NetworkManager D-Bus Interface Specification
Version 0.9
Copyright (C) 2008 - 2011 Red Hat, Inc.
Copyright (C) 2008 - 2009 Novell, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
Interfaces
org.freedesktop.NetworkManager
Methods:
Get the list of network devices.
Returns
devices -
ao-
List of object paths of network devices known to the system.
ActivateConnection (
o: connection, o: device, o: specific_object
) →
o
Activate a connection using the supplied device.
Parameters
connection -
o-
The connection to activate the devices with.
device -
o-
The object path of device to be activated for physical connections. This parameter is ignored for VPN connections, because the specific_object (if provided) specifies the device to use.
specific_object -
o-
The path of a connection-type-specific object this activation should use.
This parameter is currently ignored for wired and mobile broadband connections,
and the value of "/" should be used (ie, no specific object). For WiFi
connections, pass the object path of a specific AP from the card's scan
list, or "/" to pick and AP automatically. For VPN connections, pass
the object path of an ActiveConnection object that should serve as the
"base" connection (to which the VPN connections lifetime will be tied),
or pass "/" and NM will automatically use the current default device.
Returns
active_connection -
o-
The path of the active connection object representing this active connection.
Possible errors
org.freedesktop.NetworkManager.Error.UnknownConnection-
Connection was not provided by the settings service.
(generic description)
org.freedesktop.NetworkManager.Error.UnknownDevice-
Unknown device.
(generic description)
org.freedesktop.NetworkManager.Error.ConnectionActivating- Another connection is already activating or the same connection is already active. FIXME: check if the error name is correct. FIXME: split into 2 errors?
org.freedesktop.NetworkManager.Error.ConnectionInvalid- The connection is invalid for this device.
AddAndActivateConnection (
a{sa{sv}}: connection, o: device, o: specific_object
) →
o, o
Adds a new connection using the given details (if any) as a template
(automatically filling in missing settings with the capabilities of the
given device and specific object), then activate the new connection.
Cannot be used for VPN connections at this time.
Parameters
connection -
a{sa{sv}}-
Connection settings and properties; if incomplete missing settings will
be automatically completed using the given device and specific object.
device -
o-
The object path of device to be activated using the given connection.
specific_object -
o-
The path of a connection-type-specific object this activation should use.
This parameter is currently ignored for wired and mobile broadband connections,
and the value of "/" should be used (ie, no specific object). For WiFi
connections, pass the object path of a specific AP from the card's scan
list, which will be used to complete the details of the newly added
connection.
Returns
path -
o-
Object path of the new connection that was just added.
active_connection -
o-
The path of the active connection object representing this active connection.
Possible errors
org.freedesktop.NetworkManager.Error.UnknownConnection-
Connection was not provided by the settings service.
(generic description)
org.freedesktop.NetworkManager.Error.UnknownDevice-
Unknown device.
(generic description)
org.freedesktop.NetworkManager.Error.ConnectionInvalid- The connection is invalid for this device.
Deactivate an active connection.
Parameters
active_connection -
o-
The currently active connection to deactivate.
Sleep (
b: sleep
) →
nothing
Control the NetworkManager daemon's sleep state. When asleep, all
interfaces that it manages are deactivated. When awake, devices are
available to be activated. This command should not be called directly
by users or clients; it is intended for system suspend/resume tracking.
Parameters
sleep -
b-
Indicates whether the NetworkManager daemon should sleep or wake.
Enable (
b: enable
) →
nothing
Control whether overall networking is enabled or disabled. When
disabled, all interfaces that NM manages are deactivated. When enabled,
all managed interfaces are re-enabled and available to be activated.
This command should be used by clients that provide to users the ability
to enable/disable all networking.
Parameters
enable -
b-
If FALSE, indicates that all networking should be disabled. If TRUE,
indicates that NetworkManager should begin managing network devices.
Returns the permissions a caller has for various authenticated operations
that NetworkManager provides, like Enable/Disable networking, changing
WiFi, WWAN, and WiMAX state, etc.
Returns
permissions -
a{ss}-
Dictionary of available permissions and results. Each permission
is represented by a name (ie "org.freedesktop.NetworkManager.Foobar")
and each result is one of the following values: "yes" (the permission
is available), "auth" (the permission is available after a successful
authentication), or "no" (the permission is denied). Clients may use
these values in the UI to indicate the ability to perform certain
operations.
SetLogging (
s: level, s: domains
) →
nothing
Set logging verbosity and which operations are logged.
Parameters
level -
s-
One of [ERR, WARN, INFO, DEBUG].
domains -
s-
A combination of logging domains separated by commas (','), or "NONE"
to disable logging. Each domain enables logging for operations
related to that domain. Available domains are: [NONE, HW, RFKILL,
ETHER, WIFI, BT, MB, DHCP4, DHCP6, PPP, WIFI_SCAN, IP4, IP6, AUTOIP4,
DNS, VPN, SHARING, SUPPLICANT, USER_SET, SYS_SET, SUSPEND, CORE,
DEVICE, OLPC]
The overall networking state as determined by the NetworkManager daemon,
based on the state of network devices under it's management.
