In experiments, we control the conditions under which observations
are made. Ideally, this leads to balanced datasets and clear inferences
about the effects of those experimental conditions. In observational
data, factor levels are observed rather than controlled, and in the
analysis we control *for* those factors and covariates. It is
possible that some factors and covariates lie in the causal path for
other predictors. Observational studies can be designed in ways to
mitigate some of these issues; but often we are left with a mess. Using
EMMs does not solve the inherent problems in messy, undesigned studies;
but they do give us ways to compensate for imbalance in the data, and
allow us to estimate meaningful effects after carefully considering the
ways in which they can be confounded.

As an illustration, consider the `nutrition`

dataset
provided with the package. These data are used as an example in Milliken
and Johnson (1992), *Analysis of Messy Data*, and contain the
results of an observational study on nutrition education. Low-income
mothers are classified by race, age category, and whether or not they
received food stamps (the `group`

factor); and the response
variable is a gain score (post minus pre scores) after completing a
nutrition training program. First, let’s fit a model than includes all
main effects and 2-way interactions, and obtain its “type II” ANOVA:

```
nutr.lm <- lm(gain ~ (age + group + race)^2, data = nutrition)
car::Anova(nutr.lm)
```

```
## Note: model has aliased coefficients
## sums of squares computed by model comparison
```

```
## Anova Table (Type II tests)
##
## Response: gain
## Sum Sq Df F value Pr(>F)
## age 82.37 3 0.9614 0.4145
## group 658.13 1 23.0441 6.105e-06
## race 11.17 2 0.1956 0.8227
## age:group 91.58 3 1.0688 0.3663
## age:race 87.30 3 1.0189 0.3880
## group:race 113.70 2 1.9906 0.1424
## Residuals 2627.47 92
```

There is definitely a `group`

effect and a hint of and
interaction with `race`

. Here are the EMMs for those two
factors, along with their counts:

`emmeans(nutr.lm, ~ group * race, calc = c(n = ".wgt."))`

```
## group race emmean SE df n lower.CL upper.CL
## FoodStamps Black 4.71 2.37 92 7 0.00497 9.41
## NoAid Black -2.19 2.49 92 14 -7.13690 2.76
## FoodStamps Hispanic nonEst NA NA 1 NA NA
## NoAid Hispanic nonEst NA NA 2 NA NA
## FoodStamps White 3.61 1.16 92 52 1.31252 5.90
## NoAid White 2.26 2.39 92 31 -2.48897 7.00
##
## Results are averaged over the levels of: age
## Confidence level used: 0.95
```

Hmmmm. The EMMs when `race`

is “Hispanic” are not given;
instead they are flagged as non-estimable. What does that mean? Well,
when using a model to make predictions, it is impossible to do that
beyond the linear space of the data used to fit the model. And we have
no data for three of the age groups in the Hispanic population:

`with(nutrition, table(race, age))`

```
## age
## race 1 2 3 4
## Black 2 7 10 2
## Hispanic 0 0 3 0
## White 5 16 51 11
```

We can’t make predictions for all the cases we are averaging over in the above EMMs, and that is why some of them are non-estimable. The bottom line is that we simply cannot include Hispanics in the mix when comparing factor effects. That’s a limitation of this study that cannot be overcome without collecting additional data. Our choices for further analysis are to focus only on Black and White populations; or to focus only on age group 3. For example (the latter):

```
emmeans(nutr.lm, pairwise ~ group | race, at = list(age = "3")) |>
summary(by = NULL)
```

```
## Note: adjust = "tukey" was changed to "sidak"
## because "tukey" is only appropriate for one set of pairwise comparisons
```

```
## $emmeans
## group race emmean SE df lower.CL upper.CL
## FoodStamps Black 7.50 2.67 92 2.19 12.807
## NoAid Black -3.67 2.18 92 -8.00 0.666
## FoodStamps Hispanic 0.00 5.34 92 -10.61 10.614
## NoAid Hispanic 2.50 3.78 92 -5.01 10.005
## FoodStamps White 5.42 0.96 92 3.51 7.326
## NoAid White -0.20 1.19 92 -2.57 2.173
##
## Confidence level used: 0.95
##
## $contrasts
## contrast race estimate SE df t.ratio p.value
## FoodStamps - NoAid Black 11.17 3.45 92 3.237 0.0050
## FoodStamps - NoAid Hispanic -2.50 6.55 92 -0.382 0.9739
## FoodStamps - NoAid White 5.62 1.53 92 3.666 0.0012
##
## P value adjustment: sidak method for 3 tests
```

