = 7; + } + + stat->retry = req_rate - eff_rate; +} + +static void mt7601u_tx_skb_remove_dma_overhead(struct sk_buff *skb, + struct ieee80211_tx_info *info) +{ + int pkt_len = (unsigned long)info->status.status_driver_data[0]; + + skb_pull(skb, sizeof(struct mt76_txwi) + 4); + if (ieee80211_get_hdrlen_from_skb(skb) % 4) + mt76_remove_hdr_pad(skb); + + skb_trim(skb, pkt_len); +} + +void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + mt7601u_tx_skb_remove_dma_overhead(skb, info); + + ieee80211_tx_info_clear_status(info); + info->status.rates[0].idx = -1; + info->flags |= IEEE80211_TX_STAT_ACK; + ieee80211_tx_status(dev->hw, skb); +} + +static int mt7601u_skb_rooms(struct mt7601u_dev *dev, struct sk_buff *skb) +{ + int hdr_len = ieee80211_get_hdrlen_from_skb(skb); + u32 need_head; + + need_head = sizeof(struct mt76_txwi) + 4; + if (hdr_len % 4) + need_head += 2; + + return skb_cow(skb, need_head); +} + +static struct mt76_txwi * +mt7601u_push_txwi(struct mt7601u_dev *dev, struct sk_buff *skb, + struct ieee80211_sta *sta, struct mt76_wcid *wcid, + int pkt_len) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_tx_rate *rate = &info->control.rates[0]; + struct mt76_txwi *txwi; + unsigned long flags; + bool is_probe; + u32 pkt_id; + u16 rate_ctl; + u8 nss; + + txwi = (struct mt76_txwi *)skb_push(skb, sizeof(struct mt76_txwi)); + memset(txwi, 0, sizeof(*txwi)); + + if (!wcid->tx_rate_set) + ieee80211_get_tx_rates(info->control.vif, sta, skb, + info->control.rates, 1); + + spin_lock_irqsave(&dev->lock, flags); + if (rate->idx < 0 || !rate->count) + rate_ctl = wcid->tx_rate; + else + rate_ctl = mt76_mac_tx_rate_val(dev, rate, &nss); + spin_unlock_irqrestore(&dev->lock, flags); + txwi->rate_ctl = cpu_to_le16(rate_ctl); + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) + txwi->ack_ctl |= MT_TXWI_ACK_CTL_REQ; + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) + txwi->ack_ctl |= MT_TXWI_ACK_CTL_NSEQ; + + if ((info->flags & IEEE80211_TX_CTL_AMPDU) && sta) { + u8 ba_size = IEEE80211_MIN_AMPDU_BUF; + + ba_size <<= sta->ht_cap.ampdu_factor; + ba_size = min_t(int, 63, ba_size); + if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) + ba_size = 0; + txwi->ack_ctl |= MT76_SET(MT_TXWI_ACK_CTL_BA_WINDOW, ba_size); + + txwi->flags = cpu_to_le16(MT_TXWI_FLAGS_AMPDU | + MT76_SET(MT_TXWI_FLAGS_MPDU_DENSITY, + sta->ht_cap.ampdu_density)); + if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) + txwi->flags = 0; + } + + txwi->wcid = wcid->idx; + + is_probe = !!(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); + pkt_id = mt7601u_tx_pktid_enc(dev, rate_ctl & 0x7, is_probe); + pkt_len |= MT76_SET(MT_TXWI_LEN_PKTID, pkt_id); + txwi->len_ctl = cpu_to_le16(pkt_len); + + return txwi; +} + +void mt7601u_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct mt7601u_dev *dev = hw->priv; + struct ieee80211_vif *vif = info->control.vif; + struct ieee80211_sta *sta = control->sta; + struct mt76_sta *msta = NULL; + struct mt76_wcid *wcid = dev->mon_wcid; + struct mt76_txwi *txwi; + int pkt_len = skb->len; + int hw_q = skb2q(skb); + + BUILD_BUG_ON(ARRAY_SIZE(info->status.status_driver_data) < 1); + info->status.status_driver_data[0] = (void *)(unsigned long)pkt_len; + + if (mt7601u_skb_rooms(dev, skb) || mt76_insert_hdr_pad(skb)) { + ieee80211_free_txskb(dev->hw, skb); + return; + } + + if (sta) { + msta = (struct mt76_sta *) sta->drv_priv; + wcid = &msta->wcid; + } else if (vif) { + struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv; + + wcid = &mvif->group_wcid; + } + + txwi = mt7601u_push_txwi(dev, skb, sta, wcid, pkt_len); + + if (mt7601u_dma_enqueue_tx(dev, skb, wcid, hw_q)) + return; + + trace_mt_tx(dev, skb, msta, txwi); +} + +void mt7601u_tx_stat(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + stat_work.work); + struct mt76_tx_status stat; + unsigned long flags; + int cleaned = 0; + + while (!test_bit(MT7601U_STATE_REMOVED, &dev->state)) { + stat = mt7601u_mac_fetch_tx_status(dev); + if (!stat.valid) + break; + + mt7601u_tx_pktid_dec(dev, &stat); + mt76_send_tx_status(dev, &stat); + + cleaned++; + } + trace_mt_tx_status_cleaned(dev, cleaned); + + spin_lock_irqsave(&dev->tx_lock, flags); + if (cleaned) + queue_delayed_work(dev->stat_wq, &dev->stat_work, + msecs_to_jiffies(10)); + else if (test_and_clear_bit(MT7601U_STATE_MORE_STATS, &dev->state)) + queue_delayed_work(dev->stat_wq, &dev->stat_work, + msecs_to_jiffies(20)); + else + clear_bit(MT7601U_STATE_READING_STATS, &dev->state); + spin_unlock_irqrestore(&dev->tx_lock, flags); +} + +int mt7601u_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + u16 queue, const struct ieee80211_tx_queue_params *params) +{ + struct mt7601u_dev *dev = hw->priv; + u8 cw_min = 5, cw_max = 10, hw_q = q2hwq(queue); + u32 val; + + /* TODO: should we do funny things with the parameters? + * See what mt7601u_set_default_edca() used to do in init.c. + */ + + if (params->cw_min) + cw_min = fls(params->cw_min); + if (params->cw_max) + cw_max = fls(params->cw_max); + + WARN_ON(params->txop > 0xff); + WARN_ON(params->aifs > 0xf); + WARN_ON(cw_min > 0xf); + WARN_ON(cw_max > 0xf); + + val = MT76_SET(MT_EDCA_CFG_AIFSN, params->aifs) | + MT76_SET(MT_EDCA_CFG_CWMIN, cw_min) | + MT76_SET(MT_EDCA_CFG_CWMAX, cw_max); + /* TODO: based on user-controlled EnableTxBurst var vendor drv sets + * a really long txop on AC0 (see connect.c:2009) but only on + * connect? When not connected should be 0. + */ + if (!hw_q) + val |= 0x60; + else + val |= MT76_SET(MT_EDCA_CFG_TXOP, params->txop); + mt76_wr(dev, MT_EDCA_CFG_AC(hw_q), val); + + val = mt76_rr(dev, MT_WMM_TXOP(hw_q)); + val &= ~(MT_WMM_TXOP_MASK << MT_WMM_TXOP_SHIFT(hw_q)); + val |= params->txop << MT_WMM_TXOP_SHIFT(hw_q); + mt76_wr(dev, MT_WMM_TXOP(hw_q), val); + + val = mt76_rr(dev, MT_WMM_AIFSN); + val &= ~(MT_WMM_AIFSN_MASK << MT_WMM_AIFSN_SHIFT(hw_q)); + val |= params->aifs << MT_WMM_AIFSN_SHIFT(hw_q); + mt76_wr(dev, MT_WMM_AIFSN, val); + + val = mt76_rr(dev, MT_WMM_CWMIN); + val &= ~(MT_WMM_CWMIN_MASK << MT_WMM_CWMIN_SHIFT(hw_q)); + val |= cw_min << MT_WMM_CWMIN_SHIFT(hw_q); + mt76_wr(dev, MT_WMM_CWMIN, val); + + val = mt76_rr(dev, MT_WMM_CWMAX); + val &= ~(MT_WMM_CWMAX_MASK << MT_WMM_CWMAX_SHIFT(hw_q)); + val |= cw_max << MT_WMM_CWMAX_SHIFT(hw_q); + mt76_wr(dev, MT_WMM_CWMAX, val); + + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/usb.c b/drivers/net/wireless/mediatek/mt7601u/usb.c new file mode 100644 index 0000000..54dba40 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/usb.c @@ -0,0 +1,367 @@ +/* + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include "mt7601u.h" +#include "usb.h" +#include "trace.h" + +static struct usb_device_id mt7601u_device_table[] = { + { USB_DEVICE(0x0b05, 0x17d3) }, + { USB_DEVICE(0x0e8d, 0x760a) }, + { USB_DEVICE(0x0e8d, 0x760b) }, + { USB_DEVICE(0x13d3, 0x3431) }, + { USB_DEVICE(0x13d3, 0x3434) }, + { USB_DEVICE(0x148f, 0x7601) }, + { USB_DEVICE(0x148f, 0x760a) }, + { USB_DEVICE(0x148f, 0x760b) }, + { USB_DEVICE(0x148f, 0x760c) }, + { USB_DEVICE(0x148f, 0x760d) }, + { USB_DEVICE(0x2001, 0x3d04) }, + { USB_DEVICE(0x2717, 0x4106) }, + { USB_DEVICE(0x2955, 0x0001) }, + { USB_DEVICE(0x2955, 0x1001) }, + { USB_DEVICE(0x2a5f, 0x1000) }, + { USB_DEVICE(0x7392, 0x7710) }, + { 0, } +}; + +bool mt7601u_usb_alloc_buf(struct mt7601u_dev *dev, size_t len, + struct mt7601u_dma_buf *buf) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + + buf->len = len; + buf->urb = usb_alloc_urb(0, GFP_KERNEL); + buf->buf = usb_alloc_coherent(usb_dev, buf->len, GFP_KERNEL, &buf->dma); + + return !buf->urb || !buf->buf; +} + +void mt7601u_usb_free_buf(struct mt7601u_dev *dev, struct mt7601u_dma_buf *buf) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + + usb_free_coherent(usb_dev, buf->len, buf->buf, buf->dma); + usb_free_urb(buf->urb); +} + +int mt7601u_usb_submit_buf(struct mt7601u_dev *dev, int dir, int ep_idx, + struct mt7601u_dma_buf *buf, gfp_t gfp, + usb_complete_t complete_fn, void *context) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + unsigned pipe; + int ret; + + if (dir == USB_DIR_IN) + pipe = usb_rcvbulkpipe(usb_dev, dev->in_eps[ep_idx]); + else + pipe = usb_sndbulkpipe(usb_dev, dev->out_eps[ep_idx]); + + usb_fill_bulk_urb(buf->urb, usb_dev, pipe, buf->buf, buf->len, + complete_fn, context); + buf->urb->transfer_dma = buf->dma; + buf->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + trace_mt_submit_urb(dev, buf->urb); + ret = usb_submit_urb(buf->urb, gfp); + if (ret) + dev_err(dev->dev, "Error: submit URB dir:%d ep:%d failed:%d\n", + dir, ep_idx, ret); + return ret; +} + +void mt7601u_complete_urb(struct urb *urb) +{ + struct completion *cmpl = urb->context; + + complete(cmpl); +} + +static int +__mt7601u_vendor_request(struct mt7601u_dev *dev, const u8 req, + const u8 direction, const u16 val, const u16 offset, + void *buf, const size_t buflen) +{ + int i, ret; + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + const u8 req_type = direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + const unsigned int pipe = (direction == USB_DIR_IN) ? + usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); + + for (i = 0; i < MT_VEND_REQ_MAX_RETRY; i++) { + ret = usb_control_msg(usb_dev, pipe, req, req_type, + val, offset, buf, buflen, + MT_VEND_REQ_TOUT_MS); + trace_mt_vend_req(dev, pipe, req, req_type, val, offset, + buf, buflen, ret); + + if (ret >= 0 || ret == -ENODEV) + return ret; + + msleep(5); + } + + dev_err(dev->dev, "Vendor request req:%02x off:%04x failed:%d\n", + req, offset, ret); + + return ret; +} + +int +mt7601u_vendor_request(struct mt7601u_dev *dev, const u8 req, + const u8 direction, const u16 val, const u16 offset, + void *buf, const size_t buflen) +{ + int ret; + + mutex_lock(&dev->vendor_req_mutex); + + ret = __mt7601u_vendor_request(dev, req, direction, val, offset, + buf, buflen); + if (ret == -ENODEV) + set_bit(MT7601U_STATE_REMOVED, &dev->state); + + mutex_unlock(&dev->vendor_req_mutex); + + return ret; +} + +void mt7601u_vendor_reset(struct mt7601u_dev *dev) +{ + mt7601u_vendor_request(dev, MT_VEND_DEV_MODE, USB_DIR_OUT, + MT_VEND_DEV_MODE_RESET, 0, NULL, 0); +} + +u32 mt7601u_rr(struct mt7601u_dev *dev, u32 offset) +{ + int ret; + __le32 reg; + u32 val; + + WARN_ONCE(offset > USHRT_MAX, "read high off:%08x", offset); + + ret = mt7601u_vendor_request(dev, MT_VEND_MULTI_READ, USB_DIR_IN, + 0, offset, ®, sizeof(reg)); + val = le32_to_cpu(reg); + if (ret > 0 && ret != sizeof(reg)) { + dev_err(dev->dev, "Error: wrong size read:%d off:%08x\n", + ret, offset); + val = ~0; + } + + trace_reg_read(dev, offset, val); + return val; +} + +int mt7601u_vendor_single_wr(struct mt7601u_dev *dev, const u8 req, + const u16 offset, const u32 val) +{ + int ret; + + ret = mt7601u_vendor_request(dev, req, USB_DIR_OUT, + val & 0xffff, offset, NULL, 0); + if (ret) + return ret; + return mt7601u_vendor_request(dev, req, USB_DIR_OUT, + val >> 16, offset + 2, NULL, 0); +} + +void mt7601u_wr(struct mt7601u_dev *dev, u32 offset, u32 val) +{ + WARN_ONCE(offset > USHRT_MAX, "write high off:%08x", offset); + + mt7601u_vendor_single_wr(dev, MT_VEND_WRITE, offset, val); + trace_reg_write(dev, offset, val); +} + +u32 mt7601u_rmw(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val) +{ + val |= mt7601u_rr(dev, offset) & ~mask; + mt7601u_wr(dev, offset, val); + return val; +} + +u32 mt7601u_rmc(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val) +{ + u32 reg = mt7601u_rr(dev, offset); + + val |= reg & ~mask; + if (reg != val) + mt7601u_wr(dev, offset, val); + return val; +} + +void mt7601u_wr_copy(struct mt7601u_dev *dev, u32 offset, + const void *data, int len) +{ + WARN_ONCE(offset & 3, "unaligned write copy off:%08x", offset); + WARN_ONCE(len & 3, "short write copy off:%08x", offset); + + mt7601u_burst_write_regs(dev, offset, data, len / 4); +} + +void mt7601u_addr_wr(struct mt7601u_dev *dev, const u32 offset, const u8 *addr) +{ + mt7601u_wr(dev, offset, get_unaligned_le32(addr)); + mt7601u_wr(dev, offset + 4, addr[4] | addr[5] << 8); +} + +static int mt7601u_assign_pipes(struct usb_interface *usb_intf, + struct mt7601u_dev *dev) +{ + struct usb_endpoint_descriptor *ep_desc; + struct usb_host_interface *intf_desc = usb_intf->cur_altsetting; + unsigned i, ep_i = 0, ep_o = 0; + + BUILD_BUG_ON(sizeof(dev->in_eps) < __MT_EP_IN_MAX); + BUILD_BUG_ON(sizeof(dev->out_eps) < __MT_EP_OUT_MAX); + + for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) { + ep_desc = &intf_desc->endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(ep_desc) && + ep_i++ < __MT_EP_IN_MAX) { + dev->in_eps[ep_i - 1] = usb_endpoint_num(ep_desc); + dev->in_max_packet = usb_endpoint_maxp(ep_desc); + /* Note: this is ignored by usb sub-system but vendor + * code does it. We can drop this at some point. + */ + dev->in_eps[ep_i - 1] |= USB_DIR_IN; + } else if (usb_endpoint_is_bulk_out(ep_desc) && + ep_o++ < __MT_EP_OUT_MAX) { + dev->out_eps[ep_o - 1] = usb_endpoint_num(ep_desc); + dev->out_max_packet = usb_endpoint_maxp(ep_desc); + } + } + + if (ep_i != __MT_EP_IN_MAX || ep_o != __MT_EP_OUT_MAX) { + dev_err(dev->dev, "Error: wrong pipe number in:%d out:%d\n", + ep_i, ep_o); + return -EINVAL; + } + + return 0; +} + +static int mt7601u_probe(struct usb_interface *usb_intf, + const struct usb_device_id *id) +{ + struct usb_device *usb_dev = interface_to_usbdev(usb_intf); + struct mt7601u_dev *dev; + u32 asic_rev, mac_rev; + int ret; + + dev = mt7601u_alloc_device(&usb_intf->dev); + if (!dev) + return -ENOMEM; + + usb_dev = usb_get_dev(usb_dev); + usb_reset_device(usb_dev); + + usb_set_intfdata(usb_intf, dev); + + ret = mt7601u_assign_pipes(usb_intf, dev); + if (ret) + goto err; + ret = mt7601u_wait_asic_ready(dev); + if (ret) + goto err; + + asic_rev = mt7601u_rr(dev, MT_ASIC_VERSION); + mac_rev = mt7601u_rr(dev, MT_MAC_CSR0); + dev_info(dev->dev, "ASIC revision: %08x MAC revision: %08x\n", + asic_rev, mac_rev); + + /* Note: vendor driver skips this check for MT7601U */ + if (!(mt7601u_rr(dev, MT_EFUSE_CTRL) & MT_EFUSE_CTRL_SEL)) + dev_warn(dev->dev, "Warning: eFUSE not present\n"); + + ret = mt7601u_init_hardware(dev); + if (ret) + goto err; + ret = mt7601u_register_device(dev); + if (ret) + goto err_hw; + + set_bit(MT7601U_STATE_INITIALIZED, &dev->state); + + return 0; +err_hw: + mt7601u_cleanup(dev); +err: + usb_set_intfdata(usb_intf, NULL); + usb_put_dev(interface_to_usbdev(usb_intf)); + + destroy_workqueue(dev->stat_wq); + ieee80211_free_hw(dev->hw); + return ret; +} + +static void mt7601u_disconnect(struct usb_interface *usb_intf) +{ + struct mt7601u_dev *dev = usb_get_intfdata(usb_intf); + + ieee80211_unregister_hw(dev->hw); + mt7601u_cleanup(dev); + + usb_set_intfdata(usb_intf, NULL); + usb_put_dev(interface_to_usbdev(usb_intf)); + + destroy_workqueue(dev->stat_wq); + ieee80211_free_hw(dev->hw); +} + +static int mt7601u_suspend(struct usb_interface *usb_intf, pm_message_t state) +{ + struct mt7601u_dev *dev = usb_get_intfdata(usb_intf); + + mt7601u_cleanup(dev); + + return 0; +} + +static int mt7601u_resume(struct usb_interface *usb_intf) +{ + struct mt7601u_dev *dev = usb_get_intfdata(usb_intf); + int ret; + + ret = mt7601u_init_hardware(dev); + if (ret) + return ret; + + set_bit(MT7601U_STATE_INITIALIZED, &dev->state); + + return 0; +} + +MODULE_DEVICE_TABLE(usb, mt7601u_device_table); +MODULE_FIRMWARE(MT7601U_FIRMWARE); +MODULE_LICENSE("GPL"); + +static struct usb_driver mt7601u_driver = { + .name = KBUILD_MODNAME, + .id_table = mt7601u_device_table, + .probe = mt7601u_probe, + .disconnect = mt7601u_disconnect, + .suspend = mt7601u_suspend, + .resume = mt7601u_resume, + .reset_resume = mt7601u_resume, + .soft_unbind = 1, + .disable_hub_initiated_lpm = 1, +}; +module_usb_driver(mt7601u_driver); diff --git a/drivers/net/wireless/mediatek/mt7601u/usb.h b/drivers/net/wireless/mediatek/mt7601u/usb.h new file mode 100644 index 0000000..49e188f --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/usb.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_USB_H +#define __MT7601U_USB_H + +#include "mt7601u.h" + +#define MT7601U_FIRMWARE "mt7601u.bin" + +#define MT_VEND_REQ_MAX_RETRY 10 +#define MT_VEND_REQ_TOUT_MS 300 + +#define MT_VEND_DEV_MODE_RESET 1 + +enum mt_vendor_req { + MT_VEND_DEV_MODE = 1, + MT_VEND_WRITE = 2, + MT_VEND_MULTI_READ = 7, + MT_VEND_WRITE_FCE = 0x42, +}; + +enum mt_usb_ep_in { + MT_EP_IN_PKT_RX, + MT_EP_IN_CMD_RESP, + __MT_EP_IN_MAX, +}; + +enum mt_usb_ep_out { + MT_EP_OUT_INBAND_CMD, + MT_EP_OUT_AC_BK, + MT_EP_OUT_AC_BE, + MT_EP_OUT_AC_VI, + MT_EP_OUT_AC_VO, + MT_EP_OUT_HCCA, + __MT_EP_OUT_MAX, +}; + +static inline struct usb_device *mt7601u_to_usb_dev(struct mt7601u_dev *mt7601u) +{ + return interface_to_usbdev(to_usb_interface(mt7601u->dev)); +} + +static inline bool mt7601u_urb_has_error(struct urb *urb) +{ + return urb->status && + urb->status != -ENOENT && + urb->status != -ECONNRESET && + urb->status != -ESHUTDOWN; +} + +bool mt7601u_usb_alloc_buf(struct mt7601u_dev *dev, size_t len, + struct mt7601u_dma_buf *buf); +void mt7601u_usb_free_buf(struct mt7601u_dev *dev, struct mt7601u_dma_buf *buf); +int mt7601u_usb_submit_buf(struct mt7601u_dev *dev, int dir, int ep_idx, + struct mt7601u_dma_buf *buf, gfp_t gfp, + usb_complete_t complete_fn, void *context); +void mt7601u_complete_urb(struct urb *urb); + +int mt7601u_vendor_request(struct mt7601u_dev *dev, const u8 req, + const u8 direction, const u16 val, const u16 offset, + void *buf, const size_t buflen); +void mt7601u_vendor_reset(struct mt7601u_dev *dev); +int mt7601u_vendor_single_wr(struct mt7601u_dev *dev, const u8 req, + const u16 offset, const u32 val); + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/util.c b/drivers/net/wireless/mediatek/mt7601u/util.c new file mode 100644 index 0000000..7c1787c --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/util.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" + +void mt76_remove_hdr_pad(struct sk_buff *skb) +{ + int len = ieee80211_get_hdrlen_from_skb(skb); + + memmove(skb->data + 2, skb->data, len); + skb_pull(skb, 2); +} + +int mt76_insert_hdr_pad(struct sk_buff *skb) +{ + int len = ieee80211_get_hdrlen_from_skb(skb); + int ret; + + if (len % 4 == 0) + return 0; + + ret = skb_cow(skb, 2); + if (ret) + return ret; + + skb_push(skb, 2); + memmove(skb->data, skb->data + 2, len); + + skb->data[len] = 0; + skb->data[len + 1] = 0; + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/util.h b/drivers/net/wireless/mediatek/mt7601u/util.h new file mode 100644 index 0000000..b89140b --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/util.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2004 - 2009 Ivo van Doorn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT76_UTIL_H +#define __MT76_UTIL_H + +/* + * Power of two check, this will check + * if the mask that has been given contains and contiguous set of bits. + * Note that we cannot use the is_power_of_2() function since this + * check must be done at compile-time. + */ +#define is_power_of_two(x) ( !((x) & ((x)-1)) ) +#define low_bit_mask(x) ( ((x)-1) & ~(x) ) +#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x)) + +/* + * Macros to find first set bit in a variable. + * These macros behave the same as the __ffs() functions but + * the most important difference that this is done during + * compile-time rather then run-time. + */ +#define compile_ffs2(__x) \ + __builtin_choose_expr(((__x) & 0x1), 0, 1) + +#define compile_ffs4(__x) \ + __builtin_choose_expr(((__x) & 0x3), \ + (compile_ffs2((__x))), \ + (compile_ffs2((__x) >> 2) + 2)) + +#define compile_ffs8(__x) \ + __builtin_choose_expr(((__x) & 0xf), \ + (compile_ffs4((__x))), \ + (compile_ffs4((__x) >> 4) + 4)) + +#define compile_ffs16(__x) \ + __builtin_choose_expr(((__x) & 0xff), \ + (compile_ffs8((__x))), \ + (compile_ffs8((__x) >> 8) + 8)) + +#define compile_ffs32(__x) \ + __builtin_choose_expr(((__x) & 0xffff), \ + (compile_ffs16((__x))), \ + (compile_ffs16((__x) >> 16) + 16)) + +/* + * This macro will check the requirements for the FIELD{8,16,32} macros + * The mask should be a constant non-zero contiguous set of bits which + * does not exceed the given typelimit. + */ +#define FIELD_CHECK(__mask) \ + BUILD_BUG_ON(!