Signals:
Emitted when system authorization details change, indicating that
clients may wish to recheck permissions with GetPermissions.
NetworkManager's state changed.
Parameters
state -
u
(NM_STATE)
-
The new state of NetworkManager.
NetworkManager's properties changed.
A device was added to the system
Parameters
device_path -
o-
The object path of the newly added device.
A device was removed from the system, and is no longer available.
Parameters
device_path -
o-
The object path of the device that was just removed.
Properties:
NetworkingEnabled -
b -
(read)-
Indicates if overall networking is currently enabled or not. See the
Enable() method.
WirelessEnabled -
b -
(readwrite)-
Indicates if wireless is currently enabled or not.
WirelessHardwareEnabled -
b -
(read)-
Indicates if the wireless hardware is currently enabled, i.e. the state of the RF kill switch.
WwanEnabled -
b -
(readwrite)-
Indicates if mobile broadband devices are currently enabled or not.
WwanHardwareEnabled -
b -
(read)-
Indicates if the mobile broadband hardware is currently enabled, i.e. the state of the RF kill switch.
WimaxEnabled -
b -
(readwrite)-
Indicates if WiMAX devices are currently enabled or not.
WimaxHardwareEnabled -
b -
(read)-
Indicates if the WiMAX hardware is currently enabled, i.e. the state of the RF kill switch.
ActiveConnections -
ao -
(read)-
List of active connection object paths.
Version -
s -
(read)-
NetworkManager version.
State -
u -
(read)
(NM_STATE)
-
The overall state of the NetworkManager daemon.
Enumerated types:
Describes the overall state of the daemon.
NM_STATE_UNKNOWN = 0-
Networking state is unknown.
NM_STATE_ASLEEP = 10-
Networking is inactive and all devices are disabled.
NM_STATE_DISCONNECTED = 20-
There is no active network connection.
NM_STATE_DISCONNECTING = 30-
Network connections are being cleaned up.
NM_STATE_CONNECTING = 40-
A network device is connecting to a network and there is no other
available network connection.
NM_STATE_CONNECTED_LOCAL = 50-
A network device is connected, but there is only link-local connectivity.
NM_STATE_CONNECTED_SITE = 60-
A network device is connected, but there is only site-local connectivity.
NM_STATE_CONNECTED_GLOBAL = 70-
A network device is connected, with global network connectivity.
org.freedesktop.NetworkManager.AccessPoint
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Properties:
Flags -
u -
(read)
(NM_802_11_AP_FLAGS)
- Flags describing the capabilities of the access point.
WpaFlags -
u -
(read)
(NM_802_11_AP_SEC)
- Flags describing the access point's capabilities according to WPA (Wifi Protected Access).
RsnFlags -
u -
(read)
(NM_802_11_AP_SEC)
- Flags describing the access point's capabilities according to the RSN (Robust Secure Network) protocol.
Ssid -
ay -
(read)- The Service Set Identifier identifying the access point.
Frequency -
u -
(read)- The radio channel frequency in use by the access point, in MHz.
HwAddress -
s -
(read)- The hardware address (BSSID) of the access point.
Mode -
u -
(read)
(NM_802_11_MODE)
- Describes the operating mode of the access point.
MaxBitrate -
u -
(read)- The maximum bitrate this access point is capable of, in kilobits/second (Kb/s).
Strength -
y -
(read)- The current signal quality of the access point, in percent.
Sets of flags:
Flags describing the general capabilities of the access point.
NM_802_11_AP_FLAGS_NONE = 0x0- Null capability - says nothing about the access point.
NM_802_11_AP_FLAGS_PRIVACY = 0x1- Access point supports privacy measures.
Flags describing the security capabilities of the access point.
NM_802_11_AP_SEC_NONE = 0x0- Null flag.
NM_802_11_AP_SEC_PAIR_WEP40 = 0x1- Access point supports pairwise 40-bit WEP encryption.
NM_802_11_AP_SEC_PAIR_WEP104 = 0x2- Access point supports pairwise 104-bit WEP encryption.
NM_802_11_AP_SEC_PAIR_TKIP = 0x4- Access point supports pairwise TKIP encryption.
NM_802_11_AP_SEC_PAIR_CCMP = 0x8- Access point supports pairwise CCMP encryption.
NM_802_11_AP_SEC_GROUP_WEP40 = 0x10- Access point supports a group 40-bit WEP cipher.
NM_802_11_AP_SEC_GROUP_WEP104 = 0x20- Access point supports a group 104-bit WEP cipher.
NM_802_11_AP_SEC_GROUP_TKIP = 0x40- Access point supports a group TKIP cipher.
NM_802_11_AP_SEC_GROUP_CCMP = 0x80- Access point supports a group CCMP cipher.
NM_802_11_AP_SEC_KEY_MGMT_PSK = 0x100- Access point supports PSK key management.