(We used trickery with providing a `by`

variable, and then
taking it away, to make the output more compact.) Evidently, the
training program has been beneficial to the Black and White groups in
that age category. There is no conclusion for the Hispanic group – for
which we have very little data.

The `framing`

data in the **mediation**
package has the results of an experiment conducted by Brader et
al. (2008) where subjects were given the opportunity to send a message
to Congress regarding immigration. However, before being offered this,
some subjects (`treat = 1`

) were first shown a news story
that portrays Latinos in a negative way. Besides the binary response
(whether or not they elected to send a message), the experimenters also
measured `emo`

, the subjects’ emotional state after the
treatment was applied. There are various demographic variables as well.
Let’s a logistic regression model, after changing the labels for
`educ`

to shorter strings.

```
framing <- mediation::framing
levels(framing$educ) <- c("NA","Ref","< HS", "HS", "> HS","Coll +")
framing.glm <- glm(cong_mesg ~ age + income + educ + emo + gender * factor(treat),
family = binomial, data = framing)
```

The conventional way to handle covariates like `emo`

is to
set them at their means and use those means for purposes of predictions
and EMMs. These adjusted means are shown in the following plot.

`emmip(framing.glm, treat ~ educ | gender, type = "response") `

This plot gives the impression that the effect of `treat`

is reversed between male and female subjects; and also that the effect
of education is not monotone. Both of these are counter-intuitive.

However, note that the covariate `emo`

is measured
*post*-treatment. That suggests that in fact `treat`

(and perhaps other factors) could affect the value of `emo`

;
and if that is true (as is in fact established by mediation analysis
techniques), we should not pretend that `emo`

can be set
independently of `treat`

as was done to obtain the EMMs shown
above. Instead, let `emo`

depend on `treat`

and
the other predictors – easily done using `cov.reduce`

– and
we obtain an entirely different impression:

```
emmip(framing.glm, treat ~ educ | gender, type = "response",
cov.reduce = emo ~ treat*gender + age + educ + income)
```

The reference grid underlying this plot has different
`emo`

values for each factor combination. The plot suggests
that, after taking emotional response into account, male (but not
female) subjects exposed to the negative news story are more likely to
send the message than are females or those not seeing the negative news
story. Also, the effect of `educ`

is now nearly monotone.

By the way, the results in this plot are the same is what you would obtain by refitting the model with an adjusted covariate

`emo.adj <- resid(lm(emo ~ treat*gender + age + educ + income, data = framing))`

… and then using ordinary covariate-adjusted means at the means of
`emo.adj`

. This is a technique that is often recommended.

If there is more than one mediating covariate, their settings may be
defined in sequence; for example, if `x1`

, `x2`

,
and `x3`

are all mediating covariates, we might use

`emmeans(..., cov.reduce = list(x1 ~ trt, x2 ~ trt + x1, x3 ~ trt + x1 + x2))`

(or possibly with some interactions included as well).

A mediating covariate is one that is in the causal path; likewise, it
is possible to have a mediating *factor*. For mediating factors,
the moral equivalent of the `cov.reduce`

technique described
above is to use *weighted* averages in lieu of equally-weighted
ones in computing EMMs. The weights used in these averages should depend
on the frequencies of mediating factor(s). Usually, the
`"cells"`

weighting scheme described later in this section is
the right approach. In complex situations, it may be necessary to
compute EMMs in stages.