(__mask) || !is_valid_mask(__mask)) + +#define MT76_SET(_mask, _val) \ + ({ \ + FIELD_CHECK(_mask); \ + (((u32) (_val)) << compile_ffs32(_mask)) & _mask; \ + }) + +#define MT76_GET(_mask, _val) \ + ({ \ + FIELD_CHECK(_mask); \ + (u32) (((_val) & _mask) >> compile_ffs32(_mask)); \ + }) + +#endif diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig new file mode 100644 index 0000000..8db2978 --- /dev/null +++ b/drivers/nvmem/Kconfig @@ -0,0 +1,39 @@ +menuconfig NVMEM + tristate "NVMEM Support" + select REGMAP + help + Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES... + + This framework is designed to provide a generic interface to NVMEM + from both the Linux Kernel and the userspace. + + This driver can also be built as a module. If so, the module + will be called nvmem_core. + + If unsure, say no. + +if NVMEM + +config QCOM_QFPROM + tristate "QCOM QFPROM Support" + depends on ARCH_QCOM || COMPILE_TEST + select REGMAP_MMIO + help + Say y here to enable QFPROM support. The QFPROM provides access + functions for QFPROM data to rest of the drivers via nvmem interface. + + This driver can also be built as a module. If so, the module + will be called nvmem_qfprom. + +config NVMEM_SUNXI_SID + tristate "Allwinner SoCs SID support" + depends on ARCH_SUNXI + select REGMAP_MMIO + help + This is a driver for the 'security ID' available on various Allwinner + devices. + + This driver can also be built as a module. If so, the module + will be called nvmem_sunxi_sid. + +endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile new file mode 100644 index 0000000..4328b93 --- /dev/null +++ b/drivers/nvmem/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for nvmem drivers. +# + +obj-$(CONFIG_NVMEM) += nvmem_core.o +nvmem_core-y := core.o + +# Devices +obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o +nvmem_qfprom-y := qfprom.o +obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o +nvmem_sunxi_sid-y := sunxi_sid.o diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c new file mode 100644 index 0000000..3f0e7b1 --- /dev/null +++ b/drivers/nvmem/core.c @@ -0,0 +1,1052 @@ +/* + * nvmem framework core. + * + * Copyright (C) 2015 Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct nvmem_device { + const char *name; + struct regmap *regmap; + struct module *owner; + struct device dev; + struct bin_attribute bin; + int stride; + int word_size; + int ncells; + int id; + int users; + size_t size; + bool read_only; +}; + +struct nvmem_cell { + const char *name; + int offset; + int bytes; + int bit_offset; + int nbits; + struct nvmem_device *nvmem; + struct list_head node; +}; + +static DEFINE_MUTEX(nvmem_mutex); +static DEFINE_IDA(nvmem_ida); + +static LIST_HEAD(nvmem_cells); +static DEFINE_MUTEX(nvmem_cells_mutex); + +#define to_nvmem_device(d) container_of(d, struct nvmem_device, dev) + +static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t pos, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nvmem_device *nvmem = to_nvmem_device(dev); + int rc; + + /* Stop the user from reading */ + if (pos > nvmem->size) + return 0; + + if (pos + count > nvmem->size) + count = nvmem->size - pos; + + count = round_down(count, nvmem->word_size); + + rc = regmap_raw_read(nvmem->regmap, pos, buf, count); + + if (IS_ERR_VALUE(rc)) + return rc; + + return count; +} + +static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t pos, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nvmem_device *nvmem = to_nvmem_device(dev); + int rc; + + /* Stop the user from writing */ + if (pos > nvmem->size) + return 0; + + if (pos + count > nvmem->size) + count = nvmem->size - pos; + + count = round_down(count, nvmem->word_size); + + rc = regmap_raw_write(nvmem->regmap, pos, buf, count); + + if (IS_ERR_VALUE(rc)) + return rc; + + return count; +} + +/* default read/write permissions */ +static struct bin_attribute bin_attr_template = { + .attr = { + .name = "nvmem", + .mode = S_IRUSR, + }, + .read = bin_attr_nvmem_read, + .write = bin_attr_nvmem_write, +}; + +static void nvmem_release(struct device *dev) +{ + struct nvmem_device *nvmem = to_nvmem_device(dev); + + ida_simple_remove(&nvmem_ida, nvmem->id); + kfree(nvmem); +} + +static const struct device_type nvmem_provider_type = { + .release = nvmem_release, +}; + +static struct bus_type nvmem_bus_type = { + .name = "nvmem", +}; + +static int of_nvmem_match(struct device *dev, void *nvmem_np) +{ + return dev->of_node == nvmem_np; +} + +static struct nvmem_device *of_nvmem_find(struct device_node *nvmem_np) +{ + struct device *d; + + if (!nvmem_np) + return NULL; + + d = bus_find_device(&nvmem_bus_type, NULL, nvmem_np, of_nvmem_match); + + if (!d) + return NULL; + + return to_nvmem_device(d); +} + +static struct nvmem_cell *nvmem_find_cell(const char *cell_id) +{ + struct nvmem_cell *p; + + list_for_each_entry(p, &nvmem_cells, node) + if (p && !strcmp(p->name, cell_id)) + return p; + + return NULL; +} + +static void nvmem_cell_drop(struct nvmem_cell *cell) +{ + mutex_lock(&nvmem_cells_mutex); + list_del(&cell->node); + mutex_unlock(&nvmem_cells_mutex); + kfree(cell); +} + +static void nvmem_device_remove_all_cells(const struct nvmem_device *nvmem) +{ + struct nvmem_cell *cell; + struct list_head *p, *n; + + list_for_each_safe(p, n, &nvmem_cells) { + cell = list_entry(p, struct nvmem_cell, node); + if (cell->nvmem == nvmem) + nvmem_cell_drop(cell); + } +} + +static void nvmem_cell_add(struct nvmem_cell *cell) +{ + mutex_lock(&nvmem_cells_mutex); + list_add_tail(&cell->node, &nvmem_cells); + mutex_unlock(&nvmem_cells_mutex); +} + +static int nvmem_cell_info_to_nvmem_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info, + struct nvmem_cell *cell) +{ + cell->nvmem = nvmem; + cell->offset = info->offset; + cell->bytes = info->bytes; + cell->name = info->name; + + cell->bit_offset = info->bit_offset; + cell->nbits = info->nbits; + + if (cell->nbits) + cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset, + BITS_PER_BYTE); + + if (!IS_ALIGNED(cell->offset, nvmem->stride)) { + dev_err(&nvmem->dev, + "cell %s unaligned to nvmem stride %d\n", + cell->name, nvmem->stride); + return -EINVAL; + } + + return 0; +} + +static int nvmem_add_cells(struct nvmem_device *nvmem, + const struct nvmem_config *cfg) +{ + struct nvmem_cell **cells; + const struct nvmem_cell_info *info = cfg->cells; + int i, rval; + + cells = kcalloc(cfg->ncells, sizeof(*cells), GFP_KERNEL); + if (!cells) + return -ENOMEM; + + for (i = 0; i < cfg->ncells; i++) { + cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL); + if (!cells[i]) { + rval = -ENOMEM; + goto err; + } + + rval = nvmem_cell_info_to_nvmem_cell(nvmem, &info[i], cells[i]); + if (IS_ERR_VALUE(rval)) { + kfree(cells[i]); + goto err; + } + + nvmem_cell_add(cells[i]); + } + + nvmem->ncells = cfg->ncells; + /* remove tmp array */ + kfree(cells); + + return 0; +err: + while (--i) + nvmem_cell_drop(cells[i]); + + return rval; +} + +/** + * nvmem_register() - Register a nvmem device for given nvmem_config. + * Also creates an binary entry in /sys/bus/nvmem/devices/dev-name/nvmem + * + * @config: nvmem device configuration with which nvmem device is created. + * + * Return: Will be an ERR_PTR() on error or a valid pointer to nvmem_device + * on success. + */ + +struct nvmem_device *nvmem_register(const struct nvmem_config *config) +{ + struct nvmem_device *nvmem; + struct device_node *np; + struct regmap *rm; + int rval; + + if (!config->dev) + return ERR_PTR(-EINVAL); + + rm = dev_get_regmap(config->dev, NULL); + if (!rm) { + dev_err(config->dev, "Regmap not found\n"); + return ERR_PTR(-EINVAL); + } + + nvmem = kzalloc(sizeof(*nvmem), GFP_KERNEL); + if (!nvmem) + return ERR_PTR(-ENOMEM); + + rval = ida_simple_get(&nvmem_ida, 0, 0, GFP_KERNEL); + if (rval < 0) { + kfree(nvmem); + return ERR_PTR(rval); + } + + nvmem->id = rval; + nvmem->regmap = rm; + nvmem->owner = config->owner; + nvmem->stride = regmap_get_reg_stride(rm); + nvmem->word_size = regmap_get_val_bytes(rm); + nvmem->size = regmap_get_max_register(rm) + nvmem->stride; + nvmem->dev.type = &nvmem_provider_type; + nvmem->dev.bus = &nvmem_bus_type; + nvmem->dev.parent = config->dev; + np = config->dev->of_node; + nvmem->dev.of_node = np; + dev_set_name(&nvmem->dev, "%s%d", + config->name ? : "nvmem", config->id); + + nvmem->read_only = of_property_read_bool(np, "read-only") | + config->read_only; + nvmem->bin = bin_attr_template; + nvmem->bin.attr.mode = nvmem->read_only ? : (S_IRUSR | S_IWUSR); + nvmem->bin.attr.mode |= config->perm; + nvmem->bin.size = nvmem->size; + device_initialize(&nvmem->dev); + + dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name); + + rval = device_add(&nvmem->dev); + if (rval) { + ida_simple_remove(&nvmem_ida, nvmem->id); + kfree(nvmem); + return ERR_PTR(rval); + } + + rval = device_create_bin_file(&nvmem->dev, &nvmem->bin); + if (rval) + dev_err(&nvmem->dev, "Failed to create nvmem binary file\n"); + + if (config->cells) + nvmem_add_cells(nvmem, config); + + return nvmem; +} +EXPORT_SYMBOL_GPL(nvmem_register); + +/** + * nvmem_unregister() - Unregister previously registered nvmem device + * + * @nvmem: Pointer to previously registered nvmem device. + * + * Return: Will be an negative on error or a zero on success. + */ +int nvmem_unregister(struct nvmem_device *nvmem) +{ + mutex_lock(&nvmem_mutex); + if (nvmem->users) { + mutex_unlock(&nvmem_mutex); + return -EBUSY; + } + mutex_unlock(&nvmem_mutex); + + nvmem_device_remove_all_cells(nvmem); + device_remove_bin_file(&nvmem->dev, &nvmem->bin); + device_del(&nvmem->dev); + + return 0; +} +EXPORT_SYMBOL_GPL(nvmem_unregister); + +static struct nvmem_device *__nvmem_device_get(struct device_node *np, + struct nvmem_cell **cellp, + const char *cell_id) +{ + struct nvmem_device *nvmem = NULL; + + mutex_lock(&nvmem_mutex); + + if (np) { + nvmem = of_nvmem_find(np); + if (!nvmem) { + mutex_unlock(&nvmem_mutex); + return ERR_PTR(-EPROBE_DEFER); + } + } else { + struct nvmem_cell *cell = nvmem_find_cell(cell_id); + + if (cell) { + nvmem = cell->nvmem; + *cellp = cell; + } + + if (!nvmem) { + mutex_unlock(&nvmem_mutex); + return ERR_PTR(-ENOENT); + } + } + + nvmem->users++; + mutex_unlock(&nvmem_mutex); + + if (!try_module_get(nvmem->owner)) { + dev_err(&nvmem->dev, + "could not increase module refcount for cell %s\n", + nvmem->name); + + mutex_lock(&nvmem_mutex); + nvmem->users--; + mutex_unlock(&nvmem_mutex); + + return ERR_PTR(-EINVAL); + } + + return nvmem; +} + +static void __nvmem_device_put(struct nvmem_device *nvmem) +{ + module_put(nvmem->owner); + mutex_lock(&nvmem_mutex); + nvmem->users--; + mutex_unlock(&nvmem_mutex); +} + +static int nvmem_match(struct device *dev, void *data) +{ + return !strcmp(dev_name(dev), data); +} + +static struct nvmem_device *nvmem_find(const char *name) +{ + struct device *d; + + d = bus_find_device(&nvmem_bus_type, NULL, (void *)name, nvmem_match); + + if (!d) + return NULL; + + return to_nvmem_device(d); +} + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +/** + * of_nvmem_device_get() - Get nvmem device from a given id + * + * @dev node: Device tree node that uses the nvmem device + * @id: nvmem name from nvmem-names property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device + * on success. + */ +struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *id) +{ + + struct device_node *nvmem_np; + int index; + + index = of_property_match_string(np, "nvmem-names", id); + + nvmem_np = of_parse_phandle(np, "nvmem", index); + if (!nvmem_np) + return ERR_PTR(-EINVAL); + + return __nvmem_device_get(nvmem_np, NULL, NULL); +} +EXPORT_SYMBOL_GPL(of_nvmem_device_get); +#endif + +/** + * nvmem_device_get() - Get nvmem device from a given id + * + * @dev : Device that uses the nvmem device + * @id: nvmem name from nvmem-names property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device + * on success. + */ +struct nvmem_device *nvmem_device_get(struct device *dev, const char *dev_name) +{ + if (dev->of_node) { /* try dt first */ + struct nvmem_device *nvmem; + + nvmem = of_nvmem_device_get(dev->of_node, dev_name); + + if (!IS_ERR(nvmem) || PTR_ERR(nvmem) == -EPROBE_DEFER) + return nvmem; + + } + + return nvmem_find(dev_name); +} +EXPORT_SYMBOL_GPL(nvmem_device_get); + +static int devm_nvmem_device_match(struct device *dev, void *res, void *data) +{ + struct nvmem_device **nvmem = res; + + if (WARN_ON(!nvmem || !*nvmem)) + return 0; + + return *nvmem == data; +} + +static void devm_nvmem_device_release(struct device *dev, void *res) +{ + nvmem_device_put(*(struct nvmem_device **)res); +} + +/** + * devm_nvmem_device_put() - put alredy got nvmem device + * + * @nvmem: pointer to nvmem device allocated by devm_nvmem_cell_get(), + * that needs to be released. + */ +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem) +{ + int ret; + + ret = devres_release(dev, devm_nvmem_device_release, + devm_nvmem_device_match, nvmem); + + WARN_ON(ret); +} +EXPORT_SYMBOL_GPL(devm_nvmem_device_put); + +/** + * nvmem_device_put() - put alredy got nvmem device + * + * @nvmem: pointer to nvmem device that needs to be released. + */ +void nvmem_device_put(struct nvmem_device *nvmem) +{ + __nvmem_device_put(nvmem); +} +EXPORT_SYMBOL_GPL(nvmem_device_put); + +/** + * devm_nvmem_device_get() - Get nvmem cell of device form a given id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem name in nvmems property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_cell + * on success. The nvmem_cell will be freed by the automatically once the + * device is freed. + */ +struct nvmem_device *devm_nvmem_device_get(struct device *dev, const char *id) +{ + struct nvmem_device **ptr, *nvmem; + + ptr = devres_alloc(devm_nvmem_device_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + nvmem = nvmem_device_get(dev, id); + if (!IS_ERR(nvmem)) { + *ptr = nvmem; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return nvmem; +} +EXPORT_SYMBOL_GPL(devm_nvmem_device_get); + +static struct nvmem_cell *nvmem_cell_get_from_list(const char *cell_id) +{ + struct nvmem_cell *cell = NULL; + struct nvmem_device *nvmem; + + nvmem = __nvmem_device_get(NULL, &cell, cell_id); + if (IS_ERR(nvmem)) + return ERR_CAST(nvmem); + + return cell; +} + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +/** + * of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem cell name from nvmem-cell-names property. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * nvmem_cell_put(). + */ +struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name) +{ + struct device_node *cell_np, *nvmem_np; + struct nvmem_cell *cell; + struct nvmem_device *nvmem; + const __be32 *addr; + int rval, len, index; + + index = of_property_match_string(np, "nvmem-cell-names", name); + + cell_np = of_parse_phandle(np, "nvmem-cells", index); + if (!cell_np) + return ERR_PTR(-EINVAL); + + nvmem_np = of_get_next_parent(cell_np); + if (!nvmem_np) + return ERR_PTR(-EINVAL); + + nvmem = __nvmem_device_get(nvmem_np, NULL, NULL); + if (IS_ERR(nvmem)) + return ERR_CAST(nvmem); + + addr = of_get_property(cell_np, "reg", &len); + if (!addr || (len < 2 * sizeof(u32))) { + dev_err(&nvmem->dev, "nvmem: invalid reg on %s\n", + cell_np->full_name); + rval = -EINVAL; + goto err_mem; + } + + cell = kzalloc(sizeof(*cell), GFP_KERNEL); + if (!cell) { + rval = -ENOMEM; + goto err_mem; + } + + cell->nvmem = nvmem; + cell->offset = be32_to_cpup(addr++); + cell->bytes = be32_to_cpup(addr); + cell->name = cell_np->name; + + addr = of_get_property(cell_np, "bits", &len); + if (addr && len == (2 * sizeof(u32))) { + cell->bit_offset = be32_to_cpup(addr++); + cell->nbits = be32_to_cpup(addr); + } + + if (cell->nbits) + cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset, + BITS_PER_BYTE); + + if (!IS_ALIGNED(cell->offset, nvmem->stride)) { + dev_err(&nvmem->dev, + "cell %s unaligned to nvmem stride %d\n", + cell->name, nvmem->stride); + rval = -EINVAL; + goto err_sanity; + } + + nvmem_cell_add(cell); + + return cell; + +err_sanity: + kfree(cell); + +err_mem: + __nvmem_device_put(nvmem); + + return ERR_PTR(rval); +} +EXPORT_SYMBOL_GPL(of_nvmem_cell_get); +#endif + +/** + * nvmem_cell_get() - Get nvmem cell of device form a given cell name + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem cell name to get. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * nvmem_cell_put(). + */ +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *cell_id) +{ + struct nvmem_cell *cell; + + if (dev->of_node) { /* try dt first */ + cell = of_nvmem_cell_get(dev->of_node, cell_id); + if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER) + return cell; + } + + return nvmem_cell_get_from_list(cell_id); +} +EXPORT_SYMBOL_GPL(nvmem_cell_get); + +static void devm_nvmem_cell_release(struct device *dev, void *res) +{ + nvmem_cell_put(*(struct nvmem_cell **)res); +} + +/** + * devm_nvmem_cell_get() - Get nvmem cell of device form a given id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem id in nvmem-names property. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * automatically once the device is freed. + */ +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *id) +{ + struct nvmem_cell **ptr, *cell; + + ptr = devres_alloc(devm_nvmem_cell_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + cell = nvmem_cell_get(dev, id); + if (!IS_ERR(cell)) { + *ptr = cell; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return cell; +} +EXPORT_SYMBOL_GPL(devm_nvmem_cell_get); + +static int devm_nvmem_cell_match(struct device *dev, void *res, void *data) +{ + struct nvmem_cell **c = res; + + if (WARN_ON(!c || !*c)) + return 0; + + return *c == data; +} + +/** + * devm_nvmem_cell_put() - Release previously allocated nvmem cell + * from devm_nvmem_cell_get. + * + * @cell: Previously allocated nvmem cell by devm_nvmem_cell_get() + */ +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell) +{ + int ret; + + ret = devres_release(dev, devm_nvmem_cell_release, + devm_nvmem_cell_match, cell); + + WARN_ON(ret); +} +EXPORT_SYMBOL(devm_nvmem_cell_put); + +/** + * nvmem_cell_put() - Release previously allocated nvmem cell. + * + * @cell: Previously allocated nvmem cell by nvmem_cell_get() + */ +void nvmem_cell_put(struct nvmem_cell *cell) +{ + struct nvmem_device *nvmem = cell->nvmem; + + __nvmem_device_put(nvmem); + nvmem_cell_drop(cell); +} +EXPORT_SYMBOL_GPL(nvmem_cell_put); + +static inline void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, + void *buf) +{ + u8 *p, *b; + int i, bit_offset = cell->bit_offset; + + p = b = buf; + if (bit_offset) { + /* First shift */ + *b++ >>= bit_offset; + + /* setup rest of the bytes if any */ + for (i = 1; i < cell->bytes; i++) { + /* Get bits from next byte and shift them towards msb */ + *p |= *b << (BITS_PER_BYTE - bit_offset); + + p = b; + *b++ >>= bit_offset; + } + + /* result fits in less bytes */ + if (cell->bytes != DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE)) + *p-- = 0; + } + /* clear msb bits if any leftover in the last byte */ + *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); +} + +static int __nvmem_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell *cell, + void *buf, size_t *len) +{ + int rc; + + rc = regmap_raw_read(nvmem->regmap, cell->offset, buf, cell->bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + /* shift bits in-place */ + if (cell->bit_offset || cell->bit_offset) + nvmem_shift_read_buffer_in_place(cell, buf); + + *len = cell->bytes; + + return 0; +} + +/** + * nvmem_cell_read() - Read a given nvmem cell + * + * @cell: nvmem cell to be read. + * @len: pointer to length of cell which will be populated on successful read. + * + * Return: ERR_PTR() on error or a valid pointer to a char * buffer on success. + * The buffer should be freed by the consumer with a kfree(). + */ +void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len) +{ + struct nvmem_device *nvmem = cell->nvmem; + u8 *buf; + int rc; + + if (!nvmem || !nvmem->regmap) + return ERR_PTR(-EINVAL); + + buf = kzalloc(cell->bytes, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + rc = __nvmem_cell_read(nvmem, cell, buf, len); + if (IS_ERR_VALUE(rc)) { + kfree(buf); + return ERR_PTR(rc); + } + + return buf; +} +EXPORT_SYMBOL_GPL(nvmem_cell_read); + +static inline void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell, + u8 *_buf, int len) +{ + struct nvmem_device *nvmem = cell->nvmem; + int i, rc, nbits, bit_offset = cell->bit_offset; + u8 v, *p, *buf, *b, pbyte, pbits; + + nbits = cell->nbits; + buf = kzalloc(cell->bytes, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + memcpy(buf, _buf, len); + p = b = buf; + + if (bit_offset) { + pbyte = *b; + *b <<= bit_offset; + + /* setup the first byte with lsb bits from nvmem */ + rc = regmap_raw_read(nvmem->regmap, cell->offset, &v, 1); + *b++ |= GENMASK(bit_offset - 1, 0) & v; + + /* setup rest of the byte if any */ + for (i = 1; i < cell->bytes; i++) { + /* Get last byte bits and shift them towards lsb */ + pbits = pbyte >> (BITS_PER_BYTE - 1 - bit_offset); + pbyte = *b; + p = b; + *b <<= bit_offset; + *b++ |= pbits; + } + } + + /* if it's not end on byte boundary */ + if ((nbits + bit_offset) % BITS_PER_BYTE) { + /* setup the last byte with msb bits from nvmem */ + rc = regmap_raw_read(nvmem->regmap, + cell->offset + cell->bytes - 1, &v, 1); + *p |= GENMASK(7, (nbits + bit_offset) % BITS_PER_BYTE) & v; + + } + + return buf; +} + +/** + * nvmem_cell_write() - Write to a given nvmem cell + * + * @cell: nvmem cell to be written. + * @buf: Buffer to be written. + * @len: length of buffer to be written to nvmem cell. + * + * Return: length of bytes written or negative on failure. + */ +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len) +{ + struct nvmem_device *nvmem = cell->nvmem; + int rc; + + if (!nvmem || !nvmem->regmap || nvmem->read_only || + (cell->bit_offset == 0 && len != cell->bytes)) + return -EINVAL; + + if (cell->bit_offset || cell->nbits) { + buf = nvmem_cell_prepare_write_buffer(cell, buf, len); + if (IS_ERR(buf)) + return PTR_ERR(buf); + } + + rc = regmap_raw_write(nvmem->regmap, cell->offset, buf, cell->bytes); + + /* free the tmp buffer */ + if (cell->bit_offset) + kfree(buf); + + if (IS_ERR_VALUE(rc)) + return rc; + + return len; +} +EXPORT_SYMBOL_GPL(nvmem_cell_write); + +/** + * nvmem_device_cell_read() - Read a given nvmem device and cell + * + * @nvmem: nvmem device to read from. + * @info: nvmem cell info to be read. + * @buf: buffer pointer which will be populated on successful read. + * + * Return: length of successful bytes read on success and negative + * error code on error. + */ +ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf) +{ + struct nvmem_cell cell; + int rc; + ssize_t len; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = nvmem_cell_info_to_nvmem_cell(nvmem, info, &cell); + if (IS_ERR_VALUE(rc)) + return rc; + + rc = __nvmem_cell_read(nvmem, &cell, buf, &len); + if (IS_ERR_VALUE(rc)) + return rc; + + return len; +} +EXPORT_SYMBOL_GPL(nvmem_device_cell_read); + +/** + * nvmem_device_cell_write() - Write cell to a given nvmem device + * + * @nvmem: nvmem device to be written to. + * @info: nvmem cell info to be written + * @buf: buffer to be written to cell. + * + * Return: length of bytes written or negative error code on failure. + * */ +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf) +{ + struct nvmem_cell cell; + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = nvmem_cell_info_to_nvmem_cell(nvmem, info, &cell); + if (IS_ERR_VALUE(rc)) + return rc; + + return nvmem_cell_write(&cell, buf, cell.bytes); +} +EXPORT_SYMBOL_GPL(nvmem_device_cell_write); + +/** + * nvmem_device_read() - Read from a given nvmem device + * + * @nvmem: nvmem device to read from. + * @offset: offset in nvmem device. + * @bytes: number of bytes to read. + * @buf: buffer pointer which will be populated on successful read. + * + * Return: length of successful bytes read on success and negative + * error code on error. + */ +int nvmem_device_read(struct nvmem_device *nvmem, + unsigned int offset, + size_t bytes, void *buf) +{ + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = regmap_raw_read(nvmem->regmap, offset, buf, bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + return bytes; +} +EXPORT_SYMBOL_GPL(nvmem_device_read); + +/** + * nvmem_device_write() - Write cell to a given nvmem device + * + * @nvmem: nvmem device to be written to. + * @offset: offset in nvmem device. + * @bytes: number of bytes to write. + * @buf: buffer to be written. + * + * Return: length of bytes written or negative error code on failure. + * */ +int nvmem_device_write(struct nvmem_device *nvmem, + unsigned int offset, + size_t bytes, void *buf) +{ + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = regmap_raw_write(nvmem->regmap, offset, buf, bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + + return bytes; +} +EXPORT_SYMBOL_GPL(nvmem_device_write); + +static int __init nvmem_init(void) +{ + return bus_register(&nvmem_bus_type); +} + +static void __exit nvmem_exit(void) +{ + bus_unregister(&nvmem_bus_type); +} + +subsys_initcall(nvmem_init); +module_exit(nvmem_exit); + +MODULE_AUTHOR("Srinivas Kandagatla + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +static struct regmap_config qfprom_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, +}; + +static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, +}; + +static int qfprom_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static int