NM_802_11_AP_SEC_KEY_MGMT_802_1X = 0x200- Access point supports 802.1x key management.
org.freedesktop.NetworkManager.Device
Methods:
Disconnects a device and prevents the device from automatically activating further connections without user intervention.
Signals:
Properties:
Udi -
s -
(read)-
Unique Device Identifier.
Interface -
s -
(read)-
The name of the device's control (and often data) interface.
IpInterface -
s -
(read)-
The name of the device's data interface when available. This property
may not refer to the actual data interface until the device has
successfully established a data connection, indicated by the device's
State becoming ACTIVATED.
Driver -
s -
(read)-
The driver handling the device.
Capabilities -
u -
(read)
(NM_DEVICE_CAP)
-
Flags describing the capabilities of the device.
Ip4Address -
i -
(read)-
The IPv4 address bound to the device. FIXME: what about devices with >1 IP address?
State -
u -
(read)
(NM_DEVICE_STATE)
-
The current state of the device.
Ip4Config -
o -
(read)-
Object path of the Ip4Config object describing the configuration of the device. Only valid when the device is in the NM_DEVICE_STATE_ACTIVATED state.
Dhcp4Config -
o -
(read)-
Object path of the Dhcp4Config object describing the DHCP options returned by the DHCP server. Only valid when the device is in the NM_DEVICE_STATE_ACTIVATED state.
Ip6Config -
o -
(read)-
Object path of the Ip6Config object describing the configuration of the device. Only valid when the device is in the NM_DEVICE_STATE_ACTIVATED state.
Managed -
b -
(read)-
Whether or not this device is managed by NetworkManager.
FirmwareMissing -
b -
(read)-
If TRUE, indicates the device is likely missing firmware necessary for
its operation.
DeviceType -
u -
(read)
(NM_DEVICE_TYPE)
-
The general type of the network device; ie Ethernet, WiFi, etc.
Enumerated types:
NM_DEVICE_STATE_UNKNOWN = 0-
The device is in an unknown state.
NM_DEVICE_STATE_UNMANAGED = 10-
The device is recognized but not managed by NetworkManager.
NM_DEVICE_STATE_UNAVAILABLE = 20-
The device cannot be used (carrier off, rfkill, etc).
NM_DEVICE_STATE_DISCONNECTED = 30-
The device is not connected.
NM_DEVICE_STATE_PREPARE = 40-
The device is preparing to connect.
NM_DEVICE_STATE_CONFIG = 50-
The device is being configured.
NM_DEVICE_STATE_NEED_AUTH = 60-
The device is awaiting secrets necessary to continue connection.
NM_DEVICE_STATE_IP_CONFIG = 70-
The IP settings of the device are being requested and configured.
NM_DEVICE_STATE_IP_CHECK = 80-
The device's IP connectivity ability is being determined.
NM_DEVICE_STATE_SECONDARIES = 90-
The device is waiting for secondary connections to be activated.
NM_DEVICE_STATE_ACTIVATED = 100-
The device is active.
NM_DEVICE_STATE_DEACTIVATING = 110-
The device's network connection is being torn down.
NM_DEVICE_STATE_FAILED = 120-
The device is in a failure state following an attempt to activate it.
NM_DEVICE_TYPE_UNKNOWN = 0-
The device type is unknown.
NM_DEVICE_TYPE_ETHERNET = 1-
The device is wired Ethernet device.
NM_DEVICE_TYPE_WIFI = 2-
The device is an 802.11 WiFi device.
NM_DEVICE_TYPE_UNUSED1 = 3- Unused
NM_DEVICE_TYPE_UNUSED2 = 4- Unused
NM_DEVICE_TYPE_BT = 5-
The device is Bluetooth device that provides PAN or DUN capabilities.
NM_DEVICE_TYPE_OLPC_MESH = 6-
The device is an OLPC mesh networking device.
NM_DEVICE_TYPE_WIMAX = 7-
The device is an 802.16e Mobile WiMAX device.
NM_DEVICE_TYPE_MODEM = 8-
The device is a modem supporting one or more of analog telephone,
CDMA/EVDO, GSM/UMTS/HSPA, or LTE standards to access a cellular or
wireline data network.
NM_DEVICE_STATE_REASON_UNKNOWN = 0-
The reason for the device state change is unknown.
NM_DEVICE_STATE_REASON_NONE = 1-
The state change is normal.
NM_DEVICE_STATE_REASON_NOW_MANAGED = 2-
The device is now managed.
NM_DEVICE_STATE_REASON_NOW_UNMANAGED = 3-
The device is no longer managed.
NM_DEVICE_STATE_REASON_CONFIG_FAILED = 4-
The device could not be readied for configuration.
NM_DEVICE_STATE_REASON_CONFIG_UNAVAILABLE = 5-
IP configuration could not be reserved (no available address, timeout, etc).
NM_DEVICE_STATE_REASON_CONFIG_EXPIRED = 6-
The IP configuration is no longer valid.
