Lüdecke D (2018). *ggeffects: Tidy Data Frames of Marginal Effects
from Regression Models.* Journal of Open Source Software, 3(26),
772. doi: 10.21105/joss.00772

After fitting a model, it is useful generate model-based estimates
(expected values, or *adjusted predictions*) of the response
variable for different combinations of predictor values. Such estimates
can be used to make inferences about relationships between
variables.

*Adjusted predictions* or *marginal means* are often
easier to understand than raw regression coefficients. In particular,
their visualization allows to intuitively get the idea of how predictors
and outcome are associated, even for complex models.

**ggeffects** is a light-weight package that aims at
easily calculating adjusted predictions and estimated marginal means at
meaningful values of covariates from statistical models. Furthermore, it
is possible to compute contrasts or pairwise comparisons, to test
predictions and differences in predictions for statistical significance.
Finally, you can easily produce nice figures to visualize the
results.

What you basically would need for your workflow is:

`predict_response()`

(understand your results)`test_predictions()`

(check for “significant” results)`plot()`

(communicate your results)

Three core ideas describe the philosophy of the function design and help users to achieve the above mentioned goals:

Functions are type-safe and always return a data frame with the same, consistent structure;

there is a simple, unique approach to calculate adjusted predictions and estimated marginal means for many different models;

the package supports “labelled data” (Lüdecke 2018), which allows human readable annotations for graphical outputs.

This means, users do not need to care about any expensive steps after
modeling to visualize the results. The returned as data frame is ready
to use with the **ggplot2**-package, however, there is also
a `plot()`

-method to easily create publication-ready
figures.

Adjusted predictions or estimated marginal means are always
calculated on the *response* scale, which is the easiest and most
intuitive scale to interpret the results.

It is easy to start, you just need one function:
`predict_response()`

, and two arguments: the model and the
“focal terms”, i.e. the predictors that you are mainly interested in.
Examples are shown below.

You should use *ggeffects*…

… when you want to understand how predictors and outcome are related, no matter whether you have simple or complex models, interaction or transformed terms. See how to start in this vignette. The syntax for the

*ggeffects*functions is super easy and consistent across the different type of models and complexity.… when you want to perform pairwise comparisons, in order to see whether there are statistically significant differences in the association of, for instance, different groups or categories of your predictors and your outcome (“effects”, or sometimes “marginal effects”). There are several vignettes describing this in detail, starting with this vignette.

… when you need impressive figures instead of long, confusing tables to describe your results. There are several examples in the documentation, for example this vignette.

… and even when you want to check, whether your model appropriately describes your data. See this vignette to learn more about how to use

*ggeffects*for model diagnostics.

A workflow in R would then include using following functions in this
order: `predict_response()`

, `plot()`

, and
`test_predictions()`

- that’s all you need! See also this
example workflow using logistic regression.

Type | Source | Command |
---|---|---|

Release | CRAN | `install.packages("ggeffects")` |

Development | r - universe | `install.packages("ggeffects", repos = "https://strengejacke.r-universe.dev")` |

Development | GitHub | `remotes::install_github("strengejacke/ggeffects")` |

Or you can run `ggeffects::install_latest()`

to install the latest development version from r-universe.

`predict_response()`

is a wrapper around three “workhorse”
functions, `ggpredict()`

, `ggemmeans()`

and
`ggaverage()`

. Depending on the value of the
`margin`

argument, `predict_response()`

calls one
of those functions, with different arguments. It’s important to note
that:

Predictions are always returned on the

*response scale*, no matter which model is used. This is the most intuitive scale to interpret your results (the predicted values).The response is predicted at the values or levels of your

*focal terms*, i.e. you specify the predictors you are mainly interested in, using the`terms`

argument. The predicted values are calculated for these values, while all other predictors are marginalized over.