qfprom_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct nvmem_device *nvmem; + struct regmap *regmap; + void __iomem *base; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + qfprom_regmap_config.max_register = resource_size(res) - 1; + + regmap = devm_regmap_init_mmio(dev, base, &qfprom_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + econfig.dev = dev; + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static const struct of_device_id qfprom_of_match[] = { + { .compatible = "qcom,qfprom",}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, qfprom_of_match); + +static struct platform_driver qfprom_driver = { + .probe = qfprom_probe, + .remove = qfprom_remove, + .driver = { + .name = "qcom,qfprom", + .of_match_table = qfprom_of_match, + }, +}; +module_platform_driver(qfprom_driver); +MODULE_AUTHOR("Srinivas Kandagatla "); +MODULE_DESCRIPTION("Qualcomm QFPROM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c new file mode 100644 index 0000000..14777dd --- /dev/null +++ b/drivers/nvmem/sunxi_sid.c @@ -0,0 +1,171 @@ +/* + * Allwinner sunXi SoCs Security ID support. + * + * Copyright (c) 2013 Oliver Schinagl + * Copyright (C) 2014 Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +static struct nvmem_config econfig = { + .name = "sunxi-sid", + .read_only = true, + .owner = THIS_MODULE, +}; + +struct sunxi_sid { + void __iomem *base; +}; + +/* We read the entire key, due to a 32 bit read alignment requirement. Since we + * want to return the requested byte, this results in somewhat slower code and + * uses 4 times more reads as needed but keeps code simpler. Since the SID is + * only very rarely probed, this is not really an issue. + */ +static u8 sunxi_sid_read_byte(const struct sunxi_sid *sid, + const unsigned int offset) +{ + u32 sid_key; + + sid_key = ioread32be(sid->base + round_down(offset, 4)); + sid_key >>= (offset % 4) * 8; + + return sid_key; /* Only return the last byte */ +} + +static int sunxi_sid_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct sunxi_sid *sid = context; + unsigned int offset = *(u32 *)reg; + u8 *buf = val; + + while (val_size) { + *buf++ = sunxi_sid_read_byte(sid, offset); + val_size--; + offset++; + } + + return 0; +} + +static int sunxi_sid_write(void *context, const void *data, size_t count) +{ + /* Unimplemented, dummy to keep regmap core happy */ + return 0; +} + +static struct regmap_bus sunxi_sid_bus = { + .read = sunxi_sid_read, + .write = sunxi_sid_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static bool sunxi_sid_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static struct regmap_config sunxi_sid_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, + .writeable_reg = sunxi_sid_writeable_reg, +}; + +static int sunxi_sid_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct nvmem_device *nvmem; + struct regmap *regmap; + struct sunxi_sid *sid; + int i, size; + char *randomness; + + sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL); + if (!sid) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sid->base = devm_ioremap_resource(dev, res); + if (IS_ERR(sid->base)) + return PTR_ERR(sid->base); + + size = resource_size(res) - 1; + sunxi_sid_regmap_config.max_register = size; + + regmap = devm_regmap_init(dev, &sunxi_sid_bus, sid, + &sunxi_sid_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + + econfig.dev = dev; + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + randomness = kzalloc(sizeof(u8) * size, GFP_KERNEL); + for (i = 0; i < size; i++) + randomness[i] = sunxi_sid_read_byte(sid, i); + + add_device_randomness(randomness, size); + kfree(randomness); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int sunxi_sid_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static const struct of_device_id sunxi_sid_of_match[] = { + { .compatible = "allwinner,sun4i-a10-sid" }, + { .compatible = "allwinner,sun7i-a20-sid" }, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); + +static struct platform_driver sunxi_sid_driver = { + .probe = sunxi_sid_probe, + .remove = sunxi_sid_remove, + .driver = { + .name = "eeprom-sunxi-sid", + .of_match_table = sunxi_sid_of_match, + }, +}; +module_platform_driver(sunxi_sid_driver); + +MODULE_AUTHOR("Oliver Schinagl "); +MODULE_DESCRIPTION("Allwinner sunxi security id driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 07bb3c8..40f2dde 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -97,4 +97,12 @@ config OF_OVERLAY While this option is selected automatically when needed, you can enable it manually to improve device tree unit test coverage. +config OF_CONFIGFS + bool "Device Tree Overlay ConfigFS interface" + select CONFIGFS_FS + select OF_OVERLAY + select OF_FLATTREE + help + Enable a simple user-space driven DT overlay interface. + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index fcacb18..b5df4a2 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -1,4 +1,5 @@ obj-y = base.o device.o platform.o +obj-$(CONFIG_OF_CONFIGFS) += configfs.o obj-$(CONFIG_OF_DYNAMIC) += dynamic.o obj-$(CONFIG_OF_FLATTREE) += fdt.o obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o diff --git a/drivers/of/base.c b/drivers/of/base.c index 5ed9724..91e93ba 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -192,6 +192,7 @@ int __of_attach_node_sysfs(struct device_node *np) void __init of_core_init(void) { struct device_node *np; + int ret; /* Create the kset, and register existing nodes */ mutex_lock(&of_mutex); @@ -208,6 +209,12 @@ void __init of_core_init(void) /* Symlink in /proc as required by userspace ABI */ if (of_root) proc_symlink("device-tree", NULL, "/sys/firmware/devicetree/base"); + + ret = of_overlay_init(); + if (ret != 0) + pr_warn("of_init: of_overlay_init failed!\n"); + + return 0; } static struct property *__of_find_property(const struct device_node *np, diff --git a/drivers/of/configfs.c b/drivers/of/configfs.c new file mode 100644 index 0000000..9fb1b35 --- /dev/null +++ b/drivers/of/configfs.c @@ -0,0 +1,333 @@ +/* + * Configfs entries for device-tree + * + * Copyright (C) 2013 - Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "of_private.h" + +struct cfs_overlay_item { + struct config_item item; + + char path[PATH_MAX]; + + const struct firmware *fw; + struct device_node *overlay; + int ov_id; + + void *dtbo; + int dtbo_size; +}; + +static int create_overlay(struct cfs_overlay_item *overlay, void *blob) +{ + int err; + + /* unflatten the tree */ + of_fdt_unflatten_tree(blob, &overlay->overlay); + if (overlay->overlay == NULL) { + pr_err("%s: failed to unflatten tree\n", __func__); + err = -EINVAL; + goto out_err; + } + pr_debug("%s: unflattened OK\n", __func__); + + /* mark it as detached */ + of_node_set_flag(overlay->overlay, OF_DETACHED); + + /* perform resolution */ + err = of_resolve_phandles(overlay->overlay); + if (err != 0) { + pr_err("%s: Failed to resolve tree\n", __func__); + goto out_err; + } + pr_debug("%s: resolved OK\n", __func__); + + err = of_overlay_create(overlay->overlay); + if (err < 0) { + pr_err("%s: Failed to create overlay (err=%d)\n", + __func__, err); + goto out_err; + } + overlay->ov_id = err; + +out_err: + return err; +} + +static inline struct cfs_overlay_item *to_cfs_overlay_item( + struct config_item *item) +{ + return item ? container_of(item, struct cfs_overlay_item, item) : NULL; +} + +CONFIGFS_ATTR_STRUCT(cfs_overlay_item); +#define CFS_OVERLAY_ITEM_ATTR(_name, _mode, _show, _store) \ +struct cfs_overlay_item_attribute cfs_overlay_item_attr_##_name = \ + __CONFIGFS_ATTR(_name, _mode, _show, _store) +#define CFS_OVERLAY_ITEM_ATTR_RO(_name, _show) \ +struct cfs_overlay_item_attribute cfs_overlay_item_attr_##_name = \ + __CONFIGFS_ATTR_RO(_name, _show) + +CONFIGFS_BIN_ATTR_STRUCT(cfs_overlay_item); +#define CFS_OVERLAY_ITEM_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) \ +struct cfs_overlay_item_bin_attribute cfs_overlay_item_bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) +#define CFS_OVERLAY_ITEM_BIN_ATTR_RO(_name, _read, _priv, _max) \ +struct cfs_overlay_item_bin_attribute cfs_overlay_item_bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR_RO(_name, _read, _priv, _max) + +static ssize_t cfs_overlay_item_path_show(struct cfs_overlay_item *overlay, + char *page) +{ + return sprintf(page, "%s\n", overlay->path); +} + +static ssize_t cfs_overlay_item_path_store(struct cfs_overlay_item *overlay, + const char *page, size_t count) +{ + const char *p = page; + char *s; + int err; + + /* if it's set do not allow changes */ + if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) + return -EPERM; + + /* copy to path buffer (and make sure it's always zero terminated */ + count = snprintf(overlay->path, sizeof(overlay->path) - 1, "%s", p); + overlay->path[sizeof(overlay->path) - 1] = '\0'; + + /* strip trailing newlines */ + s = overlay->path + strlen(overlay->path); + while (s > overlay->path && *--s == '\n') + *s = '\0'; + + pr_debug("%s: path is '%s'\n", __func__, overlay->path); + + err = request_firmware(&overlay->fw, overlay->path, NULL); + if (err != 0) + goto out_err; + + err = create_overlay(overlay, (void *)overlay->fw->data); + if (err < 0) + goto out_err; + + return count; + +out_err: + + release_firmware(overlay->fw); + overlay->fw = NULL; + + overlay->path[0] = '\0'; + return err; +} + +static ssize_t cfs_overlay_item_status_show(struct cfs_overlay_item *overlay, + char *page) +{ + return sprintf(page, "%s\n", + overlay->ov_id >= 0 ? "applied" : "unapplied"); +} + +CFS_OVERLAY_ITEM_ATTR(path, S_IRUGO | S_IWUSR, + cfs_overlay_item_path_show, cfs_overlay_item_path_store); +CFS_OVERLAY_ITEM_ATTR_RO(status, cfs_overlay_item_status_show); + +static struct configfs_attribute *cfs_overlay_attrs[] = { + &cfs_overlay_item_attr_path.attr, + &cfs_overlay_item_attr_status.attr, + NULL, +}; + +ssize_t cfs_overlay_item_dtbo_read(struct cfs_overlay_item *overlay, + void *buf, size_t max_count) +{ + pr_debug("%s: buf=%p max_count=%u\n", __func__, + buf, max_count); + + if (overlay->dtbo == NULL) + return 0; + + /* copy if buffer provided */ + if (buf != NULL) { + /* the buffer must be large enough */ + if (overlay->dtbo_size > max_count) + return -ENOSPC; + + memcpy(buf, overlay->dtbo, overlay->dtbo_size); + } + + return overlay->dtbo_size; +} + +ssize_t cfs_overlay_item_dtbo_write(struct cfs_overlay_item *overlay, + const void *buf, size_t count) +{ + int err; + + /* if it's set do not allow changes */ + if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) + return -EPERM; + + /* copy the contents */ + overlay->dtbo = kmemdup(buf, count, GFP_KERNEL); + if (overlay->dtbo == NULL) + return -ENOMEM; + + overlay->dtbo_size = count; + + err = create_overlay(overlay, overlay->dtbo); + if (err < 0) + goto out_err; + + return count; + +out_err: + kfree(overlay->dtbo); + overlay->dtbo = NULL; + overlay->dtbo_size = 0; + + return err; +} + +CFS_OVERLAY_ITEM_BIN_ATTR(dtbo, S_IRUGO | S_IWUSR, + cfs_overlay_item_dtbo_read, cfs_overlay_item_dtbo_write, + NULL, SZ_1M); + +static struct configfs_bin_attribute *cfs_overlay_bin_attrs[] = { + &cfs_overlay_item_bin_attr_dtbo.bin_attr, + NULL, +}; + +static void cfs_overlay_release(struct config_item *item) +{ + struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); + + if (overlay->ov_id >= 0) + of_overlay_destroy(overlay->ov_id); + if (overlay->fw) + release_firmware(overlay->fw); + /* kfree with NULL is safe */ + kfree(overlay->dtbo); + kfree(overlay); +} + +CONFIGFS_ATTR_OPS(cfs_overlay_item); +CONFIGFS_BIN_ATTR_OPS(cfs_overlay_item); +static struct configfs_item_operations cfs_overlay_item_ops = { + .release = cfs_overlay_release, + .show_attribute = cfs_overlay_item_attr_show, + .store_attribute = cfs_overlay_item_attr_store, + .read_bin_attribute = cfs_overlay_item_bin_attr_read, + .write_bin_attribute = cfs_overlay_item_bin_attr_write, +}; + +static struct config_item_type cfs_overlay_type = { + .ct_item_ops = &cfs_overlay_item_ops, + .ct_attrs = cfs_overlay_attrs, + .ct_bin_attrs = cfs_overlay_bin_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct config_item *cfs_overlay_group_make_item( + struct config_group *group, const char *name) +{ + struct cfs_overlay_item *overlay; + + overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); + if (!overlay) + return ERR_PTR(-ENOMEM); + overlay->ov_id = -1; + + config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); + return &overlay->item; +} + +static void cfs_overlay_group_drop_item(struct config_group *group, + struct config_item *item) +{ + struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); + + config_item_put(&overlay->item); +} + +static struct configfs_group_operations overlays_ops = { + .make_item = cfs_overlay_group_make_item, + .drop_item = cfs_overlay_group_drop_item, +}; + +static struct config_item_type overlays_type = { + .ct_group_ops = &overlays_ops, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_group_operations of_cfs_ops = { + /* empty - we don't allow anything to be created */ +}; + +static struct config_item_type of_cfs_type = { + .ct_group_ops = &of_cfs_ops, + .ct_owner = THIS_MODULE, +}; + +struct config_group of_cfs_overlay_group; + +struct config_group *of_cfs_def_groups[] = { + &of_cfs_overlay_group, + NULL +}; + +static struct configfs_subsystem of_cfs_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "device-tree", + .ci_type = &of_cfs_type, + }, + .default_groups = of_cfs_def_groups, + }, + .su_mutex = __MUTEX_INITIALIZER(of_cfs_subsys.su_mutex), +}; + +static int __init of_cfs_init(void) +{ + int ret; + + pr_info("%s\n", __func__); + + config_group_init(&of_cfs_subsys.su_group); + config_group_init_type_name(&of_cfs_overlay_group, "overlays", + &overlays_type); + + ret = configfs_register_subsystem(&of_cfs_subsys); + if (ret != 0) { + pr_err("%s: failed to register subsys\n", __func__); + goto out; + } + pr_info("%s: OK\n", __func__); +out: + return ret; +} +late_initcall(of_cfs_init); diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index 53826b8..afa8e31 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -394,8 +394,9 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags) } /** - * __of_node_dup() - Duplicate or create an empty device node dynamically. - * @fmt: Format string (plus vargs) for new full name of the device node + * __of_node_dupv() - Duplicate or create an empty device node dynamically. + * @fmt: Format string for new full name of the device node + * @vargs: va_list containing the arugments for the node full name * * Create an device tree node, either by duplicating an empty node or by allocating * an empty one suitable for further modification. The node data are @@ -403,17 +404,15 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags) * OF_DETACHED bits set. Returns the newly allocated node or NULL on out of * memory error. */ -struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, ...) +struct device_node *__of_node_dupv(const struct device_node *np, + const char *fmt, va_list vargs) { - va_list vargs; struct device_node *node; node = kzalloc(sizeof(*node), GFP_KERNEL); if (!node) return NULL; - va_start(vargs, fmt); node->full_name = kvasprintf(GFP_KERNEL, fmt, vargs); - va_end(vargs); if (!node->full_name) { kfree(node); return NULL; @@ -445,6 +444,24 @@ struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, return NULL; } +/** + * __of_node_dup() - Duplicate or create an empty device node dynamically. + * @fmt: Format string (plus vargs) for new full name of the device node + * + * See: __of_node_dupv() + */ +struct device_node *__of_node_dup(const struct device_node *np, + const char *fmt, ...) +{ + va_list vargs; + struct device_node *node; + + va_start(vargs, fmt); + node = __of_node_dupv(np, fmt, vargs); + va_end(vargs); + return node; +} + static void __of_changeset_entry_destroy(struct of_changeset_entry *ce) { of_node_put(ce->np); @@ -779,3 +796,254 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action, list_add_tail(&ce->node, &ocs->entries); return 0; } + +/* changeset helpers */ + +/** + * of_changeset_create_device_node - Create an empty device node + * + * @ocs: changeset pointer + * @parent: parent device node + * @fmt: format string for the node's full_name + * @args: argument list for the format string + * + * Create an empty device node, marking it as detached and allocated. + * + * Returns a device node on success, an error encoded pointer otherwise + */ +struct device_node *of_changeset_create_device_nodev( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, va_list vargs) +{ + struct device_node *node; + + node = __of_node_dupv(NULL, fmt, vargs); + if (!node) + return ERR_PTR(-ENOMEM); + + node->parent = parent; + return node; +} + +/** + * of_changeset_create_device_node - Create an empty device node + * + * @ocs: changeset pointer + * @parent: parent device node + * @fmt: Format string for the node's full_name + * ... Arguments + * + * Create an empty device node, marking it as detached and allocated. + * + * Returns a device node on success, an error encoded pointer otherwise + */ +struct device_node *of_changeset_create_device_node( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, ...) +{ + va_list vargs; + struct device_node *node; + + va_start(vargs, fmt); + node = of_changeset_create_device_nodev(ocs, parent, fmt, vargs); + va_end(vargs); + return node; +} + +/** + * of_changeset_add_property_copy - Create a new property copying name & value + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @value: pointer to the value data + * @length: length of the value in bytes + * + * Adds a property to the changeset by making copies of the name & value + * entries. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_copy(struct of_changeset *ocs, + struct device_node *np, const char *name, const void *value, + int length) +{ + struct property *prop; + char *new_name; + void *new_value; + int ret; + + ret = -ENOMEM; + + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + if (!prop) + goto out_no_prop; + + new_name = kstrdup(name, GFP_KERNEL); + if (!new_name) + goto out_no_name; + + /* + * NOTE: There is no check for zero length value. + * In case of a boolean property, this will allocate a value + * of zero bytes. We do this to work around the use + * of of_get_property() calls on boolean values. + */ + new_value = kmemdup(value, length, GFP_KERNEL); + if (!new_value) + goto out_no_value; + + of_property_set_flag(prop, OF_DYNAMIC); + + prop->name = new_name; + prop->value = new_value; + prop->length = length; + + ret = of_changeset_add_property(ocs, np, prop); + if (ret != 0) + goto out_no_add; + + return 0; + +out_no_add: + kfree(prop->value); +out_no_value: + kfree(prop->name); +out_no_name: + kfree(prop); +out_no_prop: + return ret; +} + +/** + * of_changeset_add_property_string - Create a new string property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @str: string property + * + * Adds a string property to the changeset by making copies of the name + * and the string value. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_string(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *str) +{ + return of_changeset_add_property_copy(ocs, np, name, str, + strlen(str) + 1); +} + +/** + * of_changeset_add_property_stringf - Create a new formatted string property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @fmt: format of string property + * ... arguments of the format string + * + * Adds a string property to the changeset by making copies of the name + * and the formatted value. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_stringf(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *fmt, ...) +{ + va_list vargs; + char *str; + int ret; + + va_start(vargs, fmt); + str = kvasprintf(GFP_KERNEL, fmt, vargs); + va_end(vargs); + + ret = of_changeset_add_property_string(ocs, np, name, str); + + kfree(str); + return ret; +} + +/** + * of_changeset_add_property_string_list - Create a new string list property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @strs: pointer to the string list + * @count: string count + * + * Adds a string list property to the changeset. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_string_list(struct of_changeset *ocs, + struct device_node *np, const char *name, const char **strs, + int count) +{ + int total, length, i, ret; + char *value, *s; + + total = 0; + for (i = 0; i < count; i++) { + length = strlen(strs[i]); + total += length + 1; + } + + value = kmalloc(total, GFP_KERNEL); + if (!value) + return -ENOMEM; + + for (i = 0, s = value; i < count; i++) { + length = strlen(strs[i]); + memcpy(s, strs[i], length + 1); + s += length + 1; + } + + ret = of_changeset_add_property_copy(ocs, np, name, value, total); + + kfree(value); + + return ret; +} + +/** + * of_changeset_add_property_u32 - Create a new u32 property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @val: value in host endian format + * + * Adds a u32 property to the changeset. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_u32(struct of_changeset *ocs, + struct device_node *np, const char *name, u32 val) +{ + /* in place */ + val = cpu_to_be32(val); + return of_changeset_add_property_copy(ocs, np, name, &val, sizeof(val)); +} + +/** + * of_changeset_add_property_bool - Create a new u32 property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * + * Adds a bool property to the changeset. Note that there is + * no option to set the value to false, since the property + * existing sets it to true. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_bool(struct of_changeset *ocs, + struct device_node *np, const char *name) +{ + return of_changeset_add_property_copy(ocs, np, name, "", 0); +} diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 8e882e7..120eb44 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -90,4 +90,13 @@ extern void __of_detach_node_sysfs(struct device_node *np); #define for_each_transaction_entry_reverse(_oft, _te) \ list_for_each_entry_reverse(_te, &(_oft)->te_list, node) +#if defined(CONFIG_OF_OVERLAY) +extern int of_overlay_init(void); +#else +static inline int of_overlay_init(void) +{ + return 0; +} +#endif + #endif /* _LINUX_OF_PRIVATE_H */ diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index dee9270..f9b55d1 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include "of_private.h" @@ -51,10 +53,17 @@ struct of_overlay { int count; struct of_overlay_info *ovinfo_tab; struct of_changeset cset; + struct kobject kobj; + char *indirect_id; + struct device_node *target_root; }; +/* master enable switch; once set to 0 can't be re-enabled */ +static atomic_t ov_enable = ATOMIC_INIT(1); + static int of_overlay_apply_one(struct of_overlay *ov, struct device_node *target, const struct device_node *overlay); +static int overlay_removal_is_ok(struct of_overlay *ov); static int of_overlay_apply_single_property(struct of_overlay *ov, struct device_node *target, struct property *prop) @@ -184,33 +193,139 @@ static int of_overlay_apply(struct of_overlay *ov) return 0; } -/* - * Find the target node using a number of different strategies - * in order of preference - * - * "target" property containing the phandle of the target - * "target-path" property containing the path of the target - */ -static struct device_node *find_target_node(struct device_node *info_node) +static struct device_node *find_target_node_direct(struct of_overlay *ov, + struct device_node *info_node) { + struct device_node *target = NULL, *np; const char *path; + char *newpath; u32 val; int ret; /* first try to go by using the target as a phandle */ ret = of_property_read_u32(info_node, "target", &val); - if (ret == 0) - return of_find_node_by_phandle(val); + if (ret == 0) { + target = of_find_node_by_phandle(val); + if (!target) { + pr_err("%s: Could not find target phandle 0x%x\n", + __func__, val); + return NULL; + } + goto check_root; + } - /* now try to locate by path */ + /* failed, try to locate by path */ ret = of_property_read_string(info_node, "target-path", &path); - if (ret == 0) - return of_find_node_by_path(path); + if (ret == 0) { + + if (!ov->target_root) { + target = of_find_node_by_path(path); + if (!target) + pr_err("%s: Could not find target path \"%s\"\n", + __func__, path); + return target; + } - pr_err("%s: Failed to find target for node %p (%s)\n", __func__, - info_node, info_node->name); + /* remove preceding '/' from path; relative path */ + if (*path == '/') { + while (*path == '/') + path++; + + newpath = kasprintf(GFP_KERNEL, "%s%s%s", + of_node_full_name(ov->target_root), + *path ? "/" : "", path); + if (!newpath) { + pr_err("%s: Could not allocate \"%s%s%s\"\n", + __func__, + of_node_full_name(ov->target_root), + *path ? "/" : "", path); + return NULL; + } + target = of_find_node_by_path(newpath); + kfree(newpath); + + return target; + + } + /* target is an alias, need to check */ + target = of_find_node_by_path(path); + if (!target) { + pr_err("%s: Could not find alias \"%s\"\n", + __func__, path); + return NULL; + } + goto check_root; + } return NULL; + +check_root: + if (!ov->target_root) + return target; + + /* got a target, but we have to check it's under target root */ + for (np = target; np; np = np->parent) { + if (np == ov->target_root) + return target; + } + pr_err("%s: target \"%s\" not under target_root \"%s\"\n", + __func__, of_node_full_name(target), + of_node_full_name(ov->target_root)); + /* target is not under target_root */ + of_node_put(target); + return NULL; +} + +/* + * Find the target node using a number of different strategies + * in order of preference. Respects the indirect id if available. + * + * "target" property containing the phandle of the target + * "target-path" property containing the path of the target + */ +static struct device_node *find_target_node(struct of_overlay *ov, + struct device_node *info_node) +{ + struct device_node *target; + struct device_node *target_indirect; + struct device_node *indirect; + + /* try direct target */ + target = find_target_node_direct(ov, info_node); + if (target) + return target; + + /* try indirect if there */ + if (!ov->indirect_id) + return NULL; + + target_indirect = of_get_child_by_name(info_node, "target-indirect"); + if (!target_indirect) { + pr_err("%s: Failed to find target-indirect node at %s\n", + __func__, + of_node_full_name(info_node)); + return NULL; + } + + indirect = of_get_child_by_name(target_indirect, ov->indirect_id); + of_node_put(target_indirect); + if (!indirect) { + pr_err("%s: Failed to find indirect child node \"%s\" at %s\n", + __func__, ov->indirect_id, + of_node_full_name(info_node)); + return NULL; + } + + target = find_target_node_direct(ov, indirect); + + if (!target) { + pr_err("%s: Failed to find target for \"%s\" at %s\n", + __func__, ov->indirect_id, + of_node_full_name(indirect)); + } + of_node_put(indirect); + + return target; } /** @@ -234,7 +349,7 @@ static int of_fill_overlay_info(struct of_overlay *ov, if (ovinfo->overlay == NULL) goto err_fail; - ovinfo->target = find_target_node(info_node); + ovinfo->target = find_target_node(ov, info_node); if (ovinfo->target == NULL) goto err_fail; @@ -325,31 +440,140 @@ static int of_free_overlay_info(struct of_overlay *ov) static LIST_HEAD(ov_list); static DEFINE_IDR(ov_idr); -/** - * of_overlay_create() - Create and apply an overlay - * @tree: Device node containing all the overlays - * - * Creates and applies an overlay while also keeping track - * of the overlay in a list. This list can be used to prevent - * illegal overlay removals. - * - * Returns the id of the created overlay, or an negative error number - */ -int of_overlay_create(struct device_node *tree) +static inline struct of_overlay *kobj_to_overlay(struct kobject *kobj) +{ + return container_of(kobj, struct of_overlay, kobj); +} + +void of_overlay_release(struct kobject *kobj) +{ + struct of_overlay *ov = kobj_to_overlay(kobj); + + of_node_put(ov->target_root); + kfree(ov->indirect_id); + kfree(ov); +} + +static ssize_t enable_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&ov_enable)); +} + +static ssize_t enable_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, size_t count) +{ + int ret; + bool new_enable; + + ret = strtobool(buf, &new_enable); + if (ret != 0) + return ret; + /* if we've disabled it, no going back */ + if (atomic_read(&ov_enable) == 0) + return -EPERM; + atomic_set(&ov_enable, (int)new_enable); + return count; +} + +static struct kobj_attribute enable_attr = __ATTR_RW(enable); + +static const struct attribute *overlay_global_attrs[] = { + &enable_attr.attr, + NULL +}; + +static ssize_t can_remove_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + struct of_overlay *ov = kobj_to_overlay(kobj); + + return snprintf(buf, PAGE_SIZE, "%d\n", overlay_removal_is_ok(ov)); +} + +static ssize_t targets_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + struct of_overlay *ov = kobj_to_overlay(kobj); + struct of_overlay_info *ovinfo; + char *s, *e; + ssize_t ret; + int i, len; + + s = buf; + e = buf + PAGE_SIZE; + + mutex_lock(&of_mutex); + + /* targets */ + for (i = 0; i < ov->count; i++) { + ovinfo = &ov->ovinfo_tab[i]; + + len = snprintf(s, e - s, "%s\n", + of_node_full_name(ovinfo->target)); + if (len == 0) { + ret = -ENOSPC; + goto err; + } + s += len; + } + + /* the buffer is zero terminated */ + ret = s - buf; +err: + mutex_unlock(&of_mutex); + return ret; +} + +static struct kobj_attribute can_remove_attr = __ATTR_RO(can_remove); +static struct kobj_attribute targets_attr = __ATTR_RO(targets); + +static struct attribute *overlay_attrs[] = { + &can_remove_attr.attr, + &targets_attr.attr, + NULL +}; + +static struct kobj_type of_overlay_ktype = { + .release = of_overlay_release, + .sysfs_ops = &kobj_sysfs_ops, /* default kobj sysfs ops */ + .default_attrs = overlay_attrs, +}; + +static struct kset *ov_kset; + +static int __of_overlay_create(struct device_node *tree, + const char *indirect_id, struct device_node *target_root) { struct of_overlay *ov; int err, id; + /* administratively disabled */ + if (!atomic_read(&ov_enable)) + return -EPERM; + /* allocate the overlay structure */ ov = kzalloc(sizeof(*ov), GFP_KERNEL); if (ov == NULL) return -ENOMEM; ov->id = -1; + if (indirect_id) { + ov->indirect_id = kstrdup(indirect_id, GFP_KERNEL); + if (!ov->indirect_id) { + err = -ENOMEM; + goto err_no_mem; + } + } + ov->target_root = of_node_get(target_root); + INIT_LIST_HEAD(&ov->node); of_changeset_init(&ov->cset); + /* initialize kobject */ + kobject_init(&ov->kobj, &of_overlay_ktype); + mutex_lock(&of_mutex); id = idr_alloc(&ov_idr, ov, 0, 0, GFP_KERNEL); @@ -385,6 +609,14 @@ int of_overlay_create(struct device_node *tree) goto err_revert_overlay; } + ov->kobj.kset = ov_kset; + err = kobject_add(&ov->kobj, NULL, "%d", id); + if (err != 0) { + pr_err("%s: kobject_add() failed for tree@%s\n", + __func__, tree->full_name); + goto err_cancel_overlay; + } + /* add to the tail of the overlay list */ list_add_tail(&ov->node, &ov_list); @@ -392,6 +624,8 @@ int of_overlay_create(struct device_node *tree) return id; +err_cancel_overlay: + of_changeset_revert(&ov->cset); err_revert_overlay: err_abort_trans: of_free_overlay_info(ov); @@ -399,13 +633,68 @@ err_free_idr: idr_remove(&ov_idr, ov->id); err_destroy_trans: of_changeset_destroy(&ov->cset); +err_no_mem: + of_node_put(ov->target_root); + kfree(ov->indirect_id); kfree(ov); mutex_unlock(&of_mutex); return err; } + +/** + * of_overlay_create() - Create and apply an overlay + * @tree: Device node containing all the overlays + * + * Creates and applies an overlay while also keeping track + * of the overlay in a list. This list can be used to prevent + * illegal overlay removals. + * + * Returns the id of the created overlay, or an negative error number + */ +int of_overlay_create(struct device_node *tree) +{ + return __of_overlay_create(tree, NULL, NULL); +} EXPORT_SYMBOL_GPL(of_overlay_create); +/** + * of_overlay_create_indirect() - Create and apply an overlay + * @tree: Device node containing all the overlays + * @id: Indirect property phandle + * + * Creates and applies an overlay while also keeping track + * of the overlay in a list. This list can be used to prevent + * illegal overlay removals. + * + * Returns the id of the created overlay, or an negative error number + */ +int of_overlay_create_indirect(struct device_node *tree, const char *id) +{ + return __of_overlay_create(tree, id, NULL); +} +EXPORT_SYMBOL_GPL(of_overlay_create_indirect); + +/** + * of_overlay_create_target_root() - Create and apply an overlay + * under which will be limited to target_root + * @tree: Device node containing all the overlays + * @target_root: Target root for the overlay. + * + * Creates and applies an overlay while also keeping track + * of the overlay in a list. This list can be used to prevent + * illegal overlay removals. The overlay is only allowed to + * target nodes under the target_root node. + * + * Returns the id of the created overlay, or an negative error number + */ +int of_overlay_create_target_root(struct device_node *tree, + struct device_node *target_root) +{ + return __of_overlay_create(tree, NULL, target_root); +} +EXPORT_SYMBOL_GPL(of_overlay_create_target_root); + /* check whether the given node, lies under the given tree */ static int overlay_subtree_check(struct device_node *tree, struct device_node *dn) @@ -512,7 +801,9 @@ int of_overlay_destroy(int id) of_free_overlay_info(ov); idr_remove(&ov_idr, id); of_changeset_destroy(&ov->cset); - kfree(ov); + + kobject_del(&ov->kobj); + kobject_put(&ov->kobj); err = 0; @@ -542,7 +833,8 @@ int of_overlay_destroy_all(void) of_changeset_revert(&ov->cset); of_free_overlay_info(ov); idr_remove(&ov_idr, ov->id); - kfree(ov); + kobject_del(&ov->kobj); + kobject_put(&ov->kobj); } mutex_unlock(&of_mutex); @@ -550,3 +842,18 @@ int of_overlay_destroy_all(void) return 0; } EXPORT_SYMBOL_GPL(of_overlay_destroy_all); + +/* called from of_init() */ +int of_overlay_init(void) +{ + int rc; + + ov_kset = kset_create_and_add("overlays", NULL, &of_kset->kobj); + if (!ov_kset) + return -ENOMEM; + + rc = sysfs_create_files(&ov_kset->kobj, overlay_global_attrs); + WARN(rc, "%s: error adding global attributes\n", __func__); + + return rc; +} diff --git a/drivers/of/unittest-data/testcases.dts b/drivers/of/unittest-data/testcases.dts index 12f7c3d..8052b96 100644 --- a/drivers/of/unittest-data/testcases.dts +++ b/drivers/of/unittest-data/testcases.dts @@ -75,5 +75,19 @@ target = <0x00000000>; }; }; + overlay16 { + fragment@0 { + target-indirect { + unittest16 { + target = <0x00000000>; + }; + }; + }; + }; + overlay18 { + fragment@0 { + target = <0x00000000>; + }; + }; }; }; }; diff --git a/drivers/of/unittest-data/tests-overlay.dtsi b/drivers/of/unittest-data/tests-overlay.dtsi index 02ba56c..e10ff5a 100644 --- a/drivers/of/unittest-data/tests-overlay.dtsi +++ b/drivers/of/unittest-data/tests-overlay.dtsi @@ -110,6 +110,30 @@ }; }; }; + + unittest16: test-unittest16 { + compatible = "unittest"; + status = "disabled"; + reg = <16>; + }; + + unittest17: test-unittest17 { + compatible = "unittest"; + status = "disabled"; + reg = <17>; + }; + + unittest18: test-unittest18 { + compatible = "unittest"; + status = "disabled"; + reg = <18>; + }; + + unittest19: test-unittest19 { + compatible = "unittest"; + status = "disabled"; + reg = <19>; + }; }; }; @@ -325,5 +349,48 @@ }; }; + /* test enable using indirect functionality */ + overlay16 { + fragment@0 { + target-indirect { + unittest16 { + target = <&unittest16>; + }; + }; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test enable using target root (relative path) */ + overlay17 { + fragment@0 { + target-path = "/"; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test enable using target phandle */ + overlay18 { + fragment@0 { + target = <&unittest18>; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test trying to enable out of root (should fail) */ + overlay19 { + fragment@0 { + target = <&unittest19>; + __overlay__ { + status = "okay"; + }; + }; + }; }; }; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 1801634..55ded19 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -753,6 +753,11 @@ static void __init of_unittest_match_node(void) } } +static struct resource test_bus_res = { + .start = 0xfffffff8, + .end = 0xfffffff9, + .flags = IORESOURCE_MEM, +}; static const struct platform_device_info test_bus_info = { .name = "unittest-bus", }; @@ -795,6 +800,7 @@ static void __init of_unittest_platform_populate(void) if (rc) return; test_bus->dev.of_node = np; + platform_device_add_resources(test_bus, &test_bus_res, 1); of_platform_populate(np, match, NULL, &test_bus->dev); for_each_child_of_node(np, child) { @@ -1852,6 +1858,272 @@ static inline void of_unittest_overlay_i2c_15(void) { } #endif +static void of_unittest_overlay_16(void) +{ + int ret; + int overlay_nr = 16; + int unittest_nr = 16; + enum overlay_type ovtype = PDEV_OVERLAY; + int before = 0; + int after = 1; + struct device_node *np = NULL; + int id = -1; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return; + } + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create_indirect(np, "unittest16"); + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr)); + goto out; + } + id = ret; + of_unittest_track_overlay(id); + + ret = 0; + +out: + of_node_put(np); + + if (ret) + return; + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return; + } + + unittest(1, "overlay test %d passed\n", 16); +} + +static void of_unittest_overlay_17(void) +{ + int ret; + int overlay_nr = 17; + int unittest_nr = 17; + enum overlay_type ovtype = PDEV_OVERLAY; + int before = 0; + int after = 1; + const char *root_path; + struct device_node *np = NULL, *target_root = NULL; + int id = -1; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return; + } + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + root_path = "/testcase-data/overlay-node/test-bus/test-unittest17"; + target_root = of_find_node_by_path(root_path); + if (!target_root) { + unittest(0, "could not find target_root node @\"%s\"\n", + root_path); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create_target_root(np, target_root); + of_node_put(target_root); + + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr)); + goto out; + } + id = ret; + of_unittest_track_overlay(id); + + ret = 0; + +out: + of_node_put(np); + + if (ret) + return; + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return; + } + + unittest(1, "overlay test %d passed\n", 17); +} + +static void of_unittest_overlay_18(void) +{ + int ret; + int overlay_nr = 18; + int unittest_nr = 18; + enum overlay_type ovtype = PDEV_OVERLAY; + int before = 0; + int after = 1; + const char *root_path; + struct device_node *np = NULL, *target_root = NULL; + int id = -1; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return; + } + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + root_path = "/testcase-data/overlay-node/test-bus/test-unittest18"; + target_root = of_find_node_by_path(root_path); + if (!target_root) { + unittest(0, "could not find target_root node @\"%s\"\n", + root_path); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create_target_root(np, target_root); + of_node_put(target_root); + + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr)); + goto out; + } + id = ret; + of_unittest_track_overlay(id); + + ret = 0; + +out: + of_node_put(np); + + if (ret) + return; + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return; + } + + unittest(1, "overlay test %d passed\n", 18); +} + +static void of_unittest_overlay_19(void) +{ + int ret; + int overlay_nr = 19; + int unittest_nr = 19; + enum overlay_type ovtype = PDEV_OVERLAY; + int before = 0; + int after = 0; + const char *root_path; + struct device_node *np = NULL, *target_root = NULL; + int id = -1; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return; + } + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + root_path = "/testcase-data/overlay-node/test-bus/test-unittest19"; + target_root = of_find_node_by_path(root_path); + if (!target_root) { + unittest(0, "could not find target_root node @\"%s\"\n", + root_path); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create_target_root(np, target_root); + of_node_put(target_root); + + if (ret >= 0) { + unittest(0, "created overlay from \"%s\" while we shouldn't\n", + overlay_path(overlay_nr)); + id = ret; + of_unittest_track_overlay(id); + ret = -EINVAL; + goto out; + } + + ret = 0; + +out: + of_node_put(np); + + if (ret) + return; + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return; + } + + unittest(1, "overlay test %d passed\n", 16); +} + + static void __init of_unittest_overlay(void) { struct device_node *bus_np = NULL; @@ -1903,6 +2175,12 @@ static void __init of_unittest_overlay(void) of_unittest_overlay_10(); of_unittest_overlay_11(); + of_unittest_overlay_16(); + + of_unittest_overlay_17(); + of_unittest_overlay_18(); + of_unittest_overlay_19(); + #if IS_BUILTIN(CONFIG_I2C) if (unittest(of_unittest_overlay_i2c_init() == 0, "i2c init failed\n")) goto out; diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 5e343ba..28c711f 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -41,6 +41,19 @@ config STE_MODEM_RPROC This can be either built-in or a loadable module. If unsure say N. +config WKUP_M3_RPROC + tristate "AMx3xx Wakeup M3 remoteproc support" + depends on SOC_AM33XX || SOC_AM43XX + select REMOTEPROC + help + Say y here to support Wakeup M3 remote processor on TI AM33xx + and AM43xx family of SoCs. + + Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed + for deep CPUIdle states on AM33xx SoCs. Allows for loading of the + firmware onto these remote processors. + If unsure say N. + config DA8XX_REMOTEPROC tristate "DA8xx/OMAP-L13x remoteproc support" depends on ARCH_DAVINCI_DA8XX diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index ac2ff75..81b04d1 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -9,4 +9,5 @@ remoteproc-y += remoteproc_virtio.o remoteproc-y += remoteproc_elf_loader.o obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o +obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c index f8d6a06..009e56f 100644 --- a/drivers/remoteproc/da8xx_remoteproc.c +++ b/drivers/remoteproc/da8xx_remoteproc.c @@ -26,8 +26,7 @@ static char *da8xx_fw_name; module_param(da8xx_fw_name, charp, S_IRUGO); MODULE_PARM_DESC(da8xx_fw_name, - "\n\t\tName of DSP firmware file in /lib/firmware" - " (if not specified defaults to 'rproc-dsp-fw')"); + "Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')"); /* * OMAP-L138 Technical References: diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 11cdb11..8b3130f 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -44,6 +44,9 @@ #include "remoteproc_internal.h" +static DEFINE_MUTEX(rproc_list_mutex); +static LIST_HEAD(rproc_list); + typedef int (*rproc_handle_resources_t)(struct rproc *rproc, struct resource_table *table, int len); typedef int (*rproc_handle_resource_t)(struct rproc *rproc, @@ -132,32 +135,48 @@ static void rproc_disable_iommu(struct rproc *rproc) iommu_detach_device(domain, dev); iommu_domain_free(domain); - - return; } -/* +/** + * rproc_da_to_va() - lookup the kernel virtual address for a remoteproc address + * @rproc: handle of a remote processor + * @da: remoteproc device address to translate + * @len: length of the memory region @da is pointing to + * * Some remote processors will ask us to allocate them physically contiguous * memory regions (which we call "carveouts"), and map them to specific - * device addresses (which are hardcoded in the firmware). + * device addresses (which are hardcoded in the firmware). They may also have + * dedicated memory regions internal to the processors, and use them either + * exclusively or alongside carveouts. * * They may then ask us to copy objects into specific device addresses (e.g. * code/data sections) or expose us certain symbols in other device address * (e.g. their trace buffer). * - * This function is an internal helper with which we can go over the allocated - * carveouts and translate specific device address to kernel virtual addresses - * so we can access the referenced memory. + * This function is a helper function with which we can go over the allocated + * carveouts and translate specific device addresses to kernel virtual addresses + * so we can access the referenced memory. This function also allows to perform + * translations on the internal remoteproc memory regions through a platform + * implementation specific da_to_va ops, if present. + * + * The function returns a valid kernel address on success or NULL on failure. * * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too, * but only on kernel direct mapped RAM memory. Instead, we're just using - * here the output of the DMA API, which should be more correct. + * here the output of the DMA API for the carveouts, which should be more + * correct. */ void *rproc_da_to_va(struct rproc *rproc, u64 da, int len) { struct rproc_mem_entry *carveout; void *ptr = NULL; + if (rproc->ops->da_to_va) { + ptr = rproc->ops->da_to_va(rproc, da, len); + if (ptr) + goto out; + } + list_for_each_entry(carveout, &rproc->carveouts, node) { int offset = da - carveout->da; @@ -174,6 +193,7 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, int len) break; } +out: return ptr; } EXPORT_SYMBOL(rproc_da_to_va); @@ -411,10 +431,8 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc, } trace = kzalloc(sizeof(*trace), GFP_KERNEL); - if (!trace) { - dev_err(dev, "kzalloc trace failed\n"); + if (!trace) return -ENOMEM; - } /* set the trace buffer dma properties */ trace->len = rsc->len; @@ -489,10 +507,8 @@ static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc, } mapping = kzalloc(sizeof(*mapping), GFP_KERNEL); - if (!mapping) { - dev_err(dev, "kzalloc mapping failed\n"); + if (!mapping) return -ENOMEM; - } ret = iommu_map(rproc->domain, rsc->da, rsc->pa, rsc->len, rsc->flags); if (ret) { @@ -565,10 +581,8 @@ static int rproc_handle_carveout(struct rproc *rproc, rsc->da, rsc->pa, rsc->len, rsc->flags); carveout = kzalloc(sizeof(*carveout), GFP_KERNEL); - if (!carveout) { - dev_err(dev, "kzalloc carveout failed\n"); + if (!carveout) return -ENOMEM; - } va = dma_alloc_coherent(dev->parent, rsc->len, &dma, GFP_KERNEL); if (!va) { @@ -768,7 +782,8 @@ static void rproc_resource_cleanup(struct rproc *rproc) /* clean up carveout allocations */ list_for_each_entry_safe(entry, tmp, &rproc->carveouts, node) { - dma_free_coherent(dev->parent, entry->len, entry->va, entry->dma); + dma_free_coherent(dev->parent, entry->len, entry->va, + entry->dma); list_del(&entry->node); kfree(entry); } @@ -808,9 +823,8 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) /* look for the resource table */ table = rproc_find_rsc_table(rproc, fw, &tablesz); - if (!table) { + if (!table) goto clean_up; - } /* Verify that resource table in loaded fw is unchanged */ if (rproc->table_csum != crc32(0, table, tablesz)) { @@ -911,7 +925,8 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context) /* count the number of notify-ids */ rproc->max_notifyid = -1; - ret = rproc_handle_resources(rproc, tablesz, rproc_count_vrings_handler); + ret = rproc_handle_resources(rproc, tablesz, + rproc_count_vrings_handler); if (ret) goto out; @@ -1152,6 +1167,50 @@ out: EXPORT_SYMBOL(rproc_shutdown); /** + * rproc_get_by_phandle() - find a remote processor by phandle + * @phandle: phandle to the rproc + * + * Finds an rproc handle using the remote processor's phandle, and then + * return a handle to the rproc. + * + * This function increments the remote processor's refcount, so always + * use rproc_put() to decrement it back once rproc isn't needed anymore. + * + * Returns the rproc handle on success, and NULL on failure. + */ +#ifdef CONFIG_OF +struct rproc *rproc_get_by_phandle(phandle phandle) +{ + struct rproc *rproc = NULL, *r; + struct device_node *np; + + np = of_find_node_by_phandle(phandle); + if (!np) + return NULL; + + mutex_lock(&rproc_list_mutex); + list_for_each_entry(r, &rproc_list, node) { + if (r->dev.parent && r->dev.parent->of_node == np) { + rproc = r; + get_device(&rproc->dev); + break; + } + } + mutex_unlock(&rproc_list_mutex); + + of_node_put(np); + + return rproc; +} +#else +struct rproc *rproc_get_by_phandle(phandle phandle) +{ + return NULL; +} +#endif +EXPORT_SYMBOL(rproc_get_by_phandle); + +/** * rproc_add() - register a remote processor * @rproc: the remote processor handle to register * @@ -1180,6 +1239,11 @@ int rproc_add(struct rproc *rproc) if (ret < 0) return ret; + /* expose to rproc_get_by_phandle users */ + mutex_lock(&rproc_list_mutex); + list_add(&rproc->node, &rproc_list); + mutex_unlock(&rproc_list_mutex); + dev_info(dev, "%s is available\n", rproc->name); dev_info(dev, "Note: remoteproc is still under development and considered experimental.