NM_DEVICE_STATE_REASON_NO_SECRETS = 7-
Secrets were required, but not provided.
NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT = 8-
The 802.1X supplicant disconnected from the access point or authentication server.
NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED = 9-
Configuration of the 802.1X supplicant failed.
NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED = 10-
The 802.1X supplicant quit or failed unexpectedly.
NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT = 11-
The 802.1X supplicant took too long to authenticate.
NM_DEVICE_STATE_REASON_PPP_START_FAILED = 12-
The PPP service failed to start within the allowed time.
NM_DEVICE_STATE_REASON_PPP_DISCONNECT = 13-
The PPP service disconnected unexpectedly.
NM_DEVICE_STATE_REASON_PPP_FAILED = 14-
The PPP service quit or failed unexpectedly.
NM_DEVICE_STATE_REASON_DHCP_START_FAILED = 15-
The DHCP service failed to start within the allowed time.
NM_DEVICE_STATE_REASON_DHCP_ERROR = 16-
The DHCP service reported an unexpected error.
NM_DEVICE_STATE_REASON_DHCP_FAILED = 17-
The DHCP service quit or failed unexpectedly.
NM_DEVICE_STATE_REASON_SHARED_START_FAILED = 18-
The shared connection service failed to start.
NM_DEVICE_STATE_REASON_SHARED_FAILED = 19-
The shared connection service quit or failed unexpectedly.
NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED = 20-
The AutoIP service failed to start.
NM_DEVICE_STATE_REASON_AUTOIP_ERROR = 21-
The AutoIP service reported an unexpected error.
NM_DEVICE_STATE_REASON_AUTOIP_FAILED = 22-
The AutoIP service quit or failed unexpectedly.
NM_DEVICE_STATE_REASON_MODEM_BUSY = 23-
Dialing failed because the line was busy.
NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE = 24-
Dialing failed because there was no dial tone.
NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER = 25-
Dialing failed because there was carrier.
NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT = 26-
Dialing timed out.
NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED = 27-
Dialing failed.
NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED = 28-
Modem initialization failed.
NM_DEVICE_STATE_REASON_GSM_APN_FAILED = 29-
Failed to select the specified GSM APN.
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING = 30-
Not searching for networks.
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED = 31-
Network registration was denied.
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT = 32-
Network registration timed out.
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED = 33-
Failed to register with the requested GSM network.
NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED = 34-
PIN check failed.
NM_DEVICE_STATE_REASON_FIRMWARE_MISSING = 35-
Necessary firmware for the device may be missing.
NM_DEVICE_STATE_REASON_REMOVED = 36-
The device was removed.
NM_DEVICE_STATE_REASON_SLEEPING = 37-
NetworkManager went to sleep.
NM_DEVICE_STATE_REASON_CONNECTION_REMOVED = 38-
The device's active connection was removed or disappeared.
NM_DEVICE_STATE_REASON_USER_REQUESTED = 39-
A user or client requested the disconnection.
NM_DEVICE_STATE_REASON_CARRIER = 40-
The device's carrier/link changed.
NM_DEVICE_STATE_REASON_CONNECTION_ASSUMED = 41-
The device's existing connection was assumed.
NM_DEVICE_STATE_REASON_SUPPLICANT_AVAILABLE = 42-
The 802.1x supplicant is now available.
NM_DEVICE_STATE_REASON_MODEM_NOT_FOUND = 43-
The modem could not be found.
NM_DEVICE_STATE_REASON_BT_FAILED = 44-
The Bluetooth connection timed out or failed.
Sets of flags:
NM_DEVICE_CAP_NONE = 0x0- Null capability.
NM_DEVICE_CAP_NM_SUPPORTED = 0x1- The device is supported by NetworkManager.
NM_DEVICE_CAP_CARRIER_DETECT = 0x2- The device supports carrier detection.
org.freedesktop.NetworkManager.Device.Wired
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Properties:
HwAddress -
s -
(read)-
Active hardware address of the device.
PermHwAddress -
s -
(read)-
Permanent hardware address of the device.
Speed -
u -
(read)-
Design speed of the device, in megabits/second (Mb/s).
Carrier -
b -
(read)-
Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
org.freedesktop.NetworkManager.Device.Wireless
Methods:
Get the list of access points visible to this device.
Returns
access_points -
ao-
List of access point object paths
Signals:
Emitted when the wireless device's properties changed.
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary containing the FIXME: check changed parameters.
Emitted when a new access point is found by the device.
Parameters
access_point -
o-
The object path of the newly found access point.
Emitted when an access point disappears from view of the device.
Parameters
access_point -
o-
The object path of the access point that has disappeared.
Properties:
HwAddress -
s -
(read)-
The active hardware address of the device.
PermHwAddress -
s -
(read)-
The permanent hardware address of the device.
Mode -
u -
(read)
(NM_802_11_MODE)
-
The operating mode of the wireless device.
Bitrate -
u -
(read)-
The bit rate currently used by the wireless device, in kilobits/second (Kb/s).
