- Fixed bug that was producing estimates of 0 for lower HCx values for log-normal mixture model with rescaled data spanning many orders of magnitude.

- Added
`delta = 7`

argument to`ssd_plot_cdf()`

.

ssdtools version 1.0.0 is the first major release of
`ssdtools`

with some important improvements and breaking
changes.

An important change to the functionality of
`ssd_fit_dists()`

was to switch from model fitting using `fitdistrplus`

to `TMB`

which
has resulted in improved handling of censored data. Although it was
hoped that model fitting would be faster this is currently not the
case.

As a result of the change the `fitdists`

objects returned
by `ssd_fit_dists()`

from previous versions of
`ssdtools`

are not compatible with the major release and
should be regenerated.

As a result of an international collaboration British Columbia and Canada and Australia and New Zealand selected a set of recommended distributions for model averaging and settings when generating final guidelines.

The distributions are

```
> ssd_dists_bcanz()
[1] "gamma" "lgumbel" "llogis" "lnorm" "lnorm_lnorm" "weibull"
```

The `ssd_fit_bcanz()`

and `ssd_hc_bcanz()`

functions were added to the package to facilitate the fitting of these
distributions and estimation of hazard concentrations using the
recommended settings.

In the previous version of `ssdtools`

a distribution was
considered to have converged if the following condition was met

`stats::optim()`

returns a code of 0 (indicating successful completion).

In the new version an additional two conditions must also be met

- Bounded parameters are not at a boundary (this condition can be
turned off by setting
`at_boundary_ok = TRUE`

or the user can specify different boundary values - see below) - Standard errors are computable for all the parameter values (this
condition can be turned off by setting
`computable = FALSE`

)

Censoring can now be specified by providing a data set with one or more rows that have

- a finite value for the left column that is smaller than the finite value in the right column (interval censored)
- a zero or missing value for the left column and a finite value for the right column (left censored)

It is currently not possible to fit distributions to data sets that have

- a infinite or missing value for the right column and a finite value for the left column (right censored)

Rows that have a zero or missing value for the left column and an infinite or missing value for the right column (fully censored) are uninformative and will result in an error.

For uncensored data, Akaike Weights are calculated using AICc (which corrects for small sample size). In the case of censored data, Akaike Weights are calculated using AIC (as the sample size cannot be estimated) but only if all the distributions have the same number of parameters (to ensure the weights are valid).

Weighting must be positive with values <= 1000.

Previously the density functions for the available distributions were
exported as R functions to make them accessible to
`fitdistrplus`

. This meant that `ssdtools`

had to
be loaded to fit distributions. The density functions are now defined in
C++ as TMB templates and are no longer exported.

The distribution, quantile and random generation functions are more
generally useful and are still exported but are now prefixed by
`ssd_`

to prevent clashes with existing functions in other
packages. Thus for example `plnorm()`

, `qlnorm()`

and `rlnorm()`

have been renamed `ssd_plnorm()`

,
`ssd_qlnorm()`

and `ssd_rlnorm()`

.

The following distributions were added (or in the case of
`burrIII3`

readded) to the new version

`burrIII3`

- burrIII three parameter distribution`invpareto`

- inverse pareto (with bias correction in scale order statistic)`lnorm_lnorm`

log-normal/log-normal mixture distribution`llogis_llogis`

log-logistic/log-logistic mixture distribution

The following arguments were added to
`ssd_fit_dists()`

`rescale`

(by default`FALSE`

) to specify whether to rescale concentrations values by dividing by the largest (finite) value. This alters the parameter estimates, which can help some distributions converge, but not the estimates of the hazard concentrations/protections.`reweight`

(by default`FALSE`

) to specify whether to reweight data points by dividing by the largest weight.`at_boundary_ok`

(by default`FALSE`

) to specifying whether a distribution with one or more parameters at a boundary has converged.`min_pmix`

(by default 0) to specify the boundary for the minimum proportion for a mixture distribution.`range_shape1`

(by default`c(0.05, 20)`

) to specify the lower and upper boundaries for the shape1 parameter of the burrIII3 distribution.`range_shape2`

(by default the same as`range_shape2`

) to specify the lower and upper boundaries for the shape2 parameter of the burrIII3 distribution.`control`

(by default an empty list) to pass a list of control parameters to`stats::optim()`

.