\n"); @@ -1268,10 +1332,8 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, name_len = strlen(name) + strlen(template) - 2 + 1; rproc = kzalloc(sizeof(struct rproc) + len + name_len, GFP_KERNEL); - if (!rproc) { - dev_err(dev, "%s: kzalloc failed\n", __func__); + if (!rproc) return NULL; - } if (!firmware) { p = (char *)rproc + sizeof(struct rproc) + len; @@ -1369,6 +1431,11 @@ int rproc_del(struct rproc *rproc) /* Free the copy of the resource table */ kfree(rproc->cached_table); + /* the rproc is downref'ed as soon as it's removed from the klist */ + mutex_lock(&rproc_list_mutex); + list_del(&rproc->node); + mutex_unlock(&rproc_list_mutex); + device_del(&rproc->dev); return 0; diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h index 70701a5..8041b95 100644 --- a/drivers/remoteproc/remoteproc_internal.h +++ b/drivers/remoteproc/remoteproc_internal.h @@ -35,7 +35,7 @@ struct rproc; * @get_boot_addr: get boot address to entry point specified in firmware */ struct rproc_fw_ops { - struct resource_table *(*find_rsc_table) (struct rproc *rproc, + struct resource_table *(*find_rsc_table)(struct rproc *rproc, const struct firmware *fw, int *tablesz); struct resource_table *(*find_loaded_rsc_table)(struct rproc *rproc, diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c index dd193f3..53dc17b 100644 --- a/drivers/remoteproc/ste_modem_rproc.c +++ b/drivers/remoteproc/ste_modem_rproc.c @@ -67,8 +67,7 @@ static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw) static const struct ste_toc_entry *sproc_find_rsc_entry(const void *data) { int i; - const struct ste_toc *toc; - toc = data; + const struct ste_toc *toc = data; /* Search the table for the resource table */ for (i = 0; i < SPROC_MAX_TOC_ENTRIES && @@ -230,6 +229,7 @@ static int sproc_start(struct rproc *rproc) static int sproc_stop(struct rproc *rproc) { struct sproc *sproc = rproc->priv; + sproc_dbg(sproc, "stop ste-modem\n"); return sproc->mdev->ops.power(sproc->mdev, false); diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c new file mode 100644 index 0000000..edf8181 --- /dev/null +++ b/drivers/remoteproc/wkup_m3_rproc.c @@ -0,0 +1,257 @@ +/* + * TI AMx3 Wakeup M3 Remote Processor driver + * + * Copyright (C) 2014-2015 Texas Instruments, Inc. + * + * Dave Gerlach + * Suman Anna + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "remoteproc_internal.h" + +#define WKUPM3_MEM_MAX 2 + +/** + * struct wkup_m3_mem - WkupM3 internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: Bus address used to access the memory region + * @dev_addr: Device address from Wakeup M3 view + * @size: Size of the memory region + */ +struct wkup_m3_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + u32 dev_addr; + size_t size; +}; + +/** + * struct wkup_m3_rproc - WkupM3 remote processor state + * @rproc: rproc handle + * @pdev: pointer to platform device + * @mem: WkupM3 memory information + */ +struct wkup_m3_rproc { + struct rproc *rproc; + struct platform_device *pdev; + struct wkup_m3_mem mem[WKUPM3_MEM_MAX]; +}; + +static int wkup_m3_rproc_start(struct rproc *rproc) +{ + struct wkup_m3_rproc *wkupm3 = rproc->priv; + struct platform_device *pdev = wkupm3->pdev; + struct device *dev = &pdev->dev; + struct wkup_m3_platform_data *pdata = dev_get_platdata(dev); + + if (pdata->deassert_reset(pdev, pdata->reset_name)) { + dev_err(dev, "Unable to reset wkup_m3!\n"); + return -ENODEV; + } + + return 0; +} + +static int wkup_m3_rproc_stop(struct rproc *rproc) +{ + struct wkup_m3_rproc *wkupm3 = rproc->priv; + struct platform_device *pdev = wkupm3->pdev; + struct device *dev = &pdev->dev; + struct wkup_m3_platform_data *pdata = dev_get_platdata(dev); + + if (pdata->assert_reset(pdev, pdata->reset_name)) { + dev_err(dev, "Unable to assert reset of wkup_m3!\n"); + return -ENODEV; + } + + return 0; +} + +static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, int len) +{ + struct wkup_m3_rproc *wkupm3 = rproc->priv; + void *va = NULL; + int i; + u32 offset; + + if (len <= 0) + return NULL; + + for (i = 0; i < WKUPM3_MEM_MAX; i++) { + if (da >= wkupm3->mem[i].dev_addr && da + len <= + wkupm3->mem[i].dev_addr + wkupm3->mem[i].size) { + offset = da - wkupm3->mem[i].dev_addr; + /* __force to make sparse happy with type conversion */ + va = (__force void *)(wkupm3->mem[i].cpu_addr + offset); + break; + } + } + + return va; +} + +static struct rproc_ops wkup_m3_rproc_ops = { + .start = wkup_m3_rproc_start, + .stop = wkup_m3_rproc_stop, + .da_to_va = wkup_m3_rproc_da_to_va, +}; + +static const struct of_device_id wkup_m3_rproc_of_match[] = { + { .compatible = "ti,am3352-wkup-m3", }, + { .compatible = "ti,am4372-wkup-m3", }, + {}, +}; + +static int wkup_m3_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct wkup_m3_platform_data *pdata = dev->platform_data; + /* umem always needs to be processed first */ + const char *mem_names[WKUPM3_MEM_MAX] = { "umem", "dmem" }; + struct wkup_m3_rproc *wkupm3; + const char *fw_name; + struct rproc *rproc; + struct resource *res; + const __be32 *addrp; + u32 l4_offset = 0; + u64 size; + int ret; + int i; + + if (!(pdata && pdata->deassert_reset && pdata->assert_reset && + pdata->reset_name)) { + dev_err(dev, "Platform data missing!\n"); + return -ENODEV; + } + + ret = of_property_read_string(dev->of_node, "ti,pm-firmware", + &fw_name); + if (ret) { + dev_err(dev, "No firmware filename given\n"); + return -ENODEV; + } + + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); + goto err; + } + + rproc = rproc_alloc(dev, "wkup_m3", &wkup_m3_rproc_ops, + fw_name, sizeof(*wkupm3)); + if (!rproc) { + ret = -ENOMEM; + goto err; + } + + wkupm3 = rproc->priv; + wkupm3->rproc = rproc; + wkupm3->pdev = pdev; + + for (i = 0; i < ARRAY_SIZE(mem_names); i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + mem_names[i]); + wkupm3->mem[i].cpu_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(wkupm3->mem[i].cpu_addr)) { + dev_err(&pdev->dev, "devm_ioremap_resource failed for resource %d\n", + i); + ret = PTR_ERR(wkupm3->mem[i].cpu_addr); + goto err; + } + wkupm3->mem[i].bus_addr = res->start; + wkupm3->mem[i].size = resource_size(res); + addrp = of_get_address(dev->of_node, i, &size, NULL); + /* + * The wkupm3 has umem at address 0 in its view, so the device + * addresses for each memory region is computed as a relative + * offset of the bus address for umem, and therefore needs to be + * processed first. + */ + if (!strcmp(mem_names[i], "umem")) + l4_offset = be32_to_cpu(*addrp); + wkupm3->mem[i].dev_addr = be32_to_cpu(*addrp) - l4_offset; + } + + dev_set_drvdata(dev, rproc); + + ret = rproc_add(rproc); + if (ret) { + dev_err(dev, "rproc_add failed\n"); + goto err_put_rproc; + } + + return 0; + +err_put_rproc: + rproc_put(rproc); +err: + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + return ret; +} + +static int wkup_m3_rproc_remove(struct platform_device *pdev) +{ + struct rproc *rproc = platform_get_drvdata(pdev); + + rproc_del(rproc); + rproc_put(rproc); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int wkup_m3_rpm_suspend(struct device *dev) +{ + return -EBUSY; +} + +static int wkup_m3_rpm_resume(struct device *dev) +{ + return 0; +} +#endif + +static const struct dev_pm_ops wkup_m3_rproc_pm_ops = { + SET_RUNTIME_PM_OPS(wkup_m3_rpm_suspend, wkup_m3_rpm_resume, NULL) +}; + +static struct platform_driver wkup_m3_rproc_driver = { + .probe = wkup_m3_rproc_probe, + .remove = wkup_m3_rproc_remove, + .driver = { + .name = "wkup_m3_rproc", + .of_match_table = wkup_m3_rproc_of_match, + .pm = &wkup_m3_rproc_pm_ops, + }, +}; + +module_platform_driver(wkup_m3_rproc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI Wakeup M3 remote processor control driver"); +MODULE_AUTHOR("Dave Gerlach "); diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index d1a5b9f..0767566 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -138,6 +138,7 @@ struct omap2_mcspi { struct omap2_mcspi_regs ctx; int fifo_depth; unsigned int pin_dir:1; + unsigned int pio_mode:1; }; struct omap2_mcspi_cs { @@ -955,6 +956,9 @@ static int omap2_mcspi_request_dma(struct spi_device *spi) dma_cap_set(DMA_SLAVE, mask); sig = mcspi_dma->dma_rx_sync_dev; + if (mcspi->pio_mode == MCSPI_PIO_MODE) + goto no_dma; + mcspi_dma->dma_rx = dma_request_slave_channel_compat(mask, omap_dma_filter_fn, &sig, &master->dev, @@ -1358,6 +1362,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev) mcspi = spi_master_get_devdata(master); mcspi->master = master; + mcspi->pio_mode = 0; + match = of_match_device(omap_mcspi_of_match, &pdev->dev); if (match) { u32 num_cs = 1; /* default number of chipselect */ @@ -1368,6 +1374,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev) master->bus_num = bus_num++; if (of_get_property(node, "ti,pindir-d0-out-d1-in", NULL)) mcspi->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN; + if (of_get_property(node, "ti,pio-mode", NULL)) + mcspi->pio_mode = MCSPI_PIO_MODE; } else { pdata = dev_get_platdata(&pdev->dev); master->num_chipselect = pdata->num_cs; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 8fab566..11e94a4 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -704,14 +704,6 @@ static const struct file_operations spidev_fops = { static struct class *spidev_class; -#ifdef CONFIG_OF -static const struct of_device_id spidev_dt_ids[] = { - { .compatible = "rohm,dh2228fv" }, - {}, -}; -MODULE_DEVICE_TABLE(of, spidev_dt_ids); -#endif - /*-------------------------------------------------------------------------*/ static int spidev_probe(struct spi_device *spi) @@ -720,17 +712,6 @@ static int spidev_probe(struct spi_device *spi) int status; unsigned long minor; - /* - * spidev should never be referenced in DT without a specific - * compatbile string, it is a Linux implementation thing - * rather than a description of the hardware. - */ - if (spi->dev.of_node && !of_match_device(spidev_dt_ids, &spi->dev)) { - dev_err(&spi->dev, "buggy DT: spidev listed directly in DT\n"); - WARN_ON(spi->dev.of_node && - !of_match_device(spidev_dt_ids, &spi->dev)); - } - /* Allocate driver data */ spidev = kzalloc(sizeof(*spidev), GFP_KERNEL); if (!spidev) @@ -797,6 +778,13 @@ static int spidev_remove(struct spi_device *spi) return 0; } +static const struct of_device_id spidev_dt_ids[] = { + { .compatible = "rohm,dh2228fv" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, spidev_dt_ids); + static struct spi_driver spidev_spi_driver = { .driver = { .name = "spidev", diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index dce1a23..1076fed 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1367,10 +1367,10 @@ static int __init omap8250_console_fixup(void) } add_preferred_console("ttyS", idx, options); - pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", + pr_info("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", idx, idx); - pr_err("This ensures that you still see kernel messages. Please\n"); - pr_err("update your kernel commandline.\n"); + pr_info("This ensures that you still see kernel messages. Please\n"); + pr_info("update your kernel commandline.\n"); return 0; } console_initcall(omap8250_console_fixup); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7f49172..f8be303 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1616,6 +1616,31 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, return 0; } +static int serial_omap_of_get_port_line(struct device_node *np) +{ + unsigned long val; + const char *hwmod; + int ret; + + /* first try the serial alias */ + ret = of_alias_get_id(np, "serial"); + if (ret >= 0) + return ret; + + /* no? calculate it from hwmods */ + ret = of_property_read_string(np, "ti,hwmods", &hwmod); + if (ret != 0 || strncmp(hwmod, "uart", 4) || + kstrtoul(hwmod + 4, 10, &val)) + return -ENODEV; + + /* numbering of hwmods is +1 */ + ret = (int)val - 1; + if (ret < 0) + return -ENODEV; + + return ret; +} + static int serial_omap_probe(struct platform_device *pdev) { struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); @@ -1633,7 +1658,10 @@ static int serial_omap_probe(struct platform_device *pdev) return -EPROBE_DEFER; wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1); omap_up_info = of_get_uart_port_info(&pdev->dev); - pdev->dev.platform_data = omap_up_info; + ret = platform_device_add_data(pdev, omap_up_info, + sizeof(*omap_up_info)); + if (ret != 0) + return ret; } else { uartirq = platform_get_irq(pdev, 0); if (uartirq < 0) @@ -1659,7 +1687,7 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.ops = &serial_omap_pops; if (pdev->dev.of_node) - ret = of_alias_get_id(pdev->dev.of_node, "serial"); + ret = serial_omap_of_get_port_line(pdev->dev.of_node); else ret = pdev->id; diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 8a15c32..01d921c 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -126,10 +126,10 @@ config UIO_FSL_ELBC_GPCM_NETX5152 config UIO_PRUSS tristate "Texas Instruments PRUSS driver" - depends on ARCH_DAVINCI_DA850 + depends on ARCH_DAVINCI_DA850 || SOC_AM33XX select GENERIC_ALLOCATOR help - PRUSS driver for OMAPL138/DA850/AM18XX devices + PRUSS driver for OMAPL138/DA850/AM18XX and AM33XX devices PRUSS driver requires user space components, examples and user space driver is available from below SVN repo - you may use anonymous login diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c index 818735b..c237040 100644 --- a/drivers/uio/uio_pruss.c +++ b/drivers/uio/uio_pruss.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -26,6 +27,11 @@ #include #include #include +#include +#include +#include +#include +#include #define DRV_NAME "pruss_uio" #define DRV_VERSION "1.0" @@ -105,10 +111,12 @@ static void pruss_cleanup(struct device *dev, struct uio_pruss_dev *gdev) dma_free_coherent(dev, extram_pool_sz, gdev->ddr_vaddr, gdev->ddr_paddr); } +#ifdef CONFIG_ARCH_DAVINCI_DA850 if (gdev->sram_vaddr) gen_pool_free(gdev->sram_pool, gdev->sram_vaddr, sram_pool_sz); +#endif kfree(gdev->info); clk_put(gdev->pruss_clk); kfree(gdev); @@ -119,9 +127,15 @@ static int pruss_probe(struct platform_device *pdev) struct uio_info *p; struct uio_pruss_dev *gdev; struct resource *regs_prussio; + struct resource res; struct device *dev = &pdev->dev; int ret = -ENODEV, cnt = 0, len; struct uio_pruss_pdata *pdata = dev_get_platdata(dev); + struct pinctrl *pinctrl; + + int count; + struct device_node *child; + const char *pin_name; gdev = kzalloc(sizeof(struct uio_pruss_dev), GFP_KERNEL); if (!gdev) @@ -132,7 +146,7 @@ static int pruss_probe(struct platform_device *pdev) kfree(gdev); return -ENOMEM; } - +#ifdef CONFIG_ARCH_DAVINCI_DA850 /* Power on PRU in case its not done as part of boot-loader */ gdev->pruss_clk = clk_get(dev, "pruss"); if (IS_ERR(gdev->pruss_clk)) { @@ -144,8 +158,25 @@ static int pruss_probe(struct platform_device *pdev) } else { clk_enable(gdev->pruss_clk); } +#endif + + if (pdev->dev.of_node) { + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); + return ret; + } - regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ret = of_address_to_resource(pdev->dev.of_node, 0, &res); + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "failed to parse DT reg\n"); + return ret; + } + regs_prussio = &res; + } + else + regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs_prussio) { dev_err(dev, "No PRUSS I/O resource specified\n"); goto out_free; @@ -156,7 +187,50 @@ static int pruss_probe(struct platform_device *pdev) goto out_free; } - if (pdata->sram_pool) { + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + else{ + count = of_get_child_count(pdev->dev.of_node); + if (!count){ + dev_info(&pdev->dev, "No children\n"); + return -ENODEV; + } + // Run through all children. They have lables for easy reference. + for_each_child_of_node(pdev->dev.of_node, child){ + enum of_gpio_flags flags; + unsigned gpio; + + count = of_gpio_count(child); + + ret = of_property_count_strings(child, "pin-names"); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get pin-names\n"); + continue; + } + if(count != ret){ + dev_err(&pdev->dev, "The number of gpios (%d) does not match"\ + " the number of pin names (%d)\n", count, ret); + continue; + } + + for(cnt=0; cntdev, "Error on pin-name #%d\n", cnt); + gpio = of_get_gpio_flags(child, cnt, &flags); + ret = devm_gpio_request_one(&pdev->dev, gpio, flags, pin_name); + if (ret < 0) { + dev_err(dev, "Failed to request GPIO %d (%s) flags: '%d', error %d\n", + gpio, pin_name, flags, ret); + } + } + } + } + if (pdata && pdata->sram_pool) { gdev->sram_pool = pdata->sram_pool; gdev->sram_vaddr = (unsigned long)gen_pool_dma_alloc(gdev->sram_pool, @@ -181,7 +255,17 @@ static int pruss_probe(struct platform_device *pdev) goto out_free; } - gdev->pintc_base = pdata->pintc_base; + if (pdev->dev.of_node) { + ret = of_property_read_u32(pdev->dev.of_node, + "ti,pintc-offset", + &gdev->pintc_base); + if (ret < 0) { + dev_err(&pdev->dev, + "Can't parse ti,pintc-offset property\n"); + goto out_free; + } + } else + gdev->pintc_base = pdata->pintc_base; gdev->hostirq_start = platform_get_irq(pdev, 0); for (cnt = 0, p = gdev->info; cnt < MAX_PRUSS_EVT; cnt++, p++) { @@ -189,6 +273,7 @@ static int pruss_probe(struct platform_device *pdev) p->mem[0].size = resource_size(regs_prussio); p->mem[0].memtype = UIO_MEM_PHYS; +#ifdef CONFIG_ARCH_DAVINCI_DA850 p->mem[1].addr = gdev->sram_paddr; p->mem[1].size = sram_pool_sz; p->mem[1].memtype = UIO_MEM_PHYS; @@ -196,7 +281,11 @@ static int pruss_probe(struct platform_device *pdev) p->mem[2].addr = gdev->ddr_paddr; p->mem[2].size = extram_pool_sz; p->mem[2].memtype = UIO_MEM_PHYS; - +#else + p->mem[1].addr = gdev->ddr_paddr; + p->mem[1].size = extram_pool_sz; + p->mem[1].memtype = UIO_MEM_PHYS; +#endif p->name = kasprintf(GFP_KERNEL, "pruss_evt%d", cnt); p->version = DRV_VERSION; @@ -226,11 +315,20 @@ static int pruss_remove(struct platform_device *dev) return 0; } +static const struct of_device_id pruss_dt_ids[] = { + { .compatible = "ti,pruss-v1", .data = NULL, }, + { .compatible = "ti,pruss-v2", .data = NULL, }, + {}, +}; +MODULE_DEVICE_TABLE(of, pruss_dt_ids); + + static struct platform_driver pruss_driver = { .probe = pruss_probe, .remove = pruss_remove, .driver = { .name = DRV_NAME, + .of_match_table = pruss_dt_ids, }, }; diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index 140945c..8f4cd92 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include @@ -83,6 +84,7 @@ struct usbmisc_ops { struct imx_usbmisc { void __iomem *base; spinlock_t lock; + struct clk *clk; const struct usbmisc_ops *ops; }; @@ -426,6 +428,7 @@ static int usbmisc_imx_probe(struct platform_device *pdev) { struct resource *res; struct imx_usbmisc *data; + int ret; struct of_device_id *tmp_dev; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); @@ -439,6 +442,20 @@ static int usbmisc_imx_probe(struct platform_device *pdev) if (IS_ERR(data->base)) return PTR_ERR(data->base); + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) { + dev_err(&pdev->dev, + "failed to get clock, err=%ld\n", PTR_ERR(data->clk)); + return PTR_ERR(data->clk); + } + + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&pdev->dev, + "clk_prepare_enable failed, err=%d\n", ret); + return ret; + } + tmp_dev = (struct of_device_id *) of_match_device(usbmisc_imx_dt_ids, &pdev->dev); data->ops = (const struct usbmisc_ops *)tmp_dev->data; @@ -449,6 +466,8 @@ static int usbmisc_imx_probe(struct platform_device *pdev) static int usbmisc_imx_remove(struct platform_device *pdev) { + struct imx_usbmisc *usbmisc = dev_get_drvdata(&pdev->dev); + clk_disable_unprepare(usbmisc->clk); return 0; } diff --git a/firmware/am335x-bone-scale-data.bin b/firmware/am335x-bone-scale-data.bin new file mode 100644 