ActiveAccessPoint -
o -
(read)-
Object path of the access point currently used by the wireless device.
WirelessCapabilities -
u -
(read)
(NM_802_11_DEVICE_CAP)
-
The capabilities of the wireless device.
Sets of flags:
Flags describing the capabilities of a wireless device.
NM_802_11_DEVICE_CAP_NONE = 0x0- Null capability - syntactic sugar for no capabilities supported. Do not AND this with other capabilities!
NM_802_11_DEVICE_CAP_CIPHER_WEP40 = 0x1- The device supports the 40-bit WEP cipher.
NM_802_11_DEVICE_CAP_CIPHER_WEP104 = 0x2- The device supports the 104-bit WEP cipher.
NM_802_11_DEVICE_CAP_CIPHER_TKIP = 0x4- The device supports the TKIP cipher.
NM_802_11_DEVICE_CAP_CIPHER_CCMP = 0x8- The device supports the CCMP cipher.
NM_802_11_DEVICE_CAP_WPA = 0x10- The device supports the WPA encryption/authentication protocol.
NM_802_11_DEVICE_CAP_RSN = 0x20- The device supports the RSN encryption/authentication protocol.
org.freedesktop.NetworkManager.Device.Modem
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Properties:
ModemCapabilities -
u -
(read)
(NM_DEVICE_MODEM_CAPABILITIES)
-
The generic family of access technologies the modem supports. Not all
capabilities are available at the same time however; some modems require
a firmware reload or other reinitialization to switch between eg CDMA/EVDO
and GSM/UMTS.
CurrentCapabilities -
u -
(read)
(NM_DEVICE_MODEM_CAPABILITIES)
-
The generic family of access technologies the modem currently supports
without a firmware reload or reinitialization.
Sets of flags:
Flags describing one or more of the general access technology families
that a modem device supports.
NM_DEVICE_MODEM_CAPABILITY_NONE = 0x0- Modem has no capabilties.
NM_DEVICE_MODEM_CAPABILITY_POTS = 0x1-
Modem supports the analog wired telephone network (ie 56k dialup) and
does not have wireless/cellular capabilities.
NM_DEVICE_MODEM_CAPABILITY_CDMA_EVDO = 0x2-
Modem supports at least one of CDMA 1xRTT, EVDO revision 0, EVDO
revision A, or EVDO revision B.
NM_DEVICE_MODEM_CAPABILITY_GSM_UMTS = 0x4-
Modem supports at least one of GSM, GPRS, EDGE, UMTS, HSDPA, HSUPA, or
HSPA+ packet switched data capability.
NM_DEVICE_MODEM_CAPABILITY_LTE = 0x8-
Modem has at LTE data capability.
org.freedesktop.NetworkManager.Device.Bluetooth
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Properties:
HwAddress -
s -
(read)-
Bluetooth hardware address of the device.
Name -
s -
(read)-
Bluetooth name of the device.
BtCapabilities -
u -
(read)
(NM_BT_CAPABILITIES)
-
Bluetooth capabilities of the device (either DUN or NAP).
Sets of flags:
Flags describing the capabilities of a Bluetooth device.
NM_BT_CAPABILITY_NONE = 0x0- The device has no recognized capabilities.
NM_BT_CAPABILITY_DUN = 0x1- The device supports Bluetooth Dial-Up Networking.
NM_BT_CAPABILITY_PAN = 0x2- The device supports Bluetooth Personal Area Networking.
org.freedesktop.NetworkManager.Device.OlpcMesh
Interface has no methods.
Signals:
Emitted when the wireless device's properties changed.
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary containing the FIXME: check changed parameters.
Properties:
HwAddress -
s -
(read)-
The hardware address of the device.
Companion -
o -
(read)-
The object path of the companion device.
ActiveChannel -
u -
(read)-
The currently active channel.
org.freedesktop.NetworkManager.Device.WiMax
Methods:
Get the list of NSPs visible to this device.
Returns
nsps -
ao-
List of NSP object paths
Signals:
Emitted when the WiMax device's properties changed.
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values.
Emitted when a new NSP is found by the device.
Parameters
nsp -
o-
The object path of the newly found NSP.
Emitted when an NSP disappears from view of the device.
Parameters
nsp -
o-
The object path of the NSP that has disappeared.
Properties:
HwAddress -
s -
(read)-
Hardware address of the device.
CenterFrequency -
u -
(read)-
Center frequency (in KHz) of the radio channel the device is using to
communicate with the network when connected. Has no meaning when the
device is not connected.
Rssi -
i -
(read)-
RSSI of the current radio link in dBm. This value indicates how strong
the raw received RF signal from the base station is, but does not
indicate the overall quality of the radio link. Has no meaning when the
device is not connected.
Cinr -
i -
(read)-
CINR (Carrier to Interference + Noise Ratio) of the current radio link
in dB. CINR is a more accurate measure of radio link quality. Has no
meaning when the device is not connected.