The `margin`

argument in `predict_response()`

indicates how to marginalize over the *non-focal* predictors,
i.e. those variables that are *not* specified in
`terms`

. Each option answers slightly different questions.
Possible values are:

`"mean_reference"`

and`"mean_mode"`

:`"mean_reference"`

calls`ggpredict()`

, i.e. non-focal predictors are set to their mean (numeric variables), reference level (factors), or “most common” value (mode) in case of character vectors.`"mean_mode"`

calls`ggpredict(typical = c(numeric = "mean", factor = "mode"))`

, i.e. non-focal predictors are set to their mean (numeric variables) or mode (factors, or “most common” value in case of character vectors).Question answered: “What is the predicted value of the response at meaningful values or levels of my focal terms for a ‘typical’ observation in my data?”, where ‘typical’ refers to certain characteristics of the remaining predictors.

`"marginalmeans"`

: calls`ggemmeans()`

, i.e. non-focal predictors are set to their mean (numeric variables) or marginalized over the levels or “values” for factors and character vectors. Marginalizing over the factor levels of non-focal terms computes a kind of “weighted average” for the values at which these terms are hold constant.Question answered: “What is the predicted value of the response at meaningful values or levels of my focal terms for an ‘average’ observation in my data?”. It refers to randomly picking a subject of your sample and the result you get on average.

`"empirical"`

(or`"counterfactual"`

): calls`ggaverage()`

, i.e. non-focal predictors are marginalized over the observations in your sample. The response is predicted for each subject in the data and predicted values are then averaged across all subjects, aggregated/grouped by the focal terms. Averaging is applied to “counterfactual” predictions (Dickerman and Hernán 2020). There is a more detailed description in this vignette.Question answered: “What is the predicted value of the response at meaningful values or levels of my focal terms for the ‘average’ observation in the population?”. It does not only refer to the actual data in your sample, but also “what would be if” we had more data, or if we had data from a different population.

**And what about marginal effects?** Marginal effects
refer to the difference between two adjacent predictions. They are not
the same as marginal means or adjusted predictions. However, calculating
contrasts or pairwise comparisons with `test_predictions()`

can be used to test for differences in predictions (aka marginal
effects).

Here’s an example:

```
library(ggeffects)
library(marginaleffects)
<- lm(Petal.Width ~ Petal.Length + Species, data = iris)
m
# we want the marginal effects for "Species". We can calculate
# the marginal effect using the "marginaleffects" package
::avg_slopes(m, variables = "Species")
marginaleffects#>
#> Term Contrast Estimate Std. Error z Pr(>|z|) S
#> Species mean(versicolor) - mean(setosa) 0.435 0.103 4.23 <0.001 15.4
#> Species mean(virginica) - mean(setosa) 0.838 0.145 5.76 <0.001 26.9
#> 2.5 % 97.5 %
#> 0.234 0.637
#> 0.553 1.123
#>
#> Columns: term, contrast, estimate, std.error, statistic, p.value, s.value, conf.low, conf.high, predicted_lo, predicted_hi, predicted
#> Type: response
```

```
# here we show that marginal effects refer to the difference between
# predictions for a one-unit change of "Species"
<- predict_response(m, "Species", margin = "empirical")
out
out#> # Average predicted values of Petal.Width
#>
#> Species | Predicted | 95% CI
#> -----------------------------------
#> setosa | 0.77 | 0.61, 0.94
#> versicolor | 1.21 | 1.15, 1.27
#> virginica | 1.61 | 1.48, 1.74
```

```
# marginal effects of "versicolor", relative to "setosa"
$predicted[2] - out$predicted[1]
out#> [1] 0.44
```

```
# marginal effects of "virginica", relative to "setosa"
$predicted[3] - out$predicted[1]
out#> [1] 0.84
```

```
# finally, test_predictions() returns the same. while the previous results
# report the marginal effect compared to the reference level "setosa",
# test_predictions() returns the marginal effects for all pairwise comparisons
test_predictions(m, "Species")
#> # Pairwise comparisons
#>
#> Species | Contrast | 95% CI | p
#> -------------------------------------------------------
#> setosa-versicolor | -0.44 | -0.64, -0.23 | < .001
#> setosa-virginica | -0.84 | -1.12, -0.55 | < .001
#> versicolor-virginica | -0.40 | -0.52, -0.29 | < .001
```

Please visit https://strengejacke.github.io/ggeffects/ for documentation and vignettes. For questions about the functionality, you may either contact me via email or also file an issue.