index 0000000000000000000000000000000000000000..296903ec2c0fe1518566039b601b445c270e1c98 GIT binary patch literal 72 ocmd-HXHa4=VN&7FWl|AfLZWk+R0P|Ad@v1H!2wkPqES=;07<$Dx&QzG literal 0 HcmV?d00001 diff --git a/firmware/am335x-evm-scale-data.bin b/firmware/am335x-evm-scale-data.bin new file mode 100644 index 0000000000000000000000000000000000000000..7e18ce7208b7d0d669dd6e199a7969bf98a74ee8 GIT binary patch literal 16 Tcmd-HXJBJ6VbWEV2b0OLB0@CSBDpGB5k(n?N0C+M6fdBvi literal 0 HcmV?d00001 diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h index b65d1ef..ccc31fa 100644 --- a/fs/configfs/configfs_internal.h +++ b/fs/configfs/configfs_internal.h @@ -53,13 +53,14 @@ struct configfs_dirent { #define CONFIGFS_ROOT 0x0001 #define CONFIGFS_DIR 0x0002 #define CONFIGFS_ITEM_ATTR 0x0004 +#define CONFIGFS_ITEM_BIN_ATTR 0x0008 #define CONFIGFS_ITEM_LINK 0x0020 #define CONFIGFS_USET_DIR 0x0040 #define CONFIGFS_USET_DEFAULT 0x0080 #define CONFIGFS_USET_DROPPING 0x0100 #define CONFIGFS_USET_IN_MKDIR 0x0200 #define CONFIGFS_USET_CREATING 0x0400 -#define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR) +#define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR | CONFIGFS_ITEM_BIN_ATTR) extern struct mutex configfs_symlink_mutex; extern spinlock_t configfs_dirent_lock; @@ -72,6 +73,8 @@ extern struct inode * configfs_new_inode(umode_t mode, struct configfs_dirent *, extern int configfs_create(struct dentry *, umode_t mode, void (*init)(struct inode *)); extern int configfs_create_file(struct config_item *, const struct configfs_attribute *); +extern int configfs_create_bin_file(struct config_item *, + const struct configfs_bin_attribute *); extern int configfs_make_dirent(struct configfs_dirent *, struct dentry *, void *, umode_t, int); extern int configfs_dirent_is_ready(struct configfs_dirent *); @@ -88,7 +91,7 @@ extern void configfs_release_fs(void); extern struct rw_semaphore configfs_rename_sem; extern const struct file_operations configfs_dir_operations; extern const struct file_operations configfs_file_operations; -extern const struct file_operations bin_fops; +extern const struct file_operations configfs_bin_file_operations; extern const struct inode_operations configfs_dir_inode_operations; extern const struct inode_operations configfs_root_inode_operations; extern const struct inode_operations configfs_symlink_inode_operations; @@ -119,6 +122,13 @@ static inline struct configfs_attribute * to_attr(struct dentry * dentry) return ((struct configfs_attribute *) sd->s_element); } +static inline struct configfs_bin_attribute *to_bin_attr(struct dentry *dentry) +{ + struct configfs_attribute *attr = to_attr(dentry); + + return container_of(attr, struct configfs_bin_attribute, cb_attr); +} + static inline struct config_item *configfs_get_config_item(struct dentry *dentry) { struct config_item * item = NULL; diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index c81ce7f..8951466 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -255,6 +255,12 @@ static void configfs_init_file(struct inode * inode) inode->i_fop = &configfs_file_operations; } +static void configfs_init_bin_file(struct inode *inode) +{ + inode->i_size = 0; + inode->i_fop = &configfs_bin_file_operations; +} + static void init_symlink(struct inode * inode) { inode->i_op = &configfs_symlink_inode_operations; @@ -423,7 +429,9 @@ static int configfs_attach_attr(struct configfs_dirent * sd, struct dentry * den spin_unlock(&configfs_dirent_lock); error = configfs_create(dentry, (attr->ca_mode & S_IALLUGO) | S_IFREG, - configfs_init_file); + (sd->s_type & CONFIGFS_ITEM_ATTR) ? + configfs_init_file : + configfs_init_bin_file); if (error) { configfs_put(sd); return error; @@ -583,6 +591,7 @@ static int populate_attrs(struct config_item *item) { struct config_item_type *t = item->ci_type; struct configfs_attribute *attr; + struct configfs_bin_attribute *bin_attr; int error = 0; int i; @@ -594,6 +603,13 @@ static int populate_attrs(struct config_item *item) break; } } + if (t->ct_bin_attrs) { + for (i = 0; (bin_attr = t->ct_bin_attrs[i]) != NULL; i++) { + error = configfs_create_bin_file(item, bin_attr); + if (error) + break; + } + } if (error) detach_attrs(item); diff --git a/fs/configfs/file.c b/fs/configfs/file.c index 403269f..af6cb78 100644 --- a/fs/configfs/file.c +++ b/fs/configfs/file.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -48,6 +49,10 @@ struct configfs_buffer { struct configfs_item_operations * ops; struct mutex mutex; int needs_read_fill; + int read_in_progress; + int write_in_progress; + char *bin_buffer; + int bin_buffer_size; }; @@ -107,8 +112,16 @@ static ssize_t configfs_read_file(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct configfs_buffer * buffer = file->private_data; + struct configfs_dirent *sd; ssize_t retval = 0; + sd = file->f_path.dentry->d_fsdata; + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (WARN_ON(!(sd->s_type & CONFIGFS_ITEM_ATTR))) + return -EINVAL; + mutex_lock(&buffer->mutex); if (buffer->needs_read_fill) { if ((retval = fill_read_buffer(file->f_path.dentry,buffer))) @@ -123,6 +136,97 @@ out: return retval; } +/** + * configfs_read_bin_file - read a binary attribute. + * @file: file pointer. + * @buf: buffer to fill. + * @count: number of bytes to read. + * @ppos: starting offset in file. + * + * Userspace wants to read a binary attribute file. The attribute + * descriptor is in the file's ->d_fsdata. The target item is in the + * directory's ->d_fsdata. + * + * We check whether we need to refill the buffer. If so we will + * call the attributes' ops->read_bin_attribute() twice. The first time we + * will pass a NULL as a buffer pointer, which the attributes' method + * will use to return the size of the buffer required. If no error + * occurs we will allocate the buffer using vmalloc and call + * ops->read_bin_atribute() again passing that buffer as an argument. + * Then we just copy to user-space using simple_read_from_buffer. + */ + +static ssize_t +configfs_read_bin_file(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct configfs_buffer *buffer = file->private_data; + struct dentry *dentry = file->f_path.dentry; + struct configfs_dirent *sd = dentry->d_fsdata; + struct config_item *item = to_item(dentry->d_parent); + struct configfs_item_operations *ops = buffer->ops; + struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry); + ssize_t retval = 0; + ssize_t len = min_t(size_t, count, PAGE_SIZE); + + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (WARN_ON(!(sd->s_type & CONFIGFS_ITEM_BIN_ATTR))) + return -EINVAL; + + mutex_lock(&buffer->mutex); + + /* we don't support switching read/write modes */ + if (buffer->write_in_progress) { + retval = -EINVAL; + goto out; + } + buffer->read_in_progress = 1; + + if (buffer->needs_read_fill) { + + /* perform first read with buf == NULL to get extent */ + len = ops->read_bin_attribute(item, bin_attr, NULL, 0); + if (len < 0) { + retval = len; + goto out; + } + + /* do not exceed the maximum value */ + if (bin_attr->cb_max_size && len > bin_attr->cb_max_size) { + retval = -EFBIG; + goto out; + } + + buffer->bin_buffer = vmalloc(len); + if (buffer->bin_buffer == NULL) { + retval = -ENOMEM; + goto out; + } + buffer->bin_buffer_size = len; + + /* perform second read to fill buffer */ + len = ops->read_bin_attribute(item, bin_attr, + buffer->bin_buffer, len); + if (len < 0) { + retval = len; + vfree(buffer->bin_buffer); + buffer->bin_buffer_size = 0; + buffer->bin_buffer = NULL; + goto out; + } + + buffer->needs_read_fill = 0; + } + + retval = simple_read_from_buffer(buf, count, ppos, buffer->bin_buffer, + buffer->bin_buffer_size); +out: + mutex_unlock(&buffer->mutex); + return retval; +} + /** * fill_write_buffer - copy buffer from userspace. @@ -197,9 +301,16 @@ flush_write_buffer(struct dentry * dentry, struct configfs_buffer * buffer, size static ssize_t configfs_write_file(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - struct configfs_buffer * buffer = file->private_data; + struct configfs_buffer *buffer = file->private_data; + struct configfs_dirent *sd = file->f_path.dentry->d_fsdata; ssize_t len; + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (WARN_ON(!(sd->s_type & CONFIGFS_ITEM_ATTR))) + return -EINVAL; + mutex_lock(&buffer->mutex); len = fill_write_buffer(buffer, buf, count); if (len > 0) @@ -210,10 +321,86 @@ configfs_write_file(struct file *file, const char __user *buf, size_t count, lof return len; } -static int check_perm(struct inode * inode, struct file * file) +/** + * configfs_write_bin_file - write a binary attribute. + * @file: file pointer + * @buf: data to write + * @count: number of bytes + * @ppos: starting offset + * + * Writing to a binary attribute file is similar to a normal read. + * We buffer the consecutive writes (binary attribute files do not + * support lseek) in a continuously growing buffer, but we don't + * commit until the close of the file. + */ + +static ssize_t +configfs_write_bin_file(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct configfs_buffer *buffer = file->private_data; + struct dentry *dentry = file->f_path.dentry; + struct configfs_dirent *sd = dentry->d_fsdata; + struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry); + void *tbuf = NULL; + ssize_t len; + + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (WARN_ON(!(sd->s_type & CONFIGFS_ITEM_BIN_ATTR))) + return -EINVAL; + + mutex_lock(&buffer->mutex); + + /* we don't support switching read/write modes */ + if (buffer->read_in_progress) { + len = -EINVAL; + goto out; + } + buffer->write_in_progress = 1; + + /* buffer grows? */ + if (*ppos + count > buffer->bin_buffer_size) { + + if (bin_attr->cb_max_size && + *ppos + count > bin_attr->cb_max_size) { + len = -EFBIG; + } + + tbuf = vmalloc(*ppos + count); + if (tbuf == NULL) { + len = -ENOMEM; + goto out; + } + + /* copy old contents */ + if (buffer->bin_buffer) { + memcpy(tbuf, buffer->bin_buffer, + buffer->bin_buffer_size); + vfree(buffer->bin_buffer); + } + + /* clear the new area */ + memset(tbuf + buffer->bin_buffer_size, 0, + *ppos + count - buffer->bin_buffer_size); + buffer->bin_buffer = tbuf; + buffer->bin_buffer_size = *ppos + count; + } + + len = simple_write_to_buffer(buffer->bin_buffer, + buffer->bin_buffer_size, ppos, buf, count); + if (len > 0) + *ppos += len; +out: + mutex_unlock(&buffer->mutex); + return len; +} + +static int check_perm(struct inode *inode, struct file *file, + struct config_item *item, struct configfs_attribute *attr, + int type) { - struct config_item *item = configfs_get_config_item(file->f_path.dentry->d_parent); - struct configfs_attribute * attr = to_attr(file->f_path.dentry); struct configfs_buffer * buffer; struct configfs_item_operations * ops = NULL; int error = 0; @@ -238,9 +425,16 @@ static int check_perm(struct inode * inode, struct file * file) */ if (file->f_mode & FMODE_WRITE) { - if (!(inode->i_mode & S_IWUGO) || !ops->store_attribute) + if (!(inode->i_mode & S_IWUGO)) goto Eaccess; + if ((type & CONFIGFS_ITEM_ATTR) && + !ops->store_attribute) + goto Eaccess; + + if ((type & CONFIGFS_ITEM_BIN_ATTR) && + !ops->write_bin_attribute) + goto Eaccess; } /* File needs read support. @@ -248,7 +442,13 @@ static int check_perm(struct inode * inode, struct file * file) * must be a show method for it. */ if (file->f_mode & FMODE_READ) { - if (!(inode->i_mode & S_IRUGO) || !ops->show_attribute) + if (!(inode->i_mode & S_IRUGO)) + goto Eaccess; + + if ((type & CONFIGFS_ITEM_ATTR) && !ops->show_attribute) + goto Eaccess; + + if ((type & CONFIGFS_ITEM_BIN_ATTR) && !ops->read_bin_attribute) goto Eaccess; } @@ -262,6 +462,8 @@ static int check_perm(struct inode * inode, struct file * file) } mutex_init(&buffer->mutex); buffer->needs_read_fill = 1; + buffer->read_in_progress = 0; + buffer->write_in_progress = 0; buffer->ops = ops; file->private_data = buffer; goto Done; @@ -279,17 +481,12 @@ static int check_perm(struct inode * inode, struct file * file) return error; } -static int configfs_open_file(struct inode * inode, struct file * filp) -{ - return check_perm(inode,filp); -} - -static int configfs_release(struct inode * inode, struct file * filp) +static int do_release(struct inode *inode, struct file *filp, + struct config_item *item, struct configfs_attribute *attr, + int type) { - struct config_item * item = to_item(filp->f_path.dentry->d_parent); - struct configfs_attribute * attr = to_attr(filp->f_path.dentry); - struct module * owner = attr->ca_owner; - struct configfs_buffer * buffer = filp->private_data; + struct module *owner = attr->ca_owner; + struct configfs_buffer *buffer = filp->private_data; if (item) config_item_put(item); @@ -305,12 +502,86 @@ static int configfs_release(struct inode * inode, struct file * filp) return 0; } +static int configfs_open_file(struct inode *inode, struct file *filp) +{ + return check_perm(inode, filp, + configfs_get_config_item(filp->f_path.dentry->d_parent), + to_attr(filp->f_path.dentry), CONFIGFS_ITEM_ATTR); +} + +static int configfs_release_file(struct inode *inode, struct file *filp) +{ + return do_release(inode, filp, + to_item(filp->f_path.dentry->d_parent), + to_attr(filp->f_path.dentry), CONFIGFS_ITEM_ATTR); +} + +static int configfs_open_bin_file(struct inode *inode, struct file *filp) +{ + return check_perm(inode, filp, + configfs_get_config_item(filp->f_path.dentry->d_parent), + to_attr(filp->f_path.dentry), CONFIGFS_ITEM_BIN_ATTR); +} + +/** + * configfs_release_bin_file - write a binary attribute. + * @inode: inode pointer + * @filp: file pointer + * + * Releasing a binary attribute file is similar for a read op + * to the normal attribute file. When writing we call the + * attributes' ops->write_bin_attribute() method to commit the + * changes to the attribute. + */ + +static int configfs_release_bin_file(struct inode *inode, struct file *filp) +{ + struct configfs_buffer *buffer = filp->private_data; + struct dentry *dentry = filp->f_path.dentry; + struct config_item *item = to_item(dentry->d_parent); + struct configfs_item_operations *ops = buffer->ops; + struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry); + ssize_t len = 0; + int ret; + + buffer->read_in_progress = 0; + + if (buffer->write_in_progress) { + buffer->write_in_progress = 0; + + len = ops->write_bin_attribute(item, bin_attr, + buffer->bin_buffer, buffer->bin_buffer_size); + + /* vfree on NULL is safe */ + vfree(buffer->bin_buffer); + buffer->bin_buffer = NULL; + buffer->bin_buffer_size = 0; + buffer->needs_read_fill = 1; + } + + ret = do_release(inode, filp, + to_item(filp->f_path.dentry->d_parent), + to_attr(filp->f_path.dentry), CONFIGFS_ITEM_BIN_ATTR); + if (len < 0) + return len; + return ret; +} + + const struct file_operations configfs_file_operations = { .read = configfs_read_file, .write = configfs_write_file, .llseek = generic_file_llseek, .open = configfs_open_file, - .release = configfs_release, + .release = configfs_release_file, +}; + +const struct file_operations configfs_bin_file_operations = { + .read = configfs_read_bin_file, + .write = configfs_write_bin_file, + .llseek = NULL, /* bin file is not seekable */ + .open = configfs_open_bin_file, + .release = configfs_release_bin_file, }; /** @@ -334,3 +605,24 @@ int configfs_create_file(struct config_item * item, const struct configfs_attrib return error; } +/** + * configfs_create_bin_file - create a binary attribute file for an item. + * @item: item we're creating for. + * @attr: atrribute descriptor. + */ + +int configfs_create_bin_file(struct config_item *item, + const struct configfs_bin_attribute *bin_attr) +{ + struct dentry *dir = item->ci_dentry; + struct configfs_dirent *parent_sd = dir->d_fsdata; + umode_t mode = (bin_attr->cb_attr.ca_mode & S_IALLUGO) | S_IFREG; + int error = 0; + + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_NORMAL); + error = configfs_make_dirent(parent_sd, NULL, (void *) bin_attr, mode, + CONFIGFS_ITEM_BIN_ATTR); + mutex_unlock(&dir->d_inode->i_mutex); + + return error; +} diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c index 8d89f5f..35f80aa 100644 --- a/fs/configfs/inode.c +++ b/fs/configfs/inode.c @@ -218,7 +218,7 @@ const unsigned char * configfs_get_name(struct configfs_dirent *sd) if (sd->s_type & (CONFIGFS_DIR | CONFIGFS_ITEM_LINK)) return sd->s_dentry->d_name.name; - if (sd->s_type & CONFIGFS_ITEM_ATTR) { + if (sd->s_type & (CONFIGFS_ITEM_ATTR | CONFIGFS_ITEM_BIN_ATTR)) { attr = sd->s_element; return attr->ca_name; } diff --git a/include/dt-bindings/board/am335x-bbw-bbb-base.h b/include/dt-bindings/board/am335x-bbw-bbb-base.h new file mode 100644 index 0000000..35f6d57 --- /dev/null +++ b/include/dt-bindings/board/am335x-bbw-bbb-base.h @@ -0,0 +1,103 @@ +/* + * This header provides constants for bbw/bbb pinctrl bindings. + * + * Copyright (C) 2014 Robert Nelson + * + * Numbers Based on: https://github.com/derekmolloy/boneDeviceTree/tree/master/docs + */ + +#ifndef _DT_BINDINGS_BOARD_AM335X_BBW_BBB_BASE_H +#define _DT_BINDINGS_BOARD_AM335X_BBW_BBB_BASE_H + +#define BONE_P8_03 0x018 +#define BONE_P8_04 0x01C + +#define BONE_P8_05 0x008 +#define BONE_P8_06 0x00C +#define BONE_P8_07 0x090 +#define BONE_P8_08 0x094 + +#define BONE_P8_09 0x09C +#define BONE_P8_10 0x098 +#define BONE_P8_11 0x034 +#define BONE_P8_12 0x030 + +#define BONE_P8_13 0x024 +#define BONE_P8_14 0x028 +#define BONE_P8_15 0x03C +#define BONE_P8_16 0x038 + +#define BONE_P8_17 0x02C +#define BONE_P8_18 0x08C +#define BONE_P8_19 0x020 +#define BONE_P8_20 0x084 + +#define BONE_P8_21 0x080 +#define BONE_P8_22 0x014 +#define BONE_P8_23 0x010 +#define BONE_P8_24 0x004 + +#define BONE_P8_25 0x000 +#define BONE_P8_26 0x07C +#define BONE_P8_27 0x0E0 +#define BONE_P8_28 0x0E8 + +#define BONE_P8_29 0x0E4 +#define BONE_P8_30 0x0EC +#define BONE_P8_31 0x0D8 +#define BONE_P8_32 0x0DC + +#define BONE_P8_33 0x0D4 +#define BONE_P8_34 0x0CC +#define BONE_P8_35 0x0D0 +#define BONE_P8_36 0x0C8 + +#define BONE_P8_37 0x0C0 +#define BONE_P8_38 0x0C4 +#define BONE_P8_39 0x0B8 +#define BONE_P8_40 0x0BC + +#define BONE_P8_41 0x0B0 +#define BONE_P8_42 0x0B4 +#define BONE_P8_43 0x0A8 +#define BONE_P8_44 0x0AC + +#define BONE_P8_45 0x0A0 +#define BONE_P8_46 0x0A4 + +#define BONE_P9_11 0x070 +#define BONE_P9_12 0x078 + +#define BONE_P9_13 0x074 +#define BONE_P9_14 0x048 +#define BONE_P9_15 0x040 +#define BONE_P9_16 0x04C + +#define BONE_P9_17 0x15C +#define BONE_P9_18 0x158 +#define BONE_P9_19 0x17C +#define BONE_P9_20 0x178 + +#define BONE_P9_21 0x154 +#define BONE_P9_22 0x150 +#define BONE_P9_23 0x044 +#define BONE_P9_24 0x184 + +#define BONE_P9_25 0x1AC +#define BONE_P9_26 0x180 +#define BONE_P9_27 0x1A4 +#define BONE_P9_28 0x19C + +#define BONE_P9_29 0x194 +#define BONE_P9_30 0x198 +#define BONE_P9_31 0x190 + +/* Shared P21 of P11 */ +#define BONE_P9_41A 0x1B4 +#define BONE_P9_41B 0x1A8 + +/* Shared P22 of P11 */ +#define BONE_P9_42A 0x164 +#define BONE_P9_42B 0x1A0 + +#endif diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 79b76e1..2d456e4 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -275,6 +275,12 @@ long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long max_rate, unsigned long *best_parent_rate, struct clk_hw **best_parent_clk); +long omap3630_noncore_dpll_determine_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk); unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, unsigned long parent_rate); long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, @@ -290,6 +296,9 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw); unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, unsigned long *parent_rate); +long omap2_dpll5_round_rate(struct clk_hw *hw, unsigned long target_rate, + unsigned long *parent_rate); + void omap2_init_clk_clkdm(struct clk_hw *clk); unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 34025df..2e416b4 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -51,6 +51,7 @@ struct module; struct configfs_item_operations; struct configfs_group_operations; struct configfs_attribute; +struct configfs_bin_attribute; struct configfs_subsystem; struct config_item { @@ -84,6 +85,7 @@ struct config_item_type { struct configfs_item_operations *ct_item_ops; struct configfs_group_operations *ct_group_ops; struct configfs_attribute **ct_attrs; + struct configfs_bin_attribute **ct_bin_attrs; }; /** @@ -207,6 +209,96 @@ static ssize_t _item##_attr_store(struct config_item *item, \ return ret; \ } +struct file; +struct vm_area_struct; + +struct configfs_bin_attribute { + struct configfs_attribute cb_attr; /* std. attribute */ + void *cb_private; /* for user */ + size_t cb_max_size; /* max core size */ +}; + +/* + * Similar to CONFIGFS_ATTR_STRUCT + */ +#define CONFIGFS_BIN_ATTR_STRUCT(_item) \ +struct _item##_bin_attribute { \ + struct configfs_bin_attribute bin_attr; \ + ssize_t (*read)(struct _item *, void *, size_t); \ + ssize_t (*write)(struct _item *, const void *, size_t); \ +} + +/* macros to create static binary attributes easier */ +#define __CONFIGFS_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) \ +{ \ + .bin_attr = { \ + .cb_attr = { \ + .ca_name = __stringify(_name), \ + .ca_mode = _mode, \ + .ca_owner = THIS_MODULE, \ + }, \ + .cb_private = _priv, \ + .cb_max_size = _max, \ + }, \ + .read = _read, \ + .write = _write, \ +} + +#define __CONFIGFS_BIN_ATTR_RO(_name, _priv, _max) { \ + .bin_attr = { \ + .cb_attr = { \ + .ca_name = __stringify(_name), \ + .ca_mode = _mode, \ + .ca_owner = THIS_MODULE, \ + }, \ + .cb_private = _priv, \ + .cb_max_size = _max, \ + }, \ + .read = _read, \ +} + +#define __CONFIGFS_BIN_ATTR_RW(_name) \ + __CONFIGFS_BIN_ATTR(_name, (S_IWUSR | S_IRUGO), \ + _name##_read, _name##_write) + +#define CONFIGFS_BIN_ATTR(_name, _mode, _read, _write) \ +struct configfs_bin_attribute bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR(_name, _mode, _read, _write) + +#define CONFIGFS_BIN_ATTR_RO(_name) \ +struct configfs_bin_attribute bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR_RO(_name) + +#define CONFIGFS_BIN_ATTR_OPS(_item) \ +static ssize_t _item##_bin_attr_read(struct config_item *item, \ + struct configfs_bin_attribute *bin_attr, \ + void *buf, size_t max_count) \ +{ \ + struct _item *_item = to_##_item(item); \ + struct _item##_bin_attribute *_item##_bin_attr = \ + container_of(bin_attr, struct _item##_bin_attribute, \ + bin_attr); \ + ssize_t ret = 0; \ + \ + if (_item##_bin_attr->read) \ + ret = _item##_bin_attr->read(_item, buf, max_count); \ + return ret; \ +} \ +static ssize_t _item##_bin_attr_write(struct config_item *item, \ + struct configfs_bin_attribute *bin_attr, \ + const void *buf, size_t count) \ +{ \ + struct _item *_item = to_##_item(item); \ + struct _item##_bin_attribute *_item##_bin_attr = \ + container_of(bin_attr, struct _item##_bin_attribute, \ + bin_attr); \ + ssize_t ret = -EINVAL; \ + \ + if (_item##_bin_attr->write) \ + ret = _item##_bin_attr->write(_item, buf, count); \ + return ret; \ +} + /* * If allow_link() exists, the item can symlink(2) out to other * items. If the item is a group, it may support mkdir(2). @@ -225,6 +317,12 @@ struct configfs_item_operations { void (*release)(struct config_item *); ssize_t (*show_attribute)(struct config_item *, struct configfs_attribute *,char *); ssize_t (*store_attribute)(struct config_item *,struct configfs_attribute *,const char *, size_t); + ssize_t (*read_bin_attribute)(struct config_item *, + struct configfs_bin_attribute *, + void *, size_t); + ssize_t (*write_bin_attribute)(struct config_item *, + struct configfs_bin_attribute *, + const void *, size_t); int (*allow_link)(struct config_item *src, struct config_item *target); int (*drop_link)(struct config_item *src, struct config_item *target); }; diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index 3343298..859d673 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -26,6 +26,7 @@ #define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */ struct device; +struct device_node; struct hwspinlock; struct hwspinlock_device; struct hwspinlock_ops; @@ -66,6 +67,7 @@ int hwspin_lock_unregister(struct hwspinlock_device *bank); struct hwspinlock *hwspin_lock_request(void); struct hwspinlock *hwspin_lock_request_specific(unsigned int id); int hwspin_lock_free(struct hwspinlock *hwlock); +int of_hwspin_lock_get_id(struct device_node *np, int index); int hwspin_lock_get_id(struct hwspinlock *hwlock); int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int, unsigned long *); @@ -120,6 +122,11 @@ void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags) { } +static inline int of_hwspin_lock_get_id(struct device_node *np, int index) +{ + return 0; +} + static inline int hwspin_lock_get_id(struct hwspinlock *hwlock) { return 0; diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index ac7fba4..05d24a6 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -257,6 +257,11 @@ struct tps65217 { unsigned long id; struct regulator_desc desc[TPS65217_NUM_REGULATOR]; struct regmap *regmap; + + /* Power button and IRQ handling */ + int irq_gpio; /* might not be set */ + int irq; + struct input_dev *pwr_but; }; static inline struct tps65217 *dev_to_tps65217(struct device *dev) diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h new file mode 100644 index 0000000..9bb77d3 --- /dev/null +++ b/include/linux/nvmem-consumer.h @@ -0,0 +1,157 @@ +/* + * nvmem framework consumer. + * + * Copyright (C) 2015 Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_NVMEM_CONSUMER_H +#define _LINUX_NVMEM_CONSUMER_H + +struct device; +struct device_node; +/* consumer cookie */ +struct nvmem_cell; +struct nvmem_device; + +struct nvmem_cell_info { + const char *name; + unsigned int offset; + unsigned int bytes; + unsigned int bit_offset; + unsigned int nbits; +}; + +#if IS_ENABLED(CONFIG_NVMEM) + +/* Cell based interface */ +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len); + +/* direct nvmem device read/write interface */ +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +#else + +static inline struct nvmem_cell *nvmem_cell_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void devm_nvmem_cell_put(struct device *dev, + struct nvmem_cell *cell) +{ + +} +static inline void nvmem_cell_put(struct nvmem_cell *cell) +{ +} + +static inline char *nvmem_cell_read(struct nvmem_cell *cell, size_t *len) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int nvmem_cell_write(struct nvmem_cell *cell, + const char *buf, size_t len) +{ + return -ENOSYS; +} + +static inline struct nvmem_device *nvmem_device_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void nvmem_device_put(struct nvmem_device *nvmem) +{ +} + +static inline void devm_nvmem_device_put(struct device *dev, + struct nvmem_device *nvmem) +{ +} + +static inline ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_read(struct nvmem_device *nvmem, + unsigned int offset, size_t bytes, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_write(struct nvmem_device *nvmem, + unsigned int offset, size_t bytes, + void *buf) +{ + return -ENOSYS; +} +#endif /* CONFIG_NVMEM */ + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name); +struct nvmem_device *of_nvmem_device_get(struct device_node *np, + const char *name); +#else +static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_device *of_nvmem_device_get(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} +#endif /* CONFIG_NVMEM && CONFIG_OF */ + +#endif /* ifndef _LINUX_NVMEM_CONSUMER_H */ diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h new file mode 100644 index 0000000..de9a61f --- /dev/null +++ b/include/linux/nvmem-provider.h @@ -0,0 +1,48 @@ +/* + * nvmem framework provider. + * + * Copyright (C) 2015 Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_NVMEM_PROVIDER_H +#define _LINUX_NVMEM_PROVIDER_H + +struct nvmem_device; +struct nvmem_cell_info; + +struct nvmem_config { + struct device *dev; + const char *name; + int id; + struct module *owner; + const struct nvmem_cell_info *cells; + int ncells; + bool read_only; + u16 perm; /* visibility in sysfs */ +}; + +#if IS_ENABLED(CONFIG_NVMEM) + +struct nvmem_device *nvmem_register(const struct nvmem_config *cfg); +int nvmem_unregister(struct nvmem_device *nvmem); + +#else + +static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int nvmem_unregister(struct nvmem_device *nvmem) +{ + return -ENOSYS; +} + +#endif /* CONFIG_NVMEM */ + +#endif /* ifndef _LINUX_NVMEM_PROVIDER_H */ diff --git a/include/linux/of.h b/include/linux/of.h index 8135d50..6c6967e 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -1031,6 +1031,27 @@ static inline int of_changeset_update_property(struct of_changeset *ocs, { return of_changeset_action(ocs, OF_RECONFIG_UPDATE_PROPERTY, np, prop); } + +struct device_node *of_changeset_create_device_nodev( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, va_list vargs); +__printf(3, 4) struct device_node *of_changeset_create_device_node( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, ...); +int of_changeset_add_property_copy(struct of_changeset *ocs, + struct device_node *np, const char *name, + const void *value, int length); +int of_changeset_add_property_string(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *str); +__printf(4, 5) int of_changeset_add_property_stringf(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *fmt, ...); +int of_changeset_add_property_string_list(struct of_changeset *ocs, + struct device_node *np, const char *name, const char **strs, int count); +int of_changeset_add_property_u32(struct of_changeset *ocs, + struct device_node *np, const char *name, u32 val); +int of_changeset_add_property_bool(struct of_changeset *ocs, + struct device_node *np, const char *name); + #else /* CONFIG_OF_DYNAMIC */ static inline int of_reconfig_notifier_register(struct notifier_block *nb) { @@ -1050,6 +1071,58 @@ static inline int of_reconfig_get_state_change(unsigned long action, { return -EINVAL; } + +static inline int of_changeset_create_device_node(struct of_changeset *ocs, + struct device_node *parent, const char *fmt, ...) +{ + return -EINVAL; +} + +int of_changeset_add_property_copy(struct of_changeset *ocs, + struct device_node *np, const char *name, + const void *value, int length) +{ + return -EINVAL; +} + +int of_changeset_add_property_string(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *str) +{ + return -EINVAL; +} + +static inline struct device_node *of_changeset_create_device_nodev( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, va_list vargs) +{ + return ERR_PTR(-EINVAL); +} + +static inline __printf(4, 5) struct device_node * + of_changeset_add_property_stringf( + struct of_changeset *ocs, struct device_node *np, + const char *name, const char *fmt, ...) +{ + return ERR_PTR(-EINVAL); +} + +int of_changeset_add_property_string_list(struct of_changeset *ocs, + struct device_node *np, const char *name, const char **strs, int count) +{ + return -EINVAL; +} + +int of_changeset_add_property_u32(struct of_changeset *ocs, + struct device_node *np, const char *name, u32 val) +{ + return -EINVAL; +} + +int of_changeset_add_property_bool(struct of_changeset *ocs, + struct device_node *np, const char *name) +{ + return -EINVAL; +} #endif /* CONFIG_OF_DYNAMIC */ /* CONFIG_OF_RESOLVE api */ @@ -1077,6 +1150,10 @@ int of_overlay_create(struct device_node *tree); int of_overlay_destroy(int id); int of_overlay_destroy_all(void); +int of_overlay_create_indirect(struct device_node *tree, const char *id); +int of_overlay_create_target_root(struct device_node *tree, + struct device_node *target_root); + #else static inline int of_overlay_create(struct device_node *tree) @@ -1094,6 +1171,18 @@ static inline int of_overlay_destroy_all(void) return -ENOTSUPP; } +static inline int of_overlay_create_indirect(struct device_node *tree, + const char *id) +{ + return -ENOTSUPP; +} + +static inline int of_overlay_create_target_root(struct device_node *tree, + struct device_node *target_root) +{ + return -ENOTSUPP; +} + #endif #endif /* _LINUX_OF_H */ diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index c100456..898db7e 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -9,11 +9,13 @@ #define MCSPI_PINDIR_D0_IN_D1_OUT 0 #define MCSPI_PINDIR_D0_OUT_D1_IN 1 +#define MCSPI_PIO_MODE 1 struct omap2_mcspi_platform_config { unsigned short num_cs; unsigned int regs_offset; unsigned int pin_dir:1; + unsigned int pio_mode:1; }; struct omap2_mcspi_dev_attr { diff --git a/include/linux/platform_data/wkup_m3.h b/include/linux/platform_data/wkup_m3.h new file mode 100644 index 0000000..3f1d77e --- /dev/null +++ b/include/linux/platform_data/wkup_m3.h @@ -0,0 +1,30 @@ +/* + * TI Wakeup M3 remote processor platform data + * + * Copyright (C) 2014-2015 Texas Instruments, Inc. + * + * Dave Gerlach + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_PLATFORM_DATA_WKUP_M3_H +#define _LINUX_PLATFORM_DATA_WKUP_M3_H + +struct platform_device; + +struct wkup_m3_platform_data { + const char *reset_name; + + int (*assert_reset)(struct platform_device *pdev, const char *name); + int (*deassert_reset)(struct platform_device *pdev, const char *name); +}; + +#endif /* _LINUX_PLATFORM_DATA_WKUP_M3_H */ diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 116655d..59c55ea 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -433,6 +433,8 @@ int regmap_update_bits_check_async(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change); int regmap_get_val_bytes(struct regmap *map); +int regmap_get_max_register(struct regmap *map); +int regmap_get_reg_stride(struct regmap *map); int regmap_async_complete(struct regmap *map); bool regmap_can_raw_write(struct regmap *map); @@ -676,6 +678,18 @@ static inline int regmap_get_val_bytes(struct regmap *map) return -EINVAL; } +static inline int regmap_get_max_register(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_get_reg_stride(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regcache_sync(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 78b8a9b..9c4e138 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -36,11 +36,11 @@ #define REMOTEPROC_H #include -#include #include #include #include #include +#include /** * struct resource_table - firmware resource table header @@ -330,11 +330,13 @@ struct rproc; * @start: power on the device and boot it * @stop: power off the device * @kick: kick a virtqueue (virtqueue id given as a parameter) + * @da_to_va: optional platform hook to perform address translations */ struct rproc_ops { int (*start)(struct rproc *rproc); int (*stop)(struct rproc *rproc); void (*kick)(struct rproc *rproc, int vqid); + void * (*da_to_va)(struct rproc *rproc, u64 da, int len); }; /** @@ -375,7 +377,7 @@ enum rproc_crash_type { /** * struct rproc - represents a physical remote processor device - * @node: klist node of this rproc object + * @node: list node of this rproc object * @domain: iommu domain * @name: human readable name of the rproc * @firmware: name of firmware file to be loaded @@ -407,7 +409,7 @@ enum rproc_crash_type { * @has_iommu: flag to indicate if remote processor is behind an MMU */ struct rproc { - struct klist_node node; + struct list_head node; struct iommu_domain *domain; const char *name; const char *firmware; @@ -481,6 +483,7 @@ struct rproc_vdev { u32 rsc_offset; }; +struct rproc *rproc_get_by_phandle(phandle phandle); struct rproc *rproc_alloc(struct device *dev, const char *name, const struct rproc_ops *ops, const char *firmware, int len); diff --git a/lib/vsprintf.c b/lib/vsprintf.c index da39c60..10f44aa 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -30,6 +30,7 @@ #include #include #include +#include #include /* for PAGE_SIZE */ #include /* for dereference_function_descriptor() */ @@ -1360,6 +1361,141 @@ char *clock(char *buf, char *end, struct clk *clk, struct printf_spec spec, } } +/* helper method for calculating extends on first pass and filling in later */ +static noinline_for_stack +void append_str(const char *str, int pass, int *lenp, char **bufp, char *end) +{ + int len; + + len = strlen(str); + if (pass == 1) + *lenp += len; + else { + if (len > (end - *bufp)) + len = end - *bufp; + memcpy(*bufp, str, len); + *bufp += len; + } +} + +static noinline_for_stack +char *device_node_string(char *buf, char *end, struct device_node *dn, + struct printf_spec spec, const char *fmt) +{ + char tbuf[sizeof("xxxxxxxxxx") + 1]; + const char *fmtp, *p; + int len, ret, i, j, pass; + char c; + + if (!IS_ENABLED(CONFIG_OF)) { + /* if OF is not enabled just print the pointer */ + spec.flags |= SMALL; + if (spec.field_width == -1) { + spec.field_width = 2 * sizeof(void *); + spec.flags |= ZEROPAD; + } + spec.base = 16; + return number(buf, end, (unsigned long) dn, spec); + } + + if ((unsigned long)dn < PAGE_SIZE) + return string(buf, end, "(null)", spec); + + /* simple case without anything any more format specifiers */ + if (fmt[1] == '\0' || isspace(fmt[1])) + fmt = "Of"; + + len = 0; + + /* two passes; the first calculates length, the second fills in */ + for (pass = 1; pass <= 2; pass++) { + if (pass == 2 && !(spec.flags & LEFT)) { + /* padding */ + while (len < spec.field_width--) { + if (buf < end) + *buf = ' '; + ++buf; + } + } + + for (fmtp = fmt + 1, j = 0; (c = *fmtp++) != '\0'; ) { + + /* validate option */ + if (c != 'f' && c != 'n' && c != 'p' && c != 'P' && + c != 'F' && c != 'c' && c != 'C' && c != 'r') + continue; + + /* handle separator */ + if (j++ > 0) + append_str("|", pass, &len, &buf, end); + + switch (c) { + case 'f': /* full_name */ + append_str(of_node_full_name(dn), pass, &len, + &buf, end); + break; + case 'n': /* name */ + append_str(dn->name, pass, &len, &buf, end); + break; + case 'p': /* phandle */ + snprintf(tbuf, sizeof(tbuf), "%u", + (unsigned int)dn->phandle); + append_str(tbuf, pass, &len, &buf, end); + break; + case 'P': /* path-spec */ + append_str(dn->name, pass, &len, &buf, end); + /* need to tack on the @ postfix */ + p = strchr(of_node_full_name(dn), '@'); + if (p) + append_str(p, pass, &len, &buf, end); + break; + case 'F': /* flags */ + snprintf(tbuf, sizeof(tbuf), "%c%c%c%c", + of_node_check_flag(dn, OF_DYNAMIC) ? + 'D' : '-', + of_node_check_flag(dn, OF_DETACHED) ? + 'd' : '-', + of_node_check_flag(dn, OF_POPULATED) ? + 'P' : '-', + of_node_check_flag(dn, + OF_POPULATED_BUS) ? 'B' : '-'); + append_str(tbuf, pass, &len, &buf, end); + break; + case 'c': /* major compatible string */ + ret = of_property_read_string(dn, "compatible", + &p); + if (ret == 0) + append_str(p, pass, &len, &buf, end); + break; + case 'C': /* full compatible string */ + i = 0; + while (of_property_read_string_index(dn, + "compatible", i, &p) == 0) { + append_str(i == 0 ? "\"" : "\",\"", + pass, &len, &buf, end); + append_str(p, pass, &len, &buf, end); + i++; + } + if (i > 0) + append_str("\"", pass, &len, &buf, end); + break; + case 'r': /* node reference count */ + snprintf(tbuf, sizeof(tbuf), "%u", + atomic_read(&dn->kobj.kref.refcount)); + append_str(tbuf, pass, &len, &buf, end); + break; + default: + break; + } + } + } + /* finish up */ + while (buf < end && len < spec.field_width--) + *buf++ = ' '; + + return buf; +} + int kptr_restrict __read_mostly; /* @@ -1447,6 +1583,16 @@ int kptr_restrict __read_mostly; * - 'Cn' For a clock, it prints the name (Common Clock Framework) or address * (legacy clock framework) of the clock * - 'Cr' For a clock, it prints the current rate of the clock + * - 'O[fnpPcCFr]' For an DT device node + * Without any optional arguments prints the full_name + * f device node full_name + * n device node name + * p device node phandle + * P device node path spec (name + @unit) + * F device node flags + * c major compatible string + * C full compatible string + * r node reference count * * Note: The difference between 'S' and 'F' is that on ia64 and ppc64 * function pointers are really function descriptors, which contain a @@ -1597,6 +1743,8 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr, return dentry_name(buf, end, ((const struct file *)ptr)->f_path.dentry, spec, fmt); + case 'O': + return device_node_string(buf, end, ptr, spec, fmt); } spec.flags |= SMALL; if (spec.field_width == -1) { diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c index ee96a25..c0326d1 100644 --- a/scripts/dtc/checks.c +++ b/scripts/dtc/checks.c @@ -53,7 +53,7 @@ struct check { void *data; bool warn, error; enum checkstatus status; - int inprogress; + bool inprogress; int num_prereqs; struct check **prereq; }; @@ -113,6 +113,7 @@ static inline void check_msg(struct check *c, const char *fmt, ...) vfprintf(stderr, fmt, ap); fprintf(stderr, "\n"); } + va_end(ap); } #define FAIL(c, ...) \ @@ -141,9 +142,9 @@ static void check_nodes_props(struct check *c, struct node *dt, struct node *nod check_nodes_props(c, dt, child); } -static int run_check(struct check *c, struct node *dt) +static bool run_check(struct check *c, struct node *dt) { - int error = 0; + bool error = false; int i; assert(!c->inprogress); @@ -151,11 +152,11 @@ static int run_check(struct check *c, struct node *dt) if (c->status != UNCHECKED) goto out; - c->inprogress = 1; + c->inprogress = true; for (i = 0; i < c->num_prereqs; i++) { struct check *prq = c->prereq[i]; - error |= run_check(prq, dt); + error = error || run_check(prq, dt); if (prq->status != PASSED) { c->status = PREREQ; check_msg(c, "Failed prerequisite '%s'", @@ -177,9 +178,9 @@ static int run_check(struct check *c, struct node *dt) TRACE(c, "\tCompleted, status %d", c->status); out: - c->inprogress = 0; + c->inprogress = false; if ((c->status != PASSED) && (c->error)) - error = 1; + error = true; return error; } @@ -457,6 +458,8 @@ static void fixup_phandle_references(struct check *c, struct node *dt, struct node *node, struct property *prop) { struct marker *m = prop->val.markers; + struct fixup *f, **fp; + struct fixup_entry *fe, **fep; struct node *refnode; cell_t phandle; @@ -465,14 +468,73 @@ static void fixup_phandle_references(struct check *c, struct node *dt, refnode = get_node_by_ref(dt, m->ref); if (! refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); + if (!dt->is_plugin) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + /* allocate fixup entry */ + fe = xmalloc(sizeof(*fe)); + + fe->node = node; + fe->prop = prop; + fe->offset = m->offset; + fe->next = NULL; + + /* search for an already existing fixup */ + for_each_fixup(dt, f) + if (strcmp(f->ref, m->ref) == 0) + break; + + /* no fixup found, add new */ + if (f == NULL) { + f = xmalloc(sizeof(*f)); + f->ref = m->ref; + f->entries = NULL; + f->next = NULL; + + /* add it to the tree */ + fp = &dt->fixups; + while (*fp) + fp = &(*fp)->next; + *fp = f; + } + + /* and now append fixup entry */ + fep = &f->entries; + while (*fep) + fep = &(*fep)->next; + *fep = fe; + + /* mark the entry as unresolved */ + *((cell_t *)(prop->val.val + m->offset)) = + cpu_to_fdt32(0xdeadbeef); continue; } + /* if it's a local reference, we need to record it */ + if (symbol_fixup_support) { + + /* allocate a new local fixup entry */ + fe = xmalloc(sizeof(*fe)); + + fe->node = node; + fe->prop = prop; + fe->offset = m->offset; + fe->next = NULL; + + /* append it to the local fixups */ + fep = &dt->local_fixups; + while (*fep) + fep = &(*fep)->next; + *fep = fe; + } + phandle = get_node_phandle(dt, refnode); *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); } + } ERROR(phandle_references, NULL, NULL, fixup_phandle_references, NULL, &duplicate_node_names, &explicit_phandles); @@ -559,7 +621,7 @@ static void check_reg_format(struct check *c, struct node *dt, size_cells = node_size_cells(node->parent); entrylen = (addr_cells + size_cells) * sizeof(cell_t); - if ((prop->val.len % entrylen) != 0) + if (!entrylen || (prop->val.len % entrylen) != 0) FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " "(#address-cells == %d, #size-cells == %d)", node->fullpath, prop->val.len, addr_cells, size_cells); @@ -624,11 +686,11 @@ static void check_avoid_default_addr_size(struct check *c, struct node *dt, if (!reg && !ranges) return; - if ((node->parent->addr_cells == -1)) + if (node->parent->addr_cells == -1) FAIL(c, "Relying on default #address-cells value for %s", node->fullpath); - if ((node->parent->size_cells == -1)) + if (node->parent->size_cells == -1) FAIL(c, "Relying on default #size-cells value for %s", node->fullpath); } @@ -651,6 +713,45 @@ static void check_obsolete_chosen_interrupt_controller(struct check *c, } TREE_WARNING(obsolete_chosen_interrupt_controller, NULL); +static void check_auto_label_phandles(struct check *c, struct node *dt, + struct node *node) +{ + struct label *l; + struct symbol *s, **sp; + int has_label; + + if (!symbol_fixup_support) + return; + + has_label = 0; + for_each_label(node->labels, l) { + has_label = 1; + break; + } + + if (!has_label) + return; + + /* force allocation of a phandle for this node */ + (void)get_node_phandle(dt, node); + + /* add the symbol */ + for_each_label(node->labels, l) { + + s = xmalloc(sizeof(*s)); + s->label = l; + s->node = node; + s->next = NULL; + + /* add it to the symbols list */ + sp = &dt->symbols; + while (*sp) + sp = &((*sp)->next); + *sp = s; + } +} +NODE_WARNING(auto_label_phandles, NULL); + static struct check *check_table[] = { &duplicate_node_names, &duplicate_property_names, &node_name_chars, &node_name_format, &property_name_chars, @@ -669,6 +770,8 @@ static struct check *check_table[] = { &avoid_default_addr_size, &obsolete_chosen_interrupt_controller, + &auto_label_phandles, + &always_fail, }; @@ -706,15 +809,15 @@ static void disable_warning_error(struct check *c, bool warn, bool error) c->error = c->error && !error; } -void parse_checks_option(bool warn, bool error, const char *optarg) +void parse_checks_option(bool warn, bool error, const char *arg) { int i; - const char *name = optarg; + const char *name = arg; bool enable = true; - if ((strncmp(optarg, "no-", 3) == 0) - || (strncmp(optarg, "no_", 3) == 0)) { - name = optarg + 3; + if ((strncmp(arg, "no-", 3) == 0) + || (strncmp(arg, "no_", 3) == 0)) { + name = arg + 3; enable = false; } @@ -733,7 +836,7 @@ void parse_checks_option(bool warn, bool error, const char *optarg) die("Unrecognized check name \"%s\"\n", name); } -void process_checks(int force, struct boot_info *bi) +void process_checks(bool force, struct boot_info *bi) { struct node *dt = bi->dt; int i; diff --git a/scripts/dtc/data.c b/scripts/dtc/data.c index 4a40c5b..8cae237 100644 --- a/scripts/dtc/data.c +++ b/scripts/dtc/data.c @@ -74,7 +74,7 @@ struct data data_copy_escape_string(const char *s, int len) struct data d; char *q; - d = data_grow_for(empty_data, strlen(s)+1); + d = data_grow_for(empty_data, len + 1); q = d.val; while (i < len) { @@ -250,20 +250,20 @@ struct data data_add_marker(struct data d, enum markertype type, char *ref) return data_append_markers(d, m); } -int data_is_one_string(struct data d) +bool data_is_one_string(struct data d) { int i; int len = d.len; if (len == 0) - return 0; + return false; for (i = 0; i < len-1; i++) if (d.val[i] == '\0') - return 0; + return false; if (d.val[len-1] != '\0') - return 0; + return false; - return 1; + return true; } diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l index 3b41bfc..dd44ba2 100644 --- a/scripts/dtc/dtc-lexer.l +++ b/scripts/dtc/dtc-lexer.l @@ -20,7 +20,6 @@ %option noyywrap nounput noinput never-interactive -%x INCLUDE %x BYTESTRING %x PROPNODENAME %s V1 @@ -40,6 +39,7 @@ LINECOMMENT "//".