TxPower -
i -
(read)-
Average power of the last burst transmitted by the device, in units of
0.5 dBm. i.e. a TxPower of -11 represents an actual device TX power of
-5.5 dBm. Has no meaning when the device is not connected.
Bsid -
s -
(read)-
The ID of the serving base station as received from the network. Has
no meaning when the device is not connected.
ActiveNsp -
o -
(read)-
Object path of the NSP currently used by the WiMax device.
org.freedesktop.NetworkManager.WiMax.Nsp
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values.
Properties:
Name -
s -
(read)- The name of the NSP.
SignalQuality -
u -
(read)- The current signal quality of the NSP, in percent.
NetworkType -
u -
(read)
(NM_WIMAX_NSP_NETWORK_TYPE)
- The network type of the NSP.
Sets of flags:
Network type of the NSP.
NM_WIMAX_NSP_NETWORK_TYPE_UNKNOWN = 0x0- Unknown network.
NM_WIMAX_NSP_NETWORK_TYPE_HOME = 0x1- Home network.
NM_WIMAX_NSP_NETWORK_TYPE_PARTNER = 0x2- Partner network.
NM_WIMAX_NSP_NETWORK_TYPE_ROAMING_PARTNER = 0x3- Roaming partner network.
org.freedesktop.NetworkManager.IP4Config
Interface has no methods.
Interface has no signals.
Properties:
Addresses -
aau -
(read)- Array of tuples of IPv4 address/prefix/gateway. All 3
elements of each tuple are in network byte order. Essentially:
[(addr, prefix, gateway), (addr, prefix, gateway), ...]
Nameservers -
au -
(read)- The nameservers in use.
WinsServers -
au -
(read)- The Windows Internet Name Service servers associated with the connection. Each address is in network byte order.
Domains -
as -
(read)- A list of domains this address belongs to.
Routes -
aau -
(read)- Tuples of IPv4 route/prefix/next-hop/metric. All 4 elements
of each tuple are in network byte order. 'route' and 'next hop' are IPv4
addresses, while prefix and metric are simple unsigned integers. Essentially:
[(route, prefix, next-hop, metric), (route, prefix, next-hop, metric), ...]
org.freedesktop.NetworkManager.IP6Config
Interface has no methods.
Interface has no signals.
Properties:
Addresses -
a(ayuay) -
(read)- Tuples of IPv6 address/prefix/gateway.
Nameservers -
aay -
(read)- The nameservers in use.
Domains -
as -
(read)- A list of domains this address belongs to.
Routes -
a(ayuayu) -
(read)- Tuples of IPv6 route/prefix/next-hop/metric.
org.freedesktop.NetworkManager.DHCP4Config
Options and configuration returned by the IPv4 DHCP server.
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Properties:
Options -
a{sv} -
(read)- Configuration options returned by a DHCP server, if any.
org.freedesktop.NetworkManager.DHCP6Config
Options and configuration returned by the IPv6 DHCP server.
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Properties:
Options -
a{sv} -
(read)- Configuration options returned by a DHCP server, if any.
org.freedesktop.NetworkManager.Settings
The Settings interface allows clients to view and administrate the connections stored and used by NetworkManager.
Methods:
List the connections stored by this Settings object.
Returns
connections -
ao-
List of connections.
AddConnection (
a{sa{sv}}: connection
) →
o
Add new connection.
Parameters
connection -
a{sa{sv}}-
Connection settings and properties.
Returns
path -
o-
Object path of the new connection that was just added.
SaveHostname (
s: hostname
) →
nothing
Save the hostname to persistent configuration.
Parameters
hostname -
s-
The hostname to save to persistent configuration. If blank, the persistent hostname is cleared.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Emitted when a new connection has been added.
Parameters
connection -
o-
Object path of the new connection.
Properties:
Hostname -
s -
(read)-
The machine hostname stored in persistent configuration.
CanModify -
b -
(read)-
If true, adding and modifying connections is supported.
org.freedesktop.NetworkManager.Settings.Connection
Represents a single network connection configuration.
Methods:
Update (
a{sa{sv}}: properties
) →
nothing
Update the connection with new settings and properties, replacing
all previous settings and properties. Secrets may be part of the
update request, and will be either stored in persistent storage or
given to a Secret Agent for storage, depending on the request.
Parameters
properties -
a{sa{sv}}-
New connection settings, properties, and (optionally) secrets.
Delete (
) →
nothing
Delete the connection.
Get the settings maps describing this network configuration.
This will never include any secrets required for connection
to the network, as those are often protected. Secrets must
be requested separately using the GetSecrets() call.
GetSecrets (
s: setting_name
) →
a{sa{sv}}
Get the secrets belonging to this network configuration. Only
secrets from persistent storage or a Secret Agent running in
the requestor's session will be returned. The user will never
be prompted for secrets as a result of this request.
Parameters
setting_name -
s-
Name of the setting to return secrets for. If empty, all
all secrets will be returned.