It also worth noting that the default value of

`computable`

argument was switched from`FALSE`

to`TRUE`

to enforce stricter requirements on convergence (see above).

The following were added to handle multiple distributions

`ssd_dists()`

to specify subsets of the available distributions.`delta`

argument (by default 7) to the`subset()`

generic to only keep those distributions within the specified AIC(c) difference of the best supported distribution.

The function `ssd_fit_burrlioz()`

was added to approximate
the behaviour of Burrlioz.

Hazard concentration estimation is performed by `ssd_hc()`

(which is wrapped by `predict()`

) and hazard protection
estimation by `ssd_hp()`

. By default confidence intervals are
estimated by parametric bootstrapping.

To reduce the time required for bootstrapping, parallelization was implemented using the future package.

The following arguments were added to `ssd_hc()`

and
`ssd_hp()`

`delta`

(by default 7) to only keep those distributions within the specified AIC difference of the best supported distribution.`min_pboot`

(by default 0.90) to specify minimum proportion of bootstrap samples that must successfully fit.`parametric`

(by default`TRUE`

) to allow non-parametric bootstrapping.`control`

(by default an empty list) to pass a list of control parameters to`stats::optim()`

.

and the following columns were added to the output data frame

`wt`

to specify the Akaike weight.`method`

to indicate whether parametric or non-parametric bootstrap was used.`nboot`

to indicate how many bootstrap samples were used.`pboot`

to indicate the proportion of bootstrap samples which fitted.

It also worth noting that the

`dist`

column was moved from the last to the first position in the output data frame.

Confidence intervals cannot be estimated for interval censored data.

Confidence intervals cannot be estimated for unequally weighted data.

The `pvalue`

argument (by default `FALSE`

) was
added to `ssd_gof()`

to specify whether to return p-values
for the test statistics as opposed to the test statistics
themselves.

There have also been some substantive changes to the plotting functionality.

Added following functions

`ssd_plot_data()`

to plot censored and uncensored data by calling`geom_ssdpoint()`

for the left and for the right column (alpha parameter values should be adjusted accordingly)`geom_ssdsegment()`

to allow plotting of the range of a censored data points using segments.`scale_colour_ssd()`

(and`scale_color_ssd()`

) to provide an 8 color-blind scale.

Made the following changes to `ssd_plot()`

- added
`bounds`

(by default`c(left = 1, right = 1)`

) argument specify how many orders of magnitude to extend the plot beyond the minimum and maximum (non-missing) values. - added
`linetype`

(by default`NULL`

) argument to specify line type. - added
`linecolor`

(by default`NULL`

) argument to specify line color. - changed default value of
`ylab`

from “Percent of Species Affected” to “Species Affected”.

Renamed - `GeomSsd`

to `GeomSsdpoint`

. -
`StatSsd`

to `StatSsdpoint`

Soft-deprecated - `geom_ssd()`

for
`geom_ssdpoint()`

. - `stat_ssd()`

. -
`ssd_plot_cf()`

for
`fitdistrplus::descdist()`

.

`ssddata`

The dataset `boron_data`

was renamed
`ccme_boron`

and moved to the `ssddata`

R
package together with the other CCME datasets.

The `ssddata`

package provides a suite of datasets for
testing and comparing species sensitivity distribution fitting
software.

Added

`ssd_data()`

to return original data for a`fitdists`

object.`ssd_ecd_data()`

to get empirical cumulative density for data.`ssd_sort_data()`

to sort data by empirical cumulative density.

`npars()`

now orders by distribution name.- All functions and arguments that were soft-deprecated prior to v0.3.0 now warn unconditionally.

Implemented the following generics for

`fitdists`

objects`glance()`

to get the model likelihoods, information-theoretic criteria etc.`augment()`

to return original data set.`logLik()`

to return the log-likelihood.`summary.fitdists()`

to summarize.

- Same as previous version.

- fix unequal indentation of Rmd ```

- Added
`wt`

(Akaike weight) column to`predict()`

,`ssd_hc()`

and`ssd_hp()`

- Deprecated argument
`ic`

to`predict()`

,`ssd_hc()`

and`ssd_hp()`

because unused. - Silenced output from
`ssd_fit_dists()`

.

- Bump requirement to R >= 4.1 because of
`actuar`

package.

- Update Apache License url to https.