As described in the “basics”
vignette, EMMs are usually defined as *equally-weighted*
means of reference-grid predictions. However, there are several built-in
alternative weighting schemes that are available by specifying a
character value for `weights`

in a call to
`emmeans()`

or related function. The options are
`"equal"`

(the default), `"proportional"`

,
`"outer"`

, `"cells"`

, and `"flat"`

.

The `"proportional"`

(or `"prop"`

for short)
method weights proportionally to the frequencies (or model weights) of
each factor combination that is averaged over. The `"outer"`

method uses the outer product of the marginal frequencies of each factor
that is being averaged over. To explain the distinction, suppose the
EMMs for `A`

involve averaging over two factors
`B`

and `C`

. With `"prop"`

, we use the
frequencies for each combination of `B`

and `C`

;
whereas for `"outer"`

, first obtain the marginal frequencies
for `B`

and for `C`

and weight proportionally to
the product of these for each combination of `B`

and
`C`

. The latter weights are like the “expected” counts used
in a chi-square test for independence. Put another way, outer weighting
is the same as proportional weighting applied one factor at a time; the
following two would yield the same results:

```
emmeans(model, "A", weights = "outer")
emmeans(model, c("A", "B"), weights = "prop") |> emmeans(weights = "prop")
```

Using `"cells"`

weights gives each prediction the same
weight as occurs in the model; applied to a reference grid for a model
with all interactions, `"cells"`

-weighted EMMs are the same
as the ordinary marginal means of the data. With `"flat"`

weights, equal weights are used, except zero weight is applied to any
factor combination having no data. Usually, `"cells"`

or
`"flat"`

weighting will *not* produce non-estimable
results, because we exclude empty cells. (That said, if covariates are
linearly dependent with factors, we may still encounter non-estimable
cases.)

Here is a comparison of predictions for `nutr.lm`

defined
above, using different weighting schemes:

```
sapply(c("equal", "prop", "outer", "cells", "flat"), \(w)
emmeans(nutr.lm, ~ race, weights = w) |> predict())
```

```
## equal prop outer cells flat
## [1,] 1.258929 1.926554 2.546674 0.3809524 0.6865079
## [2,] NA NA NA 1.6666667 1.2500000
## [3,] 2.932008 2.522821 3.142940 2.7951807 1.6103407
```

In the other hand, if we do `group * race`

EMMs, only one
factor (`age`

) is averaged over; thus, the results for
`"prop"`

and `"outer"`

weights will be identical
in that case.

Consider a situation where we have a model with 15 factors, each at 5
levels. Regardless of how simple or complex the model is, the reference
grid consists of all combinations of these factors – and there are \(%^15\) of these, or over 30 billion. If
there are, say, 100 regression coefficients in the model, then just the
`linfct`

slot in the reference grid requires \(100\times5^15\times8\) bytes of storage, or
almost 23,000 gigabytes. Suppose in addition the model has a
multivariate response with 5 levels. That multiplies *both* the
rows and columns in `linfct`

, increasing the storage
requirements by a factor of 25. Either way, your computer can’t store
that much – so this definitely qualifies as a messy situation!

The `ref_grid()`

function now provides some relief, in the
way of specifying some of the factors as “nuisance” factors. The
reference grid is then constructed with those factors already
averaged-out. So, for example with the same scenario, if only three of
those 15 factors are of primary interest, and we specify the other 12 as
nuisance factors to be averaged, that leaves us with only \(3^5=125\) rows in the reference grid, and
hence \(125\times100\times8=10,000\)
bytes of storage required for `linfct`

. If there is a 5-level
multivariate response, we’ll have 625 rows in the reference grid and
\(25\times1000=250,000\) bytes in
`linfct`

. Suddenly a horribly unmanageable situation becomes
quite manageable!

But of course, there is a restriction: nuisance factors must not interact with any other factors – not even other nuisance factors. And a multivariate response (or an implied multivariate response, e.g., in an ordinal model) can never be a nuisance factor. Under that condition, the average effects of a nuisance factor are the same regardless of the levels of other factors, making it possible to pre-average them by considering just one case.