Signals:
Emitted when any settings or permissions change. When handling
this signal, clients should re-read the connection using the
GetSettings method to get the changes and to ensure the client
still has permission to access the connection.
Emitted when this connection is no longer available. This
happens when the connection is deleted or if it is no longer
accessable by any of the system's logged-in users. After
receipt of this signal, the object no longer exists.
Interface has no properties.
org.freedesktop.NetworkManager.Connection.Active
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Properties:
Connection -
o -
(read)- The path of the connection.
SpecificObject -
o -
(read)- A specific object associated with the active connection.
Devices -
ao -
(read)- Array of object paths representing devices which are part of this active connection.
State -
u -
(read)
(NM_ACTIVE_CONNECTION_STATE)
- The state of this active connection.
Default -
b -
(read)- Whether this active connection is the default IPv4 connection, i.e. whether it currently owns the default IPv4 route.
Default6 -
b -
(read)- Whether this active connection is the default IPv6 connection, i.e. whether it currently owns the default IPv6 route.
Vpn -
b -
(read)- Whether this active connection is also a VPN connection.
Enumerated types:
NM_ACTIVE_CONNECTION_STATE_UNKNOWN = 0-
The active connection is in an unknown state.
NM_ACTIVE_CONNECTION_STATE_ACTIVATING = 1-
The connection is activating.
NM_ACTIVE_CONNECTION_STATE_ACTIVATED = 2-
The connection is activated.
org.freedesktop.NetworkManager.AgentManager
Methods:
Register (
s: identifier
) →
nothing
Called by secret Agents to register their ability to provide and save
network secrets.
Parameters
identifier -
s-
Identifies this agent; only one agent in each user session may use the
same identifier. Identifier formatting follows the same rules as
D-Bus bus names with the exception that the ':' character is not
allowed. The valid set of characters is "[A-Z][a-z][0-9]_-." and the
identifier is limited in length to 255 characters with a minimum
of 3 characters. An example valid identifier is 'org.gnome.nm-applet'
(without quotes).
Called by secret Agents to notify NetworkManager that they will no
longer handle requests for network secrets. Agents are automatically
unregistered when they disconnect from D-Bus.
Interface has no signals.
Interface has no properties.
org.freedesktop.NetworkManager.VPN.Connection
Represents an active connection to a Virtual Private Network.
Interface has no methods.
Signals:
Parameters
properties -
a{sv}
(String_Variant_Map)
-
A dictionary mapping property names to variant boxed values
Emitted when the state of the VPN connection has changed.
Properties:
VpnState -
u -
(read)
(NM_VPN_CONNECTION_STATE)
- The VPN-specific state of the connection.
Banner -
s -
(read)- The banner string of the VPN connection.
Enumerated types:
NM_VPN_CONNECTION_STATE_UNKNOWN = 0-
The state of the VPN connection is unknown.
NM_VPN_CONNECTION_STATE_PREPARE = 1-
The VPN connection is preparing to connect.
NM_VPN_CONNECTION_STATE_NEED_AUTH = 2-
The VPN connection needs authorization credentials.
NM_VPN_CONNECTION_STATE_CONNECT = 3-
The VPN connection is being established. FIXME: Should be CONNECTING or CONNECTED.
NM_VPN_CONNECTION_STATE_IP_CONFIG_GET = 4-
The VPN connection is getting an IP address. FIXME: Should be an -ING
NM_VPN_CONNECTION_STATE_ACTIVATED = 5-
The VPN connection is active.
NM_VPN_CONNECTION_STATE_FAILED = 6-
The VPN connection failed.
NM_VPN_CONNECTION_STATE_DISCONNECTED = 7-
The VPN connection is disconnected.
NM_VPN_CONNECTION_STATE_REASON_UNKNOWN = 0-
The reason for the VPN connection state change is unknown.
NM_VPN_CONNECTION_STATE_REASON_NONE = 1-
No reason was given for the VPN connection state change.
NM_VPN_CONNECTION_STATE_REASON_USER_DISCONNECTED = 2-
The VPN connection changed state because the user disconnected it.
NM_VPN_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED = 3-
The VPN connection changed state because the device it was using was disconnected.
NM_VPN_CONNECTION_STATE_REASON_SERVICE_STOPPED = 4-
The service providing the VPN connection was stopped.
NM_VPN_CONNECTION_STATE_REASON_IP_CONFIG_INVALID = 5-
The IP config of the VPN connection was invalid.
NM_VPN_CONNECTION_STATE_REASON_CONNECT_TIMEOUT = 6-
The connection attempt to the VPN service timed out.
NM_VPN_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT = 7-
A timeout occurred while starting the service providing the VPN connection.
NM_VPN_CONNECTION_STATE_REASON_SERVICE_START_FAILED = 8-
Starting the service starting the service providing the VPN connection failed.
NM_VPN_CONNECTION_STATE_REASON_NO_SECRETS = 9-
Necessary secrets for the VPN connection were not provided.