Adjusted predictions can be calculated for many different models. Currently supported model-objects are: averaging, bamlss, bayesx, betabin, betareg, bglmer, bigglm, biglm, blmer, bracl, brglm, brmsfit, brmultinom, cgam, cgamm, clm, clm2, clmm, coxph, feglm, fixest, flac, flic, gam, Gam, gamlss, gamm, gamm4, gee, geeglm, glimML, glm, glm.nb, glmer.nb, glmerMod, glmgee, glmmPQL, glmmTMB, glmrob, glmRob, glmx, gls, hurdle, ivreg, lm, lm_robust, lme, lmerMod, lmrob, lmRob, logistf, logitr, lrm, mblogit, mclogit, MCMCglmm, merModLmerTest, MixMod, mixor, mlogit, multinom, negbin, nestedLogit, nlmerMod, ols, orm, phyloglm, phylolm, plm, polr, rlm, rlmerMod, rq, rqs, rqss, sdmTMB, speedglm, speedlm, stanreg, survreg, svyglm, svyglm.nb, tidymodels, tobit, truncreg, vgam, vglm, wblm, wbm, Zelig-relogit, zeroinfl, zerotrunc.

Support for models varies by marginalization method (the
`margin`

argument), i.e. although
`predict_response()`

supports most models, some models are
only supported exclusively by one of the four downstream functions
(`ggpredict()`

, `ggemmeans()`

,
`ggeffect()`

or `ggaverage()`

). This means that
not all models work for every `margin`

option of
`predict_response()`

. Other models not listed here might work
as well, but are currently not tested.

Interaction terms, splines and polynomial terms are also supported.
There is a generic `plot()`

-method to plot the results using
**ggplot2**.

The returned data frames always have the same, consistent structure
and column names, so it’s easy to create ggplot-plots without the need
to re-write the function call. `x`

and `predicted`

are the values for the x- and y-axis. `conf.low`

and
`conf.high`

could be used as `ymin`

and
`ymax`

aesthetics for ribbons to add confidence bands to the
plot. `group`

can be used as grouping-aesthetics, or for
faceting.

`predict_response()`

requires at least one, but not more
than four terms specified in the `terms`

-argument. Predicted
values of the response, along the values of the first term are
calculated, optionally grouped by the other terms specified in
`terms`

.

```
library(ggeffects)
library(splines)
library(datawizard)
data(efc, package = "ggeffects")
<- to_factor(efc, c("c161sex", "e42dep"))
efc <- lm(barthtot ~ c12hour + bs(neg_c_7) * c161sex + e42dep, data = efc)
fit
predict_response(fit, terms = "c12hour")
#> # Predicted values of barthtot
#>
#> c12hour | Predicted | 95% CI
#> ----------------------------------
#> 4 | 89.91 | 84.18, 95.63
#> 12 | 89.34 | 83.62, 95.06
#> 22 | 88.63 | 82.90, 94.36
#> 36 | 87.64 | 81.88, 93.40
#> 49 | 86.72 | 80.90, 92.53
#> 70 | 85.23 | 79.30, 91.16
#> 100 | 83.10 | 76.92, 89.29
#> 168 | 78.28 | 71.24, 85.33
#>
#> Adjusted for:
#> * neg_c_7 = 11.83
#> * c161sex = Male
#> * e42dep = independent
```

A possible call to ggplot could look like this:

```
library(ggplot2)
<- predict_response(fit, terms = "c12hour")
mydf ggplot(mydf, aes(x, predicted)) +
geom_line() +
geom_ribbon(aes(ymin = conf.low, ymax = conf.high), alpha = 0.1)
```

However, there is also a `plot()`

-method. This method uses
convenient defaults, to easily create the most suitable plot for the
predictions.

```
<- predict_response(fit, terms = "c12hour")
mydf plot(mydf)
```