We specify nuisance factors by listing their names in a
`nuisance`

argument to `ref_grid()`

(in
`emmeans()`

, this argument is passed to
`ref_grid)`

). Often, it is much more convenient to give the
factors that are *not* nuisance factors, via a
`non.nuisance`

argument. If you do specify a nuisance factor
that does interact with others, or doesn’t exist, it is quietly excluded
from the nuisance list.

Time for an example. Consider the `mtcars`

dataset
standard in R, and the model

```
mtcars.lm <- lm(mpg ~ factor(cyl)*am + disp + hp + drat + log(wt) + vs +
factor(gear) + factor(carb), data = mtcars)
```

And let’s construct two different reference grids:

```
rg.usual <- ref_grid(mtcars.lm)
rg.usual
```

```
## 'emmGrid' object with variables:
## cyl = 4, 6, 8
## am = 0, 1
## disp = 230.72
## hp = 146.69
## drat = 3.5966
## wt = 3.2172
## vs = 0, 1
## gear = 3, 4, 5
## carb = 1, 2, 3, 4, 6, 8
```

`nrow(rg.usual@linfct)`

`## [1] 216`

```
rg.nuis = ref_grid(mtcars.lm, non.nuisance = "cyl")
rg.nuis
```

```
## 'emmGrid' object with variables:
## cyl = 4, 6, 8
## am = 0, 1
## Nuisance factors that have been collapsed by averaging:
## disp(1), hp(1), drat(1), wt(1), vs(2), gear(3), carb(6)
```

`nrow(rg.nuis@linfct)`

`## [1] 6`

Notice that we left `am`

out of `non.nuisance`

and hence included it in `nuisance`

. However, it interacts
with `cyl`

, so it was not allowed as a nuisance factor. But
`rg.nuis`

requires 1/36 as much storage. There’s really
nothing else to show, other than to demonstrate that we get the same
EMMs either way, with slightly different annotations:

`emmeans(rg.usual, ~ cyl * am)`

```
## cyl am emmean SE df lower.CL upper.CL
## 4 0 19.0 4.29 14 9.823 28.2
## 6 0 19.7 3.32 14 12.556 26.8
## 8 0 29.0 5.98 14 16.130 41.8
## 4 1 15.4 4.29 14 6.206 24.6
## 6 1 27.3 4.90 14 16.741 37.8
## 8 1 11.2 5.56 14 -0.718 23.1
##
## Results are averaged over the levels of: vs, gear, carb
## Confidence level used: 0.95
```

`emmeans(rg.nuis, ~ cyl * am)`

```
## cyl am emmean SE df lower.CL upper.CL
## 4 0 19.0 4.29 14 9.823 28.2
## 6 0 19.7 3.32 14 12.556 26.8
## 8 0 29.0 5.98 14 16.130 41.8
## 4 1 15.4 4.29 14 6.206 24.6
## 6 1 27.3 4.90 14 16.741 37.8
## 8 1 11.2 5.56 14 -0.718 23.1
##
## Results are averaged over the levels of: 7 nuisance factors
## Confidence level used: 0.95
```

By default, the pre-averaging is done with equal weights. If we
specify `wt.nuis`

as anything other than
`"equal"`

, they are averaged proportionally. As described
above, this really amounts to `"outer"`

weights since they
are averaged separately. Let’s try it to see how the estimates
differ:

```
predict(emmeans(mtcars.lm, ~ cyl * am, non.nuis = c("cyl", "am"),
wt.nuis = "prop"))
```

`## [1] 16.51254 17.17869 26.45709 12.90600 24.75053 8.70546`

`predict(emmeans(mtcars.lm, ~ cyl * am, weights = "outer"))`

`## [1] 16.51254 17.17869 26.45709 12.90600 24.75053 8.70546`

These are the same as each other, but different from the
equally-weighted EMMs we obtained before. By the way, to help make
things consistent, if `weights`

is character,
`emmeans()`

passes `wt.nuis = weights`

to
`ref_grid`

(if it is called), unless `wt.nuis`

is
also specified.