*\n #include "dtc-parser.tab.h" YYLTYPE yylloc; +extern bool treesource_error; /* CAUTION: this will stop working if we ever use yyless() or yyunput() */ #define YY_USER_ACTION \ @@ -61,7 +61,8 @@ static int dts_version = 1; BEGIN(V1); \ static void push_input_file(const char *filename); -static int pop_input_file(void); +static bool pop_input_file(void); +static void lexical_error(const char *fmt, ...); %} %% @@ -75,11 +76,11 @@ static int pop_input_file(void); char *line, *tmp, *fn; /* skip text before line # */ line = yytext; - while (!isdigit(*line)) + while (!isdigit((unsigned char)*line)) line++; /* skip digits in line # */ tmp = line; - while (!isspace(*tmp)) + while (!isspace((unsigned char)*tmp)) tmp++; /* "NULL"-terminate line # */ *tmp = '\0'; @@ -112,6 +113,11 @@ static int pop_input_file(void); return DT_V1; } +<*>"/plugin/" { + DPRINT("Keyword: /plugin/\n"); + return DT_PLUGIN; + } + <*>"/memreserve/" { DPRINT("Keyword: /memreserve/\n"); BEGIN_DEFAULT(); @@ -146,15 +152,42 @@ static int pop_input_file(void); } ([0-9]+|0[xX][0-9a-fA-F]+)(U|L|UL|LL|ULL)? { - yylval.literal = xstrdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); + char *e; + DPRINT("Integer Literal: '%s'\n", yytext); + + errno = 0; + yylval.integer = strtoull(yytext, &e, 0); + + assert(!(*e) || !e[strspn(e, "UL")]); + + if (errno == ERANGE) + lexical_error("Integer literal '%s' out of range", + yytext); + else + /* ERANGE is the only strtoull error triggerable + * by strings matching the pattern */ + assert(errno == 0); return DT_LITERAL; } <*>{CHAR_LITERAL} { - yytext[yyleng-1] = '\0'; - yylval.literal = xstrdup(yytext+1); - DPRINT("Character literal: %s\n", yylval.literal); + struct data d; + DPRINT("Character literal: %s\n", yytext); + + d = data_copy_escape_string(yytext+1, yyleng-2); + if (d.len == 1) { + lexical_error("Empty character literal"); + yylval.integer = 0; + return DT_CHAR_LITERAL; + } + + yylval.integer = (unsigned char)d.val[0]; + + if (d.len > 2) + lexical_error("Character literal has %d" + " characters instead of 1", + d.len - 1); + return DT_CHAR_LITERAL; } @@ -164,7 +197,7 @@ static int pop_input_file(void); return DT_REF; } -<*>"&{/"{PATHCHAR}+\} { /* new-style path reference */ +<*>"&{/"{PATHCHAR}*\} { /* new-style path reference */ yytext[yyleng-1] = '\0'; DPRINT("Ref: %s\n", yytext+2); yylval.labelref = xstrdup(yytext+2); @@ -238,13 +271,24 @@ static void push_input_file(const char *filename) } -static int pop_input_file(void) +static bool pop_input_file(void) { if (srcfile_pop() == 0) - return 0; + return false; yypop_buffer_state(); yyin = current_srcfile->f; - return 1; + return true; +} + +static void lexical_error(const char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + srcpos_verror(&yylloc, "Lexical error", fmt, ap); + va_end(ap); + + treesource_error = true; } diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped index 2d30f41..705c47d 100644 --- a/scripts/dtc/dtc-lexer.lex.c_shipped +++ b/scripts/dtc/dtc-lexer.lex.c_shipped @@ -9,7 +9,7 @@ #define FLEX_SCANNER #define YY_FLEX_MAJOR_VERSION 2 #define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 35 +#define YY_FLEX_SUBMINOR_VERSION 39 #if YY_FLEX_SUBMINOR_VERSION > 0 #define FLEX_BETA #endif @@ -162,7 +162,12 @@ typedef unsigned int flex_uint32_t; typedef struct yy_buffer_state *YY_BUFFER_STATE; #endif -extern int yyleng; +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +extern yy_size_t yyleng; extern FILE *yyin, *yyout; @@ -171,6 +176,7 @@ extern FILE *yyin, *yyout; #define EOB_ACT_LAST_MATCH 2 #define YY_LESS_LINENO(n) + #define YY_LINENO_REWIND_TO(ptr) /* Return all but the first "n" matched characters back to the input stream. */ #define yyless(n) \ @@ -188,11 +194,6 @@ extern FILE *yyin, *yyout; #define unput(c) yyunput( c, (yytext_ptr) ) -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - #ifndef YY_STRUCT_YY_BUFFER_STATE #define YY_STRUCT_YY_BUFFER_STATE struct yy_buffer_state @@ -210,7 +211,7 @@ struct yy_buffer_state /* Number of characters read into yy_ch_buf, not including EOB * characters. */ - int yy_n_chars; + yy_size_t yy_n_chars; /* Whether we "own" the buffer - i.e., we know we created it, * and can realloc() it to grow it, and should free() it to @@ -280,8 +281,8 @@ static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ /* yy_hold_char holds the character lost when yytext is formed. */ static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int yyleng; +static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ +yy_size_t yyleng; /* Points to current character in buffer. */ static char *yy_c_buf_p = (char *) 0; @@ -309,7 +310,7 @@ static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); void *yyalloc (yy_size_t ); void *yyrealloc (void *,yy_size_t ); @@ -341,7 +342,7 @@ void yyfree (void * ); /* Begin user sect3 */ -#define yywrap(n) 1 +#define yywrap() 1 #define YY_SKIP_YYWRAP typedef unsigned char YY_CHAR; @@ -372,8 +373,8 @@ static void yy_fatal_error (yyconst char msg[] ); *yy_cp = '\0'; \ (yy_c_buf_p) = yy_cp; -#define YY_NUM_RULES 30 -#define YY_END_OF_BUFFER 31 +#define YY_NUM_RULES 31 +#define YY_END_OF_BUFFER 32 /* This struct is not used in this scanner, but its presence is necessary. */ struct yy_trans_info @@ -381,25 +382,26 @@ struct yy_trans_info flex_int32_t yy_verify; flex_int32_t yy_nxt; }; -static yyconst flex_int16_t yy_accept[161] = +static yyconst flex_int16_t yy_accept[166] = { 0, + 0, 0, 0, 0, 0, 0, 0, 0, 32, 30, + 19, 19, 30, 30, 30, 30, 30, 30, 30, 30, + 30, 30, 30, 30, 30, 30, 16, 17, 17, 30, + 17, 11, 11, 19, 27, 0, 3, 0, 28, 13, + 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, + 0, 22, 24, 26, 25, 23, 0, 10, 29, 0, + 0, 0, 15, 15, 17, 17, 17, 11, 11, 11, + 0, 13, 0, 12, 0, 0, 0, 21, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 17, 11, 11, + 11, 0, 14, 20, 0, 0, 0, 0, 0, 0, + + 0, 0, 0, 0, 17, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 17, 7, 0, 0, 0, + 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 4, 18, 0, 0, 5, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 31, 29, 18, 18, 29, 29, 29, 29, 29, 29, - 29, 29, 29, 29, 29, 29, 29, 29, 15, 16, - 16, 29, 16, 10, 10, 18, 26, 0, 3, 0, - 27, 12, 0, 0, 11, 0, 0, 0, 0, 0, - 0, 0, 21, 23, 25, 24, 22, 0, 9, 28, - 0, 0, 0, 14, 14, 16, 16, 16, 10, 10, - 10, 0, 12, 0, 11, 0, 0, 0, 20, 0, - 0, 0, 0, 0, 0, 0, 0, 16, 10, 10, - 10, 0, 19, 0, 0, 0, 0, 0, 0, 0, - - 0, 0, 16, 13, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 16, 6, 0, 0, 0, 0, 0, - 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, - 4, 17, 0, 0, 2, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, - 0, 0, 5, 8, 0, 0, 0, 0, 7, 0 + 0, 0, 1, 0, 0, 0, 0, 6, 9, 0, + 0, 0, 0, 8, 0 } ; static yyconst flex_int32_t yy_ec[256] = @@ -415,9 +417,9 @@ static yyconst flex_int32_t yy_ec[256] = 22, 22, 22, 22, 24, 22, 22, 25, 22, 22, 1, 26, 27, 1, 22, 1, 21, 28, 29, 30, - 31, 21, 22, 22, 32, 22, 22, 33, 34, 35, - 36, 37, 22, 38, 39, 40, 41, 42, 22, 25, - 43, 22, 44, 45, 46, 1, 1, 1, 1, 1, + 31, 21, 32, 22, 33, 22, 22, 34, 35, 36, + 37, 38, 22, 39, 40, 41, 42, 43, 22, 25, + 44, 22, 45, 46, 47, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, @@ -434,163 +436,165 @@ static yyconst flex_int32_t yy_ec[256] = 1, 1, 1, 1, 1 } ; -static yyconst flex_int32_t yy_meta[47] = +static yyconst flex_int32_t yy_meta[48] = { 0, 1, 1, 1, 1, 1, 1, 2, 3, 1, 2, 2, 2, 4, 5, 5, 5, 6, 1, 1, 1, 7, 8, 8, 8, 8, 1, 1, 7, 7, 7, 7, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 3, 1, 1 + 8, 8, 8, 8, 3, 1, 4 } ; -static yyconst flex_int16_t yy_base[175] = +static yyconst flex_int16_t yy_base[180] = { 0, - 0, 385, 378, 40, 41, 383, 72, 382, 34, 44, - 388, 393, 61, 117, 368, 116, 115, 115, 115, 48, - 367, 107, 368, 339, 127, 120, 0, 147, 393, 0, - 127, 0, 133, 156, 168, 153, 393, 125, 393, 380, - 393, 0, 369, 127, 393, 160, 371, 377, 347, 21, - 343, 346, 393, 393, 393, 393, 393, 359, 393, 393, - 183, 343, 339, 393, 356, 0, 183, 340, 187, 348, - 347, 0, 0, 0, 178, 359, 195, 365, 354, 326, - 332, 325, 334, 328, 204, 326, 331, 324, 393, 335, - 150, 311, 343, 342, 315, 322, 340, 179, 313, 207, - - 319, 316, 317, 393, 337, 333, 305, 302, 311, 301, - 310, 190, 338, 337, 393, 307, 322, 301, 305, 277, - 208, 311, 307, 278, 271, 270, 248, 246, 213, 130, - 393, 393, 263, 235, 207, 221, 218, 229, 213, 213, - 206, 234, 218, 210, 208, 193, 219, 393, 223, 204, - 176, 157, 393, 393, 120, 106, 97, 119, 393, 393, - 245, 251, 259, 263, 267, 273, 280, 284, 292, 300, - 304, 310, 318, 326 + 0, 393, 35, 392, 66, 391, 38, 107, 397, 401, + 55, 113, 377, 112, 111, 111, 114, 42, 376, 106, + 377, 347, 126, 120, 0, 147, 401, 0, 124, 0, + 137, 158, 170, 163, 401, 153, 401, 389, 401, 0, + 378, 120, 401, 131, 380, 386, 355, 139, 351, 355, + 351, 401, 401, 401, 401, 401, 367, 401, 401, 185, + 350, 346, 401, 364, 0, 185, 347, 189, 356, 355, + 0, 0, 330, 180, 366, 141, 372, 361, 332, 338, + 331, 341, 334, 326, 205, 331, 337, 329, 401, 341, + 167, 316, 401, 349, 348, 320, 328, 346, 180, 318, + + 324, 209, 324, 320, 322, 342, 338, 309, 306, 315, + 305, 315, 312, 192, 342, 341, 401, 293, 306, 282, + 268, 252, 255, 203, 285, 282, 272, 268, 252, 233, + 232, 239, 208, 107, 401, 401, 238, 211, 401, 211, + 212, 208, 228, 203, 215, 207, 233, 222, 212, 211, + 203, 227, 401, 237, 225, 204, 185, 401, 401, 149, + 128, 88, 42, 401, 401, 253, 259, 267, 271, 275, + 281, 288, 292, 300, 308, 312, 318, 326, 334 } ; -static yyconst flex_int16_t yy_def[175] = +static yyconst flex_int16_t yy_def[180] = { 0, - 160, 1, 1, 1, 1, 5, 160, 7, 1, 1, - 160, 160, 160, 160, 160, 161, 162, 163, 160, 160, - 160, 160, 164, 160, 160, 160, 165, 164, 160, 166, - 167, 166, 166, 160, 160, 160, 160, 161, 160, 161, - 160, 168, 160, 163, 160, 163, 169, 170, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 164, 160, 160, - 160, 160, 160, 160, 164, 166, 167, 166, 160, 160, - 160, 171, 168, 172, 163, 169, 169, 170, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 166, 160, 160, - 171, 172, 160, 160, 160, 160, 160, 160, 160, 160, - - 160, 160, 166, 160, 160, 160, 160, 160, 160, 160, - 160, 173, 160, 166, 160, 160, 160, 160, 160, 160, - 173, 160, 173, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 174, 160, 160, 160, 174, 160, 174, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 0, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160 + 165, 1, 1, 3, 165, 5, 1, 1, 165, 165, + 165, 165, 165, 166, 167, 168, 165, 165, 165, 165, + 169, 165, 165, 165, 170, 169, 165, 171, 172, 171, + 171, 165, 165, 165, 165, 166, 165, 166, 165, 173, + 165, 168, 165, 168, 174, 175, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 169, 165, 165, 165, + 165, 165, 165, 169, 171, 172, 171, 165, 165, 165, + 176, 173, 177, 168, 174, 174, 175, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 171, 165, 165, + 176, 177, 165, 165, 165, 165, 165, 165, 165, 165, + + 165, 165, 165, 165, 171, 165, 165, 165, 165, 165, + 165, 165, 165, 178, 165, 171, 165, 165, 165, 165, + 165, 165, 165, 178, 165, 178, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 179, 165, 165, + 165, 179, 165, 179, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 0, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165 } ; -static yyconst flex_int16_t yy_nxt[440] = +static yyconst flex_int16_t yy_nxt[449] = { 0, - 12, 13, 14, 13, 15, 16, 12, 17, 18, 12, - 12, 12, 19, 12, 12, 12, 12, 20, 21, 22, - 23, 23, 23, 23, 23, 12, 12, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 12, 24, 12, 25, 34, 35, 35, - 25, 81, 26, 26, 27, 27, 27, 34, 35, 35, - 82, 28, 36, 36, 36, 53, 54, 29, 28, 28, - 28, 28, 12, 13, 14, 13, 15, 16, 30, 17, - 18, 30, 30, 30, 26, 30, 30, 30, 12, 20, - 21, 22, 31, 31, 31, 31, 31, 32, 12, 31, - - 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, - 31, 31, 31, 31, 31, 12, 24, 12, 36, 36, - 36, 39, 41, 45, 47, 56, 57, 48, 61, 47, - 39, 159, 48, 66, 61, 45, 66, 66, 66, 158, - 46, 40, 49, 59, 50, 157, 51, 49, 52, 50, - 40, 63, 46, 52, 36, 36, 36, 156, 43, 62, - 65, 65, 65, 59, 136, 68, 137, 65, 75, 69, - 69, 69, 70, 71, 65, 65, 65, 65, 70, 71, - 72, 69, 69, 69, 61, 46, 45, 155, 154, 66, - 70, 71, 66, 66, 66, 122, 85, 85, 85, 59, - - 69, 69, 69, 46, 77, 100, 109, 93, 100, 70, - 71, 110, 112, 122, 129, 123, 153, 85, 85, 85, - 135, 135, 135, 148, 148, 160, 135, 135, 135, 152, - 142, 142, 142, 123, 143, 142, 142, 142, 151, 143, - 150, 146, 145, 149, 149, 38, 38, 38, 38, 38, - 38, 38, 38, 42, 144, 141, 140, 42, 42, 44, - 44, 44, 44, 44, 44, 44, 44, 58, 58, 58, - 58, 64, 139, 64, 66, 138, 134, 66, 133, 66, - 66, 67, 132, 131, 67, 67, 67, 67, 73, 130, - 73, 73, 76, 76, 76, 76, 76, 76, 76, 76, - - 78, 78, 78, 78, 78, 78, 78, 78, 91, 160, - 91, 92, 129, 92, 92, 128, 92, 92, 121, 121, - 121, 121, 121, 121, 121, 121, 147, 147, 147, 147, - 147, 147, 147, 147, 127, 126, 125, 124, 61, 61, - 120, 119, 118, 117, 116, 115, 47, 114, 110, 113, - 111, 108, 107, 106, 48, 105, 104, 89, 103, 102, - 101, 99, 98, 97, 96, 95, 94, 79, 77, 90, - 89, 88, 59, 87, 86, 59, 84, 83, 80, 79, - 77, 74, 160, 60, 59, 55, 37, 160, 33, 25, - 26, 25, 11, 160, 160, 160, 160, 160, 160, 160, - - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160 + 10, 11, 12, 11, 13, 14, 10, 15, 16, 10, + 10, 10, 17, 10, 10, 10, 10, 18, 19, 20, + 21, 21, 21, 21, 21, 10, 10, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 10, 22, 10, 24, 25, 25, + 25, 32, 33, 33, 164, 26, 34, 34, 34, 52, + 53, 27, 26, 26, 26, 26, 10, 11, 12, 11, + 13, 14, 28, 15, 16, 28, 28, 28, 24, 28, + 28, 28, 10, 18, 19, 20, 29, 29, 29, 29, + 29, 30, 10, 29, 29, 29, 29, 29, 29, 29, + + 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, + 10, 22, 10, 23, 34, 34, 34, 37, 39, 43, + 32, 33, 33, 45, 55, 56, 46, 60, 43, 45, + 65, 163, 46, 65, 65, 65, 44, 38, 60, 74, + 58, 47, 141, 48, 142, 44, 49, 47, 50, 48, + 76, 51, 62, 94, 50, 41, 44, 51, 37, 61, + 64, 64, 64, 58, 34, 34, 34, 64, 162, 80, + 67, 68, 68, 68, 64, 64, 64, 64, 38, 81, + 69, 70, 71, 68, 68, 68, 60, 161, 43, 69, + 70, 65, 69, 70, 65, 65, 65, 125, 85, 85, + + 85, 58, 68, 68, 68, 44, 102, 110, 125, 133, + 102, 69, 70, 111, 114, 160, 159, 126, 85, 85, + 85, 140, 140, 140, 140, 140, 140, 153, 126, 147, + 147, 147, 153, 148, 147, 147, 147, 158, 148, 165, + 157, 156, 155, 151, 150, 149, 146, 154, 145, 144, + 143, 139, 154, 36, 36, 36, 36, 36, 36, 36, + 36, 40, 138, 137, 136, 40, 40, 42, 42, 42, + 42, 42, 42, 42, 42, 57, 57, 57, 57, 63, + 135, 63, 65, 134, 165, 65, 133, 65, 65, 66, + 132, 131, 66, 66, 66, 66, 72, 130, 72, 72, + + 75, 75, 75, 75, 75, 75, 75, 75, 77, 77, + 77, 77, 77, 77, 77, 77, 91, 129, 91, 92, + 128, 92, 92, 127, 92, 92, 124, 124, 124, 124, + 124, 124, 124, 124, 152, 152, 152, 152, 152, 152, + 152, 152, 60, 60, 123, 122, 121, 120, 119, 118, + 117, 45, 116, 111, 115, 113, 112, 109, 108, 107, + 46, 106, 93, 89, 105, 104, 103, 101, 100, 99, + 98, 97, 96, 95, 78, 76, 93, 90, 89, 88, + 58, 87, 86, 58, 84, 83, 82, 79, 78, 76, + 73, 165, 59, 58, 54, 35, 165, 31, 23, 23, + + 9, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165 } ; -static yyconst flex_int16_t yy_chk[440] = +static yyconst flex_int16_t yy_chk[449] = { 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 4, 9, 9, 9, - 10, 50, 4, 5, 5, 5, 5, 10, 10, 10, - 50, 5, 13, 13, 13, 20, 20, 5, 5, 5, - 5, 5, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 14, 14, - 14, 16, 17, 18, 19, 22, 22, 19, 25, 26, - 38, 158, 26, 31, 33, 44, 31, 31, 31, 157, - 18, 16, 19, 31, 19, 156, 19, 26, 19, 26, - 38, 26, 44, 26, 36, 36, 36, 155, 17, 25, - 28, 28, 28, 28, 130, 33, 130, 28, 46, 34, - 34, 34, 91, 91, 28, 28, 28, 28, 34, 34, - 34, 35, 35, 35, 61, 46, 75, 152, 151, 67, - 35, 35, 67, 67, 67, 112, 61, 61, 61, 67, - - 69, 69, 69, 75, 77, 85, 98, 77, 100, 69, - 69, 98, 100, 121, 129, 112, 150, 85, 85, 85, - 135, 135, 135, 143, 147, 149, 129, 129, 129, 146, - 138, 138, 138, 121, 138, 142, 142, 142, 145, 142, - 144, 141, 140, 143, 147, 161, 161, 161, 161, 161, - 161, 161, 161, 162, 139, 137, 136, 162, 162, 163, - 163, 163, 163, 163, 163, 163, 163, 164, 164, 164, - 164, 165, 134, 165, 166, 133, 128, 166, 127, 166, - 166, 167, 126, 125, 167, 167, 167, 167, 168, 124, - 168, 168, 169, 169, 169, 169, 169, 169, 169, 169, - - 170, 170, 170, 170, 170, 170, 170, 170, 171, 123, - 171, 172, 122, 172, 172, 120, 172, 172, 173, 173, - 173, 173, 173, 173, 173, 173, 174, 174, 174, 174, - 174, 174, 174, 174, 119, 118, 117, 116, 114, 113, - 111, 110, 109, 108, 107, 106, 105, 103, 102, 101, - 99, 97, 96, 95, 94, 93, 92, 90, 88, 87, - 86, 84, 83, 82, 81, 80, 79, 78, 76, 71, - 70, 68, 65, 63, 62, 58, 52, 51, 49, 48, - 47, 43, 40, 24, 23, 21, 15, 11, 8, 6, - 3, 2, 160, 160, 160, 160, 160, 160, 160, 160, - - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160 + 1, 1, 1, 1, 1, 1, 1, 3, 3, 3, + 3, 7, 7, 7, 163, 3, 11, 11, 11, 18, + 18, 3, 3, 3, 3, 3, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 8, 12, 12, 12, 14, 15, 16, + 8, 8, 8, 17, 20, 20, 17, 23, 42, 24, + 29, 162, 24, 29, 29, 29, 16, 14, 31, 44, + 29, 17, 134, 17, 134, 42, 17, 24, 17, 24, + 76, 17, 24, 76, 24, 15, 44, 24, 36, 23, + 26, 26, 26, 26, 34, 34, 34, 26, 161, 48, + 31, 32, 32, 32, 26, 26, 26, 26, 36, 48, + 32, 32, 32, 33, 33, 33, 60, 160, 74, 91, + 91, 66, 33, 33, 66, 66, 66, 114, 60, 60, + + 60, 66, 68, 68, 68, 74, 85, 99, 124, 133, + 102, 68, 68, 99, 102, 157, 156, 114, 85, 85, + 85, 133, 133, 133, 140, 140, 140, 148, 124, 143, + 143, 143, 152, 143, 147, 147, 147, 155, 147, 154, + 151, 150, 149, 146, 145, 144, 142, 148, 141, 138, + 137, 132, 152, 166, 166, 166, 166, 166, 166, 166, + 166, 167, 131, 130, 129, 167, 167, 168, 168, 168, + 168, 168, 168, 168, 168, 169, 169, 169, 169, 170, + 128, 170, 171, 127, 126, 171, 125, 171, 171, 172, + 123, 122, 172, 172, 172, 172, 173, 121, 173, 173, + + 174, 174, 174, 174, 174, 174, 174, 174, 175, 175, + 175, 175, 175, 175, 175, 175, 176, 120, 176, 177, + 119, 177, 177, 118, 177, 177, 178, 178, 178, 178, + 178, 178, 178, 178, 179, 179, 179, 179, 179, 179, + 179, 179, 116, 115, 113, 112, 111, 110, 109, 108, + 107, 106, 105, 104, 103, 101, 100, 98, 97, 96, + 95, 94, 92, 90, 88, 87, 86, 84, 83, 82, + 81, 80, 79, 78, 77, 75, 73, 70, 69, 67, + 64, 62, 61, 57, 51, 50, 49, 47, 46, 45, + 41, 38, 22, 21, 19, 13, 9, 6, 4, 2, + + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165 } ; static yy_state_type yy_last_accepting_state; @@ -631,13 +635,13 @@ char *yytext; - -#line 38 "dtc-lexer.l" +#line 37 "dtc-lexer.l" #include "dtc.h" #include "srcpos.h" #include "dtc-parser.tab.h" YYLTYPE yylloc; +extern bool treesource_error; /* CAUTION: this will stop working if we ever use yyless() or yyunput() */ #define YY_USER_ACTION \ @@ -659,14 +663,14 @@ static int dts_version = 1; BEGIN(V1); \ static void push_input_file(const char *filename); -static int pop_input_file(void); -#line 664 "dtc-lexer.lex.c" +static bool pop_input_file(void); +static void lexical_error(const char *fmt, ...); +#line 669 "dtc-lexer.lex.c" #define INITIAL 0 -#define INCLUDE 1 -#define BYTESTRING 2 -#define PROPNODENAME 3 -#define V1 4 +#define BYTESTRING 1 +#define PROPNODENAME 2 +#define V1 3 #ifndef YY_NO_UNISTD_H /* Special case for "unistd.h", since it is non-ANSI. We include it way @@ -703,7 +707,7 @@ FILE *yyget_out (void ); void yyset_out (FILE * out_str ); -int yyget_leng (void ); +yy_size_t yyget_leng (void ); char *yyget_text (void ); @@ -852,10 +856,6 @@ YY_DECL register char *yy_cp, *yy_bp; register int yy_act; -#line 67 "dtc-lexer.l" - -#line 858 "dtc-lexer.lex.c" - if ( !(yy_init) ) { (yy_init) = 1; @@ -882,6 +882,11 @@ YY_DECL yy_load_buffer_state( ); } + { +#line 68 "dtc-lexer.l" + +#line 889 "dtc-lexer.lex.c" + while ( 1 ) /* loops until end-of-file is reached */ { yy_cp = (yy_c_buf_p); @@ -899,7 +904,7 @@ YY_DECL yy_match: do { - register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; if ( yy_accept[yy_current_state] ) { (yy_last_accepting_state) = yy_current_state; @@ -908,13 +913,13 @@ yy_match: while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) { yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 161 ) + if ( yy_current_state >= 166 ) yy_c = yy_meta[(unsigned int) yy_c]; } yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; ++yy_cp; } - while ( yy_current_state != 160 ); + while ( yy_current_state != 165 ); yy_cp = (yy_last_accepting_cpos); yy_current_state = (yy_last_accepting_state); @@ -937,7 +942,7 @@ do_action: /* This label is used only to access EOF actions. */ case 1: /* rule 1 can match eol */ YY_RULE_SETUP -#line 68 "dtc-lexer.l" +#line 69 "dtc-lexer.l" { char *name = strchr(yytext, '\"') + 1; yytext[yyleng-1] = '\0'; @@ -947,16 +952,16 @@ YY_RULE_SETUP case 2: /* rule 2 can match eol */ YY_RULE_SETUP -#line 74 "dtc-lexer.l" +#line 75 "dtc-lexer.l" { char *line, *tmp, *fn; /* skip text before line # */ line = yytext; - while (!isdigit(*line)) + while (!isdigit((unsigned char)*line)) line++; /* skip digits in line # */ tmp = line; - while (!isspace(*tmp)) + while (!isspace((unsigned char)*tmp)) tmp++; /* "NULL"-terminate line # */ *tmp = '\0'; @@ -970,11 +975,10 @@ YY_RULE_SETUP } YY_BREAK case YY_STATE_EOF(INITIAL): -case YY_STATE_EOF(INCLUDE): case YY_STATE_EO