With three variables, predictions can be grouped and faceted.

```
<- predict_response(fit, terms = c("neg_c_7", "c161sex", "e42dep"))
result # we want a more compact table, thus we use `print()` explicitly
print(result, collapse_table = TRUE, collapse_ci = TRUE)
#> # Predicted values of barthtot
#>
#> neg_c_7 | c161sex | e42dep | Predicted (95% CI)
#> -----------------------------------------------------------------
#> 7 | Male | independent | 93.73 (87.01, 100.44)
#> 12 | | | 86.89 (81.09, 92.70)
#> 17 | | | 80.62 (73.69, 87.54)
#> 28 | | | 148.54 (85.66, 211.42)
#> 7 | | slightly dependent | 87.41 (81.27, 93.56)
#> 12 | | | 80.58 (76.32, 84.84)
#> 17 | | | 74.31 (68.46, 80.15)
#> 28 | | | 142.23 (79.71, 204.75)
#> 7 | | moderately dependent | 78.29 (72.08, 84.49)
#> 12 | | | 71.46 (67.64, 75.27)
#> 17 | | | 65.18 (59.75, 70.60)
#> 28 | | | 133.10 (70.44, 195.76)
#> 7 | | severely dependent | 41.93 (35.66, 48.21)
#> 12 | | | 35.10 (30.98, 39.22)
#> 17 | | | 28.82 (23.41, 34.24)
#> 28 | | | 96.75 (34.08, 159.41)
#> 7 | Female | independent | 98.04 (93.06, 103.02)
#> 12 | | | 86.61 (81.85, 91.37)
#> 17 | | | 82.58 (77.33, 87.82)
#> 28 | | | 81.57 (64.41, 98.73)
#> 7 | | slightly dependent | 91.73 (87.89, 95.57)
#> 12 | | | 80.30 (77.43, 83.17)
#> 17 | | | 76.26 (72.57, 79.96)
#> 28 | | | 75.26 (58.64, 91.87)
#> 7 | | moderately dependent | 82.60 (78.62, 86.59)
#> 12 | | | 71.17 (68.79, 73.56)
#> 17 | | | 67.14 (63.95, 70.33)
#> 28 | | | 66.13 (49.52, 82.74)
#> 7 | | severely dependent | 46.25 (41.93, 50.57)
#> 12 | | | 34.82 (32.27, 37.37)
#> 17 | | | 30.78 (27.67, 33.90)
#> 28 | | | 29.78 (13.33, 46.23)
#>
#> Adjusted for:
#> * c12hour = 42.10
```

```
ggplot(result, aes(x = x, y = predicted, colour = group)) +
geom_line() +
facet_wrap(~facet)
```

`plot()`

works for this case, as well:

`plot(result)`

Next, an example of an interaction term. We want to know whether the two slopes are significantly different from each other.

```
<- lm(neg_c_7 ~ c12hour + barthtot * c161sex + e42dep, data = efc)
fit <- predict_response(fit, c("barthtot", "c161sex"))
result plot(result)
```

This can be achieved by `test_predictions()`

.

```
test_predictions(result)
#> # (Average) Linear trend for barthtot
#>
#> c161sex | Contrast | 95% CI | p
#> --------------------------------------------
#> Male-Female | 0.01 | -0.01, 0.03 | 0.466
```

We can conclude that slopes (or “linear trends”) of
`barthtot`

for the different groups of `c161sex`

are not statistically significantly different from each other.

More features are explained in detail in the package-vignettes.

In case you want / have to cite my package, please use
`citation('ggeffects')`

for citation information:

Lüdecke D (2018). *ggeffects: Tidy Data Frames of Marginal Effects
from Regression Models.* Journal of Open Source Software, 3(26),
772. doi: 10.21105/joss.00772

Dickerman, Barbra A., and Miguel A. Hernán. 2020. “Counterfactual
Prediction Is Not Only for Causal Inference.” *European Journal of
Epidemiology* 35 (7): 615–17. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7393612/.

Lüdecke, Daniel. 2018. “Sjlabelled: Labelled Data Utility Functions,”
May. https://doi.org/10.5281/zenodo.1249215.