There is a trick to get `emmeans`

to use the smallest
possible reference grid: Pass the `specs`

argument to
`ref_grid()`

as `non.nuisance`

. But we have to
quote it to delay evaluation, and also use `all.vars()`

if
(and only if) `specs`

is a formula:

`emmeans(mtcars.lm, ~ gear | am, non.nuis = quote(all.vars(specs)))`

```
## am = 0:
## gear emmean SE df lower.CL upper.CL
## 3 15.2 2.65 14 9.56 20.9
## 4 22.4 3.36 14 15.20 29.6
## 5 30.0 4.54 14 20.28 39.7
##
## am = 1:
## gear emmean SE df lower.CL upper.CL
## 3 10.6 4.49 14 1.02 20.3
## 4 17.8 2.62 14 12.19 23.4
## 5 25.4 4.05 14 16.72 34.1
##
## Results are averaged over the levels of: 6 nuisance factors, cyl
## Confidence level used: 0.95
```

Observe that `cyl`

was passed over as a nuisance factor
because it interacts with another factor.

We have just seen how easily the size of a reference grid can get out
of hand. The `rg.limit`

option (set via
`emm_options()`

or as an optional argument in
`ref_grid()`

or `emmeans()`

) serves to guard
against excessive memory demands. It specifies the number of allowed
rows in the reference grid. But because of the way
`ref_grid()`

works, this check is made *before* any
multivariate-response levels are taken into account. If the limit is
exceeded, an error is thrown:

`ref_grid(mtcars.lm, rg.limit = 200)`

```
## Error: The rows of your requested reference grid would be 216, which exceeds
## the limit of 200 (not including any multivariate responses).
## Your options are:
## 1. Specify some (or more) nuisance factors using the 'nuisance' argument
## (see ?ref_grid). These must be factors that do not interact with others.
## 2. Add the argument 'rg.limit = <new limit>' to the call. Be careful,
## because this could cause excessive memory use and performance issues.
## Or, change the default via 'emm_options(rg.limit = <new limit>)'.
```

The default `rg.limit`

is 10,000. With this limit, and if
we have 1,000 columns in the model matrix, then the size of
`linfct`

is limited to about 80MB. If in addition, there is a
5-level multivariate response, the limit is 2GB – darn big, but perhaps
manageable. Even so, I suspect that the 10000-row default may be to
loose to guard against some users getting into a tight situation.

We have just seen that we can assign different weights to the levels
of containing factors. Another option is to constrain the effects of
those containing factors to zero. In essence, that means fitting a
different model without those containing effects; however, for certain
models (not all), an `emmGrid`

may be updated with a
`submodel`

specification so as to impose such a constraint.
For illustration, return again to the nutrition example, and consider
the analysis of `group`

and `race`

as before,
after removing interactions involving `age`

:

```
emmeans(nutr.lm, pairwise ~ group | race, submodel = ~ age + group*race) |>
summary(by = NULL)
```

```
## Note: adjust = "tukey" was changed to "sidak"
## because "tukey" is only appropriate for one set of pairwise comparisons
```

```
## $emmeans
## group race emmean SE df lower.CL upper.CL
## FoodStamps Black 4.91 2.061 92 0.817 9.003
## NoAid Black -3.01 1.581 92 -6.148 0.133
## FoodStamps Hispanic -1.18 5.413 92 -11.935 9.567
## NoAid Hispanic 1.32 3.876 92 -6.382 9.014
## FoodStamps White 4.10 0.901 92 2.308 5.886
## NoAid White -1.44 1.114 92 -3.654 0.771
##
## Results are averaged over the levels of: age
## submodel: ~ age + group + race + group:race
## Confidence level used: 0.95
##
## $contrasts
## contrast race estimate SE df t.ratio p.value
## FoodStamps - NoAid Black 7.92 2.62 92 3.021 0.0098
## FoodStamps - NoAid Hispanic -2.50 6.55 92 -0.382 0.9739
## FoodStamps - NoAid White 5.54 1.27 92 4.364 0.0001
##
## Results are averaged over the levels of: age
## P value adjustment: sidak method for 3 tests
```