- Increased requirement that R >= 3.5 due to VGAM.
- Modified
`comma_signif()`

so that now rounds to 3 significant digits by default and only applies`scales::comma()`

to values >= 1000. - Soft-deprecated the
`...`

argument to`comma_signif()`

.

- Fix moved URLs.

- Internal changes only.

- Soft-deprecated ‘burrIII3’ distribution as poorly defined.
- Soft-deprecated ‘pareto’ distribution as poor fit on SSD data.

- Reparameterized ‘llogis’ distribution in terms of locationlog and scalelog.
- Reparameterized ‘burrIII3’ distribution in terms of lshape1, lshape2 and lscale.
- Reparamaterized ‘burrIII2’ distribution in terms of locationlog and scalelog.
- Reparamaterized ‘lgumbel’ distribution in terms of locationlog and scalelog.
- Reparamaterized ‘gompertz’ distribution in terms of llocation and lshape.
- Standardized handling of arguments for d,p,q,r and s functions for distributions.

`rdist()`

functions now use length of n if`length(n) > 1`

.- Added
`slnorm()`

to get starting values for ‘dlnorm’ distribution.

- Switch to C++ implementation for distributions.

- Changed computable (whether standard errors must be computable to be considered to have converged) to FALSE by default.
- Enforces only one of ‘llogis’, ‘llog’ or ‘burrIII2’ in all sets (as identical).

- Deprecated ‘burrIII2’ for ‘llogis’ as identical.
- Replaced ‘burrIII2’ for (identical) ‘llogis’ in default set.
- Fixed bug in
`rllog()`

that was causing error. - Fixed parameterisation of ‘lgumbel’ that was causing it to fail to fit with some data.

- Provides warning message about change in default for ci argument in predict function.
- Only gives warning about standard errors not being computable if computable = TRUE.
- Uses tibble package to create tibbles.
- Removed dependency on checkr.

- Fix test for CRAN R 3.5

- Default distributions changed to ‘burrIII2’, ‘gamma’ and ‘lnorm’ from ‘gamma’, ‘gompertz’, ‘lgumbel’, ‘llog’, ‘lnorm’ and ‘weibull’.
- Changed implicit behaviour of
`ssd_hc()`

and`predict()`

where`ci = TRUE`

to explicit`ssd_hc(ci = FALSE)`

and`predict(ci = FALSE)`

. - Replaced
`shape`

and`scale`

arguments to`llog()`

with`lshape`

and`lscale`

. - Replaced
`location`

and`scale`

arguments to`lgumbel()`

with`llocation`

and`lscale`

.

- Added Burr Type-III Two-Parameter Distribution
(
`burrIII2`

). - Added
`ssd_hp()`

to calculate hazard percent at specific concentrations. - Added
`ssd_exposure()`

to calculate proportion exposed based on distribution of concentrations. - Optimized
`predict()`

and added parallel argument. - Tidyverse style error and warning messages.

`ssd_fit_dists()`

now checks if standard errors computable.- Added Burr Type-III Three-Parameter Distribution
(
`burrIII3`

). - Added
`sdist(x)`

functionality to set starting values for distributions. - Added
`ssd_plot_cdf()`

to plot cumulative distribution function (equivalent to`autoplot()`

) `nobs()`

for censored data now returns a missing value.- Default
`ssd_fit_dists()`

distributions now ordered alphabetically.

- Deprecated
`ssd_hc()`

argument`hc = 5L`

for`percent = 5L`

. - Deprecated
`dllog()`

etc for`dllogis()`

. - Deprecated
`ssd_cfplot()`

for`ssd_plot_cf()`

.

- Fixed
`llog`

distribution with small concentrations. - Ensured concentrations below 1 have 1 significant figure in plots.

- added citation
- Added ssdtools-manual vignette
- Changed predict() and ssd_hc() nboot argument from 1001 to 1000
- Added hc5_boron data object
- No longer export ssd_fit_dist() as ssd_fit_dists() renders redundant
- geom_hcintersect() now takes multiple values
- More information in DESCRIPTION
- Added CRAN badge
- Removed dependencies: dplyr, magrittr, plyr, purrr
- Moved from depends to imports: VGAM, fitdistrplus, graphics, ggplot, stats
- Moved from imports to suggests: tibble

- Added contributors
- Added hex

- Initial Release