NM_VPN_CONNECTION_STATE_REASON_LOGIN_FAILED = 10-
Authentication to the VPN server failed.
NM_VPN_CONNECTION_STATE_REASON_CONNECTION_REMOVED = 11-
The connection was deleted from settings.
org.freedesktop.NetworkManager.VPN.Plugin
This interface is provided by plugins providing VPN services to the NetworkManager daemon.
Methods:
Connect (
a{sa{sv}}: connection
) →
nothing
Tells the plugin to connect.
Possible errors
org.freedesktop.NetworkManager.VPN.Error.StartingInProgress- The request could not be processed because the VPN connection is already being started.(generic description)
org.freedesktop.NetworkManager.VPN.Error.AlreadyStarted- The request could not be processed because a VPN connection was already active.(generic description)
org.freedesktop.NetworkManager.VPN.Error.StoppingInProgress- The request could not be processed because the VPN connection is already being stopped.(generic description)
org.freedesktop.NetworkManager.VPN.Error.BadArguments- Invalid arguments were passed with the request. FIXME: too general.(generic description)
org.freedesktop.NetworkManager.VPN.Error.LaunchFailed- A binary providing the service failed to launch.(generic description)
NeedSecrets (
a{sa{sv}}: settings
) →
s
Asks the plugin whether the provided connection will require secrets to connect successfully.
Returns
setting_name -
s-
The setting name within the provided connection that requires secrets, if any.
Possible errors
org.freedesktop.NetworkManager.VPN.Error.ConnectionInvalid- The request could not be processed because the VPN connection settings were invalid.(generic description)
Disconnect the plugin.
Possible errors
org.freedesktop.NetworkManager.VPN.Error.StoppingInProgress- The request could not be processed because the VPN connection is already being stopped.(generic description)
org.freedesktop.NetworkManager.VPN.Error.AlreadyStopped- The request could not be processed because the VPN connection was already stopped.(generic description)
SetIp4Config (
a{sv}: config
) →
nothing
Set IPv4 details on the connection.
SetFailure (
s: reason
) →
nothing
Indicate a failure to the plugin.
Parameters
reason -
s-
The reason for the failure.
Signals:
Emitted when the plugin state changes.
Ip4Config (
a{sv}: ip4config
)
The plugin obtained an IPv4 configuration.
Emitted when the plugin receives a login banner from the VPN service.
Parameters
banner -
s-
The login banner string.
Emitted when a failure in the VPN plugin occurs.
Properties:
State -
u -
(read)
(NM_VPN_CONNECTION_STATE)
-
The state of the plugin.
Enumerated types:
NM_VPN_PLUGIN_FAILURE_LOGIN_FAILED = 0-
Login failed.
NM_VPN_PLUGIN_FAILURE_CONNECT_FAILED = 1-
Connect failed.
NM_VPN_PLUGIN_FAILURE_BAD_IP_CONFIG = 2-
Invalid IP configuration returned from the VPN plugin.
Generic types:
Enumerated types:
NM_802_11_MODE_UNKNOWN = 0- Mode is unknown.
NM_802_11_MODE_ADHOC = 1- Uncoordinated network without central infrastructure.
NM_802_11_MODE_INFRA = 2- Coordinated network with one or more central controllers.
Mapping types:
A mapping from strings to variants representing extra
key-value pairs.
Members
Key -
s- (undocumented)
Value -
v- (undocumented)
A mapping from strings to strings representing extra
key-value pairs.
Members
Key -
s- (undocumented)
Value -
s- (undocumented)
A mapping from strings to a map of string to variant.
Errors:
org.freedesktop.NetworkManager.Error.UnknownConnection
Connection was not provided by the settings service.
org.freedesktop.NetworkManager.Error.UnknownDevice
Unknown device.
org.freedesktop.NetworkManager.Error.PermissionDenied
User does not have the permission to activate this connection.
Errors:
org.freedesktop.NetworkManager.VPN.Error.General
This is a drab, nondescript error.
org.freedesktop.NetworkManager.VPN.Error.StartingInProgress
The request could not be processed because the VPN connection is already being started.
org.freedesktop.NetworkManager.VPN.Error.AlreadyStarted
The request could not be processed because a VPN connection was already active.
org.freedesktop.NetworkManager.VPN.Error.StoppingInProgress
The request could not be processed because the VPN connection is already being stopped.
org.freedesktop.NetworkManager.VPN.Error.AlreadyStopped
The request could not be processed because the VPN connection was already stopped.
org.freedesktop.NetworkManager.VPN.Error.WrongState
The request could not be processed because the VPN connection is in the wrong state for this type of request. FIXME: too general?
org.freedesktop.NetworkManager.VPN.Error.BadArguments
Invalid arguments were passed with the request. FIXME: too general.
org.freedesktop.NetworkManager.VPN.Error.LaunchFailed
A binary providing the service failed to launch.
org.freedesktop.NetworkManager.VPN.Error.ConnectionInvalid
The request could not be processed because the VPN connection settings were invalid.
Index
Index of interfaces
Index of types