If you like, you may confirm that we would obtain exactly the same
estimates if we had fitted that sub-model to the data, except we
continue to use the residual variance from the full model in tests and
confidence intervals. Without the interactions with `age`

,
all of the marginal means become estimable. The results are somewhat
different from those obtained earlier where we narrowed the scope to
just age 3. These new estimates include all ages, averaging over them
equally, but with constraints that the interaction effects involving
`age`

are all zero.

There are two special character values that may be used with
`submodel`

. Specifying `"minimal"`

creates a
submodel with only the active factors:

`emmeans(nutr.lm, ~ group * race, submodel = "minimal")`

```
## group race emmean SE df lower.CL upper.CL
## FoodStamps Black 5.000 2.020 92 0.988 9.012
## NoAid Black -1.929 1.428 92 -4.765 0.908
## FoodStamps Hispanic 0.000 5.344 92 -10.614 10.614
## NoAid Hispanic 2.500 3.779 92 -5.005 10.005
## FoodStamps White 4.769 0.741 92 3.297 6.241
## NoAid White -0.516 0.960 92 -2.422 1.390
##
## Results are averaged over the levels of: age
## submodel: ~ group + race + group:race
## Confidence level used: 0.95
```

This submodel constrains all effects involving `age`

to be
zero. Another interesting option is `"type2"`

, whereby we in
essence analyze the residuals of the model with all contained or
overlapping effects, then constrain the containing effects to be zero.
So what is left if only the interaction effects of the factors involved.
This is most useful with `joint_tests()`

:

`joint_tests(nutr.lm, submodel = "type2")`

```
## model term df1 df2 F.ratio p.value note
## age 3 92 0.961 0.4145
## group 1 92 23.044 <.0001
## race 2 92 0.196 0.8227
## age:group 3 92 1.069 0.3663
## age:race 3 92 1.019 0.3880 d e
## group:race 2 92 1.991 0.1424
##
## d: df1 reduced due to linear dependence
## e: df1 reduced due to non-estimability
```

These results are identical to the type II anova obtained at the beginning of this example.

More details on how `submodel`

works may be found in `vignette("xplanations")`

A factor `A`

is nested in another factor `B`

if
the levels of `A`

have a different meaning in one level of
`B`

than in another. Often, nested factors are random
effects—for example, subjects in an experiment may be randomly assigned
to treatments, in which case subjects are nested in treatments—and if we
model them as random effects, these random nested effects are not among
the fixed effects and are not an issue to `emmeans`

. But
sometimes we have fixed nested factors.

Here is an example of a fictional study of five fictional treatments for some disease in cows. Two of the treatments are administered by injection, and the other three are administered orally. There are varying numbers of observations for each drug. The data and model follow:

```
cows <- data.frame (
route = factor(rep(c("injection", "oral"), c(5, 9))),
drug = factor(rep(c("Bovineumab", "Charloisazepam",
"Angustatin", "Herefordmycin", "Mollycoddle"), c(3,2, 4,2,3))),
resp = c(34, 35, 34, 44, 43, 36, 33, 36, 32, 26, 25, 25, 24, 24)
)
cows.lm <- lm(resp ~ route + drug, data = cows)
```

The `ref_grid`

function finds a nested structure in this
model:

```
cows.rg <- ref_grid(cows.lm)
cows.rg
```

```
## 'emmGrid' object with variables:
## route = injection, oral
## drug = Angustatin, Bovineumab, Charloisazepam, Herefordmycin, Mollycoddle
## Nesting structure: drug %in% route
## Some things are non-estimable (null space dim = 1)
```

When there is nesting, `emmeans`

computes averages
separately in each group

```
route.emm <- emmeans(cows.rg, "route")
route.emm
```

```
## route emmean SE df lower.CL upper.CL
## injection 38.9 0.591 9 37.6 40.3
## oral 28.0 0.449 9 27.0 29.0
##
## Results are averaged over the levels of: drug
## Confidence level used: 0.95
```

… and insists on carrying along any grouping factors that a factor is nested in:

```
drug.emm <- emmeans(cows.rg, "drug")
drug.emm
```

```
## drug route emmean SE df lower.CL upper.CL
## Bovineumab injection 34.3 0.747 9 32.6 36.0
## Charloisazepam injection 43.5 0.915 9 41.4 45.6
## Angustatin oral 34.2 0.647 9 32.8 35.7
## Herefordmycin oral 25.5 0.915 9 23.4 27.6
## Mollycoddle oral 24.3 0.747 9 22.6 26.0
##
## Confidence level used: 0.95
```

Here are the associated pairwise comparisons:

`pairs(route.emm, reverse = TRUE)`

```
## contrast estimate SE df t.ratio p.value
## oral - injection -10.9 0.742 9 -14.671 <.0001
##
## Results are averaged over the levels of: drug
```

`pairs(drug.emm, by = "route", reverse = TRUE)`

```
## route = injection:
## contrast estimate SE df t.ratio p.value
## Charloisazepam - Bovineumab 9.17 1.182 9 7.757 <.0001
##
## route = oral:
## contrast estimate SE df t.ratio p.value
## Herefordmycin - Angustatin -8.75 1.121 9 -7.805 0.0001
## Mollycoddle - Angustatin -9.92 0.989 9 -10.030 <.0001
## Mollycoddle - Herefordmycin -1.17 1.182 9 -0.987 0.6026
##
## P value adjustment: tukey method for comparing a family of 3 estimates
```

In the latter result, the contrast itself becomes a nested factor in
the returned `emmGrid`

object. That would not be the case if
there had been no `by`

variable.

It can be very helpful to take advantage of special features of
**ggplot2** when graphing results with nested factors. For
example, the default plot for the `cows`

example is not
ideal:

`emmip(cows.rg, ~ drug | route)`

We can instead remove `route`

from the call and instead
handle it with **ggplot2** code to use separate *x*
scales:

```
require(ggplot2)
emmip(cows.rg, ~ drug) + facet_wrap(~ route, scales = "free_x")
```

Similarly with `plot.emmGrid()`

:

```
plot(drug.emm, PIs = TRUE) +
facet_wrap(~ route, nrow = 2, scales = "free_y")
```

`ref_grid()`

and `emmeans()`

tries to discover
and accommodate nested structures in the fixed effects. It does this in
two ways: first, by identifying factors whose levels appear in
combination with only one level of another factor; and second, by
examining the `terms`

attribute of the fixed effects. In the
latter approach, if an interaction `A:B`

appears in the model
but `A`

is not present as a main effect, then `A`

is deemed to be nested in `B`

. Note that this can create a
trap: some users take shortcuts by omitting some fixed effects, knowing
that this won’t affect the fitted values. But such shortcuts *do*
affect the interpretation of model parameters, ANOVA tables, etc., and I
advise against ever taking such shortcuts. Here are some ways you may
notice mistakenly-identified nesting:

- A message is displayed when nesting is detected
- A
`str()`

listing of the`emmGrid`

object shows a nesting component - An
`emmeans()`

summary unexpectedly includes one or more factors that you didn’t specify - EMMs obtained using
`by`

factors don’t seem to behave right, or give the same results with different specifications

To override the auto-detection of nested effects, use the
`nesting`

argument in `ref_grid()`

or
`emmeans()`

. Specifying `nesting = NULL`

will
ignore all nesting. Incorrectly-discovered nesting can be overcome by
specifying something akin to
`nesting = "A %in% B, C %in% (A * B)"`

or, equivalently,
`nesting = list(A = "B", C = c("A", "B"))`

.